Browse By Repository:

 
 
 
   

Items where Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: | ' | - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 1592.

Abal Abas, Zuraida (2013) Extended Advancing Front Technique for the Initial Triangular Mesh Construction on a Single Coil for Radiative Heat Transfer. Arabian Journal for Science and Engineering. pp. 1-18. ISSN 13198025

Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Zanariah, Jano (2013) A Review of Concentrating Solar Power (CSP) In Malaysian Environment. International Journal of Engineering and Advanced Technology (IJEAT), 3 (2). pp. 378-382. ISSN 2249 – 8958

Aidy Akmal , Sabtu (2013) Trades subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Nur Amira , Zulkarnain (2013) A study on botteleneck operations to optimize manpower planning for productivity improvement at 2HC door lining assembly line via MODAPTS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Perumal, Puvanasvaran (2013) People Development System for Lean Process Management Implementation. Penerbit UTeM, UTeM. ISBN 9789670257273

Raudhah , Zainal Rashid (2013) Thermal insulation particle board made with sugarcane bagasse fiber, kenaf core powder reinforced with polypropylene. Project Report. UTeM, Melaka. (Submitted)

Wan Idham , Wan Omar (2013) Design and development of ultrasonic reverse sensor. Project Report. UTeM. (Submitted)

Yuvarajan , Karathihayan (2013) Modelling of palm fibre polypropylene composite for randomly distributed fibre reinforcement. Project Report. UTeM, Melaka. (Submitted)

'

'Aishah, Hassan (2013) Fabrication Of Activated Carbon Filled Epoxidized Natural Rubber Composite Via Solvent Casting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

-

-, Ali Ahmad Milad and Muhamad Noh, ZulAzri and Shibghatullah, Abdul Samad and -, Mustafa Almahdi Algaet (2013) Design a Novel Reverse Direction Transmission Using Piggyback and Piggyback With Block ACK to Improving the Performance of MAC Layer Based on Very High Speed Wireless LANs. 2013 IEEE Conference on Information and Communication Technologies (ICT 2013). pp. 1-4. ISSN 978-1-4673-5758-6

-, Mustafa Almahdi Algaet and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and -, Ali Ahmad Milad (2013) Provisioning Quality of Service of Wireless Telemedicine for E-health Services. Proceedings of 2013 IEEE Conference on Information and Communication Technologies (ICT 2013). pp. 1-4. ISSN 978-1-4673-5758-6

A

A. P., Puvanasvaran (2013) CONSIDERATION OF DEMAND RATE IN OVERALL EQUIPMENT EFFECTIVENESS (OEE) ON EQUIPMENT WITH CONSTANT PROCESS TIME. Journal of industrial engineering and management, 6 (2). pp. 507-525. ISSN 2013-0953

A. P., Puvanasvaran (2013) ORGANIZATIONAL VERTICAL AND VIRTUAL INTEGRATION MODEL IN IMPLEMENTING LEAN MANUFACTURING TRANSFORMATION. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (IC-TMT) 2012 PARTICIPATION, 1 (1). pp. 85-99. ISSN IC-TMT-2012

A. P., Puvanasvaran (2013) WORKSHOP STORE ROOM IMPROVEMENT WITH 5S: A CASE STUDY. Advanced Manufacturing Technology, 7 (1). pp. 45-62. ISSN 1985-3157

A. P., Puvanasvaran and C. Z. , Mei and V. A. , Alagendran (2013) Overall Equipment Efficiency Improvement Using Time Study In An Aerospace Industry. Procedia Engineering 00 (2013) 000–000. pp. 1-9. ISSN 00 (2013) 000–000

A. P., Puvanasvaran and T.S.N., Stephanie and N., Norazlin (2013) Study On Streamlined Process Improvement By Using Value Stream Mapping In Automotive Seating Company: A Case Study. Journal of Advanced Manufacturing Technology (JAMT) , 07 (2). pp. 57-67. ISSN 1985-3157

A.P., Puvanasvaran and Teoh, Yong Siang and Tay, Choo Chuan (2013) Consideration of demand rate in Overall Equipment Effectiveness (OEE) on equipment with constant process time. Journal of Industrial Engineering and Management, 6 (2). pp. 507-524. ISSN 2013-8423

AB WAHAB, YUSENI and Basari, A.S.H (2013) Building Maintenance Management Preliminary Finding of a Case Study in Icym. Middle-East Journal of Science Research. pp. 1260-1268. ISSN 1990-9233

AB.AZIZ, NORAZLINA and Abdul Majid, Izaidin (2013) ANALYZING MARLET STARTEGY. analyzing. pp. 9-19. ISSN 133455

ABD RAZAK , JEEFFERIE and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of polypropylene/multiwalled carbon nanotube nanocomposites via direct melt compounding. Journal of Elastomers & Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

ABDUL HAMID, RAHIMAH and YAAKOB, MOHD YUHAZRI and HASOLOAN , HAERY IAN PIETER (2013) Design and Analysis of a New Natural Illumination Device through Lumen Method Approach. Applied Mechanics and Materials , 315 (2013). pp. 715-719. ISSN 1662-7482

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2013) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. International Journal of Mining, Metallurgy and Mechanical Engineering (IJMMME), 1 (1). pp. 75-77. ISSN 2320 –4060

ABDULLAH, Mohd Azman and Mansor, Muhd Ridzuan and Tamaldin, Noreffendy and Thanaraj, Krishnan (2013) Development of Formula Varsity Race Car Chassis. IOP Conf. Series: Materials Science and Engineering, 50 (012001). pp. 1-11. ISSN 1757-899X

ABDULLAH, Mohd Azman and Sulaiman, Nurfarahin and Mat Idera, Ikhwan Hakim and Mohd Razi, Mohd Zakwan and Ngadiman, Mad Nasir (2013) Design and Fabrication of Vehicle All-Wheel-Nuts Remover. International Journal of Computer Science and Electronics Engineering (IJCSEE). pp. 381-384. ISSN 2320-401X

ABDULLAH, Mohd Azman and Tamaldin, Noreffendy and Rusnandi, Herdy and Manoharan, Tayalan and Samsir, Muhammad Afiq (2013) Development and Modification of a Single Overhead Camshaft 4-Valve 4-Stroke 135 cc Formula Varsity Race Car Engine. IOP SCIENCE IOP Conf.Series:MaterialsScienceandEngineering, 50. pp. 1-7. ISSN 1757-899X

ABDULLAH, Mohd Azman and tamaldin, noreffendy and Abdul Aziz, Muhammad Khatib and Munawar, Ahmad Fadhli and Ngadiman, Mad Nasir (2013) Increasing the Tire Life Span by Means of Water Cooling. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME), 1 (1). pp. 78-80. ISSN 2320–4060

ABDULLAH, Mohd Azman and Ibrahim, Azhar and Hudha, Khisbullah (2013) Multibody Dynamics Models of Railway Vehicle Using Adams/Rail. Applied Mechanics and Materials, 393. p. 644. ISSN 1662-7482

ABDULLAH, Mohd Azman and Ibrahim, Azhar and MICHITSUJI, Yohei and NAGAI, Masao (2013) ACTIVE CONTROL OF HIGH-SPEED RAILWAY VEHICLE PANTOGRAPH CONSIDERING VERTICAL BODY VIBRATION. INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (IJMET), 4 (6). pp. 263-274. ISSN 0976 – 6340

ABDULLAH, Mohd Azman and Zainordin, Ahmad Zaifazlin and Hudha, Khisbullah (2013) Validation and Experimental Evaluation of Magnetorheological Brake-by-Wire System. Journal of Engineering and Technology, 4. pp. 109-122. ISSN 2180-3811

AL-YAKOOB, khalil (2013) Applying the sustainable development orientations in a municipality programme in South-West of France. In: ENCON2013, 6th Engineering Conference, "Energy and Environment", 02-04 July 2013, UNIMAS-Kuching-Sarawak-MY. (Submitted)

AL-YAKOOB, khalil and Khoo, Mei Sui Linda (2013) MODELLING of HEAT and MASS TRANSFER in the EVAPORATION of a BINARY MIXTURE in a FALLING FILM APPARATUS. World Applied Sciences Journal, 21 (Specia). pp. 47-52. ISSN 1818-4952

AZIZ, NORAZLINA and ABDUL MAJID, IZAIDIN and MD NORDIN, SHAHRINA and KAMALUDIN, HASFARIZAL and LAI, FONG WOON (2013) Analyzing Market Exploitation and Market Exploration Dyad for Marketing Strategy Implementation Effectiveness in Malaysian Fertilizer Industry: A Conceptual Paper. American Journal of Economic. pp. 119-126. ISSN DOI: 10.5923/j.economics.20130302.10

Ab Ghani, Mohd Ruddin and Affandi, Rosnani and Gan, Chin Kim (2013) Performance Comparison for Parabolic Dish Concentrating Solar Power in High Level DNI Locations with George Town, Malaysia. In: 3rd International Conference and Exhibition os Sustainable Energy and Advanced Materials (ISE-SEAM 2013), 30-31 October, 2013, Melaka, Malaysia.

Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff and Raman, Siti Hajar and Wan Jusoh, Wan Nor Shela Ezwane and Baharudin, Zikri Abadi (2013) Development of a novel fault management in distribution system using distribution automation system in conjunction with GSM communication. International Journal of Smart Grid and Clean Energy, 2 (3). 229 -335. ISSN 2315-4462

Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff and Wan Jusoh, Wan Nor Shela Ezwane and Raman, Siti Hajar (2013) Remote Terminal Unit (RTU) Hardware Design and Implementation Efficient in Different Application. In: 2013 IEEE 7th INTERNATIONAL POWER ENGINEERING AND OPTIMIZATION CONFERENCE, 3-4 Jun 2013, Bayview Hotel Langkawi.

Ab Ghani, Mohd Ruddin and Raman, Siti Hajar and Wan Jusoh, Wan Nor Shela Ezwane and Mat Hanafiah, Mohd Ariff and Baharudin, Zikri Abadi (2013) A Low Cost Wireless Data Acquisition System for Distribution Automation System. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ISE-SEAM 2013), 30-31 October, 2013, Melaka, Malaysia.

Ab Ghani, Mohd Ruddin and Wan Hassan, Wan Ahmas Redhauddin and Mat Hanafiah, Mohd Ariff and Raman, Siti Hajar (2013) Development of a New Modeling Circuit for the Remote Terminal Unit (RTU) with GSM Communication. In: 2013 IEEE Conference on Clean Energy and Technology, 18-20 November 2013, Langkawi, Malaysia.

Ab Ghani, Mohd Ruddin and Wan Jusoh, Wan Nor Shela Ezwane and Mat Hanafiah, Mohd Ariff and Raman, Siti Hajar and Jano, Zanariah (2013) A Review of Communication Protocols for Intelligent Remote Terminal Unit Development. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 11 (4). pp. 819-826. ISSN 1693-6930

Ab Ghani, Mohd Ruddin and Wan Jusoh, Wan Nor Shela Ezwane and Raman, Siti Hajar and Mat Hanafiah, Mohd Ariff and Wan Hassan, Wan Ahmas Redhauddin (2013) Remote Terminal Unit Developed for Distribution Automation System (DAS) using MPLAB Software. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013), 30 - 31 October, 2013, Melaka, Malaysia.

Ab Ghani, Sharin and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Ahmad Khiar, Mohd Shahril and Sutan Chairul, Imran (2013) Condition Monitoring of Distribution Transformer's Mechanical Parts Using Sweep Frequency Response Analysis (SFRA). In: INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Ab Ghani, Sharin and Mohd Hambali, Roslan and Yusuf Lada, Musa and Ahmad Khiar, Mohd Shahril (2013) Understanding SFRA Results using Transformer Model with Simulated Faults. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

Ab Rahman, Mohd Nizam and Wan Mahmood, Wan Hasrulnizzam and Md Deros, Baba (2013) Peningkatan Produktiviti Syarikat Pembuatan Melalui Penambahbaikan Fleksibiliti dan Kecekapan Masa : Satu Kajian Simulasi. Jurnal Teknologi, UTM, 62 (1). pp. 53-61. ISSN 0127-9696

Ab Rahman, Mohd Fauzi and Kok, Swee Leong (2013) Comparison Study between Four Poles and Two Poles Magnets Structure in the Hybrid Vibration Energy Harvester. In: SCOReD 2013, 16 - 17 December 2013, Putrajaya.

Ab Rahman, Mohd Fauzi and Kok, Swee Leong and Mat Ali, Noraini and Rostam Affendi, Hamzah (2013) Hybrid Vibration Energy Harvester Based On Piezoelectric and Electromagnetic Transduction Mechanism. In: 2013 IEEE Conference on Clean Energy and Technology, 18 - 20 November 2013, Bayview Hotel, Langkawi, Malaysia. (Submitted)

Ab Rahman, Mohd Fauzi and Kok, Swee Leong and Ruslan, Eliyana and Dahalan, Abdul Halim and Salam, Saifullah (2013) Comparison Study between Four Poles and Two Poles Magnets Structure in the Hybrid Vibration Energy Harvester. In: 2013 IEEE Student Conference on Research & Development(SCOReD), 16 - 17 December 2013, Palm Garden Hotel, Putrajaya, Malaysia. (Submitted)

Ab Rashid, Mohd Zamzuri and Ahmad Izzuddin, Tarmizi and Abas, Norafizah and Hasim, Norhaslinda and Abd Azis, Fadilah and Mohd Aras, Mohd Shahrieel (2013) Control of Automatic Food Drive-Through System using Programmable Logic Controller (PLC). International Journal of u- and e- Service, Science and Technology, 6 (4). pp. 41-50. ISSN 2005-4246

Ab Wahab, Yuseni and Basari, A. S. H. (2013) Analysis of Down Time and Reliability Estimation in Hostel Building Maintenance- a Case Study. Middle-East Journal of Science Research. pp. 1213-1219. ISSN 1990-9233

Ab Wahab, Yuseni and Basari, A.S.H and Burairah, Hussin (2013) BUILDING MAINTENANCE MANAGEMENT: PRELIMINARY FINDING OF A CASE STUDY IN KUIM. In: National Case Study Conference (NCSC), 20-22 June 2013 , Kota Kinabalu, Sabah.

Ab. Rahman , Mahmood and Baharudin , A.B. and Adi , S. and Hussein, N.I.S. and Isa , Halim and Elfi , R.I.F. (2013) Dimensional Deviation Affected by Cutting Parameters and Machine Tool Rigidity in Dry Turning of S45C Steel. Applied Mechanics and Materials, 315. pp. 749-754. ISSN 1660-9336

Abal Abas, Zuraida and Salleh, Shaharuddin and Rahman, Ahmad Fadzli Nizam and Basiron, Halizah and Hasan Basari, Abd Samad and Hassim, Nurulhalim (2013) Improvement of Element Creation Procedure for Generating Initial Triangular Unstructured Mesh for Radiative Heat Transfer Modelling. International Review on Modelling and Simulations, 6 (5). pp. 1649-1656. ISSN 1974-9821

Abal Abas, Zuraida (2013) Extended Advancing Front Technique for the Initial Triangular Mesh Construction on a Single Coil for Radiative Heat Transfer. Arabian Journal for Science and Engineering , 38. 2245 -2262. ISSN 1319-8025

Abas, Norafizah and Ab. Rashid , Mohd Zamzuri and Ibrahim, Zulkifilie and Samsudin, Nur hazahsha (2013) Design of Auto-stabilization Control Technique for a Quadrotor System. Design of Auto-stabilization Control Technique for a Quadrotor System, Vols. . pp. 559-564. ISSN AMM.313-314.559

Abas, Norafizah and Ibrahim, Zulkifilie and Rahim, Nor Hidayah and M. Kassim, Anuar (2013) Modeling and System Identification using Extended Kalman Filter for a Quadrotor System. Modeling and System Identification using Extended Kalman Filter for a. pp. 976-981. ISSN AMM.313-314.976

Abbdul Faiz, Anuar (2013) Effect Of Injection Machine Parameters On The Warpage Of Dumbbell Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Latif, M.J. and Ismail, N.R.A. and Ramlan, R. and Mahmud, J. and Abdul Kadir, M.R. (2013) Sensitivity Study of Surface Curvature in Characterisation Of Cartilage Mechanical Properties. Applied Mechanics and Materials, 393. pp. 941-946. ISSN 1660-9336

Abd Latif, M.J. and Hashim, N.H. and ramlan, roszaidi and Mahmud, J. and Jumahat, A. and Abdul Kadir, M.R. (2013) The Effects of Surface Curvature on Cartilage Behaviour in Indentation Test: A Finite Element Study. Procedia Engineering . pp. 109-115. ISSN 1877-7058

Abd Manaf, Mohd Edeerozey (2013) Incorporation of low-mass compound to alter the orientation birefringence in cellulose acetate propionate. Optical Materials, 35. pp. 1443-1448. ISSN 0925-3467

Abd Manaf, Mohd Edeerozey (2013) Optical Properties of Cellulose Esters and Applications to Optical Functional Films. In: Pulp production and processing: From papermaking to high-tech products. Smithers Rapra Technology Ltd, United Kingdom, pp. 391-411. ISBN 978-1-84735-633-8

Abd Manaf, Mohd Edeerozey (2013) Optical anisotropy in solution-cast film of cellulose triacetate. Cellulose, 20. pp. 83-96. ISSN 1572-882X

Abd Manap, Nurulfajar and Soraghan, John J. and Petropoulakis, Lykorgous (2013) Multi-Level View Synthesis (MLVS) based on Depth Image Layer Separation (DILS) algorithm for multi-camera view system. Signal and Image Processing Applications (ICSIPA), 2013 IEEE International Conference on . pp. 71-76. ISSN 978-1-4799-0267-5

Abd Manap, Nurulfajar and Soraghan, John J. and Petropoulakis, Lykourgos (2013) Depth Image Layers Separation (DILS) algorithm of image view synthesis based on stereo vision. Signal and Image Processing Applications (ICSIPA), 2013 IEEE International Conference on . pp. 61-66. ISSN 978-1-4799-0267-5

Abd Rahman, Ammar and SUBRAMONIAN, SIVARAO and Minhat, Mohamad and Abd. Rahman, Md. Nizam and Salleh, Mohd Rizal (2013) Manufacturing Process Volume 1. Penerbit Universiti UTeM.

Abd Samad, Md Fahmi and Hishamuddin, Jamaluddin and Robiah, Ahmad and Mohd Shafiek, Yaacob and Abul K. M., Azad (2013) Effect of Penalty Function Parameter in Objective Function of System Identification. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 940-954. ISSN 2180-1606

Abdelrafe, E. and Hussin, B. (2013) Managing Software Project Risks (Implementation Phase) With Proposed Regression Analysis Techniques. International Journal On Information Technology (I.R.E.I.T) , Vol.1 (5). pp. 278-312. ISSN 2281-2911 (Submitted)

Abdelrafe , Elzamly and Burairah, Hussin (2013) Managing Software Project Risks (Design Phase) with Proposed Fuzzy Regression Analysis Techniques With Fuzzy Concepts. International Review On Computers And Software (I.RE.COS), Vol. 8 (N. 11). pp. 2601-2613. ISSN 1828-6003 (Submitted)

Abdollah, Mohd Fadzli bin (2013) Preliminary Design of Side Door Impact Beam for Passenger Cars using Aluminium Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (1). pp. 11-18. ISSN 2180-1053

Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Frictional Behavior of Bearing Material Under Gas Lubricated Conditions. Procedia Engineering , 68. pp. 688-693. ISSN 1877-7058

Abdul Basit , Kamaludin (2013) Pembentukan mendapan bahan bakar diesel dan bio-diesel pada suhu permukaan melebihi suhu Kadar Pengewapan Maksimum (MEP). Project Report. UTeM, Melaka. (Submitted)

Abdul Hadi, M. H. and Ahmad, B. H. and Shairi, N. A. and Wong , Peng Wen (2013) Effect of a Discrete PIN Diode on Defected Ground Structure. In: 2013 IEEE SYMPOSIUM ON WIRELESS AND APPLICATIONS (ISWTA 2013), 22-25 SEPTEMBER 2013, KUCHING, SARAWAK.

Abdul Hafiz , Hashim (2013) To determine alkaline catalyst for the jatropha oil biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Abdul Jabbar , Zamri (2013) Smart day and night lighting system using solar light ray reflection and deflection. Project Report. UTeM, Melaka. (Submitted)

Abdul Khalid, Fararishah and Gilbert, David and Huq, Afreen (2013) Measuring Business Incubation Performance in the ICT Industry in Malaysia. In: Global Business and Social Research, 25-26 June 2013, Dynasty Hotel, Kuala Lumpur.

Abdul Khalid, Fararishah and Gilbert, David and Huq, Afreen and Ebrahim, Zuhriah (2013) The role of marketing and promotion management in assisting ICT incubatees in Malaysia. In: Asia Pacific Marketing and Management Conference 2013, 20-22 November 2013, Hilton Hotel, Kuching, Sarawak. (Submitted)

Abdul Latiff, Anas and Abdul Rahim, Hazli Rafis and Jaafar, Anuar and Gannapathy, Vigneswara Rao and Zainuddin, Muhammad Noorazlan Shah (2013) Design High-Q Square Resonator Add-Drop Filter for CWDM Application. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 364-367. ISSN 1991-8178

Abdul Latiff, Anas and Zakaria, Zahriladha and Jaafar, Anuar and Abdul Rahim, Hazli Rafis and Gannapathy, Vigneswara Rao (2013) COMPARATIVE STUDY ON SINGLE- AND DOUBLE-PASS CONFIGURATIONS FOR SERIAL DUAL-STAGE HIGH CONCENTRATION EDFA. International Journal of Research in Engineering and Technology, 02 (12). pp. 139-143. ISSN 2321-7308

Abdul Majid, Izaidin and Ngadiman, Yunos and Hussin , Burairah (2013) Exploring The Overall Equipment Effectiveness (OEE) In An Industrial Manufacturing Plant. In: The 2nd International Conference on Global Optimization and Its Applications (ICoGOIA2013), 28-29 August 2013, Legacy Melaka Hotel, Melaka..

Abdul Manaf, Muhammad Zaidan and Nik Mohamed, Nik Abdullah and Zakaria, Mohamad Shukri and Saadun, Mohd Noor Asril and Mohd Hanafi, Mohd Hafidzal (2013) Modeling of Flywheel Hybrid Powertrain to Optimize Energy Consumption in Mechanical Hybrid Motorcycle. Applied Mechanics and Materials, Volume. pp. 287-292. ISSN 1660-9336

Abdul Muhaimin , Mohd Shafie (2013) Wasted Heat Recovery System : How To Gain Energy. Project Report. UTeM, Melaka. (Submitted)

Abdul Rahim, Samsudin and Sivarao, Subramonian and Gannapathy, Vigneswara Rao and Wahyono Sapto, Widodo and Safiza Suhana, Kamal Baharin (2013) E-Preventive Maintenance Warning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Ahmad (2013) Design And Analyse The Configuration Of Earthing System Based On High-Low And Low-High Soil Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Azrul Azwan and Seliger, Günther (2013) Integrated control system simulation for supporting changes of routing strategy in an automated material flow system. Procedia CIRP. pp. 407-412. ISSN 2212-8271

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei , Masami (2013) Performance analysis of 6 Slot 8 Pole permanent magnet linear mot. Journal of Engineering and Technology, 4 (2). pp. 23-37. ISSN 2180-3811

Abdul Shukor, Fairul Azhar and Tashiro, Kunihisa and Wakiwaka, Hiroyuki and Misron, Norhisam (2013) Design and consideration of driving method of cylindrical VR type linear pulse motor. In: Technical Meeting on Linear Drives of IEE Japan, 22 Feb. 2013, Tokyo, Japan.

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei, Masami (2013) Performance Analysis Of 6 Slot 8 Pole Permanent Magnet Linear Motor. Journal of Engineering and Technology, 4 (2). pp. 23-37. ISSN 2180-3811

Abdul Shukor , Fairul Azhar and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Yajima, Hisashi and Kanazawa, Takehiko and Fujiwara, Nobuhiro (2013) Performance evaluation and comparison of switched reluctance cylindrical linear motor. In: The 22th MAGDA Conference, 2-3 December 2013, Miyazaki, Japan.

Abdul Talib, Din and Mustafar, Kadir and Roslina Aida , Rahimi and Fauzi, Khamis (2013) The Study on the Characteristics and Limitations of Pneumatic Lift for the Building of 4 Storey and Below, for the Development of a Low Cost and Safe Pneumatic Personal Lift. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing and Sulong, Muhammad Suhaizan (2013) The Importance of Information Quality Aspects in the Web-based Information Systems Development in Web-Consulting Organisations. In: 17th Pacific Asia Conference on Information Systems (PACIS), 18-22 June 2013, Jeju Island, Korea.

Abdul-Aziz, Azlianor and Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing (2013) Effective Web Development Through Quality of Information Thereby Increasing its Agility. Science International. pp. 1039-1043. ISSN 1013-5316

Abdulaziz Mohammed , Saleh Ghaleb (2013) Design and analysis of LTE-WLAN wireless router with QOS preservation. Masters thesis, UTeM.

Abdull Hanif , Abdull Rahman (2013) Microstructural Study On Different Type Of Biodiesel Fuel For Automotive. Project Report. UTeM, Melaka. (Submitted)

Abdullah, Abdul Rahim and ahmad, Nur Hafizatul Tul Huda and Sha'ameri, Ahmad Zuri and abidullah, Noor Athira and JOPRI, MOHD HATTA and Shair, Ezreen Farina (2013) Optimal Kernel Parameters of Smooth-Windowed Wigner-Ville Distribution for Power Quality Analysis. Journal of Basic and Applied Physics, 2 (4). pp. 235-242. ISSN 2304-9332

Abdullah, Abdul Rahim and ahmad, nur sumayyah and Bahari, Norhazilina and Manap, Mustafa and JOPRI, MOHD HATTA (2013) Short-Circuit Switches Fault Analysis of Voltage Source Inverter using Spectrogram. In: Electrical Machines and Systems (ICEMS), 2013 International Conference on, 26-29 October 2013, Busan, Korea.

Abdullah, Abdul Rahim and ahmad, nur sumayyah and Shair, Ezreen Farina and Jidin , Auzani (2013) Open switch faults analysis in voltage source inverter using spectrogram. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3-4 June 2013, Langkawi, Malaysia.

Abdullah, Lokman and Jamaludin, Zamberi and RAFAN, NUR AIDAWATY and Jamaludin, Jailani and Tsung Heng, Chiew (2013) Assessment on tracking error performance of Cascade P/PI, NPID and N-Cascade controller for precise positioning of xy table ballscrew drive system. In: International Confernce on Mechatronics (ICOM 2013), 2 - 4 July 2013, Vistana Hotel Kuala Lumpur, Malaysia.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2013) Optimized Nanolubricant for Friction Reduction. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 6 September 2013, Lyon, France.

Abdullah, Rohana and Mohamad, Nor Akramin and Kamat, Seri Rahayu (2013) Industrial Engineering for Technologist - Part 1. [Teaching Resource]

Abdullah, Rohana and mohamad, Nor Akramin and Kamat, Seri Rahayu (2013) Industrial Engineering For Technologist - Part 2. [Teaching Resource]

Abdullah, Abdul Rahim and zainal, Nur Qamarina and NORDDIN, NURBAHIRAH and Aman , Aminudin (2013) ONLINE SURFACE CONDITION MONITORING SYSTEM USING TIME FREQUENCY DISTRIBUTION ON HIGH VOLTAGE INSULATOR. AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, 7(11) (SEPTEM). pp. 7-14. ISSN 1991-8178

Abdullah, Lokman and Jamaludin, Zamberi and Ahsan, Qumrul and Jamaludin, Jailani and RAFAN, NUR AIDAWATY and Chiew, Tsung Heng and Jusoff, Kamaruzzaman and Yusoff, Marianna (2013) Evaluation on Tracking Performance of PID, Gain Scheduling and Classical Cascade P/PI Controller on XY Table Ballscrew Drive System. World Applied Sciences Journal, 21 (1). 01-10. ISSN 1818-4952

Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and RAFAN, NUR AIDAWATY and Maidin, Shajahan (2013) Theoretical Analysis of Close Loop Behaviour of Ideal Cascade Controller Structure for Positioning of XY Table Ballscrew Drive System. Applied Mechanics and Materials, 315 (1). pp. 493-497. ISSN 1660-9336

Abdullah, Lokman and Jamaludin, Zamberi and Qumrul, Ahsan and Nur Aidawaty, Rafan and Mariana , Yusof and Jamaludin, Jailani and Chiew, Tsung Heng (2013) Evaluation on Tracking Performance of PID, Gain Scheduling and Classical Cascade P/PI Controller on XY Table Ballscrew Drive System. World Applied Sciences Journal, 21 (1). 01-10. ISSN 1818-4952

Abdullah, Lokman and Jamaludin, Zamberi and Salleh, Mohd Rizal and Abu Bakar, Baharudin and Maslan, Mohd Nazmin and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY (2013) Design and Analysis of Self-tuned Nonlinear PID Controller for XY Table Ballscrew Drive System. In: 2nd International Symposium on Computer, Communication, Control and Automation (3CA 2013), 1 - 2 December 2013, Holiday Inn Atrium, Singapore.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2013) Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives. Procedia Engineering , 68. pp. 313-319. ISSN 1877-7058

Abdullah, Raihana Syahirah and Abdollah, Mohd Faizal and Muhamad Noh, Zul Azri and Mas'ud, Mohd Zaki and Selamat, Siti Rahayu and Yusof, Robiah (2013) Revealing The Criterion On Botnets Detection Technique. International Journal of Computer Science Issues , 10 (2). pp. 208-215. ISSN 1694-0814

Abdullah Mahfoudh, Salem Baadhem (2013) Exploring the business opportunities for Yemeni investors in Malaysia. Masters thesis, UTeM.

Abu, Maisarah and Hussin, Eryana Eiyda and Amin, Mohd Aeini and Mohd Raus, Teh Zanariah (2013) Dual-Band e-Shaped Antenna for RFID Reader. Journal of Telecommunication, Electronic and Computer Engineering. pp. 27-31. ISSN ISSN: 2180 - 1843

Abu, Maisarah and Hussin, Eryana Eiyda and Othman , A.R and Mohd Johar, Fauzi and Mohd Yatim, Norhidayah and Munawar, Rose Farahiyan (2013) Design of Stacked Wafers AMC at 920 MHz for Metallic Object Detection in RFID Application. In: 2013 IEEE SYMPOSIUM ON WIRELESS AND APPLICATIONS (ISWTA 2013), 22-25 SEPTEMBER 2013, KUCHING, SARAWAK.

Abu, Maisarah and Hussin, Eryana Eiyda and Zakaria, Zahriladha and Mohamad Isa, Mohd Sa'ari and Baharudin, Zikri Abadi (2013) Designing halfring Artificial Magnetic Conductor for RFID application. In: 2013 IEEE International RF and Microwave Conference , 9-11 December 2013, Bayview Beach Resort Penang.

Abu, Nur Azman and Ernawan, Ferda and Nanna Suryana, Herman (2013) An Image Dithering via Tchebichef Moment Transform. Journal of Computer Science, 9 (7). pp. 811-820. ISSN 1549-3636

Abu, Nur Azman and Ferda, Ernawan and Nanna Suryana, Herman (2013) A Generic Psychovisual Error Threshold for the Quantization Table Generation on JPEG Image Compression. In: IEEE 9th International Colloquium on Signal Processing and its Applications, , 8-10 March 2013, Kuala Lumpur.

Abu, Nur Azman and Ferda, Ernawan and Shahrin, Sahib (2013) A Psychovisual Model based on Discrete Orthonormal Transform. In: International Conference on Mathematical Sciences and Statistics 2013 , 5-7 Febuary 2013, Kuala Lumpur.

Abu, Nur Azman and Ferda , Ernawan and Hermman, NannaSuryana and Sahib, Shahrin (2013) Image Watermarking Using Psychovisual Threshold Over the Edge. In: Asian Conference on Availability, Reliability and Security (AsiaARES 2013), 25-29 March 2013, Yogyakarta.

Abu Bakar, Norazhar and Siada, A. Abu and Islam, S. (2013) A Review on Chemical Diagnosis Techniques for Transformer Paper Insulation Degradation. In: Australasian Universities Power Engineering Conference 2013, 29 Sept- 3 Oct 2013, Horbart, Australia.

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Madia and Mohamad Raffi, Nurul Fatin (2013) Finite Element Model of Machining with High Pressure Coolant for Ti- 6Al-4V alloy. Procedia Engineering, 53. pp. 624-631. ISSN 1877-7058

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md. Ali, Mohd Amran and Jusoff, Kamaruzzaman and Sivarao, Subramonian and Ariff, Hambali and Hussein, Nur Izan Syahriah and Wan Mahmood, Wan Hassrulnizzam and Abdullah, Abu and Yusoff, Marianna and Shamshiri, Meysam (2013) Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet. World Applied Sciences Journal, 21. pp. 98-104. ISSN 1818-4952

Abu Bakar, Norazhar (2013) Effect of Conducting Materials on UV-Vis Spectral Response Characteristics. Universal Journal of Electrical and Electronic Engineering, 1(3): . pp. 81-86. ISSN DOI: 10.13189/ujeee.2013.010304

Abu Daud , Halip (2013) An investigation on the influence of double heat treatment process on round stainless steel bar. Project Report. UTeM. (Submitted)

Abu Naeem, Abdul Bahar (2013) Express Sole Dryer (ESD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abugharsa, Ahmed Bashir and Basari, A.S.H and Almangush, Hamida (2013) A New Image Scrambling Technique using Block Rotation Algorithm based on Rubik’s Cube. Australian Journal of Basic and Applied Sciences. pp. 97-108. ISSN 1991-8178

Abugharsa, Ahmed Bashir and Basari, A.S.H and almangush, hamida (2013) A New Image Scrambling Approach using Block-Based on Shifted Algorithm. Australian Journal of Basic and Applied Sciences. pp. 570-579. ISSN 1991-8178

Achmad Umar, Baraja (2013) The Enhancement Of UTeM International Student Website : How Content Can Be Presented Using Minimalist Responsive Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adam Farhan, Mohd Dasril (2013) Development Of Motor Speed Control System By Using Acceleration Characteristic At Forearm For Remote Control Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adibah , Razali (2013) Manufacturing process selection for pet bottles using analytical hierarchy process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Adibah Haneem, Mohamad Dom and Mohd Rosli, Zulkifli (2013) Development of hydroxyapatite layer on superplastic Ti-6Al-4V for biomaterials applications. Advanced Materials Research. pp. 339-343. ISSN 1022-6680

Adli Zil Ikram , Abdullah (2013) Analysis the i beam subjected to three point loading or bending for different material. Project Report. UTeM, Melaka. (Submitted)

Adrian, Kh'ng Kean Chong (2013) Surface Electromyography Signal Classification For Human Computer Interaction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2013) A Review Of Concentrating Solar Power (Csp) In Malaysia Environment. International Journal of Engineering and Advanced Technology (IJEAT), 3 (2). pp. 378-382. ISSN 2249 – 8958

Afiqah, Sabari (2013) Space Vector Pulse Width Modulation For Industrial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afirah, Taufik (2013) An Intelligent System A Comparative Study Of Fuzzy C-Means And K-Means Clustering Techniques. (Submitted)

Afizrul Iman, Mohamed (2013) Storage Water Tanks Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, B. H. and Ariffin, M. M. and Hassan, Nornikman and Roslan , M. N. S. and Abd Aziz, M. Z. A. and M. A., Atiqa and A. R. , Ayuni and Y. W., Ming and Y. P., Yin (2013) Parametric Study on the Compact G Shaped Monopole Antenna for 2.4 GHz and 5.2 GHz Application. International Journal of Engineering and Technology, 5 (1). pp. 512-518. ISSN e-ISSN : 0975-4024

Ahmad, B. H. and H., Nornikman and Abdul Aziz, M.Z.A. and Othman, A. R. (2013) Tri-band Minkowski Island Patch Antenna with Complementary Split Ring Resonator at the Ground Plane. IEEEXplore. 46-51 . ISSN 978-1-4673-5512-4

Ahmad, B. H. and Shairi, N. A. and Saveridass, J. (2013) Low Cost Tunable Bandstop Filter Design of Defected Ground Structure using FR4 Substrate. International Journal of Electronics and Computer Science Engineering, 2 (2). pp. 595-601. ISSN ISSN- 2277-1956

Ahmad, B. H. and Zahari , M. K. and Wong, Peng Wen (2013) Design and Comparison of Reconfigurable Perfectly- Matched Bandstop Filters. International Journal of Electronics and Computer Science Engineering, 2 (1). pp. 360-369. ISSN ISSN- 2277-1956

Ahmad, Ibrahim and Jaafar, Azizah (2013) Integration of User Centered Game Design (UCGD) into game design framework. Applied Mechanics and Materials. pp. 2094-2099. ISSN 1660-9336

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2013) Effect of Activation Time on the Pinang Frond Based Activated Carbon for Remazol Brilliant Blue R Removal. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET 2013), 3 - 4 December 2013, MS Garden Hotel, Kuantan, Pahang..

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Cooray, Vernon (2013) Narrow Bipolar Pulses and Associated Microwave Radiation. In: PIERS 2013, 12 - 15 August 2013, Stockholm, Sweden.

Ahmad, Mohd Shakir and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Mohamad Yunus, Indera Kasuma and Azman, Mohd Syafiq (2013) Effect of Different Filler Materials in the Development of Bipolar Plate Composite for Polymer Electrolyte Membrane Fuel Cell (PEMFC). Applied Mechanics and Materials, 315 (2013). pp. 226-230. ISSN 10.4028/www.scientific.net/AMM.315.226

Ahmad , B. H. and Sabri , Siti Sabariah and Othman , A. R. (2013) Design of a Compact X-Band Substrate Integrated Waveguide Directional Coupler. International Journal of Engineering and Technology (IJET), 5 (2). pp. 1905-1911. ISSN ISSN : 0975-4024

Ahmad , B. H. and Minhad, K. N. (2013) A Review on Reconfigurable Low Pass Bandstop Filter Based on Technology, Method and Design. International Journal of Electronics and Computer Science Engineering, 2 (1). pp. 396-404. ISSN ISSN- 2277-1956

Ahmad Adlan, Zainal Ali (2013) HEPA Automated Filing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Al-Hakim, Shamsudin (2013) The Assessment Of Switchgear System Using Circuit Breaker Profiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Alif , Azhar (2013) Job advertising subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Ahmad Anwar , Mohamed Sabri (2013) Sistem Kawalan Brek Anti Kekunci (ABS). Project Report. UTeM, Melaka. (Submitted)

Ahmad Ashraf, Rawee (2013) Performance Analysis Of Video Call Application On Tablet Using 3G Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Harris, Abd Hamid (2013) Design Of A Low Cost Portable Heart Beats Monitor Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hilman Arif, Mustapa (2013) Online Conference Reservation Management System (onCRMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hisyamuddin , Hassan (2013) Novel EDM Screw Threading Technique Using Threaded Cavity Electrode. Project Report. UTeM, Melaka. (Submitted)

Ahmad Jamal, Salim and Soo, Yew Guan and Radi Husin, Ramlee (2013) Physiological Using FGPA In Health Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Kamely, Mohamad and Johny Purnomo, Joewono (2013) Performance Analysis Of Mechanical Properties And Weldment Area Of Aluminium Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khiar, Mohd Shahril and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Ab Ghani, Sharin and Sutan Chairul, Imran (2013) Diagnosis of OLTC via Duval Triangle Method and Dynamic Current Measurement. In: INTERNATIONAL TRIBOLOGY CONFERENCE MALAYSIA 2013, 18-20 November 2013, Kota Kinabalu, Sabah, Malaysia.

Ahmad Lutfi , Dahari (2013) Menilai prestasi enjin diesel menggunakan campuran minyak sayuran dengan diesel sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Ahmad Milad, Ali and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Sahib, Shahrin and Ahmad, Rabiah and Algaet, Mustafa Almahdi (2013) TRANSMISSION CONTROL PROTOCOL PERFORMANCE COMPARISON USING PIGGYBACK SCHEME IN WLANS. Journal of Computer Science. pp. 1-5. ISSN 1549-3636

Ahmad Mustafa, Ali (2013) A Study Of The Influence Of Cutting Parameter On Surface Roughness And Surface Morphology In High Speed Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nor Syahid, Hassan (2013) Self Organizing Map Technique For Transformers Condition Monitoring From SFRA Result. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Saufiyuddin, Razali (2013) Development Of A Map-Based Mobile Web Application With Mobile Payment Gateway For Public Transport Booking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Hanas (2013) Peranti Pemadam Kebakaran Automatik Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Hanas (2013) Peranti Pemadam Kebakaran Automatik Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2013) Development Of Open System And Application Mobile Platform For All Terrain Locomation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusoff, Hassan (2013) Majlis Perutusan Naib Canselor UTeM 2013. [NC Speech] (Submitted)

Ahmed Yaser, Mohd Zabawi (2013) M-Faraid Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ain Natasha, Marafi (2013) Design Of A Reactive Power Compensation For Transmission Line Voltage Sags Due To Faults. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aina Fairuz, Mohd Ariffin (2013) Paddy Field Irrigation Control System By Using Programmable Logic Control (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aini Noor Liana, Azmi (2013) Prediction Of Propagation Path Loss Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah Illani, Sulaiman (2013) Wearable Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akalili, Abdullah (2013) Blood Bank Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Suriati (2013) A Methodology for Developing Manufacturing Process Ontologies. Journal of Japan Industrial Management Association. pp. 303-316. ISSN 0386-4812

Akmarina Izza, Mokeri (2013) Smart Parking Via RFID Tag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan and Isa , Halim and Nor Akramin, Mohamad and Febrian, Idral and Taufik, , (2013) A Review on Ergonomics Risk Factors and Health Effects Associated with Manual Materials Handling. Advanced Engineering Forum. pp. 251-256. ISSN 2234-991X

Al-Amani, Umar (2013) Rare-earth substitution in Bi4Ti3O12 system for potential application. In: The 5th AUN/SEED-Net Regional Conference on Materials Processing & The 5th Regional Conference on Natural Resources and Materials, 22 - 23 January 2013, Penang.

Al-Amani, Umar and Srimala , Sreekantan and Ahmad Fauzi , Mohd Noor and Khairunisak, Abd Razak (2013) Single step combustion synthesis for the preparation of bismuth titanate ceramics for potential applications. Advanced Materials Research, 620 (doi:10). pp. 429-434. ISSN 10.4028/www.scientific.net/AMR.620.429

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alagendran, Andiappan (2013) Developing Lean - EMS Integration Database For Sustaining ISO 14000 Certification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alfred, Pun Khee Seong (2013) The Relationship Between Human Resource Information System (HRIS) And Human Resource Management (HRM). Project Report. UTeM, Melaka. (Submitted)

Algaet, Mustafa Almahdi and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Ahmad Milad, Ali (2013) A Review on Framework and Quality of Service Based Web Services Discovery. European Journal of Scientific Research. pp. 1-23. ISSN 1450-216X/ 1450-202X

Ali, Mohd Basri and Abdullah, Shahrum and Nuawi, Zaki and Ariffin, Ahmad Kamal (2013) Correlation of absorbed impact with calculated strain energy using an instrumented Charpy impact test. Indian Journal of Engineering & Materials Sciences, 20. pp. 504-514. ISSN 0975-1017

Ali, Fara Ashikin and Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Sulaima, Mohamad Fani and Ismail, Jaaffar (2013) Design and Development of Auto Depth Control of Remotely Operated Vehicle (ROV) using Thruster System. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang.

Ali, Fara Ashikin and Abdul Azis, Fadilah and Mohd Aras, Mohd Shahrieel and Muhammad Nur , Othman and Shahrum Shah, Abdullah (2013) Design A Magnetic Contactless Thruster of Unmanned Underwater Vehicle. International Review of Mechanical Engineering (I.RE.M.E.), 7 (7). pp. 1413-1420. ISSN 1970-8734

Ali @ Ibrahim, Fariz (2013) An Improved Trajectory of Bipedal Robot Walking along a Step with Dual Length Linear Inverted Pendulum Method(DLLIPM). PhD thesis, Yokohama National University.

Aliaa Syahirah, Abd Rashid (2013) Analysis Of Android Malware (Droidkungfu 2) Through Their Behavior Using Static Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias, Nor Faezah and Jidin , Auzani and Razi, Atikah and Sutikno, Tole and Ismail, Huzainirah (2013) Simple Switching Strategy for High-Torque Control Performance utilizing Neutral Point Clamped Multilevel Inverter. Simple Switching Strategy for High-Torque Control Performance utilizing Neutral Point Clamped Multilevel Inverter. pp. 400-408. ISSN 2088-8694

Alias, Azrita (2013) A Single-Input Single-Output Approach by using Minor-Loop Voltage Feedback Compensation with Modified SPWM Technique for Three-Phase AC–DC Buck Converter. Journal of Power Electronics, 13 (5). pp. 829-840. ISSN 15982092

Alias, Nor Faezah and Jidin , Auzani and Said, Mohamed Azmi and Abdullah, Abdul Rahim and JOPRI, MOHD HATTA and Rahim, Nor Hidayah (2013) Improved Performance of Direct Torque Control of Induction Machine with 3-Level Neutral Point Clamped Multilevel Inverter. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Alias , Khamis and Mohamed, Azah and Shareef, Hussain and Ayob, Afida and Mohd Aras, Mohd Shahrieel (2013) Modelling and Simulation of a Single Phase Grid Connected Using Photovoltaic and Battery Based Power Generation. In: European Modelling Symposium 2013, 20/11/2013 - 22/11/2013, Manchester Conference Centre.

Aliff Fahmi , Radzi (2013) Green technology of synthetic rubber for the future tire. Project Report. UTeM. (Submitted)

Alwi, Saifulza and Yasutaka, Fujimoto (2013) Formal Verification of Logic Control Systems with Nondeterministic Behaviors. IEEJ Journal of Industry Applications, 2 (6). pp. 306-314. ISSN 2187-1094

Aman, Aminudin and Ibrahim, Khairul Anwar (2013) Polymeric composite based on waste material for high voltage outdoor application. Electrical Power and Energy Systems, 45. pp. 346-352. ISSN 0142-0615

Amerul Aeyraff, Mustapa (2013) Design and development for iBook : the concept of multimedia, sound and video. Project Report. UTeM. (Submitted)

Aminudin , Aman (2013) New leakage current parameters for newly developed polymeric composite optimized by response surface methodology. PhD thesis, UTeM.

Amiruddin , Shahipurullah (2013) Investigation Of Extracting Oil From Waste Palm Fruit Fibre. Project Report. UTeM, Melaka. (Submitted)

Amirul Asyraf, Mat Nasir (2013) Preparation And Characterization Of Green Rubber Foam From Reclaimed Rubber Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirullah , Amran (2013) Bahan api pepejal daripada sisa bahan buangan industri minyak kelapa sawit. Project Report. UTeM, Melaka. (Submitted)

Amjad Saddar , Md. Isa (2013) Pembangunan Sistem Kuasa Penggerak Hibrid Elektrik Untuk Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Anas Mujahid, Mohammad Khair (2013) Mechanical Behaviour & Water Absorption Of Metal Matrix Composite (TN+Rice Husk) Fabricated Via Permanent Mould Casting - ( Experiment with 10% And 25% Of Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anawar, Syarulnaziah and Pramudya Ananta, Gede and Zainal Abidin, Zaheera and Ayop, Zakiah and Yahya, Saadiah (2013) Conceptualizing Autonomous Engagement in Participatory Sensing Design: A Deployment for Weight-Loss Self Monitoring Campaign. In: 2013 IEEE Conference on e-Learning, e-Management and e-Services, December 2 - 4, 2013, Serawak. (Submitted)

Ang, Ling Yuen (2013) Simulation Of Intelligent PID Temperature Controller. Project Report. UTeM, Melaka. (Submitted)

Ang, Soon Chang (2013) Design And Development Of Tactile Detection By Using RFID Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aninorbaniyah, Bairan (2013) The effects of carbon nanotube on the properties of graphite-carbon black-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Anis Niza, Ramani (2013) Design and Analysis Electrical Energy form Clay Soil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Jaafar and Muhammad Noorazlan Shah, Zainudin and Mohd Muzafar, Ismail (2013) Modelling And Analysis Of Bit-Communication Behaviour In Artificial Swarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar , Mohamed Kassim and Subramonian, Sivarao and Jaafar, Hazriq Izzuan (2013) Brake Motion Control for Quadruped Hopping Robot by Using Reference Height Control System. International Review of Mechanical Engineering, 7 (6). pp. 784-790. ISSN 1970 - 8734

Anuar , Mohamed Kassim and Abas, Norafizah and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri (2013) Performance study of Reference Height Control Algorithm for Tripod Hopping Robot. International Review of Mechanical Engineering (I.RE.M.E.), 7 (5). pp. 784-789. ISSN 1970-8734

Anuar , Mohamed Kassim and Jamri , Mohd Saifuzam and Othman, Md Nazri and Ab Rashid, Mohd Zamzuri (2013) Design and Development of Low Cost Certified Green Building for Non Residential Existing Building (NREB). Advanced Materials Research. pp. 1125-1129. ISSN 1662-8985

Anuar , Mohamed Kassim and Shukor, Ahmad Zaki (2013) Exploratory Study on Navigation System for Visually Impaired Person. Australian Journal of Basic and Applied Sciences. pp. 211-217. ISSN 1991-8178

Anuar , Mohamed Kassim and Shukor, Ahmad Zaki (2013) Performance Study of Developed SMART EYE for Visually Impaired Person. Australian Journal of Basic and Applied Sciences. pp. 633-639. ISSN 1991-8178

Anuar , Mohamed Kassim and Abdul rashid, Mohd Zamzuri and Mohd Rusdy , Yaacob and Abas, Norafizah (2013) Effect of Reference Height Control System on CPG Networks for Quadruped Hopping Robot. Applied Mechanics and Materials , (Volum. pp. 498-502. ISSN 1662-7482

Anuarulnam, Ramli (2013) Counterfeit Banknote Detection & Counting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aqmal, Hashim (2013) Remanufacturing Analysis By Using Failure Mode And Effects Analysis (FMEA) For Engine Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arbaeyah, Abdul Razak (2013) Optical Solitons Simulation In Single Mode Optical Fiber Over 40GB/S. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ardika Ridal, Awang (2013) The investigation of turbo generator on exhaust manifold in spark ignition engine. Project Report. UTeM, Melaka. (Submitted)

Arham Syafiq , Azmi (2013) Mechanical properties of polyperties of polypropylene filled wood fiber composites. Project Report. UTeM. (Submitted)

Arief, Mostapah (2013) Design Of S-band Microstrip Bandpass Filter For S-Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arith, Faiz and Sharafina, Anis and Idris, M. Idzdihar and M. Yunus, Mawarni (2013) PV-Mini Hydro-Diesel Hybrid System in a Village. International Journal of Engineering & Computer Science, 13 (2). pp. 1-7. ISSN 2077-1231

Arith, Faiz and Idris, Muhammad Idzdihar and Zainudin, Muhammad Noorazlan Shah and Mohd. Chachuli, Siti Amaniah (2013) Low voltage CMOS Schmitt Trigger in 0.18μm technology. IOSR Journal of Engineering (IOSRJEN), 3 (2). pp. 8-15. ISSN e-2250-3021, p-2278-8719

Arshad, Yusri and Ahalan, Abdul Rahman (2013) IT outsourcing as an innovative strategy for economic advancement: lessons from Malaysia. In: 2013 5th International Conference on Information and Communication Technology for the Muslim World., 2012, Morocco.

Arshad, Yusri and Ahlan, Abdul Rahman and Syed Ibrahim, Sharifah Norhafiza (2013) Combining Grounded Theory and Case Study Methods in IT Outsourcing Study. JOURNAL OF INFORMATION SYSTEMS RESEARCH AND INNOVATION. pp. 84-93. ISSN 2289-1358

Ashafi'e , Mustafa (2013) Tribological properties of nanoparticles as lubricating oil additives. Project Report. UTeM, Melaka. (Submitted)

Asmala, A. and Burhanuddin , Mohd Aboobaider and Ghani, M.K. A. and Razali, Sazalinsyah and Mohd Sa'ari, Mohamad Isa and Noorazuan, H. (2013) A Localised Cloud Detection and Masking Method Using Spectral Analysis. Australian Journal of Basic and Applied Sciences, 7 (14). pp. 3-10. ISSN 19918178

Asmala, A. (2013) Classification Simulation of RazakSAT Satellite. Procedia Engineering , 53. pp. 472-482. ISSN 1877-7058

Asmala, A. and Shaun, Quegan (2013) Comparative Analysis of Supervised and Unsupervised Classification on Multispectral Data. Applied Mathematical Sciences, 7 (74). pp. 3681-3694. ISSN 1312-885X

Asok Max , Subramaniam (2013) Active Suspension Control Of Ground Vehicle Heave And Pitch Motion. Project Report. UTeM, Melaka. (Submitted)

Asriana, Ibrahim (2013) A STUDY OF VEGETABLE OILS AS A HELICAL GEAR LUBRICANT. In: Seminar Kebangsaan Aplikasi Sains dan Matematik (SKASM), 29-30 Oktober 2013, Perpustakaan Tunku Tun Aminah, UTHM Johor. (Submitted)

Auni Zahidah , Mohd Zanggi (2013) Factors Affecting Job Satisfaction To Increase Performance Of Workers At Syarikat Air Terengganu (SATU) Daerah Hulu Terengganu. Project Report. UTeM, Melaka. (Submitted)

Awang Md Isa, Azmi and Johal, Muhammad Syahrir and Mohd Zin, Mohd Shahril Izuan and Mohamad Isa, Mohd Sa'ari (2013) Location Estimation Utilising WiMAX Preamble Detection Under ITU-R Channel Models. In: 2013 IEEE Student Conference on Research & Development(SCOReD), 16 - 17 December 2013, Palm Garden Hotel, Putrajaya, Malaysia.

Awang Md Isa, Azmi and Mohamad Isa, Mohd Sa'ari and Haron, Nor Zaidi and Zakaria, Zahriladha and Mohd Zin, Mohd Shahril Izuan (2013) Utilising MIMO for Positioning in Mobile WiMAX Systems. In: Wireless Technology and Applications (ISWTA), 2013 IEEE Symposium on, 22 -25 Sept 2013, Kuching, Malaysia.

Awang Md Isa, Azmi and Mohamad Isa, Mohd Sa'ari and Mohd Zin, Mohd Shahril Izuan and Haron, Nor Zaidi and Ja'afar, Abd Shukur (2013) Analysis of WiMAX Positioning Using Received- Signal-Strength Method. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 5 (2). pp. 19-25. ISSN 2180-1843

Ayu Natasya , Kasim (2013) Effects of bf length on the properties of bamboo/polypropylene composite. Project Report. UTeM. (Submitted)

Ayuni Fateehah , Muda (2013) Novel structure method for punch through current in decanano MOSFET. Project Report. UTeM. (Submitted)

Azahar, Arman Hadi and Chong, Shin Horng and Mohammed Kassim, Anuar (2013) Vertical motion control of a one legged hopping robot by using central pattern generator (CPG). In: IEEE Symposium on Industrial Electronics and Applications, September 22-25, 2013, Kuching, Malaysia.

Azidin, Farid Arafat and Hannan, Mahammad Abdul and Mohamed, Azah (2013) Renewable Energy Technologies and Hybrid Electric Vehicle Challenges. PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), 89 (8). pp. 150-156. ISSN 0033-2097

Azidin, Farid Arafat and Hannan, Mahammad Abdul and Mohamed, Azah (2013) An Energy Management of Light Electric Vehicle. An Energy Management of Light Electric Vehicle, 2 (2). pp. 271-276. ISSN 2315-4462

Azim, Aziz (2013) The effect of cooling rate on mechanical and morphological properties of heat treated recycled aluminum alloy from scrap. Masters thesis, UTeM.

Azizul Asri , Subbi (2013) Mobile robot using GPS module. Project Report. UTeM. (Submitted)

Azlinda, Mohamad (2013) Optimization Of Injector Gun Design Using Design For Manufacturing And Assembly (DFMA) At The Conceptual Design Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, M.N and Rafeq, Saleman Abdul and Nadlene, Razali and Irwan, M.A.M and Aishah, A.M. (2013) TENSILE AND HARDNESS PROPERTIES OF KENAF-PP/PLA COMPOSITE FILLED NANOCLAY. In: International Conference on Engineering and ICT (ICEI2012), 4 - 5 APRIL 2012, BANDA HILIR, MELAKA.

Azmi, Mohd Sanusi and Omar, Khairuddin and Nasrudin, Mohamad Faidzul and Muda, Azah Kamilah (2013) Fitur Baharu dari Kombinasi Geometri Segitiga dan Pengezonan untuk Paleografi Jawi Digital. PhD thesis, Universiti Kebangsaan Malaysia.

Azmi, Mohd Sanusi and Omar, Khairuddin and Nasrudin, Mohammad Faidzul and Che Wan Ahmad, Che Wan Shamsul Bahri and Wan Mohd Ghazali, Khadijah (2013) Exploiting Features from Triangle Geometry for Digit Recognition. In: 2013 International Conference on Control, Decision and Information Technologies (CoDIT 2013), 6-8 May 2013, Hammamet Tunisia.

Azmirah , Mohammad (2013) Relationship Between Entrepreneurial Characeristic And Tendency To Become An Entrepreneur. Project Report. UTeM, Melaka. (Submitted)

Azrina, Abdul Halim (2013) Process Of Abrasive Grinding Computer Numerical Control (CNC) Machine To Grind Tooling And Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Hafez , Mohamad (2013) Study Of Design And Fabricate Driving Simulator. Project Report. UTeM, Melaka. (Submitted)

Azziddin , Mohamad Razali (2013) Analysis, design and control of grid connected three phase pulse width modulated AC-DC converter. PhD thesis, UTeM.

ahmad, Nur Hafizatul Tul Huda and Abdullah, Abdul Rahim and JOPRI, MOHD HATTA (2013) Power Quality Signals Detection Using S-Transform. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

B

B. H. , Ahmad and K. N. , Minhad (2013) A Review on Reconfigurable Low Pass Bandstop Filter Based on Technology, Method and Design. International Journal of Electronics and Computer Science Engineering, IJECSE , Vol. 2 (No. 1). pp. 395-404. ISSN ISSN- 2277-1956

Badr Kamoon, Dabis (2013) Laser processing of linear bevel cutting. Masters thesis, UTeM.

Badrul Hisham, Ahmad (2013) Design Of Switchable Matched Bandstop Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahaman, Nazrulazhar and Anton Satria, Prabuwono and Teddy , Mantoro (2013) Reconnaissance Attack on IPv6 to IPv4 Tunneling. In: International Journal of Mobile Computing and Multimedia Communication. IGI Publishing, USA, pp. 1-9. ISBN 978-1-4666-3085-7

Bahri, Azizi (2013) Simulation and analysis of material transport system in automotive industry area. Masters thesis, UTeM.

Bapokutty, Omar and Sajuri, Zainuddin and Junaidi, Syarif (2013) STRESS RELAXATION BEHAVIOUR AND MECHANISM OF HEAT TREATED INCONEL 718 IN HIGH TEMPERATURE ENVIRONMENTS. Journal of Industrial Technology SIRIM, 21 (1). pp. 43-51. ISSN 0128-4940

Bayasut, Bilal and Pramudya, Gede and Basiron, Halizah (2013) The Review of Adaptive Educational Hypermedia System Based on Learning Style. In: Colloquium On Active Learning (CAL 2013), May 2013, UTeM.

Bidin, Mardiana and Shaari, Sahbudin and Menon, P.S and A.R, Hanim and Haroon, Hazura and Arsad, N. and Abdullah, H. (2013) Various Sloped Wall Effect on Silicon on Insulator (SOI) Phase Modulator. Advanced Science Letters. pp. 1438-1440. ISSN ISSN 1936-6612

Bin Md Fauadi, Muhammad Hafidz Fazli and Yahaya, Saifudin Hafiz (2013) Intelligent Combinatorial Auctions of Decentralized Task Assignment for AGV With Multiple Loading Capacity. IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 8 (4). pp. 371-379. ISSN 1931-4973

Bong, Yu Jing and Kok, Swee Leong (2013) Demonstration of Self-Powered Accelerometer Using Piezoelectric Micro-Power Generator. In: IEEE Student Conference on Research and Development (SCOReD) 2013, December 16-17, 2013, Palm Garden Hotel, Putrajaya, Malaysia. (In Press)

Bong, Yu Jing (2013) Responsive attendance system based on thumb scanning. Project Report. UTeM. (Submitted)

Bugis, Ismadi and Hassen Kareem, Maithem (2013) APPLICATION OF SWALLOWTAIL CATASTROPHE THEORY TO TRANSIENT STABILITY ASSESSMENT OF MULTI-MACHINE POWER SYSTEM. Journal of Theoretical and Applied Information Technology, 55 (3). pp. 390-397. ISSN 1992-8645

Bugis, Ismadi and Hassen Kareem, Maithem (2013) Dual Generator Cluster Transient Stability Assessment Using Swallowtail Catastrophe Theory. International Review on Modelling and Simulations, 6 (3). pp. 931-936. ISSN 1974-9821

C

Chai, Siao Ling (2013) The Segmentation Of Satellite Image Using Region-Based And Watershed Transform Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Zhi Hao (2013) Development Of Self-Powered Dual-Axis Solar Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Boon Huan (2013) An investigation of nose shape design for high speed train using the concept of Kingfisher bird's beak /. Project Report. UTeM. (Submitted)

Chang, Ling Kwai (2013) Portable Physiotheraphy Limbs Rehabilitation Robot - Structural Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Khalid, Nor Syuhada and Burhanuddin , Mohd Aboobaider and Asmala, A. and Ghani, M.K. A. (2013) Classification Techniques in Blood Donors Sector – A Survey. E-Proceeding of Software Engineering Postgraduates Workshop (SEPoW) 2013. pp. 114-118. ISSN 978-967-0257-33-4

Che Ku Mohd, Che Ku Nuraini and Shahbodin, F. (2013) Personalized Learning Environment (PLE): Need Analysis in Malaysian’s Secondary School. In: IEEE Conference on e-Learning, e-Management and e-Services , 2nd – 4th December 2013, Kuching, Sarawak, Malaysia.

Cheah, Yee Mun (2013) Modelling and experimental investigation on perforated plate mobility. Project Report. UTeM, Melaka. (Submitted)

Chee Fai, Tan and Sarban Singh, Ranjit Singh (2013) Design And Development Of An Interactive Concurrent Engineering Design System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Kar Lock (2013) GSM Based Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, S.Y. (2013) Aerodynamic Pitching Stability of Sedan-type Vehicles Influenced by Pillar-shape Configurations. In: SAE 2013 World Congress & Exhibition, 16-18 April 2013, Detroit, USA.

Cheng, S.Y. (2013) Aerodynamic stability of road vehicles in dynamic pitching motion. Journal of Wind Engineering and Industrial Aerodynamics, 122. pp. 146-156. ISSN 01676105

Cheong, Kar Mee and Zanariah, Jano and Aziz , Yahya and Hanipah , Hussin (2013) THE MOTIVATIONAL FACTORS AMONG UNDERGRADUATES LEARNING MANDARIN IN A HIGHER EDUCATION INSTITUTION. Scottish Journal of Arts, Social Sciences and Scientific Studies, 17 (1). pp. 79-87. ISSN 2047 - 1278

Chew Seow, Lee (2013) Effect of Wire Electrical Discharge Machining (WEDM) parameters and additive treatment on surface roughness and dimensional stability of tool steel. Masters thesis, UTeM.

Chia, Clement Kuan You (2013) Voice Recognition Robotic Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chia, Pooi Ching (2013) Preparation Of Spent Tea Leaves Filled Polyurethane Composites For Sustainable Sound Absorbing Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and RAFAN, NUR AIDAWATY and Abdullah, Lokman (2013) Identification of Friction Models for Precise Positioning System in Machine Tools. Procedia Engineering , 53 (1). pp. 569-578. ISSN 1877-7058

Chin, Xin Yan (2013) High Rise Building Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Francis Jun Hau (2013) Robust Positioning Control Of Magnetic Levitation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Kooi Lim (2013) Design on fall detection system using Micro-Electro-Mechanical System (MEMS) accelerometer and gyroscope. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Ci Ling (2013) Self-energize and wireless network mini information display board system. Project Report. UTeM. (Submitted)

Chong, Hock Yean (2013) Energy efficiency through photovoltaic system in the administration building of Johor Matriculation College. Masters thesis, UTeM.

Chong, Kuan Eng and Lim, Ke Sin (2013) CONWIP based Control of a Semiconductor End of Line Assembly. Procedia Engineering , 53. pp. 607-615. ISSN 1877-7058

Choo, Hui Hui (2013) A Study Of Work Postures And Grip Force For Carpal Tunnel Syndrome (CTS) Among Workers In Aero Space Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Kok Lin (2013) Biometric Voice Recognition In Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choy, Min Yee (2013) Quick Response Code Technology For Marketing Purpose : Improving Tracking Code From Barcode. Project Report. UTeM, Melaka. (Submitted)

Chua, Pei Yong (2013) Reconfigurable Dual Polarization Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Zhi Yen (2013) Tea Trading System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chuah, Peng Peng (2013) Labor Cost System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chwa, Shie Huan (2013) Zigbee-Based Smart Fall Detection And Notification System With Wearable Sensor E-Safe. Project Report. UTeM, Melaka, Malaysia. (Submitted)

chitrambalam, S.Thiru and Lai Huat, Chew and bin Idral, Febrian (2013) PREDICTION and MEASUREMENT of WELD DILUTION in ROBOTIC CO2 ARC WELDING. World Applied Sciences Journal (WASJ). pp. 23-30. ISSN 18184952

D

Dhar malingam, Sivakumar and KalyanaSundaram, Shankar (2013) Temperature Effect on Forming of Self- Reinforced Polypropylene Based Lightweight Metal Composite Structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811

Dhar malingam, Sivakumar and KalyanaSundaram, Shankar (2013) Temperature Effect on Forming of Self- Reinforced Polypropylene Based Lightweight Metal Composite Structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811

Dhivya, Selvakumaran (2013) A Comparison Study Of Synchronization Measures In Accessing The Neural. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dimin, Mohd Fairuz and Se, SianMeng and Shaaban, Azizah (2013) Urea Impregnated Biochar to Minimize Nutrients Loss in Paddy Soils. In: Proceedings of Malaysian Technical Universities Conference on Engineering & Technology (MUCET) , 3-4/12/2013, Kuantan, Pahang, Malaysia. (Submitted)

E

Eddy Saufi, Husni (2013) Electronic Medical Assistant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ehab, A Abdurazzak (2013) The perception of Iraqi people on the Malaysian Islamic Banking System. Masters thesis, UTeM.

Eliakim, Che Yaakob (2013) To Design And Develop Islanding Detection Interface System For PV Connected Microgrid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eliyana, Ruslan (2013) Uplink Radio Access Point With Radio Over Fiber Technology For Picocell System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elysa Sakinah , Md. Amin (2013) Development Of Image Filtering System For Car Sticker Detection. Project Report. UTeM, Melaka. (Submitted)

Eng, Wei Sy (2013) Merging Of Writer Identification Technology Into Mobile Application For Forensic Document Handwriting Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

Fadzil , Che Man (2013) Development Of Automated-Guided Vehicle For 300kg Trolley Towing Application. Project Report. UTeM, Melaka. (Submitted)

Fahmi , Samat (2013) Design of conceptual smart trash can. Project Report. UTeM. (Submitted)

Fairuz Fazillah, Shuhimi (2013) The effects of stainless steel on the properties of graphite-polypropylene composite for bipolar plate. Project Report. UTeM. (Submitted)

Faizatul Hanim, Rahmat (2013) Traffic Light Led Fault Monitoring And Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Enhancing Eco-Friendly Hydraulic Technology: The Development Of Low Pressure Water Hydraulic Manipulator For Small And Medium Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faizil, Wasbari (2013) Study Of Heat Exchanger Effects On Car Air - Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakrulradzi, Idris (2013) Deployment And Performance Analysis Of Wifi Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Sharidah, Ab. Gafor (2013) Automatic Toilet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris Adam , Mohd Ghazali (2013) Mobile Robot Motion Planning Based On Notion Of Artificial Potential Field (APF). Project Report. UTeM, Melaka. (Submitted)

Farlister Glenn, Gainus (2013) Feasibilty Study In Implementing Of Microgrid By Using Fuel Cells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatehah Hanim, Ahmad Othman (2013) Forecasting Plant Vigor Through Vegetation Index Mapping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatin Nabilah, Rosly (2013) Design And Analysis Of Polypropylene Plastic Name Card Holder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fazlli , Patkar (2013) PWM techniques for control of dual-inverter supplied six-phase drives. PhD thesis, Universiti Teknikal Malaysia Melaka.

Fong, Yan Li (2013) Quality Investigation Of Laser Wood Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Ming Yee (2013) Modeling Complex And Dynamic Real Life Scenario. Project Report. UTeM, Melaka. (Submitted)

Fu, Fang Xiong (2013) CFD Of Liquefied Natural Gas (LNG) behaviour during tank filling. Project Report. UTeM, Melaka. (Submitted)

G

G. Noma, Nasir and Mohd Khanapi, Abd Ghani and Mohamad Khir , Abdullah (2013) Identifying Relationship between Hearing loss Symptoms and Pure-tone Audiometry Thresholds with FP-Growth Algorithm. IJCA. pp. 24-29. ISSN 0975 – 8887

G. Noma, Nasir and Mohd Khanapi, Abd Ghani and Mohamad Khir , Abdullah and Noorizan , Yahya (2013) Predicting hearing loss symptoms from Audiometry data using FP-Growth Algorithm and Bayesian Classifier. Australian Journal of Basic and Applied Sciences (AJBAS). pp. 35-43. ISSN 1991-8178

Gan, Chin Kim (2013) Role of losses in designing electricity distribution networks. IET Malaysia Local Network Newsletter. pp. 6-7. ISSN

Gan, Chin Kim and Mohamad, Syahrul Hisham and Prayun, Wirun and Tan, Chee Wei and Cheng, Siong Lim and Goh, Joon Sern (2013) Solar Technology and Implementations in Malaysia: A Review. Advances in Natural and Applied Sciences. pp. 542-555. ISSN 1995-0772

Gan, Chin Kim (2013) Smart control for minimizing distribution network reinforcement cost due to electrification. Energy Policy, 52. pp. 76-84. ISSN 0301-4215

Gan, Chin Kim and Ahmad Farid, Sapar and Yik, Chee Mun and Chong, Kuan Eng (2013) Techno-economic Analysis of LED Lighting: A Case Study in UTeM’s Faculty Building. Procedia Engineering , 53. pp. 208-216. ISSN 1877-7058

Gan, Chin Kim and Pudjianto, Danny and Djapic, Predrag and Strbac, Goran (2013) Strategic Assessment of Alternative Design Options for Multivoltage-Level Distribution Networks. IEEE Transactions on Power Systems. pp. 1-9. ISSN 0885-8950

Gan, Chin Kim and Tan, Pi Hua and Khalid, Shamsudin (2013) System Performance Comparison Between Crystalline and Thin-Film Technologies under Different Installation Conditions. In: 2013 IEEE Conference on Clean Energy and Technology, 18-20 November 2013, Langkawi, Malaysia.

Gan, Sin Yi (2013) Development Of A Simulation-Based Decision Support Model For High Precision Component Manufacturer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Abdul Latiff, Anas (2013) An Enhancement of RTS/CTS Control Handshake in CSMA/CA Based MAC Protocol for an Efficient Packet Delivery over Multihop Wireless Mesh Network (WMN). International Journal of Research in Engineering and Technology (IJRET), Vol-02 (Iss-10). pp. 604-608. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Latiff, Anas (2013) ZIGBEE-BASED SMART FALL DETECTION AND NOTIFICATION SYSTEM WITH WEARABLE SENSOR (e-SAFE). International Journal of Research in Engineering and Technology (IJRET), Vol-02 (Iss-08). pp. 337-344. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Goh, Zia Huey (2013) Performance Characterization Of Photo Materials Used In Silicon Technology Fabrication Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gunasilan , Nagaiya (2013) The contribution of quality management principles and practices to the organizational performance. Masters thesis, UTeM.

Gwee, Chiou Chin (2013) The performance of tool holder clamping technique in conventional lathe with passive damping system. Masters thesis, UTeM.

H

H'ng, Zhuang Wei (2013) Design Of Operational Counting Device. Project Report. UTeM, Melaka. (Submitted)

HARUN, Mohd Hanif and W Abdullah, W. M. Zailimi and ABDULLAH, Mohd Azman and JAMALUDDIN, Hishamuddin and ABD RAHMAN, Roslan and HUDHA, Khisbullah (2013) The Analysis of Railway Vehicle with Semi-Active Secondary Suspension System under Harmonic Excitation Disturbance. In: Annual Conference on Engineering and Information Technology 2014, 28-30 June 2013, Seoul, Korea.

Hadi, M. H. and Badrul Hisham, Ahmad and Noor Azwan, Shairi and Peng Wen, Wong (2013) Effect of a discrete PIN diode on Defected Ground Structure. In: Wireless Technology and Applications (ISWTA), 2013 IEEE Symposium on, 22 -25 Sept 2013, Kuching, Malaysia.

Hafini Suhana , Ithnin (2013) The Process Of Performance Appraisal To Improve Employee's Satisfaction At Company XYZ. Project Report. UTeM, Melaka. (Submitted)

Hafizin , Hanipah (2013) Design And Development Of A Protable Spark Plug Tester For Motocycle User. Project Report. UTeM, Melaka. (Submitted)

Hafizuddin, Zuhaimi (2013) The Effect Of Different Heat Treatment On Surface Retrogression On Aluminum Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haikal, Ismail (2013) Implication of job satisfaction and organizational commitment on employee loyalty in manufacturing companies. Masters thesis, UTeM.

Halizah, Saad (2013) Investigating Goldream Behaviour Through Dynamic Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hambali, Arif and Ab. Rahman , Mahmood and Isa, Halim (2013) The Use OF Analytical Hierarchy Process (AHP) In Product Development Process. In: International Symposium on the Analytic Hierarchy Process 2013, 23 - 26 June 2013, Hotel Istana, Kuala Lumpur, Malaysia.

Hambali, Arif and T., Joseph Sahaya Anand and Sivarao, Subramonian (2013) Finite Element Analysis of Conceptual Lumbar Spine for Different Lifting Position. World Applied Sciences Journal, 21. pp. 68-75. ISSN 1818-4952

Hamdi Hussein, El Grour (2013) Comparative study for material removal rate, surface finish and electrode wear rate on die sinking edm. Masters thesis, UTeM.

Hamid, Nor Nadiah Abdul and Mohamad, Noraiham and Hing, Lum Yip and Dimin, Mohd Fairuz and Azam, Mohd Asyadi and Hassan, Mohd Haneesyah Che and Mustaq, Mohd Khairul Shahril and Ahmad, Azizah Shaaban (2013) The effect of chitosan content to physical and degradation properties of biodegradable urea fertilizer. Journal of Scientific and Innovative Research, 2 (5). pp. 893-902. ISSN 2230-4818

Hanafi, M. H and Wan Mahmood, W. M. F and Roslizar, Aiman and Zakaria, M. S. and Saadun, M. N. A and Rafeq, Saleman Abdul (2013) Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force. Applied Mechanics and Materials. pp. 275-280. ISSN 1660-9336

Hanafi, M.H.M and Wan Mahmood, W.M.F and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Nor, N.F.M and Zulfattah, Z. M. and Shamsudin, S.A and Ibrahim, A. (2013) Comparison of Soot Particle Movement based on Crank Angle. Procedia Engineering , 68. pp. 245-250. ISSN 1877-7058

Hanafi, Norshazwana Akmal (2013) ID defect minimization in glass substrate industry. Masters thesis, UTeM.

Hani Abdul Hakim , Abdul Kader (2013) Impact Of Kenaf Towards Enhancing Organizational Performance : A Study In Manufacturing Organization. Project Report. UTeM, Melaka. (Submitted)

Hanif, Asha'ri (2013) Design And Machining Of Aerospace Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanipah, Hussin (2013) Micro teaching for technical education. [Video] (Submitted)

Hanipah, Hussin (2013) Batik Lambang Warisan Dan Inovasi Tamadun Melayu. Inovasi Batik Malaysia Dalam Pendidikan Seni. pp. 1-12. ISSN - (Submitted)

Hanipah, Hussin (2013) Melestari Kajian Tindakan Guru Sarjana. In: Melestari Kajian Tindakan Guru Sarjana , 16/May/2013, Kolej Kemahiran Tinggi Mara Kuantan . (Submitted)

Hanipah, Hussin (2013) Reflection On Strategy Of Innovation. The Roles Of Premier Polytechnic. pp. 1-7. ISSN KPT.AKEPT. 680-3/1/49

Hanipah, Hussin and Anas, Abd Latiff (2013) Innovation and Creativity Showcase: “The Commercialization of Research Project and Intellectual Property Assets”. Project Report. AKePT.

Hanipah , Hussin (2013) Beberapa Pertimbangan Merancang Pengajaran. In: Merancang Pengajaran, 08/02/2013, UTeM.

Hanipah , Hussin (2013) Integrasi Amalan Refleksi Dalam Pendidikan Islam. In: Acheh Negoro-Integrasi Amalan Refleksi Dalam Pendidikan Berbasis Islam, 13/03/2013, UTeM.

Hanipah , Hussin (2013) Life success coach training & certification program. Project Report. Coaching For Success : Life Success Program. (Submitted)

Hanipah , Hussin (2013) Pedagogical Content Knowledge. [Teaching Resource] (Submitted)

Hanizam , Hashim (2013) Effect of in SITU DC and PDC substrate bias cleaning process on TiN coating adhesion in PVD system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hareshwara Ruban , Subramaniam (2013) Modelling For Prediction And Optimization Of Mechanical Response Of Unequal Thickness Steel Sheet Resistance Spot Welds In Tensile-Shear Loading Condition. Project Report. UTeM, Melaka. (Submitted)

Harindravel, Letchumanan (2013) Mobile Robot Surveillance System With GPS Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haron, Nor Zaidi and Fauziyah , Salehuddin and Norsuhaidah , Arshad and Zahriladha , Zakaria (2013) A New Test Scheme for Process Variation-Induced Faults in Resistive RAMs. Australian Journal of Basic and Applied Sciences. pp. 43-50. ISSN 1991-8178

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Shaari, Sahbudin and majlis , B.Y and Menon, P.S (2013) Design Parameters Investigation of Single Mode Silicon-on-Insulator (SOI) Microring Channel Dropping Filter. Advanced Science Letters, 19 (1). pp. 199-202. ISSN 1936-6612

Haroon, Hazura and Hanim , Abdul Razak and Mardiana, Bidin and Shaari, Sahbudin and Majlis, B.Y and Menon, P.S (2013) Effect of Design Parameter Variations on the Quality Factor of a Microring Resonator Filter. Advanced Science Letter, 19 (5). pp. 1398-1401. ISSN 936-6612

Haroon, Hazura and Sahbudin, Saari and Menon, P.S and Mardiana, Bidin and Hanim, Abdul Razak (2013) Application of statistical method to investigate the effects of design parameters on the performance of microring resonator channel dropping filter. INTERNATIONAL JOURNAL OF NUMERICAL MODELLING: ELECTRONIC NETWORKS, DEVICES AND FIELDS, 26. pp. 670-679. ISSN 1099-1204

Haroon, Hazura and Sahbudin, Saari and P. Susthitha, Menon and Abdul Razak, Hanim (2013) Application of Statistical Method to Investigate The Effects of Design Parameters on The Performance of Microring Resonator Channel Dropping Filter. INTERNATIONAL JOURNAL OF NUMERICAL MODELLING: ELECTRONIC NETWORKS, DEVICES AND FIELDS. pp. 670-679. ISSN 10.1002/jnm.1899

Harun, Mohamad Haniff (2013) A THREE DIMENSIONAL (3D) VISION BASED DEFECT INSPECTION SYSTEM FOR GLUING APPLICATION. Masters thesis, Universiti Teknikal Malaysia Melaka (UTeM).

Has, Zulfatman and Rahmat, Mohd Fua’ad and Husain, Abdul Rashid and Ishaque, Kashif and Ghazali, Rozaimi and Ahmad, Mohamed Noh and Md Sam, Yahaya and Md Rozali, Sahazati (2013) Robust Position Tracking Control of an Electro-Hydraulic Actuator in the Presence of Friction and Internal Leakage. Arab J Sci Eng. pp. 1-14. ISSN 1319-8025

Hasan, Ihsan Jabbar and Gan, Chin Kim and Shamshiri, Meysam and Ismadi , Bugis and Ab Ghani, Mohd Ruddin (2013) Losses Reduction and Voltage Improvement Using Optimum Capacitor Allocation by PSO in Power Distribution Networks. International Review on Modelling & Simulations. pp. 1219-1226. ISSN 1974-9821

Hasan, Ihsan Jabbar and Shamshiri, Meysam and Gan, Chin Kim and Ab Ghani, Mohd Ruddin and Bugis, Ismadi (2013) Optimal Capacitor Allocation in Distribution System using Particle Swarm Optimization. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013), 30-31 October, 2013, Melaka, Malaysia.

Hasan Basari, Abd Samad and Hussin, Burairah and Pramudya Ananta, Gede and Zeniarja, Junta (2013) Opinion Mining of Movie Review using Hybrid Method of Support Vector Machine and Particle Swarm Optimization. Procedia Engineering (53). pp. 453-462. ISSN 1877-7058

Hashim, N M Z and Ibrahim, N A and Saad, N M and Sakaguchi, F and Zakaria, Z (2013) Barcode recognition system. International Journal of Emerging Trends & Technology in Computer Science (IJETTCS), 2 (4). pp. 278-283. ISSN 2278-6856

Hashim, Nik Mohd Zarifie and Abdul Halim, Mohd Hazrin and Bakri, Hairul and Husin, Siti Huzaimah and Mohd Said, Muzalifah (2013) Vehicle Security System Using Zigbee. International Journal of Scientific and Research Publications, 3 (9). pp. 1-5. ISSN 2250-3153

Hashim, Nik Mohd Zarifie and Ali, Nur Alisa and Ja'afar, Abd Shukur and Mohamad, Najmiah Radiah and Salahuddin, Lizawati and Ishak, Noor Asryran (2013) Smart Ordering System via Bluetooth. International Journal of Computer Trends and Technology (IJCTT), 4 (7). pp. 2253-2256. ISSN 2231-2803

Hashim, Nik Mohd Zarifie and Hamdan, Nor Basyirah and Zakaria, Zahriladha and Hamzah, Rostam Affendi and Salleh, Azahari (2013) Flood Detector Emergency Warning System. International Journal Of Engineering And Computer Science , 2 (8). pp. 2332-2336. ISSN 2319-7242

Hashim, Nik Mohd Zarifie and Ja'afar, Abd Shukur and Ali, Nur Alisa and Salahuddin, Lizawati and Mohamad, Najmiah Radiah and Ibrahim, Mohd Afifi (2013) Traffic Light Control System for Emergency Vehicles Using Radio Frequency. IOSR Journal of Engineering (IOSRJEN), 3 (7). pp. 43-52. ISSN e-2250-3021, p-2278-8719

Hashim, Nik Mohd Zarifie and Jaafar, Ahmad Farid and Zakaria, Zahriladha and Salleh, Azahari and Hamzah, Rostam Affendi (2013) Smart Casing for Desktop Personal Computer. International Journal Of Engineering And Computer , 2 (8). pp. 2337-2342. ISSN 2319-7242

Hashim, Nik Mohd Zarifie and Mohamad, Nor Hafiza and Zakaria, Zahriladha and Bakri, Hairul (2013) Development of Tomato Inspection and Grading System using Image Processing. International Journal Of Engineering And Computer Science , 2 (8). pp. 2319-2326. ISSN 2319-7242

Hashim, Nik Mohd Zarifie and Mohd Arifin, Nor Azereen Mahmudah (2013) Laboratory Inventory System. International Journal of Science and Research (IJSR), 2 (8). pp. 261-264. ISSN 2319-7064

Hashim, Nik Mohd Zarifie and Nik Ibrahim, Nik Muhd Tasnim and Zakaria, Zahriladha and Bakri, Hairul (2013) Development New Press Machine using Programmable Logic Controller. International Journal Of Engineering And Computer Science, 2 (8). pp. 2310-2314. ISSN 2319-7242

Hashim, Nik Mohd Zarifie and Syed Mohamed, Sharifah Nur Khafiah (2013) Development of Student Information System. International Journal of Science and Research (IJSR), 2 (8). pp. 256-260. ISSN 2319-7064

Hashim, Nik Mohd Zarifie and Ali, Nur Alisa and Salleh, Azahari and Ja'afar, Abd Shukur and Zainal Abidin, Noor Azlin (2013) Development of Optimal Photosensors Based Heart Pulse Detector. International Journal of Engineering and Technology (IJET), 5 (4). pp. 3601-3607. ISSN e-0975-4024 ,p-2319-8613

Hashim, Nik Mohd Zarifie and Sizali, Muhammad Syahmi (2013) Wireless Patient Monitoring System. International Journal of Science and Research (IJSR), 2 (8). pp. 250-255. ISSN 2319-7064

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Khairul Anuar, Abd Rahman (2013) The Effect of Pulse DC and DC Substrate Bias during In Situ Cleaning PVD Process on Surface Roughness. The Effect of Pulse DC and DC Substrate Bias during In Situ Cleaning PVD Process on Surface Roughness, 53 (20 (10.101). pp. 562-568. ISSN 1877-7058

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Mohd Soufhwee, Abd Rahman (2013) Surface Energy and Crystallite Size Comparisons by Applying Direct Current and Pulse Direct Current on Substrate Bias in PVD Process. Surface Energy and Crystallite Size Comparisons by Applying Direct Current and Pulse Direct Current on Substrate Bias in PVD Process, 315 (doi:10). pp. 98-102. ISSN 1660-9336

Hashim, Nik Mohd Zarifie and Husin, Siti Huzaimah and Ja'afar, Abd Shukur and Abd Hamid, Nor 'Asyikin (2013) Smart Wiper Control System. International Journal of Application or Innovation in Engineering & Management (IJAIEM), 2 (7). pp. 409-415. ISSN 2319 - 4847

Hasoloan Haery, Ian Pieter and Muhammad Yuhazri, Yaakob (2013) Developing A Function Deployment And Tool For Employees And Product Quality Satisfacti Through Kano Method And Herzberg Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasrul, 'Nisham Rosly (2013) Mechanical characterization of mems piezoresistive microcantilever sensor for biosensing application (design and simulation). Masters thesis, UKM.

Hassan, Muhammad Zahir and Abdul Kudus, Syahibudil Ikhwan and Halid, Mohd Shazni and Abdul Manaf, Muhammad Zaidan (2013) Stability Analysis for Buoyancy UTeM’s Amphibious Hybrid Vehicle (AHV). International Journal of Mechanical Engineering applications Research – IJMEAR, 4 (E090). pp. 296-302. ISSN 2249- 6564

Hassan, Muhammad Zahir and Abdul Manaf, Muhammad Zaidan and Halid, Mohd Shazni and Alehan, Muhammad Nadzeer and Md Isa, Amjad Saddar (2013) UTeM`s Amphibious Hybrid Vehicle: Ride and Handling Analysis. Applied Mechanics and Materials, 393. pp. 354-359. ISSN 1662-7482

Hassan, Muhammad Zahir and Brooks, P.C. and Barton, D.C. (2013) 采用全联热-机械有限元模型计算盘式制动器尖叫声的预测工具 (A Predictive Tool to Evaluate Disk Brake Squeal Using A Fully Coupled Thermo--Mechanical Finite Element Model). Drive System Technique (传动技术), 27 (3). pp. 39-48. ISSN 1006-8244

Hassan, Muhammad Zahir and Md Isa, Amjad Saddar and Abdul Kudus, Syahibudil Ikhwan and Abdul Manaf, Muhammad Zaidan (2013) UTeM`s Amphibious Hybrid Vehicle: Development of Hybrid Electric Propulsion System. International Review of Mechanical Engineering, 7 (5). pp. 790-794. ISSN 1970-8734

Hassan, Muhammad Zahir and Razali, Muhammad Razil and Halid, Mohd Shazni (2013) Design and Development of Amphibious Hybrid Vehicle Body Structure. International Journal of Science and Research (IJSR). pp. 220-223. ISSN 2319-7064

Hassan, Muhammad Zahir and Zainal Ariffin, Haziq Irfan (2013) Development of Vehicle Blind Spot System for Passenger Car. Applied Mechanics and Materials, 393. pp. 350-353. ISSN 1662-7482

Hassan, Muhammad Zahir (2013) The evaluation of disc brake squeal propensity through a fully coupled transient thermomechanical model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (3). pp. 361-375. ISSN 0954-4070

Hassan, Muhammad Zahir and Ahmad, Fauzi and Aparow, Vimal Rau and HUDHA, Khisbullah (2013) Identification of Intelligent Controls in Developing Antilock Braking System. Journal of Advanced Manufacturing Technology, 7 (1). pp. 1-13. ISSN 1985-3157

Hassan, Muhammad Zahir and Alehan, Muhammad Nadzeer and Md Isa, Muhammad Fahmi and Abdul Manaf, Muhammad Zaidan (2013) Design, Analysis and Fabrication of Space Frame Chassis for Amphibious Hybrid Vehicle. International Journal of Engineering Sciences Research-IJESR. pp. 864-866. ISSN 2230-8504

Hassan, Muhammad Zahir and Md Isa, Muhammad Fahmi and Razali, Muhammad Razil and Abdul Manaf, Muhammad Zaidan (2013) Structure Analysis of Cast Iron for Dry Clutch of Amphibious Vehicle. International Journal of Engineering Trends and Technology (IJETT), 4 (5). pp. 1768-1771. ISSN 2231-5381

Hassan, Muhammad Zahir and Sakidin, Hamzah (2013) Working with supervisors. Other. Penerbit Universiti Teknikal Malaysia Melaka, UTeM.

Hassan, Nornikman and Ahmad, B. H. and Abd Aziz, M. Z. A. and Rahim, M. K. A. and Othman, A. R. (2013) Investigation of Minkowski Patch Antenna with Meander Line Split Ring Resonator (ML-SRR) Structure. In: 2013 7th Europen Conference on Antenna and Propagation (EuCAP), 8-12 April 2013, Gothenburg, Sweeden.

Hassan, Nornikman and Ahmad, B. H. and Abd Aziz, M. Z. A. and Othman, A. R. and Othman, M. A. (2013) Design Minkowski Shaped Patch Antenna with Rectangular Parasitic Patch Elements for 5.8 GHz Applications. In: 2013 IEEE SYMPOSIUM ON WIRELESS AND APPLICATIONS (ISWTA 2013), 22-25 SEPTEMBER 2013, KUCHING, SARAWAK.

Hassan, Nornikman and Ahmad, B. H. and Abd. Aziz, M. Z. A. and Othman, A. R. (2013) Rhombic Split Ring Resonator (R-SRR) Structure on Rectangular Patch Antenna Design. International Journal of Electronics and Computer Science Engineering, 2 (1). pp. 322-330. ISSN ISSN- 2277-1956

Hassan, Nornikman and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Zakaria, Zahriladha and Othman, Mohd Azlishah and Othman, Abdul Rani and Jusoff, Kamaruzaman and Jano, Zanariah (2013) Microstrip Patch Antenna with a Complementary Unit of Rhombic Split Ring Resonator (R-SRR) Structure. World Applied Sciences Journal 21(Special Issue of Engineering and Technology): 85-90, 2013, Specia. pp. 85-90. ISSN ISSN 1818-4952

Hassan Essa, M. Atbeja (2013) Development of framework for plastic bottle recycling technology in Melaka using Analytical Hierarchy Process. Masters thesis, UTeM.

Hazalifah , Zainal Abidin (2013) Tribological properties of waste vegetable oil biodiesel using-alkaline-based potassium hydroxide (KOH) catalyst. Project Report. UTeM, Melaka. (Submitted)

Hazwan Hasif, Hamdan (2013) The Effect Of Crude Oil To The Corrosion Properties Of Petroleum Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazwani, Hilmi (2013) Effect Of Mixing Ratio On The Mechanical Properties Of Polypropylene Composite. Project Report. UTeM, Melaka. (Submitted)

Hee, Shieh Li (2013) Improving Sensing System For Mailbox Monitoring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Helan Nor, Nurul Ain and Mohd Nasir, Mohamad Na'im and Sulaima, Mohamad Fani and Jaafar, Hazriq Izzuan and Ramani, Anis Niza and Wan Abdul razak, Intan Azmira (2013) Photometric measurement for LED roadway lighting at Kuala Lumpur – Karak Expressway. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 DECEMBER 2013, KUANTAN, PAHANG.

Heng , Seok Teik (2013) Design of a dynamic vibration absorber. Project Report. UTeM. (Submitted)

Herawan, Safarudin Gazali and Abdul Hakim, Rohhaizan and Ahmad Faris, Ismail and Mohammed, Ataur Rahman (2013) POWER PREDICTED FROM WASTE HEAT RECOVERY EXHAUST OF NATURAL ASPIRATED ENGINE. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Submitted)

Herawan, Safarudin Gazali and Ayob, Md Razali and Putra, Azma (2013) Characterization of activated carbons from Oil-palm-shell by CO2 activation with no holding carbonization temperature. The Scientific World Journal, 2013 ( (Articl). pp. 1-6. ISSN 1537-744X (Online)

Herawan, Safarudin Gazali and Putra, Azma and Yusof, Ahmad Anas (2013) Effect of CO2 Flow Rate on the Pinang Frond-Based Activated Carbon for Methylene Blue Removal. The Scientific World Journal, 2013 (545948). pp. 1-6. ISSN 1537-744X (Online)

Hidayat, Zainuddin (2013) Study of surface discharge behaviour at the oil-pressboard interface. Masters thesis, UTeM.

Hishammudin, Ahmad (2013) Development of raw materials storage management system for Japan-Malaysia Technical Institute. Masters thesis, UTeM.

Ho, Yih Hwa and Abdullah, S and Mokhtar, M.H (2013) Global positioning system (GPS) positioning errors modeling using Global Ionospheric Scintillation Model (GISM). In: Space Science and Communication (IconSpace), 2013 IEEE International Conference on , 1-3 July 2013 , Melaka.

Ho , Pei Nee (2013) The art of storytelling and video editing : what does it take for NGO's to educate public using short video effectively? Project Report. UTeM. (Submitted)

Husin, Siti Huzaimah and Hassan, M Y N and Hashim, Nik Mohd Zarifie and Yusop, Yusmarnita and Salleh, Azahari (2013) Remote temperature monitoring and controlling. International Journal for Advance Research in Engineering and Technology, 1 (8). pp. 40-47. ISSN 2320-6802

Husin, Siti Huzaimah and Ngahdiman, A A and Hashim, Nik Mohd Zarifie and Yusop, Yusmarnita and Ja'afar, Abd Shukur (2013) Home electrical appliances smart system. International Journal of Computer Science and Mobile Computing, 2 (9). pp. 85-91. ISSN 2320–088X

Hussein, Turki Diwan (2013) Laser processing of non-linear incline cutting. Masters thesis, UTeM.

Huzaifah, Mohd Fauzi (2013) Development wireless Radio Frequency Identification (RFID) connector to reduce the use of wire hamess in order to minimize frequents connection failure. Project Report. UTeM. (Submitted)

Huzairee, Abdul Halim (2013) Investigation Magnetic Field Radiated By 132 kV Overhead Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

I

I.M. , Mahbubul and S.A. , Fadhilah and R., Saidur and K.Y., Leong and M.A, Amalina (2013) Thermophysical properties and heat transfer performance of Al2O3/R-134a nanorefrigerants. International Journal of Heat and Mass Transfer, 57. pp. 100-108. ISSN 0017-9310

Ibrahim, Zulkifilie and Abu Hasim, Ahmad Shukri and Talib, Md Hairul Nizam and Mat Lazi, Jurifa and Mat Isa, Siti Noormiza and Mstafa, Raihana (2013) Performance Investigation Of Photovoltaic Grid Connection For Shunt Active Power Filter With Different PWM Generation. Journal of Theoretical and Applied Information Technology, 57 (2). pp. 305-312. ISSN 1992-8645

Ida Laila , Bakhtiar (2013) DFMA Analysis Of A Water Tank Cleaning Robot. Project Report. UTeM, Melaka. (Submitted)

Ida Syafiza, Md Isa (2013) Development Of New Arp Routing Protocol For Multihop Transmission In Ad Hoc IEEE 802.11 Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Fakrulradzi and Hashim, Norlezah (2013) Deployment and Evaluation of a Multi-Hop Wireless Network. International Journal of Computer Trends and Technology (IJCTT), 5 (2). pp. 80-83. ISSN 2231-2803

Idzuan, Ibrahim (2013) Network Optimization Of IKN. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ifayefunmi, Olawale (2013) Effect of prebuckling and edge support on bifurcation buckling of torisphere, cylinder and cone. Journal of Engineering and Technology, 4 (2). pp. 137-148. ISSN 2180-3811

Ifayefunmi, Olawale and Blachut, Jan (2013) Instabilities in imperfect thick cones subjected to axial compression and external pressure. Marine Structures, 33. pp. 297-307. ISSN 0951-8339

Iffa Marina , Jopri (2013) Effect of heat treatment on the microstructures and mechanical properties of high carbon steel. Project Report. UTeM, Melaka. (Submitted)

Ilham Hadi , Syahril (2013) Evaluation Of Dynamic Characteristics On PRT And Thermocouple Sensors In An Automated Temperature Calibration System. Project Report. UTeM, Melaka. (Submitted)

Imran, Ibrahim (2013) School Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran , Mohd Ibrahim and Tharek, Abdul Rahman (2013) A Study on Aperture Slot Size Effect to Wide Band Open Air Gap RLSA Performance. In: 2013 IEEE International RF and Microwave Conference (RFM2013),, 9 - 11 Dec 2013, Penang, Malaysia.

Intan Ermahani, A. Jalil and Muda, A. K. (2013) Geometrical Feature Based Ranking using Grey Relational Analysis (GRA) for Writer Identification. In: 2013 International Conference of Soft Computing and Pattern Recognition (SoCPaR), 15 - 18, Dec 2013, Vietnam.

Irwan, Saari (2013) Image Transmission Over Wireless Sensor Network (TEST BED ANALYSIS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa, Halim and Seri Rahayu , Kamat and Abdullah, Rohana and Hambali, Arif and Ab. Rahman , Mahmood (2013) Electromyography Analysis associated with Prolonged Standing In Metal Stamping Industry. Journal of Advanced Manufacturing Technology (JAMT) . pp. 15-26. ISSN 1985-3157

Isa , Halim and Seri Rahayu , Kamat and Syed mohamed, Muhammad syafiq and Mohd Shahrizan, Othman and Rohana , Abdullah (2013) Effects of Lifting Height, Twist Angle and Load mass on Psychophysical Experience, Muscle Activity and Heart Rate during Manual Lifting. Advanced Engineering Forum. pp. 245-250. ISSN 2234-991X

Isa , Halim and Syed Mohamed, Muhammad Syafiq (2013) An Overview of Ergonomics Problems Related to CNC Machining Operations. Advanced Engineering Forum. pp. 137-142. ISSN 2234-991X

Ismail, Jaaffar (2013) Design The Auto Depth Control For Unmanned Underwater Vehicle Control Using Thruster System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohd Muzafar and Che Hasan, Mohd Hanif and Mohamad, Syahrul Hisham and Jaafar, Hazriq Izzuan (2013) A Preliminary Study on Firefly Algorithm Approach for Travelling Salesman Problem. In: Science & Engineering Technology National Conference 2013, 3-4 July 2013, Kuala Lumpur, Malaysia..

Ismail, Mohd Muzafar and Shair, Ezreen Farina and Mohd Nor, Arfah Syahida and Mohd Shaari Azyze, Nur Latif Azyze and Mohd Karis, Safirin and Jaafar, Hazriq Izzuan and Mohamad, Syahrul Hisham (2013) A Preliminary Study on Solving Knight’s Tour Problem Using Binary Magnetic Optimization Algorithm. In: Science & Engineering Technology National Conference 2013, 3-4 July 2013, Kuala Lumpur, Malaysia..

Ismail , Ibrahim (2013) Motion And Time Study For Enhancing The Assembly Process At PHN Industry Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Ismatuzzulfa, Shahrowardi (2013) Compact Dual Band FSS For Microwave Transmission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ito, Teruaki and Mohamad, Effendi and Salleh, Mohd Rizal (2013) A Student Mobility Program through Cross Cultural and Technical Exposure. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Ivan, Gian (2013) Design Analysis Of High Heel Shoes To Improve Energy Absorption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izni Hidayah, Mohamed Asri (2013) A Study Of Car’s Profile Design Using Boxfish’s Aerodynamic Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzati , Ghasali (2013) Key Success Factors Of Entrepreneurship Education Towards Undergraduate Students Of Faculty Of Technology Management And Technopreneurship (FPTT). Project Report. UTeM, Melaka. (Submitted)

Izzul Hazwan , Amir (2013) Strengthening of aluminium alloy 6061 by using precipitation hardening heat treatment. Project Report. UTeM. (Submitted)

J

Ja'afar, Abd Shukur and Hashim, Nik Mohd Zarifie and Awang Md Isa, Azmi and Ali, Nur Alisa and Darsono, Abdul Majid (2013) Analysis of indoor location and positioning via Wi-Fi signals at FKEKK,UTeM. International Journal of Engineering and Technology (IJET), 5 (4). pp. 3570-3579. ISSN 0975-4024

Ja'afar, Abd Shukur and Hashim, Nik Mohd Zarifie and Awang Md Isa, Azmi and Ali, Nur Alisa and Darsono, Abdul Majid (2013) Analysis of indoor location and positioning via Wi-Fi signals at FKEKK,UTeM. International Journal of Engineering and Technology (IJET), 5 (4). pp. 3570-3579. ISSN 0975-4024

Jaafar, Hazriq Izzuan (2013) A Comparative Study of the Application of Swarm Intelligence in Kruppa-Based Camera Auto-Calibration. International Journal of Scientific & Engineering Research, 4 (5). pp. 56-60. ISSN 2229-5518

Jaafar, Hazriq Izzuan and Mohamed, Zaharuddin and Jamian, Jasrul Jamani and Zainal Abidin, Amar Faiz and Anuar , Mohamed Kassim and Ab Ghani, Zailani (2013) Dynamic Behaviour of a Nonlinear Gantry Crane System. In: The 4th International Conference on Electrical Engineering and Informatics (ICEEI 2013), 24 - 25 June 2013, Universiti Kebangsaan Malaysia (UKM), Malaysia.

Jaafar, Hazriq Izzuan and Mohamed, Zaharudin and Jamian, Jasrul Jamani and Zainal Abidin, Amar Faiz and Anuar, Mohamed Kassim and Ab Ghani, Zailani (2013) Dynamic Behaviour of a Nonlinear Gantry Crane System. Procedia Technology, 11. pp. 419-425. ISSN 2212-0173

Jaafar, Hazriq Izzuan and Mohd Ali, Nursabillilah and Mohamed, Zaharuddin and Selamat, Nur Asmiza and Zainal Abidin, Amar Faiz and Jamian, Jasrul Jamani and Anuar, Mohamed Kassim (2013) Optimal Performance of a Nonlinear Gantry Crane System via Priority-based Fitness Scheme in Binary PSO Algorithm. IOP Conf. Series: Materials Science and Engineering, 53. 012011. ISSN 1757-899X

Jaafar, Anuar and ARASID, NOORAISYAH and Hashim, Nik Mohd Zarifie and Abdul Latiff, anas and Abdul Rahim, Hazli Rafis (2013) THREE BIT SUBTRACTION CIRCUIT VIA FIELD PROGRAMMABLE. THREE BIT SUBTRACTION CIRCUIT VIA FIELD PROGRAMMABLE GATE ARRAY, 1 (9). pp. 1-13. ISSN 2320-6802

Jaafar, Anuar and Hamidon, Abdul Hamid and Anas, Abd Latiff and Hazli Rafis, Abdul Rahim and Mohd Yusof, Haziezol Helmi and Mohd Saad, Wira Hidayat (2013) Modelling of Swarm Communication. International Journal of Advance Research in Electrical, Electronics and Instrumentation Engineering, 2. pp. 3725-3731. ISSN 2278-8875

Jaafar, Hazriq Izzuan (2013) A Comparative Study of the Application of Swarm Intelligence in Kruppa-Based Camera Auto-Calibration. In: The 3rd Global Conference for Academic Research on Scientific and Emerging Technologies , 9-10 March 2013, Kuala Lumpur, Malaysia..

Jaafar, Hazriq Izzuan and Abdullah, Abdul Rahim and Anuar , Mohamed Kassim and Mohd Aras, Mohd Shahrieel and Mohd Nasir, Mohamad Na'im and Sulaima, Mohamad Fani (2013) Analysis of Optimal Performance for Nonlinear Gantry Crane System using MOPSO with Linear Weight Summation Approach. In: Malaysian Technical Universities Conference on Engineering & Technology, 3-4 December 2013, Kuantan, Pahang.

Jaafar, Hazriq Izzuan and Md Sani, Zamani and Anuar , Mohamed Kassim (2013) Performance Analysis for a Gantry Crane System (GCS) using Priority-based Fitness Scheme in Binary Particle Swarm Optimization. In: The 1st International Manufacturing Engineering Conference, 1-3 July 2013, Pahang, Malaysia..

Jaafar, Hazriq Izzuan and Mohd Ali, Nursabillilah and Mohamed, Zaharuddin and Selamat, Nur Asmiza and Anuar, Mohamed Kassim and Zainal Abidin, Amar Faiz and Jamian, Jasrul Jamani (2013) Optimal Performance of a Nonlinear Gantry Crane System via Priority-based Fitness Scheme in Binary PSO Algorithm. In: The 5th International Conference on Mechatronics (ICOM'13), 2-4 July 2013, Berjaya Times Square Hotel, Kuala Lumpur, Malaysia.

Jaafar, Hazriq Izzuan and Sulaima, Mohamad Fani and Mohamed, Zaharuddin and Jamian, Jasrul Jamani (2013) Optimal PID Controller Parameters for Nonlinear Gantry Crane System via MOPSO Technique. In: 2013 IEEE Conference on Sustainable Utilization and Development in Engineering and Technology, 30-31 May 2013, Selangor, Malaysia.

Jali, Mohd Hafiz and Hafez, Sarkawi and Tarmizi, Ahmad Izzuddin (2013) OBSERVER-BASED-CONTROLLER FOR INVERTED PENDULUM MODEL. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

Jali, Mohd Hafiz (2013) Design of Gain Booster for Sample and Hold Stage of High Speed-Low Power Pipelined Analog-To-Digital Converter. Journal of telecommunication, electronic and computer engineering , 5 (1). pp. 23-30. ISSN 2180-1843

Jamal, Norakmar (2013) The Effect of tempering temperatures on a fatigue of AISI 4130. Masters thesis, UTeM.

Jamaluddin, Muhammad Herman and Shimono, Tomoyuki and Motoi, Naoki (2013) Haptic Bilateral Control System with Visual Force Compliance Controller. The 22nd IEEE International Symposium on Industrial Electronics 2013. pp. 1-6. ISSN 2163-5137

Jamaluddin, Muhammad Herman and Shimono, Tomoyuki and Motoi, Naoki (2013) A Scaling Eect of Visual Force in Haptic Bilateral Control System. Industrial Instrumentation and Control (IIC2913) Technical Meeting. pp. 37-42. ISSN 1931-4981

Jameel Abbas, Adnan and Minhat, Mohamad and Abd. Rahman, Md. Nizam (2013) Improvement Performance Characteristics of CNC Turning Operation by Exploit Immune System's Properties. In: 2nd International Conference on Computer Engineering and Mathematical Sciences (ICCEMS2013), 5-6 December 2013, Kuala Lumpur, Malaysia.

Jamiatul Adawiah , Ab. Sidek (2013) Heat transfer characteristics of a heat exchanger. Project Report. UTeM, Melaka. (Submitted)

Jamli, Mohamad Ridzuan and Mohd Ihsan, Ahmad Kamal Ariffin and Abdul Wahab, Dzuraidah (2013) Integration of feedforward neural network and finite element in the draw-bend springback prediction. Expert Systems with Applications, 41. pp. 3662-3670. ISSN 0957-4174

Jamri , Mohd Saifuzam and Anuar , Mohamed Kassim (2013) Control of Maximum Power Point Tracking for Stand-Alone Photovoltaic System Using Voltage Comparison Technique. Australian Journal of Basic and Applied Sciences. pp. 229-236. ISSN 1991-8178

Jamri , Mohd Saifuzam and Anuar , Mohamed Kassim and Mohd Ruzaini, Hashim (2013) A Voltage Mode Control Maximum Power Point Tracking for Stand-Alone Photovoltaic System. Applied Mechanics and Materials , (Volum. pp. 503-507. ISSN 1662-7482

Janisa , Aldean (2013) Total Design Of A Portable Automation Training Kit. Project Report. UTeM, Melaka. (Submitted)

Jannatunnaim, Harun (2013) Monitoring systematic control system for electrode usage at EDM section. Masters thesis, UTeM.

Jariah, Mohamad Juoi and Zulkifli, Mohd Rosli and Toibah, Abd Rahim and Siti Rahmah, Shamsuri (2013) Physical and Mechanical properties of glass composite material made from incinerated scheduled waste slag and SLS waste Glass. Advanced Material Research. pp. 280-288. ISSN 1022-6680

Jaya, A. S. M. and Hashim, S.Z.M. and Haron, H. and Ngah, Razali and Muhamad, M.R. and Rahman, M. N. A. (2013) Modeling of ANFIS in predicting TiN coatings roughness. In: 5th International Conference on Computer Science and Information Technology (CSIT), 2013 , 27-28 March 2013, Amman.

Jaya Kumar, Yogan (2013) Using SVMs for Classification of Cross-Document Relationships. Pertanika Journal of Science & Technology, 21 (1). pp. 239-246. ISSN 0128-7680

Jaya Kumar, Yogan and Salim, Naomie and Abuobieda, Albaraa and Tawfik , Ameer (2013) Multi Document Summarization Based On Cross-Document Relation Using Voting Technique. In: International Conference on Computing, Electrical and Electronics Engineering (ICCEEE), 2013 , 26-28 August 2013, Khartoum, Sudan.

Jeefferie, Abd Razak and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of Polypropylene-Multiwalled Carbon Nanotubes (PP/MWCNTs) Nanocomposites via Direct Melt Compounding. Journal of Elastomer and Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

Jeeva, Kumar (2013) Investigate Android Malware’s Behaviour Through Dynamic Analysis (Anserverbot). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jidin, Auzani (2013) An Improved FPGA Implementation of Direct Torque Control for Induction Machines. IEEE Transactions on Industrial Informatics . pp. 1-10. ISSN 1551-3203

Jimmy , Saman (2013) Attaining Balanced Ecosystem By Going Green : The Relationships Between Trainer's Instructional Design And Behavior Of Trainer : A Study Case On Permai Rainforest Resort. Project Report. UTeM, Melaka. (Submitted)

Jordan, Keith Ogak (2013) Finite element simulation of a rolling process of aluminium. Project Report. UTeM, Melaka. (Submitted)

Joseph Rangga , Lium (2013) Design Improvements On Small Scale Production System. Project Report. UTeM, Melaka. (Submitted)

Joye, Ter Ji-Xi (2013) Object Locator For People With Dementia (DEMICATOR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juani Eyat, Ju Leng Jun (2013) Teaching Autism Kids Good Behavior Using 2D Animation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juhari, Ab. Razak (2013) Optimization Of Cross - Flow Turbine For Pico - Hydro System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juoi, J.M. and Arudra, D. and Rosli, Z.M. and Hussain, K. and Japper Jaafar , A (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. Journal Non-Crystalline Solids, 367 (1). pp. 8-13. ISSN 0022-3093

K

KOE, WEI LOON and Abdul Majid, Izaidin (2013) Sustainable Entrepreneurship among Small and Medium Enterprises (SMEs) in Malaysia. International Journal of Economics, Finance and Management. pp. 2307-2466. ISSN 2307-2466

KOE, WEI LOON and Abdul Majid, Izaidin (2013) Sustainable Entrepreneurship among Small and Medium Enterprises(SMEs) in Malaysia. In: National Research & Innovation Conference for Graduate Students in Social Sciences , 7-9 December 2012, Mahkota Hotel, Melaka.

Kadir, Abdul (2013) Buku Pintar Programmer Pemula PHP. Mediakom, Yogyakarta.

Kadir, Abdul (2013) Buku Pintar Programmer Pemula PHP. MediaKom, Yogyakarta. ISBN 978-979-877-346-4

Kadir, Abdul (2013) Dasar Pengolahan Citra dengan Delphi. Penerbit ANDI, Yogyakarta.

Kadir, Abdul (2013) From Zero to a Pro Delphi. Penerbit ANDI, Yogyakarta. ISBN 978-979-29-3468-7

Kadir, Abdul (2013) From zero to a Pro HTML5. Penerbit ANDI, Yogyakarta. ISBN 9789792935257

Kadir, Abdul (2013) Panduan Praktis Mempelajari Aplikasi Mikrokontroler dan Pemrogramannya Menggunakan Arduino. Penerbit ANDI, Yogyakarta. ISBN 978-979-29-4017-6

Kadir, Abdul (2013) Pengenalan Algoritma Pendekatan Secara Visual dan Interaktif Menggunakan Raptor. Penerbit Andi, Yogyakarta. ISBN 978-979-29-3524-0

Kadir, Abdul (2013) Teori dan Aplikasi Pengolahan Citra. Penerbit ANDI, Yogyakarta. ISBN 978-979-29-3430-4

Kadir, Abdul (2013) Teori dan Aplikasi Struktur Data Menggunakan C++. Penerbit ANDI, Yogyakarta. ISBN 978-979-29-3209-6

Kalaivani, Ramachandran (2013) Automated Control System For Tomato Plantation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati and Husain, Abdul Rashid (2013) Observer-Based Output Feedback Control with Linear Quadratic Performance. Procedia Engineering , 53. pp. 233-240. ISSN 1877-7058

Kamarudin, Muhammad Nizam (2013) Stabilization of Uncertain Systems using Backstepping and Lyapunov Redesign. In: The 4th International Graduate Conference on Engineering Science & Humanity (IGCESH2013), 16 Apr - 17 Apr 2013 , Johore, Malaysia.

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati and Husain, A.Rashid (2013) Observer-Based Output Feedback Control With Linear Quadratic Performance. Procedia Engineering , 53 (-). pp. 233-240. ISSN 1877-7058

Kamarul Hisyam , Muhamad (2013) Evaluation of diesel engine performance and emissions using blended biodiesel (waste chicken fat) and conventional diesel. Project Report. UTeM, Melaka. (Submitted)

Kamarulhelmy , Talib (2013) Optimization Of Mechanical Coupling In Electric Vehicle (ev). Project Report. UTeM, Melaka. (Submitted)

Kamat, Seri Rahayu and Norhidayah, Hashim and Mohd Shahrizan, Othman (2013) A Study on Muscle Fatigue Associated with Awkward Posture among Workers in Aerospace Industry. Advanced Materials Research Journal, 10. pp. 287-292. ISSN 1022-6680

Kanchymalay, kasturi and Amiruddin, Syuria and Salam, Sazilah and Hashim, Ummi Rabaah (2013) The Extent of ERP Customization towards User Satisfaction in Daily Operation for Manufacturing Companies. Journal of Computes, 8 (7). pp. 7888-7892. ISSN ISSN 1796-203X

Kang , Wei Sheng (2013) Universal Remote Control For Home Appliance With Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kaodawaton, Abd Malik (2013) The Interpretation Of Dissolved Gas Analysis (DGA) Using Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kartikesu, Vijayan (2013) The Design Of A Torque Feedback Controller Using PID Controller For An Upper Limb Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, Mohd Shahir (2013) Surface Integrity of Newly Developed of Alsi/AlN Metal Matrix Composite during End Milling Under Dry Cutting Conditions. Research Journal of Applied Sciences, Engineering and Technology, 6 (6). pp. 1129-1134. ISSN 2040-7467

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Cutting Performances of Coated PVD in High Speed End Milling of Aged Inconel 718. Materials Science Forum, 773-774. pp. 653-660. ISSN 1662-9752

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) PREDICTION SURFACE ROUGHNESS IN HIGH-SPEED MILLING OF INCONEL 718 UNDER MQL USING RSM METHOD. Middle-East Journal of Science Research, 13 (3). pp. 264-272. ISSN 1990-9233

Kasim, Mohd Shahir (2013) Comparison between Taguchi Method and Response Surface Methodology (RSM) In Optimizing Machining Condition. In: UNSPECIFIED.

Kasim, Mohd Shahir (2013) Comparison between up-milling and down-milling operations on tool wear in milling Inconel 718. Procedia Engineering, 68. pp. 647-653. ISSN 18777058

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718. Wear, 302 (1-2). pp. 1171-1179. ISSN 0043-1648

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Che Hassan, Che Haron and A.G., Jaharah and A.I, Gusri and Abdul Yazid, Mohd Zaid (2013) Tool Life of TiAlN PVD Coated Carbide Tool in High-speed End Milling of Untreated Inconel 718 under Minimum Quantity Lubrication Condition. Sains Malaysiana, 42 (12). pp. 1721-1726. ISSN 0126-6039

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Md. Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohamad, Noraiham and Raja, Izamshah (2013) Prediction of Cutting Force in End Milling of Inconel 718. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3-4 December 2013, Kuantan, Pahang. (Submitted)

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH (2013) Assessment of environmental friendly application of biodegradable MQL coolant in end milling of Inconel 718. In: 16th Conference of the European Roundtable on Sustainable Consumption and Production (ERSCP), 4-7 June 2013, Istanbul, Turki.

Kew, Mun Yew (2013) Development of Glove Controlled Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Amzar , Mohd Kassim (2013) Design and fabrication of thrower mechanism for tennis ball machine. Project Report. UTeM, Melaka. (Submitted)

Khairul Nizam, Kamaruddin (2013) Solar Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulannuar, Abdul Satar (2013) Parabolic Dish Stirling Engine With Single Axes Solar Tracker System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khaled Alarbi, B. Hamza (2013) Development of framework for aluminum recycling management using Analytical Hierarchy Process. Masters thesis, UTeM.

Khalil Rushdi, Abdul Ghafar (2013) Pressure Monitoring System Interfaced With Global System For Mobile Communication (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khamis, Aziah (2013) An Effective Islanding Detection and Classification Method Using Neuro-Phase Space Technique. WASET. pp. 1222-1229. ISSN 2070-3724

Khamis, Aziah (2013) An Effective Islanding Detection and Classification Method Using Neuro-Phase Space Technique. World Academy of Science, Engineering and Technology 78 2013, 78. pp. 1221-1229. ISSN (p-ISSN : 2010-376X ; e-ISSN : 2010-3778)

Khamis, Aziah (2013) Estimation of Real Power Transfer Allocation Using Intelligent Systems. WASET. pp. 1231-1238. ISSN 2070-3724

Khamis, Aziah (2013) Estimation of Real Power Transfer Allocation Using Intelligent Systems. In: World Academy of Science, Engineering and Technology, 27-28 July 2013, Holiday Inn, Hotel Paris.

Khamis, Aziah (2013) Estimation of Real Power Transfer Allocation Using Intelligent Systems. World Academy of Science, Engineering and Technology 78 2013, 78. pp. 1230-1238. ISSN (p-ISSN : 2010-376X ; e-ISSN : 2010-3778)

Khamis, Aziah (2013) A review of islanding detection techniques for renewable distributed generation systems. RENEWABLE & SUSTAINABLE ENERGY, 28. pp. 483-493. ISSN 1364-0321

Khamis, Aziah and H, Shareef (2013) An Effective Islanding Detection and Classification Method Using Neuro-Phase Space Technique. In: World Academy of Science, Engineering and Technology, 27-28 July 2013, Holiday Inn, Hotel Paris.

Kho , Wei Lip (2013) Mobile chinese dictionary application enhanced with augmented reality (AR) : WORDAR. Project Report. UTeM. (Submitted)

Khoo, Thean Heng (2013) Emergency Vehicle Siren Detection For Traffic Light Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Hooi Khee (2013) Disturbance Observer-Based Motion Control Of Direct Drive Motors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khor, Shuin Chin (2013) Tyre trading management system. Project Report. UTeM. (Submitted)

Khushairi, N. M and Nurul A., Emran and Yusof, M. M. M. (2013) Database Performance Tuning Methods for Manufacturing Execution System. In: INTERNATIONAL CONFERENCE ON INNOVATION CHALLENGES IN MULTIDISCIPLINARY RESEARCH AND PRACTICE (ICMRP 2013), 13-14 DECEMBER 2013, KUALA LUMPUR MALAYSIA.

Kismera , Mohamed Amin (2013) Radiator cleaning equipment. Project Report. UTeM, Melaka. (Submitted)

Koay, Soon Lee (2013) Investigating DroidKungfu4 Android Malware Behavior Through Dynamic Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong (2013) Piezoelectric Sensing Application Focused On Accelerometer Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong (2013) Wireless Monitoring For Ambient Vibrations: Investigate Potential Ambient Vibration Source For Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Si Mun (2013) Web-Database System For Health Insurance Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Wei Shen (2013) Design And Fabrication Of A Reduced Scale Tire Test Machine. Project Report. UTeM, Melaka. (Submitted)

Kow, Kok Lim (2013) Development Of Active Suspension For Passenger Car. Project Report. UTeM, Melaka. (Submitted)

khaksar, w. and tang, s.h. and motlagh, o. (2013) a genetic-based fuzzy-tabu controller for mobile robot randomised navigation in unknown environment. international journal of innovative computing information and control. xx-xx. ISSN xxxx-xxxx

L

Lai, Qili (2013) Development Of Four Wheel Steering For Vehicle Handling Enhancement. Project Report. UTeM, Melaka. (Submitted)

Lau, Kok-Tee (2013) Effect of Charging Agents on Electrophoretic Deposition of Coarse Titanium Particles. Journal of The Australian Ceramic Society Volume 49[2], 2013, 108 – 115, 49 (2). 108 - 115. ISSN ISSN 0004-881X

Lee, Kin Fei (2013) A Comparison Of Type-1 Fuzzy And Type-2 Fuzzy Methods In Anfis Modelling To Analyze FTSE Bursa Malaysia Kuala Lumpur Composite Index. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kin Wai (2013) Electrical Power Consumption Monitoring System And Computing Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kok Tai (2013) Modeling, Simulation And Validation Of Reduced Scale Vehicle Dynamics Model. Project Report. UTeM, Melaka. (Submitted)

Lee, Yeat Fui (2013) The Effectiveness Of Delivery System And Product Information In Web To Increase Electronic Sales In Tesco Melaka. Project Report. UTeM, Melaka. (Submitted)

Lee, Yee Fong (2013) Reconfigurable Feed Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Zhong Zhen and Choo, Yun Huoy and Muda, Azah Kamilah and Abraham, Ajith (2013) Forecasting FTSE Bursa Malaysia KLCI Trend with Hybrid Particle Swarm Optimization and Support Vector Machine Technique. In: 2013 World Congress on Nature and Biologically Inspired Computing (NaBIC), 12-14 Aug. 2013, Fargo, USA.

Leong, Shu Teng (2013) Performance Analysis Of Mineral Fibre Reinforced Polypropylene. Project Report. UTeM, Melaka. (Submitted)

Leong, Man Hong (2013) Bluetooth Remote Home Automation System Using Windows And Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leow, Thing Fung (2013) Satellite Image Classification Using Fuzzy Logic Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leza, F. N. M. and Nurul A., Emran and Ghani, M.K. A. (2013) Data Accessibility Model Using QR Code For Lifetime Healthcare Records. In: INTERNATIONAL CONFERENCE ON INNOVATION CHALLENGES IN MULTIDISCIPLINARY RESEARCH AND PRACTICE (ICMRP 2013), 13-14 DECEMBER 2013, KUALA LUMPUR MALAYSIA.

Lia Asmira, Abdul Halim (2013) Three-Phase Balanced Voltage SAGS Mitigation By Using Voltage Compensator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lie, , Ken Nie (2013) The rolling effect in mechanical properties of 316L stainless steel for implant materials. Project Report. UTeM, Melaka. (Submitted)

Liew, Jyi Haow (2013) Visualeyes : An Interactive Learning Tool To Ameliorate 3D Animation Skills Refining And Promote Self-Learning For Novice Animators. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Kean Fei (2013) Design Of A Comfortable Bus Passenger Seat. Project Report. UTeM, Melaka. (Submitted)

Liew, Sheau Ping (2013) Implementation Of Network Communication For Utility Pole Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Siaw Hong (2013) EEG Signal Classification Using Fuzzy-Rough Nearest Neighbours (FRNN) Model For Person Authentication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Pay Jun (2013) Micro electrical discharge machining of reaction-bonded silicon carbide. PhD thesis, UTeM.

Liew , Pay Jun and Shimada, Keita and Mizutani, Masayoshi and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining. International Journal of Automation Technology. pp. 621-629. ISSN 881-7629

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide. Journal of Materials Processing Technology. pp. 1076-1087. ISSN 0924-0136

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide. Applied Surface Science. pp. 731-743. ISSN 0169-4332

Liew , Siaw Hong and Choo, Yun Huoy and Low, Yin Fen (2013) Fuzzy-Rough Nearest Neighbour Classifier for Person Authentication using EEG Signals. In: International Conference on Fuzzy Theory and Its Application, Dec. 6-8, 2013, Taipei, Taiwan.

Lim, Nicholas Boon Yew (2013) Automatic Fall Detection And Notification System Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chee An (2013) Ironman Project - Design Of Electro-Mechanical Muscle For Elbow Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Da Ping (2013) Simulation And Measurement For Indoor Air Flow. Project Report. UTeM, Melaka. (Submitted)

Lim, Jia Yin (2013) Automatic Crash Notification Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kar Yie (2013) Exploration On ZigBee In Wireless Body Area Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Si Qing (2013) Design And Analysis Of Natural Fiber-Metal Matrix Composites For Engineering Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Wan Xi (2013) Reconfigurable Slot Antenna For Dual Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Wei Jun (2013) Care Money Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Ching Sheng (2013) Railway Vehicle Dynamics And Vibration Analysis. Project Report. UTeM, Melaka. (Submitted)

Liyana, Muhamad Ali (2013) The Effect Of Colouring Agent On The Corrosion Properties Of Glass Composite Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liz Sharaziman , Ramli (2013) E-commerce And M-Commerce : Awareness And Acceptance Among Malay Entrepreneurs In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Lo, Chun Ho (2013) Mykids Portfolio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Mun Chui (2013) Performance Analysis Of Mineral Fibre Reinforced Polyethylene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, , Xiao Hui (2013) Effect of heat treatment on hardness and impact strength of stainless steel. Project Report. UTeM, Melaka. (Submitted)

Loo, Lok Siang (2013) e-FireXIT - A Smart Route Decision Making System To Emergency Exit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Looi , Jia Wei (2013) Care U Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lourdes Victor Raj, Logan Raj and Jidin , Auzani and Abdul Karim, Kasrul and Sutikno, Tole and Sundram, Ramahlingam and JOPRI, MOHD HATTA (2013) Improved Torque Control Performance of Direct Torque Control for 5-Phase Induction Machine. International Journal of Power Electronics and Drive System (IJPEDS). pp. 391-399. ISSN 2088-8694

Lourdes Victor Raj, Logan Raj and Jidin , Auzani and Che Wan Mohd Zalani, Che Wan Mohd Faizal and Abdul Karim, Kasrul and Goh, Wee Yen and Jopri, M.H (2013) Improved Performance of DTC of Five-Phase Induction Machines. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Lourdes Victor Raj, Logan Raj and Jidin , Auzani and Ibrahim, Zulkifli and Abdul Karim, Kasrul and Said, Mohamed Azmi and JOPRI, MOHD HATTA (2013) Optimal Torque Control Performance of DTC of 5-Phase Induction Machine. In: 2013 International Conference on Electrical Machines and Systems (ICEMS) - IEEE, 26-29 October 2013, Busan, Korea.

Low, Siew Yi and Gan, Chin Kim (2013) The Impact of Losses in Cable Selection for Distribution Circuit in Malaysia. In: 2013 IEEE 7th INTERNATIONAL POWER ENGINEERING AND OPTIMIZATION CONFERENCE, 3-4 Jun 2013, Bayview Hotel Langkawi.

Low , Jun Keat (2013) Investigating golddream android malware behavior through dynamic analysis. Project Report. UTeM. (Submitted)

Loy, Soo Ling (2013) Satellite image compression using run-length encoding and huffman encoding techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lukar Herlino, Adeline and Jidin, Auzani and Che Wan Mohd Zalani, Che Wan Mohd Faizal and Sanusi, Syamim and Jopri, M.H and Manap, Mustafa (2013) Comparative Study of Current Control Strategy for DC Motors. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Lukar Herlino, Adeline and Jidin , Auzani and Che Wan Mohd Zalani, Che Wan Mohd Faizal and Sanusi, Syamim and JOPRI, MOHD HATTA and Manap, Mustafa (2013) Comparative Study of Current Control Strategy for DC Motors. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Lukman Bayasut, Bilal and Pramudya Ananta, Gede and Basiron, Halizah (2013) ULUL-ILM : The Design of Web-Based Adaptive Educational Hypermedia System Based on Learning Style. In: 13th International Conference on Intelligent Systems Design and Applications (ISDA), 8-10 December 2013, Kuala Lumpur. (Submitted)

Lum, YipHing and Shaaban, Azizah and Mitan, NonaMerryM. and Dimin, MohdFairuz and Mohamad, Noraiham and Hamid, Nadiah and Se, SianMeng (2013) Characterization of Urea Encapsulated by Biodegradable Starch-PVA-Glycerol. Journal of Polymers and the Environment, 21 (4). pp. 1083-1087. ISSN 1566-2543

lIyana , Abdullah (2013) System performance evaluation through preventive maintenance scenarios using simulation technique. Masters thesis, UTeM.

M

M, Siti rahmah and M. Rus, Anika Zafiah and Din, Abdul Talib and T.M.Y.S., Tuan Ya (2013) Mechanical Properties of UV Irradiated Bio Polymer Thin Films Doped With Titanium Dioxide. Advanced Materials Research Journal, 748 (118.10). pp. 165-169. ISSN 10.4028

M. H. , Jusoh and Fauzal Naim , Zohedi and Jali, Mohd Hafiz (2013) A SIMULATION STUDY OF STATE-FEEDBACK CONTROL METHOD FOR ELECTRO HYDRAULIC SERVO MODEL. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

M. Napiah, Z. A. F. and Noor Haffizah , Ramli (2013) Design 4-to-1 multiplexer using universal gate with standard process technology. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 5 (1). pp. 15-21. ISSN 2180-1843

M.A., Burhanuddin and Adi, Fauzi (2013) SIri Mudah Membangun Aplikasi Telefon Bimbit : Tip & Trik Flash Lite. 1, 1 (1). Venton Publishing (M) Sdn. Bhd., Malaysia. ISBN 1

M.A.H., M.Nazri and Jali, Mohd Hafiz and Hafez , Sarkawi (2013) Real-Time Optimal Control Technique of A Rotary Inverted Pendulum System. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

MOHD HANAFI, MOHA HANAFI and ABDULLAH, MOHD FADZLI and Saleman, Abdul Rafeq and MOHD NOR, NUR FATHIAH and Shamsuddin, Shamsul Anuar (2013) Comparison of Soot Particle Movement Based on Crank Angle. Procedia Engineering . pp. 245-250. ISSN 1877-7058

Magaswaran, K. and Phuman Singh, A.S. and Hassan, Muhammad Zahir (2013) An Analytical Model to Identify Brake System Vibration within the Low Frequency Domain. SAE International , SAE Technical Paper 2013-01-2033. pp. 1-8. ISSN 0148-7191

Mahanum, Mohd Zamberi and Nortazi, Sanusi and Ernie, Mat Tokit and Zakiah, Abd Halim and Mohd Azli, Salim (2013) The Importance Of Industrial Training Program Towards Students Holistic Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maharof, Madihah (2013) A study on agv battery performance affecting factors in manufacturing environment. Masters thesis, UTeM.

Mahmood, Raed Abdulameer (2013) Effect of heat treatment on low carbon steel. Masters thesis, UTeM.

Mahmood, Raed Abdulameer (2013) Effect of heat treatment on low carbon steel corrosion behavior. Masters thesis, UTeM.

Maisarah, Abu Bakar Assari (2013) Eco Saver Mower (ESM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maisarah, Abu (2013) Designing Artifical Magnetic Conductor Using Bendable Substrate For RFID Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Majid, Rosmiza (2013) Ergonomic risk factors in material handling for warehouse operations. Masters thesis, UTeM.

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Edi Syams, Zainudin and Abd Aziz, Nuraini and Ariff, Hambali (2013) Stiffness Prediction of Hybrid Kenaf/Glass Fiber Reinforced Polypropylene Composites using Rule of Mixtures (ROM) and Rule of Hybrid Mixtures (RoHM). Journal of Polymer Materials, 30 (3). pp. 321-334. ISSN 0973-8622

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Ariff, Hambali (2013) Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design. Materials and Design, 51. pp. 484-492. ISSN 0261-3069

Mardiana, Bidin and Sahbudin, Saari and Menon, P.S and Haroon, Hazura and Hanim , Abdul Razak and N., Arsad and H., Abdullah (2013) Optimizing the Modulation Efficiency of Silicon-on-Insulator-Based Optical Phase Modulator. Advanced Science Letters, 19 (2). pp. 543-546. ISSN 1936-6612

Marhazli , Kipli (2013) Traffic (routing and auto-tracking) subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Mariam Naaila, Md Hanapi (2013) Measuring Using Augmented Reality Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marina, Anna and Wahjono, Sentot Imam (2013) Business ethics as a basis for designing the vision and mission hospitals: empirical evidences from Muhammadiyah Hospital Ponorogo, Indonesia. Journal of Economics, Business, and Accountancy Ventura, 16 (3). pp. 399-408. ISSN 2087-3735

Mark , Fidelis Kensin (2013) Voice Recognition Ignition System. Project Report. UTeM, Melaka. (Submitted)

Masni-Azian, Akiah and Choudhury, Imtiaz Ahmed and Haeryip , Sihombing and Yuhazri, Yaakob (2013) Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray. Advanced Materials Research, 626. pp. 542-546. ISSN 978-3-03785-571-3

Masripan, Nor Azmmi and Yuki , Miyahira and Hidenori, Nishimura and Takayuki, Tokoroyama and Noritsugu , Umehara and Yoshio, Fuwa (2013) Effect of Transfer Layer on Ultra Low Friction of CNx Coating under Blowing Dry Ar. Tribology Online. pp. 219-226. ISSN 1881-2198

Masripan, Nor Azmmi and Ohara , Kenji and Umehara, Noritsugu and Kousaka, Hiroyuki and Tokoroyama, Takayuki and Inami, Shigeru and Zushi, Koji and Fujita, Masahito (2013) Hardness Effect Of DLC On Tribological Properties For Sliding Bearing Under Boundary Lubrication Condition In Additive-Free Mineral Base Oil. Tribology International, 65. pp. 265-269. ISSN 0301-679X

Mastura, Roni and Juhaini, Jabar and Mariana, Yusoff and Mohd Razali, Muhamad (2013) Economic, social and environmental impact of sustainable manufacturing: a Conceptual Study. In: The 10th Asian Academy of Management International Conference 2013, 23 Aug - 25 Aug 2013, Batu Feringgi, Penang, Malaysia.

Mat, Zamzury (2013) Development of sustainable material selection for automotive bumper fascia using analytical hierarchy proses (AHP). Masters thesis, UTeM.

Mat Ali, Noraini and Mustapha, Ain Atiqa and Kok, Swee Leong (2013) DC-DC Circuit Analysis for Harvesting Energy Using Piezoelectric and Electromagnetic Micro-Generators. In: 2nd International Conference on Advances in Electronic Devices and Circuits (EDC 2012), 5 May 2013, Kuala Lumpur.

Mat Ali, Noraini and Mustapha, Ain Atiqa and Kok, Swee Leong (2013) Investigation of Hybrid Energy Harvesting Circuits Using Piezoelectric and Electromagnetic Mechanisms. In: IEEE SCOReD 2013, 16 - 17 December 2013, Putrajaya.

Mat Ibrahim, Masrullizam and Soraghan, John J. and Petropoulakis, Lykorgous (2013) Mouth covered detection for yawn. In: International Conference on Signal and Image Processing Applications (lCSIPA), August 2013, Melaka.

Mat Yamin, Ahmad Kamal and Benjamin, S. F. and Roberts, C. A. (2013) Pulsating flow in a planar diffuser upstream of automotive catalyst monoliths. International Journal of Heat and Fluid Flow, 40 (2013). pp. 43-53. ISSN 0142-727X

Mazidah, Mazri (2013) Effect Of Thickness On Mechanical Properties Of Plywood Honeycomb Core. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazizi , Mohamed (2013) Emisi prestasi enjin diesel menggunakan campuran biodiesel sawit dengan bahan aditif sebagai bahan api. Project Report. UTeM, Melaka. (Submitted)

Md Afindi, Muhammad (2013) Fabrication And Characterizations Of Hydroxyapatite (HA) / Chitosan (CTS) Composite Layer Onto Titanium Alloy (Ti-6AL-4V) Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali, Mohd Amran and M., Samsul and HUSSEIN, NUR IZAN SYAHRIAH and Mohd Rizal , Salleh and Raja Izamshah , Raja Abdullah and Mohd , Hadzley and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Sivarao, Subramonian (2013) The Effect of Edm Die-sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method. Middle-East Journal of Scientific Research. pp. 44-50. ISSN 1990-9233

Md Ghazaly, Mariam and Mohd Ali, Nursabilillah and Mohd Sobran, Nur Maisarah and Ab. Shukur, Syahar Azalia and Tuani Ibrahim, Ahmad Fayeez (2013) Individual Processing Speed Analysis for Traffic Sign Detection and Recognition. In: the IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 26-27 November 2013, Kuala Lumpur, Malaysia..

Md Ghazaly, Mariam and Sato, Kaiji (2013) Characteristic switching of a multilayer thin electrostatic actuator by a driving signal for an ultra-precision motion stage. Precision Engineering. pp. 107-116. ISSN http://dx.doi.org/10.1016/j.precisioneng.2012.07.005

Md Isa, Ida Syafiza and Syed Ariffin, Dr Sharifah Hafizah and Abdul Latif, Prof Norsheila and Mohd Shaari Azyze, Nur Latif Azyze and Tuani Ibrahim, Ahamed Fayeez (2013) Multi Hop Transmission in IEEE 802.11 Low Rate Ad Hoc Network Using ARP-Route. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , Vol. 5 (No. 1). pp. 1-8. ISSN 2180-1843

Md Isa, Ida Syafiza and Balakrishnan, Sopna and Mohd Shaari Azyze, Nur Latif Azyze and Tuani Ibrahim, Ahamed Fayeez (2013) Performance Analysis On Multihop Transmission Using ARP Routing Protocol In IEEE 802.11 Ad Hoc Network. International Journal of Research in Engineering and Technology (IJRET), 02 (07). pp. 175-182. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Md Nor, Nor Hafizah and Sapar, Ahmad Farid and Ramani, Anis Niza and Shamshiri, Meysam and Gan, Chin Kim (2013) A REVIEW ON MICRO-GRID AND DEMAND SIDE MANAGEMENT AND THEIR RELATED STANDARDS. In: Power and Energy Conversion Symposium (PECS 2012), 17th December 2012, Faculty of Electrical Engineering.

Md Rozali, Sahazati and Kamarudin, Muhammad Nizam and Rahmat, Mohd Fua'ad and Husain, Abdul Rashid (2013) Asymptotic Tracking Position Control for Nonlinear Systems using BacksteppingTechnique. Procedia Engineering , 53. pp. 255-263. ISSN 1877-7058

Md Rozali, Sahazati and Kamarudin, Muhammad Nizam and Rahmat, Mohd Fua'ad and Husain, Abdul Rashid and Zainal Abidin, Amar Faiz (2013) Controller Design for Position Tracking of Nonlinear System. 2013 8th IEEE Conference on Industrial Electronics and Applications. pp. 173-177. ISSN 978-1-4673-6322-8/13

Md Saad, Mohd Shamsuri and Robani, Anidah and Jano, Zanariah and Abdul Majid, Izaidin (2013) Employers’ perception on engineering, information and communication technology (ICT) students’ employability skills. Global Journal of Engineering Education, 15 (1). pp. 42-46. ISSN 50 135 362 319

Md Saat, Mohd Shakir (2013) ROBUST STATE FEEDBACK CONTROL OF UNCERTAIN POLYNOMIAL DISCRETE-TIME SYSTEMS: AN INTEGRAL ACTION APPROACH. International Journal of Innovative Computing, Information and Control (IJICIC). pp. 1233-1244. ISSN 1349-4198

Md Saat, Mohd Shakir (2013) Robust Nonlinear H ∞ State Feedback Control of Polynomial Discrete-Time Systems: An Integrator Approach. Circuits, Systems, and Signal Processing, Volume 33 (2). pp. 331-346. ISSN 1531-5878

Md Saat, Mohd Shakir and Nguang, Sing Kiong (2013) Nonlinear H infinity output feedback control with integrator for polynomial discrete-time systems. International Journal of Robust and Nonlinear Control. pp. 1-10. ISSN 1099-1239

Md Saat, Mohd Shakir (2013) Nonlinear state feedback control for a class of polynomial nonlinear discrete-time systems with norm-bounded uncertainties: An integrator approach. Journal of The Franklin Institute. pp. 1739-1752. ISSN 0016-0032

Megat Ahmad Haziq, Ahmad Zabidi (2013) Reprocessing Waste Tyre For New Product Potential. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Milad, Ali Ahmad and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Algaet, Mustafa Almahdi (2013) Reverse Direction Transmission in Wireless Networks: Review. Middle-East Journal of Scientific Research. pp. 767-778. ISSN 1990-9233

Mines, R.A.W and Tsopanos, S. and Shen, Y. and Rafidah, Hasan and McKown, S.T. (2013) Drop weight impact behaviour of sandwich panels with metallic micro lattice cores. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 60. pp. 120-132. ISSN 0734-743X

Minhat, Mohamad (2013) CNC Machine System Via STEP-NC Data Model and Lab VIEW Platform for Milling Operation. In: 2013 IEEE Conference on Open Systems (ICOS), December 2-4, 2013, Sarawak, Malaysia.

Minhat, Mohamad (2013) ADVANCED MANUFACTURING: TECHNOLOGY REVIEW ON THE FABRICATION OF AN AIRCRAFT COMPONENT (FISH-HEAD). In: National Conference on Engineering Technology 2013, 1 - 2 July 2013, Shah Alam Convention Centre (SACC, 1 - 2 July 2013, Shah Alam Convention Centre (SACC). (In Press)

Minhat, Mohamad and Abd. Rahman, Md Nizam (2013) A mild steel shear zone temperature minimization using genetic algorithm and direct search toolbox in cnc turning operation. International Review of Mechanical Engineering, 7 (1). pp. 38-45. ISSN 1970-8734 (In Press)

Mirasukma, Razak (2013) Factors influencing tourist's loyalty : Melaka River Cruise. Masters thesis, UTeM.

Mohamad, Effendi and Teruaki, Ito and Yuniawan, Dani (2013) Lean Manufacturing Tools Training System. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 Nov 2013, Kitakyushu, Japan.

Mohamad, Noraiham and Zainol, Nur Sharafina and ABD RAZAK , JEEFFERIE (2013) MORPHOLOGICAL & MECHANICAL PROPERTIES OF POLYPROPYLENE/EPOXIDIZED NATURAL RUBBER THERMOPLASTIC VULCANIZATES TREATED WITH MALEIC ANHYDRIED-GRAFTED POLYPROPYLENE. In: International Conference on Mechanical Engineering Research, 1-3th July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

Mohamad, Effendi (2013) Characteristic Mapping Of Overall Equipment Effectiveness Elements Through Simulation And The Taguchi Method. Journal of Human Capital Development, 6 (2). pp. 1-11. ISSN 1985-7012

Mohamad, Effendi (2013) Quantifying Benefits Of Lean Manufacturing Tools Implementation With Simulation In Coolant Hose Factory. Journal of Human Capital Development, 6 (2). pp. 13-26. ISSN 1985-7012

Mohamad, Effendi and Teruaki, Ito and Dani , Yuniawan (2013) A simulation-based approach to decision support for lean practitioners. In: 20th ISPE International Conference on Concurrent Engineering, 2-6 September 2013, Melbourne , Australia.

Mohamad, Minhat (2013) Development Of A STEP-NC Controller System Framework And Implementation In UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and ABD RAZAK , JEEFFERIE and Dimin, Mohd Fairuz (2013) EFFECT OF CHITOSAN GELATINIZATION TEMPERATURE ON WATER ABSORPTION AND WATER RETENTION OF CHITOSAN-BASED UREA FERTILIZER. International Journal of Automotive and Mechanical Engineering , 8 (July-D). pp. 1357-1366. ISSN 2229-8649 (Print); 2180-1606 (Online)

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and ABD RAZAK , JEEFFERIE and Mohd Fairuz, Dimin (2013) EFFECT OF CHITOSAN GELATINIZATION TEMPERATURE ON WATER ABSORPTION AND WATER RETENTION OF CHITOSAN BASED UREA FERTILIZER. In: International Conference on Mechanical Engineering Research, 1-3rd July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

Mohamad, Noraiham and Mahamood, Mazlin Aida and Yaakub, Juliana and Abdul Razak, Jeefferie and Muchtar, Andanastuti and Shueb, Mohammed Iqbal and Kasim, Mohd Shahir and Mohd Abid, Mohd Asyadi Azam and Yaakob, Mohd Yuhazri and Mustafa, Nuzaimah and Toibah, Abd Rahim and Qumrul, Ahsan (2013) FUNCTIONALISATION OF ETHYLENE-PROPYLENE COPOLYMER (EPM) BY MELT GRAFTING OF MALEIC ANHYDRIDE (MAH) USING HIGH SHEAR INTERNAL MIXER. In: International Conference on the Science and Engineering of Materials, 13-14 Nov 2013, Kuala Lumpur, Malaysia.

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Abdollah, Mohd Fadzli bin and Abd Manaf, Mohd Edeerozey (2013) Mechanical and Morphological Properties of Polypropylene/Epoxidized Natural Rubber Blends at Various Mixing Ratio. Procedia Engineering , 68. pp. 439-445. ISSN 1877-7058

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Yaakub, Mohd Yuhazri and Abdollah, Mohd Fadzli and Abd Manaf, Mohd Edeerozey (2013) Mechanical and morphological properties of polypropylene/epoxidized natural rubber blends at various mixing ratio. Procedia Engineering . pp. 1-6. ISSN 1877-7058 (Unpublished)

Mohamad, Noraiham and Zainol, Nur Sharafina and YAAKOB, MOHD YUHAZRI and ABD RAZAK , JEEFFERIE (2013) MORPHOLOGICAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE/EPOXIDIZED NATURAL RUBBER THERMOPLASTIC VULCANIZATES TREATED WITH MALEIC ANHYDRIDE-GRAFTED POLYPROPYLENE. International Journal of Automotive and Mechanical Engineering , 8 ((July-). pp. 1305-1315. ISSN 2180-1606 (online) 2229-8649 (print)

Mohamad, Norhidayah and Hoshino, Yasuo (2013) Host Country Restrictions, Choice of Entry Mode and Japanese Subsidiaries Performance in Developing Countries. American Journal of Economics. pp. 12-17. ISSN 2166-4951

Mohamad Afiq, Shawaldin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill - Study Of Subsurface Micrograph. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Aisamudin , Shuhaimi (2013) Effect of carbon black on the properties of graphite-epoxy composite for bipolar plate. Project Report. UTeM, Melaka. (Submitted)

Mohamad Azwan, Mohamed Sakri (2013) Academic Marking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fahmi, Mohamad Noh (2013) Short Circuit Current Protection Scheme In 500kV Transmission System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fikri, Nasir (2013) Development Of Slicing Machine Using Integrated Approach (Total Design). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ibrahim, Mohd Farid (2013) EZ Homestay. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Idzhar, Ya'akub (2013) UTeM Curriculum Vitae System (UTeMCV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Isa, Mohd Sa'ari and Awang Md Isa, Azmi and Mohd Zin, Mohd Shahril Izuan and Zakaria, Zahriladha and Haron, Nor Zaidi and Asmala, A. (2013) A Novel Technique of Controlling Signal Propagation within Array Elements using Switchable Miniaturized Electromagnetic Band Gap. In: UNSPECIFIED.

Mohamad Isa, Mohd Sa'ari and Awang Md Isa , Azmi and Mohd Zin, Mohd Shahril Izuan and Zakaria, Zahriladha and Nor Zaidi , Haron and Asmala, A. (2013) A Low Profile Switchable Pattern Directivity Antenna using Circular Sectorized EBG. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 5 (2). pp. 11-18. ISSN 2180-1843

Mohamad Izzat Afifi, Yasin (2013) Comparison Of Classic And Motion Tween Techniques In 2D Animation Global Warming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Jaya, Abdul Syukor and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Mohd Razali and Abd. Rahman, Md. Nizam and Hasan Basari, Abd Samad (2013) Predictive Modeling of TiN Coating Roughness. Advanced Materials Research, 626 (2013). pp. 219-223. ISSN 1662-8985

Mohamad Juoi, Jariah and Nazari , Farahani Irna and Mitan, Nona Merry Merpati and Shaaban, Azizah (2013) Rheological Properties of Urea-CaLS Mixture for Urea Fertilizer Granulation. Advanced Materials Research , Vol. 7. pp. 329-332. ISSN 1022-6680

Mohamad Razif, Mohd Jabar (2013) Simulation Of Displacement Control For Piezoelectric Actuator Using PID Controller (electronic resource). Project Report. UTeM, Melaka. (Submitted)

Mohamad Ridwan , Ramli (2013) Cutter Path Strategy For Machining Craniofacial Medical Implant PEEK Composite. Project Report. UTeM, Melaka. (Submitted)

Mohamad Shukri , Zakaria and Muhammad Zaidan, Abdul Manaf and Mohd Hafidzal, Mohd Hanafi and Mohd Noor Asril, Saadun (2013) Computational Simulation of Boil-Off Gas Formation inside Liquefied Natural Gas tank using Evaporation Model in ANSYS Fluent. Applied Mechanics and Materials, 393. pp. 839-844. ISSN 1660-9336

Mohamad Shukri , Zakaria (2013) Greenhouse Gas Reduction by Utilization of Cold LNG Boil-off Gas. Procedia Engineering, 53. pp. 645-649. ISSN 1877-7058

Mohamad Syafiq , Mokhtar (2013) The effect of heat treatment on the microstructures and mechanical properties of copper alloy. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zaharudin , Sariman (2013) Position Tracking Of Slider Crank Mechanism By Using PID Controller. Project Report. UTeM, Melaka. (Submitted)

Mohamad Zuric Adham , Mat Esa (2013) Alat Penghilang Sakit Belakang. Project Report. UTeM, Melaka. (Submitted)

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2013) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4-6, 2013, Johor Bahru, Malaysia.

Mohamed Aminuddin, Mai Mariam (2013) The effect of sound levels on attention deficit. 2013 International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering. pp. 131-134. ISSN 978-1-4799-1649-8

Mohamed Aminuddin, Mai Mariam and Mustaffa, Izadora and Md Dom, Hairulisam (2013) Membezakan Tanggapan Kelantangan Bunyi dengan Menggunakan Nada Sinus Berulangan. In: Prosiding Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Ke -3, 2-3 Julai 2013, EDC Hotel Universiti Utara Malaysia.

Mohamed Nazri, Chemiran (2013) Autofilling Form Use At FKEKK. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Yusof, Mohd Raris (2013) Impak perlaksanaan amalan persekitaran berkualiti 5S di Institut Teknikal Jepun Malaysia. Masters thesis, UTeM.

Mohammad Aizrulshah, Kamaruddin (2013) Design And Optimization Of Runner And Gating Systems For The Permanent Mold Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Azrol, Ahmad (2013) Dual Maximum Power Point Tracking : Focus On Dynamic MPPT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Faisal, Ismail (2013) Secure And Wireless Student Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafizuddin , Shammuin (2013) Insulation materials for home residence building wall. Project Report. UTeM, Melaka. (Submitted)

Mohammad Haiqal , Supaat (2013) Simulation of mixed convection in a channel with a cavity heated from different side using fluent. Project Report. UTeM, Melaka. (Submitted)

Mohammad Nazry , Rosley (2013) Total design of Water Tank Leaning Robot (WATCLEAR). Project Report. UTeM, Melaka. (Submitted)

Mohammad Shahin , Mansor (2013) Simulation of soot movement in diesel engine. Project Report. UTeM. (Submitted)

Mohammed Nasser, Ahmed (2013) Automated Kids Tracking System Using Androids (KiTSA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Rozi , Hamid (2013) Finite element micromechanical modeling of aluminium magnesium alloy during plastic deformation. Project Report. UTeM. (Submitted)

Mohammed Umar-Hassan, Mohammed Rosdi (2013) Glove Control Helicopter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohanraj, Letchimenan (2013) Design And Develop An Integrated Utility System (Energy Meter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd , amran and Salmah, Siti and Hussein, Nur Izan Syahriah and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process. In: Malaysian International Tribology Conference , November 18-20, 2013, Kota Kinabalu, Sabah, Malaysia.

Mohd , amran and Salmah, Siti and Zaki, M and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Mohd Shahir, Kasim and Mohd Amri , Sulaiman (2013) Study the effects of pressure on warpage of dumbbell plastics part in injection moulding machine. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Abid, Mohd Asyadi Azam (2013) Significant Capacitance Performance of Vertically Aligned Single-Walled Carbon Nanotube Supercapacitor by Varying Potassium Hydroxide Concentration. International Journal of Electrochemical Science (IJES), 8 (3). pp. 3902-3911. ISSN 1452-3981

Mohd Abid, Mohd Asyadi Azam (2013) Towards realization of high performance energy storage device: Nanostructuring CNT electrode. In: Workshop on Advanced Energy Storage Materials & Devices (WAESD), 4-5 July 2013, UPNM, Kuala Lumpur.

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin (2013) Development of High Performance Electrochemical Capacitor: A Systematic Review of Electrode Fabrication Technique Based on Different Carbon Materials. ECS Journal of Solid State Science and Technology. M3101-M3119. ISSN 2162-8777

Mohd Abid, Mohd Asyadi Azam and Isomura , Kazuki and Fujiwara, Akihiko and Shimoda, Tatsuya (2013) Direct growth of vertically aligned single-walled CNTs on conducting substrate and its electrochemical performance in ionic liquids. In: International Symposium on Advanced Materials Science, 17 - 18 October 2013, JAIST, Ishikawa, Japan.

Mohd Abid, Mohd Asyadi Azam and Mohd Warikh, Abd Rashid (2013) X-ray and morphological characterization of Al-O thin films used for vertically aligned carbon nanotube growth. Advanced Materials Research. pp. 213-218. ISSN 10226680

Mohd Abid, Mohd Asyadi Azam and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Noraiham and Azizan, Mohd Arif and Abdul Manaf, Nor Syafira (2013) Carbon Based Electrochemical Capacitor in 1M H2SO4 Electrolyte. In: MUCET 2013, 2-3 December 2013, Kuantan.

Mohd Abid, Mohd Asyadi Azam and Rosle, Muhammad Firdaus (2013) Electrochemical Analyses of Carbon Nanotube Based Supercapacitor in 1M LiPF6 Organic Electrolyte. International Journal of Electroactive Materials, 1. pp. 55-59. ISSN 2289-179X

Mohd Abid, Mohd Asyadi Azam and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah (2013) Nanostructuring Ultra-thin Co Films to Active Catalyst Particles for Vertically Aligned Single-Walled CNT Growth. Procedia Engineering , 68. pp. 566-571. ISSN 1877-7058

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin and Talib, Elyas (2013) Aligned carbon nanotube from catalytic chemical vapor deposition technique for energy storage device: a review. Ionics, 19 (11). pp. 1455-1476. ISSN 0947-7047 (Print); 1862-0760 (Online)

Mohd Afis , Ayem (2013) Analysing the intention of Institut Kemahiran MARA Jasin graduates to become entrepreneurs. Masters thesis, UTeM.

Mohd Ali, Nursabillilah (2013) Performance analysis of robust road sign identification. IOP Conference Series: Materials Science and Engineering. 012017-012017. ISSN 1757-8981

Mohd Ali, Rosli (2013) Wear Behavior of Carbon Nanotube (CNT)Short Natural Fiber Reinforced Epoxy Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Nursabillilah (2013) Performance Comparison between PCA and ANN Techniques for Road Signs Recognition. Applied Mechanics and Materials. pp. 611-616. ISSN 1660-9366

Mohd Ali, Nursabillilah (2013) Performance Comparison between RGB and HSV Color Segmentations for Road Sign Detection. Applied Mechanics and Materials. pp. 550-555. ISSN 1660-9336

Mohd Ameer Aiman , Ruhaizi (2013) Improving stability of water based nanocarbon using OH-CNT modifield with polyvinyl pyrrolidone as a dispersing agent. Project Report. UTeM, Melaka. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Asyraf, Mohd Zakhi (2013) Preparation And Characterization Of Thin Hard Density Board From Paddy Husk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Annuar, Khalil Azha and Selamat, Nur Asmiza and Jaafar, Hazriq Izzuan and Mohamad, Syahrul Hisham (2013) A Preliminary Study on Camera Auto Calibration Problem Using Bat Algorithm. In: Science & Engineering Technology National Conference 2013, 3-4 July 2013, Kuala Lumpur, Malaysia..

Mohd Annuar, Khalil Azha and Yahaya, Muhammad Sharil and Che Hasan, Mohd Hanif and Mohamad, Syahrul Hisham and Ibrahim, Zulkifli and Mohd Ab Halim, Mohd Firdaus (2013) Pengukuran & Instrumentasi. In: Pengukuran & Instrumentasi. Penerbit Universiti, UTeM, pp. 1-55. (Submitted)

Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Azhan , Ab. Rahman (2013) DEVELOPMENT AND MODELING OF UNMANNED UNDERWATER REMOTELY OPERATED VEHICLE USING SYSTEM IDENTIFICATION FOR DEPTH CONTROL. Journal of Theoretical and Applied Information Technology, Vol 56 (1). pp. 136-145. ISSN 1992-8645

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Fara Ashikin , Ali and Muhammad Nur , Othman (2013) Development of Wireless Data Transfer System on Unmanned Underwater Vehicles Application. International Journal of Engineering Research & Technology, 2 (10). pp. 1322-1330. ISSN 2278-0181

Mohd Aras, Mohd Shahrieel and Abdul Rahman, Ahmad Fadzli Nizam (2013) Analysis of an Improved Single Input Fuzzy Logic Controller Designed For Depth Control Using Microbox 2000/2000c Interfacing. International Review of Automatic Control , 6 (6). pp. 728-733. ISSN 1974-6059

Mohd Aras, Mohd Shahrieel and Anuar, Mohamed Kassim and Khamis, Alias (2013) Tuning Factor the Single Input Fuzzy Logic Controller to Improve the Performances of Depth Control for Underwater Remotely Operated Vehicle. In: 2013 European Modelling Symposium, 20-22/11/2013, Manchester Conference Centre.

Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Anuar , Mohamed Kassim (2013) TUNING PROCESS OF SINGLE INPUT FUZZY LOGIC CONTROLLER BASED ON LINEAR CONTROL SURFACE APPROXIMATION METHOD FOR DEPTH CONTROL OF UNDERWATER REMOTELY OPERATED VEHICLE. Journal of Engineering and Applied Sciences, 8 (6). pp. 208-214. ISSN 1816-949X

Mohd Aras, Mohd Shahrieel and Mohd Farriz , Md Basar and Abdul Azis, Fadilah and Fara Ashikin , Ali (2013) Analysis Movement of Unmanned Underwater Vehicle using the Inertial Measurement Unit. International Journal of Emerging Science and Engineering (IJESE), 1 (10). pp. 47-53. ISSN 2319–6378

Mohd Aras, Mohd Shahrieel and Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri (2013) ROBUST CONTROL OF ADAPTIVE SINGLE INPUT FUZZY LOGIC CONTROLLER FOR UNMANNED UNDERWATER VEHICLE. Journal of Theoretical and Applied Information Technology, 57 (3). pp. 372-379. ISSN 1992-8645

Mohd Aras, Mohd Shahrieel and Ab Rahman, Azhan (2013) Thruster Modelling for Underwater Vehicle Using System Identification Method. International Journal of Advanced Robotic Systems, Volume (252. 2). pp. 1-12. ISSN 1729-8806

Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Razilah , Abdul Rahim and Ahmad , Arfah (2013) A Comparison Study Between Two Algorithms Particle Swarm Optimization for Depth Control of Underwater Remotely Operated Vehicle. International Review on Modelling & Simulations, 6 (5). pp. 1-10. ISSN 1974-9821

Mohd Aras, Mohd Shahrieel and Kamarudin, Muhammad Nizam and Jaafar, Hazriq Izzuan and Mohd Nor, Arfah Syahida and Mohd Shah, Hairol Nizam and Anuar , Mohamed Kassim and Ab Rashid, Mohd Zamzuri (2013) DEVELOPMENT AND MODELLING OF UNMANNED UNDERWATER GLIDER USING THE SYSTEM IDENTIFICATION METHOD. Journal of Engineering and Technology, 4 (2). pp. 1-22. ISSN 2180-3811

Mohd Aras, Mohd Shahrieel and Md Basar, Mohd Farriz and Abd Azis, Fadilah and Ali, Fara Ashikin (2013) Obstacle Avoidance System for Unmanned Underwater Vehicle using Fin System. International Journal of Science and Modern Engineering (IJISME), 1 (9). pp. 24-30. ISSN 2319-6386

Mohd Aras, Mohd Shahrieel and Mohd Farriz , Md Basar and Hasim, Norhaslinda and Muhammad Nizam , Kamarudin and Jaafar, Hazriq Izzuan (2013) Development and Modeling of Water Tank System using System Identification Method. International Journal of Engineering and Advanced Technology (IJEAT). pp. 278-283. ISSN 2249 – 8958

Mohd Aras, Mohd Shahrieel and Mohd Nor, Arfah Syahida and Ab Rashid, Mohd Zamzuri (2013) Development of Subsea Altimeter Sensor System (SASS) Using Portable Sonar Sensor Fish Finder Alarm for Unmanned Underwater Vehicles. International Journal on Recent Trends in Engineering & Technology, 8 (2). pp. 110-115. ISSN 2158-5563

Mohd Arif , Zaulkefli (2013) Acustic of mosque : the effect of roof shape on it's acoustic performance. Project Report. UTeM. (Submitted)

Mohd Ariff, Radzuan (2013) Stable Walking Motion NAO Humanoid Robot Using Cubic Polynomial Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aris, Nor Azlan and Lam, Hong Yin and Din, Jafri and Luini , Lorenzo (2013) 1-Minute Integrated Rain Rate Statistics Estimated from Tropical Rainfall Measuring Mission Data. IEEE Antennas and Wireless Propagation Letters, 12. pp. 132-135. ISSN 1536-1225

Mohd Azarul Syazari , Che Aziz (2013) The effects of ice formation on airfoil performance. Project Report. UTeM, Melaka. (Submitted)

Mohd Azhar , Ramli (2013) Smoke opacity meter via gsm. Project Report. UTeM. (Submitted)

Mohd Azlan, Ahmad (2013) Water Tank Level Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Mior Hamdan (2013) X-Band Filter Using Parallel Coupled-Line Technique With DGS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azman Syafiq , Yusof (2013) Development Of A Pick And Place Table Top Sized Robot Cell. Project Report. UTeM, Melaka. (Submitted)

Mohd Badrun, Yusof (2013) Development Of Remotely Operated Underwater Vehicle Maneuvers Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bakri , Ismail (2013) Regenerate of decanter cake from palm oil mill waste effluent for the removal of heavy metal ions from industrial wastewater. Project Report. UTeM, Melaka. (Submitted)

Mohd Daud, Mohd Ahadlin (2013) Effect of Thermoplastic Polymer Waste (PET) in Lightweight Concrete. Applied Mechanics and Materials , 795. pp. 324-328. ISSN 1521-6783

Mohd Daud, Mohd Ahadlin and Din, Abdul Talib and Jusoff, Kamaruzzaman and Selamat, Mohd Zulkefli (2013) Precipitation Strengthening in Extruded AZ61 Magnesium Alloys During Heat Treatment Process. World Applied Sciences Journal 21(Special Issue of Engineering and Technology), 21 (5). pp. 41-46. ISSN 1818-4952

Mohd Daud, Mohd Ahadlin and Nasir, Nurulhilmi Zaedah and Rivai, Ahmad and Selamat, Mohd Zulkefli (2013) Dynamic Fracture Toughness of Magnesium Alloy under Impact Loading Conditions. Procedia Engineering, 53. pp. 639-644. ISSN 1877-7058

Mohd Ermin Alif, Norsani (2013) Human Motion Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Esa, Mona Riza and Ahmad, Mohd Riduan and Cooray, Vernon (2013) Wavelet Analysis of The First Pulse of Initial Breakdown Process in Lightning Discharges. In: PIERS 2013, 12 - 15 August 2013, Stockholm, Sweden.

Mohd Fadzli, Talib (2013) Design And Analysis Of Production Tooling Using Computational Fluid Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahame, Che Daud (2013) Influence Of Cutting Condition On Product Quality When Cutting Aluminum Alloys. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi Adli , Salahuddin (2013) Investigation on diesel engine performance using the second generation of biodiesel and its blend /. Project Report. UTeM. (Submitted)

Mohd Faizal , Mohd Pauzi (2013) Tailored Orbital Welding Of Dissimilar Stainless Steels Material. Project Report. UTeM, Melaka. (Submitted)

Mohd Faizal , Abdollah and Shahrin , Prof. Dr. , Sahib and Nanna , Prof. Dr, Suryana and Othman , Mohd (2013) Remote sensing image classification using soft computing approach. Other thesis, UTeM.

Mohd Fakhruddin, Abdullah (2013) Corrosion Failure Analysis Of Weldment Area At Internal Surface Of Carbon Steel Pipe Used In Oil And Gas Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez, Mohd Afif (2013) Smart Parking System Using Wireless Connectivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez , Abdul Rahman (2013) Merekabentuk Dan Membangunkan Sistem Pembersihan Kendiri Bagi Peralatan Penuaian Air Hujan. Project Report. UTeM, Melaka. (Submitted)

Mohd Farid , Mohd Yusof (2013) Cloud storage subsystem for pin-it social network. Project Report. UTeM. (Submitted)

Mohd Fazlan, Ali (2013) Battery Management System For Solar Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fidha Uddin , Alias (2013) Boxy Aircraft Component CNC Lathe Machining- Haas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Jamaludin (2013) Prediction of helical gear life using wear debris analysis. Project Report. UTeM, Melaka. (Submitted)

Mohd Fuad , Ibrahim (2013) Corrosion analysis of internal surface of carbon steel natural gas piping. Masters thesis, UTeM.

Mohd Hafidzal, Mohd Hanafi and Mohamad Shukri , Zakaria and Muhammad Zaidan, Abdul Manaf and Mohd Noor Asril, Saadun (2013) Effect of Soot Particle Diameter to Soot Movement in Diesel Engine. Journal of Engineering and Technology. pp. 85-93. ISSN 2180-3811

Mohd Hafidzal, Mohd Hanafi and Roslizar, Aiman and Zakaria, Mohamad Shukri and Saadun, Mohd Noor Asril and Saleman, Abd Rafeq (2013) Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force. Applied Mechanics and Materials, 393. pp. 275-280. ISSN 1660-9336

Mohd Hafidzal, Mohd Hanafi and Wan Mohd Faizal, Wan Mahmood and Muhammad Zaidan, Abdul Manaf and Mohamad Shukri , Zakaria and Mohd Noor Asril, Saadun and Mohd Nur Azmi, Nordin (2013) SOOT PARTICLE TRAJECTORIES OF A DI DIESEL ENGINE AT 18° ATDC CRANKSHAFT ANGLE. Materials Science and Engineering, 50 (012003). pp. 1-6. ISSN 1757-8981

Mohd Hafiszudin , Ahmad (2013) Design And Fabrication Of Ball Feeder Mechanism And Body For Tennis Ball Machine. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafiz, Sulaiman (2013) Design Of Shallow Source / Drain Extension (SDE) Profiles In Improving Short Channel Effect (SCES) In Nanoscale Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohamad Kassim (2013) Bangunan penyejuk solar pasif. Project Report. UTeM, Melaka. (Submitted)

Mohd Hanafi, Md Rasul (2013) Development Of Space Vector Modulator For 3-Phase Voltage Source Inverter (VSI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hannif, Jamaludin (2013) minit mesyuarat jwtnkuasa. testing. pp. 50-54. ISSN 1055-0142

Mohd Hazwan, Mohamed Harith (2013) Home Mailbox Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazwan Sharif, Hassan (2013) A Study On Effect of Environment Stressor (Indoor Air Quality And Noise) On Workers Performing In SMI Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilman , Kamaruzaman (2013) Thermal comfort study for student laboratory. Project Report. UTeM, Melaka. (Submitted)

Mohd Ibrahim, Imran (2013) Radial Line Slot Array Antenna Development in Malaysia. Antennas and Propagation (EuCAP), 2013 7th European Conference on. pp. 174-178. ISSN 978-88-907018-1-8

Mohd Ibrahim, Imran (2013) Wide Band Open Ended Air Gap RLSA Antenna at 26GHz Frequency Band. Progress In Electromagnetics Research. pp. 1-4. ISSN 1070-4698

Mohd Idham Khalid , Abu Hasan (2013) Numerical study of fluid and heat transfer in mixing elbow. Project Report. UTeM. (Submitted)

Mohd Idzwan, Othman (2013) Localization And Positioning via Wi-Fi Signals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ikhwan, Ismail (2013) The Construction Of Crosstalk’s Testing Apparatus For Teaching And Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jazlan, Mohd Jahari (2013) A Study On Psychophysical To Enhancing Comfortability Among Occupational Driver In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Johar, Fauzi and Azmin, Farah Ayuni and Suaidi, Mohd Kadim and Shibghatullah, Abdul Samad and Ahmad, Badrul Hisham and Salleh, Siti Nadzirah and Abdul Aziz, Mohd Zainol Abidin and Md Shukor, Mahfuzah (2013) A review of genetic algorithms and parallel genetic algorithms on Graphics Processing Unit (GPU). In: 2013 IEEE International Conference on Control System, Computing and Engineering,, 29 Nov - 1 Dec 2013, Penang,Malaysia.

Mohd Khairi, Mohamed Nor and Okubo, Shigenori (2013) The Design of Nonlinear Servo System using Fuzzy Method. IEEJ Transactions on Electronics, Information and Systems. pp. 652-662. ISSN 0385-4221

Mohd Khairul Al'fat'hah , Izman (2013) Fencing Improvement At Palm Oil Mill To Reduce Costly Waste. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairul Mazni , Mohamad (2013) Comparative study on stability of nanofluid using two different dispering agents. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairur Rahim , Awang (2013) Start Stop System. Project Report. UTeM, Melaka. (Submitted)

Mohd Khairy, Ismail (2013) Greenhouse Monitoring Using Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairy , Zahari (2013) Design of switchable mathed bandstop filter. Masters thesis, UTeM.

Mohd Khanapi, Abd Ghani (2013) Pervasive Health Knowledge Management. In: Pervasive Health Knowledge Management. Springer, USA, pp. 81-102. ISBN 978-1-4614-4514-2

Mohd Lutfi , Azmy (2013) Impact of carbonization process on briquette from palm oil residue. Project Report. UTeM, Melaka. (Submitted)

Mohd Luthfi , Omar (2013) Effect of using the second generation biodiesel and its blend in the compression ignition engines. Project Report. UTeM, Melaka. (Submitted)

Mohd Muzafar, Ismail and Mohd Azlishah, Othman and Muhammad Norazlan Shah, Zainudin and Ridza Azri, Ramlee and Maizatul Alice, Meor Said (2013) An Electromagnetic Field Effect On A Human Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nabil Fikri, Hanif (2013) Effect Of Electrical Grounding Of Substrate On The Magnetron Sputtering Of Titanium Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nabil Imran, Kamaruzaman (2013) Design Of Antenna At 1.8Hz With Rectifying Circuit For RF Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib , Ali Mokhtar and Fairul Azni, Jafar and Ahmad Yusairi, Bani Hashim and Hazman, Hasib and Mohd Nazrin, Muhammad (2013) Analysis of unimorph piezoceramic patches on damped square shaped plate. Applied Mechanics and Materials, 315. pp. 965-971. ISSN 1660-9336

Mohd Nasir, Mohamad Na'im and Sulaima, Mohamad Fani and Jaafar, Hazriq Izzuan and Ramani, Anis Niza and Wan Abdul razak, Intan Azmira (2013) Photometric measurement for LED roadway lighting at Kuala Lumpur – Karak Expressway. In: MUCET 2013, 2-3 December 2013, Kuantan.

Mohd Nasir, Mohamad Na'im and Alias , Khamis (2013) DC Bus Instability Driving by Photovoltaic Source with Constant Power Load. Applied Mechanics and Materials, 313-31. pp. 853-857. ISSN 1660-9336

Mohd Nasir, Mohamad Na'im and Jali, Mohd Hafiz and Rashid, Muhammad Alif Ridzuan and Sulaima, Mohamad Fani and Yahaya, M. S (2013) Development of Hybrid Photovoltaic-Wind System for LED Street Lighting. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013), 30 - 31 October, 2013, Melaka, Malaysia. (Unpublished)

Mohd Nazrin, Jusoh (2013) WVOM (Wide View Object Movement) Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, helmy Adly and Shahbodin, F. and Che Pee, Ahmad Naim (2013) Developing a Hybrid Visual Perception Game using the ADDIE Approach for Autism. Australian Journal of Basic and Applied Sciences. pp. 1-4. ISSN 1991-8178

Mohd Nor, Rozilawati and Chong, Shin Horng (2013) Continuous Motion NCTF control of a one mass rotary system. In: 2nd International Conference on Electrical, Control and Computer Engineering (InECCE), August 27-28, 2013, Kuantan, Malaysia.

Mohd Nor , Rozilawati and Chong, Shin Horng (2013) Positioning control of a one mass rotary system using NCTF controller. In: IEEE International Conference on Control System, Computing and Engineering, 29 Nov - 1 Dec 2013, Penang, Malaysia.

Mohd Nor Alif Ikhwan, Baharom (2013) Comparison Of Productivity Of Small Scale Industry Using Stopwatch Time Study And Cost Benefit Analysis Of Productivity Improvement Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azmi , Mohd Tarmiji (2013) Biodiesel production from waste vegetables oil using catalyzed transesterification. Project Report. UTeM, Melaka. (Submitted)

Mohd Nor Effendy, Nek Man (2013) Engineering Analysis On Spreader Beam By Using Manual Calculation And Solidworks Simulation Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Iftikhar, Makhtar (2013) Mailbox Notification Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nur Shafiq , Ahmad Razimi (2013) Co-processing of coconut shell and sugarcane residue as solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Mohd Rahim, Mohd Yusri (2013) Study of optimal machining parameters when machining AISI 304 stainless steel with carbide-PVD coated (TiAIN) cutting tool. Masters thesis, UTeM.

Mohd Rasip, Norhayati and Basari, A.S.H and Ibrahim, N. K. and Hussin, B. and Asmai, S. A. (2013) An Investigation of Intelligent Search Techniques For Nurse Scheduling Improvement in Healthcare Organization. In: e-Health Symposium 2013, 26 JUNE 2013, UNITEN, KAJANG, SELANGOR.

Mohd Razali, Muhamad (2013) Deposition And Characterization Of Tin Coated PVD Sputtering Of Magnetized Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Salamun (2013) Additive Manufacturing For Ergonomic Improvement Of Knee Support Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzwanil Hanif, Ruslan (2013) Materials Selection For Conceptual Automotive Hood Design Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Ahmad Saroni (2013) Experimental Study On Ground Resistance Reduction Based On Earth Electrode. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Ruslan, Mohd Hafidz and Sopian, Kamaruzzaman (2013) Parametric Study on Water Based Photovoltaic Thermal Collector. WSEAS Press. ISBN 978-1-61804-175-3

Mohd Rosli, ZULKIFLI and Jariah, Mohamad Juoi and DIlip, Arudra and Kalthom, Hussain and Azuraien, Japper Jaafar (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. Journal of Non-Crystalline Solids. pp. 8-13. ISSN 0022-3093

Mohd Rosli, ZULKIFLI and Joseph Sahaya Anand, T and S., Shariza and Azizah, Shaaban and Sivarao, Subramonian and Radzai, Said and Kamaruzaman, Jusoff and Thiru, S (2013) Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route. World Applied Sciences Journal. pp. 60-67. ISSN 1818-4952

Mohd Rosli, ZULKIFLI and yusliza, yusuf and Jariah, Mohamad Juoi and Zainab , Mahamud and Kwan, Wai Loon (2013) Ti6Al4V Surface Hardness Improvement by Duplex Coating. Advanced Materials Research. pp. 370-374. ISSN 1022-6680

Mohd Rosli, z.m.rosli and Kwan, Wai Loon and Jariah, Mohamad Juoi and Nafarizal , Nayan and Zainab , Mahamud and Yusliza, Yusuf (2013) Characterization of TiAlBN Nanocomposite Coating deposited via Radio Frequency Magnetron Sputtering using Single Hot-Pressed Target. Advanced Materials Research, Vol. 626 (2013). pp. 298-301. ISSN 1022-6680

Mohd Rosli, z.m.rosli and Zainab , Mahamud and Jariah, Mohamad Juoi and Nafarizal, Nayan and Kwan, Wai Loon and Yusliza, Yusuf and Hairul Effendy, Maulud (2013) Corrosion behavior of AZ91 Mg-Alloy coated with AlN and TiN in NaCl and Hank’s solution. Advanced Materials Research. pp. 275-279. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and Dilip, Arudra and Jariah, Mohamad Juoi and Toibah, Abd Rahim and Siti Rahmah, Shamsuri and Azuraien, Japper Jaafar (2013) PHYSICAL AND MECHANICAL PROPERTIES OF GLASS COMPOSITE MATERIAL MADE FROM INCINERATED SCHEDULED WASTE SLAG AND SLS WASTE GLASS. Advanced Materials Research. pp. 280-288. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and Yusuf, Y. and Juoi, J. M. and Kwan, Wai Loon and Zainab , Mahamud (2013) Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy. Pertanika J. Sci. & Technol. pp. 45-58. ISSN 0128-7680

Mohd Rusdy , Yaacob and Lim , Wee Teck and Nik Anwar, Nik Syahrim (2013) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Rusdy , Yaacob and Anuar , Mohamed Kassim and Lim , Wee Teck (2013) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Rusdy , Yaacob and Nik Anwar, Nik Syahrim and Nordin, Nurdiana and Muhammad, Mohd Nazrin (2013) Effect of Distance on the Maximum Data Transfer for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. Advanced Materials Research, 748 (AMR.74). pp. 921-926. ISSN 1662-8985

Mohd Rusydi , Rosli (2013) The Uses Of Trade Secret In The Technological Based Company. Project Report. UTeM, Melaka. (Submitted)

Mohd Ruzaini, Arshad (2013) Islamic Learning (IS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saari , Mohamad Isa (2013) Antenna radiation control using electronic magnetic band gap. PhD thesis, UTeM.

Mohd Saat, Fatimah Al Zahrah and Jaworski, Artur (2013) Oscillatory Flow and Heat Transfer Within Parallel-plate Heat Exchangers of Thermoacoustic Systems. In: World Congress on Engineering 2013, 3-5 July 2013, Imperial College, London.

Mohd Sahri, M.R. and Che Muhamad, C.M.K.I. and Abd Latif, M.J. and Mahmud, J. (2013) Parametric Study of Low Velocity Impact using Finite Element Analysis. Applied Mechanics and Materials, 393. pp. 397-402. ISSN 1660-9336

Mohd Said, Muzalifah and Mohammed Napiah, Zul Atfyi Fauzan and Arith, Faiz and Mohd Noh, Zarina (2013) NMOS Performance of Low Boron Activation on Group V for Ultra-Shallow Junction Formation. Advanced Materials Research. pp. 248-253. ISSN 10226680

Mohd Sanusi, Azmi and Muda, A. K. and Khadijah Wan, Mohd Ghazali (2013) Features Extraction of Arabic Calligraphy using extended Triangle Model for Digital Jawi Paleography Analysis. International Journal of Computer Information Systems and Industrial Management Applications. pp. 696-703. ISSN 2150-7988

Mohd Shaari Azyze, Nur Latif Azyze and Razali, Muhammad Razmi and Md Isa, Ida Syafiza and Miskon, Muhammad Fahmi (2013) PARAMETER STUDY OF STABLE WALKING GAITS FOR NAO HUMANOID ROBOT. Internaltional Journal of Reseach Engineering and Technology, 2 (08). pp. 16-23. ISSN 2319-1163

Mohd Shafiq Izwan, Yahaya (2013) Development Effective Permittivity Algorithm For Conformal Structure In 3D Finite Different Time Domain (FDTD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Mohd Sobran, Nur Maisarah (2013) AUTONOMOUS MOBILE ROBOT VISION BASED SYSTEM: HUMAN DETECTION BY COLOR. Journal of Theoretical and Applied Information Technology. pp. 1-7. ISSN 1992-8645

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri (2013) Develop and Implementation of Autonomous Vision Based Mobile Robot Following Human. International Journal of Advanced Science and Tecnology. pp. 1-6. ISSN Nil

Mohd Shahardey, Abd Rahim (2013) Design Of Die For Hot Press Forming In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahib, Ab Aziz (2013) MYKAD Detector For Alcohol Vending Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril, Abdul Razak (2013) Development Of 3D Finite-Difference Time-Domain (FDTD) Algorithm In Matlab For Dielectric Resonator Antenna Radiation Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazni , Halid (2013) Kenderaan Dua Alam UTeM : Analisa Pengendalian Dan Pemanduan. Project Report. UTeM, Melaka. (Submitted)

Mohd Soufhwee , Abd Rahman (2013) Development of integrated failure mode and effect analysis (I-FMEA) for automotive industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Syafiq Shaik, Abdul Aziz (2013) Development Of Cooling System In Hot Press Forming For Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahir, Abdul Rashid (2013) Man-Machine Optimization (MMO) For Technicians In Semiconductor Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syawal , Sulaiman (2013) Investigation of electric motorcycle performance in UTeM Kampus Induk. Project Report. UTeM, Melaka. (Submitted)

Mohd Syazman , Jaafar (2013) Laser Machining Of Waste Plastic Products. Project Report. UTeM, Melaka. (Submitted)

Mohd Yuhazri, Yaakob and Kamarul, Amir Mohamed and Hasoloan Haery, Ian Pieter (2013) Design Of A Thermal Efficent Heat Collector. Project Report. UTeM. (Submitted)

Mohd Zaid, Awang (2013) Effects Of Workpiece And Tool Rigidity On Machining Performances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaidi, Ahmad Sofian (2013) Automated Platform For Component Selection For Designing Manufacturing System Facility. Project Report. UTeM, Melaka. (Submitted)

Mohd Zaidi, Ahmad Sofian (2013) Automated Platform For Component Selection For Designing Manufacturing System Facility. Project Report. UTeM, Melaka. (Submitted)

Mohd Zin, Mohd Shahril Izuan and Awang Md Isa, Azmi and Mohamad Isa, Mohd Sa'ari (2013) UWB MAC Design Constraints and Considerations. International Journal of Computer Science and Mobile Computing, 2 (12). pp. 322-331. ISSN 2320–088X

Mohd Zulhilmi, Ahmad (2013) Development Of 3D Game Learning For Critical Thinking Technique : Mr. Right Hat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd. Chachuli, Siti Amaniah and Arith, Faiz (2013) Optimization Of Power And Gain In Two-Stage Op-amp By Using Taguchi's Approach. Advanced Materials Research. pp. 1-6. ISSN 2013

Mohd. Fizree, Zainal Abidin (2013) Investigate Surface Integrity When Machining FC300 Cast Iron Using Uncoated Carbide Ball End Mill : Study Of Surface Profile. Project Report. UTeM, Melaka. (Submitted)

Mona Riza , Mohd Esa and Mohd Riduan, Ahmad and Cooray, Vernon (2013) Wavelet analysis of the first electric field pulse of lightning flashes in Sweden. Atmospheric Research. pp. 1-17. ISSN 0169-8095 (In Press)

Muazatul Adweah, Ghazali (2013) Closed Loop DC-DC Converter For LED Driver Circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muda, A. K. and Choo, Yun Huoy and Muda, N. A. and Muda, A. K. (2013) SOCIFS feature selection framework for handwritten authorship. International Journal of Hybrid Intelligent Systems. pp. 83-91. ISSN 1875-8819

Muda, A. K. and Choo, Yun Huoy (2013) Feature selection methods for writer identification: a comparative study. TRANSACTION ON ELECTRICAL AND ELECTRONIC CIRCUITS AND SYSTEMS. pp. 10-16. ISSN 030303001000162013000178

Muda, A. K. and Muda, N. A. (2013) An Alternative to SOCIFS Writer Identification Framework for Handwritten Authorship. In: 2013 IEEE International Conference on Systems, Man, and Cybernetics, 13 - 16 October, 2013, Manchester, UK.

Muda, A. K. and Sharifah Sakinah, S.A. (2013) PCA and LDA as Dimension Reduction for Individuality of Handwriting in Writer Verification. In: 2013 13th International Conference on Intelligent Systems Design and Applications (ISDA), 8-10 Dec, 2013, Kuala Lumpur, Malaysia.

Muda, A. K. and Ummi Raba'ah, Hashim (2013) Rotation Invariant Texture Feature Based on Spatial Dependence Matrix for Timber Defect Detection. In: ISDA 2013, Dec. 8-10, 2013, UPM, Malaysia.

Mufidah Dalila, Marof (2013) Improving Efficiency Of Inventory System - A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Afiq, Bachok (2013) Design A PID Controller For An Activated Sludge Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Aliff, Noordin (2013) Thermoelectric Powered High Temperature Using Boost Converter With Supercapacitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Arif, Azizan (2013) Cyclic Voltammetry Analysis Of Carbon-Based Electrochemical Capacitor In 1M H2 SO4. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Ariffuddin, Mohd Noh (2013) Mini Water Buoy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Daleel , Mohd Idros (2013) Optimization Design Of Slicing Machine Using Design Of Manufacturing And Assembly (DFMA) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fariq, Ahmad (2013) Remote Measurement Of Wearable Sensor Using ZigBee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Firdaus, Jusoh (2013) Security Equipment Using Biometrics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Firdaus , Abd. Rashid (2013) Relationship of hofstede's dimensional culture towards performance (financial) of Melaka SME's service sector company. Project Report. UTeM. (Submitted)

Muhamad Haffiz, Mohd Radzi (2013) Design Of A Low Cost Accelerometer Measuring Ambient Vibration Using Piezoelectric Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Haffizi , Kamaruddin (2013) The relationship between performance appraisal and employee's performance. Project Report. UTeM. (Submitted)

Muhamad Hafizul, Mamat (2013) Service Marketing : The Effects Of Website Usability Towards Customer Satisfaction By Examining The Website Usability As Marketing Channel. Project Report. UTeM, Melaka. (Submitted)

Muhamad Idzuan , Omar Maat (2013) Development of rainwater storage tank for residential area. Project Report. UTeM, Melaka. (Submitted)

Muhamad Kamal Hafiz, Mohd Anuar (2013) Thermoelectric Powered High Temperature Using Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairi, Aripin and Y.M, Sam and Kumeresan, A.D and Kemao , Peng and Mohd Hanif , Che Hasan and Muhamad Fahezal, Ismail (2013) A Yaw Rate Tracking Control of Active Front Steering System Using Composite Nonlinear Feedback. In: Asiasim 2013. Communications in Computer and Information Science, 402 . Springer Berlin Heidelberg, pp. 231-242. ISBN 978-3-642-45036-5

Muhamad Suffian Sikandar, Gani (2013) Smart Post Box System With RF Technology And GSM Modem. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Syafiq, Md Najib (2013) Investigation on oil palm fiber composite mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhamad Tarmizi , Adnan (2013) Vehicle collision detector (vcd). Project Report. UTeM. (Submitted)

Muhammad Abdusshukur, Amat Jupri (2013) Surge Arrester Modeling - A Comparison Between Different Models For 500KV Transmission Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afiq, Yusof (2013) Development Of Prototype Sugar Cane Juice Extraction Machine (mechanical). Project Report. UTeM, Melaka. (Submitted)

Muhammad Afiq Fikri, Zainal (2013) Investigation And Study Sensor To Power Saving In Fke Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afzan, Azman (2013) Qualification admission to university (Get-U). Project Report. UTeM. (Submitted)

Muhammad Aiman, Ahmad Nordin (2013) The Design And Development Of Sign Language Translator Using Web Technology (Sign Language Translator). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aiman, Jamal Mohamed (2013) Home Controlling System By Using Voice Recognition (Via ZigBee). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aimi, Abu Hassan (2013) Application Of AHP Method In The Design Of Remanufacturing Improvement Processes For Crankshaft. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizat, Abd Rahim (2013) A Study And Analysis Of Consumer Product Design Using The Integration Of Kano Model And Quality Function Deployment - Case Study (Product Shampoo Bottle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Akmal Akif , Muhammad Wazir (2013) Experimental of flow measurement over different shape of cavities for low reynolds number. Project Report. UTeM. (Submitted)

Muhammad Alif Ridzuan, Rashid (2013) Energy Management For Hybrid PV-Wind System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amir Afham, Huslan (2013) The Success Factors Of Entrepreneurs In Photography Industry. Project Report. UTeM, Melaka. (Submitted)

Muhammad Amir Lufti, Radzali (2013) Development Of Single-Wheeled Balancing Scooter. Project Report. UTeM, Melaka. (Submitted)

Muhammad Asy Syaheed, Abdullah (2013) Effect Of Resin Ratio On Mechanical Properties Of Resin Bonded Sand Mould. Project Report. UTeM, Melaka. (Submitted)

Muhammad Audi Aufa, Sallehuddin (2013) Smart Exhibition By Using Near Field Communication (NFC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aufa , Mohd Uzir (2013) Modular Design Of Fourth Generation For Fire Fighting Ground Vehicle. Project Report. UTeM, Melaka. (Submitted)

Muhammad Azlan Shahariman , Ahmad (2013) Auto Silent Mode For Android Smartphones. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Bukhari, Kamarozaman (2013) Surveillance Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Danial Asyraf , Zahari (2013) Merekabentuk Dan Menguji Radiator Automotif Berbentuk Bulat. Project Report. UTeM, Melaka. (Submitted)

Muhammad Fahmi , Md Isa (2013) Rekabentuk Dan Fabrikasi Sistem Stering Dan Brek Kenderaan Dua Alam UTeM. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faisal , Zaidi (2013) Pengauditan jumlah pembaziran tenaga elektrik di dalam bilik kuliah di UTeM. Project Report. UTeM. (Submitted)

Muhammad Faiz , Othman (2013) The design and fabrication of hydraulic boom trainer with gripper attachment. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faizal, Md Ali (2013) Automatic Lamp Illumination System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faizh , Sazali (2013) Effects Of Cutting Parameter On Machining Performance For Wood-Plastic Composite Material. Project Report. UTeM, Melaka. (Submitted)

Muhammad Fakhrur Radzi , Sa'adon (2013) Carbonisation temperature effect on preparation of biochar from tanduk banana peel residue (musa paradisiaca fa. corniculata) as a solid biofuel. Project Report. UTeM, Melaka. (Submitted)

Muhammad Faqrul Reduan , Abdul Majid (2013) Novel EDM Thread Whirling Technique For Orthopedic Medical Screw Implant Application. Project Report. UTeM, Melaka. (Submitted)

Muhammad Farhan, Wan Jamaludin (2013) Comparison Between Fluorescent Lamp And Led Lamp Using AC Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fuad , Abdul Hadib (2013) The Relationship Between Human Resource Management And Organizational Performance. Project Report. UTeM, Melaka. (Submitted)

Muhammad Haffizal , Bahrom (2013) The Application Of Old And New Seven QC Tools For Achieve Cost Saving In Malaysian Manufacturing. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafiz, Samsudin (2013) Fabrication And Analysis Of Joining Parts For Oil And Gas Piping System. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hafiz , Abd Rahim (2013) Flow modelling of simplified human nasal cavity by using Computational Fluid Dynamics (CFD). Project Report. UTeM, Melaka. (Submitted)

Muhammad Hannan, Kamarzaman (2013) Study And Analysis Of The Engineering Quality Feelings Based On Affective Response To Dimensional Integration Of Product Shapes Design Case Study [Product - Spectacles]. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan, Arzmi (2013) An Integration Of Affective Engineering In Product Design Analysis - [The Using Of Kano Model With Kansei Engineering For Evaluating The Design Product) - Case Study] (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hazwan , Ruslan (2013) Energy From Heat Using Heat Recovery Module. Project Report. UTeM, Melaka. (Submitted)

Muhammad Hilmi Ruzaini , Hashim (2013) Investigation on the effect of recycling palm fiber composite on the mechanical properties. Project Report. UTeM, Melaka. (Submitted)

Muhammad Husnan , Zainal Abdin (2013) Enhancing Material Supply System For Improving The Flow Process Of Assembly Line. Project Report. UTeM, Melaka. (Submitted)

Muhammad Idzdihar , Idris and Faiz , Arith and Siti Amaniah , Mohd Chachuli and Haziezol Helmi, M. Yusof (2013) Universal Mobility-Field Curves For Electrons In Polysilicon Inversion Layer. International Journal of Electrical & Computer Sciences. pp. 36-40. ISSN 2077-1231

Muhammad Iqbal, Sazali (2013) Value Stream Mapping Using Simulation Towards Lean Manufacturing At Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izwan, Ahmad Fuad (2013) Home Electrical Energy Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat , Zainal Abidin (2013) The Implementation Of E-Marketing By Using Search Engine Optimization Strategy As Marketing Tool To Increase Sales Of Health Products In Blogs. Project Report. UTeM, Melaka. (Submitted)

Muhammad Khairul Nizam, Saaey (2013) Effect Of Particulate Reinforcement On The Wear Properties Of Mg-Al Nano Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Mursyid, Roslan (2013) Investigation of Voice of Customers on Hybrid Powered Household Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Muzakkir, Basar @ Sabtu (2013) Home Energy Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nur, Othman and Mohd Shahrieel, Mohd Aras and Fadilah, Abd Azis and Ahmad Nizam, Jamaludin and Mohd Faruq, Abdul Latif (2013) Design A Novel Thruster Magnetism Motor (TMM) For Underwater Vehicle Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Razman, Zulkefli (2013) Learning Keris With Augmented Reality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ridhwan , Johari (2013) Development And Design Analysis Of Experimental Rig To Identify Piezoelectric Actuator's Transfer Function. Project Report. UTeM, Melaka. (Submitted)

Muhammad Sharil, Yahaya and Norhafiz, Salim and Aminurrashid, Noordin and Nurul Ain , Mohd Said and Muhamad Faizal, Yaakob (2013) Stand-Alone Hybrid Photovoltaic-Wind Generation System: Practical Based Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shukri , Ahmad Azazi (2013) Design Optimization Study On The Formula Varsity Car Chassis. Project Report. UTeM, Melaka. (Submitted)

Muhammad Syafiq, Mhd Hussain (2013) Advance Smartphone Classroom Android Application System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Mohd Kamal (2013) Study On The Characteristic Of Current Distribution On Water Due To Short Medium Spark Gap. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Syed Mohamed and Reduan, Mat Dan and Adi, Saptari and Mohamad Lutfi, Dolhalit (2013) Objective And Subjective Assessments Of Vibrating Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Yusuf (2013) Portable Water Level Indicator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Thoriq, Mohamad Zaid (2013) Integrated Electricity Meter And Cost Calculator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yahya, Hamdzani (2013) Gas Leakage And Fire Alert Warning System Via GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusri , Md Yusuf (2013) Effect of stanum on the properties of graphite-stanum composite for bipolar plate. Project Report. UTeM. (Submitted)

Muhammad Zaidan , Abdul Manaf (2013) Pembangunan sistem pendorongan kenderaan hibrid dua alam untuk operasi penyelamat marin (Development of hybrid amphibious vehicle propulsion system for marine safety and rescue operation). Other thesis, UTeM.

Muhammad Zaim, Azamam (2013) Characterization Of Epoxidised Natural Rubber Ethylene Propylene Diene Monomer (ENR-EPDM) Blend Prepared Via Solution Mixing In Toluene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zikrillah , Yunus (2013) CFD analysis of heat source from electric vehicle battery system. Project Report. UTeM. (Submitted)

Muhammad Zuhair Bolqiah, Edris (2013) SIRIM Counterfeit Sticker Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulhaizer, Ab Rashid (2013) Design Of Thermoelectric Energy Harvester Using LTC 3108 Boost Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulhakim, Sharudin (2013) Contaminant removal for different geometry of cavities with high Reynolds number using fluent. Project Report. UTeM, Melaka. (Submitted)

Muhammad Zulhilmi, Jamil (2013) KalimahAR : Augmented Reality Mobile Translator Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Khairi, Abd Rahim (2013) Implementation Of Direct Torque Control Of Induction Machines Utilizing ezDSP F28335 And FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Zulpattah , Mohd Yusoff (2013) Transition Of Engine Powered Air-Conditioning System To The Solar Powered Air-Conditioning System In A Bus : A Feasibility study. Project Report. UTeM, Melaka. (Submitted)

Muhsen Alhayali, Zaid Ahmed (2013) Implementation of renewable energy concept in the automotive in Malaysia An exploratory study. Masters thesis, UTeM.

Munirah, Mohd Aris (2013) Optimization Of Performace Of VoIP Across WLAN, WiMAX And Integrated WLAN-WIMAX Networks Using OPNET MODELER. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustaffa, Izadora (2013) The effect of sound levels on attention deficit. In: 2013 International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering, 7-8 November 2013, Bandung Indonesia.

Mustapha, Ain Atiqa and Mat Ali, Noraini and Kok, Swee Leong (2013) Experimental Comparison of Piezoelectric Rectifying Circuits for Energy Harvesting. In: IEEE SCOReD 2014, 16 - 17 December 2013, Putrajaya.

Mustapha, Ain Atiqa and Mat Ali , Noraini and Kok, Swee Leong (2013) Piezoelectric Microgenerator Rectifying Circuit Simulation Using LTspice. In: 2nd International Conference on Advances in Electronic Devices and Circuits (EDC 2012), 5 May 2013, Kuala Lumpur.

Musthafah, Mohd. Tahir and Muhammad Zahir, Hassan and Noreffendy, Tamaldin and Safarudin Gazali, Herawan (2013) Design and Analyze Possible Energy for a Heat Recovery System in Passenger Car Engine Compartment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzaffar, Mohamad (2013) Mini Spy Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzalifah , Mohd Said and Afifah Maheran, Abdul Hamid and Zul Atfyi Fauzan, Mohamed Napiah and Norhidayah, Mohamad Yatim and Zarina , Mohd Noh (2013) Design And Analysis An Ultra Thin Diaphragm Of Optical Pressure Sensor For In-Vivo Medical Diagnosis And Therapy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzalifah , Mohd Said and Afifah Maheran, Abdul Hamid and Zul Atfyi Fauzan, Mohammed Napiah and Nurliyana , Abd Mutalib and Nur Fatihah, Azmi (2013) Study And Modelling High-K Material For Nanoscale Gate CMOS Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

motlagh, o and nakhaeinia, n and tang, s.h. (2013) Automatic Navigation of Mobile Robots in Unknown Environments. Neural Computing and Applications. xxxx-xxxx. ISSN xxxx-xxxx

motlagh, o and jamaludin, z (2013) An Agile FCM for real-time modeling of dynamic and real-life systems. Evolving Systems: Special Issue on Temporal Aspects in Fuzzy Cognitive Maps. xxxx-xxxx. ISSN 1868-6478

motlagh, o and tang, s.h. and Maslan, Mohd Nazmin and Jafar, Fairul Azni and Aziz, Maslita (2013) A novel graph computation technique for multi-dimensional curve fitting. Connection Science, 25 (2-3). pp. 129-138. ISSN 0954-0091 (Print), 1360-0494 (Online)

N

NORDDIN, NURBAHIRAH and Abdullah, Abdul Rahim and Zainal Abidin, Nur Qamarina and Aman, Aminudin (2013) High Voltage Insulation Surface Condition Analysis using Time Frequency Distribution. AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, 7 (7). pp. 833-841. ISSN 1991-8178

NORDDIN, NURBAHIRAH and Abdullah, Abdul Rahim and Zainal Abidin, Nur Qamarina and Aman, Aminudin and Ramani, Anis Niza (2013) Polymeric Insulation surface condition Analysis Using Linear Time Frequency Distributions. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3-4 June 2013, Langkawi, Malaysia.

Nabil Fikri , Ahmad (2013) Fuel characteristics of biodiesel from waste vegetables oil using alkaline based catalysts. Project Report. UTeM, Melaka. (Submitted)

Nabila, Ruslan (2013) Performance Analysis Of Video Conferencing Software In Technology 802.11N. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nabila Farhana , Mohamad Isa (2013) Sustaining Competitive Advantage Through Marketing Strategy : Case Study Of MCIS Safety Glass Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Nadia, Baharuddin (2013) An Analysis Of Heartbeat Monitoring Using Microwave Doppler Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadiah, Hussin (2013) Kukuh Saya Dan Cekap Matematik Tahap 1 : Teknik Interaktif. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naim Hadi , Darsono (2013) Optimization of decentralize network for resource sharing. Project Report. UTeM. (Submitted)

Nair, Ravin and Jidin , Auzani and Othman, Md Nazri and JOPRI, MOHD HATTA and Manap, Mustafa (2013) Comparison Performance of 3-Level and 5-Level Cascaded H-Bridge Multilevel Inverter of DTC of Induction Machine. In: 2013 International Conference on Electrical Machines and Systems (ICEMS), 26-29 October 2013, Busan, Korea.

Najiahtul Syafiqah, Ismail (2013) Investigating Droidkungfu Android Malware Behaviour Through Static Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Najmiah Radiah, Mohamad (2013) Analytical Study Of Light And Liquid Crystals Reorientation In Anistropic Photonic Crystals Using One-Dimension Finite Difference Time Domain (FDTD) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najmiah Radiah, Mohamad and A.S.A.M, Soh and Azahari, Salleh and Nik Mohd Zarifie, Hashim and Mohamad Zoinol Abidin, Abd Aziz and Nuraishah, Sarimin and Adib, Othman and Z.A, Ghani (2013) Development Of Aquaponic System Using Solar Powered Control Pump. IOSR JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING (IOSR-JEEE), 8. pp. 1-6. ISSN 2320-3331

Nalini , Subramaniam (2013) Managing 5S In Malaysian Automotive Industry. Project Report. UTeM, Melaka. (Submitted)

Narishah, Mohamed Salleh (2013) Transformational of conventional wafer defect disposition system info web base application to improve manufacturing performance. Masters thesis, UTeM.

Nattni, Ainim (2013) Developing Accelerometer Sensor System For Instantaneous Mapping Acceleration Of 1DOF Elbow Joint For Exoskeleton Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazirah, Makhtar (2013) Design And Characterization Of Vertical Strained Silicon MOSFET Incorporating Dielectric Pocket By Using TCAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazrin, Othman (2013) Shopping Cart Anti-Theft Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazrul Affendi, Che Ibrahim (2013) Modeling 3D Wings Like Object Based On Finite-Different Time-Domain (FDTD) Method In Graphical User Interface For Radar Cross Section (RCS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazuha, Shaari (2013) Narrow Band Field Measurement Generated By Lightning Flashes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Neoh , Thiam Hwa (2013) Design and simulation of die and punch for sheet metal on bending. Project Report. UTeM. (Submitted)

Ng, Rhun Hock (2013) Modeling And Analysis Of Swine Skin Biometrics Found On Leather Products. Project Report. UTeM, Melaka. (Submitted)

Ng, Bee Tyng (2013) Productivity Improvement By Using Lean Six Sigma Approach (A Case Study At Furniture Company). Project Report. UTeM, Melaka. (Submitted)

Ng, K.C. and Chong, Kuan Eng and Goh, G.G.G. (2013) Total Productive Maintenance Strategy in a Semiconductor Manufacturer: A Case Study. In: 2013 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, 3-4 Jun 2013, Bayview Hotel Langkawi.

Ng, K.C. and Lim, C.P. and Chong, Kuan Eng and Goh, G.G.G. (2013) Elimination of Waste through Value Add/Non value Add Process Analysis to Improve Cost Productivity in Manufacturing - A Case Study. In: 2013 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING AND ENGINEERING MANAGEMENT, 10-13 Dec2013, Bangkok, Thailand.

Ng, Sze Ling (2013) Design And Simulation Of Three Dimensional Bending Machine. Project Report. UTeM, Melaka. (Submitted)

Ng, Tech Chyan (2013) Augmented reality art book with interaction to promote Malaysia traditional game. Project Report. UTeM. (Submitted)

Ng , Sing Liang (2013) Cartoon avenger mobile application. Project Report. UTeM. (Submitted)

Ng, , Wei Tat (2013) The evaluation of machinability and surface roughness in conventional milling machine. Project Report. UTeM, Melaka. (Submitted)

Nik Azran , Ab Hadi (2013) Impact of wave power generator on local distribution. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nik Nursyifa , Nik Mohd Fauzi (2013) The effectiveness of advertisement types to student's perception in fast food Restaurants of McDonald's Sdn. Bhd. Project Report. UTeM. (Submitted)

Noor Anis, Baharudin (2013) Bijak Kira Matematik Tahap 1 : Metafora Permainan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Ashikin , Jamil (2013) The effect of heat treatment on the microstructure and mechanical properties of 6061 aluminium alloy. Project Report. UTeM, Melaka. (Submitted)

Noor Ashikin , Yusof@Yusoh (2013) A Study To TQM Implementation In Minimizing Products Rejection : The Case Of BI Technologies Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Noor Athira, Abidullah (2013) Design And Development Of Real Time Power Quality Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azam, Ahmad Faiz and Jidin , Auzani and Said, Mohamed Azmi and JOPRI, MOHD HATTA and Manap, Mustafa (2013) High Performance Torque Control of BLDC Motor. In: 2013 IEEE - International Conference on Electrical Machines and Systems (ICEMS), 26-29 October 2013, Busan, Korea.

Noor Azam, Ahmad Faiz and Jidin, Auzani and Ngatiman, Nor Azazi and Jopri, M.H and Manap, Mustafa and Lukar Herlino, Adeline and Alias, Nor Faezah (2013) Current Control of BLDC Drives for EV Application. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Noor Azam, Ahmad Faiz and Jidin , Auzani and Ngatiman, Nor Azazi and JOPRI, MOHD HATTA and Manap, Mustafa and Lukar Herlino, Adeline and Alias, Nor Faezah (2013) Current Control of BLDC Drives for EV Application. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Noor Azam , Jaafar (2013) Mobile vacuum cleaner robot (MVCR)Effect of wire-EDM parameters on machining characteristics of titanium alloy (Ti6AI4V) using Taguchi method. Masters thesis, UTeM.

Noor Azamiah, Md Fauzi (2013) Design Of Nonlinear Frequency Selective Limiter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azliana , Saari (2013) The Effectiveness Of Selection Method On Seeking Talent. Project Report. UTeM, Melaka. (Submitted)

Noor Azlin, Bidin and Safiah , Sidek (2013) Kemahiran Komunikasi. In: Kemahiran Insaniah: 7 Kompetensi Unggul Mahasiswa. Penerbit Universiti, UTeM, pp. 1-49.

Noor Azrie Izzati, Noor Azman (2013) Effect Of The Video Resolution On Quality Of Experience In Wireless Multimedia Streaming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azwan, Shairi (2013) Simulation and Analysis of Phase Noise Distortion in RF Transceiver of IEEE 802.11 a WLAN Bridge System. International Journal of Recent Technology and Engineering. pp. 28-32. ISSN 2277-3878

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong (2013) Bandstop To Allpass Reconfigurable Filter Technique In SPDT Switch Design. Progress In Electromagnetics Research C, 39. pp. 265-277. ISSN 1937-8718

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong (2013) SPDT Discrete Switch Design using Switchable Radial Stub Resonator for WiMAX and LTE in 3.5 GHz Band. In: 2013 IEEE International RF and Microwave Conference (RFM2013),, 9 - 11 Dec 2013, Penang, Malaysia.

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong (2013) Switchable Radial Stub Resonator for Isolation Improvement of SPDT Switch. International Journal of Engineering and Technology, 5 (1). pp. 460-467. ISSN 0975-4024

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong and Zakaria, Zahriladha (2013) Design and Analysis of Isolation Improvement and Compact Size of SPDT Switch with Switchable Open Stub Resonator for Wireless Communication. International Journal of Electronics and Computer Science Engineering, 2 (1). pp. 9-17. ISSN 22771956

Noor Baizura , Muhammad (2013) Customer Satisfaction Towards Service Quality Of Staffs At Fast Food Restaurant In Melaka. Project Report. UTeM, Melaka. (Submitted)

Noor Emma, Ismail (2013) Social Impact Of Customer Acceptance To Technology Innovation In Melaka. Project Report. UTeM, Melaka. (Submitted)

Noor Fareeza , Amran Samsudin (2013) Simulation Design On Water Level Control System. Project Report. UTeM, Melaka. (Submitted)

Noor Fatin, Ab Abas (2013) Analysis Of Bending And Straight Waveguide Using Matlab And Graphical User Interface (GUI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Idayu, Ahmad (2013) In Hub Of Switch Reluctance Motor Design For Arm Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooraisyah, Arasid (2013) Three Bit Subtraction Circuit Via Field Programmable Gate Array (FPGA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooranith Shazni , Khairul Azuar (2013) Prototyping A Miniature Airborne Robot. Project Report. UTeM, Melaka. (Submitted)

Noorasikin, Abdul Rahman (2013) A Study On The Key Criteria That Contribute To The Manufacturing Company Sustainability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorfaizol, Mohamad Noor (2013) Fabrication Of Titanium Dioxide (TiO2) By High Temperature Oxidation Of Physical Vapour Deposition (PVD) Titanium Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorshahirah , Masat (2013) Simulation Design On Water Flow Control System. Project Report. UTeM, Melaka. (Submitted)

Noorzalika, Mohammed Ghazali (2013) Value Creation Research And Development (R&D). Project Report. UTeM, Melaka. (Submitted)

Nor Abidah, Abdul Aziz (2013) The Potential Of Epoxidized Natural Rubber As Hydrophobic Contributor In Biodegrdable Urea Fertilizer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Affendy, Norizan (2013) A Study And Analysis Of Product Design And Development Using Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Afifah, Mat Nawi (2013) Effect Of The Video Encoding Scheme On Battery Consumption Of Mobile Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Aiza, Moketar (2013) Automated Acceptance Testing Tool For Requirements Validation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nor Aqilah, Sumadi (2013) Matematik Tahap 1 : 2D Animasi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Arliza, Abdullah (2013) Developing A Wireless Penetration Testing Tool In Linux Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Asmaa Alyaa, Nor Azlan (2013) Assessment Of Manufacturing Facility Layout Using Systematic Layout Planning (SLP) Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Asmida, Husin (2013) Implementing The Quality Improvement Initiatives To Enhance The Performance Of employees : The Case Of BI Technologies Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Nor Asmida, Husin (2013) Implementing The Quality Improvement Initiatives To Enhance The Performance Of employees : The Case Of BI Technologies Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Nor Atiqah , Jaafar Sidek (2013) Effect Of EDM Die Sinking Parameters On The Material Characteristics Of Aluminium Alloy LM6 Using Graphite Electrode. Project Report. UTeM, Melaka. (Submitted)

Nor Azizah , Mohd Yusoff and Abdul Karim, Kasrul and Ab Ghani, Sharin (2013) A Review of Finite Element Method in Detecting Incipient Faults Occur in Power Transformer. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

Nor Azmmi , Masripan (2013) Effect of surface transformation and transfer layer on friction of carbonaceous hard coatings. PhD thesis, UTeM.

Nor Azrin, Nozmi (2013) Study on surface retrogression and re-aging (SRRA) behaviour of aluminium alloy 7075. Masters thesis, UTeM.

Nor Faizah, Haminudin (2013) Effect Of Nanoclay Loading On Natural Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farahani, Jusoh (2013) Monitoring DNS Traffic Through Google Maps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farhyne , Mohd Kamil (2013) Identifying The Key Successful Factors In Franchise Business Among Entrepreneurs : A Case Study In Seremban Negeri Sembilan. Project Report. UTeM, Melaka. (Submitted)

Nor Fariha, Sohod (2013) Thermal Behavior Of Natural Fiber Mat Hybrid Composite For Tooling Materials. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Fazielah , Darwis (2013) Preliminary Investigation Of Laser Joining. Project Report. UTeM, Melaka. (Submitted)

Nor Haizatul Akma, Mohd Yusof (2013) Mobile application based learning : mari belajar solat. Project Report. UTeM. (Submitted)

Nor Halida Ilyani, Kamarudin (2013) Effect Of EDM Die-Sinking Parameters On The Material Characteristics Of Aluminium Alloy LM6 Using Cooper Tungsten. Project Report. UTeM, Melaka. (Submitted)

Nor Hazwani , Musa (2013) The Relationship Between Job Stress Level And Job Satisfaction Level Of Teachers : A Case Study At Sek. Men. Kebangsaan Sri Muar, Johor. Project Report. UTeM, Melaka. (Submitted)

Nor Rafika, Nor Hamid (2013) Identification Of Intermetallic Compound At Cu Wire – Al Bond Pad Interface By Using X-Ray Diffraction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Shahirah, Aladdin (2013) Productivity Improvement Through Application Of Lean Manufacturing Concept : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syamimi , Zulkifli (2013) Driving license application (DriveApps). Project Report. UTeM. (Submitted)

Nor Syazwani , Mohd Ridzun (2013) Numerical modelling of 1-dimensional wave equation using finite difference scheme. Project Report. UTeM, Melaka. (Submitted)

Nor Syazwani Haziqah, Abdul Rahman (2013) Properties Of Chemically Modified Graphene Through Thermal, Compositional And Morphological Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Zaidi , Haron and Norsuhaidah , Arshad and Sukreen Hana , Herman (2013) Detecting Resistive-Opens in RRAM using Programmable DfT Scheme. In: 5th Asia Symposium on Quality Electronic Design, 26-28 August 2013, Penang, Malaysia.

Nor Zaidi , Haron and Muhammad Bukhari, Mohter and Siti Aisah , Md Junos@Yunus and Mohamad Isa, Mohd Sa'ari and Yahaya , Abd Rahim (2013) SAFe: A Secure and Fast Auto Filling Form System. In: 2013 IEEE Symposium on Industrial Electronics & Applications (ISIEA2013) , September 22-25, 2013, Kuching, Malaysia.

Nor'Ain, Ibrahim (2013) Intelligence RF Traffic Light Control For Ambulance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraida, Abdul Aziz (2013) Investigation Of Influence Of Slender Cutting Tool And Cutting Parameters On Product Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraidah, Blar (2013) Development Of An Automatic Rewinding Machine For Cable Tape Considering Affective Analysis. Project Report. UTeM, Melaka. (Submitted)

Noraina, Abdullah (2013) Power Stability Optimization On Grid Connected With Solar And Wind Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraini, Sulaiman (2013) Surface Integrity of Aluminium Lm6 Alloy When Machine with the High Speed Steel and Uncoated Carbide Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norairin, Mahmat Sani (2013) Energy Detection Method In Cognitive Radio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norashikin, Zainal (2013) Flow Process Improvement Through Simulation In Electrical Part Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasiken , Bakar and Hyreil Anuar, Kasdirin and Faaizah, Shahbodin and Rabiah, Ahmad and Sazilah, Salam (2013) 3D Courseware For UTeM Student : Electromagnetic Subject. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noratikah, Azhar (2013) Interaction Between Virtual Object And Real Environment (Learning Alphabet Using Augmented Reality). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlin, Ajali (2013) Large Scale Heat Treatment Of Aluminium Alloy 1050 H24 For Forming Process. Project Report. UTeM, Melaka. (Submitted)

Norazlinda , Ibrahim (2013) Ecar UTeM. Project Report. UTeM. (Submitted)

Nordiyanna, Norazemi (2013) Modeling of Stress Developed During Intermetallic Compound Growth at Cu Wire–Al Bond Pad Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norezmi, Md Jamal (2013) Piezoelectric Storing Circuit Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfauzan, Rahman (2013) Automatic Accident Detector And Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhakeem, Mustapa (2013) Fire Fighting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah, Mohamad Yatim and Noor Mazlina, Mahmod and Lizawati, Salahuddin and Nor Haslinda, Ismail and Muhammad Noorazlan Shah, Zainudin (2013) Preschool Children Safety Network With Message Service System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norida, Abdullah (2013) Modul Teras Kebudayaan. Majlis Kokurikulum Univerisiti-univeriti Malaysia (UniCC), Jabatan Pengajian tinggi Malaysia. ISBN 978-967-0334-68-4

Norida, Abdullah (2013) Modul Teras Keusahawanan. Kementerian Pengajian Tinggi, Kuala Lumpur. ISBN 978-967-0334-67-7

Norida, Abdullah (2013) Modul Teras Khidmat Komuniti. Kementerian Pengajian Tinggi, Kuala Lumpur. ISBN 978-967-0334-66-0

Norida, Abdullah (2013) Modul Teras Sukan. Kementerian Pengajian Tinggi, Kuala Lumpur. ISBN 978-967-0334-69-1

Norizatulhuda , Razali (2013) Managing Conflict In Cross Functional Project Teams : Case Study At Modenas. Project Report. UTeM, Melaka. (Submitted)

Norlia, Badri (2013) Notification System For Medicine Kit Using GSM Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsha Hira, Abdul Ghani (2013) Machine Tool Rigidity When Turning Using Varies Length And Diameter Of Workpiece. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norshafika , Rahmat (2013) A Case Study Of Cross-Functional Teamwork Factors In Determining New Product Performance In Mitsubishi Electric (Malaysia) Sendirian Berhad. Project Report. UTeM, Melaka. (Submitted)

Norshuhada , Ahmad Dayarbi (2013) Malaysia Food Manufacturing Strategy In Achieving Sustainable Performance : A Case Of Jalen Sdn Bhd. Project Report. UTeM, Melaka. (Submitted)

Nur Adilah, Ismail (2013) Identifying The Perception Of Consumer Behavior Towards The Hybrid Car. Project Report. UTeM, Melaka. (Submitted)

Nur Afiqah, Abdul Latif (2013) Application Of 7QC Tools To Improve Yield Performance Of Label Stock Product At ABC Company Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ainne, Hazemi (2013) RFID Based Smart Ordering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aizat, Embok Cheni (2013) The Development Of Static Diving System Using Ballast Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aizat, Embok Cheni (2013) The Development Of Static Diving System Using Ballast Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Al Hafizuddin , Mohd Arabai (2013) Stamp forming behaviour of palm fiber composite. Project Report. UTeM, Melaka. (Submitted)

Nur Amira, Ahmad Faiz (2013) Balanced Mixer Design For Wimax Tranceiver Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ani, Nasrudin (2013) Design And Simulation Of Dc-Dc Switching Boost Converter For Current Ripple Reduction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aqilah, Ya'kob (2013) Synthesis And Characterization Of Light Weight Natural Foam From CSM Coconut Fiber Filled Polyurethane For Acoustic Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asilah, Mastuki (2013) A Customer Affective Quality Analysis Using Analytical Hierarchy Process (AHP) In The Product Development Case Study (Product - Pen). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azila, Awang Md Isa (2013) Modeling Planar Inverted F Antenna Based On 3D Finite Difference-Time Domain (FDTD) Method In Grapichal User Interface (GUI) For Radiation Pattern Evaluation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Azri, Mahmud (2013) Key Success Factors In Business Incubation Among Incubators In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Nur E'zzati, Md Faisol (2013) Hypermarket Products Search Mobile Application (Android). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farahin, Mohd Hayat@Ahmad (2013) A Study Of Working Posture And Psychophysical Experience In Stamping Die Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farizan, Ayoob (2013) The Effect Of Colouring Agent (Fe2O3) On The Physical And Mechanical Properties Of Glass Ceramic Produced By Recycling Waste Glass. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Fatehah , Harun (2013) The Optimization Of Warehouse Management System (WMS) To Increase The Efficiency & Effectiveness Of Production Process In An Automotive Company. Project Report. UTeM, Melaka. (Submitted)

Nur Hamirudin , Ismail (2013) 3D animation with stereoscopic 3D : silent killer. Project Report. UTeM. (Submitted)

Nur Haziq Hilmi, Adzhar (2013) Performance analysis of existing in the market the so called "energy saving device". Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hazwani, Janudin (2013) An Investigation Of Electromagnetic Effect On Human Cell. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah, Mahmud (2013) Designing 2.45GHZ Rectenna For Low Voltage Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hidayah, Mohd Amir (2013) Automated Egg Incubator (AEI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Ilmi , Mohamad Roslan (2013) A Non-Destructive Test Crack Detection Method Using Vibration Acoustic On Aluminium Plate. Project Report. UTeM, Melaka. (Submitted)

Nur Ilyana, Roslan (2013) Case Study For Improvement On Led Testing Equipment Using Statistical Process Control At OSRAM OPTO Semiconductor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izni, Roslan (2013) Initial Observation Of Energy Conversion By Using Rectenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izzati Nadzirah , Harun (2013) Sexual harassment and its implication on performance : a study of private organization. Project Report. UTeM. (Submitted)

Nur Mysarah , Mohd Nasir (2013) The Consumer's Personal Environmental Awareness Towards Sustainable Marketing Program At TESCO, Melaka. Project Report. UTeM, Melaka. (Submitted)

Nur Nabila, Mahazid (2013) Effect Of Different Atmosphere For Different Sintering Temperature On Physical And Mechanical Properties Of Sub Micron WC-Co Powder Through The Powder Metallurgy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nabilah Farhana, Sulaiman (2013) Surface Integrity Of Aluminum Alloy LM6 When Machine With Coated High Speed Steel And Coated Carbide Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sabrina , Basharuddin (2013) A study on the effects of parameters for optimizing biodiesel production. Project Report. UTeM, Melaka. (Submitted)

Nur Sakinah, Abdul Razak (2013) GPS Lock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Shahidah , Abdissalam (2013) Redesign And Development Of Automatically Adjustable Rostrum. Project Report. UTeM, Melaka. (Submitted)

Nur Sufiah Akmala, Ramdan (2013) Estimation Of Configuration Workspace For A Robot-Controlled Vision Inspection System. Project Report. UTeM, Melaka. (Submitted)

Nur Suhaila, Muhammad (2013) Preparation Of Recycling Chip Aluminium (Al 6061) Through Powder Metallurgy Route. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syafiqah, Abdul Rahim (2013) Risk Assessment On Palm Oil Industry Jobs Using HIRARC Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syaheera, Ahmad (2013) Ergonomic Design Of Computer Numerical Control Milling Machine Using Quality Function Deployment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syuhada, Hasimuddin (2013) Ergonomic Development Of Shoe Sole Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur'Ain, Fadzil (2013) Mobile Application For Children With Autism : Mari Membasuh Tangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuradila , Harun (2013) Analysis Of Wave Amplitude Modulation Effect For Various Crack Lengths In Vibro Acoustic Inspection Method Simulation Approach. Project Report. UTeM, Melaka. (Submitted)

Nurain, Othman (2013) Analysis Of Power Consumption By Using Programmable Logic Controller (PLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuraini , Abd Latif (2013) Ergonomics Design Of Baby Carrier. Project Report. UTeM, Melaka. (Submitted)

Nuramalina, Mat Serah (2013) Change Detection On Klang Area Using Landsat S-TM Data. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurashikin , Mohammad Yusof (2013) Analysing Consumer Behaviour On Development Of Digital Water Meter (DDWM) In Market Place : Malacca. Project Report. UTeM, Melaka. (Submitted)

Nuraslinda, Adnan (2013) Effect Of Terrain Features On Wave Propagation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfah Nabilah , Mohd Fadzil (2013) The Impacts Of Industrial Training Program Towards Enhancing The Performance Of Undergraduate Students. Project Report. UTeM, Melaka. (Submitted)

Nurfarah Ain, Abd Razak (2013) Analysis Of Winding And Core Types To The Performance Of The High Frequency Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfarahana, Simun (2013) Evaluation Of Psychophysical Experience And Heart Rate Of Malaysian Female While Manual Lifting Activities. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfarahin , Sulaiman (2013) Improvements Of Wheel Nuts Remover. Project Report. UTeM, Melaka. (Submitted)

Nurfatin Zayani, Sahar (2013) Online Virtual Classroom. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhafizah, Ismail (2013) Analisis Dinamik Kereta Lumba "Formula Varsity 2012". Project Report. UTeM, Melaka. (Submitted)

Nurhasanah , Muhammad (2013) Implementation Of Integrated Marketing Communication And The Effect Toward Brand Equity. Project Report. UTeM, Melaka. (Submitted)

Nurkhairunnisa, Rafizi (2013) Dimensions Of Service Quality In Enhancing Supply Chain Management For Courier Service Industry In Malaysia. Project Report. UTeM, Melaka. (Submitted)

Nurlayana, Muty (2013) The Gene Exploration Of Chronic Diseases. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurnasriq, Rosidi (2013) 3D Animation Video As A Tool To Increase 12 Principles Of Animation Knowledge. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursaiyidah, Salim (2013) Design Of Reconfigurable Defected Ground Structure For UWB Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nursakinah , Mahmud (2013) Analysis Of Wave Amplitude Modulation Effect For Variable Crack Orientations In Vibro Acoustic Inspection Method : Simulation Approach. Project Report. UTeM, Melaka. (Submitted)

Nursyahmi, Abdul Sukor (2013) Real-Time Monitoring System For Nursing Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul A., Emran (2013) Handling Failures in Data Quality Measures. GSTF Journal of Computing, 2 (4). pp. 18-23. ISSN 2010-2283

Nurul A., Emran and Abdullah, Noraswaliza (2013) Storage Space Optimisation for Green Data Center. Procedia Engineering , 53 . pp. 483-490. ISSN 1877-7058

Nurul A., Emran and Ahmad, N. (2013) Reference Architectures to Measure Data Completeness Across Integrated Databases. Lecture Notes in Artificial Intelligence, Subseries of Lecture Notes in Computer Science, 7803. pp. 1-559. ISSN 978-3-642-36542-3

Nurul A., Emran and Aziz, A. A. and Jusoh, J. A and Idris, W. M. R. W. and Hassan, H. (2013) Implementing Aproiri Algorithm for Predicting Result Analysis. GSTF Journal of Computing, 2 (4). pp. 87-92. ISSN 2010-2283

Nurul A., Emran and Muda, A. K. (2013) Measuring Data Completeness for Microbial Genomics Database. Lecture Notes in Artificial Intelligence, Subseries of Lecture Notes in Computer Science, 7803. pp. 1-559. ISSN 978-3-642-36542-3

Nurul Adlina, Mohammad Jamil (2013) The Determination Of Inconsistency Quality Cutting Of Composites Part At Abrasive Waterjet Trim Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Afiza, Othman (2013) Development Of Anti-Theft Vehicle And Gps Locator Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain, Mat Arham@Elham (2013) Real Time Flood Hazard Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain, Suhaimi (2013) Development Of AC-DC Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Megat Zabidi (2013) Product Identification For Storage System Using MATLAB. Project Report. UTeM, Melaka. (Submitted)

Nurul Aini, Ahmad (2013) Overall Equipment Effectiveness Optimization (OEE) In Semiconductor Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Akmar, Emran and Noraswaliza, Abdullah and Nuzaimah, Mustafa (2013) Characterisation Of Data Set Features For Storage Space Optimisation Using Functional Dependency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Amiza, Amir Hamzah (2013) Development Of Source Separation Algorithm In Audio Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azita , Yunos (2013) The Effectiveness Of Recruitment Method In Hotel Organisation. Project Report. UTeM, Melaka. (Submitted)

Nurul Azlina, Redzuan (2013) A Smart Support Tool For PSM Title Similarity Check Using Information Visualization Technique (smartTIC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Farah Atiqah , Rozahi (2013) Development Of Wireless Network Using Zigbee. Project Report. UTeM, Melaka. (Submitted)

Nurul Hafizah , Md Nasruddin (2013) Success Factors Of Women Entrepreneurs In Business. Project Report. UTeM, Melaka. (Submitted)

Nurul Hashimah , Jaffar (2013) The Determinants An Organization Culture That Inflence Of Creativity And Innovation Product For Small Medium Enterprise (SMEs). Project Report. UTeM, Melaka. (Submitted)

Nurul Hasliza, Mat Yusoff (2013) Preparation And Characterization Of Chitosan Powder From Shrimp Shells. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hazwani, Che Hashim (2013) Fingerprint Attendance System Using Zigbee Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hidayah, Mohd Nor (2013) Design And Development Of A Three Phase Shunt Active Filter Based On P-Q Theory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Husna, Abdul Khalil (2013) Wireless Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Iziana , Mohamed Nor (2013) Effectiveness Of Using Social Media For Creating E-Business, A Case Of Facebook. Project Report. UTeM, Melaka. (Submitted)

Nurul Izzati, Mohamad (2013) Energy-Efficient Led Lighting System For Residential Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Muzanil, Mustaffa (2013) Evaluation Of Psychophysical Experience And Heart Rate Of Malaysian Male While Manual Lifting Activities. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Shazwani , Mohtar (2013) Ease Of Use, Usefulness, Information Quality, And Feeling As Determination Of Facebook Usage Intention Among Student Of Universiti Teknikal Malaysia Melaka. Project Report. UTeM, Melaka. (Submitted)

Nurul Syaffinaz, Muttakal (2013) The Acoustic Treatment & Speech Intelligibility Quality Analysis Of Masjid UTeM Using Advance Tool Simulation And Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda, Mostafa (2013) The Effect Of Spent Bleach Earth (SBE) WT %On The Physical And Mechanical Properties Of Sintered Glass Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

O., Nooririnah and Abdullah, Rohana and A.Y, Khalil and M.S, Aludin (2013) OVERVIEW POTENTIAL APPLICATIONS OF COLD SPRAY PROCESS FOR AVIATION INDUSTRY IN MALAYSIA. Advanced Material Research, 701. pp. 375-377. ISSN 1022-6680

Ohara, Kenji and Masripan, Nor Azmmi and Umehara, Noritsugu and Kousaka, Hiroyuki and Tokoroyama, Takayuki and Inami, Shigeru and Zushi, Koji and Fujita, Masahito (2013) Evaluation Of The Transformed Layer Of DLC Coatings After Sliding In Oil Using Spectroscopic Reflectometry. Tribology International, 65. pp. 270-277. ISSN 0301-679X

Omar, Nooririnah and Abdullah, Rohana and ABD RAZAK , JEEFFERIE and Mustafa, Nuzaimah (2013) A REVIEW ON SUPERSONIC PARTICLE DEPOSITION AS POTENTIAL SOLUTION FOR AIRCRAFT METAL MOLD REPAIR. Global Engineers & Technologists Review, 3 (2). pp. 14-16. ISSN 2231-9700

Omar, Nooririnah and Abdullah, Rohana and Mustafa, Nuzaimah and Azhari, Muhammad azwar (2013) REVIEW ON HIGH PRESSURE COLD SPRAY (HPCS) PROCESS AS CORROSION TREATMENT FOR AGING AIRCRAFT PART. In: International conference on engineering education 2013 , 23-25/12/2013, Madinah. (Submitted)

Omar, Nooririnah and Azhari, Muhammad azwar and Yusuf, Yusliza (2013) Effect of CO2 Flow Rate on the Synthesis Nanosized Precipitated Calcium Carbonate, PCC. Applied Mechanics and Materials. pp. 72-75. ISSN 1660-9336

Omar, Khairuddin and Azmi, Mohd Sanusi and Nasrudin, Mohammad Fadizul and Salleh, Abdul Razak and Abdullah, Azizi (2013) Batu Bersurat Piagam Terengganu. Batu Bersurat Terengganu: Perspektif Geometri Segitiga. In: Batu Bersurat Piagam Terengganu. Percetakan Yayasan Islam Terengganu Sdn Bhd, Terengganu , pp. 82-95. ISBN 978-983-43021-3-9

Omar, Khairuddin and Azmi, Mohd Sanusi and Nasrudin, Mohammad Faidzul and Che Wan Ahmad, Che Wan Shamsul Bahrin and Abdullah, Azizi (2013) Baru Bersurat Terengganu: Perluasan Model Segitiga dalam Kajian Digital Paleografi Digital. In: Batu Bersurat Piagam Terengganu. Percetakan Yayasan Islam Terengganu Sdn Bhd, Terengganu , pp. 190-202. ISBN 978-983-43021-3-9

Omar, Rosli and Rasheed, Mohammed and Sulaiman, Marizan (2013) Fundamental Studies of a Three Phase Cascaded H-Bridge and Diode Clamped Multilevel Inverters Using Matlab/Simulink. International Review of Automatic Control (IREACO), 6 (5). pp. 618-625. ISSN 1974-6059

On , Yuen Foong (2013) E-Labtest System For BITP 2303 Database Programming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Phaik Ling and Choo, Yun Huoy and Nurul A., Emran (2013) Classification of SNPs for Obesity Analysis using FARNeM Modelling. In: ISDA 2013, Dec. 8-10, 2013, UPM, Malaysia.

Ong , Teik Kean (2013) Compact Multiband Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong , Phaik Ling (2013) Classification of SNPs for obesity analysis using FARNeM modelling. Project Report. UTeM. (Submitted)

Ooi, Bun Jian (2013) Managing The Transition Of Fossil Fuels To Renewables Energy : Application Of Ocean Thermal Energy Conversion At Sabah. Project Report. UTeM, Melaka. (Submitted)

Ooi, , Su Guan (2013) Effect of gold treatment on the mechanical properties of 316L stainless steel. Project Report. UTeM, Melaka. (Submitted)

Or, , Khai Hee (2013) A low noise duct ventilation using C- transition curve design. Project Report. UTeM, Melaka. (Submitted)

Osman, Khairuddin and Mohamad, Syahrul Hisham and Jaafar, Hazriq Izzuan (2013) A Preliminary Study of Wood Species Classifacation System Based on Wood Knot Texture Using K-Nearest Neighbour With Optimized Features From Binary Magnetic Optimization Algorithm Selection. In: Science & Engineering Technology National Conference 2013, 3-4 July 2013, Kuala Lumpur, Malaysia..

Othman, Norazimah (2013) Types of university-industry collaboration in universities in Malaysia. Masters thesis, UTeM.

Ow, Li Lee (2013) Sweet Heart Baby Location Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

P

Palaniapan , Shamala and Rabiah, Ahmad and Mariana, Yusoff (2013) A conceptual framework of info structure for information security risk assessment (ISRA. Journal of Information security and applications. pp. 45-52. ISSN 22142216

Patricia, Pati (2013) Development Of Monitoring System Of Automatic Plant Irrigator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Peh, Thai Ee, Perly and Choo, Yun Huoy and Burhanuddin , Mohd Aboobaider (2013) Cloud-Mobi Framework using hybrid AHP-ACO method for Social Interaction and Travel Planning. In: ISDA 2013, Dec. 8-10, 2013, UPM, Malaysia.

Perdana, Ryan Aditya (2013) The effectiveness of strategic partnership in conducting Malaysian fast food franchise industry in Indonesia. Masters thesis, UTeM.

Perumal, Puvanasvaran (2013) Engineer in Society - Module 10. Other. Penerbit UTeM, UTeM.

Perumal, Puvanasvaran (2013) Industrial Engineering. Other. Penerbit UTeM, UTeM.

Perumal, Puvanasvaran (2013) Organizational Vertical & Virtual Integration Model in Implementing Lean Manufacturing Transformation. Journal of Technology Management and Entrepreneurship, 1 (1). pp. 85-99. ISSN 1675-8404

Perumal , Puvanasvaran and Hamdan , Megat and Tang Sai, Hong and Muhamad , Mohd Razali and S Hamouda , Abdel Magid (2013) Lean process management implementation through enhanced problem solving capabilities. Journal of Industrial Engineering and Management, 3 (3). pp. 1-47. ISSN 2013-0953

Peshwinder Singh, Harjit Singh (2013) Acoustic Performance Of Sandwich Skin For Acoustic Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phang, Yuen Jun (2013) Action Mobile Game : Black & White. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phoo, Kho Shin (2013) Design A Compact Tri-Polarized Antenna For MIMO System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phua, Ging Sheng and Tay, Choo Chuan and Ibrahim, Zulkifilie (2013) Library of Distributed Computing using Object Oriented Language. In: 3rd International Conference on Emerging Trends in Computer and Image Processing (ICETCIP'2013) , 8-9 January 2013 , Kuala Lumpur (Malaysia).

Phung, Lee Mun (2013) Combine Infrared Lock-In Thermography And Curve Tracer Into An Integrated System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pokaad, Alif Zulfakar and Khisbullah , Hudha and Md Radzai , Said (2013) Usage of Magnetorheological Damper in Active Front Bumper System for Frontal Impact Protection. Applied Mechanics and Materials, 315. pp. 40-44. ISSN 1662-7482

Pratiwi, Lustiana and Choo, Yun Huoy and Muda, Azah Kamilah and Muda, Noor Azilah (2013) Immune Ant Swarm Optimization for Optimum Rough Reducts Generation. International Journal of Hybrid Intelligent Systems, 10 (3). pp. 93-105. ISSN 1875-8819

Puteri Noor Mastura, Megat Mohd Noor (2013) An Analysis Of Dielectric Constants Of Pharmaceutical Medicines Using Microwave Radiation Exposure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Putra, Azma (2013) The Effect of Uncertainty in the Excitattion on the Vibration Input Power to a Structure. Advance in Acoustics and Vibration, 2013. pp. 1-18. ISSN 1687-627X

Putra, Azma and Ismail, Ahmad Yusuf and ramlan, roszaidi and Ayob, Md Razali and Sajidin, Muhammad (2013) Normal incidence of sound transmission loss of a double-leaf partition inserted with a micro-perforated panel. Advance in Acoustics and Vibration. pp. 1-24. ISSN 1687-627X

Putra, Azma (2013) Fabricating Process and Mechanical Properties of Elastomeric Mount. In: The 7th South East Asia Technical University Consortium (SEATUC) Symposium , March, 4-6 2013, Bandung, Indonesia.

Putra, Azma (2013) Utilizing Sugarcane Wasted Fibers As A Sustainable Acoustic Absorber. Procedia Engineering, 53. pp. 632-638. ISSN 1877-7058

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Farid, W.M and Ayob, Md Razali (2013) INVESTIGATION ON SOUND ABSORPTION COEFFICIENT OF NATURAL PADDY FIBERS. International Journal of Renewable Energy Resources, Vol. 3. pp. 8-11. ISSN 2289-1846

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Mohamad, W. M. F. W. and Salleh, Norliana (2013) Biomass from Paddy Waste Fibers as Sustainable Acoustic Material. Advances in Acoustics and Vibration, Vol. 2. pp. 1-7. ISSN 1687-627X

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Mohamad, Wan Mohd Wan Farid and Salleh, Nor Liana (2013) Biomass from paddy waste fibers as sustainable acoustic material. Advances in Acoustics and Vibration. pp. 1-15. ISSN 1687-627X (In Press)

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2013) SOUND TRANSMISSION LOSS OF A DOUBLE-LEAF PARTITION WITH MICRO-PERFORATED PLATE INSERTION UNDER DIFFUSE FIELD INCIDENCE. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (Januar). pp. 1086-1095. ISSN ISSN: 2180-1606

Putra, Azma and Kassim, Dayang H. and YAAKOB, MOHD YUHAZRI and Abdullah, Y and Muhammad, Nor S. and Jenal, Rustamreen and Nor, Mohd Jailani M. (2013) ASSESSMENT OF THE ACOUSTICAL PERFORMANCE IN MALACCA MOSQUE,MALAYSIA: A CASE STUDY ON THE SAYYIDINA ABU BAKAR MOSQUE. Proceedings of the 20th International Congress on Sound & Vibration. pp. 1-8. ISSN 2329-3675

Putra, Azma and Kassim, Dayang H. and Yakoob, Mohd. d and Nor, M. J. M (2013) Study on the Use of Micro-Perforated Panel to Improve Acoustic Performance in Mosque. Applied Mechanics and Materials, 393. pp. 971-975. ISSN 1660-9336

Putra, Azma and Muhammad, Noryani and Shyafina, Nurain and Thompson, David J. (2013) RADIATION EFFICIENCY OF A PERFORATED PANEL MODELLED USING ELEMENTARY SOURCE TECHNIQUE. Proceedings of the 20th International Congress on Sound & Vibration. pp. 1-8. ISSN 2329-3675

Putra, Azma and Saari, N. F and Bakri, Hairul and Ramlan, Roszaidi and Dan, R. M (2013) Characterisation of Structure-Borne Sound Source Using Reception Plate Method. The Scientific World Journal, Vol. 2. pp. 1-9. ISSN 1537-744X (Online)

Putra, Azma and Susilo, Sidik (2013) Modeling of Dynamic Response of Beam-Type Vibration Absorbing System Excited by a Moving Mass. International Review of Mechanical Engineering. pp. 813-820. ISSN 1970-8734

Q

Qurratu Ain, Iman (2013) The Perception Process Of CIMB Islamic DALI Equity Growth Fund : From Sensation To Investment Risk Acceptance. Project Report. UTeM, Melaka. (Submitted)

R

RAJA ABDULLAH, RAJA IZAMSHAH and YAAKOB, MOHD YUHAZRI and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and SUBRAMONIAN, SIVARAO (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials , 315 (2013). pp. 773-777. ISSN 1662-7482

RIDHWAN, JUMAIDIN and Rafidah , Hasan and Zulfattah, Z. (2013) EFFECT OF AGING ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF C102 COPPER ALLOY. Journal of Engineering and Technology, 4 (2). pp. 115-124. ISSN 2180-3811

Radi Husin, Ramlee (2013) FPGA-Based Gps Tracking And Processing System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Radin Puteri Hazimah, Radin Monawir (2013) Development of vision inspection system for automotive assembled part. Project Report. UTeM, Melaka. (Submitted)

Rafika, Buang (2013) A Critical Evaluation Of The Probable Causes Of Musculoskeletal Disorders Among Workers In Aerospace Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahfizan , Khairuzzaman (2013) An investigation on the influence of double heat treatment process on mild steel plate. Project Report. UTeM. (Submitted)

Rahiman Salmi , Rosdi (2013) Study Of Energy Regenerative Suspension System For Vehicle. Project Report. UTeM, Melaka. (Submitted)

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Aparow, Vimal Rau and Tamaldin, Noreffendy (2013) Modelling and Torque Tracking Control of Permanent Magnet Synchronous Motor For Hybrid Electric Vehicles. International Journal of Automotive and Mechanical Engineering , 7. pp. 955-967. ISSN 2229-8649 (Print); 2180-1606 (Online)

Raihana Syahirah Abdullah, RS Abdullah and Mohd Faizal Abdollah, Faizal M.A. and Zul Azri Muhamad Noh, ZAM Noh (2013) Analysis and Improvement Design on P2P Botnets Detection Framework. International Review on Computers and Software (IRECOS) . pp. 2859-2867. ISSN 1828-6003

Raihana Syahirah Abdullah, Raihana S.A. and Faizal M.A., Faizal M.A. and Zul Azri Muhamad Noh, ZAM Noh (2013) New Discovery of P2P Botnets Attack Pattern within Host-and-Network Atmosphere. International Review on Computers and Software (I.RE.CO.S.). pp. 2663-2670. ISSN 18286003

Raja Abdullah, Raja Izamshah and Yuhazri, Yaakob and Mohd , Hadzley and Mohd , amran and Sivarao, Subramonian (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials, 315. pp. 773-777. ISSN 1660-9336

Raja Ikram, Raja Rina and Abd Ghani, M. K. and Basari, A.S.H (2013) Novel Computerised Halal Pharmaceuticals Supply Chain Framework: A Quality and Production Case Study. In: 2013 IEEE Symposium on Business, Engineering and Industrial Applications, 22 - 25 September 2013., Hotel Pullman, Kuching, Sarawak.

Raja Ikram, Raja Rina and Abd Ghani, M. K. and Basari, A.S.H (2013) Novel Computerized Halal Pharmaceuticals Supply Chain Framework for Warehouse and Procurement. International Journal of Computer Applications . pp. 22-27. ISSN 0975-8887

Raja Ikram, Raja Rina and Mohd Khanapi, Abd Ghani and Abd Samad, Hasan Basari (2013) Novel Computerized Halal Pharmaceuticals Supply Chain Framework for Warehouse and Procurement. IJCA, 70 (10). pp. 23-27. ISSN 0975 – 8887

Raja Rina, Raja Ikram (2013) Halal Computerised Systems Framework For The Halal Pharmaceuticals. Masters thesis, Universiti Teknikal Malaysia Melaka.

Raja Yunus , Raja Nor Azrin and Jidin , Auzani and Alias, Nor Faezah and Lukar Herlino, Adeline and Manap, Mustafa (2013) Performance Analysis of Direct Torque Control of Induction Machines. In: 2013 International Conference on Electrical Machines and Systems (ICEMS) - IEEE, 26-29 October 2013, Busan, Korea.

Rajiani, Ismi (2013) Leadership Practices and Talent Turnover: Study on Yemeni Organizations. Business and Management Research, 2 (3). pp. 60-67. ISSN 1927-6001

Rajiani, Ismi and Edna, Buyong (2013) Repositioning Strategy for Malaysian Companies Internationalization. THE SOUTH EAST ASIAN JOURNAL OF MANAGEMENT, 7 (1). pp. 1-15. ISSN 1978-1989

Rajiani, Ismi (2013) Promoting Organizational Citizenship Behavior among Employees -The Role of Leadership Practices. International Journal of Business and Management;, 8 (6). pp. 47-54. ISSN 1833-3850

Rajiani, Ismi and Buyong, Edna (2013) Loyalty and Neglect as Responses To Dissatisfying Job Conditions (The Role of Personality). Journal of Administrative Science, 10 (1). pp. 20-30. ISSN 1675-1302

Ramani, Anis Niza and Gainus, Farlister Glenn and Sardi, Junainah and Mohd Nasir, Mohamad Na'im (2013) Feasibility Study in Implementation of Microgrid by using Fuel Cells. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET), 3 - 4 December 2013, Kuantan.

Ramani, Anis Niza and Gan, Chin Kim and Sapar, Ahmad Farid and Shamshiri, Meysam (2013) Performance Assessment of Slip Mode Frequency Shift (SMS) Islanding Detection Methods. In: International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2013), 30 - 31 Oct 2013, UTeM.

Ramlee, Ridza Azri and LEONG , MAN HONG and SARBAN SINGH , RANJIT SINGH A/L and ISMAIL, MOHD MUZAFAR and OTHMAN , MOHD AZLISHAH and SULAIMAN , HAMZAH ASYRANI and MISRAN , MOHAMAD HARRIS and MEOR SAID , MAIZATUL ALICE (2013) Bluetooth Remote Home Automation System Using Android Application. In: The International Journal of Engineering And Science (IJES), 1 JAN 2013, INDIA.

Rasida, Abu Bakar (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Januari Hingga Disember 2012. Perpustakaan UTeM. (Unpublished)

Razali, Sazalinsyah and Shamsudin, Nurul Fathiyah and Osman, Mashanum and Meng, Qinggang and Yang, Shuang-Hua (2013) Flock Identification using Connected Components Labeling for Multi-Robot Shepherding. In: 5th International Conference of Soft Computing and Pattern Recognition (SoCPaR 2013), 15-18 Dec 2013, Hanoi, Vietnam.

Razali, Sharifah Nadiyah and Shahbodin, Faaizah and Bakar, Norasiken and Hussin, Hanipah and Ahmad, Mohd Hafiez and Sulaiman, Normala (2013) Incorporating Learning Management System with Social Network Sites to Support Online Collaborative Learning: Preliminary Analysis. In: Advances in Visual Informatics. Lecture Notes in Computer Science, 8237 . Springer, pp. 549-557. ISBN 978-3-319-02957-3

Revinnath, Tengga Daram (2013) Islanding detection using passive reactive power imbalance method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridhwan, J. and Selamat , M.Z. and Zulfattah, Z. (2013) Effect of Cooling Rate on The Microstructures And Hardness Of Fe-Ni-Cr Superalloy. Journal of Mechanical Engineering and Technology, 5 (1). pp. 45-57. ISSN 2180 – 1053

Ridhwan, J. and Zulfattah, Z. and Selamat, Mohd Zulkefli and Hafidzal, M.H.M (2013) EFFECT OF AGING TREATMENT ON THE MICROSTRUCTURES AND HARDNESS OF Fe-Ni-Cr SUPERALLOY. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1430-1411. ISSN 2180-1606

Rina Fakhira , Zamri (2013) Design and development of RFID elevator. Project Report. UTeM. (Submitted)

Rizaini, Ramli (2013) Entertainment Subsystem For Pin-It Social Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Robani, Anidah and Dora, Mohd Taib and Syed Hassan, Syed Najmuddin and Hussin, Hanipah and Husain, Kalthom and Md Saad, Mohd Shamsuri and Zainudin, Mohamad Zahir and Mohin, Mohaida and Mohd Idris, Mohd Fadzil (2013) HKICEPS-3678 Exploring the Motivation for and Barriers to Academic Leadership among Malaysian Polytechnic Lecturers of FELDA Settlement Background. In: Hong Kong International Conference on Education, Psychology and Society, December 2013, Hong Kong. (Unpublished)

Roha Mini, Abdul Hazis (2013) Development Of Solar Watering Pump Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaya, Dali (2013) Design And Analysis Of Casted LM6 - Tic In Designing Of Production Tooling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Romli, Ikhsan (2013) An assessment on the effect of different characteristics of symmetric matrices to primal and dual solutions in linear programming. Masters thesis, UTeM.

Rosfadzlin Hanna, Zainal Alam (2013) Design And Analysis Of Wood Laser Cutting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslina, Mohd Nor (2013) Improvement Of Quality Process Control Of Airbus A320 Spoiler Programmed In Composite Technology Research Malaysia Sdn Bhd (CTRM): Process Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozaina, Kasim (2013) Development Heart Rate Monitoring System Using Zigbee. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rudy , Majid (2013) The Effect Of Applied Stress On Heat Treated Aluminum Alloys 7075 In DC Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

S. G. Herawan, and M. S. Hadi, and Md. R. Ayob, and Putra, Azma (2013) Characterization of Activated Carbons from Oil-Palm Shell by CO2 Activation with No Holding Carbonization Temperature. The Scientific World journal, 2013. pp. 1-6. ISSN 1537-744X

S.A, Fadhilah and I., Hidayah and M.Z, Hilwa and H.N , Faizah and R.S, Marhamah (2013) Thermophysical properties of Copper/Water nanofluid for automotive cooling system – Mathematical modeling. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (2). pp. 1-10. ISSN 2180-1053 (Submitted)

SAID, MD RADZAI and Tan, CheeFai (2013) Contaminants on Electrical Contacts Used in Semiconductor Device Testing. World Applied Sciences Journal. pp. 1352-1354. ISSN 1818-4952

SARKAWI, HAFEZ and Jali, Mohd Hafiz (2013) An Implementation Of Full-State Observer And Controller For Dynamic State-Space Model Of Zeta Converter. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia. (Unpublished)

Saadun, Mohd Noor Asril and Abdul Manaf, Muhammad Zaidan and Zakaria, Mohamad Shukri and Mohd Hanafi, Mohd Hafdizal (2013) The effect of different aspect ratio and bottom heat flux towards contaminant removal using numerical analysis. IOP Conf.Series:Materials Scienceand Engineering, 50. pp. 1-10. ISSN 1757-8981

Saadun, Mohd Noor Asril and Mokhtar, Nur Hazwani and Zakaria, Mohamad Shukri and Abdul Manaf, Muhammad Zaidan and Mohd Hanafi, Mohd Hafidzal (2013) Numerical Analysis on the Effects of Cavity Geometry with Heat towards Contaminant Removal. Applied Mechanics and Materials, 393. pp. 851-856. ISSN 1662-7482

Saaya, Zurina and Schaal, Markus and Rafter, Rachael and Smyth, Barry (2013) Recommending Topics for Web Curation. In: User Modeling, Adaptation, and Personalization, 10-14 june 2014, Rome, Italy.

Safarwani, Jaafar and Jali, Mohd Hafiz and Fauzal Naim, Zohedi (2013) State-Feedback Controller Based on Pole Placement Technique for Inverted Pendulum System. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

Safei, Su'aidi (2013) Bridging the World Through Higher Education. In: Malaysia Day, 9 April 2013, University Ifrane, Morocco. (Unpublished)

Safei, Su'aidi (2013) Contemporary Modern Vision of Malaysia. In: Rukyah Li-Maliziya al-Asriyya (Arabic). Ruz el-Yosouf, pp. 133-185.

Safei, Su'aidi (2013) - Visit of Minister of Higher Education & Delegate to Egypt 2013 -To Energize the Educational Relationship Between Malaysia and Egypt. In: Misr Fi Khatiriy (Arabic). Dar el-Gumhouriyya, Cairo, Egypt, pp. 89-113.

Safiah , Sidek and Shahrulanuar , Mohamed and Norliah, Kudus and Mahadi, Abu Hassan and Sazelin, Arif and Noor Azlin, Bidin and Mohd Taib, Dora and Mohd Fadzil , Mohd Idris (2013) Academic Career In Malaysian Higher Education: The Identities Of Malaysian Professors. PROSIDING ICBM 2013, NONE. pp. 1-16. ISSN -

Safwan Shamil, Azhar (2013) Wireless Power Usage Monitor Based On Android Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sahbudin Shaari (2013) Asymmetrical Parallel Cascaded Microring Resonator (APCMRR) Filter on Silicon-On-Insulator (SOI) for WDM Network. UKM3.2.29/108/2/742.

Said, Md Radzai and Hasan, Nor Halim and Leman, A.M. and Abd Rahman, Majahar (2013) Baseline Inspection and Measurement of Local Exhaust Ventilation (LEV) Systems at Spray Booth in Manufacturing Plant. The Journal of Selcuk University Natural and Applied Science, ICOEST (Specia). pp. 637-647. ISSN 2147-3781

Saidah, Mohamad Aminallah (2013) Characterization Of Hydroxyapatite Coating Deposited On Glass, Stainless Steel And Titanium Alloy Substrate Via Sol-Gel Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saipullah, Khairul Muzzammil (2013) Comparison of Feature Extractors for Real-Time Object Detection on Android Smartphone. Journal of Theoretical and Applied Information Technology . pp. 135-142. ISSN 1992-8645

Saipullah, Khairul Muzzammil (2013) Feature Extraction Method for Classification of Approved Halal Logo in Malaysia using Fractionalized Principle Magnitude. Engineering Management Reviews (EMR), 2 (2). 36 -44 . ISSN 2326-5884

Saipullah, Khairul Muzzammil (2013) Measuring Power Consumption for Image Processing on Android Smartphone. American Journal of Applied Sciences, 9 (12). 2052 -2057 . ISSN 1546-9239

Sakthivelu, Vasanthan and Chong, Shin Horng (2013) Motion control of pneumatic muscle actuator: experimental setup and modeling. In: IEEE Student Conference on Research and Development (SCOReD) 2013, December 16-17, 2013, Palm Garden Hotel, Putrajaya, Malaysia.

Saleman, Abdul Rafeq and Zulfattah, Z. M. and Najib, M. Ali and Rody, M. Z. M and Fadhli, Syahrial and Abdollah, Mohd Fadzli bin and Hanafi, M.H.M (2013) Preliminary Study of CST in Malaysia based on Field Optical Efficiency. Procedia Engineering , 68. pp. 238-244. ISSN 1877-7058

Salim, Mohd Azli and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Jusoff, Kamarulzaman and Md Zin, Mohd Zarhamdy (2013) Modeling, Simulation and Verification of Parameters Study on Flexible Automotive Wiper. Advanced Science Letters, 19 (1). pp. 106-112. ISSN 1936-6612

Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Tee, Boon Tuan (2013) Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method. Advanced Science Letters, 19 (1). pp. 142-146. ISSN 1936-6612

Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Thompson, David and Ahmad, Nazirah (2013) Transmissibility of a Laminated Rubber-Metal Spring: A Preliminary Study. Applied Mechanics and Materials. pp. 661-666. ISSN 1660-9336

Salim, Mohd Azli and Putra, Azma and David J., Thompson and Ahmad, Nazirah and Abdullah, Mohd Azman (2013) TRANSMISSIBILITY OF A LAMINATED RUBBER-METAL SPRING A PRELIMINARY STUDY. Applied Mechanics and Materials, 393. pp. 661-665. ISSN 1660-9336

Salim, Norhafiz (2013) Optimal Location of UPFC with ATC Calculation. Optimal Location of UPFC with ATC Calculation, (Volum. pp. 896-900. ISSN 313-314.896

Salleh, Azahari and Abd Aziz, Mohamad Zoinol Abidin and Misran, Mohamad Harris and Othman, Mohd Azlishah and Mohamad, Najmiah Radiah (2013) Design of Wideband Low Noise Amplifier using Negative Feedback Topology for Motorola Application. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 5 (1). pp. 47-52. ISSN 2180-1843

Salleh, Azahari and Salahuddin, Lizawati and Mohamad, Najmiah Radiah and Abd Aziz, Mohamad Zoinol Abidin (2013) Design of Low Cost Greenhouse Monitoring using ZigBee Technology. International Journal of Electronics Communication and Computer Technology (IJECCT), 3 (5). pp. 472-475. ISSN 2249-7838

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser and Alhawari, Khalid Salim (2013) Thermodynamic simulation on thixoformability of aluminium alloys for semi-solid metal processing. International Journal of Mathematics and Computers in Simulation, 7 (3). pp. 286-293. ISSN 1998-0159

Salleh, Azahari and Abd Aziz, M. Z. A and Mohamad, Najmiah Radiah and Hashim, Nik Mohd Zarifie and Ja'afar, Abd Shukur (2013) Simulation of Wideband Power Amplifier Design for Software Defined Radio (SDR) Using Feedback and Balanced Topology. In: The 15th International Conference on Advanced Communications Technology-ICACT2013, 27-28 DISEMBER 2013, JEJU ISLAND KOREA.

Salleh, Azahari and Abd Aziz, Mohamad Zoinol Abidin and Misran, Mohamad Harris and Mohamad, Najmiah Radiah (2013) Design of Low Power Wideband Low Noise Amplifier for Software Defined Radio at 100 MHz to 1 GHz. Procedia Engineering , 53. pp. 368-375. ISSN 1877-7058

Salleh, Azahari and Abd Aziz, Mohamad Zoinol Abidin and Misran, Mohamad Harris and Mohamad, Najmiah Radiah (2013) Development of Greenhouse Monitoring using Wireless Sensor Network through ZigBee Technology. International Journal of Engineering Science Invention (IJESI), 2 (7). pp. 6-12. ISSN 2319 – 6734

Salleh, Azahari and Abd Aziz, Mohamad Zoinol Abidin and Misran, Mohamad Harris and Mohamad, Najmiah Radiah and Zakaria, Zahriladha (2013) Design of Low Noise Amplifier for Radio over Fiber at 5.2 GHz. IOSR Journal of Electronics and Communication Engineering (IOSR-JECE), Volume (Issue ). pp. 65-69. ISSN 2278-8735

Salleh, Azahari and Ali, Nur Alisa and Shairi , N. A and Mohamed Aminuddin, Mai Mariam and Mohamad, Najmiah Radiah and Ja'afar, Abd Shukur and Abd Rahim, Rosman and Mustaffa, Izadora and Mohammed Napiah, Zul Atfyi Fauzan and Zainuddin, Muhammad Noorazlan Shah (2013) UWB Antenna Width Tuning Effect for UWB Communication. Australian Journal of Basic and Applied Sciences, 7 (11). pp. 15-20. ISSN 1991-8178

Salleh, Azahari and Mohamad, Najmiah Radiah and Misran, Mohamad Harris and Abd Aziz, Mohamad Zoinol Abidin and Hashim, Nik Mohd Zarifie (2013) Simulation of 2.4 GHz Low Power RF Front End Design for Radio over Fiber Technology. International Journal of Emerging Trends in Engineering and Development, 5 (3). pp. 345-354. ISSN 2249-6149

Salleh, Azahari and Mohamad, Najmiah Radiah and Misran, Mohamad Harris and Hashim, Nik Mohd Zarifie and othman, mohd azlishah and Abd Aziz, Mohamad Zoinol Abidin (2013) Design the High Gain and Low Power Amplifier for Radio over Fiber Technology at 2.4 GHz. American Journal of Engineering Research (AJER), 2 (9). pp. 163-170. ISSN 2320-0847

Salleh, Azahari and Mohamad, Najmiah Radiah and Othman, Mohd Azlishah and Abd Aziz, Mohamad Zoinol Abidin and Hashim, Nik Mohd Zarifie and Misran, Mohamad Harris (2013) Simulation of WiMAX System Based on OFDM Model with Difference Adaptive Modulation Techniques. International Journal of Computer Science and Mobile Computing, 2 (9). pp. 178-183. ISSN 2320–088X

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser (2013) An overview of semisolid processing of aluminium alloys. ISRN Materials Sciences. pp. 1-9. ISSN 2356-7872

Sam, Chee Xin (2013) Implementation Of Photorealistic Augmented Reality Technique On Android Platform In Color Learning Process For Toddlers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samat, Khairul Fadzli and Hussein, Mohamed and M.R., Safizadeh (2013) Analysis of Single Actuator for Rehabilitation Device of Leg Weakness. Applied Mechanics and Materials. pp. 1021-1025. ISSN 1660-9336

Sanusi, Syamim and Ibrahim, Zulkifli and Jidin , Auzani and JOPRI, MOHD HATTA and Abdul Karim, Kasrul and Othman, Md Nazri (2013) Implementation of Space Vector Modulation for Voltage Source Inverter. In: 2013 IEEE-International Conference on Electrical Machines and Systems (ICEMS), 26-29 October 2013, Busan, Korea.

Saptari, Adi and Poh Kiat, Ng (2013) Applying Clockwise and Counterclockwise Torque Directions in Pinch Grips: A Descriptive Study. In: 4th International Conference on Mechanical and Manufacturing Engineering 2013, Dec 17, 2013 - Dec 19, 2013, Equatorial Hotel, Bangi- Putrajaya.

Sarban Singh, Ranjit Singh and Sim, Sau Seong and Anas, Siti Aisyah and Subramaniam, Siva Kumar (2013) Concept Of Increasing Energy Storage Capacity Using Two Energy Banks Via Integrating A Bidirectional Switching System. International Journal of Enhanced Research in Science Technology & Engineering, 2 (3). pp. 1-4. ISSN 2319-7463

Sarkawi, Hafez and Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi (2013) DYNAMIC MODEL OF ZETA CONVERTER WITH FULL-STATE FEEDBACK CONTROLLER IMPLEMENTATION. International Journal of Research in Engineering and Technology (IJRET), 02 (08). pp. 34-43. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Sasitharan , Yellapan (2013) Development Of Brake System For Reduced Scale Vehicle. Project Report. UTeM, Melaka. (Submitted)

Sazelin, Arif and Safiah, Sidek and Norain, Ismail and Norun Najjah, Ahmat (2013) Kebolehlaksanaan Sistem Jaminan Halal Di Kalangan Pengusaha Restoran Di Malaysia: Isu Dan Cabaran. In: THE 5TH ISLAMIC ECONOMIC SYSTEM CONFERENCE, 4-5 SEPTEMBER 2013, BERJAYA TIMES SQUARE HOTEL KUALA LUMPUR.

Sean , John Mathew (2013) Modeling And Optimization The Effects Of Process Variables On Mechanical Properties Of AL-6061 T6 Robotic CO2 Weldments. Project Report. UTeM, Melaka. (Submitted)

Selamat, Mohd Zulkefli and Ahmad, Mohd Shakir and Mohd Daud, Mohd Ahadlin and Jusoff, Kamaruzaman (2013) The Hybrid Conductive Filler in the Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells. The Hybrid Conductive Filler in the Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells, 7 (3). pp. 72-77. ISSN ISSN 1991-8178

Selamat, S. R. and Sahib, S. and Hassan, N. H. and Yusof, R. and Abdollah, M. F. (2013) Forensic Traceability Index in Digital Forensic Investigation. Journal of Information Security. pp. 19-32. ISSN 2153-1234

Selamat, Mohd Zulkefli and Ahmad, Mohd Sakir and Mohd Daud, Mohd Ahadlin and Ahmad, Narisa (2013) Effect of Carbon Nanotubes on Properties of Graphite/Carbon Black/Polypropylene Nanocomposites. Advanced Materials Research, 795 (2013). pp. 29-34. ISSN 10.4028/www.scientific.net/AMR.795.29

Selamat, Nur Asmiza (2013) Particle Swarm Optimization for Multivariable PID Controller Tuning. In: 2013 IEEE 9th International Colloquium on Signal Processing and its Applications, 8-10 March 2013 , Kuala Lumpur, Malaysia.

Seri Rahayu , Kamat and Fatihah Ros, Ahmad (2013) A relationship between road conditions, physical and psychophysical experience among occupational drivers. Advanced Engineering Forum, 10 (2013) (1). pp. 345-350. ISSN 103.26.74.254-27/05/14,09:27:37

Seri Rahayu , Kamat and Norhidayah, Hashim (2013) A study on muscle fatigue associated with awkward posture among workers in aerospace industry. Advanced Engineering Forum, 10 (1). pp. 287-292. ISSN 103.26.74.254-27/05/14,09:25:29

Shaaban, Azizah and Se, Sian Meng and Mohd Fairuz, Dimin and Hamid, Nadiah (2013) SLOW PYROLYSIS AND CHARACTERIZATION OF SURFACE FUNCTIONAL GROUPS FOR BIOCHAR DERIVED FROM RUBBER WOOD SAWDUST. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-4 July 2013, Kuantan, Pahang, Malaysia.

Shaaban, Azizah and Sian Meng, Se and Merpati Mitan, Nona Mery and Dimin, Mohd Fairuz (2013) Characterization of biochar derived from rubber wood sawdust through slow pyrolysis on surface porosities and functional groups. In: The Malaysian International Tribology Conference 2013, MITC2013, 18-20 November 2013, Kota Kinabalu, Sabah.. (Submitted)

Shafiyah , Abd. Rashid (2013) Design And Development Of Corn Planting Tool : A Semi Automatictugal. Project Report. UTeM, Melaka. (Submitted)

Shahbodin, F. and rosli, zareena and mei sui, linda khoo (2013) Hybrid Problem Based Learning Games for Effective Mathematics Learning. Australian Journal of Basic and Applied Sciences. pp. 5-9. ISSN 1991-8178

Shahirah, Saadon (2013) Wideband Optical Amplifier Using High Concentration Erbium Doped Fiber In Single-Pass Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahirah , Md Emran (2013) Smart detector database using RFID. Project Report. UTeM. (Submitted)

Shaidatul Nurmayanti, Ya'acob (2013) Analyzing The Anserverbot Android Malware Behavior Through Static. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaiful Adli, Yaakob (2013) Automatic Speaker Recognition System For Forensic Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamshiri, Meysam and Gan, Chin Kim and Mariana, Yusoff and Ab Ghani, Mohd Ruddin (2013) Using Particle Swarm Optimization Algorithm in the Distribution System Planning. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 85-92. ISSN 1991-8178

Shamsudin, Shamsul Anuar (2013) KINEMATIC SYNTHESIS OF PLANAR, SHAPE-CHANGING RIGID BODY MECHANISMS FOR DESIGN PROFILES WITH SIGNIFICANT DIFFERENCES IN ARC LENGTH. PhD thesis, The University of Dayton.

Shamsudin, Shamsul Anuar (2013) A CLOSED-FORM SOLUTION FOR THE SIMILARITY TRANSFORMATION PARAMETERS OF TWO PLANAR POINT SETS. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (1). pp. 59-68. ISSN 2180-1053

Shamsudin, Shamsul Anuar and Murray, Andrew P. and Myszka, David H. and Schmiedeler, James P. (2013) Kinematic synthesis of planar, shape-changing, rigid body mechanisms for design profiles with significant differences in arc length. Mechanism and Machine Theory, 70 (Decemb). pp. 425-440. ISSN 0094-114X

Shamsul Fakhar, Abd Gani (2013) Development Of Stereo Vision Sensor And Distance Estimation For Computer Vision Application (DE-CV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharifah, Rashidah (2013) Compact Microstrip Array Antenna Using Electromagnetic Band Gap (EBG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharifah Nadiyah, Razali and Faaizah , Shahbodin and Norasiken, Bakar and Hanipah, Hussin and Mohd. Hafiez, Ahmad and Normala, Sulaiman (2013) Incorporating Learning Management System with Social Network Sites to Support Online Collaborative Learning: Preliminary Analysis. Lecturer Notes in Computer Science . pp. 549-557. ISSN LNCS 8327

Sharifah Nadiyah, Razali and Faaizah , Shahbodin and Norasiken , Bakar and Hanipah , Hussin and Mohd Hafiez, Ahmad (2013) The Need Of Incorporating CIDOS With Facebook To Facilitate Online Collaborative Learning. WIT Transactions on Information and Communication Technologies. pp. 1-10. ISSN 1743-3517

Sharifah Zafirah, Syed Zainal Abidin (2013) Transparent Conductive Carbon Nanotubes / Binder Hybrid Thin Film. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharon, Boon Khai Yen (2013) FMNA System (Forget Me Not Alert System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shazailaana , Samsuddin (2013) Logistics And Supply Chain Management In The Hotel Industry : Impact On Hotel Performance At Naza Talyya Hotel, Melaka. Project Report. UTeM, Melaka. (Submitted)

Shazizi, Mustafa (2013) User Interface Assessment Of Car Dashboards. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shazreen , Mohd Asrap Khan (2013) Know your course android application. Project Report. UTeM. (Submitted)

Shazreena , Samat (2013) Effect of heat treatment on the microstructure and mechanical properties of low carbon steel. Project Report. UTeM, Melaka. (Submitted)

Sia, Jia Ling (2013) Industrial Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sidek, Safiah (2013) A review on tool supports for security requirements engineering. 2013 IEEE Conference on Open Systems (ICOS). 190 -194. ISSN 978-1-4799-3152-1

Sim, Sau Seong (2013) Smart Switching Charging System For Solar Energy Storage Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sin, Chu Woon (2013) Design And Development Of Thermal Food Container. Project Report. UTeM, Melaka. (Submitted)

Sirinjeev Rao, Raman (2013) Design Of Casting Mold For Natural Fiber – Metal Matrix Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aishah, Rosli (2013) Design A Bow-Tie Patch Antenna With Complementary Split Ring Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aisyah, Safuan (2013) Thermal Absorption Properties Of Spent Tea Leaf Filled Polyurethane Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Fatimah, Sulaiman and Hazli Rafis, Abdul Rahim and Siti Halma, Johari and Khairuddin , Osman and Amar Faiz, Zainal Abidin and Mohd Fua'ad , Rahmat (2013) Optimizing the Process Parameters of GMV Controller by PSO Tuning Method. Australian Journal of Basic and Applied Sciences. pp. 44-50. ISSN 1991-8178

Siti Hajar, Mohamad and Norfaridatul Akmaliah, Othman and Izaidin, Abdul Majid and Juhaini, Jabar and Mastura, Roni (2013) Customer relationship management (CRM): The impact on SMEs performance. In: 4th Social, Development and Environmental Studies International Conference 2013; Faculty of Social Science and Humanities, 19 March 2013, Universiti Kebangsaan Malaysia, Bangi, Selangor, Malaysia.

Siti Hajar , Abdul Rahman (2013) Quality environment 5S enhance service performance: a case study in Malacca State Government. Masters thesis, UTeM.

Siti Khadijah, Bharum (2013) Design And Analysis Of Resin Transfer Mould For Composite Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nadhirahwati , Azis (2013) The Effectiveness Of Hybrid Electrical System Usage Level Among Resident On Kapas Island. Project Report. UTeM, Melaka. (Submitted)

Siti Nadiah, Salim (2013) GSM Based Display Toolkit : Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Naziatul Umirah , Hasnol (2013) A Study On Stress Level And Its Implication On Productivity Among Women Engineers In Organizations. Project Report. UTeM, Melaka. (Submitted)

Siti Nooraishah , Elies (2013) Preliminary Investigation Of Plastics Joining Process. Project Report. UTeM, Melaka. (Submitted)

Siti Norashikin, Zolkaflee (2013) Optimization Of Cutter Path For Machining Complex 3D Surface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Norasidah , Md Yunos (2013) The Effectiveness In E-learning Portal (Ulearn) At Universiti Teknikal Malaysia Melaka (UTeM). Project Report. UTeM, Melaka. (Submitted)

Siti Noridayu, Samad (2013) A Study Of Value Stream Mapping (VSM) In HPF Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Adibah, Ithnin (2013) A Study Of Safety And Health Awareness And Noise Assessment At Stamping Die Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Atikah, Sheikh Abdul Hadi (2013) Investigating Android Malware (Droidkungfu 4) Behavior Through Static Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nurain, Ab Aziz (2013) Investigation of knowledge sharing and behavioral intentions among public sector employees in Malaysia. Masters thesis, UTeM.

Siti Nurfarah Azreen , Mohd Azman (2013) Green Marketing At Melaka : The Consumer Buying Behaviour Towards Green Product. Project Report. UTeM, Melaka. (Submitted)

Siti Nurfatihah, Ab Rasid (2013) Manual Lifting Risk Analysis At Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nursyuhada, Mat Nasir (2013) Modeling Wire Antenna Using 3D Finite Difference-Time Domain (FDTD) Method In Graphical User Interface (GUI) For Radiation Pattern Evaluation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rasyidah, Basiron (2013) The Financing Of Small And Medium Sized Enterprise (SMES) And The Impact To Business Performance In Melaka Food Industry. Project Report. UTeM, Melaka. (Submitted)

Siti Rukaini, Abdullah (2013) Android Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Saharah, Zahari (2013) High Efficiency Power Amplifier Design For Long Term Evolution (LTE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sakinah Munirah, Ishak (2013) A Study Of Sunflower Oil Performance As A Gear Lubricant. Project Report. UTeM, Melaka. (Submitted)

Siti Sarah , Zahari (2013) The heat transfer phenomenon within volumetric receiver of concentrated solar tower using Diamond Like Carbon (DLC) material. Project Report. UTeM, Melaka. (Submitted)

Siti Syahirah, Samsuri (2013) The Effectiveness And Ability Of Quality Tools In Minimizing The Number Of Product Defects In Manufacturing Industries. Project Report. UTeM, Melaka. (Submitted)

Siti Umairah, Abdul Halim (2013) SDS Schizophrenia Detection System Using ID3 Algorithm Implemented For Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Wannorhassliza, Wan Hassan (2013) Characteristics Of Hydroxyapatite Sol-Gel Coating Of Stainless Steel In Hank’s Solution And Sodium Chloride Medium. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Zulaiha Atikah , Mohamad (2013) The implementation of hazard analysis critical control point (HACCP) in small and medium Malaysian food industries context for better business performance. Project Report. UTeM. (Submitted)

Sivakumar, Dhar Malingam (2013) Effect of process parameters during forming of self reinforced – PP based Fiber Metal Laminate. Composite Structures, 97. pp. 332-337. ISSN 0263-8223

Sivanyanam , Subramaniam (2013) Modeling, Prediction And Optimization Of Dilution On Austenitic Stainless Steel (AISI 316L) Surfacing Of Low Carbon Steel (AISI 1020) Using Robotic Arc Welding. Project Report. UTeM, Melaka. (Submitted)

Sivarao, Subramonian and S., Thiru and Jusoff, Kamaruzzaman and Azizah, Shaaban and Mariana, Yusoff and Jano, Zanariah and Yuhazri, Yaakob and HASOLOAN , HAERY IAN PIETER and Abu Bakar, Mohd Hadzley and Raja, Izamshah and Hussein, Nur Izan Syahriah and Mohd Amran, Md Ali and Taufik, , and Wahyono Sapto, Widodo and Tan, CheeFai and Sivakumar, Dhar Malingam (2013) Modelling of CO2 Laser Materials Processing by Networked Neuro-Dimension Fuzzy Intelligent System. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 35-45. ISSN 1991-8178

Sivarao, Subramonian and Samsudin, Abdul Rahim and Tin , Shaw Ling and Anuar , Mohamed Kassim and Taufik, , and Mohd Amran, Md Ali (2013) Programable Automatic Servise Time Reminder (PAST-R) To Overcome Traditional Maintenance Approach. Australian Journal of Basic and Applied Sciences, 7 (11). pp. 206-212. ISSN 1991-8178

Sivarao, Subramonian and Alif, Aziz and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, , and Hambali, A (2013) Finite Element Analysis of Super Energy Saving Locking System Towards Enhancing Door Lock Performance and Security. International Review of Mechanical Engineering, 7 (6). pp. 1147-1151. ISSN 1970-8734

Sivarao, Subramonian and Aziz, Alif and Hambali, A and Salleh, Mohd Rizal and T.J.S, Anand and Raja, Izamshah and Nur, izan and A.R.M, Warikh (2013) SUPER ENERGY SAVING LOCKING SYSTEM (SES- LOCK). In: Program Pemindahan Ilmu (KTP01), 21 Ogos, Bangi Malaysia.

Sivarao, Subramonian and Fairuz, Dimin and Faris, Nik and Hambali, A and Sivakumar, Dhar Malingam and Sapuan, S.M (2013) Analytical Hierarchy Process for Design Selection of Micro Hot-Marking Tool. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 30-31 October 2013, Melaka, Malaysia.

Sivarao, Subramonian and Nantha, kumar and Taufik, , and Sivakumar, Dhar Malingam and Mohd Amri , Sulaiman and Kassim, M.S (2013) Heat Exchanger Analysis to Reduce Hexane Loss in Palm Kernel Oil Extraction Plant. International Journal of Mechanical and Mechatronics Engineering, 13 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and Qumrul, Ahsan and Mohd , amran and Joseph Sahaya Anand, T and Raja Izamshah , Raja Abdullah (2013) Friction Performance Analysis of Waste Tire Rubber Powder Reinforced Polypropylene Using Pin-On-Disk Tribometer. Procedia Engineering . pp. 743-749. ISSN 1877-7058

Sivarao, Subramonian and Qumrul, Ahsan and Mohd Amran, Md Ali and T.J.S, Anand and RAJA ABDULLAH, RAJA IZAMSHAH and Aziz, Alif (2013) Friction Performonce Anolysis of woste Tire Rubber Powder Reinforced polypropylene using pin-on-Disk Tribometer. In: Malaysian International Tribology Conference ( MITC), November 18-20, Kota Kinabalu, Sabah.

Sivarao, Subramonian and Robert, Milkey and Samsudin, Abdul Rahim (2013) RSM Modelling and Optimization of CO2 Laser Machining of Industrial PVC Foam. International Review on Modelling and Simulations, 6 (4). pp. 1339-1343. ISSN 1974-9821

Sivarao, Subramonian and Robert, Milkey and Samsudin, Abdul Rahim (2013) Taguchi Modeling and Optimization of Laser Processing In Machining of Substantial Industrial PVC Foam. International Journal of Applied Engineering Research, 8 (12). pp. 1415-1426. ISSN 0973-4562

Sivarao, Subramonian and S.THIRU,, CHITRAMBALAM and T., Joseph Sahaya Anand and Mariana , Yusof (2013) Establishing a Hybrid Laser Lathing Technology. World Applied Sciences Journal, 21. pp. 53-59. ISSN 1818-4952

Sofia Murni, Paiman (2013) Arduino Coffee Pot Via Twitter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sopna, Balakrishnan (2013) Performance Analysis Of Multihop Transsmission Using ARP Routing Protocol In IEEE 802.11b Ad-Hoc Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Stephanie Mujan , Hamilton (2013) Thermal insulation particle board made from sugarcane bagasse and kenaf fibers reinforced with polythlene. Project Report. UTeM, Melaka. (Submitted)

Sudin, Mohd Nizam (2013) User-Centred Design Approach in Designing Motorcycle Tire Dismounting Tool for One-Handed User. International Journal of Engineering and Technology (IJET), 5 (4). pp. 3588-3595. ISSN 0975-4024

Sudin, Mohd Nizam and Zamani, Safwan (2013) Conceptual Design of a Motorcycle Tire Dismounting Tool for One-Handed User. Journal of Mechanical Engineering and Technology, 5 (1). pp. 1-10. ISSN 2180-1053

Sudin, Mohd. Nizam and Ramli, Faiz Redza and Tan, CheeFai (2013) FUNCTIONAL MODELLING APPROACH IN THE DESIGN OF AN ELECTRICAL SHOE DRYER. Suranaree Journal of Science and Technology, 20 (4). pp. 279-287. ISSN 0858-849X

Suhaimi, Misha (2013) The CFD simulation of tray dryer design for kenaf core drying. Applied Mechanics and Materials. pp. 717-722. ISSN 1660-9336

Suhaimi, Misha (2013) Comparison of CFD Simulation on Tray Dryer System Between Porous and Solid Product. In: Latest Trends in Renewable Energy & Environmental Informatics. WSEAS Press, pp. 59-64. ISBN 978-1-61804-175-3

Suhaimi, Misha (2013) Review on the Application of a Tray Dryer System for Agricultural Products. World Applied Sciences Journal, 22 (3). pp. 424-433. ISSN 1818-4952

Suhaimi, Misha (2013) The Effect of Drying Air Temperature and Humidity on the Drying Kinetics of Kenaf Core. Applied Mechanics and Materials, 315. pp. 710-714. ISSN 1660-9336

Suhaimi , Misha (2013) The Prediction of Drying Uniformity in Tray Dryer System using CFD Simulation. International Journal of Machine Learning and Computing, 3 (5). pp. 419-423. ISSN 2010-3700

Sukarti, Suziee (2013) The effect of seawater on the corrosion behavior of natural gas pipelines in Malaysia. Masters thesis, UTeM.

Sulaima, Mohamad Fani and Jaafar, Hazriq Izzuan (2013) A DNR Using Evolutionary PSO for Power Loss Reduction. Journal of Telecommunication, Electronic and Computer Engineering, 5 (1). pp. 31-36. ISSN 2180-1843

Sulaima, Mohamad Fani and Jali, Mohd Hafiz and Wan Daud, Wan Mohd Bukhari and Mohd Nasir, Mohamad Na'im and Jaafar, Hazriq Izzuan (2013) Power Distribution Network Reconfiguration by Using EPSO for Loss Minimizing. In: International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2013), 30 - 31 Oct 2013, UTeM.

Sulaima, Mohamad Fani and Wan Daud, Wan Mohd Bukhari and Ali, Fara Ashikin and Mohd Nasir, Mohamad Na'im and Yahya, Abu Bakar (2013) Oil and Gas Offshore Pipeline Leak Detection System: A Feasibility Study. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013), 30 - 31 October, 2013, Melaka, Malaysia.

Sulaiman, Hamzah Asyrani and Bade, Abdullah and Abdullah, Mohd Harun (2013) EFFICIENT DISTANCE COMPUTATION ALGORITHM BETWEEN NEARLY INTERSECT OBJECTS USING DYNAMIC PIVOT POINT IN VIRTUAL ENVIRONMENT APPLICATION. In: Simposium Kebangsaan Sains Matematik ke-21, 6 - 8 November 2013, Pulau Pinang, Malaysia.

Sulaiman, Hamzah Asyrani and Bade, Abdullah and Othman, Mohd Azlishah and Ramlee, Ridza Azri and Misran, Mohamad Harris and Zainudin, Muhammad Noorazlan Shah and Abdullah, Mohd Harun (2013) Measuring Distance between Nearly Intersected Objects in Narrow Phase Collision Detection. Australian Journal of Basic and Applied Sciences. pp. 490-499. ISSN 1991-8178

Sulaiman, Hamzah Asyrani and Meor Said, Maizatul Alice and Ismail, Mohd Muzafar and Pazil, Muhamad Arif and Akmal Subari, Ahmad Zulfadhli (2013) ToGouR: Tour Guide Robot Visualization using Shape Recognition Pattern for Automatic Navigation. International Journal of Engineering and Technology (IJET). pp. 3275-3281. ISSN 0975-4024

Sulaiman, Hamzah Asyrani and Meor Said, Maizatul Alice and Othman, Mohd Azlishah and Mohd Afif, Mohd Fareez (2013) Wireless based Smart Parking System using Zigbee. International Journal of Engineering and Technology. pp. 3282-3300. ISSN 0975-4024

Sulaiman, Hamzah Asyrani and Ramlee, Ridza Azri and Othman, Mohd Azlishah and Misran, Mohamad Harris (2013) Social Networking as Support Tool for Online Teaching and Learning Factors and Contributions. International Journal of Engineering and Technology (IJET) ISSN :. pp. 3270-3274. ISSN 0975-4024

Sulaiman, Marizan and Ibrahim, Zulkifilie and Tawafan, Adnan (2013) DETECTION OF HIGH IMPEDANCE FAULT USING A PROBABILISTIC NEURAL-NETWORK CLASSFIER. Journal of Theoretical and Applied Information Technology, 53 (2). pp. 180-191. ISSN 1992-8645

Sulaiman, Hamzah Asyrani and Bade, Abdullah and Abdullah, Mohd Harun (2013) Distance Approximation using Pivot Point in Narrow Phase Collision Detection. In: 2013 3rd International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering (ICICI-BME), 7-8 November 2013, Bandung.

Sulaiman, Hamzah Asyrani and Bade, Abdullah and Abdullah, Mohd Harun (2013) Distance Computation between Convex Objects using Axis-Aligned Bounding-Box in Virtual Environment Application. In: The 3rd International Conference on Mathematical Sciences, 17 - 19 Disember 2013, Kuala Lumpur.

Sulaiman, Hamzah Asyrani and Bade, Abdullah and Abdullah, Mohd Harun (2013) Distance Computation using Axis Aligned Bounding Box (AABB) Parallel Distribution of Dynamic Origin Point. In: International Conference on Microelectronics, Communication and Renewable Energy (ICMiCR-2013), 4 - 6 June 2013, India.

Sulaiman, Hamzah Asyrani and Bade, Abdullah and Abdullah, Mohd Harun (2013) Quad Separation Algorithm for Bounding-Volume Hierarchies Construction in Virtual Environment Application. Journal of Next Generation Information Technology(JNIT). pp. 63-73. ISSN 2092-8637

Sulaiman, Marizan and Ibrahim, Zulkifilie and Patakor, Fizatul Aini (2013) Sliding Mode Speed Control for Induction Motor Drives with State-Dependent Gain Method. International Review of Electrical Engineering (IREE), 8 (5). pp. 1446-1453. ISSN 1827- 6660

Sulaiman, Marizan and Patakor, Fizatul Aini and Ibrahim, Zulkifilie (2013) DSP BASED IMPLEMENTATION OF FIELD ORIENTED CONTROL OF THREE-PHASE INDUCTION MOTOR DRIVES. International Journal of Research in Engineering and Technology (IJRET), 2 (9). pp. 179-186. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Sulaiman , Marizan and Adnan, Tawafan and Ibrahim, Zulkifilie (2013) Detecting High Impedance Fault in Power Distribution Feeder with Fuzzy Subtractive Clustering Model. Australian Journal of Basic and Applied Sciences (AJBAS), 7 (8). pp. 81-91. ISSN 1991-8178

Sulaiman , Marizan and Adnan, Tawafan and Ibrahim, Zulkifilie (2013) Using Probabilistic Neural Network for Classification High Impedance Faults on Power Distribution Feeders. World Applied Sciences Journal, 23 (10). pp. 1274-1283. ISSN 1818-4952

Sulaiman , Marizan and Mohd Shah, Hairol Nizam and Mohamad Haniff , Harun and Lim , Wee Teck and Mohd Nor Fakhzan, Moha Kazim (2013) A 3D Gluing Defect Inspection System Using Shape-Based Matching Application from Two Cameras. International Review on Computers and Software (IRECOS) , 8 (8). pp. 1997-2004. ISSN 1828-6003

Sulaiman , Marizan and Fizatul Aini, Patakor and Ibrahim, Zulkifilie (2013) A New State-Dependent of Sliding Mode Control for Three-Phase Induction Motor Drives. International Review on Modeling and Simulations, 6 (3). pp. 728-735. ISSN 1974-9821

Sulaiman , Marizan and Imarah, Ummi and Farhana, Siti and Ahmad, Azhar and Shamsuddin, Nur Hazahsha (2013) SIMULATION AND EXPERIMENTAL RESULTS OF SHUNT ACTIVE POWER FILTER FOR HARMONICS REDUCTION BY USING pq-THEORY. International Journal of Energy and Power Engineering Research (IJEPER), 1. pp. 15-23. ISSN 2289-5620

Sulaiman , Marizan and Mohd Shah, Hairol Nizam and Harun, Mohamad Haniff and Lim Wee, Teck and Mohd Kazim, Mohd Nor Fakhzan (2013) 3D Gluing Defect Inspection System Using Shape-Based Matching Application from Two Cameras. International Review on Computers and Software (IRECOS) . pp. 1997-2004. ISSN 1828-6003

Sulaiman , Marizan and Syaffiq, MIK and Shah, HNM and Fakhzan, MN (2013) SIMULATION AND EXPERIMENTAL WORK OF KINEMATIC PROBLEMS FOR KUKA KR 5 SIXX R650 ARTICULATED ROBOT. International Journal of Energy and Power Engineering Research (IJEPER), 1. pp. 6-9. ISSN 2289-5620

Sulaiman , Marizan and Tawafan, Adnan and Ibrahim, Zulkifilie (2013) Broken Conductor Detection on Power Distribution Feeder. International Review on Modeling and Simulations, 6 (2 Part). pp. 441-449. ISSN 1974-9821

Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing (2013) Enterprise-wide Service-Oriented Architecture Initiative with Information Quality for Agility in Services Environment. Science International-Lahore. pp. 1035-1038. ISSN 1013-5316

Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing (2013) The Importance of Considering Information Quality in the Implementation of Service-Oriented Architecture Initiatives. In: IEEE 10th International Conference on Services Computing (SCC), 28 June 2013 - 3 July 2013, Santa Clara Marriott, CA, USA.

Sumaiyah, Abdul Latiff (2013) Applying A Crisp And Fuzzy Analytic Hierarchy Process Method For Spatial Multi-Criteria Decision Analysis [Case Study : Spectacles Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sundram, Ramahlingam (2013) Design And Develop An Integrated Utility System (Water Meter). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suresh Kumar, Somasundram (2013) Statistical approach in solving for initial and eventual wire bonding problem. Masters thesis, UTeM.

Suriati, Akmal (2013) A Semantic Similarity Method For Products And Processes. PhD thesis, Toyohashi University of Technology .

Suthakaran, Solamuthu (2013) Design And Development Of Small-Scale Regenerating Energy Using Brush DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sutikno, Tole and Nik Idris, Nik Rumzi and Jidin , Auzani and JOPRI, MOHD HATTA (2013) FPGA Based Optimized Discontinuous SVPWM Algorithm for Three Phase VSI in AC Drives. International Journal of Power Electronics and Drive System (IJPEDS). pp. 228-240. ISSN 2088-8694

Sutikno, Tole and Nik Idris, Nik Rumzi and Jidin, Aiman Zakwan and Jidin , Auzani (2013) A Model of FPGA-based Direct Torque Controller. TELKOMNIKA: Indonesian Journal of Electrical Engineering. pp. 747-753. ISSN 2302-4046

Sutikno, Tole and Nik Idris, Nik Rumzi and Jidin , Auzani and Marcian, N. Cirstea (2013) An Improved FPGA Implementation of Direct Torque Control for Induction Machines. IEEE Transactions on Industrial Informatics . pp. 1280-1290. ISSN 1551-3203

Syafiq, Ramli (2013) Manufacturing Process Selection For Circular Blade Using Analytical Hierarchy Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafiqah Athirah, Abdul Razak (2013) Redesign Of Drum Packing Workstation At Medium-Scaled Electrical Cables Manufacturer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahidatul Syahira , Abdul Rahman (2013) Numerical modeling of 1-dimensional wave equation using finite modal synthesis. Project Report. UTeM, Melaka. (Submitted)

Syahmi Ikhwan, Che Mohd Nor (2013) Mobile Global Positioning System (GPS) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahrul Hisham , Mohamad and Mohd Karis, Safirin and Jaafar, Hazriq Izzuan (2013) Application of Binary Particle Swarm Optimization in Automatic Classification of Wood Species using Gray Level Co-Occurence Matrix and K-Nearest Neighbor. In: The 3rd Global Conference for Academic Research on Scientific and Emerging Technologies , 9-10 March 2013, Kuala Lumpur, Malaysia..

Syahrul Hisham , Mohamad and Mohd Karis, Safirin and Jaafar, Hazriq Izzuan (2013) Application of Binary Particle Swarm Optimization in Automatic Classification of Wood Species using Gray Level Co-Occurence Matrix and K-Nearest Neighbour. International Journal of Scientific & Engineering Research, 4 (5). pp. 50-55. ISSN 2229-5518

Syamsul Izwani, A Bakar (2013) Co-Curriculum Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syarfadila Ezurida, Shaari (2013) The Development Of Scaffold Design Selection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwan , Zainuddin (2013) Fluid flow characteristic in curved tube heat exchanger by numerical method. Project Report. UTem, Melaka. (Submitted)

Syazwana, Mohamad Sukri (2013) Observations Of D-Region Ionosphere Using Tweek Atmospheric At Low Latitude. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazwani, Yaacob (2013) Mach 3 CNC Machine Software Familiarisation And Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Muhammad Hazwan, Sayed Ali (2013) Mechanical Behavior & Water Absorption Of Metal Matrix Composite (Tin+Rice Husk) Fabricated Via Permanent Mould Casting (Experiment With 5% WT And 15% WT Rice Husk). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Nasharudin, Syed Othman (2013) Rakan Keselamatan UTeM (RKU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Salim , Syed Najib and Rahmat, Mohd Fua'ad and Mohd Faudzi, Ahmad 'athif and Ismail, Zool H. and Sunar, Noorhazirah and Sharatul Izah, Sharatul Izah (2013) TRACKING PERFORMANCE AND DISTURBANCE REJECTION OF PNEUMATIC ACTUATOR SYSTEM. In: Control Conference (ASCC), 2013 9th Asian, 23-26 June 2013, Istanbul.

Syed Zulkarnain, Syed Saidin (2013) Formulation of nanofluid from carbon nanoparticle based for natural convective heat transfer application. Project Report. UTeM, Melaka. (Submitted)

Sylvester, Chong (2013) Noise Level Assessment And Control Measures In Metal Stamping And Fabrication Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

sulaiman, azhar and Abdullah, Abdul Rahim and Aman , Aminudin and NORDDIN, NURBAHIRAH and Zainal Abidin, Nur Qamarina (2013) Performance Analysis of High Voltage Insulators Surface Condition Using Time-frequency Distribution. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

syed mohamed, muhammad syafiq and Mohd Tamrin, Shamsul Bahri and Abdul Rahman, Ahmad Rizal (2013) The Suitability of Cross Cultural Models in Predicting Car Interior Design Preferences. International Journal of Education and Research, 1 (6). pp. 1-12. ISSN 2201-6333

syed mohamed, muhammad syafiq and Ze Mei, Chiang and Hui Hui, Yee (2013) Ergonomics Evaluation on Non Keyboard Input Devices. Universal Journal of Management and Social Sciences, 3 (9). pp. 65-69. ISSN 2226-6240

T

T., Joseph Sahaya Anand and Chua, Kok Yau and Cher, Chia Lee and Hng, May Ting (2013) XRD analysis of Cu-Al interconnect intermetallic compound in an annealed micro-chip. Advanced Materials Research, 620. pp. 166-172. ISSN 10226680

T., Joseph Sahaya Anand and S., Shariza (2013) Optical Studies of Transition Metal Chalcogenide MoSe2 Thin Films. Far East Journal of Electronics and Communications, 11 (1). pp. 57-66. ISSN 0973-7006

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) MECHANICAL PROPERTIES OF INTERMETALLIC NICKEL ALUMINIDES (Ni3Al). Far East Journal of Electronics and Communications, 11 (1). pp. 47-56. ISSN 0973-7006

T., Joseph Sahaya Anand and Chua, Kok Yau (2013) Micro-structural Studies of Thermosonic Cu-Al Bonding Interface. In: Joint International Conference on Nanoscience, Engineering and Management, 19-21 August 2013, Penang. (In Press)

T., Joseph Sahaya Anand and Chua, Kok Yau (2013) Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads. Current Applied Physics, 13 (8). pp. 1674-1683. ISSN 1567-1739

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz (2013) Electro synthesised NiTe2 Thin Films with the Influence of Additives. In: Joint International Conference on Nanoscience, Engineering and Management, 19-21, August, 2013, Penang. (In Press)

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz and S., Shariza (2013) Effect of Additives on Optical Measurements of NiSe2 Thin Films. Procedia Engineering , 53. pp. 555-561. ISSN 1877-7058

T., Joseph Sahaya Anand and Rajes, KM Rajan and Mohd Zaidan , Abdul Aziz (2013) Electrosynthesized NiS2 thin films and their optical and semiconductor studies. Reports in Electrochemistry, 3. pp. 25-29. ISSN 2230-4096

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli and Azizah, Shaaban and Sivarao, Subramonian and Mohamad, Radzai Said and S., Thiru (2013) Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route. World Applied Sciences Journal, 21. pp. 60-67. ISSN 1818-4952

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body. Current Research in Malaysia (CREAM), 2 (2). pp. 61-72. ISSN 2231–8305

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd. Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2013) Implementation of Anti-Windup PI Speed Controller for Induction Motor Drive Using dSPACE and Matlab/Simulink Environment. Australian Journal of Basic and Applied Sciences, 7 (7). pp. 348-357. ISSN 1991-8178

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2013) Characteristic of Induction Motor Drives Fed by Three Leg and Five Leg Inverters. Journal of Power Electronics (JPE), 13 (5). pp. 806-813. ISSN 1598-2092

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2013) Characteristic of induction motor drives fed by three leg and five leg inverters. Journal of Power Electronics (JPE), 13 (5). pp. 806-813. ISSN 1598-2092

Tan, Beng Hong (2013) Design, Optimization And Prototyping Of Multipurpose Weld Electrode Holder. Project Report. UTeM, Melaka. (Submitted)

Tan, CheeFai (2013) The Self-Reported Seat Discomfort Survey on Economy Class Aircraft Passenger in the Netherlands. Australian Journal of Basic and Applied Sciences. pp. 563-570. ISSN 1991-8178

Tan, CheeFai (2013) Total Design of Active Neck Support System for Economy Class Aircraft Seat. Applied Mechanics and Materials. pp. 657-660. ISSN 1660-9336

Tan, CheeFai and Ismail, N. (2013) Design of a Feature Recognition System for CAD/CAM Integration. World Applied Sciences Journal, 21 (8). pp. 1162-1166. ISSN 1818-4952

Tan, CheeFai and Ismail, N. and Ranjit, S.S.S. (2013) Feature Recognition System for Rotational Features. Journal of Applied Sciences. ISSN 1812-5654

Tan, CheeFai and Ranjit, S.S.S. and Said, M.R. and Dhamalingam, Sivakumar and SUBRAMONIAN, SIVARAO (2013) Fire Fighting Mobile Robot: State of the Art and Recent Development. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 220-230. ISSN 1991-8178

Tan, CheeFai and Ranjit Singh, Sarban Singh and V.K., Kher and B.T., Tan (2013) Integrated Steering System Design for Bus Driver Drowsy Behavior Change. Applied Mechanics and Materials, 315. pp. 231-235. ISSN 1660-9336

Tan, CheeFai and Rauterberg, G.W.M and Chen, W. and Kher, V.K (2013) Adaptive Body Support System for Aircraft Seat. Applied Mechanics and Materials, 263-266. pp. 1232-1235. ISSN 1660-9336

Tan, CheeFai and Tean, Z.Y. and Said, M.R. and Khalil, S.N. and Sudin, M.N. and Karjanto, Juffrizal and Yusof, N.M. and Sivarao, Subramonian (2013) Conceptual design of cantilever support for long haul bus passenger seat. Australian Journal of Basic and Applied Sciences. pp. 383-387. ISSN 1991-8178

Tan, CheeFai and V.K., Kher and S.S., S. Ranjit (2013) An Interactive System for Concurrent Engineering Design. Applied Mechanics and Materials, 313-314. pp. 990-994. ISSN 16609336

Tan, Chen Wei (2013) Mobile Phone Usage Alert System For Petrol Station. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chun Chieh (2013) Shopping Mall Promotion Tracker Subsystem For Pin-It Social Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Hooi Gia (2013) How Video Can Persuade Malaysian Young Adult To Make Product Purchase : A Study On Character, Slogans And Sound Elements. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Jye Gin (2013) Design Of Micro-Power Generator Based On Electromagnetic Mechanism Harvesting Energy From Direct Air Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Shan Shan (2013) Hard Disk Drive Serial Number Recording And Inventory System Using Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chee Fai (2013) Design Optimization And Up - Scalling Of Fire Fighting Machine: Water Spraying And Track Mechanism System Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, CheeFai and Ranjit, S.S.S. and Karjanto, Juffrizal and Yusof, N.M. and Khalil, S.N. and Dhar Malingam, Sivakumar (2013) Conceptual Design for Multi Terrain Mobile Robot. Australian Journal of Basic and Applied Sciences. pp. 300-308. ISSN 1991-8178

Tan, CheeFai and Ranjit Singh, Sarban Singh and V.K. , Kher and H.F. , Kong (2013) Up-Scaling and Optimisation of Fire Fighting Ground Vehicle Track System. Applied Mechanics and Materials, 315. pp. 236-240. ISSN 1660-9336

Tan, Pi Hua and Gan, Chin Kim (2013) Methods of Lightning Protection for the PV Power Plant. In: 2013 IEEE Student Conference on Research & Development (SCOReD), 16-17 December 2013, Putrajaya.

Tan, Poh Ee (2013) Attractive place and food in Kelantan 吉兰丹叫人思念的一抹微蓝. Singapore Press Holding, Singapore.

Tang, Han Yang (2013) Online Based Signature Verification Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tarmizi, Ahmad Izzuddin and Jali, Mohd Hafiz and Hafez , Sarkawi (2013) A Review of Resonant Converter Control Techniques and The Performances. In: Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Kementerian Pendidikan Malaysia, Ke-3, 2-3 Julai 2013, EDC, Universiti Utara Malaysia.

Taufiq, Alias (2013) Simulation System On Productivity Using Smartmost Work Study Technique At Aerospace Manufacturing Company (E-MOST). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tay, Choo Chuan (2013) Form 4 Bilingual Terminology Additional Mathematics. Penerbitan Daya Sdn. Bhd.(188832-X), Selangor, Malaysia. ISBN 9789838258777

Tay, Choo Chuan (2013) Form 4 Terminology Mathematics - Bilingual. Penerbitan Daya Sdn. Bhd.(188832-X), Selangor, Malaysia. ISBN 9789838258753

Tee, Ee Leng (2013) Automated Road Construction Safety Traffic Light System For 2 Lanes Road Closure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teng, Kuan Hui (2013) Experimental study of the behaviour of baphasic materials. Project Report. UTeM, Melaka. (Submitted)

Teng, Jin Chung (2013) Portable Physiotheraphy Limbs Rehabilitation Robot - User Interface And Data Manipulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Zawawi , Tengku Nor Shuhada and Abdullah, Abdul Rahim and Shair, Ezreen Farina and Isa, Halim (2013) Electromygraphy Signal Analysis Using Spectrogram. In: 2013 IEEE Student Conference on Research and Development (SCOReD), 16-17 December 2013, Putrajaya, Malaysia.

Teo, Chee Huat (2013) Pedestrians Emerging And Safety Alert System In Public Buses For Road Users. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teo, Chun Earn (2013) Design and fabrication of polyvinyl chloride tie-rod cylinder for low pressure water hydraulic system. Project Report. UTeM, Melaka. (Submitted)

Teoh , Yong Siang (2013) Customer demand and planning efficiency in overall equipment effectiveness (OEE). Masters thesis, Universiti Teknikal Malaysia Melaka.

Thailis Bounya , Ngelayang (2013) The impact of Gate-Induced Drain Leakage (GIDL) on scaled MOSFET for low power application. Project Report. UTeM. (Submitted)

Tham, Kar Mun (2013) Exploring The Failure Mode And Mechanical Properties Of Spot Welded Dissimilar Joints For Austentic Stainless And Galvanized Steels. Project Report. UTeM, Melaka. (Submitted)

Thanabalan, Kuppusamy (2013) Development Of Demand Response Control Interface To Maximise Energy Utilisation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thien, Kai Lip (2013) Total Design Of Multipurpose Tray For KTM Train Seat. Project Report. UTeM, Melaka. (Submitted)

Thong, Ming Chuin (2013) Redesign Of Bombardier PUTRA LRT Seat. Project Report. UTeM, Melaka. (Submitted)

Tiang, Leh Mei (2013) Visual Representation Of Augmented Reality Mobile Dictionary Application On Android Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tie, Chin Ho and Gan, Chin Kim (2013) Impact of Grid-Connected Residential PV Systems on the Malaysia Low Voltage Distribution Network. In: 2013 IEEE 7th INTERNATIONAL POWER ENGINEERING AND OPTIMIZATION CONFERENCE, 3-4 Jun 2013, Bayview Hotel Langkawi.

Tong, Ho Yow (2013) Real Time Traffic Light Fault Detection And Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Norhasmira , Tuan Haris (2013) Numerical modelling of simple harmonic oscillator. Project Report. UTeM, Melaka. (Submitted)

Tuani Ibrahim, Ahamed Fayeez and Gannapathy, Vigneswara Rao and Md Isa, Ida Syafiza and Sarban Singh, Ranjit Singh and Subramaniam, Siva Kumar (2013) Throughput Analysis of Energy Aware Routing Protocol for Real-Time Load Distribution in Wireless Sensor Network (WSN). Internaltional Journal of Reseach Engineering and Technology, Vol 02. pp. 540-544. ISSN 2319-1163

tamaldin, noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and ABDULLAH, Mohd Azman (2013) Design Optimization of Thermal Management System for Electric Vehicle Utilizing CFD Analysis, DFMEA and CES. Procedia Engineering , 68. pp. 305-312. ISSN 1877-7058

tang, s.h. and Kanasen, n.k. and motlagh, o (2013) An algorithm for navigation of mobile robots in cluttered environments. Advanced Science Letters. xxxx-xxxx. ISSN xxxx

U

Umikalsom , Yunus (2013) Study on the effect of employees' incentives scheme benefits on company's performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ummi Kalsom, Mohamad Hashim (2013) Land Surface Temperature Determination For Selangor Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ummi Nazirah, Jamil Khair (2013) Real-Time Wireless Face Recognition System (RT-WiFARES). Project Report. UTeM, Melaka, Malaysia. (Submitted)

V

Vasanthan, Sakthi Velu (2013) Motion Control Of Pneumatic Muscle Actuator : Experimental Setup And Modeling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vikneshwaran, Naidu (2013) Wireless Data Logger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vikneswaran, Kanathasan (2013) Video Streaming Quality In Wireless Mesh Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vivek, Regeev (2013) The Design Of A Torque Feedback Controller For An Upper Limb Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

W. Daud, W. M. Bukhari (2013) Surface Electromyography of Eyes Potential Behaviour using Wavelet Transform Analysis. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 64-71. ISSN 1991-8178

W. Daud, W. M. Bukhari (2013) Electromyography Signals on Biceps Brachii Muscle in Time Domain Analysis. Prosiding Seminar Hasil Penyelidikan Sektor Pengajian Tinggi Ke-3 2013. pp. 567-578. ISSN 978-967-0334-85-1

W. Daud, W. M. Bukhari (2013) Features Extraction of Electromyography Signals in Time Domain on Biceps Brachii Muscle. International Journal of Modelling and Optimization (IJMO), 3 (6). pp. 515-519. ISSN 2010-3697

Wahidah , Md. Shah (2013) Optimised localisation (OpLoc) for community networks. PhD thesis, UTeM.

Wahjono, Sentot Imam and Milal, A. Dzo’ul and Marina, Anna and Harryono, Sumadji (2013) Transformational Leadership At Muhammadiyah Primary Schools On Emotional Intelligence : Forward Bass & Avolio Theory. IOSR Journal of Business and Management (IOSR-JBM), 12 (2). pp. 33-41. ISSN 2319-7668

Wahyono Sapto, Widodo (2013) Study And Design Of Multi-Blade Wind Energy Conversion System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wai, C. Mun and Rivai, Ahmad and Bapokutty, Omar (2013) Modelling optimization involving different types of elements in finite element analysis. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1-4 July 2013, Kuantan, Pahang, Malaysia.

Wai, Chee Mun and Rivai, Ahmad and Bapokutty, Omar (2013) EFFECT OF ELEMENTS ON LINEAR ELASTIC STRESS ANALYSIS: A FINITE ELEMENT APPROACH. International Journal of Research in Engineering and Technology, 02 (88). pp. 561-567. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Wan Ab Haneef, Wan Ab Hapiz (2013) Analysis Of Embedded Router Universal Plug And Play (UPnP) Media Server Performance Over Wireless. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Daud, Wan Mohd Bukhari and Chong, Shin Horng and Sulaima, Mohamad Fani (2013) Features Extraction of Electromyography Signals in Time Domain on Biceps Brachii Muscle. 2013 International Conference on Computer and Software Modelling. pp. 515-519. ISSN 2010-3697

Wan Hasrulnizzam , Wan Mahmood and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzzaman and Adi, Saptari and Zuhriah, Ebrahim and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah (2013) Manufacturing Performance in Green Supply Chain Management. World Applied Sciences Journal. pp. 76-84. ISSN 1818-4952

Wan Izzuddin, Che Wan Nor Azizi (2013) Optimal Location For Solar Energy Storage System (SES) On Grid Connection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzaman and Saptari, Adi and Ebrahim, Zuhriah and Mohamed Sultan, Al Amin and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah (2013) Manufacturing Performance in Green Supply Chain Management. World Applied Sciences Journal 21(Special Issue of Engineering and Technology). pp. 76-84. ISSN 1818-4952

Wan Mohd Ghazali, Khadijah and Hassan, Rosilah and Md. Ali, Zulkarnain (2013) A Network Device Simulator in Android Platform. In: The 15th International Conference on Advanced Communications Technology (ICACT2013), 27 - 30 January 2013, Phoenix Park, South Korea.

Wan Mohd Hanis , Wan Harun (2013) Investigation of thermal conductivity and viscosity of nanofluid. Project Report. UTeM, Melaka. (Submitted)

Wan Muhammad Akramuddin, Abdul Rahman (2013) An Alert System For Web Server. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Noor Aini, Wan Makhzan (2013) Analysis Of Low Pass Filter Using Bowtie Defected Ground Structure (DGS) At 10 GHZ For Radar Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norazrini , Idris (2013) Model Matematik "Hibrid-Mekanikal Berasaskan Rim" Menggunakan Roda Tenaga Dwi-Jisim Untuk Mengoptimumkan Penggunaan Tenaga Dalam Motosikal Hibrid-Mekanikal. Project Report. UTeM, Melaka. (Submitted)

Wan Nurul Sharmila, Wan Hanafi (2013) Auto Triggered Current Cut-Off System For Energy Saving. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Salwani, Wan Harun (2013) Nighttime D-Region Ionospheric Characteristic From Tweek Atmospheric Observed In The Mid Latitude Region. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Disember 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Julai 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Jun 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Mei 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan November 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Ogos 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Oktober 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan September 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Januari 2014. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan April 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Februari 2013. Perpustakaan UTeM. (Unpublished)

Wizana, Abd Jalil (2013) Pelaporan Mesyuarat Jawatankuasa Tinggi Senat Penyelidikan Dan Inovasi Bulan Mac 2013. Perpustakaan UTeM. (Unpublished)

Wong, Kian Loon (2013) Innovative lighting system design with magnetic levitation principle. Project Report. UTeM, Melaka. (Submitted)

Wong, Tze Mei (2013) Smart Health Alert System Via Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Wei Ming (2013) Routing System With Informative Display For Public (R-SID). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yan Chiew and Arslan, Tughrul and T. Erdogan, Ahmet and El-Rayis, Ahmed (2013) Efficient Ultra High Voltage Controller Based Complementary Metal Oxide Semiconductor Switched Capacitor DC-DC Converter For Radio Frequency Micro Electro Mechanical Systems Switch Actuation. IET Circuits, Devices & Systems, 7 (2). pp. 59-73. ISSN 1751-858X

Wong , Chee Yin (2013) Performance analysis of smartphone based real-time driver system over IEEE 802.11 wireless networks. Project Report. UTeM. (Submitted)

Wong, , Hee Kiong (2013) Measurement of structure-borne noise from road input in a motor vehicle cabin. Project Report. UTeM, Melaka. (Submitted)

Y

YAAKOB, MOHD YUHAZRI and AMIR MOHAMED, KAMARUL and ABDUL HAMID, RAHIMAH and HASOLOAN , HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ (2013) An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Daytime. Applied Mechanics and Materials , 315 (2013). pp. 783-787. ISSN 1662-7482

YAAKOB, MOHD YUHAZRI and AMIR MOHAMED, KAMARUL and HASOLOAN , HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ and RAJA ABDULLAH, RAJA IZAMSHAH (2013) An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Night. Applied Mechanics and Materials , 315 (2013). pp. 788-792. ISSN 1662-7482

Yahaya, Saifudin Hafiz and Sihombing, Haeryip and Yaakob, Mohd Yuhazri (2013) G2 Bézier-Like Cubic as the S-Transition and C-Spiral Curves and Its Application in Designing a Spur Gear Tooth. Australian Journal of Basic and Applied Sciences. pp. 109-122. ISSN 1991-8178

Yahya, S. and Kamalrudin, M. and Sidek, S. (2013) A review on tool supports for security requirements engineering. In: Open Systems (ICOS), 2013 IEEE Conference on.

Yamaguchi, Masayuki and Yokohara , Tadashi and Md Ali , Mohd Amran (2013) Effect of flexible fibers on rheological properties of poly(Lactic Acid) composites under elongational flow. Journa of the Society of Rheology Japan. pp. 129-135. ISSN 0387-1533

Yap, , Wan Loong (2013) Design Development Of Load Carrier Type AGV. Project Report. UTeM, Melaka. (Submitted)

Yap, Paul Yin (2013) Windows Phone 8 Diet Monitoring Application Among Overweight And Obese Adolescents Through Augmented Reality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Xue Nee (2013) The Effect Of Air Pollution Control Service On Customer Satisfaction (A Case Study At Company XYZ). Project Report. UTeM, Melaka. (Submitted)

Yap Kee, Sin (2013) Effect of burr formation and surface roughness in surface grinding of XW-42 alloy. Masters thesis, UTeM.

Yin Fen, Low (2013) Objective Measure Development For Attention-Related Electroencephalographic Activities Unduced By Transcrabial Magnetic Stimulation (TMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yogan , Jaya Kumar and Naomie, Salim (2013) Feed-Forward Network Model for Multi-Document Relation Classification. International Journal of Innovative Computing, 1 (1). pp. 1-4. ISSN 2180-4370

Yong, Sze Yeau (2013) Design Analysis Of High Performance Motorcycle Disc Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong Chea, Chee (2013) Payment Behaviour Of Small And Medium Size Oil Palm Plantation Borrowers. Project Report. UTeM, Melaka. (Submitted)

Yong Chea, Chee (2013) Payment Behaviour Of Small And Medium Size Oil Palm Plantation Borrowers. Project Report. UTeM, Melaka. (Submitted)

Yong Wee, Sek and Syariffanor, Hisham and Ahmad Naim, Chee Pee and Chin Foon, Khoo (2013) Measuring User Beliefs And Attitude On Using Pedagogical Tool In Learning Engineering Mathematics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuearajan, Santhiran (2013) Modeling And Simulation Of Drawing Process On Aluminium AA7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuhazri, M.Y. and Jennise, T.T.T. and Sihombing, H. and M. Radzai , Said and Nirmal, U. and Megat Ahmad, M.M.H. (2013) Tensile Properties of Angle Cured Laminated Composites Structures under Gravity Effects. Applied Mechanics and Materials, 465-46. pp. 101-105. ISSN 1662-7482

Yun Huoy, Choo and Azah Kamilah, Muda (2013) A New Associative Classification Using Genetic Algorithm Pruned Decision Tree. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yuniawan, Dani and Ito, Teruaki and Mohamad, Effendi (2013) A proposal of total productive maintenance training system. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Yuniawan, Dani and Teruaki, Ito and Mohamad, Effendi (2013) Calculation of overall equipment effectiveness weight by Taguchi method with simulation. CONCURRENT ENGINEERING: Research and Applications, 21 (4). pp. 296-306. ISSN 1063-293X

Yunus, Ahmad Rozelan (2013) PERSONALITI DAN KEAKURAN: FAKTOR MEMPENGARUHI PENCAPAIAN AKADEMIK. Project Report. Penerbit UTeM.

Yunus, Ahmad Rozelan and Aris, Amir and Abdul Majid, Izaidin and Md Saad, Mohd Shamsuri (2013) Personality-Environment Congruency of Land Settlement Youth Entrepreneurs in Malaysia. Research Report UTeM. pp. 1-13. ISSN PJP/2011/FPTT (7D) S00950 (Submitted)

Yusmady, Mohamed Arifin and Safarudin Ghazali, Herawan and Mohamad Firdaus, Sukri (2013) A Study On Improving Air Circulation In A Confined Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusof, Ahmad Anas and Mat, Shafizal and Din, Abdul Talib (2013) Promoting Sustainability through Water Hydraulic Technology – The Effect of Water Hydraulic in Industrial Scissor Lift. Applied Mechanics and Materials, 315 (10.4028/www.scientific.net/AMM.315.488). pp. 488-492. ISSN 10.4028

Yusof, Ahmad Anas and Wasbari, Faizil and Mohamad Shukri , Zakaria and Ibrahim, Mohd Qadafie (2013) Slip Flow Coefficient Analysis in Water Hydraulics Gear Pump For Environmental Friendly Application. IOP Conf. Series: Materials Science and Engineering, 50. pp. 1-8. ISSN 1757-899X

Yusof, Ahmad Anas and Wasbari, Faizil and Ibrahim, Mohd Qadafie (2013) Research Development of Energy Efficient Water Hydraulics Manipulator for Underwater Application. Applied Mechanics and Materials, 393. pp. 723-728. ISSN 1660-9336

Yusra Liyana , Jaafar (2013) Feasibility study of the design artificial disc replacement prostheses. Project Report. UTeM, Melaka. (Submitted)

Yusuf, Yusliza and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Mahamud, Zainab and Kwan, Wai Loon (2013) Ti6Al4V Surface Hardness Improvement by Duplex Coating. Advanced Materials Research, 701. pp. 370-374. ISSN 1662-8985

Yusuf, Yusliza and Omar, Nooririnah and Azhari, Muhamad Azwar and Md Johari, Md Ashadi (2013) Corrosion Behavior of Various Surface Treatments TI-6Al-4V Alloy- A Review. Advanced Materials Research, 849. pp. 58-61. ISSN 1662-8985

Yusuf, Y. and Juoi, J. M. and Rosli, Z. M. and Kwan , W. L. and Mahamud, Z. (2013) Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy. Pertanika Journal of SCience and Technology, 21 (1). pp. 45-58. ISSN 0128-7680

Yusuf, Yusliza and Mohamad Juoi, Jariah and Mohd. Rosli, Zulkifli and Kwan, Wai Loon and Mahamud, Zainab (2013) Effect of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti6Al4V alloy. Pertanika Journal Science and Technology, 21. pp. 45-58. ISSN 0128-7680

Yusuf, Yusliza and Mohd. Rosli, Zulkifli and Mohamad Juoi, Jariah and Mahamud, Zainab and Kwan, Wai Loon (2013) The influence of substrate treatment on load carrying capacity of Ti6Al4V Duplex Coating. Procedia Engineering . pp. 1-6. ISSN 1877-7058 (Unpublished)

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohamed, Norhafiza (2013) THE TRANSLATIONAL PROCESS OF CLEANER PRODUCTION STRATEGIES. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (5). pp. 29-39. ISSN 2231-9700

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Rosdi, Mohd Noor Hanif (2013) THE TRIGGER SIGNAL FOR LEAN PRODUCTION PRACTICES : A REVIEW. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 3 (6). pp. 23-32. ISSN 2231-9700

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Tukimin, Rahayu (2013) A Review on Optimistic Impact of Cleaner Production on Manufacturing Sustainability. Journal of Advanced Manufacturing Technology (JAMT) . pp. 79-99. ISSN 1985-3157

Z

Zabri, S.N. and Cahill, R. and Schuchinsky, A. (2013) Polarisation independent split ring frequency selective surface. Electronics Letters, 49 (4). p. 245. ISSN 0013-5194

Zahra , Hosseini and Hamed , Fazlollahtabar and Iraj , Mahdavi and Minhat, Mohamad (2013) A Mathematical Model for Waste Management in Reverse Supply Chain. In: Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management, January 7 – 9, 2014, Bali, Indonesia. (Submitted)

Zahriladha, Zakaria (2013) Development of Coaxial Transverse Electromagnetic (TEM) Resonator Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Nur Qamarina and Abdullah, Abdul Rahim and Rahim, Nor Hidayah and NORDDIN, NURBAHIRAH and Aman, Aminudin (2013) Online surface condition monitoring system using time-frequency analysis technique on high voltage insulators. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3-4 June 2013, Langkawi, Malaysia.

Zainal Abidin, Zaheera and Manaf, Mazani and Shibghatullah, Abdul Samad (2013) Experimental Approach On Thresholding Using Reverse Biorthogonal Wavelet Decomposition For Eye Image. 2013 IEEE International Conference on Signal and Irnage Processing Applications (ICSIPA). pp. 1-5. ISSN 978-1-4799-0269-9/13

Zainal Abidin, Zaheera and Manaf, Mazani and Shibghatullah, Abdul Samad (2013) Feature Extraction From Epigenetic Traits Using Edge Detection In Iris Recognition System. 2013 IEEE International Conference on Signal and Irnage Processing Applications. pp. 1-5. ISSN 978-1-4799-0269-9

Zainal Abidin, Zaheera and Manaf, Mazani and Shibghatullah, Abdul Samad and Jusoff, Kamaruzaman and Ahmad, Rabiah and Ayop, Zakiah and Anawar, Syarulnaziah and Shaaban, Azizah and Yusoff, Mariana (2013) A New Hybrid Embedding Method in Iris Biometric System. Australian Journal of Basic and Applied Sciences. pp. 1-5. ISSN 1991-8178

Zainal Abidin, M.I. and Mahmud, J. and Abd Latif, M.J. and Jumahat, A. (2013) Experimental and Numerical Investigation of SUP12 Steel Coil Spring. Procedia Engineering . pp. 251-257. ISSN 1877-7058

Zainila, Salam (2013) Design and simulation of proposed automation system in existing manufacturing work environment. Masters thesis, UTeM.

Zainordin, Ahmad Zaifazlin and ABDULLAH, Mohd Azman and Hudha, Khisbullah (2013) Experimental Evaluations on Braking Responses of Magnetorheological Brake. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME). pp. 195-199. ISSN 2320-4052

Zainordin, Ahmad Zaifazlin and ABDULLAH, Mohd Azman and Hudha, Khisbullah (2013) Modelling and validation of magnetorheological brake responses using parametric approach. IOP Conf. Series: Materials Science and Engineering. pp. 1-8. ISSN 1757-899X

Zainuddin, Hidayat and Lewin, P. L. and Mitchinson, P. M. (2013) Partial discharge characteristics of surface tracking on oil-impregnated pressboard under AC voltages. In: IEEE 2013 International Conference on Solid Dielectrics, 30 June - 4 July 2013, Bologna, Italy.

Zainuddin, N. A and Zakaria, Z and Abd Aziz, M. Z. A and Husain , M. N and Mutalib, M. A (2013) Investigation of Meander Slots To Microstrip Patch Antenna. In: Proceeding of the 2013 IEEE International Conference on RFID Technologies and Applications, 4 - 5 September 2013, Johor Bahru, Malaysia.

Zainuddin, N. A and Zakaria, Z and Husain , M. N and Mohd Derus, B and Abd Aziz, M. Z. A and Mutalib, M. A and Othman, M. A (2013) Design of Wideband Antenna for RF Energy Harvesting System. In: 2013 3rd International Conference on Instrumentation, Communications, Information Technology, and Biomedical Engineering (ICICI-BME), 7-8 November 2013, Bandung.

Zakaria, Kamarul Ariffin (2013) Elevated Temperature Fatigue Life Investigation of Aluminium Alloy based on the Predicted S-N Curve. Jurnal Teknologi, UTM. pp. 75-79. ISSN 0127-9696

Zakaria, Muhammad Zulfattah (2013) Development of Flexible Mirror Holder For cCXRS Diagnostics for ITER. Lambert Academic Publisher, Saarburuecken, Germany. ISBN 978-3-659-42569-1

Zakaria, Z and Jawad, M. S and Othman, A. R and Gannapathy, V. R (2013) A Low-Loss Coaxial Cavity Microwave Bandpass Filter with Post-Manufacturing Tuning Capabilities. International Journal of Engineering and Technology (IJET) ISSN :. pp. 4412-4422. ISSN 0975-4024

Zakaria, Z and Omar, N and Othman , A. R and Jawad, M. S and Ismail, A and Salleh, A and Sam , W. Y (2013) Recent Trends on Dual- and Triple-Band Microwave Filters for Wireless Communications. Australian Journal of Basic and Applied Sciences. pp. 235-243. ISSN 1991-8178

Zakaria, Z and Sam , W. Y and Abd Aziz, M. Z. A and Jusoff, K and Othman, M. A and Ahmad, B. H and Mutalib, M. A and Suhaimi, S (2013) Hybrid Topology of Substrate Integrated Waveguide (SIW) Filter and Microstrip Patch Antenna for Wireless Communication System. Australian Journal of Basic and Applied Sciences. pp. 24-34. ISSN 1991-8178

Zakaria, Zahriladha and Sam , W. Y and Abd Aziz, M. Z. A and Mutalib, M. A and Haron, Nor Zaidi (2013) A Novel Structure of Multilayer SIW Filter and Patch Antenna. International Journal of Engineering and Technology (IJET), 5 (5). pp. 4400-4411. ISSN 0975-4024

Zakaria, Kamarul Ariffin (2013) Comparative study of fatigue life behaviour of AA6061 and AA7075 alloys under spectrum loadings. Materials and Design, 49. pp. 48-57. ISSN 0261-3069

Zakaria, Kamarul Ariffin (2013) Influence of spectrum loading sequences on fatigue life in a high-temperature environment. Engineering Failure Analysis, 30. pp. 111-123. ISSN 0025-5300

Zakaria, Muhammad Zulfattah (2013) Development of Flexible Mirror Mounts for cCXRS Diagnostics for ITER: Design, Calculation and Simulation of Flexures. Lambert Academic Publisher, Saarbruecken, Germany. ISBN 978-3659425691

Zakaria, Muhammad Zulfattah and Saleman, Abdul Rafeq and Zakaria, Mohd Shukri and Jumaidin, Ridhwan and Mohd Hanafi, Mohd Hafidzal and Idris, Norain and Zakaria, Nazri Huzaimi and Mohd Najib , Ali Mokhtar and Mohd Isa, Nur Shakinah (2013) Gnielinski method in calculating the heat transfer coefficient for metallic solar tower absorber. Procedia Engineering , 68. pp. 293-298. ISSN 1877-7058 (Submitted)

Zakaria, Nazri Huzaimi and Mohamad Zin, Mohd Rody and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Elastohydrodynamics Lubrication for Bio-Based Lubricants in Elliptical Conjunction. Procedia Engineering , 68. pp. 123-129. ISSN 1877-7058

Zakaria, Z and Mutalib, M. A and Mohamad Isa, Mohd Sa'ari and Md Isa, A. A and Zainuddin, N. A and Sam , W. Y (2013) Design of Generalized Chebyshev Lowpass Filter with Defected Stripline Structure (DSS). In: 2013 IEEE Symposium on Wireless Technology and Applications (ISWTA), 22-25 September 2013, Kuching, Malaysia.

Zakaria, Z and Mutalib, M. A and Mohamad Isa, Mohd Sa'ari and Zainuddin, N. A (2013) Transformation of Generalized Chebyshev Lowpass Filter Prototype to Suspended Stripline Structure Highpass Filter for Wideband Communication Systems. In: Proceeding of the 2013 IEEE International Conference on RFID Technologies and Applications, 4 - 5 September 2013, Johor Bahru, Malaysia.

Zakaria, Z and Mutalib, M. A and Mohamad Isa, Mohd Sa'ari and Zainuddin, N. A and Sam , W. Y and Othman , A.R (2013) Design of Microstrip Bandpass Filter with Defected Microstrip Structure (DMS). Australian Journal of Basic and Applied Sciences. pp. 263-270. ISSN 1991-8178

Zakaria, Z and Mutalib , M. A and Jusoff, K and Mohamad Isa, Mohd Sa'ari and Othman, M. A. and Ahmad , B. H and Abd Aziz, M. Z. A and Suhaimi, S (2013) Current Developments of Microwave Filters for Wideband Applications. World Applied Sciences Journal 21(Special Issue of Engineering and Technology). pp. 31-40. ISSN 1818-4952

Zakaria, Z and Sam , W. Y and Abd Aziz, M. Z. A and Ismail, M. M (2013) The Integration Of Rectangular SIW Filter and Microstrip Patch Antenna Based On Cascaded Approach. Procedia Engineering . pp. 347-353. ISSN 1877-7058

Zakaria, Z and Sam , W. Y and Abd Aziz, M. Z. A and Mutalib , M. A and Md Saat, M. S (2013) A New Class of Dual-mode Substrate Integrated Waveguide (SIW) Filter with Two Metalized Posts. Australian Journal of Basic and Applied Sciences. pp. 170-177. ISSN 1991-8178

Zakaria, Z and Zainuddin, N. A and Abd Aziz, M. Z. A and Husain , M. N and Mutalib, M. A (2013) Dual-Band monopole Antenna For Energy Harvesting System. In: 2013 IEEE Symposium on Wireless Technology and Applications (ISWTA), 22-25 September 2013, Kuching, Malaysia.

Zakaria, Z and Zainuddin, N. A and Abd Aziz, M. Z. A and Husain , M. N and Mutalib, M. A (2013) A Parametric Study on Dual-Band Meander Line Monopole Antenna For RF Energy Harvesting. In: Proceeding of the 2013 IEEE International Conference on RFID Technologies and Applications, 4 - 5 September 2013, Johor Bahru, Malaysia.

Zakaria, Z and Zainuddin, N. A and Husain , M.N and Abd Aziz, M. Z. A and Mutalib, M. A and Othman , A. R (2013) Current Developments of RF Energy Harvesting System for Wireless Sensor Networks. Advances in information Sciences and Service Sciences(AISS). pp. 328-338. ISSN 1976-3700

Zamberi, Jamaludin and Shariman, Abdullah and Nur Aidawaty, Rafan (2013) Robust Motion Controller Design And Accurate Positioning System For A Sliding Table. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamzuri , Hassan (2013) Automated pallets tracking system for manufacturing assembly area. Masters thesis, UTeM.

Zanariah, Jano and Razilah , Abdul Rahim and Mariana, Yusoff and Noorli, Khamis and Rabiah, Ahmad and Linda , Khoo Mei Sui and Norida, Abdullah (2013) Assessing the Use of Mobile Technology for Technical English. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 18-23. ISSN 1991-8178

Zawani, Abdul Hadi (2013) Study Of Harmonic Current Reduction In A Office Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zetty Zuraida, Saharudin (2013) Design Wideband Microstrip Antenna Using Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zhu, Zi Qiang and Mohd Jamil, Mohd Luqman and Wu, Li Jian (2013) Influence of Slot and Pole Number Combinations on Unbalanced Magnetic Force in PM Machines With Diametrically Asymmetric Windings. IEEE Transactions on Industry Applications, 49 (1). pp. 19-30. ISSN 0093-9994

Zuber Ahmadi, Muhd Zharif Rifqi and Jidin, Auzani and Jaffar, Kamilah and Othman, Md Nazri and Ravin Nair, P. Nagarajan and JOPRI, MOHD HATTA (2013) Minimization of Torque Ripple Utilizing by 3-L CHMI in DTC Muhd. In: 2013 IEEE 7th INTERNATIONAL POWER ENGINEERING AND OPTIMIZATION CONFERENCE, 3-4 Jun 2013, Bayview Hotel Langkawi.

Zuber Ahmadi, Muhd Zharif Rifqi and Jidin, Auzani and Mohamad Sapiee, Mohd Razali and Othman, Md Nazri and P.Nagarajan, Ravin Nair and Jopri, M.H (2013) Digital Implementation of Direct Torque Control of Induction Machines. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Zuber Ahmadi, Muhd Zharif Rifqi and Jidin , Auzani and Mohamad Sapiee, Mohd Razali and Othman, Md Nazri and P.Nagarajan, Ravin Nair and JOPRI, MOHD HATTA (2013) Digital Implementation of Direct Torque Control of Induction Machines. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Zuber Ahmadi, Muhd Zharif Rifqi and Jidin , Auzani and Othman, Md Nazri and JOPRI, MOHD HATTA and Manap, Mustafa (2013) Improved Performance of Direct Torque Control of Induction Machine utilizing 3-Level Cascade H-Bridge Multilevel Inverter. In: Power Engineering and Optimization Conference (PEOCO), 2013 IEEE 7th International, 3 june 2013, Langkawi Island, Malaysia.

Zulfattah, Z. M and Rafeq, Saleman Abdul and Shukri, Z. M. and Ridhwan, J. and Hanafi, M. H. M and Norain, I and Huzaimi, Z. N. and Najib, A. M. (2013) Gnielinski method in calculating the heat transfer coefficient for metallic solar tower absorber. In: The Malaysian International Tribology Conference 2013, MITC2013, 18 - 20 NOVEMBER 2013, KOTA KINABALU, SABAH. (Unpublished)

Zulikha , Mohamad Akhir (2013) Design Improvement And Analysis Of 4DoF Parallel Robot. Project Report. UTeM, Melaka. (Submitted)

Zulkiffli Fahmi , Ambia (2013) A Study Of AGV Drive Mechanism. Project Report. UTeM, Melaka. (Submitted)

Zurianee, Lokman Loganathan (2013) Preparation And Characterization Of Sol-Gel Derived Hydroxyapatite Coating On Stainless Steel Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Sun Sep 24 14:50:48 2017 MYT.