Items where Year is 2023

Article

A Majid, Huda and Othman, Adib and Al-Fadhali, Najib and Zainal Abidin, Zuhairiah and Shairi, Noor Azwan and Mohd Ibrahim, Imran and Zakaria, Zahriladha and A Rahim, Mohamad Kamal and Esmail, Bashar Ali F (2023) Convertible bandstop to allpass filter using defected ground structure with ideal switch for millimeter-wave band in 5G application. International Journal of Integrated Engineering, 15 (3). pp. 193-198. ISSN 2229-838X

Ab Ghani, Sharin and Ahmad Khiar, Mohd Shahril and Sutan Chairul, Imran and Rahim, Nor Hidayah and Md Arshad@ Hashim, Syahrun Nizam (2023) Effects of parameter adjustment on the electromagnetic field of an overhead power transmission line model. Indonesian Journal Of Electrical Engineering And Computer Science, 30 (2). pp. 643-650. ISSN 2502-4752

Ab Ghani, Sharin and Sutan Chairul, Imran and Ahmad Khiar, Mohd Shahril and Mohd Azlan, Nur Farhana and Mohamad Din, Mohamad Nazri (2023) Investigating the effects of corrosion parameters on the surface resistivity of transformers' insulating paper using a two-level factorial design. International Journal of Applied Power Engineering, 13 (2). pp. 335-342. ISSN 2252-8792

Ab Rahman, Mohd Fauzi and Anuar, Shairazi Akmal and Mohd Nasir, Amal Muaz and Abdul Latiff, Anas and Mohd Rusdi, Muhammad Farid and Wadi Harun, Sulaiman (2023) Self-induced Q-switched fiber laser using tantalum aluminum carbide as a passive modulator. Laser Physics, 33 (12). pp. 1-08. ISSN 1555-6611

Ab Rahman, Mohd Fauzi and Mohd Nasir, Amal Muaz and Anuar, Shairazi Akmal and Abdul Latiff, Anas and Rosol, Ahmad Haziq Aiman and Al-Masoodi, Ahmed Hasan Hamood (2023) Generation of Q-switched erbium-doped fiber laser using MAX phase titanium aluminum nitride Ti4AlN3. Optik, 295 (171488). pp. 1-11. ISSN 0030-4026

Ab. Majid, Mad Helmi and Arshad, Mohd Rizal and Yahya, Mohd Faid and Ibrahim, Abu Bakar (2023) Impact of initialization of a modified particle swarm optimization on cooperative source searching. International Journal of Electrical and Computer Engineering, 14 (1). pp. 218-229. ISSN 2088-8708

Ab.Majid, Mad Helmi and Arshad, Mohd Rizal and Yahya, Mohd Faid (2023) Cooperative source detection using an optimized distributed levy flight algorithm. Jurnal Teknologi, 86 (1). pp. 183-194. ISSN 2180-3722

Abal Abas, Zuraida and Baharuddin, Azhari Samsu and Mukhtar, Mohd Fariduddin and Norizan, Mohd Natashah and Wan Fakhruddin, Wan Farah Wani and Minato, Wakisaka and Abdul Rasib, Amir Hamzah and Zainal Abidin, Zaheera and Abdul Rahman, Ahmad Fadzli Nizam and Hairol Anuar, Siti Haryanti (2023) Integrating local and global information to identify infuential nodes in complex networks. Scientific Reports, 13 (1). pp. 1-12. ISSN 2045-2322

Abd Jalil, Nurul Amira and Che Din, Nazli and Cheryl Yew, Shyh-Qi and Pradeepa, Chandramouli and Putra, Azma and Azeem, Waqar (2023) Investigation of the effectiveness of the chancel availability and geometry of four traditional churches in Malaysia: Simulation experiment. Buildings, 13 (4). pp. 1-13. ISSN 2075-5309

Abd Rahim, Toibah and Amir, Nur Izzah Atira and Mohamad, Noraiham and Adibah Haneem, Mohamad Dom and Omar, Nooririnah and Yusuf, Yusliza and Abu Bakar, Ilyani Akmar and Mohamad Juoi, Jariah (2023) Effect of copper addition on the properties of TiO2 coatings deposited by air plasma spray process. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 82-91. ISSN 2289-7895

Abd Rashid, Mohd Warikh and Mohd Ali Piah, Hidayah and Azlan, Umar Al-Amani and Mohd Hatta, Maziati Akmal and Kasim, Shah Rizal (2023) Influence of ZnO dopant on piezoelectric properties of potassium sodium niobate thin films. Journal of Advanced Research in Applied Mechanics, 111 (1). pp. 153-160. ISSN 2289-7895

Abd Samad, Md Fahmi and Zainuddin, Farah Ayiesya (2023) Single parent mating in genetic algorithm for real robotic system identification. IAES International Journal of Artificial Intelligence, 12 (1). pp. 201-208. ISSN 2252-8938

Abd. Shukur, Muhammad Fadhlullah and Abdul Aziz, Mohd Fareezuan and Shamsuri, Nurrul Asyiqin and Hamsan, Muhamad Hafiz and Mohd Abid, Mohd Asyadi 'Azam and Mohamed Yusof, Yuhanees and Aziz, Shujahadeen B. and Rusdi, Hashlina and Abdul Kadir, Mohd Fakhrul Zamani (2023) An elucidation of symmetric supercapacitor with crustacean-based polymer blend electrolyte. Journal of Applied Polymer Science, 141 (2). pp. 1-12. ISSN 0021-8995

Abdul Hamid, Afifah Maheran and Mohd Nizam, Nur Hazwani Naili and Salehuddin, Fauziyah and Mohd Zain, Anis Suhaila and Zainul Abidin, Noor Faizah and Kaharudin, Khairil Ezwan (2023) Optimization of 14NM double gate Bi-GFET for lower leakage current. TELKOMNIKA Telecommunication Computing Electronics and Control, 21 (1). pp. 195-202. ISSN 1693-6930

Abdul Hamid, Afifah Maheran and Yahaya, Izwanizam and Kaharudin, Khairil Ezwan and Salehuddin, Fauziyah (2023) Taguchi method for p-MOS threshold voltage optimization with a gate length of 22NM. International Journal of Nanoelectronics and Materials, 16 (1). pp. 1-9. ISSN 1985-5761

Abdul Hamid, Rahimah and Abdullah, Lokman and Sindam, Dorestey and Akmal, Suriati and Ito, Tatsuma (2023) Impact of humidity on chemical bonding, porosity and microstructure of 3D printed PLA. Journal of Advanced Manufacturing Technology, 17 (3). pp. 29-40. ISSN 1985-3157

Abdul Kadir, Aida Fazliana and Khatib, Tamer and Hossain, Jahangir and Baharin, Kyairul Azmi and Shareef, Hussain and Hanafi, Ainain Nur and Sulaima, Mohamad Fani (2023) A review on optimal energy management in commercial buildings. Energies, 16 (4). p. 1609. ISSN 1996-1073

Abdul Mutalip, Zaiton and Abdul Rahim, Hazli Rafis and Mohd Isira, Ahmad Sadhiqin and Amir Mohamed, Kamarul and Rihawi, Zeina (2023) Online final examination: Managing academic integrity issues. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 222-234. ISSN 2462-1943

Abdul Shukor, Fairul Azhar and Abdulah, Norrimah and Raja Othman, Raja Nor Firdaus Kashfi and Che Ahmad, Suhairi Rizuan and Mohd Nasir, Nur Ashikin (2023) Modelling methods and structure topology of the switched reluctance synchronous motor type machine: A review. International Journal of Power Electronics and Drive Systems (IJPEDS, 14 (1). pp. 111-122. ISSN 2088-8694

Abdul Shukor, Fairul Azhar and Mohd Nasir, Nur Ashikin and Ahmed Al-Hattami, AAhmed Mohammed Salem and Vaithilingam, Chockalingam Aravind (2023) Performance analysis of wireless power transfer using series-to-series topology. Bulletin of Electrical Engineering and Informatics, 12 (4). pp. 2032-2040. ISSN 2089-3191

Abdullah, Abdul Rahim and Kandaya, Shaarmila and Mohd Saad, Norhashimah and Azman, Izzatul Husna and Shair, Ezreen Farina and Ali, Nur Hasanah (2023) Analysis of early stroke diagnosis based on brain magnetic resonance imaging using machine learning. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 32 (3). pp. 241-255. ISSN 2462-1943

Abdullah, Haslina and Law, Boon Hui C. and Zakaria, Mohamad Shukri (2023) Minimization of machining process sequence based on ant colony algorithm and conventional method. Journal of Engineering Science and Technology, 18 (2). pp. 949-962. ISSN 1823-4690

Abdullah, Lokman and Kamaludin, Khairun Najmi and Syed Salim, Syed Najib and Rafan, Nur Aidawaty and Jamaludin, Zamberi and Rahmat, Mohd Fua'ad and Ramanathan, Rprakash (2023) Triple nonlinear hyperbolic PID with static friction compensation for precise positioning of a servo pneumatic actuator. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 24 (2). pp. 315-336. ISSN 1511-788X

Abdullah, Lokman and Ramanathan, Rprakash and Md Fauadi, Muhammad Hafidz Fazli and Syed Mohamed, Muhammad Syafiq and Kamaludin, Khairun Najmi (2023) A hybrid of Kansei engineering (KE) and analytical hierarchy process (AHP) to develop conceptual designs of portable oil spill skimmer. IIUM ENGINEERING JOURNAL, 24 (1). ISSN 1511-788X

Abdullah, Mohd Firdaus and Md Yusop, Mohd Nizam and Aman, Mohd Salleh and Nazarudin, Mohamad Nizam and Abu Bakar, Abu Yazid and Wan Ibrahim, Nik Rahila and Ismail, Erwan (2023) The influence of knowledge, skills and abilities on the competency of fitness centre managers. International Research Journal of Education and Sciences, 7 (2). pp. 9-20. ISSN 2550-2158

Abdullah, Nor Fadzilah and Gannapathy, Vigneswara Rao and Nordin, Rosdiadee and Abu-Samah, Asma (2023) A smart handover strategy for 5G mmWave dual connectivity networks. IEEE Access, 11. pp. 134739-134759. ISSN 2169-3536

Abdullah, Rohana and Lee, Hui Kean and Abdul Rasib, Amir Hamzah and Mansoor, Hamdan O. (2023) Lean six sigma framework to improve the assembly process at a printer manufacturing company. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 31-46. ISSN 1985-3157

Ahamat, Amiruddin (2023) Online entrepreneurship learning: A case study of a technical public university. International Journal of Technology Enhanced Learning, 15 (2). pp. 105-122. ISSN 1753-5255

Ahmad, Asmala and Abu Sari, Mohd Yazid and Sakidin, Hamzah and Sufahani, Suliadi Firdaus and Mat Amin, Abd Rahman and Rasib, Abd Wahid (2023) Classification of objects within agricultural landscape from high-resolution aerial imagery using maximum likelihood discriminant rules. ARPN Journal Of Engineering And Applied Sciences, 18 (8). pp. 936-948. ISSN 1819-6608

Ahmad, Emy Zairah and Jarimi, Hasila and Mohd Daud, Al Khairi and Razak, Tajul Rosli (2023) Expertise-based systematic guidelines for chiller retrofitting in healthcare facilities. Journal of Building Engineering, 74. pp. 1-15. ISSN 2352-7102

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Mohammad Taha, Mastura and Mustapha, Faizal and Leman, Zulkiflle (2023) A review of natural fiber-based filaments for 3D Printing: Filament fabrication and characterization. Materials, 16 (11). pp. 1-16. ISSN 1996-1944

Ahmad Khiar, Mohd Shahril and Zulkefli, Nur Izyan Husnina and Ab Ghani, Sharin and Sutan Chairul, Imran and Rahim, Nor Hidayah and Ahmad, Asimi Ana (2023) Predicting the ageing time of thin film sacrificial copper strip sensors over a wide range of DBDS concentrations. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (1). pp. 199-211. ISSN 2462-1943

Ahmed Sohoo, Arslan and Che Seman, Fauziahanim and AL-GBURI, AHMED JAMAL ABDULLAH and Ahmad, Hamza and See Khee, Yee and Ishak, Nurul Syafeeqa and Alghamdi, Thamer A. H. and Alathbah, Moath (2023) Exploiting surface plasmon with dielectric coating in copper wires waveguide for the propagation of terahertz waves. COATINGS, 13 (11). pp. 1-16. ISSN 2079-6412

Ajit Kumar, Singh and Santosh, Kumar Mahto and Rashmi, Sinha and Alibakhshikenari, Mohammad and Al Gburi, Ahmed Jamal Abdullah and Ahmad, Ashfaq and Kouhalvandi, Lida and Virdee, Bal S. and Dalarsson, Mariana (2023) Low-loss paper-substrate triple-band-frequency reconfigurable microstrip antenna for Sub-7 GHz applications. Sensors, 23 (21). 01-13. ISSN 1424-8220

Akmal, Suriati and Hambali, Ruzy Haryati and Kamalrudin, Massila and Tormudzi, Umi NurNajeha and Hakimi, Halimatun (2023) Identifying aesthetic quality attributes using Kano model: Case study of Malay women’s office outfit design. International Journal of Sustainable Construction Engineering and Technology, 14 (2). pp. 168-175. ISSN 2180-3242

Al Amin, Mohamed Sultan and Alsuwaidi, Salma Juma Jabr Juma (2023) Strategies and challenges to enhance the impact of e-service quality on institutional excellence: A proposed framework. SRPH Journal Of Applied Management And Agile Organisation, 5. pp. 1-10. ISSN 2717-2163

Al Gburi, Ahmed Jamal Abdullah and Hamdy Elabd, Rania (2023) SAR assessment of miniaturized wideband MIMO antenna structure for millimeter wave 5G smartphones. Microelectronic Engineering, 282. p. 112098. ISSN 0167-9317

Al Gburi, Ahmed Jamal Abdullah and Zakaria, Zahriladha and Ahmed Ghaleb Amer, Abdulrahman and Othman, Nurmiza and Sapuan, Syarfa Zahirah and Alphones, Arokiaswami and Hassan, Mohd Fahrul (2023) Dual-band, wide-angle, and high-capture efficiency metasurface for electromagnetic energy harvesting. Nanomaterials, 13 (13). pp. 1-16. ISSN 2079-4991

Al-Bawri, Samir Salem and Obadi, Ameen and Hossain, Kabir and Abdulhameed, Abdullah and Jusoh, Muzammil and Sabapathy, Thennarasan and El-Din Hussein, Alaa and Al Gburi, Ahmed Jamal Abdullah (2023) High-bandwidth, low-power CMOS transistor based cab for field programmable analog array. Computers, Materials and Continua, 74 (3). 5885 - 5900. ISSN 1546-2218

Al-Shami, Samer Ali Hussein and Al mamun, Abdullah and Abdul Rashid, Nurulizwa and Chew, Boon Cheong (2023) Happiness at workplace on innovative work behaviour and organisation citizenship behaviour through moderating effect of innovative behaviour. Heliyon, 9 (5). pp. 1-12. ISSN 2405-8440

Alghamdi, Thamer A. H. and Mistri, Raj Kumar and Mahto, Santosh Kumar and Al Gburi, Ahmed Jamal Abdullah and Singh, Ajit Kumar and Sinha, Rashmi and Alathbah, Moath (2023) Quad element MIMO antenna for C, X, Ku, and KaBand applications. Sensors, 23 (20). pp. 1-20. ISSN 1424-8220

Alkahari, Mohd Rizal and Azizul Izham, Emalyn Damyra Idza and Hussein, Nur Izan Syahriah and Maidin, Shajahan and Ramli, Faiz Redza (2023) Online monitoring of wire arc additive manufacturing process: A review. Advances In Materials And Processing Technologies. pp. 1-16. ISSN 2374-0698

Anawar, Syarulnaziah and Selamat, Siti Rahayu and Othman, Nur Fadzilah and Harum, Norharyati and Ayop, Zakiah (2023) Security and privacy challenges of big data adoption: A case study in the telecommunications industry. Media matters: Digital society research report, 5. pp. 153-193. ISSN 2289-5248

Anwar Apandi, Nur Ilyana and As’ari, Aziemah Athirah and Muhammad, Nor Aishah and A. Rashid, Rozeha and Sarijari, Mohd Adib and Salleh, Jamaliah (2023) Energy efficiency scheme for relay node placement in heterogeneous networks. Bulletin of Electrical Engineering and Informatics, 12 (1). pp. 187-195. ISSN 2302-9285

Anwar Apandi, Nur Ilyana and Safiee, Rabiatul Adawiyah and Wan, Wing Sheng and Muhammad, Nor Aishah and Sarijari, Mohd Adib (2023) Relay node placement in wireless sensor network for manufacturing industry. Bulletin of Electrical Engineering and Informatics, 12 (1). pp. 158-166. ISSN 2302-9285

Ariffin, Noor Amalina Nisa and Waini, Iskandar and Mohd Kasim, Abdul Rahman and Ahmad Kamal, Mohamad Hidayad and Ilias, Mohd Rijal and Awang Kechil, Seripah (2023) Flow and heat transfer analysis on reiner-philippoff fluid flow over a stretching sheet in the presence of first and second order velocity slip and temperature jump effects. CFD Letters, 15 (1). pp. 88-102. ISSN 2180-1363

Aripin, Muhamad Afzamiman and Mahmud, Murni Fahirah and Junaidi, Nur Hidayah and Noh Seth, Nur Hazirah and Mohamed Sultan, Al Amin (2023) Perspectives of Malaysian academics on the preparation of fourth industrial revolution for construction technology program. International Journal of Evaluation and Research in Education (IJERE), 12 (1). pp. 114-120. ISSN 2252-8822

Arumugam, Nalini and Bakri, Mohammed Hariri and Md Razak, Mohamad Idham and Mello, Geraldine De (2023) The significant role of big data analytics in business: A review case study. International Journal of Business and Social Science, 14 (1). pp. 51-56. ISSN 2219-1933

Azlan, Umar Al-Amani and Abd Rashid, Mohd Warikh and Jalaluddin, Mohamed Lokman (2023) A preliminary study of porous ceramics with carbon black contents. AIMS Materials Science, 10 (5). pp. 741-754. ISSN 2372-0484

Azman, Izzatul Husna and Mohd Saad, Norhashimah and Samsudin, Adam and Kandaya, Shaarmila and Hamzah, Rostam Affendi and Abdullah, Abdul Rahim (2023) Automated cad system for early stroke diagnosis: Review. International Journal of Advanced Computer Science and Applications, 14 (8). pp. 77-83. ISSN 2158-107X

Azmi, Muhamad Zulhairie and Ibrahim, Khairul Anwar and Bahari, Muhamad Falihan and Zainal Abidin, Zaheera and Jenal, Mahyuzie (2023) Enhancement of accessibility and sustainability: A smart solar-powered outdoor laundry drying system. Majlesi Journal of Electrical Engineering, 17 (4). pp. 63-72. ISSN 2345-3796

Azmi, Nur Fatihah and Ismail, Muhammad Hazim and Mokhtar, Nur Hazwani and Ramli, Mizah and Saleman, Abdul Rafeq (2023) Flow simulation study on bed bath for bedridden patient. CFD Letters, 16 (3). pp. 112-124. ISSN 2180-1363

Azmi, Wan Hamzah and Ismail, Mohd. Farid and Mamat, Rizalman and Hafiz Muhammad Ali (2023) Thermal and tribological properties enhancement of PVE lubricant modified with SiO2 and TiO2 nanoparticles additive. Nanomaterials, 13. 01-18. ISSN 2079-4991

Baharom, Mohamad Faizal and Ab Rahman, Mohd Fauzi and Abdul Latiff, Anas and Ahmad, Aminah and Jali, Mohd Hafiz and Wadi Harun, Sulaiman (2023) Passive mode locking erbium-doped fiber laser using V2O5 polyethylene glycol saturable absorber. Indonesian Journal Of Electrical Engineering And Computer Science, 32 (1). pp. 269-275. ISSN 2502-4752

Bakri, Mohammed Hariri and Ismail, Ashari and Rusli, Norsahiat and Abu Bakar, Mohammad Aqmal and Othman, Habibullah (2023) Relationship between service quality and customer satisfaction: A systematic literature review. Res Militaris, 13 (2). pp. 262-281. ISSN 2265-6294

Bakri, Mohammed Hariri and Mat Rasid, Ahmad Mujahid and De Mello, Geraldine John Philip and Ismail, Albert Feisal @ Muhd Feisal and Md Razak, Mohamad Idham (2023) Measurement and structural modelling on factors of islamic payment gateway system among millennial generation in Malaysia. Global Business and Finance Review, 28 (6). pp. 72-94. ISSN 1088-6931

Barkah, Azhari Shouni and Selamat, Siti Rahayu and Zainal Abidin, Zaheera and Wahyudi, Rizki (2023) Impact of data balancing and feature selection on machine learning based network intrusion detection. International Journal On Informatics Visualization, 7 (1). pp. 241-248. ISSN 2549-9610

Che Hasan, Mohd Hanif and Hassan, M. Kabir and Ahmad, Fauzi and Marhaban, Mohammad Hamiruce and S.I. Haris (2023) Development and parameter estimation of a compact electronic wedge brake test rig using grey box system identification. Journal of Mechanical Engineering and Technology (JMET), 15 (2). pp. 1-12. ISSN 2180-1053

Che Ku Mohd, Che Ku Nuraini (2023) Unleashing the pontential: Empowering Artificial Intelligence (AI) with Misty II Robot. TECHIES. pp. 1-3. ISSN 0128-1313

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Sedek, Muliati and Tuan Zakaria, Tuan Norhafizah and Anggrawan, Anthony and Mohd Kasim, Helmi (2023) Unveiling the potential of mixed reality: Opportunities, challenges and future prospects. Journal of Theoretical and Applied Information Technology, 101 (20). pp. 6650-6662. ISSN 1992-8645

Che Nawi, Nur Raihan and Omar, Muhd Khaizer and Sharef, Nurfadhlina Mohd and Azmi Murad, Masrah Azrifah and Mansor, Evi Indriasari and Nasharuddin, Nurul Amelina and Samian, Normalia and Arshad, Noreen Izza and Shahbodin, Faaizah and Marhaban, Mohammad Hamiruce (2023) Correlation between students expectations and demographic characteristics toward features of learning analytics system in Malaysia. International Journal of Academic Research in Progressive Education and Development, 12 (2). pp. 1073-1096. ISSN 2226-6348

Chew, Shin Yi and Mohd Sulaiman, Wirda Syaheera (2023) Covid to beat: Creative intermingling of translingualism in comic if Malaysia was anime: Covidball Z. 3L: Language, Linguistics, Literature, 29 (1). pp. 17-32. ISSN 0128-5157

Dhuchakallaya, Isares and Saechan,, Patcharin and Mohd Sa'at, Fatimah Al Zahrah (2023) Thermal performance improvement of forced-air cooling system combined with liquid spray for densely packed batteries of electric vehicle. Engineered Science, 24. pp. 1-14. ISSN 2576-988X

Doroody, Camellia and Rosly, Hasrul Nisham and Harif, Muhammad Najib and Mohamad, Ili Salwani and Isah, Mustapha and Amin, Nowshad (2023) Optoelectrical properties of treated CdSe thin films with variations in indium chloride concentration. Materials, 16 (11). pp. 1-12. ISSN 1996-1944

Farhi, Faycal and Jeljeli, Riadh and Aburezeq, Ibtehal and Dweikat, Fawzi Fayez and Al-Shami, Samer Ali Hussein and Fayez, Fawzi (2023) Analyzing the students’ views, concerns, and perceived ethics about chat GPT usage. Computers and Education: Artificial Intelligence, 5 (100180). pp. 1-8. ISSN 2666-920X

Gan, Chin Kim and Keek, Joe Siang and Al-Areqi, Khaldon Ahmed Qaid and Tee, Wei Hown and Sardi, Junainah (2023) Sizing of battery energy storage system: A multi-objective optimization approach in DIgSILENT powerfactory. International Journal of Renewable Energy Research, 13 (4). pp. 1604-1613. ISSN 1309-0127

Gan, Chin Kim and Sardi, Junainah and Tee, Wei Hown (2023) Benefits of energy storage systems and its potential applications in Malaysia: A review. Renewable and Sustainable Energy Reviews, 192. pp. 1-24. ISSN 1879-0690

Gan, Chin Kim and Tan, Pi Hua and Qaid, Khaldon Ahmed and Tee, Wei Hown (2023) Modelling and sizing a grid-connected PV-battery system using DIgSILENT for powering UTeM main campus. International Journal of Renewable Energy Research, 13 (3). pp. 1200-1212. ISSN 1309-0127

Gannapathy, Vigneswara Rao and Narayanamurthy, Vigneswaran and Md Isa, Ida Syafiza and Subramaniam, Siva Kumar and Tuani Ibrahim, Ahamed Fayeez and Rajkumar, Sujatha (2023) A mobile and web-based security guard patrolling, monitoring and reporting system to maintain safe and secure environment at premises. International Journal of Interactive Mobile Technologies, 17 (11). pp. 4-14. ISSN 1865-7923

Ghazali, Ihwan and Padzil, Nur Wardah Sufina and Mohamad, Effendi and Al-Mashjari, Layla Ahmed and Irianto, Irianto and Herawan, Safarudin Gazali (2023) The water tap design for ablution activities considering cultural influences: A design for sustainability. Frontiers in Environmental Science, 11. pp. 1-14. ISSN 2296-665X

Haji Azlan, Umar Al-Amani and Jalaluddin, Mohamed Lokman and Abd Rashid, Mohd Warikh (2023) A preliminary study of porous ceramics with carbon black contents. AIMS Materials Science, 10 (5). pp. 741-754. ISSN 2372-0484

Halim, Isa and Mahadzir, Muhammad Nadzirul Izzat and Abdullah, Zulkeflee and Zainal Abidin, Muhammad Zaimi and Muhammad, Mohd Nazrin and Saptari, Adi (2023) A review on ergonomics factors determining working in harmony with exoskeletons. Malaysian Journal of Medicine and Health Sciences, 19 (6). pp. 311-327. ISSN 1675-8544

Hamzah, Khairum and Mohd Nordin, Muhammad Haziq Iqmal and Khashi’ie, Najiyah Safwa and Waini, Iskandar and Khashi’ie, Najiyah Safwa and Nik Long, Nik Mohd Asri and Fitri, Saadatul (2023) Formulation for multiple cracks problem in thermoelectric-bonded materials using hypersingular integral equations. Mathematics, 11 (14). pp. 1-20. ISSN 2227-7390

Hamzah, Khairum and Waini, Iskandar and Mohd Nordin, Muhammad Haziq Iqmal and Nik Long, Nik Mohd Asri and Khashi’ie, Najiyah Safwa and Zainal, Nurul Amira and Sayed Nordin, Sayed Kushairi (2023) Numerical solution for a curvilinear crack phenomenon in thermoelectric bonded materials subjected to mechanical loadings. Journal of Advanced Research in Applied Mechanics, 113 (1). pp. 27-36. ISSN 2289-7895

Hamzah, Rostam Affendi and Zainal Azali, Muhammad Nazmi and Mohd Noh, Zarina and Tengku Wook, Tg Mohd Faisal and Zainal Abidin, Izwan (2023) Stereo matching algorithm using census transform and segment tree for depth estimation. TELKOMNIKA (Telecommunication Computing Electronics And Control), 21 (1). pp. 150-158. ISSN 1693-6930

Haroon, Hazura and Anbalagan, Thanigai and Abdul Rahim, Hazli Rafis and Johari, Siti Halma and Idris, Siti Khadijah and Hanim, Abdul Razak and Kursus Othman, Maisarah (2023) A novel examination of limonene detection using plastic fiber optic sensors and the tapered approach. Bulletin of Electrical Engineering and Informatics, 12 (2). pp. 807-814. ISSN 2089-3191

Haroon, Hazura and Azman, Noor Erina and Idris@Othman, Siti Khadijah and Hanim, Abdul Razak and Mohd Zain, Anis Suhaila and Salehuddin, Fauziyah and Othman, Maisara (2023) Fiber optic sensor based on lateral offset displacement for water quality analysis in agricultural applications. Przeglad Elektrotechniczny, 99 (7). pp. 253-256. ISSN 0033-2097

Harum, Norharyati and Khalil, Mohamad Kchouri and Hazimeh, Hussein and Obeid, Ali (2023) Smart fall detection by enhanced SVM with fuzzy logic membership function. Journal of Universal Computer Science, 29 (9). pp. 1010-1032. ISSN 0948-6968

Hashim, Hanizam and Salleh, Mohd Shukor and Marjom, Zolkarnain and Boejang, Hambali and Sundi @ Suandi, Syahrul Azwan and Abdul Rasib, Amir Hamzah and Sulong, Abu Bakar and Omar, Mohd Zaidi (2023) Effect of heat treatment cycles on tensile performance and microstructural evolution of thixoformed MWCNT-A356 composite. Journal Of Engineering Science And Technology, 18 (2). pp. 1323-1338. ISSN 1823-4690

Hashim, Nik Mohd Zarifie and Ahmad Azhar, Nur Syahmina and Kamaruddin, Afiqah Iylia and Zahri, Nik Adilah Hanin and Sulistiyo, Mahmud Dwi (2023) Vowel’s classification for stroke patients through rehabilitation performance via image-profiled sound data. ARPN Journal Of Engineering And Applied Sciences, 18 (12). pp. 1411-1424. ISSN 1819-6608

Hashim, Norlezah and Ng, Wen Jun and Norddin, Nur Bahirah and Idris, Fakrulradzi and Md Isa, Ida Syafiza (2023) Crane monitoring system based on internet of things using long range. International Journal Of Electrical And Computer Engineering (IJECE), 13 (2). pp. 2223-2232. ISSN 2088-8708

Hasim, Nur Aiman Hanis and Azmi, Ezzatul Farhain and Mohd Zabidi, Muhammad Izzat Zakwan and Mohd. Zabidi, Muhammad Izzat Zakwan and Sanusi, Nortazi (2023) LPG gas leaking detector using arduino for household application. ARPN Journal Of Engineering And Applied Sciences, 18 (5). pp. 487-490. ISSN 1819-6608

Hossain, Jahangir and Saeed, Nagham and Abdul Kadir, Aida Fazliana and Shareef, Hussain and Manojkumar, Rampelli and Hanafi, Ainain Nur (2023) A grid-connected optimal hybrid PV-BES System sizing for Malaysian Commercial Buildings. Sustainability (Switzerland), 15 (13). pp. 1-20. ISSN 2071-1050

Husain, Mohd Husharilamri and Ahmad, Fauzi and Che Hasan, Mohd Hanif (2023) Adaptive PID based speed tracking control of DC motor. Journal of Mechanical Engineering and Technology, 15 (2). pp. 13-26. ISSN 2180-1053

Hussein, Nur Izan Syahriah and Ayof, Mohd Nizam and Zainuddin, Muhammad Syakir and Jongkol, Srithorn (2023) Design of a low vibration grinding jig and fixture for pipe beveling prior to welding. Journal of Advanced Manufacturing Technology (JAMT), 17 (2). pp. 57-70. ISSN 1985-3157

Ibrahim, Khairul Anwar and Masdzarif, Nur Diana Izzani and Gan, Chin Kim and Mau, Teng Au and Baharin, Kyairul Azmi and Emran, Nurul Akmar and Zainal Abidin, Zaheera (2023) An efficient method for estimating energy losses in distribution's feeder. Bulletin of Electrical Engineering and Informatics, 12 (4). pp. 1919-1928. ISSN 2089-3191

Ibrahim, Muhammad Shafiq and Kamat, Seri Rahayu and Shamsuddin, Syamimi (2023) Computer-based decision support system (DSS) application in transportation sector: A review. International Journal of Social Science Research, 5 (2). pp. 72-86. ISSN 2710-6276

Ibrahim, Muhammad Shafiq and Kamat, Seri Rahayu and Shamsuddin, Syamimi (2023) The application of driving fatigue detection and monitoring technologies in transportation sector: A review. International Journal of Technology Management and Information System, 5 (2). pp. 30-42. ISSN 2710-6268

Idris, Fakrulradzi and Buntat, Muhammad Amirul and Abdul Latiff, Anas and Lecthmanan, Yogeswaran and Berahim, Zulkarami (2023) IoT-based fertigation system for agriculture. Bulletin of Electrical Engineering and Informatics, 13 (3). pp. 1574-1581. ISSN 2302-9285

Ishak, Anuar and Alabdulhadi, Sumayyah and Abu Bakar, Sakhinah and Waini, Iskandar and Ahmed, Sameh E. (2023) Effect of buoyancy force on an unsteady thin film flow of Al2O3/water nanofluid over an inclined stretching sheet. Mathematics, 11 (3). pp. 1-16. ISSN 2227-7390

Ishak, Anuar and Alabdulhadi, Sumayyah and Waini, Iskandar and E. Ahmed, Sameh (2023) Non-unique solutions of magnetohydrodynamic stagnation flow of a nanofluid towards a shrinking sheet using the solar radiation effect. Micromachines, 14 (3). pp. 1-15. ISSN 2072-666X

Ishak, Anuar and Sohut, Farizza Haniem and Khan, Umair and Soid, Siti Khuzaimah and Waini, Iskandar (2023) Mixed convection hybrid nanofluid flow induced by an inclined cylinder with lorentz forces. Micromachines, 14 (5). pp. 1-22. ISSN 2072-666X

Ismail, Mazida and Mohamad, Norhidayah and Ahamat, Amiruddin (2023) Learning orientation as mediator between international entrepreneurial orientation and international firm performance in global halal industry. Global Journal Al-Thaqafah, SI. pp. 53-64. ISSN 2232-0474

Ismail, Mazida and Mohamad, Norhidayah and Ahamat, Amiruddin (2023) Managerial capabilities, learning orientation and performance of international halal industry using upper echelon theory. International Journal of Business and Society, 24 (1). pp. 119-140. ISSN 1511-6670

Ismail, Nurhidayah and De Rooij, Matthijn B. and Schipper, Dirk Jan and Mohd Zini, Nurul Hilwa (2023) Experimental study of contact angle and surface energy of a single aramid fibre and its relation on frictional behaviour of fibre-fibre contact. Jurnal Tribologi, 36. pp. 43-56. ISSN 2289-7232

Jabar, Juhaini and Hasim, Mohamad Aidil and Sufian, Atirah and Ibrahim, Nor Fauziana and Abdul Khalid, Fararisha (2023) Employing fuzzy Delphi techniques to validate the components and contents of e-learning antecedents and usage behavior towards e-learning performance. European Journal of Educational Research, 12 (1). pp. 467-480. ISSN 2165-8714

Jamaludin, Amirul and Norhidayah, Mohamad Yatim and Mohd Noh, Zarina (2023) The effect of artificial neural network towards the number of particles of Rao-Blackwellized particle filter using laser distance sensor. International Journal of Advanced Computer Science and Applications, 14 (1). pp. 691-700. ISSN 2158-107X

Jamil Alsayaydeh, Jamil Abedalrahim and Al Gburi, Ahmed Jamal Abdullah and Irianto and Herawan, Safarudin Gazali (2023) Improving application support in 6G networks with CAPOM: Confluence-aided process organization method. IEEE Access, 11. pp. 99426-99437. ISSN 2169-3536

Jamil Alsayaydeh, Jamil Abedalrahim and Mohammad Alshannaq, Osama Saleh and Mohammad Nawafleh, Mohammad Mahmoud and Mohammad Nawafleh, Odai Yassin and Baharon, Mohd Rizuan and Baharudin, Zikri Abadi and Zainon, Maslan and Aziz, Azwan (2023) An analysis of lowest energy consumption (CPU time) through running several cryptography algorithms with different video formats. ARPN Journal of Engineering and Applied Sciences, 18 (16). pp. 1915-1922. ISSN 1819-6608

Jamil Alsayaydeh, Jamil Abedalrahim and Yusof, Mohd Faizal and Abdul Halim, Muhammad Zulhakim and Zainudin, Muhammad Noorazlan Shah and Herawan, Safarudin Gazali (2023) Patient health monitoring system development using ESP8266 and Arduino with IoT platform. International Journal Of Advanced Computer Science And Applications(Ijacsa),Volume 9 Issue 6,2018., 14 (4). pp. 617-624. ISSN 2158-107X

Jamil Alsayaydeh, Jamil Abedalrahim and Yusof, Mohd Faizal and Salmi, Muhammad Asyraf and Wong, Adam Yoon Khang and Herawan, Safarudin Gazali (2023) Fertigation technology meets online market: A multipurpose mobile app for urban farming. International Journal of Advanced Computer Science and Applications, 14 (6). pp. 806-813. ISSN 2158-107X

Jidin, Aiman Zakwan and Hussin, Razaidi and Lee, Weng Fook and Mispan, Mohd Syafiq and Zakaria, Nor Azura and Loh, Wan Ying and Zamin, Norshuhani (2023) Generation of new low-complexity March algorithms for optimum faults detection in SRAM. IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, 42 (8). pp. 2738-2751. ISSN 0278-0070

Jilani, Mohammed Ghulam and Mohd Aboobaider, Burhanuddin and Dawood, Faten Abed Ali and Al-yousif, Shahad Nidhal and Alkhayyat, Ahmed and Ali, Mohammed Hasan and Malik, Rami Qays and Jaber, Mustafa Musa (2023) An empirical study on the affecting factors of cloud-based ERP system adoption in Iraqi SMEs. International Journal of Advanced Computer Science and Applications, 14 (1). pp. 430-441. ISSN 2158-107X

Joyce, Yew Pei Ling and Hasanudin, Afif Hakim and Abdul Mutalip, Zaiton (2023) Performance evaluation of carrier-less amplitude phase modulation scheme for indoor visible light communication system. Optoelectronics and Advanced Materials, Rapid Communications, 17 (1-2). pp. 51-60. ISSN 1842-6573

Jumaidin, Ridhwan and SHAFIE, SYAHMAH and Ahmad Ilyas, Rushdan and Muchlis, - (2023) EFFECT OF COCONUT FIBER LOADING ON THE ORPHOLOGICAL, THERMAL, AND MECHANICAL PROPERTIES OF COCONUT FIBER REINFORCED THERMOPLASTIC STARCH/BEESWAX COMPOSITES. PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 31 ((S1)). pp. 157-173. ISSN 0128-7680

Kadirgama, Kumaran and Zurghiba, Hizanorhuda and Sazali, Norazlianie and Mat Noor, Muhamad and Abu Bakar, Rosli and Subramonian, Sivarao and Yusaf, Talal and Chong, Tak Yaw and Koh, Siaw Paw and Tiong, Sieh Kiong and Benedict, Foo (2023) Enhancing heat transfer in compact automotive engines using hybrid nano coolants. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 32 (2). pp. 314-326. ISSN 2462-1943

Kamalrudin, Massila (2023) MBOT News: WTC Red LIPS Mentorship Program. TECHIES, 21. p. 8. ISSN 0128-1313

Kamaruddin, Zatil Hafila and Jumaidin, Ridhwan and Muhammad Asyraf, Muhammad Rizal and Kamaruddin, Zatil Hazrati and Razman, Muhammad Rizal and Khan, Tabrej (2023) Effect of cymbopogan citratus fibre on physical and impact properties of thermoplastic cassava starch/palm wax composites. Polymers, 15 (10). p. 2364. ISSN 2073-4360

Kamarudin, Muhammad Nizam and Md. Rozali, Sahazati and Hairi, Mohd Hendra and Zakaria, Muhammad Iqbal (2023) Brief note on match and miss-match uncertainties. TELKOMNIKA (Telecommunication Computing Electronics And Control), 21 (5). pp. 1156-1162. ISSN 1693-6930

Kamat, Seri Rahayu and Ibrahim, Muhammad Shafiq and Shamsuddin, Syamimi (2023) The role of brain wave activity by electroencephalogram (EEG) in assessing cognitive skills as an indicator for driving fatigue: A review. Malaysian Journal on Composites Science and Manufacturing, 11 (1). pp. 19-31. ISSN 2716-6945

Kamat, Seri Rahayu and Ibrahim, Muhammad Shafiq and Shamsuddin, Syamimi and Md Isa, Mohd Hafzi and Fukumi, Minoru (2023) Regression analysis of oxygen saturation level for critical driving fatigue factors using Box-Behnken design. Journal of Advanced Manufacturing Technology, 17 (3). pp. 69-81. ISSN 1985-3157

Karis, Mohd Safirin and Kasdirin, Hyreil Anuar and Abas, Norafizah and Mohd Saad, Wira Hidayat and Zainudin, Muhammad Noorazlan Shah and Mohd Ali, Nursabillilah and Mohd Aras, Mohd Shahrieel (2023) Analysis of ANN and fuzzy logic dynamic modelling to control the wrist exoskeleton. Journal of Robotics and Control (JRC), 4 (4). pp. 572-583. ISSN 2715-5072

Karis, Mohd Safirin and Kasdirin, Hyreil Anuar and Abas, Norafizah and Zainudin, Muhammad Noorazlan Shah and Muhammad, Sufri and Mior Fadzil, Mior Muhammad Nazmi Firdaus (2023) Dynamic modelling of hand grasping and wrist exoskeleton: An EMG-based approach. International Journal of Advanced Computer Science and Applications, 14 (8). pp. 493-499. ISSN 2158-107X

Karmagatri, Mulyani and Aziz, Clarisa Fezia Amanda and Asih, Wini Rizki Purnama and Jumbri, Isma Addi (2023) Uncovering user perceptions toward digital banks in Indonesia: A Naïve Bayes sentiment analysis of twitter data. Journal of Theoretical and Applied Information Technology, 101 (12). pp. 4960-4968. ISSN 1992-8645

Khamis, Aziah and Omar Fauzi, Muhammad Hafiz Aiman and Wan Abd Rahim, Wan Mohd Faizal and Chu, Yee Khor (2023) Charging strategy in electric vehicle chargers by utilizing demand side management scheme. Electric Power Systems Research, 220. pp. 1-11. ISSN 0378-7796

Khan, Umair and Zaib, Aurang and Ishak, Anuar and Waini, Iskandar and M. Sherif, El-Sayed and Baleanu, Dumitru (2023) Stability scrutinization of Agrawal axisymmetric flow of nanofluid through a permeable moving disk due to renewable solar radiation with Smoluchowski temperature and Maxwell velocity slip boundary conditions. CMES - Computer Modeling in Engineering and Sciences, 134 (2). pp. 1371-1392. ISSN 1526-1492

Khashi’ie, Najiyah Safwa and Hamzah, Khairum and Waini, Iskandar and Zainal, Nurul Amira and Sayed Kushairi, Sayed Nordin and Mohd Kasim, Abdul Rahman and Pop, Ioan (2023) Response surface methodology of the unsteady axisymmetric magnetic hybrid nanofluid flow subject to a shrinking disk. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 137-148. ISSN 2289-7895

Khashi’ie, Najiyah Safwa and Waini, Iskandar and Zainal, Nurul Amira and Hamzah, Khairum and Arifin, Norihan Md and Pop, Ioan Mihai (2023) Multiple solutions and stability analysis of magnetic hybrid nanofluid flow over a rotating disk with heat generation. Symmetry, 102 (1). pp. 59-72. ISSN 2073-8994

Khashi’ie, Najiyah Safwa and Waini, Iskandar and Zainal, Nurul Amira and Hamzah, Khairum and Md Arifin, Norihan and Pop, Ioan (2023) Multiple solutions and stability analysis of magnetic hybrid nanofluid flow over a rotating disk with heat generation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 102 (1). pp. 59-72. ISSN 2289-7879

Koe, Wei Loon and Krishnan, Ramesh and Ahmad, Nur Azreen Farihah and Alias, Nurul Ezaili and Othman, Rozana and Kanchymalay, Kasturi (2023) The relationship between person-job fit, employee engagement and turnover intention: A proposed framework. Information Management and Business Review, 15 (4). pp. 214-218. ISSN 2220-3796

Lau, Kok Tee and Mohammad Taha, Mastura and Abdul Kudus, Syahibudil Ikhwan and Chung, See Ern (2023) Effect of print bed's heat flow on curling and surface roughness of FDM-printed abs sample. Jurnal Teknologi, 85 (2). pp. 211-222. ISSN 2180-3722

Liew, Pay Jun and Othman, Intan Sharhida and Tee, Chee Yin and Chang, Siang Yee and Raja Abdullah, Raja Izamshah and Wang, Jingsi (2023) Electrical discharge coating of mild steel with fly ash suspension. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 1-9. ISSN 2289-7895

Loh, Ser Lee and Keek,, Joe Siang and Hanafi, Ainain Nur and Cheong, Tau Han (2023) Pre-slippage detection and counter-slippage for e-pattern omniwheeled cellular conveyor. Bulletin of Electrical Engineering and Informatics, 13 (4). pp. 2298-2309. ISSN 2302-9285

Luga Martin Simbolon and Kasni Sumeru and Triaji Pangripto Pramudantoro and Apip Badarudin and Ridwan Nugraha and Sukri, Mohamad Firdaus (2023) Kaji eksperimental retrofit R404A dengan refrigeran ramah lingkungan R290 pada freezer. Jurnal Teknologi Terapan, 9 (2). pp. 148-155. ISSN 2549-1938

MOGAN, KHUGANESHWARAN and Jumaidin, Ridhwan and Ahmad Ilyas, Rushdan and Kamaruddin, Zatil Hafila (2023) Environmental properties of coconut fiber/reinforced thermoplastic starch/beeswax hybrid composites. PERTANIKA JOURNAL OF SCIENCE AND TECHNOLOGY, 31 ((S1)). pp. 21-38. ISSN 0128-7680

Ma, Yuaner and Jabar, Juhaini (2023) Online recommendation method of Malaysian medical tourism products based on collaborative filtering algorithm. Journal of Logistics, Informatics and Service Science, 10 (2). pp. 79-90. ISSN 2409-2665

Ma, Yuaner and Jabar, Juhaini and Abdul Aziz, Nor Azah (2023) Feature selection with integrated Gaussian seahorse optimization data mining for cross-border business cooperation between the Malaysian medical industry and tourism industry. International Journal on Recent and Innovation Trends in Computing and Communication, 11 (6). pp. 380-387. ISSN 2321-8169

Maidin, Shajahan and Rajendran, Thavinnesh Kumar and Ismail, Shafinaz and Mohd Ali, Latifah (2023) Systematic literature review on the application of additive manufacturing in repair and restoration. Jurnal Teknologi, 85 (6). pp. 85-94. ISSN 2180-3722

Maidin, Shajahan and Rajendran, Thavinnesh Kumar and Md Nor Hayati, Norilani and Yap, Yeong Sheng and Ismail, Shafinaz and Muhammad, Ahmad Hilmi (2023) Effect of ultrasonic vibration on the mechanical properties of 3D printed acrylonitrile butadiene styrene and polylactic acid samples. Heliyon, 9 (6). pp. 1-17. ISSN 2405-8440

Makmur and Mohamad, Norhidayah (2023) The effect of entrepreneurial marketing on village-owned enterprises performance distribution. Journal of Distribution Science, 21 (9). pp. 55-66. ISSN 1738-3110

Mamat, Mohamad Hafiz and Kamaruzaman, Dayana and A Subki, A Shamsul Rahimi and Kamal Ariffin, Nurul Izzati and Megat Zulkifli, Megat Danial Aizat and Mohamed Mustakim, Nurul Syafiqah and Parimon, Norfarariyanti and Yaakob, Muhammad Kamil and Malek, Mohd Firdaus and Vasimalai, Nagamalai and Abdullah, Mohd Hanapiah and Md Sin, Nor Diyana and Abu Bakar, Suriani and Ahmad, Mohd Khairul (2023) Nanosheet zinc oxide synthesized by solution-immersion method for triboelectric nanogenerator. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 88-98. ISSN 2462-1943

Mamat, Mohamad Hafiz and Mohamed Zahidi, Musa and A Subki, A Shamsul Rahimi and Abdullah, Mohd Hanapiah and Hassan, Hamizura and Ahmad, Mohd Khairul and Abu Bakar, Suriani and Mohamed, Azmi and Ohtani, Bunsho (2023) Formation of a nanorod-assembled TiO2 actinomorphic-flower-like microsphere film via ta doping using a facile solution immersion method for humidity sensing. Nanomaterials, 13 (2). p. 256. ISSN 2079-4991

Mansor, Nuratiqa Natrah and Jamaluddin, Muhammad Herman and Shukor, Ahmad Zaki and Abdul Razib, Syaiful Asyraf (2023) Development of portable wireless parking sensor device. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 30 (3). pp. 9-15. ISSN 2462-1943

Maslan, Mohd Nazmin and Saidin, Iqbal Afiq and Abdullah, Lokman and Yakub, Fitri (2023) Evaluation and comparison of the tracking performance between NPID Icond controller, NPID controller, and PID controller. Journal Of Engineering Science And Technology, 18 (1). pp. 624-635. ISSN 1823-4690

Mat Dan, Reduan and Putra, Azma and Yahya, M. Farid and Samsubaha, Muhammad Fadzlee and Rashid, Zaini (2023) Study of axial vibration of a motor-compressor system using operational modal analysis. Sound and Vibration, 57 (1). pp. 119-131. ISSN 1541-0161

Maylawati, Dian Sa’adillah and Jaya Kumar, Yogan and Kasmin, Fauziah (2023) Feature-based approach and sequential pattern mining to enhance quality of Indonesian automatic text summarization. Indonesian Journal Of Electrical Engineering And Computer Science, 30 (3). pp. 1795-1804. ISSN 2502-4752

Mazlan, Idayati and Abdullah, Noraswaliza and Ahmad, Norashikin (2023) Exploring the impact of hybrid recommender systems on personalized mental health recommendations. International Journal of Advanced Computer Science and Applications, 14 (6). pp. 935-944. ISSN 2158-107X

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Md Fauadi, Muhammad Hafidz Fazli and Razak, Zakaria and K.J. Khadim (2023) Optimization of injection moulding parameters in reducing cavity pressure using Taguchi method. Journal of Advanced Manufacturing Technology (JAMT), 17 (2). pp. 31-42. ISSN 1985-3157

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Salleh, Mohd Shukor and Abdullah, Muhammad Ilman Hakimi Chua and Subramonian, Sivarao and Yamaguchi, Masayuki (2023) Optimization of compression moulding parameters on mechanical properties of stainless steel 316L. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 47-58. ISSN 1985-3157

Md Arifin, Norihan and Khashi’ie, Najiyah Safwa and Wahid, Nur Syahirah and Pop, Ioan (2023) Insight into unsteady separated stagnation point flow of hybrid nanofluids subjected to an electro-magnetohydrodynamics Riga plate. Magnetochemistry, 9 (2). p. 46. ISSN 2312-7481

Md Ghazaly, Mariam and Kueh, Tze Jun (2023) Generative design of a 6-axis quadcopter drone for weight optimization. International Journal of Integrated Engineering, 14 (4). pp. 100-111. ISSN 2229-838X

Md Saat, Mohd Shakir and Husin, Siti Huzaimah and Yusop, Yusmarnita and Awal, Md Rabiul and Mohd Shapri, Ahmad Husni (2023) The design of inductive power transfer system for fish aquarium using class-e inverter and LCCL impedance matching. International Journal of Power Electronics and Drive Systems (IJPEDS, 14 (2). pp. 882-891. ISSN 2088-8694

Mello, Geraldine De and Md Razak, Mohamad Idham and Arumugam, Nalini and Bakri, Mohammed Hariri (2023) Feasibility and acceptability of digital student activity book (SAB) among primary schools in Selangor. International Journal of Business and Social Science, 14 (4). pp. 71-77. ISSN 2219-1933

Menon, P. Susthitha and Mohamad, Najmiah Radiah and Jamil, Nur Akmar and Mohd Razip Wee, Mohd Farhanulhakim and Mohamed, Mohd Ambri and Hamzah, Azrul Azlan and Mohd Abid, Mohd Asyadi 'Azam (2023) Deposition of polypyrrole-carboxylated multi-walled carbon nanotube nanohybrid thin film for surface plasmon resonance sensor. International Journal of Nanoelectronics and Materials, 16 (SI). pp. 305-315. ISSN 1985-5761

Mohamad, Effendi and Adiyanto, Okka and Jaafar, Roshidah and Muhammad Faishal and Irianto and Rasyid, Muhammad Izzudin (2023) Optimization of pet particle-reinforced epoxy resin composite for eco-brick application using the response surface methodology. Sustainability (Switzerland), 15 (5). pp. 1-21. ISSN 2071-1050

Mohamad, Effendi and Jaafar, Roshidah and Faishal, Muhammad and Adiyanto, Okka (2023) Life cycle assessment of eco-brick production using pet particle reinforced epoxy resin composites. Multidisciplinary Science Journal, 5 (3). pp. 1-10. ISSN 2675-1240

Mohamad, Mas Haslinda and Zamri, Nurusolihah and Ibrahim, Nor Khairiah (2023) Wavelet-based sensing technique in cognitive radio network. TELKOMNIKA (Telecommunication Computing Electronics And Control), 21 (5). pp. 968-974. ISSN 1693-6930

Mohamad Daud, Nor Farah Naquiah and Abdullah, Muhammad Haziq Lim and Zakaria, Mohd Hafiz (2023) Serious game design principles for children with autism to facilitate the development of emotion regulation. International Journal Of Advanced Computer Science And Applications (IJACSA), 14 (5). pp. 961-972. ISSN 2158-107X

Mohammed, Naba Jasim and Norinsan, Kamil Othman and Al Gburi, Ahmed Jamal Abdullah and M. Yusop, Rahimi (2023) Date palm seed extract for mild steel corrosion prevention in HCL medium. Separations, 10 (1). pp. 1-21. ISSN 2297-8739

Mohammed Naser, Hussein and Al-Ani, Oras Ahmed and Farhan Mosleh, Mahmood and Arith, Faiz (2023) Umbrella-shaped wideband MIMO wireless communication antenna. Journal of Techniques, 5 (4). pp. 46-53. ISSN 2708-8383

Mohd Ab Halim, Mohd Firdaus and Sulaiman, Erwan and Ab Rahman, Azhan (2023) Investigation of the cogging factor of CMG and RPMG for several pole pair combinations. El-Cezeri Journal of Science and Engineering, 10 (2). pp. 222-230. ISSN 2148-3736

Mohd Ali, Nursabillilah and Besar, Rosli and Ab Aziz, Nor Azlina (2023) A case study of microarray breast cancer classification using machine learning algorithms with grid search cross validation. Bulletin of Electrical Engineering and Informatics, 12 (2). pp. 1047-1054. ISSN 2302-9285

Mohd Azman, Nurul Izzati Akmal and Ismail, Nur Syakimah and Abdul Halim, Nur Hamidah and Juhari, Nurjuliana and Abd Rahim, Toibah and Sabani, Norhayati and Shamsudin, Siti Aisyah and Tamiya, Eiichi (2023) Optimization of gold nanoparticles electrodeposition duration on screen printed electrode to enhance electrochemiluminescence of nitrogen-doped carbon dots. International Journal of Nanoelectronics and Materials, 16. pp. 131-141. ISSN 1985-5761

Mohd Basri, Mohd Ariffanan and Noordin, Aminurrashid and Mohamed, Zaharuddin (2023) Adaptive PID control via sliding mode for position tracking of quadrotor MAV: Simulation and real-time experiment evaluation. Aerospace, 10 (6). pp. 1-25. ISSN 2226-4310

Mohd Chachuli, Siti Amaniah and Noor, Muhammad Luqman Hakkim and Coban, Omer and Shamsudin, Nur Hazahsha and Idris, Muhammad Idzdihar (2023) Characteristic of graphene-based thick film gas sensor for ethanol and acetone vapor detection at room temperature. Indonesian Journal Of Electrical Engineering And Computer Science, 32 (3). pp. 1384-1391. ISSN 2502-4752

Mohd Esa, Mona Riza and Bahari, Noraishah and Mohammad, Sulaiman Ali and Ahmad, Mohd Riduan and Ahmad, Noor Azlinda and Abdul Malek, Zulkurnain (2023) Analysis of lightning flash rate with the occurrence of flash floods and hailstorms in Peninsular Malaysia. Journal of Atmospheric and Solar-Terrestrial Physics, 250. pp. 1-13. ISSN 1364-6826

Mohd Ibrahim, Imran and Mohd Yasin, Mohd Najib and Ismail, Arif Mawardi and Osman, Mohamed Nasrun and Noor, Shehab Khan and Abd Rahman, Nur Akmal and Ismail, Shaiful Bakri (2023) A low-profile dielectric resonator antenna array for OAM waves generation at 5G NR bands. Micromachines, 14 (4). pp. 1-12. ISSN 2072-666X

Mohd Kasim, Abdul Rahman and Aljabali, Ahlam and Khashi’ie, Najiyah Safwa and Waini, Iskandar and Ariffin, Noor Amalina Nisa (2023) Eyring-powell hybrid nanofluid with radiative heat flux: case over a shrinking sheet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (1). pp. 109-121. ISSN 2289-7879

Mohd Kasim, Abdul Rahman and Mokhtar, Masyfu’ah and Nordin, Nur Syahidah and Waini, Iskandar (2023) Flow and heat transfer of Williamson hybrid ferrofluid with combined convective transport. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 95-112. ISSN 2289-7879

Mohd Kasim, Abdul Rahman and Mokhtar, Masyfu’ah and Waini, Iskandar and Nordin, Nur Syahidah and Sakidin, Hamzah and Al Sukri and Adytia, Didit (2023) Combined convective transport of Williamson hybrid nanofluid over a shrinking sheet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 110 (2). pp. 219-235. ISSN 2289-7879

Mohd Kasim, Abdul Rahman and Nordin, Nur Syahidah and Mohammed Al-Sharifi, Hussein Ali and Waini, Iskandar and Mokhtar, Masyfu’ah and Romli, Mohd Fakhizan and Samsudin, Dafrizal and Adytia, Didit (2023) Mathematical model of Reiner-Philippoff embedded with Al2O3 and Cu particles over a shrinking sheet with mixed convection and mass flux effect. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (2). pp. 195-213. ISSN 2289-7879

Mohd Kasim, Noor Shahida and Ab Rashid, Siti Rosmaniza and Muhammad Fikri, Shamsuddin and Abdul Samad, Ahmad Fithri (2023) Smart route management for bin truck. Przeglad Elektrotechniczny, 99 (3). pp. 222-226. ISSN 0033-2097

Mohd Nasir, Haslinah and Brahin, Noor Mohd Ariff and Mohd Sani, Farees Ezwan and Mispan, Mohd Syafiq and Abd Wahab, Nur Haliza (2023) AI educational mobile app using deep learning approach. International Journal On Informatics Visualization, 7 (3). pp. 952-958. ISSN 2549-9610

Mohd Nasir, Haslinah and Brahin, Noor Mohd Ariff and Zainuddin, Suraya and Mispan, Mohd Syafiq and Md Isa, Ida Syafiza and Sha’abani, Mohd Nurul Al Hafiz (2023) The comparative study of deep learning neural network approaches for breast cancer diagnosis. International Journal Of Online And Biomedical Engineering, 19 (6). pp. 127-140. ISSN 2626-8493

Mohd Noh, Zarina and Ismail, Nurfarah Izzati and Mohamad Yatim, Norhidayah (2023) Development of an IoT-based hand gesture monitoring system for disabled person using flex sensor. Journal of Engineering and Technology, 14. pp. 259-271. ISSN 2180-3811

Mohd Rosli, Mohd Afzanizam and Chia, Zhi Horng and Ponnaiyan, Jayaprakash and Salimen, Nurfarhana and Herawan, Safarudin Ghazali and Hussain, Faridah (2023) Performance evaluation of photovoltaic integrated organic phase change material in a single container using indoor solar simulator. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 168-183. ISSN 2289-7879

Mohd Rosli, Mohd Afzanizam and Permanasari, Avita Ayu and Puspitasari, Poppy and Sukarni Sukarni and Habibi, Ilham Akbar and Muhamed Rafaizul, Nurul Izzati Akmal and Herawan, Safarudin Gazali (2023) Efficiency of a photovoltaic thermal (PVT) system using bio-nanofluid based on virgin coconut oil-graphene with additive surfactant: An experimental study. Journal of Advanced Research in Applied Sciences and Engineering Technology, 34 (2). pp. 287-304. ISSN 2462-1943

Mohd Rosli, Mohd Afzanizam and Salimen, Nurfarhana and Akmal Muhamed Rafaizul, Nurul Izzati and Misha, Suhaimi and Abdullah, Norli and Herawan, Safarudin Gazali and Permanasari, Avita Ayu and Hussain, Faridah (2023) Parametric study of photovoltaic system integrated with organic phase change material using ANSYS. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 106 (1). pp. 76-89. ISSN 2289-7879

Mohd Rosli, Mohd Afzanizam and Sam, Yih Herng and Salimen, Nurfahana and Herawan, Safarudin Ghazali and Hussain, Faridah (2023) Performance evaluation of photovoltaic thermal using MgO nanofluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 109 (2). pp. 184-209. ISSN 2289-7879

Mohd Rus, Anika Zafiah and Ahmed, Maznah Lliyas and Saif, Yazid and Yusof, Yusri and Al-Alimi, Sami and Didane, Djamal Hissein and Chi Adam, Mohd Khairil Anbia and Yeong, Hyeon Gu and Al-masni, Mohammed A. and Abdulrab, Hakim Qaid Abdullah (2023) Advancements in roundness measurement parts for industrial automation using Internet of Things architecture-based computer vision and image processing techniques. Applied Sciences, 13 (20). pp. 1-22. ISSN 2076-3417

Mohd Saad, Norhashimah and Omar, Siti Nashayu and Abdullah, Abdul Rahim and Shair, Ezreen Farina and H.Rashid (2023) A review of classification techniques for electromyography signals. Asian Journal of Medical Technology, 3 (1). pp. 47-64. ISSN 2682-9177

Mohd Saad, Wira Hidayat and Saipullah, Khairul Muzzammil and Idris, Muhammad Idzdihar and Mohamed Salleh, Muhammad Zulhusni and Wong, Qi Lun and Abd Razak, Muhd Shah Jehan (2023) Dataset of bird's eye chilies farm for stereo image semantic segmentation. Data in Brief, 51. pp. 1-7. ISSN 2352-3409

Mohd Shah, Hairol Nizam and Mohammed Naji, Osamah Abdullah Ahmed and Sulaiman, Marizan and Johan, Nurul Fatiha (2023) Weld seam feature point extraction using laser and vision sensor. International Journal of Advanced Manufacturing Technology, 127. pp. 5155-5170. ISSN 0268-3768

Mohd Shah, Hairol Nizam and Nik Anwar, Nik Syahrim and Mohammed Naji, Osamah Abdullah Ahmed and Johan, Nurul Fatiha (2023) Square groove detection based on Förstner with canny edge operator using laser vision sensor. International Journal of Advanced Manufacturing Technology, 125 (5-6). pp. 2885-2894. ISSN 0268-3768

Mohd Zabidi, Muhammad Izzat Zakwan and Ahmad, Aminah and Md Johari, Md Ashadi and Harun, Mohamad Haniff and Azahar, Arman Hadi and Khalid, Ahmad Khudzairi (2023) New enhancement method on sensing ability of micro resonator bottle structure using polymer materials drop-casting coating technique. Optoelectronics and Advanced Materials, Rapid Communications, 17 (11-12). pp. 477-483. ISSN 2065-3824

Mohd Zaki, Sharif and Azmi, Wan Hamzah and Mohd Fairusham, Fairusham Ghazali and Nurul Nadia Mohd, Zawawi and Hafiz Muhammad, Ali (2023) Numerical and thermo-energy analysis of cycling in automotive air-conditioning operating with hybrid nanolubricants and R1234YF. Numerical Heat Transfer, Part A: Applications, 83 (9). pp. 935-957. ISSN 1521-0634

Mohd Zini, Nurul Hilwa and Shikh Anuar, Fadhilah and Saadun, Mohd Noor Asril and Mohamed Nor, Mohd Khairi and Yaakob, Mohd Yuhazri and Narasimmanaidu, Satishwara Rao (2023) Effect of storage tank material on biodiesel stability under different environmental conditions. Jurnal Tribologi, 36. pp. 32-42. ISSN 2289-7232

Muhammad Khodri Harahap, Afif Zuhri and Nursal, Ahmad Taufik and Sahlan, Mohd Khairulnizam and Che Sobry, Suheil (2023) The characteristics of demand rates in inventory routing problem. Advances in Social Sciences Research Journal, 10 (7). pp. 76-84. ISSN 2055-0286

Mukhtar, Mohd Fariduddin and Abal Abas, Zuraida and Abdul Rasib, Amir Hamzah and Asmai, Siti Azirah and Hairol Anuar, Siti Haryanti and Mohd Zaki, Nurul Hafizah and Zainal Abidin, Zaheera and Abdul Rahman, Ahmad Fadzli Nizam (2023) Global structure model modification to improve influential node detection. ARPN Journal Of Engineering And Applied Sciences, 18 (3). pp. 220-225. ISSN 1819-6608

Mukhtar, Mohd Fariduddin and Abdul Rasib, Amir Hamzah and Mohd Zaki, Nurul Hafizah and Zainal Abidin, Zaheera and Abal Abas, Zuraida and Hairol Anuar, Siti Haryanti and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad (2023) Hybrid global structure model for unraveling influential nodes in complex networks. International Journal of Advanced Computer Science and Applications, 14 (6). pp. 724-730. ISSN 2158-107X

Muniandy, Subathra and Idris, Muhammad Idzdihar and Mohammed Napiah, Zul Atfyi Fauzan and Baharudin Zamani, Zarina and Rashid, Marzaini and Bradley, Luke (2023) A Comparison of the performance of MAPbI3 and MASnI3 as an inverted perovskite structure using NiO as HTL through numerical GPVDM simulation. Pertanika Journal of Science and Technology, 31 (5). pp. 2453-2471. ISSN 0128-7680

Nadia Nasser Abdulla Khamis Al Junaibi and Kamarudin, Mohd Fauzi (2023) Human resource practices and innovativeness: A conceptual paper. International Journal Of Professional Business Review, 8 (7). 01-13. ISSN 2525-3654

Narayanamurthy, Vigneswaran and Futane, Abhishek Shankar and Jadhav, Pramod and Srinivasan, Arthi (2023) Aptamer‑based rapid diagnosis for point‑of‑care application. Microfluidics and Nanofluidics, 27 (2). pp. 1-33. ISSN 1613-4982

Narayanamurthy, Vigneswaran and Samsuri, Fahmi and Jeroish, Z. E. and Shankar, Abhishek Futane and Shanmugavel, Bhuvaneshwari Kumaravel (2023) Design, optimization, fabrication and analysis of Cu microheater for loop-mediated isothermal amplification (LAMP) applications. Materials Today Communications, 36. pp. 1-13. ISSN 2352-4928

Narayanamurthy, Vigneswaran and Shankar, Abhishek Futane and Gannapathy, Vigneswara Rao and Jadhav, Pramod and Kok, Swee Leong (2023) Emerging trends in computational biosensors: Challenges and future directions. Journal of Survey in Fisheries Sciences, 10 (1). pp. 2888-2905. ISSN 2368-7487

Ngah, Razali and Salh, Adeeb and Audah, Lukman and Abdullah, Qazwan and Kim, Kwang Soon and Al-Moliki, Yahya Mohammed Hameed and AlJaloud, Khaled A. and Talib, Md Hairul Nizam (2023) Energy-efficient federated learning with resource allocation for green IoT edge intelligence in B5G. IEEE Access, 11. pp. 16353-16367. ISSN 2169-3536

Nik Ghazali, Nik Nazri and Abdul Latif, Mohd Faruq and Mohd Faizal, Abdullah and Ibrahim, Norliza and Mohd Razi, Roziana and Badruddin, Irfan Anjum (2023) Modelling the upper airways of mandibular advancement surgery: A systematic review. Mathematics, 11 (1). pp. 1-17. ISSN 2227-7390

Nordin, Nur Syahidah and Mohd Kasim, Abdul Rahman and Mokhtar, Masyfu’ah and Waini, Iskandar (2023) The mixed of hybrid nanofluid GO-MoS2/engine oil over a shrinking sheet with mass flux effect: Reiner-Philippoff model. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 108 (2). pp. 122-139. ISSN 2289-7879

Norhidayah, Mohamad Yatim and Mohd Noh, Zarina and Jamaludin, Amirul and Buniyamin, Norlida (2023) Rao-blackwellized particle filter algorithm integrated with neural network sensor model using laser distance sensor. Micromachines, 14 (3). pp. 1-17. ISSN 2072-666X

Omar, Nooririnah and Yusuf, Yusliza and Sundi, Syahrul Azwan and Abu Bakar, Ilyani Akmar and Abd Rahim, Toibah and Fabiani, Verry Andre and Yamada, Motohiro (2023) Influence of remaining oxide on the adhesion strength of supersonic particle deposition TiO2 coatings on annealed stainless steel. Coatings, 13 (6). pp. 1-19. ISSN 2079-6412

Opia, Anthony Chukwunonso and Ali, Audu Ibrahim and Abdollah, Mohd Fadzli bin and Mohd Kameil, Abdul Hamid and Syahrullail, Samion and Mama, Stanly Chinedu and Saleh, Abdelgade Agilah and Sule, Ahmed and Johnson, Charles N (2023) Tribological performance evaluation of organic polymer as additives in vegetable oil using steel materials. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (12). pp. 2178-2186. ISSN 1350-6501

Othman, Mohd Azlishah and Adnan, Nur Saqirah and Misran, Mohamad Harris and Meor Said, Maizatul Alice and Hassan, Nurmala Irdawaty (2023) Optimizing dual-band antenna efficiency: Ridge width parametric study of quad ridge horn antennas. ARPN Journal Of Engineering And Applied Sciences, 18 (15). pp. 1787-1791. ISSN 1819-6608

Paul, Liton Chandra and Ankan, Sarker Saleh Ahmed and Rani, Tithi and Karaaslan, Muharrem and Hossain, Md. Najmul and Al Gburi, Ahmed Jamal Abdullah and Saha, Himel Kumar and Alkurt, Fatih Özkan (2023) A wideband highly efficient omnidirectional compact antenna for WiMAX/Lower 5G communications. International Journal Of RF And Microwave Computer-Aided Engineering, 2023 (723744). pp. 1-11. ISSN 1096-4290

Pethuraj, Mohamed Shakeel and Mohd Aboobaider, Burhanuddin and Salahuddin, Lizawati (2023) Analyzing QoS factor in 5G communication using optimized data communication techniques for E-commerce applications. Optik, 272. pp. 1-14. ISSN 0030-4026

Pethuraj, Mohamed Shakeel and Mohd Aboobaider, Burhanuddin and Salahuddin, Lizawati (2023) Developing lung cancer post-diagnosis system using pervasive data analytic framework. Computers and Electrical Engineering, 105 (108528). pp. 1-13. ISSN 0045-7906

Pop, Ioan and Khashi’ie, Najiyah Safwa and Roșca, Natalia C. and Roșca, Alin V. (2023) Dual solutions on MHD radiative three-dimensional bidirectional nanofluid flow over a non-linearly permeable shrinking sheet. Alexandria Engineering Journal, 71. pp. 401-411. ISSN 1110-0168

Prasetiyo, Iwan and Gunawan and Yuliarto, Brian and Putra, Azma and Irianto (2023) Investigation on minute holes of woven fabrics for wide-band micro-perforated sound absorbers. Buildings, 13 (3). pp. 1-18. ISSN 2075-5309

Pujari, Satish and Kumar, Sattaru Santosh and S. Naveen, Nambala and Devi, Chinta Neelima and Subramonian, Sivarao (2023) Effect of magnetite on physical, tribological and magnetic characteristics of kenaf fibre. Emerging Materials Research, 12 (2). pp. 196-203. ISSN 2046-0147

Purwadi and Abu, Nur Azman and Mohd, Othman and Kusuma, Bagus Adhi (2023) Mixed pixel classification on hyperspectral image using imbalanced learning and hyperparameter tuning methods. International Journal On Informatics Visualization, 7 (3). pp. 910-919. ISSN 2549-9610

Putra, Azma and Kassim, Dg Hafizah and Ramlan, Roszaidi (2023) Enhancement of sound absorption of coir fiber using thin layer of kapok fibers. Journal of Natural Fibers, 20 (1). pp. 1-10. ISSN 1544-0478

Qamari, Ika Nurul and Byantara, Rizq Adyatma and Md Saad, Mohd Shamsuri (2023) Transformational leadership, organisational climate, and internal locus of control on innovative work behaviour in hospitality sector of rural area. BISMA (Bisnis dan Manajemen), 15 (2). pp. 119-138. ISSN 2549-7790

Qing Yuan, Wang and Zhongwei, Guan and Dullah, Abd Rahman and Xiaolian, Wang (2023) Finite element modelling of thermal and moisture mapping of layered cricket helmets. Heliyon, 9 (2). e13179. ISSN 2405-8440

Radin Umar, Radin Zaid and Ahmad, Nadiah and Mat Rashid, Rasyimawati (2023) Major hazard industries disaster preparedness: an empirical study of liquefied petroleum gas storage facilities. International Journal of Critical Infrastructures, 19 (1). pp. 17-39. ISSN 1475-3219

Radin Umar, Zaid @ Radin Zaid and Mat Rashid, Rasyimawati (2023) Control of industrial major accident hazard regulation in Malaysia: second decade in examination. International Journal of Public Health Science (IJPHS), 12 (1). pp. 138-145. ISSN 2252-8806

Rahim, Sarni Suhaila and Parumo, Shahril and Fadlan Faizal, Nur Zulaiha and Parumo, Shahril (2023) Evaluation of the effects of 2D animation on business law: Elements of a valid contract. International Journal Of Advanced Computer Science And Applications (IJACSA), 14 (6). pp. 487-496. ISSN 2158-107X

Rahim, Sarni Suhaila and Saleh, Hazira and Fadlan Faizal, Nur Zulaiha and Parumo, Shahril (2023) Development of a two-dimensional animation for business law: Elements of a valid contract. International Journal Of Advanced Computer Science And Applications (IJACSA), 14 (7). pp. 200-208. ISSN 2158-107X

Raja Othman, Raja Nor Firdaus Kashfi and Nor Aishah Md Zuki, Nor Aishah Md Zuki and Abdul Shukor, Fairul Azhar and Che Ahmad, Suhairi Rizuan (2023) Analysis of linear motor with symmetrical EMF vector for household elevator application. International Journal of Power Electronics and Drive Systems (IJPEDS, 14 (1). pp. 51-59. ISSN 2088-8694

Ramli, Rizauddin and Amiri, Mohammad Soleimani and Faizal, Aiman Hakimi (2023) Simultaneous localization and mapping and tag-based navigation for unmanned aerial vehicles. International Journal of Integrated Engineering, 15 (5). pp. 225-232. ISSN 2229-838X

Razali, Nadlene and Kamarolzaman, Anita Akmar and Abdul Hamid, Nurfaizey and Sheikh Md Fadzullah, Siti Hajar and Sharif, Emy Aqillah and Hamdan, Hasanudin and Ahmad Rashidi, Syazwan and Othman, Sarah (2023) Characterization of carbon fibre reinforced polyphenylene sulfide composite under interlaminar shear strength. Journal of Advanced Research in Applied Mechanics, 102 (1). pp. 1-9. ISSN 2289-7895

Rhaffor, Nuha and Wei, Keat Ang and Mohamed, Mohamed Fauzi Packeer and Rajendran, Jagadheswaran and Mohd Noh, Norlaili and Mustaffa, Mohd Tafir and Hairi, Mohd Hendra (2023) Design of radio frequency power amplifier for 2.45 GHz IoT application using 0.18 µm CMOS technology. Microelectronics International, 40 (4). pp. 246-254. ISSN 1356-5362

Risnanto, Slamet and Novi Mardiana and Hassan, Nor Hafeizah and Mohd, Othman and Abdurrohman and Hersusetiyati (2023) Constructing and optimizing an evaluation model for the implementation of electronic voting: An Indonesian case study. Mathematical Modelling of Engineering Problems, 10 (4). pp. 1401-1408. ISSN 2369-0739

Robani, Anidah and Mas Soeroto, Wisudanto and Widiastuti, Tika and Mardhiyah, Dien and Mawardi, Imron and Ningsih, Sri and Al Mustofa, Muhammad Ubaidillah (2023) Sustainable purchasing decisions for halal cosmetics in Indonesia. Journal of Sustainability Science and Management, 18 (11). pp. 68-86. ISSN 2672-7226

Romli, Fairuz Izzuddin and Mohamad Dasuki, Norhafizah and Harmin, Mohammad Yazdi (2023) Finite element analysis of the main structure for a new conceptual aircraft passenger vertical seat design. Journal of Advanced Research in Applied Mechanics, 112 (1). pp. 114-124. ISSN 2289-7895

Rozaki, Zuhud and Kamarudin, Mohd Fauzi and Abdul Aziz, Ammar and Senge, Masateru (2023) Exploring agricultural resilience in volcano-prone regions: A case study from Mount Merapi, Indonesia. Caraka Tani: Journal of Sustainable Agriculture, 38 (2). pp. 284-296. ISSN 2613-9456

S. M. M Yassin, S. M. Warusia Mohamed and Kamis, Noor Hisham and Abdollah, Mohd Faizal and Abdul Razak, Siti Fatimah and Yogarayan, Sumendra (2023) Blackhole attacks in internet of things networks: A review. Indonesian Journal Of Electrical Engineering And Computer Science, 30 (2). pp. 1080-1090. ISSN 2502-4752

Sadun, Amirul Syafiq and Chulakit, Saranjuu and Jalaludin, Nor Anija and Jalani, Jamaludin and Ahmad, Suziana and Bakar, Lilywati and Suhaimi, Muhamad Syafiq and Sabarudin, Nur Aminah (2023) A webcam and LabVIEW-based system for efficient object recognition based on colour and shape features. Journal of Advanced Research in Applied Mechanics, 104 (1). pp. 33-45. ISSN 2289-7895

Sadun, Amirul Syafiq and Chulakit, Saranjuu and Jalaludin, Nor Anija and Jalani, Jamaludin and Ahmad, Suziana and Md Hanapi, Muhammad Haziq and Sabarudin, Nur Aminah (2023) A centralized IoT-based process cycle time monitoring system for line balancing study. Journal of Advanced Research in Applied Mechanics, 105 (1). pp. 58-67. ISSN 2289-7895

Saealal, Muhammad Salihin and Ibrahim, Mohd Zamri and Yakno, Marlina and Arshad, Nurul Wahidah (2023) Three-dimensional convolutional approaches for the verification of Deepfake videos: The effect of image depth size on authentication performance. Journal Of Advances In Information Technology, 14 (3). pp. 488-494. ISSN 1798-2340

Saeed, Muhammad Haris and Abed Mohammed, Mazin and Kosar, Naveen and Hassan, Sadaf-ul and Nadeem, Sohail and Abd Ghani, Mohd Khanapi and Abdulkareem, Karrar Hameed (2023) Determination of bandgap of period 3, 4, and 5 transition metal dopants on zinc oxide using an artificial neural network based approach. Chemometrics and Intelligent Laboratory Systems, 242 (104983). pp. 1-11. ISSN 0169-7439

Salam, Sazilah and Ismail, Nurmaisarah and Mohamad, Siti Nurul Mahfuzah and Pudjoatmodjo, Bambang and Shafie, Norazlina and Lip, Rashidah and Norasikin, Mohd Adili and Shahbodin, Faaizah (2023) Mobile game model for monitoring Malaysian food calories intake using image recognition. Bulletin of Electrical Engineering and Informatics, 12 (3). pp. 1839-1848. ISSN 2089-3191

Salam, Sazilah and Rusdi, Jack Febrian and Shafie, Norazlina and Ahmad Fesol, Siti Feirusz (2023) Factors influencing technology acceptance for ubiquitous public transportation services in tourism. Bulletin Of Electrical Engineering And Informatics, 12 (6). pp. 3869-3879. ISSN 2089-3191

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan and Ahmad Jalaludin, Nabilah and Arith, Faiz and Mohd Zain, Anis Suhaila and Ahmad, Ibrahim and Md Junos @ Yunus, Siti Aisah and Abdul Hamid, Afifah Maheran (2023) Optimal modeling of perovskite solar cell with graphene oxide as hole transport layer using L32(28) Taguchi design. International Journal of Nanoelectronics and Materials, 17 (1). pp. 20-27. ISSN 1985-5761

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan and Mohd Zain, Anis Suhaila (2023) Work-function tuning on analogue properties of junction-less strained DG-MOSFET. Journal of Engineering Science and Technology, 18 (1). pp. 331-346. ISSN 1823-4690

Salim, Fadzilah and Abu, Nur Azman (2023) An S-curve efficient frontier on second-hand auto price. International Journal of Computational Economics and Econometrics, 13 (2). pp. 189-215. ISSN 1757-1170

Salim, Norhafiz and Zambri, Nor Aira and Suhaimi, Muhammad Firdaus and Sy Yi, Sim Yi (2023) Automatic generation control system: The impact of battery energy storage in multi area network. International Journal of Integrated Engineering, 15 (3). pp. 208-216. ISSN 2229-838X

Salleh, Hayatul Safrah and Mohd Arzaman, Ameer Farhan and Nik Mat, Nik Hazimah and Wan Talaat, Wan Izatul Asma (2023) Traditional knowledge of marine resources and its impact on the well-being of coastal communities in Peninsular Malaysia. International Journal of Design and Nature and Ecodynamics, 18 (3). pp. 693-703. ISSN 1755-7437

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Wakhi Anuar, Nur Farah Bazilah and W. Zamri, Wan Fathul Hakim and Md Ali, Afifah and Samat, Saziana (2023) Wear properties of graphene-reinforced aluminium metal matrix composite: A review. Reviews on Advanced Materials Science, 62 (1). pp. 1-27. ISSN 1606-5131

Salleh, Mohd Shukor and Wakhi Anuar, Nur Farah Bazilah and Omar, Mohd Zaidi and Wan Fathul Hakim, Wan Zamri and Yahaya, Siti Norbaya and Ali,, A. M. (2023) Effect of T6 heat treatment on microstructure and hardness properties of thixoformed graphene-reinforced A356 composites. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 1-13. ISSN 1985-3157

Shairi, Noor Azwan and Mohd Ibrahim, Imran and Zakaria, Zahriladha and Osman, Anwar Faizd (2023) Microstrip antenna with reflector and air gap for short range communication in 900 MHz band. Bulletin of Electrical Engineering and Informatics, 13 (2). pp. 955-962. ISSN 2089-3191

Shairi, Noor Azwan and Mohd Yasin, Fatin Nadiah and Othman, Adib and Zakaria, Zahriladha and Mohd Ibrahim, Imran and A Majid, Huda and Jamaluddin, Mohd Haizal and Ibrahim, Ayman Mohammed (2023) Design and analyses of reconfigurable dumbbell-shaped and modified H-Shaped DGSs in millimeter wave band. Przeglad Elektrotechniczny, 99 (7). pp. 96-100. ISSN 0033-2097

Shamsan, Zaid Ahmed and Isa Ashyap, Adel Yahya and Abbasi, Muhammad Inam and Kamarudin, ‪Muhammad Ramlee and Dahri, Muhammad Hashim and AlMuhanna, Khalid A. and Alorifi, Fawzi S. (2023) Multi-band metamaterial antenna for terahertz applications. Computers, Materials and Continua, 74 (1). pp. 1765-1782. ISSN 1546-2218

Shikh Anuar, Fadhilah and Mustapha, Khairul Azhar and Mohd Sa'at, Fatimah Al Zahrah and Mohd Zini, Nurul Hilwa and Mat Tokit, Ernie and Narasimmanaidu, Satishwara Rao and Hooman, Kamel (2023) Microstructural properties and surface roughness of 3D printed open cell-foam. Jurnal Tribologi, 36. pp. 16-31. ISSN 2289-7232

Simbolon, Luga Martin and Wellid, Ismail and Nita Nurfitriani and Falahuddin, Muhamad Anda and Sunardi, Cecep and Nuryati, Neneng and Sukri, Mohamad Firdaus (2023) Experimental investigation on PM10 and PM2.5 concentrations in North Bandung. International Journal of Applied Technology Research, 4 (2). pp. 95-105. ISSN 2721-7582

Siva, Irulappasamy and Shinde, Avinash Sudam and Munde, Yashwant and Sankar, Irulappasamy and Dhar Malingam, Sivakumar (2023) Assessment of friction and wear as a function of the pressure applied to the CNT-filled silicone rubber nanocomposite pins. International Journal of Surface Science and Engineering, 17 (1). pp. 58-71. ISSN 1749-785X

Subramonian, Sivarao and Kumaran, K. and Dharsyanth, R. and Md Ali, Mohd Amran and Salleh, Mohd Shukor and Pujari, Satish and Ramasamy, Devarajan and Vatesh, Umesh Kumar and Mahdi Al-Obaidi, Abdulkareem Sh and Ramesh, S. and Lee, Kit Yee Sara (2023) Predictive modeling of dimensional accuracies in 3D printing using artificial neural network. Journal Of Engineering Science And Technology, 18 (4). pp. 2148-2160. ISSN 1823-4690

Subramonian, Sivarao and Salleh, Mohd Shukor and Kadirgama, Kumaran and Al-Obaidi, Abdulkareem Sh. Mahdi and Vatesh, Umesh Kumar and Pujari, Satish and Rao, Dharsyanth and Ramasamy, Devarajan (2023) Artificial neural network performance modeling and evaluation of additive manufacturing 3D printed parts. Engineering, Technology & Applied Science Research, 13. pp. 11677-11684. ISSN 2241-4487

Suhami, Muhammad Wafiuddin and Ab Wahab, Norfariza and Hamzah, Khairum and Paijan, Lailatul Harina and Sasahara, Hiroyuki (2023) Characteristics of coconut fibre combined with vinyl ester composites through material testing and machining. Manufacturing Technology, 23 (5). pp. 700-708. ISSN 1213-2489

Sukadarin, Ezrin Hani and Fauzan, Nur Syafiqah and Widia, Mirta and Irianto, Irianto and Ghazali, Ihwan (2023) A systematic literature review of the factors influencing hearing protection device usage among industrial workers. International Journal of Environmental Research and Public Health, 20 (4). pp. 1-17. ISSN 1661-7827

Sulaiman, Noor Asyikin and Sabal Menanti, Nur Amalina and Abd Razak, Norazlina and Zainudin, Muhammad Noorazlan Shah and Norhidayah, Mohamad Yatim and Md Yusop, Azdiana and Abdullah, Md Pauzi (2023) Fault detection and diagnosis of air-conditioning system using long short-term memory recurrent neural network. Przeglad Elektrotechniczny, 9. pp. 113-117. ISSN 0033-2097

Sumarmi, Saptaningsih and Qamari, Ika Nurul and Md Saad, Mohd Shamsuri (2023) Organizational citizenship behavior predictors: A mediation analysis on savings and loan cooperative. Journal of Law and Sustainable Development, 11 (4). 01-21. ISSN 2764-4170

Sun, Fayou and Ngo, Hea Choon and Zuqiang, Meng and Sek, Yong Wee (2023) Loop and distillation: Attention weights fusion transformer for fine‐grained representation. IET Computer Vision, 17 (4). pp. 473-482. ISSN 1751-9632

Sutan Chairul, Imran and Abu Bakar, Norazhar and Ab Ghani, Sharin and Ahmad Khiar, Mohd Shahril and Rahim, Nor Hidayah and Md Arshad@Hashim, Syahrun Nizam (2023) Accelerated thermal aging of Kraft papers impregnated with dielectric liquids. Bulletin of Electrical Engineering and Informatics, 12 (5). pp. 2561-2568. ISSN 2302-9285

Sutan Chairul, Imran and Echimoto, Atsushi and Tazawa, Ryutaro and Murai, Kei-ichiro and Moriga, Toshihiro (2023) Fabrication of transparent ITO/GTO bilayer diode thin films. Modern Physics Letters B, 37 (19). pp. 1-5. ISSN 0217-9849

Suyu, Zhang and Ye Zi and Jaya Kumar, Yogan and Guanxi, Li and Fengyan, Song (2023) Bi-DCNet: Bilateral network with dilated convolutions for left ventricle segmentation. Life, 13 (4). pp. 1-13. ISSN 2075-1729

Syamimi, Shamsuddin and Azmin, Ahmad Faris and Mat Ali, Mahasan and Kamat, Seri Rahayu and Maharof, Madihah and Yussof, Hanafiah (2023) Evaluating kansei emotion responses in human-robot interaction with low-cost robots in educational setting. Journal of Advanced Manufacturing Technology (JAMT), 17 (3). pp. 113-127. ISSN 1985-3157

Syed Ahmad, Syed Mohd Faisal and Khairi, Hanif and Kamarudin, Mohd Fauzi (2023) The resilience of Malay silver craft design: Sustaining cultural heritage and promoting sustainable industrialization. E-Bangi Journal Of Social Science And Humanities, 20 (4). pp. 393-404. ISSN 1823-884X

Tamin, Norfauzi and Ng, Chuan Huat and Hamid, Abdul and Azlan, Umar Al-Amani (2023) Reducing the risk of agglomeration and shrinkage ceramic body from Al2O3-ZrO2 composition. Journal of Mechanical Engineering, 20 (3). pp. 223-237. ISSN 1823-5514

Teoh, Bak Aun and Mohd Arzaman, Ameer Farhan and Chew, Boon Cheong and Abd Aziz, Mohd Syafiq and Kamalrudin, Massila (2023) The impact of green supply chain practices towards operational performances among SMEs in Penang, Malaysia. International Journal of Sustainable Development and Planning, 18 (11). pp. 3381-3387. ISSN 1743-7601

Teoh, Ming Li and Wong, Chloe Zi En and Singaram, Nallammai and Chan, Sook Wah and Teoh, Wendy Ming Yen and Beardall, John (2023) Chlorella across latitudes: investigating biochemical composition and antioxidant activities for biotechnological applications. Advances in Polar Science, 34 (4). pp. 340-351. ISSN 1674-9928

Thamilarasan, Yarshini and Raja Ikram, Raja Rina and Osman, Mashanum and Salahuddin, Lizawati and Wan Bejuri, Wan Mohd Ya'akob and Kanchymalay, Kasturi (2023) Enhanced system usability scale using the software quality standard approach. Engineering, Technology & Applied Science Research, 13 (5). pp. 11779-11784. ISSN 1792-8036

Thong, Li Wah and Kok, Swee Leong and Ramlan, Roszaidi (2023) Enhanced piezoelectric energy harvesting system model leveraging phase shifting effects for optimization. Mathematical Modelling of Engineering Problems, 10 (3). pp. 921-929. ISSN 2369-0739

Thongkaew, Kunlapat and Naemsai, Thanwit and Mustafa, Zaleha (2023) Cost estimation for post abrasive waterjet cutting on customized jigsaw rubber mats. Journal of Advanced Manufacturing Technology (JAMT), 17 (1). pp. 1-16. ISSN 1985-3157

Ullah, Sadiq and Khan, Jalal and Ali, Usman and Matekovits, Ladislau and Ahmad Tahir, Farooq and Abbasi, Muhammad Inam (2023) A 37 GHz millimeter-wave antenna array for 5G communication terminals. Computers, Materials and Continua, 75 (1). pp. 1317-1330. ISSN 1546-2218

Wahid, Nur Syahirah and Md Arifin, Norihan and Khashi’ie, Najiyah Safwa and Pop, Ioan (2023) Three-dimensional unsteady radiative hybrid nanofluid flow through a porous space over a permeable shrinking surface. Chinese Journal of Physics, 85. pp. 196-211. ISSN 0577-9073

Waini, Iskandar and Alabdulhady, Sumayyah and Ishak, Anuar and Pop, Ioan (2023) Viscous dissipation effects on hybrid nanofluid flow over a non-linearly shrinking sheet with power-law velocity. Heliyon, 9 (10). pp. 1-12. ISSN 2405-8440

Waini, Iskandar and Hamzah, Khairum and Khashi’ie, Najiyah Safwa and Zainal, Nurul Amira and Mohd Kasim, Abdul Rahman and Ishak, Anuar and Pop, Ioan (2023) Brownian and thermophoresis diffusion effects on magnetohydrodynamic Reiner–Philippoff nanofluid flow past a shrinking sheet. Alexandria Engineering Journal, 67. pp. 183-192. ISSN 1110-0168

Wan Hamzah, Wan Azmi and Muhammad Ali, Hafiz and Mohd Zaki, Sharif and Mohd Fairusham, Ghazali and Mahendran, Samykano (2023) Performance improvement strategies of R1234yf in vapor compression refrigeration system as a R134a replacement: A review. Journal of the Taiwan Institute of Chemical Engineers, 148. pp. 1-16. ISSN 1876-1070

Waqas, Muhammad Sharif and Pop, Ioan and Khan, Umair and Zaib, Aurang and Ishak, Anuar and Waini, Iskandar and D. Albaqami, Munirah and Alotabi, Reham Ghazi (2023) Radiation effect on MHD three-dimensional stagnation-point f low comprising water-based graphene oxide nanofluid induced by a nonuniform heat source/sink over a horizontal plane surface. International Journal of Modern Physics B, 37 (15). pp. 1-20. ISSN 0217-9792

Wibawa, Aji Prasetya and Putri, Nastiti Susetyo Fanany and Al Rasyid, Harits and Nafalski, Andrew and Hashim, Ummi Rabaah (2023) Boosting and bagging classification for computer science journal. International Journal of Advances in Intelligent Informatics, 9 (1). pp. 27-38. ISSN 2442-6571

Wisnubhadra, Irya and Kamal Baharin, Safiza Suhana and Emran, Nurul Akmar and Budiyanto, Djoko Setyohadi (2023) Publishing and querying of spatiotemporal agriculture production data warehouse on semantic web using QB4MobOLAP. International Journal of Intelligent Engineering and Systems, 16 (3). 495 - 508. ISSN 2185-310X

Wong, Soan Hank and Selamat, Atikah Saadah (2023) Smart logistic adoption towards logistic performance. Journal of Technology Management and Technopreneurship, 11 (1). pp. 44-51. ISSN 2231-7996

Wong, Yan Chiew and Ahmed Abuhoureyah, Fahd Saad and Mohd Isira, Ahmad Sadhiqin (2023) WiFi-based human activity recognition through wall using deep learning. Engineering Applications of Artificial Intelligence, 127. pp. 1-16. ISSN 0952-1976

Wong, Yan Chiew and Saw, Chia Yee (2023) Neuromorphic computing with hybrid CNN-stochastic reservoir for time series WiFi based human activity recognition. Computers and Electrical Engineering, 111. pp. 1-11. ISSN 0045-7906

Yahya, M Farid and Ab Malek, Muhammad Faiz and Mat Dan, Reduan (2023) Investigation into magnetic drive sealless pump failure 3 flare gas recovery unit (FGRU). PLATFORM - A Journal of Engineering, 7 (1). pp. 30-33. ISSN 2636-9877

Yasin, Mohammad and Md Johari, Md Ashadi and Apsari, Retna (2023) Comparative study an effect of polymethyl methacrylate coating on optical microbottle resonator for enhancing sensing performance for ethanol liquid sensor. Microwave And Optical Technology Letters, 65 (2). pp. 690-696. ISSN 0895-2477

Yuan, Yee Yen and Wendy Teoh, Ming Yen and Chong, Siong Choy and Tee, Win Nee and Teoh, Ming-Li (2023) Perspectives of employers on graduate employability skills: A case of Malaysia. Asian Development Policy Review, 11 (4). pp. 229-243. ISSN 2518-2544

Yusop, Yusmarnita and Meor Shaari, Nurul Muslimah and Husin, Siti Huzaimah and Md Saat, Mohd Shakir and Hasan, Khairul Kamarudin (2023) Load and coupling variations analysis of capacitive power transfer at 6.78 MHz operating frequency for biomedical implantable device. ELEKTRIKA, 22 (2). pp. 1-7. ISSN 0128-4428

Yusuf, Yusliza and Mohammad Taha, Mastura and Omar, Nooririnah and Ghazali, Mariyam Jameelah (2023) A brief overview of the marine environmentally friendly anti-fouling surface strategy. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237 (6). pp. 1384-1393. ISSN 1350-6501

Yusuf, Yusliza and Wong, Chun Yip and Mohammad Taha, Mastura and Mustafa, Nuzaimah and Che Daud, Zuraidawani (2023) New wood dust reinforced recycled polypropylene composite filament and traditional polypropylene filament for FDM applications: Life cycle assessment study. Journal of Sustainability Science and Management, 18 (9). pp. 157-170. ISSN 2672-7226

ZAKUAN, NUR DIYANA and Jumaidin, Ridhwan and Selamat, Mohd Zulkefli and Mohd Suan, Mohd Shahadan and Hazrati, K. Z. and Md Yusof, Fahmi Asyadi and Ilyas, R. A. and Eldin, Sayed M. (2023) EFFECT OF PANDANUS AMARYLLIFOLIUS FIBRE ON PHYSIO-MECHANICAL, THERMAL AND BIODEGRADABILITY OF THERMOPLASTIC CASSAVA STARCH/BEESWAX COMPOSITES. JOURNAL OF POLYMERS AND THE ENVIRONMENT. pp. 1-17. ISSN 1566-2543

Zahari, Madiha and Hamzah, Rostam Affendi and Abd Manap, Nurulfajar and Herman, Adi Irwan (2023) Stereo matching algorithm for autonomous vehicle navigation using integrated matching cost and non-local aggregation. Bulletin of Electrical Engineering and Informatics, 12 (1). pp. 328-337. ISSN 2089-3191

Zaib, Aurang and Khan, Umair and Ishak, Anuar and Waini, Iskandar and Pop, Ioan and Elattar, Samia and M. Abed, Ahmed (2023) Stagnation point flow of a water-based graphene-oxide over a stretching/shrinking sheet under an induced magnetic field with homogeneous-heterogeneous chemical reaction. Journal of Magnetism and Magnetic Materials, 565. pp. 1-11. ISSN 0304-8853

Zaib, Aurang and Yangyang, Yu and Khan, Umair and Ishak, Anuar and Waini, Iskandar and Raizah, Zehba and M. Galal, Ahmed (2023) Exploration of 3D stagnation-point flow induced by nanofluid through a horizontal plane surface saturated in a porous medium with generalized slip effects. Ain Shams Engineering Journal, 14 (2). pp. 1-10. ISSN 2090-4479

Zainal, Nurul Amira and Khashi’ie, Najiyah Safwa and Waini, Iskandar and Hamzah, Khairum and Sayed Nordin, Sayed Kushairi and Mohd Kasim, Abdul Rahman and Nazar, Roslinda and Pop, Ioan (2023) Analysis of solution stability in Al2O3-Cu/H2O over a stretching/shrinking wedge. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 111 (2). pp. 116-125. ISSN 2289-7879

Zainal, Nurul Amira and Khashi’ie, Najiyah Safwa and Waini, Iskandar and Mohd Kasim, Abdul Rahman and Nazar, Roslinda and Pop, Ioan (2023) Dual solutions for general three-dimensional MHD boundary layer stagnation-point flow of hybrid nanofluid and heat transfer. International Journal of Numerical Methods for Heat & Fluid Flow, 33 (12). pp. 4015-4036. ISSN 0961-5539

Zainal, Nurul Amira and Waini, Iskandar and Khashi’ie, Najiyah Safwa and Hamzah, Khairum and Sayed Nordin, Sayed Kushairi and Mohd Kasim, Abdul Rahman and Nazar, Roslinda and Pop, Ioan (2023) Stability analysis of unsteady flow and heat transfer of rear stagnation point in hybrid nanofluids with thermal radiation and magnetic impact. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (1). pp. 84-93. ISSN 2811-3950

Zainal, Nurul Amira and Waini, Iskandar and Khashi’ie, Najiyah Safwa and Nazar, Roslinda and Pop, Ioan (2023) Thermal radiation effect on unsteady MHD rear stagnation point in Al2O3-Cu/H2O hybrid nanofluids. Journal of Quality Measurement and Analysis, 20 (1). pp. 1-13. ISSN 2600-8602

Zainal, Nurul Amira and Zabidi, Mohamad Nazaem and Ab Razak, Mohd Suffian and Md Sullah, Ariff (2023) Impact of different blade counts on in-pipe drag-type water turbines. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (2). pp. 68-77. ISSN 2289-7879

Zainudin, Muhammad Noorazlan Shah and Mohd Hussin, Najihah and Mohd Saad, Wira Hidayat and Kamarudin, Muhammad Raihaan and Muhammad, Sufri and Abd Razak, Muhd Shah Jehan (2023) Chili fruits maturity estimation using various convolutional neural network architecture. Indonesian Journal of Electrical Engineering and Computer Science, 33 (1). pp. 557-567. ISSN 2502-4752

Zakaria, Kamarul Ariffin and Tar, Vishaldeep and Yusuff, Mohd Asri and Roseli, Adnan and Ali, Mohd Basri and Tajul Arifin, Ahmad Mubarak (2023) Effect of weight percentage on physical and mechanical properties of coconut shell reinforced polymer composite. ARPN Journal of Engineering and Applied Sciences, 18 (17). pp. 2051-2057. ISSN 1819-6608

Zakaria, Mohamad Shukri and Ramli, Mizah and Nordin, Mohd Nur Azmi and Mohd Azli, Daniel Azlan and Shaifuddin, Syahin and Dziaudin, Andee Faeldza and Omar, Ghazali and Lim Abdullah, Abdullah Halim (2023) Equivalent plastic-strain analysis of copper stretchable electronic circuit using finite element analysis. Journal of Advanced Research in Applied Sciences and Engineering Technology, 30 (1). pp. 31-43. ISSN 2462-1943

Zakaria, Zahriladha and Abd Rahman, Norhanani and Al Gburi, Ahmed Jamal Abdullah and Palandoken, Merih (2023) Realizing the high q-factor of a CSIW microwave resonator based on an MDGS for semisolid material characterization. Micromachines, 14 (5). pp. 1-30. ISSN 2072-666X

Zakaria, Zahriladha and Abd Rahman, Norhanani and Mohd Ibrahim, Imran and Al Gburi, Ahmed Jamal Abdullah and Althuwayb, Ayman Abdulhadi and Saeidi, Tale and Dayo, Zaheer Ahmed and Ahmad, Sarosh (2023) A miniaturized and highly sensitive microwave sensor based on CSRR for characterization of liquid materials. Materials, 16 (9). pp. 1-21. ISSN 1996-1944

Zakaria, Zahriladha and Al Gburi, Ahmed Jamal Abdullah and Ali, Ayyaz and Munir, Mehr E and Marey, Mohamed and Mostafa, Hala and Bhatti, Farooq Ahmed (2023) A compact MIMO multiband antenna for 5G/WLAN/WIFI-6 devices. Micromachines, 14 (6). pp. 1-16. ISSN 2072-666X

Zhin, Adam Puah Leong and Phuman Singh, Amrik Singh and Abu Kassim, Khairil Anwar and Ahmad, Fauzi and Abdullah, Mohd Azman (2023) Roll and pitch motion control using active suspension under combined steering and braking inputs. International Review of Mechanical Engineering, 17 (12). pp. 580-589. ISSN 1970-8734

Zulkafli, Nur Izyan and Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Muhajir, Asjufri and Hanak, Dawid P. (2023) Performance analysis and optimisation of the chiller-air handling units system with a wide range of ambient temperature. Cleaner Engineering and Technology, 14 (100643). pp. 1-16. ISSN 2666-7908

Zulkafli, Nur Izyan and Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Muhajir, Asjufri and Sulaima, Mohamad Fani and Hanak, Dawid Piotr (2023) Optimal planning of multi-compressors refrigeration system for maximising efficiency with the influence of weather condition. Chemical Engineering Transactions, 106. pp. 541-546. ISSN 2283-9216 (Submitted)

Book Chapter

Nguyen, Van Toan and Truong, Thi Kim Tuoi and Nguyen, Huu Trung and Samat, Khairul Fadzli and Nguyen, Van Hieu and Takahito, Ono (2023) Micro-thermoelectric generators: Material synthesis, device fabrication, and application demonstration. In: Latest research on energy recovery. IntechOpen, London, United Kingdom, pp. 1-25. ISBN 9781803556116

Conference or Workshop Item

Ab Rashid, Amier Hafizun and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Hassan, Nornikman and Mazalan, Mazlee and Mahmod, Nurzaima (2023) CPW pentagonal patch antenna with multiple slots effect for WLAN and WiMAX applications. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Ab Rashid, Amier Hafizun and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Hassan, Nornikman and Mazalan, Mazlee and Mahmod, Nurzaima (2023) Dual band CPW pentagonal island with modified sierpinski gasket structure at 3.5 GHz and 5.8 GHz. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Abdul Aziz, Ahmad Mujaher and Muniandy, Subathra and Idris, Muhammad Idzdihar and Mohammed Napiah, Zul Atfyi Fauzan and Baharudin Zamani, Zarina and Norddin, Nur Bahirah and Rashid, M (2023) Investigation of the performance impact of active layer parameter variations on inverted perovskite solar cells using GPVDM. In: 14th IEEE Regional Symposium on Micro and Nanoelectronics, RSM 2023, 28 August 2023 through 30 August 2023, Langkawi.

Abdul Aziz, N.H. and Mahadi, M.A.A. and Mohd Noh, Zarina and Othman, K.A. (2023) Drone detection using ultrasonic sensors for passive forward scattering radar system. In: 4th International Conference on Emerging Electrical Energy, Electronics and Computing, ICE4CT 2022, 28 December 2022 through 29 December 2022, Hybrid, Arau.

Abdul Hamid, Norihan and Jasny, Muhammad haziq hazmani and Ibrahim, Mazree (2023) An evaluation of the system performance of alarm and vehicle detection (AAVD) through internet of things (IoT). In: 3rd International Conference on Electrical and Electronics Engineering 2021: Versatility of Electrical and Electronics Engineering Solutions for Sustainable Future, ICON3E 2021, 6 September 2021 through 7 September 2021, Virtual, Online.

Abdul Kadir, Aida Fazliana and Sulaima, Mohamad Fani and Ab Aziz, Nur Hakimah and Mohd Zin, Ahmad Najmi and Shareef, Hussain and Rahman, Zulkifli Ab (2023) Evaluation of charging costs for various types of EVs in Malaysia. In: 2023 10th International Conference on Power and Energy Systems Engineering, CPESE 2023, 8 September 2023 through 10 September 2023, Nagoya.

Abdul Razak, Nur Atiqah Husna and Ramlee, Ridza Azri and Ahmed Kamal, Ibrahim Faris and Andre, H and Khmag, Asem (2023) IoT-BSEM internet of things-based smart energy meter for domestic house. In: 1st International Conference on Mechanical Engineering and Emerging Technologies, ICOMEET 2021, 3 November 2021, Padang, Virtual.

Abdullah, Haslina and Isa, Nurshafinaz and Zakaria, Mohamad Shukri (2023) Optimization machining parameters in pocket milling using genetic algorithm and mastercam. In: 12th International Conference on Mechanical and Manufacturing Engineering 2022 , ICME 2022, 9 August 2022 through 10 August 2022, Virtual, Online.

Abidin, Aa Zezen Zaenal and Othman, Mohd. Fairuz Iskandar and Hassan, Aslinda and Murdianingsih, Yuli and Suryadi, Usep Tatang and Faizal, Muhammad (2023) LoRa-based waste bin monitoring for making decision waste disposal using C 4.5 method. In: 8th International Conference on Informatics and Computing, ICIC 2023, 8 December 2023through 9 December 2023, Hybrid, Malang.

Abu, Nur Azman and Kedah, Zulkarnain and Rahardja, Untung and Sibarani, Blasius Erik and Kosasi, Sandy and Dewi, Susanti and Fadli, Ihya Syihabul (2023) Digital ringgit: a new digital currency with traditional attributes. In: 11th International Conference on Cyber and IT Service Management, CITSM 2023, 10 November 2023through 11 November 2023, Hybrid, Makassar.

Abuhoureyah, Fahd Saad and Wong, Yan Chiew and Mohd Isira, Ahmad Sadhiqin and Chuah, Joon Huang (2023) Addressing location dependency in human activity recognition using channel state information via 3D- CWT approach. In: 5th IEEE International Conference on Artificial Intelligence in Engineering and Technology, IICAIET 2023, 12 September 2023through 14 September 2023, Kota Kinabalu.

Adnan, Nur Hidayah and Ahmad, Ibrahim and Sarudin, Norziah (2023) The designing an augmented reality application for autism user using perception and response attribute: A conceptual framework. In: 1st International Conference on Frontiers of Digital Technology Towards a Sustainable Society, ICDiTS 2021, 26 January 2022 through 27 January 2022, Virtual, Online.

Ahamat, Amiruddin and Jaafar, Adib Akram and Shah Wahid, Mansor and Robani, Anidah and Ismail, Albert Feisal @ Muhd Feisal and Aris, Amir (2023) Challenges of SME exporting ; a case study of a halal food manufacturer. In: 2023 IEEE International Conference on Technology Management, Operations and Decisions, ICTMOD 2023, 22 November 2023 through 24 November 2023, Rabat.

Ahmad, Mohd Ashraf and Mohd Tumari, Mohd Zaidi and Ghazali, Mohd Riduwan and Suid, Mohd Helmi and Jui, Julakha Jahan (2023) Robust PID tuning of AVR system based on Indirect Design Approach-2. In: 2023 International Conference on System Science and Engineering, ICSSE 2023, 27 August 2023 through 28 August 2023, Virtual, Ho Chi Minh City.

Ahmad, Rabiah and Hassan, Aslinda and Hsiung, Lee Hwee and Othman, Mohd Fadzrin (2023) Peer online training (POT) as learning activity in computer security audit and risks management teaching module. In: 17th International Conference on Knowledge Management in Organisations, KMO 2023, 24 July 2023through 27 July 2023, Bangkok.

Akbar, Muhammad Rezeki and Aripriharta and Mizar, Alfian and Muladi, Muladi and Ching, Hung-Yu and Amin, Muhammad Adib (2023) Techno-economical analysis of hybrid PV system for school industry. In: 3rd IEEE International Conference in Power Engineering Applications, ICPEA 2023, 6 March 2023through 7 March 2023, Virtual, Online.

Alam, Syah and Shairi, Noor Azwan and Zakaria, Zahriladha and Alaydrus, Mudrik and Surjati, Indra and Firmansyah, Teguh (2023) Independent permittivity sensor based on dual T-shaped resonator for solid material characterization. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Alam, Syah and Zakaria, Zahriladha and Surjati, Indra and Shairi, Noor Azwan and Alaydrus, Mudrik and Firmansyah, Teguh (2023) Highly independent dual-band permittivity sensors for simultaneous measurement of solid materials. In: 33rd International Conference Radioelektronika, RADIOELEKTRONIKA 2023, 19 April 2023 through 20 April 2023, Pardubice.

Alamsyah, Doni Purnama and Aryanto, Rudy and Mulyani, Mulyani and Kurnianingrum, D and Indriana, Indriana and Othman, Norfaridatul Akmaliah and Hasan, Hazmilah (2023) The development concept of digital advertising preference. In: 4th Tarumanagara International Conference of the Applications of Technology and Engineering, TICATE 2022, 5 August 2021 through 6 August 2021, Virtual, Online.

Ali, Amira Noor Farhanie and Sulaima, Mohamad Fani and Tahir, Musthafah Mohd. and Razak, Intan Azmira Wan Abdul and Kadir, Aida Fazliana Abdul and Rahman, Zulkifli Ab. (2023) Hybridization solution of electrical energy demand response and forecasting program by using PSO-LSSVM technique. In: 2nd International Conference on Computer System, Information Technology, and Electrical Engineering, COSITE 2023, 2 August 2023through 3 August 2023, Banda Aceh.

Ali, Muazam and Omar, Siti Sarah and Ali, Murtaza and Ahmad, Idayuwati and Yen, Wendy Teoh Ming (2023) A cross-culture study of entrepreneurial intention: The moderating role of national culture. In: 18th European Conference on Innovation and Entrepreneurship, ECIE 2023, 21 September 2023 through 22 September 2023, Porto.

Alieyah, Nurul and Buja, Alya Geogiana and Masri Sahri, Nor and Ahmad, Rabiah and Abdul Latip, Shekh Faisal and Fadly Habidin, Nurul and Darus, Mohamad Yusof and Shahril Hussin, Mohd and Saat, Saharudin (2023) Development of a new synergistic cyber security awareness model for the elderly in Malaysia (SCSAM-elderly). In: 8th IEEE International Conference on Recent Advances and Innovations in Engineering, ICRAIE 2023, 2 December 2023through 3 December 2023, Kuala Lumpur.

Alwi, Shaliza and Salleh, MasrinaNadia Mohd and Abu, MohdFathi and Ismail, Albert Feisal @ Muhd Feisal and Saleh Abbas, Mohd and Haris Fadzilah, Asmaul Husna (2023) Concept of integration of blockchain and artificial intelligence. In: 3rd International Conference on Advance Computing and Innovative Technologies in Engineering, ICACITE 2023, 12 May 2023 through 13 May 2023, Greater Noida.

Amin, Mohd Rushidi Mohd and Abbas, Mohd Saleh and Ismail, Albert Feisal and Rahmat, Robaisya and Zolkefle, Nor Zuleikha Nawal and Nordin, Mohd Norazmi (2023) Blockchain systems and applications: evaluating the opportunities of the blockchain technology in various industries. In: 3rd International Conference on Advance Computing and Innovative Technologies in Engineering, ICACITE 2023, 12 May 2023through 13 May 2023, Greater Noida.

Andre, Hanalde and Seyepa, Teguh Putra Trila and Luthfi, Amirul and Fitrah, Ridho Aidil and Zaky, Toha and Ramlee, Rizda Azri (2023) Metal crack size recognizing used circular patch antenna. In: 2nd International Conference on Disaster Mitigation and Management, ICDMM 2023, 29 September 2023through 30 September 2023, Padang.

Anuar, Muhammad Zahirulhaq Zainol and Zambri, Nor Aira and Salim, Norhafiz and Yi, Sim Sy and Hassan, Omar Abu (2023) Automated bicycle crash detection system. In: 3rd International Conference on Electrical and Electronics Engineering 2021: Versatility of Electrical and Electronics Engineering Solutions for Sustainable Future, ICON3E 2021, 6 September 2021 through 7 September 2021, Virtual, Online.

Arep @ Ariff, Hambali and Che Manan, Adila Fazliana and Hambali, Ruzy Haryati and Arif, Sazelin and Lim, Guo Dong (2023) Development of conceptual design of female hygienic urinal bedridden using total design approach. In: 1st International Conference on Mechanical Engineering and Emerging Technologies, ICOMEET 2021, 3 November 2021, Padang, Virtual.

Arep @ Ariff, Hambali and Zulkefli, Zarul Amri and Mohd Ishak, Noordiana and Karim, M and Gunawarman (2023) Development of conceptual spin grind dryer design using integrated approach. In: 1st International Conference on Mechanical Engineering and Emerging Technologies, ICOMEET 2021, 3 November 2021, Padang, Virtual.

Arianti, Nunik Destria and Muda, Azah Kamilah and Ahmad, Norashikin (2023) Red blood cells classification with sharpening segmentation and mask R-CNN. In: 14th International Conference on Soft Computing and Pattern Recognition, SoCPaR 2022, and the 14th World Congress on Nature and Biologically Inspired Computing, NaBIC 2022, 14 December 2022through 16 December 2022, Virtual, Online.

Ariffin, Eddy Azrai and Munir, Fudhail Abdul and Rahman, Abdul Razak Abdul and Yob, Mohd Shukri (2023) Investigation on the effect of direct welding heat for on-stream repair of stainless steel piping. In: Article number 0300082nd International Conference on Design, Energy, Materials and Manufacture 2021, ICDEMM 2021, 4 August 2021, Pekanbaru.

Arina Manasikhana, Dita and Permanasari, Avita Ayu and Puspitasari, Poppy and Mohd Rosli, Mohd Afzanizam and Sukarni, Sukarni and Kusumaningsih, Haslinda and Dzulfikar, Muhammad (2023) Effect of TiO2/Al2O3 hybrid nanofluid and irradiation time on solar photovoltaic thermal performance. In: 4th International Conference on Green Civil and Environmental Engineering, GCEE 2023, 8 August 2023through 10 August 2023, Bali.

Awang Ahmad, Mohd Zainuddin and Yob, Mohd Shukri and Mat Tahir, Noor Ayuma and Abd Latif, M.J. (2023) Experienced of thermal fatigue failure on closed blowdown system line in delay coker unit. In: 7th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2021, 29 November 2021 through 29 November 2021, Virtual, Online.

Azemi, Saidatul Norlyana and Azreen Azemin, Wan Nur and Amir, Amiza and Che Beson, Rashidi and Hassan, Nornikman (2023) UHF RFID tag antennas for wearable devices. In: 2nd International Symposium on Engineering and Technology, ISETech 2021, 5 October 2021, Virtual, Online.

Azemi, Saidatul Norlyana and Iffah Azhar, Nur Hafizah and Amir, Amiza and Che Beson, Rashidi and Kamalrudin, Massila (2023) Localization of person under surveillance using GPS mobile apps. In: 2nd International Symposium on Engineering and Technology, ISETech 2021, 5 October 2021, Virtual, Online.

Baharom, Mohamad Zairi and Ahmad, Zulkifli and Ismail, Nursya Mimie Ayuny and Hassan, Mohd Hasnun Arif and Karjanto, Juffrizal and Abu Kassim, Khairil Anwar (2023) Factors contributing to the pedal error or pedal misplacement among Malaysian car drivers a survey. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Baharom, Mohamad Zairi and Manap, Zulkifli Ahmad and Ismail, Nursya Mimie Ayuny and Hassan, Mohd Hasnun Arif and Karjanto, Juffrizal and Kassim, Khairil Anwar Abu (2023) Pedal error naturalistic driving study among Malaysian drivers. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 through 5 November 2021, Virtual, Online.

Balasupainam, Vasugi and Abdul Rashid, Nurulizwa and Jabar, Juhaini (2023) Eco-innovation capabilities towards SMEs food manufactures' sustainability in developing countries. In: 11th International Conference on Applied Science and Technology 2022, ICAST 2022, 13 June 2022 through 14 June 2022, Hybrid, Putrajaya.

Basari, Amat Amir and Yan, Ng Xue (2023) Experimental evaluation of impact mode multiple piezoelectric power generator. In: International Conference on Electrical and Electronics Engineering 2021: Versatility of Electrical and Electronics Engineering Solutions for Sustainable Future, ICON3E 2021, 6 September 2021 through 7 September 2021, Virtual, Online.

Basri, Nurul Aqilah and Ahmad Affendi, Nor Afifah and Krishnan, Vijayletchumi and Razeman, Hafizah and Ibrahim, Siti Zuraidah and Mohd Sultan, Juwita (2023) Electronic medicine organizer box with telegram bot. In: 2nd International Symposium on Engineering and Technology, ISETech 2021, 5 October 2021, Virtual, Online.

Batumalay, M. and Zain, H.A. and Abdul Rahim, Hazli Rafis and Harun, S.W. (2023) Development and analysis of whispering gallery mode model for refractive index sensing. In: 6th Photonics Meeting 2023, PM 2023, 10 June 2023 through 11 June 2023, Kuala Terengganu.

Bimazlim, Muhammad Aniq Shahmi and Ismail, Baharuddin and Aihsan, Muhammad Zaid and Ali, Rosnazri and Talib, Md Hairul Nizam and Muhammad Azhar Walter, Muhammad Sirajuddin and Mazalan, Siti Khodijah and Hafizi Rohani, Mohamad Nur Khairul (2023) Selective harmonic elimination pulse width modulation for three-phase nine-level inverter using improved whale optimization algorithm. In: 2nd International Symposium on Engineering and Technology, ISETech 2021, 5 October 2021, Virtual, Online.

David, Thevaneyan Krishta and Krishnamoorthy, Renga Rao and Sivarao, Subramonian and Ramesh, S. (2023) Compressive and flexural strength of coal bottom ash lightweight concrete. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

David, Thevaneyan Krishta and Subramonian, Sivarao and Ramesh, S. (2023) Engineering research the perspective towards a sound conduct. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

Dayong, Zhang and Wahab, Nur Haliza Abdul and Kadir, Khairunnisa A. and Aldhaqm, Arafat and Nasir, Haslinah Mohd and Wong, Keng Yinn (2023) Research on blockchain: privacy protection of cryptography blockchain-based applications. In: 3rd International Conference on Emerging Smart Technologies and Applications, eSmarTA 2023, 10 October 2023through 11 October 2023, Taiz.

Farhana, Kaniz and Kadirgama, Kumaran and Mohamed, Danial and Faisal Mahamude, Abu Shadate and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran (2023) An experimental evaluation of specific heat of mono and hybrid nanofluids. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Farhana, Kaniz and Kadirgama, Kumaran and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran and Mahmude, Abu Shadate Faisal (2023) Applications of graphene nanomaterials in energy storage—a state-of-art short review. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Farhi, Faycal and Jeljeli, Riadh and Aburezeq, Ibtehal and Zamoum, Khaled and Al-Shami, Samer Ali Hussein and Hacini, Ishaq (2023) Determinants behind continuous intention to use data journalism among Emirati journalists. In: 2023 International Conference on Multimedia Computing, Networking and Applications, MCNA 2023, 19 June 2023 through 22 June 2023, Hybrid, Valencia.

Fawazi, Noor and Man, M. H.C. and Parnon, Mohamad Afiq Amiruddin (2023) Damage detection in a free-free beam structure using reconstructed mode shape data: Experimental approach. In: 2021 International Conference of SNIKOM, ICoSNIKOM 2021, 18 September 2021, Medan.

Fawazi, Noor and Mqan, M.H.C. and Parnon, Mohamad Afiq Amiruddin (2023) Damage detection in a free-free beam structure using reconstructed mode shape data: Numerical approach. In: 2021 International Conference of SNIKOM, ICoSNIKOM 2021, 18 September 2021, Medan.

Fuad, Ali and Mohd Aboobaider, Burhanuddin and Abd Ghani, Mohd Khanapi (2023) Intelligent systems-enabled decentralized e-government framework for higher education in Iraq: a conceptual data fusion approach. In: 1st IEEE International Conference on Emerging Research in Computational Science, ICERCS 2023, 7 December 2023 through 9 December 2023, Hybrid, Coimbatore.

Fuad, Ali and Mohd Aboobaider, Burhanuddin and Abd Ghani, Mohd Khanapi (2023) Key factors influencing a decentralized IoT-based electronic government model for higher education in Iraq : an intelligent systems perspective. In: 1st IEEE International Conference on Emerging Research in Computational Science, ICERCS 2023, 7 December 2023 through 9 December 2023, Hybrid, Coimbatore.

Ghani, Hadhrami Ab and Daud, Atiqullah Mohamed and Besar, Rosli and Sani, Zamani Md and Kamaruddin, Mohd Nazeri and Syahali, Syabeela (2023) Lane detection using deep learning for rainy conditions. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15 August 2023through 16 August 2023, Kuala Lumpur.

Ghazali, Rozaimi and Ghani, Muhamad Fadli and Hanaffi, Mohd Saidi and Jaafar, Hazriq Izzuan and Soon, Chong Chee and Has, Zulfatman (2023) Real-time electro-hydraulic trajectory tracking using an optimized sliding mode control design with PID Structure. In: 5th International Conference on Control and Robotics, ICCR 2023, 23 November 2023 through 25 November 2023, Tokyo.

Goh, Kah Ong and Law, Check Yee and Tin, Cu Kang and Tee, Connie and Sek, Yong Wee (2023) Attendance management system with half-covered and full-facial recognition feature. In: 9th International Conference on Computational Science and Technology, ICCST 2022, 27 August 2022 through 28 August 2022, Johor Bahru.

Guan, Low Ming and Yakub, Fitri and Hanapiah, Ahmad Redzuan Mohd and Rahim, Muhamad Sharifuddin Abd and Azizan, Azizul and Ab Rashid, Mohd Zamzuri (2023) Water quality detection system using real time vision computing with trash collector. In: 14th IEEE Control and System Graduate Research Colloquium, ICSGRC 2023, 5 August 2023, Shah Alam.

Hadiana, Asep Id and Kamal Baharin, Safiza Suhana and Othman, Zahriah and Putra, Eddie Krishna (2023) Improving first responder preparedness in indoor evacuation through advanced numerical simulation techniques. In: 2nd International Conference on Computational Modelling, Simulation and Optimization, ICCMSO 2023, 23 June 2023 through 25 June 2023, Hybrid, Bali.

Hafizh, Hadyan and Abdullah, Rohana and Ateeq, Muhammad and Abdul Majeed, Anwar P.P. and Isaac, Matilda and Hu, Bintao (2023) Measurement and analysis of international roughness index using IoT-based system. In: 2023 IEEE Symposium on Wireless Technology and Applications, ISWTA 2023, 15 August 2023through 16 August 2023, Hybrid, Kuala Lumpur.

Halim, Mohd Firdaus Mohd Ab and Sulaiman, E. and Aziz, R. (2023) Rotating pole piece magnetic gear with low torque ripple. In: 3rd International Conference on Electrical and Electronics Engineering 2021: Versatility of Electrical and Electronics Engineering Solutions for Sustainable Future, ICON3E 2021, 6 September 2021through 7 September 2021, Virtual, Online.

Hanafi, Dirman and Salleh, Ahmad Faris and Rahman, Hisyam Abdul and Zakri, Azriyenni Azhari and Ribuan, Mohamed Najib and Ghazali, Rozaimi (2023) Portable solar panel with Mamdani fuzzy logic controller for sun position tracking and IoT monitoring system. In: 3rd International Conference on Electrical and Electronics Engineering 2021: Versatility of Electrical and Electronics Engineering Solutions for Sustainable Future, ICON3E 2021, 6 September 2021 through 7 September 2021, Virtual, Online.

Hananto, April Lia and Murtalim and Amir and Fauzi, Ahmad and Suhara, Ade and Priyatna, Bayu and Veza, Ibham and Tamaldin, Noreffendy (2023) Cascade-forward neural network (CFNN) for biomass heating value prediction. In: 2021 International Summit on Education, Technology and Humanity, ISETH 2021, 20 December 2021throughDecember 2021, Surakarta.

Haroon, Hazura and Othman, Siti Khadijah Idris and Abdul Razak, Hanim and Mukhtar, Wan Maisarah and Rahim, Hazli Rafis Abdul and Zain, Anis Suhaila Mohd (2023) Characterization of a zinc oxide coated polymer optical fiber for limonene concentration measurement. In: 9th International Conference on Engineering and Emerging Technology, ICEET 2023, 27 October 2023through 28 October 2023, Istanbul.

Hasanudin, Afif Hakim and Othman, Mohd Azlishah and Azwan, Alya Azwa and Mohd Roki, Abdul Aziz Faqruldin and Ismail, Shahira and Nugraha, Y.T. and Suhaimi, S. and Hassan, N.M. (2023) Internet of things - enabled stress surveillance when pandemic lockdown: revolutionizing resilience. In: 11th International Conference on Information Technology, ICIT 2023, 9 August 2023 through 10 August 2023, Amman.

Hendradi, Purwono and Abd Ghani, Mohd Khanapi and Mohamad, Siti Nur Mahfuzah and Aissaoui, Karima and Yudatama, Uky (2023) Review of e-learning service framework based on cloud computing. In: 3rd Borobudur International Symposium on Science and Technology 2021, 15 December 2021, Magelang.

Hendradi, Purwono and Abd Ghani, Mohd Khanapi and Mohamad, Siti Nurul Mahfuzah and Aissaoui, Karima and Yudatama, Uky (2023) Review of e-learning service framework based on cloud computing. In: 3rd Borobudur International Symposium on Science and Technology 2021, 15 December 2021, Magelang.

Hossain, A K M Zakir and Sanaullah and Azam, Md. Kayser and Ibrahimy, Muhammad Ibn (2023) Investigation on the planar resonator for fabric based chipless RFID. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15 August 2023through 16 August 2023, Kuala Lumpur.

Hossain, Jahangir and Abdul Kadir, Aida Fazliana and Shareef, Hussain and Hossain, Md. Alamgir (2023) Hybrid PV and battery system sizing for commercial buildings in Malaysia a case study of FKE-2 building in UTeM. In: IEEE Transactions on Industry Applications, 1 May 2024, Male, Maldives.

Hossain, Jahangir and Shareef, Hussain and Hossain, Md. Alamgir and Manojkumar, Rampelli and Abdullah, Qazwan and Al-Masoodi, Ahmed Hasan Hamood (2023) Optimizing battery energy storage and solar photovoltaic systems for commercial buildings in Malaysia; a case study. In: 2023 IEEE International Conference on Energy Technologies for Future Grids, ETFG 2023, 3 December 2023 through 6 December 2023, Wollongong.

Hossain, Md Hasnat and Hossain, Md Showkot and Mohd Radzi, Mohd Amran and Rahman, Saidur and Shafie, Suhaidi (2023) Preparation and performance characteristics of reduced graphene oxide-based electrolytes of vanadium redox flow battery for green energy storage. In: 6th IEEE Conference on Energy Conversion, CENCON 2023, 23 October 2023through 24 October 2023, Kuching.

Hossain, Md Showkot and Hasan, Md Akib and Mohd Said, Nurul Ain and Abd Halim, Wahidah and Jidin, Auzani (2023) Reduced device count multilevel inverter topology for renewable energy applications: a brief review. In: 6th IEEE Conference on Energy Conversion, CENCON 2023, 23 October 2023through 24 October 2023, Kuching.

Hung, Yu Ching and Lee, Yann Long and Kiat, An Ting and Wong, Ann Yee and Chia, Mei See and Cai, Jhong Yan (2023) Next-generation shopping cart design based on design methods for consumer behaviour analysis. In: International Symposium on Automation, Mechanical and Design Engineering, SAMDE 2021, 3 December 2021 through 5 December 2021, Beijing.

Hussin, Nor Hafizah and Yusof, Fadhilah and Norrulashikin, Siti Mariam (2023) A comparative study of ARIMA-GARCH model and artificial neural network model for wind speed forecasting. In: 5th ISM International Statistical Conference 2021: Statistics in the Spotlight: Navigating the New Norm, ISM 2021, 17 August 2021 through 19 August 2021, Virtual, Online.

Hussin, Siti Farah and Abdollah, Mohd Faizal and Ahmad, Ibrahim (2023) Acceptance of IoT technology for smart homes a systematic literature review. In: International Conference on Information Systems and Intelligent Applications, ICISIA 2022, 1 July 2022 through 2 July 2022, Virtual, Online.

Ikiri, Yuki and Yotsuyanagi, Hiroyuki and Ali, Fara Ashikin and Lu, Shyue-Kung and Hashizume, Masaki (2023) A DFT technique for electrical interconnect testing of circuit boards with 3D Stacked SRAM ICs. In: 12th IEEE CPMT Symposium Japan, ICSJ 2023, 15 November 2023 through 17 November 2023, Kyoto.

Iram, Lubina and Sandhu, Muhammad Y. and Hossain, A.K.M Zakir and Khan, Sanaullah (2023) Portable real time microwave milk quality monitoring sensor. In: 9th International Conference on Computer and Communication Engineering, ICCCE 2023, 15 August 2023through 16 August 2023, Kuala Lumpur.

Ishak, Anuar and Mohamad, Effendi and Arep @ Ariff, Hambali and Ito, T. (2023) An explanation of lean six sigma barriers Malaysia wastewater treatment chapter. In: 5th International Conference on Green Energy and Environment 2023 , ICoGEE 2023, 26 September 2023 through 27 September 2023, Pangkalpinang.

Ishak, Mohammad Haziq and Ramlee, Ridza Azri and Mahammad Noor, Muhammad Zulhakimi and Rusydi, M. I. (2023) Smart energy harvesting using portable pelton turbine with IoT data feedback for rural area application. In: 1st International Conference on Mechanical Engineering and Emerging Technologies, ICOMEET 2021, 3 November 2021, Padang, Virtual.

Ishak, Norshahidatul Hasana and Mohamad, Siti Nurul Mahfuzah and Syamimi, Shamsuddin and Mohamad Lutfi, Dolhalit and Aliza, Alias and Sazilah, Salam (2023) Identifying needs and problems in learning for children with autism spectrum disorder (ASD) from a technology perspective. In: 13th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2023, 20 May 2023 through 21 May 2023, Penang.

Ismail and Aini, Quratul and Maulida, Cut Rizka and Mursal and Jalil, Zulkarnain and Md Fadzullah, Siti Hajar Sheikh (2023) Thermal properties of spent coffee ground biocomposite using epoxy resin matrix. In: 11th Annual International Conference: On Sciences and Engineering, AIC 2021, 29 September 2021through 30 September 2021, Banda Aceh.

Ismail, Abdul Halim and Sunang, Godrey Amos and Azmi, Muhamad Safwan Muhamad and Ayob, Mohd Nasir and Hashim, Mohd Sani Mohamad and Basri, Hassrizal Hassan and Widyasmoro, Widyasmoro and Ismail, Mohd Muzafar (2023) Does the height matter? a case for wi-fi based wireless positioning system. In: 2023 International Workshop on Artificial Intelligence and Image Processing, IWAIIP 2023, 1 December 2023through 2 December 2023, Hybrid, Yogyakarta.

Ismail, Iszmir Nazmi and Azman, Nur Najwa Umirah Binti Nor and Roslin, Nursyadzatul Tasnim and Isa, M.R. and Zahari, N.M. and Abidin, S.Z. and Zuhdi, Ahmad Wafi Mahmood and Eqwan, M.R. and Mohamed, Hassan and Ramli, M.Z. and Mansor, M.H. and Syaifoelida, Fevi and Zakaria, A.A. and Zawawi, M.H. and Mohamad, Daud and Jaafar, M.F. and Kamarudin, Kamarulzaman and Hussin, Mohamed Saiful Firdaus (2023) Customer survey analysis for design and development of golf ball retriever prototype. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Ismail, Mohd. Farid and Wan Hamzah, Wan Azmi (2023) Performance investigation of R32 and R410a refrigerants with different compressor lubricants. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 through 5 November 2021, Virtual, Online.

Ismail, Mohd. Farid and Wan Hamzah, Wan Azmi (2023) Tribological performance effect of SiO2 and TiO2 nanoparticles as lubricating oil additives. In: 2nd Energy Security and Chemical Engineering Congress, ESChE 2021, 3 November 2021 through 5 November 2021, Virtual, Online.

Ismail, N.H. and Omar, M.N. and Ishak, M.S.A and Yahaya, N.Z. and Khalid, K.A.A. and Mohd Ab Halim, Mohd Firdaus (2023) An innovative approach for natural gas liquefaction using a mixed-multi-component-refrigerant. In: 8th International Conference on Applications and Design in Mechanical Engineering, ICADME 2023, 4 September 2023 through 5 September 2023, Kuala Lumpur.

Ismail, Shahira and Othman, Mohd Azlishah and Misran, Mohamad Harris and Meor Said, Maizatul Alice and Ja'afar, Abd Shukur and Abdul Manap, Redzuan and Nugraha, Y.T. and Hassan, N.M. and Suhaimi, S. (2023) An analysis of width feedline of ice cream cone antenna in 5G technology for internet of things (IoT) applications. In: 11th International Conference on Information Technology, ICIT 2023, 9 August 2023 through 10 August 2023, Amman.

Istiyanti, Eni and Anitasari, Dian Widi and Zainal Abidin, Nadiah (2023) The development strategy of organic rice farming in Bantul Regency, Special Region of Yogyakarta, Indonesia. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023 through 10 August 2023, Virtual, Online. (Unpublished)

Jahava, Marlina and Jali, Mohd Hafiz and Md Johari, Ashadi and Norasikin, Mohd Adili and Mohd Yusof, Haziezol Helmi and Ahmad, Aminah (2023) Optimizing scattering area of ZnO nanostructures on glass substrates platform for sensing. In: 2023 IEEE International Conference on Sensors and Nanotechnology, SENNANO 2023, 26 September 2023through 27 September 2023, Putrajaya.

Jahava, Marlina and Jali, Mohd Hafiz and Md Johari, Md Ashadi and Norashikin, Mohd Adili and Mohd Yusof, Haziezol Helmi and Ahmad, Aminah (2023) ZnO nanorods coated glass substrate based on side coupling technique for lactosesensing application. In: https://www-scopus-com.uitm.idm.oclc.org/record/display.uri?eid=2-s2.0-85187224369&origin=resultslist&sort=plf-f&src=s&sid=4ac98fe63c8bfbeede45e96c05426c2e&, 30 December 2023through 31 December 2023, Dubai.

Jamaludin, Junainah and Chin, Chee Keong and Lay, Yoon Fah and Ng, Khar Thoe and Cyril, Nelson and Pang, Yee Jiea and Kumar, Rajendra and Choong, Careemah and Anggoro, Subuh (2023) Empowering conceptual and procedural knowledge/skills development in technology-enhanced environment: Challenges and exemplars to promote innovations through digital transformation. In: 7th International Conference on Research Innovations: Trends in Science and Technology, iCRI 2022, 11 November 2022 through 12 November 2022, Penang.

Jasmi, M.S. and Fathil, M.F.M. and Arshad, M. K. Md and Nuzaihan., M. N M. and Halim, N.H.A. and Rahman, S.F.A. and Ayoib, A. and Shaifullah., A. S M. and Mat Ibrahim, Masrullizam (2023) Impact of nanogap thickness on dielectric-modulated field-effect transistor biosensor performance for uncharged biomolecules detection. In: 2023 IEEE International Conference on Sensors and Nanotechnology, SENNANO 2023, 26 September 2023through 27 September 2023, Putrajaya.

Johan, Nurul Fatiha and Shah, Hairol Nizam Mohd and Sulaiman, Marizan and Naji, Osama Abdullah Ahmed Mohammed (2023) Laser line detection for groove butt joint type based on vision system. In: 5th International Conference on Electrical, Electronic, Communication and Control Engineering, ICEECC 2022, 15 December 2021 through 16 December 2021, Johor Bahru.

Johari, Muhammad Amirul Aiman and Anwar Apandi, Nur Ilyana and Muhammad, Nor Aishah (2023) Power allocation with non-orthogonal multiple access for 5G heterogeneous network. In: 16th IEEE Malaysia International Conference on Communication, MICC 2023, 10 December 2023 through 12 December 2023, Kuala Lumpur.

Kamaludin, Khairun Najmi and Abdullah, Lokman and Syed Salim, Syed Najib Syed and Jamaludin, Zamberi and Chiew, T. H. and Kamarudin, Muhammad Nizam and Mohd Aras, Mohd Shahrieel and Rahmat, M.F. (2023) Performance evaluation of an adaptive sigmoid friction compensation for pneumatic trajectory. In: 8th International Conference on Control and Robotics Engineering, ICCRE 2023, 21 April 2023 through 23 April 2023, Niigata.

Kayser Azam, S.M. and Othman, Mohamadariff and Latef, Tarik Abdul and Illias, Hazlee Azil and Hossain, A K M Zakir and Ababneh, Ahmad A. (2023) Chipless RFID tag by v-shaped multi-resonator for partial discharge-affected equipment identification. In: 2023 Innovations in Power and Advanced Computing Technologies, i-PACT 2023, 8 December 2023 through 10 December 2023, Kuala Lumpur.

Khairunnisa, Nuha and Arifin, Zainal and Kristiawan, Budi and Mohd Rosli, Mohd Afzanizam (2023) The thermophysical properties, configurations and applications of nanofluids on solar PVT system : a review. In: 7th International Conference on Industrial, Mechanical, Electrical and Chemical Engineering 2021, ICIMECE 2021, 5 October 2021, Surakarta, Virtual.

Khalid, K.A. and Fahmi, M.I. and Nanyan, A.N. and Bohari, Zul Hasrizal (2023) PCB Rogowski coil sensor by using saw blade pattern for arcing fault detection. In: 4th International Conference on Emerging Electrical Energy, Electronics and Computing, ICE CT 2022, 28 December 2022 through 29 December 2022, Hybrid, Arau.

Khalil, Asad Y. and Rashid, Marzaini and Idris, Muhammad Idzdihar (2023) Synthesis and characterization of inorganic perovskite quantum dots (CsPbI3) based thin films for solar cells applications. In: 2023 IEEE International Conference on Sensors and Nanotechnology, SENNANO 2023, 26 September 2023through 27 September 2023, Putrajaya.

Khan, Sanaullah and Hossain, A K M Zakir and Kayser Azam, S. M. and Othman, Mohamadariff and Hassim, Nurulhalim (2023) Design Prospects of Parallel U-shaped Multi-Resonator for Fabric-based Chipless RFID Tags. In: 2023 Innovations in Power and Advanced Computing Technologies, i-PACT 2023, 8 December 2023 through 10 December 2023, Kuala Lumpur.

Khan, Sher Dali and Abbasi, Muhammad Inam and Mohd Ibrahim, Imran and Sohu, Izhar Ahmed and Khan, Sanaullah (2023) Dielectric material characterization for reflectarray antennas designed at sub-6GHz and millimeter wave bands of 5G. In: 6th IEEE Malaysia International Conference on Communication, MICC 2023, 10 December 2023 through 12 December 2023, Kuala Lumpur.

Koma'rudin, Nur' Atika and Zakaria, Zahriladha and Hassan, Nornikman and Jumidali, Mohd Manoi and Soh, Ping Jack (2023) Compact dual-layered wideband wearable monopole antenna with circular parasitic element for breast cancer detection. In: 2023 IEEE Symposium on Industrial Electronics and Applications, ISIEA 2023, 15 July 2023 through 16 July 2023, Kuala Lumpur.

Kurnianingrum, Dian and Wijaya, Andrian and Jumri, Isma Addi and Savitri, Mila Andria and Tanuar, Evawaty and Karmagatri, Mulyani (2023) Analyzing customer sentiments in genshin impact: a business intelligence perspective on player perception. In: 3rd IEEE International Conference on ICT in Business Industry and Government, ICTBIG 2023, 8 December 2023through 9 December 2023, Indore.

Law, Check Yee and Sek, Yong Wee and Tay, Choo Chuan and Goh, Wei Wei (2023) Mobile application for after school pickup solution Malaysia perspectives. In: Intelligent Systems Conference, IntelliSys 2022, 1 September 2022 through 2 September 2022, Virtual, Online.

Law, Check Yee and Sek, Yong Wee and Tay, Choo Chuan and Liew, Tze Hui (2023) School canteen food ordering application with food allergy alert feature: Malaysia perspective. In: 7th Future Technologies Conference, FTC 2022, 20 October 2022 through 21 October 2022, Vancouver.

Law, Check Yee and Sek, Yong Wee and Tay, Choo Chuan and Liew, Tze-Hui and Loh, Ya-Qin (2023) Mobile application for bidding durians. In: Proceedings of the Computing Conference 2023, 22 June 2023through 23 June 2023, London.

Lee, Wei Wen and Hashim, Mohd Ruzaini (2023) A hybrid algorithm based on artificial bee colony and artificial rabbits optimization for solving economic dispatch problem. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023, Hybrid, Shah Alam, Hybrid, Shah Alam.

Lim, T.S. and Sukiman, Muhamad Shafiq and Jasmee, Solehah and Masdzarif, Nur Diana Izzani (2023) Mechanical modelling and analysis of CMOS image sensor package. In: 25th Electronics Packaging Technology Conference, EPTC 2023, 5 December 2023through 8 December 2023, Singapore.

Lin, Lua Wei and Saealal, Muhammad Salihin and Ibrahim, Mohd Zamri (2023) Exploring 3D convolutional neural networks for enhanced detection in lung cancer classification. In: 9th IEEE Information Technology International Seminar, ITIS 2023, 18 October 2023through 20 October 2023, Batu Malang.

Loh, Wan Ying and Lee, Weng Fook and Hussin, Razaidi and Jidin, Aiman Zakwan and Ahmad, Norhawati and Zakaria, Nor Azura (2023) Novel March WY approach for dynamic fault detection in memory BIST. In: 16th IEEE International Symposium on Embedded Multicore/Many-Core Systems-on-Chip, MCSoC 2023, 18 December 2023 through 21 December 2023, Singapore.

Lubis, A.M.H.S. and Ahmadin, A. and Zainuddin, M.N.I. and Tofrowaih, Khairul Amri and Herawan, S.G. R and Rahmah, A.U. (2023) Wear preventive and friction of trans-esterified waste cooking oil enhanced zinc dialkyl dithiophospate (ZDDP). In: 2021 International Summit on Education, Technology and Humanity, ISETH 2021, 20 December 2021 through 21 December 2021, Surakarta.

Mahadzir, Muhammad Nadzirul Izzat and Halim, Isa and Zainal Abidin, Muhammad Zaimi and Abdullah, Zulkeflee and Radin Umar, Zaid @ Radin Zaid and Abdul Rahman, Muhammad Husna and Kasim, M.S. (2023) Design and fabrication of test rig for static pushing and pulling experiments. In: 8th International Conference on Applications and Design in Mechanical Engineering, ICADME 2023, 4 September 2023 through 5 September 2023, Kuala Lumpur.

Maidin, Shajahan and Harhara, Sohaib Mohammed Nasser (2023) Analytic hierarchy process to determine process parameters for optimal surface finish and dimensional accuracy. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021through 26 August 2021, Virtual, Online.

Manan, K.E. and Yakub, F. and Ab Rashid, Mohd Zamzuri and Ahmad, M.A. and Minhat, M.S. (2023) Reactor protection system conceptual design for Triga Puspati reactor using LabVIEW software. In: 1st International Postgraduate Conference on Ocean Engineering Technology and Informatics 2021, IPCOETI 2021, 21 June 2021through 22 June 2021, Virtual, Online.

Mazlan, Azlimi and Ahmad, Ibrahim and Salam, Sazilah (2023) A systematic literature review in gamification implementation and game elements in Malaysia education. In: 13th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2023, 20 May 2023 through 21 May 2023, Penang.

Mid, E.C. and Mukhtar, N.M. and Syed Yunus, S.H. and Abdul Hadi, Dayanasari and Ruslan, Eliyana (2023) Explicit solution of parameter estimate using multiparametric programming for boost converter. In: 4th International Conference on Emerging Electrical Energy, Electronics and Computing, ICE4CT 2022, 28 December 2022 through 29 December 2022, Hybrid, Arau.

Mizar, Muhammad Alfian and Nasir, Mohd Zakaria Mohammad and Trifiananto, Muhammad and Hardiatama, Intan (2023) Design and performance test of multi intake foods product cutting machine. In: 2nd International Conference on Bioenergy and Environmentally Sustainable Agriculture Technology, ICoN BEAT 2021, 28 July 2021through 29 July 2021, Virtual.

Mohamad, Noraiham and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Ghani, Mohd Sharin and Rahim, Nor Hidayah and Mohd Isa, Mohd Hanafiah and Che Halin, Dewi Suriyani and Shueb, Mohammed Iqbal and Ismail, Norshafarina (2023) Tensile and dielectric properties of tin dioxide reinforced deproteinized natural rubber nanocomposites for electrical insulator. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Mohamad, Noraiham and Abd Ghani, Anis Aqilah and Anen, Marvrick Anak and Abd Razak, Jeefferie and Raja Abdullah, Raja Izamshah and Mohd Ali, Mohd Amran and Ab Maulod, Hairul Effendy and Se, Sian Meng (2023) Optimization of recycled polypropylene concrete aggregates processing using water-assisted melt compounding via response surface methodology. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Mohamad Ali, Ummu Umairah and Md Johari, Md Ashadi and Jusoh, Zulzilawati and Harun, Sulaiman Wadi (2023) Single and dual optical microsphere resonator as Humidity Sensor. In: 6th Photonics Meeting 2023 , PM 2023, 10 June 2023 through 11 June 2023, Kuala Terengganu.

Mohamad Juoi, Jariah and Yusuf, Yusliza and Mohd Rosli, Zulkifli and Mustafa, Nuzaimah and Wan Zulkifli, Wan Amirul Shafiz and Abdul Aziz, Fariha Awatif and Abd. Wahab, Nur Umairah Afifah (2023) Recycling of glazed roof tile waste for fine aggregate in green concrete. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Mohamed Kassim, Anuar and Jamri, Mohd Saifuzam and Mohd Aras, Mohd Shahrieel and Ab Wahab, Norfariza and Jaya, A.K.R.A. and Yasuno, Takashi (2023) Development of unmanned surface vehicle with real-time water quality monitoring system. In: 3rd International Conference on Computing and Information Technology, ICCIT 2023, 13 September 2023 through 14 September 2023, Tabuk.

Mohamed Saiful Firdaus, Hussin and Idris, M.I. and Abdullah, H.Z. and Azlan, Khairul Azri and Mohamad, Effendi (2023) Worldwide trends on hydroxyapatite from animal waste for biomedical applications - a bibliometric analysis (2012-2022). In: 5th International Conference on Green Energy and Environment 2023, ICoGEE 2023, 26 September 2023through 27 September 2023, Pangkalpinang.

Mohd Asri, Fatin Atirah and Ayob, Mohammad Afif and Rohaziat, Nurasyeera and Rahman, Hisyam Abdul and Rahman, Khairul Azlan A. and Ayob, Mohd Erdi (2023) Development of an open-source and low-cost robotic arm based on STM32 microcontroller for promoting STEM education. In: 2023 IEEE Symposium on Computers and Informatics, ISCI 2023, 14 October 2023 through 15 October 2023, Hybrid, Shah Alam.

Mohd Noh, Faridah Hanim and Wan Kamri, Wan Mohd Amin Khalili and Zakaria, Ahmad Hawari and Gimin, Nor Arina and Iqbal, Safa'at and Yaakub, Muhamad Faizal and Mohd Shah, Nor Shahida and Mashori, Sumaiya (2023) Development of physiological mouse for anxiety disorder identification system. In: 12th International Conference on Mechanical and Manufacturing Engineering 2022 , ICME 2022, 9 August 2022 through 10 August 2022, Virtual, Online.

Mohd Nor Azami, Mohd Adzimnuddin and Abd Aziz, Mohamad Zoinol Abidin and Ja'afar, Abd Shukur (2023) Analyzing the impact of various geometries on tri-band antenna performance. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Mohd Nor Azami, Mohd Adzimnuddin and Abd Aziz, Mohamad Zoinol Abidin and Ja'afar, Abd Shukur (2023) Enhanced resonance and bandwidth performance of triband antenna through bending effect. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Mohd Rosli, Zulkifli and Layu, Elsee and Wan Zulkifli, Wan Amirul Shafiz and Mohamad Juoi, Jariah and Abdul Aziz, Fariha Awatif and Jumaidin, Ridhwan (2023) Investigating the mechanical performance of new green concrete based on unglazed fired roof tile waste. In: Green Materials and Electronic Packaging Interconnect Technology Symposium, EPITS 2022, 14 September 2022 through 15 September 2022, Langkawi.

Mohd Sa'at, Fatimah Al-Zahrah and Hasbullah, Nurjannah and Shikh Anuar, Fadhilah and Johari, Dahlia (2023) Heat transfer comparison between the one-directional and the bi-directional flows across heated tube banks with staggered configuration. In: 14th International Conference on Thermal Engineering: Theory and Applications, ICTEA 2023, 25 May 2023 through 27 May 2023, Yalova.

Mohd Tumari, Mohd Zaidi Mohd and Mustapha, Nik Mohd Zaitul Akmal and Ahmad, Mohd Ashraf and Saat, Shahrizal and Ghazali, Mohd Riduwan (2023) Liquid slosh suppression by implementing data-driven fractional order pid controller based on marine predators algorithm. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023, 17 June 2023, Hybrid, Shah Alam.

Mohd Zain, Aiza Azrin and Ariffin, Halimaton Sa'adiah and Yusop, Noorrezam and Tajuddin, Nur Ilyana Ismarau and Abd Rahman, Nurasyikin and Togin, Siti Khadijah (2023) I-BIODIVERSITY WITH INAQ (I-BIODI) : E-LEARNING PLATFORM FOR FOUNDATION STUDENTS IN UNIVERSITI SAINS ISLAM MALAYSIA. In: Seminar Antarabangsa Islam dan Sains (SAIS 2023), Medina, SAUDI ARABIA. (Submitted)

Mohd Zaki, Sharif and Azmi, W.H. and Ismail, Mohd. Farid and Awalludin, M.M.N. and Ghazali, M.F. and Amirullah, A.R.M. (2023) Performance analysis of automotive air conditioning systems with electric compressors using R1234yf refrigerant: Insights into power consumption, cooling capacity, and energy efficiency. In: 5th International Conference on Green Energy and Environment 2023 , ICoGEE 2023, 26 September 2023 through 27 September 2023, Pangkalpinang.

Mokhtar, Nur Hazwani and Hamzah, Luqman Hakim and Che Mamat, Husni and Mohammad Nasir, Mohd Zakaria and Mamat, Mohd Fauzi (2023) Decreasing the rate of motorcycle accidents in Malaysia: analytical hierarchy process approach. In: 3rd Symposium on Industrial Science and Technology, SISTEC 2021, 25 August 2021through 26 August 2021, Pahang, Virtual.

Morimoto, Takeshi and Ahmad, Mohd Riduan and Baharuddin, Mohd Zafri and Wang, Daohong and Yamamoto, Kazuo and Kudo, Takeshi and Kahtani, Ammar Nasser Al and Aziz, Mohamad Zoinol Abidin Abd and Akita, Manabu and Takayanagi, Yuji and Kawasaki, Zen-Ichiro and Torii, Tatsuo (2023) Real-time lightning 3D imaging and forecasting project in Malaysia for sustainable and reliable supply of energy and storm disaster early warning. In: 12th Asia-Pacific International Conference on Lightning, APL 2023, 12 June 2023 through 15 June 2023, Langkawi.

Mubarok, Sukri and Puspitasari, Poppy and Andoko, Andoko and Lubis, Abdul Munir Hidayat Syah and Permanasari, Avita Ayu and Abdullah, Muhammad Ilman Hakimi Chua (2023) Failure mechanism on Ti-6Al-4V material processed using Selective Laser Melting (SLM). In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9 August 2022 through 10 August 2022, Kuala Lumpur.

Muniandy, Moviyndiran and Mustapa, Mohammad Sukri and Ali, Nurdin and Siswanto, Waluyo Adi and Rashid, Azrin Hani Abdul and Masirin, Mohd Idrus Mohd and Wahab, Norfariza Ab and Yaakob, Mohd Yuhazri and Mansor, Mohamad Norani and Wagiman, Abdullah (2023) A review on the tensile properties of bamboo fiber treatments. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021through 26 August 2021, Virtual, Online.

Najib, Suhaila Mohd and Mirin, Siti Nur Suhaila and Harman, Ahmad Irfan and Mohd Rahimi, Muhammad Qarl Farisz and Rahim, Muhammad Daniel and Azhari, Nurnajihah Hazirah and Khang, Adam Wong Yoon (2023) Road hazard detection for the motorcycle based on efficientnet-lite0. In: 13th IEEE Symposium on Computer Applications and Industrial Electronics, ISCAIE 2023, 20 May 2023through 21 May 2023, Penang.

Ng, X. H. and Bakar, R.A. and Kadirgama, Kumaran and Subramonian, Sivarao and Ramasamy, Devarajan and Samykano, Mahendran (2023) The performance of beta type stirling engine using different fuel. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Noordin, Aminurrashid and Basri, Mohd Ariffanan Mohd and Mohamed, Zaharuddin and Lazim, Izzuddin Mat (2023) Position and attitude control of MAV quadrotor using super twisting sliding mode control. In: 5th International Conference on Electrical, Electronic, Communication and Control Engineering, ICEECC 2021, 15 December 202 1through 16 December 2021, Johor Bahru.

Nor Azli, Mohamad Nor Azhari and Hariri, Azian and Chong, Zi Yao and Khasri, Muhammad Aidil and Muhamad Damanhuri, Amir Abdullah and Syazwan Mustafa, Mohd Syafiq and Kabrein, Hashim (2023) Influence of air velocity on thermal comfort and performance of students in naturally ventilated classrooms in tropical climate. In: 11th International Conference on Indoor Air Quality, Ventilation and Energy Conservation in Buildings, IAQVE C2023, 20 May 2023 through 23 May 2023, Tokyo.

Norddin, Nurbahirah and Shafie, Suhaidi and Idris, Muhammad Idzdihar and Liu, Xinzhi and Lawal, Ismail and Rummaja, Mohd Iskandar Dzulkarnain M. and Abdul Aziz, Ahmad Muhajer and Nor, Rozilawati Mohd (2023) Performance comparison of different electron transport layer for perovskite solar cell with NiO as hole transport layer using SCAPS 1D. In: 8th IEEE International Conference on Recent Advances and Innovations in Engineering, ICRAIE 2023, 2 December 2023through 3 December 2023, Kuala Lumpur.

Nordin, Mohd Nur Azmi and Mustafa, Zaleha and Ratanawilai, T. (2023) Effect of water ageing on fatigue damage of rubberwood/recycled polypropylene composites. In: 23rd International Conference on Composite Materials, ICCM 2023, 30 July 2023through 4 August 2023, Belfast.

Omar, Siti Sarah and Mohd Aris, Nurul Fadzilla and Yen, Wendy Teoh Ming and Chao, Dorrie and Higgs, Malcolm (2023) Exploratory study of multidimensionality elements of small entrepreneurs' network change and development in the southern region of Malaysia. In: 2023 18th European Conference on Innovation and Entrepreneurship, ECIE 2023, 21 September 2023 through 22 September 2023, Porto.

Othman, A. and Majid, H.A. and Al-Fadhali, N. and Shairi, Noor Azwan and Zolkefli, Amirul Aizat and Abidin, Z.Z. and Mohd Ibrahim, Imran and Zakaria, Zahriladha (2023) High isolation of mm-wave T-R switch design using open loop square ring DGS. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Othman, A. and Majid, H.A. and Al-Fadhali, Najib and Shairi, Noor Azwan and Zobilah, A.M. (2023) A mm-wave T-R RF switch incorporated with CSRR switchable DGS for 5G application. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Othman, Mohd Azlishah and Adnan, Nur Saqirah and Misran, Mohamad Harris and Said, Maizatul Alice Meor and Jaafar, Abd Shukur and Abd Manap, Redzuan and Suhaimi, Shadia and Hassan, Nurmala Irdawaty (2023) Design and analysis of a dual-band quad-ridge horn antenna using 3D printing and PLA for wireless communication enhancement performance. In: 3rd International Conference on “Emerging Trends and Technologies on Intelligent Systems” (ETTIS-2023), 23 February 2023through 24 February 2023, Noida.

Othman, Mohd Azlishah and Jaafar, Abd Shukur and Manap, Redzuan Abd and Misran, Mohamad Harris and Said, Maizatul Alice Meor and Suhaimi, Shadia and Hassan, Nurmala Irdawaty (2023) Next-gen 5G antenna: antipodal vivaldi antenna using ferro A6s for enhanced performance at 60 GHz. In: 3rd International Conference on “Emerging Trends and Technologies on Intelligent Systems” (ETTIS-2023), 23 February 2023through 24 February 2023, Noida.

Othman, Norfaridatul Akmaliah and Alamsyah, Doni Purnama and Siswanto, Boby and Morika, Doni and Wijaya, Billiam Christofer and Adinda, Putri Giyan (2023) Exploring the relatedness of educational technology in enhancing study performance. In: 8th International Conference on Information Management and Technology, ICIMTech 2023, 24 August 2023through 25 August 2023, Malang.

Othman, Nur Amirah and Zainuddin, Hidayat and Yahaya, Muhammad Sharil and Azis, N. and Ibrahim, Zulkifli and Musni, M.A.C. (2023) Evaluation of total acid number (TAN) of synthetic ester retrofilled oil and its correlation with FTIR spectroscopy. In: 4th International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2023, 6 August 2023through 10 August 2023, Denpasar Bali.

Othman, Nur Amirah and Zainuddin, Hidayat and Yahaya, Muhammad Sharil and Azis, N. and Ibrahim, Zulkifli and Musni, M.A.C. (2023) UV-vis spectra and moisture content of retrofilled aged mineral oil with synthetic ester. In: 3rd IEEE International Conference in Power Engineering Applications, ICPEA 2023, 6 March 2023through 7 March 2023, Virtual, Online.

Palagud, Jose and Lim, T.S. and Jasmee, Solehah and Masdzarif, Nur Diana Izzani and Wang, S.W. and Hoo, K.I. and Omar, Ghazali (2023) Analysis on bonding wires of Au-Coated Ag alloy for IBGA automotive application. In: 25th Electronics Packaging Technology Conference, EPTC 2023, 5 December 2023through 8 December 2023, Singapore.

Poo, Jeckey Ng Kah and Saealal, Muhammad Salihin and Ibrahim, Mohd Zamri and Yakno, Marlina (2023) Leveraging u-net architecture for accurate localization in brain tumor segmentation. In: 9th IEEE Information Technology International Seminar, ITIS 2023, 18 October 2023through 20 October 2023, Batu Malang.

Pratondo, Agus and Novianty, Astri and Pudjoatmodjo, Bambang (2023) Prediction of payment method in convenience stores using machine learning. In: 11th IEEE Conference on Systems, Process and Control, ICSPC 2023, 16 December 2023, Malacca.

Pratondo, Agus and Zani, Tafta and Novianty, Astri and Pudjoatmodjo, Bambang (2023) Raw coffee bean classification for roasting suitability assessment using transfer learning. In: 11th IEEE Conference on Systems, Process and Control, ICSPC 2023, 16 December 2023, Malacca.

Puspitasari, Poppy and Pramono, Diki Dwi and Putra, Chandra Setiawan and Permanasari, Avita Ayu and Hidayat Syah Lubis, Abdul Munir and Abdullah, Muhammad Ilman Hakimi Chua (2023) Optimization of performance carbon-based nanolubricant on Ti6Al4V Pin on disc testing using taguchi method. In: 8th International Conference on Electrical, Electronics and Information Engineering, ICEEIE 2023, 28 September 2023 through 29 September 2023, Malang City.

Puspitasari, Poppy and Wardana, Muhammad Raffli Putra and Pramono, Diki Dwi and Lubis, Abdul Munir and Permanasari, Avita Ayu and Abdullah, Muhammad Ilman Hakimi Chua and Risdanareni, Puput (2023) Tribology properties of titanium alloy (Ti-6Al-4V) at various temperature on α/β solution treatment and aging condition. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022, 9 August 2022 through 10 August 2022, Kuala Lumpur.

Qureshi, Suhail Asghar and Kamarudin, Muhammad Ramlee and Abbasi, Muhammad Inam and Abidin, Zuhairiah Zainal and Dahri, Muhammad Hashim (2023) VO-2 assisted unit cell for designing THz reconfigurable Reflectarray antenna. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023 through 2 November 2023, Kuala Lumpur.

Qureshi, Suhail Asghar and Kamarudin, Muhammad Ramlee and Abbasi, Muhammad Inam and Abidin, Zuhairiah Zainal and Dahri, Muhammad Hashim and Ashyap, Adel Yahya Isa and Ramli, Nordin (2023) VO2-based switchable transmit-reflect-array for THz applications. In: 2023 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, AP-S/URSI 2023, 23 July 2023through 28 July 2023, Portland.

Rahayu, Lestari and Wijaya, Oki and Syaputra, Rino and Robani, Anidah (2023) Food security and welfare of red rice farmers on dry land in Ponjong district, Gunungkidul regency. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Rahim, Norafni Farlina (2023) Rapid scoping review of blockchain adoption in halal industry supply chain. In: 11th International Conference on Applied Science and Technology 2022, ICAST 2022, 13 June 2022 through 14 June 2022, Hybrid, Putrajaya.

Rahim, Norin Hafizah and Onn, Munirah and Rahim, Nor Hidayah and Sabri, Nurul Hazwani and Hambali, Norhafini (2023) Physical characterization of effective microorganism (em) paint on anti-corrosion. In: 2nd International Conference on Oil and Gas Industry, Technologies, and Applications, ICOG-ITA 2022, 14 September 2022, Virtual, Online.

Rahman, Muhamad Arfauz A and Lin, Chengsi and Maropoulus, Paul G and Teoh, Woei Sheng and Rahman, Azrul Azwan Abdul and Mohamad, Effendi (2023) Design and validation of an automation strategy for the strip test process in the semiconductor industry. In: 2023 International Conference on Robotics and Automation in Industry, ICRAI 2023, 3 March 2023through 5 March 2023, Peshawar.

Rahman, Muhamad Arfauz A and Shikder, Kaafi N. and Maropoulos, Paul G. and Mohamad, Effendi and Rahman, Azrul Azwan Abdul and Salleh, Mohd Rizal (2023) Configuration tool for generating multi-type and multi-robot work cell layout. In: 2023 International Conference on Robotics and Automation in Industry, ICRAI 2023, 3 March 2023through 5 March 2023, Peshawar.

Rahmawati, Nur and Yogatama, Candra and Winahyu, Wulansari and Kasim, Anisah (2023) Production risk analysis for organic cabbage farming in Semarang district, Central Java. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Ramadhanti,, Darin and Larasati, Aisyah and Muid, Abdul and Mohamad, Effendi (2023) Building customer churn prediction models in Indonesian telecommunication company using decision tree algorithm. In: 7th International Conference on Science and Technology, ICST 2021, 7 September 2021through 8 September 2021, Yogyakarta.

Ramlee, N.A. and Ahmad, N.A. and Esa, M.R.M. and Baharudin, Zikri Abadi (2023) Frequency analysis on pulse train of lightning discharge observed in Malacca, Malaysia. In: 4th International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2023, 6 August 2023through 10 August 2023, Denpasar Bali.

Razak, Hanim Abdul and Haroon, Hazura and Yusop, Yusmarnita and Zain, Anis Suhaila Mohd and Rahim, Hazli Rafis Abdul and Ghafar, Ahmad Mubasyir Abdul (2023) Performance of fiber optic sensors based on waist enlarged tapers for solubility of naringin in water. In: 9th International Conference on Engineering and Emerging Technology, ICEET 2023, 27 October 2023through 28 October 2023, Istanbul.

Razak, Tajul Rosli and Jarimi, Hasila and Ahmad, Emy Zairah (2023) Simplified artificial neural network configuration in R programming for predictive modelling. In: 8th IEEE International Conference on Recent Advances and Innovations in Engineering, ICRAIE 2023, 2 December 2023through 3 December 2023, Kuala Lumpur.

Razi, Atikah and Hidayat, M. Nabil and Jidin, Auzani and Shukor, Syahar Azali Ab and Noor, S.Z.M. (2023) A new MBC-TSI topology for microinverter PV application. In: 3rd IEEE International Conference in Power Engineering Applications, ICPEA 2023, 6 March 2023through 7 March 2023, Virtual, Online.

Razif, Nur Rafiqah Abdul and Shabri, Ani (2023) Application of empirical mode decomposition in improving group method of data handling. In: 5th ISM International Statistical Conference : Statistics in the Spotlight: Navigating the New Norm, ISM, 17 August 2021through 19 August 2021, Virtual, Online.

Relawati, Rahayu and Ariadi, Bambang Yudi and Prabowo, Bambang Hadi and Khan, Waris Ali and Kamarudin, Mohd Fauzi (2023) Mapping the agribusiness potency of chicken eggs in Indonesia: the base sector analysis. In: 2nd International Conference on Bioenergy and Environmentally Sustainable Agriculture Technology, ICoN BEAT 2021, 28 July 2021through 29 July 2021, Virtual.

Risvansuna Fivintari, Francy and Ayu Rachmasari, Farida and Iriani Ekawati, Francy and Rina Kamardiani, Diah and Robani, Anidah (2023) Red chilli farming on beach sand and rice land with various irrigation systems in Bantul. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Rosli, Nor Ana and Alkahari, Mohd Rizal and Mohamad Norani, Mohamad Nordin and Abdollah, Mohd Fadzli bin and Paijan, Lailatul Harina and Furumoto, T (2023) Evaluation on the performance of sustainable wire arc additive manufacturing using micro plasma arc welding. In: 5th International Conference on Green Energy and Environment 2023 , ICoGEE 2023, 26 September 2023 through 27 September 2023, Pangkalpinang.

Rozaki, Zuhud and Barnabas, Tearine and Triyono, Triyono and Kamarudin, Mohd Fauzi and Ariffin, Ahmad Shabudin and Ramli, Mona Fairuz (2023) Agrotourism development strategy during and post Covid-19 pandemic findings from Caping Merapi, Indonesia and Tobwakira Farm, Kiribati. In: 1st International Conference on Environment and Smart Society, ICEnSO 2023, 9 August 2023 through 10 August 2023, Yogyakarta.

Saad, Norhashimah Mohd and Zawawi, Tengku Nor Shuhada Tengku and Abdullah, Abdul Rahim and Sudirman, Rubita (2023) Electromyography features information based on functional range of motion for health screening program. In: 16th International Conference on Advanced Technologies for Communications, ATC 2023, 19 October 2023through 21 October 2023, Da Nang.

Saadun, Mohd Noor Asril and Che Sidik, Nor Azwadi and Xian, Teng Meng and Mohd Rosli, Mohd Afzanizam (2023) Numerical studies for small-scale solar chimney power plants with various geometric configurations. In: 6th International Conference on Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Saari, Haziah and Amin, MohdRushidi Mohd and Saleh Abbas, Mohd and Ismail, Albert Feisal @ Muhd Feisal and Haris Fadzilah, Asmaul Husna and Nordin, Mohd Norazmi (2023) Transforming industrial operations with blockchain: the healthcare application health-chain. In: 3rd International Conference on Advance Computing and Innovative Technologies in Engineering, ICACITE 2023, 12 May 2023through 13 May 2023, Greater Noida.

Saat, Shahrizal and Ghazali, Mohd Riduwan and Ahmad, Mohd Ashraf and Mustapha, Nik Mohd Zaitul Akmal and Tumari, Mohd Zaidi Mohd (2023) An implementation of brain emotional learning based intelligent controller for AVR system. In: 2023 IEEE International Conference on Automatic Control and Intelligent Systems, I2CACIS 2023, 17 June 2023, Hybrid, Shah Alam.

Saealal, Muhammad Salihin and Ibrahim, Mohd Zamri and Shapiai, Mohd Ibrahim and Fadilah, Norasyikin (2023) In-the-wild deepfake detection using adaptable CNN models with visual class activation mapping for improved accuracy. In: 5th International Conference on Computer Communication and the Internet, ICCCI 2023, 23 June 2023 through 25 June 2023, Fujisawa.

Sahroni, T.R. and Ahmad, Saifol Anuar and Akmal, Suriati (2023) Thermal expansion flow analysis in designing a sustainability computer personal unit casing. In: 6th International Conference on Eco Engineering Development 2022, ICEED 2022, 16 November 2022 through 17 November 2022, Virtual, Online.

Samranmak, Pongsiri and Salim, Mohd Azli and Photong, Chonlatee (2023) Effects of electric motor speed and direction of a horizontal rotary dyeing machine on indigo dyeing quality and performances. In: 2023 International Conference on Power, Energy and Innovations, ICPEI 2023, 18 October 2023through 20 October 2023, Phrachuap Khirikhan.

Sazli, Muhammad Alif Syafiq and Ab Wahab, Norfariza and Nasir, Nur Syuhada and Vikanesh, Venu and Mustapa, Mohammad Sukri (2023) Influence of micro drilling parameters towards tool wear on carbon fiber reinforced polymers (CFRP) panel. In: 11th International Conference on Mechanical and Manufacturing Engineering 2021, ICME 2021, 25 August 2021 through 26 August 2021, Virtual, Online.

Seng, Chan Hwa and Abas, Norafizah and Kasdirin, Hyreil Anuar and Abas, Mohd Azman and Ghani, Normaniha Abd and Hanafi, Ainain Nur (2023) EMG-based assessment device for hand rehabilitation with cloud analysis. In: 12th IEEE International Conference on Control, Automation and Information Sciences, ICCAIS 2023, 27 November 2023 through 29 November 2023, Hanoi.

Shkarupylo, Vadym and Blinov, Ihor V. and Dusheba, Valentyna and Alsayaydeh, Jamil Abedalrahim Jamil (2023) Case driven TLC model checker analysis in energy scenario. In: 6th International Workshop on Computer Modeling and Intelligent Systems, CMIS 2023, 3 May 2023, Zaporizhzhia.

Singh, Onkar and Singh, Koushlendra Kumar and Das, Saikat and Akbari, Akbar Sheikh and Abd Manap, Nurulfajar (2023) Classification of lung cancer from histopathology Images using a deep ensemble classifier. In: 2023 IEEE International Conference on Imaging Systems and Techniques, IST 2023, 17 October 2023through 19 October 2023, Copenhagen.

Siswanto, Boby and Alamsyah, Doni Purnama and Morika, Doni and Othman, Norfaridatul Akmaliah and Wijaya, Billiam Christofer and Adinda, Putri Giyan (2023) E-Learning Satisfaction Analysis of the Support Factors. In: 10th International Conference on Information Technology, Computer, and Electrical Engineering, ICITACEE 2023, 31 August 2023 through 1 September 2023, Virtual, Online.

Sivarao, Subramonian and Prasath, K.P. and Ramesh, S. and Kadirgama, Kumaran and Pujari, S. and Vatesh, Umesh Kumar and Salleh, Mohd Shukor and Ali, Mohd Amran and Maidin, Shajahan (2023) Modelling of surface roughness for glass-assisted co2 laser machined p-type silicon wafer. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan.

Sohoo, Arslan A. and Ahmed, Izhar and Seman, Fauziahanim Che and Ishak, Nurul Syafeeqa and Khee, Yee S. (2023) Leaky-wave wires antenna for future D- Band 6G communication systems. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023 through 2 November 2023, Kuala Lumpur.

Srisuma, V. and Gurumoorthy, Sasikumar and S. M. M Yassin, S. M. Warusia Mohamed and MacHerla, Sivudu and Naik, Ashitha V (2023) A collective machine learning and deep learning prototypical to expect diabetic retinopathy. In: 2023 IEEE International Conference on Integrated Circuits and Communication Systems, ICICACS 2023, 24 February 2023 through 25 February 2023, Virtual, Online.

Sriyadi and Aulina, Finka and Hanifah, Nurul and Hamdzah, Nor Lailatul Azilah (2023) Perceptions of farmer group members towards the implementation of the vegetable alley in Yogyakarta city. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Sriyadi and Hanifah, Nurul and Heri Isnawan, Bambang and Budiarto and Wan Ibrahim, Nik Rahila (2023) Efficient production factors taking into account the risks in shallot: case study in Nawungan Village, Imogiri district, bantul regency, DIY. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Subramaniam, Sree Aran and Asan, Noor Badariah and Asli, Muhammad Azwan Faiz and Augustine, Robin (2023) Graphene-based antenna: enabling fat-intrabody communication at 2.45 GHz ISM band. In: 2023 IEEE International Symposium on Antennas and Propagation, ISAP 2023, 30 October 2023through 2 November 2023, Kuala Lumpur.

Subramonian, Sivarao and Prasath, K.P. and Ramesh, S. and Kadirgama, Kumaran and Salleh, Mohd Shukor and Ali, Mohd Amran and Maidin, Shajahan and David, Thevaneyan Krishta (2023) Rooted guardrail post design - an improvement towards reducing run-off-road catastrophic accidents. In: 8th Brunei International Conference on Engineering and Technology 2021, BICET 2021, 8 November 2021 through 10 November 2021, Bandar Seri Begawan, Brunei Darussalam.

Suhaimi, Mohamed Aidil and Mat Tokit, Ernie and Mohd Sa'at, Fatimah Al-Zahrah and Mohd Rosli, Mohd Afzanizam and Herawan, S. G. and Oktarina, R. and Setyandito, O. (2023) Preliminary theoretical design of crossflow water turbine for rainwater rooftop harvesting system. In: 6th International Conference on Clean Energy and Technology 2023, CEAT 2023, 7 June 2023through 8 June 2023, Hybrid, Penang.

Suhairi, R. and Raja Othman, Raja Nor Firdaus Kashfi and Md Zuki, Nor Aishah and Asyraaf, R.M. and Dezfouli, M.M.S. and Kadir, K.A. (2023) Performance characteristic of double stator slotted rotor permanent magnet motor. In: 2023 International Conference on Engineering Technology and Technopreneurship, ICE2T 2023, 15 August 2023through 16 August 2023, Kuala Lumpur.

Suid, Mohd Helmi and Ahmad, Mohd Ashraf and Ahmad, Salmiah and Ghazali, Mohd Riduwan and Tumari, Zaidi Mohd (2023) Optimal model order reduction based on hybridization of adaptive safe experimentation dynamics-nonlinear sine cosine algorithm. In: 2023 International Conference on System Science and Engineering, ICSSE 2023, 27 August 2023 through 28 August 2023, Virtual, Ho Chi Minh City.

Sulaiman, Hamdan and Yusof, Ahmad Anas and Mohamed Nor, Mohd Khairi (2023) The correlation between peltier module, solution volume and temperature in iot-controlled hydroponic nutrient solution management. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2022, 20 July 2022through 20 July 2022, Pekan.

Sule, Ahmed and Latiff, Zulkarnain Abdul and Abbas, Mohammed Azman and Veza, Ibham (2023) Particulate matter and nitrogen oxide emissions prediction using artificial neural network for diesel engine running on biodiesel-diesel fuel with nano-additive. In: 2021 International Summit on Education, Technology and Humanity, ISETH 2021, 20 December 2021through 21 December 2021, Surakarta.

Sun, Fayou and Ngo, Hea Choon and Yu, Yelan and Xiao, Zhengyu and Meng, Zuqiang (2023) Adopting multiple vision transformer layers for fine-grained image representation. In: 1st International Conference on Computer Technology and Information Science, CTIS 2023, 17 June 2023through 18 June 2023, Virtual, Online.

Sunaryo, Budi and Rusdi, Jack Febrian and Salam, Sazilah and Abu, Nor Azman and Sabar, Muhamad and Agustina, Nova (2023) Tracking technology for tourist behavior. In: 6th Engineering Science and Technology International Conference: Applied Technology for Sustainable Development, ESTIC 2021, 27 October 2021, Padang, Virtual.

Sundi, Syahrul Azwan and Izamshah, Raja and Kasim, Mohd Shahir and Othman, Intan Sharhida and Raffay, Mohamad Razly (2023) Surface roughness analysis of five-axis flank milling strategies for slanted thin-walled pocketing: aerospace part. In: 6th International Conference in Mechanical Engineering Research, ICMER 2021, 26 October 2021 through 27 October 2021, Virtual, Online.

Susanawati and Endang, Ayu Fitria and Diah, Rina Kamardiani and Zainal Abidin, Nadiah (2023) Price fluctuation and vertical market integration of shallots in the production center of central Java Indonesia. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Susanti, Leni and Alamsyah, Doni Purnama and Hariyanto, Oda I. B. and Othman, Norfaridatul Akmaliah (2023) Exploring students' perceptions of individual performance in online learning. In: 2023 International Conference on IoT, Communication and Automation Technology, ICICAT 2023, 23 June 2023through 24 June 2023, Gorakhpur.

Susanti, Leni and Alamsyah, Doni Purnama and Othman, Norfaridatul Akmaliah (2023) Toward an E-learning adoption: Sustainable technology used. In: 2022 4th International Conference on Sustainable Manufacturing, Materials and Technologies, ICSMMT 2022, 11 June 2022 through 12 June 2022, Coimbatore.

Suyatna, I PutuNgurah and Mohamed, Yusaini Hisham and Abbas, Mohd Saleh and Ismail, Albert Feisal and Magiman, Mohamad Maulana and Yunus, YusmiMohd (2023) The emergence and challenges of blockchain technology in business and IoT applications. In: 3rd International Conference on Advance Computing and Innovative Technologies in Engineering, ICACITE 2023, 12 May 2023through 13 May 2023, Greater Noida.

Syazwan, M.M.S. and Yusop, F and Saad, M.S. and Sari, K.A. Mohd and Muhamad Damanhuri, Amir Abdullah and Hassan, N.N. Mat and Fahmi, A.R. (2023) Identification of competency supervisor and technician heating ventilating and air conditioning (HVAC) maintenance in oil and gas industry Malaysia. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, Virtual, Online.

Tangdee, Patsakorn and Uthathip, Narongkorn and Thongsan, Taweesak and Lertlam, Krit and Salim, Mohd Azli and Photong, Chonlatee (2023) An improved sun drying for andrographis paniculata using PTFE with exhaust revolutionary air system. In: 2023 International Electrical Engineering Congress, iEECON 2023, 8 March 2023through 10 March 2023, Krabi.

Tee, Boon Tuan and Lim, S.C.J. and Siew, P.W. and Lee, M.F. (2023) Application of sensor technology for energy consumption analysis; a case study in a smart office building. In: 2023 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2023, 18 December 2023 through 21 December 2023, Singapore.

Thong, Li Wah and Kok, Swee Leong and Ramlan, Roszaidi (2023) Modeling and analysis of electrical circuit connections in the piezoelectric cantilever array for vibration energy harvester. In: 2023 IEEE International Conference on Environment and Electrical Engineering and 2023 IEEE Industrial and Commercial Power Systems Europe, EEEIC / I and CPS Europe 2023, 6 June 2023 through 9 June 2023, Madrid.

Triyono and Al Uth Aini, Toha and Nur Mila, Amalia and Kamrudin, Mohd Fauzi and Mamnuah (2023) Optimization of production factors in organic rice farming in Sleman regency, Yogyakarta. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Triyono and Anggi Wiradhani, Faozia and Nur Mila, Amalia and Nur Habibi, Luthfan (2023) Millennial generation s perception on organic rice farming sustainability in Yogyakarta, Indonesia. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Tukino and Fauzi, Ahmad and Murtalim and Suhada, Karya and Amir and Hananto, April Lia and Veza, Ibham (2023) Artificial neural network for HCCI engine. In: 2021 International Summit on Education, Technology and Humanity, ISETH 2021, 20 December 2021through 21 December 2021, Surakarta.

Tyassilva, Arfienda Miawa and Aripriharta, Aripriharta and Ihsan, Rifqi Al and Alfadel Saputra, Rui and Omar, Saodah and Ching, Hung-Yu (2023) Aquaponic analysis using the PV system. In: 3rd IEEE International Conference in Power Engineering Applications, ICPEA 2023, 6 March 2023through 7 March 2023, Virtual, Online.

Utomo, Satrio Matin and Alamsyah, Doni Purnama and Othman, Norfaridatul Akmaliah and Setyawati, Irma and Rohaeni, Heni (2023) E-learning quality and satisfaction of user. In: International Conference on Cyber Management and Engineering, CyMa 2023En, 26 January 2023 through 27 January 2023, Bangkok.

Wan Mohamed, Ghazi and Hossain, A K M Zakir and Abd. Aziz, Mohamad Zoinol Abidin and Azam, S. M. K. (2023) A quarter-circled multi-resonator for UWB re-transmission based chipless RFID. In: 4th International Conference on Emerging Electrical Energy, Electronics and Computing, ICE CT 2022, 28 December 2022 through 29 December 2022, Hybrid, Arau.

Widodo and Chandra Purnomo, Rasyid and Susanti, Wiwi and Wan Ibrahim, Nik Rahila (2023) Customer motivation in the purchase of halal-certified chicken products through online delivery applications in Yogyakarta. In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Widodo and Shofi Wicaksono, Muhammad and Azilah Hamdzah, Nor Lailatul (2023) Customer satisfaction towards service quality of purchasing chicken meat on-site and through whatsapp services (Study of UD Sulastri). In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Wijaya, Oki and Susanto, Deni Aditya and Satriyandari, Yekti and Kasim, Anisah (2023) Is the household food security the nucleus determinant for the prevalence of stunting in Purworejo Regency? In: 4th International Conference on Agribusiness and Rural Development, IConARD 2023, 9 August 2023through 10 August 2023, Virtual, Online.

Xin, Bee Wei and Muhammad, Nor Aishah and Saleh, Mohammed Mehdi and Anwar Apandi, Nur Ilyana (2023) Performance evaluation of UAV-assisted cellular network using stochastic geometry-based model. In: 8th IEEE Asia Pacific Conference on Wireless and Mobile, APWiMob 2023, 10 October 2023 through 12 October 2023, Bali.

Yaacob, Mohd Rusdy and Mohd Saad, Wira Hidayat and Maslan, Mohd Nazmin and Abal Abas, Zuraida and Wan Daud, Wan Mohd Bukhari (2023) Effect of COVID-19 on the embedded industrial seminar implementation based on TVET undergraduate students perception. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, 14 July 2021 through 15 July 2021, Virtual, Online.

Yaakub, Muhamad Faizal and Mohd Radzi, Mohd Amran and Mohd Noh, Faridah Hanim (2023) Simulation of DC-DC converter considering parasitic element in flyback transformer and its effect on the converter's input current. In: 11th IEEE Conference on Systems, Process and Control, ICSPC 2023, 16 December 2023, Malacca.

Yahya, Muhammad Sani and Hamzah, Shipun Anuar and Ramli, Khairun Nidzam and Seman, Fauziahanim Che and Abu, Maisarah and Nordin, Shahilah and Malik, Nik Noordini Nik Abd and Mustapa, Mohammad Sukri (2023) Multiband and wideband characteristics of grid array antenna. In: 3rd International Conference on Electrical and Electronics Engineering 2021: Versatility of Electrical and Electronics Engineering Solutions for Sustainable Future, ICON3E 2021, 6 September 2021through 7 September 2021, Virtual, Online.

Yamaguchi, Masayuki and Seemork, Jiraporn and Phulkerd, Panitha and Ali, Mohd Amran Bin Md (2023) Modification of rheological responses under elongational flow at non-isothermal condition. In: 9th International Conference on Novel Trends in Rheology, 26 July 2023through 27 July 2023, Zlin.

Yob, Mohd Shukri and Hussin, A and Tahir, Noor Ayuma and Kurdi, O and Izahar, M.M. (2023) Design of permanent rectification for flare stack structure by using finite element method. In: 7th International Conference on Mechanical, Manufacturing and Plant Engineering, ICMMPE 2021, 29 November 2021 through 29 November 2021, Virtual, Online.

Yucheng, Wang and Jinlin, Yin and Jiaxuan, Li and Danlei, Ying and Cheong, Chew Boon (2023) Application research of computer intelligent building carbon emission reduction system. In: 2023 IEEE International Conference on Electrical, Automation and Computer Engineering, ICEACE 2023, 29 December 2023 through 31 December 2023, Changchun.

Yulio, Noviando and Herawan, Safarudin Gazali and Oktarina, Rienna and Setyandito, Oki and Mat Tokit, Ernie and Mohd Sa'at, Fatimah Al-Zahrah and Mohd Rosli, Mohamad Afzanizam (2023) The effect of number of blades on the horizontal axis water turbine performance. In: 6th International Conference on Clean Energy and Technology 2023, CEAT 2023, 7 June 2023through 8 June 2023, Hybrid, Penang.

Yusof, Ahmad Anas and Misha, Suhaimi and Wasbari, Faizil and Isa, Mohamed Hafiz Bin Md and Ibrahim, Mohd Qadafie and Kasim, Mohd Shahir (2023) Transient pressure analysis in water hydraulics machine using induced pressure effect from the compression of different materials. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2022, 20 July 2022through 20 July 2022, Pekan.

Yusof, Ahmad Anas and Yahya, Mohd Faid and Mohamed Nor, Mohd Khairi and Miskon, Muhammad Fahmi (2023) SUAS-based NDVI and RGB image for remote landscape and environmental monitoring on university campus. In: Innovative Manufacturing, Mechatronics and Materials Forum, iM3F 2022, 20 July 2022through 20 July 2022, Pekan.

Yusof, Norfadzlia Mohd and Muda, Azah Kamilah and Pratama, Satrya Fajri and Carbo-Dorca, Ramon and Abraham, Ajith (2023) Binary whale optimization algorithm with logarithmic decreasing time-varying modified sigmoid transfer function for descriptor selection problem. In: 14th International Conference on Soft Computing and Pattern Recognition, SoCPaR 2022, and the 14th World Congress on Nature and Biologically Inspired Computing, NaBIC 2022, 14 December 2022through 16 December 2022, Virtual, Online.

Yusoff, Mohd Hanafiah and Abdullah, Sukarnur Che and Nasser, Nasraan Shah Mohamed and Amari, Mohd Dzulhelmy (2023) Calibration method for flap structure of macrofluidic airflow sensor. In: 2021 World Congress on Science, Engineering and Technology, WCOSET 2021, 8 March 2021 through 12 March 2021, Virtual, Online.

Yusop, Noorrezam and Mustapha, Haslinawati Mohd and Ah Khaliludin, Nur Idayu and Shapiee, Norrlaili and Ismarau Tajuddin, Nur Ilyana and Mohd Mokhtar, Maizatul Farisah (2023) A systematic literature review: metaverse in educational learning for TVET student. In: 2023 IEEE International Conference on Computing, ICOCO 2023, 9 October 2023through 12 October 2023, Langkawi.

Yusop, Yusmarnita and Qi, Cheok Yan and Saat, Shakir and Husin, Huzaimah and Shaktivel, R. (2023) Simulation analysis of double-sided lc network for wireless capacitive transcutaneous energy transfer. In: 9th International Conference on Engineering and Emerging Technology, ICEET 2023, 27 October 2023through 28 October 2023, Istanbul.

Yusri, Muhammad Sukriyllah and Misran, Mohamad Harris and Yusop, Norbayah and Said, Maizatul Alice Meor and Othman, Mohd Azlishah and Suhaimi, Shadia (2023) Transfer efficiency enhancement on wireless power transfer using metamaterial. In: 11th International Conference on Information Technology, ICIT 2023, 9 August 2023 through 10 August 2023, Amman.

Z.N.R., Aina and Sharizal, A.S. and Shuaib, Norshah Aizat and Hairi, Mohd Hendra and Radzif, T.M. (2023) Implementation of fault tree analysis (FTA) in production process: A wood- based industry case study. In: 1st International Conference on Manufacturing Engineering Technology, IConMET 2021, 14 July 2021 through 15 July 2021, Virtual, Online.

Zahari, Nur Elida Mohamad and Mokhlis, Hazlie and Mansor, Nurulafiqah Nadzirah and Sulaima, Mohamad Fani (2023) Modelling of hybrid energy system for demand-side management; a case study of industrial customer in Malaysia. In: 2023 Innovations in Power and Advanced Computing Technologies, i-PACT 2023, 8 December 2023 through 10 December 2023, Kuala Lumpur.

Zaini, Muhammad Aizat Zaim and Md Saaid, Nur Farzana Fasihah and Mohd Rusdi, Muhammad Farid and Abdul Latiff, Anas and Ab Rahman, Mohd Fauzi and Al-Masoodi, Ahmed Hasan Hamood (2023) Dual-wavelength q-switched fiber laser generation by incorporating 2D materials in D-SMS fiber structure. In: 6th Photonics Meeting 2023, PM 2023, 10 June 2023 through 11 June 2023, Kuala Terengganu.

Zakaria, A. and Mid, E.C. and Mohamed, M.F. and Hussin, M.H.M. and Shaari, A.S. and Ruslan, Eliyana and Hadi, Dayanasari and Masri, M. (2023) Control algorithm for two-tank system using multiparametric programming. In: 8th International Conference for Man Machine Systems, ICoMMS 2023, 4 September 2023through 5 September 2023, Hybrid, Kuala Lumpur.

Zakaria, Mohd Hafiz and Ahamat, Amiruddin and Abdullah, Muhammad Haziq Lim and Azamuddin, Kamal Ezzani (2023) SMEs digital interaction on social media in Malaysia. In: 2023 International Conference on Digital Applications, Transformation and Economy, ICDATE 2023, 14 July 2023through 16 July 2023, Miri, Sarawak.

Zakaria, Neili and Sundaraj, Kenneth (2023) VGG16-based deep learning architectures for classification of lung sounds into normal, crackles, and wheezes using Gammatonegrams. In: 11th International Conference on Information Technology, ICIT 2023, 9 August 2023 through 10 August 2023, Amman.

Zohari, Naser Hamad Obaid (2023) Challenges for supply chain management (logistics management) in petroleum industry. In: International Conference on Business and Technology, ICBT 2022, 23 March 2022 through 24 March 2022, Manama.

Zulkarnain, Mohamad and Lubis, Sobron (2023) Numerical study on mechanical behavior of honeycomb sandwich with random fiber reinforcement. In: 4th Tarumanagara International Conference of the Applications of Technology and Engineering, TICATE 2023, 5 August 2023 through 6 August 2023, Virtual, Online.

Zulkefli, Nur Izyan Husnina and Khiar, Mohd Shahril Ahmad and Ghani, Sharin Ab (2023) Sensing the presence of benzotriazole passivator in thermally aged corrosive transformer insulating oil using UV-Vis spectroscopy. In: 19th IEEE International Colloquium on Signal Processing and Its Applications, CSPA 2023, 3 March 2023 through 4 March 2023, Kedah.

Book

Harum, Norharyati and Hamid, Erman and Zakaria, Nurul Azma, eds. (2023) Codewar: eksplorasi pengaturcaraan permainan digital. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792598

Hamid, Erman and Harum, Norharyati and Zakaria, Nurul Azma, eds. (2023) Codewar: interpretasi terhadap asas pengaturcaraan. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792482

Sedek, Muliati and Hamzah, Azrul Izham and Mohamad Juoi, Jariah, eds. (2023) Leadership in TVET - challenges and opportunities. AKEPT GLOBAL SERIES : Leadership Expert Dialogue . Akademi Kepimpinan Pendidikan Tinggi (AKEPT), Bandar Enstek, Negeri Sembilan. ISBN 9789672177395

Mohd Rosli, Zulkifli and Ismail, Syahriza, eds. (2023) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792833

Abdullah, Rohana and Salim, Mohd Azli, eds. (2023) Recent engineering practices: mechanical and manufacturing field. Penerbit UTeM Press, Durian Tunggal, Melaka.

Abdul Rahman, Azrul Azwan and A. Rahman, Muhamad Arfauz (2023) Reconfigurability in manufacturing system: advancing the flexibility and productivity. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792826

Abdullah, Mohd Azman and Mat, Shafizal and Shamsudin, Shamsul Anuar and Yob, Mohd Shukri (2023) Mechanical design. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792765

Bani Hashim, Ahmad Yusairi (2023) Contemporary robotics with classical kinematic modeling. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792734

Harum, Norharyati and Md. Shah, Wahidah and Ramly, Marliza (2023) Fiber optic: lab companion. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792758

Hashim, Rosziana (2023) The tapestry of knowledge: manufacturing engineering research. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792840

Husin, Azrizal and Ismail, Shafinar and Bakri, Mohammed Hariri (2023) Building the nation through efficiency of waqf institutions. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792888

Kamalrudin, Massila and Yusop, Noorrezam (2023) Kepentingan keperluan keselamatan dalam pembangunan perisian. Penerbit UTeM Press, Durian Tunggal, Melaka.

Mohamad, Noraiham and Mohamad Juoi, Jariah and Abd Razak, Jeefferie (2023) Green fertilizer: binder from chitosan, natural rubber & lignin. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792727

Mohamed, Ahmad Syafiq and Maidin, Shajahan and Abdul Hamid, Rahimah (2023) Ultrasonic and vacuum system integrated additive manufacturing: a new approach to reduce staircase effect of 3d printed parts. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792666

Mohd Sam, Mohd Fazli and Mohamed, Nurul Hasyimah and Nizam, Nurul Zarirah and Hashim, Nik Mohd Zarifie (2023) Idea for business. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792871

Othman, Azrina and Mohamad, Norhidayah and Mohd Din, Adilah (2023) Marketing for beginners: step - by - step guide. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792901

Salam, Saifullah and Zulkifli, Mohd Faizal and Zainal Abidin, Amar Faiz and Mispan, Mohd Syafiq (2023) Microprocessor technology: collection of multiple choice questions. Penerbit UTeM Press, Durian Tunggal, Melaka.

Shamsudin, Shamsul Anuar and Abd Samad, Md Fahmi and Abdollah, Mohd Fadzli and Abdullah, Mohd Azman (2023) Mechanics of machines. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792772

Ting, Kung Hieng and Maidin, Shajahan and Ariff, Hambali (2023) Ultrasonic assisted 3D printing of recycled Acrylonitrile Butadiene Styrene (ABS). Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792956

Wong, John Huang Ung and Maidin, Shajahan (2023) Vacuum system integrated additive manufacturing: a new approach to improve 3D printed parts tensile strength. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792963

Thesis

Anita Wijayanti (2023) Online community business model to enhance the sustainability of family business. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Dian Sa’adillah Maylawati (2023) Enhancement of text representation for Indonesian document summarization with deep sequential pattern mining. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdulla Ali, Al Mazrouei (2023) Leadership behaviour styles and the UAE municipalities employees motivation through entrepreneurial mindset. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Adam, Muhamad Alif (2023) Optimization of carbide tool performance under dry conditions in turning titanium alloy Ti-6A-4V ELI. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Rozelan, Aina Dalila (2023) Optimization of turning process parameters of stainless-steel using Box-Behnken method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Safian, Asraf Hadzwan (2023) The impact of movement control order (MCO) on teachers’ online professional development. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al Ali, Saeed Yousif Ahmed Ali (2023) The effect of intelligent business process management model on performance of smes mediated by innovation. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Al Balushi, Abdullah Ali Mohammed (2023) Analyzing the impact factors of customer loyalty among small and medium-sized hotels in Dubai. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al Rashidi, Mubarak (2023) The moderating role of organisational trust and organisational support on the relationship between knowledge management and the performance of organisations in Abu Dhabi, UAE. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Al-Araji, Zaid Jasim Mohammed (2023) Attack graph construction for enhancing intrusion prediction based on vulnerabilities metrics. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alderei, Ahmed Hmoud Saeed Jaafar (2023) Intellectual capital model for organisational performance through innovation culture within Abu Dhabi police organization. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alghfeli, Abdulla Hamad Obaid Hamad (2023) Safety performance analysis of signalized intersections in Abu Dhabi using a mixed research approach. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alhammadi, Ali Ahmed (2023) An integration framework of resources management and disaster organizational approach for UAE national emergency. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alhashmi, Amany Mohamad Jamea Ali (2023) The development of project risk management framework the case of United Arab Emirates. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alhosani, Fahad Ismail Ahmed Khalifa (2023) Citizen-centric adoption model for smart government among United Arab Emirates public users. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alkaabi, Maktoum Rashed (2023) The relationship between work environments, leadership styles and employee performance mediating role of job satisfaction. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alketbi, Sareea Abdulla Ali Bunawas (2023) Online learning performance impact among higher education students in the United Arab Emirates. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alkhoori, Khalid Husain Mohamed Shareef Abdulla (2023) A new user centred design model towards user satisfaction using online information of smart government. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Almansoori, Bakheeta Saeed Ali (2023) The impact of strategic foresight on dynamic capabilities of public organizations in the UAE. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alshamsi, Sultan Khalifa Humaid Khalifa (2023) Determinants of cyberattack prevention and the role of cybersecurity leadership in UAE banking sector. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alshemili, Sulaiman Mohammed Sulaiman Alsagheer (2023) Factors influencing cybersecurity performance mediated by cybersecurity readiness in public organizations of UAE. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ananthanarayanan, Chandra Segar (2023) Investigating the impacts of the global crisis on sustainability aspects: social-economy-environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azman, Azmiza Idayu (2023) Life cycle analysis of beverage packaging. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Fadhlur Rahim (2023) Operational supply risk and mitigation strategy for halal food manufacturers in Malaysia. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Cheok, Yan Qi (2023) Design and performance analysis of class-e double sided lc compensation topology for CPT system efficiency improvement. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chukwuyem, Giweze (2023) Determinants of sustainable software practices in the Malaysian electronic industry and the role of knowledge accessibility. Masters thesis, Universiti Teknikal Malaysia Melaka.

Daharat, Anas Nasir Mahmoud (2023) Examining the relationship between integrated management system and organizational innovation and excellence practices in the selected Abu Dhabi public sector organizations. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Ismaniza (2023) Comparative study on bending and torsional effect of highly thermal graphene hybridization conductive ink. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamadi, Aida Haryati (2023) Characterization of fused deposition modelling printed kenaf fibre reinforced poly-lactic acid composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jasmee, Solehah (2023) Characterisation of hybrid graphene nanoplatelets with functionalised boron nitride as thermal interface material. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Kanis, Finiks (2023) The effect of fly ash suspension as coolant in milling process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kasmuri, Emaliana (2023) Enhancement of feature sets for subjectivity analysis on Malay-English code-switching text. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Khoo, Nee Kah (2023) Occupational safety health and environment management tools adoption among small medium entreprises. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Laily, Suraya (2023) Analysis of repetitive repair welding on properties on stainless steel to carbon steel dissimilar metal joints. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mahmoud Ali, Waleed Saeed Mahmoud (2023) Big data engineering and cloud computing adoption model in United Arab Emirates large business organizations. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Md Lazi, Farah Nadhirah (2023) The role of organizational culture in the implementation of lean tools towards operational performance in an aerospace company. Masters thesis, Universiti Teknikal Malaysia Melaka.

Meor Shaari, Nurul Muslimah (2023) The characterization of class E Pi1B capacitive power transfer for biomedical implantable device application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Imanurezeki (2023) Optimization of centralised air conditioning system performance for university office building. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Akram, Mohd Khairil Ridzwan (2023) Boiler tube remaining life according to Larson-Miller parameter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad Noor, Norida (2023) Correlation study on different temperature-humidity of highly thermal graphene hybridzation conductive ink. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Alias, Nur Syafiqah Nadiah (2023) Numerical analysis and synthesis of Zno nanorods with various dopant concentrations for electron transport improvement in solar cell applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Noh, Azhari (2023) Multi-objective optimization of bio-base grease using hybrid taguchi-grey relational analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Romli, Muliati (2023) Managing supply chain for the end-of-life solar panels in Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mutlag, Ammar Awad (2023) Multi-agent fog computing resource management model for critical healthcare applications. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Nadarajoo, Navindran (2023) Design and analysis of home assiatant based on Raspberry Pi for smart home automation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nandagopal, Darvind Kumar (2023) Automated vision system to improve inspection lead time for molded components based on neural network. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naseri, Roszi Naszariah Nasni (2023) Determinant of purchase intention through online on halal cosmetic. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ponnaiyan, Jayaprakash (2023) A simulation of solar photovoltaic thermal system with spiral design absorber using MWCNT water working fluid. Masters thesis, Universiti Teknikal Malaysia Melaka.

Raden Ajeng, Nurulhaq Dinovita (2023) Academic performative measures in higher education a case study in the Universiti Teknikal Malaysia Melaka. Masters thesis, Universiti Teknikal Malaysia Melaka.

Retas, Zain (2023) Design of nonlinear adaptive interaction algorithm controller for improvement of tracking performance of X-Y table ball screw drive system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Roszali, Farah Farhana (2023) Acceptance and response attribute model towards augmented reality games based on hand gesture interaction. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safie, Nur Ezyanie (2023) High humidity fabrication of rGO incorporated perovskite absorber and MoS2 electrode for prospective inverted PSC. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Salem, Awsan Thabet (2023) An enhanced robust association rules method for missing values imputation in Arabic language data set. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saw, Chia Yee (2023) Neuromorphic learning machine based on stochastic reservoir computing for time series data processing and classification. Masters thesis, Universiti Teknikal Malaysia Melaka.

Segar, Loga Varathan (2023) Effect of graphene nanoplatelets on the microstructure and mechanical properties of aluminium matrix composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Selva Raja, Hemananthiny (2023) The relationship between employer branding and talent management in manufacturing firm the mediating role of transformational leadership. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shahidan, Nur Shafizah (2023) Technology utilisation in Malaysia from broiler production perspective. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Sivamoorthy, Selvaganabathy (2023) Material flow analysis of agv system by using simulation technique to improve productivity. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tiong, Jing Yin (2023) Investigating the effect of computer workstation setups on musculoskeletal symptoms, oxygen saturation, and perceived fatigue. Masters thesis, Universiti Teknikal Malaysia Melaka.

Umar, Mohd Fuad (2023) Hoshin Kanri strategy for productivity improvement in aero composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Mohd Zaki, Wan Nur Fatihah (2023) Constructing IoT botnet detection model based on degree centrality and path analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Yusof, Wan Fairuz (2023) The effect of different type of additives on friction and wear of MNR grease. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yew, Poh Leng (2023) Solar irradiance forecasting using statistical and machine learning methods. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkiflee, Farisya Farhana (2023) Interface pressure distribution of conventional and 3D-printed sockets using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.