Browse By Repository:

 
 
 
   

Items where Year is 2017

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items: 1212.

-

-, - (2017) CNC Machinery Troubleshooting And Calibration. -. (Submitted)

-, - (2017) Fitness Aerobic Training. AFC. (Submitted)

-, - (2017) Patent Filling With My IPO. Perbadanan Harta Intelek Malaysia, Kuala Lumpur, Malaysia. (Submitted)

A

A.Fadzil, Nur Fazreeha Ameelya (2017) The Optimization Of Cold Metal Transfer (CMT) Welding Process Parameters On 5052 Aluminium Alloy Tensile Strength Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

ABDULLAH, Mohd Azman and Abd Munir, Fudhail and Mat Yamin, Ahmad Kamal and Jenal, Ruztamreen and Mat, Shafizal and Mat Dan, Reduan (2017) REPORT FOR CONTINUING ACCREDITATION 2017 (RCA 2017). Universiti Teknikal Malaysia Melaka, Universiti Teknikal Malaysia Melaka. (Submitted)

AL-Hadhrami, Riadh Abdul Rahman (2017) Investigation Of Minimum Water Consumption At PCB Manufacturing Industry Using Water Pinch Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Aziz, Muhammad Azraei (2017) Development Of IoT Smart Home Controller Using Biosensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ab Halim, Nabilah (2017) Effects Of Boronizing On Sharp Cornered Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Latif, Norhazlia (2017) Conceptual Design And Fabrication A Novel Energy Harvester For Malacca River. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Muhammad Syakir (2017) An Experimental Investigation Of Performance And Gasseous Exhaust Emission Of A Diesel Engine Using Blends Of A Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahim, Siddiiq (2017) Investigation On Turbine Blade's Performance By Using 3-Dimensional CFD. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ab Rahman, Fateihah (2017) Investigation Of Tribological Performance Of Waste Lubricating Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Mohd Khairul (2017) Development Of Grip Strength Monitoring System For Stroke Patient. Project Report. UTeM, Melaka. (Submitted)

Ab Rashid, Mohd Zamzuri and Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ismail, Zool Hilmi (2017) A New Controller Approach Using Mixed Linear Quadratic Gaussian (LQG) / H-Infinity To Improve Trajectory Tracking Of Nonholonomic Non Wheel System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razab, Huzaimah (2017) A Study On Tensile Properties Of Acrylnitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Razak, Muhammad Amirul Asyhraf (2017) Development Of Solar Based Water Circulation Machine For UTeM Lake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abang Let, Abang Mohd Elna Fiqri (2017) Facial Characteristic Of Product Preferences Based On Phi Approach Towards Aesthetics. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Azrul Muhaimin (2017) Generating Electricity From Tyre Rotation System Using Statistical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Aziz, Ihsan Fikri (2017) Development Of Automatic Healthcare System By Using GSM For Paralysis Patient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Muhammad Syahril (2017) Development Of Small Portable Air Conditioner By Peltier Module. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Aziz, Syazxerlin (2017) Line Balancing Using Lean Manufacturing Tools At Balloon Packaging Department. Project Report. UTeM, Melaka. (Submitted)

Abd Ghafar, Abdullah Ariff (2017) Development Of Portable Lifter To Lift Outdoor Unit For Split Type Air-Conditioning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hamid, Mohammad Amirul (2017) Development Prosthetic Knee Mechanism Of Anterior Cruciate Ligament (ACL). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Hamid, Mohd Sofian (2017) The Effect Of Slat And Flap To The Aerodynamics Performance Of An Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Hamid, Muhammad Haziq (2017) Experimental Investigation On The Effect Of Fuel Temperature On The Performance Of Spark Ignition Engine With Hydrogen Peroxide-Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Jakfar, Nur Syiefa (2017) Study On Sandwich Structure Using Banana Pseudo-Stem Frp As Skin Material For Environment Sustainability. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Latif, Muhammad Fadzilan (2017) The Development Of Portable In-Situ Open Circuit Potential Test Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Nur Izzati (2017) A Study On Bending Properties Of Acrylonitrile Butadiene Styrene (ABS) Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Majid, Nurul Fazura (2017) The Roles Of Product Attributes Towards Generation Y Shopping Interest. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manap, Nurulfajar and Sulaiman, Riza and Darsono, Abd Majid and Mat Ibrahim, Masrullizam and Hairol , Izzuddin (2017) Enhanced Image View Synthesis Using Disparity Depth Extraction For Efficient Performance In Stereo Vision Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Mudtalib, Nur Elina Shahrina Amza (2017) Synthesis Of Graphene Nanoplatelets Using Chemical Vapour Deposition And Waste Cooking Oil As Carbon Feedstock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Muin, Najihah (2017) Influence Of The Work Hardening On Springback Of The U-Bend 316L Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah and Mohd Saleh, Afferry and Sidek, Siti Nurfarhana and A. Bakar, Munirah and Wan Ismail, Wan Syarma Adila (2017) Advanced Machining (BETP 3584) Project Arm Link Aerostructural Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Mohammad Safwan (2017) Design And Fabrication Of An In House Automotive Wheel Rim Testing Equipment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahim, Muhammad Mustaqim (2017) Development Of IoT Wheelchair For Rehabilitation. Project Report. UTeM, Melaka. (Submitted)

Abd Rahim, Nur Eizzah (2017) The Effectiveness Of Media Advertising In Building Up Brand Positioning Towards Household Product. Project Report. UTeM, Melaka. (Submitted)

Abd Rahim, Rosman and Kok, Swee Leong and Lau, Kok Tee and A Aziz, Khairul Azha and Mustaffa , Izadora (2017) Model And Experimental Verification Of Hydrodynamic Coupling Piezoelectric Cantilever In Different Viscoelastic Environments. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Mohd Shamsul Izhar (2017) Design And Analysis Of The Suspension System For The Agricultural Smart Mover With Using Total Design Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Muhammad Khorruddin (2017) Smart Street Lighthing On Highway. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Rahman, Najwa (2017) Development Of Surveillance System Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rama, Nur Syafiqah (2017) Development Of A Smart Baby Stroller Using Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Mohamad Izreen (2017) Application Of Converted Mode For Defect Defection In Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Safiah (2017) Bandwidth And Gain Enhanced Of Patch Antenna With Metamaterial Waveguide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Salleh, Mohamad Syazuan (2017) Study Of Cabin Temperature Of The Car Parked Under Various Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Samad, Afiq Fadhli (2017) A Study On User Acceptance Towards The Use Of Online Payment Services. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd Samad, Md Fahmi and Ahmad, Robiah and Jamaluddin, Hishamuddin (2017) Investigation On Performance Of Parameter Magnitude-Based Information Criterion For Optimum Model Structure Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Wahid, Syakira (2017) Development Of Car Temperature Cooling Control By Using Magnet Code. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Kadir, Mohammad Sallehudin (2017) Development Of HVAC Damper Temperature Controller Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abd. Wahab, Nurul Hawa (2017) The Adoption Of Smartphone In Rural Area At Perak. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdillah, Azfar Solihin (2017) Mereka Bentuk Dan Fabrikasi Mesin Pemprosesan Bagi Penghasilan Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Mohamad Azim (2017) Fabrication Of Electronic Fuel Injector Tester For Education Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Liana (2017) Optimization Of Tribological Performance For Purify Engine-Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nur Syafiqah (2017) Design And Development Of Fly-Mosquito Trapping Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Hidayah (2017) Implimentations Of Modern Tools To Improve Project Management At The Public Works Department (JKR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Nurul Saqinah (2017) Development Of Emergency Pack For Camper By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Gaffar, Muhammad Sayyid (2017) Investigation Of Load Bearing Capacity On Different Bio-Lubricant Enhance By Nanoparticles Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Garapar, Abdul Rahiman (2017) Study Of Glass Tint Effectiveness As Heat Resistant In Buildings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghapar, Muhammad Faez (2017) Characterization Of A Wideband Nonlinear Vibration Absorber Using Curved Constrained Cantilever Beam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Nor Faizah (2017) The Optimization Of Friction Stir Welding Parameter For Aluminium 5052 By Using Full Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Abdul Wafi (2017) Effects Of Solvent On TiO2 Sol-Gel Thin Films. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nurul Aqilah (2017) The Influence Entrepreneurial Orientation Towards Business Performance Among SMEs In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Jalil, Muhammad Hafizzul Saffuwan (2017) Design And Development Of A Checking Fixture For An Automotive Press Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Aida Fazliana (2017) A New Algorithms Of Time-Frequency Analysis Technique For 3-Phase Voltage Source Inverter Faults Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Karim, Kasrul and Bugis, Ismadi and Abdullah, Abdul Rahim and Mohd Jamil, Mohd Luqman and Jidin , Auzani and Ahmad Tarusan, Siti Azura (2017) Independant Control Scheme For Sub-Bearing Permanent Magnet AC Motor Drive. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Latef, Muhammad Syazwan (2017) Design Of Water Filter System Containing Rice Husk And Kapok Fiber For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manah, Syed Ahmad (2017) The Development Of Noise Analyzer System And Data Reliability Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Manap, Muhamad Naim Fahmi (2017) Investigation Of Tool Wear And Surface Roughness When Machining AISI 1045 With CIP Pressed Ceramic Cutting Tool. Technical Report. UTeM, Melaka. (Submitted)

Abdul Munir, Muhammad Syafiq (2017) Thermal Stress Analysis On Disc Brake Rotor For NGV Vehicle By Using Finite Element Analysis (ANSYS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Radzak, Muhamad Rejab (2017) The Factors Of Information And Communication Technology (ICT) Adoption Among Small And Medium Enterprises (SMEs) In Malaysia A Study Of Food Beverage Sector At Terengganu. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Rahim, Muhammad Atikkullah (2017) Design And Development Wind Turbine Generator By Using Arduino. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahim, Muhammad Rafiq (2017) Design And Development Of Vision Guided Height Adjustable Conveyor Platform On Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Nor Rahimah (2017) The Influence Of Situational Leadership In Family Business Towards Succession Planning At SME's Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Muhammad Syahir Afif (2017) Harmonic Minimization Of A Single Phase Cascaded H-Bridge Multilevel Inverter. Technical Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Muhammad Syahir Afif (2017) Harmonic Minimization Of A Single Phase Cascaded H-Bridge Multilevel Inverter. Technical Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Nabil Haikal (2017) Development And Optimization Of Portable Vacuum Clamping. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahman, Noor Farahana (2017) Applications Of Open-Source CAE Tools In Mechanical Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nurul Amirah (2017) Surface Finish Improvement Using Retraction Method For Fused Deposition Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Mohamad Hakim (2017) Development Of GPRS Signal Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Hanim and Salehuddin, Fauziyah and Shaari, Sahbudin and Haroon, Hazura and Mohd Zain, Anis Suhaila and Md Shah, Wahidah (2017) Enhanced Mach Zehnder Interferometer (MZI) Optical Modulator On Silicon-On-Insulator (SOI) Using Tapered Structure For Improved Performance In Wavelength Division Multiplexing (WDM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Nur Amiera Ashraf (2017) Analysis Performance Of Fiber Optic Sensors In Fully Synthetic Engine Oil Monitoring System With Different Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Nur Awanis (2017) Controller Design For Nonlinear Motorized Prosthetic Hand System. Project Report. UTeM, Melaka. (Submitted)

Abdul Razak, Nurul Ameera (2017) Development Of Fiber Optic Sensor For Semi-Synthetic Engine Oil Performances With Different Concentrations. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razak, Razaiman (2017) The Factors Influencing The Implementation Of Lean Manufacturing The Case Of Oriental Food Industries Melaka,Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Razi, Muhammad Haidhir Firdaus (2017) A Development Of Motorcycle Engine Oil Performance Monitoring System Using Fiber Optic Cable. Project Report. UTeM, Melaka. (Submitted)

Abdul Samat, Abdul Hafiz (2017) Select And Install Engine For Agricultural Smart Mover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Samat, Fifiyana Asmida (2017) The Effectiveness Of Promotional Strategies In Enhancing Customer Awareness In Unit Trust Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Shuib, Mohamad Fadzril Izad (2017) Understanding Tourist Motivation Factors For Product/Services Planning And Promotion To Boost Melaka Tourism Sectors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahab, Farizal Muzaffar Hafiz (2017) Seminar Whistle Blower, Pemahaman Akan Peranan Dan Kepentingan Pegawai Penerima Dan Pemberi Maklumat Bagi Jabatan Dan Agensi. Institut Pengurusan Dan Integriti Melaka (INSPIM), Melaka, Malaysia. (Submitted)

Abdul Wahab, Muhamad Syafiq (2017) The Model Of Deforming Mode Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Wahid, Nadia Mazwa (2017) Effect Of Repair Welding On Pipes With Dissimilar Materials. Technical Report. UTeM, Melaka. (Submitted)

Abdul Zali, Muhammad Ridzuan (2017) Investigation Of Energy And Cost Effectiveness Between Electric Water Heater And Energy Harvested From 1.0 HP Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdulghani Mohammed, Saeed Mohammed (2017) Comparison Of Linear And Intelligent Control For A Nonlinear Electro-Hydraulic Actuator Systems. Project Report. UTeM, Melaka. (Submitted)

Abdullah, Fatin Nadia (2017) Experimental Investigation On Mechanical Properties Effect For Different Orientation Of Kenaf Fiber Composite Through Tensile And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohd Fairuz (2017) Fabrication Of Emergency Tyre Inflator Generated From Motorcycle Exhaust Gas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Sharifuddin (2017) The Effect Of Thermal Processing On The Properties Of Reclaimed Carbon Fibre. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdullah Kamil, Puteri Eliani Fikri (2017) Layout Analysis And Improvement In A Manufacturing Industry - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Abidin, Siti Nuratiqah Aliana (2017) Development Of Plant Moisture Monitoring System Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Bakar, Hafizul Aliff (2017) DC Motor Speed Control Using Measured Distance By Ultrasonic Sensor. Project Report. UTeM, Melaka. (Submitted)

Abu Bakar, Mohd Fairuznizam (2017) Flat Plastic Part Optimization In Injection Moulding Of Pure Polypropylene And Polypropylene With Talc Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Muhammad Azad (2017) Conversion Of Go-Kart To E-Kart Mounting Design And Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanifah, Hariz (2017) Introduction Of Double Gyroscope Concept For Motorcycle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Adnan, Ahmad Sallehuddin (2017) Design And Development Of Dough Proofer Machine For SMI Bakery Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Anis Azwa (2017) Development Of Automated Key Management System Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Saidatul Aqilah (2017) Study The Recommended Weight Limit Of Lifting Activity And Low Back Pain Of Workers At Layup Workstation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Afandi, Siti Fatimah (2017) Muscle Activity Analysis Using Surface Electromyography (sEMG) For Passenger While Riding Moving Train In Prolonged Stand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ag Puteh, Awang Faruq Haqeemy (2017) Experimental Study On The Dependency Of The Lithium-Ion Battery And Temperature Using Chi-Square Independent Test. Project Report. UTeM, Melaka. (Submitted)

Ahamad, Muhammad Imanuddin (2017) Design And Develoment Of IoT Quadcopter Using Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Akmal Abdul Rahim (2017) Spare Parts Optimization (Valve) For Boiler At Coal Fired Power Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Ana Mardia (2017) The Factors Influencing Consumers Purchase Decision Toward Innovation Packaging Products. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad, Azharudin (2017) Optimization Of RTCS Main Frame By Using Numerical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Madiha Husna (2017) Optimization Of Friction Stir Welding Parameter On Aluminium 5052 Alloy By Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohamad Alif Fayumi (2017) Design And Analysis Of Foldable Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Mohd Syahron Naim (2017) Development Of Tire Pressure Alarm System For Motorcycles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Nurulnabilah (2017) Preparation And Characterization Of Hematite Iron Oxide/CNT For Photocatalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Akmar, Ahmad Zahin (2017) Design Of Automatic Workplace Clamp For Bridgeport Vertical Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azan, Amirah Diyana (2017) Effect Of Layer Thickness And Fill Angle On Flexural Properties Of Carbon Fibre Reinforced ABS Printed Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Azhar, Izzaim Danish Fathullah (2017) Electrostatic Chamber Development For Dust Collector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Bakhtiar, Nur Izzati (2017) Design And Development Of Seated Foot Press Assistive Device For Return To Work Rehabilitation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Dugel, Muhamad Sufian (2017) Implementation Of Safety Divider Downhill Road With The Transmutation Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Fadzi, Ahmad Ridhwan (2017) Corrosion Behaviour Of Mild Steel Coated With Epoxy-Graphene Film In 3.5 wt.% NaCI Solution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hanafiah, Syahirah Hanani (2017) Active Control Of Quarter-Car Suspension System Using Linear Quadratic Regulator. Project Report. UTeM, Melaka. (Submitted)

Ahmad Jalal, Norsyazwani (2017) The Impact Of Performance Family Business Implement Succession Planning: Study In SMEs Melaka, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khairi, Muhammad Syahmi (2017) The Development Of Semiautomatic Vertical Ladder For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Mawardi, Adilla Fasha (2017) Effect Of Applied Load And The Sliding Speed On The Subsurface Deformation Of Wear On Hybrid Metal Matrix Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Murad, Murzidah and Jabar, Juhaini and Ithnin, Hafini Suhana (2017) Technology Adoption Readiness and AMT Implementation in Manufacturing SMEs. Working Paper. PERTANIKA. (Submitted)

Ahmad Nahran, Luqman El Hakim (2017) Experimental Investigation On Energy Absorption Capacity Of Mild Steel Cone Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nawir, Nur Amalina (2017) Development Of The Home Appliances Controller Based On DTMF Signal. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Nordin, Mohd Firdaus (2017) Design Of Integrated 3D Printer Recycle Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sabri, Muhammad Irshad (2017) Smart Monitoring Water Quality Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad Shahnon, Nurul Shafiqah (2017) The Impact Of Inventory Management Toward SMEs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajudin, Ahmad Farhan (2017) Fluidized Bed Granulation Process : Effect Of Chamber And Binder Temperature On Granule Physical Properties. Project Report. UTeM, Melaka. (Submitted)

Ahmad Yusoff, Ahmad Ramadhan (2017) Application Of Knowledge Based Engineering In Designing Automobile Rim And Macros In CATIA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zahidi, Muhammad Zulfadli (2017) Experimental Study On The Effect Of Air-Fuel Ratio On Performance Of Spark Ignition Engine Fueled With H2O2 Gasoline Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Ismail, Amar Awad Mohamed (2017) Development Of Obstacle Avoidance Algorithm For Robotic Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmed Salem, Mohammed (2017) The Investigation Of Trajectory Generation Of A Curved Wall Brick Laying Using 5 Dof Mobile Robot. Project Report. UTeM, Melaka. (Submitted)

Ahya'Arif, Nurfathiah Najwa (2017) Business Simulation In Entreprenurship Education : An Empirical Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Akmad, Norhazila (2017) A Study On Interactive Point Of Sales (IPOS) Acceptance In Insurance Sector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Akmal, Suriati (2017) Ontology-Based Approach To Elicit Precise Information For Accurate Automotive Product Development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Al-Bakri, Abdulrahman Mohsen Saleh (2017) Design Of Control And Integration Strategy For Multiple Handling System Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alamin, Mohammad Al Akeef (2017) Implementation Of Energy Monitoring For Solar System. Project Report. UTeM, Melaka. (Submitted)

Aldarji, Adeb Ahmed Saeed (2017) A Study On The Effect Of Varying Fiber Contents To The Physical And Moisture Absorption Characteristics Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Alexander (2017) Investigation Of Contamination In Ball Bearing Operated Under Hexagonal Boron Nitride (hBN) Nanoparticle Additives Mixed With Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Mohamed, Ahmed Abbas (2017) A Modified PID Controller For DC-DC Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali Mohammad, Sulaiman (2017) Control And Navigation Of Aerial Drone In Harsh Environment Using APM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Farah Nurhidayah (2017) Design For Improvement Of Metrology And Inspection Of Integrated Circuit For Accuracy Check Using Smartscope Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Ismail and Norhan, Norazizone (2017) Kursus Pra Persaraan. The Competency Trees, Kuala Lumpur,Malaysia. (Submitted)

Alias, Nor Hasrin Nadia (2017) A Statistical Model For Determining Friction And Wear Of SK11 Ball Bearing In Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Nur Alawiyah (2017) Study On Customer Satisfaction Of Electric Bus At Melaka Historic City. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Alias, Senah (2017) The Impact Of Whatapps Application (As A Social Networking Platform) Towards The Effectiveness Of Student Learning Behavior. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alwiy, Muhamad Fauzie (2017) Design Of Personalised Insole For Production Line Industrial Workers Via Level Of Pain And Pressure Distribution Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aman, Mohd Azizi (2017) Design And Optimize The Interior Design And Furniture Mechanism Of Modular Unit Of Food Truck. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Ali, Nur Abidah (2017) Optimization Of Channel Assignment In Mobile Communication Using Tabu Search. Technical Report. UTeM, Melaka. (Submitted)

Amat Sahari, Muhammad Haziq (2017) Effect Of Rolling And Heat Treatment On Mild Steel Plate. Project Report. UTeM, Melaka. (Submitted)

Ambrin Buang, Setia (2017) Public Sector Internal Audit Conference 2017. Malaysia Institute Of Accountants, Bangsar,Kuala Lumpur.. (Submitted)

Ami, Amir Ashraf (2017) Development Of Equipment For Loosen And Tighten Of Lug NUTS By Using Gear Concepts (Special Lug Wrench Tool). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminuddin, Nurul Nadia (2017) Design And Modelling A Three-Phase Grid-Connected Photovoltaic At Low Voltage Network And Its Performance Using PSCAD Software. Technical Report. UTeM, Melaka. (Submitted)

Amir, Nor Nadia (2017) Measuring Dimension Of Service Quality For The Loyalty Of Customer Satisfaction:A Case Of Grocery Retail At Supermarket. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amir Hussein, Mohd Hanafiah (2017) Industry Monitoring Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amira Emyliana, Zailan (2017) Analyze of process parameter in 19 nm WSi2/TiO2 N-channel MOSFET using statistical modelling. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Amit, Auzai (2017) Design Of Electronic Fuel Injector Tester For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amlan, Mohamad Adli (2017) The Relationship Between Path-Goal Leadership Behavior And Group Cohesiveness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amran, Fatin Afiera (2017) Handwriting Analysis Using IMU For Small Handwriting Size. Technical Report. UTeM, Melaka. (Submitted)

Amran, Mohamad Affendi (2017) Development Of Uninterruptible Power Supply Using Variable Voltage Regulator For Low Power Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Mohamad Ikhmal (2017) Design,Analyze,Optimize And Fabricate A Bodywork Structure Of Modular Food Truck. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amran, Muhammad Aimman (2017) Design And Development Of Car Alarm System Using SMS Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anaam, AbdulRahman Taher Ahmed (2017) Study Air Flow Distribution In The Dryer System Through CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Abu Bakar (2017) Fungsi Kebarangkalian Ketumpatan Lekuk Penghampiran Dalam Penilaian Keboleharapan Pengeluaran Sistem Kuasa Hidro. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nasri (2017) Foreign Material Detection In Agarwood Using Thermal Imaging Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Nurul Husnina (2017) The Effect Of High Frequency Wave In Vibro Acoustic Method For Crack Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Argenan, Kugan (2017) Development Of A Simple Robot With Human-Robot Interaction (HRI) Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Nur Amelia (2017) Development Of Small Energy Generation From Vehicle Movement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Arindalita, Ajani (2017) The Influence Of Leverage, Profit Ability, Dividend Policy And Investment Opportunity On The Company Value : Empirical Study On Indonesia And Malaysia Banking Companies Year 2012-2016. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariston Shah, Azmeer Shah (2017) Performance Analysis Of Industrial Robot Under Loaded Conditions And Various Distances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashaari, Nur E'zatty Ashiqin (2017) The Effect Of Physiological And Physical Experimental Factors In Aerospace Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Asir, Nor Farhana (2017) Thumbprint Automatic Attendance System & Door Access By Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Aslah, Mohd Zaim Afiq (2017) A Study Of Future Of Manufacturing In The Context Of Developing Countries. Project Report. UTeM, Melaka. (Submitted)

Asri, Muhamad Zhariff (2017) Development Of Elementary School Drone Kit Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang, Nurul Nadiah (2017) Investigation Of Friction Characteristics Of SAE 15 W40 Conventional Engine Oil With Nano Additive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Zawawi, Dayang Ezzatul (2017) Bandwidth Enhancement Of Multiband Microstrip Patch Antenna For Wimax Application. Project Report. UTeM, Melaka. (Submitted)

Awizuha, Siti Nur Munirah (2017) Success Factors Of Technology Business Incubators In Malaysia : Technopreneurs Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayeob, Mohd Azizi (2017) Comparison DC And AC Of Inclined Plane Test (IPT) For Tracking And Erosion Of Insulating Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayob, Muhammed Syameel (2017) Parameter-Properties Relationship Of Thin Plate Welding By Coldarc Technology. Project Report. UTeM, Melaka. (Submitted)

Ayop Azmi, Faiz Aswad (2017) Improve Of Design And Analysis Of Hydraulic House Fence Opening Using Tap Water Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayub, Nurhan (2017) Investigation Vehicle Cabin Noise Using Arduino Data Logger. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ayuob Sultan Saif, Alnadhari (2017) Effect Of Foil Width In Magnetostrictive Transducer On The Excited Longitudinal Wave In Pipe. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azami, Muhamad Afnan (2017) Examining Innovative Marketing Technology : A Case Study On Mamee-Double Decker (M) Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azemi, Muhammad Zikri Hakim (2017) Kajian Mengenai Minyak Biji Sesawi Sebagai Bahan Api Alternatif Untuk Enjin Diesel Satu Silinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar, Mohamad Azrul Nizar (2017) Ferroresonance Mitigation Method Using Active Filter In Voltage Transformer (VT). Technical Report. UTeM, Melaka. (Submitted)

Aziz, Muhammad Fikri (2017) Real Time Video Processing For Drone-Based Lightning Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azizan, Nor Hazwani (2017) Factors Affecting Implementation Of Green Technology Among Car Users. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azlan, Muhammad Fitri Aiman (2017) Investigation On Tool Paths Programming Strategies Using CATIA V5 To Fabricate Biomedical Application On Simultaneous Five-Axis CNC Milling Machine. Project Report. UTeM, Melaka. (Submitted)

Azli, Muhammad Asyraf (2017) Numerical Solution Of Nanofluids Flow And Heat Transfer Over A Moving Surface With Thermal Radiation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azli, Siti Nurazeera (2017) The Effect Of Number Of Blades On Compressor Cascade Bladesperformance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azly, Nur Hidayah (2017) Influence Of Chemical Modification On Energy Absorption Of Starch Modified Natural Rubber Based Composites. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azman, Mohammad Nur Shafiq (2017) Development Of Light Pneumatic Artificial Muscle (PAM) For Positioning Task. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Mohd Arshad (2017) Development Of An Electronic Board That Identify And Check The Functionality Of The Commonly Used Arduino's Component (Assorted Component Checker). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Faiz (2017) The Influence Of Refrigerant Charging For Non-Ducted Split Unit 1 Horsepower Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Najmi (2017) Bees Algorithm Hybrid With Hooke Method. Project Report. UTeM, Melaka. (Submitted)

Azman, Nor Azatul Fasya (2017) Elimination Of Product Shortage At Dispatch Line In Manufacturing Industry By Using Lean Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nur Amalina (2017) The Relationship Between Entrepreneurial Characteristic And Entrepreneurial Inclination Among Undergraduates Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Yuhanis Aqilah (2017) Preliminary Study On The Effect Of Spray Coatings Parameter On Hydrophobic Coating Surfaces. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Azuwar (2017) Experimental Study On The Effect Of Vortex Generator To Aerodynamics Performance Of Aerofoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Husna 'Izzati (2017) Design And Development Of Wireless Barking Intruder Alarm For IoT Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhamad Sahrul Izwan (2017) Active Suspension System Using Stability Augmentation System For Passenger Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Muhammad Aliff Isyraq (2017) Comfort Parameters Tuning For Vehicle Suspension Pitch Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Norsyafiq Amirulamry (2017) Effect Of Citrate Bath Composition And Heat Treatment Process On The Properties Of Electrodeposited Nickel-Fly Ash (Ni FA) Composite Coating On Aluminium Alloy 7075 Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nur Deanna (2017) Factors That Affecting The Successful Of SMEs Towards Micro Enterprises In Food Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

B. Mohd Saipudin, Muhammad Afiq (2017) Soil Condition Sensor Development And Wireless Monitoring Using ESPresso. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baharom, Mohamad Faizal and Sulaima, Mohamad Fani and Mohd Dahalan, Wardiah and Abdul Kadir, Aida Fazliana and Bohari, Zul Hasrizal and Napis, Nur Faziera (2017) A Fundamental Study Of Distributed Generation Sizing And Allocation Simultaneously By Using Improved Evolutionary Swarm Particle Optimization (IEPSO) For Loss Minimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakri, Nur Nazihah (2017) The Consumer Buying Behaviour Factors Among UTeM Students Toward The Effective Use Of Instagram In University Technical Malaysia Melaka (UTeM) City Campus, Melaka. Project Report. UTeM, Melaka. (Submitted)

Basaruddin, Nur Asheera (2017) Design, Development And Of Microstrip Antenna For Short Range Communication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Baskaran, Ashvinaa (2017) Design And Development Of RFID Metal-Based Items Tracking System For Automotive Manufacturing Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baskaran, Pravend (2017) Application Of Fuzzy Logic Modelling In Fluid Friction Of Bore Pipe. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Basrey, Zafirah (2017) Bandwidth Enhancement Of Reconfigurable Planar Inverted-F Antenna (PIFA) For GPS Band Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bee, Shei Er (2017) Design And Development Of An Ultra-Low Power CMOS Voltage Regulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Beh, Eik Zhen (2017) Introductory Of Dimple To Ahmed Body Top Surface As A Drag Reduction Device By Using DoE Appraoches. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bilal, Kamalludin and Othman, Noriah (2017) Kursus Pengurusan Landskap (Penyelenggaraan Turf). Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor. (Submitted)

Borhan, Luqman Hakim (2017) The Effect Of Number Of Blades On Turbine Cascade Blade Performance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

C. Chemban, Swarna Latha (2017) Implantable In Body Antenna Design At Medical Implant Communication Service Band For Telemedicine Application. Project Report. UTeM, Melaka. (Submitted)

Carolyn, Lai Peh Nee (2017) The Factors Influence Retailers’ Acceptance Towards The Adoption Of Information Technology In Retail Sector In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chahit, Dyana (2017) Effect Of Different Pyrolysis And Annealing Temperature On Structural And Electrical Properties Of K0.5Na0.5(NbO)3 Thin Film. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chai, Agatha Yan Hong (2017) Improving Inventory Management Using Open Source Software Enterprise Resource Planning (OSS/ERP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chai, Fong Ling (2017) Validation Of Kinect-RULA System For Workstations Assessment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Chee Hoong (2017) FEM Analysis On Face Milling Of Inconel 718. Project Report. UTeM, Melaka. (Submitted)

Chan, Ji Yan (2017) Factors Influence Consumer Acceptance Towards The Prohibition Of Conventional Plastic Bag In City Centre Of Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Jing Ting (2017) Improving Densification Of Alumina-Based Ceramic For Cutting Tool By Using Different Sintering Profiles. Project Report. UTeM, Melaka. (Submitted)

Chan, Lisen (2017) Design And Develop An Energy Harvesting Circuit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Pak Hon (2017) The Impact Of Pricing And Service Quality Toward Customer Loyalty. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Sheat Lee (2017) The Development Of An Automatic Accident Alert Respond System Through IoT (AARS System). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chan, Siew Yin (2017) The Factors Influencing Consumer Purchase Intention For Cosmetic Products At Malaysian Higher Education Institution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chandi, Mohd Afiq (2017) Electronic Walking Stick For Visual Impaired. Project Report. UTeM, Melaka. (Submitted)

Chang, Chia Wen (2017) Improving Production Planning Using Open Source Material Requirements Planning (OSS/MRP) Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chang, Lee Peng (2017) UTeM Vehicle Sticker Recognition. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Charlseak, Charisa (2017) Design, Analysis And Development Of Frame, Body And Mechatronic System For A Tennis Court Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chau, Pui Teng (2017) A Study On Lean Supply Chain Practices Towards Performance Improvement In Electrical And Electronic Industry In Penang,Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Ani, Siti Noor Shafikah (2017) Effects Of Service Quality On Satisfaction Of Bank Users Around Bandaraya Melaka By Using Servqual Model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Arbaei, Nur Adlin (2017) Ergonomic Risk Factor That Contribute To Discomfort And Vibration Analysis While Riding Train. Project Report. UTeM, Melaka. (Submitted)

Che Awang, Mohd Norazizi (2017) Determination Of Wear Metals In Automotive Lubricating Oils Using UV Spectrometry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Deraman, Nurul Farhanah (2017) The Importance Of Lean Manufacturing Practices Towards Enhancing SMEs' Productivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mansor, Muhamad Syahir (2017) Rekabentuk Sistem Pengudaraan Bilik Berkuasa Suria. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Noh, Hanis Amirah (2017) The Nose Shape Design Of Bullet Train Using High Profile Curve. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Che Roslan, Mohd Hafizul (2017) Comparative Study Of Moisture Impact And Breakdown Voltage Of Various Transformer Insulating Oil Types. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Shaari, Murni (2017) Comparatives Studies Of Load Frequency Control (LFC) Using Proportional Integral (PI) Controller And Fuzzy Logic (FL) Controller For Two Area Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Zulkarnain, Che Ain Zulaikha (2017) Determination Of Weighted Efficiency Equation For SB3000HF Inverter. Technical Report. UTeM, Melaka. (Submitted)

Chea, Kah Mun (2017) Design Of High Viscosity Batter Dispensing System To Enhance The Productivity Of Kuih Bahulu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheah, Dow Sheng (2017) Effect Of Different Thickness Of Chrome Spray On The Exhaust Pipes. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Cheam, Yen Teng (2017) The Impact Of Sportswear Brand Personality On Gen Y Customer Preference In Central Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheang, Shing (2017) Design Of Product Packaging For Product Brand Communication Based On Consumer Responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chee, Kai Sin (2017) Development Of An Automated Coolant System For CNC Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Yik Pei (2017) Implementation Of Information, Decision And Action (IDA) Method In Overall Equipment Effectiveness (OEE) To Improve Manufacturing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chelliah, Ratnadevi (2017) Incorporating Space Division At Initialization Phase Of Bees Algorithm. Project Report. UTeM, Melaka. (Submitted)

Cheng, Ngee Siong (2017) Optimisation Of The Mechanical Properties Of The Engineering Plastics Via Optimal Processing Parameters Using Taguchi Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong Jia, Pin (2017) The Effect Of Different Shapes And Perforated Hole Of Direct Recycling Hdpe Plastic As Reinforcement In Concrete Structure. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Chee Seng (2017) Development Of Decision Making Process For Fused Deposition Modeling Machines Selection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Jun Ren (2017) Enhanced Performanced Of Circular Polarized Antenna By Using Metasurface. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Sze Siang (2017) Design Of Tri-Polarized Antenna. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chew, Yi Ching (2017) Development Of UTeM Bus Tracking System Using GSM And GPS Modules. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chiam, Chun Hong (2017) Integration Of An Automated Guided Vehicle System With A Programmable Logic Controlled Material Handling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew, Shet Yee (2017) Work Posture Improvement At Plastic Printing Process In Plastic Manufacturing Industry. Technical Report. UTeM, Melaka. (Submitted)

Chin, Chun Yok (2017) Design And Development Of Vacuum Forming Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chin, Ciao Hui (2017) Examining The Corporate Entrepreneurship : Case Study In Palm Oil Companies Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Jia Yu (2017) The Effect Of Flow Frequency On Heat Exchanger Used In Thermoacoustics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kean Mun (2017) Formation Of Cobalt Doped Zinc Oxide Photocatalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Khai Hong (2017) A Tangible Programming Solution To Develop Computational Thinking: Programming Block Recognition Using Convolution Neural Network. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chin, Siew Shian (2017) Factors That Influence Purchase Intention Towards Halal Food Among Engineering Students In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Zhen Yan (2017) Development Of Automatic Air Humidity And Temperature Controller With Purifying Function Controlled By Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiong, Li Shen (2017) A Triz Approach To Reduce Cycle Time In Semiconductor Test Process. Technical Report. UTeM, Melaka. (Submitted)

Choe, Chee Foong (2017) Propose And Design A Tricycle With Cleaning Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Eric Mun Hong (2017) Development Of Non-Contact Level Measurement Inspection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Fei Ming (2017) To Design An Innovation Coconut Plucking Rod With Advance Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Ivan Wei Yang (2017) Optimization And Development Of A Low Power Microcontroller For IoT Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Shiau Ling (2017) Optimization Of Flexural Strength For ABS Plastic Via Optimal Processing Parameters Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Wen Kan (2017) Design Of A Low Viscosity Batter Dispensing System To Improve The Productivity Of Kuih Rempeyek. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chong, Xin Ying (2017) Challenges On Implementation Of Visa PayWave Towards Public In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Zhi Zyong (2017) Very High Frequency (VHF) Interferometer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Choong Hui, Ling (2017) Mechanical And Physical Behavior Of Hevea Brasiliensis (Rubber Wood) Sandwich Structure Effect Of Cell Diameter Variation Of Hexagonal Core. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Christopher, Christer Ruben (2017) Design And Development Of A Novel Water Distiller Using Fresnel Lens. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Eng Seng (2017) Design And Development Of Ultra Low Power Embedded System For IoT Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Justin Wei Liong (2017) Creating Eco-Conscious Through Music:A Case Study On Young Students In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Chua, Shu Yuan (2017) Quantifying Solar Irradiance Variability Using Self-Organizing Map (SOM) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chung, Kar Yee (2017) Study Of An Aesthetic / Emotional Preferences On The Product Design Characteristics. Project Report. UTeM, Melaka. (Submitted)

D

Dasuky, Fatin Noor Afifah Afif (2017) Analysis Of Doppler Effect In LTE By Using MATLAB. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Department, Public Service (2017) Effective Oral Presentation Skills. Institut Tadbiran Awam Negara Malaysia (INTAN), Kuala Lumpur, Malaysia. (Submitted)

Derai, Gowdie Palmer (2017) Real Time Monitoring And Water Leakage Detection System In Underground Pipeline. Project Report. UTeM, Melaka. (Submitted)

Dharham, Dharmawan (2017) Electronic Throttle Body Tuning Using Non-Linear PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Doraisingam, Sankiran Dharma (2017) Fiber Optic Sensor Development On Liquid Cetirizine Detection For Pharmaceutical Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Draman@Muda, Noor Azilah and Muda, Azah Kamilah and Choo, Yun Huoy and Ahmad, Sabrina and Shahrir, Mohammad Shazri (2017) Enhance Cepstrum-Based (MFCC) Extraction Technique With Wavelet Coefficient Method For Improving Identification Accuracy. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

E

Eiry, Eldry (2017) Driving Motion Simulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Elain, Elweelee (2017) Analysis Of The Factor Affecting The Consumption Of Energy And Energy Trends In Factory 2 FTK,Using Statistical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Esmom, Ezlin Nur Aina (2017) Development Of Pigeon Hole Box System Using IoT For University Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Evelyn, Usun Kasing (2017) Design And Development Of Solar Powered Smart Dustbin For Domestic Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

F

Fadzli, Nur Syahirah (2017) Development Of Portable Air Conditioning Using Thermoelectric Cooling Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fadzli, Nurul Shahira Farhana (2017) Effect Of Acetone Vapor On Mechanical Properties Of Fused Deposition Modeling Printed Part. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Fakhrullah, Nur Syahirah (2017) Smart Home Security System Based On Internet Of Things. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Farahniza, Othman (2017) Design and development of planar antenna for short range communications. Project Report. UTeM, Melaka,Malaysia. (Submitted)

G

Gan, Chong Chun (2017) Design And Development Of Single Phase 3-Level Cascaded H-Bridge Multilevel Inverter Using Sinusoidal Pulse Width Modulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Melvin Yeou Wei (2017) Design Framework To Optimize The Walking Curve Of Klann Mechanism. Project Report. UTeM, Melaka. (Submitted)

Ghanasegaran, Yogeswaran (2017) Remote Controlled Construction System For Emergency Aftermath. Project Report. UTeM, Melaka. (Submitted)

Ghazali, Nor Izzati (2017) The Trends Of Mobile Commerce And Its Impact On The Business. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghazali, Shahira Nasreen (2017) The Innovativeness Impact Of Market Orientation Of Malaysian Manufacturing SMEs Towards Business Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ghazali, Siti Mariam (2017) The Impact Of Web Design Towards Customer Online Purchase Intention Among Gen Y In Melaka: Business School Of Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghulam Shabir, Muhammad Syazwan (2017) Development Drill Press Stand For Portable Electric Drill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Say Kheat (2017) Study Of Cold Room Performance Analysis (Temperature And Air Flow Distribution) In An Application Laboratory (Laboratory Equipment). Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

Hadzlin, Nur Nabilah (2017) A Study On Profile Design Of Scarves That Can Influence The Aesthetic Value And Product Evaluation Using Kano Model Method And IPA. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiz, Nur Afifa (2017) Design And Development Of Testing Rig For Resemblance Of Tidal Phenomena Using Solidthinking. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hafiz Afandi, Halida Hanim (2017) Cutting Tool Jig Design For Brake Disc Skimming Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairuddin, Norfazlyana (2017) Simulation Design On Power Trip Prevention Switching Circuit For Domestic Fix Demand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hairudin, Muhammad Huzair (2017) Implementation Of e-Commerce Among SMEs In Melaka That Impact On Sales Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairus Saleh, Riduan (2017) Optimization Parameter And Mechanical Properties For Aluminium 5052-H32 By Multi-Passes Butt Joint Using Friction Stir Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hakimi, Halimaton Saadiah (2017) The Effect Of Customer Value Creation Towards Firm Performance : A Study Of Tourism Industry's Competitive Advantage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Asmira (2017) Sustainable Design Manufacturing To The Needs Of Industry 4.0. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Mohd Faizal and Abu Shah, Ismail and Tamin, Mohd Nasir and Sulaiman, Saiful Naim and Samekto, Haryanti (2017) Effect Of Damage Based Residual Strain From Preceding Draw Forming Processes In Crash Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nurhafizah (2017) A Study Of Fabrication Costs Of Testing Rig For River Trash Collector System With The Application Of Solid Thinking Inspire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nurul Wahida (2017) Development Of Rubber Track Wheelchair Using Arduino Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Mohammad Noor Zaidi (2017) The Study Of Luminance Effect On Surface Roughness Of Metallic Surface By Using Vision System Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Mohd Alairizzaman (2017) An Investigation On Variable System With Automatic Damper And Controllable Motor Blower Speed Using A Trainer Kit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hamdan, Norhafizah (2017) Time Waste Reduction By Simulation In Service Industry. Technical Report. UTeM, Melaka. (Submitted)

Hamedan, Norsyazura Aiza (2017) Investigation Of The Capability Of Local Palm Oil Infused With Nanoparticle As A New Additive For Lube Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamid, Fatin Aini (2017) An Investigation Of Milling Process With Inclusion Of Nanoparticles As A Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Azrul Izham (2017) Shaping The Future Of Society And Governance. -. (Submitted)

Hasan, Fatin Hanani (2017) Application Of Integrated Analytic Hierarchy Process (AHP) And Technique Of Order Preference By Similarity To Ideal Solution (TOPSIS) In Conceptual Design Selection Of Hospital Beds. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Hazmilah and Jano, Zanariah and Kamarudin, Mohd Fauzi and Yahya, Aziz and Abd Gaffar, Mohd Najib (2017) Developing Graduate Global Employability Compentency Framework Through Quadraple Helix Model Towards Sustainabble Human Capital Development. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hasan, Zulhasnizam and Shibghatullah, Abdul Samad and Che Pee, Ahmad Naim and Muhammad Mustafa, Ahmad Nizamuddin and Mohtaram, Saifuddin and Zakaria, Mohd Hafiz and Ab Hadi, Nik Azran and Abdullah, Noraswaliza and Zulkifli, Mohd A’mirul Haziq (2017) A New Simplified Decision Tree Process Based On Clustering Technique To Overcome Over Fitting Problem For Better Decision Making. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasbullah, Mohamad Faisal Zulfaqqar (2017) Development Of Portable Power Generation System With Low Cost Vertical Axis Wind Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Ahmad Firdaus (2017) Enhancing The Breakdown Voltage Of Mineral Oil Mixed With Natural Ester Oil. Technical Report. UTeM, Melaka. (Submitted)

Hashim, Ahmad Hariz (2017) Development Of An Automated Garden Irrigation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hashim, Mohamad Husaini (2017) Reducing Air Press Turbulence By CFD Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashim, Nur Azilah (2017) Factors That Influencing Online Purchasing Using Social Media Among Generation Y In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hassan, Mohd Najmi (2017) The Extent Usage Of Green Supply Chain Management (GSCM) And Impact On Environmental Performance In Manufacturing SMEs In Melaka, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhamad Haziq (2017) Acoustic Characteristic Of Pineapple Leaf Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Faris (2017) Conceptual Design Of Drivetrain System For Beca Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Muhammad Shahirman (2017) Investigation On The Performance Mild Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Nur Hayati (2017) Performance Improvement Of Split Savonius Rotor By CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassan, Roslan (2017) Optimization Of Compression Molding Process For NR/EPDM Elastomeric Material. Technical Report. UTeM, Melaka. (Submitted)

Hassan Basri, Jamilah and Muhammadan, Lizawati (2017) Research Support Workshop-Empowering Skills Of Researchers. Universiti Sains Malaysia, Pulau Pinang, Malaysia. (Submitted)

Hatta, Muhaymin (2017) Technological Readiness For Crowd Funding As An Alternative Way To Finance SME In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hazizi, Al-Jannahtulnur (2017) Factor Affecting Consumer Loyalty Toward Mobile Service Provider In Melaka. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hiew, Pei Jing (2017) Social Capital Affect The Succes Rate Of Equity-Based Crowdfunding Project. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hindustan, Imran and Kok, Swee Leong and Md Saat, Mohd Shakir and Osman, Khairuddin and Abdul Rahman, Farah Khalidah (2017) A New Approach Of Designing A Self-Tunable Power Converter For Acoustic Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hissamuddin, Muhammad Hafizuddin (2017) Blue Ocean Strategy For Celcom Berhad,Maxis Berhad And Digi Telecommunications Sdn. Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hj Mortadha, Noor Mirza Syamimi (2017) Design, Analysis And Development Of Tennis Ball Collector Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hj Wan Zainul Abidin, Wan Nur Shuhada Annis (2017) Design And Develop A Stair Climber Trolley. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Hj.Abdullah, Luqman (2017) Konsep Dan Prinsip Asas Wakaf Dalam Islam. Akademi Pengajian Islam,Universiti Malaya,Kuala Lumpur, Universiti Malaya,Kuala Lumpur. (Submitted)

Hong, Mun Hoh (2017) Development Of an Automated CFD-BASED Optimization Workflow For Automotive Aerodynamic Application. Project Report. UTeM, Melaka. (Submitted)

Hong, Zhi Xuan (2017) The Planning Of Handover In 5g Technology. Project Report. UTeM, Melaka. (Submitted)

Hussain, Nadia (2017) Preliminary Study Of Mechanical Properties For Composite Reinforce Pineapple Leaf Fibre Through Impact Tensile And Torsion Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussein, Nur Izan Syahriah and Ayof, Mohd Nizam and Abdullah, Abu and Abu Bakar, Mohd Hadzley and Shamsuri, Siti Rahmah and Othman, Md Nazri (2017) Effect Of Deposition Process On Properties Of Nickel-Based Aloy Clad On Cast Iron Trim Cutter Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Huzamri, Mohd Sharimen Imran (2017) Reka Bentuk Model Sistem Pengudaraan Berkuasa Suria. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

Ibrahim, Ahmad Fitri (2017) Factors Affecting Business Success Of Small And Medium Entreprises (SMEs) In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Nur Ailisa (2017) Determination Of Clearance For The Design Of Bending Die For Looping A Cable Stayed Support Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Dr.Ahyar and Idris, Hj.Ramli (2017) Course For Certified Environmental Professional In Scheduled Waste Management (CePSWaM). Environment Institute Of Malaysia(EiMAS) Department Of Environment,Malaysia, Bangi,Selangor. (Submitted)

Idris, Mohamad Iqmal Faris (2017) Fatigue Strain Signal Behavior Of Automobile Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Mohd Ardy (2017) Baby Boomers Adoption On Mobile Health Application : A Study On Acceptance (Melaka). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Norain and Zakaria, Muhammad Zulfattah and Ahmad, Umi Hayati and Mohd Yusof, Norfadzlia and Mohd Zain, Raeihah and Md Isa, Mohamed Hafiz (2017) Optimization Of Grain Size And Moisture Content Of Young Coconut Shell And Coir (YCSC) Using Cutting-Extracting-Drying Method For Pelletization Preparation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Nur Ilani (2017) Design And Analysis On Brake Disc Skimming Machine Holder With Transfer Gear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irwan Syah, Saliza (2017) To Analyze Of Weather Seal Sound Transmission Loss By Acoustic Simulation Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Isa, Nur Afiffa (2017) A Fiber Optic Sensor On Alkaline Level Detection Using Beam-Through Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Isa, Nur Aliah (2017) Simulating The Effects Of Grid-Connected PV System In A Residential Area Using OpenDSS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Nadiah (2017) Analysis Of The Influence Factors In Modelling The Energy Use In Factory 1,FTK Using Stepwise Multiple Regression. Project Report. Universiti Teknikal Malaysia Melaka, Melaka,Malaysia. (Submitted)

Ishak, Nor Shwazni (2017) The Effect Of Cooling Slope Casting On Microstructure And Mechanical Properties Of A319 Alloy After Processed By Equal Channel Angular Pressing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Nur Hafizah (2017) Microstructure Evolution And Mechanical Properties Of Rheocast A1-5Si-3Cu Alloy. Project Report. UTeM, Melaka. (Submitted)

Ishak, Syazwani (2017) Microstrip Array Antenna With AMC Structure At 28 Ghz For 5G Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Ihsan (2017) Design And Development Of Wireless Braking System For Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohamad Amirul Asraf (2017) A Study On The Contribution Of Entrepreneurship Education Toward Entrepreneurial Skills Development Among Graduates : The Case On Higher Learning Institution In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohammad Hanif (2017) Development Of Automatic Trip Monitoring System In Distribution Box Using Global System For Mobile Communication (GSM). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ismail, Mohd Nor (2017) Temperature And Humidity Effect On Corrosion And Mechanical Properties Of Fences And Gates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohd Zaidi and Mohd Amin, Muhammad Husni and Mohd Zain, Shaharir and Badron, Mohd Sani and Harun, Jelani and Borhanuddin, Muhammad Syafiq and Muammar, Khalif (2017) Seminar Kepimpinan Dan Pemikiran Strategik, Amalan Terbaik & Model Gemilang Islam. Intitut Kefahaman Islam Malaysia (IKIM), Kuala Lumpur,Malaysia. (Submitted)

Ismail, Norhazimi (2017) Power Factor Correction For Residential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nurfarah Izzati (2017) Development Of Crack On Composite Detection Sensor Using Magnetic Induction Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Omar (2017) Tracking And Erosion Performance Of Silicone Rubber Under AC And DC Voltage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izahar, Adam (2017) Water Quality Sensor Development And Wireless Monitoring Using Arduino. Project Report. UTeM, Melaka. (Submitted)

J

Jaafar, Adib Akram (2017) Profiling Melaka On-Road Transportation Greenhouse Gas (GHG) Emissions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaafar, Mohammad Zarul Amir (2017) Development Water Billing System By Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jaafar, Muhammad Fatihi (2017) Perceived Service Quality In The Fast Food Sector:Enhancing Customer Satisfaction Using Online Service. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jahari, Nor Hidayah (2017) Tool Wear And Wear Progression Of Uncoated Carbide In Turning Titanium Alloy Ti-6AI-4V ELI Under Vegetable Oil Based Carbon Nano Fiber. Technical Report. UTeM, Melaka. (Submitted)

Jaiban, Floriena Erika (2017) Future Of Manufacturing : A Study On The Front-End Requirements Of Industrie 4.0 In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Jalil, Muhamad Suhaimi (2017) Development Of Portable Magnetic Clamping. Project Report. UTeM, Melaka. (Submitted)

Jallil, Nurul Amirah (2017) Design Of A Corner Chair To Ease The Daily Routine Of Cerebral Palsy Kids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamal Hussein, Jaavith Nazeem (2017) Remote-Controlled Electro-Pneumatic Actuator For Remote Response Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Muhammad Izzul (2017) Development Of Ultrasonic Assisted Compression Moulding Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Su'ad Hazirah (2017) Factors Affecting The Marketing Activities Of Halal Products Through Tourism Industry In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamel, Muhammad Shazni (2017) The Development Of Prototype Of Automatic Windshield Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Mohamad Hafiz (2017) Effect Of Fabric Covers On Improving Sound Absorption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamil, Noor Afizah (2017) Characterization Of Continuous Pineapple Leaf Fibre Reinforced Polylatic Acid Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jamil, Nur Zahira (2017) Implementation Of Digital Filter For Pre Processing Of Lightning Detection And Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jasni, Mohammad Hasrudzi (2017) Kajian Reka Bentuk Pada Struktur Mesin Penyiring Cakera Brek (UTeM). Project Report. UTeM, Melaka. (Submitted)

Jawatankuasa, Kejurulatihan Berbasikal Malaysia (2017) Kursus Kejurulatihan Berbasikal. Majlis Sukan Negara, Johor Bahru, Malaysia. (Submitted)

Jenal, Ruztamreen and Muhammad, Nor Salim and Mohamed Nor, Mohd Khairi and Abdullah, Zulkeflee (2017) Effect Of Steel Bars, Aggregates, And Multilayer In Reinforce Concrete Structure On Acoustic Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johan, Muhammad Naiem (2017) Study Of Mechanical Properties On Fiberglass Reinforced Plastic Pipe Under Tensile And Bending Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johar, Ahmad Mustaqim (2017) Study On Ultra Capacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johar, Hafizuddin (2017) Design And Development Of A Smart Home Power Monitoring System For Energy Awareness Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johari, Mohd Nur Fitri (2017) Study For The Effect Of Blowing Direction On Heat Transfer Of Cooling Tube By CFD Simulation And Experimental Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Muhamad Hatim (2017) Development Of The Detection Motorcycle Location Using GPS And GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Nursharul Mukhzir (2017) Design Of Wide-Band Monopole Antenna For Indoor Multi-Operations Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Johari Faisal Stephen, Amirah Afina (2017) Analysis Of Dimensional Accuracy And Surface Finish Performance For A 3D Printer Based On FDM Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Joseph, Victor (2017) Development Of Integreted RF Rectifier And Power Storage For Portable Charging System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jumali, Shamine Izaty (2017) The Factors That Influence Social Media Review Towards Customers’ Decision Making In Malaysia Food Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jusoh, Ahmad Faizul (2017) Design And Development Of Portable Superbike Paddock Stand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jusoh, Mohammad Nizarman (2017) Investigation Of Different Duct Materials Effect To Hvact Ducting Efficiency. Project Report. UTeM, Melaka. (Submitted)

Jusoh, Noorhafeza (2017) Factors Affecting Customers Generation Y's Repurchase Intention Towards Products In Melaka's Vendor Boutique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Juwahir, Eiddi Noor Azizi (2017) Experimental Investigation On Mechanical Properties Effect For New Composition Of Epoxy Resin Reinforced Kenaf Fiber Through Torsion And Impact Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

Kamaldeen, Amir Farhan (2017) Evaluation Of Fuel Properties Behaviour Of Biodiesel From Different Oil Stock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamar, Nurul Zarifah (2017) Tribological Study Using Pin-On-Disc For Polypropylene At Different Carbon Fibers Filler Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarolzaman, Mohd Faezy and Jabar, Juhaini and Othman, Norfaridatul Akmaliah and Mohd Yusof, Sitinor Wardatulaina (2017) Promotional Strategy of Koko Minda Food Industries. Working Paper. Faculty of Technology Management and Technopreneurship.

Kamaruddin, Mohamad Nasriq (2017) Real Time Face Recognition System For Automatic Door Access Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Muhammad Solehuddin (2017) Breakdown Voltage Of Polymeric Material Under Different Shape Of Electrode. Technical Report. UTeM, Melaka. (Submitted)

Kamaruddin, Muhammad Syahzani (2017) Determination Of Stalling Region For Specific Turbine Blade's Profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruddin, Nurain (2017) Delmia Ergonomics Analysis On Wheelbarrow To Improve Ergonomics Factor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudin, Ain Nurkamilia (2017) Study And Development On Pattern Classification System For Empty Fruit Bunch Based On The Age Profile Of Oil Palm (Elaeis Guineeniss) Trees. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Noor Atiqah Syahirah (2017) Lighting Strategy For Building Energy Saving Ground Floor Of Campus Technology Universiti Teknikal Malaysia Melaka, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin , Muhamad Ridzuan (2017) Smart Dustbin – Smart Garbage Monitoring System (IoT Based). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarudzaman, Nurkhuratul Aini (2017) Development Of PID-PLC Based Control Strategy For Winder System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Zaman, Mohamad Fahhim (2017) Development Of Humidity Controller Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamarulbahrin, Izlin Anne Kamelia (2017) Optical And Photoelectrochemical Studies Of Tungsten Diselenide (WSe2) Thin Films For Solar Panels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamizi, Nursyafika (2017) Effect Of PLA As Bonding Agent On The Properties Of Pineapple Leaf Fibre-Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamrul Zaman, Nur Najwa Aqilah (2017) Formulation Of Green Printing Ink For Ceramic Subtrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamsani, Silah Hayati (2017) Introduction To Swarm Intelligence And Its Application In Optimisation. Tekbac Group Of Companies, Kuala Lumpur,Malaysia. (Submitted)

Kanathasan, Vengadeshwaran (2017) Short Range Phased Array Radar System For Lightning Remote Sensing Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kasim, Dr. Mohd Shahir and Saedon, Dr. Juri and Mohd Ariffin, Prof. Dr. Khairol Anuar and Md. Ali, Prof. Madya Dr. Mohd Amran and Raja Abdullah, Prof. Madya Dr. Raja Izamshah and Anand, Prof. Madya Dr. T. Joseph Sahaya and Sulaiman, Dr. Mohd Amri and Abu Bakar, Ir. Dr. Mohd Hadzley and Abdul Aziz, Dr. Mohd Sanusi and Mohd Zakaria, Muhammad Akmal and Harun, Nurul Hatiqah (2017) Cutting Parameter Optimization Of Hybrid Micro-Rotary Wire Electrical Discharge For Surgical Device Fabrication. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kassim, Mohd Azraai (2017) Leading Transformation And Turnarounds In Academia. UTM SPACE, Kuching, Sarawak. (Submitted)

Kassim, Mohd Azraai (2017) Leading Transformations And Turnarounds In Academia. UTM SPACE, Pulau Pinang, Malaysia. (Submitted)

Katimin, Nornaziera (2017) Synthesis Of Aluminium Doped Zinc Oxide Thin Film Prepared Using Chemical Bath Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Keek, Joe Siang (2017) Development Of System Controller And Voice-Controlled Mobile Application To Control An Omni-Wheeled Mobile Robot. Project Report. UTeM, Melaka. (Submitted)

Kek, Siok Bee (2017) Factors Influencing The Consumers Adoption Of Online-To-Offline (O2O) : Empirical Evidence From UTAUT Model. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kek, Zi Xiangg (2017) Improving Stock Record Accuracy Using Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kerk, Xin Ling (2017) Factors Affecting Brand Awareness In Central Region Of Malaysia : A Study On FPTT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar, Muhamad Asyraaf (2017) The Addition Of MoDTP In ZnBuDP Induced Palm Oil Bio-Lubricant As Tribological Property Improver. Project Report. UTeM, Melaka. (Submitted)

Khairul Salleh, Nurul Syafina (2017) The Perception On Moodle Learning System As Platform For Students In Education System At Universiti Teknikal Malaysia Melaka (UTeM). Project Report. UTeM, Melaka. (Submitted)

Khoo, Chin Wuen (2017) Development of sleep monitoring system to observe the effect of ambient condition toward the quality of sleep. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khor, Ming En (2017) Smartphone-NFC based guard tour monitoring system for real time data recording (eSmartGuard). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khozari, Nur Jannah (2017) Morphological Study Using Optical Microscope Of Natural Rubber With Modified Tapioca Starch After Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

King, Teck Wei (2017) Sustainable Interior Design On Residential Buildings For Eco-Lifestyle Enhancement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kloos, Carlos Delgado (2017) Management Of A MOOC Project Within An Institution. Competen-Sea. (Submitted)

Koh, Jian Yang (2017) Experimental Evaluation Of Multifunctional Variable Refrigerant Flow (VRF) System In An Application Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koh, Sheng Yi (2017) Design A Low Cost Hair Dryer Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Fie Kie (2017) Formation Of Cobalt Coated TiO2 Nanotubes By Wet Impregnation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kong, Ching Yee (2017) Design Of Cooling System For Two Plate Mould. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kong, Jedediah Meng Hoi (2017) Drag Coefficient Reduction Of A 30° Yaw Angle Cube Subjected To Active Flow Control Device By Means Of Numerical Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kooh, Chu Aik (2017) Controller Design Of A Two-Wheeled Self Balancing Mobile Robot Base On A Simulation View Point. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kusnan, Nur Izzati (2017) Preliminary Study On Effect Of Temperature On Hydrophobic Coating On Metal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

L

Lai, Moon Chin (2017) Design And Development Of Internet Of Things (IoT) Enabled Wheelchair Inclination And Geolocation For Wheeler Rehabilitation Fitness Assessment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Xingren Kathleen (2017) The Development Of Wireless Power Transfer Technologies For Multiple Devices An Inductive Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lai, Yan Ling (2017) Ergonomics Intervention To Improve Plastic Roll Handling Process At Production Area In Plastic Manufacturing Industry. Project Report. UTeM, Melaka. (Submitted)

Lai, Ying Chau (2017) Design And Development Of Convolutional Neural Network (CNN) Enabled Smart Camera Based User Entrance Intention Detection System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lasa, Norhazirah (2017) Establishing The Design Guideline Of Customized Insole Via Pressure Distribution Foot Planar Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lasunu, Kasmiah (2017) Wear Characteristics Of SK11 In Engine Oil And Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Chu Kiong (2017) Portable Programmable Medication Reminder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lau, Kai Yan (2017) A Study On Social Influences Toward Public Awareness On Green City In Melaka State. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Khai Xin (2017) Duty Cycle Prediction Control Technique For A DC-DC Buck Converter Based On Dominant Poles Location. Project Report. UTeM, Melaka. (Submitted)

Law, Cheng Quan (2017) Investigation On Path Planning For Autonomous Mobile Robots In Partially Observable Environment. Technical Report. UTeM, Melaka. (Submitted)

Law, Puay Fong (2017) Green Procurement Strategy For Eco-Profitability : A Case Study At Konica Minolta Business Technologies (Malaysia) Sdn. Bhd. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Le, Quang Khanh and Nguyen, Hoai Luan (2017) International Conference On University 4.0 (A Framework For 21st Century Higher Education). Nguyen Tat Thanh University, Ho Chi Minh, Vietnam. (Submitted)

Lee, Chai Fen (2017) Propose Of Suitable System To Improve The Dust Collector System In Trim Booth CTRM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chee Yong (2017) Sustainable Garment Industry Toward Eco-Fashion : A Case Study At Kim Tai Garment & Trading Co. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chun Khoon (2017) Study On Mechanical Properties Of Eco-Friendly Kenaf Fibre Reinforced Metal Laminate Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, De Rong (2017) The Design And Development Of Temperature Controlled Oyster Mushroom Farmhouse Using PID Control Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Hooi Fong (2017) Accuracy Study Of Impeller On Five-Axis And Nine-Axis Machine By Using Powermill And CATIA. Project Report. UTeM, Melaka. (Submitted)

Lee, Jing Xian (2017) A Study On The Effect Of Machining Parameters, Machining Conditions And Materials On Surface Roughness In Turning Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Man Ching (2017) Development Of Smart Lighting System For Dolby Cinema Using Bluetooth Application. Project Report. UTeM, Melaka. (Submitted)

Lee, Pei Kee (2017) Environment Mapping Using Multiple Robot. Technical Report. UTeM, Melaka. (Submitted)

Lee, Poh Yan (2017) Identification Of Lateral Transfer Distance That Minimizes Twisting And Bending Motions In Workstation Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Seih Chung (2017) Structural And Optical Properties Of Zinc Oxide Nanoparticles Synthesize Via Sol Gel Auto Combustion Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Shi Min (2017) Effectiveness Of Product Placement : Factors And Impacts On Consumers’ Responses. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Sze Hwee (2017) Factors Influencing The Impulse Buying Behavior Of Customers On Food Industry In Melaka,Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lee, Vei Hung (2017) Beam Switching Ultra-Wideband Antenna For Medical Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leong, Chee Weng (2017) Reduction Of Balloon Defects In Stripping Process Using DMAIC Approach : A Case Study. Project Report. UTeM, Melaka. (Submitted)

Leong, Desmond Chen Hui (2017) Developing An Interfacing System For Home Farming By Using Labview And Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leong, Ying Yee (2017) Design And Development Of IoT-Based Parking Management Solution Using Arduino And Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Li Ying (2017) Manufacturing Productivity Improvement In Clothing Industry Using Toyota Sewing System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Leow, Mei Mei (2017) Redesign Work System For Productivity Improvement - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Leow, Zhi Li (2017) A Development Of Modular Automated Storage And Retrieval System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lieong, Chun Yin (2017) Development Of Smart Home Automation System Using Wi-Fi. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Chin Chin (2017) Effect Of Hard And Soft Segment Ratio To Vibration Damping Properties Of Polyurethane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Johnnie Zhong Li (2017) Effects Of Boronizing On Grooved Metal Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Kai Yan (2017) The Development Of Active Buoy Charging Station For Remotely Operated Underwater Vehicle (ROV) Using Solar Power. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Liew, Ming Young (2017) Effect Of Various Low Frequencies For Crack Detection In Non-Linear Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Wun Foo (2017) Behavioral Analysis Of Thermoelectric Module Under Different Configurations And Temperature Gradient. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Chee Houh (2017) Investigation On The Effects Of Human Weight On Spinal Facet Joints Using Finite Elements Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Fang Pang (2017) The Development Of Transmitter And Receiver For Remote Control Helicopter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Hui Yee (2017) Development Of An Automatic Can Crusher Using Programmable Logic Controller At FTK Canteen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kim Yew (2017) Analysis And Control Of Vibration In Machine Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Li Xin (2017) Effectiveness Of Online Marketing And Consumer Attitude Towards Sales Performance In Food Service Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ruoh Lin (2017) Effect Of Thermal Cycles On Tensile Properties Of NR-EPDM Nanocomposites For Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Seik Ping (2017) Optimization Of Minimum Span Frequency Assignment In Mobile Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Shu Ning (2017) Factors Affecting Of Gen Y Impulse Buying On Online In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lim, Yee Hwai (2017) Design And Development Of An Intelligent Wireless Embedded System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Hui Juan (2017) Experiment Of Reducing Volatile Organic Compounds Concentration In Air By Using Indoor Vertical Garden. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ling, Hung Kit (2017) Optical And Photoelectrochemical Studies Of Tungsten Disulfide (WS2) Thin Films For Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Lily Sui Feng (2017) Smart Home Electrical Appliances Controlling Via Android Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Angeline Wan Jing (2017) Brain-Machine Interface Device For Amyotrophic Lateral Sclerosis (ALS) Disease Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loh, Mun Kong (2017) Fluidized Bed Granulation Process : Study On Airflow Effect On Urea Granule Physical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ser Lee and Gan, Chin Kim and Salleh, Shaharuddin and Sarmin, Nor Haniza and Cheong, Tau Han (2017) Raster Map Extraction For PV Impact Study On Distribution Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ting Pohg (2017) Profiling Design Preferences Using Bezier Curve Towards Kansei Engineering. Technical Report. UTeM, Melaka. (Submitted)

Loh, Wai Yuen (2017) Design And Development Of BCI Application - Brain Painting Using SSVEP. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Lok, Soo Kee (2017) Accuracy Study Of Car Rim On Five-Axis Simultaneous Milling And Nine-Axis Turn-Mill Machine By Using CATIA V5. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loke, Wei Lam (2017) Destination Image, Perceived Value And Satisfaction For Heritage Tourist’s Revisit Intention To Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loo, Kun Kheng (2017) Interactive Objects For Virtual Reality (VR) Using Oculus Rift And Motion Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Loo, Soon Lii (2017) Optimal Placement And Sizing Of Distributed Generation Considering Costs Of Operation Planning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Xian Min (2017) Automated Waste Separated Machine. Technical Report. UTeM, Melaka. (Submitted)

Low, Yong Jie (2017) The Effectiveness Of Online Advertising On Consumer Behavior. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luah, Chii Hao (2017) Blade-Generator Structure Analysis And Topology Optimization Of Savonius Vertical Axis Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M. Balakirisnan, Shawn Shivaneson (2017) Investigation Of Mobile Network Coverage Performance In UTeM’s Technology Campus Using Coverage Profiling. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

M. Rajan, Loganthiran (2017) Customer Relationship Management : The Effectiveness Of Retail Stores Customer Loyalty Program In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Madzuki, Muhammad Ihsan (2017) Force Effects On Laminated Rubber-Metal Spring Using Transmissibility Test Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mageswaran, Renugah (2017) Development Of Water Resistant Particleboards From Rice Husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahadi, Mohamad Farid (2017) Comparison Study Between HSC 70 With DMU 60 EVO Using Powermill Software On Simultaneous 5-Axis Machining Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadi, Nur Athirah (2017) Tensile Properties And Swell Behaviours Of Natural Rubber Modified By Starch For Biodegradable Rubber Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahayuddin, Zahid Nasrullah (2017) Development Of Cascaded H-Bridge Multilevel Inverter Based On PWM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maheswaren, Arun (2017) Development Of Smart Table Tennis Trainer Controlled By Using Android Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mahmod, Amirul Rasyid (2017) Hardness And Microstructure Of Cockle Shell Powder Filled Recycled Polyethyelene-Terephthalate/Polycarbonate Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmud, Norazilah (2017) Study Of Vortex Tube Cooling System On Tool Wear And Surface Roughness Using Conventional Machine. Technical Report. UTeM, Melaka. (Submitted)

Mahmuddin, Muhammad Amirul Asyraf (2017) Sensorless Control Of PMSM Drives Using Voltage Model Based On Power Reactive Equation. Technical Report. UTeM, Melaka. (Submitted)

Mahrob, Noramilza (2017) Welding Initiation At The Entry Stage Of Bobbin Friction Stir Welding (BFSW). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahzan, Irna Nadira (2017) Development Of FPGA Based Portable Low-Cost Digital Signal Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Maidin, Nur Fadhilah (2017) Application Of Coconut Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Umie Rosmida (2017) Quality Improvement Using Factorial Design (A Case Study In Manufacturing Company). Technical Report. UTeM, Melaka. (Submitted)

Manakor, Eswaran (2017) Characterisation Of Wideband Nonlinear Vibration Absorber Using Adjustable Magnetic Stiffness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mansor, Masrina (2017) Development Of Milk Dispenser Using Arduino Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mansor, Nur Atiqah (2017) Deveploment Of Brake Oil Monitoring System Tool Using Application Of Fiber Optic Liquid Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marikon, Muhammad Redzuan (2017) The Investigation Of The Position Control Finger For Rehabilitation Robot Using 5DOF Robotic Arm Manipulator. Technical Report. UTeM, Melaka. (Submitted)

Martin, Aerun (2017) The Integration Of Fuzzy Logic System For Obstacle Avoidance Behaviour Of Mobile Robot. Project Report. UTeM, Melaka. (Submitted)

Marzan, Masturah (2017) Factors That Influence Customer Intention Towards Malaysian Cosmetic Market. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marzukhe, Ida Nurfarhana (2017) Ergonomic Environment Using Subjective Method Regarding Discomfort And Risk Analysis For Prolonged Standing At KTM Komuter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Masijan, Nabihah (2017) The Drivers Of Eco-Process Innovation:Empirical Evidence In Malaysia Halal Hub Food Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Masron, Nurul Ain (2017) The Relationship Between Human Resources Factors And Total Quality Management Performance:A Survey In Hotels Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Abas, Nur Hafizah (2017) Frictional Behavior Of SK11 In Engine Oil And Nanoparticles-Enhanced Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Adam, Nur Syuhada (2017) Setup Time Reduction Of Snap Fastener Machine By Implementing Single Minute Exchange Of Die. Technical Report. UTeM, Melaka. (Submitted)

Mat Ariffin, Nuramalina (2017) A Study On Ergonomic Environment Factor And Inertia That Contribute To Discomfort Inside Train. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Dan, Reduan and Ahmad, Asmala and Tee, Boon Tuan and Zakaria, Muhammad Zulfattah (2017) Thermal Management Fundamental Investigation On Alternator Regeneration System With Combined Gasoline-Hydrogen Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Dewi, Muhammad Ainol Hafiz (2017) Development Of Attendance System For Student Using Bluetooth Device Connection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Jahari, Nur Farrahim (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Sunflower Oil For Food Industry Usage By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Nor, Nurul Aqilah (2017) A Study On The Radial Slot Line Array Antenna With EBG Structure At 28 Ghz. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Pauzi, Muhammad Asrul (2017) Design Of Food Truck That Fulfill The Ergonomic Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Yamin, Ahmad Kamal (2017) AutoCAD Certified Professional Practice Exam - Part 1. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) AutoCAD Certified Professional Practice Exam - Part 2. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) AutoCAD Certified Professional Practice Test - Part 1. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Exploring the AutoCAD Program Window. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Part Modelling in AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Tutoria1 2: Parametric Modelling of a 2-D Geometry using AutoCAD 2017. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2017) Tutorial 1 : Direct Modelling of a 2-D Geometry using AutoCAD 2017. [Video] (Unpublished)

Mazalan, Muhammad Danial Farhan (2017) Optimization Of Tensile Strength Via Optimal Processing Parameter For High Density Polyethylene (HDPE) Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazelan, Muhammad ‘Azim Saniy (2017) Design And Development Of Portable U-Turn Signal System For Motor Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mazlan, Ikhwan Fakhrulhaziq (2017) Effect Of Different Welding Parameters To The Mechanical Properties Of Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Mohd Fazlan Rezza (2017) A Study On User Acceptance Towards The Use Of Live Video Streaming Technology Among Internet User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Hazim (2017) Design, Analysis And Fabricate The Prototype Of Food Truck Body. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhd Uzi Migzuan (2017) Development Of Shuttlecock Launcher With Dual Mode Trajectory System For Badminton Training Purpose. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Akhir, Noor Liyana (2017) Development Of Automatic Meal Dispenser For Pet Dietary Via Internet Of Things (IoT). Project Report. UTeM, Melaka. (Submitted)

Md Ali, Mohamad Fariq Azzad (2017) Improvement In Efficiency Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Azmi, Noramira (2017) Effect Of Fly Ash Particle Size And Composition On The Properties Of Electrodeposited Nickel Fly Ash (Ni-FA) Composite Coating On Aluminium Alloy 7075 Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Fisal, Nur Farzana (2017) Smart Accident Identification Using Web-Based System For Emergency Department. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Ilias, Omar Dani (2017) Design And Fabricate A Prototype Of Fire Safety Window Grille For Residential Unit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Noor, Muhamad Fahmi (2017) A Study On Impact Properties Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Reinforced High Density Polyethylene Composites For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Osman Ani, Mohamad Taufiq (2017) Improvement Of 12 Meter Catamaran Boat Hull Design. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Md Saat, Mohd Shakir and Darsono, Abdul Majid and Shukor, Ahmad Zaki and Kok, Swee Leong and Zakaria, Zahriladha and Mohd Azman, Su Noorazma (2017) A New Method Of Nonlinear H-Infinity Observer Design For Polynomial Discrete-Time Networked Control Systems Using Sum Of Squares Optimization Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Muhammad Iqbal (2017) Biodegradability Of Commercial Plastic Bags. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Sallehan, Muhammad Syafi (2017) Comparison Of Different Organo Zinc Compound As Tribological Properties Improver In Palm Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Suman, Emilia (2017) Factors That Influence Public Using Ridesharing Services In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Medon, Nurul Izzati (2017) Performance Comparison On PID And MIT Rule Approach For Electro-Pneumatic Position System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Ahmad, Meor Akram (2017) Sleep Sensing And Alerting System For Drivers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mhd Anuar, Nor Aqliema (2017) The Customers' Perception Towards Online Food Ordering Service Usage In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mirun, Nur Aini (2017) Investigation On Reliability Of Using Signal Processing As Refrigerant Pressure Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mister, Mohamad Zali (2017) Energy Scavenging With Shoe-Mounted Piezoelectric Power Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Moey, Chung Min (2017) Investigation On Flexural And Morphological Characteristics Of Novel Hybrid Oil Palm Empty Fruit Bunch/ Kenaf Reinforced High Density Polyethylene Composite For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Afif (2017) Development Of Public Transportation (Bus) Notification Using PIC Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Amaran, Siti Nurulheriza (2017) Factors Affecting Technology Transfer Success From Public Research Institute To SME. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Amirul, Mohd Yusoh (2017) U-shaped patch antenna with rectangular paracitic patch and PBG structure at 2.4GHz for WiMAX application by using graphine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Asri, Hairil Hashimie (2017) Development Of Face Detection And Recognition In Home Security Using Surf Feature. Project Report. UTeM, Melaka. (Submitted)

Mohamad Azlan, Muhammad Hafiz Hakimi (2017) Noise Reduction Design Of A Vacuum Cleaner. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Husni Alhadi, Mohamad Hamiroel Nazrin (2017) Designing Data Logger For RTU System In Distribution Automation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Isa, Mohd Sa'ari (2017) Optimization Of Array Wearable Antenna Using Electromagnetic Bandgap For RF Energy Harvesting And On-Body Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Jamil, Nur Najaa Mastura (2017) Effect On Vibration Amplitude In Aluminium Rectangular Plate Using Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Khairon, Nur Nabilah (2017) Design And Development Of Mobile And Detachable Counter Balance Arm Sling For Neurological Patient With Hemiparesis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Noor, Mohamad Azrin (2017) Energy Harvesting From Asphalt Pavement Roadways Vehicle-Induced Stresses For Street Lighting. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Nor, Dalila Basirah (2017) Prediction On The Reliability Of Glove Dipping Machine Using Weibull Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Pzil, Nor Faezah (2017) Design And Analysis Of Thixoforming Alternator Housing Using Advance Casting Simulation Software. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Razali, Muhammad Naif Hakim (2017) Factors Affecting The Involvement Of Women Entrepreneur In Small Enterprise. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saleh, Muhamad Ridhwan (2017) The Design Of The Agriculture Smart Mover Bodywork Structure Using Total Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Saridi, Nurul Syafiqah (2017) Resting-State EEG Functional Connectivity Analysis: Schizophrenia Patients. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Shaferudin, Atiqah (2017) Assessment Of Renewable Energy Effect Of Grid Transient Stability In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Zainal Abidin, Syarafana (2017) Effect Of High Frequency Input Location For Crack Detection In Nonlinear Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Amir Syahir (2017) Development Of Smart Baby Cradle By Using PIC16PF877A Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamed, Anis Atiqah (2017) Real Time Of Drowsiness Recognition System Based On Electrooculography. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed, Mohamed Abdalla (2017) Exploring Technology Transfer Into Somalia Based On Theory Of Destruction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Nursyazwani (2017) The Relationship Between Human Resource Management And Organizational Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Abdul Ghani, Nik Muhammad Hazwan (2017) Tribological Properties Investigation For Nanoparticle Enhanced Natural Oil-Based Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Aripin, Muhammad Nawi (2017) Fabrication Of Suspension System For The Palm Oil Plantation Agriculture Smart Mover Through Experimental And Numerical Prediction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Ayub Khan, Muhamad Haziq (2017) Response Surface Model (RSM) Of CO2 Laser Cutting. Project Report. UTeM, Melaka. (Submitted)

Mohamed Ishack, Mohamad Nidhzam Faris (2017) Real-Time Human Machine Interaction For Robotic Arm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamed Yusof, Yushaizul (2017) A Study On Acceptance Towards Consumption Of Natural Gas Vehicles Among Car Drivers In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nizar, Muhammad Safwan (2017) Influence Of Tire Stifness And Sprung Mass On Vehicle Ride Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Noor, Nurul Ezwati (2017) The Influencing Factors Contributing Towards Online Purchase Intention Among Consumers In Kelantan State. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rosli, Muhammad Hafizi (2017) Correlation Between Surface Roughness And Dust Build-Up In Fabric Duct And Galvanized Steel Duct : A Comparison. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sukeri, Ahmad Nurfaidhi Sadiq (2017) Design Optimisation Of Car Jack System For An Emergency Usage Using PDS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Yunus, Nasihah Solehah (2017) Product Service System (PSS) Acceptance Among Consumer In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Zamzuri, Noor Adilah Yasmin (2017) Tolerance Stack Analysis Using Tolcap Software For River Trash Collector System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Abbas, Saddam Hamood Ali (2017) Effect Of Defect Orientation In Pipe On Acoustic Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Al-Ghaili, Munir Mohammed (2017) Experimental Studies On The Noise Characteristics Of Ball Bearing Under Hexagonal Boron Nitride (hBN) Nanoparticle Additives In Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Khir, Siti Sakinah (2017) Application Of Programmable Logic Controller (PLC) On The Low Voltage Distribution Automation System (DAS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohammed Sobri, Nurul Aqielah (2017) The Motivation Factor Of Halal Entrepreneurship:An Empirical Evidence For SME Food Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd, Siti Zaharah (2017) Effect Of Wire EDM Process Parameters On Machining Charateristics Of Aluminium Alloy 6061 Using Taguchi Method. Project Report. UTeM, Melaka. (Submitted)

Mohd Ahadlin, Nur Farahin (2017) CFD Simulation Of A Shell And Tube Heat Exchanger; Effect Of Physical Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akhir, Siti Ruqayyah (2017) The Impact Employee Engagement On Organizational Performance:An Empirical Study Of Petronas Oil And Gas Subsiadiary. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ali, Muhammad Zakiy Izzuddin (2017) Design And Control Of Radio-Frequency Identification Based Conveyor Platform On Automated Guided Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Noor Khairul Nisa (2017) Improving Mechanical Properties Of Fused Deposition Modeling Printed Part With Optimized Parameter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Amer, Muhammad Syahrul Nezar (2017) DOE Approach In Determination Of The Optimum Welding Parameters For Three Layer Spot Weld. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhammad Aiman Ashraf (2017) Design And Develop Fire Alarm And Monitoring System Based On IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Muhammad Murtadza (2017) Experimental Investigation On Vibration And Shock Test On Packaging Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amir, Nadia Syahida (2017) Effect Of Parameters On Properties Of Sheet Metal Welded By Rocker Arm Spot Welding Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Amirza, Muhammad Idzuan Ariff (2017) Energy Usage IOT Monitoring System For Domestic Tariff In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Anasir, Muhamad Arif Ikhwan (2017) Cooling Load Estimation Using Multimedia Facilities For Educational Purpose. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Anuar, Intan Munirah (2017) Development Of An Automatic Irrigation Sprinkler System For Corn Farm Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arif, Nor Hidayu (2017) A Statistical Model For Deterimining Friction And Wear Of SK 11 In Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asannnan, Fitrasari (2017) The Application Of Pineapple Fibre Polypropylene (PP) Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asari, Nurul Asniza (2017) Demand Side Management Energy Profile Optimization. Technical Report. UTeM, Melaka. (Submitted)

Mohd Asri, Nurul Zafirah (2017) The Impact Of Jingles Advertising On Brand Awareness Towards Consumer In Melaka Food And Beverage Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azam, Muhamad Ammar Farhan Maula (2017) Synthesis Of NaxCoO2 Thermoelectric Via Citrate-Nitrate Auto Combustion Reaction. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Azemi, Muhammad Naqiuddin (2017) Investigation On The Performance Stainless Steel Impact Test Vibrational Analysis Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Abdullah Haziq (2017) Feasability Study Of Using Vegetable Oil As A Cutting Lubricant On Conventional Lathe Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman, Mohamad Azizuddin (2017) Design Of Underwater Inspection Robot Mechanical Track System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azmi, Siti Haidar Atiah (2017) Optimisation And Analysation Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Bakri, Mohamad Syahmi (2017) Investigation On Effect Of Error Order Selection In System Identification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basahahruddin, Azny (2017) Effect Of Carbon Nanotube On The Properties Of Graphite-Carbon Black-Epoxy Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basar, Jamaludin (2017) Thermal Performance Of Kenaf Composite By IES Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Basir, Mohamad Faris (2017) Determination Of Dimensional Accuracy Of A Part By Silicone Rubber Mold Using Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Basir, Nur Hazirah (2017) Study On Design For Manufacturing Of Benchmarking Design Using Fused Deposition Modeling An Entry Level 3D Printer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Desa, Kamariah Nor and Sharuddin, Noraziah and Othman, Haslina and Dol, Zafarina and Yaakub, Khairulbahiyah and Zainal, Haliza and Mat Pauzi, Shazwani Syamimi and Zakaria, Nik MAsriza (2017) Laporan Merekabentuk Perkhidmatan Perpustakaan Universiti Awam Sejajar Dengan Amanat Menteri Pendidikan Tinggi 2017. Majlis Ketua Pustakawan. (Submitted)

Mohd Esmadi, Nur Aina Mardhia (2017) Examining The Impact Of E-Marketing Web Design Within Property Industry In Kuala Lumpur, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Mohd Amir Anuary (2017) Redesign Workstation By Using Malaysian Anthropometry Data In Aerospace Manufacturing By Using Delmia V6. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fadzil, Syahirah (2017) Design Of Modular Smart Pick & Place Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farhan Han, Syaza Najwa (2017) Fatigue Analysis On Bonding Of Aluminium And Carbon Laminate Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Mohamad Firdaus (2017) To Study The Concept Of Perpetual Motion On Table Fan By Using Permanent Magnet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Mohd Lukmannul Hakim (2017) Factor Influencing Consumer Purchasing Decision Toward Facebook Advertising In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fozi, Airini An Nadrah (2017) Automated Guided Vehicle (AGV) System Based On Simultaneous Localization And Mapping (SLAM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fozi, Nur Aliaa Fazlin (2017) Development Of Automatic Water Replacement Aquarium With Fish Feeder Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Halit, Muhammad Fakhrurazi (2017) Optimization Of Vision-Guided Mobile Robot Navigation Using Dual Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hamdan, Muhammad Luqmanul Hakim (2017) Underground Cable Fault For Alternating Current (AC) Using Arduino Via BLYNK Apps. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hasni, Muhamad Ezmer Syazni (2017) Preferences Of Profile Design Product Using Kansei-Pairwise Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Hassan, Farahin (2017) Study Of Fiber Orientation Effect On Mechanical Properties Of Banana Pseudostem Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Idrus, Muhammad Nurfikri (2017) Analysis On Anti-Hunchback Device By Using Electromyography (EMG). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Isa, Fatin Aqillah (2017) Design Analysis Of A Circular Aluminum Crash Box For A Frontal Accident Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jaffri, Siti Julia Zulaika (2017) Design And Development Of Energy Harvester Device For The Application In Domestic Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamal, Mohd Faridz (2017) Mechanical Properties Of Components Fabricated Via Low Cost Additive Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kamil, Ahmad Ridhwan (2017) Development Of An Autonomous Robot For Inspection System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairuddin, Mohd Amirul Asyraf (2017) Implementation Of Incineration Technology For Municipal Solid Waste (MSW) Treatment And Disposal In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Kurmain, Muhammad Zuhri Zikirilah (2017) Testing Of Aircraft Composite Spoiler Hinges. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Latfi, Marwan Shafiq (2017) Design And Development Of Pineapple Leaf Cutter (PLC) Device In Pineapple Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mahor, Fauzi (2017) Automatic Cooling System Model Using Peltier Thermoelectric Cooler For Lightning Detection Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Mesri, Mohamad Izzat (2017) Analisis Keselesaan Termal Pada Ruang Peralihan Dalam Kawasan Bangunan Menggunakan Pendekatan Ujikaji. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mokhtar, Abdul Azim Waqiuddin (2017) Evaluation Of RON Fuels Performance In Malaysian Market. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Mohamad Nazim (2017) Effect Of Stannum On The Properties Of Graphite/Stannum/Polyproplene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Nur Haziratul Anis (2017) Factors Contributing To The Sustainability Of 5s' Program In Malaysia Hotel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazim, Nurul Shafnie (2017) GSM Based LPG Detector With Sound Alarm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Nizam, Mohd Syazwan (2017) Effect Of Direct Metal Deposition Of Stainless Steel 308 Lsi Wire On Stainless Steel 304 Base Plate. Project Report. UTeM, Melaka. (Submitted)

Mohd Nizam, Nurfarihah Natasha (2017) A Fiber Optic Sensor On Acidic Level Detection Using Beam-Through Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor, Ahmad Afifi (2017) Design And Analysis Of Chassis Frame For Educational Racing Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, Faza Syahirah (2017) Design And Development Of Dual-Band Antenna For WLAN Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Noor, Muhammad Firdaus (2017) Improvement Of Buoyancy For 12 Meter Double Hull Boat Using Virtual Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, Zuraida (2017) Development Of Vertical Milling Machine Educational Kit Using Various 3D Printing Methods To Assess Rapid Prototyping Process Capability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor, Afifah Raihana (2017) Preparation And Characterization Of PU-GNPs Nanocomposites Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor, Ahmad Nurdin Ikhwan (2017) Grounding Rod Design Evaluation For Residential Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azinan, Muhammad Afiq (2017) Air And Fuel Flow Analysis Inside The Internal Combustion Engine With Overhead Cam. Project Report. UTeM, Melaka. (Submitted)

Mohd Rabi, Mohammad Asra Quzzaimi (2017) Design Of A Loop Antenna For Lightning Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Radzi, Amira Shaqina (2017) Development Of Wireless Perimeter Fence Alarm System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Radzi, Nur Aiman Najwa (2017) Energy Harvesting Thermoelectric Power Generator From Human Body Under Different Conditions. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ramli, Nur Arif (2017) Development Of Semi-Automatic System For Underwater Remote Operated Vehicle (ROV) By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rashid, Fatin Farhana (2017) Design And Development Of Bandpass Filter Based On High Q Cavity Filter Structures For Microwave Imaging Technology. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Razali, Nur Atikah (2017) Effect Of Different Thermal Insulator Materials On Thermal Energy Storage (TES) Heat Loss. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ridzuan, Nur Haslinda (2017) An Analysis Of Harmonics Contribution Of Variable Frequency Drive In Power Distribution System. Project Report. UTeM, Melaka. (Submitted)

Mohd Rodzi, Haziqahtulsyahirah (2017) An Investigation Of Power Quality Issue In Campus Technology, UTeM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Rosdi, Nur Hidayah (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Corn Oil For Daily Usage Of Healthy Diet By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rudi, Mahirah (2017) The Factors That Affect The Customers Buying Intention Of Heritage Fabrics In Social Media. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Ruslan, Ros Dalila (2017) The Nose Shape Design Of Bullet Train Bio-Inspired Design To The Uniqueness Of The Snakehead Fish. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saad, Wira Hidayat and Mohd Saad, Norhashimah and Abd Latif, Mohd Juzaila and Abd Manap, Nurulfajar and Hasan Basari, Abd Samad and Ahmad Radzi, Syafeeza (2017) Rapid Reconstruction Technique Of Visual 3D Model Using Scaled Window Phase-Only Correlation (SWP-OC) On The Sequence Of Images Captured Surrounding The Object. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Sahet, Muhammad Afnan (2017) Development Of Rice Cleaner By Using Arduino Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saib, Khairul Anwar (2017) Design And Development Of Packaging Machine For Liquid Soap. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Saleh, Mohamad Tarmizi (2017) Impact Of Electrical Vehicle Charging On Distribution Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salikhin, Siti Syahirah (2017) Factors That Affecting Customer Purchase Intention At Hypermarket In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah, Azmeirul Azrie (2017) Finite Element Analysis Of Locally Manufactured Engine Mounting Components Under Cyclic Stresses And Thermal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrim, Mohammad Shah All-Hafiz (2017) Design And Development Of The Round Bar Motorize Jig For The Rotary Abrasive Water Jet (RAWJ) Process. Project Report. UTeM, Melaka. (Submitted)

Mohd Sharif, Faiz Farhan (2017) Design And Modelling A Single-Phase Grid-Connected Photovoltaic At Low Voltage Network And Its Performance Using PSCAD Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sharif, Nur Amanina (2017) The Effects Of Credit Card Towards Customer Spending Behavior. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Shobi, Asyraf Kasyidi (2017) Effect Of Bonding Agent On The Properties Of Pineapple Leaf Fibre Starch Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sobri, Ahmad Syazwan (2017) Ducting Design Studies Using Multimedia Platform For Educational Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Supinar, Mohd Habib (2017) Harvesting Of Waste Energy From 1.0 HP Air Conditioner In Production Of Free Hot Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Taib, Marsita (2017) Seminar Pemantapan Tadbir Urus Universiti Awam Kementerian Pengajian Tinggi. Jabatan Pendidikan Tinggi,Bahagian Governan IPTA,Putrajaya. (Submitted)

Mohd Tajuddin, Siti Seri Fatimah (2017) The Impact Of Smartphone Among Students That Influece The Lacks Of Concentrations In Malacca City. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Tarmizi, Muhammad Syafiq (2017) Design And Development Of Portable Pineapple Leaf Fibre Machnice In Pineapple Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yunus, Muhammad Hazim (2017) Characterization Of Fuel Additive For Fuel Saving And Injector Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Haziezol Helmi and Yahaya, Muhammad and Jumali, Mohd Hafizuddin and Kok, Swee Leong and Lau, Kok Tee and Abdul Rahman, Mohd Fauzi (2017) Performance Optimization On Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) Integrated Resonant Structure In Electrical Power Generation As A Green Energy Source. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Khairul Aqil (2017) Design Of Modular-Based Underwater Inspection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Mohd Zulfadli (2017) Modelling Of Coal Combustion In A Combustor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Siti Allyna (2017) Radial Line Slot Array Antenna Design With AMC Structure At 28 Ghz. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Yussof, Muhamad Firdaus (2017) Modelling Of Braking System On Series Hybrid Electric Vehicle Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zahid, Muhammad Nur Akif (2017) Development Of Intruders And Fire Alert At House Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zain, Mohd Amer Fazriel (2017) Prototype Of Water-Cooled Condenser Cooling System For Split Unit Air-Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zain, Muhammad Nadzmi (2017) Design And Simulation Of Millimeter Wave Filter For Next Generation (5G) RF Front-End Transceiver. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zaini, Noorfariza (2017) The Effectiveness Using Booster In Online Advertising Among New Online Sellers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaini, Norsolleha (2017) Investigation Of Wear Behaviour By Different Nanoparticles In Conventional Oil On The Ball Bearing Tested Using Extreme Pressure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Muhammad Farhan Zuhaili (2017) Development Of An Educational Quiz Kit That Test Student Knowledge On Control System's Second Order Transient Response By Using DC Motor Speed Control As Application (Transient Response Quiz Box). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki Fadzil, Siti Sarah (2017) Analysing SMEs Perspective Of Facebook As A Communication Medium That Affects Business Performance. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zali, Muhammad Fahmie Izuddin (2017) Potential Study And A Development Of Hybrid Solar Pico Hydro Power Harvesting For Urban And Rural Area. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zamani, Mohd Ziaulhadi (2017) Aerodynamic Effect Of Overhang On Turbulent Flow Field Within Two Dimensional Street Canyon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohammad Taufik (2017) Parametric Study On Hydronic Wall Cooling System Using Domestic Pipe As A Radiant System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zin, Noor Shahida (2017) The Influence Of Superior Leadership Styles,Employees Work Stress,And Organizational Commitment Toward Job Satisfaction At Melaka E & E Company. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulfekri, Nur Afifah (2017) The Relationship Between Transformational Leadership And Innovative Work Behaviour. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohd Zulkarnain, Fatin Syazana (2017) Design And Analysis For Development Of Bicycle Helmet Moulding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Ali, Luqmannurhakiem (2017) Investigation On Thermal Resistance Property Of Natural Hybridization Fibers (Oil Palm & Coconut) Through Conduction Concept Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Shuhada, Muhammad Khusyairi (2017) Development Of New Clamping Method For Waterjet Machine. Project Report. UTeM, Melaka. (Submitted)

Mohidin, Nur Amira (2017) An Investigation Of Acrylonitrile Butadiene Styrene (ABS) Impact Properties Subjected To Thermal Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohmad Bakhari, Muhammad Ashraf Wajdi (2017) Development Of Road Power Generation By Applying The Conversion System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohmad Nur, Nabiha (2017) Measurement Of Stress And Strain Of An Automotive Component Subjected To Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohmad Sidek, Intan Shafinaz (2017) Succession Planning In Family Business : A Study Of Family Entrepreneurial Teams In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohtar, Siti Hajar (2017) Factors Influencing Customer Purchase Intention Towards Halal Logo On Food Packaging In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mokhtar, Amir Rasyid (2017) Factors Influencing The Mobile Application Utilisation Among Generation Y. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokhtar, Muhammad Faiz (2017) Investigation Of Tool Wear And Surface Roughness When Machining AISI 1045 Using Alumina Ceramic Cutting Tool. Project Report. UTeM, Melaka. (Submitted)

Mokhtar, Nurhasyinaz (2017) Effect Of Equal Channel Angular Pressing On Microstructure And Mechanical Properties On Non Dendritic LM25 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mong, Guo Ren (2017) A Coupled Simulation Method For A Vortex-Induced Vibration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mooruthy, Ruban (2017) Design And Fabrication Of Automobile Blind Spot Detection System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad, Fatin Nasuha (2017) Automatic Plant Management System For Horticulture Using Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhamad Fadilah, Aqilah (2017) Development Of Cleaning Whiteboard System Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka. (Submitted)

Muhamad Nur Sadiq, Sazali (2017) An optimization of gate leakage in scaled MOSFET on the effect of temperature during the metal gate annealing process in Gate-Last Technology. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Afiq, Safardi (2017) Design and development of dual radio embedded software application stack for wireless mesh network based IoT system. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Ali, Nursyuhada Ismah (2017) Preparation And Characterization Of Banana Trunk Derived Nanocellulose Prepared By Acid Hydrolysis Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Hanafiah, Muhammad Hazimi (2017) Design Of Car Fuel Lid Cover Breaker For Safety Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Mahayudin, Nurrul Hikmah (2017) Modelling And Validation Of Ride Model For Utility Truck. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Shafiee, Ibrahim (2017) Smart auto-collect parcel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Syams Baskaran, Muhammad Sany (2017) Microcontroller Based Single Axis Solar Radiant Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusri, Mohd Yusoff (2017) Fiber optic sensor for soil humidity/moisture monitoring. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhd Salleh, Rohayu (2017) The Impact Of Information System (IS) Success Towards Employees’ Performance : A Case Study On Continental Tire Petaling Jaya, Selangor, Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Munjani, Ameen Nurzikri (2017) Ultra Thin Body 22nm SOI N-MOSFET (The Effect Of Sidewall Spacer Oxide Thickness To The Device Performance). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Ibrahim (2017) The Green Technology Usage Factors And SME's Business Performance In Selected Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Musa, Mohamad Dzumalin Faisal (2017) Performance Analysis Of Brass Sheet Under Vibration Impact Test By Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Zarina (2017) The Effects Of Viral Marketing On Consumer Responses Toward Cosmetic Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Amirul (2017) An Experimentel Study Of Laminated Rubber-Metal Spring On Axial Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Mohd Hafiz (2017) Design And Development Of Solar Toaster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Zaleha and Mohamad Juoi, Jariah and Othman, Radzali and Nam, Noor Akmar and Sheikh Md Fadzullah, Siti Hajar and Ishak, Nurfatiha (2017) Effect Of Polymeric Coating On The In-Vitro Degradation Of The Bioactive Tricalcium Phosphate Scaffold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustaffa, Norhidayah (2017) Acceptance Of SME Companies Towards Advanced Technology Of ICT In Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapa, Muhammad Aizat (2017) Experimental Investigation Of Thermal Performance Of Kenaf Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapa, Nur Amalia (2017) Development Of Portable Automatic Scoreboard For Sport Tournament Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapah, Siti Norashasya (2017) Consumers Behavioral Intention To Use Biodegradable Plastic Bags By Using Theory Of Planned Behaviour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapai, Munirahasmaa (2017) Optimization Of Fiber Optic Sensor In Detecting The Condition Of Palm Oil For SME Industry Usage By Using Factorial Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

N

Nabila, Kamarudin (2017) Ultra wide band antenna array design and development for medical application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nagendiren, Hashvini Dhewi (2017) Factors Influencing The Preferences Towards Online Fashion Purchase On Web 2.0 Among Generation-Y. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Najamhuri, Saiful Aizat (2017) Kesan Daripada Lokasi Getaran Berfrekuensi Rendah Untuk Mengesan Retak Dalam Kaedah Vibro-Akustik Taklinear. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasarudin, Faizun (2017) Improving Manufacturing Process Through Lean Implementation In Small Scale Manufacturing Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasri, Muhamad Khairul Nizam (2017) Thermal Stress Analysis On Formula Varsity (FV) Disc Brake Rotor By Using Finite Element Analysis (ANSYS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasrudin, Nur Fatihah (2017) The Optimization Of Welding Parameter For Joining Mild Steel 1020 Using ABB Metal Inerts Gas (MIG) Robot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nassharuddin, Mohamad Shafik (2017) Development Of An Embedded Cascading PID Controller Of DC Motor Using MATLAB-Simulink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nawawi, Mohamad Zainul Hakim (2017) Evaluation Of Sugarcane Bagasse As A Raw Material For Desalination. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazar Shah, Noramin (2017) Comparison Study Of 5 Axis Machine With Different Configuration Using CATIA Software. Project Report. UTeM, Melaka. (Submitted)

Nazari, Mohd Faiz (2017) Design,Analysis And Development Oil Palm Loose Fruits Collector Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazifunnur, Nur Aiman Syahmi (2017) Three-Dimensional Simulation On Racing Car Rear Wing With And Without Drag Reduction System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazri, Muhammad Safwan (2017) Developing Quails Egg Boiling & Peeling Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazri, Syamsul Bahrain (2017) Design And Development Sensor Based Electronics System Of Water Quality Detector. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nazri, Syarifuddin (2017) Development Of Monitoring System In OPerating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka. (Submitted)

Nazri, Syarifuddin (2017) Development Of Monitoring System In Operating Theater Using Arduino Ethernet Shield. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Neo, Chee Kian (2017) The Effectiveness Of Direct Marketing Through Online Medium In Retail Store Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Chin Sern (2017) Effect Of Wave Modulation Measured At Various Locations For Damage Detection Using Vibro-Acoustic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Heng Loong (2017) The Determinants Of Customer Acceptance Towards Using Mobile Banking Service In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Kong Eng (2017) Investigation On Compressor Blade’s Profile Performance By Using 3D CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Liaw Yong (2017) Development Of Small Volume Watering & Soil Cooling System By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, May Ling (2017) Reduction Of Yield Loss For Taping Process In Semiconductor Industry Using TRIZ. Project Report. UTeM, Melaka. (Submitted)

Ng, Shek Yi (2017) Design And Development Of Indoor Organic Eco-Smart Garden. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Simpson (2017) Development Of Remotely Operated Trash Cleaning Robot For River Cleaning Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Su Chen (2017) The Effect Of Entrepreneurial Competencies On Innovative Work Behaviour And The Moderating Role Of Organizational Climate Case Study Of Shopping Malls In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Wai Hoe (2017) Effects Of Process Parameters On Strength Of Polymer Lattice Structure Manufactured By Using 3D Printer. Project Report. UTeM, Melaka. (Submitted)

Ng, Wei Yu (2017) Design And Development Of Small Size Animatronics Robot Mechanical Construction. Project Report. UTeM, Melaka. (Submitted)

Ng, Xue Yan (2017) Development Of Active Steering Control Based On Sliding Mode Control With The Inclusion Of An Observer. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Yi Ling (2017) The Creators Intentions Influence Crowdfunding Performance As An Alternative Source Of Business Funding. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Yong Ann (2017) Arduino Based Locker System With Image Capture. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Yong Jie (2017) Design Of A Neural Network Based Fall Detection And Alert System. Project Report. UTeM, Melaka. (Submitted)

Ng, Yun Jiek (2017) High Gain Monopole Antenna For VHF And Microwave Interferometers. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ng, Zhen Quan (2017) Gamelan Bonang Electromagnetic Based High Torque Knocking Mechanism. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ngadiman, Nurul Natasha (2017) Experiment And Simulation Investigation On Air Breakdown In Uniform And Non-Uniform Field Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngahdiman, Adi Azri (2017) To Study The Concept Of Perpetual Motion On Ceiling Fan By Using Permanent Magnet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ngan, Albert Ban Chew (2017) Real Time Finger-Vein Recognition For Automatic Door Access Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ngan, Choon Wang (2017) Soft Starter Design For Single Phase AC Motor Using Microcontroller – Based Phase Angle Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Amri, Nik Ahmad Muslim (2017) Development High Gain Antenna For Off Grid Wireless Communication System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Azami, Nik Nazihah (2017) Development Of Assisted Global Navigation Satellite System (A-GNSS) Vehicle Tracking System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nik Ibrahim, Nik Nur Atira (2017) Medium Term Load Forecasting Using Statistical Feature Self Organizing Maps (SOM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Zakaria, Nur Izzati (2017) Factors Affecting Users’ Behavioural Intention Of Using Mobile Social Applications Among Young Generations At Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Noor Azam, Nurul Azlina (2017) The Influences Of Celebrity Endorsement Towards Customer Preferences On Beauty Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azman, Farah Norhasnani (2017) Investigation of vegetable oil based nanofluid in turning D2 steel. Project Report. UTeM, Melaka. (Submitted)

Noor Azman, Muhammad Akmal (2017) Development Of Fiber Optic Liquid Sensor On Liquid Paracetamol Concentration Detection For Pharmaceutical Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azman, Nursyakirah (2017) Determinants Of Characteristics Towards Sociopreneurship Acculturation To Improve Local Society In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Azlan, Nur Atikah (2017) Multivariable PID Controller Design Tuning Using Optimization Technique For Activated Sludge Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zamri, Nur Ridha Rifaie (2017) Simulation Of Sprocket By Using Different Tool Paths Process In CAD/CAM Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norashid, Norjannahtul Ainah (2017) Buckling Behaviour And Instability Of Tapered Column Made Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norddin, Iman Nur Ezzati (2017) Factors Influencing Generation Y’s Online Purchase Intention Of Cosmetic Products In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norddin, Nur Khairiyyah (2017) Analyze The Performance Of 16nm Double Gate Finfet Device Using Silvaco TCAD Tool. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Eezsafauzia Azalin (2017) Redesign Of UTeM Cafeteria Workstation For Work Posture Improvement Utilising Ergonimics Simulation Software. Technical Report. UTeM, Melaka. (Submitted)

Nordin, Mohd Faizz (2017) Antiroll Suspension System For Sport Utility Vehicles. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nordin, Mohd Najmi Naim (2017) Polymer Composite Coating Performance Evaluation On Carbon Steel In Mixed Brine Solution. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nordin, Mohd Nur Azmi and Mustafa, Zaleha and Omar, Ghazali and Sheikh Md Fadzullah, Siti Hajar and Mansor, Muhd Ridzuan and Md Isa, Mohamed Hafiz and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Jumaidi, Muhammad Taufiq (2017) Cost Effective Eco-Friendly WPCs Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfadzlon, Mohd Farid Hakim (2017) Design And Development Of Yamaha Y15ZR Frame Slider (Carbon Steel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhan, Mohamad Zul Hafiq (2017) Development Of Diode Clamped Multilevel Inverter Base On PWM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norizan, An'nisa (2017) Standard Minimum Thickness Of A Commercial Available Polypropylene And Polycarbonate Of A Name Card Holder. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Norzaidi, Nabil Idraki Izzat (2017) Characteristics Of Unit Trust Investment : Effect Towards Customers' Investing Perspectives. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfarahin Raihanah, Abd Razak (2017) Express Breast Milk (EBM) Checker. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Afifa Adhwa, Zainal Abidin (2017) Automatic toilet system using Arduino platform. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Ezati Aida, Amsah (2017) Ischemic stroke classification using machine learning technique based on 3D MRI data. Project Report. UTeM, Melaka,Malaysia. (Submitted)

O

Oh, Zhew Kim (2017) Self-Powered Vehicle Braking Monitoring System Using Thermoelectric Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Oh, Zi Xin (2017) Development Of Emergency Wireless Communication System By Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Omar, Abdullah (2017) A Study To Design And Fabricate A Prototype Of Driver Drowsiness Preventer (DDP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Mohammad Zulkurnain (2017) E-Logic Trainer Kit : Development Of An Electronic Educational Simulator And Quiz Kit For Logic Gate Combinational Circuit By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Muhammad Asnawi (2017) Experimental Study On The Effect Of Intake Air Temperature On The Performance Of Spark Ignition Engine Fueled With Hydrogen Peroxide Blended With Gasoline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Muhammad Faidhllah (2017) Fabricate The Body Of The Agriculture Smart Mover. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Omar, Nurul Shafiqah (2017) Performance Analysis Of Oil Skimmer For Grease Trap System To Shorten The Retention Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Zulfahmi (2017) Development Of A Prototype Of Portable 5V Battery Charging System Using Wind Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Beng Tai (2017) Load Shedding Scheme For Radial Distribution System. Technical Report. UTeM, Melaka. (Submitted)

Ong, Ee Wong (2017) Development Of Sorting System Based On Colour Segregation Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Ling Mei (2017) The Study Of Service Quality Towards Customer Satisfaction Among Express Bus For Melaka – Kuala Lumpur Route. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Qiao Yuan (2017) Design, Optimization And Development Of Phyllotaxis Pattern Solar Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Wan Ying (2017) The Uber Service Towards Customer Perception In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ong, Xin Yi (2017) The Impact Of Economic Situation On Household Buying Behaviour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Xiong Hui (2017) The Saw Dust Filled Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Onn, Azizi Arif (2017) Optimization And Analyze Of Fixable Clamping Jig For Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooh, Man Chun (2017) Integrated Sensor For Unmanned Underwater Vehicle (UUV). Technical Report. UTeM, Melaka. (Submitted)

Ooi, Jian Ping (2017) Switching Circuit Design For Linear Bi-Statics Ultra Wideband (UWB) Antenna In Microwave Bone Imaging Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ooi, Soon Fatt (2017) The Customer Perceptions On Purchase Behavior Of Malaysia Convenience Store. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ooi, Zhu Oon (2017) Design And Development Of A Mechanism To Determine Wheeler Self-Propelling For Rehabilitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Osman, Akhmal Firdaus (2017) Investigation Of Flame Stabilization In Counter Current Micro Combustors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Osman, Nur Natasha (2017) Analysis On Voltage Generation And Thermal Gradient Of Car Waste Heat Using Thermoelectric Generator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Osman, Nurul Atikah (2017) Textile Wearable Printed Loop Antenna. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Osnan Najib, Muhamad Fahrul Razzi (2017) The Development Of Bioplastic Product From Banana Fiber For Food Packaging. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Othaman, Anis Nabihan (2017) Formulation Of Polymeric Binder System In Urea Fertilizer Containing Biodegradable PVA And Starch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Aimanezmir (2017) Optimization On The Nanoparticle Stability In Liquid Phased Condition By Using Taguchi Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Nur Ainina Izzati (2017) Optimization Of Rotary Ultrasonic Assisted Milling For Graphite Material. Technical Report. UTeM, Melaka. (Submitted)

Otsman, Muhammad (2017) Tribological Properties Modification Of Zinc Diprimary Octyl Induced Palm Oil Bio-Lubricant Using Molybdenum Dithiophosphate. Project Report. UTeM, Melaka. (Submitted)

P

Pakhrazi, Mohamad Ainudin Kamel (2017) Waste Heat Recovery From Exhaust Gas Using Steam Turbine Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pan, Carol Zi Ting (2017) Propose New Dust Suction System To Solve The Malfunctioning Of Existing System In The Trim Booth At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pellipus, Christina (2017) Controlling Home Appliances By Using Bluetooth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Penerbit, Universiti Malaysia Kelantan (2017) Seminar Pengurusan Asrama Peringkat kebangsaan (SPARK) 2017. UMK, Kelantan, Malaysia. (Submitted)

Phang, Advin Kok Seng (2017) Optimization Of Bio Active Porous Poly (Lactic Acid) Scaffold For Biomedical Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pilvamangalam, Nisallini (2017) A Study On Quasi Static Indentation Behaviour Of Kenaf Bast Fibre Reinforced Metal Laminate System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Podang, Muhammad Syukri (2017) The Investigation On The Improvement Of Cooling Load Calculation At Air Distribution Laboratories In Factory 1 (FTK). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pua, Chee Jian (2017) Human Foot Step Impact Based Interactive Flooring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Pua, Zhen Ying (2017) Design and development of IoT enabled bio-signal collection system for wheeler rehabilitation fitness assesment. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Puvanen Thiran, Logantiraan (2017) Improvement Of Diamond Antenna Dish Based On Comparison Method Between Scanning Part, Actual CAD Data And Fabrication Process. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

R

Rafi'i, Nurul Atiqah (2017) Analysis On The Effect Of Inter-Cell Interefence In LTE By Using Matlab. Project Report. UTeM, Melaka. (Submitted)

Rahamat, Muhamad Yazid (2017) Development Of Assistive Robot Using Ultrasonic Sensor For Indoor Navigation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raharja, Alvin Hadiyan (2017) Development of standard time in repacking operation. Project Report. UTeM, Melaka. (Submitted)

Rahim, Masitah (2017) Effect Of Palm Oil Trunk Dust To Polyurethane Noise Reduction Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahim, Norhuzaifi (2017) Experimental Investigation Of Energy Absorption Capacity Of Mild Steel Cylinder Subjected To Axial Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahim, Sariah (2017) Intelligent Lighting System For Domestic Environment. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rahiman, Nur'Ain (2017) Design And Development Of Pineapple Leaf Fibre Extraction Machine. Project Report. UTeM, Melaka. (Submitted)

Rahimi, Nur Afifah (2017) Resting-State EEG Current Source-Density Of Neural Oscillations:A Gender Comparison Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raja Dziauddin, Raja Mohd Fazrin (2017) Design Of Automatic Fixture For Scantool Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Izam, Raja Izzi Azrul (2017) Design Of Nonlinear PID With Integration Of Tracking Differentiator (TD) Module For Tracking Performance Of Machine Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Othman, Raja Nor Firdaus Kashfi and Misron, Norhisam and Abdul Karim, Kasrul and Jidin, Auzani (2017) Study And Experimental Verification Of Motor-Generator Mode In Double Stator Slotted Rotor Permanent Magnet Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajah, Neerosha (2017) The Effect Of Intrapreneurial Competencies On Innovative Work Behavior And The Moderating Role Of Human Resource Development : A Case Study At UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramalingam, Thineskumar (2017) Investigation Of Energy Absorption Capacity Of Mild Steel Cylinder Subjected To Lateral Crushing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramat, Muhammad Fikri (2017) Development Of Automatic Body Cleaning System For Pet Via Internet Of Things (IoT). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramdzan, Amira Husna (2017) Effectiveness Of Green Innovation Towards Business Performance In Selected Manufacturing Industries. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramlan, Muhammad Saifulazwan (2017) Study On Desalination Of Seawater By Water Hyacinth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramlan, Roszaidi and Muhammad, Nor Salim and Kok, Swee Leong and Putra, Azma and Jenal, Rustamreen and Zakaria, Nazri Huzaimi and Low, Pei Sing (2017) Effects Of Stiffness Non-Linearity On The Electromechanical Coupling Of A Vibration Based Energy Harvesting Device. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Abdul Muiz (2017) Design Of Linear Conveyor For Parts Feeding To Senes Articulated Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Ahmad Syukran (2017) Effect Of Water Mist In Spark Ignition Engine Toward Exhaust Gas Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Amirul Azaly (2017) Study On The Implementation Of Parabolic Dish Based On Concentrated Solar Power Under Malaysia Environment- (Direct Normal Irradiance). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Azri Izzati (2017) Space Mapping Of Hip And Hand Wrists Motions For Manual Material Handling Workstation Design (A Malaysian Case Study). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Herman (2017) Factors Influencing Consumer Perception On Buying IT Products Among Utem Students. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramli, Mohamad Syafiq Husni (2017) Analysis Of Pressure Transient In Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Nur Farhanah (2017) Smart Motorcycle Security And Tracking Using Arduino And Android. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ramsah, Mohammad Zulfadhli (2017) Develop And Design Portable Mini Turbine And Solar Source for Outdoor Usage. Project Report. UTeM, Melaka. (Submitted)

Ramzuzzaman, Nurain Fasihah (2017) Analyzing The Adoption Factors Towards Behaviour Intention To Use Service Innovation Technology In Restaurant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rasid, Farah Amirah (2017) The Investigation Of Circular Path Generation And Hand Motion Tracking Problem Using 5DOF Vision Based Robot. Project Report. UTeM, Melaka. (Submitted)

Rasiman, Nadia Ilysa (2017) Improving The Accuracy Of Open Source 3D Scanning Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rasmi, Noramalina (2017) Preparation And Characterization Of Polyurethane Filled Waste Tyre Dust (PU-WTD) Composite Foam For Noise Absorption Medium. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rasyid Dahlan, Muhammad Amirul (2017) Design Of Complementary Frequency Selective Surface On Glass Design For Wireless Communication Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Raya, Muhammad Ariffin (2017) Kesan Penggelekan Dan Rawatan Haba Pada Keluli Tahan Karat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razak, Muhd Khairul Razin (2017) Determinants That Influence The Intention To Use Mobile Payment Among Gen-Y In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Razali, Muhamad Farid (2017) Effect Of Layer Thickness And Raster Angle On Tensile Properties Of Carbon Fiber Reinforced ABS Printed Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Muhammad Fitri (2017) Vibration Isolation Of A Rotating Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razlan, Anmar Sarhan (2017) Field Oriented Control Of Five-Phase Induction Motor Speed Drive Using DSpace And Matlab/Simulink. Project Report. UTeM, Melaka. (Submitted)

Revindran, Sathiyasuruban (2017) Development Of Stand-Alone Solar System For Under-Development Area. Project Report. UTeM, Melaka. (Submitted)

Ridzuan, Ibrahim (2017) Thermal Comfort And Dust Concentration Level Analysis Of Air-Conditioned Lecture Rooms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rizalman, Nur Farhana Intan Suhaila (2017) Development Of Foreign Material In Food Detection Sensor Using Resistance Concept. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rodzi, Zarul Idzuddin (2017) The Effect Celebrity Endorsement On Consumer Behavioural Intention Among Youth In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rojani, Mohd Syahmi (2017) Structural Design And Analysis Of Main Tank For River Trash Collector System (RTCS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rollan Afendy, Zahin Wazini (2017) Solar Hybrid Power System Model Using Arduino With A Smart Control And Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Romeli, Muhamad Hakimi (2017) Design And Development Portable Water Saving For Ablution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosdani, Nurul Fatin (2017) Microcontroller-Based Voltage And Current Stability Controller For Domestic Application. Project Report. UTeM, Melaka. (Submitted)

Rosdi, Siti Nor Farhana (2017) Factors That Influence Women Acceptance On Beauty Industry In Peninsular Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Fauzei (2017) Topological Optimization In 3D Printing Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Muhammad Haziq Ilham (2017) The Investigation Of Lightweight Brick Made From Rice Husk. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Roslan, Nur Amierah (2017) Determinant Of Entrepreneurial Intention Among Business Student In Public Institution At Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nurul Najwa (2017) Investigation Of Heat Flow Characteristic In An Industril Oven Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Suria (2017) Factor Affecting Communication Barrier Towards The Performance Of Employee In Tenaga Nasional Berhad (TNB), Temerloh, Pahang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Amarul Afiq Adli (2017) Analysis Of Engine Power Using 3 Types Of Pre-Combustion Chamber's Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Amirul Imran (2017) Factors Influencing Green Initiatives Adoption In Manufacturing Company At Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Azri Dinnie (2017) Experimental Study On The Effect Of Slat To Aerodynamics Performance Of An Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Fatin Suhana (2017) Determinant Factors Of e-Commerce Adoption Among Malaysia Tourism Small And Medium-Sized Enterprises (TSMEs). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Muhammad Akmal (2017) Development Of Unmanned Aerial Vehicle (Portable Version). Project Report. UTeM, Melaka. (Submitted)

Rosli, Muhammad Tirmidzi Al Bakri (2017) Design, Analysis And Development Of Tennis Court Dryer Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Noor Nabila Natasya (2017) Study The Influnce Of Aceton To Improve Surface Finish Of 3D Printed Part For ABS And PLA Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nornarieyza (2017) Layer Adhesion Investigation Of 3D Printer Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nur Atiqah (2017) Entrepreneurial Education And Its Impact Towards Entrepreneurial Intention Among Student In Malaysian Engineering University. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Nursolehah (2017) Optimization Of Biodiesel Fuel Using Edible Vegetable Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Siti Najihah (2017) Tensile Behavior Study Of Polypropylene At Different ASH Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslin, Nur Izzati Syahira (2017) An Integration Of Market Orientation On Business Performance Towards Malaysian Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosly, Muhammad Safwan (2017) Blending Of ZDDP And MoDTP Into Corn Oil As Tribological Properties Improvers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Muhammad Qamarul Arifin (2017) Development Of Automatic Fire Extinguisher System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosman, Norhani (2017) Optimization Of The Fixed Channel Model In Channel Assignment Problem Using Simulated Annealing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosmi, Nur Shahira (2017) The Development Of Automatic Switch Using Microcontroller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosnan, Nur Syahirah (2017) Preparation And Characterization Of Cellulose Nanocrystals (CNC) From Kenaf Fiber Via Acid Hydrolysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozeman, Muhammad Hizral Tazreef (2017) Design And Development Of Battery-Less Electronic Floor Based On Human Foot Step Impact Force. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rozita, Abidin (2017) Smart waste management system. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rozman, Amirul Dzakiyy (2017) Design Of Electrical Circuit Of Electronic Fuel Injector Tester For Education Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusdi, Muhammad Syamil (2017) Design And Analysis Of Industrial Security Door. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruslan, Nurul Farzlina (2017) Material Selection Of Natural Fiber Metal Laminate For Automotive Body Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusli, Ahmad Adib (2017) Development Of Coin Collector Notification System Using GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rusli, Nur Alia (2017) Assessment On The Impact Of Distributed Generation (Renewable Energy) Penetration To The National Grid Protection System Performance Using Eracs Software. Project Report. UTeM, Melaka. (Submitted)

Rusli, Nurin Irwanie (2017) Analyse Of Process Parameter Variation In Grraphene Field-Effect Transistor (GFET) Device Using L9 OA Taguchi Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rusni, Muhammad Firdaus (2017) The Development Of Power Generation Roof Ventilator For Emergency Light. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

S

S.Chinniah, Eswaran (2017) Comparative Study Between 3D Scanner,Vernier Calliper,And Coordinate Measurement Machine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saad, Shafri (2017) Surge Protection Device (SPD) Effect Of Different Design Of Grounding System. Technical Report. UTeM, Melaka. (Submitted)

Saadon, Adiba Soliha (2017) Microstrip Array Antenna Design With EBS Structure At 28 Ghz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saadon, Nuremily Ashikin (2017) The Impact Of Digital Marketing On Consumer Buying Behavior Towards Cosmetic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saari, Mohamad Fikri Salehudin (2017) Comparison Between Tensile Properties And Fatigue Behaviour Of NR-EPDM Blend And Its Nanocomposites For Potential Application In Engine Mounting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saaya, Zurina and Basiron, Halizah and Zakaria, Mohd Hafiz and Abdul Rahman, Ahmad Fadzli Nizam and Hassim, Nurulhalim (2017) Lexical Based Approach For Analysing Sentiments In Malay Language On Social Media Platforms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safii, Zuhair Afandi (2017) Electrospun Nanofiber Water Filtration Media For Removing Suspended Solid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safrizal, Said Hanafi (2017) Influence Of Gear Shifting Pattern On Vehicle Performance. Project Report. UTeM, Melaka. (Submitted)

Saharuddin, Muhammad Zariq Izwan (2017) Developing Recycling Machine For Botlle Plastic With Reward By Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sahib, Shahrin (2017) The 5th International Conference And Exhibition On Sustainabile Energy And Advanced Material, ICE-SEAM 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Anugerah Akademik Universiti 2016. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Anugerah Bakti Dan Kecemerlangan Pelajar UTeM 2016 Dan Anugerah Sukan UTeM 2016 (MASUTeM). [NC Speech] (Submitted)

Sahib, Shahrin (2017) CeO Talk Perodua. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Chancellor‘s Talk 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) CompTIA CSA+ Certification Launching. [NC Speech] (Submitted)

Sahib, Shahrin (2017) FPTT Day 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) International Symposium On Research In Innovation And Sustainablity 2017 (ISORIS’17). [NC Speech] (Submitted)

Sahib, Shahrin (2017) Karnival Kemukjuzaran Al-Quran Peringkat Kebangsaan 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Lean Six Sigma. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majis Perhimpunan 1UTeM Bil. 3/2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Hi-Tea Kumpulan Inovatif Dan Kreatif (KIK) Ke Peringkat Antarabangsa Bersama Pengurusan Universiti Dan Jawatankuasa Pemandu KIK UTeM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Homecoming Alumni UTeM 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Iftar Bersama TYT Tun Datuk Seri Utama Mohd Khalil Bin Yaakob Canselor UTeM 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Mahabbah Eidulfitri 1438H. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Menandatangani IBR Dan CIP UTeM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penghargaan Pesara Kontrak. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penghargaan Petugas Hari Keluarga UTeM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penutup Bengkel Pengenalan Dan Persediaan Pelaksanaan Penarafan QS Di UTeM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penutup Dan Penyampaian Hadiah Kejohanan Sukan Antara Fakulti Kali Ke-12 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penutup Konvensyen Kumpulan Inovatif Dan Kreatif (KIK) Universiti Teknikal Malaysia Melaka Kali Ke-3. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penutup Program Mechanical Engineering Week 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penyerahan Rasmi Laman Web Persatuan Polis Bantuan Malaysia (APA). [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Penyerahan Watikah Pelantikan Majlis Perwakilan Pelajar (MPP) Universiti Teknikal Malaysia Melaka (UTeM) Sesi 2017-2018. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perasmian Forum Patriotisme Memperkukuhkan Benteng Pemikiran Dan Budaya Semangat Jati Diri Generasi Muda Negara. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perasmian Makmal Satelit Projek “Coordinated Malware Eradication And Remediation”. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perasmian Minggu Haluan Siswa 2017-2018. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perasmian Penutup Mechanical Engineering Research Day 2017 (MERD’17). [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perasmian Penutup Sambutan Minggu Alam Sekitar 2017 (MAS 2017) Universiti Teknikal Malaysia Melaka. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perasmian Pesta Konvokesyen UTeM Ke-13 Universiti Teknikal Malaysia Melaka (UTeM). [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perasmian Pusat e-Pembelajaran Negara (NeLC) Bersempena Karnival e-Pembelajaran UTeM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perutusan Naib Canselor 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Sumbangan Bahan ‘Keep A Book Alive’ Perpustakaan Laman Hikmah. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Malam Penghargaan Bersama Media 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) MoA Signing Ceremony Between UTeM And Industry Partners. [NC Speech] (Submitted)

Sahib, Shahrin (2017) MoA UTeM – Rakan Industri. [NC Speech] (Submitted)

Sahib, Shahrin (2017) MoU Jakim (Darul Quran) - UTeM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) MoU Signing And Closing Ceremony Of Infineon Week@UTeM 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) MoU Signing Ceremony Between UTeM And SAMSUNG SDI Energy Malaysia Sdn. Bhd. [NC Speech] (Submitted)

Sahib, Shahrin (2017) MoU UTeM Dan KUIM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Pelancaran Hari Sukan Negara Peringkat UTeM 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Perasmian Karnival FTMK 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Program Inovasi UTeM Bersama PDRM Melaka. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Program Jom Meriah FTK 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Program Kesukarelawanan Voulenteer To Institution (V2I) Jabatan Kebajikan Masyarakat Bersama UTeM. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Program Perundangan Dan Integriti. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Program Sambutan Hari Malaysia. [NC Speech] (Submitted)

Sahib, Shahrin (2017) SME Roundtable 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Sempena Majlis Jasamu Dikenang 2017. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Taklimat CIP. [NC Speech] (Submitted)

Sahib, Shahrin (2017) University Innovation Fun Day With Airbus In Malaysia. [NC Speech] (Submitted)

Sahib, Shahrin (2017) Majlis Perhimpunan 1UTeM Bil.1/2017. [NC Speech] (Submitted)

Saidin, Nur Hidayah (2017) Application Of Palm Oil Fiber-PP Composite For Fabrication On Interior Part Of Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidon, Amirul Arief (2017) Electronic Throttle Body Tuning Using Model Reference Adaptive Control PID. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sakthiya Moorthy, Rutrish (2017) Study On Heat Exchanger For Steam Generator From Waste Heat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salekan, Nuramirah (2017) The Successful Factor Of Johor Traditional Food Entreprenuer Toward SMEs Product : An Empirical Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salim, Nur Anis Suraya (2017) Development Of Energy Regenerative System From Air Conditioner Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Khairul Ikhwan (2017) Automatic Vehicle Recognition Using Morphological And Template Matching Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Muhammad Izzat (2017) Fabrication Of Braking System For The Palm Oil Plantation Agriculture Smart Mover Through Analytical Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Muhammad Rafiuddin (2017) Design Of The Brake System For Agriculture Smart Mover By Using Total Design Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Samsudin, Muhammad Syazwan Nizam (2017) Effect Of Silane Based Functionalization On Thermal And Electrical Properties Of Nanographene-Nylon 6,6 Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Shahrizal (2017) Effect Of Suspension's Ionic Conductivity On Electrophoretic Deposition Of h-BN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sani, Mohamad Safei (2017) Wear Behaviour Of 3D Printed Part Of Carbon Fibre Reinforced ABS Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sani, Muhammad Nurshahmin (2017) Design And Development Of Vertical Axis Wind Turbine For Electrical Power Generation Specific Use In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Santa, Mohamad Noriman (2017) Human-Robot Interaction (HRI) For Rehabilitation Patients With An Animal Robot Using Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saparuddin, Hasan (2017) Effect Of Spot Weld Tip To The Welding Characteristic Of Dissimilar Resistance Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapingai, Mohamad Azywan (2017) Development Of Auto Log Sheet Switch For Energy Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sarputdin, Ahmad Syafiq (2017) The Development And Analyse Of Cooling System For Motorcycle Helmet. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saruji, Nur Safweda (2017) Elevator Door Mechanism Control System Improvement Using Arduino Uno. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sawari, Nur Adilah (2017) Optimizing The 3D Milling Machine Parameter To Improve The Cutting Accuracy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sayoti, Yuszaili (2017) Design Of Transport Trailer For Fire Fighting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazali, Muhammad Hilmi (2017) Effect Of Rear Spoiler Inclination Angle On The Aerodynamic Performance Of Hatchback Model By Wind Tunnel. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Seah, Boon York (2017) FPGA-Based Lightning Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

See, Toh Chun Sing (2017) Development Of Remotely Operated Underwater Crawler Robot For Underwater Inspection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Selamat, Siti Khotijah (2017) Development Of Solar Tracker Using Microcontroller To Control Stepper Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sem, Epoi Laeng (2017) Evaluation Of Decentralised Fans Effectiveness In Office Building Ventilation System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ser, Wendy Ze Xian (2017) Design And Development Of Fluid Density Determination Based On Piezoelectric Coupling Sensors. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sezeli, Shaiful Syahmi (2017) Readiness For Crowdfunding As An Alternative Way To Finance SME In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shaari Omar, Mohamad Shukri Faiz (2017) Modelling And Validation Of Ride Model Commercial Vehicle. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shafi'e, Muhammad Yusri (2017) Tool Performance Of Uncoated Tungsten Carbide Insert During Turning Ti-6AI-4V Under Dry And Nanofluid Condition. Project Report. UTeM, Melaka. (Submitted)

Shafie, Azhar (2017) Implementation Of Automation Process In Generating CAD Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaharani, Muhammad Syamil (2017) Nanofibre Incoprated Face Mask For Haze Protection Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaharuddin, Syafiqah (2017) The Effect Of Lean Production Toward Company Performance Is Noodle SME's Company In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahid Ahmed, Sharifah Nurul Atikah (2017) Fire Alert System Via IoT. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahli, Nur Amalina (2017) Development Of Alert Notification Of Indoor Air Quality Level Using GSM System. Project Report. UTeM, Melaka. (Submitted)

Shahril, Mohammad Rais (2017) Development Of Intelligence Automated Air Ventilation System Using Arduino. Technical Report. UTeM, Melaka. (Submitted)

Shahril, Nuraishah (2017) The Consumers Acceptance Towards Green Food Packaging Technology In Melaka Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrom, Mohamad Nur Haqkim (2017) The Effectiveness Of ISO 31000 Implementation In Manufacturing Industries In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shahron, Alif Hamizan (2017) Design And Fabrication Of Electrospinning Machine Cabinet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrum Amlee, Syuhadatul Nadia (2017) Preparation And Characterization Of Polyurethane Filled Bentonite Composites Foams. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsuddin, Nurul Shahira (2017) Surface Integrity Of Tool Steel AISI D2 Produced By Dry CNC Turning. Project Report. UTeM, Melaka. (Submitted)

Shamsudin, Nur Hazahsha (2017) A New Harmonic Signal Analysis Technique For Automated Source Detection And Identification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsul Ariffin, Anis Atthirrah (2017) Development Of Mobile Robot For Solving Maze Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shamsul Nizam, Nur Amira (2017) Surface Fracture Mode Analysis Of FRP Composite Pipe By Microscopic Technique. Project Report. UTeM, Melaka. (Submitted)

Shamsuri, Muhammad Hamizan (2017) Development Of Smart Temperature Monitoring System Using Ubidots. Project Report. UTeM, Melaka. (Submitted)

Shamsuri, Nurizrin Shazmira (2017) A Diagnostic Of Harmonic Source Signature Recognition In Power Distribution System By Using Periodogram. Project Report. UTeM, Melaka. (Submitted)

Shamsusah, Haqeem Shah Firdaus (2017) Assessment On Indoor Air Quality Analysis In Portable Cabin And Traditional Building Classroom. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shanmugam, Shopana (2017) Technology Utilization Factors Of Food Manufacturing In Small And Medium Enterprise (SME). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shapri, Siti Nur Shahira (2017) Development Of Wearable Miniaturized Antenna For WLAN Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sharif, Mohamad Shafiq (2017) The Effectiveness Of Online Advertising To Enhance Promotional Strategy In SME Service Sector,Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shawal, Nur Shuhada (2017) Preparation And Characterization Of Polyol Using Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shibghatullah, Abdul Samad and Abal Abas, Zuraida and Mohamed Aminuddin, Mai Mariam and Asmai, Siti Azirah and Basiron, Halizah and Mustaffa, Izadora and Abdul Rahman, Ahmad Fadzli Nizam and Mansor, Nur Farraliza (2017) Enhanced Harmony Search Algorithm For Better Decision Tree Classification Of Huge Medical Data. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shikh Maidin, Muhammad Ammar (2017) GPSajadah. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Shukri, Izzah Atirah (2017) Development Of Microstrip Solar-Patch Antenna For Wireless Radio Communications. Project Report. UTeM, Melaka. (Submitted)

Sim, Jing En (2017) Factors Affecting Brand Switching Among Mobile Service Users Of UTeM Students. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Soh, May Ling (2017) Development Of Mass Detection Module For Low-Cost Sport Court Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sohimeh, Shahirul Ashraf (2017) Development Of Remote Controlled Mobile Robot Through Wi-Fi Or IoT Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soong, Chee Ching (2017) A Voltage Based SPWM Technique On A New Approach For Multilevel Inverter. Project Report. UTeM, Melaka. (Submitted)

Suboh, Sazmi (2017) Conceptual Design For Drying Fabrics Using Waste Heat From Air Conditioning Condenser. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Subramaniam, Arvind Veloo (2017) Design And Develop Manually Operated Machine For The Preparation Of Plastering Mortars By Using Waste Papers. Project Report. UTeM, Melaka. (Submitted)

Sudin, Ainul Athirah (2017) Factor Influencing Customer Satisfaction Towards Service Efficiency At Syarikat Air Terengganu. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sudirman, Dina Zulaikha (2017) Development Of Vision-Based System For Product Classification. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Suhaimi, Muhammad Amir Afiq (2017) Investigation Of Sitting Posture In Classroom Environment. Project Report. UTeM, Melaka. (Submitted)

Suhaimi, Nur Adila Shaffini (2017) Selection Of Conveyor System Using Fuzzy Analytical Hierarchy Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhamey, Nurmazila (2017) Resting State EEG Current Source Density Of Neural Oscillation:A Comparison Between Schizophrenia Patients And Healthy Controls. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Sukri, Syazwan (2017) Development Of Volatile Organic Compounds (VOC) Removal Filter Prototype For Transport Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaima, Mohamad Fani and Salam, Zainal and Gan, Chin Kim and Baharin, Kyairul Azmi and Lau, Cheiw Yun (2017) Investigation On Cloud Passing To Grid-Connected Photovoltaic Systems (GCPV) On The Power Network Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sumed, Mohd Azrie (2017) Design A Wind Ventilator Turbine For Domestic Application Using ANSYS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suraiza, Mohd Yasin (2017) Characterization of polysilicon vs metal gate electrodes in 19 nm NMOS device. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Suren, Gnanasegaran (2017) The development of wireless power transfer technologies for mobile charging in vehicles using inductive approach. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Suresh, Tanesh Nair (2017) Development Of Patient Training System Using Image Processing Technique. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Abdul Kadir, Syed Abdul Khaliq (2017) Optimal Wastewater Treatment Plant By PID Controller. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Ahmad, Sharifah Sakinah and KAMALRUDDIN, MASSILA and Abdullah, Noraswaliza (2017) Fuzzy Modeling Approach In Requirement Consistency Validation For Better Quality Software Requirement. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Idris, Syed Muhammad Al-Amin (2017) Fabrication Of Complete Denture Via 3D Printing Technology With Reverse Engineering Method. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Syed Mohd Fadzil, Sharifah Nurul Jannah (2017) Development Of Electronic Component Rack System By Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Syamsudin, Abdul Hakim (2017) Balancing Equipment For High RPM Pulley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

Taharim, Nor Najwa (2017) Quality Improvement In Manufacturing Industry By Using DMAIC Approach. Project Report. UTeM, Melaka. (Submitted)

Tallip, Juriyanna (2017) Optimization Of Tribological Performance For Filtration Waste Cooking Oil Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tam, Yee Ken (2017) The Factors That Influencing Consumer Preference To Visit Shopping Mall In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tamaldin, Noreffendy and Rosley, Mohammad Nazry and Abdollah, Mohd Fadzli and Ramlan, Roszaidi and Mohamed Arifin, Yusmady and Amiruddin, Hilmi and Mat Nuri@Md Din, Nur Rashid (2017) Engine Performance And Emission Characteristics Of Hydrogen Enrichment In Light Duty Diesel Engine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tamat, Mohamad Naim (2017) Development Of Internal Pipe System Inspection Mechanism. Technical Report. UTeM, Melaka. (Submitted)

Tan, Bee Ying (2017) Fast Moving Consumer Goods Brand Extension Impact On Customer Perception In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Chee Fai and Khalil, Siti Nurhaida and Said, Md Radzai (2017) Survey On Malaysian Seating Comfort During Travel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chong Wei (2017) Energy Scvenging For Mobile And Wireless Devices Using CMOS Rectifier Circuit. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Dion Piu Sern (2017) Design And Development Of A Wearable Thermoelectric Generator Armband To Power Up Low Power Electronic Devices. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Hui Hui (2017) Factors Affecting Entrepreneurial Intention Among Final Year Students Of UTeM And UiTM Located Melaka City. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Kah Yin (2017) Investigation On The Effects Of Human Weight On Intervertebral Disc At Human Lumbar Spine Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Lin Nah and Chander, Shailesh and Sham, Iskandar and Munusamy, Hari Ramulu and Williams, Geoffrey and Othman, Yacoob (2017) Higher Education Strategic Financial Management Conference 2017. Malaysia Institute Of Accountants, Kuala Lumpur, Malaysia. (Submitted)

Tan, Mei Lyne (2017) Development Of Water Level Of Wastewater Treatment Plant Monitoring System By Using PLC With HMI Features. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Ren Jie (2017) Performance Analysis Of 1HP Split Type Room Air Conditioner Using Refrigerant R410A And R32. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wei Chiang (2017) Design And Development Of An Autonomous Underwater Vehicle (AUV). Project Report. UTeM, Melaka. (Submitted)

Tan, Xihan (2017) A Study Of Future Of Manufacturing In The Context Of Developed Countries. Technical Report. UTeM, Melaka. (Submitted)

Tan, Xin Yi (2017) Effect Of Plastomere On Mechanical Properties And Characteristics Of Frozen Cast Polypropylene Film For Food Packaging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Yi Lin (2017) Development Of A Wearable Ankle Rehabilitation Device For Patient With Calf Muscles Flexibility Problems By Using Arduino Uno. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Ying Ying (2017) Cooperative Between Two Humanoid Robots In Completing Tasks. Project Report. UTeM, Melaka. (Submitted)

Tan, Yun Sheng (2017) Implementation Of Continuous Wearable Low Power Blood Glucose Level Detection Using Galvanic Skin Response GSR Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Zhi Wei (2017) Development Of Cost Effective Human Powered Generator And Fitness Health Analyzer By Using Labview. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tan, Zi Hao (2017) Examination Of Buckling Behaviour Of Axially Compressed Cylinder With Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Hong Kwong (2017) Performance And Energy Analysis For Hybrid Evaporative Chiller System Controlled By Chilled Water Temperature By Heater. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Mei Shick (2017) The Influence Of Process Parameters On Mechanical Properties Of Fused Deposition Modeling Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Wilfred Kah Jung (2017) CFD Simulation Of Shell And Tube Type Heat Exchanger : Effect Of Flow Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tariq, Muhammad Akmal Dodgson (2017) Development Of Household Power Trip Monitoring Devices Utilizing Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka. (Submitted)

Tay, Choon Kiat (2017) Design And Development Of Spherical Camera Based Deep Learning Enabled Auto Lane Width Measurement For Road Safety Grading System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tee, Shaw Ting (2017) A Study On Effect Of Process Parameters In Sheet Metal Forming Simulation Of AA5052. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Tian Leng (2017) Acceptance Level Of Consumer To Purchase Modular Cabinet Through Online Shopping. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Tee, Wan Xin (2017) Factors Influence Consumer Buying Intention : A Study Of The Smartphone In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teng, Teck Wee (2017) Development Of The Water Quality Monitoring And Notification System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tengku Abdul Jalil, Tengku Ahmad Shauki (2017) Design And Fabrication Of Personal Electric Vehicle Driven By Brushless Hub Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Huei Boon (2017) Modification Of Headlight Intensity Control Based On Distance By Using Bluetooth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teo, Kah Chun (2017) The Solid Wood Filled Tube Under Axial Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Phaik Yuan (2017) Optimisation Of Poka-Yoke Concept To Develop A Prism Jig Assembly For Semiconductor Industry. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teo, Xue Chee (2017) The Development On Forearm Crutches To Reduce Upper Limb Pressure Distribution Evaluated By EMG (Electromyography). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teoh, Ai Kee (2017) Transient Analysis Of Electrical Circuits Using Runge-Kutta Method. Technical Report. UTeM, Melaka. (Submitted)

Teoh, Yen Ting (2017) A Development Of Smart Automated Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teong, Jet Fang (2017) Improvement On Water Pump Blade Design By Using CFD Simulation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Teow, Boon Pei (2017) Disaster Alert System (DISAST). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tham, Wai Teng (2017) Design A Low Cost Bread Toaster Using DFMA Method. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Thankadurai, Raaja Panndiyan (2017) Design & Development Of Oil Disposal System For Grease Trap Using PUGH Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Theah, Soon Aik (2017) IOT-Based Community-LED Air Quality Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Thong, Foo Vung (2017) Persidangan Pengguna SAGA P&P 2017, MPSAS : Transisi & Adaptasi. Jabatan Akauntan Negara Malaysia. (Submitted)

Tia, Chun Yau (2017) Design, Analysis And Development Of Tennis Ball Collector For A Tennis Court Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ting, Hui Yin (2017) Investigation Of The Effect Of Raster Angle And Layer Thickness On Mechanical Properties Of Fused Deposition Modeling (FDM) Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiong, Nathanael Yong Sing (2017) Design Of Intelligent Traffic Light System For Efficient Traffic Fow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tneh, Tze Yeow (2017) Implementation Of IoT On Water Quality Improvement Through A Sustainable Design At Tasik UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toh, Hui San (2017) Sustainability Key Performance Indicators (Kpis) For Healthcare Industry Using Analytic Network Process (ANP). Project Report. UTeM, Melaka. (Submitted)

Tong, Siau Khee (2017) EEG-Based Emotion Classification By Using Convolutional Neural Network (CNN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Too, Jing Wei (2017) Analysis Of Spinal EMG Signal When Swinging An Object. Project Report. UTeM, Melaka. (Submitted)

Too, Yi Wei (2017) The Physiognomy Of Customer Archetype Towards The Product Design Preference. Technical Report. UTeM, Melaka. (Submitted)

Tormudzi, Umi Nurnajeha (2017) A Study On Profile Design Using Kano-AHP Approach For Baju Muslimah Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tung, Chia Seng (2017) Development Of A GUI For Automatic Eye Tracking For Post Data Analysis. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Tunku Adaham, Tunku Aidil Ilham (2017) Electrochemical Performance Of Graphene/Molybdenum Disulfide Electrodes Based Supercapacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

Unakrishnan, Vinesh (2017) An Experimental Investigation Of Multi-Ring Under Quasi-Static And Dynamic Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

Veeran, Sassinananthan (2017) Surface Mounted On Body Antenna Design At Medical Implant Communication Service Band For Tele-Medicine Application. Project Report. UTeM, Melaka. (Submitted)

W

Wahab, Muhammad Saffuan (2017) Tie Rod Analysis On Rack And Pinion Steering System For Small Class Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ab Llah, Wan Asmafarahana (2017) Factors That Effecting The Successful Of Women Entrepreneur In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Abdullah, Wan Zul Atfi (2017) A Study On Adoption Of Online Banking Application Among Generations In Melaka. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Awang, Wan Azniza (2017) Effect Of Pressure On Composite And Aluminum Bonding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Hussin, Wan Hiqmal Hisyam (2017) Flexural Behaviour Study Of Polypropylene At Different Ash Filler Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Kassim, Syed Hafiz Ifwat (2017) Impact Test Simulation With Different Velocity Using FEA For Bumper Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mamat, Wan Nabilah (2017) Nutrifying The Fast Food Industry:Cases Study At Mcdonalds, Kfc And Pizza Hut In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Mohamed Daid, Wan Mohamed Ruzaini (2017) Development Of Pico Hydro Generation System With Low Cost Waterwheel Type Turbine. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Mohammed Azmi, Ainnur Marshitah (2017) Development Of Fall Detector Using Arduino Through GSM For Health Care Use. Project Report. UTeM, Melaka. (Submitted)

Wan Mohd Kamil, Wan Nur Syahirah (2017) Optimum Sizing Of Grid Connected Photovoltaic (GCPV) System Under Tropical Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nasruddin, Wan Norizzati Nadia (2017) The Impact Of Work Environment Toward Business Sustainability In Hotel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nur Zafira, Wan Saifuddin (2017) Development of nonliner PI controller of wastewater treatment plant. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wan Omar, Wan Norsyahirah (2017) Technology Market Intelligence Of Prefabricated Modular Homes For Construction Industry In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Yusuf, Wan Norsyamila (2017) Porous Tricalcium Phosphate For Dental Application. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wan Zaidi, Aiman Izzati (2017) Improving The Densification Of Alumina Based Ceramics For Cutting Tool Using Binder Agent. Project Report. UTeM, Melaka. (Submitted)

Wan Zainudin, Wan Amirul Arif (2017) Impact Of Risk Control Implementation On Financial Performance Of Small And Medium-Sized Enterprises (SMEs) Trading Companies In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wang, Sheng Hue (2017) Investigation Of The Buckling Behavior Of Axially Compressed Truncated Cone With Uneven Length. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wee, Bulan Ammy Lee Yen (2017) Preparation Of Cobalt Decorated Titanium Dioxide Nanotubes By Electrodeposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wee, Wei Huat (2017) Design, Analysis And Development Of Tennis Ball Launcher For A Tennis Court Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wee, Yuan Huan (2017) The Influence Of Packaging Attributes On Consumer Purchase Decision Of Face Cleansing Product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wike, Mardiana (2017) Practice Corporate Social Responsibility Disclosure : Study Comparative On Oil Palm Plantation Company Go Public In Indonesia And Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woi, Kah Wei (2017) Investigation On Tensile And Hardness Properties Of Novel Hybrid Oil Palm Empty Fruit Bunch/ Kenaf Reinforced High Density Polyethylene Composite For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Won, Poh Ting (2017) Ultra-WideBand antenna array design and development for microwave imaging. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong, Chien Hing (2017) Characterization Of Biomechanical Properties Of Articular Cartilage Using Magnetic Resonance Imaging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, How Jie (2017) Mechanical Design And Development Of A 4 Wheels Skid Steering Mobile Platform System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Jia Li (2017) Self-Powered Wireless Sensor Node For Vibration Level Monitoring. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Michelle Khai Shing (2017) Structural Design And Mechanism Analysis Of Oil Palm Harvester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Pui See (2017) The Factors Influencing Gender Differences In Purchasing Decision Of Healthy Food Among UTeM Staffs. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Teng Hui (2017) Preparation And Characterisation Of Natural Fiber Filled Asphalt Based Damping Material. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Wong, Yew Moon (2017) Development Of The Unmanned Aerial Vehicle In Hexacopter For Attitude Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Woon, Chee Hong (2017) Classification Of Normal People And People With Parkinson's Disease Based On Speech Signals Using Simulation Of MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woong, Meng Fai (2017) Development Of Motorcycle Security System Using RFID And GSM. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Y

YAS, @Jaluma 4.0 (2017) I'm The Excellent Talent. Ministry Of Higher Education, Nilai Spring Resort Hotel, Negeri Sembilan. (Submitted)

Yaacob, Noor Izani (2017) The Impact Of Merger In Automotive Company:A Case Study On PROTON Holding Berhad. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yaakob, Mohd Yuhazri and Salit, Mohd Sapuan and Pieter, Hasoloan Haery Ian and Badarulzaman, Nur Azam and Mohd Sohaimi, Risby (2017) Fundamental Study On Direct Recycling Of RHDPE In Concrete Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya, Muhamad Amerul Mukmin (2017) Electrodepostion Of Nickel Fly Ash (Ni-FA) Composite Coating On Aluminium Alloy 7075 Substrate From Non-Aqueous Media : Study Effect Of Current Density. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya, Muhammad Reza (2017) Experimental Investigation Of Drilling Process Using Nanofluid As A Coolant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahya, Muhammad Hilmi (2017) Determination Of Lightning Distance From Thunder And Radiation Electric Field. Project Report. UTeM, Melaka. (Submitted)

Yahya, Sahrul Bakyah (2017) Design And Analysis Of Gating In Plastic Paper Clip Mold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahya Mohammed Alkhashi, Feda' Aadeen (2017) Comparative Study Between Linear And Intelligent Controllers For Anti-Sway Gantry Crane System. Project Report. UTeM, Melaka. (Submitted)

Yakup, Yazid (2017) Design And Development Of Sportbike (Moped Yamaha Y15ZR) Frame Slider (Aluminium). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yang Xin, Mei (2017) The Effect Of Cell Wall Thickness On Mechanical And Physical Properties Of Rubber Wood Honeycomb Composite. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, June Wai (2017) Interactive Objects For Augmented Reality By Using Oculus Rift And Motion Sensor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yap, Yeok Ven (2017) Reveal Hidden Waste Through Maynard Operation Sequence Technique (MOST) - A Case Study. Technical Report. UTeM, Melaka. (Submitted)

Yazid, Muhammad Hakim Aiman (2017) Personality & Communication Identification Towards A Better Relationship Between Superior & Subordinate At Melaka Chief Minister Department. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yee, Sze Ling (2017) Investigation On Mechanical Properties Of Additive Manufacturing Bone Scaffold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeo, An Huat (2017) Challenges For Halal Certification Process Towards Intellectual Property (IP) Protection In The Food Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeo, Wei Cheng (2017) Design And Development Wireless Switch Powered By Aloe Vera. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yeoh, Jesmen Long Shen (2017) Analysis Of Propagational Model For 4G System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yew, Peter Kwong Yong (2017) Design And Development Of Shield For Fire Resistance Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Yuan Soon (2017) Line Follower For Surveillance Camera Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yow, Inn Ann (2017) Exploring The Challenges Ans Strategies In Implementing Of Sustainable Fishery Management In Mersing. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yumasir, Mohamad Hadi (2017) Design Analysis Of Metal Forming Process For The Corrugated Metal Gasket. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yunus, Ahmad Rozelan (2017) Personaliti dan keakuran: faktor mempengaruhi pencapaian akademik. Project Report. Penerbit UTeM.

Yunus, Ahmad Rozelan and Aris, Amir (2017) Kemahiran melayan dalam pengajaran. Manual. Penerbit UTeM.

Yunus, Ahmad Rozelan and Aris, Amir (2017) Mendepani tekanan kerja & agresif marah. Manual. Penerbit UTeM.

Yunus, Ahmad Rozelan and Aris, Amir and Ahmad, Wan Rani (2017) Strategi Belajar Berkessan: Universiti & Sekolah. Manual. Penerbit UTeM.

Yusof, Nur Azniza (2017) Design Analysis Of A Rectangular Aluminum Crash Box For Frontal Accident Protection. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusoff, Ahammad Sadiq (2017) Development Of Indoor Air Quality (IAQ) Display Unit Using Arduino. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yusoff, Muhammad Ridwan (2017) Development Of High Voltage Rectifier. Technical Report. UTeM, Melaka. (Submitted)

Yusoff, Yussafendi (2017) Assessing Consumer Preferences Towards Health And Beauty Products By Local Malay Manufacturers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusuf, Yusliza and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Azhari, Muhamad Azwar and Omar, Nooririnah and Wan Zulkuifli, Wan Amirul Shafiz (2017) Wear And Corrosion Protection Enhancement Of MgAZ91D Through The Deposition Of TiABN Duplex Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusuff, Mohd Asri and Zakaria, Kamarul Ariffin and Sudin, Mohd Nizam and Tee, Boon Tuan and Ahmad, Azrin and Razi, Mashitah and Engku Mohamed, Engku Ahmad Azrulhisham (2017) Novel Prediction Reliability Model Using Small Hydro Power Optimization Tool For Performance Investigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zahar, Mohamad Yusri (2017) Analysis Frequent Failures In Electrostatic Precipitator To Measure Efficiency At Coal-Fired Power Plant. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zahar, Muhammad Hafizuddin (2017) Determination Of Dynamic Properties Of Laminated Rubber-Metal Spring Circular Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahari, Noor Mazriha (2017) The Effectiveness Of Hospital Marketing Promotion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaharuddin, Muhammad Zulhafizi (2017) Design And Analysis Of The Suspension System For Single Seated Educational Racing Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaid, Fitriah Athirah (2017) Harmonic And Interharmonic Analysis Of Arc Furnace In Power Distribution By Using Periodogram. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaidi, Maryam Nabihah (2017) Power Factor Improvement Using Automatic Power Factor Compensation (APFC) Device For Medical Industries In Malaysia. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zaidi, Muhamad Azim (2017) Penganggaran Dalam Analisis Keupayaan Tenaga Kuasa Hidro Menggunakan Kaedah Monte Carlo. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaimi, Nik Muhamad Firdaus (2017) Development Of An Electronic Educational Quiz Kit That Test Student Knowledge On Translating Timing Diagram To The PLC Ladder Diagram. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal, Muhammad Azmir (2017) Design And Fabrication The Electric Bicycle For Disable And Older Person. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal, Muhammad Zulhilmi (2017) Smart Wireless Security System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal, Nor Izhani (2017) Development Of Remote Terminal Unit (RTU) For Power Quality Monitoring System. Project Report. UTeM, Melaka. (Submitted)

Zainal Abidin, Mohamad Azwan (2017) Wired Supply For Aerial Drone In Harsh Environment : Power Management. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainal Abidin, Mohd Izzat (2017) Design And Analysis Of Plastic Injection Mould Using Multiple Cavity Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Muhamad Aqil (2017) Finite Element Analysis Of Oblique Impact On Composite Bicycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Kifli, Muhammad Syahmi (2017) Investigation On The Suitability Of Plastic Bottle Material As 3D Printer Filament. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainee, Adi Zafran (2017) IoT Based:Energy Saving Monitoring System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainin, Nur Syafiqa (2017) Fiber Optic Sensor For Different Concentrations Detection Of Honey. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainol, Sabri Adlan (2017) Design And Analysis Of A Lightweight Chassis For Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainol Azmi, Muhammad Fahim (2017) Object Tracking And Acquiring Using Vision Guided Mobile Robot. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainuddin, Muhammad Fikri (2017) Anthropometry Of UTeM FKP Male Students Comparison Using Motion Capture Camera And Traditional Anthropometric Method. Technical Report. UTeM, Melaka. (Submitted)

Zainudin, Muhammad Abi Dzar (2017) Improvement Of Tribological Properties Of Palm Oil As Bio-Lubricant Through Addition Of ZDDC And MoDTP. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zainudin, Luqman Hakim (2017) Combustion In Micro Combustors With Reduced Chemical Kinetic Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainudin, Robiatul Aqirah (2017) Development Of Casing And Ventilation System In 3D Printer, Prusa 13 By Using Integrated Approach. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Mohd Izuddin (2017) Design And Development Of A Wireless Water Level Measuring And Notification System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Alifdin (2017) Factor That Influence Consumer Buying Behaviour Towards Acceptance Of Coffee Product. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Khairul Azri (2017) Design Of Planar Antenna For Off Grid Wireless Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Nabel (2017) Impact Test Simulation With Different Impact Direction Using FEA For Bumper Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Thazaly (2017) Investigation On The Performance Gasoline Blended With Hydrogen Peroxide As Fuel For Petrol Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Muhammad Yusuf (2017) Experimental Investigation Of Tungsten Carbide Using Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nur Shahirah (2017) Development Of Crosswind Detection For Direction And Speed Monitoring System At Highway Using Android APP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamlus, Muhammad Izz (2017) Development And Control Of Exoskeleton (Upper Limb) For Mobility Support. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamuri, Amiza Aliyana (2017) Reducing Rejection On Nickel Free Plating At Finishing Line In Metal Manufacturing Company By Using Kaizen Approach. Project Report. UTeM, Melaka. (Submitted)

Zarini, Md Zauber (2017) Development of a wide-band vibration-based piezoelectric power generation system. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zulkafli, Norizzati (2017) Measurement Of Residual Stress In Cold Work Austenitic Stainless Steel 316L With Deflection Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafli, Nurfarah Ummairah (2017) Development Of Machining Waste Collection System To Enhance Safety And Productivity. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulke, Mohamad Zulhilmi (2017) Determinants Of Sustainable Financial Resources For SME In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkefli, Muhammad Dzulzhafrain Ilman (2017) The Effect Of Flap To Aerodynamics Performance Of Airfoil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkiflee, Syaza Nasuha (2017) Obstacle Avoidance In Indoor Environment Using Sensor Fusion For Mobile Robot. Technical Report. UTeM, Melaka. (Submitted)

Zulkifli, Isfarini (2017) Impacts Of E-Service Quality (E-SQ) Dimensions Towards Customers Satisfaction In Internet Banking Usage At Melaka City. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zulkifli, Mirza Zuhair (2017) The Importance Of Entrepreneurial Education Program As A Moderating Variable To Boost Family Business Knowledge Amongst Student In Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Nur Atikah (2017) A Harmonic Detection Of Rectifier Load In Power Distribution System. Project Report. UTeM, Melaka. (Submitted)

Zulkifli, Nurul Atiqah (2017) Printing Large 3D Objects With Interlocking Part Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zullkarnain, Muhammad Faiz (2017) Internet Of Things (IoT) Enabled For Door Access System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

This list was generated on Sat Feb 22 14:58:17 2020 MYT.