Items where Division is "Faculty of Manufacturing Engineering" and Year is 2019

Article

A. Perumal, Puvanasvaran and Safady, Hammam M. H. and Tay, Choo Chuan and Yoong, Sai Sieng (2019) Performance Measure Of Industrial Robotics In Lean Enterprise: A Case Study In Semiconductor Industry. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 12-16. ISSN 2277-3878

Abd Rahim, Toibah and Misran, Fatimah and Shaaban, Azizah and Mustafa, Zaleha (2019) Effect Of pH Condition During Hydrothermal Synthesis On The Properties Of Hydroxyapatite From Eggshell Waste. Journal Of Mechanical Engineering And Sciences (JMES), 13 (2). pp. 4958-4969. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Abdul Manap, Muhamad Naim Fahmi and Tamin, Nor Fauzi and Azhar, Anis Afuza and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Shamsudin, Noorazizi and Mohamad Raffi, Nurul Fatin (2019) Surface Integrity Study For FC300 Cast Iron Using TiAIN Ball End Mill. Jurnal Tribologi, 21. pp. 35-46. ISSN 2289-7232

Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Al-Amani, Umar and Azhar, Anis Afuza and Mokhtar, Muhammad Faiz and Hamed, Muhammad Fitri Naim (2019) Effect Of Sintering Temperature On Density, Hardness And Tool Wear For Alumina-Zirconia Cutting Tool. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4648-4660. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Azhar, Anis Afuza and Mokhtar, Muhammad Faiz and Hamed, Muhammad Fitri Naim and Azlan, Umar Al-Amani (2019) Fabrication And Machining Performance Of Ceramic Cutting Tool Based On The Al2O3-ZrO2-Cr2O3 Compositions. Journal of Materials Research and Technology, 8 (6). pp. 5114-5123. ISSN 2238-7854

Ahsan, Qumrul and Mustafa, Zaleha and Ting, Carron Shuang Sia (2019) On The Use Of Nano Fibrillated Kenaf Cellulose Fiber As Reinforcement In Polylactic Acid Biocomposites. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4970-4988. ISSN 2289-4659

Ani, Mohammad Firdaus and Fukumi, Minoru and Kamat, Seri Rahayu and Minhat, Mohamad and Husain, Kalthom (2019) Development Of Driving Fatigue Strain Index Using Fuzzy Logic To Analyze Risk Levels Of Driving Activity. IEEJ Transactions on Electrical and Electronic Engineering, 14 (12). pp. 1764-1771. ISSN 1931-4973

Asih, Hayati Mukti and Chong, Kuan Eng and Lee, Mei Ph’ng (2019) Simulation Of Mixed-Load Testing Process In An Electronic Manufacturing Company. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 408-416. ISSN 1693-6930

Halim, Isa and Radin Umar, Radin Zaid and Syed Mohamed, Muhammad Syafiq and Ahmad, Nadiah and Padmanathan, Vinothini and Saptari, Adi (2019) The Influence Of Hand Tool Design On Hand Grip Strength: A Review. International Journal of Integrated Engineering, 11 (6). 053-069. ISSN 2229-838X

Jingsi, Wang and Liew, Pay Jun and Jiaqi, Zhu (2019) Material removal in ultrasonic abrasive polishing of additive manufactured components. Applied Sciences, 9 (24). pp. 1-13. ISSN 2076-3417

Kasim, Mohd Shahir and Abdul Aziz, Mohd Sanusi and Mohd Shahrim, Mohammad Shah All-Hafiz and Wong, Pui Kei and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdul Ghani, Jaharah and Haron, Che Hassan and Saedon, Juri (2019) Chip Morphology In Ball Nose End Milling Process Of Nickel Based Alloy Material Under MQL Condition. The International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 1-7. ISSN 0268-3768

Kasim, Mohd Shahir and Harun, Nurul Hatiqah and Mohd Shahim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah (2019) Multi-response optimization of process parameter in fused deposition modelling by response surface methodology. International Journal Of Recent Technology And Engineering (IJRTE), 8 (3). pp. 327-338. ISSN 2277-3878

Kasim, Mohd Shahir and Mohd Nasir, Faarih Farhan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Wong, Pui Kei and Yusof, Ahmad Anas and Mohamad, W Noor Fatihah (2019) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 33-43. ISSN 2289-7879

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Ghani Abdul, Jaharah and Che Haron, Che Hassan and Raja Abdullah, Raja Izamshah and Sundi @ Suandi, Syahrul Azwan and Mohamed, Saiful Bahri and Othman, Intan Sharhida (2019) Investigation Of Surface Topology In Ball Nose End Milling Process Of Inconel 718. Wear, 426-42. pp. 1318-1326. ISSN 0043-1648

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdullah, Abu and Jaafar, Mohd Fairuz (2019) An Assessment For A New Approach To Pulsating Lubrication Strategy (PLS) In End Milling. The International Journal of Advanced Manufacturing Technology, 105. pp. 3157-3163. ISSN 0268-3768

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Mohd Zainurin, Nurul Shafiqah and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah and Mat Harttar, Maziati Akmal and Mohamed, S.B. and Nawi, M.A.M. (2019) The Effects Of Dry And Chilled Air On Tool Wear Behavior During Face Milling Of Inconel 718. Jurnal Tribologi, 21. pp. 47-62. ISSN 2289-7232

Laily, Suraya and Hussein, Nur Izan Syahriah and Salleh, Mohd Shukor and Mohamad Nizam, Ayof (2019) Statistical analysis of second repair welding on dissimilar material using Taguchi method. Journal of Mechanical Engineering and Sciences, 13 (2). pp. 5021-5030. ISSN 2289-4659

Maidin, Shajahan and John Wong, Huang Ung and Akmal, Suriati and Romlee, Wan Fatin Athirah and Mohamed, Ahmad Syafiq (2019) Vacuum System Assisted Fdm – Characteristic Of Heat Transfer Using Finite Element Analysis. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 1-6. ISSN 2277-3878

Maslan, Mohd Nazmin and Sato, Kaiji and Shinshi, Tadahiko (2019) Position Measurement And Control Of A Thin And Compact Linear Switched Reluctance Motor With A Disposable-Film Mover. SENSORS AND ACTUATORS A: PHYSICAL, 285. pp. 80-88. ISSN 0924-4247

Mat Rashid, Rasyimawati and Radin Umar, Radin Zaid and Ahmad, Nadiah (2019) Research Trends On Control Of Industrial Major Accident Hazard Occurrence In Malaysia: A Thematic Review. Journal of Legal, Ethical and Regulatory Issues, 22 (1). pp. 1-10. ISSN 1544-0036

Mizobuchi, Akira and Abdul Aziz, Mohd Sanusi and Kasim, Mohd Shahir and Mohamad, Effendi and Salleh, Mohd Rizal and Raja Abdullah, Raja Izamshah and Ishida, Tohru (2019) Helical Micro-Hole Drilling Of Chemically Strengthened Glass Using Capsule-Shaped Electroplated Diamond Tool. Journal of Advanced Manufacturing Technology, 13 (2). pp. 69-81. ISSN 1985-3157

Mohamad, Effendi and A Rahman, Muhamad Arfauz and Salleh, Mohd Rizal and Ibrahim, Mohd Amran and Sulaiman, Mohd Amri (2019) Generation Of A Decision Support System To Enhance The Efficiency Of Lean Manufacturing. Industrial Engineering & Management Systems, 18 (2). pp. 173-181. ISSN 1598-7248

Mohamad, Effendi and Jiga, Elnie Carina and Rahmat, Rashitah and Azlan, Alya and Abd Rahman, Mohd Soufhwee and Adi, Saptari (2019) Online Booking Systems For Managing Queues At The Road Transport Department. Journal of Industrial Engineering, Scientific Journal on Research and Application of Industrial System, 4 (1). pp. 21-32. ISSN 2503-3670

Mohamad, Effendi and Rahmat, Rashitah and Mohamad, Nor Akramin and Jaafar, Roshidah and Yuniawan, Dani and Ito, Teruaki (2019) Improving Electronic Document Control Approval Process Through E-Certification. Journal of Advanced Manufacturing Technology (JAMT), 13 (1). pp. 33-44. ISSN 1985-3157

Mohamad, Effendi and Salleh, Mohd Rizal and A Rahman, Muhamad Arfauz and Sulaiman, Mohd Amri and Ishak, Anuar and Teruaki, Ito (2019) Cleaner Production Value Stream Mapping At A Chromium Plating Plant: A Case Study. International Journal Of Agile Systems And Management (IJASM), 12 (3). pp. 245-260. ISSN 1741-9174

Mohamad, Noraiham and Karim, Khairu Ilwani and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi Azam and Ab Maulod, Hairul Effendy and Mazlan, Mazliah and Mahamood, Mazlin Aida (2019) Optimization of physical and mechanical properties of glycerol - modified natural rubber/starch - filled carbon black composites using two level factorial design. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4989-5005. ISSN 2289-4659

Mohamad Yatim, Norazlina and Norazman, Farhaneem and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Norhidayah (2019) Characterization Of phosphoric acid biochar derived from rubber wood sawdust for enhancement Of urea fertilizer impregnation. ARPN Journal Of Engineering And Applied Sciences, 14 (12). pp. 2185-2192. ISSN 1819-6608

Mohamad Yatim, Norazlina and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Noraiham and Yusof, Faridah (2019) Urea functionalized multiwalled carbon nanotubes as efficient nitrogen delivery system for rice. Advances In Natural Sciences: Nanoscience And Nanotechnology, 10 (1). pp. 1-11. ISSN 2043-6262

Mohamed Sultan, Al Amin and Mativenga, Paul Tarisai (2019) Sustainable Location Identification Decision Protocol (SuLIDeP) For Determining The Location Of Recycling Centres In A Circular Economy. Journal Of Cleaner Production, 223. pp. 508-521. ISSN 0959-6526

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Ahsan, Qumrul and Yahya, Muhd Zu Azhan (2019) Lithium-Ion Supercapacitor Using Vertically-Aligned Carbon Nanotubes From Direct Growth Technique, And Its Electrochemical Characteristics. Portugaliae Electrochimica Acta, 37 (3). 167 - 178. ISSN 0872-1904

Mohd Amin, Ahmad Nawawi and Kamat, Seri Rahayu and Kamalrudin, Massila and Wan Mahmood, Wan Hasrulnizzam (2019) Continuous Improvement Through Lean Using VSM For Application In Machining Based Product Company. International Journal Of Recent Technology And Engineering (IJRTE), 8 (2S11). pp. 778-784. ISSN 2277-3878

Mohd Hisham, Mohd Hizwan and Aripin, Muhamad Afzamiman and Saud, Muhammad Sukri and Ishar, Mohamad Izzuan and Mohamed Sultan, Al Amin (2019) Reliability Index Of Creative Thinking Among Electrical Engineering Lecturers. International Journal Of Advanced Science And Technology, 28 (13). pp. 247-252. ISSN 2005-4238

Nawawi, Ahmad and Kamat, Seri Rahayu and Wan Mahmood, Wan Hasrulnizzam (2019) Lean Practices For Waste Prioritising In Machining Based Product. International Journal of Mechanical and Production Engineering Research and Development, 9 (5). pp. 305-318. ISSN 2250-2378

Osman, Mohd Hairizal and Mokhtar, Muhammad Faiz and Abu Bakar, Mohd Hadzley and Hamed, Muhammad Fitri Naim and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Aziz, A. A. and Noorazizi, S. (2019) Effect Of Hydraulic Pressure On Hardness, Density, Tool Wear And Surface Roughness In The Fabrication Of Alumina Based Cutting Tool. Journal of Advanced Manufacturing Technology, 13 (1). pp. 23-37. ISSN 2289-8107

Othman, Muhammad Azri and Minhat, Mohamad and Jamaludin, Zamberi (2019) A Framework Of Next Generation Adaptive CNC Controller. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (11S2). pp. 288-293. ISSN 2278-3075

Pay, Jun Liew and Jingsi, Wang (2019) Repair Of Ultrasonic Machining Induced Surface/Subsurface Cracks By Laser Irradiation. Optics & Laser Technology, 111. pp. 497-508. ISSN 0030-3992

Radin Umar, Radin Zaid and Ahmad, Nadiah and Halim, Isa and Lee, Poh Yan and Hamid, Malek (2019) Design And Development Of An Ergonomic Trolley-Lifter For Sheet Metal Handling Task: A Preliminary Study. Safety and Health at Work, 10 (3). 327 - 335. ISSN 2093-7911

Raja Abdullah, Raja Izamshah and Ramli, Azlan and Kasim, Mohd Shahir and Mohd Zakaria, Muhammad Akmal and Ding, Song Lin (2019) Rotary ultrasonic assisted machining of mould and die material. Journal of Advanced Manufacturing Technology (JAMT), 13 (2(1)). pp. 1-14. ISSN 1985-3157

Raja Abdullah, Raja Izamshah and Zakaria, Akmal and Mohd Shahir, Kasim and Ibrahim, Mohamad Halim (2019) Enhancing the Productivity of Wire Electrical Discharge Machining Toward Sustainable Production by using Artificial Neural Network Modelling. EMITTER International Journal of Engineering Technology, 7 (1). pp. 261-274. ISSN 2443-1168

Salleh, Mohd Shukor and Abd Rahman, Ammar and Othman, Intan Sharhida and Subramonian, Sivarao and Yahaya, Saifudin Hafiz and Siswanto, Nurhadi (2019) Investigation Of Wear And Corrosion Characteristics Of Short Heat Treated Thixoformed Aluminium Alloy. Journal of Advanced Manufacturing Technology, 13 (3). pp. 101-113. ISSN 1985-3157

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771

Shukur, Azurin and Hussein, Nur Izan Syahriah and Kamat, Seri Rahayu and Yuniawan, Dani (2019) The Impact Of Worker Experience And Health Level To Vibration Absorbed By Hand. Journal of Advanced Manufacturing Technology, 13 (1). pp. 91-103. ISSN 1985-3157

Subramonian, Sivarao and Jayahkundy, Raguvaran and Ali, Aidy and Abdullah, Mohamad Faizal and Dhar Malingam, Sivakumar and Md Ali, Mohd Amran and Arep @ Ariff, Hambali and Salleh, Mohd Shukor and Vates, Umesh Kumar (2019) Investigation of tyre pressure drop phenomenon using specially designed real-time data mining and storage system. International Journal of Recent Technology and Engineering, 7 (5S4). pp. 533-537. ISSN 2277-3878

Syed Mohamed, Muhammad Syafiq and Azani, Akmal Hafiz and Abdullah, Lokman and Zamri, Ruzaidi and Maslan, Mohd Nazmin and Mat Ali, Mahasan and Zainon, Maslan and Mohd Samsuddin, Noorazizi (2019) Tool And Task Design Challenges For Left Handers: A Brief Review. Human Factors And Ergonomics Journal (HFEJ), 4 (1). pp. 46-51. ISSN 2590-3750

Tianfeng, Zhou and Liew, Pay Jun and Fubin, Ma and Benshuai, Ruan and Xibin, Wang and Jia, Zhou (2019) Microlens array fabrication on WC mold using EDM milling with in situ electrode trimming. The International Journal Of Advanced Manufacturing Technology, 103 (5-8). pp. 3003-3011. ISSN 0268-3768

W. Mohamad, W Noor Fatihah and Kasim, Mohd Shahir and Mohd Zakaria, Muhammad Akmal and Mohd Shahrim, Mohammad Shah All Hafiz and Mohamed, Saiful Bahri (2019) The Effects Of Indentation Loading Force And Number Of Indentations On The Micro Hardness Variation For Inconel 718. International Journal of Recent Technology and Engineering, 8 (3). pp. 980-983. ISSN 2277-3878

Yaakob, Mohd Yuhazri and Salahudin, Mohamad Tahkim and Sihombing, Haeryip and Wan Yaacob, Wan Nur Hidayah and Amir Mohamed, Kamarul and Sulaiman, Shamsudin (2019) The Profiling of Design Product Using Bezier Curve for Customers Product Design Preferences. International Journal Of Advanced Trends In Computer Science And Engineering, 8 (1.3). pp. 214-218. ISSN 2278-3091

Yahaya, Saifudin Hafiz and Yaakub, Siti Farizah and Salleh, Mohd Shukor and Abd Rashid, Mohd Warikh and Abdullah, Abu and Purnomo, Muhammad Ridwan Andi (2019) Mathematical Modelling Of The Passive And Semi-Active Automobile Suspension Systems In Ford Scorpio Car Model. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 83-96. ISSN 1985-3157