Browse By Repository:

 
 
 
   

Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type
Jump to: | ' | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items at this level: 1341.

Intan Zarina, Mohd Yusoff (2015) Optimization Of Aerodynamic On Side View Mirror. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abal Abas, Zuraida (2013) Extended Advancing Front Technique for the Initial Triangular Mesh Construction on a Single Coil for Radiative Heat Transfer. Arabian Journal for Science and Engineering. pp. 1-18. ISSN 13198025

Laith , Nazeeh Jamil Bany Melhem (2015) Illumination removal and text segmnetation for Al-Quran using binary representation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Salihin , Hj Abd Rahim (2007) The Study Of Eccentricity Of Circular Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Jamli, Mohd Ali (2008) Analysis Of Sawmill Workers Through Integration Of Video Observation And RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Afiq, Nik Mohd Arif (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Rectangular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajes, K.M.Rajan (2014) Synthesis And Characterization Of Electrodeposited Nickel Chalcogenides For Photoelectrochemical/ Solar Cell Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yuvarajan , Karathihayan (2013) Modelling of palm fibre polypropylene composite for randomly distributed fibre reinforcement. Project Report. UTeM, Melaka. (Submitted)

Za'im Junaydi, Yusof (2015) Sound Absorption Performance Of A Acrylic-Based Micro Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

'

'Aishah, Hassan (2013) Fabrication Of Activated Carbon Filled Epoxidized Natural Rubber Composite Via Solvent Casting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A. P., Puvanasvaran and M. R. , Muhamad (2009) Leanness Achievement through People Development System in Implementing Lean Process Management. American J. of Engineering and Applied Sciences, 2 (1). pp. 105-119. ISSN 1941-7020

A. P., Puvanasvaran and M.R, Muhamad (2008) A Review of Problem Solving Capabilities in Lean Process Management. American Journal of Applied Science, 5 (5). pp. 504-511. ISSN 1546-9239

A.Rahman, Hasimah and Majid, Md.Shah and Jordehi, A.Rezaee and Gan, Chin Kim and Hassan, Mohammad Yusri and O.Fadh, Saeed (2015) Operation And Control Strategies Of Integrated Distributed Energy Resources : A Review. Renewable And Sustainable Energy Reviews, 51 (-). pp. 1412-1420. ISSN -

ABD RAZAK , JEEFFERIE and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of polypropylene/multiwalled carbon nanotube nanocomposites via direct melt compounding. Journal of Elastomers & Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

AL-Dabbagh , Minah Mohammed Fareed Abd-A (2016) AXIAL Crushing Of Thin-Walled Tube With Hole Under Quasi-Static Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab Ghani, Ahmad Fuad and Ali, Mohd Basri and Dhar malingam, Sivakumar and Mahmud, Jamaluddin (2016) Digital Image Correlation (DIC) Technique In Measuring Strain Using Opensource Platform Ncorr. Journal of Advanced Research in Applied Mechanics, 26. pp. 10-21. ISSN 2289-7895

Ab Ghani, Ahmad Fuad and Mahmud , Jamaluddin (2017) Material Characterization Of Hybrid Composite: Experimental Using Strain GAUGE/DIC With Finite Element Modelling Macro/Micro Scalens. Key Engineering Materials, 740 (-). pp. 31-40. ISSN 1662-9795

Ab Ghani, Mohd Ruddin and Nabil, Farah and Mat Lazi, Jurifa and Mohd Amin, Nur Huda and Othman, Syariffah and Jano, Zanariah (2016) Comparative Study Of Different Multilevel Topologies Of Five Level Inverter Using Spwm. International Journal of Applied Engineering Research, 11 (20). pp. 10139-10145. ISSN 0973-4562

Ab Rahman, Mohd Fauzi and Kok, Swee Leong (2012) Investigation of useful ambient vibration sources for the application of energy harvesting. In: 2011 IEEE Student Conference on Research and Development, 19-20 December 2011, Cyberjaya. (Submitted)

Ab Rashid, Mohd Zamzuri and Ahmad Izzuddin, Tarmizi and Abas, Norafizah and Hasim, Norhaslinda and Abd Azis, Fadilah and Mohd Aras, Mohd Shahrieel (2013) Control of Automatic Food Drive-Through System using Programmable Logic Controller (PLC). International Journal of u- and e- Service, Science and Technology, 6 (4). pp. 41-50. ISSN 2005-4246

Ab Rashid, Mohd Zamzuri and Mohd Aras, Mohd Shahrieel and Mohd Shah, Hairol Nizam and Lim , Wee Teck and Ibrahim, Zulkifilie (2012) Design and System Parameter’s Validation of the Unicycle Mobile Robot. In: First International Conference on Control, Automation and Information Sciences (ICCAIS 2012), November 26-29, 2012, Grand Hotel Saigon, ho chi minh vietnam.

Ab Rashid, Siti Rosmaniza and Ismail, Mahamod (2011) Development of A Secured Database Access on Application Server. International Journal of Research and Reviews in Information Security and Privacy (IJRRISP), 1 (3). pp. 39-41. ISSN 2046-5718

Ab. Latif, Nurain Shyafina (2016) Sound Radiation From Vibrating Plate With Different Boundary Conditions Using Discrete Source Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abal Abas, Zuraida and Salleh, Shaharuddin and Ilias, Shazwani and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad and Mohd Aboobaider, Burhanuddin and Sidek, Safiah (2014) An insight into the science of unstructured meshes in computer numerical simulation. Applied Mathematical Sciences. 8493 -8516. ISSN 1312-885X

Abal Abas, Zuraida and Salleh, Shaharuddin and Rahman, Ahmad Fadzli Nizam and Basiron, Halizah and Hasan Basari, Abd Samad and Hassim, Nurulhalim (2013) Improvement of Element Creation Procedure for Generating Initial Triangular Unstructured Mesh for Radiative Heat Transfer Modelling. International Review on Modelling and Simulations, 6 (5). pp. 1649-1656. ISSN 1974-9821

Abas, Norafizah and Ab. Rashid , Mohd Zamzuri and Ibrahim, Zulkifilie and Samsudin, Nur hazahsha (2013) Design of Auto-stabilization Control Technique for a Quadrotor System. Design of Auto-stabilization Control Technique for a Quadrotor System, Vols. . pp. 559-564. ISSN AMM.313-314.559

Abas, Norafizah and Ibrahim, Zulkifilie and Rahim, Nor Hidayah and M. Kassim, Anuar (2013) Modeling and System Identification using Extended Kalman Filter for a Quadrotor System. Modeling and System Identification using Extended Kalman Filter for a. pp. 976-981. ISSN AMM.313-314.976

Abd Aziz, Kadir (2006) Structural Design And Analysis Of Sewerage Inspection Crawler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Norfarhana (2016) Effects Of MWCNTS Surface Modification On The Thermal And Mechanical Properties Of Epoxy Filled MWCNTS Nanocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yusainee, Syed Yahya (2015) Detection of tube defect using the autoregressive algorithm. Steel and Composite Structures, 19. pp. 131-152. ISSN 1598-6233

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusainee (2015) Vibration Impact Acoustic Emission Technique For Identification And Analysis Of Defects In Carbon Steel Tubes: Part A Statistical Analysis. Journal of Mechanical Science and Technology, 29. pp. 1547-1557. ISSN 1976-3824

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusainee (2015) Vibration Impact Acoustic Emission Technique For Identification And Analysis Of Defects In Carbon Steel Tubes: Part B Cluster Analysis. Journal of Mechanical Science and Technology, 29. pp. 1559-1570. ISSN 1976-3824

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yusainee, Syed Yahya (2015) Pattern Recognition Approach Of Stress Wave Propagation In Carbon Steel Tubes For Defect Detection. International Journal of Computer Theory and Engineering, 7. pp. 139-144. ISSN 1793-8201

Abd Khair, Fazlin and Putra, Azma and Mohd Nor, Mohd Jailani and Mohd Lazim, Nurul Atiqah and Selamat, Mohd Zulkefli (2014) Preliminary Study On Bamboo As Sound Absorber. Applied Mechanics and Materials, 554 (-). pp. 76-80. ISSN 1660-9336

Abd Manaf, Rumaisa (2016) Case Study Effect Of Temperature On The Nanoparticle Stability Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Ahmad Shahizam (2016) Development Of Nanofiber-Coated Cabin Air Filter For Enhancing Filtration Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahman, Rahim (2009) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Kamarul Ariffin and Husain, Mohd Nor and Othman, Abdul Rani and Abd Aziz, Mohamad Zoinol Abidin and Saad, M.M and Senon , M. and Ahmad , M. T. and Hamidon, J. Sam (2014) Design Of Linear Polarization Antenna For Wireless MIMO Application. ARPN Journal Of Engineering And Applied Sciences, 9 (7). pp. 1026-1030. ISSN 1819-6608

Abd Rashid, Nur Umiza (2016) Nano Hybrid Of MWCNTs GNPs Filled Epoxy Nanocomposites For Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Jeefferie and Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub, Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile Surface Modification Of Graphene Nanoplatelets (GNPS) Using Covalent ATPS-Dehydration (GNPS-ATPS) And Non-Covalent Polyetherimide Adsorption (GNPS-PEI) Method. APPLIED MECHANICS AND MATERIALS, 761 (-). pp. 391-396. ISSN -

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam Dr, Chantara Thevy A/P and Mahamood, Mazlin Aida and Lau, Kok Tee and Ab Maulod, Hairul Effendy and Munawar, Rose Farahiyan and Mohamad, Noraiham (2014) Non-Covalent Polymeric Wrapping Of Igepal C0890 Fo Graphene Nanoplatelets (Gnps-C0890) Filled Nr/Epdm Rubber Blend Nanocomposites. Applied Mechanics and Materials, 761. pp. 385-390. ISSN 1660-9336

Abd Salam, Adam (2009) Mereka Bentuk Platfom Keselamatan Untuk Kerja-Kerja Membuka Dan Menutup Kanvas Lori. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Samad, Md Fahmi (2011) Deterministic Mutation-Based Algorithm for Model Structure Selection in Discrete-Time System Identification. International Journal of Intelligent Control and Systems, 16 (3). pp. 182-190. ISSN 02187965

Abd Samad, Md Fahmi (2007) Optimum grouping in a modified genetic algorithm for discrete-time, non-linear system identification. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, 221 (7). pp. 975-989. ISSN 0959-6518

Abd Samad, Md Fahmi and Hishamuddin, Jamaluddin and Robiah, Ahmad and Mohd Shafiek, Yaacob and Abul K. M., Azad (2013) Effect of Penalty Function Parameter in Objective Function of System Identification. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 940-954. ISSN 2180-1606

Abd. Rahman, Md. Nizam and Abdullah, Rohana (2012) WORK STUDY TECHNIQUES EVALUATION AT BACK-END SEMICONDUCTOR MANUFACTURING. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

Abdul Alif, Abdul Aziz (2011) A Feasibility Study Of 3D Printer Parameters Optimization By Using Bamboo Powders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hadi, Nur Aisyah (2016) Redesign Material Handling System By Using Ergonomic Approach To Reduce Back Pain Risk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Anas and Kadir, N.A and Ismail, E.I. and Shamsuddin, H. and Ahmad, H. and Harun, S.W. (2017) All-Fiber Dual-Wavelength Q-Switched And Mode-Locked EDFL By SMF-THDF-SMF Structure As A Saturable Absorber. Optics Communications, 389 (-). pp. 29-34. ISSN -

Abdul Latiff, Anas and M. Rusdi, M. F. and Hisyam, M. B. and Ahmad, H. and Harun, S. W. (2017) A Generation Of 2 Um Q-Switched Thulium-Doped Fibre Laser Based On Anatase Titanium (IV) Oxide Film Saturable Absorber. Journal Of Modern Optics, 64 (2). pp. 187-189. ISSN 0950-0340

Abdul Mu'in, Haz'zaid (2012) Modelling And Study Of Femur Bone Under Normal loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mu'iz, Abdul Hamid (2015) Anthropometric Characteristics Of Technology Campus Students And Their Relationship With Existing Bus Stop Bench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Jaafar (2015) Study Of Selected Properties Of Low Density Alloy After The Heat Treatment Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Ahmad (2013) Design And Analyse The Configuration Of Earthing System Based On High-Low And Low-High Soil Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Azrul Azwan and Bilge, Pinar and Seliger, Günther (2011) Simulation Aided Development of Alternatives for Improved Maintenance Network. In: 7th International Conference on Digital Enterprise Technology, 28-30 September 2011, Athens, Greece.

Abdul Rahman, Azrul Azwan and Kernbaum, Sebastian (2007) Simulation Based Control System for a Manufacturing System. In: Conference on Application and Design in Mechanical Engineering, 25-26 Ocktober 2007, Perlis.

Abdul Rahman, Azrul Azwan and Seliger, Günther (2013) Integrated control system simulation for supporting changes of routing strategy in an automated material flow system. Procedia CIRP. pp. 407-412. ISSN 2212-8271

Abdul Rahman, Azrul Azwan and Seliger, Günther (2011) Simulation as a tool in Self Adaptive Control for Flexible Assembly Systems. In: The 44th CIRP Conference on Manufacturing Systems, 31.5.2011 - 3.6.2011, Madison, Wisconsin, USA.

Abdul Rahman, Nor Nabilah Syazana (2016) Automatic Computer Vision System For Industrial Product Quality Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman , Mohd Nasir (2015) Shape optimization of generic side view mirror. Project Report. UTeM. (Submitted)

Abdul Rashid, Muhammad Faiz Haiqal (2016) Optimization Study On Process Condition Of Durian Shell Pulping Towards Hydrophobicity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak , Bahtrem (2007) Proses Fabrikasi Dan Pencirian Bahan Komposit Laminat Untuk Industri Kapal Terbang. Project Report. UTeM, Melaka. (Submitted)

Abdul Rob, Muhammad Faiz (2016) A Study On Machining Strategies For Thin-Walled Five-Axis Pocketing Profile : Aero-Structural Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and RAFAN, NUR AIDAWATY (2012) Systematic Method for Cutting Forces Characterization for XY Milling Table Ballscrew Drive System. International Journal of Mechanical & Mechatronics Engineering IJMME, 12 (1). pp. 28-33. ISSN 2077-124X

Abdullah, Lokman and Jamaludin, Zamberi and RAFAN, NUR AIDAWATY and Jamaludin, Jailani and Tsung Heng, Chiew (2013) Assessment on tracking error performance of Cascade P/PI, NPID and N-Cascade controller for precise positioning of xy table ballscrew drive system. In: International Confernce on Mechatronics (ICOM 2013), 2 - 4 July 2013, Vistana Hotel Kuala Lumpur, Malaysia.

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and M.Y, YUHAZRI (2012) Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system. Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system , 229-231. pp. 750-755. ISSN 16609336

Abdullah, Rohana and Abd Rahman, Md Nizam and Khalil, S.N. (2014) Human System Modeling for Optimum Labor Utilization and Man-Machine Configuration. International Journal of Engineering & Technology IJET / IJENS, 14 (1). pp. 75-79. ISSN 2077-1185

Abdullah, Rohana and Ahmad, Nurul Huda (2010) Development of Automated Maynard Operation Sequence TEchnique (MOST) Work Study Technique: Case Study at Aerospace Manufacturing Company Using Lean Six Sigma. In: 3rd International Conference on Science and Technology: Applications in Industry and Education, 16-17 Dec 2010, The Gurney Resort Hotel and Residence, Penang.

Abdullah, Rohana and Mohamad, Nor Akramin and Kamat, Seri Rahayu (2013) Industrial Engineering for Technologist - Part 1. [Teaching Resource]

Abdullah, Rohana and mohamad, Nor Akramin and Kamat, Seri Rahayu (2013) Industrial Engineering For Technologist - Part 2. [Teaching Resource]

Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and RAFAN, NUR AIDAWATY and Shaaban, Azizah (2014) Spectral Analysis of Cutting Forces Data for XY Table Ballscrew Drive System. Applied Mechanics and Materials, 471 (1). pp. 241-246. ISSN 1660-9336

Abdullah, Lokman and Jamaludin, Zamberi and Salleh, Mohd Rizal and Abu Bakar, Baharudin and Maslan, Mohd Nazmin and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY (2013) Design and Analysis of Self-tuned Nonlinear PID Controller for XY Table Ballscrew Drive System. In: 2nd International Symposium on Computer, Communication, Control and Automation (3CA 2013), 1 - 2 December 2013, Holiday Inn Atrium, Singapore.

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and syed mohamed, muhammad syafiq (2012) System Identification of XY Table ballscrew drive using parametric and non parametric frequency domain estimation via deterministic approach. Procedia Engineering , 41. pp. 567-574. ISSN 1877-7058

Abdullah, Nur Suhaida (2016) Experimental Investigation On Coconut Fibre Composition Profiling With Respect To The Modulus Of Rigidity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Rohana and Abd Rahman, Md Nizam (2014) Work Study Architecture for Lean Waste Analysis to Achieve Optimum Man-Machine Configuration. International Journal of Basic and Applied Sciences IJBAS / IJENS, 14 (1). pp. 1-6. ISSN 2077-1223

Abdullah, Rohana and Mohamad, Effendi and Mohamad, Nor Akramin and Saptari, Adi (2009) Productivity Analysis Towards Lean Manufacturing at a Textile Manufacturing Company. In: Malaysian Technical Universities Conference on Engineering and Technology 2009, 20-22 June 2009, MS Garden Hotel, Kuantan, Pahang.

Abdullah, Rohana and Mohamad, Effendi and Muhamad, Mohd Razali (2008) Managing Key Performance Indicators (KPIs): A Case Study at an Aerospace Manufacturing Facility. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Abdullah, Rohana and Mohamad, Nor Akramin and Abdul Rahman, Mohd Soufhwee (2011) Design and Development of Material Requirement Planning (MRP)Tool for an Electronic Product Manufacturer. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Abdullah, Rohana and Saptari, Adi and mohamad, Nor Akramin (2010) Manpower Optimization and Process Efficiency Improvement at a Textile Manufacturing Company. In: Waset 2010, 24-26 Feb 2010, Bayview Hotel, Georgetown, Penang.

Abdullah, Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Mahadhir, Majidah and Abal Abas, Zuraida (2016) Fingerprint Based Gender Classification Using Discrete Wavelet Transform And K-Nearest Neighbor. International Journal of Computer Science and Information Security (IJCSIS), 14 (8). pp. 340-344. ISSN 1947-5500

Abidin, Roziah (2008) Investigation Of Inter Material Shear Properties Of Iron And Stannum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316

Abu Bakar, Noor Farah Iddayu (2016) Formation Of Iron Oxide Nanostructure By Thermal Oxidation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar , Aramjat (2014) The effects of glass waste and grog on physical and mechanical properties in porcelain by powder pressing method. Masters thesis, UTeM.

Abul Jalil, Mujahidah (2016) Round Nose Bullet Design Using High-Profile Curve Definition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adeline Chua, Jia Min (2014) Image restoration using mean, median and adaptive filter. Project Report. UTeM. (Submitted)

Adi , Saptari and Seri Rahayu , Kamat and Wan Hasrulnizzam , Wan Mahmood and Isa, Halim (2005) Analysis Of Workstation Design In Assembly Line For Small Scale Electric Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adiyana, Sukor (2011) An Investigation Of Human Factor Engineering And Human Behavior On Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adli Zil Ikram , Abdullah (2013) Analysis the i beam subjected to three point loading or bending for different material. Project Report. UTeM, Melaka. (Submitted)

Afda Rizan, Ismail (2005) Manual Wheelchair Design Improvements And Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah Maheran, Abdul Hamid (2006) Alat Kawalan Jauh Infra-Merah Pelbagai Peralatan Dan Litar Penerima. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Aireen (2016) Evaluation On Difference Working Posture Using RULA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Shakir and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Mohamad Yunus, Indera Kasuma and Azman, Mohd Syafiq (2013) Effect of Different Filler Materials in the Development of Bipolar Plate Composite for Polymer Electrolyte Membrane Fuel Cell (PEMFC). Applied Mechanics and Materials, 315 (2013). pp. 226-230. ISSN 10.4028/www.scientific.net/AMM.315.226

Ahmad Aizat, Noh (2015) Glass Bottle Defect Detection By Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Arif Fahmi, Turin (2015) Comparative Evaluation Of Existing Product For Eco-Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Asyraf, Shari (2008) Non-Intrusive Liquid Level Detection System Using Ultrasound Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Deli, Mohd Noor (2009) Menganalisa Keadaan Bukan Linear Analisis Unsur Terhingga Terhadap Rasuk Daripada Struktur Badan Bas Apabila Dikenakan Daya Lentur. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fadhil, Dzulkafli (2011) Performance Evaluation Of Coordinate Measuring Machines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Kamarul Zaman (2009) Design Improvement Of Existing Executives Chair In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faizal, Azmil (2008) Finite Element Modeling, Analysis And Simulation Of Wide Rim Alloy Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fakhruddin , Yusoff (2007) Pembangunan Perisian Untuk Pengimbas Kod Bar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Falah , Zainol Azzudin (2007) Generate High Frequency Mechanical Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohd Azmi (2010) System Development Of An Initiation Sequence Using Face Recognition Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Ab Halim (2008) Analysis And Flexural Strength Of Mullite-Bonded Silicon Carbide Fabricated Using Various Uniaxial Mechanical Pressure And Milling Duration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ghazali , Zulcefli Muhammad (2009) The Investigation Of Effect Of The Capillaryty On The Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim and Soo, Yew Guan and Radi Husin, Ramlee (2013) Physiological Using FGPA In Health Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Afiq Syazwi (2016) Optimization Of Process Condition On Loading Degree Of Magnetic Composite Sheet By Lumen Loading Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Mohd Jahari and Shahrum Shah, Abdullah and Khairul Azha, A. Aziz (2010) Vertical motion controller design of an underwater vehicle. In: 3rd International Conference on Underwater System Technology: Theory and Applications 2010 (USYS'10), 1st & 2nd November 2010, Cyberjaya.

Ahmad Radzi, Syafeeza and Hani, Mohamed Khalil and Hindustan, Imran and Mat Ibrahim, Masrullizam and Wong, Yan Chiew (2015) Generalizing Convolutional Neural Networks For Pattern Recognition Tasks. ARPN Journal Of Engineering And Applied Sciences, 10 (12). pp. 5298-5308. ISSN 1819-6608

Ahmad Radzi, Syafeeza and Hani, Mohamed Khalil and Liew, S. S. and Bakhteri, Rabia (2015) Convolutional Neural Networks With Fused Convolution/Subsampling Layers Applied To Face Recognition. International Journal of Computational Intelligence and Applications, 14 (3). pp. 1-19. ISSN 1469-0268

Ahmad Sabri, Zahari (2015) Effect Of Surface Roughness On Hydrogen Gas Production Rate In Alkaline Electrolyser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shahril, Razali (2011) Effect Of Size Of Bolt On The Relative Critical Slippage Of Bolt-Nut Joint Under Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syafiq, Baharin (2009) Experimental Modal Analysis On Flexible Plate Structure Using Forced Vibration Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazili, Md Din (2015) Investigation On The Effect Of Machining Strategies On The Surface Finish And Dimensional Accuracy Of Five-Axis Flank Machining Of Curvy Angled Shapes (CONVEX). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syukry, Ismail (2014) Effect of bentonite and spent bleach earth (SBE) addition on the sintered properties of glass waste composite. Project Report. UTeM. (Submitted)

Ahmad Yusri, Yaacob (2006) Implementation Of Image Enhancement Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zulhelmi, Ab Hamid (2010) Cooperative Space-Time Block Coding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Saeed, Ali Saeedan (2015) A Study Of Pre-Travel Variation Of Coordinate Measuring Machine With Different Stylus Configurations. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Azlan, Ahmad Zamri (2008) Laminar Natural Convection In Enclosure Containing Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Fathihah, Mohamed Yusoff (2015) The Effect Of Fibre Size, Fibre/Matrix Interphase Adhesion And Fibre Loading On Mechanical Properties Of Bio Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aini , Ahmad (2009) Seedling Diameter Measurement With Application Of Infrared. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aini Rahayu, Md Khirom (2015) Structural Characterization Of HgSe2 Thin Films By Electrochemical Route. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah , Mazelan (2010) Effect Of Re-solution Heat Treatment Temperature On The Impact Toughness Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishatul Rodhiah, Mohamad (2009) The Study Of Rings Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisyah, Sharum (2015) Tailor Orbital Welding On Aluminium Alloy 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aizat, Mohamed Ali (2008) Measurement And Evaluation Of The Reverberation Time For Classrooms In UTEM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akhmal Hakim , Hakimi (2014) Complex additives influence of NiTe2 thin film synthesize by electrodeposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al , Munawir (2014) A corrected model of statistical energy analysis (SEA) in a non-reverberant acoustic space. Masters thesis, UTeM.

Al-Amani, Umar and Ahmad Fauzi , Mohd Noor and Yusliza, Yusuf and Nooririnah, Omar and Noraiham, Mohamad (2015) Effect of neodymium and samarium on the properties of bismuth titanate ceramics. Applied Mechanics and Materials, 761. pp. 397-401. ISSN 1662-7482

Al-Khafaji, Omar Abdul Hassan Lafta (2016) Lateral Crushing Of Circular Ring Tube Under Quasi-Static Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Melt Pool And Single Track Formation In Selective Laser Sintering Selective Laser Melting. Advanced Materials Research, 933 (-). pp. 196-201. ISSN 1662-8985

Alyaa Izzati, Hashim (2010) Study And Preliminary Design Of High Speed Impact Test Machine Using Hopkinson Bar Test Principle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameyrullah, Arshad (2007) Merekabentuk Dan UjIkaji Penunjuk Paras Kandungan LPG Di Dalam Selinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminudin , Aman (2013) New leakage current parameters for newly developed polymeric composite optimized by response surface methodology. PhD thesis, UTeM.

Amir , Fahruroji (2006) A Study Of Square Ring Under Lateral Compression Using Experimental And Finite Element Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Farhan, Maarof (2011) Development Of Car Door Lock Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Fizal, Amir Razauddin (2015) Analysis On Effect Of Coconut Fibre Towards Impact Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Zaid, Baharudin (2009) Penyerapan Tenaga Oleh Keluli Lembut Di Bawah Hentaman Kuasi-Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Hakimi , Mohd Zain (2014) Physical properties and energy absorption of epoxidized natural rubber/reclaimed rubber foam. Project Report. UTeM, UTeM. (Submitted)

Amirul Ramzani, Radzid (2015) Removing Al-Quran Illumination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ammar, Abd Rahman (2006) Application of TRIZ in solving project management principles in a product development project. Masters thesis, Technische Universitat Berlin.

Ammer Ezhar, Mohd Razalli (2015) Fatigue Analysis Of Steering Knuckle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amzar Hijazi, Shubli (2011) Analysis Of Mechanical Properties Of Inorganic Adhesive Based Composite Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anand, T Joseph Sahaya and Mohd Abid, Mohd Asyadi 'Azam and Subramonian, Sivarao and Buang, Zolkepli and K M Rajan, Rajes and Mat Yusoff, Nurul Hazliza and Abdul Aziz, Mohd Zaidan and Chua, Kok Yau (2015) Hrtem Studies Of Magnetron Sputtered Ni4al Thin Films. Applied Mechanics and Materials, 761 (-). pp. 504-509. ISSN -

Anas Mujahid, Mohammad Khair (2013) Mechanical Behaviour & Water Absorption Of Metal Matrix Composite (TN+Rice Husk) Fabricated Via Permanent Mould Casting - ( Experiment with 10% And 25% Of Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andrew , Arih (2007) Stress And Deformation Analysis On PCB Depaneling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Andy, Low Foo Hwa (2015) Face Recognition Using Principal Component Analysis With Support Vector Machine Classifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Soon Chang (2013) Design And Development Of Tactile Detection By Using RFID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Kuan Kee (2015) Vehicle Detection And Counting From Unmanned Aerial Vehicle (UAV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, TeohOng and Ibrahim, Zulkifilie and Ramli, Suzaimah (2014) Computer Machine Vision Inspection On Printed Circuit Boards Flux Defects. American Journal of Engineering and Applied Sciences, 6 (3). pp. 263-273. ISSN 1941-7020

Ang Wei, Yih (2012) Data Acquisition System For Solar Panel Monitoring. Project Report. UTeM, Melaka Malaysia. (Submitted)

Aninorbaniyah, Bairan (2013) The effects of carbon nanotube on the properties of graphite-carbon black-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Anis Nabila, Mohd Ismail (2015) Synthesis And Optical Characterization Of Mercury Diselenide (HgSe2) Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anis Niza, Ramani (2013) Design and Analysis Electrical Energy form Clay Soil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anna Marie , Almodiel (2008) Study On Fracture In Low Carbon Steel Using Bend Specimen With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar , Mohamed Kassim (2010) Moving Control of Quadruped Hopping Robot Using Adaptive CPG Networks. In: 2010 IEEE Conference on Robotics Automation and Mechatronics (RAM), , June 28-30 , 2010, Singapore.

Anuarulnam, Ramli (2013) Counterfeit Banknote Detection & Counting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar Naimi, Arsat (2015) Study On The Properties Of Parts Manufactured Using Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arbain, Nur Atikah (2016) Improving Triangle Geometry Shape Features Through Triangle Points Selection In Digit Recognition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arham Syafiq , Azmi (2013) Mechanical properties of polyperties of polypropylene filled wood fiber composites. Project Report. UTeM. (Submitted)

Arief Ezmee , Jumodi (2008) Infrared Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Arieff Ridzwan, Yussuff (2011) Synthetic Hybrid Laminate Composite Using Recycled Plastic Bag For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arika, Aris (2005) Development Of Electronic Machanical Design System (E-MechSys) For Consultancy Services : Plumbing And Sanitary Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arith, Faiz and Amin, Nowshad and Chelvanathan, Puvaneswaran and Idris, Idzdihar (2014) Prospects of molybdenum thin film for solar cell application from AFM analysis. Australian Journal of Basic and Applied Sciences, 8 (2). pp. 87-92. ISSN 1991-8178

Arith, Faiz and Mustafa, Ahmad Nizamuddin and Idris, Idzdihar and Abdul Latiff, Anas and Toshio, Katsuyama (2014) Effects of exciton-polariton on Mach-Zehnder interference devices. Research Journal of Applied Sciences, Engineering and Technology, 7 (15). pp. 3044-3048. ISSN 2040-7459

Asfaezuddin , Zakaria (2009) Analisa Perpindahan Data Model Surface Di Antara Platfom CAD Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmala, A. (2013) Classification Simulation of RazakSAT Satellite. Procedia Engineering , 53. pp. 472-482. ISSN 1877-7058

Asri Khalid, Mohd Subari (2014) 3D Reconstruction Image Using Single Low Resolution Web Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyadi Azam, Mohd and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko and Shimoda, Tatsuya (2010) Controlling the growth of vertically aligned single walled carbon nanotubes from ethanol for electrochemical supercapacitor application. In: 8th International Symposium on New Materials for Electrochemical Systems, 11-15 July 2010, Shanghai, China.

Asyadi Azam, Mohd and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko (2010) Controlling the growth of single-walled carbon nanotubes using alcohol catalytic CVD method. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Asyadi Azam, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Aluminum Oxide Support Layer for Vertical Growth of Single Walled Carbon Nanotube using Alcohol Catalytic CVD Technique. In: The Fifth International Conference on Advanced Materials and Nanotechnology (AMN-5), 5-13 February 2011, Wellington Convention Centre, Wellington, New Zealand.

Asyadi Azan, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Directly grown vertically aligned single-walled CNTs on conducting substrate as electrode material for electrochemical capacitor. In: 219th Electrochemical Society Meeting, 1-8 May 2011, The Montreal Convention Center (Palais des Congrès de Montréal), Montreal, Quebec, Canada.

Ayob, Muhammad Amirul Shafiq (2016) Experimental Investigation Of Front Sprocket Failure Of Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayu Natasya , Kasim (2013) Effects of bf length on the properties of bamboo/polypropylene composite. Project Report. UTeM. (Submitted)

Azaimmy , Maksid (2009) Kajian Kegagalan Statik Dan Lengkokan Ke Atas Menara Penghantaran Elektrik Dan Kaedah Analisis Unsur Terhingga Menggunakan Perisian Berkomputer MSC/NASTRAN-PATRAN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azane Azran, Mohd Latif (2006) A Study On The Annealing Process Of Aluminium Bronze Alloy Based On Their Microstructure Growth And Mechanical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana, Md Yusop (2006) Input Shaping For Vibration-Free Positioning Of Flexible Systems. Masters thesis, Universiti Teknologi Malaysia.

Azfar Nazmi , Nikmatlah (2010) Validation Of Bar Vibration By Using FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Anuar (2015) Penyiasatan Perambatan Gelombang Akustik Terhadap Lapisan Konkrit Struktur Bertetulang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azianashima Heedayu, Zainal (2009) New Design Using Fiber Glass Composite (FRPC) For Jimny Back Door. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azim, Aziz (2013) The effect of cooling rate on mechanical and morphological properties of heat treated recycled aluminum alloy from scrap. Masters thesis, UTeM.

Azis, Nurul Atikah (2015) Study Of Coating Properties For Aircraft Aluminum Alloy Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039

Aziz, Azrull (2016) Monitoring And Determination Of The Appropriate Equivalent Cylinder Radius For Axially Compressed Steel Cone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Khairul Azha A (2011) Real-time face recognition system using radial basis function neural networks. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Azizuddin, Abdul Aziz (2009) Kekuatan Gentian Kaca Berlamina. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azlinda, Mohd Nor (2008) Flame Imaging Using Ultrasonic Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Mohd Fairus Firdaus (2012) Flow Modelling Of Nasal Cavity With Various Flow Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Mohd Sanusi and Muda, A. K. (2011) Digital Paleography: Using the Digital Representation of Jawi Manuscripts to Support Paleographic Analysis. In: IEEE - 2011 International Conference on Pattern Analysis and Intelligent Robotics, 28-29 June 2011, Putrajaya, Malaysia.

Aznizam , Abdullah (2014) Design and finite element analysis of interference press-fit aluminium nut. Masters thesis, UTeM.

Azri Safwan, Abdul Halim (2011) The Effects Of Metal Inert Gas (MIG) Process Condition On Hardness Of Stainless Steel Claddings Of A Carbon Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azuan , Abdul Aziz (2008) Optoelectronic PH Meter With Display. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azwarni, Mohamad (2009) Effective Implementation Of Process Capability Index Cpk In Minimizing Reject Rate For Batch Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

ahmad kamely, mohamad and Sachlan, Ermansyah and Sivarao, Subramonian (2011) PREDICTION OF THE BENDING STRENGTH USING RESPONSE SURFACE METHODOLOGY. Curran Associates, Inc, 57 Morehouse Lane ,Red Hook, NY 12571 USA , United State. ISBN 978-1-4577-0005-7

ahmad kamely, mohamad and mohd yusuf, noordin (2011) The Impact of Cutting Tool Materials on Cutting Force. World Academy of Science, Engineering and Technology, 75. pp. 904-907. ISSN 1307-6884

B

Bachok, Muhammad Yusuf Khatir (2014) Passenger Satisfaction On Information Towards The ITS Components Of Rapid Kuantan Bus Service. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badr Kamoon, Dabis (2013) Laser processing of linear bevel cutting. Masters thesis, UTeM.

Bakar, N. and Ishak, N. H. and M. Lani, S (2012) Analysis on using 3D approach in learning for Electromagnetic Theory (3D-EmT). In: International Call On Active Learning 2012, 18/9/2012 - 20/9/2012, UTeM.

Bani Hashim, Ahmad Yusairi and Noor Azuan , Abu Osman and Wan Abas, Wan Abu Bakar and Abdul Latif , Lydia (2011) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, x (x). pp. 1-7. ISSN 0307-904X (In Press)

Basar, M.F.M. and M.R., Sapiee and Hishamudin, L.M. and Zakaria, N. and Yusof, N.M and Wahid, N. (2010) A Study on the Wind and Geothermal as a Potential of Renewable Energy Sources in Malaysia. In: ICEI2010 - THE 2ND INTERNATIONAL CONFERENCE ON ENGINEERING AND ICT, 18-20th February 2010 , Melaka.

Basar, Mohd Farriz and M. R., Sapiee and Rahman, Syukri and Hamdan, Zulfiqah and Borhan, Shuhada and Sopian, Kamaruzzaman (2014) Cost Analysis of Pico hydro Turbine for Power Production. AENSI Advances in Environmental Biology, 8 (14). pp. 147-151. ISSN ISSN-1995-0756

Basari, Amat Amir (2006) Modeling and control of nonlinear active suspension system using a backstepping technique. Masters thesis, Universiti Teknologi Malaysia.

Basari, Amat Amir and Sosuke, Awaji and Seiji, Hashimoto and Shintaro, Sakamoto and Bunji, Homma and Kenji, Suto and Hiroaki, Okada and Hideki, Okuno and Kojiro, Kobayashi and Shunji , Kumagai (2015) The Effect of the Parameters of a Vibration-Based Impact Mode Piezoelectric Power Generator. Shock and Vibration, 2015. pp. 1-10. ISSN 1875-9203

Basari, Amat Amir and Sosuke, Awaji and Song, Wang and Seiji, Hashimoto and Shunji , Kumagai and Kenji, Suto and Hiroaki, Okada and Hideki, Okuno and Bunji, Homma and Wei, Jiang and Shuren, Wang (2014) Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation. Journal of Power and Energy Engineering, 2014 (2). pp. 117-124. ISSN 2327-5901

Bilge, Pinar and Abdul Rahman, Azrul Azwan (2014) A case study material flow simulation based analysis for maintenance network improvement. Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 1985-3157 July-December 2008

Birang, Katerina (2016) Formation Of Cobalt Doped Zinc Oxide Photocatalyst For Synthetic Methyl Orange Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bistamam, Mohd Shahril Amin and Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2017) Surface Interaction Between Carbon Patches And Catalyst Nanoparticle As The Key Factor In Aligned Carbon Nanotube Growth Using Alcohol Catalytic CVD. NANO : Brief Reports and Reviews, 12 (1). 1750012-1-1750012-9. ISSN 1793-2920

Bohari, Zul Hasrizal and Jali, Mohd Hafiz and Baharom, Mohamad Faizal and Mohd Nasir, Mohamad Na'im and Jaafar, Hazriq Izzuan and Wan Daud, Wan Mohd Bukhari (2014) EMG signal statistical features extraction combination performance benchmark using unsupervised neural network for arm rehab device. International Journal of Applied Engineering Research, 9 (22). pp. 12393-12402. ISSN 0973-4562

C

Carvyn, Blaise (2015) A Fibre Optic Sensor On Acetone Concentration Detection Using Beam-Through Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Horng Tat (2010) Study On Haar Classsifier For Machine Learning System That Can Detect Specified Object In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Xin Zhi (2012) Laser Range Finder Scanning System For Tree Diameter And Circumference Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Alan Kah Poh (2008) The Study Of The Effects Of Surface Roughness Of Loggerhead Sea Turtle Shell In Relation To Drag Coefficient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Siang Yee (2008) The Compatibilizing Effect of Coupling Agent on the Morphological Properties of Banana Fibre as Reinforcement for Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang , Hin Fuat (2008) A Study Of Corrosion Behaviour Of Aircraft Components Material : Anodized Aluminium 2024-T3. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chang , Weng Soon (2008) Corrosion Behaviour Of Steel For Simulated Concete In Choride Aqueous Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Musa, Muhammad Faiz (2016) Fatigue Life Simulation Of Spot Weld Joint Structure Based On Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Yee Mun (2013) Modelling and experimental investigation on perforated plate mobility. Project Report. UTeM, Melaka. (Submitted)

Cheah, Yee Mun (2016) Modeling Of Vibration Transmission And Prediction Of Structure-Borne Noise In Buildings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chee, Jiann Tong (2010) Develop A Rotating Speed Sensor System With Link To Visual Basic.Net. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chen, Wei Keat (2014) Effect of substrate surface condition on thermal cycling behavior of lead-free solders. Project Report. UTeM. (Submitted)

Cheng, S.Y. (2007) The Effect of Building Shape Modification on Wind Pressure Differences for Cross-ventilation of a Low-Rise Building. International Journal of Ventilation. pp. 167-176. ISSN 2044-4044

Cheng, S.Y. and Mat Yamin, Ahmad Kamal (2008) EFFECT OF SURFACE ROUGHNESS ON DRAG OF LOGGERHEAD CARAPACE. Jurnal Mekanikal. pp. 37-48. ISSN 2289-3873

Cheng , Yuan We (2008) Tensile Properties And Morphology Studies Of Polymeric Biocomposite. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Cheng Hwai, Aw (2006) A Study On Precipitation Hardening Of 6061-T6 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and RAFAN, NUR AIDAWATY and Abdullah, Lokman (2013) Identification of Friction Models for Precise Positioning System in Machine Tools. Procedia Engineering , 53 (1). pp. 569-578. ISSN 1877-7058

Chong, Shin Horng (2003) Hardware Development of Electrical Capacitance Tomography Applying AC - Based Concept. Masters thesis, Universiti Teknologi Malaysia.

Chong, Kuan Eng and . Oma, Mohamed K and Abu Bakar, Nooh (2008) Solving Assembly Line Balancing Problem using Genetic Algorithm with Heuristics- Treated Initial Population. In: World Congress on Engineering 2008, 2-4 July 2008, Imperial College, London.

Chong, Kuan Eng and Lim, Ke Sin (2013) CONWIP based Control of a Semiconductor End of Line Assembly. Procedia Engineering , 53. pp. 607-615. ISSN 1877-7058

Chong, Meng Mun (2015) Development Of CNT/SiO2 Fillers Reinforced Polyester Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Choong, Mei Teng (2015) Influence Of Additives On Sol-Gel Nanoporous TiO2 Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chung, Soon Thien (2011) Cough Noise Suppressor For Video Conferencing (An Image Processing Approach). Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Danial , Azmi (2012) Real Time Infra-red Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dayang Kartikasari, Abang Abdullah (2009) Mechanical Properties Of Wood Plastic Composite Made Of Recycled Polypropylene And Recycled Wood Flour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Devan, Sanmugam (2015) Springback Deformation Measurement Of Composite Using 3D Scanner After Curing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dhar Malingam, Sivakumar and Ng, L. F. and Lau, S. M. and Lim, K. T. (2017) Fatigue Life Behaviour Of Glass/Kenaf Woven-Ply Polymer Hybrid Biocomposites. Journal of Polymers and the Environment, 25 (98). pp. 1-11. ISSN 1566-2543

Dhar Malingam, Sivakumar and Ng, L.F and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2016) Investigation On Fatigue Life Behaviour Of Sustainable Bio-Based Fibre Metal Laminate. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 1. pp. 141-156. ISSN 2180-1053

Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Said, Radzai and Subramonian, Sivarao (2016) A STUDY ON IMPACT BEHAVIOUR OF A NOVEL OIL PALM FIBRE REINFORCED METAL LAMINATE SYSTEM. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

Dhar malingam, Sivakumar and KalyanaSundaram, Shankar (2013) Temperature Effect on Forming of Self- Reinforced Polypropylene Based Lightweight Metal Composite Structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811

Dhar malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A Study On Impact Behaviour Of A Novel Oil Palm Fibre Reinforced Metal Laminate System. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 2483-2488. ISSN 1819-6608

Dila Afnida, Azman (2010) Feasible Study On Characterization And Comparison Of Accelerated Life Tests And The Compatible Software For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Din, Abdul Talib and Zaidi, Zairul Fazura (2011) THE STUDY ON THE SOIL HEAT TRANSFER CHARACTERISTICS FOR THE DEVELOPMENT OF A COST-SAVING UNDERGROUND AIR COOLING SYSTEM. In: The 5th PSU-UNS International Conference on Engineering and Technology (ICET-2011), 2 , 3 May 2011, Phuket, Thailand.

Dzul Fitry, Ismail (2007) Investigation Of Microstrip Parallel Coupled Bandpass Filter For GPS Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulhusni, Othman (2011) Analytical Study On Control Of Buckling Lobe Onset For Hollow Circular Tube Under Axial Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulkafli, Siti Dzulaika (2016) To Analyse The Works Body Posture In Phn Industry Sdn Bhd Using Rula Assessment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Edynoor , Osman (2014) Hygrothermal effect on hybrid composite by using filement winding process. Masters thesis, UTeM.

Eh, Zheng Yi (2016) Design And Development Of A License Plate Recognition System Using Convolutional Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ehsan, Abu Bakar (2015) Effect Of Surfactant On EDM Of Low Conductivity Reaction-Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elfirah, Ab. Rahman (2009) Reverse Engineering Application In The Development Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliyana Sari, Sumaidy (2015) Ergonomic Design Approach To Enhance The Labor Productivity In Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyas, Talib (2009) The Mechanical Properties And Morphology Study Of The Silica-PE Composite Using Modified Silica. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elysa Sakinah , Md. Amin (2013) Development Of Image Filtering System For Car Sticker Detection. Project Report. UTeM, Melaka. (Submitted)

Elzamly, Abdelrafe and Hussin, Burairah and Abu Naser, Samy S. and Doheir, Mohamed A. S. (2015) Classification Of Software Risks With Discriminant Analysis Techniques In Software Planning Development Process. International Journal of Advanced Science and Technology, 81 (-). pp. 35-48. ISSN 2005-4238

Elzamly, Abdelrafe and Hussin, Burairah and Abu Naser, Samy S. and Doheir, Mohamed A. S. (2015) Predicting Software Analysis Process Risks Using Linear Stepwise Discriminant Analysis : Statistical Methods. International Journal Of Advanced Information Science And Technology, 38 (38). pp. 108-115. ISSN 2319-2682

Eng, Poh Hwa (2011) The impact of facebook design features on popularity of the photography facebook pages. Masters thesis, UTeM.

Eng, Wei Sy (2013) Merging Of Writer Identification Technology Into Mobile Application For Forensic Document Handwriting Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esma Niza , Nawi (2007) Pembangunan Aloi Aluminium Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah (NDT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Esmar, Budi (2010) Modeling Of Reactively Sputtered TiAIN Coating On Tungsten Carbide Insert Tool : Its Properties And Cutting Performance In Dry Turning Of AISI D2 Steel. PhD thesis, UTeM.

Esmie Khalik Mohamad, Ismail (2008) Vibration - Free Positioning Of Flexible Systems Using Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fairuz Fadzly , Nawawi (2006) Multiple Infrared Sensing Developments. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairuz Fazillah, Shuhimi (2013) The effects of stainless steel on the properties of graphite-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Fairuzah, Abu Samah (2007) Kajian Kelesuan Ke Atas Logam Dengan Menggunakan Beban Lenturan. Project Report. UTeM, Melaka. (Submitted)

Faisal, Mohamad Fadli (2016) Human Pedestrian Detection For Surveillance System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Faiz Redza , Ramli (2005) Rapid Manufacturing Of Knee Implant. Masters thesis, The University of Liverpool.

Fara Adillah, Che Idris (2009) Design And Analysis Of Floating Pump Platform Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nadirah, Alias (2008) Pengawal Letak Kereta Ultrasonik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahilda, Masekam (2009) Mapping Corrosion Activities Of Various Concentration Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin and Zulkarnain, Zainuddin and Yusmarnita, Yusof and Puteri Suriyani, Megat Wazir (2010) Develop Angular Speed Detection System Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faridah, Omardin (2009) A Study Of Project Management Based On Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fariza Fuziana, Yacob (2015) Mechanical Properties Of Recycling Chip Aluminium 7075 Through Powder Metallurgy Technique. Masters thesis, Universiti Teknikal Malaysia Melaka..

Farizul Muiz, Alias (2015) Comparative Study Of Electronic Properties In Pristine And Si-Doped Single-Walled Carbon Nanotube As Gas Sensor: A First Principle Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatehah Hanim, Ahmad Othman (2013) Forecasting Plant Vigor Through Vegetation Index Mapping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Aida Aqila, Zakaria (2015) The Human Analysis And Ergonomics For The Seat Design Of Electric Buggy (Driver Seat). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Azrin, Muhammad Efandi (2014) Design And Simulate Nanofiber Laser Using Microwave CST. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nur Athirah, Dol Malek (2015) The Effect Of Interfacial Bonding In The Mechanical Properties Of Degradable Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Ramly (2009) Functional Testing And Develop Customer Xperience Solution ( CXS ) Test Procedure For Cubic Electronic Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauziyah, Salehuddin and Ahmad, Ibrahim and Fazrena, Azlee Hamid and Azami , Zaharim (2011) Influence of HALO and source/drain implantation on threshold voltage in 45nm PMOS device. Australian Journal of Basic and Applied Sciences, 5 (1). pp. 55-61. ISSN 1991-8178

Fauziyah, Salehuddin (2009) Application of Taguchi Method in Optimization of Gate Oxide and Silicide Thickness for 45nm NMOS Device. International Journal of Engineering & Technology, 9 (10). pp. 94-98. ISSN 2077-1185 (Online) 2227-2712 (Print)

Fauziyah, Salehuddin (2010) Impact of SALICIDE and Source/Drain Implants on Leakage Current and Sheet Resistance in 45nm NMOS Device. Journal of telecommunication, electronic and computer engineering , 2 (1). pp. 35-41. ISSN 2180-1843

Fauziyah, Salehuddin (2011) Optimization of Process Parameter Variability in 45 nm PMOS Device using Taguchi Method. Journal of Applied Sciences, 11 (7). pp. 1261-1266. ISSN 1812-5654

Fauziyah, Salehuddin and Mardiana, Bidin and Hazura, Haroon and Zahariah, Manap (2009) Online Signature Verification System. In: Signal Processing & Its Applications, 2009. CSPA 2009. 5th International Colloquium on, 6-8 March 2009, Kuala Lumpur, Malaysia.

Fauziyah , Salehuddin (2011) Optimization of input process parameters variation on threshold voltage in 45 nm NMOS device. International Journal of Physical Sciences, 6 (30). pp. 7026-7034. ISSN 1992-1950

Fazrie , Zamri (2005) Thermal Stress Analysis For Brake Pad. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Ferda , Ernawan (2014) An efficient psychovisual threshold technique in image compression. PhD thesis, UTeM.

Fiona, Shim May Fa (2015) Fabrication And Mechanical Analysis Of Spent Tea Leaf Materials For Sound Absorption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Abdullah, Hashim (2006) Reverse Engineering Of An Ergonomic Office Chair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fleschutz, Timo and Abdul Rahman, Azrul Azwan and Harms, Robert and Seliger, Günther (2010) Assessment of Life Cycle Impacts and Integrated Evaluation Concept for Equipment Investment. In: 17th CIRP International Conference on Life Cycle Engineering (LCE 2010), 19-21 May 2010, Hefei, Republic of China.

Foo, Lin Hui (2015) Effect Of Coating Thickness On Roof Top Thermal Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Yeong Horng (2016) Optical And Photoelectrochemical Studies Of Tungsten Sulphoselenide (Wsse) Thin Films For Solar Panels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Gakim, Miron (2009) Study Of Structure, Microstructure And Corrosion Properties Of AISI 304 Toward Marine Specification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Bee Geok (2010) Mechanical And Thermal Properties Of Pure Nickel As An Alternative Automotive Body Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Kok Hway (2009) Application Of Triz Methodology In Casting Process : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Puoh Yoon (2015) Quality Investigation Of Laser Processed Silicon Wafer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ganesh Kumar , Krishnan (2009) To Investigate Effect of Strengthener Variation in Mechanical Properties of Metal Matrix Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gannapathy, Vigneswara Rao and Suaidi, Mohd Kadim and Johal, Muhammad Syahrir and Fayeez, Ahamed Tuani Ibrahim and Siva Kumar, Subramaniam and Ranjit, S.S.S. (2012) An Efficient Medium Access Control (MAC) Forwarding Technique for Multihop Network. In: PSU-USM International Conference on Art and Sciences 2012, 2nd - 4th December 2012, Bay View Resort, Penang.

Gannapathy, Vigneswara Rao and Subramaniam, S.K. and Esro, Mazran and Ranjit, S.S.S. and Suaidi, Mohd Kadim (2012) Intelligent Health Monitoring System (IHMS) Using Wireless ZigBee Technology. In: Prosiding Seminar Hasil Penyelidikan Kementerian Pengajian Tinggi Jilid III ICT dan Kejuruteraan, 8th to 9th November 2012, AKEPT, Bandar Enstek.

Go, Sook Huey (2008) The Mechanical Properties And Morphology Study Of The Silica-Reinforced Polyethylene (PE) Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Jzun Hwee (2012) Modelling Of Non-Reverberant Acoustic Space Using Statistical Energy Analysis (Sea). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Zia Huey (2013) Performance Characterization Of Photo Materials Used In Silicon Technology Fabrication Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Chia Min (2015) Application Of Integrated Analytic Hierarchy Process (AHP) And Technique Of Order Preference By Similarity To Ideal Solution (TOPSIS) In Material Selection For Automotive Fender Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Chun Hsien (2015) Effect Of Gelcoat Thickness On Laminate Composite Structure And Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goo , Chay Shuen (2011) A Study On The Corrosion Behavior Of Welded 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Guat Peng , Ng (2014) Creep assessment of overheated grade 9Cr steels for decision making on plant integrity. EngD thesis, UTeM.

Gwee, Chiou Chin (2013) The performance of tool holder clamping technique in conventional lathe with passive damping system. Masters thesis, UTeM.

H

H'ng, Zhuang Wei (2013) Design Of Operational Counting Device. Project Report. UTeM, Melaka. (Submitted)

HARUN, Mohd Hanif and WAN ABDULLAH, Wan Mohd Zailimi and JAMALUDDIN, Hishamuddin and ABD RAHMAN, Roslan and Khisbullah , Hudha (2014) Dynamic Response of Commuter Rail Vehicle under Lateral Track Irregularity. Applied Mechanics and Materials, 548-54. pp. 948-952. ISSN 1662-7482.

Habibullah, Akbar and Anton Satria, Prabuwono (2008) Automated visual inspection (AVI) research for quality control in metal stamping manufacturing. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), 17 - 19 November 2008, UNITEN, Malaysia. (Submitted)

Hafiz, Mohd Salleh (2009) Study On Design Of Workstation Meeting Ergonomic Requirement For CADCAM Laboratory In FKP, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizuddin, Sharingat (2015) Wear Debris Detection And Analysis Of Automotive Engine Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Isa and Omar, Noor Rawaida and Kamat, Seri Rahayu and Abdullah, Rohana and Saptari, Adi and Othman, Mohd Shahrizan (2014) Analysis Of Muscle Activity Using Surface Electromyography For Muscle Performance In Manual Lifting Task. Applied Mechanics and Materials, 564. pp. 644-649. ISSN 1660-9336

Halimah , Abd Halim (2010) Design Improvement On Trimming Workstation For Aerospace Company Based On Ergonomics Analysis (Case Study at CTRM AC Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Rostam Affendi and Ibrahim, Haidi and Abu Hassan, Anwar Hasni (2016) Stereo Matching Algorithm Based On Illumination Control To Improve The Accuracy. Image Analysis & Stereology, 35 (1). pp. 39-52. ISSN 1580-3139

Hamzah , Syamsulrizal (2009) The Fracture Mechanic On The Spot Welded Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzaitul Akmarizal, Hamdan (2011) Evaluation Of Mechanical Properties Of Inorganic Based Composities Adhesive By Experimental Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanizat, Nurhidayah (2016) A Study To Design And Fabricate A Prototype Of River Trash Collector System (RTCS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Sahbudin, Saari and Majlis, B.Y and Menon, P.S (2012) Performance of Optical Wavelength Demultiplexer based on Silicon- on- Insulator (SOI) Microring Resonators (MRRs). Advanced Materials Research, 378-379. pp. 549-552. ISSN 1662-8985

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Sahbudin, Saari and Menon, P.S (2012) Process Modeling, Optimization and Characterization of Silicon <100> Optical Waveguides by Anisotropic Wet Etching. Advanced Materials Research, 403-408. pp. 4295-4299. ISSN 1662-8985

Haroon, Hazura and Menon, P.S and Majlis, B.Y and Hanim, Abdul Razak and Mardiana, Bidin and hasanah, lilik and B., Mulyanti and D., Mahmudin and G., Wiranto (2010) Modeling of SOI-based MRR by Coupled Mode Theory using Lateral Coupling Configuration. In: IEEE International Conference on Semiconductor Electronics, 2012, 19-21 September, 2012, Kuala Lumpur.

Haroon, Hazura and Khalid, Siti Sarah (2017) An Overview Of Optical Fiber Sensor Applications In Liquid Concentration Measurements. Journal Of Advanced Review On Scientific Research, 36 (1). pp. 1-7. ISSN 2289-7887

Harun, Mohamad Haniff (2013) A THREE DIMENSIONAL (3D) VISION BASED DEFECT INSPECTION SYSTEM FOR GLUING APPLICATION. Masters thesis, Universiti Teknikal Malaysia Melaka (UTeM).

Harun, Mohamad Haniff and Sulaiman , Marizan and Hairol Nizam , Mohd Shah (2011) Shape-Based Matching: Application of Defect Detection. In: Proceesings of Malaysian Technical Universities International Conference on Engineering and Technology (MUICeT 2011), 13-15 November 2011, Batu Pahat, Johor.

Harun, Mohamad Haniff and Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2011) Shape-Based Matching: Application of Edge Detection using Harris Point. In: Proceedings of International Conference on Robotic Automation System (ICORAS 2011), 23-24 May 2011, Kemaman, Terengganu.

Harun, Nurfarahani (2016) Hybrid Vehicle (HV) Engine Vibration Sources Detection And Identification Using Time-Frequency Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Hassan, Attan and Mohd Soufhwee, Abd Rahman (2012) Nitrogen Gas Partial Pressure Control Effects on Titanium Nitride Coating’s Thickness and Colour over Tungsten Carbide Substrate using PVD. In: IDECON2012, 15-16 October 2012, Melaka.

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Mohd Soufhwee, Abd Rahman (2013) Surface Energy and Crystallite Size Comparisons by Applying Direct Current and Pulse Direct Current on Substrate Bias in PVD Process. Surface Energy and Crystallite Size Comparisons by Applying Direct Current and Pulse Direct Current on Substrate Bias in PVD Process, 315 (doi:10). pp. 98-102. ISSN 1660-9336

Hassan, Mohsin A. (2016) Structural Analysis Of Shape-Morphing Aircraft Slat By Using Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hayati Mukti , Asih (2014) Mixed-load machine utilization improvement and transfer batch size optimization using hybrid simulation approach. Masters thesis, UTeM.

Hazirah, Zakaria (2014) Face Recognition Using Eigenfaces Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazlinda , Kamarudin (2014) Effect of grog addition on local clay ceramic properties using extrusion method. Masters thesis, UTeM.

Hazman , Hasib (2006) Development Of Structuring Anthropometric Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Heng, Zheng Wang (2015) Fatigue And Fracture Behavior Of Al-Alloy Plates With U And V Notches Subjected To Fatigue Loadings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Jing Wen (2015) Cyclic Voltammetry Analysis Of HgSSe Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husin, Mohd Amirhafizan (2016) Effects Of Fiber Reinforcements Weave Patterns On The Mechanical Properties Of Hybrid Intraply Lamina. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hussein, Nur Izan Syahriah and Rasidi, Mohd Kamarul Shaufi and Ayof, Mohd Nizam (2015) Experimental Methods For NICRBSI-WC Cladding On Gray Cast Iron Trim Cutter Die. APPLIED MECHANICS AND MATERIALS, 761. pp. 298-302. ISSN -

Hussein, Turki Diwan (2013) Laser processing of non-linear incline cutting. Masters thesis, UTeM.

I

Ibrahim, Asriana (2017) Modeling Of Dynamic Behavior In Closed Crack And Nonlinear Ultrasonic Array Imaging. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Noor Haya (2016) Preliminary Study On Elastic Profile Of Mix Coconut Fibre And Polyester Resin As Composite Fibre Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idawati , Hatib (2008) Design And Development Of PC Based Software For Time & Frequency Domain. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ifayefunmi, Olawale (2014) A survey of buckling of conical shells subjected to axial compression and external pressure. Journal of Engineering Science and Technology Review , 7 (2). pp. 182-189. ISSN 1791-2377

Iffa Marina , Jopri (2013) Effect of heat treatment on the microstructures and mechanical properties of high carbon steel. Project Report. UTeM, Melaka. (Submitted)

Iffah Nafisah, Ibrahim (2015) Human Analysis And Ergonomics Of An Electric Bicycle Seating Posture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Illy Salwana, Abd Razak (2009) The Study Of Cylindrical Tube Under Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Mohd. Nor, Husain (2010) Design And Development Of Low Cost Anechoic Chamber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Salafinas, Ahmad (2009) A Mechanical Study On Cocoa Husk – Glass Fibre/ Polypropylene (PP) Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa , Halim and Adi , Saptari and Muhammad Hafidz Fazli , Md Fauadi and Radin Zaid, Radin Umar and Tajul Ariffin, Abdullah (2008) Application Of Ergonomics Analysis And Quality Function Deployment (QFD) To Design A Materials Handling Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, N. M. and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan (2017) Thermoplastic Matrix Selection For Fibre Metal Laminate Using Fuzzy Vikor And Entropy Measure For Objective Weighting. Journal of Engineering Science and Technology, 12 (10). pp. 2792-2804. ISSN 2792 - 2804

Iskandar, Meran (2009) Damage Initiation And Propagation Of Sandwich Composites Panel Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohd Muzafar and Othman, Mohd Azlishah and Zakaria, Zahriladha and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Ramlee, Ridza Azri and Meor Said, Maizatul Alice and Abas, Norafizah and Zainuddin, Muhammad Noorazlan Shah and Abdul Rahim, Razilah and Mohamed Aminuddin, Mai Mariam and Idris, Muhammad Idzdihar (2014) Bending Waveguide Modeling For Light Trapping Into Optical Fiber. Advanced Science Letters, 20 (2). pp. 412-417. ISSN 1936-6612

Ismail, Muhammad Haziq (2016) Experimental Investigation Of Rear Sprocket Failure Of A Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Shahrul Azwan (2016) Comparisons Of Mechanical Properties Between Pure Polypropylene And Polypropylene Filled With Talc Using Single Gate And Twin Gate Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Najwa (2016) Development Of A Road Line Detection Algorithm For Monitoring Driving Pattern. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ito, Teruaki and Mohamad, Effendi and Salleh, Mohd Rizal (2013) A Student Mobility Program through Cross Cultural and Technical Exposure. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Izyan Fairuz, Md Rasid (2009) Analysis Of The Stress-Strain Behaviour Of Beam For Different Type Of Cross-Section And Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzad Amir, Abdul Karim (2012) The Effect Of Coconut Waste On Concrete Structure Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat Safuan, Arif (2010) Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzuan, Ahmad (2012) The Error Compensation Strategy Using Step Approach For Machining Thin-Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzul Hazwan , Amir (2013) Strengthening of aluminium alloy 6061 by using precipitation hardening heat treatment. Project Report. UTeM. (Submitted)

J

Jafri, Jamaludin (2008) Effects Of Fiber Size Modification On The Mechanical Properties Of Kenaf Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal, Norakmar (2013) The Effect of tempering temperatures on a fatigue of AISI 4130. Masters thesis, UTeM.

Jeefferie, Abd Razak (2009) Production And Characterization Of Polypropylene-Carbon Nanotube Nanocomposites. Masters thesis, Universiti Putra Malaysia.

Jeefferie, Abdul Razak (2010) Development and mechanical testing of wood composite (WPC) made recycled polymer and recycled wood flour. Other thesis, UTeM.

Jordan, Keith Ogak (2013) Finite element simulation of a rolling process of aluminium. Project Report. UTeM, Melaka. (Submitted)

Joseph, Tiong King Ing (2010) Experimental Investigation Of Bamboo-Filled Aluminium Tube Subjected To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juleza , Zakaria (2010) Oil Palm Empty Fruit Bunch (EFB) Fiber Brick Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julia, Abu Bakar (2009) Identification Of Cascade Control DC Motor System Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana, Yaakub (2015) Synthesis And Physico-Mechanical Analysis Of Graphene Nanoplatelets (GNPs) Filled Natural Rubber/Ethylene Propylene Diene Monomer (NR/EPDM) For Vibration Resistance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jumaat, Faizal Azli (2016) Investigation On The Mechanical Properties Of Hybrid Fibre Metal Laminate. Masters thesis, Universiti Teknikal Malaysia Melaka.

K

Kadhim, Kamil Jawad (2016) Effect Of Coating Thickness On The Microstructure, Mechanical And Wear Properties Of A1TiN Coatings Deposited Using Arc Ion Plating Technique. PhD thesis, Universiti Teknikal Malaysia Melaka.

Kalam, Muhammad Faiz (2016) Design And Development Of Finger-Vein Capture Device Using Arduino Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kam, Pei Yi (2009) Toughness Of Fibreglass Laminated Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Ariffin, Nurul Atirah (2016) Physical And Mechanical Properties Of Polypropylene/Reclaimed Rubber Compound. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamar Din, Tasnim (2016) Effect Of Carbon Nanofiber Nanofluid On Turning Of D2 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Zakaria and Mohd Afzanizam, Mohd Rosli and Ahmad , Rivai (2009) Environmental Effects On Fibreglass Laminated Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Zakaria (2014) Kesan Pembebanan Spektrum Dan Suhu Terhadap Hayat Lesu Aloi Aluminium AA6061 Dan AA7075. PhD thesis, Universiti Teknikal Malaysia Melaka.

Kamarul Ariffin, Zakaria and Ad Suhadak, Fadrah Hanim and Mohd Razalli, Ammer Ezhar and Kassim, M.S (2017) Fatigue Damage Analysis Of Automobile Steering Knuckle Using Finite Element Analysis. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4225-4228. ISSN 1819-6608

Kamarularifin, Kamel (2007) Fabrikasi Dan Ujian Terhadap Model Bot Persiaran. Project Report. UTeM, Melaka. (Submitted)

Kamsani, Silah Hayati (2016) Improvements On The Bees Algorithm For Continuous Optimisation Problems. PhD thesis, Universiti Teknikal Malaysia Melaka.

Karis, Mohd Safirin and Abdul Razif, Nur Rafiqah and Mohd Ali, Nursabillilah and Rosli, M. Asyraf and Mohd Aras, Mohd Shahrieel and Md Ghazaly, Mariam (2016) Local Binary Pattern (LBP) With Application To Variant Object Detection: A Survey And Method. 2016 IEEE 12TH INTERNATIONAL COLLOQUIUM ON SIGNAL PROCESSING & ITS APPLICATIONS (CSPA2016), - (-). pp. 221-226. ISSN -

Karis, Mohd Safirin and Mohd Saad, Wira Hidayat and Mohd Ali, Nursabillilah and Khor, Chin We and Abdul Razif, Nur Rafiqah (2016) Fruit Sorting Based On Machine Vision Technique. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 31-35. ISSN 2180-1843

Kasful Anuar , Muhamad Naim (2014) Electrochemical behavior of electroless Ni-W-P alloy deposit on carbide substrate in 3.5wt% salt solution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, A.N. and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar malingam, Sivakumar (2016) Mechanical Properties Of Polypropylene Composites Reinforced With Alkaline Treated Pineapple Leaf Fibre From Josapine Cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2180-1606

Kauthar , Ahmad Tajudin (2009) A Study Of Flaw Entrapment Efficiency In Penetrant Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Soon Han (2008) Influence Of Processing Methods And Fiber Size On Rheological Properties Of Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Kuo Zhuan (2009) Improvement On Rotary Draw Tube Bending's Parameter By Design And Analysis Using FEA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kek, Soo Ling (2014) Unsupervised image classification using isodata and fuzzy C-Means. Project Report. UTeM. (Submitted)

Khairil Azman, Md Akhir (2011) Real Time laser based Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Azwa, Khairul (2015) Investigation Of Mechanical And Morphological Properties Of Spent Bleach Earth (SBE) Reinforced Glass Waste Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairill Anuar, Sakan (2008) Reka Bentuk Struktur Rekreasi (Kajian Struktur Raket Tenis). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairuddin, Osman and Ahmad 'Athif , Mohd Faudzi and Mohd Fua'ad , Rahmat and Koichi, Suzumori (2014) System Identification And Embedded Controller Design For Pneumatic Actuator With Stiffness Characteristic. Mathematical Problems in Engineering, 2014. pp. 1-13. ISSN 1563-5147

Khairul Aiman , Mohd Kamil (2015) Reverse engineering of spur gearbox. Project Report. UTeM. (Submitted)

Khairul Anwar, Ibrahim and Farhan, Hanaffi (2014) Investigation Of Surface Tracking And Erosion Resistance Performance Monitoring And Optimization Of Solid Insulation Materials Under Electrical Stress & Environmental Contamination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fadzly, Kushiar (2011) Pest Repeller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Fahmi , Abdul Aziz (2014) Analysis of applying ultrasonic system on FDM nozzle using ansys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Idzham, Hasni (2008) Study On Fracture Toughness In Low Carbon Steel Using Compact Specimens With And Without Carburizing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Izad, Jalil (2009) Analisis Hentaman Terhadap Komposit Diperkuat Gentian Kaca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Nizam, Zainuddin (2009) Effect Of Coating Condition On The Corrosion Properties Of Mild Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nazihah , Khalid (2012) Corrosion Behavior Of TiAIBN, TiN And AIN Coating Produced By Magnetron Sputtering On Magnesium Substrate (Using Hank's Solution). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalis, Suhaimi (2015) Nonlinear Energy Harvesting Device For Low Frequency Human Motion Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khor, Chee Iu (2015) The Application Of Oil Palm Fiber On Concrete Structure Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Chin We (2016) Fruit Sorting By Machine Vision Technique. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Khor, Kell Nie (2011) Synthetic Hybrid Laminate Composite Using Polyester VIA Hand Lay Up For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khudhair, Ahmed Qays (2016) Physical-Mechanical Properties Of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kjeldsen, Yusuf (2009) Comparison For Front Door Passenger Car With Local And Import Car Using Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Aries Chin Chin (2015) Effects Of End Mill Helix Angle On Accuracy Of Thin-Walled Aluminium Ribs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Learn Fei (2011) Finite Element Analysis Of Tyre Using Eulerian Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ku Norfafarina, Ku Osman (2011) The Design/Analysis Of Optoelectronic pH Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kueh , Florence Hui Na (2012) Hardness Variation Of Heat Treated Layer-By-Layer Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kuwn, Yew Ching (2008) The Impact And Flexural Study Of The Polymeric Biocomposite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Wai Loon (2010) Mechanical And Thermal Properties Of Intermetallic Ni3Al For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kylie, Wong Muh Shin (2015) Effect Of Catalyst And Heat Treatment Temperature On The Coating Properties Of Sol-Gel TiO2 Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lai, Chii Chung (2016) Effect Of Surface Functionalization By Naoh On Electrophoretic Deposition Of H-BN Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Laila , Ahmad (2014) Analysis working posture and psychophysical factor in stamping industry using rula method. Masters thesis, UTeM.

Lau, Kok Wei (2010) Computer Simulation On Circular Ring Subject To Lateral Compression, Quasi-Static Lateral. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Sie Yee (2009) Fabrication Of Wood Plastic Composites From Lalang Grass And Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Law, Mei Lin (2016) Preparation And Characterization Of Recycled Carbon/Fibercarbon Nanotube Reinforced Epoxy Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lay, Yan Ten (2015) Effect Of Different Impactor Nose On Laminated Composite Structure Under Quasi Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Beng Choon (2008) Characterization Of Mechanical Propertise On Polystyren E/E-Glass In The Absence And Presence Of Charcoal Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Song Jin (2016) Design Of Noise Insulator For Metal Stamping Operation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yuk Choi (2004) A Study On Simulated Rainfall Noise Generation And Prediction Of Rain Noise For Composite Roof Constructions. Masters thesis, UTeM.

Lee, Yuk Choi (2004) A study on simulated rainfall noise generation and prediction of rain noise for composite roof constructions. Masters thesis, Universiti Teknologi Malaysia.

Lem , Zhi Xian (2012) Assessment Of The Hand Grip Strength And Hand Injuries For UTeM Sportsperson. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leng , Siong Cheng (2011) An Investigation Of The Effect Of Various Heat Treatment Processes On Microstructure And Stress Corrosion Cracking (SCC) Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Shu Teng (2013) Performance Analysis Of Mineral Fibre Reinforced Polypropylene. Project Report. UTeM, Melaka. (Submitted)

Leong, Shu Ching (2011) Classification Of Hand-Writing Identification Based On ANFIS. Project Report. UTeM, Melaka. (Submitted)

Leong, Shu Teng (2016) Modelling And Characterization Of Stone Wool Fibre Reinforced High Density Polyethylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Liaw , Geok Pheng (2014) Design of vision system to recognize the scribed number on the wafer. Project Report. UTeM. (Submitted)

Liaw , Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2016) Study The Feasibility Of Parabolic Dish (Pd) From Several Prospective Criteri In Malaysia Environment. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3929-3937. ISSN 1819-6608

Lie, , Ken Nie (2013) The rolling effect in mechanical properties of 316L stainless steel for implant materials. Project Report. UTeM, Melaka. (Submitted)

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Che Sidik, Nor Azwadi and Yan , Jiwang (2017) An Overview Of Current Status Of Cutting Fluids And Cooling Techniques Of Turning Hard Steel. International Journal of Heat and Mass Transfer, 114 (-). pp. 380-394. ISSN 0017-9310

Lim, Kok Chin (2010) Mechanical And Thermal Properties Of Intermetallic Ni5Al3 For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Si Qing (2013) Design And Analysis Of Natural Fiber-Metal Matrix Composites For Engineering Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Choon Pin (2016) Worker Health Monitoring System Based On SOCSO Standard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cze Siang (2010) Multi Size Shape Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Reo Sei (2016) Development And Acoustical Analysis Using Kenaf And Coconut Fibres At Different Fibre Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Siang Ying (2009) Effect Of Fullerenes Nanofiller And Carbon Black Filler Of Corrosion Activities On Paint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Teck and Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2009) Flexible Approach for Region of Interest Creation for Shape-Based Matching in Vision System. In: Conference on Innovative Technologies in Intelligent Systems and Industrial Applications (CITISIA 2009), 25th & 26th July 2009, Monash University, Sunway campus, Malaysia.

Lim , Wee Teck and Sulaiman , Marizan and Mohd Shah, Hairol Nizam and OMAR, ROSLI (2010) Implementation of Shape – Based Matching Vision System in Flexible Manufacturing System. Journal of Engineering Science and Technology Review , 3 (1) (1). pp. 128-135. ISSN 1791-2377

Lim , Yee Kai (2008) Mechanical Properties Of Mullite-Bonded Silicon Carbide Sintered At Various Heating Temperature. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ling, Jia Xin (2016) Study The Properties Of MgAZ91D After The Gas Nitriding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liong, Shun Hsiang (2010) Analysis Of Springback Problem On Aluminum Sheet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lisa, Theng (2011) Natural Hybrid Sandwich Composite For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lisa Umami, Abdul Khalik (2015) Development Of Handwritten Character Recognition By Using Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liu, Kit Lim (2009) Vision Based Road Line Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liyana, Muhamad Ali (2013) The Effect Of Colouring Agent On The Corrosion Properties Of Glass Composite Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Mun Chui (2013) Performance Analysis Of Mineral Fibre Reinforced Polyethylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Hao Zhe (2015) Process Optimization For Esterification From Non-Edible Rubber Seed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Yen Ching (2015) Development And Analysis Of New Intraply For Glass Fiber And Kenaf Fiber In Composite Structure Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh , Yau Weng (2008) Study On The Efficiency Of Services Provided By Post Office Using Simulation Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Yian Yian and Khoo, Chin Foon and Tee, Boon Tuan (2007) Mathematical Modelling Of Stagnation Point Flow Induced By Accelerating Motion In Micropolar Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo, Chooi Heng (2011) Thermal-Stress Analysis Of Cross-Drilled Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loo , Chooi Heng (2011) Thermal-Stress Analysis Of Cross-Drilled Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Louis, Teo Cheah Hong (2015) The Effect Of Semi-Vertex Angle On The Buckling Of Cylinder And Cones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Say Soon (2010) Least-Squares Parameter Estimation And Its Application In Electronic Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Yin Fen and Izadora, Mustaffa and Norhashimah, Mohd Saad (2006) Medical Image Compression Using Wavelets For Telemedicine Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Yin Fen (2011) A performance study of the wavelet-phase stability (WPS) in auditory selective attention. Brain Research Bulletin, 86 (1-2). pp. 110-117. ISSN 0361-9230

Low , Yin Fen (2011) Assessment of Cortical Inhibition in Adult Attention-Deficit/Hyperactivity Disorder by Paired-Chirp Auditory Evoked Potentials. In: 5th International IEEE/EMBS Conference on Neural Engineering, 27 April -1 May 2011, Cancun, Mexico.

Low , Yin Fen (2011) A Performance Study of the Wavelet-Phase Stability in the Quantification of Neural Correlates of Auditory Selective Attention. In: The 5th International IEEE EMBS Conference on Neural Engineering, April 27 - May 1, 2011, Cancun, Mexico.

Lu, Kian Hap (2015) The Effect Of Material Discontinuity On The Flanges Of Axially Compressed Cylinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luei, Hong Keat (2010) Measurement Of Surface Roughness Using Image Processing Technique. Masters thesis, UTeM.

M

M., Zulkiflee and M.A, Faizal and I.O, Mohd Fairuz and Abu, N. A. and Sahib, S. (2011) Behavioral Analysis on IPv4 Malware in both IPv4 and IPv6 Network Environment. International Journal of Computer Science and Information Security, 9 (2). ISSN 1947-5500

M. R., Sapiee and Abdullah, F. and Noordin, A. and Jahari, A. N. (2008) PI Controller Design Using Model Reference Adaptive Control Approaches For A Chemical Process. In: 2008 Student Conference on Research and Development (SCOReD 2008) , 26-27 Nov. 2008, UTM, Johor.

M. R., Sapiee and Noordin, A. (2010) Adaptive Gain Controller Using Model Reference Adaptive Control Method Stability Approach For Road Vehicle Following System. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 2 (1). pp. 55-70. ISSN 2180-1053

M. R., Sapiee and Noordin, Aminurrashid and Basar, Mohd Farriz and Rasin, Zulhani and Talib, Md Hairul Nizam (2010) Road Vehicle Following System With Adaptive Controller Gain Using Model Reference Adaptive Control Method Lyapunov Approaches. In: The 2nd International Conference on Engineering and ICT (iCEi2010), 18 -20th February 2010,, Melaka.

M. R., Sapiee and Sudin, Shahdan (2010) Road Vehicle Following System With Adaptive Controller Gain Using Model Reference Adaptive Control Method. International Journal of Simulation Systems, Science & Technology, 11 (5). pp. 24-32. ISSN 1473-804x

M. R., Sapiee and Sudin, Shahdan (2009) Road Vehicle Following System with Adaptive Controller Gain Using Model Reference Adaptive Control Method. In: The Second International Conference on Control, Instrumentation and Mechatronic Engineering (CIM09), June 2-3, 2009, Melaka.

M. S., Kamil and A. M., Kamely and H. Y., Saifudin and A. P., Puvanasvaran and M.M.P., Dan (2010) THE SOURCE OF UNCERTAINTY IN 3D LASER SCANNER. Journal of Advanced Manufacturing and Technology, 4 (1). pp. 87-96. ISSN 1985-3157

MOHAMAD, EFFENDI and SOBIREN, NORHASLINA and Saptari, Adi and Salleh, Mohd Rizal (2009) THE IMPLEMENTATION OF RISK MANAGEMENT AT AEROSPACE MANUFACTURING COMPANY. Journal of Human Capital Development, 2 (1). pp. 25-36. ISSN ISSN: 1985-7012

MOHAMAD, EFFENDI and Abdullah, Rohana and Wan Mahmood, Wan Hasrulnizzam (2008) COMMUNICATION GAP ANALYSIS AT AEROSPACE MANUFACTURING COMPANY. Journal of Human Capital Development, 1 (1). pp. 21-27. ISSN ISSN: 1985-7012

Mad Lazim, Muzafirah and Hashim, Nik Mohd Zarifie and Sulaiman Wong, Najibah and Salleh, Azahari (2014) A Study On Image Enhancement. International Journal of Emerging Technology & Research, 1 (6). pp. 67-73. ISSN 2347-6079

Mahamood, Mazlin Aida (2016) Optimisation And Characterisation Of Functionalised Graphene Nanoplatelets Filled NR/EPDM Nanocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahendran, Ramaiah (2008) Material Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmood, Raed Abdulameer (2013) Effect of heat treatment on low carbon steel. Masters thesis, UTeM.

Mahmood, Raed Abdulameer (2013) Effect of heat treatment on low carbon steel corrosion behavior. Masters thesis, UTeM.

Mahzan, Johar (2010) Effect Of Solution Annealing On Microstructure, Corrosion And Mechanical Property Of Sensitized AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maidin, Shajahan and Abdul Aziz, Khairul Fahmi and Muhamad, Muhammad Kazimi and E., Pei (2015) Analysis Of Applying Ultrasonic Frequency On A Desktop FDM Nozzle. Journal of Applied Mechanics and Materials, 761 (-). pp. 329-333. ISSN 1660-9336

Majid, Rosmiza (2013) Ergonomic risk factors in material handling for warehouse operations. Masters thesis, UTeM.

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marani, Rahmat (2009) Analisis Dalam Menghasilkan Plastik Diperkuat Gentian (FRP) Menggunakan Plastik Terbuang Dan Sabut Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mardiana, Bidin and Hanim, Abdul Razak and Haroon, Hazura and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2010) Electro-Optical Modulator Performance in SOl. In: International Conference on Enabling Science and Nanotechnology (ESciNano), 1-3 Disember, 2010, KLCC.

Mardiana, Bidin and Hanim, Abdul Razak and Haroon, Hazura and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) 2x2 Optical Switch Based on Silicon-On-Insulator Microring Resonator. Advanced Materials Research. pp. 531-534. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Menon, P.S and Abdullah, H. (2010) Operation mode of phase modulation based on carrier dispersion effect in p-i-n diode of silicon rib waveguide. In: IEEE International Conference on Semiconductor Electronics (ICSE 2010), 28-30 Jun 2010, Melaka.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Abdullah, H. (2010) Phase modulator based on Silicon-on-Insulator (SOI) rib waveguide. In: International Conference on Photonics (ICP) 2010 , 5-7 Julai, 2010, Pulau Langkawi.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Abdullah, H. (2010) Various Doping Concentration Effect on Silicon-on-Insulator (SOI) Phase Modulator. In: International Conference on Photonics (ICP 2010), 5-7 Julai 2010, Pulau Langkawi.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Active SOI Optical Ring Resonator Based on Free Carrier Injection. Advanced Materials Research , 403-40. pp. 758-761. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Performance of the Active Microring Resonator Based on SOI Rib Waveguide. Advanced Materials Research, 462. pp. 375-379. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Plasma Dispersion Effect for Various Doping Configuration on the SOI Phase Modulator with Trapezoidal Rib Waveguide. Advanced Materials Research, 403-40. pp. 4403-4407. ISSN 1662-8985

Mardiana, Bidin and Sahbudin, Saari and Menon, P.S and Haroon, Hazura and Hanim, Abdul Razak and Arsad, N. and Abdullah, H. (2014) Analyses for various doping structures of SOI-based optical phasemodulator using free carrier dispersion effectB. Optik, 125. pp. 1800-1803. ISSN 0030-4026

Mashirnani, mohd Tahir (2012) Fruit Sorting Based On Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mashitah, Razi (2015) Effect Of Pineapple Leaf Fiber Length On The Properties Of Pineapple Fiber : Starch Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masihah, Abd Halim (2007) Kajian Kesan Lapisan Serat Dan Suhu Pengerasan Ke Atas Komposit Laminat. Project Report. UTeM, Melaka. (Submitted)

Masjuri , Musa (2006) Design Of An Automated Food Dispensing System For Goat's Feeding. Masters thesis, Universiti Putra Malaysia.

Maslan, Mohammad Haidir (2016) Development Of Predictive Finite Element Models For Complete Contact Fretting Fatigue. PhD thesis, Universiti Teknikal Malaysia Melaka.

Masni, Ahmad Basri (2009) Mengkaji Sifat-Sifat Mekanikal Campuran Plastik Buangan Yang Terdiri Daripada Plastik Jenis PET, HDPE Dan PS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masni-Azian, Akiah and Toibah, Abd Rahim and Mohd Nazrin, Muhammad and Zuraida, Abdul Majid (2012) Preliminary Development of Abrader Tool for Paper De-Printing Apparatus using Taguchi Method. In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

Masrullizam, Mat Ibrahim (2014) Video Processing Analysis For Non-Invasive Fatigue Detection And Quantification. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mastura , Maarof (2007) Flow Investigation Around Immersed Bodies In Subsonic Wind Tunnel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat, Zamzury (2013) Development of sustainable material selection for automotive bumper fascia using analytical hierarchy proses (AHP). Masters thesis, UTeM.

Mat Hassan, Mohd Iqbal Hakim (2016) Dynamic Fatigue Analysis For Spot Welded Joint Based On Natural Frequency Due To Cycling Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hassan, Muhamad Hafis (2016) Study The Material Performance Of Aluminum-Zinc And Galvanized Iron For Roofing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Ibrahim, Masrullizam (2006) Removal of object's shadow. Masters thesis, Universiti Teknologi Malaysia .

Mat Tahir, Noor Ayuma (2016) Tribological Performances For Palm Kernel Activated Carbon Epoxy Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X

Mazlan, Ahmad Mansor and Mohd Irman, Ramli (2012) Final Examination BTMU1162 Numerical Method 2011-12 Sem2 FTK. [Teaching Resource] (Submitted)

Mazlan, Muhamad Hafeez Fikri (2016) Microstructural Characterization And Mechanical Properties Of Semisolid A356 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan , Khairunnisa (2016) Design The Sensor For Obstacle Avoidance For Underwater Application Using A Laser Distance Finders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazliyana, Ayub (2009) Ultrasonic Cane For The Blind : Transmitter And Receiver. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mazuri, Mohamed (2015) Determination Defect And Mechanical Properties Of Carbon Steel Plate With Different Current Value Using SMAW Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Afindi, Muhammad (2013) Fabrication And Characterizations Of Hydroxyapatite (HA) / Chitosan (CTS) Composite Layer Onto Titanium Alloy (Ti-6AL-4V) Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali Shifudin, Mohamad Hatim Arrazi (2016) Feasibility Of Coconut Grated In The Production Of Chipboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Fahmi, Abd Samad (2014) Evolutionary Computation in System Identification: Review and Recommendations. International Journal of Automatic Control. pp. 208-216. ISSN 19746059

Md Fua’ad, Jamian (2010) Merekabentuk Dan Menghasilkan Blok Uji Ujian Tanpa Musnah (NDT) Untuk Aplikasi Ujian Ultrasonik (UT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ghazaly, Mariam and Yeo, Chin Kiat and Chong, Shin Horng and Yusri, I and Tee, Siau Ping (2017) Parameter Optimization Of A Tubular Linear Type Reluctance Motor For High Thrust Force. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9. pp. 117-120. ISSN 2180-1843

Md Isa, Ida Syafiza and Mohd Shaari Azyze, Nur Latif Azyze and Ibrahim Tuani, Ahamed Fayeez (2014) Portable Wireless Traffic Light System (PWTLS). PORTABLE WIRELESS TRAFFIC LIGHT SYSTEM (PWTLS), 03 (02). pp. 242-247. ISSN 2319-1163

Md Muzzammil , Md Jais (2007) Temperature Measuring Apparatus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nizam, Abd Rahman (2009) Modelling Of Pysical Vapour Deposition (PVD) Process On Cutting Tool Using Respone Surface Methodology ( RSM ). PhD thesis, Coventry University.

Md Noah, Jamal and Marizan, Sulaiman and Siri Norasmah, Mohtar (2003) Analysis Of Conductivity And Current Carrying Capacity Of Aluminum Conductor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Razali, Juliana (2016) Automated Packaging Visual Inspector Using Template Matching Algorithm In Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Said, Mohd Ashraf (2011) Portable Distance Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusop, Azdiana and Noor Asyikin, Sulaiman (2008) VIBRATION CONTROL OF A GANTRY CRANE SYSTEM USING DYNAMIC FEEDBACK SWING CONTROLLER. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.

Md. Hashim, N. and Asmala, A. and Abdullah, M. (2007) Mapping urban heat island phenomenon: Remote sensing approach. Journal - The Institution of Engineers, Malaysia, 68 (3). pp. 25-30. ISSN 0538-0057

Md. Radzai, Said and Amzatul Akmam, Mokhtar (2005) The Crushing Of Cellular Filled Thin Tubes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Radzai, Said and Amzatul Akmam, Mokhtar (2005) The Study Of Finite Element Analysis On Aluminium Honeycomb Under Biaxial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mellvyne, Sigo (2007) Design For Manufacture And Assembly (DFMA) Evaluation Of Car Audio Front Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Muhsin, Fadzil (2011) Determination Of Vibration Input Power From A Structure-Bone Source. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moamad Izzudin, Abdul Hamit (2010) Mechanical And Microstructure Characterization Of Oil Treated Aluminium Alloy 7075. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohamad, Effendi (2009) The Development of Key Performance Indicators (KPIs) at an Aerospace Manufacturing Company. Project Report. Penerbit Universiti Teknikal Malaysia Melaka.

Mohamad, Ismail (2010) Ergonomic Assessment In Manufacturing Industry (Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Azrin (2016) Development Of Barcode Scanner Using Handphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Effendi (2013) Characteristic Mapping Of Overall Equipment Effectiveness Elements Through Simulation And The Taguchi Method. Journal of Human Capital Development, 6 (2). pp. 1-11. ISSN 1985-7012

Mohamad, Effendi (2013) Quantifying Benefits Of Lean Manufacturing Tools Implementation With Simulation In Coolant Hose Factory. Journal of Human Capital Development, 6 (2). pp. 13-26. ISSN 1985-7012

Mohamad, Effendi and Muhamad, Mohd Razali and Abdullah, Rohana and Adi , Saptari (2008) A Study on the Development of Key Performance Indicators (KPIs) At an Aerospace Manufacturing Company. Journal of Advanced Manufacturing Technology (JAMT) , 2 (2). pp. 1-17. ISSN 1985-3157

Mohamad, Effendi and Salleh, Mohd Rizal (2012) Simulation Study Towards Productivity Improvement for Assembly Line. Journal of Human Capital Development, 5 (2). pp. 59-69. ISSN 1985-7012

Mohamad, Effendi and Sulaiman, Mohd Amri (2016) Simulation-based approach to Lean Manufacturing. Technical Report. Penerbit Universiti,UTeM.

Mohamad, Effendi and Teruaki, Ito and Dani , Yuniawan (2013) A simulation-based approach to decision support for lean practitioners. In: 20th ISPE International Conference on Concurrent Engineering, 2-6 September 2013, Melbourne , Australia.

Mohamad, Mohd Syafiq Syimir (2015) Finite Element Analysis Of Tray Cover Design For Digital Versatile Disc Player. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aizat Hazraf, Mohd Sukri (2015) Effect Of Sliding Speed On Tribological Properties Of Elevated Temperature Palm Kernel Activated-Epoxy Composite (PKAC-E). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Amiruddin, Nor Azizan (2009) Study Of Application Of Light Weight Concrete. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Azwadi, Mohamad Nuzam (2011) A Study Of Friction Control For Damping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Buhori, Fauzi (2007) Kajian Kelesuan Terhadap Logam Menggunakan Bebanan Mampatan. Project Report. UTeM, Melaka. (Submitted)

Mohamad Eezafri, Mohamad Fazee (2010) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Elfizi, Serat (2009) Kajian Ke Atas Bahan Buangan Sebagai Bahan Menjimatkan Tenaga Di Dalam Sektor Pembinaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fadlizan, Rosni (2009) Vibration Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fais, Mohamed Zamri (2015) Penyiasatan Perambatan Gelombang Akustik Pada Struktur Konkrit Bertetulang Dengan Bar Keluli Tertanam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fauzi, Abu Bakar (2008) Study Of Acrylonitrile Butadiene Styrene Properties By Fused Deposition Modeling (FDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fazli, Husain (2009) The Influence Of Cu-Reinforced Aluminium Metal Matrix Composite To The Mechanical Properties, Corrosion Resistance And Microstructure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hanif, Puzizer (2015) Fatigue Study Of Aluminium Alloy At Different Temperatures In Faculty Of Mechanical Engineering, Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Hashim, Ummi Kalsom and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Sakidin, Hamzah and Balakrishnan, Subatira and Mohamad Isa, Mohd Sa'ari (2016) Change Detection From Landsat-5 TM Satellite Data. ARPN Journal Of Engineering And Applied Sciences, 11 (17). pp. 10234-10238. ISSN 1819-6608

Mohamad HayatunnufusMd Nasir, Mohamad Hayatunnufus (2014) Tribological properties of carbon fiber prepreg waste reinforced thermoplastic composites prepared via melt mixing. Project Report. UTeM. (Submitted)

Mohamad Ikram, Mohamad (2015) Human Activity Analysis Using DELMIA Ergonomics On JTKP Milling Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Jaya, Abdul Syukor and Hasan Basari, Abd Samad and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Muhd. Razali and Abd. Rahman, Md. Nizam (2011) Application of ANFIS in Predicting of TiAlN Coatings Hardness. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1647-1657. ISSN 1991-8178

Mohamad Kamal, Khalid (2011) A Study On The Effect Of Disc Geometry On Thermal Capacity Of Disc Brake Rotor Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Kamarul Nizam, Abd Halim (2015) Modelling Of Thin Wall Machining With Tabular Helix End Mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mustaqiim , Che Hassan (2010) New Technique Of Plastic Mould For Thermoset Composite Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nasrul , Hashim (2009) Fiber Optic As Electric Current Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Qabil, Ismail (2015) Design Optimization Of Saddle Support For High Capacity Pressure Vessel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ridwan , Ramli (2013) Cutter Path Strategy For Machining Craniofacial Medical Implant PEEK Composite. Project Report. UTeM, Melaka. (Submitted)

Mohamad Ridzwan, Ishak (2007) A Comparison Of Mechanical Properties Between Kenaf Core Fiber And Kenaf Bast Fiber Reinforced Polyester Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Salleh, Mohamad Fazli (2016) Study And Analysis Of Power Attenuation Due To Optical Bend Loss In OPGW Overhead Transmission In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Sattar, Syarizal Azim (2016) Design And Finite Element Analysis Of Ergonomics Prosthetic Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shahrul Effendy, Kosnan (2010) Finite Element Of Human Spine CAD Model Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shukri , Zakaria (2013) Greenhouse Gas Reduction by Utilization of Cold LNG Boil-off Gas. Procedia Engineering, 53. pp. 645-649. ISSN 1877-7058

Mohamad Syahrul Aswadi , Mohamad (2007) Pembangunan Aloi Ferus Terkimpal Dengan Retak Permukaan Sebagai Spesimen Ujian Tanpa Musnah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zarul, Drahman (2012) Processability And Characteristic Of Thermoplastic Reinforced Comminution For Out Of Condition Aerospace Grade Carbon Fiber Prepreg Waste Via Melt Compounding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zuhaili, Jamaluddin (2015) Simulasi Ujian Impak Menggunakan Analisis Unsur Terhingga Pada Roda Rim Aloi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zuric Adham , Mat Esa (2013) Alat Penghilang Sakit Belakang. Project Report. UTeM, Melaka. (Submitted)

Mohamed Aizat, Mohamed Zahir (2011) Preparation And Characterization Of Banana Fiber Reinforced Polypropylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Amin Tawakkal, Nursyafiqah (2016) Application Of Ergonomics Principles For Workplace Arrangement Of Bicycles Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Sabri, Mohammad Fadhil Hanafi (2015) Design An Application Of Microperforated Noise Silencer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Arsyan, Kamaruzaman (2009) Heat Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azwan Safwan, Harun (2015) Optimization Of The Fabrication Process Parameters Of An Optical Modulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faiz, Yahani (2012) Microstructure Analysis On Heat Treated Carbon Steel Material Subjected To External Flame Heating Process (Due To Warpage Control). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fazli, Sahbuddin (2008) Design 15-Way Infra Red Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fitri, Mohamed Ridzuan (2011) Development Of An Automotive Clutch Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Basir (2008) Investigate The Effect Of Layer Thickness On Mechanical Properties Of Parts Produce Using RP 3D-Printer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Abdellah (2010) Selection Of Difference Equation Minimum Model Specification By Correlation Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin , Shammuin (2013) Insulation materials for home residence building wall. Project Report. UTeM, Melaka. (Submitted)

Mohammad Iskandar, Seni (2007) The Study of Mechanical Properties and Microstructure of Thermal-Curing Process on Natural Fiber (Kenaf) Reinforced Thermoset Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nadzrul Izamuddin, Najmuddin (2011) Textural Investigation Of Carbon Nanotube Using Nitrogen Adsorption Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nazri, Razali (2012) Resistivity Analysis In Layered Soils. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nur Rasyid , Samsudin (2011) Design Optimization Of Manual Wheelchair Frame Using DFA Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sabri, Muhammad Haziq (2016) Car Counting Using Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafieq, Sazali (2015) Anthropometric Dimensions And Preferred Working Surface For The Lecturer Office. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Taha, Mastura and Salit @ Sinon, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application Of Hybrid Sugar Palm-Filled Polyurethane Application Of Hybrid Sugar Palm-Filled Polyurethane Composites In Conceptual Design Of An Automotive Anti Roll Bar. Journal of Engineering and Technology (JET), 7 (1). pp. 102-113. ISSN 2180-3811

Mohammed Rozi , Hamid (2013) Finite element micromechanical modeling of aluminium magnesium alloy during plastic deformation. Project Report. UTeM. (Submitted)

Mohd Ab. Halim, Mohd Firdaus and Yahaya, Muhammad Sharil and Ibrahim , Zulkifli and Hj Md Basar, Mohd Farriz and M. R., Sapiee and Ahmad, Suziana and Che Wan Mohd Zalani, Che Wan Mohd Faizal and Salim�, Fadzilah and Noordina, Aminurrashid and Ibrahim, Norliana (2012) Magnetic Levitation Training Kit for Teaching Basic Electrical Control System Courses. In: THE 3RD INTERNATIONAL CONFERENCE ON ENGINEERING & ICT (ICEI2012) , 4-6 april 2012, Melaka, Malaysia.

Mohd Abid, Mohd Asyadi Azam (2012) Direct growth of vertically aligned single-walled carbon nanotubes on conducting substrate and its electrochemical performance in ionic liquid. Physica Status Solidi A, 209 (11). pp. 2260-2266. ISSN 1862-6319

Mohd Abid, Mohd Asyadi Azam (2012) Thermoelectric and Electrochemical Properties of Highly Ordered Conducting Polymer/Carbon Nanotube Structures. In: 12th International Workshop on the Electrochemistry of Electroactive Materials (WEEM), 3-6 June 2012, Szeged, Hungary.

Mohd Abid, Mohd Asyadi Azam (2013) Towards realization of high performance energy storage device: Nanostructuring CNT electrode. In: Workshop on Advanced Energy Storage Materials & Devices (WAESD), 4-5 July 2013, UPNM, Kuala Lumpur.

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin (2013) Development of High Performance Electrochemical Capacitor: A Systematic Review of Electrode Fabrication Technique Based on Different Carbon Materials. ECS Journal of Solid State Science and Technology. M3101-M3119. ISSN 2162-8777

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Noraiham (2014) Electrode Fabrication and Electrochemical Analysis of AC/Graphene-Based Electrochemical Capacitor in 1 M H2SO4. Advanced Science, Engineering and Medicine, 6. pp. 1-4. ISSN 2164-6627

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and raja seman, raja noor amalina (2014) Designing Supercapacitor from Nanocarbon Materials. In: Design and System Division Conference, 17-19 September 2014, Tokushima University, Japan.

Mohd Abid, Mohd Asyadi Azam and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Abd Rashid , Mohd Warikh (2014) An overview of selected catalytic chemical vapor deposition parameter for aligned carbon nanotube growth. Nanoscience & Nanotechnology-Asia, 4. pp. 2-30. ISSN 2210-6820

Mohd Abid, Mohd Asyadi Azam and Mohd Warikh, Abd Rashid (2013) X-ray and morphological characterization of Al-O thin films used for vertically aligned carbon nanotube growth. Advanced Materials Research. pp. 213-218. ISSN 10226680

Mohd Abid, Mohd Asyadi Azam and Rosle, Muhammad Firdaus (2013) Electrochemical Analyses of Carbon Nanotube Based Supercapacitor in 1M LiPF6 Organic Electrolyte. International Journal of Electroactive Materials, 1. pp. 55-59. ISSN 2289-179X

Mohd Abid, Mohd Asyadi Azam and Talib, Elyas and Mohamad, Noraiham and Kasim, Mohd Shahir and Abd Rashid , Mohd Warikh (2014) Mechanical and Thermal Properties of Single-Walled Carbon Nanotube Filled Epoxidized Natural Rubber Nanocomposite. Journal of Applied Sciences, 14 (18). pp. 2183-2188. ISSN 1812-5654

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2015) Synthesis of Fe catalyst nanoparticles by solution process towards carbon nanotube growth. Materials Technology, 30 (A1). A8-A13. ISSN 1066-7857

Mohd Abid, Mohd Asyadi Azam and raja seman, raja noor amalina and Abdul Manaf, Nor Syafira (2015) Electrochemical performance of activated carbon and graphene based supercapacitor. Materials Technology, 30 (A1). A14-A17. ISSN 1066-7857

Mohd Abid, Mohd Asyadi Azam and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah (2013) Nanostructuring Ultra-thin Co Films to Active Catalyst Particles for Vertically Aligned Single-Walled CNT Growth. Procedia Engineering , 68. pp. 566-571. ISSN 1877-7058

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin and Talib, Elyas (2013) Aligned carbon nanotube from catalytic chemical vapor deposition technique for energy storage device: a review. Ionics, 19 (11). pp. 1455-1476. ISSN 0947-7047 (Print); 1862-0760 (Online)

Mohd Abid, Mohd Asyadi Azam and Isomura , Kazuki and Ismail, Syahriza and Mohamad, Noraiham and Shimoda, Tatsuya (2015) Electrically Conductive Aluminum Oxide Thin Film Used As Cobalt Catalyst-Support Layer In Vertically Aligned Carbon Nanotube Growth. Advances In Natural Sciences : Nanoscience And Nanotechnology, 6 (-). pp. 1-6. ISSN -

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2015) Systematic review of catalyst nanoparticles synthesized by solution process: towards efficient carbon nanotube growth. Journal of Sol-Gel Science and Technology, 73 (2). pp. 484-500. ISSN 0928-0707

Mohd Adib Muizzuddin, Mohlis (2008) Predicting Turbulent Flow In A Staggered Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adnan Hafiz, Zahari (2015) A Study On The Effect Of Coconut Fiber To Polypropylene (PP) As A Friction Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adzwan, Addly (2008) Quenching- Tempering Effects On Fracture Properties In Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afif, Abdul Wahab (2008) Analysis Of Hand Strength For Pinching Activity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Afzanizam, Mohd Rosli (2007) A Study Of Catalytic Converter Of Diesel Oxidation Catalyst Using CFD Fluent. Masters thesis, Coventry University.

Mohd Afzanizam , Hamdan (2009) Performance Of Scaled Conjugate Gradient Algorithm In Face Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Akmal , Ab Halim (2007) Pengesanan Perambatan Retak Dalam Aluminium Tempatan Yang Dilindapkejut Dengan Menggunakan Teknik Pengesanan Visual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Al-Jufri , Md Zin (2008) Pengesanan Dan Pengawasan Alat Pengesan Bilik Tertutup. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Rosli (2013) Wear Behavior of Carbon Nanotube (CNT)Short Natural Fiber Reinforced Epoxy Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ameer Aiman , Ruhaizi (2013) Improving stability of water based nanocarbon using OH-CNT modifield with polyvinyl pyrrolidone as a dispersing agent. Project Report. UTeM, Melaka. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amman, Rosmia and Halim, Mohd Faizal and Dhar malingam, Sivakumar and Abu Shah, Ismail (2016) Influences Of Thickness And Geometrical Change From Draw Forming In Quasi-Static Axial Compression Simulation. International Review on Modelling & Simulations, 9 (6). pp. 442-449. ISSN 1974-9821

Mohd Annuar, Khalil Azha and Ismail, Fatimah Sham (2014) Optimal Pin Fin Arrangement of Heat Sink Design and Thermal Analysis for Central Processing Unit. In: Intelligent and Advanced Systems (ICIAS), 2014 5th International Conference, 3-5 June 2014 , KLCC Kuala Lumpur.

Mohd Aras, Mohd Shahrieel and Ab Azis, Fadilah and Othman, Muhammad Nur (2012) A Low Cost 4 DOF Remotely Operated Underwater Vehicle Integrated With IMU and Pressure Sensor. 4th International Conference on Underwater System Technology: Theory and Applications 2012 (USYS'12). pp. 18-23. ISSN 978-983-43178-6-7

Mohd Aras, Mohd Shahrieel and Abd Aziz, Mohamad Zoinol Abidin (2008) Dielectric Resonator Antenna (DRA) for Wireless Application. In: INTERNATIONAL RF AND MICROWAVE CONFERENCE PROCEEDINGS, 2- 4 December 2008, Kuala Lumpur, MALAYSIA.

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Fara Ashikin , Ali and Syed Mohamad Shazali, Syed Abdul Hamid and Mohd Farriz , Md Basar (2011) Performances Evaluation and Comparison of Two Algorithms for Fuzzy Logic Rice Cooking System (MATLAB Fuzzy Logic Toolbox and FuzzyTECH). In: 2011 IEEE Conference on Open Systems, 25-28 Sept 2011, Langkawi, Malaysia.

Mohd Aras, Mohd Shahrieel and Hairi, Mohd Hendra and Syed Salim , Syed Najib and Wan Abdul razak, Intan Azmira (2009) Comparison of Fuzzy Control Rules using MATLAB Toolbox and Simulink for DC Induction Motor-Speed Control. In: International Conference of Soft Computing and Pattern Recognition, December 04-December 07, Malacca, Malaysia.

Mohd Aras, Mohd Shahrieel and Mohamad Zoinol Abidin, Abd Aziz and Rasin, Zulhani (2008) An Array of Dielectric Resonator Antenna for wireless application. In: 2008 IEEE INTERNATIONAL RF AND MICROWAVE CONFERENCE PROCEEDINGS, 2-4 december 2008, Kuala Lumpur, Malaysia.

Mohd Arif , Zaulkefli (2013) Acustic of mosque : the effect of roof shape on it's acoustic performance. Project Report. UTeM. (Submitted)

Mohd Aris, Nor Azlan and Din, Jafri and Lam, Hong Yin (2011) Rain Height Information from TRMM Precipitation Radar for Satellite Communication in Malaysia. In: 2011 IEEE International Conference on Space Science and Communication (IconSpace), 12-13 July 2011, Penang, Malaysia.

Mohd Aris, Nor Azlan and Lam, Hong Yin and Din, Jafri and Luini , Lorenzo (2013) 1-Minute Integrated Rain Rate Statistics Estimated from Tropical Rainfall Measuring Mission Data. IEEE Antennas and Wireless Propagation Letters, 12. pp. 132-135. ISSN 1536-1225

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri , Yusuff (2014) Penilaian taburan hayat lesu komponen automotif dengan bebanan ekstrem melalui pendekatan ciri hayat taburan dan fungsi keboleharapan. PhD thesis, UTeM.

Mohd Asyraf, Ruslan (2009) The Study Of Comparative Analysis Of Boothroyd Dewhurst (BD) Design For Manufacture And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azam , Roslan (2007) Dynamic Characterization Of Two Dimensional Flexible Plate Structure Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azham , Azmi (2008) Investigation Of Mechanical Properties Of Aluminium 2024 - Stainless Steel 304 Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi , Jali (2007) Design For Manufacture And Assembly Of Air Freshener Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Mohamed (2010) Design Of Rigid Board Material From Banana Tree Trunk Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli, Salim (2012) Dynamic Analysis Of Laminated Rubber-Metal Spring On High-Rise Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Huzaifa (2016) A Study Of Cobalt Catalyst Preparation For Carbon Nanotube Powder Growth By Using Alcohol Catalytic Chemical Vapor Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmil , Ariffin (2008) Assessment Of Working Posture At Different Workstation Design For Socket Adapter Assembly Using RULA Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Dzul Fahmi, Mohd Zawawi (2007) Development Of RFID Database Handling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ermin Alif, Norsani (2013) Human Motion Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Eshra Helmy , Abdul Rahim (2007) A Real Time Barcode Reader For Laboratory Attendance (Hardware). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadhillah , Mohamad (2006) Design A Strain Demonstration Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Mustapha (2007) Investigation Of Mechanical Properties Of Parts Produced Using 3D Printing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faez, Saharudin (2009) A Study On Impact Response Of Advanced Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Mohd Saisi (2015) Smart sensor system for argicultural. Project Report. UTeM. (Submitted)

Mohd Faizal, Ghazali (2012) Application Palm Kernel Shell Charcoal In Steel Carburizing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizuddin, Mohamed (2011) Merekabentuk Rasuk Untuk Menganalisis Sifat Ketegangan Tekanan Dengan Menggunakan Tolok Terikan Untuk Rasuk Berlainan Bahan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fakhruddin, Abdullah (2013) Corrosion Failure Analysis Of Weldment Area At Internal Surface Of Carbon Steel Pipe Used In Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Othman (2009) Pembangunan Bahan Bangunan Penjimatan Tenaga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Mohd Noor (2006) Penyelidikan Tentang Kelakuan Elektrokimia Bagi Keluli Lembut Di Dalam Persekitaran Akueus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fitri, Mustapha (2015) Determination Of Defect And Mechanical Properties For Tungsten Inert Gas (TIG) Welded Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuad, Mohammad Nur Taufiq (2016) Investigation Of Wear Mechanism On The Ball Bearing Tested By Nano-Oil Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fuad , Ibrahim (2013) Corrosion analysis of internal surface of carbon steel natural gas piping. Masters thesis, UTeM.

Mohd Ghazali kadir, Sulaiman (2014) Fatigue life prediction model for fiber reinforced polymer composites. Project Report. UTeM. (Submitted)

Mohd Hafeez, Awang Hamat (2009) Modal Analysis On Flexible Plate Structure Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Yaacob (2015) Ultilizing Bamboo As A Non-Fibrous Sound Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafrez Razi, Ab Razak (2014) Electrophoretic Deposition And Annealing Of Poly (vinylidene fluoride)-Graphite Laminated Composite Film. Project Report. UTeM. (Submitted)

Mohd Hairi Fifi, Mansor (2010) Damaged Identification Of Mechanical System via Changes In Their Vibration Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairol Azaha , Jaafar (2014) Design and manufacture of recurve bow riser using fused deposition modeling (FDM) and fiber-reinforced composite material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairudin , Jaffri (2007) Infrared Distance/Height Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairul Anuar, Jasmi (2007) Kajian Kesan Hentaman Terhadap Komposit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanafi, Suhaimi (2008) Analysis Of Porosity And Its Effect On Mullite Bonded Silicon Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haslay, Ahmad (2010) Investigation On Microstructure Behavior And Haz Hardness Of Stainlees Steel AISI304 At Different Filler Wire Diameter And Volatge Using MIG Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hatta, Maziati Akmal and Al-Amani, Umar and Abdul Rashid, Mohd Warkih and Azmi, Nurul Azuwa (2015) Preliminary study of KNN thin films doped by rare-earths for sensor applications. In: Mechanical Engineering Research Day 2015, 31 March 2015, Technology Campus, UTeM.

Mohd Hazlan, Harun (2010) Application Of Finite Element Analysis (FEA) To Analyze The Effect Of Different Electrode Size In MIG Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazrin, Mohd Ibrahim Khan (2015) The Effect Of Axial Crack Length On The Plastic Buckling Of Relatively Thick Cylinder Subjected To Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi, Md Salleh (2012) Analysis On CAD Data Obtained From Non-Contact Reverse Engineering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi , Hamidin (2007) Sistem Penderia Partikel Habuk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmie, Asnan (2012) Strategy For Milling Thin-Wall Low Rigidity Curve Shape Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmy , Hassan (2007) Redesign A Baby Pushchair Through Concurrent Engineering Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hishamuddin , Daud (2007) Aliran Bendalir Sekeliling Hidrofoil Dengan Menggunakan Kaedah Simulasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idham Khalid , Abu Hasan (2013) Numerical study of fluid and heat transfer in mixing elbow. Project Report. UTeM. (Submitted)

Mohd Ikhwan, Ishak (2014) The effect of carbon content (WT%) to the mechanical and thermal properties of recycle glass ceramic. Project Report. UTeM. (Submitted)

Mohd Ikram , Kamarulzaman (2007) Hardware Development Of Barcode Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irman, Ramli (2008) The Evaluation of Mechanical Properties and HAZ Analysis of Austenitic Stainless Steel AISI 304L Weldments. Masters thesis, Coventry University.

Mohd Ishak, Noordiana and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan (2017) Weighting Of Natural Fibre Criteria For Fibre Metal Laminate Using Entropy Method For Car Front Hood Utilization. Key Engineering Materials, 740. pp. 75-80. ISSN 1662-9795

Mohd Izwan , Jaafar (2014) Effect of chemical modification on tensile properties of thermoplastic reinforced communication for out of condition aerospace grade carbon fiber prepreg waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Junaidi, Yusuf (2015) Effect Of Sliding Speed On Tribological Properties Of Palm Kernel Avtivated Carbon-Epoxy (PKAC-E) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Juzaila, Abd Latif (2005) Numerical Modelling Of Anisotropic Elastic Material At Small And Finite Strains. Masters thesis, University of Wales Swansea.

Mohd Kamarul Nizam, Abdul Hamid (2009) Optimization Of Measurement Parameters In Non-Contact Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kasmie, Abdul Halim (2009) A Non-Destructive Crack Detection Technique Using Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khaidin , Mohd Nor (2014) Effect of sintering parameter in copper based alloys metal matrix composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairi , Mamat (2007) Pengesanan Retak Lesu Dalam Aloi Tempatan Dengan Menggunakan Teknik Pemeriksaan Visual. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairir , Ismail and Md Radzai, Said (2011) Quasi-Static Failure Of Paper Honeycomb Sandwich Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairol Azizin, Toing (2010) Smart Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Sharil , Mustaq Ahmad (2014) Green magnetite nanocomposite sheet using coprecipitation loading method as a wave absorber in RFID applications. Masters thesis, UTeM.

Mohd Lutfi, Nordin (2010) Study The Effect Of Heat Treatment Temperature And Time On Carbide Formation And Hardness Variation Of Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Mohammad Mahbor (2010) Analysis And Modelling Of Projectile Motion With Air Resistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najmi, Abdullah Sani (2009) Effect Of Heat Treatment Process Of Titanium For Watch Manufacturing Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nashrol, Mohd Nawi (2012) Design And Ergonomics Analysis Of UTeM Bus Cockpit Arrangement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasrul, Muhammad Adam (2008) Penentuan Jangkahayat Kelesuan Terhadap Keluli Tahan Karat Di Bawah Pengaruh Suhu Yang Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazizi, Sungip (2009) Retrogression And Reaging (RRA) Treatment Process And The Effect On Microstructure And Mechanical Properties Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizar, Zainun (2014) Computer Vision Based Barcode Reader For Halal JAKIM Verification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Asril , Saadun (2014) The Effects Of Heat For Contaminant Removal From Different Shapes Of Cavity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor Ikhwan, Mohd Fauzi (2009) Noise Insulator From Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azam, Uzair (2016) Development Of Measuring Device With Memory Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Effendy, Nek Man (2013) Engineering Analysis On Spreader Beam By Using Manual Calculation And Solidworks Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norazzim, Mohd Hashim (2012) New Cutter Design To Minimize Part Deflection In Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Nur Azmi, Nordin (2010) Effect Of Nanoclay Loading On Mechanical Properties Of Nanocomposites. Masters thesis, Yamaguchi University.

Mohd Nur Azmi, Nordin (2015) Fatigue Fracture Properties Of Nanoclay And Wood Plastic Composites. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nur Ikhwan, Abdul Samad (2015) The Effect Of Silane Coupling Agent On The Tribological Properties Of Recycled Carbon Fiber Reinforced Polypropylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nursarhan , Rosdi (2008) Fabrikasi Dan Analisis Komposit Diperkuat Gentian Di Bawah Beban Paksi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Radzai, Said and Amzatul Akmam, Mokhtar (2006) The Quasi-Static Loading Of Local Wood Fiber Filled Rolled Thin Tubes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Mohamad (2005) A comparative study of continuous wave and pulsed wave Coz lazer cutting of a polymer matrix composite material. In: Conference On Advanced Materials, (ATCi2005), 6 - 8 December, 2005, Putrajaya, Malaysia. (Submitted)

Mohd Razali, Muhamad and Norizah , Mohamad and H., Hussain and A.R., Songi and S.N., Othman (2004) Collaborative product development implementation between Malaysian auto suppliers and their customer. In: Proceedings of the 2'' llEC- 2004, 19-20 December, 2004, Riyadh, Kingdom of Saudi Arabia. (Submitted)

Mohd Razi, Supeno (2006) Buckling Behaviour Of Thin Walled Angle Section Beam Subjected To Pure Bending Moment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Salamun (2013) Additive Manufacturing For Ergonomic Improvement Of Knee Support Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Abd Rahim (2015) Kesan Jenis Anak Gelombang (Wavelet) Di Dalam Pengesanan Kerosakan Gear Bagi Isyarat Getaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzwanil Hanif, Ruslan (2013) Materials Selection For Conceptual Automotive Hood Design Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rody , Mohamad Zin (2010) Numerical Study of Droplet Dynamics on Solid Surface. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 2 (2). pp. 92-100. ISSN 2180-1053

Mohd Rosli, Mohd Afzanizam and Misha, Suhaimi and Sopian, Kamaruzzaman and Mat, Sohif and Sulaiman, M. Yusof and Salleh, Elias @ Ilias (2014) The effects of thermal conductivity on photovoltaic thermal collector sheet in tube type. World Applied Sciences Journal, 31 (4). pp. 625-629. ISSN 1818-4952

Mohd Rosli, z.m.rosli and Kwan, Wai Loon and Jariah, Mohamad Juoi and Nafarizal , Nayan and Zainab , Mahamud and Yusliza, Yusuf (2013) Characterization of TiAlBN Nanocomposite Coating deposited via Radio Frequency Magnetron Sputtering using Single Hot-Pressed Target. Advanced Materials Research, Vol. 626 (2013). pp. 298-301. ISSN 1022-6680

Mohd Rosli, Mohd Afzanizam (2016) Pembangunan Dan Kajian Prestasi Lapangan Pengumpul Polimer Dan Fotovoltan Terma (PVT) Polimer Di Malaysia. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rusdy , Yaacob (2014) Study of the performance of XBee modules’ communication in clear line of sight with different mounting elevations in viral advertisement system. In: International Conference on “Multidisciplinary Trends In Academic Research” 2014, 29-30 September 2014, Holiday Inn Silom, Bangkok.

Mohd Rusdy , Yaacob and Lim , Wee Teck and Nik Anwar, Nik Syahrim (2013) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Rusdy , Yaacob and Lim , Wee Teck and Nik Anwar, Nik Syahrim (2014) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. Advanced Materials Research. pp. 303-308. ISSN 1662-8985

Mohd Rusdy , Yaacob and Miskon, Muhammad Fahmi and Chan, Xin Zhi (2014) Study on the Accuracy of Tree’s Diameter Measurement by Laser Range Finder System. In: national conference on agricultural and food mechanization 2014, 20 - 22 May 2014, sutera Harbour Resort, Kota Kinabalu.

Mohd Rusdy , Yaacob and Nik Anwar, Nik Syahrim (2011) Effect of Reflective Objects of Different Colors to the Output Voltage-Distance Characteristics of Sharp GP2D120 IR Sensor. In: MUiCET 2011, 2011, Batu Pahat, Johor.

Mohd Rusdy , Yaacob and Yusuf Lada, Musa (2012) STUDY ON THE LOAD DISTRIBUTION BY A CHARGE CONTROLLER OF A PASSIVE SOLAR GREENHOUSE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Mohd Rusdy , Yaacob and Anuar , Mohamed Kassim and Lim , Wee Teck (2013) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Rusydi, Mohd Salleh (2011) Analog Active Noise Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saat, Fatimah Al Zahrah and Zhibin, Yu and Jaworski, Artur (2011) CFD-assisted regenerator analysis: application to thermoacoustic system. In: The 23rd IIR International Congress of Refrigeration, 21-26 August 2011, Prague, Czech Republic.

Mohd Salleh, Mohd Azdhari (2015) Analysis On Kenaf Fiber Effect Toward Compression Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Siti Hasmah and Othman, Mohd Azlishah and Ali, Nadhirah and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Abd Aziz, Mohamad Zoinol Abidin (2015) Microwave Imaging Technique Using UWB Signal For Breast Cancer Detection. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 723-727. ISSN 1819-6608

Mohd Seiful Ezuan, Sayuti (2010) Direct Metal Deposition Of Stainless Steel Using Wire Feed Method : An Experimental Study On Microstructural Development And Microhardness Variations. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaffran , Zainal Rashid (2008) Product Development Using Reverse Engineering (RE) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaffran , Zainal Rashid (2008) Product Development Using Reverse Engineering (RE) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shafiee, Mohd Khusyairi Azwan (2008) The Effect Of Lead/Graphite On Aircraft Grade Aluminum Alloy Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Ali, Nursabillilah and Mohd Aras, Mohd Shahrieel and Wasbari, Faizil and Omar, Zakarya Ali Ahmed (2017) A 3D Mapping Of The Surrounding Object Using Stereo-Vision Technique. International Journal of Soft Computing and Engineering (IJSCE), 12 (1). pp. 59-65. ISSN 1816-9503

Mohd Shahfizal, Ruslan and Kamal, Othman and Jaharah, A.Ghani and Mohd Shahir, Kasim and Che Hassan, Che Haron (2016) Surface Roughness Of Magnesium Alloy AZ91D In High Speed Milling. Jurnal Teknologi, 78 (6-9). pp. 115-119. ISSN 0127-9696

Mohd Shahril Amin, Bistamam (2015) Parameteric Study Of Aligned Carbon Nanotube Growth Using Alcohol Catalytic Chemical Vapor Deposition Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shahrul, Mohd Noor (2008) The Study Of Corrosion On Surface Metal Of Aluminum Alloy (6063) At Window And Door Frame. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzuan, Ismail (2011) Development Of Automotive Louver Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzuan, Ismail (2011) Development Of Automotive Louver Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shapian , Mohd Shuzaily (2008) Ergonomics Analysis Design Of Computer Table For CAD/CAM Laboratory In FKP, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazwan , Mohd Alias (2008) Analysis Of Human Hand Strength For Griping Activity In CNC Machihing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Suffian, Mohd Thani (2008) Experimental And Finite Element Analysis Of Fracture Behavior Of Fiber Reinforced Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sukri Sazlan , Sapee (2010) Study The Effect Of Different Process Of The Mechanical And Physical Properties On The Coconut Coir Fiber Reinforced LDPE Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syauqee, Mohd (2010) The Application Of Voice Verification For Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tajuddin , Haron (2007) The Development Of Modular Product Design : Book Shelves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yassin, Muhammad Arief (2016) A Study On The Challenges Of New Technology Adoption By Composite Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuhazri, Yaakob and Hasoloan Haery, Ian Pieter and Masni Azian, Akiah (2011) Research and Development of Synthetic and Natural Core Towards Hybrid Sandwich Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuhazri, Yaakob (2011) Bio-Composite Kenaf Fibres For Pallet Product. Project Report. UTeM. (Submitted)

Mohd Yuhazri , Yaakob and Tajul Ariffin , Abdullah and A. Perumal, Puvanasvaran (2011) Research & Development Of Varim Technique For Thermostat Composite Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff , Salleh (2007) Finite Difference Simulation Of A Flexible Rectangular Plate Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusry , Mahamad Ghaus (2007) The Energy Absorption Of Circular Multirings Subjected To Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaid, Faizzati (2016) Hand Signal Detection Using Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaidi, Ahmad Sofian (2013) Automated Platform For Component Selection For Designing Manufacturing System Facility. Project Report. UTeM, Melaka. (Submitted)

Mohd Zaidi, Ahmad Sofian (2013) Automated Platform For Component Selection For Designing Manufacturing System Facility. Project Report. UTeM, Melaka. (Submitted)

Mohd Zaki, Zakaria (2008) Reban Ayam Elektronik. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zamzury , Abdullah Sani (2008) Attendance Mangement System Using Fingerprint Scanner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Zarul Hazim, Norudin (2010) Product Development Of Semi Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zarul Hazim, Norudin (2010) Product Development Of Semi Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohamad Azuan (2014) Design analysis of thin walled aluminium 7075 aircraft parts. Project Report. UTeM. (Submitted)

Mohd Zulfadli, Amiruddin (2008) Crack Analysis In Weld Joints Of Pipes In The Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Motea , Zakarya Mohammed Nasser Saleh (2016) Development Of Vision-Based Anomaly Detection System In A Dynamic Environment Using Background Subtraction. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mu'ath Ibrahim Mohammad Jarrah , Mohammad Jarrah (2014) Optimization of physical vapour deposition coating process parameters using genetic algorithm. Masters thesis, UTeM.

Muda, A. K. (2009) Mining Generalized Features for Writer Identification. In: International Conference on Data Mining and Optimization, 27-28 October, 2009, Selangor.

Muda, A. K. and Shamsuddin, S. M. and Abraham, A. (2009) Authorship Invarianceness for Writer Identification. In: International Conference on Biometrics and Kansei Engineering ICBAKE2009, 25 - 28, June 2009, Cieszyn, Czech Republic.

Muda, A. K. and Pratama, S. F. and Yun-Huoy, C. and Muda, N. A. (2011) Selecting Significant Features for Authorship Invarianceness in Writer Identification. In: Springer - Software Engineering and Computer Systems ICSECS 2011, 27 - 29 June, 2011, Pahang, Malaysia.

Muda, A. K. and Shamsuddin, S. M. and Abraham, A. (2010) Improvement of Authorship Invarianceness for Individuality Representation in Writer Identification. International Journal on Non-Standard Computing and Artificial Intelligence - Neural Network World. pp. 371-387. ISSN 1210-0552

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2008) DISCRETIZATION OF INTEGRATED MOMENT INVARIANTS FOR WRITER IDENTIFICATION. In: International Conference on Advances in Computer Science and Technology ACST2008, 2 - 4 April, 2008, Langkawi, Malaysia.

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2007) Embedded Scale United Moment Invariant for Identification of Handwriting Individuality. In: International Conference on Computational Science and Its Applications - ICCSA 2007, Kuala Lumpur, Malaysia.

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2007) Invarianceness of Higher Order United Scaled-Invariants. International Journal of Advances in Computer Science and Engineering. ISSN 0973-6999

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2008) Invariants Discretization for Individuality Representation in Handwritten Authorship. In: 2nd International Workshop on Computational Forensics - IWCF2008, 7 - August, 2008, Washington DC, .

Muda, A. K. and Shamsuddin, S. M. (2005) A Framework of Artificial Immune System in Writer Identification. In: International Symposium of Bio-inspired Computing, 5 - 7 Sept, 2005, Johor Bahru, Malaysia.

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2006) Bio-Inspired Generalized Global Shape Approach for Writer Identification. In: INTERNATIONAL ENFORMATIKA CONFERENCE, 24 - 26 Nov, 2006, Venice, Italy.

Muda, N. A. and Ahmad, S. and Muda, A. K. (2011) Recognizing Patterns of Music Signals to Songs Classification Using Modified AIS-Based Classifier. In: Springer - Software Engineering and Computer Systems ICSECS 2011, 27 - 29 June, 2011, Pahang, Malaysia.

Muhamad Akmal , Mohammad Din (2015) Variation of doping type for sige optical modular with NPN configuration. Project Report. UTeM. (Submitted)

Muhamad Aszahare, Abdul (2015) Kesan Bebanan Keluli Tahan Karat Terhadap Ciri-Ciri Komposit Grafit Polipropilena Untuk Plat Dwi Kutub. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faisal, Omar (2011) Work Related Musculoskeletal Disorder Assessment Of Jointing Cable Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Firdauz, Abd. Rasid (2009) The Effect Of Probe Type In Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafiz, Hj.Ithnan (2008) Kajian Sifat Kelesuan Bagi Logam Aloi Karbon Rendah Dengan Dan Tanpa Penambahan Karbida Melalui Ujian Kelesuan Menggunakan Daya Tegangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafizuddin, Mohd Ridowan (2010) The Design Of A Pre-Assembly Of Blood Collection Tube Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hazrul, Mohd Norddin (2015) A Study On The Sustainability Programs And Practices, Legislative Compliance And The Benefits Of Production Losses Elimination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairolnain, Ghazali (2011) A Study Of Thermal Barrier Coating TBCs For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairudin, Mohamad Rus (2015) Investigation of Mechanical Properties For The Dry Carbon Composite Fabricated By Using Resin Transfer Molding Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairyl Fitri, Mohd Mokhtar (2015) Analytical Modelling And Free Vibration Analysis Of Rectangular Plate With An Arbitrarily Oriented Surface Crack. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khaizaki, Ahmad (2015) Reaction Mechanism Of Electroless Quaternary Nickel Alloy Deposition On Fe Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khaleel Alyasini, Abdullah (2006) Development Of Image Compression Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Najmi, Ahmad Salbi (2015) Wireless Barcode Scanner For Self-Checkout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nor, Nor Amalina (2016) Effect Of Agitation Rate And Reaction Temperature On The Size Of Linseed Oil Microcapsule Self-Healing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Norazamudin, Noordin (2015) The Human Analysis And Ergonomics For The Seat Design Of Electric Scooter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nur Arsh, Mohamad Basir (2007) Design Of An Aid To Assist Handicap/Old People To Toilet/ Shower. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Roslan, Darul Aman (2011) Investigation On Vertical Excitation Of The Structural Integrity In High-Rise Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Shahirul, Mat Jusoh and Mohd Yazid, Yahya and Nur Izan Syahriah, Hussein (2016) The Effect Of Fibre Layering Pattern In Resisting Bending Loads Of Natural Fibre-Based Hybrid Composite Materials. MATEC Web Of Conferences, 39. 01005-1-01005-6. ISSN 2261-236X

Muhamad Syafiq, Md Najib (2013) Investigation on oil palm fiber composite mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhamad Yazid, Abd Latif (2010) Producing Calcium Copper Manganese Oxide (CaCu3Mn4012) Via Wet-Chemistry Technique (Percipitation Technique). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yazid, Abd Latif (2010) Producing Calcium Copper Manganese Oxide via Wet Chemistry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yusri , Kabol (2008) Eksperimen Dan Analisis Unsur Terhingga Tiga Titik Kelenturan Komposit Diperkuat Gentian. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zaid, Jamal (2009) Design And Development Of Finger Based Exerciser Device For Computer Games Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zamri , Jamaluddin (2006) Flow Optimization Of Koi Pond Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad 'Ammar, Che Mahzan (2015) Effect Of Stamping Parameters Of The Spring-Back Behaviour Of Oil Palm Fibre Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad 'Izzat Syahmi , Firdaus (2014) Effects of rubber seed shell microparticle addition on polypropylene/kenaf composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Arsat (2015) Sound Absorption Performance Of Acrylic Based Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akif, Mohd Yahya (2015) The Influence Of Crack On The Buckling Of Axially Compressed Truncated Cones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akmal Akif , Muhammad Wazir (2013) Experimental of flow measurement over different shape of cavities for low reynolds number. Project Report. UTeM. (Submitted)

Muhammad Alif, Abd Aziz (2015) Electroless Quaternary Ni-Co-Cu-P Deposition On Fe Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif, Daud (2015) An Assessment Of Cylinder Deactivation System Applied To Closable Intake Ports In A Small Si Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyrafuddin, Hanafiah (2011) Development Of An Automotive Parking Brake Actuator Using Shape Memory Alloy (SMA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azrul Amin, Jamaluddin (2011) Development Of Automotive Side Mirror Actuator Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Erwan , Mohd Kamal (2004) Load Displacement On Multi-Hexagonal Rings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi, Noordin (2015) Reed Grass As Sustainable Sound Absorber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faisal, Jusoh (2008) Penentuan Jangkahayat Lesu Bagi Keluli Lembut Di Bawah Pengaruh Suhu Berbeza. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Mohd Timyati (2009) Effect Of Surface Finish On Fatigue Life Of Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz Hafizuddin, Mohd Nawi (2015) Fiber Optic Sensor For Palm Oil Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faizal, Md Ali (2013) Automatic Lamp Illumination System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fared , Rosly (2011) Design And Develop Roofing Mould Using Rice Husk Bio Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faris, Md Yusuf (2009) Design And Development Of Automated Counting Machine For Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fikri , Zulkeflee (2014) Effect loading force and number of observation accuracy of inconel 718. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaous, Ismail (2009) Ergonomic Design Of A Baby Highchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Jumahat (2015) Effect Of Mixing Ratio Of Polypropylene/ Polyethylene And Paraffin Wax On Its Mechanical Properties Using Internal Batch Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Jamal (2007) The Study Of Multi-Rectangular Ring Under Quasi-Static Loading. Project Report. Melaka, Malaysia, UTeM. (Submitted)

Muhammad Firdhaus, Ibrahim (2011) Development Of Car Wiper Lifter Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdhaus, Ibrahim (2011) Development Of Car Wiper Lifter Using Shape Memory Alloy (SMA) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizi, Zainal Abidin (2010) To Design and fabricate projectile motion prototype device for students Use In Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanafi , Chee Pi (2007) Design Three Dimensionally Adustable Head Rest (TDAHR) For Car Seats. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Harith, Ezuddin (2015) Study Of Corrosion Resistance And Wear Behavior Of Sol Gel Coating On AA7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Helmy Haqqim, Mohd Suhaimi (2014) Design and analysis of an instrument to test reading interpreting drawing skills. Project Report. UTeM. (Submitted)

Muhammad Hilmi, Hassim (2011) A Study Of Flow Pattern In Autoclave Using Computational Fluid Dynamics (CFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hilmi Ruzaini , Hashim (2013) Investigation on the effect of recycling palm fiber composite on the mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hishamuddin , Abd Wahab (2014) Electrical Discharge Machining (EDM) of Reaction Bonded Silicon Carbide (RB-SiC). Project Report. UTeM. (Submitted)

Muhammad Hizran, Kamaludin (2015) Development Of Pack Boronizing For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ismail, Ahmad (2015) Defect Detection On The Metal Surface By Using Machine Vision Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairul Nizam, Saaey (2013) Effect Of Particulate Reinforcement On The Wear Properties Of Mg-Al Nano Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nabil, Mohammed Sufian (2015) The Experimental Investigation Of Fatigue Test For Spot Welded Structural Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nur Azuan, Kamaruddin (2014) Eco design study of aluminium alloy 5052-H32 and aluminium alloy 6061 for recreational airboat. Project Report. UTeM. (Submitted)

Muhammad Nur Ilham, Ibrahim (2015) Segmentation Of Jawi Handwritten Words Into Subwords. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nursyafiq , Abdul Rahman (2014) Carbon nanofibers assisted conventional EDM on stainless steel. Project Report. UTeM. (Submitted)

Muhammad Ridzwan , Zulkifli (2009) Ramalan Hayat Lesu Bagi Kimpalan Plat Keluli Lembut. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shahid , Suhaimi (2015) Design and analysis of automotive component for aluminium alloy casting. Project Report. UTeM. (Submitted)

Muhammad Shazwan, Abdul Razak (2015) Effect Of Size PZT Elements On The Excitation Of Phased Array Tranducer In Beam Steering And Beam Focusing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syamil, Junid (2008) The Fabrication Of Porous Ceramic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syazwan, Rosidi (2015) Performance Analysis On The Effects Of Filler Material On HDPE Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Taufiq, Ahmad (2015) Thulium-Doped Fiber As Gain Medium And Saturable Absorber For Pulsed Fiber Laser. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Zaid, Saleh (2012) Tool Path Compensation Strategy For Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zharif , Ismail (2006) A Virtual Instrumentation System For Electric Machines Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zhariff Izwan, Mohd Suhaimi (2012) Kajian Pengesanan Dilaminasi Pada Struktur Bahan Komposit Menggunakan Kaedah Masa, Frekuensi Dan Masa Frekuensi-. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zuhair Bolqiah, Edris (2013) SIRIM Counterfeit Sticker Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Hafiz, Abd Kadir (2011) Kajian Proses Pemanasan Dan Penyejukan Seramik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Mustafa, Ghazali (2005) Product Design Consideration For Short Glass Fiber Reinforced Composite Brake Pedal Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nasae , Mahyuddin (2009) Design And Analysis Of Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nurulhafizan, Mahat (2008) Time And Temperature Effects On Fracture Properties Of Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Ridzuan , Mansor (2014) Concurrent conceptual design of hybrid natural/glass fiber reinforced thermoplastic composites for automotive parking brake lever. PhD thesis, Universiti Teknikal Malaysia Melaka.

Murni Illiana , Asan (2011) New Proposed Filter With Boundary Function For Image Restoration Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Haslinda and Safri, Nursyairalia and Yunus, Ahmad Rozelan and OTHMAN , MOHD AZLISHAH (2016) The Characteristics of Users in the Adoption of Low Loss Microwaves Transmission Glass: A Conceptual Paper. Procedia - Social and Behavioral Sciences. pp. 548-554. ISSN 1877-0428

Mustafa, Zaleha B. and Tanner, K.E (2012) Composites for hard tissue repair. In: Wiley Encyclopedia of Composites. John Wiley & Sons, Inc., pp. 1-14.

Mustaffa, Izadora (2013) The effect of sound levels on attention deficit. In: 2013 International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering, 7-8 November 2013, Bandung Indonesia.

mohamad, ahmad kamely and sued, mohammad kamil and chong, wan chin (2011) Mathematical Modeling of Surface Roughness in Surface Grinding Operation. International Journal of Engineering and Natural Sciences , 5 (3). pp. 146-149. ISSN 2010-4014

mohamad, ahmad kamely and sued, mohammad kamil and chong, wan chin (2011) Mathematical Modeling of Surface Roughness in Surface Grinding Operation. A mathematical model of the surface roughness, 5 (3). pp. 146-149. ISSN 2010-4014

N

Nabiha, Pathil (2015) Finite Element Analysis Of Strain Signal From Charpy Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nabila Aini , Abdul Rahman (2011) Profile Imaging Of Conveying Pipe Via Fan Beam Projection Of Ultrasonic Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadarajan, Kalegeswaree (2016) Development Of Smart Communication Tool For Assisting Stroke Patient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadlene, Razali (2010) Determination Of The Flow Curve Of Necking Tensile Specimen. Masters thesis, Universiti Teknologi Malaysia.

Nadlene , Razali (2010) Determination Of The Flow Curve Of Necking Tensile Specimen. Masters thesis, Universiti Teknologi Malaysia.

Naemah, Ayub (2011) Application Of Palm Waste Product For Raw Materials In Organic Brake Friction Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najwa Syafiqah, Samhudi (2015) Fiber Optic Sensor Of Temperature Measurement For Tunnel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nantha, Muniandy (2008) Mechanical Properties Of Wood Plastic Composite (WPC) Made Of Recycled High Density Polyethylene (HDPE) And Recycled Wood Flour (RWF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Napi, Fauziah (2016) Circuit Defects Detection Of Flexible Printed Circuit By Electrophoretic Deposition Of Organic DYE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasir, Nurulhilmi Zaiedah and Mohd Daud, Mohd Ahadlin and Bapokutty, Omar and Din, Abdul Talib and Selamat, Mohd Zulkefli (2015) Influence of Heat Treatment on Impact, Hardness and Fatigue Strength of 6061 Aluminium Alloy. Applied Mechanics and Materials , 761 (-). pp. 484-488. ISSN 1662-7482

Nasir, Nurulhilmi Zaiedah and Mohd Daud, Mohd Ahadlin and Selamat, Mohd Zulkefli and Rivai, Ahmad and Dhar malingam, Sivakumar (2015) The Effect Of Heat Treatment On Fatigue And Mechanical Properties Of 6061 Aluminium Alloy. Applied Mechanics and Materials, 699 (-). pp. 227-232. ISSN 1660-9336

Nasruddin , Abu Sari and A. , Asmala and Mohd Yazid , Abu Sari and S. , Sahib and A. W. , Rasib (2015) Development of rapid low-cost lars platform for oil palm plantation. Jurnal Teknologi , 77 (26). pp. 51-57. ISSN 2180-3722

Nasrul , Harun (2007) Evaluation Of The Capability Of The CFX Computational Fluid Dynamic In The Prediction Of KOI Pond Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Natasha, Abd Hamid (2015) Performance Analysis Of Interpolations Method For Mobile Image Sharing Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazarail, Ab Majid (2010) Tensile Fracture Behavior On Temepred AISI 1040 Medium Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazliah, Abdul (2008) Study On Tempering Effects In Gas Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazran, Ahmad Sufian (2012) Merekabentuk Dan Menganalisis Jisim Optimum Pada Kawalan Lengan Atas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazurah, Ismaun (2015) Development Out-Of-Plane Of Face Detection Using Surf And Skin Color YCbCr Color Space Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nermie, Dickson (2012) The Effect Of Primary Relief Angle To The Dimensional Surface Error Of Thin-Wall Components. Project Report. UTeM, Melaka. (Submitted)

Ng, Guan Yao (2010) The Effect Of Coupling Agent Addition To The Mechanical Properties Of Wood Plastic Composite (WPC) Made Of Recycled High Density Polyethylene (RHDPE) And Recycled Wood Flour (RWF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shu Tyng (2009) Development Of Computational Model Through Reverse Engineering : Car Side Mirror Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Guan Yao (2014) Characterization Of Oil Retrogression Of Aluminum Alloy 7075. Masters thesis, Universiti Teknikal Malaysia Melaka..

Ng, L.F and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence Of Kenaf Fibre Orientation Effect On The Mechanical Properties Of Hybrid Structure Of Fibre Metal Laminate. Pertanika Journal of Science & Technology, 25 (-). pp. 1-8. ISSN 0128-7680

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli (2017) Fatigue Performance Of Hybrid Fibre Metal Laminate Structure. International Review of Mechanical Engineering, 11 (1). pp. 61-68. ISSN 1970 - 8734

Ng, Poh Kiat (2015) Effects Of Torque Direction, Shape, Size, Sensation And Technique On Pinch Force. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ngadiman, M. Y. and Hussin, B. and Abdul Majid, I. (2011) A STUDY OF HUMAN SKILL ACHIEVEMENT IN MALAYSIAN PUBLIC UNIVERSITIES: KNOWLEDGE, SKILL AND ATTITUDE. In: INTERNATIONAL CONFERENCE ON MANAGEMENT (ICM 2011) , 13-14 June 2011, Hydro Hotel, Penang, Malaysia.

Ngu, Ung Hie (2016) Effect Of Fibre Size And Sample Thickness On Kenaf Core As A Potential Acoustical Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nie Nasuriana , Sidek (2008) Developing A Face Recognition Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nik Faiz , Nik Ab Wahab (2008) The Effects Of Heat Treatments On The Mechanical Properties Of Law Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Haidar, Nik Abdullah (2009) The Effect Of Woven Glass Lay-Up Orientation On Flexural Strength Of Laminated Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohamad Azren, Mohd Zubir (2014) Influence of solution process parameter to cobalt catalyst thin film and particle formation. Project Report. UTeM. (Submitted)

Nik Mohd Hanif, Nik Alwi (2008) Pembangunan Platform Penyelidikan Hidraulik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Zulfalah, Nik Hussin (2006) Analysis Of The Riveted Joint Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Muhamad Arif, Nik Mohammad (2015) Ergonomics And Flexible Shoe Insole. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Norzaliza , Long Hassan (2008) Fabrication Of Strontium Ferrite Magnetic Material Through Wet Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Nozita , Mohd Saad (2009) Fiber Optic Microbend Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Akmar, Hassan (2008) Gas Carburizing Effects On Impact Toughness Of Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Aliah, Nordin (2008) Design And Analysis Of Sandwich Beam Make By Combination Of Kenaf Core And Bast. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ashikin , Jamil (2013) The effect of heat treatment on the microstructure and mechanical properties of 6061 aluminium alloy. Project Report. UTeM, Melaka. (Submitted)

Noor Azamiah, Md Fauzi (2013) Design Of Nonlinear Frequency Selective Limiter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azwan, Shairi (2012) Adjacent channel rejection analysis due to channel select filter in RF superheterodyne receiver of WLAN IEEE 802.11a. In: Research and Development (SCOReD), 2012 IEEE Student Conference on , 5-6 Dec 2012, Pulau Pinang .

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong (2013) Bandstop To Allpass Reconfigurable Filter Technique In SPDT Switch Design. Progress In Electromagnetics Research C, 39. pp. 265-277. ISSN 1937-8718

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong (2012) The potential application of switchable matched parallel-coupled stub resonator in SPDT discrete switch design. In: Applied Electromagnetics (APACE), 2012 IEEE Asia-Pacific Conference on , 11-13 Dec 2012, Melaka.

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong and Zakaria, Zahriladha (2013) Design and Analysis of Isolation Improvement and Compact Size of SPDT Switch with Switchable Open Stub Resonator for Wireless Communication. International Journal of Electronics and Computer Science Engineering, 2 (1). pp. 9-17. ISSN 22771956

Noor Azwani, Mat Zin (2011) Analysis Of Material Stiffness Effect Against Nonlinear Acoustic Wave Modulation Intensity-Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Diana, Mohd Diah (2009) CMM's Stylus Approach Direction Effect On Error Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Eman, Utok (2015) Design Optimization Of Stiffened Square Plate Under Uniformly Distributed Pressure Of 5 Pascal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Fakhrezah, Matdiris (2012) Experimental Study Of Femur Bone Under Normal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Farazdillah, Ismail (2009) Production Efficiency Enhancement Using Improved Working Posture Of Material Handling Activity In Furniture Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Fariza, Saari (2011) Investigation The Relation Of Crack Modes With Resonances Excitation In Beam Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Fariza, Saari (2015) Variability In Vibration Input Power From The Structure-Borne Sound Sorce On Plate And Beam Structures. Masters thesis, Universiti Teknikal Malaysia Melaka.

Noor Syafiq, Shaari (2009) A Study Of Mechanical Properties In Relation With Morphological Structure Of PP/Kenaf Fiber Reinforced Plastic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Wahidah, Gulam Mahfuze (2010) Experimental Investigation On Sound Transmission Loss Of Acrylic Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooradila, Zaine (2015) Fiber Optic Sensor For Corn Oil Concentration Detection And Optimization Performance Using Analysis Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooraziera Akmal , Sukor (2015) Improved Random Forest For Feature Selection In Writer Identification. Masters thesis, Universiti Teknikal Malaysia Melaka.

Noordin, A. and Salim, M.A. and M. R., Sapiee and Sabikanee, S. and Hasan, M.H.C. and Md. Sani, Z. and Othman, M.H. (2012) Development of a Quadruped Crawling Robot Prototype. In: THE 3RD INTERNATIONAL CONFERENCE ON ENGINEERING & ICT (ICEI2012), 4-5 April 2012, Melaka.

Nor Ain Zuzila, Zolkifly (2015) Performance Comparison Of Out-Of-Plane Facial Detection Using Speeded Up Robust Features (SURF) And Scale Invariant Feature Transform (SIFT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Aishah, Mat Jam (2015) The Investigation Of Flow Distribution In Duct Channel Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Ashykiin, Mohammad (2009) Study On Mechanical Properties And Morphology Of Banana-Glass Fibre Reinforced Polypropylene (PP) Hybrid Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azrin, Nozmi (2007) Effects Of Carburizing On Mechanical Properties Of Low Carbon Steel. Project Report. UTeM, Melaka. (Submitted)

Nor Faizah, Haminudin (2013) Effect Of Nanoclay Loading On Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farhana , Saidina Hamzah (2011) Object Analysis Movement Using Canny Edge Detection (OAMCEDS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafira Nadia, Cm Hatta (2015) Development And Analysis Of Flexible Thermoplastic Composite Laminate For Anti Stabbing Apllications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafizah , Adnan (2008) Mengkaji Kesan Pengaruh Kelembapan Relatif Ke Atas Sifat - Sifat Mekanikal Papan Gentian Berketumpatan Sederhana (MDF) Mengikut Keadaan Persekitaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hafizi, Kamaruzzaman (2011) PET Control : Animal Identifier Using Image Processing Approach (CAT). Project Report. UTeM, Melaka. (Submitted)

Nor Hisham, Nurul Asyikin Ahmad (2016) Synthesis Of Tio2 Nanostructure By Anodic Oxidation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Liana, Salleh (2010) Study On Stress Measurement For Round Bar By Impact Sound. Masters thesis, Takushoku University.

Nor Mas Aina, Md Bohari and Intan Ermahani, A. Jalil and Amir Syarifuddin, Kasim (2009) The Conceptual Development Of Semantic-Based Image Retrieval And Indexing (CBR) Large Object Databases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Narisq Dada Meah, Md Rashid (2007) Pengukur Jarak Tanpa Tali. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Salim, Muhammad (2010) A Study Of Guided Wave Pipe Inspection : Visualization Of Guided Wave Propagation In A Pipe And Defect Imaging With A Scanning Laser Source Technique. Masters thesis, Nagoya Institute of Technology.

Nor Shazwan Azrul, Norazni (2015) Analysis On Surface Texturing Design For Wear Protection Of Automotive Engine Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syafira, Abdul Manaf (2015) Fabrication And Characterization Of High Performance Electrochemical Capacitor Using Vertically Aligned Carbon Nanotube Direct Growth Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nor Syamilah, Samin (2014) The evaluation of non-stochastic lattice structure on drop test application. Project Report. UTeM. (Submitted)

Nor Syazwani Haziqah, Abdul Rahman (2013) Properties Of Chemically Modified Graphene Through Thermal, Compositional And Morphological Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasfadzila, Abu Hassan (2011) Study On The Reverse Engineering (RE) Measurement Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norashsikin, Mohd Arsad (2009) Investigation On The Effect Of Matrix Variation To The Mechanical Properties Of Metal-Metal Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasimah , Dorah (2014) Activated carbon and graphene based electrochemical capacitor in aqueous electrolyte. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasushila , Saleh (2009) Develop Angular Speed Detection System Using Infrared Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norazli, Nordin (2008) The Ergonomic Factor Of A Flexible Writing Table Chair For Left Handed Student. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlin, Ajali (2013) Large Scale Heat Treatment Of Aluminium Alloy 1050 H24 For Forming Process. Project Report. UTeM, Melaka. (Submitted)

Norazlina, Abd Razak and Shahrudin , Zakaria and Farah Shahnaz, Feroz and Hanissah, Mohamad and Yosza, Dasril (2009) Design Of An Image Sensor Based On Conformal Mapping For Face Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazura, Ibrahim (2008) The Effect Of Different Ceramic Filler Loading On The Mechanical Properties Of Polymer Matrix Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordiana, Sidi (2008) Quenching-Tempering Effects On Hardness And Compression Strength Of Carburized Low Alloy Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norehan , Kasiman (2015) Monitoring and evaluation of the effect of crack on the buckling behaviour of welded cylindrical structures. Project Report. UTeM. (Submitted)

Norhazreel Saifullah, Baharin (2015) Design And Analysis Of Jacking Point Structure To Lift Heavy-Weight Crude Oil Tank For Annular Plate Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah , Hashim (2012) Design and analysis of deep drawing die for brass socket by using finite element analysis. Project Report. UTeM, Melaka. (Submitted)

Norhidayah , Mat Yusoff (2008) Hazard Light Using Movement Detector. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norita, Md. Nasir (2008) Mechanical Properties Of Powder-Based Part Produced By 3 Dimensional Printer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norjulia Suriati , Ghazaly (2010) Empty Fruit Bunch Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norjuliana , Abdul Hadi (2009) Performance Of Levenberg-Marquardt Algorithm In Face Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norkhairunisah , Mohamad (2010) Hybrid Composite Using Recycle Plastic Bag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norlezah, Hashim and Chairulsyah, Wasli and Abd Shukur, Ja'afar and Ahmad Sayuthi, Mohamad Shokri and Zulkifli, Shariff (2012) Development Of Fiber Optic Roughnes Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norliana, Azhar (2015) 3D Reconstruction Using Silhouette Coherance For Image Acquisition Under Circular Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norshahira, Mohd Fauzi (2010) Study The Mechanical Properties On Biocomposites Of Kenaf Fibers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nortazi , Sanusi and Sharifah Sakinah, Syed Ahmad (2006) Numerical Methods & Statistics : The Integration Of Theory And Application For Engineering Students Towards Industrial Needs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norwahidah, Abd Wahid (2008) Mapping Corrosion Activities Of Various Type Of Acidic Solution In A Pipe Using Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norzaratul Ain , Ismail (2015) Study The Surface Roughness Of AISI 1045 Carbon Steel By Using Dry CnC Turning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur 'Afifah, Shaiful Bahrin (2015) Design Consideration Of Microheater Structure For Micro Devices Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Adila , Ibrahim (2009) Barcode Recognition System Using Image Processing. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Ainieyantie , Kamaruddin (2009) Assessment Of Whole Body Vibration Exposure Among Metal Stamping Operators. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aisyah , Abdul Aziz (2009) Verification Of Face Image System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Al Hafizuddin , Mohd Arabai (2013) Stamp forming behaviour of palm fiber composite. Project Report. UTeM, Melaka. (Submitted)

Nur Amarina, Mahmood (2015) The Effect Of Coupling Agent On The Mechanical Properties Of PLA-Based Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ameelia, Rosli (2015) Air And Fuel Flow Analysis Of A Single Cylinder Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aqilah, Ya'kob (2013) Synthesis And Characterization Of Light Weight Natural Foam From CSM Coconut Fiber Filled Polyurethane For Acoustic Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asyikin, Othman (2009) Energy Absorption Of Triangular Rings Subject To Transverse Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Ab Ghani (2009) Effect Of Process Parameters On The Mechanical Properties Of RSSP / PP Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Awaliah, Abd Rahman (2015) Assessing A System Reliability: A Case Study In Arm Rear Axle Assembly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azarena , Ali (2014) Analysis for cast aluminium alloy titanium carbide. Project Report. UTeM. (Submitted)

Nur Azura, Ithnin (2015) Carbon Nanotube Growth From Solution Processed Cobalt Catalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farizan, Ayoob (2010) The Effect Of Sintering Temperature And Clay Addition Towards Glass Ceramic Produced From Recycle Glass By Using Pressing Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fashiha, Sapari (2015) Carbon Filled Glass Ceramic: From Waste To Wealth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fazlina , Ahmad (2009) Penyediaan Larutan Bahan Punar Bagi Aloi-Aloi Bukan Ferus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hasrin, Sabri (2014) Ergonomic design of computer numerical control lathe machine workstation. Project Report. UTeM. (Submitted)

Nur Hazirah, Ismail (2015) Shape Based Matching Gluing Defect Using Gaussian Filtering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah , Seth (2009) Infrared Cane For The Blind People. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Hizzuanna, Hazizan (2015) A Study On Machining Strategies For Pocketing Profiles Outward Helical, Offset On Part One Way And Offset On Part Zigzag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ilmi , Mohamad Roslan (2013) A Non-Destructive Test Crack Detection Method Using Vibration Acoustic On Aluminium Plate. Project Report. UTeM, Melaka. (Submitted)

Nur Liyana, Mohd Daud (2014) The influence of bentonite on glass waste filled spent bleaching earth (SBE) composite. Project Report. UTeM. (Submitted)

Nur Nabilah, Mamat (2015) Influencing Factors The Awareness & Practice Of Green Technology At Flextronics Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadia, Muhamad Arshad (2015) Synthesis Of TiO2 Nanotubes Via Anodic Oxidation In Carbonated Bath. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ramiza, Mohd Razali (2015) Automatic Ablution Machine Based On Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Rashid , Mat Nuri @ Md Din (2010) Numerical Simulation Of Aerodynamics Effect On An Automotive Side Mirror. Masters thesis, Universiti Teknologi Malaysia.

Nur Rashidah, Mohmad Daud (2014) Experimental investigation of stainless steel by using electrical discharge machine (EDM) /. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Rifhan , Rosli and Azizah , Shaaban and Jariah , Mohamad Juoi and Nur Farizan , Ayoob (2011) Characterisation and Properties of Sintered Recycled Glass utilising CIP Method. Key Engineering Materials, 471-47. pp. 245-250. ISSN 1013-9826

Nur Saaidah, Abu Bakar (2008) Study Of Cooling Water System (Closed Loop) At Hydroelectric Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syafini, Sa'ad (2015) Formation Of Iron Oxide Nanowires By Using Thermal Oxidation Of Iron. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syaheera, Ahmad (2013) Ergonomic Design Of Computer Numerical Control Milling Machine Using Quality Function Deployment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur-Ahmad, Mazlan (2009) Electromagnetic Power Plant Base On Perendev Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuradila , Harun (2013) Analysis Of Wave Amplitude Modulation Effect For Various Crack Lengths In Vibro Acoustic Inspection Method Simulation Approach. Project Report. UTeM, Melaka. (Submitted)

Nuraini , Abd Latif (2013) Ergonomics Design Of Baby Carrier. Project Report. UTeM, Melaka. (Submitted)

Nurazlina , Ibrahim (2010) Preliminary Study And Measurement Of Cutting Tool Coating Thickness By Using Alpha Thickness Gauging Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurbaitie Imana, Abdul Rashid (2011) Hu Invariant Moment For Static And Non Static Movement (HIMM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfaizey, Abdul Hamid (2014) Controlling The Spatial Deposition Of Electrospun Fibre. PhD thesis, Universiti Teknikal Malaysia Melaka.

Nurfaizey , Abdul Hamid and Muhd Ridzuan , Mansor and Mohd Zaid , Akop and Mohd Afzanizam, Mohd Rosli (2009) An experimental study of the influence of fiber architecture on the strength of polymer composite material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhafiza , Fadzil (2011) Development Of Portable Ceramic Gas Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhernida, Abdullah Sani (2011) Synthetic Hybrid Laminate Composite By Using Polyester Via VIP For Hardboard Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursyafika, Rohizat (2015) Influence Of Suspension Preparation Condition And Medium Microstructure And Phase Of Electrophoretic Deposited Poly (Vinylidene Fluoride) Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asyilah, Zakaria (2015) Application Of Plastic Bottle Waste On Lightweight Composite Structure Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ayunni, Abdul Latif (2010) Production And Characterization Of Enviro-Recycled Wood Plastic Composites (ER-WPC) For The Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azimah , Ahmad Arzaai (2008) Pemanas Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azwa, Abdul Rahman (2009) Damage Initiation And Propagation In Composite Materials Subjected To Tensile And Compression Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farah Adibah, Mohd (2015) Development Of Kenaf Polymer Composite Sandwich Structure. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nurul Farahizzati, Zakaria (2015) Design Of Shielded Metal Arc Welding (SMAW) Workstation For Safe Posture And Weld Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farhana Izzati, Mohamad Nazri (2015) Effect Of Yeast Content As Foaming Agent On The Mechanical Properties Of Titanium Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fariha , Othman (2010) Potential Application Of Tapioca Starch/Sugar Cane Fiber Cellulose Green Composite For Disposable Packaging Food Container. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fateen , Shukarnu (2007) Investigation Of Maximum Stress On Carbon Fiber Laminate Composite With Hole Using Finite Element Analysis (FEA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Fatiha , Johan (2015) Detection of partially occluded human using separate body parts classifiers. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nurul Fazliyani , Rusli (2009) Velocity Measurement Of Flowing Object Using Infrared Sensor. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Hafidzah, Rosli (2009) The Effect Of Probe Frequency In Ultrasonic Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Halwanie, Mat Zin (2015) Redesign The Toilet Seat By Using Ergonomic Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hana, Md Zuki (2015) Investigation Of Corrosion Rate Of SS316 Plate Inside An Alkaline Electrolyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hazimah , Jantan (2014) Graphene and carbon nanotube based electrochemical capacitor in aqueous electrolyte. Project Report. UTeM. (Submitted)

Nurul Hazimah , Jantan (2014) Graphene and carbon nanotube based electrochemical capasitor in aqueous electrolyte. Project Report. UTeM, Fakulti Kejuruteraan Pembuatan. (Submitted)

Nurul Jannah, Baharudin (2015) Analisis Terhadap Faktor-faktor Yang Memberi Kesan Kepada Kebolehtelapan Struktur Sel Semulajadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Mardhiah, Mohd Azizuddin (2010) An Investigation Of The Effect Of Retrogression And Reaging (RRA) Treatment On Stress Corrosion Cracking (SCC) Of Aluminum Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Syaffinaz, Muttakal (2013) The Acoustic Treatment & Speech Intelligibility Quality Analysis Of Masjid UTeM Using Advance Tool Simulation And Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Zawani, Hambali (2008) Design, Development And Analysis Of Body Profile For Ballistic Armour Mould Using Reverse Engineering Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhazwani, Jamalludin (2010) Fruit Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhilmi, Zaiedah Nasir (2011) Development Of Lightweight Porous Concrete As Wall Insulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda, Mostafa (2013) The Effect Of Spent Bleach Earth (SBE) WT %On The Physical And Mechanical Properties Of Sintered Glass Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Oh, Kok Ken (2016) Aerial Monitoring On Mango Using Machine Vision Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Bapokutty (2014) Composite Hinge Spoiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Bapokutty (2006) Fatigue behaviour of a polymer concrete with and without added polyester fibre. Masters thesis, Universiti Teknologi MARA.

Omar, M.Khaled and Abdullah, Rohana and Abd. Rahman, Md. Nizam (2012) Process and Labour Utilization in The Electronic Industry: A Simulation Approach. In: 6th IEEE International Conference on Management of Innovation and Technology, 10-14 Jun 2012, Sanur, Bali, Indonesia.

Ooi, Pui Yin (2016) Study The Properties Of Ti-6A1-4V After The Gas Nitriding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi , Zhuen Hong (2007) Environmental Ergonomics At Highway Toll Booth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, , Su Guan (2013) Effect of gold treatment on the mechanical properties of 316L stainless steel. Project Report. UTeM, Melaka. (Submitted)

Osman, Edynoor and Abd Rashid , Mohd Warikh and T., Moriga and K., Murai and Abd Manaf, Mohd Edeerozey (2017) Transparent Coating Oxide - Indium Zinc Oxide As Conductive Coating : A Review. Reviews On Advanced Materials Science, 49 (-). pp. 150-157. ISSN -

Osman, Khairuddin (2014) Integrating Servo-Pneumatic Actuator with Ball Beam System based on Intelligent Position Control. Jurnal Teknologi, 69 (3). pp. 73-79. ISSN E-ISSN2180-3722

Othman, Intan Sharhida (2016) Electrodeposition Of Nickel Coatings On Aluminium Alloy 7075 Through A Modified Single Zincating Process. PhD thesis, Universiti Teknikal Malaysia Melaka.

Othman, Mohd (2015) Hierarchical Image Classification Threshold On Mangrove. PhD thesis, Universiti Teknikal Malaysia Melaka..

Othman, Mohd Azlishah and Azman, Hazwani and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Abd Rahim, Yahaya and Che Pee @ Che Hanapi, Ahmad Naim and Motsidi, Mohamad Radzi and Othman, Mohd Fairuz Iskandar (2014) 10 Ghz Microstrip Spanar Antennas : An Experimental Analysis. Journal of Physics Conference Series, 495 (-). pp. 1-8. ISSN 1757-8981

Othman, Muhammad Syah Akhimullah (2015) Analysis On Effect Of Kenaf Fiber Towards Impact Characteristic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Peshwinder Singh, Harjit Singh (2013) Acoustic Performance Of Sandwich Skin For Acoustic Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phongsakorn, Prak Tom (2010) The Effect Of Alkalization Treatment On The Mechanical Properties And Water Absorption Of Kenaf/Polyester Biocomposites. Masters thesis, UTeM.

Phung, Lee Mun (2013) Combine Infrared Lock-In Thermography And Curve Tracer Into An Integrated System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pichaiyan Subramaniam Kavitha , . (2010) Image Clustering : Comparison Of Two Color Segmentation Techniques. Masters thesis, UTeM.

Poh, Kiat Ng and Meng, Chauw Bee and Saptari, Adi and Mohamad, Nor Akramin (2014) A Review Of Different Pinch Technique. Theoretical Issues in Ergonomics Science, 15 (5). pp. 517-533. ISSN -

Poh, Kiat Ng and Qiao, Hui Boon and Ka, Xuan Chai and Shiong, Lung Leh and Meng, Chauw Bee and Saptari, Adi (2014) The Roles Of Shape And Size In The Pinch Effort Of Screw Knobs. Applied Mechanics and Materials, 465-46 (-). pp. 1202-1206. ISSN 1660-9336

Poh, Kiat Ng and Saptari, Adi (2015) Effects Of Pinch Technique, Torque Direction And Sensation On The Pinch Force In Loaded And Unloaded Conditions. Modern Applied Science, 9 (13). pp. 163-175. ISSN 1913-1844

Poh, Kiat Ng and Saptari, Adi and Jian, Ai Yeow (2014) Synthesising The Roles Of Torque And Pinch Force : A Framework. Theoretical Issues In Ergonomics Science, 15 (2). pp. 193-204. ISSN -

Poh, Kiat Ng and Saptari, Adi and Kian, Siong Jee and Tan, Yue Hang (2015) The Effects Of Size On Pinch Force In Loaded And Unloaded Conditions. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 58-67. ISSN 1991-8178

Poh, Kiat Ng and Saptari, Adi and Kian, Siong Jee and Tan, Yue Hang (2015) Torque Direction And Its Influence On Pinch Force In Loaded And Unloaded Conditions. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 73-79. ISSN 1991-8178

Poh, Kiat Ng and Saptari, Adi and Qiao, Hui Boon and Meng, Chauw Bee and Ka, Xuan Chai and Shiong, Lung Leh (2014) Pinch Effort Variations With Torque, Shape And Size, Sensation And Technique. Journal of Applied Sciences, 14 (5). pp. 401-414. ISSN 1812-5654

Prasath, Rajandhiran (2008) Investigation On Mechanical Properties Of Stainless Steel 304-Stannum Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pratama, S. F. and Muda, A. K. and Yun-Huoy, C. (2010) Feature Selection Methods for Writer Identification: A Comparative Study. In: IEEE International Conference on Computer and Computational Intelligence (ICCCI 2010), 25 - 26 December, 2010, Nanning, China.

Puteri Suriyani, Megat Wazir and Ahmad Fauzan, Kadmin and Hamzah Asyrani, Sulaiman and Mohd Saad, Hamid and Shamsul Fakhar, Abd Gani and Norhidayah, Mohamad Yatim (2011) Blood Cell Recognition System Using Recursive Least Square Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Putra, Azma and Ab Latif, Nurain Shyafina and David, Thompson and Muhammad, Noryani (2014) Modeling Sound Radiation From A Baffled Vibrating Plate For Different Boundary Conditions Using An Elementary Source Technique. Inter-Noise And Noise-Con Congress And Conference Proceedings, 249 (-). pp. 5812-5819. ISSN -

Putra, Azma and Abd Khair, Fazlin and Mohd Nor, Mohd Jailani (2015) Utilizing Hollow-Structured Bamboo As Natural Sound Absorber. Archives Of Acoustics, 40 (4). pp. 601-608. ISSN 0137-5075

Q

Qasem Ahmed, Sharif Ahmed and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah (2016) Microstrip Antenna Design With Circular Polarization Property For RF Energy Harvesting Application. International Journal of Applied Engineering Research, 11 (6). 4398 - 4401. ISSN 0973-4562

Qurratu' Aini, Yaacob (2015) The Effect Of Dispersion On The Mechanical Properties Of PLA-Based Polymer Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

R

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Tjahjowidodo, Tegoeh and Chey , Long Sheng and Chiew , Tsung Heng (2012) Theoretical Analysis of Friction Compensation Using Sliding Mode Control. Applied Mechanics and Materials, 229-231. 2385-2388. ISSN 16609336

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Abdullah, Lokman and Chiew, Tsung Heng (2014) Study on effect of sigmoid like curves in pre-sliding regime on ball screw driven positioning stage. In: Intl. Conf. on Advances In Civil, Structural And Mechanical Engineering- CSM 2014, 1-2 june 2014, University of Westminster, London.

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Abdullah, Lokman and Chiew, Tsung Heng and Mat Ali, Mahasan (2012) Review on Friction Compensation Approach For Machine Tools Application. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

Rabiatul Adibah , Abdul Rahim (2010) Design And Analysis Of Autoclave Mould For Carbon Reinforced Spoiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafeek Ahmad, Mohamed Asyraf (2008) Fabrication And Characterization Of Rubber Seed Shell Powder (RSSP) Filled Polypropylene (PP) Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah, Mohamad Noor (2008) Imaging Concentration Profile Of Flowing Particles Using Combination Of Infra Red Emitter And Photoelectric Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafidah , Hasan and Omar, Bapokutty and Fatimah Al-Zahrah, Mohd Sa'at (2008) Fatigue And Fracture Investigation On Surface Hardened Metals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rafiha , Ranom and Alias , Khamis and Zulkifli , Ibrahim and Asri , Din and Mohd Norhisham , Che Soh and Mohd Rizuan , Baharon (2011) Numerical Analysis-Based : Visualization Technique Of Heat Distribution And Dissipation In Current-Carrying Conductors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raguvaran, V. Segaran (2014) Design of a noise insulator for ripple mill at kernel recovery plant in palm oil mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahmah Iznillah , Abd.Malik (2010) 10 Way Infra Red Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raihana, Ramle (2009) Corrosion Rate Of Aluminum Alloy By Anodizing With Emphasis On Body Panel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985

Raja Afiq Al-Hakimi, Raja Tajuddin (2015) An Assessement Of Cylinder Deactivation Implementation Using A Race Sytyle Exhaust Manifold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Izhar Azuan, Raja Izam (2008) Kajian Kesan Suhu Terhadap Keluli Lembut Pada Daya Serenjang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Manisa, Raja Mamat (2009) Effects Of Maleated Polyphropylene (MAPP) On The Mechanical Properties Of Rubber Seed Shell Powder (RSSP)/Polypropylene (PP) Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Seman, Raja Noor Amalina (2016) Direct Growth Of Vertically Aligned Carbon Nanotube (VACNT) On Different Conducting Substrates For Electrochemical Capacitor (EC). Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramaneshwaran, Baskaran (2011) Development Of Fibre Optic Roughness Measuring System Using Time Of Flight Method (TOF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramdan, Nur Sufiah Akmala (2016) Computer Vision System For Monitoring Body Discomfort In Manufacturing Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramiza , Mohd Yunus (2008) Development Of Algorithm Of Classification Between Human And Non-Human. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ramlan, Roszaidi and Brennan, Michael and Mace, Brian and Stephen , Burrow (2012) On the performance of a dual-mode non-linear vibration energy harvesting device. Journal of Intelligent Material Systems, 23 (13). pp. 1423-1432. ISSN 1244-3017

Ramli, Mohd Irman (2012) Teaching Plan for BTMU1223 Engineering Design. [Teaching Resource]

Ramli, Bizora (2016) Topology Optimization Of Mold Base Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rashidah, Ismail (2008) Quenching-Tempering Effects On Hardness And Compression Strength Of Carburized Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasidin, Senawi (2008) Low Velocity Impact Behaviour Of Advanced Composite Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razak, Muhammad Shahmi (2016) Flexural Test On Virgin And Recycle HDPE Specimen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raziman , Ramli (2009) Study On The Laminar Pulsed Flow In Microchannel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Reza Assad, Zakaria (2009) Kajian Perubahan Bentuk Plastik Terhadap Daya Lenturan Melalui Kaedah Ujikaji. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridzuan, Jaham (2012) Merekabentuk Dan Fabrikasi Radas Eksperimen Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Robert Milkey, Kolandaisamy (2014) Laser Machining Of Glass Fibre Reinforced Plastics (GFRP). Masters thesis, Universiti Teknikal Malaysia Melaka.

Ros Azura, Mohsin (2007) Fatigue Study On Metal Using Tensile Load. Project Report. UTeM, Melaka. (Submitted)

Rosdi, Rafi'uddin (2016) Development Walking Stick With Heart Attack Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosdiadi, Ramli (2005) Reverse Engineering Of A Container Product Of A Plastic Injection Molding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roshazira, Ahmad (2009) Attendance Management System Using Fingerprint Scanner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rosliza, Ismail (2009) Feasibility Study On Mechanical Properties Of Various Vacuum Casting Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozeana, Abd Rahman (2010) Vision System Based Height Measuring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozita , Salehudin (2007) Pengukuran Aliran Bendalir Menggunakan Venturi Meter Dengan Kaedah Eksperimen Dan Simulasi CFX. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rudy , Majid (2013) The Effect Of Applied Stress On Heat Treated Aluminum Alloys 7075 In DC Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rustam, Ramli (2008) Vibration - Free Positioning Of Flexible Systems Using Impulse Shaping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

Sa'aya, Nurul Afiqah (2016) The Residue Of Oil Palm (Empty Fruit Bunch) As Fiber Reinforcement With The Comparison Between Epoxy And Polyester As Matrix In Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saafuan Ali, Tukiran (2015) Design And Simulation Of Guided Wave Transmitter For Inspection On Concrete Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sabikan, S. and Nawawi, S.W. (2016) Open-Source Project (OSPs) Platform for Outdoor Quadcopter. Journal of Advanced Research Design, 24 (1). pp. 13-27. ISSN 2289-7984

Sahbudin Shaari (2013) Asymmetrical Parallel Cascaded Microring Resonator (APCMRR) Filter on Silicon-On-Insulator (SOI) for WDM Network. UKM3.2.29/108/2/742.

Sahbudin, Saari and Hanim, Abdul Razak and Mardiana, Bidin and Haroon, Hazura and Menon, P.S (2010) Modeling And Analysis Of Lateral Doping Region Translation Variation On Optical Modulator Performance. In: THE 4TH ASIAN PHYSICS SYMPOSIUM—AN INTERNATIONAL SYMPOSIUM, 12-13 Oktober, Bandung, Indonesia.

Saidah, Mohamad Aminallah (2013) Characterization Of Hydroxyapatite Coating Deposited On Glass, Stainless Steel And Titanium Alloy Substrate Via Sol-Gel Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidah , Khalid (2007) Analysis Of Working Posture Of Operator In Mixing Department Of An SMI In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saipullah, Khairul Muzzammil (2012) Real-Time Video Processing Using Native Programming on Android Platform. In: 2012 IEEE 8th International Colloquium on Signal Processing and its Applications, 23-25 March 2012, Melaka.

Saipullah, Khairul Muzzammil (2013) Comparison of Feature Extractors for Real-Time Object Detection on Android Smartphone. Journal of Theoretical and Applied Information Technology . pp. 135-142. ISSN 1992-8645

Saipullah, Khairul Muzzammil (2013) Feature Extraction Method for Classification of Approved Halal Logo in Malaysia using Fractionalized Principle Magnitude. Engineering Management Reviews (EMR), 2 (2). 36 -44 . ISSN 2326-5884

Saipullah, Khairul Muzzammil (2012) ANALYSIS OF REAL-TIME OBJECT DETECTION METHODS FOR ANDROID SMARTPHONE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia . (In Press)

Saipullah, Khairul Muzzammil (2011) Continuous Local Histogram Descriptor For Diagnosis of Bronchiolitis Obliterans. In: IEEE Hybrid Intelligence System 2011 (HIS2011), 5-8 December 2011, Ayer keroh, Melaka.

Saipullah, Khairul Muzzammil (2011) The Pruning of Combined Neighborhood Differences Texture Descriptor for Multispectral Image Segmentation. International Journal of Computer Technology and Electronics Engineering, 1 (3). pp. 1-6. ISSN 2249-6343

Saipullah, Khairul Muzzammil (2011) Spectral dimensionality reduction based on intergrated bispectrum phase for hyperspectral image analysis. In: Image and Signal Processing for Remote Sensing XVII, Monday 19 September 2011, Prague, Czech Republic.

Saipullah, Khairul Muzzammil (2012) Enhancing Spectral Classification Using Adaboost. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) 2012, 11 - 13 Dec 2012, Melaka.

Saipullah, Khairul Muzzammil (2012) Feature Extractor for the Classification of Approved Halal Logo in Malaysia. In: IEEE International Conference on Control System, Computing and Engineering, 23-25 November 2012, Penang .

Saipullah, Khairul Muzzammil (2012) JAKIM's Halal Logo Recognition System based on Android Smartphone. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

Saipullah, Khairul Muzzammil (2013) Measuring Power Consumption for Image Processing on Android Smartphone. American Journal of Applied Sciences, 9 (12). 2052 -2057 . ISSN 1546-9239

Saipullah, Khairul Muzzammil (2012) OpenCV Based Real-Time Video Processing Using Android Smartphone. International Journal of Computer Technology and Electronics Engineering, 1 (3). pp. 1-6. ISSN ISSN 2249-6343

Saipullah, Khairul Muzzammil (2011) A Robust Texture Feature Extraction using the Localized Angular Phase. Multimedia Tools and Applications. pp. 717-747. ISSN 1380-7501

Saipullah, Khairul Muzzammil (2012) Target Detection of Hyperspectral Images Based on Their Fourier Spectral Features. Society of Photo-Optical Instrumentation Engineers (SPIE), 51 (11). 111704-1 . ISSN 0091-3286

Salim, Mohd Azli (2016) Study Of Transmissibility Of Laminated Rubber-Metal Spring. PhD thesis, Universiti Teknikal Malaysia Melaka.

Salim, Mohd Azli and Putra, Azma and Abdullah, Mohd Azman (2014) Mathematical Formulation For Bending Wave In Non-Dispersive Finite Rod. International Review on Modelling & Simulations, 7 (3). pp. 523-530. ISSN 1974-9821

Salleh, Azahari and Abd Aziz, M. Z. A and Mohamad, Najmiah Radiah and Hashim, Nik Mohd Zarifie and Ja'afar, Abd Shukur (2013) Simulation of Wideband Power Amplifier Design for Software Defined Radio (SDR) Using Feedback and Balanced Topology. In: The 15th International Conference on Advanced Communications Technology-ICACT2013, 27-28 DISEMBER 2013, JEJU ISLAND KOREA.

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Safian, Mohd Azizul Hikmi and Yahaya, Saifudin Hafiz (2016) Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). p. 1. ISSN 1985-3157

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Salleh, Yahya (2005) Autonomous maintenance - an effective shop- floor tool to improve productivity. Journal of Technology Management and Entrepreneurship, 3 (2). pp. 1-18. ISSN 1675-8404 (Submitted)

Sally, Yeoh Sheue Ling (2008) Ergonomics Safety Approach In Welding Shop (A Case Study In UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sam, Weng Yik (2011) Implementation Of New Cross Diamond Search (NCDS) Algorithm For Motion Estimation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samad Fatimi, Farah Ezlin (2016) The Study Of Conversion Unit From Pixel To A Distance Measurement Acquired By Vision System Using Matlab Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Nur Alina (2016) Analysis On Human Factor For Manual Handling Worker And Design For Improvement Of Table Workstation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samuel, Tang Kah Hung (2010) Literature Study On Impact Energy Absorption (IEA) Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapani, Norshafiyanarina (2016) Bees Algorithm Inspired By Grenade Explosion Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarah Nadiah , Abdul Halim (2008) Effect Of Re-Solution Heat Treatment Time On The Impact Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sariansa, Santie (2008) Kajian Kelesuan Logam Berkarbon Rendah Melalui Penyusukkarbonan Dan Tanpa Penyusukkarbonan Menggunakan Beban Regangan Dan Mampatan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarifuddin, Mohd Amirullah (2015) Springback Effect On Various Thickness Of Mild Steel, Stainless Steel And Aluminium Sheet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarini , Ramli (2007) Assessment Of Working Posture In Manufacturing Industry Using Rula Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sark, Li Lian (2007) Digital Altimeter Based On PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazrinah , Mahamad Gaos (2006) Development Of Honeycomb Structure With Aluminium Skin For Light Weight Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sean , John Mathew (2013) Modeling And Optimization The Effects Of Process Variables On Mechanical Properties Of AL-6061 T6 Robotic CO2 Weldments. Project Report. UTeM, Melaka. (Submitted)

Selamat, Mohd Zulkefli and Ahmad, Mohd Sakir and Mohd Daud, Mohd Ahadlin and Ahmad, Narisa (2013) Effect of Carbon Nanotubes on Properties of Graphite/Carbon Black/Polypropylene Nanocomposites. Advanced Materials Research, 795 (2013). pp. 29-34. ISSN 10.4028/www.scientific.net/AMR.795.29

Shaaban, A. and Se, Sian-Meng and Dimin, M.F. and Juoi, Jariah M. and Husin, Mohd Haizal Mohd and Mitan, Nona Merry M. (2014) Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis. Journal of Analytical and Applied Pyrolysis , 107. 31- 39. ISSN 01652370

Shafawi, Shafei (2008) Merekabentuk Peralatan Momen Lenturan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafei, Siti Azian (2016) Fabrication Of Green Polymeric Tiles From Polypropylene And Tapioca Starch Compound. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahida, Remle (2015) A Study Of Surface Roughness Of Aisi 1045 Carbon Steel By Using Wet CnC Turning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahirul Aini , Kamarul Khisham (2009) CMM’s Styli Length Effect On Error Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaifatul Shima, Shaari (2010) Analysis On Bicycle Crank Arm Using Tensile Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shair, Ezreen Farina and Khor, Shen Young and Abdullah, Abdul Rahim and Jaafar, Hazriq Izzuan and Mohd Ali, Nursabillilah and Zainal Abidin, Amar Faiz (2014) A Brief Review of Cuckoo Search Algorithm (CSA) Research Progression from 2010 to 2013. International Review of Automatic Control (I.RE.A.CO.), 7 (5). pp. 428-435. ISSN 1974-6059

Shamsul Fakhar, Abd Gani (2013) Development Of Stereo Vision Sensor And Distance Estimation For Computer Vision Application (DE-CV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharifah Zafirah, Syed Zainal Abidin (2013) Transparent Conductive Carbon Nanotubes / Binder Hybrid Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharifah Zafirah, Syed Zainal Abidin (2014) Transparent Conductive Carbon Nanotubes/Binder Hybrid Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shazreena , Samat (2013) Effect of heat treatment on the microstructure and mechanical properties of low carbon steel. Project Report. UTeM, Melaka. (Submitted)

Sheda Akmaniza, Ibris (2008) Kajian Terhadap Kesan Perbezaan Resin Ke Atas Komposit Laminat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shueb, Mohammed Iqbal and Abd Manaf, Mohd Edeerozey and Ratnam, Chantara Thevy and Mohamad, Noraiham (2017) Influence Of Sonication Assisted Dispersion Method On The Mechanical And Electrical Properties Of Nylon 66/Nano-Copper Nanocomposite. Jurnal Teknologi, 79 (5-2). pp. 77-81. ISSN 0127-9696

Shuharzi , Md Salleh (2007) Merekabentuk Dan Membentuk JIGS Untuk Ujian Ricih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351

Sihombing, Haeryip and M.Y., Yuhazri and A.Razak, Jeefferie and P., Perumal and Akbar, Habibulah (2012) Real of Simply Assembly Line Balancing using Fact-Model. International Journal of Computer and Electrical Engineering, 4 (6). pp. 870-874. ISSN 1793-8163

Sihombing, Haeryip and Rassiah, Kannan and Ashaari, Zaini and M.Y., Yuhazri (2012) An Analysis and Development of Recycled Materials for Wood Plastic Composite Product. Elixir Mechanical Engineering, 51. pp. 10834-10840. ISSN 2229-712X

Sihombing, Haeryip and Rassiah, Kannan and Chidambaram, Parahsakthi (2011) Line Balancing Analysis of Tuner Product Manufacturing. International Journal of Engineering Science and Technology, 3 (6). pp. 5206-5214. ISSN 0975-5462

Sihombing, Haeryip and Yuhazri, Yaakob and YAHAYA, SAIFUDIN HAFIZ and Sivarao, Subramonian and Hazwan, M.A (2012) An Analysis of Quality Criteria to Determine the Improvement Priority Attributes. Universiti Teknikal Malaysia Melaka, pp. 489-493. ISBN 978-967-0257-16-7

Sirinjeev Rao, Raman (2013) Design Of Casting Mold For Natural Fiber – Metal Matrix Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Afizah , Mohd Ali Hanafiah (2006) The Direct Reading Of Ultrasound Distance Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aminah, Mohd Subari (2010) Study On Shock Absorbing Properties Of Aluminium Circular Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Dhamirah 'Izzati, Damni (2011) The Face Recognition System By Using The Radial Basis Function Neural Network (RBFNN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Eaisyah , Kamaruzaman (2009) New Packaging Material By Using Mechanical Retting Kenaf As A Natural Filler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Faizah , Mad Asasaari (2010) Effect Of Chromium Carbide (Cr23C6) Formation On Microstructure And Corrosion Passivity Behavior Of AISI 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Fatimah, Baba (2012) Face Recognition Development Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar, Raman (2012) Fish Camkit Improvement for Fisheries Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar , Sheikh Md. Fadzullah (2005) Bioresorbable And Bioactive Polymer Matrix Composites Containing Ceramic Nanoparticles For Tissue Engineering. Masters thesis, Imperial College london.

Siti Hajar , Sheikh Md Fadzullah (2014) The oblique impact response of composites and sandwich structures. PhD thesis, Universiti Teknikal Malaysia Melaka.

Siti Hanafiah , Juddin (2008) Infra Red (IR) Based Tomography System : A Comparison Between Orthogonal And Fan Beam Projection. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Haryani, Harun (2009) Buckling Behavior Of Laminates Composite Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hasmah, Mohd Salleh (2014) Development Of Microwave Imaging Technique Using Synthetic Aperture Radar For Early Cancer Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hawa, Zainal (2014) Investigation Of Lightning Distribution Using LIS Data From TRMM Satellite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nooraishah , Elies (2013) Preliminary Investigation Of Plastics Joining Process. Project Report. UTeM, Melaka. (Submitted)

Siti Noormiza , Mat Isa and Zulkifilie, Ibrahim and Jurifa , Mat Lazi (2011) Comparative analysis of simplified and standard fuzzy logic controller in vector controller PMSM. In: IEEE Symposium On Industrial Electronics and Applications, 25-28 September 2011, Langkawi, Kedah. (Submitted)

Siti Nur Azreen, Ayub (2015) The Effect Of Fibre Type, Size, And Fibre Architecture On The Mechanical Properties Of Bio Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurathirah, Mohd Zulkeflle (2015) A Study On Hand Press Grip Force For Push Activity In Lay Up Process At Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rafidah , Mamat (2007) Reverse Engineering Of Pharmaceutical Bottlepack Cap By Plastic Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rahmah , Mohd Hassan (2009) Analysis Of Medical Imaging Using Digital Image Processing. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Rohani, Shafie (2009) Fabrication Of Kenaf Fiber Reinforced Polyester Composite By Using Vacuum Infusion Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sakinah Munirah, Ishak (2013) A Study Of Sunflower Oil Performance As A Gear Lubricant. Project Report. UTeM, Melaka. (Submitted)

Siti Salwany, Abu Hasan (2010) Effect Of Risk Husk Reinforcement To The Properties Of Polyester Bio Composite For Roofing Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Umi Hani, Mohamed (2009) Design And Analysis Of Long Cylindrical Workpiece Fixture Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Wannorhassliza, Wan Hassan (2013) Characteristics Of Hydroxyapatite Sol-Gel Coating Of Stainless Steel In Hank’s Solution And Sodium Chloride Medium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zulaiha, Mohd Azam (2015) The Use Of Snakehead Fish Behavior In Round Nose Bullet Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivakumar, Dhar Malingam and Mohd Radzai , Said and Ahmad , Rivai and Tan , Chee Fai (2007) Buckling Behaviour Of Shallow Vee Section Beams. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivakumar, Dhar Malingam (2012) APPLICATION OF TOTAL PRODUCTIVE MAINTENANCE TO REDUCE NON-STICK ON PAD PROBLEM IN IC PACKAGING. International Journal of Engineering and Science, 3 (1). pp. 14-32. ISSN 2086-3799

Sivakumar, Dhar Malingam and Ahmad, Rivai and Sivarao, Subramonian and Mohd. Zulkefli, Selamat and Mohd Nur Azmi, Nordin (2012) Stamp Forming Performance Of Palm Fiber Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian and Mohd Shukor, Salleh and T. Joseph, Sahaya Anand and Syamimi , Samsudin and Ian Peter, Hasoloan Haery (2011) A Compilation Of Various Research In Manufacturing Engineering Part 1. Penerbit Universiti Teknikal Malaysia Melaka, pp. 1-178.

Sivarao, Subramonian (2009) Neural Network Multi Layer Perceptron Modeling For Surface Quality Prediction in Laser Machining. In: Application of Machine Learning. In-Tech Publication-Austria, Austria, pp. 51-61. ISBN 978-953-307-035-3

Sivarao, Subramonian and Taufik, , (2007) Coating characterization of TiN & TiAIN on burr formation in drilling pragmatic investigation. In: International Conference on Engineering and JCT (ICE! 2007),, 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Sivarao, Subramonian and Taufik, . (2007) Comparative quality investigation of rolled and flat carbon steel plates in drilling. In: International Conference on Engineering and ICT (ICEI 2007), 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Soh, Tiak Chuan (2016) Improvement On Tear Resistance Of Rubber Moulded Mat By Varying Filler And Accelerator Contents. PhD thesis, Universiti Teknikal Malaysia Melaka.

Soo, Yew Guan (2003) Rain Effect On Outdoor Vision System. Masters thesis, Universiti Teknologi Malaysia.

Soon, Wei Jun (2016) Object Recognition Using Bows Model. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Sri Vanitha Mathy, Sedu Badi (2011) Omni-Directional Hexapod Vehicle For Uneven Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Stephen , Rachel Karen (2009) Analisis Kegagalan Pada Struktur Kerusi Kegunaan Pelajar Di Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramaniam, Shathis Kumar (2016) Intelligent Image Capturing Alarm System To Protect Your Locker Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramonian, Sivarao and Ali, Aidy and Amran, Mohammad and Dhar malingam, Sivakumar and Salleh, Mohd Shukor (2016) Effect Of Fiber Loading On The Mechanical Properties Of Bagasse Fiber–Reinforced Polypropylene Composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Subramonian, Sivarao and Ali, Aidy and Amran, Mohammad and Dhar malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect Of Fiber Loading On The Mechanical Properties Of Bagasse Fiber–Reinforced Polypropylene Composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Subramonian, Sivarao and Ali, Aidy and Md Ali, Mohd Amran and Dhar malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance Evaluation Of Reworked Weld Joints. International Journal Of Engineering And Technologies, 9 (-). pp. 5-12. ISSN 2297-623X

Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -

Sufian, Mohamed Nor (2007) Development Of Coconut Shell Powder Reinforced HDPE Composites. Project Report. UTeM, Melaka. (Submitted)

Sufian Sauri , Ahmad (2007) Sistem Penggera Pengesan Inframerah Pasif. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhada, Mohammed Sapardi (2009) Performance Of Resilient Backpropagation Algorithm In Face Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaimi, Misha (2013) The CFD simulation of tray dryer design for kenaf core drying. Applied Mechanics and Materials. pp. 717-722. ISSN 1660-9336

Suhaimi, Misha (2014) Comparison Between 2D and 3D Simulations of a Tray Dryer System Using CFD Software. World Applied Sciences Journal, 29 (10). pp. 1301-1309. ISSN 1818-4952

Suhaimi, Misha (2013) Comparison of CFD Simulation on Tray Dryer System Between Porous and Solid Product. In: Latest Trends in Renewable Energy & Environmental Informatics. WSEAS Press, pp. 59-64. ISBN 978-1-61804-175-3

Suhaimi, Misha (2013) Review on the Application of a Tray Dryer System for Agricultural Products. World Applied Sciences Journal, 22 (3). pp. 424-433. ISSN 1818-4952

Suhaimi, Misha and Mohd Afzanizam, Mohd Rosli and Sohif , Mat and Mohd Hafidz, Ruslan and Elias, Salleh and Kamaruzzaman, Sopian (2014) Performance Test of Solar Assisted Solid Desiccant Dryer. In: Computer Applications in Environmental Sciences and Renewable Energy. WSEAS Press, pp. 174-180. ISBN 9789604743704

Suhaimi, Misha (2012) Review of solid/liquid desiccant in the drying applications and its regeneration methods. RENEWABLE & SUSTAINABLE ENERGY, 16. pp. 4686-4707. ISSN 1364-0321

Suhaimi, Misha and Sohif, Mat and Mohd Afzanizam, Mohd Rosli and Mohd Hafidz, Ruslan and Kamaruzzaman, Sopian and Elias, Salleh (2015) Simulation of air flow distribution in a tray dryer by CFD. In: Recent Advances in Renewable Energy Sources. WSEAS Press, pp. 29-34. ISBN 978-1-61804-303-0

Suhaimi, Misha and Sohif, Mat and Mohd Hafidz , Ruslan and Elias, Salleh and Kamaruzzaman, Sopian (2015) Performance of a solar assisted solid desiccant dryer for kenaf core fiber drying under low solar radiation. Solar Energy, 112. pp. 194-204. ISSN 0038-092X

Suhaimi , Misha (2013) The Prediction of Drying Uniformity in Tray Dryer System using CFD Simulation. International Journal of Machine Learning and Computing, 3 (5). pp. 419-423. ISSN 2010-3700

Sukrulnizam , Ismail (2010) PIC Based Fiber Optic Pressure Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sumaiyah, Abdul Latiff (2013) Applying A Crisp And Fuzzy Analytic Hierarchy Process Method For Spatial Multi-Criteria Decision Analysis [Case Study : Spectacles Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suriatie , Ghazali (2009) The Study Of Square Plate Under Compression Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suzie Haslinda, Musa (2011) Low Back Pain Analysis In Aluminium Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafeeza , Ahmad Radzi (2014) Convolutional neural networks for face recognition and finger-vein biometric identification. PhD thesis, UTeM.

Syahriful, Rizky Sultansyah (2016) Study On Corrosion Rate Of The Zinc Anode From Outboard Boat Engine Around Straits Of Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syaidatul Huzaliza , Shamsudin (2015) Walking stick embedded with wireless earphone. Project Report. UTeM. (Submitted)

Syamimi, Shamsuddin (2006) Self Aligning Co-Ordinate Measurement. Masters thesis, Loughborough University.

Syamimi Wahidah, Ahmad Nizar (2015) Fiber Optic Sensor (FOS) For Ethanol Detection And Optimization Performance Using Analysis Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syamsul Baharin , Husain (2008) Infrared Distance/Height Measurement. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Syarifah Mahani , Mohd Nazri (2008) A Study On 3D Modeling Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarifah Noorashiqah, Syed Mohd Zainol (2009) Study The Mechanical Properties And Morphology Of Glass-Carbon Fiber Reinforcement/Polyethylene (PE) Hybrid Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syawal, Symsul (2015) Kesan Gentian Kaca Ke Atas Polipropilena (PP) Sebagai Bahan Geseran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazana Itqan, Khalid (2015) Developing A Face Recognition System Using Convolutional Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwan , Zainuddin (2013) Fluid flow characteristic in curved tube heat exchanger by numerical method. Project Report. UTem, Melaka. (Submitted)

Syazwani , Baharom (2014) Electrochemical behavior of electroless ternary nickel (Ni-W-P) alloy deposit on iron substrate in 3.5WT % NaCI solution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Amir Redha, Syed Mohmad (2011) Laser Range Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Hamzah, Syed Othman (2008) Quasi-Static Indentation Force On Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Hashim, Syed Moksin (2008) Study On The Strength And Mechanical Properties Of Bio-Composite Of Maize Stamp Fiber Sandwich Matrix With Resin/Polymer For Shield Ballistic Armor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Jamil Rusydi, Syed Baharom (2007) Mechanical Characterization Of Polymer Matrix Composite (Low Density Polyethylene With Rubber). Project Report. UTeM, Melaka. (Submitted)

Syed Muhammad Hazwan, Sayed Ali (2013) Mechanical Behavior & Water Absorption Of Metal Matrix Composite (Tin+Rice Husk) Fabricated Via Permanent Mould Casting (Experiment With 5% WT And 15% WT Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Najib, Syed Salim (2003) Concentration Profiles and Velocity Measurement Using Ultrasonic Tomography. Masters thesis, Universiti Teknologi Malaysia.

Syed Salim , Syed Najib and Rahmat, Mohd Fua’ad and Mohd Faudzi, Ahmad ’Athif and Ismail, Zool H. and Sunar, Noorhazirah (2014) Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. pp. 1-12. ISSN 1024-123X

Syuhadah, Zainal Abidin (2007) Effects Of Carburizing On Mechanical Properties Of Low Alloy Steel. Project Report. UTeM, Melaka. (Submitted)

syed mohamed, muhammad syafiq and Ze Mei, Chiang and Hui Hui, Yee (2013) Ergonomics Evaluation on Non Keyboard Input Devices. Universal Journal of Management and Social Sciences, 3 (9). pp. 65-69. ISSN 2226-6240

T

T. Joseph, Sahaya Anand and Sivarao, Subramonian (2011) Improve The Mechanical Properties Of Intermetallic Aluminides For Automotive Body Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tainsing, Josua (2015) Vibration Control Of A Coupled Cylinder Under Rotational Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Talib, Elyas and Lau, Kok Tee and Zainal Abidin, Muhammad Zaimi and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Raja Seman, Raja Noor Amalina and Zulkapli, Nor Najihah and Mohd Abid, Mohd Asyadi 'Azam (2015) Electrochemical Performance Of Multi Walled Carbon Nanotube And Graphene Composite Films Using Electrophoretic Deposition Technique. Applied Mechanics And Materials, 761. pp. 468-472. ISSN 1662-7482

Tan, CheeFai (2013) The Self-Reported Seat Discomfort Survey on Economy Class Aircraft Passenger in the Netherlands. Australian Journal of Basic and Applied Sciences. pp. 563-570. ISSN 1991-8178

Tan, CheeFai and Ranjit, S.S.S. and Ong, S.T, and Ngeow, Y.W. (2011) The Sustainable Technological Innovation among SMEs in South East Asia Countries: A Case Study. In: 29th Conference of the ASEAN Federation of Engineering Organization (CAFEO), 27-30 November 2011, Brunei Darussalam.

Tan, CheeFai and Tean, Z.Y. and Said, M.R. and Khalil, S.N. and Sudin, M.N. and Karjanto, Juffrizal and Yusof, N.M. and Sivarao, Subramonian (2013) Conceptual design of cantilever support for long haul bus passenger seat. Australian Journal of Basic and Applied Sciences. pp. 383-387. ISSN 1991-8178

Tan, Kevin Chan Khoon (2008) Fabrication Of Polymer Composites For Use As Jigs And Racks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kien Guan (2012) A Thermal Heated Lunch Box. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Shan Shan (2013) Hard Disk Drive Serial Number Recording And Inventory System Using Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Teng Teng (2012) Mechanical And Physical Properties Of Sandwich Structures Made From Chopped Strand Mat Coconut Fiber Filled With Polyurethane Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, CheeFai and Ranjit, S.S.S. and Karjanto, Juffrizal and Yusof, N.M. and Khalil, S.N. and Dhar Malingam, Sivakumar (2013) Conceptual Design for Multi Terrain Mobile Robot. Australian Journal of Basic and Applied Sciences. pp. 300-308. ISSN 1991-8178

Tan, Xin Mei (2011) Analysis On Optical Waveguide (Free Space Optics) Via Beam Propagation Method (BPM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Soon Heng (2016) Flow Process Measurement And Control Using PID Control Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, . and Shajahan, Maidin (2008) Design Improvement Of An Automotive Part Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, . and Tahul Ariffin, Abdullah (2010) Design and Analysis of Production Tooling for Metal Matrix Composite by Investment Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, Afirah and Syed Ahmad, Sharifah Sakinah and Ahmad, Asmala (2016) Classification Of Landsat 8 Satellite Data Using NDVI Thresholds. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 37-40. ISSN 2180-1843

Tay, Shin Yoon (2010) Effect Of Different Heat Sensitization Temperature On Type 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tay, Shin Yoon (2010) Effect of Different Heat Sensitization Temperature On Type 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chin Wee (2012) Experimental and analytical investigation torsional behavior of sigma profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Kok Chen (2016) Structural Characterization Of Tungsten Sulphoselenide (Wsse) Thin Films For Semiconductor Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Wei Sen (2016) Robotic Arm Controller Design For Capturing The Sequential Images Surrounding The Object. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Zhen Wei (2016) Dry Sliding Wear And Friction Behavior Of Silicon Carbide And Multi Wall Carbon Nanotubes Reinforced Magnesium Matrix Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teh, Chee Khoon (2015) The Effect Of Carbon Nanotube On The Properties Of Graphite, Carbon Black And Epoxy Composite For The Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teng, Kuan Hui (2013) Experimental study of the behaviour of baphasic materials. Project Report. UTeM, Melaka. (Submitted)

Tengku Asmazatul Adawiah, Tengku Abdul Kadir (2015) Effect Of Binder And Fillers Ratio On The Properties Of Graphite/Carbon Black/Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Nurul Izatulshima, T. Mohd Hashim (2009) Penyediaan Larutan Bahan Punar Untuk Aloi-Aloi Ferus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Chee Huat (2016) Development Of Double Stage Filter (DSF) On Stereo Matching Algorithm For 3D Computer Vision Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tew, Huei Theng (2016) Preparation And Charaterization Of Kenaf Fiber Reinforced MWCNTS-EPOXY Multi-Scale Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tham, Kar Mun (2013) Exploring The Failure Mode And Mechanical Properties Of Spot Welded Dissimilar Joints For Austentic Stainless And Galvanized Steels. Project Report. UTeM, Melaka. (Submitted)

Thavan, Lingeshpari Vasu (2016) Industrial Case Study On The Effect Of Particle Size On Warpage Of Alumina Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tie, Sing Ann (2011) Stress-strain And Failure Analysis Of Steel Pipe With Stress Concentration Factors (SCFs) Under Static 3 And 4 Point Bend Conditions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiew, Pooh Bum (2009) Application Of TRIZ Methodology In Solving Arc Welding Problems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Timothy , Guri (2010) The Effect Of Temperature Rise On The Electrical Characteristic Of Solid Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tio, Kok Wei (2015) Effect Of Formation Temperature On The Properties Of Graphite/Stannum/Polypropylene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toh, Kian Siong (2011) Design And Analysis Of Hole Pattern For Vacuum Manifold Using CAE Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Too, Pei Pei (2015) Application Of Bagasse Waste On Lightweight Composite Structure Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Amru Hasan, Tuan Yusof (2008) Kajian Kelakuan Lesu Dalam Bahan Berlogam Dengan Menggunakan Teknik NDT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tun Noor Syuhada, Abdul Rahman (2006) Automated Modification And Storage System In Computer Aided Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

Ummi Nazirah, Jamil Khair (2013) Real-Time Wireless Face Recognition System (RT-WiFARES). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ummi Rabaah, Hashim (2015) Timber Defect Detection Based On Systematic Feature Analysis And One Class Classifier. PhD thesis, Universiti Teknikal Malaysia Melaka.

V

Veryson, Kohiya (2016) Development A Dented Defect Detection On Cylindrical Type Battery Via Vision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vinoad, Ganesan (2015) Image Enhancement By Detecting And Removing Rain In Digital Images. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Voon, Shing Ling (2009) Study Of Palm Oil Fiber For Filtration Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

Wan Amiruddin, Wan Mustapha (2008) Pembangunan Prototaip Sistem Pengukuran Penggunaan Bahan Api Menggunakan Meter Aliran Tunggal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Farhan, Wan Jusoh (2015) Surface Roughness Measurement By Using Image Processing Based Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Akram , Shukri (2011) Carbon Nanotubes Related To Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Asyraf, Wan Zakaria (2008) Carburizing Effect On Impact Toughness Of Low Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Azhar , W Mustafa (2008) Detector System For Sleepy Driver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Hafiz, Wan Harun (2011) Effect Of Nano Calcium Carbonate On Epoxy Composite Reinforced Recycle Rubber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Muhammad Faiz, Wan Mohamed Arshad (2015) Role Of Intermetallic Compound On Thermal Crack Propagation Of Lead Free Solders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Shela Ezwane, Wan Jusoh (2012) Analysis On The Effect Colour Temperature Of Incident Light To Inhomogeneous Object In Industrial Digital Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nuhairi, Wan Salleh (2015) Implementation Of One Way Communication In Fiber Optic Cable For Development Of Microphone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nur Fateehah, Wan Abdullah Shani (2015) Study On Superhydrophobic Surface Of Green Magnetic Sheet From Durian Shell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nuraini, Mohd Jamil (2011) Investigation On Effect Of Various Speeds On Springback Characteristic Of Aluminum Alloy Sheet 6061. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nurul Fatihah, Wan Mohamad (2010) Hibiscus Cannabinus L. Brick Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nurul Shahdan , Wan Ghazali (2014) Ergonomic improvements on shock mitigating boat seats for yatcht cabin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wang, Chenqing and Abdul Rahman, Azrul Azwan and Seliger, Günther (2012) A Case Study: Feasibility and economic analysis for advanced automation in spoke rim assembly for motorcycle towards sustainability. In: Sustainable Manufacturing - Shaping Global Value Creation. Springer Berlin Heidelberg, pp. 387-392. ISBN 978-3-642-27289-9

Wiradani, Md Ali (2010) Motion Tracking System Using Computer Vision With Opencv Source Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Sau Keong (2005) Numerical Study Of Two-Dimensional Transient Heat Conduction Using Finite Element Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yu Wah (2008) Design And Development Of Prototyping High Pressure And High Temperature Steam Cleaning Jet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Gao Jie (2016) Quality Checking And Inspection Using Machine Vision Technique. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Wong, Jiun Yet (2008) An Experimental Study On Building Vibration At Industrial Campus (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Poh Ling (2015) A Signal Processing Perspective With Normalized Silhouette Image (NSI) And Shape Fourier Descriptor (SFD) Towards Human Silhouette. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yaakob, Mohd Yuhazri and Sihombing, Haeryip and Perumal, Puvanasvaran (2012) STUDY OF THE OPTIMUM CONDITION TOWARDS THE INDUCING PARAFFIN WAX LDPE. International Journal of Engineering & Technology IJET-IJENS, 10 (4). pp. 9-12.

Yahaya, M.S and Noordin, A. and Ahmad, S. and Mohamad Sapiee, M.R. (2012) Engineering Technology Program In Malaysia: A Market Survey. In: The International Conference on Teaching & Learning in Higher Education (ICTLHE 2012) in conjunction with the 4th Regional Conference on Engineering Education and Research in Higher Education 2012 (RCEE 2012 & RHEd 2012), 10-12 April 2012, Seremban, Negeri Sembilan.

Yang, Kok Wei (2008) An Experimental Study On The Propagation Of Vibration And Comparison Of Damping In A Steel Support Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yao, Tee Seng (2010) Machine Vision In Character Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Mathematical function optimization using AIS antibody remainder method. International Journal of Machine Learning and Computing, 1 (1). pp. 13-19. ISSN 2010-3700

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) A swarm based artificial immune systems for solving multimodal functions. Applied Artificial Intelligence, 25 (8). pp. 693-707. ISSN 0883-9514

Yap, David Fook Weng and Wong, Yan Chiew and Noor Shahida, Mohd Kasim and Ngo, Hea Choon (2010) Analysis on the Performance of the Long-Wavelength Vertical-Cavity Surface-Emitting Laser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Sim, Edwin Y. S. and Yaw, M. W. (2011) ARTIFICIAL IMMUNE ALGORITHM BASED GRAVIMETRIC FLUID DISPENSING MACHINE. In: Eleventh International Conference on Hybrid Intelligent Systems (HIS 2011), 5-8 December 2011, Malacca.

Yap, David F. W. (2012) An Adaptive Immune Algorithm based Gravimetric Fluid Dispensing Machine. Journal of King Saud University - Computer and Information Sciences, 24. pp. 49-57. ISSN 1319-1578

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Antibody Remainder Method Based Artificial Immune System for Mathematical Function Optimization. In: 3rd International Conference on Machine Learning and Computing (ICMLC 2011) , 26-28 Feb 2011, Singapore.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Artificial Immune System Based Remainder Method for Multimodal Mathematical Function Optimization. World Applied Sciences Journal, 14 (10). pp. 1507-1514. ISSN 1818-4952

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Artificial Immune System based on Hybrid and External Memory for Mathematical Function Optimization. In: 2011 IEEE Symposium on Computers & Informatics, 20-22 March 2011, Kuala Lumpur.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) A hybrid artificial immune systems for multimodal function optimization and its application in engineering problem. Artif. Intell. Rev., Online (Online). ISSN 0269-2821

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) Particle Swarm based Artificial Immune System for Multimodal Function Optimization and Engineering Application Problem. Trends in Applied Sciences Research, 6 (3). pp. 282-293. ISSN 1819-3579

Yap, Sin Yin (2016) Effect Of Thermoplastic Mesh Incorporation On The Mechanical And Physical Properties Of Fibre Reinforced Laminate Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yasseer , Abdullah (2014) Paddy fiber as an alternative sustainable acoustic absorber material. Masters thesis, UTeM.

Ya’acob, Norsuzila and Yusop, Norbayah and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Mohd Salleh, Mohd Khairul (2012) Observation of Tweek Characteristics in the Mid- Latitude D-Region Ionosphere. In: 2012 IEEE Symposium on Wireless Technology and Applications (ISWTA), 23-26 September 2012, Bandung, Indonesia.

Yean , Fook Cheng (2009) Effect Of Nanofiller (Pristine Montmorillonite And Hydrotalcite Lamellar Clays) Of Corrosion Activities On Paint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeap, Hong Kheng (2016) Mechanical And Physical Analysis On The Effect Of Commercial Aluminium Mesh In Fibre Reinforced Laminate Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeck, Wai Hoong (2011) Fatigue Strength And Behaviour Of Notched Steel Specimens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yee , Jia Huea (2009) Investigation Of Surface Roughness Between The Conventional And Climb Milling For Aluminum Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeoh, Seng Fu (2010) Corrosion Behaviors Of Tool Steel In Tannic Acids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeow, Eu Jin (2015) Determine Tensile Properties Of Dry Carbon Reinforced Epoxy Composite Using Hand Layup Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Poh Yee (2010) The Study Of Palm Oil Fiber For Filtration Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Zi Wha (2015) Research Viration On Wideband Linear Resonant Generator Energy Harvesting Device For Remote Sensing Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong Mahmod Iskandar , Ab. Wahab (2007) Lapisan Sempadan Bergelora Pada Plat Rata Dengan Pelbagai Kekasaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yoong , Thiam Long (2006) A Study On End Quench Process Of Carbon Steel Low Alloy Steel And Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuniawan, Dani and Ito, Teruaki and Mohamad, Effendi (2013) A proposal of total productive maintenance training system. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Yusop, Norbayah and Mohd Aris, Nor Azlan and Mohd Chachuli, Siti Amaniah and Meor Said, Maizatul Alice (2014) Characteristic of Tweek Atmospherics Observed in Mid-latitude using AWESOME VLF Receiver. Research Journal of Applied Sciences, Engineering and Technology. pp. 1-7. ISSN 2040-7459

Yusop, Norbayah and Ya’acob, Norsuzila and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Idris, Azlina and Mohd Ali, Darmawaty (2012) Nighttime D-Region Ionosphere Characteristics from Tweek Atmospherics observed in the North America Region. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) , 11-13 December 2012, Melaka.

Yusop, Norbayah and Ya’acob, Norsuzila and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Idris, Azlina and Mohd Ali, Darmawaty (2012) Nighttime D-Region Ionosphere Characteristics from Tweek Atmospherics observed in the North America Region. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11-13 Dec 2012, Melaka.

Z

Zaidi, Zolkefle (2015) Study The Behaviour Of Different Elements In Ansys Finite Elements Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaim Zakwan, Mohamad (2015) Penyiasatan Perambatan Gelombang Akustik Pada Struktur Konkrit Bertetulang Dengan Batu Baur Tertanam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Ali, Mohd Basri (2016) Influence Of Elevated Temperature On The Fatigue Fracture Surface Hardness Of AA6061. Journal of Engineering and Applied Sciences, 11 (10). pp. 2130-2135. ISSN 1816-949X

Zakaria, Kamarul Ariffin and Ad Suhadak, Fadrah Hanim and Ali, Mohd Basri and Abdullah, S. and Ghazali, Mariyam Jameelah (2017) Influence Of Mechanical Properties On Load Sequence Effect And Fatigue Life Of Aluminium Alloy. Journal of Mechanical Engineering and Sciences (JMES), 11 (1). pp. 2467-2477. ISSN 2289-4659

Zakaria, Kamarul Ariffin and Jimit, Roy Hanson and Ramli , S.N.R. and Abdul Aziz, Azizuddin and Bapokutty, Omar and Ali, Mohd Basri (2016) Study On Fatigue Life And Fracture Behaviour Of Fibreglass Reinforced Composites. Journal of Mechanical Engineering and Sciences (JMES), 10 (3). pp. 2300-2310. ISSN 2289-4659

Zaleha, Mustafa (2005) The Testing Of Fibre Reinforced Composites For Metacarpal Fixation. Masters thesis, Queen Mary, University Of London.

Zamri, Nurin Aifaa (2016) Design Optimization Of Car Jack Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Ruzaidi (2016) Surface Defect Detection And Polishing Parameter Optimization Using Image Processing For G3141 Cold Rolled Steel. PhD thesis, Universiti Teknikal Malaysia Melaka.

Zarry, Mohamad (2008) Study On The Strength And Mechanical Properties Of Biocomposite Of Palm Fibers Sandwich Matrix With ABS Thermoplastic For Ballistic Armor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zatil Hazika, Kamaruddin (2015) Preliminary Study On The Effect Of Composition To The Mechanical Properties Of Epoxy Lalang Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zatil Hazrati, Kamaruddin (2011) Penyediaan Komposit Diperkuat Gentian Kelapa Sawit Menggunakan Teknik Pemprosesan Konvensional. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhelmi, Saad (2012) A Study The Mathematical Modeling Of Corrosion In Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhilmi , Mohamed Nawi (2014) Influence of solution process parameter to iron catalyst thin film and particle formation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhilmi Afiq, Zulkifle (2009) Electromagnetic Power Plant Base On Perendev Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafle, Muhammad Zulfirdaus (2016) Experimental Investigation Of Buckling Behavior Of Cracked Steel Cones Subjected To Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafli, Nur Izyan (2012) Optimum Heat Exchanger Network Cleaning Schedules for Crude Distillation Unit. In: 1st international conference of chemical, environment and energy, 21-23 September 2012, Kuala Lumpur, Malaysia. (Unpublished)

Zulkafli, Nur Izyan and Mahadzir, Shuhaimi and Muhammad, Noryani and Abdul Hadi, Dayanasari (2014) MINLP Model for Simultaneous Scheduling and Retrofit of Refinery Preheat Train. International Journal of Energy and Environment, 5 (2). pp. 197-206. ISSN 2076-2909

Zulkapli, Nor Najihah (2016) Sol Gel Process Of Cobalt Nanopracticles Preparation As Effective Catalyst For CNT Growth Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkefli, M. H. and Mohd Annuar, K. A. and Johari, S. H. and Mohamad Sapiee, M. R. and Ahmad, S. (2015) Graphical User Interface (GUI) Controlled Mobile Robot. Journal of Advanced Research in Computing and Applications, 1 (1). pp. 43-50. ISSN 2462-1927

Zulkifli, Abdul Majid (2005) Design And Manufacture Of A Spectacle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Azni (2016) Optimization Of Conceptual Manual Wheelchair Design Using Integrated QFD And DFMA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuraida, Hamzah (2015) Effect Of Annealing Temperature On Electroless Ternary Nickel Alloy Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuraidah , Zainudin (2014) Multi objectives optimization of cutting parameters in machining cellulose based hybrid composites. Masters thesis, UTeM.

Zurina, Zaul Kafilai (2006) The Use Of Alumina In Adhesive: Flexible Polymer Ceramic Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Sun Nov 19 16:56:03 2017 MYT.