Items where Division is "Library > Tesis > FKP" and Year is 2019

A

Abd Ghani, Mohamad Hanifah (2019) Investigation Of Cellulose Fiber From Banana Waste By Chemical Treatment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Mohd Aidil Shah (2019) Characterization and Parametric Evaluation of Wire Electrical Discharge Machining of Cold Work Tool Steels. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Mohd Isa (2019) Optimization Of Drilling Parameter For Carbon Fiber Reinforced Polymer CFRP Material Using RSM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Abd Halimnizam (2019) Surface Roughness Study On Mild Steel In Conventional Turning Process Under Three Condition Cutting Fluids. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Muhammad Faizal (2019) Tribology Characteristics Of 22MNB5 Boron Steel Coated With Titanium Aluminum Nitrade. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Noor Farah Iddayu (2019) Synthesis Of Hematite/Mwcnts Nanocomposite Through Thermal Oxidation And Spin Coating. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ademola, Adebayo Babatope (2019) Accelerated Weathering Of Rubberwood Reinforced Recycled Polypropylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aji, Azman Hafiidz (2019) Development Of Smartphone Application To Improve Facility Management System In Johor Bahru Sentral. Masters thesis, Universiti Teknikal Malaysia Melaka.

Albawab,, Tarek Mhd Moataz (2019) Automated Postural Angle Classification Using Microsoft Kinect For Ergonomics Assessment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali Al-Baiti, Mohammed Hasan (2019) Influence Of Machining Parameters On Surface Roughness And Quality Of Hole In Drilling Of CFRP Composites With Ultrasonic Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alkhanbashi, Maged Abdullah Ahmed (2019) Improvement Of Self Alignment Footing System For Motor-Pump Rotating Shaft. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arif, Afraha Baiti (2019) Electromagnetic Wave Absorption Efficiency Of Green Superhydrophobic Magnetic Nanocomposite Sheet From Durian Shell. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Azani, Noorhaslina (2019) Performance Of EDM Die - Sinking Parameters On Material Characteristics Of LM6 Using Graphite Electrode. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhar, Anis Afuza (2019) Surface Integrity And Tool Wear Of Hardened HTCS-150 Steel (52 HRC) In Milling With Tia1n Coated Carbide. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhar, Jumardi (2019) Investigation To Reduce Material Reject In Production Line At Besi ACM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Mohd Azreen (2019) Thermal Optimization Of Ice Cream Making Process : Comparison Between R134A And R404A Refrigerants. Masters thesis, Universiti Teknikal Malaysia Melaka.

B

Balakrishnan, Paramananthan (2019) Investigation of natural hybrid sandwich panel and thin skin cover towards acoustical performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Boejang, Hambali (2019) Concurrent Product Development Process, Project, And Performance Of Malaysian Car Manufacturer. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Bong, Cheng Siong (2019) New Hybrid Quick Response Manufacturing Framework To Improve Delivery Performance At Engineer-To-Order Company. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

C

Che Ku Junoh, Sahida (2019) NPID Double Hyperbolic Controller For Improving Tracking Performance Of XY Table Ballscrew Drive System. Masters thesis, Universiti Teknikal Malaysia Melaka.

D

Dahlan, Mohd Shazwan (2019) Surface roughness study on aluminium in high speed turning process. Masters thesis, Universiti Teknikal Malaysia Melaka.

F

Fam, Tony Chee Hoe (2019) Static Coldcure Vulcanization On Embossed Rubber Cotsheets Using Chambers. Masters thesis, Universiti Teknikal Malaysia Melaka.

H

Harun, Nurul Hatiqah (2019) Parameter Optimization Of Fused Deposition Modelling Under Ambient Temperature Control. Masters thesis, Universiti Teknikal Malaysia Melaka.

I

Ibrahim, Jamadeel Izwan (2019) Proposal Of Effective Maintenance Plan For Enhancing Overall Equipment Effectiveness At Palm Oil Mill. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Muhammad Najib (2019) The Effect Of Surface Roughness On Tensile Strength Of Fiberglass Reinforced Polymer Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ilias, Mohammad Nazriq (2019) Study On Ergonomic Of Working Posture And Workstation Design In Meyer Burger Factory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ishak, Norfatiha (2019) The Preparation And Characterization Of Polyhydroxybutyrate-Co-Valerate Tricalcium Phosphate Scaffolds For Bone Tissue Engineering. Masters thesis, Universiti Teknikal Malaysia Melaka.

J

Jansar, Muhammad Faiz (2019) Utilization Of Industrial Waste Derived Ashes As Filler In Acrylonitrile-Butadiene-Styrene Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jiga, Elnie Carina (2019) Measuring Overall Equipment Effectiveness Of Pressure Die Casting Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jonid, Izyan Dayana (2019) Electrical Discharge Machining Of Titanium Alloy (Ti-6al-4v) Using Various Types Of Electrodes. Masters thesis, Universiti Teknikal Malaysia Melaka.

K

Kamaludin, Khairun Najmi (2019) Spare Part Management Using Economic Order Quantity Model With Fuzzy-Analytical Hierarchy Process (Fuzzy-AHP) Optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamarudin, Najwa (2019) Preparation And Characterization Of Silicone Rubber Composites Filled Waste Mineral Fillers For High Voltage Insulation Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

L

Lee, Soon Fui (2019) 5s Implementation In Warehouse For Manufacture Of Plastic Bottles Factory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Victor Abraham Su Kang (2019) Design Of A Control System For A Reconfigurable Conveyor System Using PLC. Masters thesis, Universiti Teknikal Malaysia Melaka.

M

Manaf, Norshahidah (2019) Multi Objective Performances Optimization Of Poly-Ether-Ether-Ketone (PEEK) Material By Using Rotary Ultrasonic Assisted Drilling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mansoor, Mohd Sufriansyah (2019) Effect Of Lathe Machining Parameters On Machining Characteristics Towards Mild Steel (AISI 1020) Using RSM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mastuki, Ammar Aizat (2019) Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Daud, Mohd Faiz (2019) Feasibility Study On Supply Chain Management For MRO Industry In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Noor, Noraina Alia (2019) Preparation And Characterisation Of Epoxy/Kenaf/Mwcnts Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Seman., Norhidayah (2019) Integration Of G-Code With Position Controller Via Interpreter Design Using MATLAB For Milling Machine Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Shariff, Mohd Rezykin (2019) Design Of Mobile Robot In Agriculture, Development And Analysis Of Mobile Robot Body Frame Structure Against Applied Load. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md. Latiff, Aniza (2019) Moisture, Clay And Additive Effect In Aluminum Strength And Surfaces Roughness Using Sand Casting. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Azlinda (2019) Development And Evaluation Of Customized Pes Planus Orthotic Insole Using Additive Manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Nor Rizan (2019) A Conceptual Framework Of Reconfigurable Conveyor System To Support Changeability In Manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Siti Nurul Hazlina (2019) Process Capabilitiy Of Tin Plating Inspection : A Case Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Azmi, Helmi Affendi (2019) Development Of Simultaneous Twin Cutter For Machining Thin-Wall Component. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Ishak, Nurul Naili (2019) Microstructural Characterization And Mechanical Properties Of Al-Si-Cu Alloys Processed By Equal Channel Angular Pressing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Noor, Mohamad Noor Azran (2019) Tribology And Electrochemical Behavior Of Electroless Quaternary Nickel Alloy Deposition For Cutting Tools. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Tar, Amira Farhana (2019) Integration Of Analytical Network Process And Theory Of Inventive Problem Solving For Wheelchair Conceptual Design Selection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed Muslem, Mohammed Bakar (2019) Experimental Studies On Effect Of Process Parameters On Tool Wear In Drilling CFRP Composites With Ultrasonic Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fauzi, Norshahira (2019) The Impact Of Bobbin Friction Stir Welding Fixture On The Weld Development. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Hashim, Nurul Nasreen (2019) Enhancing The Effectiveness Of Quality Control System Using Lean Six Sigma Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rizal, Haziq Rifaie (2019) Thinking Production System To Increase Productivity In Assembly Line. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Saffar, Seha (2019) Design And Simulation Of Automated Material Handling System For Automotive Assembly Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sulaiman Shah, Faiznur Izzati (2019) Process-Properties Effect On Copper Alloy After Investment Casting Using ABS Material As Pattern. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sulaiman Shah, Faiznur Izzati (2019) Process-Properties Effect On Copper Alloy After Investment Casting Using Abs Material As Pattern. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zafri, Mazatul Nadia (2019) Chemically Modified Graphene Nanoplatelets-Thermoset Adhesive Through Ultrasonication Assisted Mixing For Natural Rubber Aluminium Bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd. Wazir, Mohd. Firdaus (2019) Design improvement of a race car chassis for Educational Innovation In Motorsport And Automotive Racing (EIMARace) event. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mousa Algalos, Muthanna Ali (2019) Risk Management Of Yemen’s Beverage Manufacturing Industry Through Hazard Operability Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhamad, Faizal (2019) The Effect Of Temperature And Filament Colour In 3D Printer To The Mechanical Strength And Impact Behaviour Of The Product. Masters thesis, Universiti Teknikal Malaysia Melaka.

N

Nazir Ali, Mohamad Rasyidi (2019) Refurbishment Of Plating Machine Unloader 304 Stainless Steel Track By DMAIC Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

O

Osman, Edynoor (2019) New Hybrid Kenaf Fibre/Epoxy Reinforced Aluminium Laminate Composite For Structural Application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

R

Raja Seman, Raja Noor Amalina (2019) Preparation Of Graphene/Molybdenum Disulfide Based Electrodes And Its Electrochemical Performance In Supercapacitors. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rusli, Nur Syamimi (2019) Study On Processing Parameters For Polypropylene Reinforced With Fiber Glass Composite Prepared Using Injection Molding. Masters thesis, Universiti Teknikal Malaysia Melaka.

S

Santuso, Kamarulzaman (2019) Design Of Portable Oil Spill Skimmer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shafiq Aripin, Muhammad Wazir (2019) Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing). Masters thesis, Universiti Teknikal Malaysia Melaka.

Shah Fenner Khan, Nurdiyanah Nasuha (2019) Optimization Of Assembly Line Using Discrete Event Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suhaimi, Muhamad Syirazi (2019) Investigation Of Mechanical Properties On Cement Paste Filled With Palm Oil Fuel Ash (POFA). Masters thesis, Universiti Teknikal Malaysia Melaka.

Sulaiman, Muhammad Hidayat (2019) Optimization Of Injection Moulding Parameters Using Moldflow Simulation Software Analyze By Response Surface Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Syed Mohamed, Sharifah Syahira (2019) Measuring Awareness, Readiness And Effectiveness Of Quality Ecosystem At Institut Kemahiran Mara. Masters thesis, Universiti Teknikal Malaysia Melaka.

V

V. Nanjan, Davandran (2019) Implementation of overall equipment effectiveness in surface mounting technology. Masters thesis, Universiti Teknikal Malaysia Melaka.

W

Wan Md Hatta, Wan Nur 'Izzati (2019) Development Of Automated Coolant Supply (ACS) System In Improving Cutting Performance For CNC Milling Machining. Masters thesis, Universiti Teknikal Malaysia Melaka.

Y

Yomli, Sofia Mulyani (2019) Optimization Of Welding Parameters On Mechanical Properties Of Aluminium Alloy 7075. Masters thesis, Universiti Teknikal Malaysia Melaka.

Z

Zainal, Muhammad Syarifuddin (2019) Road Damage Issues - The Effectiveness Of Volunteer Involvement In Assisting The Authorities. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal Abdin, Mohamad Faisal (2019) Design Of Mechanical Device For Stroke Syndrome After Rehabilitation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainol, Syukran (2019) Integrated Analytical Hierarchy Process (AHP) And Design For Manufacture And Assembly (DFMA) In Concept Generation Of Portable Material Pouring Mechanism. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainul Hashimi, Faridah (2019) Reducing Void During Transfer Moulding Of Semiconductor Plastic Package Using. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkifli, Muhammad Winal Zikril (2019) Human-Robot Interaction With Animal Robot PARO For Patients With Depression. Masters thesis, Universiti Teknikal Malaysia Melaka.