Items where Subject is "T Technology > TL Motor vehicles. Aeronautics. Astronautics"

Article

Hannan, MA and Azidin, FA and Mohamed, Azah (2012) Multi-sources model and control algorithm of an energy management system. Energy Conversion and Management. pp. 123-130. ISSN 0196-8904

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2013) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), 1 (1). pp. 75-77. ISSN 2320 –4060

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Tamaldin, Noreffendy and Thanaraj, Krishnan (2013) Development of Formula Varsity Race Car Chassis. IOP Conf. Series: Materials Science and Engineering, 50 (012001). pp. 1-11. ISSN 1757-899X

ABDULLAH, Mohd Azman and Tamaldin, Noreffendy and Rusnandi, Herdy and Manoharan, Tayalan and Samsir, Muhammad Afiq (2013) Development and Modification of a Single Overhead Camshaft 4-Valve 4-Stroke 135 cc Formula Varsity Race Car Engine. IOP SCIENCE IOP Conf.Series:MaterialsScienceandEngineering, 50. pp. 1-7. ISSN 1757-899X

ABDULLAH, Mohd Azman and MICHITSUJI, Yohei and Takehara, Shoichiro and NAGAI, Masao and Miyajima, Naoki (2010) SWING-UP CONTROL OF MASS BODY INTERLINKED FLEXIBLE TETHER. T H E A R C H I V E O F M E C H A N I C A L E N G I N E E R I N G. pp. 115-131. ISSN 2300-1985

Abdul Kadir, Faizul Akmar and Hudha, Khisbullah and Sabino, Ubaidillah (2011) Modelling,Characterisation And Force Tracking Control Of A Magnetorheological Damper Under Harmonic Excitation. International Journal Of Modelling, Identification And Control (Ijmic), 13 (1-2). pp. 9-21. ISSN 1746-6172

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and ABDULLAH, Mohd Azman and HUDHA, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID with Experimental Throttle-in-the-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and Abdullah, Mohd Azman and Hudha, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID With Experimental Throttle-In-The-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdul Kadir, Faizul Akmar and Hudha, Khisbullah and Mohammad Nasir, Mohd Zakaria (2012) Vehicle Speed Control Using Gain Scheduling PID Controller. Applied Mechanics And Materials, 165. pp. 170-174. ISSN 1662-7482

Abdul Kadir, Faizul Akmar and Mohammad Nasir, Mohd Zakaria and Hudha , Khisbullah and Amir, Mohd Zubir (2012) Modelling,Simulation And Validation Of 9 DOF Vehicles Model For Automatic Steering System. Applied Mechanics And Materials, 165. pp. 192-196. ISSN 1662-7482

Abdul Karim, Kasrul and Othman, Md Nazri and Wan Hassan, Wan Ahmas Redhauddin and Bugis, Mohd Ismadi and Ramli, Mohd Zulkifli and Abdullah, Abdul Rahim and Jidin , Auzani (2014) Electric Vehicle Development And Prediction Of Battery Consumption Based On A Journey Profile. Applied Mechanics and Materials, 699. pp. 794-799. ISSN 1660-9336

Abdul Manaf, Muhammad Zaidan and Fakeruddin, Shafarul Hafidi and Mohamad Shukri , Zakaria and Mohd Noor Asril, Saadun and Mohd Hafidzal, Mohd Hanafi (2014) Mini acceleration and deceleration driving strategy to increase the operational time of flywheel hybrid module. Proceedings of International Conference on Mathematics, Engineering & Industrial Applications 2014 (ICOMEIA 2014). pp. 287-292. ISSN 2289-1323 (In Press)

Abdul Manaf, Muhammad Zaidan and Nik Mohamed, Nik Abdullah and Zakaria, Mohamad Shukri and Saadun, Mohd Noor Asril and Mohd Hanafi, Mohd Hafidzal (2013) Modeling of Flywheel Hybrid Powertrain to Optimize Energy Consumption in Mechanical Hybrid Motorcycle. Applied Mechanics and Materials, Volume. pp. 287-292. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV). Applied Mechanics and Materials, 660. pp. 753-757. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV). Applied Mechanics and Materials, 663 (-). pp. 517-521. ISSN 1660-9336

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2017) Fatigue Damage Simulation Of Automobile Steering Knuckle Subjected To Variable Amplitude Loading. International Journal Of Techology And Engineering Studies, 3 (6). pp. 245-252. ISSN 2415-0924

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2018) Stress analysis of automobile steering knuckle using finite element method. International Journal Of Engineering & Technology, 7 (317). pp. 28-30. ISSN 2227-524X

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser. Industrial Lubrication And Tribology, 69 (3). pp. 409-413. ISSN 0036-8792

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2018) Investigation Of The Pressure Ratio And Efficiency Of A Turbocharger Centrifugal Compressor With A Vaned Diffuser. World Review Of Science, Technology And Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Mansor, Mohd Radzi and Abdollah, Mohd Fadzli (2017) Experimental Investigation Of Performance And Emissions Of A Stratified Charge CNG Direct Injection Engine With Turbocharger. MATEC Web Of Conferences, 124 (07004). pp. 1-5. ISSN 2261-236X

Azidin, Farid Arafat and Hannan, Mahammad Abdul and Mohamed, Azah (2013) Renewable Energy Technologies and Hybrid Electric Vehicle Challenges. PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), 89 (8). pp. 150-156. ISSN 0033-2097

Azidin, Farid Arafat and Hannan, Mahammad Abdul and Mohamed, Azah (2013) An Energy Management of Light Electric Vehicle. An Energy Management of Light Electric Vehicle, 2 (2). pp. 271-276. ISSN 2315-4462

Azma, Putra and Wong, Hee Kiong and Nawal Aswan, Abdul Jalil (2014) Measurement Of Structure-Borne Noise From Road Input In A Motor Vehicle Cabin. Asean Engineering Journal, 4 (2). pp. 29-41. ISSN 2229-127X

De Lillo, Liliana and Empringham, Lee and Wheeler, Patrick W. and Khwan-on, Sudarat and Gerada, Christopher and Othman, Md Nazri and Huang, Xiaoyan (2010) Multiphase power converter drive for fault-tolerant machine development in aerospace applications. IEEE Transactions on Industrial Electronics, 57 (2). pp. 575-583. ISSN 0278-0046

Dhar Malingam, Sivakumar and Mohd Amman, Rosmia and Samekto, Haryanti and Mohd Ab Halim, Mohd Firdaus and Abu Shah, Ismail and Sulaiman, Saiful Naim and Subramonian, Sivarao (2018) Influences of draw forming process on the crash analysis of a circular cup. Journal of Advanced Manufacturing Technology (JAMT), 12 (1(2)). pp. 547-559. ISSN 1985-3157

Engku Mohamed, Engku Ahmad Azrulhisham and Yusuff, Mohd Asri and Abd Wahab, Dzuraidah and Nik Abdullah, Nik Mohamad Amin and Abdullah, Shahrum and Che Haron, Che Hassan (2010) Evaluation of fatigue life reliability of steering knuckle using pearson parametric distribution model. International Journal of Quality, Statistics, and Reliability, 2010. pp. 1-8. ISSN 1687-7152

Hannan, MA and Azidin, FA and Mohamed, Azah (2014) Hybrid electricvehiclesandtheirchallenges:Areview. Renewableand Sustainable Energy Reviews. pp. 135-150. ISSN 0033-2097

Hannan, MA and Azidin, FA and Mohamed, A (2012) Light Vehicle Energy Management System using Multi-Power Sources. PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), 88 (3b). pp. 197-204. ISSN 0033-2097

Harun, Mohamad Hafiz and Zahmani, Qamar Fairuz and Hudha, Khisbullah and Sariman, Mohd Zahar and Harun, Mohd Hanif and Ahmad, Fauzi and Azhari, Muhamad Azwar (2017) Stability Enhancement Of Railway Vehicle Dynamics Performance In Lateral Direction Using Fuzzy Bogie-Based Skyhook Control. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4219-4224. ISSN 1819-6608

Harun, Mohd Hanif and W Abdullah, Wan M Zailimi and Jamaluddin, Hishamuddin and Ab Rahman, Roslan and Hudha, Khisbullah and Harun, Mohamad Hafiz (2014) Study The Potential Application Of Smart Fluid Material And Force Tracking Control Of Magnetorheological Damper. Applied Mechanics And Materials, 699. pp. 348-353. ISSN 1662-7482

Hassan, Muhammad Zahir and Abdul Kudus, Syahibudil Ikhwan and Halid, Mohd Shazni and Abdul Manaf, Muhammad Zaidan (2013) Stability Analysis for Buoyancy UTeM’s Amphibious Hybrid Vehicle (AHV). International Journal of Mechanical Engineering applications Research – IJMEAR, 4 (E090). pp. 296-302. ISSN 2249- 6564

Hassan, Muhammad Zahir and Abdul Manaf, Muhammad Zaidan and Halid, Mohd Shazni and Alehan, Muhammad Nadzeer and Md Isa, Amjad Saddar (2013) UTeM`s Amphibious Hybrid Vehicle: Ride and Handling Analysis. Applied Mechanics and Materials, 393. pp. 354-359. ISSN 1662-7482

Hassan, Muhammad Zahir and Md Isa, Amjad Saddar and Abdul Kudus, Syahibudil Ikhwan and Abdul Manaf, Muhammad Zaidan (2013) UTeM`s Amphibious Hybrid Vehicle: Development of Hybrid Electric Propulsion System. International Review of Mechanical Engineering, 7 (5). pp. 790-794. ISSN 1970-8734

Hassan, Muhammad Zahir and Razali, Muhammad Razil and Halid, Mohd Shazni (2013) Design and Development of Amphibious Hybrid Vehicle Body Structure. International Journal of Science and Research (IJSR). pp. 220-223. ISSN 2319-7064

Hassan, Muhammad Zahir and Zainal Ariffin, Haziq Irfan (2013) Development of Vehicle Blind Spot System for Passenger Car. Applied Mechanics and Materials, 393. pp. 350-353. ISSN 1662-7482

Hassan, Muhammad Zahir (2013) The evaluation of disc brake squeal propensity through a fully coupled transient thermomechanical model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (3). pp. 361-375. ISSN 0954-4070

Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Salim, Mohd Azli (2015) Design of Chassis Frame for All-Terrain Vehicle for Educational Purposes. Applied Mechanics and Materials , 695. pp. 742-745. ISSN 1662-7482

Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Salim, Mohd Azli (2015) Finite Element Analysis on Brake Disc of an Educational All-Terrain-Vehicle. Applied Mechanics and Materials , 695. pp. 535-538. ISSN 1662-7482

Hassan, Muhammad Zahir and Ahmad, Fauzi and Aparow, Vimal Rau and HUDHA, Khisbullah (2013) Identification of Intelligent Controls in Developing Antilock Braking System. Journal of Advanced Manufacturing Technology, 7 (1). pp. 1-13. ISSN 1985-3157

Hassan, Muhammad Zahir and Alehan, Muhammad Nadzeer and Md Isa, Muhammad Fahmi and Abdul Manaf, Muhammad Zaidan (2013) Design, Analysis and Fabrication of Space Frame Chassis for Amphibious Hybrid Vehicle. International Journal of Engineering Sciences Research-IJESR. pp. 864-866. ISSN 2230-8504

Hassan, Muhammad Zahir and Brooks, Peter C. and Barton, David C. (2008) Thermo-mechanical contact analysis of car disc brake squeal. SAE International Journal Passenger Cars – Mechanical System, 1 (1). pp. 1230-1239. ISSN 1946-3995

Hassan, Muhammad Zahir and Brooks, Peter C. and Barton, David C. (2009) A predictive tool to evaluate disk brake squeal using a fully coupled thermo-mechanical finite element model. International Journal Vehicle Design, 51 (1-2). pp. 124-142. ISSN 1741-5314

Hassan, Muhammad Zahir and Brosks, Peter C. and Barton, David C. (2013) 采用全联热-机械有限元模型计算盘式制动器尖叫声的预测工具 (A Predictive Tool to Evaluate Disk Brake Squeal Using A Fully Coupled Thermo--Mechanical Finite Element Model). Drive System Technique (传动技术), 27 (3). pp. 39-48. ISSN 1006-8244

Hassan, Muhammad Zahir and Magaswaran, K. and Phuman Singh, A.S. (2014) A NEW METHOD IN THE IDENTIFICATION OF NOISE AND VIBRATION CHARACTERISTICS OF AUTOMOTIVE DISK BRAKES IN THE LOW FREQUENCY DOMAIN. International Journal of Automotive and Mechanical Engineering (IJAME), 9 (Januar). pp. 1554-1577. ISSN 2180-1606

Hassan, Muhammad Zahir and Md Isa, Muhammad Fahmi and Razali, Muhammad Razil and Abdul Manaf, Muhammad Zaidan (2013) Structure Analysis of Cast Iron for Dry Clutch of Amphibious Vehicle. International Journal of Engineering Trends and Technology (IJETT), 4 (5). pp. 1768-1771. ISSN 2231-5381

Ibrahim, Zulkifilie and Mohd Yaakop, Nurazlin and Sulaiman , Marizan and Mat Lazi, Jurifa and Abu Hasim, Ahmad Shukri and Patakor, Fizatul Aini (2012) Electric Differential With Svpwm Direct Torque Control Using Five-Leg Inverter For Electric Vehicles. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 599-609. ISSN 1992-8645

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole (2011) A hybrid DTC-DSC drive for high performance induction motor control. Journal of Power Electronics, 11 (5). pp. 704-712. ISSN 15982092

Jidin, Aiman Zakwan and Lim, Siau Li and Kadmin, Ahmad Fauzan (2017) Implementation Of Algorithm For Vehicle Anti-Collision Alert System In FPGA. International Journal of Electrical and Computer Engineering (IJECE), 7 (2). pp. 775-783. ISSN 2088-8708

Jidin, Auzani and Elbuluk, Malik E. and Sutikno, Tole and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim (2011) Extending switching frequency for torque ripple reduction utilizing a constant frequency torque controller in DTC of induction motors. Journal of Power Electronics, 11 (2). pp. 148-155. ISSN 15982092

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik E. (2011) Simple dynamic overmodulation strategy for fast torque control in DTC of induction machines with constant-switching-frequency controller. IEEE Transactions on Industry Applications, 47 (5). pp. 2283-2291. ISSN 0093-9994

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik E. (2011) An optimized switching strategy for quick dynamic torque control in DTC-hysteresis-based induction machines. IEEE Transactions on Industrial Electronics, 58 (8). pp. 3391-3400. ISSN 0278-0046

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik E. (2012) A wide-speed high torque capability utilizing overmodulation strategy in DTC of induction machines with constant switching frequency controller. IEEE Transactions on Power Electronics, 27 (5). pp. 2566-2575. ISSN 0885-8993

Jidin, Auzani and Sutikno, Tole and Nik Idris , Nik Rumzi and Jidin, Aiman Zakwan and Mohamed Yatim, Abdul Halim (2010) A Novel Dynamic Overmodulation Strategy of Direct Torque Control. TELKOMNIKA: Indonesian Journal of Electrical Engineering, 8 (3). 275 -284. ISSN 1693-6930

Kasrul, Abdul Karim and Md Nazri , Othman and Auzani , Jidin and Mohd Zulkifli, Ramli (2014) Development Of Integrated Monitoring System For Re-Electric Vehicle. Jurnal Teknologi, 71. pp. 99-104. ISSN 2180–3722 (Submitted)

Khisbullah , Hudha and zakaria, Mohd Hafidz and tamaldin, noreffendy (2011) Hardware in the Loop Simulation of Active Front Wheel Steering control for yaw disturbance rejection. International Journal of Vehicle Safety, 5 (4). pp. 356-373. ISSN 1479-3105

Lau, Saijod T.W. and Said, M. R. and Yaakob, Mohd Yuhazri (2012) On the effect of geometrical designs and failure modes in composite axial crushing: A literature review. Composite Structure, 94 (3). pp. 803-812. ISSN 0263-8223

Magaswaran, K. and Hassan, Muhammad Zahir and Phuman Singh, A.S. (2014) A Parallel Study of Vibration Analysis and Acoustic Analysis in Low Frequency Brake Noise. APPLIED MECHANICS AND MATERIALS, 471. pp. 35-39. ISSN 1662-7482

Magaswaran, K. and Phuman Singh, A.S. and Hassan, Muhammad Zahir (2013) An Analytical Model to Identify Brake System Vibration within the Low Frequency Domain. SAE International , SAE Technical Paper 2013-01-2033. pp. 1-8. ISSN 0148-7191

Mohamad, Najmiah Radiah and Yusoff, S. A. S. and Salleh, Azahari and Hashim, Nik Mohd Zarifie and Yusop, Norbayah and Misran, Mohamad Harris (2014) An Initial Development Of Simple And Low-Cost Approach For Affordable Semi-Automatic Car. International Journal for Advance Research in Engineering and Technology, 2 (XI). pp. 1-5. ISSN 2320-6802

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2018) The Feasibility Of Music And Talk Radio Program As A Focus Stimulant For Driver. International Journal Of Human And Technology Interaction (IJHaTI), 2 (1). pp. 45-49. ISSN 2950-3551

Mohammad Taha, Mastura and Salit @ Sinon, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application Of Hybrid Sugar Palm-Filled Polyurethane Application Of Hybrid Sugar Palm-Filled Polyurethane Composites In Conceptual Design Of An Automotive Anti Roll Bar. Journal of Engineering and Technology (JET), 7 (1). pp. 102-113. ISSN 2180-3811

Mohd Aras, Mohd Shahrieel and Boon, Pei Teow and Ai, Kee Teoh and Pei, Kee Lee and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2017) Evaluation And Analysis Of Pid And Fuzzy Control For AUV-YAW Control. Journal of Theoretical and Applied Information Technology, 95 (17). pp. 4256-4364. ISSN 1992-8645

Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Ab Rashid, Mohd Zamzuri and Abdul Azis, Fadilah and Khamis, Alias (2015) Dynamic mathematical design and modelling of autonomous control of All-Terrain Vehicles (ATV) using system identification technique based on pitch and yaw stability. International Review of Automatic Control (IREACO), 8 (2). pp. 140-148. ISSN 1974-6059

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Aras, Mohd Shahrieel and Mohd Ali, Nursabillilah and Wasbari, Faizil and Abu Bakar, Mohd Nor Fakurazy (2018) Design And Develop An Autonomous UAV Airship For Indoor Surveillance And Monitoring Applications. International Journal On Informatics Visualization, 2 (1). pp. 1-7. ISSN 2549-9610

Mohd Tahir, Musthafah and Ali, Muhammad Syahir and Mohd Shafie, Abdul Muhaimin and Abu Bakar, Rosli (2014) Simulation of single cylinder engine fuel with alternative fuel by using available software. International Review of Mechanical Engineering, 8 (4). pp. 798-802. ISSN 1970-8734

Mohd Zubir, Amir and Md Fahmi, Abd Samad (2016) Hardware-In-The-Loop Simulation Of Steer-By-Wire System In Automotive Vehicle. International Journal Of Advanced And Applied Sciences, 3 (9). pp. 51-58. ISSN 2313-626X

Muhamad Khairi, Aripin and Yahaya, Md. Sam and Kumeresan, A.D and Kemao , Peng and Norhazimi , Hamzah and Muhamad Fahezal, Ismail (2014) A Review of Active Yaw Control System for Vehicle Handling and Stability Enhancement. International Journal of Vehicular Technology, 2014. pp. 1-15. ISSN 1687-5710

Munir, F.A and M. Azmi, M.Irwan and M. Zin, Mohd Rody and Salim, M.A and Hassan, Muhammad Zahir (2011) Preliminary design of carbon composite facing for dry clutch disc of mini agricultural tractor. International Review of Mechanical Engineering, 5 (4). pp. 577-580. ISSN 1970-8734

Mustaffa Albakri, Ammar Alfaiz and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah and Rusnandi, Herdy and Mohd Adrinata, Shaharuzaman and Mansor, Muhd Ridzuan (2012) Design and Development of UTeM Perodua Eco-challenge Vehicle. Applied Mechanics and Materials, 165. pp. 202-208. ISSN 1660-9336

Musthafah, Mohd Tahir and Salim, Mohd Azli and Herawan, Safarudin Gazali and Abu Bakar, Rosli (2014) Feasibility study for energy recovery from internal combustion engine's waste heat. International Review of Mechanical Engineering, 8 (1). pp. 223-227. ISSN 1970-8734

Nawam, Muhammad Zaid and Mohd Rosli, Mohd Afzanizam and Rosli, Nor Azwar Syahila (2018) Simulation Study On The Effect Of Rear-Wing Spoiler On The Open Aerodynamic Performance Of Sedan Vehicle. Journal of Advanced Research In Fluid Mechanics And Thermal Sciences, 49 (2). pp. 146-154. ISSN 2289-7879

Phuman Singh, A.S. and Mat Darus, I.Z. (2014) Active roll control strategy using fuzzy logic control active suspension. WSEAS transactions on systems and control, 9. pp. 566-573. ISSN 2224-2856

Phuman Singh, Amrik Singh and Nishihara, Osamu (2018) Nondimensionalized univariate equation characterizing optimal state feedback control for collision avoidance. IEEE Transactions on Intelligent Transportation Systems, 19 (10). pp. 3344-3359. ISSN 1524-9050

Rahim, Siti Lydia and Maidin, Shajahan (2014) Feasibility Study Of Additive Manufacturing Technology Implementation In Malaysian Automotive Industry Using Analytic Hierarchy Process. Advanced Material Research, 903 (-). pp. 450-454. ISSN 1662-8985

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Aparow, Vimal Rau and Tamaldin, Noreffendy (2013) Modelling and Torque Tracking Control of Permanent Magnet Synchronous Motor For Hybrid Electric Vehicles. International Journal of Automotive and Mechanical Engineering , 7. pp. 955-967. ISSN 2229-8649 (Print); 2180-1606 (Online)

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Aparow, Vimal Rau and Jamaludin, Hishamuddin (2016) Simulation of Hybrid Electric Vehicle based on a Series Drive Train Layout. Jurnal Teknologi, UTM, 78 (6). pp. 211-221. ISSN 0127-9696

Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril (2016) Hydrogen Inlet Pressures Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3875-3882. ISSN 1819-6608

Rozaimi, Ghazali (2016) The Effects Of Parameter Variation In Open-Loop And Closed-Loop Control Scheme For An Electro-Hydraulic Actuator System. International Journal Of Control And Automation, 9 (1). pp. 283-294. ISSN -

Salleh, Zulhisyam and Sulaiman , Marizan and Omar, Rosli and Patakor, Fizatul Aini (2017) Optimization Of Fuzzy Logic Based For Vector Control Induction Motor Drives. Ieee Xplore. pp. 1-6. ISSN -

Sariman, Mohamad Zaharudin and Harun, Mohamad Hafiz and Ahmad, Fauzi and Md Yunos, Mohd Razali and Mat Yamin, Ahmad Kamal (2015) Vibration Control of a Passenger Car Engine Compartment Model using Passive Mounts Systems. Journal of Engineering and Applied Sciences, 10 (17). pp. 7472-7476. ISSN 1816-949X

Sariman, Mohamad Zaharudin and Harun, Mohamad Hafiz and Mat Yamin, Ahmad Kamal and Ahmad, Fauzi and Md Yunos, Mohd Razali (2015) Magnetorheological Fluid Engine Mounts: A Review on Structure Design of Semi Active Engine Mounting. International Journal of Materials, 2. pp. 6-16. ISSN 2313-0555

Seri Rahayu , Kamat and Norhidayah, Hashim (2013) A study on muscle fatigue associated with awkward posture among workers in aerospace industry. Advanced Engineering Forum, 10 (1). pp. 287-292. ISSN 103.26.74.254-27/05/14,09:25:29

Sudin, Mohd Nizam and ABDULLAH, Mohd Azman and Ramli, Faiz Redza and Musthafah, Mohd Tahir and Shamsudin, Shamsul Anuar (2014) Review of Research on Vehicles Aerodynamic Drag Reduction Methods. International Journal of Mechanical and Mechatronics Engineering, 14 (2). pp. 35-47. ISSN 2077-124X

Sutikno, Tole and Jidin, Auzani and Jidin, Aiman Zakwan and Nik Idris, Nik rumzi (2011) FPGA Based High Performance Torque and Flux Estimator. International Review of Electrical Engineering (IREE), 6 (1). pp. 207-214. ISSN 1827- 6660

Sutikno, Tole and Jidin, Auzani and Nik Idris, Nik Rumzi (2010) New approach FPGA-based implementation of discontinuous SVPWM. Turkish Journal of Electrical Engineering and Computer Sciences, 18 (4). pp. 499-514. ISSN 1300-0632

Sutikno, Tole and Jidin, Auzani and Wong, Jenn Hwa and Nik Idris, Nik Rumzi (2010) A Simple Approach of Space-vector Pulse Width Modulation Realization Based on Field Programmable Gate Array. Electric Power Components and Systems, 38. pp. 1546-1557. ISSN 1532-5008

Sutikno, Tole and Jidin, Auzani and Basar, Mohd Farriz (2010) Simple realization of 5-Segment discontinuous SVPWM based on FPGA. International Journal of Computer and Electrical Engineering, 2 (1). pp. 148-157. ISSN 1793-8198

Sutikno , Tole and Jidin, Auzani and Nik Idris, Nik Rumzi (2011) A New Fixed Switching Frequency Direct Torque Controlled PMSM Drives with Low Ripple in Flux and Torque. ITB Journal, 43 (3). pp. 173-190. ISSN 1978-3051

T., Joseph Sahaya Anand (2012) Nickel as an Alternative Automotive Body Materials. Journal of Mechanical Engineering and Sciences, 2. pp. 187-197. ISSN 2231-8380

Tamaldin, Noreffendy (2010) Experimental study of SCR in a light-duty diesel exhaust to provide data for validation of a CFD model using the porous medium approach. SAE 2010 World Congress & Exhibition, April 2010, Detroit, MI, USA, Session: Diesel Exhaust Emission Control: SCR (Part 3 of 3) (2010-01-1177).

Tan, CheeFai (2013) Total Design of Active Neck Support System for Economy Class Aircraft Seat. Applied Mechanics and Materials. pp. 657-660. ISSN 1660-9336

Tan, CheeFai and Khalil , Siti Nurhaida and Said, Md Radzai (2014) Numerical Modeling of Air-Based Bus Seat. Applied Mechanics and Materials, 663. pp. 610-613. ISSN 1660-9336

Tan, CheeFai and Sarban Singh, Ranjit Singh and Siti Aisyah, Anas (2011) Truck seating comfort: objectify and subjectify measurement approach. International Journal of Soft Computing and Engineering (IJSCE), 1 (5). pp. 1-6. ISSN 2231-2307

Zainal Ariffin, Ahmad Zainal Taufik and Mat Nuri @ Md Din, Nur Rashid and Ahmad Mansor, Mazlan and Hassan, Muhammad Zahir and Abdul Latif, Mohd Faruq (2014) Electric Car Chassis Design and Analysis by Using CATIA V5 R19. Electric car chassis design and analysis by using CATIA V5 R19. pp. 1-4. ISSN 2278-1684

Zainordin, Ahmad Zaifazlin and ABDULLAH, Mohd Azman and Hudha, Khisbullah (2013) Modelling and validation of magnetorheological brake responses using parametric approach. IOP Conf. Series: Materials Science and Engineering. pp. 1-8. ISSN 1757-899X

syed mohamed, muhammad syafiq (2014) Kansei Engineering Implementation on Car Center Stack Designs. International Journal of Education and Research , 2 (4). pp. 355-366. ISSN 2201-6740

Book Chapter

Muhamad Khairi, Aripin and Y.M, Sam and Kumeresan, A.D and Kemao , Peng and Mohd Hanif , Che Hasan and Muhamad Fahezal, Ismail (2013) A Yaw Rate Tracking Control of Active Front Steering System Using Composite Nonlinear Feedback. In: Asiasim 2013. Communications in Computer and Information Science, 402 . Springer Berlin Heidelberg, pp. 231-242. ISBN 978-3-642-45036-5

Conference or Workshop Item

Abal Abas , Zuraida and Shutler, Maurice (2007) Modelling the Deceleration Rate in the Train Braking Profile. In: International Conference of Engineering and JCT 2007 (ICEJ 2007), 2007, -. (Submitted)

Abdul Karim, Kasrul and Othman, Md Nazri and Abdullah, Abdul Rahim and Ramli, Mohd zulkifli and Jidin , Auzani (2012) A CONVERSION OF ICE SYSTEM INTO ELECTRIC VEHICLE. In: Power and Energy Conversion Symposium (PECS 2012), 17 December 2013, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.

Abdullah, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2012) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. In: International Conference on Manufacturing and Industrial Engineering (ICMIE’12) Dec. 29-30, 2012, Kuala Lumpur (Malaysia), 29 - 30 December 2012, Grand Seasons Hotel, Kuala Lumpur.

Alimin, Ahmad Jais and Tamaldin, Noreffendy and Mamat, Rizalman (2011) Strategic Research Partnership on Automotive Powertrain & Fuels in Universiti Malaysia Pahang, Universiti Teknikal Malaysia Melaka & Universiti Tun Hussein Onn Malaysia. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Aminurrashid , Noordin and Mohd Azli , Salim and Mohd Razali , Mohamad Sapiee and Sulaiman , Sabikan and Mohd Hanif , Che Hasan and Zamani, Md Sani and M.H., Othman (2012) Development of a quadruped crawling robot prototype. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Amzatul Akmam, Mokhtar and Md. Radzai, Said (2006) Axial crushing of fiber filled thin tubes. In: Seminar Pencapaian Penyelidikan KUTKM (REACH 2006), 18 - 20 Disember 2006, Holiday Inn Resort, Batu Feringgi, Pulau Pinang. (Submitted)

Aparow, Vimal Rau and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Development Of Antilock Braking System Based On Various Intelligent Control System. In: 2012 International Conference on Mechanical and Electrical Technology (ICMET 2012) , 24-26 Julai 2012, Kuala Lumpur . (Submitted)

Ashari, Muhamad Hafizullah and Mansor, Muhd Ridzuan and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2012) Design Of Space Frame Chassis For UTeM Formula Varsity Race Car. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Bahari, Norhazilina and Jidin , Auzani and Abdullah, Abdul Rahim and Othman, Md Nazri and Manap, Mustafa (2012) Modeling and simulation of torque hysteresis controller for brushless DC motor drives. In: IEEE Symposium on Industrial Electronics and Applications (ISIEA), 2012 , 23-26 Sept. 2012, Bandung, Indonesia.

Hairul Nizam, Talib and Zulkifilie, Ibrahim and N. A. , Rahim and N. M., Yaakob (2012) Development of combined vector and torque control methods for independent two induction motor drives. In: IEEE International Power Engineering and Optimization Conference (PEDCO), 6-7 June 2012, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Zahir and Brooks, Peter C. and Barton, David C. (2008) Fully coupled thermal-mechanical analysis of automotive disc brake squeal. In: Inaugural Automotive Researchers' Conference,, 8-9 January 2008, University of Huddersfield, United Kingdom.

Hassan, Muhammad Zahir and Brooks, Peter C. and Barton, David C. (2008) Thermo-mechanical contact analysis of car disc brake squeal. In: 26th Annual Brake Colloquium & Exhibition SAE International, 12 October 2008, St Antonio, Texas USA.

Hassan, Muhammad Zahir and Shamsudin, Shamsul Anuar (2005) Designing and Building Go-Karts As An Engineering Student Project. In: 4th Asia-Pacific Forum on Engineering and Technology Education, 26-29 September 2005, Bangkok Thailand.

Kher, V.K. and Tan, CheeFai and Ranjit, S.S.S. (2012) BUS ACCIDENTS PREVENTION WITH AN INTEGRATED STEERING SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Kumaresan, Magaswaran and Phuman Singh, A.S. and Hassan, Muhammad Zahir (2012) High Speed Experimental Study Of Friction Induced Vibration In Disc Brakes. In: International Conference on Mechanical and Electrical Technology (ICMET 2012) , 24-26 Julai 2012, Kuala Lumpur. (Submitted)

Mohammad Nasir, Mohd Zakaria and Dwijotomo, Abdurahman and Abdullah, Mohd Azman and Hudha, Khisbullah (2012) Hardware-in-the-loop simulation for automatic rack and pinion steering system. In: International Conference on Mechanical and Electrical Technology (ICMET 2012), 24-26 Julai 2012, Kuala Lumpur.

Musthafah, Mohd Tahir and Mohd Shafie, Abdul Muhaimin and Ali, Muhammad Syahir and Yusmady, Mohamed Arifin and Abu Bakar, Rosli (2014) INTAKE ANALYSIS ON FOUR-STROKE ENGINE USING CFD. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014, 26 -27 August 2014, Swiss Garden Resort & Spa, Kuantan, Pahang. (Submitted)

Noor Azam, Ahmad Faiz and Jidin, Auzani and Ngatiman, Nor Azazi and Jopri, M.H and Manap, Mustafa and Lukar Herlino, Adeline and Alias, Nor Faezah (2013) Current Control of BLDC Drives for EV Application. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Phuman Singh, A.S. and Hassan, Muhammad Zahir (2012) A parallel study of vibration analysis and acoustic analysis in low frequency brake noise. In: 4th International Conference on Noise, Vibration and Sound, 26-28 November 2012, Kuala Lumpur.

Phuman Singh, Amrik Singh and Nishihara, Osamu (2016) Nondimensionalized Indices for Collision Avoidance Based on Optimal Control Theory. In: FISITA 2016 World Automotive Congress, September 2016, Busan, Korea.

Phuman Singh, Amrik Singh and Nishihara, Osamu (2016) Obstacle Avoidance by Steering and Braking with Minimum Total Vehicle Force. In: 13th IFAC Symposium on Analysis, Design, and Evaluation of Human-Machine Systems HMS 2016, 30 August - 2 September 2016, Kyoto, Japan.

Phuman Singh, Amrik Singh and Nishihara, Osamu (2017) Trajectory Generation and Tracking Using Integrated Control of 4WS and DYC for Minimum Jerk Obstacle Avoidance. In: Future Active Safety Technology toward zero traffic accidents, FAST-zero ’17, 18 September 2017, Nara, Japan.

Rosley, Mohammad Nazry and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Zakaria, Muhammad Zulfattah and Mat Yamin, Ahmad Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine. In: The 4th International Conference on Engineering and ICT (ICEI 2016), 4 April 2016 - 6 April 2016, Hatten Hotel Melaka. (Submitted)

Saul, Jonathan and Porters, Sophie and Mat Yamin, Ahmad Kamal and Medina, Humberto and Aleksandrova, Svetlana and Benjamin, Stephen (2015) Influence of cyclic variance on the performance of URANS for pulsating flow upstream of an automotive catalyst monolith. In: IMechE internal Combustion Engines 2015, 02 December 2015 - 03 December 2015, Royal College of Physicians, London.

Suhaimi, Khalis and Mansor, Muhd Ridzuan and Mohd Rosli, Mohd Afzanizam and Abdul Kudus, Syahibudil Ikhwan and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2012) Design Of Formula Varsity Race Car Suspension Upright. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Tee, Boon Tuan and Gan, Chin Kim (2005) Optimization Of Vehicle Suspension System In Road Roughness. In: The Proceedings of the 2nd International Conference on Mechatronics, ICOM'05 , 10-12 May 2005, Kuala Lumpur. (Submitted)

Thesis

Abait, Siti Fatimah (2014) Jute/glass reinforced polyester resin laminated composite by compressive moulding mechanical properties based on different stacking sequence and surface treatment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahman, Muhammad Luqman Hakim (2015) Development of a novel electronically controlled wedge braking system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Kadir, Faizul Akmar (2018) Vehicle speed control using MRAC PID strategy for gradient disturbance rejection. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahman, Mohd Hafizi (2021) Optimization of lightweight front lower control arm using aluminium cast for C-Segment passenger vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Nurul Hanis (2022) Conceptualisation of modular airless tyre using kano, qfd and fast methodologies. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ad Suhadak, Fadrah Hanim (2019) Effect Of Variable Amplitude Loading On Fatigue Characteristic And Failure Probability For Automobile Steering Knuckle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahim, Mohammad Shazwan (2022) Multi-order proportional-derivative control for active vehicle suspension to improve ride performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Fauzi (2009) Gain scheduling PID control with pitch moment rejection for pneumatically actuated active suspension. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alif Zulfakar, Pokaad (2010) The Effectiveness Of Active Front Bumper System For Frontal Impact Protection Using Magnetorheological. Masters thesis, UTeM.

Amir, Mohd Zubir (2016) Development Of Steer-By-Wire (SBW) Controller System For Steering Respone. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ani, Mohammad Firdaus (2016) Developing Regression Models Of Driver Fatigue Using An Ergonomics Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azahari, Norzailan (2021) Investigation on the sound transmission loss of door sealing system using hybrid FE-SEA method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azidin, Farid Arafat (2016) Energy Management System For Three-Wheel Light Electric Vehicle Using Multi-Sources Energy Models. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Azman, Faris (2017) Numerical simulation of defogging on automotive windshield. Masters thesis, Universiti Teknikal Malaysia Melaka.

Baharin, Bahrom (2017) Thermal stress effect on disc brake rotor for NGV vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bahri, Azizi (2013) Simulation and analysis of material transport system in automotive industry area. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chin, Kwang Yhee (2021) Experimental study of yaw angle effect on aerodynamic performance of road vehicle with rear spoiler. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dahlan, Ainol Suhada (2016) Automatic tyre pressure replenishing system development assisted by mathematical modelling and finite element analysis. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Dwijotomo, Abdurahman (2015) Intergration of vision based road lane detection for automatic streeting control (ASC) application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Engku Ariff, Engku Amirul Rashidin (2019) Analysis Of Hatchback Car Between Manual And CVT Transmission Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Fitrian , Imadduddin (2010) Control Of Pneumatically Actuated Active Suspension System Using Multiple Proportional - Integral With Knowledge - Based Fuzzy. Masters thesis, UTeM.

Gee, Soon Yow (2018) The Study Of Driver's Acceptance Toward Self Driving Vehicle In Melaka. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Hakimi, Halimaton Saadiah (2020) Trust Requirements Approach For Eliciting Requirements Autonomous Car. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Muhammed Noor (2016) An Optimization Of Drag Reduction Of An Automotive Roof Box. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Azhar (2016) Antilock bracking system control using fractional gain PID controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jagatheesvaran, Uvaaraj (2022) Rear - end heavy vehicle crash analysis using ANSYS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jayahkudy, Raguvaran (2016) Application Of Bio-Glycol To Inhibit Natural Pressure Loss In Automotive Tyre. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khaleel, Mohamed Adnan (2016) An Investigation Of Car Bumper With Respect To Impact Energy Absorption. Masters thesis, Universiti Teknikal Malaysia Melaka.

Magaswaran, Kumaresan (2014) Low frequency friction induced vibration of automotive disc brake. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahamed, Mohd Hirzan (2022) Pitch motion control using active suspension during antilock braking. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Yusof, Hasrul Izatie (2018) Design Of Safety Features For Heavy Vehicles In Malaysia. Masters thesis, UTeM.

Md. Sukardi, Mohd Saiful (2016) Active front steering for passenger vehicle using fuzzy PID method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Norani, Nor Ayu (2020) Analysis And Improvement Of Radiator Performance In Spark Ignition (SI) Engine Cooling System By Using Different Types Of Coolant Concentrations And Fins Materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamed Jamil, Fathiah (2017) Multi-order PID controller design for active anti-roll suspension system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shafie, Abdul Muhaimin (2017) CFD analysis of intake flow in the L-head engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd. Wazir, Mohd. Firdaus (2019) Design improvement of a race car chassis for Educational Innovation In Motorsport And Automotive Racing (EIMARace) event. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Zaidan , Abdul Manaf (2013) Pembangunan sistem pendorongan kenderaan hibrid dua alam untuk operasi penyelamat marin (Development of hybrid amphibious vehicle propulsion system for marine safety and rescue operation). Other thesis, UTeM.

Mutafa, Mastura (2019) Flow Characteristics Of A Two-Dimensional Diffuser Of Catalytic Converters Situated Close To Engines Using Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naina Mohamed, Abdul Razak (2020) Adaptive Cruise Control For Electric Vehicles. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norazni, Nor Shazwan Azrul (2017) Simulation study on transverse vibration for automotive absorber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Omar, Mohd Firdaus (2020) Particle Swarm Optimization Of Direct Yaw Control Using Linear Quadratic Integral For Vehicle Stability. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Hamizan (2018) Investment analysis of a new paint shop in automotive industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rahmat, Mohd Sabirin (2015) Modelling, Simulation And Control Of A Series Hybrid Electric Vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka..

Razali, Mohd Faiz (2022) Study of sway swings on container trailer trucks. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ridzuan, Mohd Rasyidi (2016) Active Suspension Control Using Multiorder PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saahari, Farahanizan (2020) Modelling, Simulation And Speed Control Of Electric Vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sariman, Mohamad Zaharudin (2016) Modelling And Control Of A Semi-Active Magnetorheological Damper For Engine Mounting Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shaharudin, Nur Amalina (2021) Autonomous Collision Avoidance System Using Combined Four-Wheel Steering And Direct Yaw-Moment Control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Su, Muhammad Nasiruddin (2017) Energy Absorption Analysis Of Low Speed Frontal Impact For Bumper Beam Through Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sukri, Mohamad Firdaus (2017) Simulation And Analysis Of A Direct Current Operated Automotive Air-Conditioning System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ubaidillah, . (2010) Sixth Order Polynomial Model And Skyhook Algorithm Based Fuzzy Logic Control Of Magnetorheological Damper For Automotive Suspension System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainol, Sabri Adlan (2022) Experimental investigation on performance and emission of a small generator spark ignition engine fueled with hydrogen peroxide-gasoline. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainordin, Ahmad Zaifazlin (2014) Characterization of magnetorheological brake for speed control application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Hikmah (2017) Impact test simulation of automotive wheel rim using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Mohamed Al-Sideque (2016) Aerodynamic performance comparison of various hatchback rear spoiler configurations using CFD analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zakaria, Mohd Hafidz (2014) The development of active front wheel steering system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zaqout, Ahmed Z. I. (2018) Predictive study of fluid flow through an intake system restrictor of a single-seater racing car. Masters thesis, Universiti Teknikal Malaysia Melaka.

Patent

Sivarao Subramonian (2012) An Automatic Tyre Inflating System (ATIS). PI 2012002727.

Sivarao Subramonian (2012) Hydo-gas Airless Tyre (HAT). PI 2012701286.

Sivarao Subramonian (2012) Magnetic Airless Tyre (MAT). PI 2012701282.

Sivarao Subramonian (2012) A Tyre Pressure Sustaining System (T-PreSS). PI 2012002728.