Items where Year is 2021

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 626.

Article

A Subki, A Shamsul Rahimi and Manap, Zahariah and Mohd Tumari, Mohd Zaidi and Jidin, Aiman Zakwan and Saat, Shahrizal and Zainal Abidin, Amar Faiz and Saealal, Muhammad Salihin (2021) Analysis On Three Phase Cascaded H-Bridge Multilevel Inverter Based On Sinusoidal And Third Harmonic Injected Pulse Width Modulation Via Level Shifted And Phase Shifted Modulation Technique. International Journal of Power Electronics and Drive Systems, 12 (1). pp. 160-169. ISSN 2088-8694

A. Mostafa, Salama and Al-Azzawi, Ziadoon Kamil Maseer and Bahaman, Nazrulazhar and Yusof, Robiah and Musa, Omar and Al-rimy, Bander Ali Saleh (2021) DeepIoT.IDS: Hybrid deep learning for enhancing IoT network intrusion detection. Computers, Materials and Continua, 69 (3). pp. 3945-3966. ISSN 1546-2218

A. Perumal, Puvanasvaran and Karuppiah, Karmegam and Lim, Eu Sheng (2021) Validation Of Improvement In Changeover Of Die Bond Process Using Basicmost Technique. Songklanakarin Journal of Science and Technology, 43 (5). pp. 1299-1304. ISSN 0125-3395

AL-Gburi, Ahmed Jamal Abdullah and Mohd Ibrahim, Imran and Abdulhameed, M. K. and Alwareth, Husam Abdulqudos Ahmed and Zeain, Mohammed Yousif and Nayyef, Nawres Abbas and Zakaria, Zahriladha and Khaleel, Aymen Dheyaa and Keriee, Hussam Hamid (2021) A Compact UWB FSS Single Layer With Stopband Properties For Shielding Applications. Przeglad Elektrotechniczny, 97 (3). pp. 165-168. ISSN 0033-2097

Ab Ghani, Sharin and Ahmad Khiar, Mohd Shahril and Sutan Chairul, Imran and Zamir, Muhammad Imran (2021) Effect of repeated electrical breakdowns on mineral and natural ester insulating oils. Bulletin of Electrical Engineering and Informatics, 10 (6). pp. 2989-2996. ISSN 0208-9319

Ab Ghani, Sharin and Sutan Chairul, Imran and Ahmad Khiar, Mohd Shahril and Johal, Muhammad Syahrani and Ab Aziz, Nur Hakimah and Azmi, Mohd Aizzat (2021) Effect Of Electrical Discharge On The Properties Of Natural Esters Insulating Fluids. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (3). pp. 1281-1288. ISSN 2502-4752

Ab. Ghani, Hadhrami and Besar, Rosli and Md. Sani, Zamani and Kamaruddin, Mohd Nazeri and Syahali, Syabeela and Mohamed Daud, Atiqullah and Martin, Aerun (2021) Advances in lane marking detection algorithms for all-weather conditions. International Journal of Electrical and Computer Engineering, 11 (4). pp. 3365-3373. ISSN 2088-8708

Abbas Tamadon and Pons, Dirk John and Don Clucas and Sued, Mohammad Kamil (2021) Internal flow behaviour and microstructural evolution of the bobbin-FSW welds: thermomechanical comparison between 1xxx and 3xxx aluminium grades. Advances In Materials Science, 21 (2(68)). pp. 40-64. ISSN 2083-4799

Abbasi, Muhammad Inam and Ismail, Muhammad Yusof and Kamarudin, Muhammad Ramlee and Qammer, H. Abbasi (2021) Reconfigurable Reflectarray Antenna: A Comparison Between Design Using PIN Diodes And Liquid Crystals. Wireless Communications and Mobile Computing, 2021. pp. 1-8. ISSN 1530-8669

Abbasi, Muhammad Inam and Raza, Ali and Lin, Wenbin and Ishfaq, Muhammad Kamran and Masud, Farhan and Dahri, Muhammad Hashim (2021) A wideband reflector-backed antenna for applications In GPR. International Journal of Antennas and Propagation, 2021. pp. 1-10. ISSN 1687-5869

Abd Aziz, Siti Fardaniah and Selamat, Mohd Nasir and Mukapit, Mukhiffun and Baker, Rogis and Jaaffar, Amar Hisham (2021) The analysis of ergonomic task demand and psychosocial work factors towards occupational safety and health. International Journal of Academic Research in Accounting, Finance and Management Sciences, 11 (3). pp. 191-205. ISSN 2225-8329

Abd Gani, Shamsul Fakhar and A Aziz, Khairul Azha and Kamalrudin, Massila and Miskon, Muhammad Fahmi and Hamzah, Rostam Affendi and Kadmin, Ahmad Fauzan and Jidin, Aiman Zakwan and Md Basar, Mohd Farriz and A Razak, 'Eizza Noor Sabrina and Md Ali Shah, M. A.S. (2021) Electrical Appliance Switching Controller By Brain Wave Spectrum Evaluation Using A Wireless EEG Headset. International Journal of Emerging Technology and Advanced Engineering, 11 (10). pp. 109-117. ISSN 2250-2459

Abd Razak, Jeefferie and Hasib, Hazman and Ismail, Mohd Muzafar and Khalid, Nor Aisah and Mahamood, Mazlin Aida and Mohamad, Noraiham and Puspitasari, Poppy and Flaifel, Moayad Husein (2021) Electrical Conductivity And Antenna Properties Of Polyaniline Filled GNPs Nanocomposites. Malaysian Journal on Composite Science and Manufacturing, 4 (1). pp. 11-27. ISSN 2716-6945

Abd. Latif, Mohd Juzaila and Suarin, Mohd Azizan and Zakaria, Mohamad Shukri and Harun, Muhamad Noor and Nguyen, H.Q. (2021) Effects Of Total Disc Replacement On Range Of Motion And Facet Stress In Lumbar Spine Using A Finite Element Analysis. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 263-274. ISSN 1985-5761

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Nordin, Mohamad Jabbar (2021) Effect Of Fibre Length And Composition On The Tribological Attributes Of Oil Palm Fibre Polymeric Composite: Organic Brake Friction Material. Industrial Lubrication and Tribology, 73 (4). pp. 614-620. ISSN 0036-8792

Abdul Halim, Abdul Qayyum and Tee, Boon Tuan and Wan Mat Zain, Wan Shah Waliallah (2021) Face Bypass Damper Application To Overcome Air Conditioning Oversizing Issue. Evergreen, 8 (3). pp. 686-692. ISSN 2189-0420

Abdul Hamid, Mohd Syaiful Rizal and Chew, Boon Cheong and Masrom, Nor Ratna and Mazlan, Nur Athirah and Shamsuddin, Alina (2021) Sustainable development practices in services sector: a case of the Palace Hotel from Malaysia. Evergreen, 8 (4). pp. 693-705. ISSN 2189-0420

Abdul Hamid, Nurfaizey and Akop, Mohd Zaid and Masripan, Nor Azmmi and Wasbari, Faizil and Abdul Munajat, Nurain and Mohamad Wazir, Azmil Arif and Jaafar, Juhana and Othman, ‎Mohd Hafiz Dzarfan and Tucker, Nick (2021) Determination of optimal electrospinning distance and applied voltage for polyacrylonitrile electrospun fibre production. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 201-212. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Mansor, Muhd Ridzuan and Mohamad Wazir, Azmil Arif and Nassiruddin, Muhammad Amirul Adli and Noordin, Aminurrashid and Tucker, Nick (2021) Design and development of domestic cyclone dust collector system using TRIZ and CCD method. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 177-190. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Mustafa, Zaleha and Mohamad Wazir, Azmil Arif and Razali, Nadlene and Jaafar, Juhana and Tucker, Nick (2021) Investigation on fibre diameter, wettability and tensile behaviour of electrospun polyacrylonitrile nanofibres. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 213-224. ISSN 1985-5761

Abdul Hamid, Nurfaizey and Salim, Mohd Azli and Md. Saad, Adzni and Mohd Rosli, Mohd Afzanizam and Abdul Munajat, Nurain and Esa, Siti Rahmah and Tucker, Nick (2021) Preparation, characterization, and electrical conductivity investigation of multi-walled carbon nanotube-filled composite nanofibres. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 191-200. ISSN 1985-5761

Abdul Kadir, Aida Fazliana and Mupangat, Hanisah and Rasin, Zulhani and Mat Said, Dalila (2021) Reactive Power Analysis At Solar Power Plant. Jurnal Teknologi, 83 (2). pp. 47-55. ISSN 0127-9696

Abdul Latiff, Anas and Mohd Badari, Muhammad Khairul Ikhwan and Haroon, Hazura and Ab Rahman, Mohd Fauzi and Fatheli, Mohamad Haireen and Sammsamnun, F. S.M. (2021) Q-switched fibre laser using Samarium oxide for C-band region. Journal Of Optoelectronics And Advanced Materials, 23 (7-8). pp. 307-312. ISSN 1454-4164

Abdul Latiff, Anas and Mohd Rusdi, Muhammad Farid and Rosol, Ahmad Haziq Aiman and Harun, Sulaiman Wadi and Jafry, Afiq Arif Aminuddin and Kasim, Nabilah and Ab Rahman, Mohd Fauzi and Abdul Khudus, Muhammad Imran Mustafa and Ahmad, Harith (2021) Generation Of Q-Switched Fiber Laser At 1.0-, 1.55-And 2.0-µM Employing A Spent Coffee Ground Based Saturable Absorber. Optical Fiber Technology, 61. pp. 1-10. ISSN 1068-5200

Abdul Munir, Fudhail and Musthafah, Mohd Tahir and Mohd Ridzuan Tan, Nurfarah Diana and Saputro, Herman and Mikami, Masato (2021) Preliminary Investigation Of Using DBD Plasma For Application In Micro Combustors. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 105-112. ISSN 2289-7879

Abdul Rahman, Abdul Rashid and Md Din, Muhamad Faiz and Wang, Jianli and Hassan, Muhammad Zahir and Suhaimi, Nur Sabrina and Idris, Nurul Hayati and Dou, Shi Xue and Ismail, Mohammad and Jusoh, Mohd Taufik (2021) Magnetism and thermomechanical properties in Si substituted MnCoGe compounds. Crystals, 11 (6). pp. 1-10. ISSN 2073-4352

Abdul Rashid, Nurulizwa and Ketimin, Susandra and Al-Shami, Samer Ali Hussein (2021) An Insight Of Customer's Behavior Intention To Use Self-Service Kiosk In Melaka Fast Food Restaurant. Journal Of Technology Management And Technopreneurship, 9 (1). pp. 13-24. ISSN 2289-8158

Abdul Rasib, Amir Hamzah and Musazali, Mussyahirah (2021) Formulation Of Nao Equation According To Nao Framework. Turkish Journal of Computer and Mathematics Education, 12 (3). pp. 5042-5050. ISSN 1309-4653

Abdul Rasib, Amir Hamzah and Wakhi Anuar, Nur Farah Bazilah and Abdullah, Rohana and Noor, R. M. and Mohamad Rafaa, Z. F. (2021) Production Smoothness Improvement Through Arena Application In The Food Manufacturing Industry. Turkish Journal of Computer and Mathematics Education, 12 (3). pp. 3516-3526. ISSN 1309-4653

Abdul Rasid, Ahmad Fuad and Yang Zhang (2021) Comparison Of The Burning Of A Single Diesel Droplet With Volume And Surface Contamination Of Soot Particles. Proceedings of the Combustion Institute, 38 (2). pp. 3159-3166. ISSN 1540-7489

Abdul Shukor, Fairul Azhar and Md Zuki, Nor Aishah and Mohd Nasir, Nur Ashikin and Raja Othman, Raja Nor Firdaus Kashfi (2021) Design of the segmented-type switched reluctance linear synchronous motor (SSRLSM) for domestic lift application. Progress in Electromagnetics Research C, 108. pp. 13-22. ISSN 1937-8718

Abdullah, Abdul Rahim and Tengku Zawawi, Tengku Nor Shuhada and Shair, Ezreen Farina and Mohd Saad, Norhashimah and Sudirman, Rubita (2021) Musculoskeletal Disorder Analysis-Advanced In Medical Technology: Short Review. Asian Journal of Medical Technology, 1 (1). pp. 46-59. ISSN 2682-9177

Abdullah, Mardina and Mohammad, Sulaiman Ali and Ahmad, Mohd Riduan and Shamsul Baharin, Shamsul Ammar and Park, S J and Cooray, Vernon (2021) Azimuth and elevation factors correction for single station lightning electromagnetic field sensor. Geografia Malaysian Journal of Society and Space, 17 (4). pp. 378-392. ISSN 2682-7727

Abdullah, Mohd Mawardy and Mohamad, Siti Nurul Mahfuzah and Salam, Sazilah and Hashim, Hasmaini (2021) Enhancing Self-Assessment Using Social Learning Strategies And Learner Characteristic Factors In Massive Open Online Courses (MOOCS) For Language Learning. ARPN Journal of Engineering and Applied Sciences, 16 (16). pp. 1678-1688. ISSN 1819-6608

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Ramli, Faiz Redza and Mohamad Norani, Mohamad Nordin (2021) Mechanical And Tribological Properties Of FFF 3D-Printed Polymers: A Brief Review. Jurnal Tribologi, 29. pp. 11-30. ISSN 2289-7232

Abdullah, Norida and Mohammad Rawi, Ali Hafizar and Ariffin, Hafzan and Abdullah, Mohd Firdaus (2021) Hubungan Antara Personaliti Dan Persepsi Terhadap Tingkahlaku Kerja Tidak Produktif Dalam Kalangan Pekerja Industri: Kajian Literatur (Relationship Between Personalities And Perceptions Towards Unproductive Behavior Among Industrial Workers: A Literature Reviews). Journal of Human Capital Development, 14 (1). pp. 1-16. ISSN 2289-8115

Abdullah, Norli and Mohamad, Imran Syakir and N.M., Nurazzi and M.M., Harussani and N.D., Siti Zulaikha and A.H., Norhana (2021) Composites Based On Conductive Polymer With Carbon Nanotubes In DMMP Gas Sensors – An Overview. Polimery/Polymers, 66 (2). pp. 85-97. ISSN 0032-2725

Abdullah, Norli and Mohamad, Imran Syakir and N.M., Nurazzi and S.Z.N., Demon and N.A., Halim (2021) Carbon Nanotubes-Based Sensor For Ammonia Gas Detection – An Overview. Polimery/Polymers, 66 (3). pp. 175-186. ISSN 0032-2725

Abdullah, Norli and Norizan, Mohd Nurazzi and Ngah Demon, Siti Zulaikha and Abdul Halim, Norhana and Mohd Azmi, Ahmad Farid and Victor Ernest, Victor Feizal Knight and Mohamad, Imran Syakir (2021) The frontiers of functionalized graphene-based nanocomposites as chemical sensors. Nanotechnology Reviews, 10 (1). pp. 330-369. ISSN 2191-9097

Abu, Maisarah and Md Ali, Siti Adlina and Zabri@Suhaimi, Siti Normi and Hamzah, Shipun Anuar (2021) Wide-Band Metamaterial Perfect Absorber Through Double Arrow Shape Printed On A Thin Dielectric. Bulletin of Electrical Engineering and Informatics, 10 (5). pp. 2488-2495. ISSN 2089-3191

Abu, Md Sahrom and Ariffin, Aswami and Yusof, Robiah and Selamat, Siti Rahayu (2021) Formulation Of Association Rule Mining (ARM) For An Effective Cyber Attack Attribution In Cyber Threat Intelligence (CTI). International Journal Of Advanced Computer Science And Applications (IJASCA), 12 (4). pp. 134-143. ISSN 2158-107X

Abu, Nur Azman (2021) An efficient 2048-bit block cipher. Malaysian Journal of Mathematical Sciences, 15 (ISI). pp. 141-167. ISSN 1823-8343

Abu Bakar, Mohd Hadzley and Ab Wahab, Norfariza and Azhar, Anis Afuza and Adam, Abdul Aziz and Herawan, Safarudin Gazali and Thongkaew, Kunlapat and Fairuz, M. R. (2021) Effect of laser parameters on the surface cleaning of galvanised steel by laser engraving process. International Journal of Nanoelectronics and Materials, 14 (ISI). pp. 123-134. ISSN 1985-5761

Abu Bakar, Norazhar and Sutan Chairul, Imran and Othman, Md Nazri and Ab Ghani, Sharin and Ahmad Khiar, Mohd Shahril (2021) Potential Of Used Cooking Oil As Dielectric Liquid For Oil-Immersed Power Transformers. IEEE Transactions on Dielectrics and Electrical Insulation, 28 (4). pp. 1400-1407. ISSN 1070-9878

Agung Budi Prasetio and Mohd Aboobaider, Burhanuddin and Ahmad, Asmala (2021) Assessing Impact Of Triple Helix Variables To Knowledge Transfer Variable And Innovation Systems. Turkish Journal of Computer and Mathematics Education, 12 (4). pp. 1690-1700. ISSN 1309-4653

Ahamat, Amiruddin (2021) Patterns Of Sustainopreneurship In Green Technology Ventures: The Conceptual Study. Journal Of Technology Management And Technopreneurship, 9 (1). pp. 25-31. ISSN 2289-8158

Ahamat, Amiruddin and Mohamad Sharif, Sabri and Masrom, Nor Ratna and Che Aziz, Che Nurul Azni and Shahkat Ali, Muhamad Sham (2021) Examining The Characteristics Of Academic Entrepreneurs: The Case Of Malaysian Technology Driven University. Journal of Technical Education and Training, 13 (2). pp. 61-73. ISSN 2229-8932

Ahmad, Asmala and Sakidin, Hamzah and Abu Sari, Mohd Yazid and Mat Amin, Abd Rahman and Sufahani, Suliadi Firdaus and Rasib, Abd Wahid (2021) Naïve Bayes Classification Of High-Resolution Aerial Imagery. International Journal of Advanced Computer Science and Applications, 12 (11). pp. 168-177. ISSN 2158-107X

Ahmad, Badrul Hisham and Zolkefli, Amirul Aizat and Shairi, Noor Azwan and Othman, Adib and Zakaria, Zahriladha and Mohd Ibrahim, Imran and A. Majid, Huda (2021) SPDT discrete switch design using switchable SIW resonators for millimeter wave MIMO transceiver. Indonesian Journal of Electrical Engineering and Computer Science, 24 (3). pp. 1542-1549. ISSN 2502-4752

Ahmad, Fauzi and Haris, Sharil Izwan and Mat Yamin, Ahmad Kamal and Che Hasan, Mohd Hanif and Mat Nuri @ Md Din, Nur Rashid (2021) Self Tuning PID Control Of Antilock Braking System Using Electronic Wedge Brake. International Journal of Automotive and Mechanical Engineering, 18 (4). pp. 9333-9348. ISSN 2229-8649

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2021) Rheological and morphological properties of oil palm fiber-reinforced thermoplastic composites for fused deposition modeling (FDM). POLYMERS, 13 (21). 01-14. ISSN 2073-4360

Ahmad, Rabiah and Al-Mhiqani, Mohammed Nasser Ahmed and Zainal Abidin, Zaheera and Abdulkareem, Karrar Hameed and Mohammed, Mazin Abed and Gupta, Deepak K. and Shankar K. (2021) A new intelligent multilayer framework for insider threat detection. Computers and Electrical Engineering, 97. pp. 1-23. ISSN 0045-7906

Ahmad, Sabrina and A. Jalil, Intan Ermahani and Putra Herawan, Adhitia (2021) A systematic literature review on regression test case prioritization. International Journal Of Advanced Computer Science And Applications, 12 (9). pp. 253-267. ISSN 2156-5570

Ahmad, Sabrina and Asmai, Siti Azirah and Abdullah, Rosmiza Wahida and Seok, Won Lee and Mat Zain, Zarina (2021) Research efforts and challenges in crowd-based requirements engineering: A review. International Journal Of Advanced Computer Science And Applications, 12 (9). pp. 395-402. ISSN 2156-5570

Ahmad Izzuddin, Tarmizi and Mat Safri, Norlaili and Othman, Mohd Afzan (2021) Compact Convolutional neural network (CNN) based on SincNet for end-to-end motor imagery decoding and analysis. Biocybernetics And Biomedical Engineering, 41 (4). pp. 1629-1645. ISSN 0208-5216

Ahmad Radzi, Syafeeza and Ali, Nur Alisa and Ja'afar, Abd Shukur and Shamsuddin, Syamimi and Kamal Nor, Norazlin (2021) LSTM-based electroencephalogram classification on autism spectrum disorder. International Journal of Integrated Engineering, 13 (6). pp. 321-329. ISSN 2229-838X

Ahmad Radzi, Syafeeza and Ramli, Nur Syahindah Husna and Abdul Hamid, Norihan and Wong, Yan Chiew and Ramlan, Atikah Raihan (2021) Functional magnetic resonance imaging for autism spectrum disorder detection using deep learning. Jurnal Teknologi, 83 (3). pp. 45-52. ISSN 0127-9696

Ahmad Safian, Asraf Hadzwan and Robani, Anidah and Sedek, Muliati (2021) The Motivations And Barriers Of Teachers’ Professional Development Activities During The Movement Control Order (MCO) – A Preliminary Insight. International Journal of Learning, Teaching and Educational Research, 20 (11). pp. 42-56. ISSN 1694-2116

Akop, Mohd Zaid and Jikol, Favian and Salim, Mohd Azli and Mohamed Arifin, Yusmady (2021) A study of steady-state thermal distribution on circular plate using ANSYS. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 479-488. ISSN 1985-5761

Akop, Mohd Zaid and Lai, Tian Wei and Salim, Mohd Azli and Mohd Rosli, Mohd Afzanizam and Abdul Hamid, Nurfaizey and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Mohamed Arifin, Yusmady and Herawan, Safarudin Gazali (2021) A Simulation Study On Performance Of Photovoltaic Thermal Water (PVTW) Collector Under Different Loading Of Mass Flow Rate Using ANSYS Fluent. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 467-478. ISSN 1985-5761

Akop, Mohd Zaid and Shehab, Salem Saleh Omar and Mohamed Arifin, Yusmady and Salim, Mohd Azli and Masripan, Nor Azmmi and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Md. Saad, Adzni and Herawan, Safarudin Gazali (2021) An experimental study on effect of light intensity to indoor air temperature and humidity. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 457-466. ISSN 1985-5761

Al Gburi, Ahmed Jamal Abdullah and Ibrahim, Imran and Zakaria, Zahriladha (2021) An ultra-miniaturized MCPM antenna for ultra-wideband applications. Journal Of Nano And Electronic Physics, 13 (5). pp. 1-4. ISSN 2077-6772

Al-Gburi, Ahmed Jamal Abdullah and Mohd Ibrahim, Imran and Zakaria, Zahriladha and Mohd Nazli, Nur Farzana (2021) Wideband Microstrip Patch Antenna For Sub 6 GHZ And 5G Applications. Przeglad Elektrotechniczny, 97 (11). pp. 26-29. ISSN 0033-2097

Al-Gburi, Ahmed Jamal Abdullah and Mohd Ibrahim, Imran and Zakaria, Zahriladha and Zeain, Mohammed Yousif and Ahmad, Khalid Subhi and Abdulhameed, M. K. and Saeidi, Tale (2021) A Miniaturised UWB FSS With Stop-Band Characteristics For EM Shielding Applications. Przeglad Elektrotechniczny, 97 (8). pp. 142-145. ISSN 0033-2097

Al-Kumaim, Nabil Hasan and Al-Shami, Samer Ali Hussein and Muhamad, Salman Al Farisi and Hassan, Siti Hasnah and K. Alhazmi, Abdulsalam and Hishan, Sanil S. and Shabbir, Muhammad Salman and A. Gazem, Nadhmi and Mohammed, Fathey and Abu Al-Rejal, Hussein Mohammed (2021) Fostering a clean and sustainable environment through green product purchasing behavior: Insights from Malaysian consumers’ perspective. Sustainability (Switzerland), 13 (22). pp. 1-17. ISSN 2071-1050

Al-Kumaim, Nabil Hasan and Alhazmi, Abdulsalam K. and Mohammed, Fathey and Gazem, Nadhmi A. and Shabbir, Muhammad Salman and Fazea, Yousef (2021) Exploring the impact of the covid-19 pandemic on university students’ learning life: An integrated conceptual motivational model for sustainable and healthy online learning. Sustainability (Switzerland), 13 (5). pp. 1-20. ISSN 2071-1050

Al-Mola, Mohammed Hussin Ahmed and Salim, Mohd Azli and Mailah, Musa (2021) Applying active force control with fuzzy self-tuning PID to improve the performance of an antilock braking system. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 489-501. ISSN 1985-5761

Al-Shami, Samer Ali Hussein and Abdul Rashid, Nurulizwa and Al Mamun, Abdullah and Ahmed, Elsadig Musa (2021) Artificial intelligent towards hotels’ competitive advantage. An exploratory study from the UAE. FORESIGHT, 24 (5). pp. 1-12. ISSN 1463-6689

Al-Shami, Samer Ali Hussein and Abdullah Al Mamun and Abdul Rashid, Nurulizwa and Mohammed Al-shami (2021) Microcredit Impact On Socio-Economic Development And Women Empowerment In Low-Income Countries: Evidence From Yemen. Sustainability, 13 (16). pp. 1-17. ISSN 2071-1050

Al-Shami, Samer Ali Hussein and Al Hammadi, Abdulla and Abdul Raheem, Hayder Adil and Al-Hammadi, Abdul Hadi and Abdul Rashid, Nurulizwa and Ali Alhammadi, Dheyab Eissa Badr (2021) Online social networking websites in innovation capability and hotels’ performance in Malaysia. Journal Of Hospitality And Tourism Technology, 12 (1). pp. 72-84. ISSN 1757-9880

Al-Shami, Samer Ali Hussein and Alkhoori, Ahmed Abdulqader and Sidek, Safiah (2021) The relationship between leadership factors and successful technopreneur through the mediator role of digital enabler. Webology, 18 (SI2). pp. 344-356. ISSN 1735-188X

Al-kumaim, Nabil Hasan and Alhazmi, Abdulsalam K. and T., Ramayah and Shabbir, Muhammad Salman and Gazem, Nadhmi A (2021) Sustaining continuous engagement in value co-creation among individuals in universities using online platforms: role of knowledge self-efficacy, commitment and perceived benefits. Frontiers in Psychology, 12. pp. 1-11. ISSN 1664-1078

Alahbabi, Abdulla Mohammed Fahed Muaid and Robani, Anidah and Al-Shami, Samer Ali Hussein (2021) A framework of servant leadership impact on job performance: the mediation role of employee happiness in UAE healthcare sector. Academy of Strategic Management Journal, 20 (SI2). pp. 1-14. ISSN 1544-1458

Alamsyah, Doni Purnama and Indriana and Ratnapuri, Chyntia Ika and Aryanto, Rudy and Othman, Norfaridatul Akmaliah (2021) Digital marketing: implementation of digital advertising preference to support brand awareness. Academy of Strategic Management Journal, 20 (SI 2). pp. 1-11. ISSN 1544-1458

Alani, Sameer and Zakaria, Zahriladha and Saeidi, Tale and Ahmad, Asmala and Alsariera, Hussein and Al-Heety, Othman S. and Mahmood, Sarmad Nozad (2021) Electronic bandgap miniaturized UWB antenna for near-field microwave investigation of skin. AIP Advances, 11 (3). pp. 1-16. ISSN 2158-3226

Alghafli, Abdulla and Mohamad, Effendi and Ahmed, Al Zaidy (2021) The effect of geometric road conditions on safety performance of Abu Dhabi road intersections. Safety, 7 (4). pp. 1-10. ISSN 2313-576X

Alghafli, Abdulla and Mohamad, Effendi and Zaidy, Ahmed Al (2021) The relationship between the elapsed time from the onset of red signal until its violation and traffic accident occurrence in Abu Dhabi, UAE. Safety, 7 (3). pp. 1-11. ISSN 2313-576X

Ali, Mohd Basri and Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Zakaria, Kamarul Ariffin and Dhar Malingam, Sivakumar and Tan, Kevin Wei Chun and Ayop Azmi, Faiz Aswad (2021) Automatic sliding gate system using tap water pressure. Evergreen, 8 (2). pp. 408-413. ISSN 2189-0420

Ali, Nur Hasanah and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah and Muda, Ahmad Sobri and Sutikno, Tole and Jopri, Mohd Hatta (2021) Brain Stroke Computed Tomography Images Analysis Using Image Processing: A Review. IAES International Journal of Artificial Intelligence, 10 (4). pp. 1048-1059. ISSN 2252-8938

Alkahari, Mohd Rizal and Abdollah, Mohd Fadzli and Ramli, Faiz Redza and Rosli, Nor Ana and Maidin, Shajahan and Herawan, Safarudin Gazali (2021) Review On Effect Of Heat Input For Wire Arc Additive Manufacturing Process. Journal of Materials Research and Technology, 11. pp. 2127-2145. ISSN 2238-7854

Alkahtani, Ammar Ahmed and Qaid Al-Ammari, Ammar Mohammed and Ahmad, Mohd Riduan and Aljanad, Ahmed and Noman, Fuad and Kawasaki, Zen (2021) Cross-Correlation Wavelet-Domain-Based Particle Swarm Optimization For Lightning Mapping. Applied Sciences (Switzerland), 11 (18). 01-16. ISSN 2076-3417

Alketbi, Sareea and Akmal, Suriati and Abdul Hamid, Rahimah and Al-Shami, Samer Ali Hussein (2021) Conceptual framework: The role of cognitive absorption in delone and mclean success model in online learning in United Arab Emirates. Academy of Strategic Management Journal, 20 (SI2). pp. 1-09. ISSN 1544-1458

Almuharrmi, Sulayem Saleh Musallam Saeed and Mohamad, Norhidayah (2021) The influence of relational capital and social capital on the infrastructure project performance in UAE. Estudios de Economia Aplicada, 39 (10). pp. 1-9. ISSN 1133-3197

Alsuwaidi, Ali Khalifa Mohamed Salim and Al-Shami, Samer Ali Hussein and Akmal, Suriati (2021) The impact of entrepreneurship towards innovation in airport industry: The double mediation framework of strategic alignment and learning orientation. Academy of Strategic Management Journal, 20 (SI2). pp. 1-19. ISSN 1544-1458

Amiruddin, Hilmi and Abdollah, Mohd Fadzli and Azmi, Muhammad Alif and Mat Tahir, Noor Ayuma (2021) Lubrication Mechanisms Of Hexagonal Boron Nitride Nano-Additives Water-Based Lubricant For Steel-Steel Contact. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235 (5). pp. 1038-1046. ISSN 1350-6501

Anawar, Syarulnaziah and Ayop, Zakiah and Othman, Nur Fadzilah and Ding, Chiu Sin and Hassan, Aslinda and Mohd Ali, Nor Raihana (2021) Piracy in University: Factors associated with digital piracy among multimedia students. Journal of Theoretical and Applied Information Technology, 99 (20). pp. 4747-4758. ISSN 1992-8645

Anuar, Nurul Izah and Md Fauadi, Muhammad Hafidz Fazli (2021) A Study On Multi-Objective Particle Swarm Optimization In Solving Job-Shop Scheduling Problems. International Journal of Computer Information Systems and Industrial Management Applications, 13. pp. 51-61. ISSN 2150-7988

Anwar Apandi, Nur Ilyana and Hawari, Mohd Zarifitri Kasim (2021) Industry 4.0 With Intelligent Manufacturing 5G Mobile Robot Based On Genetic Algorithm. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (3). pp. 1376-1384. ISSN 2502-4752

Arif, Sazelin (2021) Feasibility Of Establishing Malaysian Halal Certification For Home-Based Business (HBB) Food & Beverage Scheme (Kebolehlaksanaan Mewujudkan Pensijilan Halal Malaysia Bagi Skim Perniagaan Produk Makanan & Minuman Berpusat Di Rumah). Journal Of Fiqhiyyat, 1 (1). pp. 82-96. ISSN 2805-4679

Arif, Sazelin and Abu Bakar, Nurdinah and Mat, Zawiah and Sulaiman, Nooraini and Abdullah, Nurlisa Loke (2021) Obstacles In Securing Halal Certification In Malaysia: A Study On Home-Based Business (HBB). Walailak Journal of Social Science, 14 (3). pp. 1-19. ISSN 2697-6390

Arith, Faiz and Muhammad Mustafa, Ahmad Nizamuddin and Noorasid, Nur Syamimi and Mohd Abid, Mohd Asyadi Azam and Meriam Suhaimy, Syazwan Hanani and Al-Ani, Oras A.Shareef (2021) Effect Of Low Temperature Annealing On Anatase TIO² Layer As Photoanode For Dye-Sensitized Solar Cell. Przeglad Elektrotechniczny, 97 (10). pp. 12-16. ISSN 0033-2097

Arith, Faiz and Muhammad Mustafa, Ahmad Nizamuddin and Nor, Mohd Khanapiah and Aliyaselvam, Omsri Vinasha and Al-Ani, Oras Ahmed (2021) Solution Processed Of Solid State HTL Of CuSCN Layer At Low Annealing Temperature For Emerging Solar Cell. International Journal of Renewable Energy Research, 11 (2). pp. 869-878. ISSN 1309-0127 (Submitted)

Arumugam, Nalini and Mello, Geraldine De and Md Razak, Mohamad Idham and Bakri, Mohammed Hariri (2021) The use of augmentation in the classroom: Ecopreneurer. International Journal Of Academic Research In Business And Social Sciences, 11 (10). pp. 727-741. ISSN 2222-6990

Asan, Noor Badariah and Augustine, Robin and Hassan, Emadeldeen and Perez, Mauricio David and Joseph, Laya and Berggren, Martin and Voigt, Thiemo (2021) Fat-Intrabody communication at 5.8 GHZ: Verification of dynamic body movement effects using computer simulation and experiments. IEEE Access, 9. pp. 48429-48445. ISSN 2169-3536

Azahar, Arman Hadi and Nor Shah, Mohd Badril and Zainal Abidin, Amar Faiz and Harun, Mohamad Haniff and Leong, Tian Yung and Mohd Yusof, Zakiah and Hasim, Saipol Hadi and Semail, Saifuddin (2021) E-Transform: Development Of An Electronic Educational Quiz Board For Learning High-School's Mathematical Transformation. International Journal of Engineering Trends and Technology (IJETT), 69 (5). pp. 128-132. ISSN 2231-5381

Azahar, Arman Hadi and Samsudin, Adam and Zainal Abidin, Amar Faiz and Harun, Mohamad Haniff and Azmi, Ezzatul Farhain and Karis, Mohd Safirin and Yep, Kow Wai and Mohd. Nordin, Ili Najaa Aimi (2021) Application Of Binary Firefly Algorithm (BFA) In Tuning PID Parameters For Couple Tank System. ARPN Journal Of Engineering And Applied Sciences, 16 (7). pp. 757-761. ISSN 1819-6608

Azis, Norhafiz and Mohd Selva, Amran and Shariffudin, Nor Shafiqin and Yahaya, Muhammad Sharil and Ab Kadir, Mohd Zainal Abidin and Jasni, Jasronita and Talib, Mohd Aizam (2021) Application of statistical distribution models to predict health index for condition-based management of transformers. Applied Sciences (Switzerland), 11 (6). pp. 1-20. ISSN 2076-3417

Aziz, M. F. and Mohd Abid, Mohd Asyadi Azam and Mohd Noor, Ikhwan Syafiq and Buraidah, Mohd Hamdi and Mohd Arof, Abdul Kariem (2021) Impact of diethyl carbonate in PVA based gel polymer electrolytes on dye-sensitized solar cells performance. Optical and Quantum Electronics, 53 (1). pp. 1-16. ISSN 0306-8919

Azmi, Nur Fatihah and Arith, Faiz and Mokhtar, Nur Hazwani and Norman, Mohamad Faiz (2021) Development of User-Centered Smart Child Seat for NCAP Requirements Via IoT Platform. Przeglad Elektrotechniczny, 97 (12). pp. 63-67. ISSN 0033-2097

Baharin, Kyairul Azmi and Gan, Chin Kim and Zulkifly, Zaim (2021) Improved machine learning model selection techniques for solar energy forecasting applications. International Journal of Renewable Energy Research, 11 (1). pp. 308-319. ISSN 1309-0127

Baharudin, Zikri Abadi and Bahari, Muhammad Akmal and Sutikno, Tole and Abdul Rahman, Ahmad Idil and Mat Hanafiah, Mohd Ariff and Ibrahim, Mazree (2021) An analysis of manual and autoanalysis for submicrosecond parameters in the typical first lightning return stroke. Indonesian Journal of Electrical Engineering and Computer Science, 23 (3). pp. 1451-1457. ISSN 2502-4752

Baharudin, Zikri Abadi and Mohd Isa, Nur Asyiqin and Zainuddin, Hidayat and Sutikno, Tole and Zainon, Maslan and Zulkefle, Ahmad Aizan (2021) Distribution of attempted leader with monsoon seasons and negative cloud-to-ground flashes in Melaka, Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 23 (3). pp. 1324-1330. ISSN 2502-4752

Bakri, Mohammed Hariri and Aziz, Najwa Arifah (2021) Determinants of e-wallet acceptance among consumer in Malaysia. International Journal Of Human And Technology Interaction, 5 (2). pp. 15-21. ISSN 2590-3551

Bakri, Mohammed Hariri and Dabas, Nurayati and Azman, Hartini (2021) Factor affects customer behavior during currency depreciation. Journal of Technology Management and Technopreneurship, 9 (1). pp. 48-55. ISSN 2231-7996

Bakri, Mohammed Hariri and Lim, Pei Sian and Habidin, Nurul Fadly and Abdul Aziz, Nor Azah and Masrom, Nor Ratna (2021) Determinants affecting customer perceived e-service quality towards e-retailing shopping site in Malaysia. International Journal of Business Excellence, 25 (4). pp. 491-514. ISSN 1756-0047

Bakri, Mohammed Hariri and Md Radzai, Mohammed Soleh and Mat Rasid, Ahmad Mujahid (2021) Technology acceptance in crowdfunding among retailers. Estudios de Economia Aplicada, 39 (5). pp. 1-12. ISSN 1133-3197

Bakri, Mohammed Hariri and Yap Abdullah, Muhammad Ridzwan (2021) Acceptance of public towards crowdfunding for maintenance of school property. Estudios de Economia Aplicada, 39 (4). pp. 1-14. ISSN 1133-3197

Bakri, Mohammed Hariri and Zainal, Nurazilah and Siong, Hook Law and Zaini, Syahrir and Ab Razak, Mohd Faizal (2021) Validity of fisher effect theory: Evidence from the conventional and Islamic money market in Malaysia. Quality - Access to Success, 22 (184). pp. 64-72. ISSN 1582-2559

Bohari, Zul Hasrizal and Isa, Muzamir and Abdullah, Ahmad Zaidi and Soh, Ping Jack and Sulaima, Mohamad Fani (2021) A smart partial discharge classification SOM with optimized statistical transformation feature. Bulletin of Electrical Engineering and Informatics, 10 (2). pp. 1054-1062. ISSN 2089-3191

Che Hasan, Mohd Hanif and Haris, Sharil Izwan and Ahmad, Fauzi and Hassan, Mohd Khair and Marhaban, Mohammad Hamiruce (2021) A Dynamic Model Of Electronic Wedge Brake: Experimental, Control And Optimization. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (2). pp. 740-751. ISSN 2502-4752

Cheng, Jet Yin and Ayop, Zakiah and Anawar, Syarulnaziah and Othman, Nur Fadzilah and Mohd Zainudin, Norulzahrah (2021) Slangs And Short Forms Of Malay Twitter Sentiment Analysis Using Supervised Machine Learning. International Journal of Computer Science and Network Security, 21 (11). pp. 294-300. ISSN 1738-7906

Chong, Poh Theng and Othman, Nur Fadzilah and Abdullah, Raihana Syahirah and Anawar, Syarulnaziah and Ayop, Zakiah and Ramli, Sofia Najwa (2021) Cyberbullying Detection In Twitter Using Sentiment Analysis. International Journal of Computer Science and Network Security, 21 (11). pp. 1-10. ISSN 1738-7906

Chu, Yuming and Khan, Umair and Ishak, Anuar and Zaib, Aurang and Sherif, El-Sayed M. and Waini, Iskandar and Pop, Ioan (2021) Radiative mixed convective flow induced by hybrid nanofluid over a porous vertical cylinder in a porous media with irregular heat sink/source. Case Studies in Thermal Engineering, 30. 01-14. ISSN 2214-157X

Dasman, Anisah and Mohd Kasim, Abdul Rahman and Waini, Iskandar and Khashi’ie, Najiyah Safwa (2021) Numerical solution for boundary layer flow of a dusty micropolar fluid due to a stretching sheet with constant wall temperature. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 87 (1). pp. 30-40. ISSN 2289-7879

Daud, Muhammad Zaid and Abdullah, Nurul Aida and Subet, Mary Fatimah (2021) A reflection on the negative side of crows in Malay proverbs: inquisitive semantics analysis [Refleksi sisi negatif burung gagak dalam peribahasa Melayu: analisis semantik inkuisitif]. Issues in Language Studies, 10 (2). pp. 24-44. ISSN 2180-2726

Daud, Muhammad Zaid and Subet, Mary Fatimah (2021) Narrative of Puteri Santubong and Puteri Sejinjang in local politics: pragmatic analysis [Naratif Puteri Santubong dan Puteri Sejinjang mempertalikan politik tempatan: analisis pragmatik]. Issues in Language Studies, 10 (1). pp. 110-130. ISSN 2180-2726

Daud, Siti Rohana and Mukapit, Mukhiffun and Hussin, Norhusniyati and Yahya, Wan Kalthom and Abdul Rahim, Najihah (2021) Digital Employee Experience (DEX): a preliminary study. Insight Journal, 8 (3). pp. 105-116. ISSN 2600-8564

Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan and Razali, Nadlene and Mustafa, Zaleha and Ab Ghani, Ahmad Fuad (2021) Investigation of natural fibre metal laminate as car front hood. Materials Research Express, 8 (2). pp. 1-8. ISSN 2053-1591

Dhar Malingam, Sivakumar and Ng, Lin Feng and Kamarolzaman, Anita Akmar and Hong, Tzy Yi and Ab Ghani, Ahmad Fuad (2021) Mechanical characterisation of woven kenaf fabric as reinforcement for composite materials. Journal of Natural Fibers, 18 (5). pp. 653-663. ISSN 1544-0478

Dziyauddin, Rudzidatul Akmam and Mohd Ismail, Mohd Ismifaizul and Ahmad, Robiah and Ahmad, Norulhusna and Ahmad, Noor Azurati and Abdul Hamid, Afifah Maheran (2021) A Review Of Energy Harvesting In Localization For Wireless Sensor Node Tracking. IEEE Access, 9. pp. 60108-60122. ISSN 2169-3536

Edward, Nurhasniza and Shairi, Noor Azwan and Zakaria, Zahriladha (2021) Design and mathematical analysis of reconfigurable frequency and function between feeding network and SPDT switch. International Journal of Engineering Research and Technology, 14 (2). pp. 156-163. ISSN 0974-3154

Ernawati and Kamal Baharin, Safiza Suhana and Kasmin, Fauziah (2021) Spatial-temporal analysis using two-stage clustering and GIS-based MCDM to identify potential market regions. Journal of System and Management Sciences, 11 (4). pp. 87-112. ISSN 1816-6075

Feroz, Farah Shahnaz and Salman, Ahmad Rifhan and Shahbodin, Faaizah and Ismail, Afiq Idzudden and Mat Ali, Muhammad Hairulnizam (2021) Event-Related Potentials Reveal Impaired Emotion-Cognition Interaction In Individuals With Public Speaking Anxiety. Acta Neuropsychologica, 19 (4). pp. 427-443. ISSN 1730-7503

Feroz, Farah Shahnaz and Subramaniam, Siva Kumar and Mat Ali, Muhammad Hairulnizam and Ismail, Afiq Idzudden and M. Subramaniam, Indra Devi and Salman, Ahmad Rifhan (2021) Attentional Bias During Public Speaking Anxiety Revealed Using Event-Related Potentials. Indonesian Journal of Electrical Engineering and Computer Science, 24 (1). pp. 253-259. ISSN 2502-4752

Fu, Zinvi and Bani Hashim, Ahmad Yusairi and Jamaludin, Zamberi and Mohamad, Imran Syakir (2021) The classification of EMG signals with zero retraining in the influence of user and rotation independence. International Journal Of Integrated Engineering, 13 (1). pp. 120-129. ISSN 2229-838X

Fu, Zinvi and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Mohamad, Imran Syakir (2021) Review on EMG acquisition and classification techniques: Towards zero retraining in the influence of user and arm position independence. International Journal of Integrated Engineering, 13 (4). pp. 1-15. ISSN 2229-838X

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Aoyama, Hideki and Sakundarini, Novita and Ho, Fu Haw and Herawan, Safarudin Gazali (2021) Green Product Preferences Considering Cultural Influences: A Comparison Study Between Malaysia And Indonesia. Management of Environmental Quality: An International Journal, 32 (5). pp. 1040-1063. ISSN 1477-7835

Ghazali, Ihwan and Huda, Abdullah and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Mohd Shariff, Amir Husni and Herawan, Safarudin Gazali and Ho, Fu Haw and Sakundarini, Novita (2021) Guidelines For Designing Green Products Considering Customers’ Cultural Preferences. Sustainability (Switzerland), 13 (2). pp. 1-27. ISSN 2071-1050

Ghazali, Rozaimi and Chong, Chee Soon and Chai, Mau Shern and Md. Sam, Yahaya and Has, Zulfatman (2021) Transient Analysis Of An Optimized Robust Controller In A Hydraulic System. ARPN Journal of Engineering and Applied Sciences, 16 (15). pp. 1567-1571. ISSN 1819-6608

Ghazali, Rozaimi and Ghani, Muhamad Fadli and Chai, Mau Shern and Chong, Shin Horng and Chong, Chee Soon and Md Sam, Yahaya and Has, Zulfatman (2021) The Effects Of Weightage Values With Two Objective Functions In iPSO For Electro-Hydraulic Actuator System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81 (2). pp. 98-109. ISSN 2289-7879

Hairi, Mohd Hendra and Mohd Isira, Ahmad Sadhiqin and Kamarudin, Muhammad Nizam and Packeer Mohamed, Mohamed Fauzi (2021) Investigation On Overcurrent Relay Setting And Performance Using PSCAD Software. Journal of Engineering and Technology, 12 (1). pp. 1-4. ISSN 2180-3811

Hamid, Mohd Saad and Abd Manap, Nurulfajar and Hamzah, Rostam Affendi and Kadmin, Ahmad Fauzan (2021) Stereo matching algorithm based on hybrid convolutional neural network and directional intensity difference. International Journal of Emerging Technology and Advanced Engineering, 11 (6). pp. 87-97. ISSN 2250-2459

Hamzah, Khairum and Nik Long, Nik Mohd Asri and Senu, Norazak and Eshkuvatov, Zainiddin K. (2021) Numerical solution for the thermally insulated cracks in bonded dissimilar materials using hypersingular integral equations. Applied Mathematical Modelling, 91. pp. 358-373. ISSN 0307-904X (Unpublished)

Hamzah, Rostam Affendi and Abd Gani, Shamsul Fakhar and Kadmin, Ahmad Fauzan and A Aziz, Khairul Azha and Md Roslan, Muhammad Muttaqin (2021) JPG, PNG And BMP Image Compression Using Discrete Cosine Transform. TELKOMNIKA (Telecommunication Computing Electronics And Control), 19 (3). pp. 1010-1016. ISSN 1693-6930

Hamzah, Rostam Affendi and Abd Gani, Shamsul Fakhar and Tg. Wook, Tg Mohd Faizal and Kadmin, Ahmad Fauzan and Wei, Melvin Gan Yeou and Mohamood, Nadzrie and A Aziz, Khairul Azha (2021) A Study Of Edge Preserving Filters In Image Matching. Bulletin of Electrical Engineering and Informatics, 10 (1). pp. 111-117. ISSN 2089-3191

Hanafi and Mohd Aboobaider, Burhanuddin (2021) Word Sequential Using Deep LSTM And Matrix Factorization To Handle Rating Sparse Data For E-Commerce Recommender System. Computational Intelligence and Neuroscience, 2021. pp. 1-20. ISSN 1687-5265

Haroon, Hazura and Idris@Othman, Siti Khadijah and Ramli, Muhammad Syafiq and Anbalagan, Thanigai and Hanim, Abdul Razak and Mohd Zain, Anis Suhaila (2021) Analysis Of Gallium Nitride-Based Optical Microring Resonator With Doped Polymer Grafting Material. Indonesian Journal Of Electrical Engineering And Computer Science, 24 (2). pp. 736-743. ISSN 2502-4752

Harum, Norharyati and Mas'ud, Mohd Zaki and Mat Ariff, Nor Azman and Hamid, Erman and Bahaman, Nazrulazhar (2021) Neighbor-based probabilistic rebroadcast routing protocol for reducing routing overhead in mobile ad hoc networks. International Journal of Computer Science and Network Security, 21 (12). pp. 1-8. ISSN 1738-7906

Harum, Norharyati and Md Sallehuddin Khan, Nur'aliah Izzati and Emran, Nurul Akmar and Abdullah, Noraswaliza and Zakaria, Nurul Azma and Hamid, Erman and Anawar, Syarulnaziah (2021) A development of multi-language interactive device using artificial intelligence technology for visual impairment person. International Journal of Interactive Mobile Technologies, 15 (19). pp. 79-92. ISSN 1865-7923

Harun, Mohamad Hafiz and Hudha, Khisbullah and Mohd Samin, Pakharuddin and Abu Bakar, Saiful Anuar and Abd Kadir, Zulkiffli (2021) A new approach in modelling of hitch joint of a tractor semi-trailer using virtual Pacejka tyre model. International Journal of Heavy Vehicle Systems, 28 (2). pp. 262-290. ISSN 1744-232X

Harun, Mohamad Hafiz and Hudha, Khisbullah and Mohd Samin, Pakharuddin and Abu Bakar, Saiful Anuar and Amer, Noor Hafizah and Abd Kadir, Zulkiffli (2021) A Modified Odenthal Rollover Index Algorithm For Tractor-Semitrailer Using Steering And Vehicle Speed Inputs. International Journal of Heavy Vehicle Systems, 28 (4). pp. 563-584. ISSN 1744-232X

Harun, Sulaiman Wadi and Yasin, M. and Md Johari, Md Ashadi and Johari, Siti Halma and Jali, Mohd Hafiz and Abdul Rahim, Hazli Rafis and Mohamad Ali, Ummu Umairah and Mohamed, Habibah (2021) Formaldehyde Sensor With Enhanced Performance Using Microsphere Resonator-Coupled ZnO Nanorods Coated Glass. Optics and Laser Technology, 139. pp. 1-10. ISSN 0030-3992

Hashim, Haslenda and Razak, Nurul Hanim and Yunus, Nor Alafiza (2021) Reducing Diesel Exhaust Emissions By Optimisation Of Alcohol Oxygenates Blend With Diesel/Biodiesel. Journal of Cleaner Production, 316. pp. 1-15. ISSN 0959-6526

Hashim, Hasmaini and Salam, Sazilah and Mohamad, Siti Nurul Mahfuzah and Abdullah, Mohd Mawardy and Rusdi, Jack Febrian (2021) Proposed effective learning design model on language skills using partial least squares structural equation modeling (PLS-SEM). Journal of Theoretical and Applied Information Technology, 99 (17). pp. 4284-4294. ISSN 1992-8645

Hashim, Nik Mohd Zarifie and Kawanishi, Yasutomo and Deguchi, Daisuke and Ide, Ichiro and Murase, Hiroshi and Amma, Ayako and Kobori, Norimasa (2021) Best next-viewpoint recommendation by selecting minimum pose ambiguity for category-level object pose estimation. Journal of the Japan Society for Precision Engineering, 87 (5). pp. 440-446. ISSN 0912-0289

Hashim, Norlezah and Idris, Fakrulradzi and Johari, Siti Halma and Mohd Nor, Rozilawati and Ab Wahab, Norfariza and Tuan Ab Aziz, Tuan Nur Anisa (2021) Location Tracking Using LoRa. International Journal Of Electrical And Computer Engineering (IJECE), 11 (4). pp. 3123-3128. ISSN 2088-8708

Hashim, Ummi Namirah and Salahuddin, Lizawati and Raja Ikram, Raja Rina and Hashim, Ummi Rabaah and Ngo, Hea Choon and Naim @ Mohayat, Mohd Hariz (2021) The design and implementation of mobile heart monitoring applications using wearable heart rate sensor. International Journal of Advanced Computer Science and Applications, 12 (1). pp. 168-173. ISSN 2158-107X

Hasni, Nur Aqilah Sofiyah and Md Arshad@Hashim, Syahrun Nizam and Ab Ghani, Sharin and Md Ariffen, Amizah and Wooi, Chin Leong and Romli, Muhammad Izuan Fahmi and Mousa, Mohammed Imran (2021) Effect Of Lightning Impulse Current On The Grounding System Model. Turkish Journal of Computer and Mathematics Education, 12 (8). pp. 2003-2018. ISSN 1309-4653

Hassen, Oday Ali and Abu, Nur Azman and Zainal Abidin, Zaheera and Saad, Mohamed Darwish (2021) A new descriptor for smile classification based on cascade classifier in unconstrained scenarios. Symmetry, 13 (5). pp. 1-16. ISSN 2073-8994

Hassim, Nurulhalim and Hossain, A K M Zakir and Jamil Alsayaydeh, Jamil Abedalrahim and Hasan, Mohammad Kamrul and Islam, Md. Rafiqul (2021) A Tree-Profile Shape Ultra Wide Band Antenna For Chipless RFID Tags. International Journal of Advanced Computer Science and Applications, 12 (4). pp. 546-550. ISSN 2158-107X

Helal Alkhateri, Shaikha Mohammed Ali and M.Subramaniam, Indra Devi and Jano, Zanariah and Al-Shami, Samer Ali Hussein (2021) Attitudes Towards Fake News: A Systematic Literature Review. Webology, 18 (SI). pp. 368-376. ISSN 1735-188X

Hidayat, Taufiq and Ahmad, Asmala and Desa, Mohammad Ishak (2021) Non-redundant implicational base of many-valued context using SAT. Computing and Informatics, 40 (2). pp. 368-386. ISSN 1335-9150

Ho, Fu How and Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Raja Ghazilla, Raja Ariffin and Sakundarini, Novita and Woo, Yoke Ling and Ahmad, Said and Abdul Haq, Reazul Haq (2021) What Key Drivers Are Needed To Implement Material Efficiency Strategies? An Analysis Of The Electrical And Electronic Industry In Malaysia And Its Implications To Practitioners. Sustainability (Switzerland), 13 (4). pp. 1-19. ISSN 2071-1050

Hossain, A K M Zakir and Abd Aziz, Mohamad Zoinol Abidin and Hassim, Nurulhalim and Indra, Win Adiyansyah and Wan Hassan, Wan Haszerila and Herawan, Safarudin Gazali (2021) A Planar 2×2 MIMO Antenna Array For 5G Smartphones. International Journal of Advanced Computer Science and Applications, 12 (7). pp. 710-717. ISSN 2158-107X

Hossain, A K M Zakir and Indra, Win Adiyansyah and Jamil Alsayaydeh, Jamil Abedalrahim and Herawan, Safarudin Gazali (2021) A Planar Monopole Uwb Antenna With Partial Ground Plane For Retransmission-Based Chipless RFID. International Journal of Intelligent Engineering and Systems, 14 (4). pp. 539-547. ISSN 2185-310X

Hussain Matar Mohamed Ghaith Alhosani and Ahamat, Amiruddin and Ismail, Norain (2021) Industrial Revolution 4.0 (IR 4.0) competencies: a literature review of manufacturing industry. Journal Of Legal, Ethical And Regulatory Issues, 24 (SI6). pp. 1-17. ISSN 1544-0044

Hussin, Mohamed Saiful Firdaus and Ahmad, Mohd Nazri and Jumaidin, Ridhwan and Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Muhamad Damanhuri, Amir Abdullah and Mukhtar, Mohd Fariduddin and Wahid, Mohammad Khalid and Zakaria, Azrul Abidin (2021) Effect Of Surface Roughness On Oil-Water Separation For Oil Skimmer. ARPN Journal Of Engineering And Applied Sciences, 16 (17). pp. 1742-1750. ISSN 1819-6608

Hussin, Mohamed Saiful Firdaus and Huda, Nurul and Ghazali, Ihwan and Mohd Serah, Aludin and Azlan, Khairul Azri and Abdullah, Hasan Zuhudi and Zakaria, Azrul Abidin and Idris, Maizlinda Izwana (2021) A Bibliometric Analysis Of The Global Trend Of Using Alginate, Gelatine, And Hydroxyapatite For Bone Tissue Regeneration Applications. Polymers, 13 (4). pp. 1-17. ISSN 2073-4360

Hussin, Razaidi and Jidin, Aiman Zakwan and Lee, Weng Fook and Mispan, Mohd Syafiq (2021) A Review Paper On Memory Fault Models And Test Algorithms. Bulletin Of Electrical Engineering And Informatics, 10 (6). pp. 3083-3093. ISSN 2089-3191

Ibrahim, Eihab Abdelkariem Bashir and Hashim, Ummi Rabaah and Salahuddin, Lizawati and Ismail, Nor Haslinda and Ngo, Hea Choon and Kanchymalay, Kasturi and Zabri @ Suhaimi, Siti Normi (2021) Evaluation Of Texture Feature Based On Basic Local Binary Pattern For Wood Defect Classification. International Journal of Advances in Intelligent Informatics, 7 (1). pp. 26-36. ISSN 2442-6571

Ibrahim, Haidi and Ooi, Alexander Ze Hwan and Soo, Siang Teoh and Embong, Zunaina and Abd Hamid, Aini Ismafairus and Zainon, Rafidah and Shir, Li Wang and Theam, Foo Ng and Hamzah, Rostam Affendi (2021) Interactive blood vessel segmentation from retinal fundus image based on canny edge detector. Sensors, 21 (19). pp. 1-22. ISSN 1424-8220

Ibrahim, Ismail and Md Saad, Mohd Shamsuri and Mohd Noor, Ahmad Ridzwan and Mohammad Rawi, Ali Hafizar (2021) The Perception Of Engineering And ICT Students On Group Leaders’ Ethics In Group Project Implementation: A Case In A Technical University. World Transactions on Engineering and Technology Education, 19 (2). pp. 244-248. ISSN 1446-2257

Ibrahimy, Muhammad Ibn and Hossain, A K M Zakir and S. M. A., Motakabber and Azam, S. M. K. and Islam, M. S. (2021) Multi-Resonator Application On Size Reduction For Retransmission-Based Chipless RFID Tag. Electronics Letters, 57 (1). pp. 26-29. ISSN 0013-5194

Idris, Muhammad Idzdihar and Horsfall, Alton B. (2021) 3D structures for silicon carbide transistors utilising Al2O3 as a gate dielectric. Materials Science in Semiconductor Processing, 128. 01-05. ISSN 1369-8001

Idris, Muhammad Idzdihar and Mohammed Napiah, Zul Atfyi Fauzan and Rashid, Marzaini and Zainudin, Muhammad Noorazlan Shah and Mohd Chachuli, Siti Amaniah and Mohd Abid, Mohd Asyadi 'Azam (2021) Investigation on the ohmic characteristic of Ni/Ti/4H-SiC. Bulletin of Electrical Engineering and Informatics, 10 (5). pp. 2496-2502. ISSN 2089-3191

Ifayefunmi, Olawale and Mahidan, Fairuz Mardhiah (2021) Collapse Of Conical Shells Having Single Dimple Imperfection Under Axial Compression. Journal of Pressure Vessel Technology, 143 (1). pp. 1-8. ISSN 0094-9930

Ifayefunmi, Olawale Friday and Dhar Malingam, Sivakumar and Sazali, Amir Hafiz (2021) Influence of multiple load indentation on the mechanical and material behaviour of steel cone-cylinder under axial compression. Materials Research Express, 8 (12). pp. 1-10. ISSN 2053-1591

Ishak, Anuar and Khan, Umair and Waini, Iskandar and Pop, Ioan (2021) Unsteady hybrid nanofluid flow over a radially permeable shrinking/stretching surface. Journal of Molecular Liquids, 331. pp. 1-9. ISSN 0167-7322

Ishak, Anuar and Waini, Iskandar and Alabdulhadi, Sumayyah and Ahmed, Sameh E. (2021) Hybrid Nanofluid Flow And Heat Transfer Past An Inclined Surface. Mathematics, 9 (24). pp. 1-14. ISSN 2227-7390

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Agrawal Flow Of A Hybrid Nanofluid Over A Shrinking Disk. Case Studies in Thermal Engineering, 25. pp. 1-11. ISSN 2214-157X

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Aliran titik genangan MHD dan pemindahan haba terhadap permukaan telap meregang/mengecut dalam nanobendalir hybrid. Sains Malaysiana, 50 (9). pp. 2819-2832. ISSN 0126-6039

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Flow Towards A Stagnation Region Of A Curved Surface In A Hybrid Nanofluid With Buoyancy Effects. Mathematics, 9 (18). pp. 1-13. ISSN 2227-7390

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Flow towards a stagnation region of a vertical plate in a hybrid nanofluid: assisting and opposing flows. Mathematics, 9 (4). pp. 1-16. ISSN 2227-7390

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Hybrid nanofluid flow over a permeable non-isothermal shrinking surface. Mathematics, 9 (5). pp. 1-18. ISSN 2227-7390

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Hybrid nanofluid flow with homogeneous-heterogeneous reactions. Computers, Materials and Continua, 68 (3). pp. 3255-3269. ISSN 1546-2218

Ishak, Anuar and Waini, Iskandar and Pop, Ioan (2021) Magnetohydrodynamic flow past a shrinking vertical sheet in a dusty hybrid nanofluid with thermal radiation. Applied Mathematics and Mechanics (English Edition), 43 (1). pp. 127-140. ISSN 0253-4827

Ishak, Anuar and Waini, Iskandar and Pop, Ioan Mihai (2021) Nanofluid Flow On A Shrinking Cylinder With Al2O3 Nanoparticles. Mathematics, 9 (14). pp. 1-13. ISSN 2227-7390

Ismail, Al Emran and Yaakob, Mohd Yuhazri and Salim Hamza, Sabah and Ariffin, Ahmad Hamdan and Hameed Sultan, Mohamed Thariq (2021) Hybridization Effect On Crashworthiness Parameters Of Natural Composite. Frontiers in Materials, 8. pp. 1-9. ISSN 2296-8016

Ismail, Ashari and Bakri, Mohammed Hariri (2021) Auditee satisfaction and compliance: the mediating role of perceived service quality concerning Malaysian SMEs. Journal of Contemporary Issues in Business and Government, 27 (2). pp. 2760-2777. ISSN 2204-1990

Ismail, Ashari and Bakri, Mohammed Hariri and Nordin, Mohd Norazmi (2021) Auditee satisfaction impact on compliance and corporate image concerning Malaysian SMEs. Turkish Journal of Computer and Mathematics Education, 12 (10). pp. 3436-3452. ISSN 1309-4653

Ismail, Ashari and Bakri, Mohammed Hariri and Nordin, Mohd Norazmi and Othman, Habibullah and Abdul Adis, Azaze-Azizi (2021) The mediating role of corporate image relationship between SERVQUAL and auditee satisfaction: The study of smalls and medium enterprise in Malaysia. Turkish Online Journal Of Qualitative Inquiry, 12 (4). pp. 1799-1814. ISSN 1309-6591

Ismail, Rainah and Abdollah, Mohd Fadzli and Azmi, Muhamad Syafwan (2021) Lattice Structure Design Parameters Optimization For The Structural Integrity Of Passive Vibration Isolator. Manufacturing Technology, 21 (6). pp. 736-748. ISSN 1213-2489

Ismail, Rainah and Putra, Azma and Azmi, Muhamad Syafwan and Nurdin, Muhammad Nasruddin (2021) Numerical Analysis On Static And Dynamic Behavior Of Additively Manufactured BCC Lattice Structures. Journal of Mechanical Engineering Research and Developments, 44 (5). pp. 75-86. ISSN 1024-1752

Jali, Mohd Hafiz and Abdul Rahim, Hazli Rafis and Md Johari, Md Ashadi and Mohd Yusof, Haziezol Helmi and Ahmad, Aminah and Baharom, Mohamad Faizal and Thokchom, Siddharth and Harun, Sulaiman Wadi (2021) Characteristic of non-adiabatic tapered fiber towards humidity. Przeglad Elektrotechniczny, 97 (10). pp. 49-52. ISSN 0033-2097

Jali, Mohd Hafiz and Ahmad, Aminah and Baharom, Mohamad Faizal and Abdul Rahim, Hazli Rafis and Md Johari, Md Ashadi and Mohd Yusof, Haziezol Helmi and Harun, Sulaiman Wadi (2021) Aligned vertical growth of zinc oxide nanorods on glass substrates using optimum hydrothermal synthesis technique. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (2). pp. 694-700. ISSN 2502-4752

Jali, Mohd Hafiz and Ghazali, Rozaimi and Soon, Chong Chee and Muhammad, Ahmad Razif (2021) Non-Linear Motorized Prosthetic Hand System With Gradient Descent Tuning Technique. International Journal Of Mechanical Engineering And Robotics Research, 10 (8). pp. 429-435. ISSN 2278-0149

Jali, Mohd Hafiz and Ghazali, Rozaimi and Soon, Chong Chee and Muhammad, Ahmad Razif (2021) Sliding Mode Control Design For Prosthetic Hand System. ARPN Journal Of Engineering And Applied Sciences, 16 (1). pp. 33-36. ISSN 1819-6608

Jali, Mohd Hafiz and Ibrahim, Ameelia and Ghazali, Rozaimi and Chong, Chee Soon and Muhammad, Ahmad Razif (2021) Robust Control Approach Of SISO Coupled Tank System. International Journal of Advanced Computer Science and Applications, 12 (1). pp. 188-193. ISSN 2158-107X

Jamal, Fauziyah Nur and Othman, Norfaridatul Akmaliah and Saleh, Raden Chairul and Nurhanay, Almira Husnun and Rohmah, Wafrotur (2021) Evaluating information credibility toward green marketing in Indonesia. Journal of Asian Finance, Economics and Business, 8 (2). pp. 427-438. ISSN 2288-4637

Jamaludin, Zamberi and Sudianto, Agus and Abdul Rahman, Azrul Azwan and Novianto, Sentot and Muharrom, Fajar (2021) Automatic Temperature Measurement And Monitoring System For Milling Process Of AA6041 Aluminum Aloy Using MLX90614 Infrared Thermometer Sensor With Arduino. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (2). pp. 1-14. ISSN 2289-7879

Jamil Alsayaydeh, Jamil Abedalrahim and Ahmad Idil, Abdul Rahman and Baharudin, Zikri Abadi and Wong, Adam Yoon Khang and Aziz, Azwan and Syed Salim, Syed Najib and Zainon, Maslan and Abbasi, Muhammad Inam (2021) Development Of Programmable Home Security Using GSM System For Early Prevention. ARPN Journal Of Engineering And Applied Sciences, 16 (1). pp. 88-97. ISSN 1819-6608

Jamil Alsayaydeh, Jamil Abedalrahim and Fedorchenko, Levgen and Oliinyk, Andrii and Stepanenko, Aleksandr and Netrebko, V. and Kharchenko, Anastasiia (2021) Genetic method for optimizing the process of desulfurization of flue gases from sulfur dioxide. ARPN Journal Of Engineering And Applied Sciences, 16 (24). pp. 2761-2773. ISSN 1819-6608

Jamri, Mohd Saifuzam and Kamarudin, Muhammad Nizam and Mohd Jamil, Mohd Luqman (2021) An Investigation Of Inertia Constant In Single Generator On Transient Analysis For An Isolated Electrical Network System. Indonesian Journal of Electrical Engineering and Computer Science, 23 (3). pp. 1299-1305. ISSN 2502-4760

Jamri, Mohd Saifuzam and Kamarudin, Muhammad Nizam and Mohd Jamil, Mohd Luqman (2021) Total Power Deficiency Estimation Of Isolated Power System Network Using Full-State Observer Method. Indonesian Journal of Electrical Engineering and Computer Science, 23 (3). pp. 1249-1257. ISSN 2502-4752

Jasmee, Solehah and Omar, Ghazali and Che Othaman, Siti Syahirah and Kamarolzaman, Anita Akmar and Masripan, Nor Azmmi and A. Hamid, Husna (2021) Preparation of GNPs thermally conductive adhesive at different epoxy resin/curing agent ratio and mixing method. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 159-176. ISSN 1985-5761

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Nor Shah, Mohd Badril and Sutikno, Tole and Too, Jing Wei (2021) Linear Discriminate Analysis And K-Nearest Neighbor Based Diagnostic Analytic Of Harmonic Source Identification. Bulletin of Electrical Engineering and Informatics, 10 (1). pp. 171-178. ISSN 2302-9285

Jumaidin, Ridhwan and Alamjuri, Rozeila Hanim and Kamaruddin, Zatil Hafila and Selamat, Mohd Zulkefli and Rushdan, Ahmad Ilyas (2021) Characterization of natural cellulosic fiber isolated from Malaysian cymbopogan citratus leaves. BioResources, 16 (4). pp. 7729-7750. ISSN 1930-2126

Jumaidin, Ridhwan and Alamjuri, Roziela Hanim and Ahmad Diah, Nuraliah and Rushdan, Ahmad Ilyas and Md Yusof, Fahmi Asyadi (2021) Processing and characterisation of banana leaf fibre reinforced thermoplastic cassava starch composites. Polymers, 13 (9). pp. 1-19. ISSN 2073-4360

Jumaidin, Ridhwan and Alamjuri, Roziela Hanim and Zakuan, Nur Diyana and Selamat, Mohd Zulkefli and Md Yusof, Fahmi Asyadi (2021) Extraction and characterization of natural cellulosic fiber from Pandanus Amaryllifolius leaves. Polymers, 13 (23). pp. 1-16. ISSN 2073-4360

Jumaidin, Ridhwan and Ghazali, Ihwan and Zakuan, Nur Diyana and Selamat, Mohd Zulkefli and Julmohammad, Norliza and Huda, Nurul and Ilyas, R. A. (2021) Physical Properties Of Thermoplastic Starch Derived From Natural Resources And Its Blends: A Review. Polymers, 13 (9). pp. 5-20. ISSN 2073-4360

Jumaidin, Ridhwan and Mohd Zainel, Siti Nuraisyah and Adam, Nur Wardah and Hussin, Mohamed Saiful Firdaus and Ab Ghani, Ahmad Fuad and Mohammad Taha, Mastura and Yaakob, Mohd Yuhazri and Ahmad, Mohd Nazri and Maidin, Nurul Ain and Wahid, Mohammad Khalid and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Mansor, Muhd Ridzuan and Mohamad Yatim, Nor Azlina (2021) Thermal Degradation And Mechanical Characteristics Of Sugarcane Bagasse Reinforced Biodegradable Potato Starch Composites. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (1). pp. 157-166. ISSN 2289-7879

Jumaidin, Ridhwan and Zakuan, Nur Diyana and Selamat, Mohd Zulkefli and Mohd Suan, Mohd Shahadan (2021) Thermoplastic starch/beeswax blend: characterization on thermal mechanical and moisture absorption properties. International Journal of Biological Macromolecules, 190. pp. 224-232. ISSN 0141-8130

Jumbri, Isma Addi and Roni, Noor Azura and Zainudin, Mohamad Zahir and Zaini, Muhammad Zaki (2021) Factors affecting online purchasing behaviour among generation Y in Melaka. Journal of Human Capital Development, 14 (1). pp. 111-133. ISSN 2289-8115

Junid, Ramli and Endot, Nor Azam and Siregar, Januar Parlaungan and Abd Razak, Jeefferie and Wilkinson, Arthur N. (2021) Optimization of glass transition temperature and pot life of epoxy blends using response surface methodology (RSM). Polymers, 13 (19). pp. 1-19. ISSN 2073-4360

Kadmin, Ahmad Fauzan and Hamzah, Rostam Affendi and Abd Manap, Nurulfajar and Hamid, Mohd Saad (2021) A New Pre-Processing Technique For Computational Of Stereo Matching Algorithm. Advances in Mathematics: Scientific Journal, 10 (2). pp. 743-758. ISSN 1857-8365

Kadmin, Ahmad Fauzan and Hamzah, Rostam Affendi and Abd Manap, Nurulfajar and Hamid, Mohd Saad and Abd Gani, Shamsul Fakhar (2021) Improved stereo matching algorithm based on census transform and dynamic histogram cost computation. International Journal of Emerging Technology and Advanced Engineering, 11 (8). pp. 48-57. ISSN 2250–2459

Kadmin, Ahmad Fauzan and Hamzah, Rostam Affendi and Abd Manap, Nurulfajar and Hamid, Mohd Saad and Tg. Wook, Tg Mohd Faizal (2021) Local Stereo Matching Algorithm Using Modified Dynamic Cost Computation. Indonesian Journal Of Electrical Engineering And Computer Science, 22 (3). pp. 1312-1319. ISSN 2502-4752

Kamaruddin, Rabiatul Adawiyah Azian and Mohd Ibrahim, Imran and Al-Gburi, Ahmed Jamal Abdullah and Zakaria, Zahriladha and Shairi, Noor Azwan and Abdul Rahman, Tharek and Purnamirza, Teddy (2021) Return loss improvement of radial line slot array antennas on closed ring resonator structure at 28 GHz. Przeglad Elektrotechniczny, 97 (5). pp. 65-69. ISSN 0033-2097

Kamarudin, Muhammad Nizam and Hairi, Mohd Hendra and Aboali, Maged Yahya Ali Hussein and Mohd Shah, Hairol Nizam and Mohd Aras, Mohd Shahrieel and Md. Rozali, Sahazati (2021) Braille display systems for blind people with haptic belt. International Journal of Human and Technology Interaction, 5 (1). pp. 7-16. ISSN 2600-8122

Kamarudin, Muhammad Nizam and Jamri, Mohd Saifuzam and Md Rozali, Sahazati (2021) Active Cooling Photovoltaic With IoT Facility. International Journal of Power Electronics and Drive Systems (IJPEDS), 12 (3). pp. 1494-1504. ISSN 2088-8694

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati and Mohd Shaharudin, Nabilah and Hairi, Mohd Hendra and Abd Rahman, Noor Haqkimi and Sutikno, Tole (2021) Review On Load Frequency Control For Power System Stability. TELKOMNIKA (Telecommunication Computing Electronics And Control), 19 (2). pp. 638-644. ISSN 1693-6930

Kashi'ie, Najiyah Safwa and Md Arifin, Norihan and Pop, Ioan Mihai and Nazar, Roslinda and Hafidzuddin, Ezad Hafidz (2021) A New Similarity Solution With Stability Analysis For The Three-Dimensional Boundary Layer Of Hybrid Nanofluids. International Journal of Numerical Methods for Heat and Fluid Flow, 31 (3). pp. 809-828. ISSN 0961-5539

Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Omar, Ghazali and Ganesan, Hema Nanthini and Mohd Azam, Muhamad Ammar Farhan Maula and Mohd Nawi, Mohd Al Hafiz (2021) Statistical And Simulation Analysis On Dimple Configurations Performance Of Heat Dissipation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (2). pp. 74-90. ISSN 2289-7879

Kasim, Mohd Shahir and Husshini, Nur Husnina Najeah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley (2021) Current Summary Of Surface Integrity When Machining Inconel 718 Under Different Cooling And Lubrication Strategies. Jurnal Tribologi, 29. pp. 144-155. ISSN 2289-7232

Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Husshini, Nur Husnina Najeah and Mohammad Shah All Hafiz, Mohd Shahrim and W. Mohamad, W Noor Fatihah and Ghani, Jaharah Abdul and Haron, Che Hassan (2021) Particulate Matter-Monitoring During End-Milling Under Different Cooling-Lubrication Strategies. Journal of Applied Science and Engineering, 24 (6). pp. 891-900. ISSN 2708-9967

Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Mohd Hassan, Nur Alya Syaherah and W. Mohamad, W Noor Fatihah and Mohd Shahrim, Mohammad Shah All Hafiz and Mohd Nawi, Mohd Aliff (2021) The effect of an overweight backpack towards comfortability and L5S1 among primary school student. Malaysian Journal of Ergonomics, 3 (1). pp. 1-13. ISSN 2773-501X

Kasim, Mohd Shahir and W. Mohamad, W Noor Fatihah and Raja Abdullah, Raja Izamshah and Mohamad, Noraiham and Rosnan, Hairulhisham and Sundi @ Suandi, Syahrul Azwan and Hassan, Muhammad Hafiz and Ito, Teruaki and Mat Kasa, Zamri (2021) Analysis of carbon fiber-reinforced polymer composites delamination during vibration assisted trimming using historical data design. Malaysian Journal On Composites Science And Manufacturing, 6 (1). pp. 1-13. ISSN 2716-6945

Kasmin, Fauziah and Othman, Zuraini and Syed Ahmad, Sharifah Sakinah and Munuganan, Previna and Roslan, Muhammad Naim Syahmi and Thinagaran, Paveetheran and Shafie, N.I. (2021) Designing And Developing Smart Plant Information System. International Journal of Human and Technology Interaction, 5 (2). pp. 23-31. ISSN 2590-3551

Kasni Sumeru and Hikmat, Yudi Prana and Ismail Wellid and Salma Dzakiyah AZ-zahro and Sukri, Mohamad Firdaus (2021) Relationship Between Indoor Air Quality And Sick Building Syndrome In Post Office Building In Bandung. International Journal Of Applied Technology Research, 2 (2). pp. 136-145. ISSN 2721-7582

Khamil, Khairun Nisa and Isa, Ahmad Nizam and Md Yusop, Azdiana and Mohd Sabri, Mohd Faizul (2021) Influence Of Conduction Shape Factor In Subterranean Cooling For A Thermoelectric Energy Harvesting System At Asphalt Pavement: An Experimental Investigation. Energy Sources, Part A: Recovery, Utilization, And Environmental Effects. pp. 1-18. ISSN 1556-7036

Khan, Mohammad Monirujjaman and Hossain, Junayed and Islam, Kaisarul and Ovi, Nazmus Sadat and Abbasi, Muhammad Inam and Shovon, Md. Nakib Alalm and Bourouis, Sami (2021) Design and study of an mmWave wearable textile based compact antenna for healthcare applications. International Journal of Antennas and Propagation, 2021. pp. 1-17. ISSN 1687-5869

Khashi’ie, Najiyah Safwa and M. Arifin, Norihan and Merkin, John H. and Yahaya, Rusya Iryanti and Pop, Ioan (2021) Mixed Convective Stagnation Point Flow Of A Hybrid Nanofluid Toward A Vertical Cylinder. International Journal of Numerical Methods for Heat and Fluid Flow, 31 (12). pp. 3689-3710. ISSN 0961-5539

Khashi’ie, Najiyah Safwa and M. Arifin, Norihan and Pop, Ioan Mihai and Wahid, Nur Syahirah (2021) Effect Of Suction On The Stagnation Point Flow Of Hybrid Nanofluid Toward A Permeable And Vertical Riga Plate. Heat Transfer, 50 (2). pp. 1895-1910. ISSN 2688-4534

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Pop, Ioan (2021) Magnetohydrodynamics (MHD) boundary layer flow of hybrid nanofluid over a moving plate with joule heating. Alexandria Engineering Journal, 61 (3). pp. 1938-1945. ISSN 1110-0168

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Pop, Ioan and Nazar, Roslinda (2021) Dual Solutions Of Bioconvection Hybrid Nanofluid Flow Due To Gyrotactic Microorganisms Towards A Vertical Plate. Chinese Journal of Physics, 72. pp. 461-474. ISSN 0577-9073

Khashi’ie, Najiyah Safwa and Waini, Iskandar and Mohd Zokri, Syazwani and Mohd Kasim, Abdul Rahman and Md Arifin, Norihan and Pop, Ioan Mihai (2021) Stagnation Point Flow Of A Second-Grade Hybrid Nanofluid Induced By A Riga Plate. International Journal of Numerical Methods for Heat and Fluid Flow. pp. 1-19. ISSN 0961-5539

Khashi’ie, Najiyah Safwa and Waini, Iskandar and Zainal, Nurul Amira (2021) Axisymmetric Hybrid Nanofluid Flow Due To A Convectively Heated Stretching/Shrinking Disk. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 113-124. ISSN 2289-7879

Khatib, Tamer and Bujal, Noor Ropidah and Sulaiman, Marizan and Abdul Kadir, Aida Fazliana and El Tawil, Naji Ammar Mansour (2021) A comparison between GSA and IGSA for optimal allocation and sizing of DG and impact to voltage stability margin in electrical distribution system. Journal of Electrical Engineering and Technology, 16 (6). pp. 2949-2966. ISSN 1975-0102

Khatib, Tamer T.N. and Khamis, Aziah and Muhammad, Nor Aishah and Ridzuan, Razaman (2021) A Novel Research Clustering Scheme Using Bibliometric Analysis: A Case Study Of Global Trend In Electrical Power System Load Shedding. Iranian Journal of Science and Technology - Transactions of Electrical Engineering, 45 (4). pp. 1239-1254. ISSN 2228-6179

Kok, Hoi Ern and Lau, Kok Tee (2021) DSC assessment on curing degree of micron-scaled adhesive layer in lamination-pressed flexible printed circuit panels. Journal of Mechanical Engineering, 18 (3). pp. 131-145. ISSN 1823- 5514

Latief, Hilman and Robani, Anidah and Ahamat, Amiruddin and Rozikan (2021) Becoming the state-funded madrasah or retaining autonomy: the case of two madrasahs in Kelantan. Qudus International Journal of Islamic Studies, 9 (1). pp. 1-36. ISSN 2355-1895

Latif, Kamran and Adam, Anbia and Yusof, Yusri and Abdul Kadir, Aini Zuhra (2021) A Review Of G Code, STEP, STEP-NC, And Open Architecture Control Technologies Based Embedded CNC Systems. International Journal of Advanced Manufacturing Technology, 114 (9-10). pp. 2549-2566. ISSN 0268-3768

Lau, Kwan Yiew and Rahim, Nor Hidayah and Tan, Chee Wei and Ching, Kuan Yong and Vaughan, Alun S (2021) A review of engineering dielectric properties of nanocomposites through effectively removed interfacial water. IEEE Transactions on Dielectrics and Electrical Insulation, 28 (2). pp. 448-459. ISSN 1070-9878

Liew, Pay Jun and Mohammad Zainudin, Norhazeratul and Yap, Ching Yee and Mohamad, Noraiham and Jingsi Wang (2021) Effect Of Peak Current And Pulse On Time On The Coating Layer Thickness Using Electrical Discharge Coating. Malaysian Journal on Composites Science and Manufacturing, 6 (1). pp. 14-20. ISSN 2716-6945

Liew, Pay Jun and Tay, Hock Seng and Yap, Ching Yee and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah (2021) Tribological Behaviour Of Palm Oil Mixed With Fly Ash Microparticles As A Bio-Based Lubricant For Manufacturing Processes. Jurnal Tribologi, 31. pp. 73-83. ISSN 2289-7232

Liew, Pay Jun and Yap, Ching Yee and Othman, Intan Sharhida and Abdollah, Mohd Fadzli and Yan, Jiwang (2021) Tribological Characteristics Of Electrical Discharge Coated Layers Using Quarry Dust Suspension. Surface and Coatings Technology, 428. pp. 1-9. ISSN 0257-8972

Lim, Chian Fang and Ayop, Zakiah and Anawar, Syarulnaziah and Othman, Nur Fadzilah and Harum, Norharyati and Abdullah, Raihana Syahirah (2021) URL Phishing Detection System Utilizing Catboost Machine Learning Approach. International Journal of Computer Science and Network Security, 21 (9). pp. 297-302. ISSN 1738-7906

Loh, Ser Lee and Chong, Shin Horng and Keek, Joe Siang (2021) Design And Control System Setup Of An E-Pattern Omniwheeled Cellular Conveyor. Machines, 9 (2). pp. 1-33. ISSN 2075-1702

Loh, Ser Lee and Keek, Joe Siang and Wong, Yan Chiew and Woo, Xiu Juan and Lee, Wei Wen (2021) Genetic Algorithms And Particle Swarm Optimization For Interference Minimization In Mobile Network Channel Assignment Problem. International Journal of Intelligent Engineering and Systems, 14 (4). pp. 276-288. ISSN 2185-310X

Lu, Gaopeng and Zhang, Hongbo and Qie, Xiushu and Xian, Tao and Yang, Jing and Liu, Feifan and Zhu, Baoyou and Lyu, Fanchao and Xiong, Shaolin and Yi, Qibin and Ahmad, Mohd Riduan and Li, Dongshuai and Pu, Yunjiao and Cummer, Steven A. and Briggs, Michael S. (2021) On the terrestrial gamma-ray flashes preceding narrow bipolar events. Geophysical Research Letters, 48 (8). pp. 1-12. ISSN 0094-8276

Machmudah, Affiani and Parman, Setyamartana and Abbasi, Aijaz and Solihin, Mahmud Iwan and Abd Manan, Teh Sabariah and Beddu, Salmia and Ahmad, Amiruddin and Wan Rasdi, Nadiah (2021) Cyclic Path Planning Of Hyper-Redundant Manipulator Using Whale Optimization Algorithm. International Journal Of Advanced Computer Science And Applications, 12 (8). pp. 677-686. ISSN 2156-5570

Mansor, Muhd Ridzuan and Omar, Ghazali and Tamaldin, Noreffendy and Abdul Hamid, Nurfaizey and Md. Saad, Adzni and Arshad, M. A. and Akop, Mohd Zaid and Salim, Mohd Azli and Masripan, Nor Azmmi and Majid, M. H.A. and Maamor, M. A. H. M. and Herawan, S. G. and Solah, M. S. (2021) Implementation Of Dark And Raining Environmental Conditions To Investigate Lane Support System Performance For Passenger Cars In Southeast Asia: Case Study For Malaysian Domestic Road. International Review of Mechanical Engineering, 15 (1). pp. 51-58. ISSN 1970-8734 (In Press)

Masripan, Nor Azmmi and Salim, Mohd Azli and Lin, Soong Jin and Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Abdul Hamid, Nurfaizey and Wasbari, Faizil and Noordin, Aminurrashid (2021) Effect Of Stretchable Conductive Ink (SCI) On Electrical Conductivity Under Tensile Stress. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 429-437. ISSN 1985-5761

Mat Lazi, Jurifa and Nordin, Mohamad Ikhwan and Talib, Md Hairul Nizam and Ibrahim, Zulkifilie (2021) Speed sensorless control for PMSM drives using Extended Kalman Filter. Jurnal Teknologi, 84 (1). pp. 77-83. ISSN 2180–3722

Mat Tokit, Ernie and Ng, Angie and Mohd Saat, Fatimah Al Zahrah and Abd Rahman, Norasra and Shikh Anuar, Fadhilah and M. Mitan, Nona Merry (2021) A Preliminary Conceptual Design Approach Of Food Waste Composter Design. Evergreen, 8 (2). pp. 397-407. ISSN 2189-0420

Md Ali, Afifah and Omar, Mohd Zaidi and Hashim, Hanizam and Salleh, Mohd Shukor and Mohamed, Intan Fadhlina (2021) Recent development in graphene-reinforced aluminium matrix composite: a review. Reviews on Advanced Materials Science, 60. pp. 801-817. ISSN 1606-5131

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Wan Muhammad, ‪Wan Nur Azrina and Abu Bakar, Mohd Hadzley and Wakhi Anuar, Nur Farah Bazilah (2021) Fill Time Optimization Analysis In Flow Simulation Of Injection Molding Using Response Surface Method. Malaysian Journal on Composites Science and Manufacturing, 4 (1). pp. 28-39. ISSN 2716-6945

Md Arifin, Norihan and Bachok, Norfifah and Abu Bakar, Shahirah and Khashi’ie, Najiyah Safwa (2021) Hybrid nanofluid flow over a permeable shrinking sheet embedded in a porous medium with radiation and slip impacts. Mathematics, 9 (8). pp. 1-14. ISSN 2227-7390

Md Arifin, Norihan and Bachok, Norfifah and Wahid, Nur Syahirah and Khashi’ie, Najiyah Safwa and Pop, Ioan Mihai and Hafidzuddin, Mohd Ezad Hafidz (2021) Flow and heat transfer of hybrid nanofluid induced by an exponentially stretching/shrinking curved surface. Case Studies in Thermal Engineering, 25. 01-11. ISSN 2214-157X

Md Arifin, Norihan and Khashi’ie, Najiyah Safwa and Sheremet, Mikhail and Pop, Loan Mihai (2021) Shape Factor Effect Of Radiative CU–AL²O³/H²O Hybrid Nanofluid Flow Towards An EMHD Plate. Case Studies in Thermal Engineering, 26. pp. 1-12. ISSN 2214-157X

Md Arifin, Norihan and Khashi’ie, Najiyah Safwa and Wahid, Nur Syahirah and Yahaya, Rusya Iryanti and Pop, Ioan Mihai and Bachok, Norfifah and Hafidzuddin, Mohd Ezad Hafidz (2021) Three-dimensional radiative flow of hybrid nanofluid past a shrinking plate with suction. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 85 (1). pp. 54-70. ISSN 2289-7879

Md Arifin, Norihan and Wahid, Nur Syahirah and Pop, Ioan Mihai and Khashi’ie, Najiyah Safwa (2021) Hybrid Nanofluid Slip Flow Over An Exponentially Stretching/Shrinking Permeable Sheet With Heat Generation. Mathematics, 9 (1). pp. 1-20. ISSN 2227-7390

Md Basar, Mohd Farriz and Mohd Noh, Mohd Syahrin Amri and Yaakub, Muhamad Faizal and Amir Mohamed, Kamarul and Sam, Mustafa (2021) An Integrated Cooling Tunnel For Preventing The Breakage Of Chocolate Snack Bars. International Journal of Engineering Trends and Technology, 69 (9). pp. 66-72. ISSN 2349-0918

Md Fauadi, Muhammad Hafidz Fazli and Ramlan, Samad and Razali, N.H. and Hao, X. (2021) Agent-based chemical mechanical planarization qualification for semiconductor wafer fabrication. Journal of Advanced Manufacturing Technology, 15 (3). pp. 41-53. ISSN 1985-3157

Md Ghazaly, Mariam and Mohd Basar, Siti Norazlin and Lagani, Muhammad Shadiq (2021) Design Optimization & Analysis Of A Soft Crawling Robot. International Journal of Integrated Engineering, 13 (6). pp. 285-298. ISSN 2229-838X

Md Ghazaly, Mariam and Yusri, Izzati and Lagani, Muhammad Shadiq (2021) Motion Characterization Of A Switched Reluctance Actuator – A Signal Driven Approach. Jurnal Teknologi, 83 (5). pp. 75-84. ISSN 2180-3722

Md Johari, Md Ashadi and Jali, Mohd Hafiz and Mohd Yusof, Haziezol Helmi and Abdul Rahim, Hazli Rafis and Ahmad, Aminah and Abdul Khudus, Muhammad Imran Mustafa and Harun, Sulaiman Wadi (2021) Sodium Hypochlorite Sensing By Different Size Of Optical Micro-Bottle Resonators. Optoelectronics and Advanced Materials, Rapid Communications, 15 (9-10). pp. 427-432. ISSN 1842-6573

Md Johari, Md Ashadi and Jali, Mohd Hafiz and Mohd Yusof, Haziezol Helmi and Ahmad, Aminah and Abdul Rahim, Hazli Rafis and Sharif, Maslinda Mat and Harun, Sulaiman Wadi and Abdul Khudus, Muhammad Imran Mustafa (2021) Effect Of Polyvinyl Alcohol Coating Microbottle Resonator For Sodium Hypochlorite Concentration Sensing. Optik, 242. pp. 1-8. ISSN 0030-4026

Md Nasir, Nur Syuhada and Ab Wahab, Norfariza and Sofian, Badri and Raja Abdullah, Raja Izamshah and Sasahara, Hiroyuki (2021) Experimental Investigations Towards Hole Accuracy In Micro-Drilling Of Carbon Fibre Reinforced Polymer Material. Manufacturing Technology, 21 (3). pp. 381-386. ISSN 1213-2489

Md Saat, Mohd Shakir and Hasan, Khairul Kamarudin and Yusop, Yusmarnita and Husin, Siti Huzaimah and Md Sin, Nor Diyana (2021) The Design Of An Efficient Class E-LCCL Capacitive Power Transfer System Through Frequency Tuning Method. International Journal of Electrical and Computer Engineering, 11 (2). pp. 1095-1104. ISSN 2088-8708

MdArifn, Norihan and Khashi’ie, Najiyah Safwa and Waini, Iskandar and Pop, Ioan (2021) Unsteady Squeezing Flow Of Cu-Al2O3/Water Hybrid Nanofluid In A Horizontal Channel With Magnetic Field. Scientific Reports, 11 (1). pp. 1-11. ISSN 2045-2322

Meor Said, Maizatul Alice and Syed Jaya, Syed Mohd Iqwan Naqiuddin and Zakaria, Zahriladha and Misran, Mohamad Harris and Ismail, Mohd Muzafar (2021) Design of a dual-band antenna for energy harvesting application. Bulletin of Electrical Engineering and Informatics, 10 (6). pp. 3265-3273. ISSN 2302-9285

Misha, Suhaimi and Mohd Rosli, Mohd Afzanizam and Yusof, Ahmad Anas and Ramli, Muhammad Safwan Asyraf and Haminudin, Nor Faizah and Md Basar, Mohd Farriz and Sopian, Kamaruzzaman and Ibrahim, Adnan and Abdullah, Ahmad Fazlizan (2021) Review Of Desiccant In The Drying And Air-Conditioning Application. International Journal of Heat and Technology, 39 (5). pp. 1475-1482. ISSN 0392-8764

Mispan, Mohd Syafiq and Hafez, Sarkawi and Jidin, Aiman Zakwan and Mohd Nasir, Haslinah (2021) Performance Evaluation of SRAM-PUF based on 7-nm, 10-nm and 14-nm FinFET Technology Nodes. International Journal of Nanoelectronics and Materials, 14 (4). pp. 345-356. ISSN 1985-5761

Mispan, Mohd Syafiq and Halak, Basel and Zwolinski, Mark (2021) A Survey On The Susceptibility Of PUFs To Invasive, Semi-Invasive And Noninvasive Attacks Challenges And Opportunities For Future Directions. Journal of Circuits, Systems and Computers, 30 (11). pp. 1-37. ISSN 0218-1266

Mispan, Mohd Syafiq and Jidin, Aiman Zakwan and Mohd Nasir, Haslinah and Hafez, Sarkawi and Ramlee, Radi Husin (2021) Design And Implementation Of Multiplexed And Obfuscated Physical Unclonable Function. Indonesian Journal Of Electrical Engineering And Informatics (IJEEI), 9 (1). pp. 91-100. ISSN 2089-3272

Mispan, Mohd Syafiq and Kamaruddin, Muhammad Raihaan and Jidin, Aiman Zakwan and Mohd Nasir, Haslinah (2021) Proof Of Concept For Lightweight PUF-Based Authentication Protocol Using NodeMCU ESP8266. Indonesian Journal Of Electrical Engineering And Computer Science, 24 (3). pp. 1392-1398. ISSN 2502-4752

Mo, Kim Hung and Othman, Muhammad Nur and Putra, Azma and Leong, Geok Wen and Chin, Tze Ming and Ibrahim, Zainah (2021) Incorporation Of Crumb Rubber And Air-Entraining Agent In Ultra-Lightweight Cementitious Composite: Evaluation Of Mechanical And Acoustic Properties. Journal of Building Engineering, 42. pp. 1-7. ISSN 2352-7102

Mo, Kim Hung and Othman, Muhammad Nur and Putra, Azma and Shah, Syed Nasir and Yap, Soon Poh (2021) Assessment Of Lightweight Recycled Crumb Rubber-Cement Composite Produced By Preplaced Method. Advances in Concrete Construction, 11 (5). pp. 409-417. ISSN 2287-5301

Mohamad, Effendi and Abd Rahman, Mohd Soufhwee and Abdul Rahman, Azrul Azwan (2021) Development Of IoT - Enabled Data Analytics Enhance Decision Support System For Lean Manufacturing Process Improvement. Concurrent Engineering Research and Applications, 29 (3). pp. 208-220. ISSN 1063-293X

Mohamad, Effendi and Faishal, Muhammad and Adiyanto, Okka and Abdul Rahman, Azrul Azwan and Jamli, Mohamad Ridzuan and Desviane, Shabilla and Ramawan, Alfian (2021) Safety and quality improvement of street food packaging design using quality function deployment. International Journal of Integrated Engineering, 13 (1). pp. 19-28. ISSN 2229-838X

Mohamad, Effendi and Faishal, Muhammad and Adiyanto, Okka and Jaafar, Roshidah and Abdul Rahman, Azrul Azwan and Jatmiko, Hapsoro Agung and Novera, Ijmal (2021) Integrated approach to customer requirement using quality function deployment and Kansei engineering to improve packaging design. Asia-Pacific Journal of Science and Technology, 26 (2). pp. 1-10. ISSN 2539-6293

Mohamad, Effendi and Okka Adiyanto and Muhammad Faishal and Jaafar, Roshidah and Mohamad, Nor Akramin and Abd Razak, Jeefferie and Mulaicin, Mutia (2021) Integrated self-report and observational risk assessment for work-related musculoskeletal disorder in small and medium enterprises. Engineering and Applied Science Research, 49 (1). pp. 73-80. ISSN 2539-6161

Mohamad, Noraiham and Abd Latiff, Anisah and Liew, Pay Jun and Kasim, Mohd Shahir and Abd Razak, Jeefferie and Ab Maulod, Hairul Effendy and Qumrul Ahsan (2021) Morphological Characteristics And Wear Mechanism Of Recycled Carbon Fibre Prepreg Reinforced Polypropylene Composites. Malaysian Journal on CompositesScience and Manufacturing, 5 (1). pp. 1-10. ISSN 2716-6945

Mohamad, Norhidayah and Othman, Azrina and Rajah, Neerosha and Ying, Tan Siew and Samsudin, Norsamsinar (2021) The Relationship Between Massive Online Open Courses (MOOCs) Content Design And Students' Performance. International Journal Of Interactive Mobile Technologies, 15 (4). pp. 4-15. ISSN 1865-7923

Mohamad Ismail, Mohamad Razif and Chee, Kiang Lam and Rahiman, Mohd Hafiz Fazalul and Sundaraj, Kenneth (2021) Fatigue Effect On Cross-Talk In Mechanomyography Signals Of Extensor And Flexor Forearm Muscles During Maximal Voluntary Isometric Contractions. Journal of Musculoskeletal Neuronal Interactions, 21 (4). pp. 481-494. ISSN 1108-7161

Mohamad Noor, Mohd Yusri and Tengku Sharif, Tengku Intan Suzila and Omar, Siti Rohana and Ahmat, Norun Najjah and Hassan, M. (2021) Investigating The Compliance Of Ethnic Relations MOOC To Gagné Nine Events Of Instruction. GADING (Online) Journal for Social Sciences, 24 (4). pp. 1-9. ISSN 2600-7568

Mohamed, Zaharuddin and Jaafar, Hazriq Izzuan and Ahmad, Mohd Ashraf and Abdul Wahab, Norhaliza and Ramli, Liyana and Shaheed, Mohammad Hasan (2021) Control Of An Underactuated Double-Pendulum Overhead Crane Using Improved Model Reference Command Shaping: Design, Simulation And Experiment. Mechanical Systems And Signal Processing, 151. pp. 1-18. ISSN 0888-3270

Mohamed Yunus, Mawarni and Samin, Nurazriana and Din, Jafri and Jong, Siat Ling (2021) Evaluation of time diversity technique for satellite mitigation in tropical climate. Indonesian Journal Of Electrical Engineering And Informatics (IJEEI), 9 (2). pp. 538-546. ISSN 2089-3272

Mohammed, Norazlin and Ong, Hui Jie and Lua, Cheong Feng (2021) An Augmented Reality-Based Solution For Visualization Of Crystal Model And Composition To Improve Students’ Learning. Journal Of Advanced Computing Technology And Application (JACTA), 3 (2). pp. 26-33. ISSN 2672-7188

Mohammed Ibrahim, Ayman and Mohd Ibrahim, Imran and Shairi, Noor Azwan (2021) Review Isolation Techniques Of The MIMO Antennas For Sub-6. Przeglad Elektrotechniczny, 97 (1). pp. 1-7. ISSN 0033-2097

Mohan, Sanjay and Abdollah, Mohd Fadzli bin and Ul Haq, Mir Irfan and Raina, Ankush (2021) Potential Of AA7075 As A Tribological Material For Industrial Applications - A Review. Indian Journal of Pure and Applied Physics, 59 (3). pp. 197-201. ISSN 0019-5596

Mohd Ab Halim, Mohd Firdaus and Ab Rahman, Azhan and Sulaiman, Erwan and Aziz, Roziah and Othman, Syed Muhammad Naufal and Naufal, Syed Muhammad and Kosaka, Takashi (2021) Electromagnetic torque performance evaluation of concentric magnetic gear alternative conditions using finite element. International Journal of Nanoelectronics and Materials, 14. pp. 59-68. ISSN 1985-5761

Mohd Ab Halim, Mohd Firdaus and Raja Othman, Raja Nor Firdaus Kashfi and Sulaiman, Erwan (2021) Gear efficiency estimation method through finite element and curve fitting. International Journal of Applied Electromagnetics and Mechanics, 66 (3). pp. 425-443. ISSN 1383-5416

Mohd Ab Halim, Mohd Firdaus and Sulaiman, Erwan (2021) Permanent magnet flux switching torque performance indicator. El-Cezeri Journal of Science and Engineering, 8 (2). pp. 582-591. ISSN 2148-3736

Mohd Abid, Mohd Asyadi 'Azam and Nik Ramli, Nik Suhaini and Tuan Nawi, Tuan Idzuddin and Mohd Nor, Nurul Aini Nadirah (2021) Recent Advances In Biomass-Derived Carbon, Mesoporous Materials, And Transition Metal Nitrides As New Electrode Materials For Supercapacitor: A Short Review. International Journal of Energy Research, 45 (6). pp. 8335-8346. ISSN 0363-907X

Mohd Abid, Mohd Asyadi 'Azam and Safie, Nur Ezyanie and Abdul Aziz, Mohd Fareezuan and Ismail, Mashasriyah (2021) Recent Progress Of Graphene-Based Materials For Efficient Charge Transfer And Device Performance Stability In Perovskite Solar Cells. International Journal of Energy Research, 45 (2). pp. 1347-1374. ISSN 0363-907X

Mohd Abid, Mohd Asyadi 'Azam and Safie, Nur Ezyanie and Hamdan, Hazwan Hasif (2021) Effect of sulfur content in the crude oil to the corrosion behavior of internal sur-face of API 5L X65 petroleum pipeline steel. Manufacturing Technology, 21 (5). pp. 561-574. ISSN 1213-2489

Mohd Abid, Mohd Asyadi Azam and Abdul Aziz, Mohd Fareezuan and Buraidah, Mohd Hamdi and Mohd Arof, Abdul Kariem (2021) Effect of the potassium iodide in tetrapropyl ammonium iodide-polyvinyl alcohol based gel polymer electrolyte for dye-sensitized solar cells. Optik, 247. pp. 1-9. ISSN 0030-4026

Mohd Abid, Mohd Asyadi Azam and Abdul Aziz, Mohd Fareezuan and Safie, Nur Ezyanie and Raja Seman, Raja Noor Amalina and Abdul Latiff, Anas and Suhaili, Muhamad Rafi and Arith, Faiz and Anuar, Mohamed Kassim and Ani, Mohd Hanafi (2021) Structural Characterization And Electrochemical Performance Of Nitrogen Doped Graphene Supercapacitor Electrode Fabricated By Hydrothermal Method. International Journal of Nanoelectronics and Materials, 14 (2). pp. 127-136. ISSN 1985-5761

Mohd Abid, Mohd Asyadi Azam and Ahmad, Aina Syuhada and Yuza, Nor Aqilah and Zulkifli, Nor Syazana Adilah and Safie, Nur Ezyanie (2021) Recent Advances Of Silicon, Carbon Composites And Tin Oxide As New Anode Materials For Lithium-Ion Battery: A Comprehensive Review. Journal of Energy Storage, 33. pp. 1-13. ISSN 2352-152X

Mohd Chachuli, Siti Amaniah and Hamidon, Mohd Nizar and Ertugrul, Mehmet and Mamat, Md Shuhazlly and Coban, Omer and Tuzluca, Fatma Nur and Yesilbag, Yasar Ozkan and Shamsudin, Nur Hazahsha (2021) Effects of MWCNTs/graphene nanoflakes/MXene addition to TiO2 thick film on hydrogen gas sensing. Journal Of Alloys And Compounds, 882 (160671). pp. 1-13. ISSN 0925-8388

Mohd Daud, Mohd Ahadlin and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli and Dhar Malingam, Sivakumar and Ab Ghani, Ahmad Fuad and Thirukumaran, Manoharan (2021) The effect of pineapple leaf fiber as a filler in polymer matrix composite for interior part in automotive. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 363-372. ISSN 1985-5761

Mohd Hanafi, Mohd Hafidzal and Ab Razak, Nurul Afwanisa` and Razak, Nurul Hanim and Ibrahim, Asriana and Omar, Anis Ainaa (2021) The effective polycyclic aromatic hydrocarbons removal from waste cooking oils: the best evidence review. Chemical Engineering Transactions, 89. pp. 475-480. ISSN 2283-9216

Mohd Ibrahim, Imran and Al Gburi, Ahmed Jamal Abdullah and Zakaria, Zahriladha and Muhannad Kaml Abdulhameed and Saeidi, Tale (2021) Enhancing Gain For UWB Antennas Using FSS: A Systematic Review. Mathematics, 9 (24). pp. 1-16. ISSN 2227-7390

Mohd Isira, Ahmad Sadhiqin and Md Yusop, Azdiana and Hairi, Mohd Hendra and Abdul Mutalip, Zaiton and Sheikh Hanis, Siti Nurfarihah and Wong, Chunyan and Casuat, Cherry D. (2021) State Feedback Containment Control Of Multi-Agents System With Lipschitz Nonlinearity. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (3). pp. 1398-1409. ISSN 2502-4752

Mohd Najib, Suhaila and Ab Wahab, Norfariza and Hassan, Muhammad Zahir and M.A. Che Roselam and M. H. Johari and A. H. Ariffin (2021) The Impact Of Glare During Daylight on Driving Performance: An Experimental Setup. Journal of The Society of Automotive Engineers Malaysia, 5 (1). pp. 22-27. ISSN 2550-2239

Mohd Nasir, Haslinah and Brahin, Noor Mohd Ariff and Mohamed Aminuddin, Mai Mariam and Mispan, Mohd Syafiq and Zulkifli, Mohd Faizal (2021) Android based application for visually impaired using deep learning approach. IAES International Journal of Artificial Intelligence, 10 (4). pp. 879-888. ISSN 2089-4872

Mohd Nasir, Haslinah and Mohamed Aminuddin, Mai Mariam and Brahin, Noor Mohd Ariff and Mispan, Mohd Syafiq (2021) Hybrid mean fuzzy approach for attention detection. International Journal Of Online And Biomedical Engineering, 17 (6). pp. 58-72. ISSN 2626-8493

Mohd Rafee, Nur Safura and Mohammed, Norazlin (2021) A Case Study On Augmented Reality Applications For Chemistry Subject Using Heuristic Evaluation. Journal Of Advanced Computing Technology And Application, 3 (2). pp. 34-41. ISSN 2672-7188

Mohd Rosli, Mohd Afzanizam and Nawam, Muhammad Zaid and Suhaimi, Misha and Roslizar, Aiman and Abdul Hamid, Nurfaizey and Loon, Yew Wai and Hussain, Faridah and Herawan, Safarudin Gazali and Arifin, Zainal (2021) Validation Study Of Photovoltaic Thermal Nanofluid Based Coolant Using Computational Fluid Dynamics Approach. CFD Letters, 13 (3). pp. 58-71. ISSN 2180-1363

Mohd Rosli, Mohd Afzanizam and Saadun, Mohd Noor Asril and Latif, Irfan Alias Farhan and Nawam, Muhammad Zaid and Jarimi, Hasila and Sharif, Mohd Khairul Anuar and Ali, Sulaiman (2021) A Simulation Study On Temperature Uniformity Of Photovoltaic Thermal Using Computational Fluid Dynamics. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 21-38. ISSN 2289-7879

Mohd Saad, Norhashimah and Abdullah, Abdul Rahim and Wan Hassan, Wan Haszerila and Abdul Rahman, Nor Nabilah Syazana and Ali, Nur Hasanah and Abdullah, I. N. (2021) Automated Vision Based Defect Detection Using Gray Level Co-Occurrence Matrix For Beverage Manufacturing Industry. IAES International Journal of Artificial Intelligence, 10 (4). pp. 818-829. ISSN 2252-8938

Mohd Saad, Norhashimah and Mohd Noor, Nor Shahirah and Abdullah, Abdul Rahim (2021) A Review On Image Segmentation Techniques For MRI Brain Stroke Lesion. Journal of Telecommunication, Electronic and Computer Engineering, 13 (4). pp. 27-34. ISSN 2180–1843

Mohd Saad, Norhashimah and Omar, Siti Nashayu and Abdullah, Abdul Rahim and Shair, Ezreen Farina and Tengku Zawawi, Tengku Nor Shuhada (2021) Application Of Digital Signal Processing And Machine Learning For Electromyography: A Review. Asian Journal of Medical Technology, 1 (1). pp. 30-45. ISSN 2682-9177

Mohd Saad, Wira Hidayat and Ahmad Radzi, Syafeeza and Zainudin, Muhammad Noorazlan Shah and Mohamad Shokri, Ahmad Sayuthi and A. Razak, S.J. (2021) Development on sleep monitoring system configuration toward an optimal ambient condition setting of the sleep quality. Asian Journal of Medical Technology, 1 (1). pp. 60-72. ISSN 2682-9177

Mohd Saat, Fatimah Al Zahrah and Almukhtar Allafi, Waleed and Mao, Xiaoan (2021) Fluid Dynamics Of Oscillatory Flow Across Parallel-Plates In Standing-Wave Thermoacoustic System With Two Different Operation Frequencies. Engineering Science And Technology, An International Journal, 24 (1). pp. 41-49. ISSN 2215-0986

Mohd Saat, Fatimah Al Zahrah and Hasbullah, Nurjannah and Shikh Anuar, Fadhilah and Sukri, Mohamad Firdaus and Johari, Dahlia (2021) Temperature And Velocity Changes Across Tube Banks In One-Directional And Bi-Directional Flow Conditions. Evergreen, 8 (2). pp. 428-437. ISSN 2189-0420

Mohd Saat, Fatimah Al Zahrah and Hew, Wei Ren and Shikh Anuar, Fadhilah and Mat Tokit, Ernie and Abdul Wahap, Mohd Arizam and Tee, Boon Tuan (2021) Computational Fluid Dynamics Study Of Wake Recovery For Flow Across Hydrokinetic Turbine At Different Depth Of Water. CFD Letters, 13 (2). pp. 62-76. ISSN 2180-1363

Mohd Saat, Fatimah Al Zahrah and Sukri, Mohamad Firdaus and Shikh Anuar, Fadhilah and Akop, Mohd Zaid and Lin, Chou Aw and Abdul Manan, Zainuddin (2021) Heat Transfer Across Tube Banks With A Passive Control Vortex Generator In Steady One-Directional And Oscillatory Flows. CFD Letters, 13 (1). pp. 1-18. ISSN 2180-1363

Mohd Sabri, Mohd Faizul and Sabran, Nuur Syahidah and Fadzallah, Iman Aris and Ono, Takahito and Samat, Khairul Fadzli and Yusuf, Siti Nor Farhana and Saidur, Rahman (2021) Enhanced Thermoelectric Properties Of Skutterudite Thick Film Polyvinyl Alcohol Assisted From The Post-Deposition Annealing Effect. Journal of The Electrochemical Society, 168 (7). pp. 1-10. ISSN 0013-4651

Mohd Shaari Azyze, Nur Latif Azyze and Md Isa, Ida Syafiza and Kamaruzaman, Nur Syahirah (2021) Development Of Real-Time Lora-Based Air Pollution Monitoring System. ARPN Journal Of Engineering And Applied Sciences, 16 (19). pp. 1984-1990. ISSN 1819-6608

Mohd Yusoff, Zakiah and Rifin, Rozi and Hassan, Khairul Kamaruddin and Zainal Abidin, Amar Faiz and Kadiran, Kamaru Adzha and Azahar, Arman Hadi and Ahmad Zaghlul, Fitrah Nur Hidayah and Harun, Mohamad Haniff and Hassan, Ahmad Fariz (2021) Looping Board: Development Of An Electronic Educational Quiz Board That Test Student Knowledge On Laplace Transform For Electrical Circuit Modelling. International Journal of Engineering Trends and Technology, 69 (3). pp. 64-68. ISSN 2231 – 5381

Mohd Zabidi, Muhammad Izzat Zakwan and Zainal Abidin, Amar Faiz and Harun, Mohamad Haniff and Azahar, Arman Hadi and Idrus, Muhammad Hazwan and Tengku Wook, Tg Mohd Faisal and Mohd Said, Rahaini and Hasim, Nur Aiman Hanis (2021) Development Of An Interactive Plant Monitoring Device By Using Arduino Microcontroller. ARPN Journal of Engineering and Applied Sciences, 16 (4). pp. 459-467. ISSN 1819-6608

Mohd-Ghazali, Normah and Mohd Sa'at, Fatimah Al-Zahrah and Roslan, Muhammad Nazmi Hadi and Zolpakar, Nor Atiqah (2021) Analysis Of 3D Printed Stack In Thermoacoustic Cooling. Evergreen, 8 (1). pp. 131-137. ISSN 2189-0420

Mohmad Hassim, Yana Mazwin and Abu Sari, Mohd Yazid and Hidayat, Rahmat and Ahmad, Asmala (2021) Monitoring Rice Crop And Paddy Field Condition Using UAV RGB Imagery. International Journal on Informatics Visualization, 5 (4). pp. 469-474. ISSN 2549-9904

Monazzam, Mohammadreza and Putra, Azma and Abdi, Debelo Dugasa and Taban, Ebrahim and Golbabaei, Farideh and Khadem, Monireh (2021) Sound Absorption Performance Of Natural Fiber Composite From Chrome Shave And Coffee Silver Skin. Applied Acoustics, 182. pp. 1-10. ISSN 0003-682X

Mouazen, Abdul M. and Mohamed Kassim, Anuar and Nawar, Said (2021) Potential Of On-The-Go Gamma-Ray Spectrometry For Estimation And Management Of Soil Potassium Site Specifically. Sustainability (Switzerland), 13 (2). pp. 1-17. ISSN 2071-1050

Mousa, Ali Hasan and Othman, Mohd Azlishah and Abd Aziz, Mohamad Zoinol Abidin and Mohammed Ibrahim, Ayman (2021) Sierpinski Mimo Antenna For 5G Applications. Przeglad Elektrotechniczny, 97 (7). pp. 126-131. ISSN 0033-2097

Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan and Hariri, Azian and Ab Ghani, Sharin and Herawan, Safarudin Ghazali and Paiman, Nuur Azreeb (2021) The Effects Of Virgin And Recycled PA12 Powders In SLS Processes On Occupational Exposures. International Journal of Environmental Science and Development, 12 (11). pp. 339-345. ISSN 2010-0264

Muhammad, Nor Aishah and Anwar Apandi, Nur Ilyana and Seman, Norhudah and Yonghui, Li (2021) Energy Harvesting In Sub-6 GHz And Millimeter Wave Hybrid Networks. IEEE Transactions On Vehicular Technology, 70 (5). pp. 4471-4484. ISSN 0018-9545 (Unpublished)

Muhammad Mustafa, Ahmad Nizamuddin and A Subki, A Shamsul Rahimi and Ing, Jia Rong and Saat, Shahrizal and Arith, Faiz and Zainal Abidin, Muhammad Zaimi (2021) Investigation Of Copper(I)Thiocyanate (CuSCN) As A Hole Transporting Layer For Perovskite Solar Cells Application. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 78 (2). pp. 153-159. ISSN 2289-7879

Mukhtar, Mohd Fariduddin and Hasim, Nur Aiman Hanis and Rosley, Mohd Idain Fahmy and Hussin, Mohamed Saiful Firdaus and Muhamad Damanhuri, Amir Abdullah and Samsudin, Adam (2021) Development Of A Portable Ablution System For Muslims From Ergonomics Approach. ARPN Journal of Engineering and Applied Sciences, 16 (1). pp. 51-56. ISSN 1819-6608

Musa, Haslinda and Azmi, Fadhlur Rahim and Fam, Soo Fen and Mohamad Zailani, Suhaiza Hanim (2021) Analysis Of Mitigation Strategy For Operational Supply Risk: An Empirical Study Of Halal Food Manufacturers In Malaysia. Uncertain Supply Chain Management, 9 (4). pp. 797-810. ISSN 2291-6822

Mustafa, Zaleha and Mansor, Muhd Ridzuan and Jumadi, Muhammad Taufiq and Hadi, Mohamad Amirul Asyraf and Masripan, Nor Azmmi and Ratanawilai, T. (2021) Effect Of Layering Sequence On Mechanical Properties Of Hybrid Oil Palm Empty Fruit Bunch/Kenaf Fibre Reinforce Epoxy Composites. Jurnal Tribologi, 29. pp. 1-10. ISSN 2289-7232

Mustafa, Zaleha and Tuan Nawi, Tuan Muhammad Idzuddin and Shamsudin, Zurina and Sheikh Md Fadzullah, Siti Hajar and Dhar Malingam, Sivakumar and Ratanawilai, Thanate (2021) Fatigue characteristic and Weibull analysis of sustainable rubberwood flour/recycled polypropylene composites. International Journal of Automotive and Mechanical Engineering, 18 (4). pp. 9179-9187. ISSN 2229-8649

Nabi, Fizza Ghulam and Sundaraj, Kenneth and Lam, Chee Kiang (2021) Asthma Severity Identification From Pulmonary Acoustic Signal For Computerized Decision Support System. Journal of the Pakistan Medical Association, 71 (1-A). pp. 41-46. ISSN 0030-9982

Naganthran, Kohilavani and Zainal, Nurul Amira and Mohd Nazar, Roslinda and Pop, Ioan Mihai (2021) Viscous dissipation and MHD hybrid nanofluid flow towards an exponentially stretching/shrinking surface. Neural Computing and Applications, 33 (17). pp. 11285-11295. ISSN 0941-0643

Naganthran, Kohilavani and Zainal, Nurul Amira and Nazar, Roslinda and Pop, Ioan (2021) Heat generation/absorption effect on MHD flow of hybrid nanofluid over bidirectional exponential stretching/shrinking sheet. Chinese Journal of Physics, 69. pp. 118-133. ISSN 0577-9073

Naganthran, Kohilavani and Zainal, Nurul Amira and Nazar, Roslinda and Pop, Ioan (2021) Unsteady EMHD stagnation point flow over a stretching/shrinking sheet in a hybrid Al2O3-Cu/H2O nanofluid. International Communications in Heat and Mass Transfer, 123. pp. 1-8. ISSN 0735-1933

Naganthran, Kohilavani and Zainal, Nurul Amira and Nazar, Roslinda and Pop, Ioan (2021) Unsteady MHD mixed convection flow in hybrid nanofluid at three-dimensional stagnation point. Mathematics, 9 (5). pp. 1-20. ISSN 2227-7390

Naganthran, Kohilavani and Zainal, Nurul Amira and Nazar, Roslinda and Pop, Ioan (2021) Unsteady MHD stagnation point flow induced by exponentially permeable stretching/shrinking sheet of hybrid nanofluid. Engineering Science And Technology, An International Journal, 24 (5). pp. 1201-1210. ISSN 2215-0986

Naganthran, Kohilavani and Zainal, Nurul Amira and Nazar, Roslinda and Pop, Ioan Mihai (2021) Stability Analysis Of MHD Hybrid Nanofluid Flow Over A Stretching/Shrinking Sheet With Quadratic Velocity. Alexandria Engineering Journal, 60 (1). pp. 915-926. ISSN 1110-0168

Naseri, Roszi Naszariah Nasni and Wan Ibrahim, Nik Rahila and Mohd Esa, Maryam and Ahmad, Nurul Zamratul Asyikin and Azis, Siti Noraziana and Abd Azis, Rafidah (2021) Determinant of consumer attitude towards online purchase intention of halal cosmetic: moderating effect of customers experience. International Journal Of Academic Research In Business And Social Sciences, 11 (7). pp. 1199-1216. ISSN 2222-6990

Nassiruddin, Muhammad Amirul Adli and Ab Wahab, Norfariza and Abdul Razak, Muhamad Harezul and Azizzi, Muhammad Ridzuan and Abu Bakar, Mohd Hadzley and Sasahara, Hiroyuki (2021) Micro-influence of vacuum block positions on machinability of acrylic using hybrid vacuum clamping system. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 145-158. ISSN 1985-5761

Nazar, Roslinda and Zainal, Nurul Amira and Naganthran, Kohilavani (2021) Unsteady MHD rear stagnation-point flow of a hybrid nanofluid with heat generation/absorption effect. Journal of Advanced Research In Fluid Mechanics And Thermal Sciences, 87 (1). pp. 41-51. ISSN 2289-7879

Nazar, Roslinda and Zainal, Nurul Amira and Naganthran, Kohilavani and Pop, Ioan (2021) Stability analysis of unsteady MHD rear stagnation point flow of hybrid nanofluid. Mathematics, 9 (19). pp. 1-15. ISSN 2227-7390

Nazar, Roslinda and Zainal, Nurul Amira and Naganthran, Kohilavani and Pop, Ioan (2021) Unsteady flow of a Maxwell hybrid nanofluid past a stretching/shrinking surface with thermal radiation effect. Applied Mathematics And Mechanics (English Edition), 42 (10). pp. 1511-1524. ISSN 0253-4827

Nazar, Roslinda and Zainal, Nurul Amira and Naganthran, Kohilavani and Pop, Ioan (2021) Unsteady transport phenomena of hybrid Al2O3-Cu/H2O nanofluid past a shrinking slender cylinder. Sains Malaysiana, 50 (12). pp. 3753-3764. ISSN 0126-6039

Ng, Lin Feng and Dhar Malingam, Sivakumar and Chen, Wei Ping (2021) Mechanical characterisation of kenaf/PALF reinforced composite-metal laminates: effects of hybridisation and weaving architectures. Journal of Reinforced Plastics and Composites, 40 (5-6). pp. 193-205. ISSN 0731-6844

Ngatiman, Nor Azazi and Mohd Shariff, Abdul Qaiyum and Sutikno, Tole and Wardiyono, Suparje and Manap, Mustafa and Jopri, Mohd Hatta (2021) Personal air-conditioning system using evapolar as heat waste management. Bulletin of Electrical Engineering and Informatics, 10 (6). pp. 2953-2963. ISSN 2302-9285

Ngatiman, Nor Azazi and Nuawi, Mohd Zaki and Putra, Azma and Qamber, Isa S. and Tole, Sutikno and Jopri, Mohd Hatta (2021) Sparkplug failure detection using Z-freq and machine learning. TELKOMNIKA (Telecommunication Computing Electronics and Control), 19 (6). pp. 2020-2029. ISSN 1693-6930

Nik Abd Malik, Nik Noordini and Mohammed Jawad, Mustafa and Murad, Noor Asniza and Mohd Esa, Mona Riza and Ahmad, Mohd Riduan and Mekki, Anwer Sabah and Al-Dhief, Fahad Taha and Hussein, Yaqdhan Mahmood (2021) Implantable slot antenna with substrate integrated waveguide for biomedical applications. TELKOMNIKA (Telecommunication Computing Electronics and Control), 19 (5). pp. 1450-1455. ISSN 1693-6930

Nik Anwar, Nik Syahrim and Ng, Yong Jie and Ng, Wei Yu and Law, Cheng Quan (2021) Development of a fall detection system based on neural network featuring IoT-Technology. International Journal of Human and Technology Interaction, 5 (1). pp. 37-46. ISSN 2590-3551

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. (2021) Numerical solution for crack phenomenon in dissimilar materials under various mechanical loadings. Symmetry, 13 (2). pp. 1-20. ISSN 2073-8994

Norli, Abdullah and Norizan, Mohd Nurazzi and Ngah Demon, Siti Zulaikha and Abdul Halim, Norhana and Mohamad, Imran Syakir (2021) The influence of reaction time on non-covalent functionalisation of P3HT/MWCNT nanocomposites. Polymers, 13 (12). pp. 1-17. ISSN 2073-4360

Omar, Ghazali and Ahmad, Intan Fatihah and A Hamid, Husna and Salim, Mohd Azli (2021) Effect Of Carbon Nanotube On Microstructure And Hardness Of Sn96.5Ag3.0Cu0.5 Solder For Microelectronic Packaging. International Review of Mechanical Engineering, 15 (7). pp. 346-354. ISSN 1970 - 8734

Omar, Ghazali and Esa, Siti Rahmah and Sheikh Md Fadzullah, Siti Hajar and Siow, Kim Shyong and Abdul Rahim, Bazura (2021) The evolutions of microstructure in pressureless sintered silver die attach material. International Journal of Nanoelectronics and Materials, 14 (2). pp. 179-194. ISSN 1985-5761

Omar, Ghazali and Masripan, Nor Azmmi and A. Hamid, Husna and Che Othaman, Siti Syahirah and Jasmee, Solehah (2021) Interface Thermal Resistance And Thermal Conductivity Of Polymer Composites At Different Types, Shapes, And Sizes Of Fillers: A Review. Polymer Composites, 42 (6). pp. 2629-2652. ISSN 0272-8397

Omar, Nooririnah and Yamada, Motohiro and Yasui, Toshiaki and Fukumoto, Masahiro (2021) Bonding mechanism of cold-sprayed TiO2 coatings on copper and aluminum substrates. Coatings, 11 (11). pp. 1-25. ISSN 2079-6412

Ono, Takahito and Li, Yi Jie and Wang, Zhuqing and Toan, Nguyen Van and Samat, Khairul Fadzli (2021) Formation And Evaluation Of Silicon Substrate With Highly-Doped Porous Si Layers Formed By Metal-Assisted Chemical Etching. Nanoscale Research Letters, 16 (64). pp. 1-8. ISSN 1931-7573

Pang, Kok-An and Abdul Latip, Shekh Faisal (2021) Key-dependent side-channel cube attack on CRAFT. ETRI Journal, 43 (2). pp. 344-356. ISSN 2233-7326

Panirchelvam, Dinesh and Abdullah, Norida and Mohammad Rawi, Ali Hafizar and Mohd Noor, Ahmad Ridzwan and Al-Shami, Samer Ali Hussein (2021) Determinants Of Physical Store's Customer Satisfaction Among University Students. Academy of Strategic Management Journal, 20 (SI6). pp. 1-8. ISSN 1544-1458

Phang, Fatin Aliah and Wong, Adam Yoon Khang and Jamil Alsayaydeh, Jamil Abedalrahim and Pusppanathan, Jaysuman and Nawi, Nina Diana and Zulkifli, Nur Amira and Che Harun, Fauzan Khairi and Tee, Kian Sek and Zulkapri, Izwyn (2021) Integrating Drone Technology In Service Learning For Engineering Students. International Journal of Emerging Technologies in Learning, 16 (15). pp. 78-90. ISSN 1868-8799

Phuman Singh, Amrik Singh and Putra, Azma and Abu Kassim, Khairil Anwar (2021) Time To Collision For Emergency Obstacle Avoidance. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 223-234. ISSN 2600-8092

Polska, Olga and Jamil Alsayaydeh, Jamil Abedalrahim and Shkarupylo, Vadym (2021) QoS-Aware Web-Services Ranking: Normalization Techniques Comparative Analysis For LSP Method. ARPN Journal Of Engineering And Applied Sciences, 16 (2). pp. 248-254. ISSN 1819-6608

Pop, Ioan and Waini, Iskandar and Ishak, Anuar (2021) Unsteady Hybrid Nanofluid Flow On A Stagnation Point Of A Permeable Rigid Surface. ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik, 101 (6). pp. 1-14. ISSN 0044-2267

Pop, Ioan Mihai and Md Arifin, Norihan and Wahid, Nur Syahirah and Khashi’ie, Najiyah Safwa (2021) Marangoni Hybrid Nanofluid Flow Over A Permeable Infinite Disk Embedded In A Porous Medium. International Communications in Heat and Mass Transfer, 126. 01-08. ISSN 0735-1933

Pop, Ioan Mihai and Md Arifin, Norihan and Wahid, Nur Syahirah and Khashi’ie, Najiyah Safwa (2021) Mixed Convection Of A Three-Dimensional Stagnation Point Flow On A Vertical Plate With Surface Slip In A Hybrid Nanofluid. Chinese Journal of Physics, 74. pp. 129-143. ISSN 0577-9073

Purnamirza, Teddy and Mohd Ibrahim, Imran and Susanti, Rika and Sutoyo and Mulyono and Radiles, Hasdi and Rahmi, Depriwana (2021) Cutting Technique For Constructing Small Radial Line Slot Array Antennas. Journal Of Electromagnetic Engineering And Science, 21 (1). pp. 35-43. ISSN 2671-7255

Purnamirza, Teddy and Nawawi, Ahmad and Mohd Ibrahim, Imran and Rahmi, Depriwana (2021) The utilization of backgrounds as radiating elements to construct multibeam radial line slot array (RLSA) antennas. International Journal on Communications Antenna and Propagation, 11 (2). pp. 118-126. ISSN 2039-5086

Putra, Azma and Wan Mohamad, Wan Mohd Farid and Al Munawir and Herawan, Safarudin (2021) Corrected Statistical Energy Analysis Model In A Non-Reverberant Acoustic Space. Sound and Vibration, 55 (3). pp. 203-219. ISSN 1541-0161

Qamar, Faizan and Yu, Keping and Al-Khaleefa, Ahmed Salih and Hassan, Rosilah and Ahmad, Mohd Riduan and Wen, Zheng and Mohd Aman, Azana Hafizah (2021) Performance evaluation of online machine learning models based on cyclic dynamic and feature-adaptive time series. IEICE Transactions on Information and Systems, E104-D (8). pp. 1172-1184. ISSN 0916-8532

Rafeea, Salama Jamal and Al-Shami, Samer Ali Hussein and Alkaabi, Khaled Mohammed and Abdul Rashid, Nurulizwa (2021) Healthcare industry challenges and potential opportunities in the Uae. A review paper. Academy of Strategic Management Journal, 20 (SI2). pp. 1-9. ISSN 1544-1458

Rahim, Sarni Suhaila and Dolhalit, Mohamad Lutfi and A’bas, Nurul Najihah and Parumo, Shahril and Saifudin, Wan Sazli Nasaruddin and Abdullasim, Nazreen and Raja Omar, Raja Norliza and Md Khair, Siti Zakiah and Kalaichelvam, Khavigpriyaa and Noor Izhar, Syazwan Izzat (2021) Web usability testing on diabetic retinopathy consultation system. Ingenierie des Systemes d'Information, 26 (3). pp. 255-264. ISSN 1633-1311

Rahmat, Suharni and Abdul Hamid, Mohd Syaiful Rizal and Chew, Boon Cheong (2021) Green and sustainability criteria in Malaysia’s poultry production and management. Journal of Sustainability Science and Management, 16 (5). pp. 140-163. ISSN 2672-7226

Rahmiati, Filda and Bakri, Mohammed Hariri and Shuyuan, Fu (2021) Assessment of trip experience from Chinese tourists' perspectives on Indonesia tourism. Geojournal of Tourism and Geosites, 38 (4). pp. 1083-1088. ISSN 2065-1198

Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Lamat, Arshad and Rosman, Muhammad Rafiq and Kasman, Muhammad Zaki and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Raja Abdullah, Raja Syamsul Azmir (2021) Quality Evaluation On Rotary Ultrasonic Assisted Drilling For Chemically Strengthened Glass. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 353-362. ISSN 1985-5761

Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Rosman, Muhammad Rafiq and Lamat, Arshad and Salleh, Mohd Shukor and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi and Abdullah, R.S.A. (2021) Effects of cutter geometry and cutting parameters on machining Al/SiC Metal Matrix Composites (MMC). International Journal of Nanoelectronics and Materials, 14 (SI). pp. 343-352. ISSN 1985-5761

Raja Ikram, Raja Rina and Abd Ghani, Mohd Khanapi and Salahuddin, Lizawati and Naim @ Mohayat, Mohd Hariz and Idris, Ariff and Ngo, Hea Choon and Kanchymalay, Kasturi and Hasan Basari, Abd Samad and Ishak, Nadiah and Ab Hamid, Noor Raihan (2021) Acceptance Of Electronic Health Records In Traditional Malay Medicine: An Exploratory Prototyping Approach. International Journal of Integrated Engineering, 13 (4). pp. 40-51. ISSN 2229-838X

Raja Othman, Raja Nor Firdaus Kashfi and Khalid, Muhamad `Ariff and Md Zuki, Nor Aishah and Othman, Md Nazri and Abdul Shukor, Fairul Azhar and Aravind Vaithilingam, Chockalingam (2021) Performance Analysis Of Brushless Dc Motor With Optimum Magnetic Energy For Bicycle Application. International Journal of Power Electronics and Drive Systems, 12 (4). pp. 2113-2122. ISSN 2088-8694

Raja Othman, Raja Nor Firdaus Kashfi and Md. Aris, Muhammad Asyraff and Abdul Shukor, Fairul Azhar and Mohd Nasir, Nur Ashikin and Md Zuki, Nor Aishah (2021) Design And Analysis Of Linear Switched Reluctance Motor. Indonesian Journal of Electrical Engineering and Computer Science, 24 (2). pp. 704-714. ISSN 2502-4752

Ramli, Mohd Sufian and Hasan, Khairul Kamarudin and Md Saat, Mohd Shakir and Yusop, Yusmarnita and Abdul Majid, Masmaria (2021) Analysis And Design Of Class E-LCCL Compensation Circuit Topology Circuit Topology For Capacitive Power Transfer System. International Journal of Power Electronics and Drive Systems, 12 (2). pp. 1265-1274. ISSN 2088-8694

Rasin, Zulhani and Tan, Chee Ting and Chan, Sia Ching (2021) Design and simulation of cascaded H-bridge multilevel inverter with energy storage. Indonesian Journal of Electrical Engineering and Computer Science, 23 (3). pp. 1289-1298. ISSN 2502-4752

Razak, Nurul Hanim and Hashim, Haslenda and Yunus, Nor Alafiza and Klemeš, Jiří Jaromír (2021) Biorefinery Localization Using Analytical Hierarchy Process. Chemical Engineering Transactions, 89. pp. 589-594. ISSN 2283-9216

Razak, Nurul Hanim and Hashim, Haslenda and Yunus, Nor Alafiza and Klemeš, Jiří Jaromír (2021) Integrated GIS-AHP Optimization For Bioethanol From Oil Palm Biomass Supply Chain Network Design. Chemical Engineering Transactions, 83. pp. 571-576. ISSN 2283-9216

Razali, Nadlene and Dhar Malingam, Sivakumar and Jamadi, Aida Haryati and Mohammad Taha, Mastura and Lazim, Yusriah and Rushdan, Ahmad Ilyas (2021) Natural fibre filament for Fused Deposition Modelling (FDM): a review. International Journal of Sustainable Engineering, 14 (6). pp. 1988-2008. ISSN 1939-7038

Razi, Atikah and Ab Syukor, Syahar Azalia and Hidayat, M.Nabil (2021) Comparative performance analysis of Bipolar and Unipolar pseudo-based inverter for off-grid photovoltaic application. Journal of Electrical and Electronic Systems Research (JEESR), 19. pp. 43-50. ISSN 1985-5389

Richardson, G.W. and Ranom, Rahifa and Foster, Jamie M. and Please, Colin and Ramos, Ángel Manuel (2021) Charge transport modelling of Lithium-ion batteries. European Journal of Applied Mathematics, 33 (6). pp. 1-49. ISSN 0956-7925

Ryandono, Muhamad Nafik Hadi and Qulub, A Syifaul and Cahyono, Eko Fajar and Widiastuti, Tika and Nur Aisyah and Robani, Anidah (2021) Efficiency Analysis Of Zakat Institutions In Indonesia: Data Development Analysis (DEA) And Free Disposal Hull (FDH) Approaches. Academy of Accounting and Financial Studies Journal, 25 (6). pp. 1-12. ISSN 1096-3685

Saharuddin, Nur Zawani and Zainal Abidin, Izham and Mokhlis, Hazlie and Hassan, Mohammad Yusri (2021) Power System Controlled Islanding Using Modified Discrete Optimization Techniques. International Journal of Advanced Computer Science and Applications, 12 (7). pp. 487-492. ISSN 2158-107X

Saharuddin, Nur Zawani and Zainal Abidin, Izham and Mokhlis, Hazlie and Shair, Ezreen Farina (2021) Load shedding scheme based metaheuristic technique for power system controlled islanding. Indonesian Journal of Electrical Engineering and Computer Science, 23 (3). pp. 1306-1314. ISSN 2502-4752

Sainuddin, Nurulidayu and Mohd Sultan, Juwita and Idris, Fakrulradzi and Mohd Azuani (2021) Data collision and interference minimization in wireless sensor network using node data addressing with random access time. Jurnal Kejuruteraan, 33 (4). pp. 1105-1112. ISSN 0128-0198

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan (2021) Predictive modeling of mixed halide perovskite cell using hybrid L27 OA Taguchi-based GA-MLR-GA approach. Jurnal Teknologi, 84 (1). pp. 1-9. ISSN 2180–3722

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan and Mohd Zain, Anis Suhaila and Roslan, Ameer Farhan and Ahmad, Ibrahim (2021) Work Function Variations On Electrostatic And RF Performances Of JLSDGM Device. Indonesian Journal of Electrical Engineering and Computer Science, 23 (1). pp. 150-161. ISSN 2502-4752

Saleman, Abdul Rafeq and Zakaria, Mohamad Shukri and Jumaidin, Ridhwan and Maslan, Mohd Nazmin (2021) Ultra-thin liquid film with shear and the influences on thermal energy transfer at solid–liquid interfaces of simple liquid methane in contact with (110) surface structure of face-centred cubic lattice (FCC). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 87 (3). pp. 21-30. ISSN 2289-7879

Salim, Fadzilah and Abu, Nor Azman (2021) Used Car Price Estimation: Moving From Linear Regression Towards A New S-Curve Model. International Journal of Business and Society, 22 (3). pp. 1174-1187. ISSN 1511-6670

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Ali, Murni and Dai, Feng (2021) Measurement of optimal stretchability graphene conductive ink pattern by numerical analysis. Defence S and T Technical Bulletin, 14 (1). pp. 43-54. ISSN 1985-6571

Salim, Mohd Azli and Ab Wahid, Ameeruz Kamal and Masripan, Nor Azmmi and Md. Saad, Adzni and Photong, Chonlatee (2021) Comparison measurements of low resistance and high strength on synthesis graphene conductive ink filled epoxy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 333-342. ISSN 1985-5761

Salim, Mohd Azli and Hosnie, Aina Natasha and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Naroh, Azmi and Feng, Dai (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink in various patterns. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 439-456. ISSN 1985-5761

Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Ab Wahid, Ameeruz Kamal and Ali, Murni and Al-Mola, Mohammed Hussin A. (2021) The Effect Of Curing Time On Electrical Resistivity, Mechanical Characteristics And Microstructure Behavior Of Graphene Conductive Ink. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 373-386. ISSN 1985-5761

Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Abdul Hamid, Nurfaizey and Feng Dai and Mohd Yusof, Norbazlan (2021) Prediction Of Basic And Circular Vibration Isolator In High Frequencies Using Malaysian Natural Rubber For Highway C2L Machine. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 241-262. ISSN 1985-5761

Salim, Mohd Azli and Masripan, Nor Azmmi and Md. Saad, Adzni and Dai, Feng and Noordin, Aminurrashid and Mohd Yusof, Norbazlan (2021) Mathematical modelling of passive discrete lumped parameter system using standard Malaysian rubber constant viscosity. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 289-310. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Abdullah, Siti Amirah and Wasbari, Faizil and Ali, Murni and Feng Dai (2021) Geometrical Characterization And Effect Of Temperature On Graphene Nanoparticles Conductive Ink. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 275-287. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Ahmad, Fauzi and Akop, Mohd Zaid and Al-Mola, Mohammed Hussin A. and Saad, Hartini (2021) Effect of the different printing patterns of graphene nanoparticles in conductive ink on electrical and mechanical performance. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 225-240. ISSN 1985-5761

Salim, Mohd Azli and Md. Saad, Adzni and Ahmad, Fauzi and Hamidi, Roshidah and Ali, Murni and Dai, Feng (2021) Electrical, morphological and surface roughness analysis of silver nanoparticles-filled epoxy conductive ink. Defence S and T Technical Bulletin, 14 (2). pp. 123-134. ISSN 1985-6571

Salim, Mohd Azli and Md. Saad, Adzni and Akop, Mohd Zaid and Photong, Chonlatee and Md. Zain, Mohd Zarhamdy and Abu Bakar, Abd Rahim and Mohd Yusof, Norbazlan (2021) Modelling and estimation on vibration and noise level of the dynamic wiper system using input shaping strategy. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 311-332. ISSN 1985-5761

Salim, Mohd Azli and Mokhlis, Maizura and Masripan, Nor Azmmi and Md. Saad, Adzni and Sudin, Mohd Nizam and Dai, Feng and Naroh, Azmi (2021) Characterisation of mechanical-electrical properties of graphene nanoplatelets filled epoxy as conductive ink. Defence S and T Technical Bulletin, 14 (1). pp. 26-42. ISSN 1985-6571

Salit, Mohd. Sapuan and K.Z., Hazrati and Mohamed Yusoff, Mohd Zuhri and Jumaidin, Ridhwan (2021) Preparation And Characterization Of Starch-Based Biocomposite Films Reinforced By Dioscorea Hispida Fibers. Journal of Materials Research and Technology, 15. pp. 1342-1355. ISSN 2238-7854

Salit, Mohd. Sapuan and Mohamed Yusoff, Mohd Zuhri and Kamaruddin, Zatil Hazrati and Jumaidin, Ridhwan (2021) Effect Of Plasticizers On Physical, Thermal, And Tensile Properties Of Thermoplastic Films Based On Dioscorea Hispida Starch. International Journal of Biological Macromolecules, 185. pp. 219-228. ISSN 0141-8130

Salleh, Mohd Shukor and Hashim, Hanizam and Abd Rahman, Ammar and Sulong, Abu Bakar and Abd Rahman, Ammar (2021) Influence Of Short Heat Treatment On The Microstructures And Mechanical Properties Of Thixoformed Aluminum Alloy Composite. Jurnal Tribologi, 28. pp. 96-104. ISSN 2289-7232

Salleh, Mohd Shukor and Mohammad Ali, Nur Fatihatur Rawdhah and Yahaya, Saifudin Hafiz and Al-Zubaidi, S.S. (2021) Effects Of Induction Heating On Thixoformed MWCNT-Al Alloy Composite. Journal of Advanced Manufacturing Technology, 15 (1). pp. 27-37. ISSN 1985-3157

Sameer, Alani and Zakaria, Zahriladha and Ahmad, Asmala and Saeidi, Tale and Imran, Muhammad Ali and Abbasi, Qammer H. (2021) Microwave imaging of breast skin utilizing elliptical UWB antenna and reverse problems algorithm. Micromachines, 12 (6). pp. 1-17. ISSN 2072-666X

Samsudin, Adam and Azmi, Ezzatul Farhain and Zainal Abidin, Amar Faiz and Mohd Azahar, Mohammad Izzat Syamil and Md Sarif, Norhafizah (2021) The Development Of IoT Controlled Hybrid Power Switching. ARPN Journal Of Engineering And Applied Sciences, 16 (14). pp. 1478-1484. ISSN 1819-6608

Samsudin, Adam and Nasir, Muhamad Salihin and Hasim, Nur Aiman Hanis and Azmi, Ezzatul Farhain and Md Sarif, Norhafizah and Ashaari, Azmirul (2021) Automated Grass Cutter Using Voice Recognition. ARPN Journal of Engineering and Applied Sciences, 16 (5). pp. 532-537. ISSN 1819-6608

Saptari, Adi and Halim, Isa and Abulais, Mohd Fairil and Padmanathan, Vinothini (2021) Integrated Measurement System Of Postural Angle And Electromyography Signal For Manual Materials Handling Assessment. International Journal of Integrated Engineering, 13 (6). pp. 27-38. ISSN 2229-838X

Sapuan, Mohd. Sapuan and K. Z. Hazrati and Moh Zuhri, Mohd Yusoff and Jumaidin, Ridhwan (2021) Extraction And Characterization Of Potential Biodegradable Materials Based On Dioscorea Hispida Tubers. Polymers, 13 (4). pp. 1-19. ISSN 2073-4360

Sarban Singh, Ranjit Singh and Anas, Siti Aisyah and Zainurin, Nur Ariana (2021) A Review Of Battery Charging - Discharging Management Controller: A Proposed Conceptual Battery Storage Charging – Discharging Centralized Controller. Engineering, Technology & Applied Science Research, 11 (4). pp. 7515-7521. ISSN 1792-8036

Sarban Singh, Ranjit Singh and Lachumanan, Thilagawathy and Shapiai, Mohd Ibrahim and Thangaraj, Joseph Sahaya Anand (2021) Analysis of a multilevel voltage-based coordinating controller for solar-wind energy generator: a simulation, development and validation approach. Engineering, Technology & Applied Science Research, 11 (6). pp. 7793-7799. ISSN 2241-4487

Sarkawi, Hafez and Ohta, Yoshito and Rapisarda, Paolo (2021) On The Switching Control Of The DC–DC Zeta Converter Operating In Continuous Conduction Mode. IET Control Theory and Applications, 15 (9). pp. 1185-1198. ISSN 1751-8644

Sekar, Vignesh and Eh Noum, Se Yong and Sivanesan, Sivakumar and Putra, Azma and Chin Vui Sheng, Desmond Daniel and Kassim, Dg Hafizah (2021) Effect of thickness and infill density on acoustic performance of 3D printed panels made of natural fiber reinforced composites. Journal of Natural Fibers. pp. 1-9. ISSN 1544-0478

Sekar, Vignesh and Kassim, Dg Hafizah and Putra, Azma and Noum, Se Yong Eh and Sivanesan, Sivakumar and Chin, Kok Chun and Wong, Yi San (2021) Acoustic Properties Of Micro-Perforated Panels Made From Oil Palm Empty Fruit Bunch Fiber Reinforced Polylactic Acid. Sound and Vibration, 55 (4). pp. 343-352. ISSN 1541-0161

Selamat, Mohd Nasir and Mohd, Rusyda Helma and Abdul Aziz, Siti Fardaniah and Omar, Nik Hairi and Mukapit, Mukhiffun (2021) A review on participatory ergonomic approaches: What ‘participants’ mean to the organization? International Journal Of Academic Research In Business And Social Sciences, 11 (8). pp. 612-627. ISSN 2222-6990

Selamat, Mohd Zulkefli and Jamil, Noor Ashikin and Hasan, Rafidah and Dhar Malingam, Sivakumar (2021) Effect Of carbon fiber loading in gaphite-polypropylene composite properties as bipolar plate for polymer electrolyte membrane fuel cell. Malaysian Journal of Analytical Sciences, 25 (5). pp. 766-775. ISSN 1394-2506 (Unpublished)

Selamat, Siti Rahayu and Syafrizal, Melwin and Zakaria, Nurul Azma (2021) Avoiditals: Enhanced Cyber-Attack Taxonomy In Securing Information Technology Infrastructure. International Journal of Computer Science and Network Security, 21 (8). pp. 1-12. ISSN 1738-7906

Selva Raja, Hemananthiny and Aris, Amir and Mohamad, Norhidayah (2021) The relationship between employer branding and talent management: a study on manufacturing sector. Estudios De Economia Aplicada, 39 (10). pp. 1-15. ISSN 1133-3197

Seman, Norhudah and Anwar Apandi, Nur Ilyana and Elijah, Olakunle and Han, Chua Tien and Li, Yonghui (2021) Stochastic geometry analysis of electromagnetic field exposure in coexisting sub-6 GHz and millimeter wave networks. IEEE Access, 9. pp. 112780-112791. ISSN 2169-3536

Shair, Ezreen Farina and Suleiman, Muhammad Fadhlin Ashraf and Abdullah, Abdul Rahim and Saharuddin, Nur Zawani and Nazmi, Nurhazimah (2021) Reduction Of Limb Position Invariant Of SEMG Signals For Improved Prosthetic Control Using Spectrogram. International Journal of Integrated Engineering, 13 (5). pp. 79-88. ISSN 2229-838X

Shairi, Noor Azwan and Zolkefli, Amirul Aizat and Ahmad, Badrul Hisham and Othman, Adib and Hassim, Nurulhalim and Zakaria, Zahriladha and Mohd Ibrahim, Imran and A Majid, Huda (2021) Switchable Bandstop To Allpass Filter Using Cascaded Transmission Line SIW Resonators In K-Band. Bulletin of Electrical Engineering and Informatics, 10 (5). pp. 2617-2626. ISSN 2089-3191

Shamsudin, Shamsul Anuar and Abd Aziz, Muhammad Syahril and Sudin, Mohd Nizam and Ismail, Mohd. Farid and Huthaifa Ahmad Al-Issa (2021) Performance Of Thermal Electric Cooling (TEC) Air Condition For A Small Office Space. International Journal of Nanoelectronics and Materials, 14 (SI). pp. 395-412. ISSN 1985-5761

Shamsudin, Shamsul Anuar and Abd Rahman, Norasra and Zainal, Zairulazha and Md Yusof, Hasrul Izatie and Al-Issa, Huthaifa Ahmad (2021) Initial study on safety hazards by heavy transportation on Malaysian roads. International Journal of Integrated Engineering, 14 (4). pp. 339-349. ISSN 2229-838X

Shariffuddin, Nor Shafiqin and Azis, Norhafiz and Mohd Selva, Amran and Yahaya, Muhammad Sharil and Jasni, Jasronita and Ab Kadir, Mohd Zainal Abidin and Talib, Mohd Aizam (2021) FAILURE RATE ESTIMATION FOR TRANSFORMER POPULATION BASED ON HEALTH INDEX THROUGH MARKOV MODEL APPROACH. PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 29 (4). 3029 - 3042. ISSN 0128-7680

Shikh Anuar, Fadhilah and Mohd Sa'at, Fatimah Al-Zahrah and Mat Tokit, Ernie and Narasimmanaidu, Satishwara Rao (2021) Numerical and experimental study of flow behaviours in porous structure of aluminium metal foam. Evergreen, 8 (3). pp. 658-666. ISSN 2189-0420

Shkarupylo, Vadym V. and Jamil Alsayaydeh, Jamil Abedalrahim and Dusheba, Valentyna V. and Tomičić, Igor and Chemeris, Alexander A. (2021) A technique for checking the adequacy of formal model. ARPN Journal of Engineering and Applied Sciences, 16 (16). pp. 1707-1719. ISSN 1819-6608

Soin, Norhayati and Zakaria, Zahriladha and Salim, Sani Irwan and Jaafar, Anuar and Wan Muhamad Hatta, Sharifah Fatmadiana (2021) Multipoint Detection Technique With The Best Clock Signal Closed-Loop Feedback To Prolong FPGA Performance. Applied Sciences (Switzerland), 11 (14). pp. 1-19. ISSN 2076-3417

Subramaniam, Siva Kumar and Azman, Amierul Syazrul and Ikhwan Lee, Mohamad Yusry Lee and Feroz, Farah Shahnaz (2021) Dual Designated Path Routing Algorithm For Congestion Control In High-Density Network. Journal of Theoretical and Applied Information Technology, 99 (7). pp. 1608-1620. ISSN 1992-8645

Subramaniam, Siva Kumar and Feroz, Farah Shahnaz and Azman, Amierul Syazrul Azril and Ikhwan Lee, Mohamad Yusry Lee (2021) Novel Wireless Sensor Network Routing Protocol Performance Evaluation Using Diverse Packet Size For Agriculture Application. International Journal of Integrated Engineering, 13 (4). pp. 16-28. ISSN 2229-838X

Subramaniam, Siva Kumar and Ikhwan Lee, Mohamad Yusry Lee and Feroz, Farah Shahnaz and Azman, Amierul Syazrul Azril (2021) Designated Path Routing Algorithm For Dense Wireless Sensor Network. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (3). pp. 1520-1526. ISSN 2502-4752

Subramonian, Sivarao and Abdul Khalim, Abdul Zuhair and Salleh, Mohd Shukor and Md Ali, Mohd Amran and Kadirgama, Kumaran and U.K. Dubey and Pujari, Satish and Dhar Malingam, Sivakumar (2021) Artificial neural network predictive modelling of laser micro-grooving for commercial pure titanium (CP Ti) grade 2. Journal of Mechanical Engineering, 18 (2). pp. 217-234. ISSN 1823-5514

Sued, Mohammad Kamil and Zainal Abidin, Muhammad Zaimi and Mohd Nasir, Siti Noor Najihah (2021) Evaluation of current, force and temperature signals on welding formation of bobbin friction stir welded AA1100. International Journal of Automotive and Mechanical Engineering, 18 (1). pp. 8434-8441. ISSN 2180-1606

Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Ab Razak, Juhari and Ab Rahman, Azhan (2021) Achieving Energy Cost Saving Using Best Energy Tariff: A Case Study Of A Sewage Plant. International Review of Electrical Engineering (IREE), 16 (1). pp. 68-77. ISSN 1827- 6660

Sukri, Mohamad Firdaus and Sumeru, Kasni and Pramudantoro, Triaji Pangripto and Erham, Eddy and Muliawan, Rizki (2021) Experimental evaluation on a centralized air conditioning system embedded with a split-type air conditioner as a dedicated subcooler. Journal of Building Engineering, 43. pp. 1-8. ISSN 2352-7102

Sulaima, Mohamad Fani and Abdul Kadir, Aida Fazliana and Bujal, Noor Ropidah and Abd Halim, Mohd Nazri and Hassan, Elia Erwani (2021) Analysis of load variation consideration for optimal distributed generation placement. International Journal of Advanced Computer Science and Applications, 12 (4). pp. 366-372. ISSN 2158-107X

Sulaima, Mohamad Fani and Alias, Nur Umirah and Wan Abdul Razak, Intan Azmira and Sardi, Junainah and Bohari, Zul Hasrizal (2021) Optimal cost benefit of the EToU electricity tariff for a manufacturing operation by using optimization algorithm. ARPN Journal of Engineering and Applied Sciences, 16 (15). pp. 1610-1615. ISSN 1819-6608

Sulaima, Mohamad Fani and Dahlan, Nofri Yenita and Bohari, Zul Hasrizal and Mohd Nasir, Mohamad Na'im and Mustafa, R.F. and Nguyen, Duc Luong (2021) Simultaneous load management strategy for electronic manufacturing facilities by using EPSO algorithm. Journal of Mechanical Engineering, 18 (3). pp. 193-214. ISSN 1823-5514

Sulaiman, Siti Fatimah and Faudzi, Ahmad Athif and Khairuddin, Osman and Samsudin, Sharatul Izah and Sulaiman, Noor Asyikin and Zainal Abidin, Amar Faiz and Rahmat, M. F. (2021) Pneumatic Positioning Control System Using Constrained Model Predictive Controller: Experimental Repeatability Test. International Journal Of Electrical And Computer Engineering (IJECE), 11 (5). pp. 3913-3923. ISSN 2088-8708

Sulaiman, Siti Fatimah and Rahmat, Mohd Fua'ad and Faudzi, Ahmad Athif and Khairuddin, Osman and Sunar, Noorhazirah (2021) Enhancement in pneumatic positioning system using nonlinear gain constrained model predictive controller: experimental validation. Indonesian Journal of Electrical Engineering and Computer Science, 23 (3). pp. 1385-1397. ISSN 2502-4760

Sumeru, Kasni and Panjaitan, Neni Emrida and Tohir, Toto and Sukri, Mohamad Firdaus (2021) Experimental investigation on outdoor and indoor PM2.5 and PM10 in supermarkets in Bandung during COVID-19 pandemic. International Journal Of Applied Technology Research, 2 (2). pp. 127-135. ISSN 2721-7582

Sunar, Noorhazirah and Rahmat, Mohd Fuaad and MohdFaudzi, Ahmad ‘Athif and Ismail, Zool Hilmi and Othman, Siti Marhainis and Sulaiman, Siti Fatimah and Abd Wahab, Nur Haliza (2021) Application of electromagnetic sensor in electro-pneumatic actuator displacement control under variable loads conditions: experimental analysis. Journal of Tomography System & Sensors Application, 4 (2). pp. 95-108. ISSN 0636-9133

Sundaraj, Kenneth and Talib, Irsa and Lam, Chee Kiang (2021) Crosstalk In Mechanomyographic Signals From Elbow Flexor Muscles During Submaximal To Maximal Isometric Flexion, Pronation, And Supination Torque Tasks. Journal of Biomechanical Engineering, 143 (1). pp. 1-8. ISSN 0148-0731

Sundaraj, Kenneth and Uwamahoro, Raphael and M.Subramaniam, Indra Devi (2021) Assessment of muscle activity using electrical stimulation and mechanomyography: A systematic review. BioMedical Engineering Online, 20 (1). 01-47. ISSN 1475-925X

Susanto, Edi and Othman, Norfaridatul Akmaliah (2021) The factors influencing modeling of collaborative performance supply chain: a review on fresh produce. Uncertain Supply Chain Management, 9. pp. 373-392. ISSN 2291-6822

Tengku Sharif, Tengku Intan Suzila and Mohamad Noor, Mohd Yusri and Omar, Siti Rohana (2021) MOOC Developers’ Motivation. GADING (Online) Journal for Social Sciences, 24 (4). pp. 36-42. ISSN 2600-7568

Teo, Hong Chun and Ahmad, Sabrina and Hashim, Ummi Rabaah and Ngo, Hea Choon and Kanchymalay, Kasturi and Ismail, Nor Haslinda and Salahuddin, Lizawati (2021) Identification Of Wood Defect Using Pattern Recognition Technique. International Journal Of Advances In Intelligent Informatics, 7 (2). pp. 163-176. ISSN 2442-6571

Tofrowaih, Khairul Amri and Sulaiman, Saiful Naim and Azlan, Khairul Azri and Ab Razak, Mohd Suffian and Abdul Rahman, Mohd Hafizi and Lubis, Abdul Munir Hidayat Syah and M.S.Abdul Samad and A. L.Achmad Joehary (2021) Evaluation of SUV roof crush analysis using alternative non-linear structural analysis solver. Journal of the Society of Automotive Engineers Malaysia, 5 (2). pp. 176-184. ISSN 2600-8092

Too, Jing Wei and Abdullah, Abdul Rahim (2021) A New And Fast Rival Genetic Algorithm For Feature Selection. Journal of Supercomputing, 77 (3). pp. 2844-2874. ISSN 0920-8542

Wahjono, Sentot Imam and Fam, Soo Fen and Pakkanna, Mukhaer and Rasulong, Ismail and Anna Marina (2021) Promoting Creators Intentions: Measurement Of Crowdfunding Performance. International Journal of Business and Society, 22 (3). pp. 1084-1101. ISSN 1511-6670

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2021) Dufour And Soret Effects On Al2o3-Water Nanofluid Flow Over A Moving Thin Needle: Tiwari And Das Model. International Journal of Numerical Methods for Heat and Fluid Flow, 31 (3). pp. 766-782. ISSN 0961-5539

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2021) MHD Glauert Flow Of A Hybrid Nanofluid With Heat Transfer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 86 (2). pp. 91-100. ISSN 2289-7879

Wakhi Anuar, Nur Farah Bazilah and Mohd Khusairi, Muhammad Luqman and Aboo Hassan, Salleh and Marjom, Zolkarnain and Abdul Rasib, Amir Hamzah and Mohd Said, Rahaini (2021) Green strength properties of waterjet abrasive waste as potential composition in green mould By Taguchi And ANOVA approach. Journal Of Mechanical Engineering And Sciences, 15 (4). pp. 8529-8539. ISSN 2289-4659

Wan Abdul Razak, Intan Azmira and Upkli, Wenny Rumy and Sardi, Junainah (2021) Particle swarm optimization for least square support vector machine in medium-term electricity price prediction. Turkish Journal of Computer and Mathematics Education, 12 (8). pp. 2044-2052. ISSN 1309-4653

Wasbari, Faizil and Salim, Mohd Azli and Abdul Hamid, Nurfaizey (2021) Investigation of pressure drop in hydro-pneumatic driveline propulsion system for dual hybrid passenger vehicle. International Journal of Nanoelectronics and Materials, 14. pp. 413-428. ISSN 1985-5761

Wong, Adam Yoon Khang and Azman, Nur Azzurin Afifie and Muhammad Amin, Ahmad Fairuz and Jamil Alsayaydeh, Jamil Abedalrahim and Indra, Win Adiyansyah and Ja'afar, Abd Shukur and Herawan, Safarudin Gazali and Ramli, Arnidza (2021) Evaluation Method Of Mesh Protocol Over ESP32 And ESP8266. Baghdad Science Journal, 18 (4). pp. 1397-1405. ISSN 2078-8665

Wong, Adam Yoon Khang and Indra, Win Adiyansyah and Jamil Alsayaydeh, Jamil Abedalrahim and Mohamat Gani, Johar Akbar and M. Idrus, Sevia and Pusppanathan, Jaysuman (2021) Resource Efficient For Hybrid Fiber-Wireless Communications Links In Access Networks With Multi Response Optimization Algorithm. ARPN Journal of Engineering and Applied Sciences, 16 (1). pp. 45-50. ISSN 1819-6608

Wong, Adam Yoon Khang and Jamil Alsayaydeh, Jamil Abedalrahim and Latif, Saiful Sophian and Mohamat Gani, Johar Akbar and Pusppanathan, Jaysuman (2021) Interactive voice recognition based smart mirror for Malaysia commercial guest room. ARPN Journal of Engineering and Applied Sciences, 16 (21). pp. 2281-2288. ISSN 1819-6608

Wong, Yan Chiew and Tan, Yee Leong and Ahmad Radzi, Syafeeza (2021) Brain-inspired spiking neural networks for Wi-Fi based human activity recognition. Jordanian Journal Of Computers And Information Technology, 7 (4). pp. 363-372. ISSN 2413-9351

Wong, Yan Chiew and Yap, Jim Hui (2021) A Complete Design And Development Of A Miniature Battery-Less Power Management Unit For Powering Biomedical Implant. Journal Of Engineering Science and Technology, 16 (5). pp. 3851-3865. ISSN 1823-4690

Yaacob, Mohd Rusdy and Buchhave, Preben and Velte, Clara Marika (2021) Mapping Of The Energy Cascade In The Developing Region Of A Turbulent Round Jet. Evergreen, 8 (2). pp. 379-396. ISSN 2189-0420

Yaacob, Mohd Rusdy and Velte, Clara Marika (2021) Students perception towards the implementation of asynchronous video lectures and video-based instructions in experimental fluid mechanics course. Evergreen, 8 (2). pp. 374-378. ISSN 2189-0420

Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Salleh, Mohd Shukor and Satish, Pujari and Kadirgama, Kumaran (2021) Importance Of Knowledge-Attitude-Practice To Enhance University Technology Transfer. Journal of Advanced Manufacturing Technology, 15 (2). pp. 71-82. ISSN 1985-3157

Yahaya, Saifudin Hafiz and Yaakub, Siti Farizah and Salleh, Mohd Shukor and Ahmad, Fauzi and Yaakob, Mohd Yuhazri and Akmal, Suriati (2021) Comparison study for double passive car suspension system through mathematical modelling and experimental work. International Journal of Advanced Technology and Engineering Exploration, 8 (82). pp. 1183-1192. ISSN 2394-7454

Yahaya, Siti Norbaya and Othman, Norfaridatul Akmaliah and Chipfunde, Dorothy (2021) The Determinants Influencing The Performance Of Women Entrepreneurs In Malaysia: A Conceptual Framework. Estudios de Economia Aplicada, 39 (4). pp. 1-13. ISSN 1133-3197

Yahya, Mohd Faid and Arshad, Mohd Rizal and Majid, Mad Helmi (2021) Responsive surging, heading and diving controls of autonomous underwater vehicle based on brute forcing and smoothing of controllers. Indian Journal Of Geo-Marine Sciences, 50 (11). pp. 884-889. ISSN 2582-6506

Yahya Farah, Nabil Salem and Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Azri, Maaspaliza and Mat Lazi, Jurifa and Abdullah, Qazwan and Aydoğdu, Ömer and Mat Isa, Zainuddin (2021) Investigation of the computational burden effects of self-tuning fuzzy logic speed controller of induction motor drives with different rules sizes. IEEE Access, 9. pp. 155443-155456. ISSN 2169-3536

Yahya Farah, Nabil Salem and Talib, Md Hairul Nizam and Mat Lazi, Jurifa and Ibrahim, Zulkifilie and Abdullah, Qazwan and Aydoğdu, Ömer and Isa, Zm (2021) Fuzzy Membership Functions Tuning For Speed Controller Of Induction Motor Drive: Performance Improvement. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (3). 1258 - 1270. ISSN 2502-4752

Yusof, Yusri and Latif, Kamran and Hatem, Noor and A. Kadir, Aini Zuhra and Abedlhafd, Mohammed M. (2021) Optimization And Execution Of Multiple Holes-Drilling Operations Based On STEP-NC. International Journal of Advanced Manufacturing Technology, 114 (7-8). pp. 2031-2043. ISSN 0268-3768

Yusof, Yusri and Latif, Kamran and Hatem, Noor and A. Kadir, Aini Zuhra and Mohammed, M.A (2021) A Novel Integrating Between Tool Path Optimization Using An ACO Algorithm And Interpreter For Open Architecture CNC System. Expert Systems with Applications, 178. pp. 1-19. ISSN 0957-4174

Zainal, Nurul Amira and Nazar, Roslinda and Naganthran, Kohilavani and Pop, Ioan (2021) MHD flow and heat transfer of hybrid nanofluid over a permeable moving surface in the presence of thermal radiation. International Journal of Numerical Methods for Heat and Fluid Flow, 31 (3). pp. 858-879. ISSN 0961-5539

Zainal, Nurul Amira and Nazar, Roslinda and Naganthran, Kohilavani and Pop, Ioan (2021) Stability analysis of unsteady hybrid nanofluid flow past a permeable stretching/shrinking cylinder. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 86 (1). pp. 64-75. ISSN 2289-7879

Zainordin, Ahmad Zaifazlin and Mohamed, Zamri and Ahmad, Fauzi (2021) The magnetorheological fluid: testing on automotive braking system. International Journal of Automotive and Mechanical Engineering, 18 (1). pp. 8577-8584. ISSN 2180-1606

Zainuddin, Farah Ayiesya and Abd Samad, Md Fahmi (2021) Comparison Of Crossover In Genetic Algorithm For Discrete-Time System Identification. International Review of Mechanical Engineering, 15 (2). pp. 59-66. ISSN 1970-8734

Zainuddin, Muhammad Noorazlan Shah and Mohd Hussin, Najihah and Ahmad Radzi, Syafeeza and Mohd Saad, Wira Hidayat and Mohd Noh, Zarina and Sulaiman, Noor Asyikin and Razak, M. S.J.A. (2021) A Framework For Chili Fruits Maturity Estimation Using Deep Convolutional Neural Network. Przeglad Elektrotechniczny, 97 (12). pp. 77-81. ISSN 0033-2097

Zakaria, Mohamad Shukri and Abd. Latif, Mohd Juzaila and Mohd Salleh, Nursyaira and Basri, Adi Azriff (2021) A computational study of a passive flow device in a mechanical heart valve for the anatomic aorta and the axisymmetric aorta. CFD Letters, 13 (4). pp. 69-79. ISSN 2180-1363

Zakaria, Nazri Huzaimi and Jumaidin, Ridhwan and Shaharuzaman, Mohd Adrinata and Mohamad Zin, Mohd Rody and Abdul Munir, Fudhail (2021) Mechanical and physical properties of thermoplastic corn starch. Jurnal Teknologi, 83 (5). pp. 119-127. ISSN 0127-9696

Zakaria, Zahriladha and Al-Ahnomi, Rammah Ali Hussien and Mohd Yussof, Zulkalnain and Alhegazi, Ammar and Abd Rahman, Norhanani and Alsariera, Hussein and Althuwayb, Ayman Abdulhadi (2021) Review of recent microwave planar resonator-based sensors: Techniques of complex permittivity extraction, applications, open challenges and future research directions. Sensors, 21 (7). pp. 1-38. ISSN 1424-8220

Zakaria, Zahriladha and Edward, Nurhasniza and Paramasivam, Lavanya and Mohd Bahar, Amyrul Azuan (2021) Investigation of microwave sensor and integrate with polydimethylsiloxane for medical imaging application. Indonesian Journal Of Electrical Engineering And Computer Science, 24 (2). pp. 949-956. ISSN 2502-4752

Zakaria, Zahriladha and Hussein Al-Hammadi, Yaqdhan Mahmood and Hanoosh, Hatem Oday Hatem and Al-Dhief, Fahad Taha and Saare, Murtaja Ali and Jawad, Mustafa Muhammad and Omran, Alaa Hamza and Abdulbari, Ali Abdulateef (2021) Smartphone’s off grid communication network by using Arduino microcontroller and microstrip antenna. TELKOMNIKA (Telecommunication Computing Electronics And Control), 19 (4). pp. 1100-1106. ISSN 1693-6930

Zakaria, Zahriladha and Mabrok, Mussa and Sutikno, Tole (2021) High efficiency Doherty power amplifier based on asymmetrical matching network. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (2). pp. 910-917. ISSN 2502-4752

Zakaria, Zahriladha and Meor Said, Maizatul Alice and Alahnomi, Rammah and Harry, Sucitra R. and Misran, Mohamad Harris (2021) Design Of Dual Band Meta-Material Resonator Sensor For Material Characterization. Applied Computational Electromagnetics Society Journal, 36 (4). pp. 473-478. ISSN 1054-4887

Zakaria, Zahriladha and Mussa Buharg, Mussa Mabrok and Masrukin, Yully Erwanti and Sutikno, Tole (2021) Dual-Band Bandpass Filter Based On Two U-Shaped Defected Microstrip Structure. Indonesian Journal of Electrical Engineering and Computer Science, 22 (2). pp. 301-310. ISSN 2502-4752

Zakaria, Zahriladha and Mussa Buharg, Mussa Mabrok and Sutikno, Tole (2021) High efficiency Doherty power amplifiers for modern wireless communication systems: A brief review. Indonesian Journal Of Electrical Engineering And Computer Science, 23 (3). pp. 1855-1860. ISSN 2502-4752

Zulfikar, Zulfikar and Jaafar, Anuar and Soin, Norhayati and Wan Muhamad Hatta, Sharifah Fatmadiana and Abu Talip, Mohamad Sofian (2021) Routing density analysis of area-efficient ring oscillator physically unclonable functions. Applied Sciences (Switzerland), 11 (20). pp. 1-15. ISSN 2076-3417

Zulkefli, Zamir Aimaduddin and Othman, Muhammad Nur and Putra, Azma and Mu, Luo and Abdul Jalil, Nawal Aswan and Raja Ahmad, Raja Mohd Kamil (2021) Experimental Investigation Of An Acoustic Metamaterial Barrier Design Composed Of A Square Prism Within A Hexagonal Recess. Asean Engineering Journal, 11 (3). pp. 57-70. ISSN 2586-9159

Book Chapter

Shkarupylo, Vadym V. and Blinov, Ihor V. and Chemeris, Alexander A. and Dusheba, Valentyna V. and Jamil Alsayaydeh, Jamil Abedalrahim (2021) On applicability of model checking technique in power systems and electric power industry. In: Studies in Systems, Decision and Control. Springer Science and Business Media Deutschland GmbH, pp. 3-21. ISBN 9783030876753

Thesis

Abd Aziz, Muhammad Syahril (2021) Development of thermal electric cooling air conditioner by evaporative cooling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahim, Noor Afiqah (2021) Modelling Of Leakage Current On Conductive Surface For Outdoor Insulators. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd. Rasid, Muhamad Firdauz (2021) Multi objective performances optimization of hybrid rotary ultrasonic assisted micro drilling on chemically strengthened glass. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Azziz, Eisy Humaira (2021) Knowledge-based performance measurement model for Malaysia Higher Education Institution. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Kadir, Hakim Naqiuddin (2021) Design and analysis a black box for used cooking oil filtration. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Manap, Muhamad Naim Fahmi (2021) Effect of zirconia and chromia on the mechanical and tribology properties of alumina cutting tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Raheem, Hayder Adil (2021) A model of information technology competencies towards high-tech firms performance through innovation capabilities and absorptive capacity. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahman, Farah Khalidah (2021) Design and analysis of capacitive power transfer system for low power applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahman, Mohd Hafizi (2021) Optimization of lightweight front lower control arm using aluminium cast for C-Segment passenger vehicle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu, Md Sahrom (2021) Association ruleset formulation for cyberattack attribution process in cyber threat intelligence using apriori algorithm. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Salim, Siti Aishah (2021) Design of circular polarized antenna with metasurface. Masters thesis, Universiti Teknikal Malaysia Melaka.

Achmad Bakri, Solichul Hadi (2021) IOT based model to enhance the potential of Indonesian batik entrepreneur. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Adebiyi, Opeyemi Olajide (2021) Factors influencing Malaysian green technology financial scheme and its effects on the business performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Nor Hafiza (2021) Pelaksanaan amalan organisasi pembelajaran terhadap prestasi sekolah. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Kamil, Muhammad Azhari (2021) Enhanced sentence extraction through neuro-fuzzy technique for text document summarization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmed, Yasir Hamad (2021) Cloud - based electronic human resource management mitigation model for healthcare organizations in Iraq. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Al-Attabi, Alaa Razzaq Khallawi (2021) Characterisation of dissolved decay products of transformer oil based on plastic optical fibre. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Al-Shaikhli, Taha Raad Khaleel (2021) Lightning characterization and mapping using microwave interferometer system. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Albadarneh, Mousa Jamal Salem (2021) Energy efficiency in academic buildings through optimization and operational strategies. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alblooshi, Halima Mohammed Murad Karam (2021) The relationship between quality system factors, satisfaction, monetary cost and continuance intention to use M-health. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alhmood, Ali Abdul-Hussian Hassan (2021) An improved energy-efficient clustering protocol to prolong the wireless sensor network lifetime. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ali Rashed Alyammahi, Maryam (2021) The impacts of macroeconomic risk factors on industrial stock returns in UAE and USA. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Almarri, Ghalib Abdulla (2021) A new human-centric model of airport smart security system to enhance the passenger experience. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alsariera, Hussein Salameh Mahmoud (2021) Design of broadband circularly polarised printed monopole antennas for indoor wireless communication systems. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Aminordin, Azmi (2021) Enhancement Of Static Code Analysis Malware Detection Framework For Android Category-Based Application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Arifin, Khairil Anwar (2021) Investigation of energy management practice and achievement in UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azahari, Norzailan (2021) Investigation on the sound transmission loss of door sealing system using hybrid FE-SEA method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azman, Amierul Syazrul Azril (2021) Development of a wireless mesh network routing algorithm for oil and gas pipeline networks. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Aini Khairani (2021) A multi-criteria hybrid recommender system for elderly intervention plans toward successful ageing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Cha, Chan Lam (2021) Corrosion of palladium coated copper wire bonds under high temperature storage reliability test. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chai, Mau Shern (2021) Parameter tuning of sliding mode controller using multi-objective particle swarm optimization in electro-hydraulic actuator system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Che Othaman, Siti Syahirah (2021) Mechanical characterisation of hybrid GNPS and functionalised BN as a thermal interface material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chen, Wei Ping (2021) Design and development of thermoelectric powered wireless sensor network using soft start approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chin, Kwang Yhee (2021) Experimental study of yaw angle effect on aerodynamic performance of road vehicle with rear spoiler. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chinnappan, Ushananthini (2021) Productivity improvement using overall equipment efficiency in semiconductor industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chong, Jia Yuik (2021) Development of lean manufacturing implementation framework in machinery and equipment of small and medium enterprises. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dhahir, Mohammed Idrees Dhahir (2021) Utilization of AHP for selecting conceptual design of portable oil spill skimmer. Masters thesis, Universiti Teknikal Malaysia Melaka.

El Tawil, Naji Ammar Mansour (2021) Optimal allocation and sizing of capacitor bank and distributed generation using particle swarm optimization. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Farhan, Irfan Alias (2021) A Simulation Study On Temperature Non-Uniformity Of Photovoltaic Thermal Using Computational Fluid Dynamics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gan, Chin Ket (2021) Prediction of tool wear and surface roughness of waspaloy by using Artificial Neural Network (ANN). Masters thesis, Universiti Teknikal Malaysia Melaka.

Haji Maharof, Madihah (2021) A state observer-based tracking controller for suppression of input disturbance in machine tools application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hamdan, Nur Salsabilah (2021) The mediating effect of patient satisfaction between health clinic service quality and patient loyalty. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hameed, Asaad Shakir (2021) An enhanced metaheuristic approach to solve quadratic assignment problem using hybrid technique. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hanafi (2021) Recommender system using deep learning and matrix factorization. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hanif, Haziq Haiqal (2021) Optimization of fan load via core clocking of a triple fan GPU system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Harhara, Sohaib Mohammed Nasser (2021) The Implementation of Analytic Hierarchy Process To Determine the Optimal FDM Process Parameters. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hasan, Khairul Kamarudin (2021) Design of a self-tuning wireless power transfer system for low power application using capacitive approach. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hasbulah, Muhammad Haziq (2021) Implementation of EEG controlled technology to modular self-reconfigurable robot with multiple configurations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Hasmaini (2021) Development of self-assessment MOOC model for language course to support students’ learning performance. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hermanto, Tino (2021) Effect Of Low Frequency Excitation Location For Crack Detection In Aluminium Plate Using Nonlinear Vibro-Acoustic Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Husin, Mohd Amirhafizan (2021) Development Of Kenaf Woven Fabric Reinforced Epoxy And Polypropylene Composite With Different Stitching Pattern. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Husin, Mohd Amirhafizan (2021) Optimization Of Ammonia Release Model In A Fluidized Bed Granulation System Using RSM And PSO. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hussein, Maytham Falih (2021) Modernization factors for creating corruption awareness through social media and culture. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ibnu Mustaffa, Mukhzani (2021) Development Of Fuel Cell And Solar Prototype For Melaka River Cruise Boat. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Mohd Shahrom (2021) Stability analysis of cone-cylinder shell structures. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Jaafar, Mohd Fairuz (2021) Optimization of customized drill reamer geometrical features for aerospace composite panel. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Jopri, Mohd Hatta (2021) Harmonic distortion analysis in power quality signal using time-frequency distribution. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Karim, Khairu Ilwani (2021) Swelling and thermal effects on mechanical properties of NR/EPDM filled graphene nanoplatelets for engine mounting. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khsroo, Ibrahim T Nather (2021) Electronic commerce adoption model based on moderating role of trust and organization culture in Iraq. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Kunyahamu, Siti Nur Syazwani (2021) Performance analysis of pre-sliding motion using sliding mode controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lau, Saijod Tse Way (2021) Energy Absorption Performance Of Natural Fibres Reinforced Epoxy Composite Tubes Under Axial And Oblique Loading. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Leong, Pui Huang (2021) Development of novel conversational agent using retrieval-based model and deep learning. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Liew, Siaw Hong (2021) Distraction descriptor for brainprint authentication modelling using probability-based incremental fuzzy-rough nearest neighbour technique. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Lim, Kee Keong (2021) Implementation of performance monitoring for bag filter dust collecctor machine at animal feedmill plant. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lum, Chee Choong (2021) Failure Mode and Effects Analysis With Analytical Hierarchy Process For Selecting The Best Design of VLM (Vertical Lift Module) Strategy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahboob Ali, Muhammad Razif (2021) Development and analysis of lab scaled machine for 3D concrete printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahidan, Fairuz Mardhiah (2021) Instability and sensitivity to imperfection of conical shell subjected to axial compression. Masters thesis, Universiti Teknikal Malaysia Melaka.

Majid, Siti Najatul Aishah (2021) Experimental investigation of 3D printed component with integrated pressing tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Manickavelu, Gogulan P. (2021) Tensile properties and weld dimension of dissimilar material joint between AA5083 and AA6061 with coldarc gas metal arc welding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat, Siti Asiyah (2021) Performance of carbide insert in turning of titanium alloy under carbon dioxide cryogenic cooling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Alias, Muhammad Aizat (2021) Lubrication and tribological properties of palm oil mixed with organo zinc compound. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Jani, Noraniza (2021) A framework of social networking sites in measuring online customer engagement of best practice for small medium enterprises in Malaysia. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Md Nasir, Nur Syuhada (2021) Parameters optimization of micro drilling process for CFRP using two flute solid carbide drill bit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Hayder Salah (2021) Modelling Of Malaysian Reference Networks For Photovoltaic And Battery Energy Storage Systems Integration Studies. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Farhan Han, Syaza Najwa (2021) Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Idris, Siti Naimah Solehah (2021) Design optimization of spring loaded knee brace for knee arthritis using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Jmmani, Nur Aisyah Nabilah (2021) Simulation of wire and arc additive manufacturing of 308L stainless steel with coldarc gas metal arc welding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Mushar, Siti Hajar (2021) Analysis of tree volume equations for Cherul Forest Reserve, Terengganu. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rashid, Mohd Fairuz (2021) Machining performance of 22MnB5 Boron steel cutting tool with Al 6061 Aluminium Alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sanusi, Nursyahirah (2021) Design of ultra wideband isolation of RF switch for microwave imaging in medical application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yunos, Afiqah (2021) Interfacial adhesion between silver ink and thermoplastic polyurethane and electromechanical reliability of flexible printed circuit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yusof, Sitinor Wardatulaina (2021) The moderation of innovation on the relationship between market orientation and firm performance. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mosa, Ali Ibrahim (2021) Modelling The Acoustic Performance Of Inhomogeneous Micro-Perforated Panel Absorber. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Muazzam Zainudin, Muhammad Ikhwan (2021) Investigation of factors affecting flame stabilization in meso-scale combustor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nandagopal, Vanisha Ashweeni (2021) Fluid dynamic simulation for diffusion solder die bond. Masters thesis, Universiti Teknikal Malaysia Melaka.

Narayanan, Thinakaran (2021) Physical and mechanical properties of non-treated and NaOH-treated recycled polypropylene filled dried banana leaves composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nazan, Muhammad Afdhal (2021) Investigation Of Warping Deformation By Starch Adhesion In Fused Deposition Modelling 3D Printer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Lim Huat (2021) Design and development of 3D printer filament extruder. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Lin Feng (2021) Characterisation of kenaf/pineapple leaf fibre reinforced composite-metal laminates with enhanced mechanical properties. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Nor Azlan, Nor Asmaa Alyaa (2021) Augmentation of basic-line-search and quick-simplex-method algorithms to enhance linear programming computational performance. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Pang, Kok An (2021) Cryptanalysis of fruit-80, craft and cham lightweight symmetric-key cryptographic primitives. Masters thesis, Universiti Teknikal Malaysia Melaka.

Panirchelvam, Dinesh (2021) Factors affecting customer satisfaction and retention in retail store. Masters thesis, Universiti Teknikal Malaysia Melaka.

Putra, Mohd Hasbullah (2021) Performance evaluation on quantized weight for convolutional neural network based object detection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rahiddin, Rahillda Nadhirah Norizzaty (2021) Statistical texture representation for wood defect image classification using local binary pattern variants. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramli, Mohamad Raziff (2021) Improved Bat Algorithm for faster convergence in solving optimisation problem. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Razak, Muhammad Shahmi (2021) The effect of cryogenic carbon dioxide cooling on surface integrity of titanium alloy in turning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Revee, Sharveen (2021) Elimination of liquid nitrogen (LN2) rain on test handler in semiconductor industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rokhim, Mochamad Iqbal (2021) Development of validated finite element model for reinforced thin-walled I-beam using steel patch method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosnazri, Muhammad Hamizan (2021) The impact of HHO enrichment in single-cylinder diesel engine via simulation environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saad, Hartini (2021) A study of highly conductive pattern by manual printing of graphene nanoparticles with different width size. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saad, Muhammad Majdi (2021) Reconfigurable slots antenna based on mechanical movement for smart communication system. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Sachit, Fadhil Abdulameer (2021) Performance analysis of water based photovoltaic thermal collector with serpen-direct absorber. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Saleh, Wail Ali Ali (2021) Implementation of nearest level control method for single-phase transistor-clamped H-bridge multilevel inverter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salehuddin, Syaidatul Syakirah (2021) The Application Of Strategic Cooling Technique In Bobbin Friction Stir Welding To Improve Weld Strength. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salim, Fadzilah (2021) An S-Curve Efficient Frontier For Evaluation Model. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Salima, Wongani Clement Kizito (2021) Product redesign by topology optimization for additive manufacturing process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salimen, Nurfarhana (2021) A simulation study of photovoltaic system integrated with phase change material using ANSYS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salleh, Zulhisyam (2021) Simplified fuzzy logic controller to improve disturbance rejection with space vector in induction motor drives. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Shaarani, Ahmad Shaarizan (2021) Design and development of flipped learning engagement model to enhance student achievement. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Shaffiei, Zatul Alwani (2021) Tasks Distribution In Driver Scheduling Using Dynamic Set Of Bandwidth In Harmony Search Algorithm With 2-Opt. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Shaharudin, Nur Amalina (2021) Autonomous Collision Avoidance System Using Combined Four-Wheel Steering And Direct Yaw-Moment Control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shaikh Ahmad Hilmy, Shaikh Tahfiq Falahin (2021) Study The Temperature Distribution Of Solar Powered Drying Chamber Using CFD Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shamsul Baharin, Shamsul Ammar (2021) Temporal characteristics of microwave radiations emitted during stepped leaders process of negative ground flashes. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sharif, Mohd Luqman Hakim (2021) Functional electrospun nanofibres for heat dissipation applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sharuddin, Muhammad Syadza (2021) Energy harvesting system based on road pavement incorporated with thermoelectric generator system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suarin, Mohd Azizan (2021) Biomechanical study of total disc replacement prosthesis on spinal facet joint using finite element method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Subramaniam, Kathiravan (2021) Investigation of mechanical performance of woven kenaf/glass hybrid composite metal laminate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sundi, Syahrul Azwan (2021) Machining Parameters And Tool Geometry Optimization For Trimming Composite Laminates Using Response Surface Methodology. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Suzaim, Farah Hanum (2021) Influence of sol and deposition method in developing TiO2 brookite coatings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Talib, Mohammed Saad (2021) Centre based evolving clustering framework with extended mobility features for vehicular ad-hoc networks. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tan, Cheerrein Cher Ring (2021) Smart control sampling system for metrology tool in semiconductor production line. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Ming Hui (2021) Improved testing characterization on radio frequency connector in calibration system. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tay, Choon Kiat (2021) Automatic Malaysia license plate recognition using deep learning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teoh, Woei Sheng (2021) Automation Of The Manual Task At Strip Test Process In Semiconductor Manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ting, Kung Hieng (2021) Ultrasonic Assisted Fused Deposition Modeling For Acrylonitrile Butadiene Styrene Waste Recycling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tioh, Keat Soon (2021) Feature based face detection for unconstrained images. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tuan Nawi, Tuan Muhammad Idzuddin (2021) Influence of water ageing on the fatigue behaviour of rubberwood reinforced recycled polypropylene. Masters thesis, Universiti Teknikal Malaysia Melaka.

Vaheed, Mohamed Maharoof (2021) ICT procurement : pre-award ambiguities in requirement analysis and post-award ICT projects effects in government sector. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Wan Nor Azman, Wan Ainul Syafika (2021) Product Design Preferences Using Facial Features And Kansei Engineering. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Yaacob, Wan Nur Hidayah (2021) The profiling of car design product using Bezier curve for customer product design preferences. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Jia Yi (2021) Copper wire bond improvement on aluminum interface for optimum high emperature storage reliability performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Kah Yan (2021) Surfaces (Technology) Surface preparation Coating processes Tungsten carbide-cobalt alloys. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yaakob, Subhy Asyir (2021) Evaluate the filter lifetime extension and physical condition at rinses module in wet process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yahya, Fatin Aliah (2021) Design and evaluation of mobile educational game using m-learning approach for secondary school students. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yap, Ching Yee (2021) The feasibility of quarry dust powder suspension for surface modification of tungsten carbide cobalt. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yap, Jim Hui (2021) Design of a high efficiency multiple-inputs single-output switch capacitor-based DC-DC converter for energy harvesting system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yunus, Yusof (2021) Multi-finger localization feedback through vibrotactile sensory substitution system for prosthetic hand. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zaid, Zulhilmi (2021) Development of a real-time in car physiological acquisition system for monitoring attention drifting phenomenon. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal Abidin, Nor Afirdaus (2021) Integrated telehomecare system framework for seamless access to health records. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Zobilah, Abdullah Mohammed Saghir (2021) Design of absorptive filter integrated switch using lossy resonators at 2.4 GHz ISM band. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Zulkalnain, Mohd Khairi (2021) A 0.6V improved PSRR bandgap reference for power management system in RF energy harvesting applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkifl, Nor Syazana Adilah (2021) Graphene nanoplatelets modified chemlok adhesive system for natural rubber-aluminium bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.

This list was generated on Fri Mar 29 14:43:15 2024 +08.