Items where Year is 2017

Article

Hanafi and Suryana, Nanna and Hasan Basari, Abd Samad (2017) Paper Survey And Example Of Collaborative Filtering Implementation In Recommender System. Journal Of Theoretical And Applied Information Technology, 95 (16). pp. 4001-4014. ISSN 1992-8645

Muh Hanafi and Suryana, Nanna and Hasan Basari, Abd Samad (2017) Evaluation Of e-Service Quality, Perceived Value On Customer Satisfaction And Customer Loyalty: A Study In Indonesia. International Business Management, 11 (11). pp. 1892-1900. ISSN 1993-5250

Lim, Z.Y. and Putra, Azma and Mohd Nor, Mohd Jailani and Yaakob, Mohd Yuhazri (2017) Sound Absorption Performance Of Natural Kenaf Fibres. Applied Acoustics, 130. pp. 107-114. ISSN 0003-682X

Mohamad, Noraiham and Zohid, M. A. and Karim, K. I. and Mazliah, M. and Abd Razak, Jeefferie and Lau, K. T. and Munawar, Rose Farahiyan and Ab Maulod, Hairul Effendy (2017) Lightweight And Green Tiles From Recycled Polypropylene Reinforced With Cockle-Shells Powder. Proceedings Of Innovative Research And Industrial Dialogue’16. pp. 41-42. ISSN 1819-6608

A Masius, Alphonsos and Wong, Yan Chiew and Lau, Kok Tee (2017) Miniature High Gain Slot-Fed Rectangular Dielectric Resonator Antenna For IoT RF Energy Harvesting. AEU - International Journal Of Electronics And Communications, 85. pp. 39-46. ISSN 1434-8411

A. Aziz, N. Nadia and Haroon, Hazura and Abdul Razak, Hanim and Mohd Zain, Anis Suhaila and Othman, Syariffah and Salehuddin, Fauziyah (2017) Stress-Optical Effect Analysis On Silicon-On-Insulator Planar Waveguide. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3). pp. 101-104. ISSN 2180-1843

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2017) Effect Of Hidden Wastes In Overall Equipment Effectiveness Calculation. ARPN Journal Of Engineering And Applied Sciences, 12 (22). pp. 6443-6448. ISSN 1819-6608

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2017) Effect Of Hidden Wastes In Overall Equipment Effectiveness Calculation. ARPN Journal of Engineering and Applied Sciences, 12 (22). pp. 6443-6448. ISSN 1819-6608

Ab Aziz, Ab Wafi and Rahim, Norain and Amirhussain, Amir Hariz and Norddin, Nur Bahirah (2017) Intelligent Tenaga Nasional Berhad (TNB) Single Phase Power Supply Cut-Off. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-7). pp. 55-58. ISSN 2180-1843

Ab Ghani, Ahmad Fuad and Mahmud, Jamaluddin (2017) Shear Deformation Behavior Of Hybrid Composite (GFRP/CFRP). Materialwissenschaft Und Werkstofftechnik, 48 (3-4). pp. 273-282. ISSN 0933-5137

Ab Ghani, Ahmad Fuad and Mahmud , Jamaluddin (2017) Material Characterization Of Hybrid Composite: Experimental Using Strain GAUGE/DIC With Finite Element Modelling Macro/Micro Scalens. Key Engineering Materials, 740 (-). pp. 31-40. ISSN 1662-9795

Ab Ghani, Sharin and Muhamad, Nor Asiah and Zainuddin, Hidayat and Noorden, Zulkarnain Ahmad and Mohamad, Noraiham (2017) Application Of Response Surface Methodology For Optimizing The Oxidative Stability Of Natural Ester Oil Using Mixed Antioxidants. IEEE Transactions On Dielectrics And Electrical Insulation, 24 (2). 974 - 983. ISSN 1070-9878

Ab Ghani, Sharin and Muhamad, Nor Asiah and Noorden, Zulkarnain Ahmad and Zainuddin, Hidayat and Ahmad, Asimi Ana (2017) Multi-Response Optimization Of The Properties Of Natural Ester Oil With Mixed Antioxidants Using Taguchi-Based Methodology. IEEE Transactions On Dielectrics And Electrical Insulation, 24 (3). 1674 - 1684. ISSN 1070-9878

Ab Ghani, Sharin and Muhamad, Nor Asiah and Noorden, Zulkarnain Ahmad and Zainuddin, Hidayat and Talib, Mohd Aizam (2017) Oxidation Stability Enhancement Of Natural Ester Insulation Oil: Optimizing The Antioxidants Mixtures By Two-Level Factorial Design. ARPN Journal Of Engineering And Applied Sciences, 12 (6). pp. 1694-1700. ISSN 1819-6608

Ab Ghani, Sharin and Noorden, Zulkarnain Ahmad and Muhamad, Nor Asiah and Zainuddin, Hidayat and Abdullah, Muhammad Ilman Hakimi Chua and Sutan Chairul, Imran (2017) Dielectric Strength Improvement Of Natural Ester Insulation Oil Via Mixed Antioxidants: Taguchi Approach. International Journal Of Electrical And Computer Engineering (IJECE), 7 (2). 650 - 658. ISSN 2088-8708

Ab Hadi, Nik Azran (2017) Design And Development Of Smart Autonomous Fire Detector Robot. Journal of Engineering and Applied Sciences, 12 (23). pp. 7223-7228. ISSN 1816-949X

Abd Aziz, Ellyana Shaira and Kamarudin, Muhammad Nizam and Jali, Mohd Hafiz and Ghazali, Rozaimi (2017) Modeling And Stability Analysis Of Linear Actuated Finger. International Journal Of Control And Automation, 10 (1). pp. 49-62. ISSN 2005-4297

Abd Aziz, Mohamad Zoinol Abidin and Abu Hussin, Farhana and Ahmad, Badrul Hisham and Suaidi, Mohamad Kadim and Md Fauzi, Noor Azamiah (2017) Design And Impedance Modeling Of Complementary Circular Loop FSS At 2.4ghz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1-5). pp. 115-118. ISSN 2180-1843

Abd Latif, Mohd Abrar and Abd Manaf, Mohd Edeerozey and Shamsudin, Zurina (2017) Mechanical Properties of Kenaf Reinforced Polypropylene Composites Added with Oil Palm Shell Powder and Its Activated Carbon. Proceedings of Innovative Research and Industrial Dialogue 2016. pp. 37-38. ISSN 978-967-0257-92-1

Abd Rashid, Mohd Warikh and Mat Harttar @ Mohd Hatta, Maziati Akmal and Azmi, Nurul Azuwa and Azlan, Umar Al-Amani (2017) The Effects Of Different Annealing Temperature And Number Of Deposition Layers On The Crystallographic Properties Sodium Niobate (KNN) Thin Films Synthesized By Sol-Gel Spin Coating Technique. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 91-102. ISSN 1985-3157

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Comparison Of Information Criterion On Identification Of Discrete-Time Dynamic System. Journal of Engineering and Applied Sciences, 12 (1 SI). pp. 5660-5665. ISSN 1816-949X

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Discrete-Time System Identification Based On Novel Information Criterion Using Genetic Algorithm. Journal Of Fundamental And Applied Sciences, 9 (7S). pp. 584-599. ISSN 1112-9867

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Parameter Magnitude-Based Information Criterion In Identification Of Discrete-Time Dynamic System. Journal Of Mechanical Engineering (JMechE), SI 4 (1). pp. 119-128. ISSN 1823- 5514

Abdal Kadhim, Ali Mohammed and Kok, Swee Leong (2017) Characterization Of Thermoelectric For Energy Harvesting On Low-Level Heat Sources. Proceedings Of Mechanical Engineering Research Day 2017. pp. 164-165. ISSN -

Abdal Kadhim, Ali Mohammed and Kok, Swee Leong (2017) Piezoelectric Pre-Stressed Bending Mechanism For Impact-Driven Energy Harvester. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-10. ISSN 1757-8981

Abdul Aziz, Nor Azah and Senik, Rosmila and Foong, Yau Soon and Ong, Tze San and Attan, Hassan (2017) Influence Of Institutional Pressures On The Adoption Of Green Initiatives. International Journal Of Economics and Management (IJEM), 11 (S3). pp. 939-967. ISSN 1823-836X

Abdul Latiff, Anas and Kadir, N.A and Ismail, E.I. and Shamsuddin, H. and Ahmad, H. and Harun, S.W. (2017) All-Fiber Dual-Wavelength Q-Switched And Mode-Locked EDFL By SMF-THDF-SMF Structure As A Saturable Absorber. Optics Communications, 389 (-). pp. 29-34. ISSN -

Abdul Latiff, Anas and M. Rusdi, M. F. and Hisyam, M. B. and Ahmad, H. and Harun, S. W. (2017) A Generation Of 2 Um Q-Switched Thulium-Doped Fibre Laser Based On Anatase Titanium (IV) Oxide Film Saturable Absorber. Journal Of Modern Optics, 64 (2). pp. 187-189. ISSN 0950-0340

Abdul Manap, Redzuan and Ling, Shao and Frangi, Alejandro Federico (2017) PATCH-IQ: A Patch Based Learning Framework For Blind Image Quality Assessment. Information Sciences, 420. pp. 329-344. ISSN 0020-0255

Abdul Munir, Fudhail and Mikami, Masato and Hassan, Muhammad Zahir and Salim, Mohd Azli (2017) Flame Stabilization In Multiple Inlet Channel Meso-Scale Tube Combustors With Wire Mesh. Journal Of Advanced Vehicle System, 4 (1). pp. 20-27. ISSN 2550-2212

Abdul Munir, Fudhail and Mohd Tahir, Musthafah and Mohd Shafie, Abdul Muhaimin and Hassan, Muhammad Zahir (2017) Development Of Numerical Model For Simulation Intake Flow In Combustion Chamber Of L-Head Engine Type. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 134-142. ISSN 2227-2771

Abdul Munir, Fudhail and Seo, Takehiko and Mikami, Masato (2017) Optimization Of Flame Stabilization Limits In Meso-Scale Tube Combustors With Wire Mesh. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17. pp. 186-192. ISSN 2227-2771

Abdul Munir, Fudhail and Sukri, Muhammad Izzat Syazwan and Syahrial, Fadhli and Roseli, Adnan and Dhar Malingam, Sivakumar and Hassan, Muhammad Zahir (2017) Design of engine mounting for single seated educational racing vehicle. ARPN Journal of Engineering and Applied Sciences, 12 (24). pp. 7348-7351. ISSN 1819-6608

Abdul Rahman, Farah Khalidah and Md Saat, Mohd Shakir and Yusop, Yusmarnita and Husin, Siti Huzaimah (2017) Simulation-Based Study Of Capacitance Values Affected By Various Dielectric Materials And Distances For Low Power Wireless Power Transfer System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 61-65. ISSN 2180-1843

Abdul Rahman, Farah Khalidah and Md Saat, Mohd Shakir and Yusop, Yusmarnita and Husin, Siti Huzaimah and Yahya, Aziz (2017) Design And Analysis Of Capacitive Power Transfer System With And Without The Impedance Matching Circuit. International Journal Of Power Electronics And Drive System (IJPEDS), 8 (3). pp. 1260-1273. ISSN 2088-8694

Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Chiew, Tsung Heng and Maharof, Madihah and Retas, Zain and Che Ku Junoh, Sahida and Syed Salim, Syed Najib (2017) Tracking Performance Of NPID Controller For Cutting Force Disturbance Of Ball Screw Drive. Journal of Mechanical Engineering and Sciences (JMES) , 11 (2). pp. 3227-3239. ISSN 2231-8380

Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Retas, Zain and Chiew, Tsung Heng and Syed Salim, Syed Najib (2017) Precise Positioning Control Strategy Of Machine Tools: A Review. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 11-15. ISSN 2180-1843

Abdullah, Mohd Zulkifly and Ali Mokhtar, Mohd Najib and Saad, Abdullah Aziz and Samsudin, Zambri and Che Ani, Fakhrozi (2017) Numerical Simulation Of Self-Alignment Of Chip Resistor Components For Different Silver Content During Reflow Soldering. Microelectronics Reliability, 79. pp. 69-78. ISSN 0026-2714

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2017) Tribological effects of nano-based engine oil diluted with biodiesel fuel. International Journal of Surface and Engineering, 11 (1). pp. 12-22. ISSN 1749-785X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Saleman, Abdul Rafeq (2017) The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine. Journal of Mechanical Engineering, SI 1 (1). pp. 103-112. ISSN 1823-5514

Abdullah, Norida and Husin, Noraini and Kong, Felicia Hie Lay and Ariffin, Hafzan and Mohammad Rawi, Ali Hafizar (2017) The Relationship Between Life Satisfaction, Parenting Style And Risky Behaviors Among Adolescent: Systematic Review. Journal Of Human Capital Development (JHCD), 10 (2). pp. 49-62. ISSN 1985-7012

Abdullah, Norida and Shonubi, Olurotimi Adebayo and Vazeer Alam, Azra Tasneem (2017) Stressors Contributing To Depression Among First Year Medical Student. Journal Of Human Capital Development (JHCD), 10 (2). pp. 15-25. ISSN 1985-7012

Abdullah Sani, Nurhernida and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham and Shueb, Mohamad Iqbal (2017) Effects of Nanographene Addition on Tensile and Electrical Properties of Nylon 6,6 Nanocomposite. Proceedings of Innovative Research and Industrial Dialogue 2016. pp. 35-36. ISSN 978-967-0257-92-1

Abdulqader, Ibrahim Mundher and Lim, Kim Chuan (2017) Evaluation of Image Pixels Similarity Measurement Algorithm Accelerated on GPU with OpenACC. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) . ISSN 2180-1843 (In Press)

Abu, Maisarah and Md. Ali, Siti Adlina and Hassan, Hasnizom and Mohamad, Najmiah Radiah (2017) Flexible Dual Band Dipole Antenna with Electromagnetic Band Gap. Indonesian Journal Of Electrical Engineering And Computer Science. pp. 593-598. ISSN 2502-4752

Abu, Maisarah and md. ali, siti Adlina and Zabri, S.N. (2017) IMPROVEMENT OF DIPOLE ANTENNA GAIN USING 8 CBU AMC-EBG AND 8 CBU FSS. Jurnal Teknologi. pp. 27-34. ISSN 0127-9696

Abu, Nor Hashidah and Mohamad Jaya, Abdul Syukor and Muhamad, Mohd Razali (2017) Modeling Sustainable Manufacturing Practices Towards Economy Sustainability Performance. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4214-4218. ISSN 1819-6608

Abu Bakar, Hamzah and Abd Aziz, Mohamad Zoinol Abidin and Ahmad, Badrul Hisham and Ghani, Suhana and Hassan, Nornikman (2017) Broadband Right-Handed Circular Polarized (RHCP) Antenna With Loop Metasurfaces. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 123-126. ISSN 2180-1843

Abu Hassan, Ahmad Taqiyuddin and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Ani, Mohd Hanafi and Hamid, Malek (2017) Motorcyclists’ Head Check Behavior During Merging In Traffic: Effect Of Different Ranges Of Merging Lane Length. Human Factors And Ergonomics Journal, 2 (3). pp. 39-45. ISSN 2590-3750

Abu Hussin, Farhana and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Sadick Ali, Nur Shaheera Alia (2017) Design And Impedance Modeling For Rectangular Slot Frequency Selective Surface (FSS) On Glass. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 31-35. ISSN 2180-1843

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2017) Fatigue Damage Simulation Of Automobile Steering Knuckle Subjected To Variable Amplitude Loading. International Journal Of Techology And Engineering Studies, 3 (6). pp. 245-252. ISSN 2415-0924

Ahamat, Amiruddin (2017) Is Islamic Banking And Finance Doing Enough? Shaping The Sustainable And Socially Responsible Investment Community. Asian Social Science, 13 (3). pp. 170-176. ISSN 1911-2017

Ahamat, Amiruddin and Shahkat Ali, Muhamad Sham and Hamid, Norfaziela (2017) Factors Influencing The Adoption Of Social Media In Small And Medium Enterprises (SMES). International E-Journal of Advances in Social Sciences, III (8). pp. 338-348. ISSN 2411-183X

Ahmad, Asmala and Quegan, Shaun (2017) Analysis Of Signal To Noise Ratio On Restored Multispectral Data. Applied Mathematical Sciences, 11 (7). pp. 299-309. ISSN 1314-7552

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishamuddin and Zamzuri, Hairi and Abd Kadir, Zulkiffli and Aparow, Vimal Rau (2017) Modelling And Control Of A Fixed Calliper-Based Electronic Wedge Brake. Strojniški Vestnik - Journal Of Mechanical Engineering, 63. pp. 181-190. ISSN 0039-2480

Ahmad, Noor Azman Bin and Tahir, Md.Nor Hayati (2017) Procurement Flexibility Of The Dimension Of Information Technology Systems For Furniture Industry In Malaysia. International Journal Of Emerging Research In Management &Technology, 6 (6). pp. 174-183. ISSN 2278-9359

Ahmad, Suraya (2017) The Challenges Of Lean Implementation: A Multiple Case Study In Malaysian Aerospace Companies. Journal Of Asian Vocational Education And Training, 10. pp. 103-120. ISSN 2005-0550

Ahmad Radzi, Syafeeza and Faiz, K. and Khalid, Syazana Itqan and Wong, Yan Chiew and Mohd Noh, Zarina and Mat Ibrahim, Masrullizam and Mahmod, Noor Mazlina (2017) Design Of Finger-Vein Capture Device With Quality Assessment Using Arduino Microcontroller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1). pp. 55-60. ISSN 2180-1843

Ahmad Radzi, Syafeeza and Ngan, Albert Ban Chew and Mohd Sadari, Muhammad Muhaimin Hilmi and Kamaruddin, Mohamad Nasriq and Wong, Jia Li and Md Zauber, Zarini (2017) Electronic Online Handwriting Character Recognition System Using Arduino Platform. Jurnal Teknologi, 79 (7). pp. 51-59. ISSN 0127-9696

Ahmad Rahman, Ahmad Hanif and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Ani, Mohd Hanafi and Hamid, Malek (2017) Evaluation Of Motorcyclists’ Hazard Anticipation Behavior At Unsignalized Roundbaouts: On-Campus Vs. Off-Campus. Human Factors And Ergonomics Journal, 2 (3). pp. 46-51. ISSN 2590-3750

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Ab Rashid, Siti Rosmaniza and Mohd Bahar, Amyrul Azuan (2017) High-Q Sensor Based On Symmetrical Split Ring Resonator With Spurlines For Solids Material Detection. IEEE Sensors Journal, 17 (9). pp. 2766-2775. ISSN 1530-437X

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Ab Rashid, Siti Rosmaniza and Mohd Bahar, Amyrul Azuan and Shaaban, Azizah (2017) Microwave Bio-Sensor Based On Symmetrical Split Ring Resonator With Spurline Filters For Therapeutic Goods Detection. PLOS ONE, 12 (9). pp. 1-22. ISSN 1932-6203

Al-Masoodi, Ahmed Hasan Hamood and Ahmed, Mahmoud Hazzaa M. and Abdul Latiff, Anas and Azzuhri, S.R. (2017) Passively Mode-Locked Ytterbium-Doped Fiber Laser Operation With Few Layer MoS2-PVA Saturable Absorber. Optik, 145. pp. 543-548. ISSN 0030-4026

Al-Masoodi, Ahmed Hasan Hamood and Yasin, Moh and Ahmed, Mahmoud Hazzaa M. and Abdul Latiff, Anas and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Mode-Locked Ytterbium-Doped Fiber Laser Using Mechanically Exfoliated Black Phosphorus As Saturable Absorber. Optik, 147. pp. 52-58. ISSN 0030-4026

Al_Barazanchi, Israa and Shibghatullah, Abdul Samad and Selamat, Siti Rahayu (2017) A New Routing Protocols For Reducing Path Loss In Wireless Body Area Network (WBAN. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1-2). pp. 93-97. ISSN 2180-1843

Alhawari, Khaled Salem and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor and Abdulrazaq, Mohammed Naser (2017) Effect Of Thixoforming On The Wear Properties Of Al-Si-Cu Aluminum Alloy. Jurnal Teknologi , 79 (5-2). pp. 83-87. ISSN 0127-9696

Ali, Mohanad Faeq and Abu, Nor Azman and Harum, Norharyati (2017) A Novel Session Payment System Via Internet Of Things (IOT). International Journal Of Applied Engineering Research, 12 (23). pp. 13444-13450. ISSN 0973-4562

Aminuddin, Nur Shazwani and Mat Ibrahim, Masrullizam and Mohd Ali, Nursabillilah and Ahmad Radzi, Syafeeza and Darsono, Abd Majid and Wong, Yan Chiew (2017) Road triangle detection for non-road area elimination using lane detection and image multiplication. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (2-8). pp. 73-77. ISSN 2180-1843

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Effect of Vaned Diffuser on the Performance of Small Turbocharger. Journal of Mechanical Engineering, SI 1 (1). pp. 227-236. ISSN 1823-5514

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser. Industrial Lubrication And Tribology, 69 (3). pp. 409-413. ISSN 0036-8792

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Mansor, Mohd Radzi and Abdollah, Mohd Fadzli (2017) Experimental Investigation Of Performance And Emissions Of A Stratified Charge CNG Direct Injection Engine With Turbocharger. MATEC Web Of Conferences, 124 (07004). pp. 1-5. ISSN 2261-236X

Ammar, Naji and Sulaiman , Marizan and Mohamad Nor, Ahmad Fateh (2017) Analysis Load Forecasting Of Power System Using Fuzzy Logic And Artificial Neural Network. Journal Of Telecommunication Electronic And Computer Engineering, 9 (3). pp. 181-192. ISSN 2180 – 1843

Anawar, Syarulnaziah and Wan Adnan, Wan Adilah and Ahmad, Rabiah (2017) A Design Guideline For Non-Monetary Incentive Mechanics In Mobile Health Participatory Sensing System. International Journal Of Applied Engineering Research, 12 (21). pp. 11039-11049. ISSN 0973-4562

Ani, Mohammad Firdaus and Kamat, Seri Rahayu and Mohd Ghazali, Athirah (2017) Development Of A Regression Model For Relationship Between Psychophysical And Biomechanics Factors Of Push Activities. Malaysian Journal of Human Factors and Ergonomics, 1 (2). pp. 1-9. ISSN 2590-3705

Ani, Mohammad Firdaus and Kamat, Seri Rahayu and M., Mohamad and Hambali, Ruzy Haryati and Husain, Kalthom (2017) A Study Of Psychophysical Factor (Heart Rate) For Driver Fatigue Using Regression Model. Malaysian Journal of Public Health Medicine 2017, Special Vol. (1), 1. pp. 1-9. ISSN -

Annathurai, Vinodh and Gan, Chin Kim and Ab Ghani, Mohd Ruddin and Baharin, Kyairul Azmi (2017) Impacts of solar variability on distribution networks performance. International Journal Of Applied Engineering Research, 12 (7). pp. 1151-1155. ISSN 0973-4562

Apendai, Luqman and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Hamid, Malek (2017) Computer Mouse Usage Among Computer Gamers And Its Association With Trigger Finger And Carpal Tunnel Syndrome. Human Factors And Ergonomics Journal, 2 (2). pp. 45-47. ISSN 2590-3750

Arif, Sazelin and Sidek, Safiah and Abu Bakar, Nurdinah (2017) Actor-Network Theory (ANT) As An Interpretive Tool To Understand The Use Of Online Technologies : A Review. Asian Journal Of Information Technology, 16. pp. 61-68. ISSN 1682-3915

Arif @ Harip, Afraha Baiti and Munawar, Rose Farahiyan and Abdul Rashid, Muhammad Faiz Haiqal and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi 'Azam and Abd Manaf, Mohd Edeerozey and Ismail, Syahriza and Dimin @ Mohd Amin, Mohd Fairuz and Abdullah, Hazwani Husna (2017) Influence of pulping process conditions towards better water resistant effect of durian shell paper by lignin: Two level factorial design approach. ARPN Journal of Engineering and Applied Sciences, 12 (9). pp. 2743-2750. ISSN 1819-6608

Aziz, N. A. and Abdul Latiff, Anas and Lokman, Muhammad Quisar and Hanafi, Effariza and Harun, Sulaiman Wadi (2017) Zinc Oxide-Based Q-Switched Erbium-Doped Fiber Laser. Chinese Physics Letters, 34 (4). 044202-1. ISSN 0256-307X

Bahar, Mohd Bazli and Too, Jing Wei and Miskon, Muhammad Fahmi and Mohd Sobran, Nur Maisarah and Mohd Shaari Azyze, Nur Latif Azyze (2017) Analysis of spinal EMG signal when swinging an object. International Journal of Applied Engineering Research, 12 (12). pp. 3431-3438. ISSN 0973-4562

Basiron, Halizah and Kasmuri, Emaliana (2017) Subjectivity analysis in opinion mining - A systematic literature review. International Journal Of Advances In Soft Computing & Its Applications (Ijasca), 9 (3). pp. 132-159. ISSN 2074-8523

Basiron, Halizah and Mohd Aboobaider, Burhanuddin and Mohammed, Ali Abdul-Jabbar and Ismail, Ronizam (2017) Internet of things architecture : Current challenges and future direction of research. International Journal Of Applied Engineering Research, 12 (21). pp. 11055-11061. ISSN 0973-4562

Bistamam, Mohd Shahril Amin and Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2017) Surface interaction between carbon patches and catalyst nanoparticle as the key factor in aligned carbon nanotube growth using alcohol catalytic CVD. NANO : Brief Reports and Reviews, 12 (1). pp. 1750012-1. ISSN 1793-2920

Bong, Yu Jing and Kok, Swee Leong (2017) Investigation On Phase Shifting Effect On The Voltage Output Of Piezoelectric Cantilever Array. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-8. ISSN 1757-8981

Bong, Yu Jing and Kok, Swee Leong (2017) Power Optimization Configuration For Piezoelectric Cantilever Arrays. MATEC Web Of Conferences, 108. pp. 1-6. ISSN 2261-236X

Chan, Chee Hoong and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Abu Bakar, Hamizan and Sundi, Syahrul Azwan and Zakaria, Kamarul Ariffin and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Mohd Shahrim, Mohammad Shah All Hafiz (2017) Analysis Of Face Milling Performance On Inconel 718 Using FEM And Historical Data Of RSM. Materials Science And Engineering, 270 (1). pp. 1-11. ISSN 1757-8981

Che Hasan, Mohd Hanif and Md Sam, Yahaya and Aripin, Muhamad Khairi and Harun, Mohamad Haniff and Mohamad @ Abd Rahman, Syahrul Hisham (2017) Implementation Of Robust Composite Nonlinear Feedback For Active Front Steering Based Vehicle Yaw Stability. Jurnal Teknologi, 79 (5-2). pp. 39-43. ISSN 0127-9696

Che Mat, Fauziah and Yasin, Moh and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Graphene Oxide Film As A Passive Q-Switcher In An Erbium-Doped Fiber Laser Cavity. Photonics Letters Of Poland, 9 (3). pp. 100-102. ISSN 2080-2242

Cheah, Yee Mun and Putra, Azma and Muhammad, Noryani and Dullah, Abd Rahman and Jenal, Ruztamreen (2017) Modeling dynamics of a building using a portal frame approach. International Review On Modelling and Simulations, 10 (4). pp. 289-295. ISSN 1974-9821

Cheng, See Yuan and Abdullah, Mohd Azman and Mansor, Shuhaimi (2017) Effect Of Spoiler Angle On The Aerodynamic Performance Of Hatchback Model. International Journal Of Applied Engineering Research, 12 (22). pp. 12927-12933. ISSN 0973-4562

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Abdullah, Lokman and Rafan, Nur Aidawaty (2017) Design of super twisting algorithm for chattering suppression in machine tools. International Journal Of Control, Automation And Systems, 15 (3). pp. 1259-1266. ISSN 1598-6446

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Abdullah, Lokman and Rafan, Nur Aidawaty and Maharof, M (2017) Second order sliding mode control for direct drive positioning system. Journal of Mechanical Engineering and Sciences (JMES), 11 (4). pp. 3206-3216. ISSN 2289-4659

Chong, Chee Soon and Ghazali, Rozaimi and Jaafar, Hazriq Izzuan and Syed Hussein, Syarifah Yuslinda and Md Rozali, Sahazati (2017) Robustness Analysis Of An Optimized Controller Via Particle Swarm Algorithm. Advanced Science Letters, 23 (11). pp. 11187-11191. ISSN 1936-6612

Chong, Chee Soon and Ghazali, Rozaimi and Jaafar, Hazriq Izzuan and Syed Hussien, Sharifah Yuslinda (2017) Sliding Mode Controller Design With Optimized PID Sliding Surface Using Particle Swarm Algorithm. Procedia Computer Science, 105. pp. 235-239. ISSN 1877-0509

Chong, Shin Horng and Chan, Chun Yuan and Sato, Kaiji and Sakthi Velu, Vasanthan and Loh, Ser Lee (2017) Modified-PID Control With Feedforward Improvement For 1-Degree-Of-Freedom Pneumatic Muscle Actuated System. Jurnal Teknologi, 79 (5-2). pp. 51-57. ISSN 0127-9696

Chong, Shin Horng and Tang, Teng Fong and Mohd Nor, Rozilawati (2017) Practical Controller Design For Ultra-Precision Positioning Of Stages With A Pneumatic Artificial Muscle Actuator. IOP Conference Series: Materials Science and Engineering, 210. pp. 1-13. ISSN 1757-899X

Chow, Khoon Keat and Kok, Swee Leong and Lau, Kok Tee (2017) Experimental Evaluation Of Impact Based Flexible Piezoelectric P (VDF-TrFE) Thick-Film. Proceedings Of Mechanical Engineering Research Day 2017. pp. 303-304. ISSN -

Chow, Khoon Keat and Kok, Swee Leong and Lau, Kok Tee (2017) An Experimental Investigation Of Piezoelectric P (VDF-TrFE) Thick Film On Flexible Substrate As Energy Harvester. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-6. ISSN 1757-899X

Dabas, Nurayati and Bakri, Mohammed Hariri and Mohamad Sharif, Sabri and Ismail, Shafinar (2017) The factors influencing securitization performance in Malaysia. Advanced Science Letters, 23 (8). pp. 7927-7930. ISSN 1936-6612

Daud, Rafizah and Salam, Sazilah and Mohamad, Siti Nurul Mahfuzah and Mohd Yusoff, Azizul (2017) Modeling a mobile gamification model to increase student engagement: an analysis using analytic hierarchy process. Advanced Science Letters, 23 (9). pp. 8707-8712. ISSN 1936-6612

Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan (2017) Thermoplastic matrix selection for fibre metal laminate using fuzzy VIKOR and entropy measure for objective weighting. Journal of Engineering Science and Technology, 12 (10). pp. 2792-2804. ISSN 2792 - 2804

Dhar Malingam, Sivakumar and Ng, Lin Feng and Lau, S. M. and Lim, K. T. (2017) Fatigue life behaviour of glass/kenaf woven-ply polymer hybrid biocomposites. Journal of Polymers and the Environment, 26 (2). pp. 499-507. ISSN 1566-2543

Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Ab Ghani, Ahmad Fuad and Jumaat, Faizal Azli (2017) Tensile And Impact Properties Of Cost-Effective Hybrid Fiber Metal Laminate Sandwich Structures. Advances in Polymer Technology, 37 (7). pp. 2385-2393. ISSN 0730-6679

Dhar Malingam, Sivakumar and Pilvamangalam, Nisallini and Bapokutty, Omar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Quasi-static indentation behaviour of kenaf bast fibre reinforced metal laminate system. Defence S &T Technical Bulletin, 10 (3). pp. 258-271. ISSN 1985-6571 (Submitted)

Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Investigation on Fatigue Life Behaviour of Sustainable Bio-Based Fibre Metal Laminate. Journal of Mechanical Engineering, SI 1 (1). pp. 123-140. ISSN 1823-5514

Draman @ Muda, Azah Kamilah and Pratama, Satrya Fajri and Choo, Yun Huoy and Flusser, Jan and Abraham, Ajith (2017) ATS drugs molecular structure representation using refined 3D geometric moment invariants. Journal of Mathematical Chemistry, 55 (10). pp. 1951-1963. ISSN 0259-9791

Duraisamy, Navaneethan and Karuppiah, Rajammal and Kasi, Ramesh and T. Subramaniam, Ramesh and Dhar Malingam, Sivakumar (2017) Na-doped LiMnPO4 as an electrode material for enhanced lithium ion batteries. Bulletin of Materials Science, 40 (1). pp. 171-175. ISSN 0250-4707

Ebrahim, Zuhriah and Abdul Rasib, Amir Hamzah (2017) Unnecessary overtime as a component of time loss measures in assembly processes. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 37-47. ISSN 1985-3157

Fam, Soo Fen and Ismail, Noriszura and Jemain, Abdul Aziz (2017) Geographical And Socioeconomic Analysis In Peninsular Malaysia. The Social Sciences, 12 (9). pp. 1695-1704. ISSN 1818-5800

Fam, Soo Fen and Soo, Jia Hui and Wahjono, Sentot Imam (2017) Online Job Search Among Millennial Students In Malaysia. Jurnal Dinamika Manajemen, 8 (1). pp. 1-10. ISSN 2086-0668

Fatheli, Mohamad Haireen and Zolkifri, Nur Izzati and Gan, Chin Kim and Yusup Lada, Musa (2017) Development Of Load Control Algorithm For PV Microgrid. International Journal Of Electrical And Computer Engineering (IJECE), 7 (2). pp. 619-630. ISSN 2088-8708

Fauzi, Nur Faiqah and Mohamad Jaya, Abdul Syukor and Mohammad Jarrah, Mu’ath Ibrahim and Akbar, Habibullah (2017) Thin Film Roughness Optimization In The Tin Coatings Using Genetic Algorithms. Journal Of Theoretical And Applied Information Technology, 95 (24). pp. 6690-6698. ISSN 1992-8645

Feroz, Farah Shahnaz and Leicht, Gregor and Steinmann, Saskia and Andreou, Christina and Mulert, Christoph (2017) The Time Course Of Activity Within The Dorsal And Rostral-Ventral Anterior Cingulate Cortex In The Emotional Stroop Task. Brain Topography, 30 (1). pp. 30-45. ISSN 0896-0267

Gannapathy, Vigneswara Rao and Lim, Kim Chuan and Siva Kumar, Subramaniam and Zahriladha, Zakaria (2017) A REVIEW OF MULTIHOP BASED MEDIUM ACCESS CONTROL (MAC) PROTOCOL TO TACKLE BOTH MULTIPLE ACCESS AND MULTIHOP ISSUES IN WIRELESS MESH NETWORK (WMN). International Journal of Research in Engineering and Technology (IJRET). pp. 46-52. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Gannapathy, Vigneswara Rao and Lim, Kim Chuan and Siva Kumar, Subramaniam and Zahriladha, Zakaria and Mohamad Kadim , Suaidi (2017) A SURVEY OF CONTENTION BASED MEDIUM ACCESS CONTROL (MAC) PROTOCOLS IN WIRELESS LAN. International Journal of Research in Engineering and Technology (IJRET), 06 (11). pp. 39-45. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Ghazali, Rozaimi and Saad, Mohammad Zyzerull and Syed Hussien, Sharifah Yuslinda and Jali, Mohd Hafiz and Zohedi, Fauzal Naim and Ahmad Izzuddin, Tarmizi (2017) Intelligent Controller Design For Multifunctional Prosthetics Hand. International Journal Of Mechanical Engineering And Robotics Research, 6 (6). pp. 495-501. ISSN 2278-0149

Goh, Siew Yun and Kok, Swee Leong (2017) Optimization Of Electrical Energy Harvesting From Focused Infrared Light Using Thermoelectric Module With Uniform Heat Distribution. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3). pp. 105-110. ISSN 2180-1843

Goh, Siew Yun and Kok, Swee Leong (2017) Self-Powered Thermoelectric Based Cooling System For LCD Panel. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-13). pp. 35-38. ISSN 2180-1843

Habban, Mohd Faiz and Manap, Mustafa and Abdullah, Abdul Rahim and Jopri, Mohd Hatta (2017) An Evaluation Of Linear Time Frequency Distribution Analysis For Vsi Switch Faults Identification. International Journal Of Power Electronics And Drive Systems (Ijpeds), 8 (1). p. 31. ISSN 2088-8708

Hairol Nizam , Mohd Shah and Marizan, Sulaiman and Ahmad Zaki , Shukor and Mohd Zamzuri, Ab Rashid (2017) Recognition Of Butt Welding Joints Using Background Subtraction Seam Path Approach For Welding Robot. International Journal Of Mechanical & Mechatronic Engineering (Ijmme), 17 (1). pp. 57-62. ISSN 2227-2771

Haji Azlan, Umar Al-Amani and Mohd Noor, Ahmad Fauzi (2017) A Study On Structural Stability Of Bismuth Titanate With Lanthanum Doping For Improved Ferroelectric Properties. Bulletin Of Materials Science, 40 (230). pp. 1-6. ISSN 0250-4707

Halim, Isa and Radin Umar, Radin Zaid and Ahmad, Nadiah and Abdul Rahim, Ruslinda and Zakaria, Nurul Farahizzati (2017) Conceptual Design Of Shielded Metal Arc Welding Workstation: Work Posture And Bead Dimension Consideration. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 19-32. ISSN 1985-3157

Hamzah, Rostam Affendi and Ibrahim, Haidi and Abu Hassan, Anwar Hasni (2017) Stereo Matching Algorithm Based On Per Pixel Difference Adjustment, Iterative Guided Filter And Graph Segmentation. Journal Of Visual Communication And Image Representation, 42. pp. 145-160. ISSN 1047-3203

Hamzah, Rostam Affendi and Kadmin, Ahmad Fauzan and Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Salam, Saifullah (2017) Disparity Refinement Process Based On Ransac Plane Fitting For Machine Vision Applications. Journal Of Fundamental And Applied Sciences, 9 (4S). pp. 226-237. ISSN 1112-9867

Haroon, Hazura and Abdul Razak, Hanim and Khalid, Siti Sarah and N., Nadia and A., Aziz (2017) On The Effectiveness Of Taguchi Method In Optimizing The Performance Of Parallel Cascaded MRR Array (PCMRRA). Optoelectronics And Advanced Materials – Rapid Communications, 11 (7-8). pp. 393-397. ISSN 1842-6573

Haroon, Hazura and Khalid, Siti Sarah (2017) An Overview Of Optical Fiber Sensor Applications In Liquid Concentration Measurements. Journal Of Advanced Review On Scientific Research, 36 (1). pp. 1-7. ISSN 2289-7887

Harun, Mohamad Hafiz and Zahmani, Qamar Fairuz and Hudha, Khisbullah and Sariman, Mohd Zahar and Harun, Mohd Hanif and Ahmad, Fauzi and Azhari, Muhamad Azwar (2017) Stability Enhancement Of Railway Vehicle Dynamics Performance In Lateral Direction Using Fuzzy Bogie-Based Skyhook Control. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4219-4224. ISSN 1819-6608

Harun, Sulaiman Wadi and Pinninty, Harshavardhan Reddy and Paul, Mukul Chandra and Das, Shyamal K. and Dhar, Anirban and Abd Kadir, Noraniza and Ismail, Ezzatul Irradah and Abdul Latiff, Anas (2017) Erbium-doped zirconia-alumina silica glass-based fiber as a saturable absorber for high repetition Rate Q-switched all-fiber laser generation. Chinese Physics Letters, 34 (8). 084203-1-084203-4. ISSN 0256-307X

Hasan, Hayfaa Mohammed Hussein and Sulaiman, Marizan and Omar, Rosli and Mohd Aras, Mohd Shahrieel (2017) Effect Of Double Fuzzy Logic Controller (DFLC) Based On Power System Stabilizer (PSS) On A Tie- Line Two Generators System. ARPN Journal Of Engineering And Applied Sciences, 12 (21). pp. 6130-6139. ISSN 1819-6608

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Decision support system classification and its application in manufacturing sector: A review. Jurnal Teknologi, 79 (1). pp. 153-163. ISSN 0127-9696

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Sustainable-ERP system: A preliminary study on sustainability indicators. Journal Of Advanced Manufacturing Technology, 11 (1(SI)). pp. 61-73. ISSN 1985-3157

Hashim, Hanizam and Mohamad, Noraiham and Azlan, Umar Al-Amani and Mohd Ahyan, Muhammad Qamaruddin (2017) Process Optimization Of EDM Cutting Process On Tool Steel Using Zinc Coated Electrode. MATEC Web Of Conferences, 97. pp. 1-5. ISSN 2261-236X

Hashim, Hasmaini and Salam, Sazilah and Mohamad, Siti Nurul Mahfuzah (2017) Investigating Learning Styles For Adaptive Massive Open Online Course (MOOC) Learning. Journal Of Advances In Humanities And Social Sciences, 3 (5). pp. 282-292. ISSN 2519-0415

Hashim, Hasmaini and Salam, Sazilah and Mohamad, Siti Nurul Mahfuzah and Cheong, Kar Mee and Tan, Poh Ee (2017) Analysis Of Student Performance Using Massive Open Online Courses As Blended Learning Approach In Learning Second Language. Proceedings Of Mechanical Engineering Research Day 2017. pp. 296-298. ISSN -

Hashim, Nurul Akmal and Zainal Abidin, Zaheera and Shibghatullah, Abdul Samad (2017) Iris Feature Detection Using Split Block And PSO For Iris Identification System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1-2). pp. 99-102. ISSN 2180-1843

Hashim, Ummi Rabaah and Draman @ Muda, Azah Kamilah and Kanchymalay, Kasturi and Abdul Jalil, Intan Ermahani and Othman, Muhammad Hakim and Mohd Hashim, Siti Zaiton (2017) Single class classifier using FMCD based non-metric distance for timber defect detection. International Journal Of Advances In Soft Computing And Its Applications, 9 (3). pp. 199-216. ISSN 2074-8523

Hashim, Ummi Rabaah and Draman @ Muda, Azah Kamilah and Kanchymalay, kasturi and A. Jalil, Intan Ermahani and Mohd Hashim, Siti Zaiton and Othman, Muhammad Hakim (2017) Systematic feature analysis on timber defect images. International Journal Of Advances In Intelligent Informatics, 3. pp. 56-67. ISSN 2442-6571

Hashim, Ummi Rabaah and Kanchymalay, kasturi and Salim, Naomie and Sukprasert, Anupong and Krishnan, Ramesh (2017) Multivariate Time Series Forecasting Of Crude Palm Oil Price Using Machine Learning Techniques. IOP Conference Series: Materials Science And Engineering, 226. pp. 1-9. ISSN 1757-8981

Hasim, Norhaslinda and Chong, Shin Horng and Ibrahim, Zulkifilie (2017) CM NCTF With Velocity Feedforward Controller Design For Tracking Control Of An AC Driven X-Y Ball Screw Mechanism. Communications In Computer And Information Science, 752. pp. 149-159. ISSN 1865-0929

Hassan, Ali Abdul Hussian and Md Shah, Wahidah and Jabbar Mohammed, Ali Abdul and Othman, Mohd Fairuz Iskandar (2017) Clustering Methods For Cluster-Based Routing Protocols In Wireless Sensor Networks: Comparative Study. International Journal Of Applied Engineering Research, 12 (21). pp. 11350-11360. ISSN 0973-4562

Hassan, Nornikman and Noor Azizi, Muhammad Syafiq and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Abu Bakar, Hamizan and Ramli, Mohamad Hafize and Othman, Mohd Azlishah and Sulaiman, Hamzah Asyrani (2017) Rectangular Microstrip Patch Antenna With Different Location Of Minkowski Island Split Ring Resonator (MI-SRR) Structure. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-5). pp. 13-16. ISSN 2180-1843

Hisamuddin, N. and Jusoh, Zulzilawati and Zakaria, U. N. and Zulkifli, Mohd Zamani and Abdul Latiff, Anas and Yasin, Moh and Ahmad, Harith and Harun, Sulaiman Wadi (2017) Q-Switched Raman Fiber Laser With Titanium Dioxide Based Saturable Absorber. Optoelectronics And Advanced Materials – Rapid Communications, 11 (3-4). pp. 127-130. ISSN 1842-6573

Hisyam, Mohamad Badrol and Mohd Rusdi, Muhammad Farid and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Generation Of Mode-Locked Ytterbium Doped Fiber Ring Laser Using Few-Layer Black Phosphorus As A Saturable Absorber. IEEE Journal Of Selected Topics In Quantum Electronics, 23 (1). p. 1100205. ISSN 1077-260X

Ibrahim, Khairul Anwar and Au, Mau Teng and Gan, Chin Kim and Tang, Jun Huat (2017) System Wide MV Distribution Network Technical Losses Estimation Based On Reference Feeder And Energy Flow Model. International Journal Of Electrical Power And Energy Systems, 93. pp. 440-450. ISSN 0142-0615

Ishak, Nazila and Waini, Iskandar and Mohamed, Muhammad Khairul Anuar and Rosli, Norhayati and Salleh, Mohd Zuki (2017) Numerical Solution On MHD Flow And Heat Transfer For The Upper-Convected Maxwell Fluid Over A Stretching/Shrinking Sheet. Jurnal Karya Asli Lorekan Ahli Matematik, 10 (1). pp. 1-13. ISSN 1985-5222

Jabar, Juhaini and Abdul Karim, Mohd Haradzi and Mohd. Yusof, Sitinor Wardatulaina and Ahmad Murad, Murzidah and Abdul Khalid, Fararishah (2017) Adoption Attitude Towards The Usage Of Pusher Box Technology In The Rubber Industry. Advances In Social Sciences Research Journal, 4 (4). pp. 1-9. ISSN 2055-0286

Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Chong, Chee Soon and Zohedi, Fauzal Naim (2017) Robust Controller Design With Particle Swarm Optimization For Nonlinear Prosthetic Hand System. International Journal Of Mechanical Engineering And Robotics Research, 6 (5). pp. 406-412. ISSN 2278-0149

Jali, Mohd Hafiz and Hamdani, Muhammad Faris and Zohedi, Fauzal Naim and Ghazali, Rozaimi (2017) System Identification And Fuzzy Logic Controller Design For Prosthetic Hand System. Journal Of Engineering Science And Technology, 12. pp. 52-63. ISSN 1823-4690

Jamaludin, Irma Wani and Abdul Wahab, Norhaliza (2017) Recursive Subspace Identification Algorithm Using The Propagator Based Method. Indonesian Journal Of Electrical Engineering And Computer Science, 6 (1). pp. 172-179. ISSN 2502-4752

Jamaludin, Zamberi and Huong, Yu Chung and Abdullah, Lokman (2017) Radio Frequency Identification Based System Design For Logistics Application. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 17-20. ISSN 2180-1843

Jidin, Aiman Zakwan and Lim, Siau Li and Kadmin, Ahmad Fauzan (2017) Implementation Of Algorithm For Vehicle Anti-Collision Alert System In FPGA. International Journal of Electrical and Computer Engineering (IJECE), 7 (2). pp. 775-783. ISSN 2088-8708

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Habban, Mohd Faiz (2017) An Accurate Classification Method Of Harmonic Signals In Power Distribution System By Utilising S-Transform. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (11). pp. 1-8. ISSN 1693-6930

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Yusoff, Mohd Rahimi (2017) A Fast Localization Of Multiple Harmonic Sources For Rectifier Loads By Utilizing Periodogram. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (1). pp. 1001-1008. ISSN 1693-6930

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Yusoff, Mohd Rahimi (2017) A Utilisation Of Improved Gabor Transform For Harmonic Signals Detection And Classification Analysis. International Journal Of Electrical And Computer Engineering (ijece), 7 (1). pp. 31-39. ISSN 2088-8708

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Yusoff, Mohd Rahimi and Habban, Mohd Faiz (2017) An Improved Detection And Classification Technique Of Harmonic Signals In Power Distribution By Utilizing Spectrogram. International Journal Of Electrical And Computer Engineering (Ijece), 7 (1). pp. 31-39. ISSN 2088-8708

Jumaidin, Ridhwan and Sapuan, S. M. and Jawaid, Mohamad and Ishak, M. R. and Sahari, Japar (2017) Characteristics of Eucheuma cottonii waste from East Malaysia: physical, thermal and chemical composition. European Journal of Phycology, 52 (2). pp. 200-207. ISSN 0967-0262

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Japar, Sahari (2017) Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites. International Journal of Biological Macromolecules. pp. 606-615. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2017) Effect of Agar on Flexural, Impact, and Thermogravimetric Properties of Thermo- plastic Sugar Palm Starch. Current Organic Synthesis. pp. 200-205. ISSN 1570-1794

Kadir, N. A. A. and Ismail, E. I. and Abdul Latiff, Anas and Ahmad, H. and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Transition Metal Dichalcogenides (WS2 And MoS2) Saturable Absorbers For Mode-Locked Erbium-Doped Fiber Lasers. Chinese Physics Letters, 34 (1). 014202-1. ISSN 0256-307X

Kamarul Ariffin, Zakaria and Ad Suhadak, Fadrah Hanim and Mohd Razalli, Ammer Ezhar and Kassim, M.S (2017) Fatigue Damage Analysis Of Automobile Steering Knuckle Using Finite Element Analysis. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4225-4228. ISSN 1819-6608

Kamat, Seri Rahayu and Md Zula, Nur Emelia Natasha and Rayme, Nur Syafiqah and Shamsuddin, Syamimi and Husain, K. (2017) The Ergonomics Body Posture On Repetitive And Heavy Lifting Activities Of Workers In Aerospace Manufacturing Warehouse. IOP Conference Series: Materials Science And Engineering, 210 (1). pp. 1-12. ISSN 1757-8981

Kamat, Seri Rahayu and Nordin, Eezsafauzia Azalin and Husain, Kalthom and Syed Ali, Sharifah Aznee (2017) Investigation Of Musculoskeletal Disorders Among Workers In Food Services (Cafeteria). Human Factors and Ergonomics Journal, 2 (3). pp. 27-33. ISSN 2590-3705

Karyono, Giat and Asmai, Siti Azirah and Ahmad, Asmala (2017) Survey On Nudity Detection: Opportunities And Challenges Based On ‘Awrah Concept In Islamic Shari’a. Journal of Theoretical and Applied Information Technology, 95 (15). pp. 3450-3460. ISSN 1992-8645

Kassim, Dg Hafizah and Putra, Azma and Mohd Nor, Mohd Jailani and Hamzah, Ain Nur Haznida (2017) Preliminary Study Of Acoustical Treatment In A Scaled Model Mosque. International Review Of Mechanical Engineering (IREME), 11 (4). pp. 222-227. ISSN 1970-8734

Khamis, Alias and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Dahlan, Nurfaezatul Aqma (2017) Modeling and analysis microturbine and battery storage system microgrid system based on green energy. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-7). pp. 89-94. ISSN 2180-1843

Khamis, Aziah and Mohd Aras, Mohd Shahrieel and Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Mohd Zambri, Mohd Khairi and Ahmad, Azhar and Nor Rahim, Mohd Akmal Hakim (2017) Design And Analysis Of Diesel Generator With Battery Storage For Microgrid System. International Journal Of Advanced Engineering Research And Technology (IJAERT), 5 (3). pp. 26-32. ISSN 2348-8190

Khamis, Aziah and Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Ahmad, Azhar and Jaafar, Azri (2017) Analysis Of Wind With Battery Connected To Microgrid System. International Journal Of Advanced Engineering Research And Technology (IJAERT), 5 (3). pp. 40-45. ISSN 2348-8190

Khamis, Noorli and Abdullah, Imran Ho (2017) Lexical Features Of Engineering English Vs. General English. Gema Online® Journal Of Language Studies, 17. pp. 106-119. ISSN 1675-8021

Lee, Shing Chuan and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli (2017) Tribological Performance Of Low Blend Decanter Cake Biodiesel. Industrial Lubrication And Tribology, 69 (3). pp. 425-432. ISSN 0036-8792

Liew, Pay Jun and Hashim, Umira Syafika and Abd Rahman, Md Nizam (2017) Effect Of Chilled Air Coolant On Surface Roughness And Tool Wear When Machining 2205 Duplex Stainless Steel. Journal of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 61-68. ISSN 1985-3157

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Che Sidik, Nor Azwadi and Yan, Jiwang (2017) An Overview Of Current Status Of Cutting Fluids And Cooling Techniques Of Turning Hard Steel. International Journal of Heat and Mass Transfer, 114 (-). pp. 380-394. ISSN 0017-9310

Liew, Weng Tack and Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina (2017) Structural And Electronic Properties Of Transition-Metal Oxides Attached To A Single-Walled CNT As A Lithium-Ion Battery Electrode : A First-Principles Study. American Chemical Society, 121 (-). pp. 2636-2642. ISSN 2636−2642

M. Yusoff, Z. and A. Aziz, M. A. and Razali, N. F. and Nordin, S. A. and Zainal Abidin, Amar Faiz and Zain, N. M. (2017) The Study Of Dynamic Response Using ARX Model In Extraction Process. Journal Of Fundamental And Applied Sciences, 9 (4S). pp. 145-159. ISSN 1112-9867

Mahamood, Mazlin Aida and Mohamad, Noraiham and Abd Razak, Jeefferie and Mohd Zain, Amirul Hakimi and Shueb, Mohammed Iqbal and Ab Maulod, Hairul Effendy (2017) Correlation Of Open Cell Structure With Properties Of Green Rubber Foam From Epoxidised Natural Rubber/Reclaimed Rubber Glove. Journal of Mechanical Engineering, S1 (1). pp. 113-122. ISSN 1823- 5514

Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792

Mahyuddin, Mohamad Badrol Hisyam and Abdul Latiff, Anas and Mohd Rusdi, Muhammad Farid and Irawati, Ninik and Harun, Sulaiman Wadi (2017) Quantum Dot Cadmium Selenide As A Saturable Absorber For Q-Switched And Mode-Locked Double-Clad Ytterbium-Doped Fiber Lasers. Optics Communications, 397. pp. 147-152. ISSN 0030-4018

Maliki, Ardinaldi and Chew, Boon Cheong and Abdul Rashid, Nurulizwa (2017) Challenges In Re-Engineering The New Product Development On Bieichi Technology. Proceedings Of Mechanical Engineering Research Day 2017, 2017. pp. 204-206. ISSN -

Mansor, Nik Fakhri and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Hamid, Malek (2017) Digital Eye Strain Evaluation Among Video Gamers With And Without Blue Light Monitor Filter. Human Factors And Ergonomics Journal, 2 (2). pp. 41-44. ISSN -

Masni-Azian, Akiah and Masao, Tanaka (2017) Statistical factorial analysis approach for parameter calibration on material nonlinearity of intervertebral disc finite element model. Computer Methods in Biomechanics and Biomedical Engineering,. pp. 1-10. ISSN 1025-5842

Masrukin, Yully Erwanti and Zakaria, Zahriladha and Sam, Weng Yik and Sadick Ali, Nur Shaheera Alia (2017) A Novel Of Dual-Band Bandpass Filter Employing Coupled Stepped Impedance Resonator And U-Shaped Defected Microstrip Structure (DMS). International Journal On Communications Antenna and Propagation (IRECAP), 7 (3). pp. 1-7. ISSN 2039 – 5086

Mat Harttar, Maziati Akmal and Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Azmi, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, Mohd Shahir (2017) Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique. Ceramics International, 44. pp. 317-325. ISSN 0272-8842

Mat Noor, Noraina Alia and Abd Razak, Jeefferie and Ismail, S. and Mohamad, N. and Yaakob, M. Y. and T. H., Theng (2017) Influence Of MWCNTs Addition On Mechanical And Thermal Behavior Of Epoxy/Kenaf Multi-Scale Nanocomposite. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-10. ISSN 1757-899X

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792

Mazlan, Mazliah and Mohamad, Noraiham and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Othman, Intan Sharhida and Hashim, Hanizam and Mohd Abid, Mohd Asyadi 'Azam and Ahsan, Qumrul and Mohd Safeai, Nur Maizatul Nadia and Mohd Mef’at, H. (2017) Weight Loss By Soil Burial Degradation Of Green Natural Rubber Vulcanizates Modified By Tapioca Starch. Proceedings Of Mechanical Engineering Research Day 2017. pp. 405-407. ISSN -

Mazlan, Mohammad Hanif and Ahmad, Badrul Hisham and Husain, Mohd Nor and Zakaria, Zahriladha and Shairi, Noor Azwan and Zahari, Mohd Khairy and Hassan, Nornikman (2017) Design And Analysis Of SIW Bandstop Filters For Interference Suppression In X Band. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-5). pp. 1-5. ISSN 2180-1843

Mazlan, Nurulhasanah and Syed Ahmad, Sharifah Sakinah and Kamalrudin, Massila (2017) Volunteer Selection Based On Crowdsourcing Approach. Journal Of Ambient Intelligence And Humanized Computing. pp. 1-11. ISSN 1868-5137

Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Redzuwan, Bahrin Ikram and Muhammad Zaimi, Zainal Abidin and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mizobuchi, Akira and Ishida, Tohru (2017) Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools. Jurnal Teknologi , 79 (5-2). pp. 101-104. ISSN 2180-3722

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659

Md Ghazaly, Mariam and Abdullah, Zulkeflee and Md Ali, Mohd Amran and Che Amran, Aliza and Chong, Shin Horng (2017) Trajectory Tracking Of A Mobile Robot System. Journal of Mechanical Engineering, S1 (1). pp. 207-226. ISSN 1823-5514

Md Ghazaly, Mariam and Ho, Carl Choon and Jamaludin, Irma Wani and Soo, Kok Yew and Yaacob, Mohd Rusdy and Abdullah, Zulkeflee and Md Ali, Mohd Amran (2017) Parameter Analysis Of A Remotely Controlled Home Monitoring System Using Mobile Robot Via Camera. Jurnal Teknologi, 79 (2). pp. 81-88. ISSN 0127-9696

Md Ghazaly, Mariam and Yeo, Chin Kiat and Chong, Shin Horng and Yusri, I and Tee, Siau Ping (2017) Parameter Optimization Of A Tubular Linear Type Reluctance Motor For High Thrust Force. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9. pp. 117-120. ISSN 2180-1843

Md Isa, Mohamed Hafiz and Tee, Boon Tuan and Zakaria, Muhammad Zulfattah and Zulkafli, Nur Izyan and Rivai, Ahmad and Ab Razak, Juhari and Yusof, Ahmad Anas (2017) Emission Inventory For Area Source: Case Study In Majlis Bandaraya Melaka Bersejarah (MBMB) Region. International Journal Of Environment, Society & Space (IJESS), 5 (2). pp. 9-17. ISSN 2289-5299

Md Isa, Mohamed Hafiz and Zakaria, Muhammad Zulfattah and Abdul Munajat, Nurain and Abu Bakar, Fateh Sakinah and Haron, Muhammad Asyraf (2017) Cleaner Production Implementation At Chicken Slaughtering Plant. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4324-4328. ISSN 1819-6608

Md Saat, Mohd Shakir and Yusop, Yusmarnita and Abd Ghani, Zamre and Husin, Siti Huzaimah and Rahman, F.K.A. (2017) A Modified Class-Eπ1b For Capacitive Power Transfer System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-13). pp. 87-92. ISSN 2180-1843

Md Yunos, Norhazwani and Shurbevski, Aleksandar and Nagamochi, Hiroshi (2017) An Improved-Time Polynomial-Space Exact Algorithm For TSP In Degree-5 Graphs. Journal Of Information Processing, 25. pp. 639-654. ISSN 0387-5806

Md Yusop, Azdiana and Mohamed, Ramizi and Ayob, Afida and Mohamed, Azah (2017) Shapeable Maximum-Power Point-Tracking Algorithm To Improve The Stability Of The Output Behavior Of A Thermoelectric-Solar Hybrid Energy-Harvesting System. Journal Of The Association Of Arab Universities For Basic And Applied Sciences, 22. pp. 1-8. ISSN 1815-3852

Misha, Suhaimi and Ahmed Al-Qadhi, Ahmed Abdullah and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid (2017) Design And Simulation Of An Optimized Mixed Mode Solar Dryer Integrated With Desiccant Material. International Journal of Mechanical & Mechatronics Engineering , 17. pp. 65-73. ISSN 2077-124X (online) 2227-2771 (Print)

Miskon, Muhammad Fahmi (2017) Robotics Education_Emerging Trend in Technology Education. TECHIES. pp. 20-21. ISSN 0128-1313

Mohamad, Noraiham and Yaakub , Juliana and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Yaakob, Mohd Yuhazri and Lau, Kok Tee and Ahsan, Qumrul and Shueb, Mohammed Iqbal and Othman, R. (2017) Vibrational Damping Behaviors Of Graphene Nanoplatelets Reinforced NR/EPDM Nanocomposites. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3274-3287. ISSN 2289-4659

Mohamad, Siti Nurul Mahfuzah and Salam, Sazilah and Bakar, Norasiken (2017) An analysis of gamification elements in online learning to enhance learning engagement. Proceedings Of The 6th International Conference On Computing And Informatics, ICOCI 2017and Informatics, ICOCI 2017, 041. pp. 452-460. ISSN 2289-7402

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Mohamad Kamal, Mohamad Ridzuan and Abdul Rahman, Abdul Raheem and Wakhi Anuar, Nur Farah Bazilah and Salleh, Mohd Shukor (2017) Effect Of Coating Thickness On The Microstructure And Mechanical Properties Of AL-SI (LM6) Alloy Lost Wax Casting. Journal Of Mechanical Engineering, SI (3) (1). pp. 97-106. ISSN 1823- 5514

Mohamad Nor, Ahmad Fateh and Sulaiman , Marizan and Abdul Kadir, Aida Fazliana and Omar, Rosli (2017) Classifications Of Voltage Stability Margin (VSM) And Load Power Margin (LPM) Using Probabilistic Neural Network (PNN). ARPN Journal Of Engineering And Applied Sciences, 12 (19). pp. 5591-5596. ISSN 1819-6608

Mohamad Nor, Ahmad Fateh and Sulaiman , Marizan and Abdul Kadir, Aida Fazliana and Omar, Rosli (2017) Voltage Stability Analysis Of Load Buses In Electric Power System Using Adaptive Neuro-Fuzzy Inference System (Anfis) And Probabilistic Neural Network (Pnn). ARPN Journal Of Engineering And Applied Sciences, 12 (5). pp. 1406-1412. ISSN 1819-6608

Mohamad Yuden, Mohamad Adzeem and Md Ghazaly, Mariam and Che Amran, Aliza and Jamaludin, Irma Wani and Khoo, Hui Yee and Yaacob, Mohd Rusdy and Abdullah, Zulkeflee and Yeo, Chin Kiat (2017) Positioning Control Performances Of A Robotic Hand System. Jurnal Teknologi, UTM, 79 (1). pp. 25-33. ISSN 0127-9696

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2017) Loudness Perception Differentiation Using Repeating Sinus Rhythm. MALTESAS Multi-Disciplinary Research Journal (MIRJO), 2 (3). pp. 47-54. ISSN 0127-6271

Mohamed Noor, Ahamad Zaki and Md Fauadi, Muhammad Hafidz Fazli and Jafar , Fairul Azni and Zainudin, Siti Fairus (2017) Fusion of Fuzzy AHP in selecting material for drinking water bottle based on customer needs. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4243-4249. ISSN 1819-6608

Mohammad Rawi, Ali Hafizar and Abdullah, Norida and Shamshul Al Kamal, Siti Nurul Suhada (2017) Hubungan Antara Jenis Komunikasi Dan Gaya Asuhan Ibu Bapa Terhadap Tingkah Laku Devian Remaja: Kajian Literatur (Relationship Between The Type Of Communication And Parenting Style Towards Teen Deviant Behaviour: A Literature Review). Journal Of Human Capital Development (JHCD), 10 (7). pp. 55-68. ISSN 1985-7012

Mohammed, Mazin Abed and Abd. Ghani, Mohd Khanapi and Hamed, Raed Ibraheem and Ibrahim, Dheyaa Ahmed (2017) Review On Nasopharyngeal Carcinoma: Concepts, Methods Of Analysis, Segmentation, Classification, Prediction And Impact: A Review Of The Research Literature. Journal Of Computational Science, 21. pp. 283-298. ISSN 1877-7503

Mohammed Al-Dabas, Sari Abdo Ali and Miskon, Muhammad Fahmi and Shukor, Ahmad Zaki and Bahar, Mohd Bazli and Mohammed, Marwan Qaid Abdulrazzaq (2017) Review on application of haptic in robotic rehabilitation technology. International Journal of Applied Engineering Research, 12 (12). pp. 3204-3213. ISSN 0973-4562

Mohammed Hussein Hasan, Hayfaa and Sulaiman , Marizan and Jubair Al-Hiealy, Mohammed Rasheed and Omar, Rosli and Mohd Aras, Mohd Shahrieel and Mohamad Nor, Ahmad Fateh (2017) Stability Studies Of Fuzzy Logic Based Power System Stabilizer In Enhancing Dynamic Stability Of A Two Generators Tie-Line System. ARPN Journal Of Engineering And Applied Sciences, 12 (5). pp. 1662-1669. ISSN 1819-6608

Mohd Ab Halim, Mohd Firdaus and Azlan, Umar Al-Amani and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Manap, Mustafa and Johari, Siti Halma and Abdullah, Abdul Rahim and Hushim, Mohd Faisal (2017) Lighting Retrofit Scheme Economic Evaluation. Indonesian Journal Of Electrical Engineering And Computer Science, 5 (3). 496 - 501. ISSN 2502-4752

Mohd Abid, Mohd Asyadi 'Azam and Raja Seman, Raja Noor Amalina and Mohamed Effendi, Salmi (2017) Preparation Of Hydrous Ruthenium Oxide/Activated Carbon Electrode And Its Supercapacitive Performance In 6 M KOH. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (2). pp. 1-8. ISSN 1985-3157

Mohd Abid, Mohd Asyadi Azam and Alias, Farizul Muiz and Liew, Weng Tack and Raja Seman, Raja Noor Amalina and Mohamad Taib, Mohamad Fariz (2017) Electronic Properties And Gas Adsorption Behaviour Of Pristine, Silicon-, And Boron-Doped (8, 0) Single-Walled Carbon Nanotube : A First Principles Study. Journal of Molecular Graphics and Modelling, 75 (-). pp. 85-93. ISSN 1093-3263

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Wong, Gao Jie and Bahar, Mohd Bazli and Sulaiman, Marizan and Mat Ibrahim, Masrullizam and Zainal Abidin, Amar Faiz (2017) Quality checking and inspection based on machine vision technique to determine tolerancevalue using single ceramic cup. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2737-2742. ISSN 1819-6608

Mohd Annuar, Khalil Azha and Ab Hadi, Nik Azran and Subramaniam, Siva Kumar and Mohd Ab Halim, Mohd Firdaus and Nor Shah, Mohd Badril and Kadmin, Ahmad Fauzan and Mohd Noh, Mohd Syahrin Amri and Abdul Salam, Azuki (2017) Intelligent Image Capturing Alarm System Using Raspberry Pi. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (4). pp. 1651-1658. ISSN 1693-6930

Mohd Aras, Mohd Shahrieel and Boon, Pei Teow and Ai, Kee Teoh and Pei, Kee Lee and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2017) Evaluation And Analysis Of Pid And Fuzzy Control For AUV-YAW Control. Journal of Theoretical and Applied Information Technology, 95 (17). pp. 4256-4364. ISSN 1992-8645

Mohd Aras, Mohd Shahrieel and Kamarudin, Muhammad Nizam and Zainal, Iktisyam and Mohd Zambri, Mohd Khairi and Sulaiman, Marizan (2017) Analysis Of Integrated Sensor For Unmanned Underwater Vehicle Application. Indian Journal Of Geo-Marine Sciences, 46 (12). pp. 2552-2561. ISSN 0379-5136

Mohd Aras, Mohd Shahrieel and Sulaiman, Marizan and Yeoh, Eik Keong and Kasno, Mohammad `Afif and Mohamed Kassim, Anuar and Khamis, Alias (2017) Performance Analysis Of PID And Fuzzy Logic Controller For Unmanned Underwater Vehicle For Depth Control. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 59-63. ISSN 2180-1843

Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ab Rashid, Siti Rosmaniza and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2017) Dielectric Analysis Of Liquid Solvents Using Microwave Resonator Sensor For High Efficiency Measurement. Microwave And Optical Technology Letters, 59 (2). pp. 367-371. ISSN 0895-2477

Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ab Rashid, Siti Rosmaniza and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2017) High-Efficiency Microwave Planar Resonator Sensor Based On Bridge Split Ring Topology. IEEE Microwave And Wireless Components Letters, 27 (6). pp. 545-547. ISSN 1531-1309

Mohd Darus, Norazlina and Yunus, Ahmad Rozelan and Rahman, Noor Watee (2017) Factors enhancing the performance of SMEs' services sectors: A conceptual framework. International Journal of Advanced and Applied Sciences, 4 (3). pp. 160-166. ISSN 2313-626X

Mohd Fuad, Mohamad Aqil and Ab Ghani, Mohd Ruddin and Ghazali, Rozaimi and Sulaima, Mohamad Fani and Jali, Mohd Hafiz and Sutikno, Tole and Ahmad Izzuddin, Tarmizi and Jano, Zanariah (2017) A Review On Methods Of Identifying And Counting Aedes Aegypti Larvae Using Image Segmentation Technique. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (3). pp. 1199-1206. ISSN 1693-6930

Mohd Ishak, Noordiana and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan (2017) Weighting of natural fibre criteria for fibre metal laminate using entropy method for car front hood utilization. Key Engineering Materials, 740. pp. 75-80. ISSN 1662-9795

Mohd Saad, Norhashimah and Mohd Noor, Nor Shahirah and Abdullah, Abdul Rahim and Ooi, Yi Fong and Abdul Rahman, Nor Nabilah Syazana (2017) Real-Time LCD Digit Recognition System. Indonesian Journal Of Electrical Engineering And Computer Science, 6 (2). pp. 402-411. ISSN 2502-4752

Mohd Saad, Wira Hidayat and Abd. Razak, Muhd. Shah Jehan and Tan, Yun Shen and Abd Salam, Nurul Akmal and Salehuddin, Fauziyah and Wong, Yan Chiew (2017) Implementation Of Continuous Wearable Low Power Blood Glucose Level Detection Using GSR Sensor. -. pp. 1-5. ISSN -

Mohd Salleh, Mohd Azran and Mohamad, Siti Nurul Mahfuzah (2017) The Effectiveness Of Using Multiple Intelligences Courseware In Learning Multimedia Subject. Advanced Journal Of Technical And Vocational Education, 1 (1). pp. 328-334. ISSN 2550-2174

Mohd Sapuan, Salit and Jumaidin, Ridhwan and Ishak, Mohamad Ridzwan and Jawaid, Mohammad and Sahari, Japar (2017) Effect Of Seaweed On Mechanical, Thermal, And Biodegradation Properties Of Thermoplastic Sugar Palm Starch/Agar Composites. International Journal of Biological Macromolecules, 99. pp. 265-273. ISSN 0141-8130

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Aras, Mohd Shahrieel and Mohd Ali, Nursabillilah and Wasbari, Faizil and Tengku Anuar, Tengku Muhammad Mahfuz (2017) Sign Detection Vision Based Mobile Robot Platform. Indonesian Journal Of Electrical Engineering And Computer Science, 7 (2). pp. 524-532. ISSN 2502-4752

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Shukor, Ahmad Zaki and Kamis, Zalina and Ab Rashid, Mohd Zamzuri (2017) Vision Based For Classification Of MIG Butt Welding Joint Defect Using Occurrence Matrices And Gray Absolute Histogram. International Journal Of Mechanical & Mechatronic Engineering (Ijmme), 17 (5). pp. 60-66. ISSN 2227-2771

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Ali, Nursabillilah and Mohd Aras, Mohd Shahrieel and Wasbari, Faizil and Omar, Zakarya Ali Ahmed (2017) A 3D Mapping Of The Surrounding Object Using Stereo-Vision Technique. International Journal of Soft Computing and Engineering (IJSCE), 12 (1). pp. 59-65. ISSN 1816-9503

Mohd Sultan, Juwita and Markarian, Garik and Jackson, James (2017) Hybrid WiFi And WiMAX In Disaster Management For PPDR Services. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3). pp. 61-65. ISSN 2180-1843

Mohd Yusoff, Azizul and Salam, Sazilah and Mohamad, Siti Nurul Mahfuzah and Daud, Rafizah (2017) Gamification element through massive open online courses in TVET: an analysis using analytic hierarchy process. Advanced Science Letters, 23 (9). pp. 8713-8717. ISSN 1936-6612

Mohmad, Martini and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite. Industrial Lubrication And Tribology, 69 (5). pp. 768-774. ISSN 0036-8792

Moketar, Nor Aiza and Kamalrudin, Massila and Mohd Yusof, Mokhtar and Sidek, Safiah and Robinson, Mark (2017) A Study Of Generating Abstract Test For Requirement Validation Among Requirement Engineers. Journal Of Theoretical And Applied Information Technology, 95 (7). pp. 1381-81388. ISSN 1992-8645

Muhammad, M and Rasin, Zulhani and Jidin, Auzani (2017) Implementation Of Carrier-Based Simple Boost Pulse Width Modulation (PWM) For Z-Source Inverter (ZSI) Using Field Programming Gate Array (FPGA). IOP Conference Series: Materials Science And Engineering, 226. 012141. ISSN 1757-8981

Muhammad, maizatun and Abu, Maisarah and Zakaria, Zahriladha and Hassan , Hasnizom (2017) Novel Artificial Magnetic Conductor for 5G Application. Indonesian Journal Of Electrical Engineering And Computer Science. pp. 636-642. ISSN 2502-4752

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Shuhimi, Fairuz Fazillah and Muhammad, Noryani (2017) Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material. Industrial Lubrication And Tribology, 69 (2). pp. 259-266. ISSN 0036-8792

Mutalib, Mohamad Ariffin and Zakaria, Zahriladha and Shairi, Noor Azwan (2017) High Selectivity Microstrip Bandpass Filter Integrate With Ring Resonator Bandstop Filter. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-13). pp. 39-42. ISSN 2180-1843

Nabi, Fizza Ghulam and Sundaraj, Kenneth and Lam, Chee Kiang and Palaniappan, Rajkumar and Sundaraj, Sebastian (2017) Wheeze Sound Analysis Using Computer-Based Techniques: A Systematic Review. Biomedical Engineering / Biomedizinische Technik (BMT), 64 (1). 1 - 28. ISSN 1862-278X

Nady, Ahmad and Ahmed, Mahmoud Hazzaa M. and Numan, Arshid and T. Subramaniam, Ramesh and Abdul Latiff, Anas and Ooi, Raymond C. H. and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Passively Q-Switched Erbium-Doped Fibre Laser Using Cobalt Oxide Nanocubes As A Saturable Absorber. Journal Of Modern Optics, 64 (13). pp. 1315-1320. ISSN 0950-0340

Nasruddin, Nurul Hafizah and Abdul Khalid, Fararishah (2017) The Influence of Internal and External Forces in Adoption of Electronic Customer Relationship Management (eCRM) in Malaysian SMEs. The Social Sciences. pp. 22-28. ISSN 1818-5800 (In Press)

Nazan, Muhammad Afdhal and Ramli, Faiz Redza and Alkahari, Mohd Rizal and Sudin, Mohd Nizam and Abdullah, M. A. (2017) Process Parameter Optimization Of 3D Printer Using Response Surface Method. ARPN Journal Of Engineering And Applied Sciences, 12 (7). pp. 2291-2296. ISSN 1819-6608

Nazir Ali, Nornazurah and Aman, Aminudin and Abd Razak, Jeefferie and Zakaria, Zahriladha and Zainuddin, Hidayat (2017) Optimization Of Surface Resistivity And Relative Permittivity Of Silicone Rubber For High Voltage Application Using Response Surface Methodology. Journal Of Electrical Systems, 13 (2). pp. 211-227. ISSN 1112-5209

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence of kenaf fibre orientation effect on the mechanical properties of hybrid structure of fibre metal laminate. Pertanika Journal of Science & Technology, 25 (S5). pp. 1-8. ISSN 0128-7680

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli (2017) Fatigue performance of hybrid fibre metal laminate structure. International Review of Mechanical Engineering, 11 (1). pp. 61-68. ISSN 1970-8734

Nik Mohd Salleh, Nik Muhammad Farid and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Nj., Mohamed and Sahib, Shahrin and Suryana, Nanna and Hussin, B. (2017) RTS/CTS Framework Paradigm and WLAN QoS Provisioning Methods. International Journal Of Advanced Computer Science And Applications (IJACSA), 8 (2). pp. 176-186. ISSN 2158-107X

Norazman, Farhaneem and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah and Mohamad, Noraiham (2017) Optimization of phosphoric acid treatment biochar using response surface method. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (SI). pp. 453-466. ISSN 1985-3157

Norazman, Farhaneem and Se, Sian Meng and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah (2017) Microstructural analysis on biochar obtained from rubber wood sawdust via slow pyrolysis. Solid State Phenomena, 264. pp. 13-16. ISSN 1662-9779

Omar, Nooririnah and Mohamed, Suhana and Raja Rasi, Raja Zuraidah and Ahmad, Aminah (2017) Effect Of Cold Sprayed Al Coating On Corrosion Behaviour Of Sponson Spar. Journal Of Advanced Research In Materials Science, 28 (1). pp. 1-8. ISSN 2289-7992

Osman, Edynoor and Abd Rashid, Mohd Warikh and T., Moriga and K., Murai and Abd Manaf, Mohd Edeerozey (2017) Transparent Coating Oxide - Indium Zinc Oxide As Conductive Coating : A Review. Reviews On Advanced Materials Science, 49. pp. 150-157. ISSN 1605-8127

Osman, Mohd Hairizal and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain (2017) Optimization Of Drilling Parameters On Diameter Accuracy In Dry Drilling Process Of AISI D2 Tool Steel. International Journal Of Applied Engineering Research, 12 (20). pp. 9644-9652. ISSN 0973-4562

Osman, Mohd Hairizal and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain (2017) A Study Of Optimization For Surface Finish On Drilling Process Of AISI D2 Tool Steel. International Journal Of Applied Engineering Research, 12. 9644-9652 . ISSN 0973-4562

Patakor, Fizatul Aini and Jantan, Normah and Sulaiman, Marizan and Salleh, Zulhisyam (2017) Auto-Tuning Sliding Mode Contol For Induction Motor Drives. Ieee Xplore. pp. 77-82. ISSN -

Putra, Azma and Khai, Hee Or and Selamat, Mohd Zulkefli (2017) Oil Palm Empty Fruit Bunch Fibres As Sustainable Acoustic Absorber. Applied Acoustics, 119. pp. 9-16. ISSN 0003-682X

Rahim, Norain and Ab Aziz, Ab Wafi and Mustaffa, Izadora and Wan Hassan, Wan Haszerila and Che Aziz, Siti Asma (2017) A Low-Cost Data Acquisition For CMOS-Based Optical Tomography System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-7). pp. 13-18. ISSN 2180-1843

Rahmiati, Filda and Tahir, Md.Nor Hayati and Mubarak, Zulfikar (2017) Corporate Image Influencing Customers’ Purchase Decision In Minimarket In Bekasi. Advanced Science Letters, 23 (8). pp. 7838-7840. ISSN 1936-6612

Raja Othman, Raja Nor Firdaus Kashfi and Che Ahmad, Suhairi Rizuan and M. Z., Aishah and Abdul Shukor, Fairul Azhar and Othman, Md Nazri and Ibrahim, Zulkifilie and Vaithilingam, Chockalingam Aravind (2017) Performance characteristics of non-arc double stator permanent magnet generator. Progress In Electromagnetics Research M, 53. pp. 201-214. ISSN 1937-8726

Raja Othman, Raja Nor Firdaus Kashfi and Sulaiman, Farina and Suhairi Rizuan, Che Ahmad and Abdul Karim, Kasrul and Abdul Shukor, Fairul Azhar and Khamis, Aziah and Norhisam, Misron (2017) Improvement Of Torque Density Spoke Type BLDC Motor Using New Hollow Rotor Topology. International Review Of Electrical Engineering (IREE), 12 (1). pp. 19-25. ISSN 1827- 6660

Raja Sehar, Raja Huda and Van, Tze Jing and Mohd Din, Adilah (2017) Determinants Of CSR Disclosure: A Study On The Listed Fast Moving Consumer Goods (FMCG) Companies In Bursa Malaysia. International Journal of Business and Management Invention, 6 (2). 07-12. ISSN 2319 – 801X

Ramli, Mohd Irman and Nuawi, Mohd Zaki and Abdullah, Samizee and Mohammad Rasani, Mohammad Rasidi and Md Basar, Mohd Farriz and Ahmad, Muhamad Arif Fadli and Kho, Ko Seng (2017) Novel Technique Of Modal Analysis On Small Structure Using Piezoelectric Film Sensor And Accelerometer. ARPN Journal Of Engineering And Applied Sciences, 12 (17). pp. 4902-4912. ISSN 1819-6608

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Ahmad, Muhamad Arif Fadli and Kho, Ko Seng (2017) An Investigation On Light Structure Modal Parameter By Using Experimental Modal Analysis Method Via Piezofilm Sensor. Jurnal Teknologi, 79 (6). pp. 159-165. ISSN 0127-9696

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Thamburaja, P. and Ahmad, Muhamad Arif Fadli and Koh, Ko Seng (2017) An Investigation Of Modal Analysis For Al6061 Between Piezoelectric Film Sensor And Accelerometer. Journal of Built Environment, Technology and Engineering, 2. pp. 112-121. ISSN 0128-1003

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Mohammad Rasani, Mohammad Rasidi and Abdullah, Shahrum and Kho, Ko Seng (2017) Modal Analysis Study On Aluminum 6061 Using Accelerometer And Piezoelectric Film Sensor. International Journal of Applied Engineering Research, 12 (5). pp. 787-792. ISSN 0973-4562

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Salleh, Mohd Shukor and Md Basar, Mohd Farriz (2017) The Study Of EMA Effect On Modal Identification: A Review. Journal Of Mechanical Engineering Technology, 9 (1). pp. 103-121. ISSN 2180-1053

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Kho, Ko Seng and Ahmad, Muhamad Arif Fadli (2017) Novel Technique Of Modal Analysis For Light Structure Via Piezofilm Sensor: A Comparison Study. Jurnal Teknologi, 79 (5-2). pp. 15-20. ISSN 0127-9696

Razak, Muhammad Shahmi and Sulaiman, Mohd Amri and Mat, Siti Asiyah and Ramle, Zuraimi and Mohamad, Effendi and Salleh, Mohd Rizal (2017) The Effect Of Cryogenic Cooling On Surface Roughness Of Titanium Alloy: A Review. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 101-114. ISSN 1985-3157

Razak, Nurul Nadia and Yasin, Moh and Zakaria, Zahriladha and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Q-Switched Fiber Laser With A Tungsten Disulfide Saturable Absorber Prepared By The Drop Casting Method. Photonics Letters Of Poland, 9 (3). pp. 103-105. ISSN 2080-2242

Rosol, Ahmad Haziq Aiman and Abdul Rahman, Husna and Ismail, Ezzatul Irradah and Irawati, Ninik and Jusoh, Zulzilawati and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Cadmium Selenide Polymer Microfiber Saturable Absorber For Q-Switched Fiber Laser Applications. Chinese Physics Letters, 34 (9). 094202-1. ISSN 0256-307X

Saat, Shahrizal and Fikri, Mohd Nabil and Mohd Tumari, Mohd Zaidi and Abdul Kadir, Ahmad Muzaffar and Abd Rashid, Wan Norhisyam and Wan Hamat, Wan Hassan (2017) Experiment Of Speed Control For An Electric Trishaw Based On Pid Control Algorithm. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 38-45. ISSN 2227-2771

Sabaruddin, Saiful Akmal and Yusof, Ahmad Anas and Saadun, Mohd Noor Asril and Ghazali, Rozaimi (2017) Application Of Water As Pressure Medium In Hydraulic Hybrid System. Journal Of Engineering And Applied Sciences, 12 (16). pp. 4824-4830. ISSN 1819-6608

Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Salleh, N. and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Salleh, Zulhisyam and Sulaiman , Marizan and Omar, Rosli and Patakor, Fizatul Aini (2017) Optimization Of Fuzzy Logic Based For Vector Control Induction Motor Drives. Ieee Xplore. pp. 1-6. ISSN -

Sapuan, Salit M. and Jumaidin, Ridhwan and Ishak, Mohamad Ridzwan and Jawaid, Mohammad (2017) Thermal, Mechanical, And Physical Properties Of Seaweed/Sugar Palm Fibre Reinforced Thermoplastic Sugar Palm Starch/Agar Hybrid Composites. International Journal of Biological Macromolecules, 97. pp. 606-615. ISSN 0141-8130

Sedek, Muliati and Ahmad, Rabiah and Mahmud, Rosnaini and Jamal, Azmalniza (2017) Utilising Utaut Model In Defining Influencing Factors Of Ubiquitous Technology (U-Tech) Usage. Journal Of Engineering And Applied Sciences, 12 (7). pp. 1720-1726. ISSN 1816-949X

Seemork, Jiraporn and Sako, Takumi and Md Ali, Mohd Amran and Yamaguchi, Masayuki (2017) Rheological Response Under Nonisothermal Stretching For Immiscible Blends Of Isotactic Polypropylene And Acrylate Polymer. Journal Of Rheology, 61 (1). pp. 1-11. ISSN 0148-6055

Selamat, Mohd Zulkefli and Sahadan, Siti Norbaya and Dhar Malingam, Sivakumar and Sudiana, Yayan and Mohamad, Noraiham (2017) Epoxy/carbon black/graphite composite bipolar plate prepared by high speed mixing technique. Proceedings Of Mechanical Engineering Research Day 2017. pp. 410-412. ISSN -

Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Abdullah, Abdul Rahim and Musa, Haslinda and Ranom, Rahifa (2017) Lead Acid Battery Analysis Using S-Transform. International Journal on Advanced Science Engineering Information Technology(IJASEIT), 7. p. 8. ISSN 2088-5334

Shaaban, Azizah and Mohamad Yatim, Norazlina and Dimin @ Mohd Amin, Mohd Fairuz and Yusof, Faridah and Abd Razak, Jeefferie (2017) Multiwalled carbon nanotubes enhancing nitrogen uptake and use efficiency of urea fertlizer by paddy. Jurnal Teknologi, 79 (5-2). pp. 105-109. ISSN 0127-9696

Shaarani, Ahmad Shaarizan and Bakar, Norasiken and Saifudin, Wan Sazli Nasaruddin and Abdullah, Aida Nasirah and Abd Aziz, Maslita (2017) Implementing flipped learning method in programming course: A case study at UTeM. Journal of Applied Environmental and Biological Sciences, 7 (10). pp. 207-213. ISSN 2090-4274

Shair, Ezreen Farina and Ahmad, Siti Anom and Marhaban, Mohammad Hamiruce and Tamrin, Shamsul and Abdullah, Abdul Rahim (2017) Impact Of Different Lifting Height And Load Mass On Muscle Performance Using Periodogram. Pertanika Journal of Science and Technology, 25 (S). pp. 1-8. ISSN 0128-7680

Shairi, Noor Azwan and Ahmad, Badrul Hisham and Zahari, Mohd Khairy and Wong , Peng Wen (2017) Switchable Absorptive Bandstop To Bandpass Filter Using Stepped-Impedance Dual Mode Resonator. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 9 (2-13). pp. 17-21. ISSN 2289-8131

Shairi, Noor Azwan and Algumaei, Mohammed Yahya Qaid and Zakaria, Zahriladha and Mohd Ibrahim, Imran (2017) Review Of Mixer And Balun Designs For Uwb Applications. International Journal Of Applied Engineering Research, 12 (1). pp. 6514-6522. ISSN 0973-4562

Shairi, Noor Azwan and Azian Kamaruddin, Rabiatul Adawiyah and Mohd Ibrahim, Imran and Rahim, M.A.A. and Zakaria, Zahriladha and Rahman, T.A. (2017) Radial Line Slot Array (Rlsa) Antenna Design At 28 Ghz Using Air Gap Cavity Structure. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 133-136. ISSN 2180-1843

Shairi, Noor Azwan and Sazali, M.A. and Zakaria, Zahriladha (2017) Microstrip Triplexer Design: A Review. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-13). pp. 81-86. ISSN 2180-1843

Shairi, Noor Azwan and Zakaria, Zahriladha and Alhegazi, Ammar and Ahmed, Sharif and Sutikno, Tole (2017) UWB Filtenna With Electronically Reconfigurable Band Notch Using Defected Microstrip Structure. Indonesian Journal Of Electrical Engineering And Computer Science, 8 (2). pp. 302-307. ISSN 2502-4752

Shairi, Noor Azwan and Zakaria, Zahriladha and Alhegazi, Ammar and Mohd Ibrahim, Imran and Ahmed, Sharif (2017) A Novel Reconfigurable UWB Filtering-Antenna with Dual Sharp Band Notches Using Double Split Ring Resonators. Progress In Electromagnetics Research, 79. pp. 185-198. ISSN 1043-626X

Shairi, Noor Azwan and Zakaria, Zahriladha and Edward, Nurhasniza (2017) Reconfigurable Feeding Network With Dual-Band Filter For Wimax Application. International Journal of Electrical and Computer Engineering (IJECE), 7 (5). pp. 2411-2419. ISSN 2088-8708

Shairi, Noor Azwan and Zakaria, Zahriladha and Zobilah, Abdullah Mohammed Saghir (2017) Fixed And Selectable Multiband Isolation Of Double Pole Double Throw Switch Using Transmission Line Stub Resonators For Wimax And Lte. Progress In Electromagnetics Research B, 72. pp. 95-110. ISSN 1937-6472

Shairi, Noor Azwan and Zobilah, Abdullah Mohammed Saghir and Ahmad, Badrul Hisham and Zakaria, Zahriladha (2017) Design Comparison Of Rf Spdt Switch With Switchable Resonators For Wimax And Lte In 3.5 Ghz Band. International Journal of Applied Engineering Research, 12 (20). pp. 9614-9618. ISSN 0973-4562

Shamshiri, Meysam and Gan, Chin Kim and Omar, Rosli (2017) Assessment Of Distribution Networks Performance Considering Residential Photovoltaic Systems With Demand Response Applications. Journal Of Renewable And Sustainable Energy, 9 (4). 045502-1. ISSN 1941-7012

Sheikh Md Fadzullah, Siti Hajar and Ifayefunmi, Olawale Friday and Mustafa, Zaleha and Omar, Ghazali and Mansor, Muhd Ridzuan (2017) Perforation Behaviour Of Composites Sandwich Structures On Low-Velocity Impact At Oblique Angles. International Journal Of Automotive And Mechanical Engineering (IJAME), 14 (2). pp. 4158-4170. ISSN 2229-8649

Sheikh Md Fadzullah, Siti Hajar and Ramli, Siti Nur Rabiatutadawiah and Mustafa, Zaleha (2017) The Effect Of Alkaline Treatment And Fiber Length On Pineapple Leaf Fiber Reinforced Poly Lactic Acid Biocomposites. Jurnal Teknologi, 79. pp. 111-115. ISSN 2180–3722

Shikh Anuar, Fadhilah and Malayeri, Mohammad Reza and Hooman, Kamel (2017) Particulate Fouling And Challenges Of Metal Foam Heat Exchangers. Heat Transfer Engineering, 38 (7-8). pp. 730-742. ISSN 0145-7632

Shonubi, Olurotimi Adebayo and Abdullah, Norida and Hashim, Rahman and Ab. Hamid, Norhidayu (2017) Appreciation: An Empirical Review On The Colossal Impact On Telecom Industry Employee Retention In Malaysia. PEOPLE: International Journal Of Social Sciences, 3 (1). pp. 40-52. ISSN 2454-5899

Shueb, Mohammed Iqbal and Abd Manaf, Mohd Edeerozey and Ratnam, Chantara Thevy and Mohamad, Noraiham (2017) INFLUENCE OF SONICATION ASSISTED DISPERSION METHOD ON THE MECHANICAL AND ELECTRICAL PROPERTIES OF NYLON 66/NANO-COPPER NANOCOMPOSITE. Jurnal Teknologi, 79 (5-2). pp. 77-81. ISSN 0127-9696

Shueb, Mohammed Iqbal and Abd Manaf, Mohd Edeerozey and Ratnam, Chantara Thevy and Mohamad, Noraiham (2017) Influence Of Sonication Assisted Dispersion Method On The Mechanical And Electrical Properties Of Nylon 66/Nano-Copper Nanocomposite. Jurnal Teknologi, 79 (5-2). pp. 77-81. ISSN 0127-9696

Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351

Sidek, Safiah and Kamalrudin, Massila and Abdul Rahim, Razilah (2017) The Manifestation Of Varieties Of Blended Learning Pedagogy In Higher Education. Journal Of Human Capital Development, 10 (1). pp. 1-22. ISSN 1985-7012

Sidek, Safiah and Kamalrudin, Massila and Daud, Nadiah (2017) Eliciting functional requirements in clinical domain: a review. International Research Journal of Engineering and Technology (IRJET), 4 (6). pp. 1661-1665. ISSN 2395-0072

Sivakumar, Dhar Malingam (2017) Fatigue Life Behaviour of Glass/Kenaf Woven-Ply Polymer Hybrid Biocomposites. Journal of Polymers and the Environment, 21 (3). pp. 1-11. ISSN 1566-2543 (In Press)

Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Failure Analysis of Hybrid Fibre Reinforced Plastics for Bolted Joint under Thermal Effect. Journal of Mechanical Engineering, SI 1 (1). pp. 141-156. ISSN 1823-5514

Su, Muhammad Nasiruddin and Arep @ Ariff, Hambali and Jaafar, Roshidah and Widodo, Wahyono Sapto and Ahmad, Mohd Nazri (2017) A Review Of Energy Absorption Of Automotive Bumper Beam. International Journal of Applied Engineering Research, 12 (2). pp. 238-245. ISSN 0973-4562

Sulaiman , Marizan and Patakor, Fizatul Aini and Salleh, Zulhisyam and Aziri, Hasif (2017) Comparison Performance Of Indirect Field Oriented Control For Three-Phase Induction Motor Drive. International Journal Of Power Epectronics And Drive System (Ijpeds), 8 (4). pp. 1682-1692. ISSN 2088-8694

Sundaraj, Kenneth and Rabbi, Mohammad Fazle and Ahamed, Nizam Uddin and Alqahtani, Mahdi and Altwijri, Omar and Ghazali , Kamarul Hawari (2017) Investigation Of The EMG-Angle Relationship In The Upper-Limb Muscles During Isometric Contraction. Biomedical Research (India), 28. pp. 2393-2397. ISSN 0970938X

Sundaraj, Kenneth and Palaniappan, Rajkumar and Sundaraj, Sebastian (2017) Adaptive Neuro-Fuzzy Inference System For Breath Phase Detection And Breath Cycle Segmentation. Computer Methods And Programs In Biomedicine, 145. pp. 67-72. ISSN 0169-2607

Sundaraj, Kenneth and Wan Samsudin, Wan Syahirah and Samad, Rosdiyana and Mustafa, Mahfuzah and Abdullah, Nor Rul Hasma (2017) Correlation Of Objective Assessment Of Facial Paralysis With House-Brackmann Score. Telkomnika, 15. pp. 829-835. ISSN 1693-6930

Syed Hussien, Sharifah Yuslinda and Ghazali, Rozaimi and Jaafar, Hazriq Izzuan and Chong, Chee Soon (2017) Disturbance Rejection Experimental In 3D INTECO Gantry Crane System Via PID-VSC Tuned By PFPSO. Journal Of Engineering Science and Technology, 12. pp. 26-38. ISSN 1823-4690

T. Subramaniam, Ramesh and Karuppiah, Rajammal and Kasi, Ramesh and Dhar Malingam, Sivakumar and Duraisamy, Navaneethan (2017) Influences of sintering temperatures and crystallite sizes on electrochemical properties of LiNiPO4 as cathode materials via sol–gel route for lithium ion batteries. Journal of Sol-Gel Science and Technology, 83 (1). pp. 12-18. ISSN 0928-0707

Tahir, Md.Nor Hayati and AbMalek, Muhammad Ridzuan (2017) Investigating An Adoption Of Smartphone: A Road To Ubiquitous Business Management. International Journal Of Advanced Research, 5 (1). pp. 509-516. ISSN 2320-5407

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Rasin, Zulhani and Mat Lazi, Jurifa and Azri, Maaspaliza (2017) Investigation Of Different Rules Size FLSC Performance Applied To Induction Motor Drive. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 165-169. ISSN 2180-1843

Talib, Md Hairul Nizam and Yahya Farah, Nabil Salem and Mat Lazi, Jurifa and Ibrahim, Zulkifilie and Abo Ali, Majed (2017) Multilevel Inverter Fed Switched Reluctance Motors (SRMs) 6/4,8/6 And 10/8 SRM Geometric Types. International Journal Of Power Electronics And Drive System (IJPEDS), 8. pp. 584-592. ISSN 2088-8694

Taufiq, M.J. and Mustafa, Zaleha and Mansor, Muhd Ridzuan (2017) Utilisation Of Recycled Thermoplastics Sourced From Rejected-Unused Disposable Diapers As Polymer Blends. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3137-3143. ISSN 2289-4659

Tee, Siau Ping and Md Ghazaly, Mariam and Chong, Shin Horng and Jamaludin, Irma Wani (2017) Rotary Switched Reluctance Actuator: A Review On Design Optimization And Its Control Methods. International Journal Of Power Electronics And Drive System (IJPEDS), 8 (3). pp. 1087-1090. ISSN 2088-8694

Too, Jing Wei and Abdullah, Abdul Rahim and Tengku Zawawi, Tengku Nor Shuhada and Mohd Saad, Norhashimah and Musa, Haslinda (2017) Classification Of EMG Signal Based On Time Domain And Frequency Domain Features. International Journal Of Human And Technology Interaction (IJHaTI), 1 (1). pp. 25-30. ISSN 2590-3551

Utomo, Fandy Setyo and Suryana, Nanna and Azmi, Mohd Sanusi (2017) Question Answering System : A Review On Question Analysis, Document Processing, And Answer Extraction Techniques. Journal Of Theoretical And Applied Information Technology, 95 (14). 3158 - 3174. ISSN 1992-8645

Wahid, Herman and Mohd Noor, Ahmad Fakri and Burhanuddin, Dirman Hanafi and Ghazali, Rozaimi (2017) Design of an automated hybrid system for aquaculture and agriculture process and its performance analysis. International Journal Of Integrated Engineering, 9 (4). pp. 49-56. ISSN 2229-838X

Wan Abdul Razak, Intan Azmira and Zainal Abidin, Izham and Keem Siah, Yap and Zainul Abidin, Aidil Azwin and Abdul Rahman, Titik Khawa (2017) Short Term Electricity Price Forecasting With Multistage Optimization Technique Of LSSVM-GA. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 9 (2-7). pp. 117-122. ISSN 2289-8131

Wasbari, Faizil and Abu Bakar, Rosli and Gan, Leong Ming and Mohd Tahir, Musthafah and Yusof, Ahmad Anas (2017) A Review Of Compressed-Air Hybrid Technology In Vehicle System. Renewable And Sustainable Energy Reviews, 67. pp. 635-653. ISSN 1364-0321

Wasbari, Faizil and Abu Bakar, Rosli and Gan, Leong Ming and Yusof, Ahmad Anas and Amat Jafar, Zarina (2017) Simulation Of Storage Performance On Hydro-Pneumatic Driveline In Dual Hybrid Hydraulic Passenger Car. MATEC Web Of Conferences, 90. pp. 1-13. ISSN 2261-236X

Yaakob, Mohd Yuhazri and Husin, Mohd Amirhafizan and Saijod, Lau and Abdullah, A. and Yahaya, Saifudin Hafiz (2017) Potentiality Of Utilising Non-Woven Kenaf Fibre Composite For Car Door Map Pocket. Journal of Advanced Manufacturing Technology (JAMT) , 11 (2). pp. 129-138. ISSN 1985-3157

Yaakob, Mohd Yuhazri and K. M., Hafiz and Y. Z. A., Myia and Jia, C. P. and Sihombing, Haeryip and Salit, Mohd Sapuan and Badarulzaman, Nur Azam (2017) Evaluation on compression properties of different shape and perforated rHDPE in concrete structures. Journal Of Physics: Conference Series, 914 (1). pp. 1-8. ISSN 1742-6588

Yaakob, Mohd Yuhazri and K. M., Hafiz and YZA, Myia and Jia, C. P. and Haeryip, Sihombing and Salit, Mohd Sapuan and Badarulzaman, Nur Azam (2017) The effect of different shape and perforated rHDPE in concrete structures on flexural strength. Journal Of Physics, 2017. pp. 1-8. ISSN -

Yanto, Heri and Hasan, Ismail and Fam, Soo Fen and Raeni, Raeni (2017) Strengthening PROPER Implementation To Improve Transparency In Managing Carbon Emission Among Indonesian Manufacturing Companies. International Journal of Business And Management Science, 7 (2). pp. 219-236. ISSN 1837-6614

Yoe, Chin Kiat and Md Ghazaly, Mariam and Chong, Shin Horng and Jamaludin, Irma Wani (2017) A Review: Design Variables Optimization And Control Strategies Of A Linear Switched Reluctance Actuator For High Precision Applications. International Journal Of Power Electronics And Drive System (IJPEDS), 8 (2). pp. 963-978. ISSN 2088-8694

Yusop, Noorrezam and Kamalrudin, Massila and Mohd Yusof, Mokhtar and Sidek, Safiah (2017) Eliciting Security Requirments For Mobile Apps: A Replication Study. Journal Of Theoretical And Applied Information Technology, 95 (15). pp. 3613-3622. ISSN 1992-8645

Zahari, Mohd Khairy and Ahmad, Badrul Hisham and Wong , Peng Wen and Shairi, Noor Azwan and Mutalib, Mohamad Ariffin and Hassan, Nornikman (2017) An Investigation Of Switchable Matched Bandstop To Bandpass Filter Based On Lossy Resonator. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1-5). pp. 119-123. ISSN 2180-1843

Zainal Abidin, Mohammad Anas and Dimin @ Mohd Amin, Mohd Fairuz and Said, Md Radzai and Se, Sian Meng and Shaaban, Azizah and Abd Rahman, Md Nizam (2017) Optimization Of Fluidised Bed Granulation Process Parameters For Urea Granule Manufacturing Using The Response Surface Method. Solid State Phenomena, 264. pp. 182-185. ISSN 1662-9779

Zainol, Nurzaimah and Zakaria, Zahriladha and Abu, Maisarah and Mohamed Yunus, Mawarni (2017) A 2.45 GHz Harmonic Suppression Rectangular Patch Antenna With Circular Polarization For Wireless Power Transfer Application. IETE Journal Of Research. pp. 1-7. ISSN 0377-2063

Zakaria, Kamarul Ariffin and Ad Suhadak, Fadrah Hanim and Ali, Mohd Basri and Abdullah, S. and Ghazali, Mariyam Jameelah (2017) Influence Of Mechanical Properties On Load Sequence Effect And Fatigue Life Of Aluminium Alloy. Journal of Mechanical Engineering and Sciences (JMES), 11 (1). pp. 2467-2477. ISSN 2289-4659

Zakaria, Shahrudin and Syed Salim, Syed Najib and Che Hasan, Mohd Hanif and Zainon, Maslan and Abd Razak, Norazlina (2017) Bio-Physics Concept For Camera Vision Hypothesis Of Colour White. International Journal Of Applied Engineering Research, 12 (7). pp. 1205-1208. ISSN 0973-4562

Zolait, Ali and Palaniappan, Shamala and Ahmad, Rabiah and Sedek, Muliati (2017) Integrating Information Quality Dimensions Into Information Security Risk Management (ISRM). Journal of Information Security and Applications, 36. pp. 1-10. ISSN 2214-2134

Zuraida , Abal Abas and Zaheera , Zainal Abidin and Abdul Samad , Shibghatullah and Ahmad Fadzli Nizam, Abdul Rahman and Hidayah, Rahmalan and Nur Farraliza, Mansor (2017) THE SEVEN CASES UNSTRUCTURED TRIANGULATION TECHNIQUE FOR RADIATIVE HEAT TRANSFER APPROXIMATION IN AN ETHYLENE FURNACE CRACKER. Global Journal of Engineering Science and Research Management, 4(7) (12). pp. 114-144. ISSN 2349-4506

muhammad, maizatun and Abu, Maisarah and Zakaria, Zahriladha and hassan, hasnizom (2017) Improvement Antenna Performance by using Artificial Magnetic Conductor at 28 GHz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) . pp. 93-99. ISSN 2180-1843

Book Chapter

Jaya Kumar, Yogan and Fong , Jia Kang and Ong , Sing Goh and Khan, Atif (2017) Text Summarization Based On Classification Using ANFIS. In: Advanced Topics In Intelligent Information And Database Systems. Springer, pp. 405-417. ISBN 9783319566603

Mat, Zawiah (2017) Keindahan Akhlak Dan Adab Menurut Al-Quran. In: Al-Quran Memartabatkan Ilmu Membumikan Titah Wahyu. Penerbit UTeM, Melaka, pp. 1-14.

Conference or Workshop Item

Abdul Hamid, Rahimah and Ito, Teruaki (2017) B-code Generation for a CNC Dentistry Wire Bending Mechanism. In: International Symposium on Scheduling, 23-25 June 2017, Nanzan University, Nagoya, Japan.

Phuman Singh, Amrik Singh and Nishihara, Osamu (2017) Trajectory Generation and Tracking Using Integrated Control of 4WS and DYC for Minimum Jerk Obstacle Avoidance. In: Future Active Safety Technology toward zero traffic accidents, FAST-zero ’17, 18 September 2017, Nara, Japan.

Sarkawi, Hafez and Yoshito, Ohta (2017) Comparison of conventional LQR and LMI based LQR controller performance on the DC-DC Zeta converter with parameters uncertainty. In: The 4th Multi-symposium Control System 2017, 6-9 March 2017, Okayama, Japan.

Yunus, Ahmad Rozelan and Sedek, Muliati and Ibrahim, Ismail and Md Saad, Mohd Shamsuri (2017) Developing integrated profiling framework utilizing complex personality traits domains. In: International Conference of Religin, Microfinance and Community Empowerment 2017, 19-21 Julay 2017, Yogyakarta, Indonesia.

Thesis

Al-Kaiali, Suhaib Salam Muhammed Ahmed (2017) Impacts power flow and quality of penetrating 50MW wind plant into stand alone grid. Masters thesis, Universiti Teknikal Malaysia Melaka.

A. Hamid, Husna (2017) Physiochemical evaluation and tribological properties of eco-friendly biodegradable novel biolubricant from banana peel wastes. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

A.Rahman, Khairulnizam (2017) Analysis On QOS Parameters To Predict Http Response. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aaron, Yu Lung (2017) Optimisation of milling parameter and annealing condition for machining polyetheretherketones (PEEK) biomaterials implant. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab Aziz, Muhammad Azraei (2017) Development Of Iot Smart Home Controller Using Biosensor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab Ghani, Mohd Khairul Nizam (2017) Evaluation On Machining Performance Of AISI 1045 Steel Under Dry Condition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abbas, Thamer J. (2017) A layered behaviour model for electronic information sharing in Iraq intelligence networks. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abd Aziz, Muhammad Nazirul Ifwat (2017) Statistical Modelling And Optimization Of Input Process Parameters Variations In Silicon-On-Insulator MOSFET Device. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Aziz, Nurul Nadia (2017) Silicon Photonics Devices Based On Microring Resonator For Optical Interconnect System. Masters thesis, UTeM.

Abd Latif, Mohd Abrar (2017) Mechanical, physical and morphological properties of Kenaf fiber and natural filler reinforced polypropylene hybrid composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahim, Muhd Khairi (2017) Reduced torque ripple and switching frequency using optimal DTC switching strategy for open-end winding induction machines. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahman, Rozeana (2017) Improvement of change glue schedule down time at lid attachment process for semiconductor devices. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Razak, Nuur Farhani (2017) Malaysia Constitutional Law System, Study On The Use Advanced Searching Algorithm (Rule-Based And Horspool Algorithm). Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Latiff, Anisah (2017) Mechanical and tribological properties of recycled carbon fiber reinforced polypropylene composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Mubin, Norzul Masri (2017) Identify Human Error In Using Mobile Device That Lead To Security Threat. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rashid, Nur Saidatul Fatimah (2017) Friction and wear characteristics of bio-lubricant enhanced with hBN and PKAC additives. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Razak, Muhammad Raziman (2017) Effect Of Carbon Additives And Surfactant On Electrical Discharge Machining (EDM) Of Reaction-Bonded Silicon Carbide (RB-SiC). Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Adli Zil Ikram (2017) Optimization of MWCNT mixture in MicroPCM composite for thermal performance testing at different ambient temperature. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Rohana (2017) Human System Modelling For Labour Utilisation And Man-Machine Configuration At Cellular Manufacturing. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abod, Aminah (2017) Analyzing Wireless Network Signal Performance Of Melaka Putra Specialist Hospital Case Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Shah, Ismail (2017) Damage Mechanics Based Approach In Failure Prediction Of Draw Forming Processes. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abu-Khadrah, Ahmed Ismail Mohammad (2017) Performance evaluation and enhancement of EDCA protocol to improve the voice capacity in wireless network. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ahmed, Sharif Ahmed Qasem (2017) Design of circularly polarized rectenna with harmonic rejection capabiltity at 2.45 GHz for microwave energy transfer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al Azzam, Malik Bader Hasan (2017) Factors influencing medical professional adoption of electronic health record in Jordan Hospital. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Al-Hegazi, Ammar Abdullah Hussein (2017) A design of reconfigurable filtering-antenna for ultra-wideband applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali, Mustafa Sabah (2017) Al-Mus'haf Image Binarization By Using Threads. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali Salem, Amer Salem (2017) The mediating role of trust in the adoption of e-goverment services by community in the university of tripoli. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ali@Yusof, Ahmad Nazrin (2017) Energy simulation analysis for lighting in an academic building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Almangush, Hamida Mohamed (2017) Multilayer reversible data hiding via histogram shifting. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Annathurai, Vinodh (2017) Malaysian reference network modelling for photovoltaic impact study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aris, Farah (2017) Development Of Architecture For Pervasive Health Record In Mobile Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Asnor, Nur Hamizah (2017) Implementation Of Association Technique In Identify The Frequent Pairing Subject From Private Tutor Data. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azman, Faris (2017) Numerical simulation of defogging on automotive windshield. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Fadhlur Rahim (2017) The Adoption Of Halal Standards Towards The Performance Of Malaysian Food Manufacturing SMEs. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmin, Farah Ayuni (2017) A New Technique To Design Coating Structure For Energy Saving Glass Using The Genetic Algorithm. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bahari, Rohaizah (2017) A framework of games design for internet and e-commerce subject towards an effective learning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Baharin, Bahrom (2017) Thermal stress effect on disc brake rotor for NGV vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bingamawa, Muhammad Tosan (2017) Enhancing Accuracy Of Credit Scoring Classification With Imbalance Data Using Synthetic Minority Oversampling Technique-Support Vector Machine (SMOTE-SVM) Model. Masters thesis, Universiti Teknikal Malaysia Melaka.

Blar, Noraidah (2017) Preliminary investigation on the effectiveness of robotic teacher application in Malaysia technical education. Masters thesis, Universiti Teknikal Malaysia Melaka.

Che Khalid, Nor Syuhada (2017) Identifying Features Eligiblity For Blood Donors' Preferences Using Artificial Neural Networks Prediction Performances. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chong, Chee Soon (2017) PSO-tuned pid sliding surface of sliding mode control for an electro-hydraulic actuator system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Daeng Malintak, Mohd Yusuf (2017) Pembangunan Ekonomi Daerah : Pelaksanaan Undang Undang Hak Cipta Cakera Optik (Undang-Undang Nombor 29 Tahun 2004) Dalam Meningkatkan Prestasi Dalam Industri Kecil Dan Sederhana (IKS) Di Kota Pekanbaru Riau Indonesia. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Daud, Nadiah (2017) A Clinical Functional Requirements (CFR) domain library for elicit correct clinical requirements. Masters thesis, Universiti Teknikal Malaysia Melaka.

Daud, Sa'adah (2017) Improved gravitational search algorithm for optimal placement and sizing of distributed generation for power quality enhancement. Masters thesis, Universiti Teknikal Malaysia Melaka.

Desa, Siti Ramah (2017) A network design optimization for small sized institute of higher learning : a feasibility study at Cosmopoint College Melaka. Masters thesis, Universiti Teknikal Malaysia Melaka.

Eh Chu, Eentri (2017) Analysis on the effect of wing geometry on underwater glider hydrodynamics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Foo,, Jia En (2017) Positioning Control Of An Ironless Linear Motor With Continuous Motion Nominal Characteristic Trajectory Following Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gheidan, Abdelgader Agilah Saleh (2017) Investigation of effects of combustor wall thickness on the flame stabilization limits for micro combustors with wire mesh. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hamdan, Muhamad Hamiza (2017) An Analysis Of Computational Learning Models For Quit Rent Revenue Estimation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hasan, Mohd Nasran (2017) Analysis Email Filtering In Goverment Network. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Nurul Akmal (2017) Crypt Edge Detection Using PSO,Label Matrix And BI-Cubic Interpolation For Better Iris Recognition(PSOLB). Masters thesis, UTeM.

Hassan, Mohd Fadli (2017) Thermal Stability Effect On Physical And Flexural Properties Of Hybrid Glass/Jute Fiber Reinforced Epoxy Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Muhammad Haziq (2017) Pelaksanaan Sistem Jaminan Halal Dalaman Kategori Premis Makanan Di Negeri Melaka. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hazim Imad, Hazim (2017) The comparison study among optimization techniques in optimizing a distribution system state estimation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hirzan, Alauddin Maulana (2017) A New Approach Of Network Intrusion Detection In 6TO4 Tunneling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hj. Abd Halim, Mohd Tamri (2017) The electronic information sharing influence factors that affect the participant behavior of the secondary school teachers in Hulu Langat district. Post-Doctoral thesis, Universiti Teknikal Malaysia Melaka.

How, Whee Ching (2017) Hybrid POLCA in a job shop environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Asriana (2017) Modeling Of Dynamic Behavior In Closed Crack And Nonlinear Ultrasonic Array Imaging. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Mohamad Amran (2017) Enhancement of lean manufacturing implementation based on decision support system using simulation and intelligent agent. Masters thesis, Universiti Teknikal Malaysia Melaka.

Iman, Muhammad Naufal (2017) Validating Causal Effect Rules Using Cluster-Based Cohort Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Mohd Hairul Shah (2017) Analysis Effectiveness VOIP Over MPLS-IPVPN For State Government Network. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jaafar, Yusra Liyana (2017) Characterization Of Biomechanical Properties Of Articular Cartilage Across Synovial Joint. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jalil, Hayder Malik (2017) Modelling and protection of a 14 bus power system using power factory DigSilent software. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamal, Zalifh (2017) Dimension Reduction For Classification Using Principal Component Analysis (PCA) To Detect Malicious Executables. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jasmi, Muhammad Izzuddin (2017) Mathematical model of energy saving glass coating shape design using binary harmony search for better signal transmission. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamaruddin, Mohammad Aizrulshah (2017) Additive Manufacturing In Medical Application,A Comparative Study Between Conventionally Made Prosthesis (Pylon) And Fused Deposition Modelling Prosthesis (Pylon). Masters thesis, Universiti Teknikal Malaysia Melaka.

Karuppiah, K.Vasanthan (2017) Improving OEE data quality by automated data collection through identifying productivity potentials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kasim, Rizanaliah (2017) Battery Capacity Estimation Analysis Based On Time-Frequency Distribution. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khalik, Mohd Haffez (2017) Satellite Image Segmentation Using Thresholding Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lau, Cheiw Yun (2017) Impacts of solar photovoltaic system on distribution network performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lee, Cher Chia (2017) Modelling Of Wire Bonding Cu-Al Intermetallic Formation Growth Towards Interfacial Stress. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lee, Pey Jiuan (2017) Analysis of plastic material moisture absorption and dissipation characteristic for crystal rod holder design optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lew, Rose Ai Fen (2017) Factors Of Green Logistics Implementation In Malaysia A Study On A Global Logistics Provider. Masters thesis, Universiti Teknikal Malaysia Melaka.

Liew, Tye Leong (2017) Evolution sensor and develop the standard operation procedure temperature and humidity calibration method in calibration laboratory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Chin Chuan (2017) The Integation Of Speech Recognition Technique In Role-Playing Computer Game For Down Syndrome Children Mandrin Learning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Ming Siong (2017) Mold filling parameters in resin transfer molding for flip chip semiconductor packages. Masters thesis, Universiti Teknikal Malaysia Melaka.

Loh, Xiao Hui (2017) Compression Molded Kenaf/Polypropylene (K/PP) Composite : Determination Of Impact Properties Using Design Of Experiment (DOE) Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Low, Pei Sing (2017) Effect of stiffness nonlinearity on the transduction coefficient of a vibration based electromagnetic energy harvesting device. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahalingam, Sheila (2017) A new learner's security behavior model for m-learning in Malaysian higher education institution. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Main, Aspalilla (2017) The extension of organisational readiness model towards technology migration : A case of IPV6 migration. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Manaf, Fakhir Hussain (2017) Thermal comfort and energy consumption analysis for engineering laboratory building in UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Maria Amirtha Raj, Michel Raj (2017) Improving overall equipment effectiveness of tesec test handler on unloader jamming reduction at LPL testing area using DMAIC approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat, Irwan (2017) Effect Of Microwave Curing On Laminate Composites Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Ali, Noraini (2017) Characterization On Hybrid Circuit For Piezoelectric And Electromagnetic Energy Harvesting From Ambient Vibration Sources. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Harttar @ Mohd Hatta, Maziati Akmal (2017) Lead-free piezoelectric energy harvester based on optimised potassium sodium niobate thin film. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mat Kassim, Nabilah (2017) Real-Time Harmonic Signal Detection And Sources Location Identification System For Power Distribution System. Masters thesis, UTeM.

Matthew, Jachan (2017) Supply Chain Management Utilization Based On SCM Drivers In Manufacturing Industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Maureen, Gbefa Peremoboere (2017) Development of multi-agent based decision support student-lecturer appointment tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Din, Mohd Lizan (2017) Gloves holes defect evaluation by using electronic air leak testing machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Fauzi, Muhammad Fathi (2017) Development of a novel engine starter using a compression spring. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Yunos, Norhazwani (2017) Polynomial-Space Exact Algorithms For Traveling Salesman Problem In Degree Bounded Graphs. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Md Zaini, Syamimi (2017) Factors Influencing Collaboration Between Academic Researchers And Industry Practitioners For Commercialising Research Product. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Basir, Muhammad Sufyan Safwan (2017) A comparative study on time-frequency distribution techniques for battery parameters estimation system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Khairi, Nurul Nadirah (2017) Improved fuzzy-pid controller in following complicated path for lego mindstorms NXT. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Nor, Ahmad Fateh (2017) Voltage instability analysis of electric power systems using artificial neural network based approach. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Yusof, Humairak (2017) The Effect Of Storage Duration And Variance Temperature On High Blend Level Biodiesel Fuel Properties. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamed Jamil, Fathiah (2017) Multi-order PID controller design for active anti-roll suspension system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Hayder Salah (2017) Performance and degradation evaluation of grid-connected photovoltaic systems at UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed Napiah, Zul Atfyi Fauzan (2017) Characterization And Optimization Of Avalanche Photodiodes Fabricated By Standard Cmos Process For High-Speed High-Speed Photoreceivers. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fauzi, Afifah (2017) Characteristic Of Elderly People Hand And Its Effect To Walking Stick Handle:A Case Study In Malacca. Masters thesis, UTeM.

Mohd Foozy, Cik Feresa (2017) A simultaneous spam and phishing attack detection framework for short message service based on text mining approach. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ghazali, Sarah Nadiah (2017) Study on impact strength of composite between cement paste and corn husk ash. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Hamka, Nurhazimah (2017) A study on the awareness of Malaysia's manufacturing industries in implementing industry 4.0. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Hishamuddin, Mikail Lim (2017) The Influence Of Process Parameters Of Electrophoretic Deposition (EPD) Of Carbon Nanotubes (CNTs) On Brass Wire For Electrical Discharge Machining (EDM). Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Kassim, Mohammad Khairul Azmi (2017) Mechanical Properties Of Aluminium Alloy 1100 Series Thick And Thin Materials Welded Using Bobbin Friction Stir Welding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Faarih Farhan (2017) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Radzi, Muhamad Haffiz (2017) Fabrication Of Lead Free Piezoelectric Ceramics For Energy Harvesting Applications. Masters thesis, UTeM.

Mohd Rasip, Norhayati (2017) The use of heuristic ordering and particle swarm optimization for nurse scheduling problem. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sabri, Muhammad Ihsan (2017) Surface electromyography (SEMG) normalization method based on pre fatigue maximal voluntary contraction. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Samsuddin, Noorazizi (2017) Optimization of drill geometry design for orthopedic surgical application in dry drilling condition. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sanusi, Mohammad Hamdan (2017) Deformation Of L-Shaped Aerospace Composite Components. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shafie, Abdul Muhaimin (2017) CFD analysis of intake flow in the L-head engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zain, Rasuan (2017) Hybrid Genetic Algorithm On Predicting Next Rainfall Distribution. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muchamad, Masduki Khamdan (2017) Expert System Shell Based On AIML And FAQ. Masters thesis, Universiti Teknikal Malaysia Melaka.

Musa, Nurul Farahin (2017) Rhetorical structure of technical research articles. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muslim, Zulkiflee (2017) Significant Feature Identification Mechanism For Ipv6 In Enhancing Intrusion Detection System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mustafa, Ashafi'e (2017) Selection And Optimization Of Kenaf/Epoxy Composite As An Alternative Friction Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nagalingam, Ravichandran (2017) Enhancing manufacturing efficiency through establishing an excellence operating system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naji, Ihab Munther (2017) Investigation on waste materials as thermal insulation for building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Napis, Nur Faziera (2017) Network Reconfiguration And Distributed Generation Sizing In Radial Distribution System Using Improved Evolutionary Particle Swarm Optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Narayanasami, Jayaganasan (2017) Preparation & characterization of electrophoretically deposited BN film for semiconductor package. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Lin Feng (2017) Fatigue Life Characteristic Of Hybrid Kenaf/Glass Fibre Reinforced Metal Laminates. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ngadiman, Yunos (2017) Determining management factors of overall equipment efficiency in selected Malaysian public universities. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ngah Nasaruddin, Afiqah (2017) Low cost natural convection solar dryer for drying durian tree wood. Masters thesis, Universiti Teknikal Malaysia Melaka.

Noh, Nalizawati (2017) Implementation parallel firewall at Cosmopoint Melaka to improve performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norazni, Nor Shazwan Azrul (2017) Simulation study on transverse vibration for automotive absorber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norfauzi, Tamin (2017) Differentiation analysis of surface integrity and wear mechanism AISI 1045 machinability assesment under wet and dry condition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norizan, Muhammad Alif (2017) Relationship investigation of handgrip forces with varied wrist angles using forearm EMG for bionic hand. Masters thesis, Universiti Teknikal Malaysia Melaka.

Omar, Noor Rawaida (2017) Regression models of muscle activity, psychophysical experience and heart rate in manual lifting task. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ong, Ming Chung (2017) Determination of electrical measurement to detect poor thermal dissipation devices using TRIZ. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ong, Teik Kean (2017) Characterization of wideband antenna with split ring resonator on hybrid material for WLAN application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ooi, Choon Kiat (2017) Comparison Of PLC Based Servo Pneumatic System Performance Using PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Muhamad Naim (2017) Multi-Objectives Optimization Of Energy Consumption Of IKM Bintulu Buildings Towards Energy Saving. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Nur Amirah (2017) A Fundamental Study Of Surface Discharge Characteristics On Pressboard Immersed In Ester Oil For Power Transformer Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Nur Fadzilah (2017) Motivational factors in privacy protection behaviour model for social networking sites. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Palaniappan, P Siva Shamala (2017) Information quality structure framework in developing an information security management system (ISMS). Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Pradana, Aditya (2017) Intelligent conversational bot for interactive marketing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rafan, Nur Aidawaty (2017) Stick Slip Friction Models Control Design Approach For Friction Compensation In Machine Tools Drive System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rahim, Siti Lydia (2017) Study Of The Implementation Of Additive Manufacturing At PROTON Using Analytic Hierarchy Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Raja Ikram, Raja Rina (2017) Integrated health information systems framework in post natal care for modern and traditional Malay medicine. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ramahlingam, Sundram (2017) Improved Direct Torque Control (DTC) Performances Of Induction Machine Using Cascaded H-Bridge Multilevel Inverter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramalingam, Premnathan (2017) To eliminate icing and condensation in temperature cycling chambers. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramle, Zuraimi (2017) Optimization of injection moulding parameters for recycled high density polyethylene. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rasidi, Mohd Kamarul Shaufi (2017) Hardfacing process of Ni-WC on gray cast iron substrate using GMAW method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razak, Mohd Kamal Tarmizi (2017) Propose New Framework For Network Performance Testing Strategy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razali, Muhammad Zuhaili (2017) Proton exchange membrane fuel cell (PEMFC) parameters estimation using time-frequency analysis technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rohman, Muhammad Syaifur (2017) Workload performance evaluation of large spatial database for DSS based disaster management. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ruslan, Siti Nur Azrreen (2017) A rule-based reasoning technique on mathematics tutor design for children with autism. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saedin, Mohd Rizal (2017) Green Supplier Model For Composite Manufacturing Industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safady, Hammam M. H. (2017) Industrial robotics in the lean enterprise : a case study in semi-conductor company. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safei, Suhailan (2017) An integrated model of automated elementary programming feedback using assisted and recommendation approach. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Saghir Zobilah, Abdullah Mohammed (2017) Design and analysis of multiband isolation RF switch using transmission line stub resonators for WiMAX and LTE applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sahib, Taha Jabbar (2017) Optimum distributed generation allocation using modified particle swarm optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saifullah, Nasrullah (2017) Integration of wideband low noise amplifier with notch filter using defected microstrip structure. Masters thesis, Universiti Teknikal Malaysia Melaka.

Samsudin, Anuar (2017) Agile decision making approach to enhance information management for flood impact. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sarasjati, Wendy (2017) Determining prominent research area and expertise from scholarly data using spherical K-Means algorithm and scholar ranking model. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saraswati, Galuh Wilujeng (2017) Anfis Modelling On Diabetic Ketoacidosis For Unrestricted Food Intake Conditions. Masters thesis, Universiti Teknikal Malaysia Melaka.

Selvam, Manimaran (2017) Investigation Of Modified Shielded Metal Arc Welding (MOSMAW) For Weld Penetration Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Semposothy, Sevasothy (2017) Investigation On Vision Lead Over Rejection For D-PAK Package At Testing Operation Using Seven Quality Control Tools. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shahrin, Abdullah Azam (2017) Malware Removal Tools Using Indicators Of Compromise (IOCs). Masters thesis, Universiti Teknikal Malaysia Melaka.

Shamshiri, Mesyam (2017) Future distribution network planning with demand response applications. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Shuhimi, Fairuz Fazillah (2017) Wear failure analysis of empty fruit bunch and kenaf fibres composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Soib, Erizman (2017) Enhanced Online Question Bank Management System For Efficient Of Exam Paper. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sri Winarsih, Nurul Anisa (2017) Improving Bahasa Melayu text-to-speech system using unit-selection method : UTeM health centre case. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sriwindono, Haris (2017) Examining a technology acceptance model of intention to use internet by a academics within Indonesia higher learning institution. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Su, Muhammad Nasiruddin (2017) Energy Absorption Analysis Of Low Speed Frontal Impact For Bumper Beam Through Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sukri, Mohamad Firdaus (2017) Simulation And Analysis Of A Direct Current Operated Automotive Air-Conditioning System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tajry, Mohd Zulhairi (2017) Development Of Cutter Geometrical Feature For Machining Thin Wall Part. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Lay Hong (2017) Sustainable banking implementation in Maybank growth. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

TeO, Boon Yan (2017) Analyzing The Impact Of Swarm Size And Peer Uplink Capacity For Bit Torrent Networking Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teh, Teck Guan (2017) Enhance Keystroke Dynamic For Online Based System. Masters thesis, Universiti Teknikal Malaysia Melaka.

W Azlan, Wan Amirah (2017) Objective quantification of selective attention in schizophrenia a hybrid TMS – EEG approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wahid, Siti Zaleha (2017) rHDPE-rPP Hybrid Blends From Injection Molding Scrap : Characterization For Conventional Milling Workpiece Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, John Huang Ung (2017) Vacuum System Assisted Fused Deposition Modeling To Improve Parts Tensile Strength. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Kylie Muh Shin (2017) Sound Absorption Characteristics Of Spent Tea Leaf Fiber-Rubber Composite Materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Tee Foo (2017) Design of electrical distribution system for industrial plant. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yahya, Abu Bakar (2017) Pilot Study Of Electromyography Analysis Of The Arm Muscle Using Levenberg-Marquadt Back Propagation Neural Network. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yew, Wansin (2017) Study of biomechanical properties of articular cartilage using low-field magnetic resonance imaging. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yuri, Nur Fatin Izzati (2017) Facial Drowsiness Signs Detection Algorithm Using Image Processing Techniques For Various Lighting Condition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yusri, Izzati (2017) Rotary motion characterization of tubular single excitation switched reluctance actuator. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yusup, Muhamad Zaki (2017) Integration model of lean and cleaner production for sustainable and responsive manufacturing in Malaysia. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Zahri, Nuradilah (2017) Development of mathematical model for muscle activity, psychophysical experience and heart rate during manual load carrying. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Hikmah (2017) Impact test simulation of automotive wheel rim using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainul Abidin, Siti Nursyafiqa (2017) Development Of Simulator Training Centre For The Manufacturing Of Automative Seating. Masters thesis, Universiti Teknikal Malaysia Melaka.

Technical Report

Chong, Shin Horng and Abdul Rahim, Ruzairi and Md Ghazaly, Mariam and Jaafar, Hazriq Izzuan and Shukor, Ahmad Zaki and Mohd Mokhtar, Rosmiwati (2017) Investigation Of Practical And Simple Design Procedure For Robust Control Of A Pneumatic Muscle Actuated System. [Technical Report] (Submitted)

Ghazali, Rozaimi and Sulaima, Mohamad Fani and Ab. Ghani, Mohd Ruddin and Othman, Md Nazri and Jali, Mohd Hafiz (2017) Knowledge Transfer Of Aedes Larvae Control System For Dengue Outbreak To A Local Authority Company. [Technical Report] (Submitted)