Browse By Repository:

 
 
 
   

Items where Year is 2008

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 1411.

Aw, Aaron Teik Hong (2008) Design & Development Micromouse For Robot Competition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizah, Acob (2008) Seremban International Golf Club Management System (SIGC Management System). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Bernardette , Louisa Francis Ting (2008) Design And Development Of Accumulator For Domestic Water System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzlida Hanim, Abdul Razak (2008) Implementation Of Children Courseware In Concept Of Recycling Technique With Multimedia Elements. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Faridah Azura , Yahaya (2008) Mobile Prayer Times For PDA Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Jamsari , Che Long (2008) The Development Of 3D Animation Story Title Guli Using Lip-Sync Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuan, Paw Paw (2008) Car Park Control System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Adam, Sepee (2008) Robot Automatik Menggunakan Motor Penginjak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Isminhazwan , Ismail (2008) DC To DC Converter Using CMOS. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Jamli, Mohd Ali (2008) Analysis Of Sawmill Workers Through Integration Of Video Observation And RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Emafazreen, Mohd Yatim (2008) Design A Bipedal Walker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Normaliza , Ab Razali (2008) Arabic Courseware Using Constructivism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Hajar , Abd Rahman (2008) A Study On Hardness Of Porcelain Body Sintered At Various Temperatures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A. P., Puvanasvaran and M.R, Muhamad (2008) A Review of Problem Solving Capabilities in Lean Process Management. American Journal of Applied Science, 5 (5). pp. 504-511. ISSN 1546-9239

A.Nasoruddin, Mohamad (2008) BENC 3173: Sistem & Rangkaian Komputer. [Teaching Resource]

A.Nasoruddin, Mohamad (2008) DENC 3363: Kejuruteraan Komputer. [Teaching Resource]

Ab Ghani , Rina Mariana (2008) CFD Simulation Of A Direct Injection Natural Gas Injector Nozzle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Rahman, Mahmood (2008) BMFP 3572: Tingkahlaku Organisasi (Organizational Behaviour). [Teaching Resource]

Abd Ghaffri, Abd Halim (2008) Permodelan Dan Analisis Pelanggaran Kereta. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Ghani, M. K. and Bali, R. K. and Naguib, R. N.G and Marshall, I. M. and Wickramasinghe , N. S. (2008) Electronic health records approaches and challenges: a comparison between Malaysia and four East Asian countries. International Journal of Electronic Healthcare, 4 (1). 78 -104. ISSN 2008.018922

Abd Ghani, M. K. and Bali, R. K. and Naguib, R. N.G and Marshall, I. M. and Baskaran, V and Wickramasinghe , N. S. and John , P (2008) A Flexible Telemedicine Framework for the Continuous Upkeep of Patient Lifetime Health Records (F2U-LHR). In: Americas Conference on Information Systems (AMCIS), August 2008, Toronto, Canada.

Abd Halim, Wahidah and Ab. Aziz, Nur Hakimah and Azri, Maaspaliza (2008) BEKM 2433: Mesin Elektrik. [Teaching Resource]

Abd Majid, Darsono (2008) BENT 2143: Analisis Rangkaian. [Teaching Resource]

Abd Majid , Darsano and Prof Madya Abdul Rani, Othman and Redzuan, Abdul Manap (2008) Design Fabricate And Measurement Of Linear Power Amplifier For Communication Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rafar, Mohd Din Arshad (2008) Design Validation And Development Of A 6 Axis Robot Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Shukur, Ja'afar (2008) DENE 1122: Pengukuran. [Teaching Resource]

Abdollah, M. F. and Sahib, S. and Yaacub, A. H. and Othman, M. F. I. and Yusof, R. (2008) Feature Selection for Detecting Fast Attack in Network Intrusion Detection. Journal of Advanced Manufacturing Technology, 2 (2). pp. 39-56. ISSN 1985-3157 July-December 2008

Abdul Azim, Abdul Rahim (2008) WCDMA Simulation For Transmitter Part And BER Performance In AWGN, Rayleigh Channel And Rician. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Fattah , Mohd Tahir (2008) Effect Of Air Arrangement On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Haffiz, Zakaria (2008) SPM Candidate Registration Online System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Haji, Mohd Faiz (2008) Design And Development Of Shimless Pump Footing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Dahalan (2008) DENT 1213: Prinsip ELektrik. [Teaching Resource]

Abdul Hamid, Hamidon (2008) BENE 2153: Elektronik Analog. [Teaching Resource]

Abdul Hamid, Hartini (2008) Design Of 240V Square Wave Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid, Izaidin and Dora, Mohd Taib and Ismail , Kamariah (2008) Examining Stevenson’s Conceptualisation of Entrepreneurship as Opportunity-Based Firm Behaviour. In: at Asia Pacific Conference on Management and Technology Entrepreneurship (APCMOTTE 08), 29-30 Octobe 2008, Asia Pacific.

Abdul Majid, Izaidin and Dora, Mohd Taib and Hussin, Huzili and Ismail, Kamariah (2008) THE IMPACT OF THE LEVEL OF ENTREPRENEURIAL INCLINATION ON THE LEVEL OF FIRM PERFORMANCE. In: of Innovation and Entrepreneurship 2008, 2008, Tsinghua University China.

Abdul Majid, Izaidin and Dora, Mohd Taib and Ismail, Kamariah (2008) Business Venture Creation: Exploring on Some Common Barriers. In: The Sixth International Conference on New Directions in the Humanities , 15-18 July 2008, Instanbul.

Abdul Majid, Izaidin and Dora, Mohd Taib and Ismail, Kamariah (2008) Comparing Between Low and High Entrepreneurial Tendencies across Various Characteristics of the Firms. In: Regional Conference on HRD 2008 (RESERD 2008), 14-16 Jan 2008, Kuala Terengganu.

Abdul Majid, Izaidin and Dora, Mohd Taib and Md. Saad, Mohd. Shamsuri (2008) Prevalence of Entrepreneurial Management practices in Technology-based Firms. In: International Conference on Business & Mangement, , 8-9 Jan 2008, Brunei.

Abdul Majid, Izaidin and Hussin, Huzili and Mohd Sharif, Sabri and Md. Saad, Mohd Shamsuri (2008) EXPLORING ENTREPRENEURSHIP EDUCATION AND TRAINING. In: Seminar Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS), 18-19 Ogos 2008, Melaka.

Abdul Majid, Izaidin and Ismail, Kamariah and Cooper, Sarah and Mason, Colin and Wan omar, Wan Zaidi (2008) The Actors Involved and the Decision-Making Process Used In the Exploitation of University Patents. International Journal of Businee Management. pp. 1-28. ISSN Volume 3, Number 2,

Abdul Majid, Izaidin and Ismail, Kamariah and Wan Omar, Wan Zaidi (2008) The Commercialisation Process of Intellectual Properties by the UK Universities. In: Regional Conference on HRD 2008 (RESERD 2008, 14-16 Jan 2008, Kuala Terengganu.

Abdul Majid, Izaidin and Ismail , Kamariah and Mason, Collin and Cooper, Sarah and Wan Omar, Wan Zaidi (2008) The Decision Making Process for the Exploitation of University Patents Through Licensing to Established Companies and Spin-off Formations. In: 2008 IIBD & LEWI International Conference on Innovation and Entrepreneurship, 12-13 Nov 2008, Hong Kong.

Abdul Majid, Izaidin and Ismail , Kamariah and Wan Omar, Wan Zaidi (2008) University Spin-off Formations: How decision making process has been made? In: Asia Pacific Conference on Management and Technology Entrepreneurship (APCMOTTE 08), 29-30 Oct 2008, Melaka.

Abdul Majid, Izaidin and Kamarudin, Mohd Fauzi and Samroz, Mohd Zawaei (2008) Occupational Stress and Teachers’ Job Satisfaction: Implication to the Human Relations Management Approach. In: Regional Conference on HRD 2008 (RESERD 2008, 14-16 Jan 2008, Kuala Terengganu.

Abdul Majid, Izaidin and Kamarudin, Mohd Fauzi and Sidek, Muliati (2008) TAHAP PENGUASAAN BAHASA INGGERIS DI KALANGAN STAF AKADEMIK DI SEBUAH UNIVERSITI TEKNIKAL. In: Seminar Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) , 18-19 Ogos 2008, Melaka.

Abdul Majid, Izaidin and Md. Saad, Mohd. Shamsuri and Tim, Mazzarol (2008) HOW DO LEADERSHIP AND STRATEGY INFLUENCE INNOVATION? - MULTIPLE CASE STUDIES OF INNOVATIVE FIRMS IN WESTERN AUSTRALIA. In: The International Conference on The Roles of the Humanities and Social Sciences in Engineering, 5-6 Dec 2008, Kuala Lumpur.

Abdul Majid , Ali (2008) Autonomous Maintenance Programme For Milling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Majid , Izaidin and Wan Omar, Wan Zaidi and Ismail, Kamariah (2008) DO THE CHARECTERISTICS OF TECHNOLOGY LEAD TO UNIVERSITY PATENTS BEING UNEXPLOITED? In: Regional Conference on HRD 2008 (RESERD 2008), 14-16 Jan 2008, Kuala Terengganu.

Abdul Mutalib , Abdul Hamed (2008) Modeling And Experimental Identification Of Magnetic Clutch. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Rahman , Abdul Malek (2008) Design And Development Of Sofa Bed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman (2008) BENT 3153: Elektronik Telekomunikasi. [Teaching Resource]

Abdul Rani, Othman and Noor Asyikin, Sulaiman (2008) BENE 1123: Prinsip Asas Elektronik. [Teaching Resource]

Abdul Samad, Shibghatullah (2008) BITS 2513: Teknologi Internet. [Teaching Resource]

Abdul Samad, Shibghatullah (2008) A Multi-Agent System For A Bus Crew Rescheduling System. PhD thesis, Brunel University.

Abdul Syukor, Mohamad Jaya (2008) DITG 1112: Kemahiran Komputer. [Teaching Resource]

Abdul-Aziz, Azlianor and Sulong, Muhammad Suhaizan and Kamalrudin, Massila and Abdullah, Muhammad Haziq Lim (2008) A Mobile Web Application Architecture For Generating Destination Oriented LRT Route. In: WSEAS International Conference on Applied Computing Conference (ACC), 27-30 May 2008, Istanbul, Turkey.

Abdullah, Muhammad Haziq Lim and Abdul-Aziz, Azlianor and Sulong, Muhammad Suhaizan and Kamalrudin, Massila (2008) Architecture of Mobile Web Application for Generating Dynamic Route Map. International Journal of Computers, 2 (2). pp. 107-111. ISSN 1998-4308

Abdullah, Muhammad Haziq Lim and Mustafa, Nuridawati and Mohammed, Norazlin and Zainon, Nur Filzah (2008) Context-Based Information Retrieval of Athletic Sport Management System (ASMS). In: Proceedings of The 1st Makassar International Conference on Electrical Engineering and Informatics, 13 - 14 November 2008, Hasanuddin University, Makassar, Indonesia.

Abdullah, Norida and Mat, Zawiah (2008) Bab 2 - Pemikiran kritis dan kreatif dalam buku Kemahiran Insaniah. 7 kompetensi unggul mahasiswa. In: Kemahiran Insaniah. 7 Kompetensi Unggul mahasiswa. Penerbit Universiti, UTeM, Utem, Melaka, pp. 51-73. ISBN 978-983-2948-31-5

Abdullah, Rohana and Mohamad, Effendi and Muhamad, Mohd Razali (2008) Managing Key Performance Indicators (KPIs): A Case Study at an Aerospace Manufacturing Facility. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Abdullah, Rohana and Saptari, Adi and Mohamad, Nor Akramin and Isa, Halim and Mohamad, Effendi (2008) Simulation Modeling for Balancing and Optimizing a Digital Measuring Device (DMD) Production Line. In: Malaysian Technical Universities Conference 2008, 15-16 March 2008, Putra Palace, Kangar, Perlis.

Abdullah Firdaos, Mohd Lidin (2008) Natural Gas Vehicle (NGV) Engine Performance Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah Helmee, Suki (2008) Inexpensive PLC Input Port Expansion Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abidin, Roziah (2008) Investigation Of Inter Material Shear Properties Of Iron And Stannum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Musa Asha'ari, Mohd Sarif (2008) Uncertainty Measuring and Evaluating the Measurement of Gauge Block by Universal Measuring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Maleck , Hamid (2008) Part Combination Of Design For Assembly (DFA) Using Flow Analysis (EFA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi , Saptari and Isa , Halim and Seri Rahayu , Kamat and Nor Akramin, Mohamad (2008) Productivity Analysis at a Small and Medium Enterprises (SMEs)Focusing on Work Study, Line Balance and Ergonomics. In: International Conference on Mechanical and Manufacturing Engineering 2008, 21-23 May 2008, Johor Bahru, Johor.

Adi Asharie, Sani (2008) Router Monitoring via SMS System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adie, Mohd Khafe (2008) BEKG 2323: Prinsip Kawalan. [Teaching Resource]

Adie, Mohd Khafe (2008) DENE 3153: Prinsip Kawalan. [Teaching Resource]

Adnan, Mohammad Noor Khairul Azrin (2008) Design And Development Of Cctv Using Webcam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Affendi , Hussin (2008) Design, Analysis And Fabricate Of Pressure Vessel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahamed Fayeez , Tuani Ibrahim (2008) Development Of Bluetooth GPS Receiver. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad, Mohd Riduan (2008) PROPAGATION MEASUREMENT FOR INDOOR WLAN SYSTEM. In: Special Topics in Propagation and Communication Engineering. Penerbit UTM. ISBN 978-983-52-0663-4

Ahmad, Mohd Riduan and Dutkiewicz, Eryk and Huang, Xiaojing (2008) Performance analysis of MAC protocol for cooperative MIMO transmissions in WSN. In: Personal, Indoor and Mobile Radio Communications, 2008. PIMRC 2008. IEEE 19th International Symposium on, 15-18 September 2008, Cannes, France.

Ahmad, Mohd Riduan and Dutkiewicz, Eryk and Huang, Xiaojing (2008) Performance evaluation of MAC protocols for cooperative MIMO transmissions in sensor networks. In: ACM symposium on Performance evaluation of wireless ad hoc, sensor, and ubiquitous networks , 27-28 Oct 2008, Vancouver, Canada.

Ahmad, Mohd Riduan and Dutkiewicz, Eryk and Huang, Xiaojing (2008) MAC protocol for cooperative MIMO transmissions in asynchronous wireless sensor networks. In: 2008 International Symposium on Communications and Information Technologies, ISCIT 2008, 21-23 October 2008, Vientiane, Laos.

Ahmad, N. (2008) Classification of Protein Sequences using the Growing Self-Organizing Map. In: 4th International Conference on Information and Automation for Sustainability, 2008. ICIAFS 2008. .

Ahmad , Rivai (2008) BMCS 4343: Analisis Struktur & Fem. [Teaching Resource]

Ahmad , Rivai (2008) BMCS 2333: Mekanik Pepejal II. [Teaching Resource]

Ahmad Anas, Yusof and Zairulazha, Zainal and Mohd Khairi, Mohamed Nor and Nor Salim, Mohammad and Mohd Firdaus , Rameli and Khairul Nizam, Khalid (2008) Energy-Saving Compact Hydraulic Power Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Anwar , Hamdan (2008) Study Performance Of Cylindrical Grinding On Surface Roughness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Asyraf, Shari (2008) Non-Intrusive Liquid Level Detection System Using Ultrasound Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar , Omar (2008) Control Of Bus Suspension System Comparison Between Lead Lag Compensator And State Feedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azlan Shahibuddin , Abdul Manaf (2008) Feasibility Study On Design Of Grass Removing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azmir , Ahmad Tarmizi (2008) Kajian Tentang Mereka Bentuk Brek Letak Kereta Elektrik Untuk Kereta Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Azmil (2008) Finite Element Modeling, Analysis And Simulation Of Wide Rim Alloy Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Ahmad Jamil (2008) Joining Performance Of Aluminium T6063 Using GTAW Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal , Yaacob (2008) Vehicle Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid , Mohammad (2008) Evaluation Of Environmental Factors On Production Site In Precision Industry Using Ergonomic Assessment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fariz, Faizal Lim (2008) The Study Of Optimum Condition To Produce Rubber Induced Polymer (Polyethylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fhadli , Salleh (2008) Effects of Tool Length In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Ab Halim (2008) Analysis And Flexural Strength Of Mullite-Bonded Silicon Carbide Fabricated Using Various Uniaxial Mechanical Pressure And Milling Duration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri , Md Zain (2008) Summon Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fuad, Ab Ghani (2008) DMCM 2713: Dinamik. [Teaching Resource]

Ahmad Hamidon , Ali (2008) UTeM LAN Voice Chat. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Hatta, Abdullah (2008) Design And Development Of Fuzzy Logic Based Level Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Idil , Abdul Rahman (2008) BEKM 3553: Pemprosesan Isyarat Digit. [Teaching Resource]

Ahmad Ismail, Man (2008) DC Motor Speed And Position Control Using Analog PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim (2008) Pelaksanaan Cip DSC Boleh Atur Cara Untuk Pemprosesan Isyarat Kelajuan Tinggi : UKM8051DSC. Masters thesis, Universiti Kebangsaan Malaysia.

Ahmad Jamal, Salim (2008) BENC 4113: Organisasi Dan Senibina Komputer. [Teaching Resource]

Ahmad Jawahir, Tugimin and Mohd Taib, Dora and Rosli, Saadan and Nor Maslian , Abd Halip (2008) Kesan Komunikasi Dalam Organisasi Ke Atas Kepuasan Kerja Staf Sokongan Di Universiti Teknikal Malaysia Melaka (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamely, Mohamad (2008) BMFS 3373: Teknologi CNC (CNC Technology). [Teaching Resource]

Ahmad Khairul Radhi, Kamaruzaman (2008) PID And State-Feedback Controller Design By Using Matlab. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Muslim , Othman (2008) Failure Analysis On TIG Weldment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nidzamuddin , Najib (2008) Development Of Safety System For XY-Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhwan , Abdullah (2008) Design And Development Of Antilock Braking System For Motorcycle 110 Cc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridzuan , Ab. Wahab (2008) Microwave Filter-Stepped Impedance Lowpass Filter At 2.4GHz. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Sufi, Abdullah (2008) Brikueting Panas Habuk Kayu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Suzairy, Sukor (2008) Velocity Measurement Of Flowing Particle Using Combination Of Laser And Optical Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim and Abdul Rahim, Samsudin and Mohd Syafik, Jumali and Cheong, Teik Keon (2008) Development Of Zlatanov-Gosselin Robotic System. Project Report. UTeM, Melaka Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2008) BMFA 3473: Instrumentasi & Penderia (Sensor & Instrumentation). [Teaching Resource]

Ahmad Yusoff, Hassan (2008) Majlis Anugerah Sukan 2008. [NC Speech] (Submitted)

Ahmad Zahirudin , Mohamad Ramdzan (2008) Proses Pengoptimuman Parameter FDM Bagi Material ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Abd Razak (2008) Preliminary Investigation Of Automobile Hydraulic Transmission System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zaki , Shukor (2008) BEKM 3453: Teknologi Mikropengawal. [Teaching Resource]

Ahmad Zaki , Shukor and Muhammad Herman , Jamaluddin and Md Hairul Nizam , Talib and Aminurrashid , Noordin (2008) An Automated Building Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zharif, Azizan (2008) Control Of Wheeled Mobile Robots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zharif Rabbani, Rozali (2008) Flow Investigation Around Sphere In Open Circuit Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zubir , Jamil (2008) BEKC 4773: Robotik Dan Automasi. [Teaching Resource]

Ahmad Zulfadli , Ahmad Nazari (2008) Voice Interactive Game Using Speech Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aida Fazliana, Abdul Kadir (2008) BEKP 3853: Kecekapan Tenaga. [Teaching Resource]

Aidil Azlan, Ahmad Zamri (2008) Laminar Natural Convection In Enclosure Containing Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Fariha, Othman (2008) Vibration Analysis For Diagnostic Of local Faults In Rolling Element Bearing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aini Fathillah , Hassan (2008) Learning Management System For Mobile Device (LMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat, Mohamed Ali (2008) Measurement And Evaluation Of The Reverberation Time For Classrooms In UTEM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Azmi (2008) Mereka Bentuk Sistem Nozel Automatik Untuk Mesin Pemadam Api Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal Hakim , Musah (2008) DC Motor Speed Controller Using PIC16F876A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Khan , Abdul Gani (2008) 3D Animation Story "Cintailah Sungai Kita". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alfian, Haris (2008) Alat Penjimat Kuasa Elektrik (Power Saver). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Mohd Aswarizal (2008) Kon Keselamatan Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias , Khamis and Mohamad Saleh, Saleha and Ali @ Ibrahim, Fariz (2008) BEKU 1223: Litar Elektrik 1. [Teaching Resource]

Alif Zulfakar , Pokaad (2008) Kecekapan Haba Ekzos Dan Penggunaan Bahan Api Tentu Brek (BSFC) Enjin Diesel Dengan Bahan Api Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Amir, Basari and Mohd Shakir , Md Saat and Khisbullah , Hudha and Zulkarnain, Zainuddin and Adie, Mohd Khafe (2008) Control Of Quarter Car Nonlinear Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameen , Mahadi (2008) Developmet Of Human Interface (HMI) For Flexible Manufacturing System (FMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aminuddin, Abdul Wahab (2008) Development Of Controller For Back Cover Assembly Station For Flexible Manufacturing System Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Suffian, Norshahri (2008) Radio Frequency Controlled Stairs Climbing Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirah Nabihah , Jahidin (2008) Misuse Detection System Using Artificial Neural Network. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amiruddin, Husin (2008) A Study On Effectiveness Netwook Monitoring System Software In Local Area Network Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul , Sait (2008) Potential Application Of Ferrofluid For Robot Gripping Mechanism. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amizan, Kasim (2008) DSS For House Selection In Malacca. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ammar, Abd Rahman (2008) BMFG 4813: Sistem Pembuatan (Manufacturing System). [Teaching Resource]

Amrul , Omar (2008) Suspension Geometry Analysis Of Formula Varsity Race Car. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Anas, Azmi (2008) Rekabentuk Mixer Untuk Kenderaan Berkuasa Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anas Takiyudin , Mohd Anuar (2008) The Development Of Emergency Life Raft With Integrated Water Distiller System (ELRIDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anna Marie , Almodiel (2008) Study On Fracture In Low Carbon Steel Using Bend Specimen With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Mohd Sabri (2008) Lecturer Room Director/Message Board. Project Report. UTeM, Melaka Malaysia. (Submitted)

Anuar , Ngadengon (2008) Design And Development Wireless Camera Controller Using PIC 16F84A. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar Haszuad, Abdul Halim (2008) PC Based Device Switching Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arief Ezmee , Jumodi (2008) Infrared Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Arumugam, Sativelo (2008) Automated QA Inspections Using Vision Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asleeda , Ahmad (2008) Six Sigma (DMAIC) Implementation In Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Asri, Din (2008) Proportional-Integral (PI) Speed Controller For 6/4 Switched Reluctance Motor. Masters thesis, Universiti Malaya.

Asri , Din (2008) BEKE 1233: Peranti Elektronik Dan Sistem. [Teaching Resource]

Asri , Din (2008) DEKE 2333: Elektronik Berdigit. [Teaching Resource]

Aun, Khor Yong (2008) Analysis Of Data Exchange In CAD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Man, Karimah (2008) Car Park Gate Control System Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Salleh (2008) DENE 2333: Elektronik. [Teaching Resource]

Azahari, Salleh (2008) DEKG 2243: Teknologi Elektrik. [Teaching Resource]

Azdiana, Md Yusop (2008) DENE 3152: Instrumentasi. [Teaching Resource]

Azhar , Ahmad and Md Hairul Nizam, Talib (2008) BEKE 1213: Peranti Elektronik. [Teaching Resource]

Aziah, Khamis (2008) The impact of embedded generation on harmonic performance. Masters thesis, Newcastle University .

Azim Fauza , Md Khair (2008) Develop A Motor Speed System Using An Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizah, Shaaban (2008) Fabrication and evaluation of magnetic ceramics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizah, Shaaban (2008) BMFB 3213: Teknologi Plastik (Plastik Technology). [Teaching Resource]

Azizul , Ahmad (2008) Integrated Filling And Capping System In Bottling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizul Hilmi , Ahmad (2008) Topology Optimization In Automotive Bumper Beam Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlan, Mohamad (2008) Analisis Pengangkat Galah (Pole Lifter Analysis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli Imran , Alias (2008) Robot Mudah Alih Kawalan Motor Servo RC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlilawati , Ishak (2008) Vehicle Protection System From Water Flooding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azlina, Abdul Latip (2008) WLAN Low Noise Amplifier Using HBT Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlina , Othman (2008) Real Time Dynamics Signature Verification. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azlinda, Mohd Nor (2008) Flame Imaging Using Ultrasonic Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman , Amiruddin (2008) Control Of Ball And Beam: Comparison Between Lead/Lag Compensator And State Feedback Controller (SFC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azra Suzzana , Wahab (2008) Stock And Inventory Control System Using Radio Frequency Identification (RFID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrin , Maharani (2008) Design And Model Making Of Hemming Jig For Car Door Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azuan , Abdul Aziz (2008) Optoelectronic PH Meter With Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azzad Firdaus, Zolkepli (2008) Electronic Combination Lock Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azzawaani , Zainal Abidin (2008) Intrusion Alert Via GSM. Project Report. UTeM, Melaka,Malaysia. (Submitted)

B

Badrul Hisham, Ahmad (2008) Substrate Integrated Waveguide Bandstop Filters. PhD thesis, University of Leeds.

Bagas, Wardono and Sivarao, Subramonian (2008) Quality And Performance Analysis Of Laser Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bagas, Wardono (2008) BMFS 3313: Simulasi Dalam Sistem Pengeluaran (Simulation In Production System). [Teaching Resource]

Bahaman, Nazrulazhar and Hamid , Erman (2008) Computer Application: Practical Approach. Venton. ISBN 987-983-3526-56-6

Bahaman, Nazrulazhar and Hamid , Erman and Mat Ariff, Nor Azman (2008) Data Communications and Networking: Practical Approach. Venton. ISBN 978-983-3526-89-5

Bahaman, Nazrulazhar and Hamid , Erman and Othman, Mohd Fairuz Iskandar and Hassan, Elia Erwani (2008) Penggunaan Alat Bantu Simulasi Dalam Pembelajaran Rangkaian Kawasan Setempat Maya (VLAN). In: Prosiding Seminar Kebangsaan Aplikasi Sains Dan Matematik, 24th to 25th November 2008, Batu Pahat, Johor.

Bahaman, Nazrulazhar and Hamid , Erman and Shibghatullah, Abdul Samad and Mas'ud, M. Z. and Abd Malek, Akhdiat (2008) Next Generation Internet Protocol — Test6-I Deployment. In: Information Technology Seminar 2008, 16 Oct 2008, Kolej Yayasan Melaka.

Bahaman, Nazrulazhar and Malek, Akhdiat Abd and Hamid , Erman and Mohd Fairuz Iskandar , Othman (2008) Kajian Penggunaan Alat Bantu dalam Pembelajaran Rangkaian Internet Protokol Versi 6 (IPv6). In: National Student Development Conference (NASDEC), 22 to 23 Oktober 2008, Johor Baharu.

Ban , Shu Wen (2008) Smart Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bani Hashim, Ahmad Yusairi (2008) Experimenting With The Problem-Based Learning. In: DECON 2008 - National Conference of Design and Concurrent Engineering Universiti Teknikal Malaysia Melaka , 28-29 Oktober 2008, Universiti Teknikal Malaysia Melaka. (Submitted)

Basiron, H. (2008) Corrective Feedback in Dialogue-based Computer Assisted Language Learning. In: NZCSRSC2008, Christchurch, New Zealand.

Basiron, H. and Knott, A. and Robins, A. (2008) Corrective Feedback in Language Learning. In: IMICON08.

Bong , Siaw Wee (2008) Vibration-Free Positioning Of A Gantry Crane System With Inverse Dynamic Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chai, Jiuan Hua (2008) Design And Development Of Plastic Injection Mould With Concurrent Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chairulsyah, Abdul Wasli and Abdul Rani, Othman (2008) 58 GHz power amplifier, a development amplifier using microstrip technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Seng Kiong (2008) Line Detecting Mobile Robot For Delivering And Receiving Loads To Different Set Points. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Alan Kah Poh (2008) The Study Of The Effects Of Surface Roughness Of Loggerhead Sea Turtle Shell In Relation To Drag Coefficient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, How Wan (2008) Design And Development Of Embedded Controller For Control Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Bee Ngo (2008) Turtletron Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Chow Khuen (2008) Design And Development Of A Control System Based On Engine Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan , Kok Thai (2008) PC Based For Power Failure Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Siang Yee (2008) The Compatibilizing Effect of Coupling Agent on the Morphological Properties of Banana Fibre as Reinforcement for Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang , Hin Fuat (2008) A Study Of Corrosion Behaviour Of Aircraft Components Material : Anodized Aluminium 2024-T3. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chang , Weng Soon (2008) Corrosion Behaviour Of Steel For Simulated Concete In Choride Aqueous Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Ali, Mohd Hafiez (2008) Rekabentuk Sistem Pemanas Air Suria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Amran, Aliza and Sahazati , Md Rozali and Saifulza , Alwi@ Suhaimi (2008) BEKC 2333: Pengantar Sistem Kawalan. [Teaching Resource]

Che Arsad, Zurainey (2008) License Plate Recognition System Using Video And Images. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Engku Roziana , Che Engku Harun (2008) Pembaharuan Pada Sistem Kunci Kereta (Proton Wira). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Norazma Adawiyah , Che Ku Aziz (2008) Design And Experimental Study Of Keris Mould Using Doe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Nuraini, Che Ku Mohd (2008) Mobile Maths Courseware: Problem Solving Guide For Primary Schools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Nurul Hidayah, Che Wan Zakaria (2008) Pic Tape Measure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, S.Y. and Mat Yamin, Ahmad Kamal (2008) EFFECT OF SURFACE ROUGHNESS ON DRAG OF LOGGERHEAD CARAPACE. Jurnal Mekanikal. pp. 37-48. ISSN 2289-3873

Cheng, S.Y. and Mat Yamin, Ahmad Kamal (2008) The assessment of the effect of surface roughness on drag coefficient and aerodynamics features of loggerhead sea turtle carapace. In: 2nd Regional Conference on Vehicle Engineering and Technology 2008, 15-17 July 2008, Kuala Lumpur.

Cheng, See Yuan and Shamsul Bahari, Azraai and Tee, Boon Tuan (2008) Developing Flow System Of Fluid Inside Nata De Coco Leaching Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng , Yuan We (2008) Tensile Properties And Morphology Studies Of Polymeric Biocomposite. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Cheong , Teik Keon (2008) The 4-Dof Parallel Robot Fabrication And Design Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew , Heng Boon (2008) Determination Of 3-Dimensioanl Robot Workspace And Safe Working Area Using Computer Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chia , Keh Mok (2008) MP3 FM Modulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kat Meng (2008) Design Validation And Development Of Plastic Injection Mould Cavity For Plastic Container Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin , Soon Hwa (2008) An Evaluation On Capacity Of Casting Industry By Using Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kuan Eng and . Oma, Mohamed K and Abu Bakar, Nooh (2008) Solving Assembly Line Balancing Problem using Genetic Algorithm with Heuristics- Treated Initial Population. In: World Congress on Engineering 2008, 2-4 July 2008, Imperial College, London.

Chong, Shin Horng (2008) Practical Control of Non-Friction Mechanism for Precision Positioning. In: International Conference of Control, Automation & Systems, October 2008, COEX SEOUL KOREA.

Chong, Shin Horng (2008) A Practical Controller Design for High Precision Motion System with Non-Friction Mechanism. In: International Conference of Positioning Technology Conference (ICPT), November 2008, HAMMAMATSU JAPAN .

Choo, Yun Huoy (2008) DITM 2113: Sistem Multimedia. [Teaching Resource]

Choo, Yun Huoy (2008) Teknik Rough-Apriori Untuk Perlombongan Petua Sekutuan Linguistik. PhD thesis, Universiti Kebangsaan Malaysia.

Choo, Yun Huoy and Abu Bakar, Azuraliza and Hamdan, A. R. (2008) A Rough-Apriori Technique in Mining Linguistic Association Rules. In: ADVANCED DATA MINING AND APPLICATIONS. Lecture Notes in Computer Science, 5139/2 . Springer Berlin Heidelberg.

D

Dayang Masyrinirta , Suahilai (2008) Drug Rehabilitation Center Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

E

Ee , Leng Hong (2008) PIC PWM Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi, Mohamad and Adi, Saptari and Rohana, Abdullah (2008) Productivity Improvement: A Case Study At A Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Effendi, Mohamad (2008) BMFP 4553: Pengurusan Sumber Manusia (Human Resource Management). [Teaching Resource]

Ekhwan Syafieeq , Khalid (2008) Gametrailer Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ella Erwani , Hassan (2008) BEKP 4773: Analisis Sistem Kuasa. [Teaching Resource]

Elmi Jasrie , Ehsan (2008) The Analysis Of 3 Phase Squirrel-Cage Induction Machine Using Simulink. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Emaliana, Kasmuri (2008) BITP 2233: Kejuruteraan Keperluan Perisian. [Teaching Resource]

Emelia Ernie , Kamaruzzaman (2008) Merekabentuk Sistem Pengering Pakaian Automatik Menggunakan Kaedah Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Emmil , Razmie Leong (2008) A Three Phase PWM Controller With DC Power Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Erman, Hamid (2008) DITS 1113: Pengenalan Kepada Teknologi Maklumat. [Teaching Resource]

Erman, Hamid (2008) DITS 3612: Asas Rangkaian Cisco. [Teaching Resource]

Ernie, Mat Tokit (2008) Design Optimization Of A Fixed Bed Biomass Gasifier Of A Two Stage Incinerator. Masters thesis, Universiti Putra Malaysia.

Esmie Khalik Mohamad, Ismail (2008) Vibration - Free Positioning Of Flexible Systems Using Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Estar, Mohd Shahrizan (2008) Automated Electrical Distribution Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezatun Aidah, Mohd Yusoff (2008) Agent-Based System For Clinical Supplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ezra Roosevelt, Nadrarasan (2008) E-Bookstore For Malaysian Grolier (E-Book MG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadhilah, Sapian (2008) Improving The Classification Of Banana Maturity Level With Hybrid Committee Of Ann. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fadhlina , Abdullah (2008) A Design Of An Air Ionizer Using The Cockroft-Walton Multipliers. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fadlilhisham, Ahmad (2008) Home Appliances System Development For CoHAVI Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairol Hishsyam , Mohd Nor (2008) Blocking Website Demostration And Explaination Model Control By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairul Azhar, Abdul Shukor (2008) Design Of A Line Ocsillatory Actuator For Oil Palm Mechanical Cutter. Masters thesis, Universiti Putra Malaysia.

Fairul Azhar , Nasri (2008) Automatic Cable Stripper. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fairulazri, Mohammad Koshim (2008) Pole Lifter Mechanism (Mekanisma Pengangkat Galah). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuzradzi , Md Yusop (2008) Membangunkan Dan Menganalisa Sistem Hidraulik Air Bertekanan Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faiz Redza , Ramli (2008) BMCI 4543: Rekabentuk & Inovasi I. [Teaching Resource]

Faizal , Hamzah (2008) Generation Of HV Impulse And Testing On Insulator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Faizasuriya , Osman (2008) Nutrition Balancing System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Faizil , Wasbari (2008) BMCF 2223: Mekanik Bendalir I. [Teaching Resource]

Faizul Akmar , Abdul Kadir (2008) BMCV 2613: Mekanik Kenderaan Bermotor. [Teaching Resource]

Faizul Azdi, Amat Puadi (2008) Laci Simpanan Barang Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nadia, Azman (2008) DITM 3612: Alat Pengarangan Adobe Dreamweaver. [Teaching Resource]

Farah Nadirah, Alias (2008) Pengawal Letak Kereta Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nazmi, Kamarudin (2008) Brush Teeth With Music For Treatment Of Autism Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Shahnaz, Feroz (2008) DACS 3212: Statistik. [Teaching Resource]

Farah Umaima, Miswan (2008) Drilling Of Aero Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abd Razak (2008) Control Of 2 Dimensional Inverted Pendulum Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design And Fabrication Of Bollard Light Using Modern Product Development Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhani, Mohamad (2008) Design and fabrication of bollard light using modern product development process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin (2008) BEKG 1413: Teknologi Elektrik. [Teaching Resource]

Farid Arafat, Azidin (2008) BEKG 3113: Kawalan Industri. [Teaching Resource]

Faridah , Abd Wahab (2008) Courseware : Pendidikan Kesihatan Dan Penjagaan Diri Kanak-Kanak. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fariz Izwan , Mustapha (2008) Online File Sharing Via SMS (OFS Via SMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fariz Izwan , Mustappa (2008) Online File Sharing Via SMS (OFS Via SMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatein Amina, Abd Malik (2008) Integrated Lens Antenna (ILA) For Automotive Application At Frequency 77GHZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah , Razak (2008) Wireless Camera Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatimah Al-Zahrah , Mohd Sa'at (2008) BMCF 3233: Mekanik Bendalir II. [Teaching Resource]

Fauzi, Abdul Wahab (2008) BENT 4173: Sistem Pensuisan Telekomunikasi. [Teaching Resource]

Fauziyah, Salehuddin (2008) BENM 4123: Rekabentuk Litar Bersepadu. [Teaching Resource]

Fauziyah, Salehuddin (2008) DENC 3453: Mikropemproses. [Teaching Resource]

Fazlli , Patkar (2008) BEKE 2443: Elektronik Kuasa. [Teaching Resource]

Firdaus Fadzilah, Husani (2008) Design And Fabrication Of Street Light Using Modern Product Development Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firkhan Akhmadeen , Maarof (2008) Kinematic Study Of A Macpherson Susupension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foong, Yoo Kim (2008) The Oblique Impact On Crash Barrier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foong , Weng Kang (2008) Application Of Inventory Model In Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Frische , Kuleh Engan (2008) Network Interfacing And GUI Development Of Speech Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fung Yap, Tian (2008) Handheld Environment Meter. Project Report. UTeM, Melaka. (Submitted)

G

Gabriel , Nisau (2008) The Study On Harmonic Distortion Effects On Transformer Connections. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Galoh Kesuma Ningrat , Zakaria (2008) W-CDMA Simulation For Receiver Part And Ber Performance In Awgn, Rayleigh Channel And Rician. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Go, Sook Huey (2008) The Mechanical Properties And Morphology Study Of The Silica-Reinforced Polyethylene (PE) Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Ong Sing and Fung, C.C. (2008) Acquiring trustworthy knowledge for conversation agents based on a Web knowledge trust model. In: International MultiConference of Engineers and Computer Scientists (IMECS 2008), 19-21 March, Hong Kong.

Goh, Ong Sing and Fung, C.C. (2008) The design of interactive conversation agents. WSEAS Transactions on Information Science and Applications, 5 (6). pp. 901-912. ISSN 1790-0832

Goh, Ong Sing (2008) A framework and evaluation of conversation agents. PhD thesis, Murdoch University.

Goh, Ong Sing and Fung, C.C. (2008) AINI - embodied conversation agent applicable for interactive games. In: WSEAS International Conference on Applied Computer and Applied Computational Science (ACACOS '08), 6-8 April 2008, Hangzhou, China.

Goh, Ong Sing and Fung, C.C. (2008) Trust based knowledge acquisition for conversation agents. IAENG International Journal of Computer Science, 33 (2). pp. 1-9. ISSN 1819-9224

Goh, Ong Sing and Fung, C.C. and Depickere, A. (2008) Domain knowledge query conversation bots in instant messaging (IM). Knowledge-Based Systems, 21 (7). pp. 681-691. ISSN 0950-7051

Goh, Ong Sing and Fung, C.C. and Depickere, A. and Wong, K.W. (2008) An analysis of man-machine interaction in instant messenger. In: Advances in Communication Systems and Electrical Engineering. Springer US, New York, pp. 197-210.

Goh, Ong Sing and Fung, C.C. and Wong, K.W. (2008) VisualChat: a visualization tool for human-machine interaction. In: IEEE/WIC/ACM International Conference on Web Intelligence and Intelligent Agent Technology, 2008. WI-IAT '08, 9-12 Dec. 2008, Sydney, NSW.

Goh , Wern Chie (2008) The Study Of Flow Visualization On LNT Catalytic Converter Using CFD-Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gwee , Chiou Chin (2008) Design And Modeling Of Multiple Tank Control For Fluid Circulation System Using Fuzzy Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Habibullah, Akbar and Anton Satria, Prabuwono (2008) Automated visual inspection (AVI) research for quality control in metal stamping manufacturing. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), 17 - 19 November 2008, UNITEN, Malaysia. (Submitted)

Hafiz Amini, Jamaluddin (2008) Design And Simulation Of Digital Audio Broadcasting Transmitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah , Hamzah (2008) Data Library In Manufacturing (Cutting Tool) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafiziana , Othman (2008) Autonomous Maintenance Programme For Drilling Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hafzan , Ariffin and Norida, Abdullah and Ismail , Ibrahim (2008) Isu Psikomatrik Alat Ujian IQ Bagi Model Pembangunan Sumber Manusia Untuk Pemilihan Personel Dalam Bidang Kejuruteraan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairil Amri, Jaafar (2008) Speech Operated System For Home Appliances. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hairol Farisah, Jaafar (2008) Engine RPM Based Sensing Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hambali, Arep @ Ariff (2008) Development Of Design Concept Selection Using Analytical Hierarchy Process (AHP) For Automotive Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Zulmajid (2008) Modeling And Design Embedded Controller For A Condenser System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamid , Erman and Bahaman, Nazrulazhar and Shibghatullah, Abdul Samad and Abdul Malek, Akhdiat (2008) A Survey of IPv6 Deployment. In: Information Technology Seminar, 16 Oct 2008, Kolej Yayasan Melaka.

Hamidon Paizal , Ahmad Puad (2008) Design A Compensator For DC-DC Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamira, Mat Noh (2008) E-Rumahku Sales System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Sakidin (2008) DACS 2222: Persamaan Pembezaan. [Teaching Resource]

Hamzah, Sakidin (2008) Modeling And Modification Of Global Positioning System Tropospheric Delay Mapping Function. PhD thesis, Universiti Putra Malaysia.

Hanafi, Ainain Nur and Alias, Azrita and Wan Abd. Razak, Intan Azmira (2008) BEKG 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Hanim, Abdul Razak (2008) BENG 2223: Teknologi Mikropemproses. [Teaching Resource]

Hanipah, Hussin (2008) Memperkasa kemahiran insaniah dalam pendidikan berbasis Islam di Aceh Negoro. Project Report. Acheh Negoro / PPD 2011.

Hanisah , Md Taha (2008) Online Restaurant Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Haniza, Nahar (2008) DITS 3722: Perlaksanaan Dan Pentadbiran Direktori Aktif. [Teaching Resource]

Haniza , Ismail (2008) Sms Controller. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Haron, Khairul Anwar (2008) Lead Time Improvement By Re - Layout At Aerospace Company (Ctrm Aero Composite Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hartini , Othman (2008) Personal Data Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haryati, Mat Yasim (2008) Patient Smart System (PATISYS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Hazmilah (2008) EXPLORING ENGINEERING EMPLOYABILITY COMPETENCY. Journal of Human Capital Development. pp. 11-20. ISSN 1985-7012

Hasan, Hazmilah and Dunn, Ian and Jones, Ray (2008) Engineers Employability Competency: Employer Perspective. Journal of Human Capital Development. pp. 245-256. ISSN 1985-7012

Hasbullah, Ashari (2008) The Alignment Of Competitive Priorities, Process Structure, And Information Technology And Its Effect On Firm Performance : A Study Of Malaysian Manufacturing Firms. PhD thesis, Universiti Teknikal Malaysia Melaka.

Hasil Adha, Haslan (2008) Evaluation Performance Of Louvered-Fin Compact Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haslinda, Ismail (2008) BITP 2213: Kejuruteraan Perisian. [Teaching Resource]

Haslinda , Ab Halim (2008) Child Right Brain Development Through Game Based Learning. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasmazana, Hashim (2008) The Messaging System With File Attachment Function For Usage Of UTeM (LAN). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasmel , Nazray (2008) Design And Development Chassis For The Fire Fighting Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasnita , Halim (2008) Training Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hasoloan Haery, Ian Pieter (2008) BMFP 3582: Ekonomi Pembuatan (Manufacturing Economy). [Teaching Resource]

Hasoloan Haery, Ian Pieter (2008) DMFD 3513: Pengurusan Pembuatan (Manufacturing Management). [Teaching Resource]

Hassan, Rahman (2008) Generation Of High Voltage Impulse And Test On Insulator (Plywood). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, H. and Jomhari, N. and Hisham, S. (2008) Accessibility Research in Malaysia. Technical Report. Association for Computing Machinery.

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2008) Fully Coupled Thermal-Mechanical Analysis of Automotive Disc Brake Squeal. In: Inaugural Automotive Researchers' Conference,, 8-9 January 2008, University of Huddersfield, United Kingdom.

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2008) Thermo-Mechanical Contact Analysis of Car Disc Brake Squeal. SAE International Journal Passenger Cars – Mechanical System, 1 (1). pp. 1230-1239. ISSN 1946-3995

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2008) Thermo-Mechanical Contact Analysis of Car Disc Brake Squeal. In: 26th Annual Brake Colloquium & Exhibition SAE International, 12 October 2008, St Antonio, Texas USA.

Hassyura , Harun (2008) Mobile Malaysian History Notes Using Mental Story - Malayan Union Kepada Pembentukan Persekutuan Tanah Melayu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazimin , Hamdan (2008) Kuala Lumpur Rail Network Integration : Interactive Web Based System Using Treemap Information Visualization Representation (Klrail Mobile System). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hazman, Md Yusop@Yusof (2008) Design And Development Of Motorized Cold Air Intake System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazmilah, Hasan (2008) Exploring Engineering Employability Competencies Through Interpersonal And Enterprise Skills. PhD thesis, Coventry University.

Hazrullizam , Idris (2008) Development Of Tracking System Using RFID. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hazura, Haroon (2008) DENE 1323: Prinsip Elektronik. [Teaching Resource]

Hazura, Haroon and Sharatul Izah, Samsudin and Zaiton, Abdul Mutalip (2008) BENT 1133: Litar Elektrik 1. [Teaching Resource]

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2008) THE COMPARISON OF LPG AND NATURAL GAS ADSORPTION CAPACITY IN CARBON ADSORBENT. In: REACH'07, 18 - 20 January 2008, Kuala Lumpur.

Herdy , Rusnandi (2008) BMCB 2423: Sains Bahan. [Teaching Resource]

Herman , Edmeades (2008) Fabricating A Car's Radiator. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hew, Wai Onn (2008) Microprocessor Based 3-Phase Six-Step Vsi FED AC Motor Drive Based On Rabbit Microprocessor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hidayat , Zainuddin and Mohd Hendra , Hairi (2008) BEKP 4673: Perlindungan Sistem Kuasa. [Teaching Resource]

Hidayatullah , Musa (2008) Study The Process Of Total Preventive Maintenance (TPM) Of Injection Moulding Machine Arbug 420C. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ho, Tze Yuan (2008) A New Procedure For High Frequency Electronic Ballast Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho , Fu Yeap (2008) Robot Worm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hoh, Simon and Devaraju , Anusuriya and Wong, Chin Chin (2008) A Context Aware Framework for User Centered Services. In: 21st International Symposium Human Factors in Telecommunication, Malaysia.

Humesan , Shanmugam (2008) Automatic Radio Frequency Controlled Object Chaser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hurun Ain , Ab. Rahman (2008) Application Of Linear Programming In Industrial System: Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husaini, Abdullah (2008) A Precision Assembly In Plastic Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussin , Burairah and Shibghatullah, Abdul Samad (2008) Principal Component Analysis in Used Oil Data for Condition Based Maintenance. In: In Proc Seminar on Data Mining & Optimization (DMO 08), 3-4 December 2008, UKM, Bangi, Malaysia..

I

Ian Divine , Hillary Bajau (2008) Small Scale Intelligent Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ibrahim, Ahmad (2008) BITM 1123: Pengarangan Media Interaktif. [Teaching Resource]

Ibrahim, Zulkifilie (2008) BEKE 3753: Peranti & Penerus Elektronik Kuasa. [Teaching Resource]

Ibrahim , Mohd Zulfadli (2008) Design And Implementation Of Smart Home Automation And Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idawati , Hatib (2008) Design And Development Of PC Based Software For Time & Frequency Domain. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Idham, Ahmad (2008) Active Suspension System With State Feedback Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Fakrulradzi and Syed Ariffin, Sharifah Hafizah (2008) Handoff Latency of Voice over Internet Protocol in Mobile IPv6. In: 2008 IEEE INTERNATIONAL RF AND MICROWAVE CONFERENCE PROCEEDINGS, 2-4 december 2008, Kuala Lumpur, Malaysia.

Ikram Hakimi , Mohd Zaki (2008) Tender Management System For JKR Besut System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ilyana , Abdullah (2008) Autonomous Maintenance Programme On Grinding Machine For Job Base. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Imamura, H. and Imahashi, T. and Zaimi, M. and Sakata, Y. (2008) Preparation and characteristics of various rare earth nitrides. Journal of Alloys and Compounds, 451. pp. 636-639. ISSN 0925-8388

Imran, Mohd Ibrahim and Mohamad Zainol Abidin, Abd Aziz and Abd Shukur, Jaafar (2008) On The Design Fabrication And Measurement of Broadband Slot Array Antenna For A Broadband communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Sutan Chairul (2008) Variable Speed Control Of 3 Phase Induction Motor (DL 1021) Using Inverter (ABB 550-01-08A8-4). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim (2008) DENT 3563: Kejuruteraan Telekomunikasi. [Teaching Resource]

Intan Azmira , Wan Abdul Razak (2008) Short Term Load Forecasting Using Data Mining Technique. Masters thesis, Universiti Teknologi Malaysia.

Intan Azmira , binti Wan Abdul Razak and Md. Shah , bin Majid and Hasimah , Abd. Rahman and Mohammad Yusri , Hassan (2008) Short Term Load Forecasting Using Data Mining Technique. In: 2nd IEEE International Conference on Power and Energy (PECon 08), December 1-3, 2008, Johor Bharu.

Intan Ermahani, A. Jalil (2008) DITP 1113: Pengaturcaraan I. [Teaching Resource]

Intan Sharhida, Othman (2008) BMFB 2213: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Isa, Halim and Rohana, Abdullah (2008) Assessment of Thermal Comfort at Classroom Environment: Subjective Measurement vs. Direct Technical Measurement. In: International Conference on Environment (ICENV 2008)., 15 - 17 December 2008, Penang, Malaysia..

Isa, Halim (2008) BMFP 4593: Ergonomik Industri (Industrial Ergonomics). [Teaching Resource]

Isa , Halim and Adi , Saptari and Muhammad Hafidz Fazli , Md Fauadi and Radin Zaid, Radin Umar and Tajul Ariffin, Abdullah (2008) Application Of Ergonomics Analysis And Quality Function Deployment (QFD) To Design A Materials Handling Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Mohd Amer Afiq (2008) Kawalan Motor Tetingkap Kuasa Untuk Kegunaan Menggenggam Dan Mengangkat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Mohd Ikhwan (2008) Noisee Exposure Level Monitoring In A Furniture Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismadi , Bugis and Mohd Fairus , Abdollah and Mazree , Ibrahim and Noorfadzli , Abdul Razak (2008) BEKC 2443: Mikropemproses. [Teaching Resource]

Ismadi , Bugis (2008) BEKE 4773: Penukar Elektronik Kuasa. [Teaching Resource]

Ismail, Abu Shah (2008) BMFR 3143: Rekabentuk Alat Pengeluaran (Production Tool Design). [Teaching Resource]

Ismail, Hassan (2008) Majlis Perutusan Naib Canselor UTeM 2008. [NC Speech] (Submitted)

Ismail , Kamariah and Abdul Majid, Izaidin and Mason, Colin and Cooper, Sarah and Wan Omar, Wan Zaidi (2008) The Decision Making Process for the Exploitation of University Patents Through Licensing to Established Companies and Spin-off Formations. In: 2008 IIBD & LEWI International Conference on Innovation and Entrepreneurship, 12-13 November 2008, Hong Kong.

Ismail , Kamariah and Abdul Majid, Izaidin and Wan Omar, Wan Zaidi (2008) Patents Exploited through Spin-off Formation and Licensing to Established Companies: One University's Decision Making Process. In: Sixth International Conference on New Directions in the Humanities,, 15-18 July 2008, Fatih University, Istanbul, Turkey.

Ismail , Kamariah and Abdul Majid, Izaidin and Wan Omar, Wan Zaidi (2008) University Spin-off Formations: How decision making process has been made? In: Asia Pacific Conference on Management and Technology Entrepreneurship (APCMOTTE 08, 29-30 October 2008, Melaka.

Ismaniza, Ismail (2008) Study On The Performance Of Carbon Adsorbent In LPG Tank Small Engine Fuelled By LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismayati , Ismail (2008) Second Hand Book System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Izahanis , Mansor (2008) Online Flood Information System (OFIS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Izaidin, Abdul Majid and Mohd Taib, Dora and Mohd Fauzi, Kamarudin and Safiah , Sidek (2008) Barriers To Business Venture Formation Amongst Individuals In The City Of Kuala Lumpur And Selected Districts In Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izan Shukrizal, Shukor (2008) Penyediaan Serbuk Hidroksiapatit Melalui Teknik Sol Gel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izuwati, Abd Razak (2008) Development Of Flood Early Warning System At Taman Merdeka, Batu Berendam, Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzaidi Fairus, Ismail (2008) Design Of Chemical Mixer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

ismail, A. and gillin, M. and Yencken, J. and Abdul Majid, Izaidin (2008) “Entrepreneurial Orientation of Malaysian Bumiputera; Preliminary findings for small and medium manufacturing enterprises (SMMEs). In: AGSE ERE 2008 Conference, 5-8 February 2008, Melbourne.

J

Jafri, Jamaludin (2008) Effects Of Fiber Size Modification On The Mechanical Properties Of Kenaf Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal, Tukiman (2008) The Adoption And Implementation Of Best Practice In Biotech Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamarizan , Mohd Isa (2008) Design And Development Of Locking Device For Proton Waja Glove Box. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jannatunnaim , Harun (2008) Design And Modeling Of Multiple Tank Control For Fluid Circulation System Using PI,PD & PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jano, Zanariah (2008) Using weblogs in ESP classroom. Journal of Human Capital Development, 1 (1). ISSN 1985-7012

Jauharatud Yani , Ahmad (2008) Patient Information System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Johal, M. S. and Othman,, A. R. and Suaidi, M. K. and Mohd. Dom, H. (2008) Design Simulation of Multiple Differential Transceiver at 2.0 GHz for Third Generation Mobile Communication System. In: 2008 Joint 6th National Conference on Telecommunication Technologies (NCTT) and 2nd Malaysia Conference on Photonics, 26-27 August 2008, Putrajaya.

Johari, Norhasnira (2008) Noise Measurement And Prediction In Residential Areas Near Batu Berendam Airport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juan Rizal, Sa'ari (2008) Influence Factors Of Electronic Commerce (EC) Adoption And Innovation On Development Of Small And Medium Enterprises (Smes) In Melaka. Masters thesis, UTeM.

Jufarina, Jolkipli (2008) Sudoku Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jufarina , Jolkipli (2008) Sudoku Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juhaini, Jabar and Claudine, Soosay (2008) Strategic technology alliance in manufacturing firms: a conceptual paper. In: Proceedings of the 6th Australian and New Zealand Academy Management: Operations Supply Chain and Services Management Symposium , 8 June - 10 June, Gold Coast, Australia.

Junainah , Leman (2008) Digital Instrument Display For Cars. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Junenika , Maharjuai (2008) Foreign Worker Agency Information System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jurifa , Mat Lazi and Aman, Aminudin (2008) BEKP 3653: Sistem Kuasa Dan Voltan Tinggi. [Teaching Resource]

Juwita, Mohd Sultan (2008) BENT 3173: Komunikasi Dan Rangkaian. [Teaching Resource]

K

Kaliyamah , Raman (2008) Smart Student Attendance System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kamal Baharin, S. S. (2008) Managing Moving Objects Data and Context Data for Emergency Management System. Journal of Advanced Manufacturing Technology. ISSN 1985-3157

Kamal Baharin, S. S. (2008) Optimal Navigation for First Responders. In: Information systems for crisis response and management, Joint ISCRAM-CHINA, Gi4DM Conference, 4 - 6 August 2008, Harbin, China.

Kamaleshvaran , Balakrishnan (2008) Design Of Biped Robot Model Controller. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kamaliah Hanim , Samhudi Kamil (2008) FPGA Based Surveillance System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kamalrudin, M. and Soong, Hoong Cheng and Abdul-Aziz, Azlianor and Sulong, Muhammad Suhaizan (2008) Reinforcing the Concept of Calculating Isotope Pattern Using Theoretical Isotope Generator (TIG). WSEAS Transactions on Information Science and Applications, 5 (6). pp. 949-958. ISSN 1790-0832

Kamalrudin, Massila and Soong, Hoong Cheng and Abdul-Aziz, Azlianor and Sulong, Muhammad Suhaizan (2008) Software Learning Tool to Calculate Isotope Pattern for Chemistry Area of Study. In: WSEAS International Conference on Applied Computing Conference (ACC), 27-30 May 2008, Istanbul, Turkey.

Kamalrudin, massila and Mohan, Sharmini and Liew , Pay Jun and Abdullah, Rosmiza (2008) The mold cost estimation calculator for plastic injection mold manufacturing. In: ITSim 2008, 26-28 Aug. 2008 , Kuala Lumpur,Malaysia.

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati (2008) Simulink Implementation of Digital Cascade Control DC Motor Model - A didactic approach. 2nd IEEE International Conference on Power and Energy (PECon 08). pp. 1043-1048. ISSN 1-4244-2405-4/08

Kamarul Ariffin, Ruslani (2008) Merekabentuk Sistem Suspensi, Brek dan Sistem Roda Untuk Formula SAE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Zakaria (2008) DMCS 3333: Mekanik Pepejal II. [Teaching Resource]

Kamarul Ariffin, Zakaria (2008) DMCS 2323: Mekanik Pepejal I. [Teaching Resource]

Kamarul Arifin, Khushairi (2008) Rhino Robot Following Light Controlled By PC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, Mohd Shahir and Salleh, Mohd Rizal and Abd Rahman, Ammar and Abd Rahim, Nurul Hidayah (2008) An Investigation of the Impact of Cylindrical Grinding Parameters on Surface Roughness. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.

Kasim, Mohd Shahir and Salleh, Mohd Rizal and Sivarao, Subramonian (2008) Experimental Investigation of Significance Parameters in Surface Grinding – Quality Evaluation. In: National Conference on Design & Concurrent Engineering, 28-29 October 2008, Melaka.

Kasturi, Kanchymalay (2008) BITP 3113: Pengaturcaraan Berorientasikan Objek. [Teaching Resource]

Kazalmalik, Kamaruddin (2008) Network Traffic Analyzer In LAN (NTAL). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Soon Han (2008) Influence Of Processing Methods And Fiber Size On Rheological Properties Of Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khadijah Wan, Mohd Ghazali (2008) BITS 3323: Pengurusan Projek Rangkaian. [Teaching Resource]

Khairil Aizatt , Mohammed (2008) Smart Energy Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairill Anuar, Sakan (2008) Reka Bentuk Struktur Rekreasi (Kajian Struktur Raket Tenis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin, Osman (2008) DENE 3353: ELektronik Gunaan. [Teaching Resource]

Khairuddin , Mahalil (2008) Design And Development Of Seating Or Escalator For Double Storey House. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Amri , Saleh (2008) Merekabentuk Pengawal Logik Fuzzy-Pi Bagi Sistem Tangki Berkembar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar , Mohd Nor (2008) Quality Improvement Using Classical Method Concept In Injection Molding Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ashriq, Ashruddin (2008) Control Of An Inverted Pendulum : Comparison Between Bode Plot Techniques And Root Locus Technique When applied To Lead / Lag Compensator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azam, Buhari (2008) Productivity Improvement Through Line Balancing Method In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azri, Mohamed Yusof (2008) Temperature Control Using Analogue Pid Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Hadi, Misri (2008) Laminar Flow In Rectangular Water-Cooled Minichannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Idzham, Hasni (2008) Study On Fracture Toughness In Low Carbon Steel Using Compact Specimens With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Izzat , Mohamad Sahimi (2008) Design Switch Mode Power Supply By Using Boost Converter Topology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Muid , Khalid (2008) Beamforming Network Design By Using Blass Matrix. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nisa , Hasnor (2008) Learn The Way To Pass Your License Courseware. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Niza, Yahya (2008) Market Orientation Of Value Chains Based On Two Case Studies From Livestock Industry In Malaysia. Masters thesis, UTeM.

Khairul Nizam, Khalid (2008) Unit Kuasa Hidraulik Padat Boleh Ubah Kelajuan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Anuar , Suleiman (2008) Develop And Monitor Chatting System For PKKT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nasuha, Ambar (2008) Study In The Effect Of Compatibilizer On The Properties Of Oil Palm Shell Powder Filled Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunnisa , Khadari (2008) Kinematic Analysis Of 6-Axis Comau Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid, Khanfar and Abed, Elzamly and Walid , Al-Ahmad and Eyas, El-Qawasmeh (2008) Managing Software Project Risks With The Chi-Square (X2)Technique. International Management Review, Vol.4 (2). pp. 18-29. ISSN 1551-6849

Khalil Fashar , Zainudin (2008) Mereka Bentuk Mekanisme Penyejukan Udara Yang Mengurangkan Suhu Udara Dari Unit Penyejuk Udara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Chin Foon and Syed Ahmad, Sharifah Sakinah and Othman, Zuraini (2008) Numerical Methods. Prentice Hal Pearson, Petaling Jaya.

Khoo, Mun Choon (2008) High Performance Laser Drilling on Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo, Chin Foon (2008) The total quasi-steady state assumption: its justification by singular perturbation and its application to the chemical master equation. ANZIAM Journal, 50. c429-c443.

Khoo, Samson Hock Chye (2008) Design And Analysis Of Robot Gripper For 10 Kg Payload. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khoo , Boo Hock (2008) Security System With Can Bus Integration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Teik Lim (2008) Design And Development Of Safety Pedal Lock For Manual Gear's Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kim , Ling Sheng (2008) Multi-Level Led Dot Matrix Display Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koay , Miin Huey (2008) Enhancing Malay-English Bidirectional Mobile Dictionary (Medict). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Ho Kiet (2008) Design Of PEM Fuel Cell Powered Lawn Mower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Ho Kiet (2008) Design Of Pem Fuel Cell Powered Lawn Mower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong and Harris, Nick and White, Neil (2008) Thick-film Piezoceramic Micro-generators. Measurement + Control. ISSN 0020-2940

Kok, Swee Leong and White, Neil and Harris, Nick (2008) Free-standing thick-film piezoelectric device. Electron. Lett. , 44 (4). pp. 280-282. ISSN 0013-5194

Kok, Swee Leong and White, Neil and Harris, Nick (2008) Free-standing thick-film piezoelectric multimorph cantilevers for energy harvesting. In: IEEE International Ultrasonics Symposium, 20-23 Sept. 2009, Roma, Italy.

Kok, Swee Leong and White, Neil and Harris, Nick (2008) A Novel Pieszoelectric Thick-FIlm Free-Standing Cantilever Energy Harvester. In: Eurosensors XXII, 07 - 11 Sep 2008, Dresden, Germany.

Kok, Swee Leong and White, Neil and Harris, Nick (2008) A free-standing, thick-film piezoelectric energy harvester. In: IEEE Sensors 2008, 26 - 29 October 2008, Lecce, Italy..

Kok, Swee Leong and White, Neil and Nick, Harris (2008) Free-Standing Pb(Zr, Ti)O3 Thick-Films Prepared By a One-Step Air Co-Firing Technique. In: Electroceramics XI, 1 - 3 September 2008, Manchester, UK..

Kothwal , Abdul Raheem (2008) DMCT 3133: Termodinamik II. [Teaching Resource]

Kuah, Chuen Tse (2008) Design Of Automotive Parts For 5 Axis Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuwn, Yew Ching (2008) The Impact And Flexural Study Of The Polymeric Biocomposite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kyairul Azmi , Baharin and Hyriel Anuar, Kasdirin (2008) BEKP 3553: Teori Elektromagnet. [Teaching Resource]

L

Lai, Huey Shy (2008) Ergonomic Intervention to Reduce the Risk of Musculoskeletal Disorders (MSDs) for Manual Materials Handling Tasks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Laila Norana , Hasbollah (2008) Development Of Database System For Metallic Alloy Selection Using MS Visual Basic. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Laja , Supit (2008) Prismatic Lifter Robot By Using CPLD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lam, Soon Teng (2008) Robust Gamelan Bonang Hammer Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau , Ong Yee (2008) Programming And Simulation Of An Arc Welding Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lee, Beng Choon (2008) Characterization Of Mechanical Propertise On Polystyren E/E-Glass In The Absence And Presence Of Charcoal Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jia Chang (2008) Simulation Of Cavitating Flow In Circulating Water Pumps In A Power Generation Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, She Jie (2008) Numerical Investigation On Rainfall Noise Intrusion And Prediction Of Rain Noise For Different Composite Roof Constructions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kar Lian (2008) Computer Aided Mould Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Chia Hau (2008) Conceptual Study, Design And Analysis Of Stirling Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Fabien Thean Weng (2008) Omni Directional Logistic Transportation Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Mei Ph'ng and Agus, Setyo Budi and Zolkepli, Buang and Norizan, Md Nor and Hassan, Naziri Khalid and Mohd Ridzuan, Nordin (2008) University-Community Engagement in Malaysia:Practices and Prospects. In: Enhancing the Quality of Higher Education through Research: Shaping Future Policy. The Ministry of Higher Education Malaysia, Malaysia, pp. 66-91.

Leong, Chee Meng (2008) Development Of A PI Speed Controller For DC Motor Drive Using Rabbit Microprocessor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Liaw , Chin Yee (2008) Design And Development Casting Mould For Resin Based Medals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Pay Jun (2008) BMFS 3323: Proses Pembuatan Termaju (Advanced Manufacturing Process). [Teaching Resource]

Lim, Ai Phing (2008) Development Of Customized Logistic System Using ASP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Siew Lay (2008) Six -Legs Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, A. M. HAZIQ and Abdul Aziz, AZLIANOR and Sulong, M. SUHAIZAN and Kamalrudin, massila (2008) Architecture of Mobile Web Application for Generating Dynamic Route Map. Architecture of Mobile Web Application for Generating Dynamic Route Map. pp. 107-111.

Lim, Kim Chuan and Manuel, Boissenin and Balasumdram P., Amavasai and Reza, Saatchi (2008) Development of a Desktop Freehand 3-D Surface Reconstruction System. In: CIS 2008. 7th IEEE International Conference on Cybernetic Intelligent Systems, 2008..

Lim , Seng Keat (2008) Development Of Fuzzy Logic Speed Controller For DC Motor Applications Using Rabbit Microprocessor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Siew Yuen (2008) Packet Analyzer With Multiple Artificial Neural Network Back-Propagation Training. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim , Soon Fooi (2008) Design Of Graphical User Interface (GUI) For 68000 Microprocessor Programmer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim , Terng Fui (2008) An Analysis Of Materials Management Of Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Kok Yong (2008) Payroll System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim , Wee Teck (2008) Design And Development Of An Embedded Controller For Robotic Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Yee Kai (2008) Mechanical Properties Of Mullite-Bonded Silicon Carbide Sintered At Various Heating Temperature. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lina , Lo (2008) Automated Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling , Neng Kang (2008) Measurement Of Thermal Comfort At Workplace: A Case Study In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lionel Chadik , August (2008) New Home Security And Safety System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Liyana Syazana, Abdul Wahab (2008) Prototype Of Mobile Learning Application For Physics Entitled Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Chee Hiung (2008) Mobile Surveillance Device. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Loh, Ser Lee and Salleh, Shaharuddin and Sarmin, Nor Haniza (2008) Double Simulated Annealing Model for Mapping of Graphs to Single-Row Networks. In: Advances in Fundamentals and Social Sciences. Penerbit UTM Press, pp. 51-64.

Loh, Soon Wei (2008) Abnormal Heart Beat Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Zhia Yew (2008) Front Wheel Drive, Rear Wheel Drive, And Four Wheel Drive Effect Comparison To Vehicle Directional Stability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Yau Weng (2008) Study On The Efficiency Of Services Provided By Post Office Using Simulation Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Yin Kuan (2008) The Relationship Between Grain Sizes And Hardness Of Sintered Alumina Product. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lok, Yian Yian (2008) BACS 2222: Kaedah Berangka. [Teaching Resource]

Lok , Fung Kiew (2008) Modeling And Simulation Of An Impeller In Circulating Water Pump In A Power Generation Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah and Mohd Hisham, Nordin and Muhammad Hafidz Fazli , Md Fauadi and Mohd Noor, Akmal Rosli (2008) Automated Product Inspection System Using Radio Frequency Identification (RFID) Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Seong Gook (2008) Disc Brake Performance : FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Kuan Chuen (2008) An Analysis Incoming Quality Control Of Material In Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lydia , Abd Arif (2008) Numerical Simulation On Micro Channel Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M. R., Sapiee and Abdullah, F. and Noordin, A. and Jahari, A. N. (2008) PI Controller Design Using Model Reference Adaptive Control Approaches For A Chemical Process. In: 2008 Student Conference on Research and Development (SCOReD 2008) , 26-27 Nov. 2008, UTM, Johor.

M.A., Burhanuddin and A.R., Ahmad (2008) An Improved Decision Making Grid Model for Food Processing Small and Medium Industries. Computer Science Postgraduate Research , 1 (1). pp. 1-5. ISSN 1

M.A., Burhanuddin and A.R., Ahmad and M.I., Desa and Anton, S P (2008) An Improved Decision Making Grid Model to Identify Maintenance Strategies. An Improved Decision Making Grid Model to Identify Maintenance Strategies, 1 (1). pp. 1-6. ISSN 1

M.A., Burhanuddin and A.R., Ahmad and M.I., Desa and M.Y., Zeratul (2008) Decision Support Approach to Computerize Maintenance Management System: Development and Implementation in Food Processing Industry. Malaysian Technical Universities Conference on Engineering and Technology, 1 (1). pp. 141-147. ISSN 1

M.A., Burhanuddin and Asmai, S. A. and Ismail, Nor haslinda (2008) Software Development Using Visual Basic.NET. 1, 1 (1). FTMK, UTeM.

M.A., Burhanuddin and Burhanuddin, M. A. and Burhanuddin , Mohd Aboobaider and Zuraida , Abal Abas and Asmai, S. A. (2008) Mathematics for Computer Science Calculus. In: Mathematics for Computer Science II (Calculus). NIL, 1 (NIL). FTMK, UTeM, pp. 1-193. ISBN NIL

MOHAMAD, EFFENDI and Abdullah, Rohana and Wan Mahmood, Wan Hasrulnizzam (2008) COMMUNICATION GAP ANALYSIS AT AEROSPACE MANUFACTURING COMPANY. Journal of Human Capital Development, 1 (1). pp. 21-27. ISSN ISSN: 1985-7012

Mahadi, Abu Hassan and Norliah, Kudus and Izaidin, Abdul Majid (2008) Kajian Awal Mengenai Perlaksanaan Atribut Graduan Dan Keupayaan Subjek Teras Dalam Penerapan Kemahiran Generik Di Kalangan Pelajar UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadir , Lokeman (2008) Tunnel Inspection Robot II. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahamad, Khairul Izlan (2008) The Design Of Motorcycle Rim Adjusting Jig Using Dial Gauge. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahasan, Ahmad (2008) Merekabentuk Pengawal Suai Untuk Sistem Tangki Berkembar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahasan, Mat Ali (2008) Manual Control Robot For Pick And Place Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahathir Mohamad, Lazim (2008) Video Streaming Performance Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahendran, Ramaiah (2008) Material Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmud Khalil, Lias (2008) A Study Of Optimum Condition To Produce Rubber Induced (Polypropylene). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mardiana, Bidin (2008) BENM 1143: Litar Logik. [Teaching Resource]

Mardiana, Bidin (2008) BMFA 3463: Mikropemproses. [Teaching Resource]

Marliza, Ramly (2008) BITS 1123: Organisasi Dan Senibina Komputer. [Teaching Resource]

Mas'ud, M. Z. and Hamid , Erman and Bahaman, Nazrulazhar and Shibghatullah, Abdul Samad (2008) IPv6 and IPv4 Security Issues. In: Information Technology Seminar, 16 Oct 2008, Kolej Yayasan Melaka.

Masita , Mohd Bari (2008) Parameter Study On Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masjuri , Musa & Othman (2008) BMFG 2323: Proses Pembuatan. [Teaching Resource]

Maslan, Zainon (2008) BEKC 4883: Sistem Pembuatan Termaju. [Teaching Resource]

Maslan, Zainon (2008) BEKC 3553: PLC & Kawalan Proses. [Teaching Resource]

Masrullizam, Mat Ibrahim and Syafeeza, Ahmad Radzi (2008) Intruder System Using FPGA-Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masrullizam, Mat Ibrahim (2008) BENM 2123: Teknologi Mikropemproses. [Teaching Resource]

Masrullizam, Mat Ibrahim (2008) BENM 3223: Teknologi Mikropengawal. [Teaching Resource]

Massila, Kamalrudin (2008) DITP 3213: Kejuruteraan Perisian. [Teaching Resource]

Mat, Zawiah (2008) Islam Di Malaysia Suatu Transformasi Sosial Masyarakat Melayu Era Pasca Kemerdekaan. In: Islam Pasca Kemerdekaan. Karisma Publication, Shah Alam, Selangor, pp. 1-14. ISBN 9789831953440

Mat, Zawiah and Abdullah, Norida (2008) Pemikiran Kritis dan Kreatif dalam Buku Kemahiran Insaniah, 7 Kompetensi Unggul Mahasiswa. In: Kemahiran Insaniah. 7 Kompetensi Unggul mahasiswa. Penerbit Universiti, UTeM, Melaka, pp. 51-73. ISBN 978-983-2948-31-5

Mat Nor, Mohd Firdaus (2008) FEM Analysis And Improve Design Of Frontal Bumper Of Wira. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Youb, Norsarizan (2008) Designing Helicopter Controller Using Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mayumie Azura , Mohd (2008) Mold And Die Process Planning Activities Web-Databased. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mazareena, Mokhtaram (2008) The Study And The Design Of Mass Marsh Or Grass Puller Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazran, Esro (2008) DENE 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Mazwani , Yahaya (2008) 4 BENC Attendance System Via Smart Card. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Md Asyraf , Md Anuar (2008) Occupational Safety And Health-Identification Of Potential Risks In Furniture Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Isa, Nurhazimah (2008) A Study On An Engine Cooling Unit Of Automotive Engine Test Bed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Razali , Ayob (2008) BMCT 3133: Termodinamik II. [Teaching Resource]

Md Ridzuan , Talib (2008) Design A Multi-Function Digital Thermometer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Md Rozali, Sahazati and Rahmat, Mohd Fua'ad (2008) MODELING AND CONTROLLER DESIGN FOR A COUPLEDTANK LIQUID LEVEL SYSTEM: ANALYSIS & COMPARISON. Jurnal Teknologi. pp. 113-141. ISSN 0127–9696

Md Saiful Anuar, Mohd Nasirruddin (2008) Obstacle A Voidance With 4WD Rc Robot Using Ultrasonic And Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Mohd Khairulrizal (2008) Kesan Bentuk Lingkaran Pemanas Ke Atas Tempoh Air Mendidih Dalam Cerek Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Shah, Wahidah and Bahaman, Nazrulazhar (2008) Introduction to Information Technology. Venton, Melaka. ISBN 978-983-3526-88-8

Md Yunus , Mohd Sapi (2008) Stockist Pos E-Commerce. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusop, Azdiana (2008) Dynamic-inversion-based control for vibration-free positioning of a gantry crane system. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Md Yusop, Azdiana and Noor Asyikin, Sulaiman (2008) VIBRATION CONTROL OF A GANTRY CRANE SYSTEM USING DYNAMIC FEEDBACK SWING CONTROLLER. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.

Md. Dan, Md. Palil (2008) BMFR 3123: Ergonomik Dalam Rekabentuk (Ergonomics In Design). [Teaching Resource]

Md. Haikal, Md. Kamsor (2008) Mengkaji Prestasi Enjin Kecil Menggunakan Bahan Api LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Megat Izzuddin, Megat Ab Manap (2008) Smart Automated Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Minhat, Mohamad and Xu, Xun (2008) Characteristics and Technologies of Advanced CNC Systems. In: Encyclopedia of Information Science and Technology. IGI Global, Hershey, PA 17033-1240, USA, pp. 519-526.

Minhat, Mohamad and Xu, Xun (2008) Development of an Open Soft CNC System Based on STEP-NC and Function Blocks. In: 5th International CIRP-sponsored Conference on Digital Enterprise Technology (DET), 22-24 October 2008, Nantes, France.

Mior Hasbullah , Yob (2008) Implementing Wireless Network At Universiti Teknologi Mara (UiTM) Campus Alor Gajah, Melaka Using Opnet Modeler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mior Mohd Amin, Mior Lokman (2008) Wind Tunnel Test : Whether Between Simplified And Detailed Model Shows Any Difference In Coefficience Of Drag And Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Misron, Norhisam and Abdul Shukor, Fairul Azhar and Hizam, Hashim and Nirei, Masami and Wakiwaka, Hiroyuki and Jelani, Abdul Razak (2008) Thrust optimization of linear oscillatory actuator using permeance analysis method. In: Intermag 2008, 4 – 8 May 2008, Madrid, Spain.

Misron, Norhisam and Abdul Shukor , Fairul Azhar and Raja Othman, Raja Nor Firdaus Kashfi and Hazim, Hisham and Nirei, Masami and Wakiwaka, Hiroyuki and Jelani, Abdul Razak (2008) Effect of spring constant and thrust constant to displacement characteristics of slot type moving magnet of LOA. In: Asia-Pacific Symposium on Applied Electromagnetics and Mechanics 2008, 24-25 July 2008, Bangkok,Thailand.

Misron, Norhisam and Raja Othman, Raja Nor Firdaus Kashfi and Abdul Shukor , Fairul Azhar and Mariun, Norman and Ishak, Aris and Jelani, Abdul Razak (2008) The analysis on effect of thrust constant, spring constant, electrical time constant, mechanical time constant to vibration displacement of slot-less linear oscillatory actuator. In: 2nd IEEE International Conference on Power and Energy 2008 (PECon 08), 1 – 3 December 2008, Johor Baharu, Malaysia.

Misron, Norhisam and Raja Othman, Raja Nor Firdaus Kashfi and Abdul Shukor , Fairul Azhar and Mariun, Norman and Ishak, Aris and Jelani, Abdul Razak and Wakiwaka, Hiroyuki (2008) Analysis of thrust constant, electrical and mechanical time constant for slot-less moving magnet linear oscillatory actuator. In: Asia-Pacific Symposium on Applied Electromagnetics and Mechanics 2008, 24-25 July 2008, Bangkok,Thailand.

Mochamad , Safarudin (2008) BMCC 4743: Pengukuran Dan Instrumentasi. [Teaching Resource]

Mochamad , Safarudin (2008) BMCS 3633: Analisis Struktur Kenderaan. [Teaching Resource]

Mohamad, Effendi and Muhamad, Mohd Razali and Abdullah, Rohana and Adi , Saptari (2008) A Study on the Development of Key Performance Indicators (KPIs) At an Aerospace Manufacturing Company. Journal of Advanced Manufacturing Technology (JAMT) , 2 (2). pp. 1-17. ISSN 1985-3157

Mohamad, Noraiham and Muchtar, Andanastuti and Ghazali, Mariyam Jameelah and Hj Mohd, Dahlan and Azhari, Che Husna (2008) The Effect of Filler on Epoxidised Natural Rubber-Alumina Nanoparticles Composites. European Journal of Scientific Research, 24 (4). pp. 538-547. ISSN 1450-216X/ 1450-202X

Mohamad Ahyat, Amirul Nur Rashid (2008) Design A Line Following Mobile Robot With Distance Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aidil , Abdul Jalal (2008) Design And Development Of Line Tracking Robot With Obstacle Avoidance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Arif, Zainal (2008) Preliminary Study On Brake Squeal Noise For The Development Of Faulty Parts Indicator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azhar, Abd. Kader (2008) Automation Agro System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azli, Che Azhar (2008) Merekabentuk Dan Membangunkan Sistem Gerudi Berpandukan Koordinat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faiz , Adnan (2008) Improving Productivity Of Assembly Line In A Manufacturing Company (Printed Circuit Board Assembly). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faizal Ahmad , Zainal Abidin (2008) Realibility Improvement Of Cockroft-Walton High Voltage Multiplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikree , Alias (2008) Design And Development Of Gui For A Remotely Controlled Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdhaus , Mohamad Lajis (2008) Performance Analysis Of Six Axis Industrial Robot. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Haidir, Maslan (2008) DMFD 2833: Mekanik Bendalir (Fluid Mechanics). [Teaching Resource]

Mohamad Hidhir , Mohamad Jamali (2008) Membangunkan Teknik Rawatan Air Terbuang Daripada Proses Pembasuhan Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kadim, Suaidi and Chairulsyah, Wasli (2008) BENT 4123: Optoelektronik Dan Komunikasi Optik. [Teaching Resource]

Mohamad Musa , Suntong (2008) Microcontroller- Based Mechanically Scanned Led Flash Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Nabil Fikri , Abdul Rahim (2008) Carbon Dioxide Laser Etch Drilling Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Naim , Mohamad (2008) Time And Current Grading For Protection Relay Type MK1000 & MK2000. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nizam, Ayof (2008) DACS 1263: Fizik Asas (Basic Physics). [Teaching Resource]

Mohamad Ridzuan, Jamli (2008) BMFS 2513: Manufacturing Process I (Proses Pembuatan I). [Teaching Resource]

Mohamad Sahran , Kamilan (2008) Design A Multi-Detect Surface Algorithm For Home Vacuum Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zaki, Ishak (2008) The Development Of A Mobile Arabic Educational Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin, Abd Aziz (2008) BENT 4143: Kejuruteraan Antena. [Teaching Resource]

Mohamad Zoinol Abidin, Abd Aziz (2008) BENT 4153: Frekuensi Radio & Teknik Gelombang Mikro. [Teaching Resource]

Mohamad Zoinol Abidin, Abd Aziz (2008) Design Of A Planar Meander Line Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zubaidi, Aziz (2008) Uncertainty Evaluation For The Measurement Of Gauge Block By Micrometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Azraai , Ahmad Puad (2008) Linear Motion Based Sensing Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Nazari, Munira (2008) Portable Water Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Afiq , Hashim (2008) Underwater Remote Operating Vehicle. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Faiz, Samsuddin (2008) Proses Penghasilan Acuan Dari Rekabentuk Produk Sehingga Terhasilnya Produk Dengan Penggunaan CAD/CAM (E-Manufactuing). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fakhri, Abd Ghani (2008) Design And Develop A PICO Hydro Generation System Using Permanent Magnet Aternator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fazli, Sahbuddin (2008) Design 15-Way Infra Red Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Firdhaus , Sulaiman (2008) Mobile Signal Cancellation Device. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Hafiz, Basir (2008) Investigate The Effect Of Layer Thickness On Mechanical Properties Of Parts Produce Using RP 3D-Printer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Mohamad Elias (2008) The Effect Of Re-Artificial Aging Time On The Impact Toughness Of An Aluminum Alloy For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin, Ahmad Sabri (2008) Pick And Place Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Harith , Amlus (2008) Laser Cutting Of Woods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hazman , Hashim (2008) Smart Car Seat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Kamil, Sued (2008) BMFP 3542 / BMFP 3543: Metrologi Kejuruteraan (Engineering Metrology). [Teaching Resource]

Mohammad Khabib , Khalib (2008) Study On Boronizing And The Kinetics In Low Alloy Tool Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Qayyum , A. Shukor (2008) Normal Mode Analysis Of An Exhaust Pipe. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Radzi, Motsidi (2008) DITS 2213: Sistem Pengoperasian. [Teaching Resource]

Mohammad Shah Izham, Abdull (2008) A Feedback Control System For Suppressing Crane Oscillations With On-Off Motors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq, Halim (2008) Tool Wear Characterization Of Carbide Cutting Tool Inserts In A Single Point Turning Operation Of Aisi D2 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syazwan, Omar (2008) Force Analysis On Robotic Deburring Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adib Muizzuddin, Mohlis (2008) Predicting Turbulent Flow In A Staggered Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adri , Mohd Fuad (2008) Design Of Hybrid Power Supply For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adzwan, Addly (2008) Quenching- Tempering Effects On Fracture Properties In Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Affendy , Samdin (2008) Study Performance of Cylindrical Grinding On Straightness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afif, Abdul Wahab (2008) Analysis Of Hand Strength For Pinching Activity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afzanizam, Mohd Rosli (2008) BMCG 2133: Termodinamik. [Teaching Resource]

Mohd Aizat, A. Hamid (2008) The Study Of Size Effect On Surface Finish When Hard Turning Aisi D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Ahmad Murad (2008) Automatic Can Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin , Muntaha (2008) Rekabentuk Nozel Semburan Berputar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akram Zaki, Mohd Sabri (2008) Performance Analysis Of Evaluation Between Oil Based Coolant And Combination Of Oil Based Coolant With Palm Oil On Cutting Surface In Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Al Hafiz , Osman (2008) Modelling Rayleigh Fading Propogation And Effect In Wireless Communication Channel Using Matlab. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Al-Jufri , Md Zin (2008) Pengesanan Dan Pengawasan Alat Pengesan Bilik Tertutup. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amran, Ali (2008) Development Of Acrylic Plastic Injection Mould Base For Education Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aras, Mohd Shahrieel (2008) BEKM 4673: Sistem Pintar & Kecerdikan Mesin. [Teaching Resource]

Mohd Aras, Mohd Shahrieel and Abd Aziz, Mohamad Zoinol Abidin (2008) Dielectric Resonator Antenna (DRA) for Wireless Application. In: INTERNATIONAL RF AND MICROWAVE CONFERENCE PROCEEDINGS, 2- 4 December 2008, Kuala Lumpur, MALAYSIA.

Mohd Aras, Mohd Shahrieel and Mohamad Zoinol Abidin, Abd Aziz and Rasin, Zulhani (2008) An Array of Dielectric Resonator Antenna for wireless application. In: 2008 IEEE INTERNATIONAL RF AND MICROWAVE CONFERENCE PROCEEDINGS, 2-4 december 2008, Kuala Lumpur, Malaysia.

Mohd Ariff , Mat Hanafiah (2008) BEKE 2533: Pemacu & Penggerak Elektrik. [Teaching Resource]

Mohd Arizam , Abu Seman (2008) The Development Of Visual Indicator For Engine Maintenance In Cars. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Arshad, Mohd Khairul Azmi (2008) Microstructural Characterization Of Corrosion Products For Natural Gas Pipelines In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashmawi, Baharuddin (2008) Generation And High Voltage AC Tecs On Insulator (Plywood). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraf , Abd Kadir (2008) EDM Performances Of Copper Electrode On Different Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashraf , Mohd Fauzan (2008) Co2 Laser Engraving Of Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asraf , Abd. Samad (2008) Mencipta Dan Memajukan Alat Penghantaran Dan Pengisian Mudah LPG Dari Tangki Komersial Ke Tangki Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asraf , Jasni (2008) Automated Guided Vehicle (AGV) Using PLC System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Yusuff (2008) BMCD 4543: Keboleharapan Dan Kualiti Reka Bentuk. [Teaching Resource]

Mohd Asyraf , Samsudin (2008) A Study Of Technician Perception On Training Attended With Work Performance. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azariman, Abd Karim (2008) Earthquake And Tsunami Warning System via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azham , Azmi (2008) Investigation Of Mechanical Properties Of Aluminium 2024 - Stainless Steel 304 Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhrul, Mohd Alias (2008) Numerical Simulation Of Combustion Process In A Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azidin , Che Ismail (2008) Design And Development Of Automated Submission Assignment Depositor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azidin , Che Ismail (2008) Design And Development Of Automated Submission Assignment Depositor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azim, Ridzwan (2008) Design And Development Of An Automotive Seat For Safety. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Awang Su (2008) Pembaharuan Rekaan Ke Atas Produk Tempatan (Rekaan Baru Ke Atas Telefon M-Mobile). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Daud (2008) Develoment Of Pick And Place Pneumatic Manipulator Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmel, Aziz (2008) Joining Performance Of Aluminum T6063 Using GMAW Welding. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Azmi , Ismail (2008) Small Signal Model Of The Cockcroft-Walton Voltage Multiplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmil , Ariffin (2008) Assessment Of Working Posture At Different Workstation Design For Socket Adapter Assembly Using RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azri, Abdul Aziz (2008) Pengingat Masa Perubatan Digital. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azrin, Ismail (2008) Merekabentuk Pengawal PID Untuk Mengawal Kedudukan Motor Dengan Menggunakan Sistem Pakej Simulasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan , Adnan (2008) Fence Intruder Detection System (FIDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basri , Ali (2008) BMCS 1323: Mekanik Pepejal I. [Teaching Resource]

Mohd Edeerozey, Ab Manaf (2008) BMFB 3263: Pencirian Bahan (Materials Characterization). [Teaching Resource]

Mohd Effendi , Husin (2008) Design And Timing Analysis Of Variable Valve Timing (VVT) For Internal Combustion Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ezuwan, Kassim (2008) Designing And Analyzing Preliminary Parts Of An Aerostat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ezwan, Md Said (2008) Network Analysis And Design At Wisma Negeri. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadhlan, Zahari (2008) Aerodynamic Investigation Of A Commercial Vehicle Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Zulkifli (2008) BITP 3433: Keselamatan Teknologi Maklumat Dan Pangkalan Data. [Teaching Resource]

Mohd Fadzli, Abdollah and Rafidah, Hasan (2008) A Study On The Re-solution Heat Treatment Of An Aluminum Alloy (Kajian Ke Atas Rawatan Haba Semula Aloi Aluminum). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Awang (2008) The Development Of A Mobile Multimedia Log Book. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Che Ab Aziz (2008) Generation And HVDC Test On Isulator (Vulcanized Rubber). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Baharuddin (2008) Design Development Of A Pallet Stacker Through Integration Of Ergonomic Assessment And Quality Function Deployment (QFD) At Machine Shop In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi , Shafie (2008) Flexural Strenght And Analysis Of Mullite Bonded Silicon Carbide Sintered At Various Heating Period. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faidzal, Khalidir (2008) Mobile Searching Engine For Learning Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faidzal , Salkah (2008) Oil Palm Seed Transporter : Structure Analysis & Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairid, Baharim (2008) Kesan Sirip Ke Atas Tempoh Pendidihan Air Di Dalam Cerek Biasa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairous , Idris (2008) Multipurpose Motor Drive System For Small Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairus , Abdollah (2008) DEKC 3453: Mikropemproses. [Teaching Resource]

Mohd Fairuz Iskandar, Othman and Nazrulazhar , Bahaman and Zulkiflee, Muslim and Haniza, Nahar and Mohd Najwan, Md Khambari (2008) Assessing wireless security implementation in government and private sector companies in Malacca-a case study. In: 2008 Student Conference on Research and Development (SCOReD 2008) , 26-27 Nov. 2008, UTM, Johor. (Submitted)

Mohd Fairuz Iskandar , Othman (2008) BITS 3313: Pentadbiran Dan Pengurusan Rangkaian. [Teaching Resource]

Mohd Faizal, Halim (2008) Study The Failure Phenomenon On Proton Waja's Door Handle And Redesign The Model To Reduce Failure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizi, Abd Halim (2008) Design Of Low Cost 3 Digit Digital Tachometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqruddin, Che Ishak (2008) An Interactive Learning On Load Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Radzi, Tahiruddin (2008) Merekabentuk 'Diffusion Silencer' Untuk Mengurangkan Kebisingan Enjin 2 Lejang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhan, Alias (2008) Study On Chassis Vibration Induce By Power Train And Engine Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Mizan (2008) PC Based Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faridzan, Azizan (2008) Programmable Water Jet Show In Aquarium Controlled By PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farmezee, Abdullah (2008) Membuat Dan Menguji Unit Kawalan Suhu. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faza Fauzan , Mohd Alias (2008) Ergonomic Evaluation Of Manual Load Lifting In Metal Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazli, Manaf (2008) Merekabentuk Dan Melaksanakan Sistem Kawalan Paras Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Abd Rahim (2008) Mereka Bentuk Sebuah Pam Lumpur Anti Sumbat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Rusli (2008) Development Of Servo Motor Pick And Place Robot With PIC16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Hussain (2008) The Development Of An Active Roll Control For Heavy Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Rusli (2008) Development Of Servo Motor Pick And Place Robot With PI16F877A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiez, Ismail (2008) Design Of PI, PID, PD Controller For DC Motor Speed Controls Using Analog Circuitry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafifi , Muhammad Hanafiah (2008) A Controller Design For An Expansion Valve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafis , Bajuri (2008) Analyze The Performance Between Pure Oil-Based Coolant And Combination Of Oil-Based Coolant With Palm Oil On Cutting Surface In Milling Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Abdul Manan (2008) Intelligent Line Follower Robot Using LDR Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Hamzah (2008) Penyediaan Bahan Piezo Seramik Melalui Gabungan Sol-Gel Dan Pemprosesan Seramik Secara Konvensional. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Abd. Rahman (2008) Utilization Of Oil Palm Shell Powder (OPSP) As Filler In Acrylonitrile-Butadiene-Stryrene (ABS) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz Fahmi , Md Fadzah (2008) An Interactive Learning On Power System Control (ILPOSCO). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hafizoul, Omar (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizoul , Omar (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haidi , Basiran (2008) A Vision Based Positioning For Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haidy, Dzulfakry Thani (2008) Design For An Automated Door Lock (Smart Keyless Entry). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairi, Mohd Shafie (2008) Develop PC Based Controller Using PIC16F84A For Flying Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairi , Hamad Tajudin (2008) Study On Drilling Aero Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairy , Basir (2008) Penilaian Prestasi Keatas Mekanisma Penjanaan Semula Tenaga Kinetik Gas Ekzos Untuk Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haizal , Mohd Husin (2008) DACS 1232: Kimia. [Teaching Resource]

Mohd Halme, Ahmad (2008) Merekabentuk Sistem Mekanisme Penutup Untuk Tiub Pengumpul Darah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hamdan , Hamir Nordin (2008) Pemprosesan Bunyi Menggunakan Matlab. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hanafi, Suhaimi (2008) Analysis Of Porosity And Its Effect On Mullite Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafi , Mohd Sadri (2008) Manufacturing Modeling And Simulation In A Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Che Hasan (2008) DEKC 1513: Pengukuran. [Teaching Resource]

Mohd Hanif, Harun (2008) Design An Active Suspension System For Peugeot 206. Other thesis, Coventry University.

Mohd Haniff, Mohamed (2008) Merekabentuk Dan Menganalisis Go-Kart Berkuasa Bateri Bagi Tujuan Perlumbaan Formula Pelajar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hasrul Ariff, Saidin (2008) Voice Recognition For Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hayatulnizam, Mohd Nasir (2008) Moving Train-Car Traffic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazizul , Yusran (2008) Modeling DC Motor Position Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Herman, Mohd Aris (2008) PLC Interfacing Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilmi, Zakaria (2008) Ultrasonic Range Meter Using PIC 16F873A Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilmy , Abdullah Zawawi (2008) Energy Saver Power Factor Controller For Induction Motor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hisham, Nordin (2008) BMFA 2413: Sistem Kawalan (Control System). [Teaching Resource]

Mohd Husharilamri , Husain (2008) Design And Development Of A Dual Acting Magnetically Activated Shock Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Husin, Mohd Haizal (2008) DACS 1233: Kimia. [Teaching Resource]

Mohd Husni , Zakaria (2008) Reception Of Voice Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Idzan , Ibrahim (2008) Design And Development Studies Related To Peristaltic Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikhwan , Abu Bakar (2008) DC Motor Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irfan , Mat Rozali (2008) Humanoid Robot Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irman, Ramli (2008) The Evaluation of Mechanical Properties and HAZ Analysis of Austenitic Stainless Steel AISI 304L Weldments. Masters thesis, Coventry University.

Mohd Irnaiman, Bakir (2008) Automatic Level Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irwan Shah, Mohd Abu (2008) Penyediaan Serbuk Hidroksiapatit Melalui Teknik Pemendakan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ishammudin, Mohd Yunus (2008) Design And Development Of Grass Cutting Machine Using DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ismail, Jarkasi (2008) Kajian Sifat-Sifat Serangga Dan Rekabentuk Mekanisma Penghalu Serangga Secara Tidak Bertoksik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Isnaini , Masran (2008) Study The Effect Of EDM (die-sinking) Parameters On Surface Roughness For Machining Tool-Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izhar, Sapie (2008) Performance Analysis Of Different Shape Of Carbide Insert For Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izzuwan, My Yusoff (2008) Design PI, PD,PID Controller For Motor Speed Control Using Simulation Package. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jabar , Mohd Shuhari (2008) The New Invention Of Electromechanical Dustbin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Juhaidil , Mohd Kamar (2008) Development Of Hardware Part Of Smart Attendance System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Khair, Salehan (2008) Design Of A Physical Model Of The Car Charging System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairi , Abdullah (2008) Heat Transfer To Fluids In Laminar Flow Through Ducts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Izwani , Saripudin (2008) Jatisyscrm. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Khairul Izzat , Alwi (2008) Design Of JIG Used To Hold Ball Valves For Surface Polishing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairulnizam, Mhd Nasir (2008) Design And Development Of Automated "Press Device" For Emerged Stamp. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khanapi, Abd Ghani (2008) An Integrated And Distributed Framework For A Malaysian Telemedicine System (My Tel). PhD thesis, Coventry University.

Mohd Masdiq , Shahmarudin (2008) Automatic Switch Controller. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Muiz Rahimi, Mohd Nizan (2008) Documentary Video: Kembara Warisan-Beca Berhias Melaka. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Mushrif , Abd Razak (2008) Merekabentuk Dan Menguji Injap Kawalan Air Paip Utama Untuk Tangki Simpanan Air Hujan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nabil , Che Zam Fadzilah (2008) UTeM Security Audit Via Penetration Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nafis , Mohaizi (2008) Product Design Evaluation Of Lucas Hull DFMA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Naim, Sapie (2008) Fabrikasi Alat Pelontar Bola Takraw. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Ab Rahman (2008) Reka Bentuk Prototaip Unit Penyejuk Bahan Api Petrol. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nashriq, Sulaini (2008) Design And Fabrication Of Solar Assisted Drying Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasrul, Muhammad Adam (2008) Penentuan Jangkahayat Kelesuan Terhadap Keluli Tahan Karat Di Bawah Pengaruh Suhu Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Naszri , Zainal (2008) Mobile DC 12V To AC 240V 50Hz Converter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nawawi, Abdul Rahman (2008) Vehicle Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazif , Che Nok@Nawi (2008) Design And Development Of Automated Irrigation System For Home Garden. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nazuan Hakim , Masrul (2008) The Development Of 3D Animation Story Title Mimpi Ngeri Using Facial Expression Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Fahmi , Ismail (2008) Generation And HVAC Test On Insulator (Vulcanized Rubber). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Hafiz, Biding (2008) Parking Counter With Automatic Crossbar And Led Display. Project Report. UTeM, Melaka. (Submitted)

Mohd Nor Azyadi , Mamat (2008) Network Simulation Performance Kolej Teknologi Bestari. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Hazlami, Nor Adnan (2008) Heat Flow Analysis Of Solar Assisted Drying Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nur Yassieen, Mat Zaki (2008) Remote Terminal Unit (RTU) Based On Electrical Load Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nursarhan , Rosdi (2008) Fabrikasi Dan Analisis Komposit Diperkuat Gentian Di Bawah Beban Paksi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Shahrul Hafez (2008) Modelling And Simulation Of Engine Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razif, Mustapha (2008) Courseware For Software Engineering Subject (Software Cost Estimations). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razif , Ismail (2008) Generation HVDC And Test On Insulator (Plywood). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhuan , Mohd Noor (2008) Boronizing Effects On Impact Toughness Of Low Alloy Tool Steel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ridwan, Razali (2008) Design And Fabrication Of Energy Efficient Drying System For The Solar Drying Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Ab Kadir (2008) Membangunkan Fabrikasi Mesin Pembengkok Paip Yang Digerakkan Dengan Kuasa Motor Manual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Jamil (2008) Membangunkan Penjana Elektrik Mudah Alih Menggunakan Cecair Petroleum Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizuan, Baharon (2008) BACS 1113: Aljabar Linear. [Teaching Resource]

Mohd Saad , Norhashimah and Hashim, Nik Mohd Zarifie (2008) BENC 4133: Pemprosesan Isyarat Digit. [Teaching Resource]

Mohd Sahlan , Nek Arifin (2008) English Malay Translator : The Case Study Of Programming Technique Subject (BITP 1113) (EMT). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Sahril, Amat Aripi (2008) Intelligent Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saiful Azhan , Sidik (2008) Pembangunan Teknologi Hidraulik Air Bertekanan Tinggi Untuk Sistem Hidraulik Bergerak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saiful Azim, Khairul Anuar (2008) Text Encryption And Decryption Software Using Microcontroller. Project Report. UTeM, Melaka. (Submitted)

Mohd Salleh, Mohamad Amran and ABD RAZAK , JEEFFERIE and Ibrahim, Nor Azowa and Fakhru'l Razi, Ahmadun and Abd Rashid, Suraya (2008) The Influences of Melt-Compounding Parameters on the Thensile Properties of Low Filler Loading of Untreated-MWCNTs-Polypropylene (PP) Nanocomposites. Journal of Engineering Science and Technology, 3 (1). pp. 97-106. ISSN 1823-4690

Mohd Seth , Sulaiman (2008) Remote Starter Kit For Motorbike. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaffiq Sazali, Mohd Ismail (2008) Reka Bentuk Alat Pelontar Bola Sepak Takraw. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaffran , Zainal Rashid (2008) Product Development Using Reverse Engineering (RE) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaffran , Zainal Rashid (2008) Product Development Using Reverse Engineering (RE) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiee, Mohd Khusyairi Azwan (2008) The Effect Of Lead/Graphite On Aircraft Grade Aluminum Alloy Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiq , Saipollah (2008) Design And Simulation Of Robot Spray Painting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah, Hairol Nizam (2008) BEKC 2433: Isyarat Dan Sistem. [Teaching Resource]

Mohd Shah, Hairol Nizam and Sulaiman , Marizan and Syed Salim , Syed Najib (2008) Obstacle Avoidance for Vision-Based Automated Guided Vechicle (AGV) Using Shortest path Planning. Journal of advanced Manufacturing Technology (AMT). pp. 1-6. ISSN Nil

Mohd Shah, Hairol Nizam and Sulaiman , Marizan and Syed Salim , Syed Najib (2008) Fuzzy Logic Approach for Mobile Robot in Intelligent Space. The Institution of Engineers, Malaysia. pp. 38-45. ISSN -

Mohd Shahir, Che Jusoh (2008) Design New All Terrain Ergonomics Wheelchair For Disable In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahir, Kasim (2008) BMFR 4113: CAD/CAM. [Teaching Resource]

Mohd Shahnawar, Muhmad Pirus (2008) Majlis Bandaraya Melaka Bersejarah Licensing Enforcement System Using SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrin, Darmin (2008) Inexpensive PLC Output Port Expansion Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrizul , Aziz (2008) Analyzing Network Performance In VoIP At Majlis Bandaraya Melaka Bersejarah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrul, Mohd Noor (2008) The Study Of Corrosion On Surface Metal Of Aluminum Alloy (6063) At Window And Door Frame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shakir, Md Saat (2008) BEKG 2323: Prinsip Kawalan. [Teaching Resource]

Mohd Shakir, Md Saat (2008) BENE 4153: Instrumentasi Proses. [Teaching Resource]

Mohd Shapian , Mohd Shuzaily (2008) Ergonomics Analysis Design Of Computer Table For CAD/CAM Laboratory In FKP, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sharil, Abdul Bahari (2008) Rekabentuk Pencengkam Untuk Mekanisma Pengangkat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazwan , Mohd Alias (2008) Analysis Of Human Hand Strength For Griping Activity In CNC Machihing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazwi, Mohd Sharif (2008) Design The Line Follow Robot Sorting Mechanism Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Suffian, Abdul Mues (2008) Magnetic Brake Design And Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Suffian, Mohd Thani (2008) Experimental And Finite Element Analysis Of Fracture Behavior Of Fiber Reinforced Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sufian, Baharom (2008) Analisis Tangga Kegunaan Rumah Dengan Menggunakan Kaedah Unsur Terhingga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Suhairi Irwan, Zahari (2008) Mereka Bentuk Sebuah Alat Menoreh Getah Yang Berkuasa Enjin Kecil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Supian , Sulaiman (2008) Planar Yagi Antenna Design. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Suzaini , Mohd Hamdan (2008) Design, Simulate And Construct 15kV Cockcroft-Walton Voltage Multiplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq , Dzulkapli (2008) Study The Effect Of Wire-EDM Parameters On Surface Roughness For Machining Die-Steel. Project Report. UTeM, Melaka, Malaysia.

Mohd Syahid, Alwi (2008) Moving Train-Car Traffic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syukor, Che Omar (2008) Anti Crash Vehicle Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Taib, Dora and Nik Rahila, Wan Ibrahim and Sharimllah Devi, Ramachandran (2008) Perception Of International Engineering Graduate Students On Malaysian Graduate Education. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Talha, Sofian (2008) Analisis Dan Fabrikasi Sistem Penyejukan Enjin Bagi Kegunaan Ujian Dinamometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Uzair , Mohd Ali (2008) High Rise Building Elevation Monitoring System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Warikh, Abd Razak (2008) BMFB 4213: Kejuruteraan Kakisan (Corrosion Engineering). [Teaching Resource]

Mohd Yazid, Ismail (2008) Design 12V To 230V Power Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuhazri, Yaakob (2008) BMFB 3273 / BMFB 4233: Komposit Dan Bahan Termaju (Composite And Advanced Materials). [Teaching Resource]

Mohd Yusoff , Sulaiman (2008) BMCT 4143: Pemindahan Haba. [Teaching Resource]

Mohd Yusri, Harun (2008) Design And Development Of Turntable For Automatic Sorting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaid , Akop (2008) BMCT 2123: Termodinamik I. [Teaching Resource]

Mohd Zaim, Zulkifli (2008) Design And Construction Of An Automated System For Parts Assembly Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki, Mas'ud (2008) BITS 3423: Keselamatan Teknologi Maklumat. [Teaching Resource]

Mohd Zaki, Zakaria (2008) Reban Ayam Elektronik. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zakiamani , Mat Nawi (2008) Payroll System Using RFID. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zakiran, Zulkiflee (2008) Design A Load Bearing Convertible Structure For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zamzury , Abdullah Sani (2008) Attendance Mangement System Using Fingerprint Scanner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Za’im, Mohd Azmi (2008) Sistem Pemapar Kitaran Masa Dan Kelajuan Motor Berkos Rendah Bagi Tali Sawat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohd Shahril Izuan (2008) Finding the Optimal MAC Protocol for Low-Power High Data Rate Ultra-Wideband (UWB) Networks. In: 9th Annual Postgraduate Symposium 2008 (PGNet 2008), 23-24 Jun 2008, Liverpool John Moores University, Liverpool, United Kingdom.

Mohd Zul Hazmi, Mhd Fauzy (2008) Finite Element Analysis Of Car Alloy Wheel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulfadli, Amiruddin (2008) Crack Analysis In Weld Joints Of Pipes In The Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhafiz, Hussin (2008) Education Path System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Nawang (2008) Design Validation And Development Of Handphone Housing Plastic Injection Mould (Carity). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Zakaria (2008) Programmable logic controller (PLC) based induction motor starter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zuwairy, Rosdi (2008) Development Of Controller For Front Cover Assembly Station For Flexible Manufacturing System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Azwan , Mohammad (2008) Electromagnetic Chip Collector (EMCC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Yusoh, Z. I. and Devaraju, A. and Zakaria, M. H. and Techanamurthy, U. (2008) An Assistive Multimedia Courseware for Dyslexics. In: 13th International Conference in Education.

Mubasyir , Azizan (2008) Wireless Smoke Detector With Alarm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2008) DISCRETIZATION OF INTEGRATED MOMENT INVARIANTS FOR WRITER IDENTIFICATION. In: International Conference on Advances in Computer Science and Technology ACST2008, 2 - 4 April, 2008, Langkawi, Malaysia.

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2008) Invariants Discretization for Individuality Representation in Handwritten Authorship. In: 2nd International Workshop on Computational Forensics - IWCF2008, 7 - August, 2008, Washington DC, .

Muhaimin Zunnur Qoyyum, Mohd Najib (2008) Merekabentuk Pengawal Bagi Sistem Bandul Songsang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Aidil, Karim (2008) Car Security System via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Akmal , Ashaari (2008) Investigating The Welding Parameters Performance Of Spot Welding Process. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Arfauz, A Rahman (2008) BMFA 3453: Sistem Kawalan Termaju (Advanced Control System). [Teaching Resource]

Muhamad Azinuddin , Dahalan (2008) DEKP 3033: Pengamalan Kejuruteraan. [Teaching Resource]

Muhamad Fadhli , Muhamad Fadzil (2008) RFID- Enabled Point Of Sale Terminal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faizal , Mahmood (2008) Inverted Pendulum Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fathil, Moin (2008) Design A Feasible Cloth Drier Utilizing Domestic Waste-Heat For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fazrul , Md Zain (2008) Simulation Of An Articulated Robot Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafiz, Hj.Ithnan (2008) Kajian Sifat Kelesuan Bagi Logam Aloi Karbon Rendah Dengan Dan Tanpa Penambahan Karbida Melalui Ujian Kelesuan Menggunakan Daya Tegangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Herman, Jamaluddin and Mohamad Azmi, Said and Marizan , Sulaiman (2008) EMD Electricty monitoring device for user awareness. In: (2nd International Conference on Intelligent Systems, Modelling and Simulation, 24-28 January 2011, Kuala Lumpur & Phnom Penh, Cambodia. (Submitted)

Muhamad Khairi , Aripin (2008) BEKC 3653: PLC & Automasi. [Teaching Resource]

Muhamad Saiful , Ibrahim (2008) Design And Develop A Power Over Ethernet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yusri , Kabol (2008) Eksperimen Dan Analisis Unsur Terhingga Tiga Titik Kelenturan Komposit Diperkuat Gentian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad, M. and Salleh, Mohd Shukor and Zakaria, M. S. and Gannapathy, Vigneswara Rao and Mohd Nor, Husain and Mohd Ibrahim, Imran and Muhammad Syahrir, Johal and Ahmad, Mohd Riduan and Abdul Aziz, Mohamad Zoinol Abidin (2008) Physical Performance and Cross Layer Design for Wireless Mesh Networks. In: Proceedings of the 4th International Conference on Information Technology and Multimedia at UNITEN (ICIMU' 2008) , 17-19 November 2008, UNITEN.

Muhammad Adeeb, Mokhtar (2008) Development Of Housing Pattern Using Rapid Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Affendi, Mustafa (2008) Analysis About The Effect Of Composition Of Green Bodies On Mullite Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizat , Mohamad Basiran (2008) Developemnt Of SMP Application For Pocket PC. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Azri, Othman (2008) Design And Development Of Autonomous Line Tracking Robot Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fadhlan , Md Fadilah (2008) Access Control List (ACL) Implementation And Simulation Of UiTM Alor Gajah Melaka Network Using Opnet Modelep. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fadhli, Abdul Rahman (2008) A Low Noise Amplifier At 2.45GHz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiq, Shaf'ii (2008) Kajian Rekabentuk Penyenyap Jenis Serapan (Absorption Silencer) Untuk Mengurangkan Kebisingan Enjin Dua Lejang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faisal, Jusoh (2008) Penentuan Jangkahayat Lesu Bagi Keluli Lembut Di Bawah Pengaruh Suhu Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Mispul (2008) Material Handling System Development In Factory Using Catia V5 Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Farid, Ab. Ghani (2008) Real-Time ECG Acquisition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fauzi , Yahya (2008) Low Cost Home Cooling System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Firdaus , Mohammad Naser (2008) Pharmacy Management System-Medicine Selector For Minor Illness And Stock Alert System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Firdaus , Abdul Rahim (2008) Embedded Controller Design For Evaporator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Md Yusof (2008) SCADA-Supervisory Control and Data Acquisition Based On Electrical Load Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafiz, Ahmad Sohan (2008) Effect Of External Agent In The Control Of Vehicle Tyre Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizullah , Abdul Hamid (2008) Radio Frequency Identification (RFID) Enabled Door Access Control System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Haziq Lim, Abdullah (2008) BITM 3213: Komputer Grafik Interaktif. [Teaching Resource]

Muhammad Herman , Jamaluddin (2008) DEKC 3433: Kejuruteraan Perhubungan. [Teaching Resource]

Muhammad Hidayat, Suhaimi (2008) Portable Dragon Fruit Grade Sorter Sensor And Automation Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Husaini, Abdullah Halim (2008) Fault Allocation And Analysis Using PSCAD/EMTDC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Iswan , Ismail (2008) Study Of Sharp Corner Cutting In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izhar, Abdul Raob (2008) Determination Of Effects On Different Compositions Of Polymer Blend Through Extrusion Process And The Mechanical Properties Of An ABS- PVC-LD PE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jamil, Jamaludin (2008) The Effect Of Simulated Acidic Rain For Natural Gas/Petroleum Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jura'aid, Abu Bakar (2008) Motorized Spoiler To Help To Stop Car Faster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairi , Amairuddin (2008) Key And Lock System For Marak Strategi Sdn. Bhd. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Khairul Nizam , Mardi (2008) Mengurangkan Kebisingan Daripada Sistem Sesalur Penyaman Udara. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khoirudin, Zakaria (2008) Design And Analysis On Mechanical Structure Of Climbing Robot Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Lutfi , Abdul Latif (2008) Vacuum System Design For Fry Drying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Naim , Haron (2008) Automatic Bottle Labeling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nizam , Kamarudin (2008) BEKM 4773: Kawalan Elektronik Kuasa Dan Pemacu. [Teaching Resource]

Muhammad Noor Rahim , Hashim (2008) Vehicle Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Noor Rahim , Hashim (2008) Vehicle Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nurul Hafiz , Abdul Malik (2008) Design And Model Making Of Forming Dies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Redzuan, Tajuddin (2008) Membangunkan Teknik Pembersihan Untuk Nata De Coco. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Suhaizan, Sulong (2008) BITP 1323: Pangkalan Data. [Teaching Resource]

Muhammad Suhaizan , Sulong and Mohd Shahir, Kasim and Azlianor Abdul , Aziz and Muhammad Hafidz Fazli, Md. Fauadi (2008) A Mobile Application Architecture for Measuring Shaft Misalignment. In: International Conference on Plant Equipment and Reliability (ICPER), 27-28 March 2008, Selangor.

Muhammad Syahrir, Johal (2008) DENT 3463: Komunikasi Digit. [Teaching Resource]

Muhammad Syahrir, Johal (2008) BENT 4113: Sistem Perhubungan Digit. [Teaching Resource]

Muhammad Syamil, Junid (2008) The Fabrication Of Porous Ceramic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Wazir Shafiq, Aripin (2008) Pembangunan Sistem Pneumatik Di Dalam Radas / Mesin Pembungkusan Buku Untuk Kegunaan Harian. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Zuhair , Noor Azlan Shah (2008) 3D Animation Using Cel-Shading Rendering Technique : Kura-Kura Dan Monyet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammadon, Mohd Faizal (2008) Embedded Controller Design For A Compressor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Firdaus, Md. Tahir (2008) Redesign Of A Cradle For Aircraft Maintenance Using Ergonomics Analysis And Quality Function Deployment (QFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nurulhafizan, Mahat (2008) Time And Temperature Effects On Fracture Properties Of Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Ridzuan, Mansor and Nurfaizey, Abdul Hamid and Mohd Zaid, Akop and Mohd Afzanizam, Mohd Rosli and Mad Nasir, Ngadiman and Mohd Syakir, Mohtarudin and Habirafidi, Ramli (2008) Development Of Composite Body Panels For Formula Student Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhhamad Hairi, Zubir (2008) Design An Evaporative Roof Cooling System Using Water For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mulyaningrum, . and Suraya, Ahmad and Othman, Aman (2008) Microfinance For Rural Entrepreneurship Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Munirah, Abdullah (2008) SMKTD Events Calendar System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa , Yusuf Lada (2008) Grid Tracking For Mobile Robot Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musse Mohamud , Ahmed (2008) BEKP 3453: Penjanaan & Penghantaran Kuasa. [Teaching Resource]

Mustafar , Ab. Kadir (2008) BMCI 3533: Reka Bentuk Industri. [Teaching Resource]

Muzalna, Mohd Jusoh (2008) BMFP 3562: Penyelidikan Operasi (Operational Research). [Teaching Resource]

N

Nadatul'Iffah , Abu Hasan (2008) The Development Of Prison Management System (PRMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nadia, Nasir (2008) The Development Of Recipe Management System (PRMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadiah , Mohd Nasir (2008) Microwave Hairpin Filter Design. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nadiah Farhana , Hamzah (2008) Design Of Wheelbarrow For Construction Industry Utilizing Ergonomics Analysis And QFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nanna Suryana, Herman (2008) BITM 3413: Sistem Maklumat Geografi. [Teaching Resource]

Nantha, Muniandy (2008) Mechanical Properties Of Wood Plastic Composite (WPC) Made Of Recycled High Density Polyethylene (HDPE) And Recycled Wood Flour (RWF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasiruddin, Khairuddin (2008) Fabrication Of Silicone Rubber Mould For Vacuum Casting Machine For Various Part Geometries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasrul Muhaimin , Ab Rahman (2008) Simulation Of Multipath Channel Radio In Wireless Local Area Network (WLAN). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Natasha, Musa (2008) An Experimental Study Of Material Property (Hardness) Parameter For Surface Grinding Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazihan, Aziziuddin (2008) Implementation Of Three Step Search (TSS) Algorithm In Motion Estimation Method Using Matlab. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nazirah , Zainal Abidin (2008) Tunable Combline Bandpass Filter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nazliah, Abdul (2008) Study On Tempering Effects In Gas Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazri , Md Daud (2008) BMCG 2173: Terma - Bendalir. [Teaching Resource]

Nazrulazhar, Bahaman (2008) BITS 1313: Komunikasi Data Dan Rangkaian. [Teaching Resource]

Nazrulhisham, Zaidan (2008) Comparative Study Of Energy-Efficient Fluorescent Lamps (Compact Fluorescent Lamp). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Li Ching (2008) Development Of Self-Parking Car. Project Report. UTeM, Melaka. (Submitted)

Ng, Shirley Hwee Sun (2008) Design And Performance Study Of A Centrifugal Compressor Used In Helicopter Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yuet Wan (2008) A Study Of Basin Frame Production : A Project Management Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng , Poo Heng (2008) Development Of An Embedded Controller For Stepper Motors Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ng , Chor Liang (2008) Development Of A Semi-Automated Material Handling System For Laser Cutting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngo, Hea Choon (2008) DACS 1253: Matematik Sains Komputer I. [Teaching Resource]

Nguyen, Q.T. and Naguib, R. N.G and Abd Ghani, M. K. and Bali, R. K. and Marshall, I. M. and Phuong, N.H. and Culaba, A.B. and Wickramasinghe, N.S. and Shaker, M.H. and Lee, R.V. (2008) An analysis of the healthcare informatics and systems in Southeast Asia: a current perspective from seven countries. International Journal of Electronic Healthcare, 4 (2). pp. 184-207. ISSN 2008.019792

Nguyen, Q.T. and Abd Ghani, M. K. and Naguib, R. N.G and Bali, R. K. and Marshall, I. M. (2008) Issues and Challenges in the Development of Electronic Health Records in Malaysia and Vietnam. In: VN-HISMANAG’08 - Conference on Applications of Medical Informatics in Hospital Management, 2008, Vietnam.

Nie Nasuriana , Sidek (2008) Developing A Face Recognition Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nik Ahmad Bukti , Nik Yusoff (2008) Temperature Sensor Terminal For Can Bus Data Acquisition System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nik Faiz , Nik Ab Wahab (2008) The Effects Of Heat Treatments On The Mechanical Properties Of Law Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Intan Hazura, Nik Abdul Halim (2008) Non Intrusive Liquid Level Detection Using Optical Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Faizal, Wan Zulkifli (2008) Oil Particle Analysis-Miyazu 1. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Farid, Che Zainal Abidin (2008) BMFP 3513: Kejuruteraan Industri. [Teaching Resource]

Nik Mohd Hanif, Nik Alwi (2008) Pembangunan Platform Penyelidikan Hidraulik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Norzaliza , Long Hassan (2008) Fabrication Of Strontium Ferrite Magnetic Material Through Wet Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Sakinah , Nik Ab Aziz (2008) Tile's Decision System (TDS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nik Shamila , Nik Shafie (2008) An Experimental Study Of The Impact Of Surface Grinding Parameter On Flatness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Suziatee , Nik Hassan (2008) Projek Sarjana Muda Evaluation System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Niza, Mohd Idris (2008) DENC 2433: Litar Logik. [Teaching Resource]

Niza, Mohd Idris (2008) DENC 2443: Sistem Digit. [Teaching Resource]

Niza, Mohd Idris and Fauziyah, Salehuddin and Norihan, Abdul Hamid (2008) Formation of shallower PN junction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Niza Asyadi, Haji Hamzah (2008) Educational Website For Preschooler : Usability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ajian, Mohd. Lair (2008) An Integrated Model For Optimising Manufacturing And Distribution Network Scheduling. PhD thesis, University of South Australia .

Noor Akmal, Abdul Wahab (2008) Innovative technology in construction management: a case study on Almatab Sdn Bhd. Masters thesis, UTeM.

Noor Akmar, Hassan (2008) Gas Carburizing Effects On Impact Toughness Of Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Aliah, Nordin (2008) Design And Analysis Of Sandwich Beam Make By Combination Of Kenaf Core And Bast. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Asmidar, Ismail Affendee (2008) Design Optimization Of Hollow Beam For The Car Side Door Impact Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azila , Ahmad Zaki (2008) Sistem Pengesan Asap Wayarles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azlin, Bidin (2008) Presentation Skills. [Teaching Resource]

Noor Azlin, Bidin and Safiah , Sidek (2008) Penerapan dan Pentaksiran Kemahiran Insaniah di Jabatan Bahasa. In: Pelaksanaan Kemahiran Insaniah UTeM. Penerbit Universiti, UTeM, pp. 43-52.

Noor Badariah, Asan (2008) Automatic Qiblat Direction Using PDA GPS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Faiezah, Yaakup (2008) Self-Efficacy And The Innovation-Decision Process At Kolej Profesional Mara Melaka : Implication For A Higher Education Institution. Masters thesis, UTeM.

Noor Hafizah , Ibrahim (2008) Application Of Least-Squares Method To Forecast The Reliability Problem Based On The Well And Rejected Items Produced. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Hafizah , Halim (2008) Haji : Visualizing Learning Process Using 2D Animation. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Hubaida, Daud (2008) Design And Implementation Of Vacuum Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Izuani Firdaus , Mohamad Nazam (2008) Real Estate DSS Agents System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Mazlina, Mahmod (2008) DENC 1112: Aplikasi Perisian. [Teaching Resource]

Noor Mazlina, Mahmod (2008) BENC 3123: Struktur Data. [Teaching Resource]

Noor Nadia , Ibrahim (2008) The Development Of Online Short Course System (SCS) For FTMK. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Rosmawati , Mohd Rodhi (2008) Portable Digital Blood Pressure Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Shakirah , Baharum (2008) Performance Analysis Of MIMO-CDMA System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Syairah , Mohd Yusoff (2008) E-Parcel Delivery System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Syazana, Zamri (2008) Project Monitoring System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Zamri, Sudin (2008) Self Automatic Parking Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Zarith Aqmar, Mohamad (2008) An Application Of Radial Basis Function In Identifying Banana Maturity Level. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooraidawati, Azhari (2008) UTeM Sport Center : On-Line Booking Of Facilities And Equipments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorazreen , Nordin (2008) Centralized Childcare Centre System In Malacca. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noorhaslina , Zhaki (2008) FTMK Subject Result Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noorhayati , Shaharudin (2008) Design Of Safety System For Industrial Robots Works Cells. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noornadia , Wan Azmy (2008) Internet-Based Clinical Decision Support System. Project Report. UTeM, Melaka. (Submitted)

Nor Akramin, Mohamad (2008) BMFP 4543: Pengurusan Projek (Project Management). [Teaching Resource]

Nor Asmah, Mohd Noordin (2008) Modern Control Of Magnetic Bearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azah, Abdul Aziz (2008) Factors Influencing Cash Flow Deficiency Among Small And Medium-Sized Enterprises In Melaka. Masters thesis, UTeM.

Nor Azimah , Mohamad (2008) Vacuum Vessel Design For Fry Drying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azira , Ramli (2008) Single Phase Single Stage High DC Voltage Multiplier Converter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Azman, Abu (2008) BITS 3413: Keselamatan Teknologi Maklumat Dan Rangkaian. [Teaching Resource]

Nor Azura, Jaimin (2008) Path Planning For Automatic Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Diana, Hashim (2008) Time Study Method Implementation In Manufacturing Industry. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Fasihah , Azizan (2008) Digital Baseband Processing For Ultra Wideband (UWB) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafeizah, Hassan (2008) BITP 3223: Pengurusan Projek Perisian. [Teaching Resource]

Nor Hafizah, Che Hassan (2008) Automatic Street Lighting Control System With Fault Current Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafizah , Adnan (2008) Mengkaji Kesan Pengaruh Kelembapan Relatif Ke Atas Sifat - Sifat Mekanikal Papan Gentian Berketumpatan Sederhana (MDF) Mengikut Keadaan Persekitaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafizah , Zulkiflee (2008) Math Adventure How High I Can Fly A Multiple Ending Game. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Halimah , Muzammel (2008) Smart Antenna For Handset Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Halimahtun Saadiah , Mohd (2008) Speed Control For Direct Current (DC) Motor With An Approach Of Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hanisah , Mohamad (2008) Sistem Pengurusan Sekolah Banang Jaya. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Haryanti , Dahalan (2008) PC Based ECG Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hasliza , Abdul Hamid (2008) M-Learning For Healthcare-The Development Of Mobile Learning System For Pregnancy Support. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hisham , Ahmad (2008) UTeM Class Assistant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Iskandar Shah , Zamri (2008) Fresure Beverage Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Mahafizah , Mohd Rathi (2008) Kajian Ke Atas Taburan Suhu Di DalamTangki Simpanan Air Panas Solar Secara Menegak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Mas Aina, Md. Bohari (2008) BITP 2303: Pengaturcaraan Pangkalan Data. [Teaching Resource]

Nor Najihah, Awang (2008) Inverted Pendulum System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Nazihah, Hashim (2008) Learning Multiplication Table In Mobile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shaufina , Md Ja'afar (2008) Effect Of Size And Shape Of Specimen On Hardness Of Steel Through Heat Treatment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shuhada , Hashim (2008) FTMK Academician Management System (FTMK AMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Shuhaney, Mohd Said (2008) Game Based Learning For Mild Level Of Attention Deficit/Hyperactivity Disorder (ADHD) Children Courseware. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Suzyliana, Ahmad (2008) Design Of Proximity Microstrip Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor'Ain , Mohd Yunus (2008) Petrol Station Management System-Case Study For Caltex Petrol Station. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nora, Mamat (2008) Learning Solat For Children 6 To 12 Years Old Using 2D Animation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nora, Razali (2008) RFID-Enable Health Data Management System In Post Natal Wards. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nora Zainab , Mohamed Ariff (2008) Network Calculator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norafzan , Mohd Ranai (2008) Determination Of The Effects On Different Compositions Of Polymer Blend Through Extrusion Process And The Mechanical Properties Of An PVC-PP-ABS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norahayu , Mohd Ramly (2008) FTMK Lecturer's Appoinment System (FLAS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noraihan , Ishak (2008) Inventory Database System Using Radio Frequency Identification. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noramirah , Zainal Abidin Jaafar (2008) Development Of Prototype Mobile Physic Approach-Comparison Between Transverse Waves And Longitudinal Waves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasiken, Bakar (2008) BITM 1113: Sistem Multimedia. [Teaching Resource]

Norasiken, Bakar (2008) Makmal Maya Kimia Berasaskan Pendekatan Kognitivisme, Konstruktivisme Dan Konteksual (VLAB-CHEM). PhD thesis, Universiti Kebangsaan Malaysia.

Norasra, A.Rahman (2008) BACS 1223: Persamaan Pembezaan. [Teaching Resource]

Norazam, Jamel (2008) Computer Aided Ergonomics Design Analysis In Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazila, Md Posdzi (2008) Design The Hardware For Teaching Aid : Ball Sorter Using PLC. Project Report. UTeM, Melaka. (Submitted)

Norazli, Nordin (2008) The Ergonomic Factor Of A Flexible Writing Table Chair For Left Handed Student. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlin, Mohammed (2008) BITM 2113: Pembangunan Aplikasi Web. [Teaching Resource]

Norazliza , Ibrahim (2008) Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazua , Zulkefli (2008) Interactive Storybook Using Constructivism Theory-Alam Sainsku. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norazura, Ibrahim (2008) The Effect Of Different Ceramic Filler Loading On The Mechanical Properties Of Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordiana, Sidi (2008) Quenching-Tempering Effects On Hardness And Compression Strength Of Carburized Low Alloy Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norena Masliha, Masuri (2008) Measurement And Evaluation Of The Sound Absorption Coefficient For Various Asian Woods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfadzilah , Mohamad (2008) Automatic Fuzzy Logic Controlled Motor For Vacuum Cleaner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafiza, Mohamed (2008) Development Of An Electronic Schedulling Template For Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafizah, Burham (2008) Fuzzy Logic Controller And Its Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafizah , Kaimin (2008) Online Livestock Trading System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norhashimah, Mohd Saad (2008) BENT 2243: Isyarat Dan Rangkaian. [Teaching Resource]

Norhashimah, Mohd Saad and Abdul Rahim, Abdullah (2008) Time-Frequency Analysis Technique For Power Quality Signals. Project Report. UTeM, Melaka Malaysia. (Submitted)

Norhashimah, Mohd Saad and Abdul Rahim, Abdullah and Syafeeza, Ahmad Radzi and Noor Mazlina, Mahmod (2008) Real Time ECG Monitoring System Using TMS320C6713 DSP Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhaslina, Mohamed (2008) Applying Inquiry Based Learning On Human Biology (Blood Circulation). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norhasnina, Mokhtar (2008) Home Control Using PLC And Labview. Project Report. UTeM, Melaka. (Submitted)

Norhayati , Abd Rahman (2008) PC Thermometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah, Nordin (2008) Water Flood Alerting Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah, Mamat (2008) Digital Control Of High DC Voltage Converter Based On Cockcroft Walton Voltage Multiplier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah , Mat Yusoff (2008) Hazard Light Using Movement Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noria , Mohamad Amin (2008) Wireless Barcode Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norida, Abdullah and Ahmad Rozelan, Yunus and Hafzan , Ariffin (2008) KESELARASAN PERSONALITI DENGAN PROGRAM PENGAJIAN DAN HUBUNGANNYA DENGAN PENCAPAIAN AKADEMIK PELAJAR KUTKM. Jurnal PERKAMA, Vol. 1 (June 2). pp. 23-54. ISSN 0127/6301

Norida, Abdullah and Ahmad Rozelan, Yunus and Hafzan , Ariffin (2008) Keselarasan Personaliti dengan Program Pengajian dan Hubungannya dengan Pencapaian Akademik Pelajar UTeM. Jurnal PERKAMA, 14. pp. 23-54. ISSN 01276301

Noridah , Ishak (2008) Real-Time Digital Clock With Voice. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norisham, Ab Muttalib (2008) Developing Software Engineering Courseware (Project Management). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norita, Md. Nasir (2008) Mechanical Properties Of Powder-Based Part Produced By 3 Dimensional Printer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norizal , Arshad (2008) Menganalisa Kerosakan Penyerap Shimmy (Shimmy Damper) Terhadap Unit Pendaratan Pesawat Ringan (Model : Eagle 150B). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norizan , Ismail (2008) Integrated Information System For Air-Conditioning Company : Sales And Services. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norjannah , Nordin (2008) Compact Butler Matrix Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norrul Hija, Jamaludin (2008) Fingerprint Identification. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norseha , Ariffin (2008) PC Based Alarm System With Voice Playback. Project Report. UTeM, Melaka. (Submitted)

Norwahidah, Abd Wahid (2008) Mapping Corrosion Activities Of Various Type Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Adilah , Kamaruddin (2008) Development Of Software Part Of A Smart Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aidawaty, Rafan (2008) A Study On The Performance Of An XY Table For Laser Spot Welding. Masters thesis, Universiti Malaya.

Nur Aisamuddin , Mohamad (2008) Motorized Worktable For Robotic Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Aisyah , Nasir (2008) Orphan Home Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Amalina, Mhd Idros (2008) Analysis And Classification Of Arrhythmias In ECG Signals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azlina, Jamil (2008) Portable Dragon Fruit Grade Sorter-Human Machine Interface Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ezrin , Mad Sariff (2008) Design And Analysis Of Car Side Door Impact Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Faiqah , Fauzi (2008) Flame Imaging Using Optical Sensor And Laser. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Fathyah , Abd Rahman (2008) Animated Pedagogical Agent Courseware On Photosynthesis For School Kids. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Fauzlieyana , Ramli (2008) Mini Weather Station System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Firdausa , Rasnan (2008) Juvenile Detention Center Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Habibi, Mohamad Nasir (2008) Development Of Robot Base Vision System For Part Recognition And Location. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izan Syahriah , Hussein and Segal, Joel and McCartney, Graham and Pashby, Ian (2008) Microstructure formation in Waspaloy multilayer builds following direct metal deposition with laser and wire. Materials Science and Engineering A, 497. pp. 260-269. ISSN 0921-5093

Nur Khaizura, Rasli (2008) Sistem Pengurusan Insentif Pengeluaran Padi (SPIPP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Mazni, Abd Razak (2008) Mobile Learning : Super Pacmath Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadilah , Mansor (2008) The Development Of Smoking Cigarettes Effects On Human Lung Cancer Courseware. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Nazatul Nura , Mohamed Fouzy (2008) Remote Control Lawn Mower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Saaidah, Abu Bakar (2008) Study Of Cooling Water System (Closed Loop) At Hydroelectric Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Suhana , Ishak (2008) Electronic Code Lock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Suria Hanany , Ahmad (2008) SMS Management System For FTMK. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syahiran , Nordin (2008) Model Gantry Crane With Dynamic Feedback Swing Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syuhada , Mohamad (2008) Wireless Mobile Coverage Analysis at Universiti Pendidikan Sultan Idris. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Zairullizam , Zaini (2008) Sistem Pencuci Bilik Air. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Zawani , Saharuddin (2008) High Voltage DC Generation And Testing On Insulator (Acrylic Plastic). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurazhani , Abas (2008) Evaluatiom Of Product Assembability Using Lucas Hull Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurazlina, Md Sanusi (2008) BITP 1213: Pembangunan Sistem. [Teaching Resource]

Nurazlina , Muslim (2008) Wireless Locator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfaizey , Abd. Hamid (2008) BMCA 3633: Rekabentuk Komponen Automotif. [Teaching Resource]

Nurfaizey , Abdul Hamid (2008) BMCT 3183: Enjin Pembakaran Dalam. [Teaching Resource]

Nurfarhana , Mohammad Afandi (2008) Workshop Information System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurhazwani, Md Edros (2008) UTeM SUKSIS Website. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuridawati, Mustafa (2008) BITP 1113: Teknik Pengaturcaraan. [Teaching Resource]

Nuridawati, Mustafa (2008) BITP 1123: Struktur Data & Algoritma. [Teaching Resource]

Nurmala Irdawaty, Hassan (2008) DENE 2143: Isyarat Dan Sistem. [Teaching Resource]

Nurmala Irdawaty, Hassan (2008) DENT 2233: Litar Elektrik. [Teaching Resource]

Nurrul Akma, Mahamad Amin (2008) Malaysian Healthy Eating Decision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursyafeeka , Zainuddin (2008) Distributed Database Pharmacy Management System (PMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul A., Emran (2008) Model-Driven Component Generation for Families of Completeness Measures. In: International Workshop on Quality in Databases and Management of Uncertain Data, In Conjunction with International Conference on Very Large Data Bases (VLDB).

Nurul Ain, Basri (2008) Record Management System For Police Department (RMSPD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Abdullah (2008) The Development Of Encryption And Decryption Algorithm For Secured Data Transfer Using VHDL. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Asyikin, Adenan (2008) Oil Particle Analysis Using Fourier Transform Infrared Spectroscopy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azimah , Ahmad Arzaai (2008) Pemanas Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azni, Ab Aziz (2008) Heart Sound Acquisition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafizah , Md Radzi (2008) Manpower Planning Utilizing Work Study At Data Storage Manufacturing Company. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Hazira , Zakaria (2008) Human Resources Leave Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Hidayah , Ibrahim (2008) Jaya Jusco Sms System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hidayah , Abd Rahim (2008) An Experimental Study Of The Impact Of Cylindrical Grinding Parameter On Surface Roughness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hisyam , Naser (2008) Wireless Data Logger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Huda, Mohd (2008) Losses Fiber Optic Splicing, An Analysis And Calculation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nadia , Abdul Rahman (2008) Rekabentuk dan Pelaksanaan Sistem Penyimpanan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nazmi Shazana , Zakariah (2008) Acronyms & TCPIP Translator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Zawani, Hambali (2008) Design, Development And Analysis Of Body Profile For Ballistic Armour Mould Using Reverse Engineering Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda , Abd Kader (2008) Online Report Card System For Secondary School (ORCAS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurunnadiah , Abdul Hasib (2008) Authentication System For Server Room Using Fingerprint (ASSRUF). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurzafirah , Kamarazaman (2008) Blood Pressure Monitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Ong, Sing Goh (2008) A Framework And Evaluation Of Conversation Agents. Masters thesis, Murdoch University.

Ooi , Wee Tuck (2008) Interfacing Monitoring Device And GUI Development. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Oon , Kar Weng (2008) Fuzzy Logic Controller For An Autonomus Parallel Self- Parking System Using Labview. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Othman, M. F. I. and Bahaman, N. and Muslim, Z. and Nahar, H. and Md Khambari, M. N. (2008) Assessing Wireless Security Implementation in Government and Private Sector Companies in Malacca – A Case Study. In: The 6th Regional Student Conference On Research And Development 2008 (SCOReD), 26-27 November 2008, Skudai, Johor.

Othman, A.R and Che Halim, M.H and Abd Aziz, M. Z. A. and Sahingan, S.A and Selamat, M.F and Abd Aziz, A.A (2008) Low Noise Amplifier for Front End Transceiver at 5.8 GHz. In: International Conference on Electronic Design 2008(ICED2008) , 1-3 December 2008, Penang.

Othman, A.R and Che Halim, M.H and Abd Aziz, M. Z. A. and Sahingan, S.A Sahingan and Selamat, M.F and Abd Aziz, A.A (2008) 5-6 GHz Front End Low Noise Amplifier. In: Proceedings of IEEE 2008 6th National Conference on Telecommunication Technologies and IEEE 2008 2nd Malaysia Conference on Photonics, 26-27 August 2008, Putrajaya, Malaysia, 26-28 August 2008, Putra Jaya.

Othman, Zuraini and Shibghatullah, Abdul Samad and Kasmin, Fauziah and Syed Ahmad, Sharifah Sakinah (2008) THE SURVEY OF NUMERICAL METHODS APPLICATION IN ENGINEERING EDUCATION. In: International Conference on Science & Technology: Applications in Industry & Education, 2008, Malaysia.

P

Paary , Rajan Gunapathy (2008) Long Range Monitoring System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Pong, Kuan Peng (2008) UTeM Counseling Centre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Prasath, Rajandhiran (2008) Investigation On Mechanical Properties Of Stainless Steel 304-Stannum Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Premavathy, Balan (2008) Analog To Digital Converter Remote Control For Helicopter Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Putri Nor Ashiqin , Md Bakri (2008) AET Shipping Crew Scheduling Services (AETSCSS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

R

R. Ahmad , Muhaimin (2008) Critical QA And QC Process Procedures In Pressure Vessel Fabrication. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rabi'atul - Adawiyyah , Hasubullah (2008) Ambience White Noise As A Source Of Random Number. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Radin Zaid, Radin Umar and Nadiah, Ahmad and Isa, Halim (2008) An Anthropometric Evaluation of Workstation Design: A Case Study in an Automotive Industry. In: National Conference on Design and Concurrent Engineering (DECON) 2008 , 28 - 29 October 2008, Melaka, Malaysia..

Rafeek Ahmad, Mohamed Asyraf (2008) Fabrication And Characterization Of Rubber Seed Shell Powder (RSSP) Filled Polypropylene (PP) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah, Hasan (2008) Surface Treatment Of Ferrous Alloys With Carbon And Boron. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah, Ja'afar (2008) Digital Photo Library For UTeM A Study On Photo Composition And Creative Imaging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah, Hasan (2008) BMCB 4073: Tribologi. [Teaching Resource]

Rafidah, Mohamad Noor (2008) Imaging Concentration Profile Of Flowing Particles Using Combination Of Infra Red Emitter And Photoelectric Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah , Hasan and Omar, Bapokutty and Fatimah Al-Zahrah, Mohd Sa'at (2008) Fatigue And Fracture Investigation On Surface Hardened Metals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahiah , Abdul Hamid (2008) Ultrasonic Range Meter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rahifa, Ranom (2008) BACS 1213: Matematik Kejuruteraan. [Teaching Resource]

Raihanah, Abdullah (2008) Feasibility Study On Vacuum Cooker For Domestic Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rainah, Ismail (2008) DMCM 3723: Mekanik Mesin. [Teaching Resource]

Rais , Abdul Majid (2008) Point To Point Text Communicator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Izhar Azuan, Raja Izam (2008) Kajian Kesan Suhu Terhadap Keluli Lembut Pada Daya Serenjang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Mohd Firdaus , Raja Ghazali (2008) Autonomous Maintenance Programme For Lathe Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramani, Anis Niza and Hassan, Mohd Yusri and Abdullah, Md Pauzi and Hussin, Faridah and Jasmani, Noor Zarith Iffah (2008) Deregulated Issues In Electricity Market. In: Deregulated Issues In Electricity Market. Penerbit UTM.

Ramiza , Mohd Yunus (2008) Development Of Algorithm Of Classification Between Human And Non-Human. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ramli, Aziz (2008) Study On The Use Of Starter For Squirrrel Cage Induction Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli , Noor Rafiza (2008) Portable Dragon Fruit Grade Sorter (Power Supply And Structure Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raphael, Stephen (2008) Tempat Duduk Keselamatan Kereta Kanak-Kanak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rashidah, Ismail (2008) Quenching-Tempering Effects On Hardness And Compression Strength Of Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rashidah , Rashed (2008) Game Based Learning For Level 2 Slow Learner Children Courseware On Simple Mathematic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasidan, Basiron (2008) Effect Of gasifier Dimension On Wood Combustion Through CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasidin, Senawi (2008) Low Velocity Impact Behaviour Of Advanced Composite Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasin, Zulhani (2008) BENG 4522: Perhubungan Data & Rangkaian Komputer. [Teaching Resource]

Rasli, Izwan Azrul (2008) Sistem Penyiraman Automatik (Versi 2). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ratna Andariena , Hassan (2008) Development Of The Heart Rate Monitor By Using Finger Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raudzah, Osman (2008) Enhancement Of Leave Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Abd Rahim (2008) Rekabentuk Dan Analisis Sistem Penghantaran Kuasa Kenderaan Industri Yang Berantai. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Mohd Aminudin (2008) Fuzzy Logic Controller For Direct Current (DC) Motor Drive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali , Abd Rahim (2008) Rekabentuk Dan Analisis Sistem Penghantaran Kuasa Kenderaan Industri Yang Berantai. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Redzuan, Abdul Manap (2008) BENT 2123: Isyarat Dan Sistem. [Teaching Resource]

Redzuan, Abdul Manap and Imran, Mohd Ibrahim (2008) BENT 3113: Prinsip Perhubungan. [Teaching Resource]

Renggie, Rudelle Roland (2008) Design Of An Expansion Chamber For Power Tuning Of A Two Stroke Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Reni Suraya , Azwir (2008) Uni Impian SMS Alert Application System (UNISAAS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rishalavernia, Ramanathan (2008) Speech Development Courseware For Down Syndrome Children With Implementation Of Cognitive Theory In Multimedia Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Robani, Anidah (2008) Biografi Mubarak Melaka: Tan Sri Datuk Wira Hj. Abdul Razak Hj. Alias Pemimpin Yang Enggan Bersara. Penerbit Universiti Teknikal Malaysia Melaka. ISBN 983-2948-36-0

Rohana, Abdullah and Adi , Saptari and Isa, Halim and Seri Rahayu , Kamat and Nor Akramin, Mohamad (2008) Productivity Analysis At A Small And Medium Enterprises (SMEs) Focusing On Work Study, Line Balance And Ergonomics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohani, Osman (2008) The Study Of Natural Rubber - Polyethylene Polymer Mixing Mathod. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ronald , Lepon (2008) Development of Anti-Theft Door System for Lecturer’s Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ros Suriayati, Musa (2008) Effect Of Type And Character Of Quenching Medium On Hardness Of Steel Through Heat Treatment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosemariah , Isa (2008) Interactive CD Karaoke Of Sifir Song. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rosfara Adina , Saipul Bahri (2008) Mobile English Courseware Using Storytelling Approach : Goldilocks And The Three Bears. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rosli, Saadan and Ahmad Jawahir, Tugimin and Noor Maslian , Othman (2008) Orientasi Matlamat Dikalangan Atlet SUKMA Melaka : Satu Tinjauan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslina, Mohd Razak (2008) Automatic Power Factor Correction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslina Aida, Rahimi (2008) CFD Simulation And Validation Of Aerodynamic Over Ahmed Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosnani , Che Mamat (2008) The Quality Approach In Kenseisha (M) Sdn. Bhd Company For Electronic Process Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozi Roslinda, Abu Hassan (2008) Communication System Using Optical Fibre. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozie Ezrina, Shuhimi (2008) 3D Infomecial Advertisement : Taknak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruhayu , Mohd. Rukman (2008) Robot Self-Localization In A Known Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rustam, Mohamad Mawardi (2008) Paparan Interaktif Digital Melalui Penghantaran Komputer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rustam, Ramli (2008) Vibration - Free Positioning Of Flexible Systems Using Impulse Shaping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusydah , Jamaludin (2008) An Experimental Study Of The Impact Of Surface Grinding Parameters On The Surface Roughness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusydan Kamil , Kamaruddin (2008) Tool For A Network Monitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruzaidi, Zamri (2008) BMFA 4463: Pembuatan Integrasi Komputer (Computer Integrated Manufacturing). [Teaching Resource]

Ruzita, Joraimi (2008) Kajian Terhadap Penggunaan Minyak Pelinciran Terhadap Modul Enjin Pembakaran Dalam CT 150. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruziyana , Masud (2008) Sistem Sewaan Premis Majlis Agama Islam Johor (2SP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

S

Sabrina , Dangatil (2008) Design And Model Making Of Bending Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali , Herawan (2008) BMCT 3173: Termal-Bendalir Lanjutan. [Teaching Resource]

Safei, Su'aidi (2008) Maktaba Shamela: Comprehensive Personal Digital Library. In: 13th International Conference on Education, 20-23 May 2008, Universiti Brunei Darussalam.

Safei, Su'aidi (2008) PI 5403, Teknologi Pendidikan Islam. [Teaching Resource]

Safei, Su'aidi (2008) PI 5403, Teknologi Pendidikan Islam. [Teaching Resource]

Safuan Effendy , Mat Ghani (2008) Mereka Bentuk Sistem Takungan Air Hujan Bagi Menjimatkan Penggunaan Air Bersih Dan Mengelakkan Masalah Banjir. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Said, M. R and Tan, CheeFai (2008) The Response of Aluminium Foams Under Quasi-Static Loading. Chiang Mai J. Sci., 35 (2). pp. 241-249. ISSN 0125-2526

Saifudin Hafiz, Yahaya (2008) DACS 2212: Matematik Kejuruteraan. [Teaching Resource]

Saiful Nizam , Mohd Padzil (2008) Wood Recognition System Using Neural Network. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Saifulza , Alwi Suhaimi (2008) BEKC 4783: Sistem Pintar. [Teaching Resource]

Saimon, Mohd Asnawi (2008) Design And Implementation Of Automated Filling And Capping Machine Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sakidin, H. and Abu Bakar, M. R. and Abdul Rashid, M. S. and Matori, A. N. and Mohamed, A. and Asmala, A. (2008) The Effects of UNBabc Mapping Function Modification To GPS Tropospheric Delay. Malaysian Journal of Mathematical Sciences, 2 (1). pp. 59-71. ISSN 18238343

Sakidin, Hamzah and Tay, Choo Chuan (2008) IMPROVING STUDENT'S UNDERSTANDING ON ADDITION AND SUBTRACTION OF FRACTIONS USING PROBLEM SOLVING APPROACH. In: INTERNATIONAL CONFERENCE ON THE EDUCATION OF LEARNER DIVERSITY, 2008, UKM.

Saleha Bee, M.Mohd Siraj (2008) Workstudy At Lay Up Process In Preparation For An Aerospace Company Value Stream Mapping And Kaizen Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sally, Yeoh Sheue Ling (2008) Ergonomics Safety Approach In Welding Shop (A Case Study In UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samawi, Ismail (2008) A Development Of A Portable Pneumatic Jacking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Abdul Rahim and Sivarao, Subramonian (2008) Effect of Pressure, Frequency and Duty Cycle on Laser Cut Surface. In: Malaysian Technical Universities Conference on Engineering and Technology, March 8-10, 2008, Putra Palace, Perlis, Malaysia.

Sani Irwan, (2008) BENC 4123: Sistem Masa Nyata. [Teaching Resource]

Sar Muhd Arif, Abdul Rahman (2008) Network Performance Analysis And Design For Akademi Kastam Diraja Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarah Nadiah , Abdul Halim (2008) Effect Of Re-Solution Heat Treatment Time On The Impact Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saravanan , Paramasivan (2008) An Assessment Of Quality Control System In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sardi, Junainah (2008) Backflashover Analysis For 132 kV Kuala Krai-Gua Musang Transmission Line. In: PECON2008, 1-3 dec 2008, Johor Bahru.

Sariansa, Santie (2008) Kajian Kelesuan Logam Berkarbon Rendah Melalui Penyusukkarbonan Dan Tanpa Penyusukkarbonan Menggunakan Beban Regangan Dan Mampatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saritha , Sandra Segaran (2008) Web Based Secure Printing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarvin , Silvarajo (2008) Quality Improvement Using 5S Concept In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazelin, Arif and Norain, Ismail and Shahrulanuar , Mohamed (2008) KEUPAYAAN PEMASARAN DI KALANGAN PENGUSAHA KECIL MAKANAN HALAL DI MELAKA TENGAH : SATU KAJIAN AWAL. In: Persidangan Serantau Nilai & Profesionalisme, 13-14 November 2008, Hotel Equatorial Bangi. (Submitted)

Sek, Yong Wee (2008) BACS 1253: Matematik Sains Komputer I. [Teaching Resource]

Selamat, S. R. and Yusof, R. and Sahib, S. (2008) Mapping Process of Digital Forensic Investigation Framework. International Journal of Computer Science and Network Security , 8 (10). pp. 163-169. ISSN 1738-7906

Selveraj, Subramaniam (2008) Design And Development Of An Automatic Wiper Retractor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaarani, Ahmad Shaarizan (2008) The Intensity of Perceived Emotions in 3D Virtual Humans. In: 7th international joint conference on Autonomous agents and multiagent systems, 2008, Lisbao, Portugal.

Shaarani, Ahmad Shaarizan (2008) Perception of Emotions from Static Postures. Affective Computing and Intelligent Interaction Lecture Notes in Computer Science, 4738 (0302-9743). Springer, Berlin Heidelberg. ISBN 978-3-540-74888-5

Shadira , Saad (2008) Axus Employee Recruitment System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafawi, Shafei (2008) Merekabentuk Peralatan Momen Lenturan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafizal, Mat (2008) BMCD 3523: Rekabentuk Komponen Mesin. [Teaching Resource]

Shahdan, Md. Lani (2008) DITP 2213: Analisa Dan Rekabentuk Sistem. [Teaching Resource]

Shahid , Mohd Ab Rahman (2008) Motion Detection System With Communication Capability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahizatul Afizah , Kaharudin (2008) Mesin Penguji Keberfungsian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahril, Ismail (2008) Mobil Robot In Office. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrir , Alias (2008) Robot Bergerak Mengikut Garisan Dan Mengelak Halangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrizan , Jamaludin (2008) Quadruple Tank System With Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrudin , Zakaria (2008) BEKM 4573: Rekabentuk Sistem Mekatronik. [Teaching Resource]

Sharaynee, Krishnan (2008) Development Of An Expert System For Welding Process Verification Using MS Visual Basic. Project Report. UTeM, Melaka. (Submitted)

Shariman, Abdullah (2008) BMFA 3443: Automasi Industri. [Teaching Resource]

Sharin , Ab Ghani (2008) Modeling And Simulating The Magnetic And Electronic Ballast Fluorescent Lamp System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sheda Akmaniza, Ibris (2008) Kajian Terhadap Kesan Perbezaan Resin Ke Atas Komposit Laminat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shee, Chee Shen (2008) An Analysis Of Jig Designs To Assembly Time In Plug Assembly Line Using Design Of Experiment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shibghatullah, Abdul Samad (2008) A MULTI-AGENT SYSTEM FOR A BUS CREW RESCHEDULING SYSTEM. PhD thesis, Brunel University.

Shibghatullah, Abdul Samad and Hamid , Erman and Bahaman, Nazrulazhar and Mas'ud, Mohd Zaki (2008) Introduction to IPv6: The Need and the Advantages of IPv6. In: Information Technology Seminar 2008, 16 Oct 2008, Kolej Yayasan Melaka.

Shirlyn , Lojumin (2008) Development Of A Three-Jaw Gripper For Rhino Robot For Part Location. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shivarajh, Egambaram (2008) Sustainable Development of Coffeemaker Using Design for Environment (DFE) Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sim, Chee Seng (2008) An Analysis Of Product Quality By Using Quality Control Method In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sisu Arman, Amir (2008) Development Of Quarter Car Test Rig For Vehicle Ride Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aidah, Wardi (2008) An Automated Domestic Water Purification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aisyah , Anas (2008) Develop An Arrangement System For Lecture Rooms And Laboratories Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Azirah, Asmai and Zuraida , Abal Abas and Abd Samad, Hasan Basari and Ahmad Fadzli Nizam, Abdul Rahman (2008) Development Of Intelligent Maintenance Decision Support Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar , Sheikh Md. Fadzullah (2008) BMCG 2423: Bahan Kejuruteraan. [Teaching Resource]

Siti Hajar , Zainal (2008) Malacca Driving School Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Hajar , Sheikh Md.Fadzullah (2008) BMCM 4473: Bahan Komposit. [Teaching Resource]

Siti Hanafiah , Juddin (2008) Infra Red (IR) Based Tomography System : A Comparison Between Orthogonal And Fan Beam Projection. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Hawa, Mat Isa (2008) Music Synchronized Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Huzaimah, Husin (2008) DENE 3263: Elektronik Industri. [Teaching Resource]

Siti Huzaimah, Husin and Zulkifli, Sharif (2008) BENE 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Siti Iradah, Ismail (2008) Interactive CD Learning For The Treatment Of Autism Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Junairah , Alias (2008) FTMK Cubicle Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Khadijah, Idris @ Othman (2008) BENT 2113: Litar Elektrik 2. [Teaching Resource]

Siti Khadijah, Idris @ Othman (2008) BENG 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Siti Khairunnisa , Abd Raheem (2008) Centralized Tutorial System. Project Report. UTeM, Melaka, Malaysia.

Siti Kholijah, Nasaruddin (2008) Student E-Outing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Noor Elyina, Ab Zarim (2008) The Use of MGO as Sintering Aid for Alumina Ceramics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norhidayah , Mohamed (2008) Log Periodic Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurulaini , Abdul Nasir (2008) FKP Visualization Floor Plan System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Rahmah, Mohd Alias (2008) Design Improvement Of A Household Appliance Using DFMA. Project Report. UTeM, Melaka Malaysia. (Submitted)

Siti Rahmah, Shamsuri (2008) DMFD 3253: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Siti Rosmaniza , Ab Rashid (2008) Design, Fabricate And Measurement Of A Low Noise Amplifier For Wimax Applications. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Rozaemmah , Rohani (2008) Mobile English Guide Of Common Errors And Expression For Secondary Schools. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Saeidah , Mohd Zaki (2008) Anti-Swing And Positioning Control Of A Gantry Crane System Using Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sarah Nur, Rezuan (2008) Rental Vehicle System (RVS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Suffiah , Ibrahim (2008) Malay Idioms For Standard 4 Using Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zulaiha, Yusoff (2008) Design A Up Side Down Robot Gripper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siva Kumar, (2008) DENG 1113: Asas Elektronik Dan Mikropemproses. [Teaching Resource]

Sivarao, Subramonian and Abdul Rahim, Samsudin (2008) Design And Development Of Super Saving And Comfort Home Cooling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian (2008) BMFS 4343: Teknologi Alat Pemotongan (Cutting Tool Technology). [Teaching Resource]

Sivarao, Subramonian (2008) DMFD 2323: Proses Pembuatan (Manufacturing Process). [Teaching Resource]

Sivarao, Subramonian (2008) Design and development of non-conventional power train system. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian (2008) Super Saving Cooling System: A New Design and Analysis for Home Air-Conditioning. In: Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), 24 – 27 November 2008, Curtin University of Technology, Miri, Sarawak.

Sivarao, Subramonian and sivasan, karan nair (2008) Regression Model Development For Two Layer Control System Based on Engine RPM. In: Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), 24 – 27 November 2008, Curtin University of Technology, Miri, Sarawak. (Submitted)

Sofia Hanoum, Jamaludin (2008) Wanderlux Travel Online System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Song , Chien Shyen (2008) Control Of 5 DC Motor For Application In Robot Manipulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soon , Boon Hock (2008) Develop A Template Of Messenger For An Organization Communication Through Intranet Using Client-Server Technology. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Stephanie, Nanta (2008) Shop Inventory System Using Optical Character Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Stephanie , Piang Fah (2008) Penyelarasan Geganti IDMT Arus Lampau Dalam Rangkaian 33/11KV PPU Krubong. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Sugumari , Saranga Pani (2008) EPL Futsal Center Online System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Suhaimi, Aziz (2008) Fiber Optic Voice Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhana , Aris (2008) Imaging Concentration Profile Of Flowing Particle Using Holagen Lamp And Optical Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Sulaiman , Marizan (2008) BEKC 4683: Sistem Kawalan Digit. [Teaching Resource]

Sulaiman , Sabikan (2008) DEKP 2633: Litar Elektrik I. [Teaching Resource]

Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor and Kasim, Mohd Shahir and Md Fauadi, Muhammad Hafidz Fazli (2008) A Mobile Application Architecture for Measuring Shaft Misalignment. In: 1st International Conference on Plant Equipment and Reliability (ICPER), 27-28 Mar 2008, Selangor, Malaysia.

Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor and Sahib, Shahrin (2008) Vendor-Integrated Learning Model in ICT Education. Catalyst, 1. pp. 14-15.

Suriati, Akmal (2008) BMFG 1823: Statik Dan Kekuatan Bahan (Static & Strength Of Materials). [Teaching Resource]

Suzila Yanti , Sa'aidi (2008) Analysis Of Network design And Performance Of Teknion Furniture System Sdn Bhd Using Opnet Modeler 9.1. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafafwati Hanis , Mohd Jamaai (2008) Control Of A Cart-Ball System ; Comparison Between State Feedback Controller And Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafeeza, Ahmad Radzi (2008) BENC 1123: Algoritma Dan Struktur Data. [Teaching Resource]

Syahibudil Ikhwan, Abdul Kudus (2008) A Design Study To Research And Develop A 3-Wheeled Mobility Scooter For People With lower Limb Disability. Masters thesis, De Monfort University.

Syahida, Mohtar (2008) BITG 1113: Computer Programming. [Teaching Resource]

Syahirda, Samsudin (2008) Data Communication Through RF. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahril Anuar, Idris (2008) Vision Inspection System For Product Defect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahrul Hisham , Mohamad (2008) DEKM 3753: Mesin Elektrik. [Teaching Resource]

Syahrul Naim , Salleh (2008) Campus Election System (CESYS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Syamsul Baharin , Husain (2008) Infrared Distance/Height Measurement. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Syarifah Haafirah, Said Md Hassan (2008) E-Learning On Distributed Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarifah Mahani , Mohd Nazri (2008) A Study On 3D Modeling Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarina Azreen , Osman (2008) Kajian Tentang Nisbah Udara-Bahan Api Untuk Enjin Pembakaran Dalam Yang Menggunakan Bahan Api LPG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Abdul Hamid , Syed Mohamad Shazali and Sulaiman , Marizan and Said, Mohamed Azmi (2008) The Fuzzy Logic Approach for Modelling Object Physical Features and Holes Occupancies. In: 2nd Engineering Conference on Sustainable Engineering , 18 December 2008, Kuching, Sarawak.

Syed Anuar, Syed Muzzamil (2008) Rekabentuk Kombinasi Kerusi Keselamatan Kanak-Kanak Dengan Kerusi Kereta. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Hamzah, Syed Othman (2008) Quasi-Static Indentation Force On Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Hashim, Syed Moksin (2008) Study On The Strength And Mechanical Properties Of Bio-Composite Of Maize Stamp Fiber Sandwich Matrix With Resin/Polymer For Shield Ballistic Armor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Najib , Syed Salim and Ab Ghani, Mohd Ruddin (2008) BEKC 4683: Sistem Kawalan Digit. [Teaching Resource]

Syed Salim , Syed Najib and Che Amran, Aliza and Mohamad Saleh, Saleha and Md. Rozali, Sahazati (2008) BEKC 2543: Kejuruteraan Sistem Kawalan. [Teaching Resource]

sabikan, sulaiman and Syed Salim , Syed Najib and Sulaiman , Marizan and Miskon, Muhammad Fahmi (2008) Vision-Based Navigation Of An Autonomous Guided Vehicle For Tracking. In: National conference of Design and Concurrent Engineering, 28-29 Oktober 2008 , Universiti Teknikal Malaysia Melaka, . (Submitted)

T

TAY, CHOO CHUAN (2008) ASPHERICITY OF MIXED MONOID PRESENTATIONS BY USING GENERALIZED WEIGHT TEST METHOD. PhD thesis, Universiti Kebangsaan Malaysia.

Tahir, Zulkifli and M.A., Burhanuddin and Anton, S P (2008) Maintenance Decision Support System in Small and Medium Industries: An Approach to New Optimization Model. International Journal of Computer Science and Network Security , 8 (11). pp. 155-162. ISSN 1738-7906

Tahir, Zulkifli and M.A., Burhanuddin and Anton, S P and Haron, H. (2008) Maintenance Decision Support Fuzzy System in Small and Medium Industries Using Decision Making Grid. Maintenance Decision Support Fuzzy System in Small and Medium Industries using Decision Making Grid, 1 (1). pp. 680-684. ISSN 978-0-7695-3489-3/08

Tahir, Zulkifli and M.A., Burhanuddin and Anton, S P and Haron, Habibollah (2008) A Review of Optimization Models and Techniques for Maintenance Decision Support Systems in Small and Medium Industries. Electrical Engineering and Informatics Conference, 1 (1). pp. 153-158. ISSN 978-979-18765-0-6

Tajul Ariffin, Abdullah (2008) BMFR 4143: Rekabentuk Untuk Pembuatan & Pemasangan (Design For Manufacturing & Assemble). [Teaching Resource]

Tajul Ariffin , Tajuddin (2008) Programmable Water Jet Show In Aquarium Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Talib, Siti Norsyazwani (2008) Rekabentuk Dan Pelaksanaan Sistem Pengasingan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Jin Hong (2008) An Embedded Web Server- Based Remote Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kevin Chan Khoon (2008) Fabrication Of Polymer Composites For Use As Jigs And Racks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Poh Too (2008) Development Of A Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Soon Lam (2008) Design Improvement Of Wheel Spacer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Kim See (2008) BENE 2163: Sistem Elektronik. [Teaching Resource]

Tan , Kim See (2008) BENT 3133: Elektromagnetik. [Teaching Resource]

Tan , Yong Meng (2008) Wireless Data Communication (Fingerprint Images). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Say Joe (2008) BI-Pedal Walking Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, . and Shajahan, Maidin (2008) Design Improvement Of An Automotive Part Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, , (2008) BMFG 2813: Termo-Bendalir (Thermo Fluid). [Teaching Resource]

Taufik, , and Shajahan, Maidin and Sivarao, Subramonian (2008) DESIGN RULES OPTIMIZATION IN DESIGNING OF SHEET METAL PART. In: REACH'07, 18 - 20 January 2008, Kuala Lumpur.

Tay, Choo Chuan (2008) Kenirsferaan Bagi Persembahan Monoid Campuran Dengan Menggunakan Kaedah Ujian Pemberat Teritlak. PhD thesis, Universiti Kebangsaan Malaysia.

Tay, Choo Chuan and Ahmad, Abd Ghafur (2008) Aspherical Weight Test for Mixed Monoid Presentation. Journal of Institute of Mathematics & Computer Science, Kolkata, India, 21 (1). pp. 55-59.

Tay, Choo Chuan and Sakidin, Hamzah and Othman, Zuraini (2008) Solution Manual of Elementary Mathematics (module 8). Penerbit Universiti, UTeM, Malacca. ISBN 9789832948568

Tay, Choo Chuan and Sakidin, Hamzah and Ranom, Rahifa and Baharon, Mohd Rizuan and Jamaludin, Irma Wani (2008) Solution Manual of Engineering Mathematics (module 5). Penerbit Universiti, UTeM, Malacca. ISBN 9789832948322

Tay , Choo Chuan and Abd. Razak, Norazlina and A. Rahman, Norasra (2008) Solution Manual of Differential Equations. Penerbit Universiti, UTeM, Malacca. ISBN 9789832948285

Teng , Guat Theng (2008) Network And Controls Of Servomotors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Mohamad Hafiz, Tengku Hashim Badli (2008) Public Address System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Mohd Saalahuddin, Tengku Nordin (2008) Product Design Optimization Using Design For Manufacture And Assembly Approaches. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teoh, Wen Xin (2008) PID Controller For An Autonomous Parallel Self- Parking System Using Labview. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tey, Siew Hai (2008) Mecanum Wheels Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thanaletchumi , Mohan (2008) Wide Band Microstrip Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thoguluva Raghavan, Vijayaram (2008) BMFB 4223: Metalugi Gunaan (Applied Metallurgy). [Teaching Resource]

Thoguluva Raghavan, Vijayaram (2008) BMFS 3333: Proses Bukan Logam Non Metallic Processes). [Teaching Resource]

Thoguluva Raghavan, Vijayaram and Sivarao, Subramonian (2008) Surface Finish Investigation on Anchor-Shaped lead castings. Indian Foundry Journal, 54 (6). pp. 27-30. ISSN 0379-5446

Tong , Han Chern (2008) Random E-Question Generator For Midterm Examination : The Case Study For Data Structure Subject(REG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tshai, Chen Tong (2008) An Analysis On Facility Layout Using Systematic Layout Planning - Case Study In Lighting Manufacturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Amru Hasan, Tuan Yusof (2008) Kajian Kelakuan Lesu Dalam Bahan Berlogam Dengan Menggunakan Teknik NDT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Mohd Fakhruzzaman , Tuan Ismail (2008) Automated Timetable Scheduling System For Direct Entry Student. Project Report. UTeM, Melaka,Malaysia. (Submitted)

U

UTeM, - (2008) Pembinaan Bangunan Perpustakaan Universiti Teknikal Malaysia Melaka, 20 Jun 2008. [Image] (Submitted)

Umar , Abdul Hanan (2008) A Model Of Parking System By An Application Of Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

W Nurnadiah, W Mohd Puzi (2008) The Development Of Biology Courseware Titled "Inheritance And Variation" For SPM Level. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W. Mohd Zailimi , W. Abdullah (2008) BMCD 4563: Rekabentuk Berbantu Komputer. [Teaching Resource]

Wahjono, Sentot Imam (2008) Manajemen Tata Kelola Organisasi Bisnis. In: Manajemen Tata Kelola Organisasi Bisnis. Indeks, Jakarta, Indonesia, pp. 274-286. ISBN 8393429039

Wahyono Sapto, Widodo (2008) BMFR 3153: Analisis Kejuruteraan Berbantu Komputer (Computer Aided Engineering Design). [Teaching Resource]

Wan Ahmad Syakir, Wan Mohamad Kamil (2008) Development Of Magnetic Bearing System Model For Practical-Based Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Amiruddin, Wan Mustapha (2008) Pembangunan Prototaip Sistem Pengukuran Penggunaan Bahan Api Menggunakan Meter Aliran Tunggal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Hasrulnizzam, Wan Mahmood (2008) BMFP 3523: Pengurusan Kualiti (Quality Management). [Teaching Resource]

Wan Hasrulnizzam, Wan Mahmood (2008) BMFP 4563: Strategi Pembuatan (Manufacturing Strategy). [Teaching Resource]

Wan Mahmood, Wan Hasrulnizzam (2008) Industrial Application Tools and Techniques in Lean Manufacturing and Total Quality Management. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Wan Mahmood, Wan Hasrulnizzam (2008) Industrial Types of Manufacturing Complexity. In: Proceedings of the National Seminar on Engineering & Technopreneurship 2008. UniKL British Malaysian Institute, pp. 209-213. ISBN 978-983-44271-0-8

Wan Mahmood, Wan Hasrulnizzam and Abdullah, Ilyana (2008) Fuguai Mapping: The Useful Method For Problem Solving. In: Prosiding Seminar Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008. Penerbit Universiti, Universiti Teknikal Malaysia Melaka, pp. 97-106. ISBN 978-983-2948-33-9

Wan Mahmood, Wan Hasrulnizzam and Ali, Abdul Majid (2008) Autonomous Maintenance for Milling Machine. In: National Conference on Design and Concurrent Engineering (DECON) 2008 , 28 - 29 October 2008, Melaka, Malaysia..

Wan Mahmood, Wan Hasrulnizzam and Ebrahim, Zuhriah and Mohamad, Effendi (2008) Development of an Office TPM for Lecturer’s Room. In: National Management Conference 2008 (NAMAC 08), 13-14, December 2008, Kuala Terengganu, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Mahmood, Ab Rahman and Abdullah, Ilyana (2008) Autonomous Maintenance Program For Job Base In Technical University. In: International Conference on the Roles of the Humanities and Social Sciences in Engineering 2008 (ICoHSE 2008), 5-6, December 2008, Kuala Lumpur, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Mohamad, Effendi and Abdullah, Abd Rahman (2008) Enhancement of an Effective Training in Manufacturing Company. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Mohamed, Norhafiza (2008) The Effectiveness of Electronic Scheduling Template: Case Study on Composite Based Product’s Company. In: International Conference on Science and: Application s in Industry and Education ( ICSTIE 2008), 12-13, December 2008, Penang, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Muhamad, Mohd Razali (2008) Industrial Application Of Lean Manufacturing. In: Proceedings of the National Seminar on Science, Technology and Social Sciences 2008. Universiti Teknologi MARA, pp. 243-250. ISBN 978-983-2607-17-5

Wan Mazuwan , Wan Azhal (2008) Fabrication And Characterization Of Oil Palm Shell Powder Filled Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Asyraf, Wan Zakaria (2008) Carburizing Effect On Impact Toughness Of Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Azhar , W Mustafa (2008) Detector System For Sleepy Driver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Fadhli, Wan Adnan (2008) Redesign Of A Hand Pallet Truck For Manufacturing Industry Using Integration Of Ergonomics Analysis And Quality Function Deployment (QFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Salihin, Wan Mustafa (2008) Smart Bottle Packing System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wan Mohd Zaim, Wan Salleh (2008) Broadband Planar Antena Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Zhafran , Wan Zulkiffeli (2008) Kajian Tentang Komposisi Seramik Berasaskan Campuran Alumina Di Dalam Penggunaan Sebagai Penapis Air Akuarium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Noor Haswana, Wan Ibrahim (2008) Agriculture Training Information System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wan Nor Izham , Wan Nashar (2008) Fabrication Of Dry Painting Booth For Makmal Prototaip Dan Inovasi, Jabatan Reka Bentuk Dan Inovasi, Fakulti Kejuruteraan Mekanikal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norhafizan , Wan Rohizan (2008) Rotorblade Aerodynamic Performance Evaluation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norsarina , Wan Hassan (2008) Computer Aided Education On Photovoltaic Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nurulhuda , Selipol Bahari (2008) Automatic Temperature Controlled Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Rohani, Wan Ibrahim (2008) Development Of Prototype For Interactive Web In Learning Multimedia System (Using PBL Approach). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wasli, Chairulsyah (2008) BENT 3213: Sistem Perhubungan. [Teaching Resource]

Wasli, Chairulsyah (2008) DENT 2543: Prinsip Perhubungan. [Teaching Resource]

White, Neil and Harris, Nick and Kok, Swee Leong and Tudor, John (2008) Novel Thick-Film Piezoceramic Micro-Generator Based on Free-Standing Structures. In: 2nd Electronics System-Integration Technology, 1 - 4 September 2008, Greenwich, London..

Wong, Wei Liang (2008) Assessment On Material Handling Activities In Manufacturing Factory For Occupational Health Improvement - Case Study In Green Food Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yu Wah (2008) Design And Development Of Prototyping High Pressure And High Temperature Steam Cleaning Jet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Jiun Yet (2008) An Experimental Study On Building Vibration At Industrial Campus (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Peng Liang (2008) The Adoption And The Implementation Of Best Practice In Malaysia Biotech Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Calvin Tze Wei (2008) Transmission Of Voice Signal Using Square Wave Frequency Modulation. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong , Yan Chiew (2008) DENG 2223: Asas Elektronik & Mikropemproses. [Teaching Resource]

Y

Yamani Nair , Thamutharam (2008) Web Based FTP System Using Open Source Platform (WFSOSP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Yang, Kok Wei (2008) An Experimental Study On The Propagation Of Vibration And Comparison Of Damping In A Steel Support Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yee, Yit Tong (2008) Design And Develop An Embedded Controller For Multi-Purpose Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong Thau Foong, Stanley (2008) Measurement Of Thermal Comfort At Classroom: A Case Study In UTeM. Masters thesis, UTeM.

Yosza, Dasril (2008) DACS 1212: Matematik Asas. [Teaching Resource]

Yuhazri, Yaakob (2008) BMFB 3273 / BMFB 4233: Komposit Dan Bahan Termaju (Composite And Advanced Materials). [Teaching Resource]

Yusmalina, Yusoff (2008) Kecekapan Dan Kehilangan Haba Ekzos Enjin Diesel 2 Liter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusmarnita, Yusop (2008) BENE 3153: Elektronik Kuasa. [Teaching Resource]

Yusmarnita, Yusop and Ahmad Sadhiqin, Mohd Isira (2008) BENE 4143: Pembuatan Automatik. [Teaching Resource]

Yusmawani, Mohd Yusoff (2008) Mobile Malaysian History Notes Using Mind Map, Mental Story And Minemonic : Kerajaan-Kerajaan Melayu Baru. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusof, R. and Selamat, S. R. and Sahib, S. (2008) Intrusion Alert Correlation Technique Analysis for Heterogeneous Log. International Journal of Computer Science and Network Security , 8 (9). pp. 132-138. ISSN 1738-7906

Yusof, R. and Selamat, S. R. and Sahib, S. and Abdollah, M. F. (2008) ALERT CORRELATION TECHNIQUE ANALYSIS FOR DIVERSE LOG. Journal of Advanced Manufacturing Technology, 2 (2). pp. 65-76. ISSN 1985-3157 July-December 2008

Yuvarajan , Dorairaj (2008) Teh Tarik Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zafirah , Salim (2008) Video Conference System For Classroom Teaching. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zahariah, Manap (2008) BENP 2183: Instrumentasi Elektronik. [Teaching Resource]

Zaihasraf , Zakaria and Md Noah , Jamal and Khamis, Aziah (2008) BEKU 2233: Litar Elektrik II. [Teaching Resource]

Zainal Fitri, Mohd Zolkifli (2008) Mobile Academic Building Map For Classrooms And Offices Locations At Academic Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainordin Zhafran, Zulkefli (2008) Determination Of Sound Transmission Class (STC) For Lecture Rooms In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainuddin, Intan Shafinaz (2008) Rekabentuk Tali Pinggang Kereta Untuk Ibu Mengandung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainudin, Zulkarnain (2008) BENE 4133: Pemacu Elektrik. [Teaching Resource]

Zainudin, Zulkarnain (2008) BENE 4173: Teknologi Kuasa. [Teaching Resource]

Zairulazha, Zainal (2008) BMCM 3733: Kejuruteraan Kawalan. [Teaching Resource]

Zakaria, Shahrudin and Khamis, Noorli and Abd. Razak, Norazlina and Sabikan, Sulaiman and Mohamed, Azizan and Karpayah, Puvendran (2008) Omni Directional Indoor Mobile Robot. In: DECON 2008 - National Conference of Design and Concurrent Engineering, 28-29 October 2008, Universiti Teknikal Malaysia Melaka. (Submitted)

Zakiah , Abd Halim (2008) BMCB 4443: Analisis Kegagalan Tidak Musnah. [Teaching Resource]

Zaleha , Ridzwan (2008) Pengesan Kanak-Kanak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zalilawati, Ghazali (2008) Laundry Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamani , Mekan (2008) Design And Embedded Controller (Swimming Pool Pump Timer). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zamre, Abd Ghani (2008) DENE 3363: Automasi Industri. [Teaching Resource]

Zamri, Ahmad (2008) Design And Development Of Smart Storage System For Clothes Drying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Ruzaidi (2008) BMFG 4812: Jurutera Dalam Masyarakat (Engineer In Society). [Teaching Resource]

Zamzarina , Malek (2008) Ergonomic School Bag For Kids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zanariah , Jano (2008) Implementing weblogs in technical communication classroom. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zarita, Mohd Kosnin (2008) DITP 1123: Pengaturcaraan 2. [Teaching Resource]

Zarith Sufiah , Mustafa (2008) Kajian Sains Kuantitatif (Statistik, Matematik, Dan Penyelidikan Operasi) Dalam Pengurusan Makmal Di Fakulti Kejuruteraan Pembuatan. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zarizal, Eddy (2008) A Model Of Traffic Light System By The Application Of PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zarry, Mohamad (2008) Study On The Strength And Mechanical Properties Of Biocomposite Of Palm Fibers Sandwich Matrix With ABS Thermoplastic For Ballistic Armor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zeratul Izzah, Mohd Yusoh (2008) BITI 2113: Pengaturcaraan Logik. [Teaching Resource]

Zolkarnain, Marjom (2008) DMFD 2823: Statik & Dinamik (Statics & Dynamics). [Teaching Resource]

Zolkepli, Buang and Syed Najmuddin , Syed Hassan and Mohd Fauzi, Kamaruddin and Ismail , Ibrahim and Muliati, Sedek (2008) Penerapan Kemahiran Insaniah Dalam Proses Pengajaran Dan Pembelajaran Dikalangan Pelajar Di Utem. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulfikar , Abd Kasim (2008) Photovoltaic System Calculation Program. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhairi, Othman (2008) BENE 4113: Robotik Industri. [Teaching Resource]

Zulhairi, Othman (2008) BENE 4123: Pneumatik Industri. [Teaching Resource]

Zulita , Zainudin (2008) E-Learning Courseware For Down Syndrome. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zulkefle, Ahmad Aizan (2008) BEKC 2433: Isyarat Dan Sistem. [Teaching Resource]

Zulkefle, Ahmad Aizan (2008) DEKC 3813: Kejuruteraan Sistem Kawalan. [Teaching Resource]

Zulkiflee, Muslim (2008) BITS 2313: Rangkaian Komputer Setempat. [Teaching Resource]

Zulkifli , Musa (2008) Merekabentuk Dan Membangunkan Sistem Kawalan Kelajuan Bagi Motor Arus Teras Bermagnet Kekal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuraidah , Mohd Pahmi (2008) Design And Implementation Of A USB-Based Data Acquisition System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zuriati , Mohd Khairuddin (2008) Design, Fabrication And Measurement Of Interdigital Microwave Filters. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zurina, Sa'aya (2008) BITS 1213: Sistem Pengoperasian. [Teaching Resource]

Zurina, Shamsudin (2008) BMFB 3243: Kejuruteraan Polimer (Polymer Engineering). [Teaching Resource]

Zurina , Ahmad (2008) E-Residence Information System For UiTM. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zurina , Saaya and Anusuriya , Devaraju and Nuridawati, Mustafa (2008) The Development Of Questionnaire Builder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuwairi Amin , Md Hata (2008) Steering System Design And Analysis Of Formula Varsity Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Thu Dec 14 21:38:18 2017 MYT.