Items where Division is "Library > Tesis > FKM" and Year is 2019

Abdul Hamid, Abdul Hakim (2019) Experimental Investigation On The Influence Of DLC Coating On The Wear Behaviour Of Helical Gear. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Munajat, Nurain (2019) The Development Of Carbon Nanotube/Carbon Nanofibre From Polyacrylonitrile Electrospun Nanofibre Precursor For Electronic Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Ahmad Shafawi (2019) Computational Fluid Dynamics Study Of Bio-Mimetic Wind Turbine For Energy Harvesting Using OpenFOAM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Amirah (2019) Stability And Thermal Properties Of Hydroxyl Multiwalled Carbon Nanotubes In Different Medium. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Zailinda (2019) Mechanical Behaviour Of Carbon Reinforced Polymer Using RTM And VIP Techniques For Aircraft Spoiler Hinge. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ad Suhadak, Fadrah Hanim (2019) Effect Of Variable Amplitude Loading On Fatigue Characteristic And Failure Probability For Automobile Steering Knuckle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alhammali, Abdalraouf Abdulsalam Musod (2019) Energy Audit And Improvement In The Human Development And Language Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Muhamad Syafwan (2019) Vibration Analysis Of Fused Deposition Modeling Printed Lattice Structures Cellular Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Buyamin, Norsheila (2019) Effect of low temperature on the performance of carbo -based conductive ink for flexible printed circuit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Che Noordin, Muhammad Redzuan (2019) Effect Of Kirigami Pattern Designs On Ultra-Stretchable Conductive Polymer Mechanical Properties For Thin Film Solar Photovoltaic Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chuli, Abd Jumaidi (2019) An Investigation Of Energy Absorption Characteristics Of Honeycomb Structure Under Lateral Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Engku Ariff, Engku Amirul Rashidin (2019) Analysis Of Hatchback Car Between Manual And CVT Transmission Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gulam Mahfuze, Nur Adibah (2019) Occupants' Perception Towards Thermal Sensation In Engineering Laboratory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Najmi Aiman (2019) Physical - mechanical properties of elastomer diluted with B10 and B20 biodiesel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hussain, Nur Fadzila (2019) Low Velocity Impact Response Of Oil Palm Empty Fruit Bunch Fibre Metal Laminates. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Maziah (2019) Friction improvement of palm kernel activated carbon-epoxy by oil and water impregnation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamil, Muhammad Hasif (2019) Analysis of photovoltaic thermal using f-Chart method for domestic hot water. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jasmee, Solehah (2019) Hydrophobicity Performance Of Polyethylene Terephthalate, Thermoplastic Polyurethane And Aluminium Substrates Using Self-Fabricated Contact Angle Tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jimit, Roy Hanson (2019) Fatigue Life Behaviour Of Fiberglass Reinforced Composites Subjected To Constant And Variable Amplitude Loadings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jumadi, Muhammad Taufiq (2019) Investigation On Physical, Thermal, Mechanical And Morphological Properties Of Kenaf Reinforced Recycled Polypropylene/Polyethylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Zahir, Nur Aizatul 'Ain (2019) Optimization Of Hybrid Carbon And Glass Fiber Reinforced Polymer Using Analytical Hierarchy Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Norani, Mohamad Nordin (2019) Optimization Of A Natural Aspirated Hydrogen Diesel Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad, Muhammad Azrain (2019) Investigation Of OLED Performance In Non-Operated Mode Subjected To High Thermal Stress And Hygrothermal Aging. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ishak, Noordiana (2019) Concurrent Engineering Approach In The Development Of Natural Fibre Metal Laminate Product : Case Study On Car Front Hood. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Mohd Zulfadly (2019) Conceptual Retrofit Design Of Sustainable Energy Management System For Office Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shah, Mohd Syahrir (2019) Improvement of an indoor environmental quality (IEQ) in university healthcare building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zalani, Naziatul Fazilah (2019) Investigation On Mechanical Behaviour Of Light Weight Woven Kenaf Fibre Reinforced Polypropylene-Aluminium Fibre Metal Laminate. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zamberi, Mahani (2019) Nano Scale Mechanical Properties of Carbon Black Conductive Ink in Improving Efficiency for Electronics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohmad, Martini (2019) Frictional Characteristics Of Surface Textured Activated Carbon Composite Derived From Palm Kernel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Said, Nurlaela (2019) Investigation Of Impact Strain Signal Characteristics For Material Behaviour Prediction From Charpy Test. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustaffa., Siti Hajar Adni (2019) Numerical Investigation Of Flow Characteristics Of An Oscillatory Flow Across A Thermoacoustic Stack. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mutafa, Mastura (2019) Flow Characteristics Of A Two-Dimensional Diffuser Of Catalytic Converters Situated Close To Engines Using Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nahar, Mohd Nazrin (2019) Energy efficiency in heating ventilation air conditioning and refrigeration (HVAC & R) operation through variable frequency drive (VFD) application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naroh, Azmi (2019) Characteristic on electromagnetic energy harvesting using graphene/silver filled epoxy for PVT thermal hybrid solar collector. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nasaruddin, Muhamad Muaz (2019) Reliability Performance Of Epoxy Based Electrically Conductive Adhesive With Varying Multiwalled Carbon Nanotube. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norashid, Norjannahtul Ainah (2019) Investigation On Tribological Properties Of 3D Printed ABS And Molded ABS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razali, Amirul Herman (2019) Optimization Of Composite Hinges For Aircraft Spoiler Using Finite Element Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razi, Mashitah (2019) Streamflow Predictive Model Using Reliable Distribution Method To Enhance Small Hydropower System Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Roslan, Nur Saidatul Akmal (2019) Electrospun Nylon 6 Nanofibre Water Filtration Media For Wastewater Treatment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosli, Nur Ameelia (2019) Effect Of Post Processing Parameters Andcompression Behavior On FDM 3D-Printed ABS Lattice-Structures. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosszainily., Intan Raihan Asni (2019) Effect Of Carbon Black Reinforcement On The Mechanical Properties Malaysia Rubber Compound. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rudzlan Apandi, Noor Shakinah (2019) Vibration Characteristics On Ball Bearing Operated With Hexagonal Boron Nitride Nanoparticles Mixed With Conventional Diesel Engine Oil. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shezad, Zaeem (2019) Total Energy Management Of A University Engineering Building Through Audit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Susilo, Sidik (2019) On Energy Harvesting Mechanism Utilizing Flexural Vibration Of A Piezoelectric Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Mohamad, Wan Mohd Farid (2019) Influence Of Mechanical Process On The Stress Corrosion Cracking Of 316L Stainless Steel For Implant Application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Zainal Abidin, Syazwani (2019) Thermophysical Properties Of CNF-Based Nanocoolant As A Heat Transfer Media. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Farah Ayiesya (2019) Experimental Study Of Flow Around Airfoil Using Dielectric Barrier Discharge Plasma Actuator. Masters thesis, Universiti Teknikal Malaysia Melaka.