Items where Year is 2011

Article

Se, Sian Meng and Shaaban, Azizah and Mohd Ibrahim, Imran (2011) Microwave Absorbing Material Using Rubber Wood Sawdust. Wireless Technology and Applications (ISWTA), 2011 IEEE Symposium on. pp. 192-197. ISSN 978-1-4577-1496-2

A Aziz, Khairul Azha and Abdullah, Shahrum Shah and Mohd Jahari @ Mohd Johari, Ahmad Nizam (2011) Face Detection Using Radial Basis Function Neural Networks with Fixed Spread Value. International Journal of Computer Sciences and Engineering Systems, 5 (3). pp. 145-151. ISSN 0973-4406

A Aziz, Khairul Azha and Hamzah, Rostam Affendi and Abdullah, Shahrum Shah and Mohd Jahari @ Mohd Johari, Ahmad Nizam and Damni, Siti Dhamirah ‘Izzati (2011) Face recognition using fixed spread radial basis function neural network. Journal of Telecommunication, Electronic And Computer Engineering, 3 (2). pp. 55-59. ISSN 2180-1843

A. P., Puvanasvaran and Kerk, Swee Tian and Muhammad, Mohd Razali (2011) Sustainability Of ISO 14001 Standards Through An Integration With Lean Principles. American Journal of Applied Sciences, 8 (11). pp. 1182-1194. ISSN 1546-9239

A. P., Puvanasvaran and M. R., Muhamad (2011) Sustainability of International Standards Organisation 14001 Standards through Integration with Lean Principles. American Journal of Applied Sciences, 8 (11). pp. 1182-1194. ISSN 1546-9239

A. P., Puvanasvaran (2011) People Development System as a Pillar in Implementing Lean For Public Sector. Journal of Human Capital Development, 3 (1). pp. 1-23. ISSN 1985-7012

A. P., Puvanasvaran (2011) People Development System as a Pillar in Implementing Lean for Public Sector. Journal of Human Capital Development, 43 (1). pp. 1-23. ISSN 1985-7012

A. P., Puvanasvaran and Kerk, Swee Tian and Muhammad, Mohd Razali (2011) Principles and Business Improvement Initiatives of Lean Relates to Environmental Management System. Proceeding IEEE International Technology Management Conference 2011, 2 (11). pp. 439-444. ISSN 978-1-61284-952

A. P., Puvanasvaran and Sulaiman, Hisham and Sued, Kamil (2011) Investigation on the Mechanical Characteristics of Sawdust and Chipwood Filled Epoxy. Journal of Mechanical Engineering and Technology, 3 (1). pp. 71-78. ISSN 2180-1053

A.R.M, Warikh and A., Nurulhuda and A.R., Jeefferie (2011) Characterization of Microstructure and Magnetic Properties of CaCu3Mn4O12 by Sol Gel Route. Malaysian Journal of Microscopy, 7. pp. 147-153. ISSN 1823 7010

A.T, Dayang Noorasura and Salam, Sazilah (2011) A mobile of mobile learning object design for concept comprehension using reciprocal teaching strategies and augmented realty. A model of mobile learning object design for concept comprehension using reciprocal teaching strategies and agumented reality, 3. pp. 717-720. ISSN 9781424487271

ABD RAZAK , JEEFFERIE and S., Nurhashima and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip and S., Mohd Shukor and Abdullah, N.S and Omar, M.A (2011) Characterization of Injection Molded 17-4PH Stainless Steel prepared with Waste Rubber Binder. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (1). pp. 11-21. ISSN 2180-1053

ABD RAZAK , JEEFFERIE and Abd Rahim, Toibah and YAAKOB, MOHD YUHAZRI and A.R.M., Warikh and Omar, Nooririnah and Maslan, Mohamad Haidir and Sihombing, Haeryip and Junid, Ramli (2011) Tensile and Impact Properties Evaluation for Enviro-Recycled Wood Plastic Composite of PP/r-WF. Applied Mechanics and Materials, 52-54. pp. 2082-2087. ISSN 1660-9336

ABD RAZAK , JEEFFERIE and Othman, Nurul Fariha and Abd Rashid , Mohd Warikh and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip and Junid , Ramli (2011) Preliminary study on the Physical and Mechanical Properties of Tapioca Starch / Sugarcane Fiber Cellulose Composite. ARPN Journal of Engineering and Applied Sciences, 6 (4). pp. 7-15. ISSN ISSN 1819-6608

ABD RAZAK , JEEFFERIE and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip (2011) Mechanical Properties Evaluation for Enviro-Wood Plastic Composite Made of HDPE-PPB-RWF Mixtures. International Journal of Advances in Science and Technology, 3 (2). pp. 87-101. ISSN 2229-5219

ABDULLAH, Mohd Azman and MICHITSUJI, Yohei and NAGAI, Masao and VENTURE, Gentiane (2011) System Identification of Railway Trains Pantograph for Active Pantograph Simulation. Journal of System Design and Dynamics, 5 (5). pp. 1141-1154. ISSN 1881-3046

Ab Rashid, Siti Rosmaniza and Ismail, Mahamod (2011) Development of A Secured Database Access on Application Server. International Journal of Research and Reviews in Information Security and Privacy (IJRRISP), 1 (3). pp. 39-41. ISSN 2046-5718

Abd Aziz, Mohamad Zoinol Abidin and Mohd. Shah, Mohd. Syaiful Redzwan and Suaidi, Mohd. Kadim and A. Rahim, Mohd. Kamal (2011) Dual Polarization Single Port Inset Feed Microstrip Patch Array Antenna. Journal of telecommunication, electronic and computer engineering , 3 (1). pp. 15-20. ISSN 2180-1843

Abd Manaf, Mohd Edeerozey and Tsuji, Manami and Nobukawa, Shogo and Yamaguchi, Masayuki (2011) Effect of Moisture on the Orientation Birefringence of Cellulose Esters. Polymers, 3. pp. 955-966. ISSN 2073-4360

Abd Manaf, Mohd Edeerozey (2011) Wavelength Dispersion of Orientation Birefringence for Cellulose Esters Containing Tricresyl Phosphate. Macromolecules, 44. pp. 3942-3949. ISSN 0024-9297

Abd Manap, Nurulfajar and Mat Ibrahim, Masrullizam (2011) Co-operative surveillance cameras for high quality face acquisition in a real-time door monitoring system. 3rd European Workshop on Visual Information Processing. pp. 99-104. ISSN 978-1-4577-0072-9

Abd Samad, Md Fahmi (2011) Deterministic Mutation-Based Algorithm for Model Structure Selection in Discrete-Time System Identification. International Journal of Intelligent Control and Systems, 16 (3). pp. 182-190. ISSN 02187965

Abd. Aziz, Mohamad Zoinol Abidin and A. Rahim, Mohamad Kamal and Abdul Kadir, Muhammad Faiz and Suaidi, Mohd Kadim and Daud, Zakiah and Jamaluddin, Mohd Hidayat (2011) The Investigation of polarization diversity in MIMO system at 2.4 GHz. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 3 (2). pp. 47-54. ISSN 2180-1843

Abdelrafe, E. and Hussin, B. (2011) Estimating Quality-Affecting Risks in Software Projects. The International Management Review (IMR), 7 (2). pp. 66-74. ISSN 1551-6849

Abdollah, M. F. and Rafrastara, Fauzi Adi (2011) Advanced Virus Monitoring and Analysis System. (IJCSIS) International Journal of Computer Science and Information Security, Vol 9, No.1. ISSN 1947-5500

Abdollah, Mohd Fadzli bin (2011) The Effect of Maximum Normal Impact Load, Absorbed Energy, and Contact Impulse, on the Impact Crater Volume/Depth of DLC Coating. Tribology Online, 6 (6). pp. 257-264. ISSN 1881-2198

Abdul Halim, Abu Bakar and Ahmad Nasarudin, Abd Rahim and Mohd Zambri, Mohd Khairi (2011) Analysis of lightning-caused ferroresonance in Capacitor Voltage Transformer (CVT). International Journal of Electrical Power & Energy Systems, Volume (Issue ). pp. 1536-1541. ISSN 0142-0615

Abdul Kadir, Faizul Akmar and Hudha, Khisbullah and Sabino, Ubaidillah (2011) Modelling,Characterisation And Force Tracking Control Of A Magnetorheological Damper Under Harmonic Excitation. International Journal Of Modelling, Identification And Control (Ijmic), 13 (1-2). pp. 9-21. ISSN 1746-6172

Abdul Majid, Izaidin and Ismail, Kamriah and Wan Omar, Wan Zaidi (2011) The commercialisation process of patents by universities. African Journal Of Business Management. pp. 7198-7208. ISSN 1993-8233 ©2011 Academic Journals

Abdul Majid, Izaidin and Aman, Othman and Tahir, Md.Nor Hayati and Abdul Aziz, Nor Azah (2011) THE SUCCESS FACTORS OF FOOD SMALL MEDIUM ENTREPRENEURS UNDER THE ONE DISTRICT ONE INDUSTRY PROGRAMME: A CASE ON FOOD MANUFACTURING ENTREPRENEURS IN MELAKA. Journal of Global Interpreneurship. pp. 1-11. ISSN 2011/11(11)

Abdul Majid, Izaidin and Ismail, Kamariah (2011) Exploring entrepreneurship education and training in Malaysia’s Public Higher Learning Institutions. International Journal of Academic Research in Business and Social Sciences June 2012, Vol. 2, No. 6 ISSN: . pp. 2222-2699. ISSN 2222-6990

Abdul Majid, Izaidin and Ismail, Kamariah and Cooper, Sarah (2011) Prevalence of entrepreneurial management practices in technology-based firms in Malaysia. African Journal of Business Management, 5 (6). pp. 2075-2082. ISSN 1993-8233

Abdul Majid, Izaidin and Ismail, Kamariah and Md. Saad, Mohd Shamsuri (2011) Understanding Strategic Reactiveness Influences on Entrepreneurial Management Tendencie. Journal of Organizational Management Studies . pp. 1-12. ISSN DOI: 10.5171/2011.137468

Abdul Munir, Fudhail and Mohamad Zin, Mohd Rody and Mohd Azmi, Mohd Irwan and Che Sidik, Nor Azwadi (2011) Application Of Lattice Boltzmann Method In Predicting Flow Of Shear Driven Cavities. Journal of Mechanical Engineering and Technology, 3 (2). pp. 55-70. ISSN 2180 – 1053

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Mailah, Nashiren and Zare, Mohamad Reza and Wakiwaka, Hiroyuki and Nirei, Masami (2011) Thrust optimization of linear oscillatory actuator using permeance analysis method. International Review of Electrical Engineering (I.R.E.E.). pp. 2229-2938. ISSN 1827-6679

Abdullah, Abdul Rahim and Sha'ameri, Ahmad Zuri (2011) Power Quality Analysis Using Bilinear Time-Frequency Distributions. EURASIP Journal on Advances in Signal Processing, 2010 (1). pp. 1-18. ISSN 16876172

Abdullah, Norida (2011) Framework of self-esteem, job-search intensity, and career decision-making self-efficacy for graduating students: an application of the structural equation modeling. Proceeding of the Education Postgraduate Research Seminar. pp. 250-268. ISSN 978-967-0194-17-2

Abdullah, Raihana Syahirah and Mas'ud, M. Z. and Abdollah, M. F. and Sahib, S. and Yusof, R. (2011) Recognizing P2P Botnets Characteristic Through TCP Distinctive Behaviour. International Journal of Computer Science and Information Security, 9 (12). pp. 7-11. ISSN 1947-5500

Abu, N. A. (2011) Spectral Test via Discrete Tchebichef Transform for Randomness. International Journal of Cryptology Research, 3 (1). 01-14. ISSN 1985-5753

Ahmad, Ibrahim and Jaafar, Azizah (2011) Game design framework: a pilot study on users’ perceptions. Lecture Notes in Artificial Intelligence, Subseries of Lecture Notes in Computer Science. pp. 33-38. ISSN 978-3-642-36542-3

Ahmad, S. (2011) Requirements Negotiation: Making System Stakeholders’ Multiple-views One. Journal of Communication and Computer, 8 (4). pp. 290-299. ISSN 1548-7709

Ahmad, S. and Muda, N. A. (2011) An Empirical Framework Design to Examine the Improvement in Software Requirements through Negotiation. International Journal of New Computer Architectures and their Applications (IJNCAA), 1 (4). pp. 584-599. ISSN 2220-9085 (online)

Ahmad , R. (2011) Towards Implementing a Privacy Policy: An Observation on Existing Practices in Hospital Information System. Journal of e-health Management, Vol. 2 (8). pp. 1-9. ISSN Open Access

Akiah, Masni Azian and Choudhury, Imtiaz Ahmed (2011) Tensile Properties of Paper Pulp Food Packaging Material. Journal of Advanced Manufacturing Technology (JAMT) , 5 (2). pp. 123-135. ISSN 1985-3157

Al-Amani, Umar (2011) Effect of Heat Treatment on the Grain Orientation of Bi3.25Nd0.75Ti3O12 Ceramics. Malaysian Journal of Microscopy. pp. 132-136. ISSN 1823 7010

Al-Amani, Umar (2011) INVESTIGATION OF THE CHARACTERISTICS OF BARIUM STRONTIUM TITANATE (BST) DIELECTRIC RESONATOR CERAMIC LOADED ON ARRAY ANTENNAS. Progress In Electromagnetics Research, 121. 181-213 . ISSN 1070-4698

Ali, Mohd Basri (2011) Analysis of an Instrumented Charpy Impact Using Power Spectrum Density. Key Engineering Materials. pp. 130-135. ISSN 1013-9826

Ali, Mohd Basri (2011) Evaluating Charpy Impact Signals with Different Frequencies Using Power Spectrum Densities. Advanced Materials Research. ISSN 10226680

Ali, Mohd Basri (2011) Experimental Analysis of an Instrumented Charpy Impact Using Signal Processing Approach. Advanced Materials Research, 197-19. pp. 1621-1625. ISSN 1662-8985

Ali, Mohd Basri (2011) Experimental Analysis of an Instrumented Charpy Impact Using Statistical Study Based Data Analysis. International Journal of Mechanical and Materials Engineering , 6 (2). pp. 260-268. ISSN 1823-0334

Ali, Mohd Basri (2011) Test Simulation using Finite Element Method. Journal of Physics: IOP conference series: Material Science and Engineering (doi:10). 012-013. ISSN 1757-8981

Ali, Nur Alisa and Ja'afar, Abd Shukur and Abd Rahim, Rosman and Mohammed Napiah, Zul Atfyi Fauzan and Md Yusop, Azdiana and Meor Said, Maizatul Alice (2011) Performance Analysis of Motion Estimation Algorithms on Digital Video Images. Applied Mechanics and Materials, 83. pp. 174-178. ISSN 1660-9336

Aman, Aminudin and Yaacob, Mohd Muhridza and ABD RAZAK , JEEFFERIE (2011) Dieletric Strength of Waste Tyre-Dust-Polypropylene (WTD-PP) for High oltage Application. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1578-1583. ISSN 1991-8178

Anggun, Anugerah and Omar, Rosli and Sulaiman , Marizan and Ahmad, Azhar (2011) Fuzzy Optimization for Speed Controller of an Indirect Vector Controlled Induction Motor Drive Using Matlab Simulink. Journal of Theoretical and Applied Information Technology, 28 (2). pp. 108-113. ISSN 1992-8645

Awang Md Isa, Azmi (2011) MIMO Positioning for IMT-Advanced Systems Based on Geometry Approach in NLOS Environments. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 3 (1). pp. 55-68. ISSN 2180-1843

Bahaman, Nazrulazhar and Anton Satria, Prabuwono and Mas'ud, Mohd Zaki (2011) Implementation of IPv6 network testbed: Intrusion detection system on transition mechanism. Journal of Applied Sciences, 11 (1). pp. 118-124. ISSN 1812-5654

Bakar, Norasiken (2011) NCAL 2011 tingkatkan kaedah pembelajaran aktif. Berita Harian, Varsiti. p. 5. (In Press)

Bakar, Norasiken and Mohd Hatta, Nuraziera (2011) Penyelidik UTeM Sedia Courseware Belajar Kimia Guna Kaedah 3D. Melaka Hari Ini. (In Press)

Bani Hashim, Ahmad Yusairi (2011) Representing system by gene encoding. International Journal of Research and Reviews in Computer Science, 2 (1). pp. 247-249. ISSN 2079-2557

Bani Hashim, Ahmad Yusairi and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, Lydia (2011) Evaluation of foot kinematic structure by the order of bones' and joints' edges. International Journal of Modelling and Simulation, 31 (2). pp. 101-111. ISSN 1925-7082

Bani Hashim, Ahmad Yusairi and Noor Azuan, Abu Osman and Wan Abas, Wan Abu Bakar (2011) Determining foot-ankle mechanism design by mapping the relationships among bones, joints, and ground reaction force. Global Engineers & Technologists Review, 1 (2). pp. 39-47. ISSN 2231-9700

Bani Hashim, Ahmad Yusairi and Noor Azuan , Abu Osman and Wan Abas, Wan Abu Bakar and Abdul Latif , Lydia (2011) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, x (x). pp. 1-7. ISSN 0307-904X (In Press)

Che Haron, Che Hassan and A Ghani, Jaharah and Sulaiman, Mohd Amri and Lutfiah Intan and Kasim, Mohd Shahir (2011) The Effect Of Minimal Quantity Lubrication (MQL) On The Surface Roughness Of Titanium Alloy Ti-6Al-4V ELI In Turning Process. Advanced Materials Research Journal, 146-14 (1750). pp. 1750-1753. ISSN 10.4028

Chong, Shin Horng (2011) Practical motion control with acceleration reference for precision motion - new NCTF control and its application to non-contact mechanism. Journal of Precision Engineering , 35 (1). pp. 12-23. ISSN 0141-6359

Draman @ Muda, Azah Kamilah and Choo, Yun Huoy and Pratama, Satrya Fajri (2011) Feature selection methods for writer identification: A comparative study. International Journal on Procedia Engineering 2011. pp. 1-10.

Embi, Mohamed Amin and Adun, Mohd Najib and Abdul Wahab, Zaidan and Maseran, Hamidah and Ab Aziz, Sidek (2011) Buletin Majlis ePembelajaran IPTA Malaysia. Buletin Majlis ePembelajaran IPTA Malaysia (3/2011). (In Press)

Ernawan, Ferda and Abu, Nor Azman (2011) The efficient discrete tchebichef transform for spectrum analysis of speech recognition. International Journal of Machine Learning and Computing, 1 (1). 01-06. ISSN 0277-786X

Fauziyah, Salehuddin and Ahmad, Ibrahim and Fazrena, Azlee Hamid and Azami , Zaharim (2011) Influence of HALO and source/drain implantation on threshold voltage in 45nm PMOS device. Australian Journal of Basic and Applied Sciences, 5 (1). pp. 55-61. ISSN 1991-8178

Fauziyah, Salehuddin (2011) Optimization of Process Parameter Variability in 45 nm PMOS Device using Taguchi Method. Journal of Applied Sciences, 11 (7). pp. 1261-1266. ISSN 1812-5654

Fauziyah, Salehuddin and Ahmad, Ibrahim and Azlee Hamid, Fazrena and Zaharim, Azami and Elgomati, Husam Ahmed and Majlis, Burhanuddin Yeop and Apte, Prakash R. (2011) Optimization of HALO structure effects in 45nm p-type MOSFETs device using Taguchi method. World Academy of Science, Engineering and Technology. pp. 80-86. ISSN 2010-3999 (online)

Fauziyah , Salehuddin (2011) Optimization of input process parameters variation on threshold voltage in 45 nm NMOS device. International Journal of Physical Sciences, 6 (30). pp. 7026-7034. ISSN 1992-1950

Gan, Chin Kim (2011) Closed loop price signal based market operation within Microgrids. European Transactions on Electrical Power, 21 (2). pp. 1310-1326. ISSN 1546-3109

Gan, Chin Kim (2011) Optimal design of low-voltage distribution networks for CO2 emission minimisation. Part I: model formulation and circuit continuous optimisation. IET Generation, Transmission & Distribution, 5 (1). pp. 38-46. ISSN 1751-8687

Gan, Chin Kim (2011) Optimal design of low-voltage distribution networks for CO2 emission minimisation. Part II: Discrete optimisation of radial networks and comparison with alternative design strategies. IET Generation, Transmission & Distribution, 5 (1). pp. 47-56. ISSN 1751-8687

Gan, Chin Kim and Pierluigi, Mancarella and Pudjianto, Danny and Strbac, Goran (2011) Statistical appraisal of economic design strategies of LV distribution networks. Electric Power Systems Research, 81 (7). pp. 1363-1372. ISSN 0378-7796

Haeryip Sihombing and Rassiah, Kannan and Chidambaram, Parahsakthi (2011) Line Balancing Analysis Of Tuner Product Manufacturing. International Journal of Engineering Science and Technology, 3 (6). pp. 5206-5214. ISSN 0975-5462

Hambali, A and Rahim, A.S (2011) Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage. CONCURRENT ENGINEERING: Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Hambali, A and Sapuan, S.M and Mohamad , M (2011) Concurrent Decisions using Analytical Hierarchy Process at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 79-85. ISSN 1985-3157

Hambali, A and Sapuan, S.M and Rahim, A.S and Ismail, N and Nukman, Y (2011) Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage. CONCURRENT ENGINEERING: Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Hambali, A and Sapuan, S.M and Tajul, A.A and Taufik, S (2011) Development of Conceptual Design of Automotive Bumper Beam at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 11-25. ISSN 1985-3157

Hamzah, Rostam Affendi and Rosly, Hasrul Nisyam and Hamid, Mohd Saad and A Aziz, Khairul Azha (2011) 3D Image Plane from Stereo Camera Calibration on Extrinsic Parameters in Stereo Vision Application. Journal of telecommunication, electronic and computer engineering , 3 (1). pp. 79-86. ISSN 2180-1843

Haron, Nor Zaidi (2011) Redundant Residue Number System Code for Fault-Tolerant Hybrid Memories. ACM Journal on Emerging Technologies in Computing Systems, 1 (1). pp. 1-19. ISSN 1550-4832

Haron, Nor Zaidi and Hamdioui, Said (2011) Redundant Residue Number System Code for Fault-Tolerant Hybrid Memories. ACM Journal on Emerging Technologies in Computing Systems, 7 (1). pp. 1-19. ISSN 1550-4832

Has, Zulfatman and Rahmat, Mohd Fua'ad and Husain, Abdul Rashid and Ghazali, Rozaimi and Md Rozali, Sahazati (2011) Smooth Control Action of Sliding Mode for a Class of Electro-Hydraulic Actuator. 4th International Conference on Mechatronics (ICOM’11). pp. 1-7. ISSN 978-1-61284-437-4/11

Hasan Basari, Abd Samad and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2011) Applied markovian approach for determining optimal process means in single stage SME production system. International Journal for Advances in Computer Science, 2 (3). pp. 1-7. ISSN 2218-6638

Hasim, Norhaslinda and Basar, Mohd Farriz (2011) A water bath control system in a virtual laboratory environment. JOURNAL OF COMPUTER SCIENCE AND ENGINEERING, 9 (1). pp. 14-22. ISSN 2043-9091

Hassan, N. H. and Selamat, S. R. and Sahib, S. and Hussin, B. (2011) Towards Incorporation of Software Security Testing Framework in Software Development. Communications in Computer and Information Science : Software Engineering and Computer System , 179 (1). pp. 16-30. ISSN 1865-0929

Hassan, Nornikman and Cheng, Ee Meng and O. Nadiah and Abd Malek, Mohd Fareq and Manjur Ahmed and Abd. Aziz, Mohamad Zoinol Abidin and Othman, Abdul Rani and Soh, Ping Jack and Abdullah Al-Hadi, Azremi and A. Hasnain and Taib, Mohd Nasir (2011) Rubber Tire Dust-Rice Husk Pyramidal Microwave Absorber. Progress In Electromagnetics Research, 117. pp. 449-477.

Hazmilah, Hasan (2011) Interpretasi Manifestasi Fikiran Pengajian Tinggi ke Arah Transformasi Negara. Buletin Reseptor Pusat Bahasa dan Pembangunan Insan. pp. 12-15. ISSN Bilangan ke 4

Hussin, B. and Abdelrafe, E. (2011) Managing Software Project Risk With Proposed Regression Model Techniques and Effect Size Technique. International Review on Computers and Software (IRECOS) , 6 (N. 2). pp. 250-263. ISSN 1828-6003

Ibrahim, A.B and Othman, A.R and Hussain , M.N and Johal, M.S (2011) Low Noise Amplifier at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for Wireless Applications. IJECE, Vol. 1 (No. 1). pp. 1-5. ISSN 2088-8708

Ibrahim, A.B and Othman , A.R and Hussain , M.N and Johal , M.S (2011) Design of LNA at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for WiMAX Applications. JTEC, Vol. 3 (No. 2). pp. 1-6. ISSN 2180 - 1843

Ibrahim, Abu Bakar and Othman, Abdul Rani and Husain, Mohd Nor and Johal, Mohammad Syahrir (2011) Low Noise, High Gain LNA at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for Wireless Applications. IJIEE, Vol. 1 (No. 2). pp. 146-149. ISSN 2010-3719

Ibrahim, Zulkifilie and Mohd Yaakop, Nurazlin and Ahmad, Fauzi and Sulaiman , Marizan and Jusoff, Kamaruzaman and Jano, Zanariah and Linda , Khoo Mei Sui and Abu Hasim, Ahmad Shukri and Mat Isa, Siti Noormiza (2011) Improved Direct Torque Control Load Torque Estimator With The Influence Of Steering Angle For Dual Induction Motors Electric Vehicle Traction Drive System. World Applied Sciences Journal, 21 (-). pp. 11-22. ISSN 1818-4952

Imran Syakir, Mohamad and S. B., Abdul Hamid and W. M. , Chin and K. H., Yau and A., Samsuri (2011) Nanofluid-based Nanocarbons An Investigation of Thermal Conductivity Performance. Journal of Mechanical Engineering and Technology, 3 (1). pp. 79-87. ISSN 2180 – 1053

Isa, Halim (2011) Correlation Between Job Satisfaction Level and Workstation Design: A Survey at Malaysian Automotive Industry. The Journal of the Institution of Engineers, Malaysia, 72 (2). pp. 49-54. ISSN 0126-513X

Isa, Halim (2011) Posture, Muscle Activity and Oxygen Consumption Evaluations Among Metal Stamping Operators: A Pilot Study in Malaysian Small and Medium Industries. The Journal of the Institution of Engineers, Malaysia, 72 (4). pp. 47-57. ISSN 0126-513X

Isa, Halim (2011) Correlation between psychological fatigue and muscle fatigue associated with prolonged standing. Malaysian Journal of Ergonomics, 1. pp. 39-49. ISSN 2232-1101

Isa, Halim (2011) The Effect of Safety Shoe Insole Material on Subjects due to Prolonged Standing. Malaysian Journal of Ergonomics. pp. 11-20. ISSN 2232-1101

Isa, Halim (2011) A Review on Health Effects Associated with Prolonged Standing in the Industrial Workplaces. International Journal of Research & Reviews in Apllied Sciences, 8. pp. 14-21. ISSN 2076-734X

Ismail, Mohd Muzafar and zainuddin, noorazlanshah (2011) Numerical Method Approaches in Optical Waveguide Modeling. Applied Mechanics and Materials (Volumes 52 - 54), 52-54 (2011). pp. 2133-2137. ISSN (ISSN:1660-9336)

Ismail, Mohd Muzafar and zainudin, Muhamamd Noorazlan and Meor said, Maizatul Alice and Abd Rahim, Rosman (2011) An Investigation of Electromagnetic Field Effect On a Human Skin Cell Using Numerical Method Approaches. IEEE Xplore. pp. 178-182. ISSN 978-1-4577-1630-0

Jabar, Juhaini and Othman, Norfaridatul Akmaliah and Idris, Mohd Asmadi (2011) Enhancing Organizational Performance Through Strategic Technology Alliances: A Study on Malaysian Manufacturers. International Journal of Innovation, Management and Technology, 2 (6). pp. 506-511. ISSN 2010-0248

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole (2011) A hybrid DTC-DSC drive for high performance induction motor control. Journal of Power Electronics, 11 (5). pp. 704-712. ISSN 15982092

Jidin, Auzani and Elbuluk, Malik E. and Sutikno, Tole and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim (2011) Extending switching frequency for torque ripple reduction utilizing a constant frequency torque controller in DTC of induction motors. Journal of Power Electronics, 11 (2). pp. 148-155. ISSN 15982092

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik E. (2011) Simple dynamic overmodulation strategy for fast torque control in DTC of induction machines with constant-switching-frequency controller. IEEE Transactions on Industry Applications, 47 (5). pp. 2283-2291. ISSN 0093-9994

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik E. (2011) An optimized switching strategy for quick dynamic torque control in DTC-hysteresis-based induction machines. IEEE Transactions on Industrial Electronics, 58 (8). pp. 3391-3400. ISSN 0278-0046

Junid , Ramli and ABD RAZAK , JEEFFERIE and Mahat, Mohd Muzamir (2011) The Effects of Photoinitiator Addition to the Mechanical and Physical Properties of the Epoxy and Vynil Ester Fiber Glass Laminated Composites. International Journal of Applied Science and Technology, 1 (03). pp. 74-79. ISSN 2221-0997

Kamarudin, Abu Bakar and Mond Fazli, Mod Sam and Md Nor Hayati, Tahir and Ismi, Rajiani and Norhana, Muslan (2011) Green Technology Compliance in Malaysia For sustainable Business Development. Journal of Global Management, Vol. 2 (No. 1). pp. 55-65. ISSN ISSN: 977-2229-919X

Kamarudin, Noraziahtulhidayu and Salam, S. (2011) Enabling Mobile Location Based Services for Emergency Cases. Enabling Mobile Location Based Services for Emergency Cases. pp. 97-102. ISSN 978-1-61284-295-0

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2011) Surface Integrity of Inconel 718 under MQL condition. Advanced Materials Research, 150-15. 1667 -1672. ISSN 1022-6680

Khalid, Mohamad Kamal and Mansor, Muhd Ridzuan and Abdul Kudus, Syahibudil Ikhwan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir (2011) Performance Investigation of the UTeM Eco-Car Disc Brake System. International Journal of Engineering & Technology IJET-IJENS, 11 (6). pp. 1-6. ISSN 2077-1185

Khisbullah , Hudha and zakaria, Mohd Hafidz and tamaldin, noreffendy (2011) Hardware in the Loop Simulation of Active Front Wheel Steering control for yaw disturbance rejection. International Journal of Vehicle Safety, 5 (4). pp. 356-373. ISSN 1479-3105

Kudus, Norliah and Sidek, Safiah and Hussin, Sufean and Abu Hassan, Mahadi (2011) Learning Organization Practices as Human Resource Development for Transformational Change at UTeM. Journal of Human Capital Development, 4 (2). pp. 117-128. ISSN 1985-7012

Lau, Kok Tee and Sorrell, Charles Christopher (2011) Electrophoretic Mobilities Of Dissolved Polyelectrolyte Charging Agent And Suspended Non-Colloidal Titanium During Electrophoretic Deposition. Materials Science and Engineering: B, 176 (5). 369 - 381. ISSN 0921-5107

Lim, Siang Ying and Mohd Salleh , Mohamad Amran and Mohamed Yusoff, Hamdan and Abdul Rashid, Suraya and ABD RAZAK , JEEFFERIE (2011) Continuos production of carbon nanotubes - A review. Journal of Industrial and Engineering Chemistry, 17. pp. 367-376. ISSN 1226-086X

Loh, Ser Lee and Salleh, Shaharuddin and Sarmin, Nor Haniza (2011) Partitioning Technique for Transformation of Connected Graphs into Single-Row Network. Jurnal Teknologi . pp. 241-253. ISSN 2180-3722

Low , Yin Fen (2011) A performance study of the wavelet-phase stability (WPS) in auditory selective attention. Brain Research Bulletin, 86 (1-2). pp. 110-117. ISSN 0361-9230

M., Zulkiflee and Asmai, Siti Azirah and N., Haniza and Ayop, Zakiah and Sahib@Sahibuddin, Shahrin (2011) Behavioral analysis on IPv4 malware on different platforms in IPv6 network environment. IEEE Conference on Open Systems (ICOS). pp. 74-79. ISSN -

M., Zulkiflee and Mohd Faizal Abdollah, Faizal M.A. and IOM, Fairuz and Abu, Nur Azman and Sahib@Sahibuddin, Shahrin (2011) Behavioral analysis on IPv4 malware in both IPv4 and IPv6 network environment. International Journal of Computer Science and Information Security (IJCSIS). pp. 10-15. ISSN 1947-5500

M., Zulkiflee and Abdollah, M. F. and Othman, M. F. I. and Abu, Nur Azman and Sahib, S. (2011) Behavioral Analysis on IPv4 Malware in both IPv4 and IPv6 Network Environment. International Journal of Computer Science and Information Security. ISSN 1947-5500

M., Zulkiflee and M.A, Faizal and I.O, Mohd Fairuz and Abu, N. A. and Sahib, S. (2011) Behavioral Analysis on IPv4 Malware in both IPv4 and IPv6 Network Environment. International Journal of Computer Science and Information Security, 9 (2). ISSN 1947-5500

M.A., Burhanuddin and halawani, sami and A.R., Ahmad (2011) A Costing Analysis For Decision Making Grid Model In Failure-Based Maintenance. Advances in Decision Sciences, 1 (1). pp. 1-15. ISSN 10.1155/2011/205039

M.Y, YUHAZRI and P.T, Phongsakorn and I.P, Haeryip Sihombing and A.R., Jeefferie and A. P., Puvanasvaran and A.M, Kamarul and Rassiah, Kannan (2011) Mechanical Properties of Kenaf/Polyester Composites. International Journal of Engineering & Technology, 11 (1). pp. 127-131. ISSN 2077-1185

M.Zamberi, Mahanum and Ayob, Md Razali (2011) Experimental Study on Low Cost Biodiesel Production Alkaline Based Catalysts by Using Frying Oil. Journal of Engineering and Technology, 2. pp. 55-65. ISSN 2180-3811

MUSA@OTHMAN, MASJURI (2011) Development of Model System for Cost-Effective Pico-Hydro Turbine. Development of Model System for Cost-Effective Pico-Hydro Turbine. pp. 17-21. ISSN 978-1-4577-0340-9

Mat, Shafizal and Salim, Mohd Azli (2011) The Performance Improvement for Plenum Inside Intake Manifold in Automotive Vehicles Engine. Journal of Electrical and Mechanical Engineering, 2 (1). pp. 13-20. ISSN 2010-1635

Mat, Shafizal and Salim, Mohd Azli and Wan Mohd Farid , Wan Mohamad and Md. Saifuddin, Md Yusop (2011) Design and Ergonomics Analysis of Cutter Machine Locking Device in Aerospace Industry. Journal of Materials Science and Engineering, 5 (2). pp. 145-154. ISSN 1934-8959

Mat Lazi, Jurifa and Ibrahim, Zulkifilie and Sulaiman , Marizan (2011) Mean And Diffrential Torque Control Using Hysteresis Current Controller For Dual PMSM Drives. Journal of Theoretical and Applied Information Technology, 33 (1). pp. 76-82. ISSN 1992-8645

Md Saat, Mohd Shakir (2011) Static output feedback controller design for uncertain polynomial systems: an iterative sums of squares approach. IET Control Theory and Applications. pp. 1079-1084. ISSN 1751-8644

Md Sani, Zamani (2011) Automated Intelligent real-time system for aggregate classification. International Journal of Mineral Processing, 100. pp. 41-50. ISSN 0301-7516

Md. Shah, W. and Ishmael , J. and J.P. Race, N. (2011) Reducing Cost and Contention of P2P Live Streaming through Locality and Piece Selection. PGNet 2011. ISSN 978-1-902560-25-0

Minhat, Mohamad (2011) A Framework for a Development of an Intelligent CNC Controller Based on STEP-NC. Advanced Materials Research , 383 - . pp. 984-989. ISSN 10.4028/www.scientific.net/AMR.383-390.984

Misron, Norhisam and Masruni, Norafiza and Abdul Shukor, Fairul Azhar and Mailah, Nashiren and Wakiwaka, Hiroyuki and Nirei, Masami (2011) Optimization of pole numbers and rotor size for a single phase slot-less permanent magnet generator. International Review of Electrical Engineering (I.R.E.E.). pp. 2253-2260. ISSN 1827-6679

Misron, Norhisam and Mat Saad, Ezril Hashim and Raja Othman, Raja Nor Firdaus Kashfi and Abdul Shukor , Fairul Azhar and Wakiwaka, Hiroyuki and Nirei, Masami (2011) Positioning system for sensor less linear DC motor. Journal of the Japan Society of Applied Electromagnetics and Mechanics (JSAEM), 19. S91-S94. ISSN 2187-9257

Mohamad, Ahmad Kamely and Sued, Mohammad Kamil and Chong, Wan Chin (2011) Mathematical modeling of surface roughness in surface grinding operation. International Journal of Engineering and Natural Sciences , 5 (3). pp. 146-149. ISSN 2010-4014

Mohamad, Ahmad Kamely and Sued, Mohammad Kamil and Chong, Wan Chin (2011) Mathematical modeling of surface roughness in surface grinding operation. International Journal of Engineering and Natural Sciences, 5 (3). pp. 146-149. ISSN 2010-4014

Mohamad, Mohd Sharif and Hasan Basari, Abd Samad and Hussin, Burairah (2011) Utilizing analytical hierarchy process for pauper house programme in Malaysia. International Journal for Advances in Computer Science, 2 (1). pp. 11-19. ISSN 2218-6638

Mohamad, Noraiham (2011) Investigation on Impact Fracture of Epoxidized Natural Rubber-Alumina Nanoparticle Composites (ENRAN). Global Engineers & Technologist Review, 1 (2). pp. 26-34. ISSN 2231-9700

Mohamad Jaya, Abdul Syukor and Hasan Basari, Abd Samad and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Muhd. Razali and Abd. Rahman, Md. Nizam (2011) Application of ANFIS in Predicting of TiAlN Coatings Hardness. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1647-1657. ISSN 1991-8178

Mohamad Jaya, Abdul Syukor and Hasan Basari, Abd Samad and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Mohammad, Muhd. Razali and Abd. Rahman, Md. Nizam (2011) Application of ANFIS in Predicting of TiAlN Coatings Hardness. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1647-1657. ISSN 1991-8178

Mohammed Napiah, Zul Atfyi Fauzan and Ja'afar, Abd Shukur (2011) Current-Voltage Analysis of Nanoscale Planar and Vertical MOSFET Incorporating Dielectric Pocket. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 3 (2). pp. 41-46. ISSN 2180-1843

Mohd Abid, Mohd Asyadi Azam (2011) Direct Growth of Vertically-Aligned Single-Walled Carbon Nanotubes on Conducting Substrates using Ethanol for Electrochemical Capacitor. Journal of New Materials for Electrochemical Systems, 14 (3). pp. 173-178. ISSN 1480-2422

Mohd Abid, Mohd Asyadi Azam (2011) Growth of vertically aligned single-walled CNTs using alcohol catalytic CVD method. Journal of Industrial Technology SIRIM, 19 (2). 0-0. ISSN 0128-4940

Mohd Abid, Mohd Asyadi Azam (2011) Thermally oxidized aluminum as catalyst-support layer for vertically aligned single-walled carbon nanotube growth using ethanol. Applied Surface Science, 258. pp. 873-882. ISSN 0169-4332

Mohd Abid, Mohd Asyadi Azam (2011) Towards realization of high performance electrochemical device using vertically-aligned single-walled carbon nanotubes grown from ethanol. Global Engineers & Technologists Review, 1 (2). pp. 1-8. ISSN 2231-9700

Mohd Afzanizam, Mohd Rosli and Akop, Mohd Zaid and Mansor, Muhd Ridzuan and Sivarao, Subramonian (2011) Development of a Stand-alone Solar Powered Bus Stop. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (2). pp. 55-66. ISSN 2180-1053

Mohd Fazli, Mohd Sam and Md Nor Hayati, Tahir and Kamarudi, Abu Bakar (2011) Role of ICT Innovation in Facilities Management SErvices in Malaysia. 2nd International Conference on Business and Economic Research Proceeding (2nd ICBER 2011). pp. 977-985. ISSN ISBN 967-5705-02-01

Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Noorhazirah, Sunar and Kamaruzaman, Jusoff (2011) controller. The result shows that the proposed controller reduced the overshoot and steady state error of the pneumatic actuator system to no overshoot and 0.025mm respectively. Index terms: System identification, recursive least square, ARX, dead zone compensator, pneumatic actuator. Non-linear Modeling and Cascade Control of an Industrial Pneumatic Actuator System, 5 (8). pp. 465-477. ISSN 1991-8178

Mohd Rosli, ZULKIFLI and ayoob, N.F and Jariah, Mohamad Juoi and rosli, N.R (2011) Caharacterisation and properties of sintered glass-ceramics produced from recycling glass by using pressure-less method Characterisation and Properties of sintered Glass-Ceramics Produced from recycling Glass by using Presurre-less Method. Key Engineering Materials. pp. 933-938. ISSN 1013-9826

Mohd Saad, Norhashimah and Abdullah, Abdul Rahim (2011) Brain lesion segmentation from diffusion weighted MRI based on adaptive thresholding and gray level co-occurrence matrix. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) . pp. 1-13. ISSN 2180-1843

Mohd Said, Muzalifah and Zainudin, Muhammad Noorazlan Shah and Mohammed Napiah, Zul Atfyi Fauzan and Mohd Noh, Zarina and Mohamad Yatim, Norhidayah (2011) Micromachining Process for Fiber Optic Pressure Sensor's. Applied Mechanics and Materials, 52-54. pp. 2060-2064. ISSN 1660-9336

Muda, A. K. and Yun-Huoy, C. and Muda, N. A. (2011) A Comparative Study of Feature Selection Methods for Authorship Invarianceness in Writer Identification. International Journal of Computer Information Systems and Industrial Management Applications, Volume 4 (2012). pp. 467-476. ISSN 2150-7988

Muda, A. K. and Yun-Huoy, C. and Muda, N. A. (2011) Computationally Inexpensive Sequential Forward Floating Selection for Acquiring Significant Features for Authorship Invarianceness in Writer Identification. International Journal on New Computer Architectures and Their Applications (IJNCAA) 1(3): 581-598, 3 (1). pp. 581-598. ISSN 2220-9085

Muda, N. A. and Ahmad, S. and Muda, A. K. (2011) A Bio-Inspired Music Genre Classification Framework using Modified AIS-Based Classifier. International Journal of New Computer Architectures and their Applications (IJNCAA), 1 (2). pp. 304-315. ISSN 2220-9085 (online)

Munir, F.A. and Azmi, M.I.M and Zin, M.R.M and Salim, M.A. and Sidik, N.A.C (2011) Application of lattice boltzmann method for lid driven cavity flow. International Review of Mechanical Engineering, 5 (5). pp. 856-861. ISSN 1970-8734

Munir, F.A and M. Azmi, M.Irwan and M. Zin, Mohd Rody and Salim, M.A and Hassan, Muhammad Zahir (2011) Preliminary design of carbon composite facing for dry clutch disc of mini agricultural tractor. International Review of Mechanical Engineering, 5 (4). pp. 577-580. ISSN 1970-8734

Munir, F.A and Sidik, N.A.C and N.I.N, Ibrahim (2011) Numerical Simulation of Natural Convection in an Inclined Square Cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Muslim, Z. and Abdollah, M. F. and Osman, M. F. I. and Abu, N. A. and Sahib, S. (2011) Behavioral Analysis on IPv4 Malware in both IPv4 and IPv6 Network Environment. International Journal of Computer Science and Information Security, 9 (2). 010-015. ISSN 1947-5500

Muslim, Z. and Abdollah, M. F. and Sahib, S. and Abu, N. A. (2011) Behavioral analysis on IPV4 Malware in both IPV4 and IPv6 Network Environment. (IJCSIS) International Journal of Computer Science and Information Security, Vol 9,. ISSN 1947-5500

N., Haniza and M., Zulkiflee and Shibghatullah, Abdul Samad and Sahib, Shahrin (2011) Analysis on Differential Router Buffer Size towards Network Congestion. International Journal of Computer Science and Information Security. pp. 1-5. ISSN 1947-5500

Nahar, H. and Muslim, Z. and Shibghatullah, A. S. and Sahib, S. (2011) Analysis on Differential Router Buffer Size towards Network Congestion: A Simulation-based. (IJCSIS) International Journal of Computer Science and Information Security, Vol. 9 (No. 5). pp. 1-5. ISSN 1947-5500

Nahar, H. and Muslim, Z. and Shibghatullah, A. S. and Sahib, S. (2011) Congestive Loss in Wireless Ad hoc Network: Network Performance Analysis. World of Computer Science and Information Technology Journal (WCSIT), 1 (No. 6). pp. 269-273. ISSN 2221-0741

Nur Rifhan , Rosli and Azizah , Shaaban and Jariah , Mohamad Juoi and Nur Farizan , Ayoob (2011) Characterisation and Properties of Sintered Recycled Glass utilising CIP Method. Key Engineering Materials, 471-47. pp. 245-250. ISSN 1013-9826

Omar, Rosli and Abdul Rahim, Nasrudin (2011) Modeling and simulation of new configuration of dynamic voltage restorer for power quality improvement. Simulation of the Society for Modeling and Simulation International, 87 (4). pp. 351-359. ISSN 0037-5497

Omar, Rosli and Rahim, Nasrudin (2011) New Topology of a Three Phase Dynamic Voltage Restorer (DVR) for Voltage Swells Mitigation in Electrical Distribution System. Journal of Electrical Engineering, 11 (edition 3). ISSN 1582-4594

Omar, Rosli and Rahim, Nasrudin and Ahmad, Azhar (2011) Voltage Swells Improvement in Low Voltage Network Using Dynamic Voltage Restorer. American Journal of Applied Sciences, 8 (1). pp. 55-62. ISSN 1546-9239

Omar, Rosli and Sulaiman , Marizan (2011) Dynamic Voltage Restorer Application for Power Quality Improvement in Electrical Distribution System: An Overview. Australian Journal of Basic and Applied Sciences, 5 (12). pp. 379-396. ISSN 1991-8178

Omar, Norliza and Abdul Latif, Muhammad Pauzi (2011) Keberkesanan Kempen Perhubungan Awam (PR) Dalam Mempromosikan Universiti Teknikal Malaysia Melaka (UTeM). Journal of Human Capital Development, Vol. 4 (No.2). pp. 75-86. ISSN 1985-7012

Omar, Rosli and Rahim, Nasrudin (2011) Three phase inverter control using DSP controller for dynamic voltage restorer (DVR) application. International Journal of the Physical Sciences, 6 (5). pp. 1096-1111. ISSN 1992-1950

Omar, Rosli and Rahim, nasrudin (2011) Modeling and simulation of new configuration of dynamic voltage restorer for power quality improvement. Transactions of The Society for Modeling and Simulation International, 87 (4). pp. 351-359. ISSN 0037-5497

Ong, K.Y. and SAID, MD RADZAI (2011) A Study on the Deposition of Tin on the Contac ts Subjected to High Frequency Impac t Loading in Semiconductor Device Testing. Journal of Mechanical Engineering and Technology, 3 (1). pp. 1-9. ISSN 2180-1053

Othman , A. R and Hamidon , A. H and Husain , M.N and Johal , M.S and Ibrahim , A.B (2011) Wideband 5.8 GHz Radio Frequency Amplifier with 3 dB Π- Network Attenuator Isolation. JTEC, Vol. 3 (No. 1). pp. 1-6. ISSN 2180 - 1843

Patakor, Fizatul Aini and Sulaiman , Marizan and Ibrahim, Zulkifilie (2011) Comparison Performance Of Induction Motor Using SVPWM And Hysteresis Current Controller. Journal of Theoretical and Applied Information Technology, 30 (1). pp. 10-17. ISSN 1992-8645

Pratiwi, Lustiana and Choo, Yun Huoy and Draman @ Muda, Azah Kamilah (2011) A Comparative Performance Analysis of Gaussian Distribution Functions in Ant Swarm Optimized Rough Reducts. International Journal on New Computer Architectures and Their Applications (IJNCAA), 1 (4). pp. 917-933. ISSN 2220-9085

Putra, Azma (2011) Radiation efficiency of unbaffled and perforated plates near a rigid reflecting surface. Journal of Sound and Vibration, 330. pp. 5443-5459. ISSN 0022-460X

Putra, Azma and Ayob, Md Razali (2011) Sound Transmission Loss of a Double-Leaf Solid-Microperforated Partition Under Normal Incidence of Acoustic Loading. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 12 (3). pp. 162-174. ISSN 1511-788X

Putra, Azma (2011) Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method. Advanced Science Letters, 19 (1). pp. 142-146. ISSN 1936-6612

Rafidah, Hasan and Mines, Robert and Fox, Peter (2011) Characterization of selectively laser melted Ti-6Al-4 V micro-lattice struts. Procedia Engineering , 10. pp. 536-541. ISSN 1877-7058

Rafidah, Hasan and Mines, Robert A.W. and Shen, Eva and Tsopanos, Sozon and Cantwell, Wesley (2011) Comparison On Compressive Behaviour Of Aluminium Honeycomb And Titanium Alloy Micro Lattice Blocks. Key Engineering Materials, 462-46. pp. 213-218. ISSN 1013-9826

Rafrastara, Fauzi Adi and M. A, Faizal (2011) Advanced Virus Monitoring and Analysis System. (IJCSIS) International Journal of Computer Science and Information Security, Vol. 9, No.1, 2011. ISSN 1947-5500

Rahmat, Mohd Fua'ad and Has, Zulfatman and Husain, Abdul Rashid and Md Sam, Yahya and Ishaque, Kashif and Ghazaly, Rozaimi and Md Rozali, Sahazati (2011) Modeling and controller design of an industrial hydraulic actuator system in the presence of friction and internal leakage. International Journal of the Physical Sciences, 6 (14). pp. 3502-3517. ISSN 1992 - 1950

Raja, Izamshah (2011) Deflection Prediction on Machining Thin- Walled Monolithic Aerospace Component. Journal of Mechanical Engineering and Technology. ISSN 2180 – 1053

Raja, Izamshah (2011) Finite Element Analysis of Machining Thin-Wall Parts. Key Engineering Materials. pp. 283-289. ISSN 1013-9826

Rajiani, Ismi (2011) A Cultural Ecology of New Public Management in Indonesia. Journal of Administrative Science, 8 (1). pp. 17-31. ISSN 1675-1302

Raminosoa, Tsarafidy and Gerada, Christopher and Othman, Md Nazri and De Lillo, Liliana (2011) Rotor losses in fault-tolerant permanent magnet synchronous machines. IET Electric Power Applications, 5 (1). pp. 75-88. ISSN 1751-8660 (Submitted)

Ramlan, Roszaidi and Brennan, Michael John and Mace, Brian R. (2011) On the optimum parameters of a device for harvesting energy from running and walking. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 225 (4). pp. 510-521. ISSN 0959-6518

Ranjit, S.S.S. and Anas, S.A. and Tan, CheeFai (2011) Off-Grid System Development for House Car Pouch Lighting. International Journal of Soft Computing and Engineering (IJSCE). pp. 179-184. ISSN 2231-2307

Rassiah, Kannan and Chik, Mohd As'ri and Yaakob, Mohd Yuhazri and Haeryip Sihombing (2011) Effect on mechanical properties of hybrid blended coconut coir/paraffin wax/LDPEE. International Journal of Integrated Engineering, 3 (2). pp. 63-67. ISSN 2229-838X

S. S. S. , Ranjit and S. K. , Subramaniam and S. I. , Md Salim (2011) Motion Vector Estimation Search using Hexagon-Diamond Pattern for Video Sequences, Grid Point and Block-Based. Motion Vector Estimation Search using Hexagon-Diamond Pattern for Video , 11 (2). pp. 42-47. ISSN 1473-804x

Safei, Su'aidi (2011) "Guru Tahfiz Buta Huruf", Kolum "Setempat". Akhbar Harian Metro. p. 1. ISSN 01266675

Sahib, Shahrin and Abdullah, Raihana Syahirah and Mas'ud, Mohd Zaki and Abdollah, Mohd Faizal and Robiah, Yusof (2011) Recognizing P2P Botnets Characteristics Through TCP Distinctive Behaviour. International Journal of Computer Science and Information Security (IJCSIS), 9 (12). pp. 7-11. ISSN 1947-5500

Said, Mohamed Azmi (2011) PMSM Rotor Speed and Position Estimator. Proceedings of the 2nd UMPEDAC Postgraduate Students Renewable Energy Symposium. pp. 85-90. ISSN ISBN 978-967-10842-0-5

Saipullah, Khairul Muzzammil (2011) The Pruning of Combined Neighborhood Differences Texture Descriptor for Multispectral Image Segmentation. International Journal of Computer Technology and Electronics Engineering, 1 (3). pp. 1-6. ISSN 2249-6343

Saipullah, Khairul Muzzammil (2011) A Robust Texture Feature Extraction using the Localized Angular Phase. Multimedia Tools and Applications. pp. 717-747. ISSN 1380-7501

Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir , Fudhail (2011) PID Controller for Vibration Reduction and Performance Improvement of Handheld Tools. International Journal of Mechanical and Mechatronics Engineering, 11 (2). pp. 7-16. ISSN 2077-124X

Salim, Mohd Azli and Noordin, Aminurrashid and Akop, Mohd Zaid (2011) Development of a Free-Free Transverse Beam Model Using Lateral Vibrations of Beam Conventional Method during Seismic Activity. Journal of Mathematics Research, 3 (3). pp. 77-82. ISSN 1916-9795

Salim, Mohd Azli and Noordin, Aminurrashid and Mohamad Zin, Mohd Rody and Karjanto, Juffrizal (2011) The New Generation of Building Control Concept to Suppress the Horizontal Vibration during the Earthquake. Australian Journal of Basic and Applied Sciences, 5 (4). pp. 16-25. ISSN 1991-8178

Salim, Mohd Azli (2011) Mathematical Modeling of Structural Integrity on High Rise Building Using Parallel Axis Theorem and Finite Element Analysis. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 73-82. ISSN 2010-1791

Salim, Mohd Azli and Abdul Munir, Fudhail and Razali, Nadlene and Mat Nuri, Nur Rashid and Mohamad Zin, Mohd Rody (2011) Preliminary Study - Analytical Approach in Experimental Rig of Automotive Flexible Wiper System. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 64-72. ISSN 2010-1791

Salim, Mohd Azli and Noordin, Aminurrashid (2011) Implementation of Active Force Control to Reduce Vibration Displacement in Active Mass Damper during Seismic Activity. Journal of Instrument, 2 (1). pp. 1-10. ISSN 2010-1856

Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir, Fudhail (2011) Development of Low Cost High Rise Building using Austenitic-Ferritic Material in Nano-Scale Environmental Challenges to Sustain a Green. International Review of Mechanical Engineering, 5 (4). pp. 784-791. ISSN 1970-8734

Salim, Mohd Azli and Nordin, Aminurrashid (2011) Dynamic Response on Free-Free Beam in Driving Point and Transfer Mobility Measurement under Bending Load. Journal of Civil Engineering and Architecture, 5 (3). pp. 248-257. ISSN 1934-7359

Saptari, Adi and Salleh, Mohd Rizal and Wong, Soon Lai (2011) Jig Design,Assembly Line Design And Work Station Design And Their Effect To Productivity. Jordan Journal of Mechanical and Industrial Engineering, 5 (1). pp. 9-16. ISSN 1995-6665

Sarban Singh, Ranjit Singh and Anas, Siti Aisyah and Tan, Chee Fai (2011) Off-Grid System Development for House Car Pouch Lighting. International Journal of Soft Computing and Engineering, 1 (4). pp. 179-184. ISSN 2231-2307

Sazelin , Arif and Ridzwan, Ahmad (2011) Food quality standards in developing quality human capital: An Islamic perspective. African Journal of Business Management, 5 (31). pp. 12242-12248. ISSN 1993-8233

Sek, Yong Wee and Lau, Siong Hoe and Teoh, Kung Keat and Law, Check Yee and Parumo, Shahril (2011) Prediction Of User Acceptance And Adoption Of Smart Phone For Learning With Technology Acceptance Model. Journal of Applied Sciences, 10 (20). pp. 2395-2402. ISSN 1812-5654

Selamat, Mohd Zulkefli and Sahari, Jaafar and Muhamad, Norhamidi and Muchtar, Andanastuti (2011) The Effects of Thickness Reduction and Particles Sizes on the Properties Graphite - Polypropylene Composite. International Journal of Mechanical and Materials Engineering , 6 (2). pp. 194-200. ISSN (ISSN 1823-0334)

Selamat, Mohd zulkefli and Sahari, Jaafar and Muhamad, Norhamidi and Muchtar, Andanastuti (2011) Simultaneous Optimization for Multiple Responses on the Compression Moulding Parameters of Composite Graphite–Polypropylene Using Taguchi Method. Key Engineering Materials, 471-47 (1). pp. 361-366. ISSN 1013-9826

Shamsudin, Shamsul Anuar (2011) Kinematic Synthesis of Planar, Shape-Changing Rigid Body Mechanisms for Design Profiles with Significant Differences in Arc Length. ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2011) , 6. pp. 325-334. ISSN 978-0-7918-5483-9

Sihombing, Haeryip (2011) The Higher Education Students Experience with Technology. Asian Transactions on Basic & Applied Sciences, 1 (3). pp. 1-10. ISSN 2221-4249

Sihombing, Haeryip and Yaakob, Mohd Yuhazri and Safarudin, Mochamad (2011) The Business Perspectives Strategy Towards the TKI (Indonesian Migrant Workers) Market. Journal of Indonesian Economy and Business (JIEB), 26 (1). pp. 64-89. ISSN 2085-8272

Sihombing, Haeryip and Yaakob, Mohd Yuhazri and Safarudin, Mochamad (2011) Developing of World Class Company's Differentiated Competitive Advantage through Human Capital Development. Jurnal Megadigma, 4 (1). pp. 17-48. ISSN 1979-9055

Sihombing, Haeryip and Yaakob, Mohd Yuhazri and Safarudin, Mochamad (2011) Public Sector Development on Human Capital through Fitted Management. Jurnal Ilmu Administrasi (JIA), 7 (1). pp. 33-56. ISSN 1412-4246

Sihombing, Haeryip and Yaakob, Mohd Yuhazri and Vasu, Suresh (2011) Peningkatan Mutu Molding Injeksi dengan Metode DMAIC Six Sigma. Jurnal Pasti (Penelitian dan Aplikasi Sistem & Teknik Industri) , 4 (3). 01-14. ISSN 2085-5869

Sivarao, Subramonian and Mohd Rizal , Salleh and Ahmad, Kamely and Tajul Ariffin, Abdullah and Taufik, - (2011) Mechanical Properties Modification of Polyethylene (PE) for CaCO3 Particulated Composites. Advanced Materials Research, 264-26. pp. 880-887. ISSN 10226680

Sivarao, Subramonian and Mohd Rizal , Salleh and Ahmad , Kamely and Tajul , Arifin and Taufik, , (2011) Characterizing Chicken Eggshell Reinforced Polypropylene (PP). Advanced Materials Research, 264-26. pp. 871-879. ISSN 1662-8985

Strangeways, Hal J. and Ho, Yih Hwa and Aquino, Marcio H. O. and Elmas, Zeynep G. and Marques, Haroldo Antonio and Monico, Joao Francisco Galera and H. A. Silva (2011) On determining spectral parameters, tracking jitter, and GPS positioning improvement by scintillation mitigation. RADIO SCIENCE, 46. ISSN 0048–6604

Sulaiman, Hamzah Asyrani and Bade, Abdullah (2011) Continuous collision detection for virtual environments: A walkthrough of techniques. Journal of Computer Science and Information Technology (eJCSIT), 3 (1). pp. 1-7. ISSN 1985-7721

Sulaiman, Hamzah Asyrani and Bade, Abdullah (2011) The construction of balanced bounding-volume hierarchies using spatial object median splitting method for collision detection. International Journal of New Computer Architectures and their Applications (IJNCAA), 1 (2). pp. 396-403. ISSN 2220-9085

Sulaiman , Marizan and Ibrahim, Zulkifilie and Patakor, Fizatul Aini (2011) COMPARISON PERFORMANCE OF INDUCTION MOTOR USING SVPWM AND HYSTERESIS CURRENT CONTROLLER. Journal of Theoretical and Applied Information Technology, 30 (1). pp. 10-17. ISSN 1992-8645

Sutikno, Tole and Jidin, Auzani and Jidin, Aiman Zakwan and Nik Idris, Nik rumzi (2011) FPGA Based High Performance Torque and Flux Estimator. International Review of Electrical Engineering (IREE), 6 (1). pp. 207-214. ISSN 1827- 6660

Sutikno , Tole and Jidin, Auzani and Nik Idris, Nik Rumzi (2011) A New Fixed Switching Frequency Direct Torque Controlled PMSM Drives with Low Ripple in Flux and Torque. ITB Journal, 43 (3). pp. 173-190. ISSN 1978-3051

T., Joseph Sahaya Anand and A., H.W. Ngan (2011) NANOSTRUCTURAL STUDIES OF SPUTTER-DEPOSITED NixAl1-x (0.5 ≤ x ≤ 1.0) ALLOY THIN FILMS. Malaysian Journal of Microscopy, 7. pp. 221-227. ISSN 1823 7010

T., Joseph Sahaya Anand and S,, Shariza (2011) Effect of Deposition Time on the Structural and Optical Properties of Molybdenum Chalcogenides Thin Films. Chalcogenide Letters, 8 (9). pp. 529-539. ISSN ISSN 1584-8663

T., Joseph Sahaya Anand and Sivarao, Subramonian and K. Ganesh Kumar,, gnsh_gaara@yahoo.com (2011) A Novel Intermetallic Nickel Aluminide (Ni3Al) as an Alternative Automotive Body Material. International Journal of Engineering & Technology, 11 (1). pp. 274-282. ISSN ISSN: 2077-1185 (Online) 2227-2712 (Print) Impact Factor=0.4245

Tahir, Zulkifli and M.A., Burhanuddin and Anton, S P (2011) An Analytic Hierarchy Process Approach for Maintenance Strategy in Small and Medium Industries. Makassar International Conference on Electrical Engineering and Informatics, 3. pp. 311-316. ISSN 1

Tan, CheeFai and Mohd Rizal, Alkahari and Ranjit Singh, Sarban Singh (2011) Water pressure loss analysis of mobile machine for fire figthing purpose. International Journal of Soft Computing and Engineering (IJSCE). pp. 437-440. ISSN 2231-2307 (Submitted)

Tan, CheeFai and Sarban Singh, Ranjit Singh and Siti Aisyah, Anas (2011) Truck seating comfort: objectify and subjectify measurement approach. International Journal of Soft Computing and Engineering (IJSCE), 1 (5). pp. 1-6. ISSN 2231-2307

Taufik, Roni Sahroni and Hambali, Arep@Ariff (2011) Design and Simulation on Investment Casting Mold for Metal Matrix Composite Material. Journal of Applied Mechanics and Materials, 66-68. pp. 1676-1681. ISSN 1660-9336

Taufik, Roni Sahroni and Hambali, Arep@Ariff and Tajul Ariffin , Abdullah and Md Dan, Md Palil (2011) Design of Car Heat Remover Based on Product Design and Development Methodology. Journal of Advanced Manufacturing Technology (JAMT) , 5 (2). pp. 59-68. ISSN 1985-3157

Taufik, Roni Sahroni and Mohd Rizal , Salleh and Hambali, Arep@Ariff (2011) Nonlinear Thermal Expansion Model for SiC/Al. World Academy of Science, Engineering and Technology, 78. pp. 923-927. ISSN 1307-6884

Taufik, Roni Sahroni and Tajul Ariffin, Abdullah (2011) Design Simulation of Filing Sequence and Solidification Time for Cast Metal Matrix Composite by Low Pressure Die Casting. International Review of Mechanical Engineering Journal (I.RE.M.E.), 5 (20). pp. 315-320. ISSN 19708734

Taufik, Roni Sahroni and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2011) Design and Simulation on Compressor Metal Matrix Composite by Investment Casting. Advanced Materials Research, 264-26. pp. 403-408. ISSN 10226680

Taufik, Roni Sahroni and Tajul Ariffin , Abdullah and Sivarao, Subramonian (2011) Design and Simulation on Cast metal Matrix Composite by Investment Casting. Advanced Materials Research, 264-26. pp. 323-328. ISSN 10226680

Thet, Thet Mon and Junid , Ramli and ABD RAZAK , JEEFFERIE and Sarif, Safian and V.C., Venkatesh (2011) Performance of Cryogenic Machining wih Nitrogen Gas in Machining of Titanium. Applied Mechanics and Materials - Advances in Mechanical Engineering, 52-54. pp. 2003-2008. ISSN 1662-7482

Tsubokura, Makoto and Cheng, See Yuan and Nakashima, Takuji and Nouzawa, Takahide and Okada, Yoshihiro (2011) A Numerical Analysis Of Transient Flow Past Road Vehicles Subjected To Pitching Oscillation. Journal of Wind Engineering and Industrial Aerodynamics, 99 (5). pp. 511-522. ISSN 01676105

W. Daud, W. M. Bukhari and Sudirman, R and Al Haddad, A (2011) Wavelet Frequency Energy Distribution of Electrooculogram Potential Towards Vertical and Horizontal Movement. 2010 Second International Conference on Computational Intelligence, Modelling and Simulation (CIMSiM), . pp. 326-329. ISSN 978-1-4244-8652-6

W. Daud, W. M. Bukhari and Sudirman, Rubita (2011) Wavelet Frequency Estimation Parameter Of Energy Distribution For Electrooculograph Signal Analysis. Jurnal Teknologi , 54 Spe. pp. 299-309. ISSN 2180-3722

W. Daud, W. M. Bukhari and Sudirman, Rubita and Omar, Camallil (2011) Identification of Electrooculography Signals Frequency Energy Distribution Using Wavelet Algorithm. Journal of Computer Science, Volume (Issue ). pp. 1619-1625. ISSN 1549-3636

Wahjono, Sentot Imam (2011) Kepemimpinan Transformational Di Sekolah Sekolah Muhammadiyah. Jurnal Manajemen Bisnis, 1 (1). pp. 75-87. ISSN 2089-0176

Wan Daud, Wan Mohd Bukhari (2011) Wavelet Approach on Frequency Energy Distribution of Electrooculography Potential Towards Direction. Internetworking Indonesia Journal, 3 (1). pp. 3-10. ISSN 1942-9703

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and A.G., Jaharah (2011) Improving Production Line Performance:A case study. Applied Mechanics and Materials, 44-47. pp. 4136-4140. ISSN 1660-9366

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Ismail, Ahmad Rasdan (2011) Product and Vendor Development Programme in Encouraging Supply Chain Management: A Case Study. Applied Mechanics and Materials, 44-47. pp. 4141-4145. ISSN 1660-9366

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Mazli, Husiah (2011) Maintenance management system for upstream operations in oil and gas industry: a case study. Int. J. Industrial and Systems Engineering, 9 (3). pp. 317-329. ISSN 1748-5037

Wan Mahmood, Wan Hasrulnizzam and Mat Tahar, Nurulain and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) Supply chain enhancement through product and vendor development programme. Journal of Modelling in Management, 6 (2). pp. 164-177. ISSN 1746-5664

Wan Mohd Ghazali, Khadijah and Hassan, Rosilah (2011) Flooding Distributed Denial of Service Attacks-A Review. Journal of Computer Science, 7 (8). pp. 1218-1223. ISSN 1549-3636

Wan Mohd Ghazali, Khadijah and Hassan, Rosilah (2011) Flooding Distributed Denial of Service Attacks-A Review. Journal of Computer Science, 7 (8). pp. 1218-1223. ISSN 1549-3636

Wan Muhamad Hatta, S.F. and Abd. Hadi, D. and Soin, N. (2011) Laser Anneal-Induced Effects on the NBTI Degradation of Advanced-Process 45nm high-k PMOS. Advanced Materials Research, 189-19. pp. 1862-1866. ISSN 1662-8985

Widodo, W. Sapto and Wong, C.Y and Kamarul, A.M and Hidayah, Nurul A. (2011) CFD Simulation for Tray Dryer Optimization. Journal of Advanced Manufacturing Technology, Vol. 5 (No. 2). pp. 1-10. ISSN 1985-3157

Y., Mohd Yuhazri and A.R., Jeefferie and I.P, Haeryip Sihombing and O., Nooririnah and A.R, Warikh (2011) Coating Effect Condition on the Corrosion Properties of Mild Steel Substrate. International Journal of Applied Science and Technology, 1 (1). pp. 45-49. ISSN 2221-0997

YAAKOB, MOHD YUHAZRI and IP, HAERYIP SIHOMBING and A.R, JEEFFERIE and A.Z, AHMAD MUJAHID and A.G, BALAMURUGAN and M.N, NORAZMAN and A., SHOHAIMI (2011) Optimization of Coconut Fibers Toward Heat Insulator Applications. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 1 (1). pp. 35-40. ISSN 2231-9700

Yaakob, Mohd Yuhazri and A.R, Jeefferie and I.P, Haeryip Sihombing and S., Siti Rahmah (2011) Effect of Parameter Controlled in Tin Coating on the Mild Steel Substrate. International Journal of Engineering Science and Technology, 3 (3). pp. 2113-2117. ISSN 0975-5462

Yahaya, S.H and Ali, J.M and Abdullah, T.A. (2011) Parametric transition as a spiral curve and its application in spur gear tooth with FEA. International Journal of Electrical and Computer Engineering, 5 (1). pp. 64-70. ISSN 2010-3948

Yahaya, S.H. and Ali, J.M and Arham, M.R (2011) The Analysis of Duct Model Through Structural and Dynamic Schemes. International Journal of Engineering and Applied Sciences, 7 (2). pp. 121-124. ISSN 2010-3980

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Mathematical function optimization using AIS antibody remainder method. International Journal of Machine Learning and Computing, 1 (1). pp. 13-19. ISSN 2010-3700

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) A swarm based artificial immune systems for solving multimodal functions. Applied Artificial Intelligence, 25 (8). pp. 693-707. ISSN 0883-9514

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Artificial Immune System Based Remainder Method for Multimodal Mathematical Function Optimization. World Applied Sciences Journal, 14 (10). pp. 1507-1514. ISSN 1818-4952

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) A hybrid artificial immune systems for multimodal function optimization and its application in engineering problem. Artif. Intell. Rev., Online (Online). ISSN 0269-2821

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) Particle Swarm based Artificial Immune System for Multimodal Function Optimization and Engineering Application Problem. Trends in Applied Sciences Research, 6 (3). pp. 282-293. ISSN 1819-3579

Zainal Abidin, Zaheera and Manaf, Mazani and Shibghatullah, Abdul Samad (2011) A New Model of Securing Iris Authentication Using Steganography. ICSECS 2011. pp. 1-8. ISSN 1865-0929

Zainudin, Muhammad Noorazlan Shah and Mohd Said, Muzalifah and Ismail, Mohd Muzafar (2011) Feature Extraction on Medical Image using 2D Gabor Filter. Applied Mechanics and Materials, 52-54 . pp. 2128-2132. ISSN 1660-9336 (in acceptance letter and journal proceeding)

Zakaria, Kamarul Ariffin (2011) Fatigue Damage Assessment of the Engine Mount Bracket Using a Statistical Based Approach. Advanced Materials Research, 197-19. pp. 1631-1635. ISSN ISSN 1022-6680

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah (2011) The Study on Fatigue Crack Propagation in Metal Using Finite Element Analysis. Key Engineering Materials, 462-46. pp. 657-662. ISSN ISSN 1013-9826

Zakaria, Zahriladha and Hunter, Ian (2011) Substrate Integrated Waveguide Filters Based on Even- And Odd- Mode Predistortion Technique. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), UTeM . pp. 61-71. ISSN 1985-3158

ahmad kamely, mohamad and mohd yusuf, noordin (2011) The Impact of Cutting Tool Materials on Cutting Force. World Academy of Science, Engineering and Technology, 75. pp. 904-907. ISSN 1307-6884

syed mohamed, muhammad syafiq (2011) The Perception of Usability, Ergonomics and Aesthetics for Three Different Types of Tin Snips. International Journal of Applied Science and Technology, 1 (4). pp. 102-106. ISSN 2221-1004

Book Chapter

Abdullah, Norida and Ninggal, Mohd Tajuddin and Nordin, Mohamad Sahari (2011) The relationship between self-esteem, job-search intensity and career decision-making among final year students: An application of structural equation modeling. In: UNSPECIFIED International Association of Technology, Education and development (IATED), 005281-005289.

Ahmad, Mohd Riduan (2011) Cooperative MIMO Systems in Wireless Sensor Networks. In: Radio Communications. INTECH. ISBN 978-953-307-091-9

Ahmad, Mohd Riduan and Dutkiewicz, Eryk and Huang, Xiaojing (2011) Energy efficient cooperative MAC protocols in wireless sensor networks. In: Wireless Sensor Networks. INTECH, Croatia, EU, pp. 1-24. ISBN 978-953-307-325-5

Hassan, Muhammad Zahir and Mohd Irwan, Mohd Azmi and Abdul Munir, Fudhail (2011) Application of Finite Element Analysis For Prediction of Disc Brake Squeal. In: Proceeding of The Fourth International Conference on Modelling and Simulation (ICMS2011). Modelling and Simulation, 2 . World Academic Union (World Academic Press), United Kingdom, pp. 74-77. ISBN 978-1-84626-070-4

Isa, Halim (2011) Development of a Questionnaire for Prolonged Standing Jobs at Manufacturing Industry. In: Advances in Human Factors, Ergonomics, and Safety in Manufacturing and Service Industry. CRC Press Taylor & Francis Group, Boca Raton, Florida, USA., pp. 253-263. ISBN 978-1-4398-3499-2

Isa, Halim (2011) Modeling of an Integrated Workstation Environment for Occupational Safety and Health Application. In: Advances in Ergonomics Modeling and Usability Evaluation. CRC Press Taylor & Francis Group, Boca Raton, Florida, USA., pp. 503-512. ISBN 978-1-4398-3503-6

Juhaini, Jabar and Soosay, Claudine and Othman, Norfaridatul Akmaliah and Tahir, Md. Nor Hayati (2011) Factors Influencing Strategic Technology Alliance Formation of Malaysian Manufacturers. In: Innovation, Management and Service. International Association of Computer Science & Information Technology Press, Singapore, pp. 20-26. ISBN 978-981-08-9175-6

Kok, Swee Leong (2011) SUSTAINABLE ENERGY HARVESTING TECHNOLOGIES – PAST, PRESENT AND FUTURE. In: SUSTAINABLE ENERGY HARVESTING TECHNOLOGIES – PAST, PRESENT AND FUTURE. InTech, Croatia. ISBN 978-953-307-438-2

Mohd Aboobaider, Burhanuddin (2011) An efficient failure-based maintenance decision support system for small and medium industries. In: An Efficient Failure-based Maintenance Decision Support System for Small and Medium Industries. NIL, 1 (NIL). InTech Open Access Publisher, Rijeka, Crotia, pp. 195-210. ISBN 978-953-308-65-7

Muda, A. K. and Nurul A., Emran (2011) Comparison of Feature Dimension Reduction Approach for Writer Verification. In: Proceedings of the First International Conference on Advanced Data and Information Engineering (DaEng-2013). Springer, pp. 92-102.

Nora, Danish and Schumacher, Micheal and Lee, Chong We1 and Subramaniam, Ramakhrisnan (2011) Ecosystems of the world. In: UNSPECIFIED UNSPECIFIED, pp. 22-44.

Omar, Rosli and Sulaiman , Marizan (2011) Performance of Modification of a Three Phase Dynamic Voltage Restorer (DVR) for Voltage Quality Improvement in Electrical Distribution System. In: POWER QUALITY MONITORING,ANALYSIS AND ENHANCEMENT. InTech, Janeza Trdine 9,51000 Rijeka,Croatia, pp. 304-324. ISBN 978-953-307-330-9

Pratiwi, Lustiana and Choo, Yun Huoy and Draman @ Muda, Azah Kamilah (2011) An empirical study of density and distribution functions for ant swarm optimized rough reducts. In: Software Engineering and Computer Systems. Springer Berlin Heidelberg, pp. 590-604. ISBN 978-364222190-3

Rajiani, Ismi (2011) Green product in Malaysia: Still a long way to go. In: UNSPECIFIED FONA-Social Ecological Research and German Federal Ministry of Education and Research (BMBF), p. 43.

S. S. S. , Ranjit (2011) Block based motion vector estimation using fuhs16 uhds16 and uhds8 algorithms for video sequence. In: Block based motion vector estimation using fuhs16 uhds16 and uhds8 algorithms for video sequence. Search Algorithms and Applications, 12 (12). InTech OpenPublisher, Croatia, pp. 225-258. ISBN 978-953-307-156-5

Sulaiman, Hamzah Asyrani and Bade, Abdullah (2011) Balanced hierarchical method of collision detection in virtual environment. In: Software Engineering and Computer Systems, Part III. Springer, 2011, pp. 493-501. ISBN 3642222021, 9783642222023

Wahjono, Sentot Imam (2011) Bisnis Modern. In: Bisnis Modern. Graha Ilmu, Yogyakarta, Indonesia, pp. 273-296. ISBN 9789797566661

Wickramasinghe, N. S. and Bali, Rajeev K. and Goldberg, S and Troshani, I and Abd Ghani, Mohd Khanapi (2011) Pervasive Health and KM: A wireless knowledge based approach for facilitating superior chronic disease management in Abd Ghani M.K, ed. (2011)The analysis and design of a Pervasive Health Record: perspectives from Malaysia. In: Pervasive Health and KM: A wireless knowledge based approach for facilitating superior chronic disease management. Springer, USA. (In Press)

Conference or Workshop Item

A. P., Puvanasvaran and M. R. , Muhamad (2011) Principles and Business Improvement Initiatives of Lean Relates to Environmental Management System. In: IEEE Int'l Technology Management Conference.

Ab Ghani, Mohd Ruddin and Mohd Amin, Nur Huda and Hyriel Anuar, Kasdirin (2011) MODELING AND SIMULATION FOR INVERTED PENDULUM ON ROTATING DISC. In: 2011 International Confrence on Energy and Electrical Systems (ICEES 2011), 2011/8/12, Kuala Lumpur.

Ab Ghani, Mohd Ruddin and Safei, Su'aidi (2011) KELAYAKAN DALAM KEPIMPINAN. In: PERASMIAN PERSATUAN WARISAN BUGIS SEMALAYSIA, 2011/11/05, MELAKA.

Abd Ghani, M. K. and G. Noma, N (2011) Seamless Access to cancer patient’s EMR through Short Message Service and 2D Barcode. In: Malaysian Technical Universities International Conference (MUiCET2011), 13-15 Nov 2011, Batu Pahat, Johor.

Abd Ghani, M. K. and Lee, C. W. (2011) The Design of Flexible Pervasive Electronic Health Record (PEHR). In: IEEE Colloquium on Humanities, Science and Engineering Research (CHUSER2011), 5 -6 December 2011, Penang, Malaysia.

Abd Manap, Nurulfajar and Soraghan, John J. (2011) Novel view synthesis based on depth map layers representation. In: 2011 3DTV Conference: The True Vision - Capture, Transmission and Display of 3D Video (3DTV-CON).

Abd.Rahim, Y and Sahib, S and Abd Ghani, M. K. (2011) Pseudonmization Techniques for Clinical Data: Privacy Study in Sultan Ismail Hospital Johor Bahru. In: International Conference on Mechanical Engineering and Materials Science (ICMEMS 2011) , September 24-25, 2011, Cheju Island, Korea..

Abd.Rahim, Y and Sahib, S. and Abd Ghani, M. K. and Yaacob, A.H (2011) A Hybrid Method For K-Anonymization Using Clustering Technique. In: International Conference on Aerospace Engineering and Information Technology (AEIT 2011), May 5-6, 2011, Beijing China.

Abdollah, Mohd Fadzli bin and Yamaguchi, Y. and Akao, T. and Inayoshi, N. and Miyamoto , N. and Tokoroyama, Takayuki and Umehara, Noritsugu (2011) Deformation and wear map of DLC coating under cyclic impacts. In: International Tribology Conference 2011, 30 October 2011 - 3 November 2011, Hiroshima.

Abdollah, M. F. and Mas’ud, M. Z. and Sahib, S. and Yaacub, A. H. and Yusof, R. and Selamat, S. R. (2011) Host Based Detection Approach using Time Based Module for Fast Attack Detection Behavior. In: 2011 First IRAST International Conference on Data Engineering and Internet Technology, 15-17 March 2011, Bali Dynasty Resort, Bali, Indonesia.

Abdul Hamid, Afifah Maheran and Mohd Said, Muzalifah and Mohammed Napiah, Zul Atfyi Fauzan and Haron, Nor Zaidi (2011) Structural and Morphology of Zinc Sulphide Thin Films on Various Temperature. In: 2011 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2011), September 28-30, 2011, Kota Kinabalu, Sabah, Malaysia.

Abdul Majid, Izaidin and Ngadiman, Yunos and Hussin, Burairah (2011) A STUDY OF HUMAN SKILL ACHIEVEMENT IN MALAYSIAN PUBLIC UNIVERSITIES: KNOWLEDGE, SKILL AND ATTITUDE. In: International Conference on Management (ICM 2011) , 13-14 June 2011, Hydro Hotel, Penang.

Abdul Majid, Izaidin and Ngadiman , Yunos and Hussin, B. (2011) Exploring Overall Equipment Efficiency Model of Laboratory Capital Equipments in Malaysian Public Universities. In: International Conference on Industrial Engineering and Operations Management, 22-24 Jan 2011, Kuala Lumpur, Malaysia.

Abdul Munir, Fudhail and Mat Nuri @ Md Din, Nur Rashid and Mohd Azmi, Mohd Irwan and Salim, Mohd Azli and Hasnan, Mohd Yazid (2011) Preliminary Studies of Air flow around Vehicle Front Windscreen. In: THE 4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), 3 - 4 OKTOBER 2011, MELAKA, MALAYSIA.

Abdul Rahman, Azrul Azwan and Bilge, Pinar and Seliger, Günther (2011) Simulation Aided Development of Alternatives for Improved Maintenance Network. In: 7th International Conference on Digital Enterprise Technology, 28-30 September 2011, Athens, Greece.

Abdul Rahman, Azrul Azwan and Seliger, Günther (2011) Simulation as a tool in Self Adaptive Control for Flexible Assembly Systems. In: The 44th CIRP Conference on Manufacturing Systems, 31.5.2011 - 3.6.2011, Madison, Wisconsin, USA.

Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing and Sulong, Muhammad Suhaizan (2011) Methodology and Factors Consideration for Effective Building Web-based Business Applications. In: 17th International Business Information Management Conference, 14-15 November 2011, Milan, Italy.

Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing and Sulong, Muhammad Suhaizan and Wongsim, Manirath (2011) Key Challenges of Development Process of Building Web-based Business Application. In: 11th International Conference on Electronic Business (ICEB), 29 November - 1 December 2011, Bangkok, Thailand.

Abdul-Latip, S. F. and Reyhanitabar, M. R. and Susilo, W. and Seberry, J. (2011) Extended cubes: enhancing the cube attack by extracting low-degree non-linear equations. In: Proceedings of the 6th ACM Symposium on Information, Computer and Communications Security.

Abdullah, Abdul Rahim and Mohd Said, Nurul Ain and Sha'ameri, Ahmad Zuri and Ali, Fara Ashikin (2011) Power Quality Analysis Using Frequency Domain Smooth - Windowed Wigner - Ville Distribution. In: 2nd IEEE International Conference on Signal and Image Processing Applications, ICSIPA 2011 , 16-18 November 2011, Kuala Lumpur. (Submitted)

Abdullah, Abdul Rahim and Mohd Said, Nurul Ain and Sha’ameri, Ahmad Zuri and Ali, Fara Ashikin (2011) Power quality analysis using frequency domain smooth-windowed Wigner-Ville distribution. In: IEEE International Conference on Signal and Image Processing Applications (ICSIPA), 2011, 16-18 Nov. 2011, Kuala Lumpur.

Abdullah, Rohana and Mohamad, Nor Akramin and Abdul Rahman, Mohd Soufhwee (2011) Design and Development of Material Requirement Planning (MRP)Tool for an Electronic Product Manufacturer. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Abu, Maisarah and A. Rahim, Mohamad Kamal and Ayop, Osman and Zubir, Farid (2011) Design of Triple-band Dipole-type Antenna with Dual-band Artificial Magnetic Conductor Structure. In: 2011 IEEE 5th European Conference on Antenna and Propagation , 11-15 April 2011, Rome, Italy.

Abu, Maisarah and A. Rahim, Mohamad Kamal and Suaidi, Mohd. Kadim and Mohd. Ibrahim, Imran and Md Nor, Norazura (2011) The Performance Comparison of Printed Dipole Antenna with Two Different Structures of AMC Ground Plane. In: 2011 International IEEE Radio Frequency and Microwave Conference, 12-14 December 2011, Seremban, Malaysia.

Abu, Maisarah and Rahim, M. K. A. and Suaidi, Mohamad Kadim and Mohd Ibrahim, Imran and Md Nor, Norazura (2011) The Performance Comparison Of Printed Dipole Antenna With Two Different Structures Of Amc Ground Plane. In: 4th IEEE International RF and Microwave Conference, RFM 2011 , 12-14 December 2011, Seremban. (Submitted)

Abu, N. A. and Sahib, S. (2011) Random ambience using high fidelity images. In: 3rd International Conference on Digital Image Processing (ICDIP 2011), 15-17 April 2011, Chengdu, China.

Abu Bakar, Kamarudin and Rajiani, Ismi and Ayob, Md Razali and Nasri, Noor Shawal (2011) Fostering Green Strategy Through "A-F-F-I-R-M" Model For Sustainable Development Within The Environmental - Socio - Economic System In Malaysia. In: International Conference on Management (ICM 2011) Proceeding , 13-14 June 2011, Hydro Hotel, Pulau Pinang. (Submitted)

Ahmad, Ibrahim and Jaafar, Azizah (2011) Games design and integration with user’s emotion. In: International Conference on User Science and Engineering (i-USEr), 2011, Subang Jaya.

Ahmad, Mohd Riduan and Rashid, Mushidi and Abdul Aziz, Muhammad Hafiz and Mohd Esa, Mona Riza and Cooray, Vernon and Rahman, Mahbubur and Dutkiewicz, Eryk (2011) Analysis of lightning-induced transient in 2.4 GHz wireless communication system. In: IEEE International Conference on Space Science and Communication (IconSpace), 12-13 July 2011, Penang, Malaysia.

Ahmad, R. (2011) EVALUATION MODEL FOR SECURITY COMPONENTS: A CASE STUDY ON MALAYSIAN INTERNET BANKING. In: Proceedings of the 3rd International Conference on Computing and Informatics, ICOCI , 8-9 June, 2011 , Bandung, Indonesia.

Ahmad, S. and Muda, N. A. (2011) AN EXPERIMENTAL DESIGN TO EXERCISE NEGOTIATION IN REQUIREMENTS ENGINEERING. In: 2nd International Conference on Software Engineering and Computer Systems (ICSECS2011), 27-29 June 2011, UMP, Pahang.

Ahmad, S. and Muda, N. A. and Muda, A. K. and A. Jalil, I.E. (2011) THE EFFECTIVENESS OF SIMULATION EDUCATION FOR UNDERGRADUATE STUDENTS IN SOFTWARE ENGINEERING AREA. In: 3rd International Conference on Education and New Learning Technologies, 4th-6th July 2011, Barcelona (Spain).

Ahmad, S. and Muda, N. A. and Muda, A. K. and Othman, Z. (2011) An Approach to Estimate the Savings from Negotiation based on Cost-Benefit Analysis Model. In: The 5th Malaysian Software Engineering Conference, 13-14 December 2011, The Puteri Pacific Johor Bahru.

Ahmad , Arfah and Ahmad, Suziana and Hashim, Mohd Ruzaini and Kasdirin, Hyreil Anuar (2011) The Evaluation Of Peo Attainment Based On Alumni And Employer Survey. In: 1st National Conference on Active Learning (NCAL 2011), 10-11 December 2011, Kampus Bandar Universiti Teknikal Malaysia, Melaka.

Akbar, F. and Herman, N. S. and Hussin, B. (2011) Effect of spectral/spatial transformation on remote sensing image for NDVI-based drought detection analysis. In: International Conference on Graphic and Image Processing (ICGIP 2011), 1 October 2011, Cairo, Egypt .

Ali, Fara Ashikin and Abdullah, Abdul Rahim and Mohd Said, Nurul Ain and Abu Hassan, Mohd Fareezie (2011) Design and Development of Mobile Security Robot. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Alias , Khamis and Zulasyraf , Mohd Badarudin and Azhar , Ahmad and Azhan, Ab. Rahman and Norazhar , Abu Bakar (2011) Development of mini scale compressed air energy storage system. In: Clean Energy And Technology The 8th Sustainable Energy And Environment (SEE) Forum Meeting, 27-29 June 2011, The Legend Hotel, Kuala Lumpur. (Submitted)

Alimin, Ahmad Jais and Tamaldin, Noreffendy and Mamat, Rizalman (2011) Strategic Research Partnership on Automotive Powertrain & Fuels in Universiti Malaysia Pahang, Universiti Teknikal Malaysia Melaka & Universiti Tun Hussein Onn Malaysia. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Ananta, Gede Pramudya (2011) Using An Adaptive Learning Environment For Conceptual And Procedural Knowledge Development. In: 1st National Conference on Active Learning (NCAL 2011), 10-11 December 2011, Kampus Bandar UTeM .

Anuar , Mohamed Kassim (2011) Design and Development of MY 2nd EYE for Visually Impaired Person. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA2011), September 25-28, 2011, Langkawi, Malaysia.

Anuar , Mohamed Kassim and Miskon, Muhammad Fahmi (2011) Effectiveness of Central Pattern Generator Model on Developed One Legged Hopping Robot. In: 2011 IEEE Student Conference on Research and Development, 19-20 Dec 2011, Cyberjaya, Selangor.

Anuar , Mohamed Kassim and Mohammad Fahmi , Miskon and Nurul Hafizah, Abd Rahim and Takashi , Yasuno (2011) Effectiveness of Reference Height Control system for Tripod Hopping Robot. In: 2011 4th International Conference on Mechatronics (ICOM),, 17-19 May 2011, Kuala Lumpur, Malaysia.

Anuar , Mohamed Kassim and Mohammad Fahmi , Miskon and Nurul Hafizah, Abd Rahim and Takashi , Yasuno (2011) Moving Motion Control System On Developed Tripod Hopping Robot. In: International Conference on Electrical, Control and Computer Engineering (InECCE 2011), 21- 22 June 2011, Pahang.

Arshad, Nurul Hidayah and Arep @ Ariff, Hambali and Samsudin, Abdul Rahim and Minhat, Mohamad (2011) Application of Integrated Kano’s Method and Quality Deployment Function in New Product Development Process. In: International Conference on Advanced Manufacturing 2011 , May 23 – 24, 2011, TATi University College, , Terengganu.

Ashari, Muhamad Hafizullah and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir and Mohd Adrinata, Shaharuzaman (2011) DESIGN OF A SPACE FRAME CHASSIS FOR UTEM PERODUA ECO-CHALLENGE CAR. In: International Seminar on the Application of Science & Mathematics 2011 (ISASM 2011), 1-3 November 2012, PWTC Kuala Lumpur.

Asmai, Siti Azirah and Abd. Samad, Hasan Basari and Shibghatullah, Abdul Samad and Ibrahim and Hussin, B. (2011) Neural network prognostics Model for Industrial Equipment Maintenance. In: 11th International Conference on Hybrid Intelligent Systems (HIS), 5 - 8 December 2011 , Melaka, Malaysia.

Asmai, Siti Azirah and Abdullah, Rosmiza Wahida and Hasan Basari, Abd Samad and Hussin, Burairah (2011) Application of multi-step time series prediction for industrial equipment prognostic. In: 2011 IEEE Conference on Open Systems, 25-28 Sept 2011, Langkawi, Malaysia.

Asmai, Siti Azirah and Abdullah, Rosmiza Wahida and Che Soh, Mohd Norhisham and Hasan Basari, Abd Samad and Hussin, Burairah (2011) Application Of Multi- Step Time Series Prediction For Industrial Equipment Prognostic. In: IEEE Conference On Open System (ICOS2011), 25-28 September 2011, Langkawi, Kedah.

Asmai, Siti Azirah and Abdullah, Rosmiza Wahida and Hasan Basari, Abd Samad and Shibghatullah, Abdul Samad and Hussin, Burairah (2011) Condition-based prognostic tool for industrial equipment maintenance. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Asmai, Siti Azirah and Hasan Basari, Abd Samad and Shibghatullah, Abdul Samad and Ibrahim, Nuzulha Khilwani and Hussin, Burairah (2011) Neural network prognostics model for industrial equipment maintenance. In: 11th International Conference on Hybrid Intelligent Systems, HIS 2011 , 5-8 December 2011, Melaka. (Submitted)

Asyadi Azam, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Aluminum Oxide Support Layer for Vertical Growth of Single Walled Carbon Nanotube using Alcohol Catalytic CVD Technique. In: The Fifth International Conference on Advanced Materials and Nanotechnology (AMN-5), 5-13 February 2011, Wellington Convention Centre, Wellington, New Zealand.

Asyadi Azan, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Directly grown vertically aligned single-walled CNTs on conducting substrate as electrode material for electrochemical capacitor. In: 219th Electrochemical Society Meeting, 1-8 May 2011, The Montreal Convention Center (Palais des Congrès de Montréal), Montreal, Quebec, Canada.

Ayob, Md Razali and Mat, Shafizal and Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2011) Study on Performance of Single Cylinder Engine Fueled by LPG. In: International Conference on Mechanical, Automotive, and Aerospace Engineering 2011, 17 - 19 May 2011, Kuala Lumpur.

Aziz , Yahya and Safiah , Sidek and Zanariah , Jano (2011) Critical Thinking Skills among Final Year Students of Malaysian Technical Universities. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 Novermber 2011, Johor, Malaysia..

Azman, Farah Nadia and Dolhalit, Mohamad Lutfi and Salam, Sazilah (2011) Basic Quran recitation multimedia application for Malay-speaking readers based on meaningful learning approach: Analysis and design. In: 1st National Conference on Active Learning - NCAL 2011 , 10 December 2011, Melaka, Malaysia .

Azmi, Mohd Sanusi and Muda, A. K. (2011) Arabic Calligraphy Classification using Triangle Model for Digital Jawi Paleography Analysis. In: Intrenational Conference on Hybrid Intelligent Systems 2011, 5 - 8 Dec, 2011, Melaka, Malaysia.

Azmi, Mohd Sanusi and Muda, A. K. (2011) Digital Paleography: Using the Digital Representation of Jawi Manuscripts to Support Paleographic Analysis. In: IEEE - 2011 International Conference on Pattern Analysis and Intelligent Robotics, 28-29 June 2011, Putrajaya, Malaysia.

Bahar, Mohd Bazli and Md Sani, Zamani (2011) Development of rubber tire gantry crane (prototype) obstacles avoidance method using a single sensor on microcontroller based. In: IEEE Symposium On Industrial Electronics and Applications (ISIEA2011) , 25-28 September 2011, Langkawi, Kedah. (Submitted)

Bakar, Norasiken and Shahbodin, Faaizah and Hasan, Hazmilah and Salam, Sazilah and Mad Lani, Shahdan (2011) Design and Implementation of 3D approach for Courseware Electromagnetic Theory Subject. In: 1st National Conference on Active Learning - NCAL 2011 , 10 December 2011, Melaka, Malaysia .

Basari, Amat Amir and Esro, Mazran and Abdul Manap, Redzuan (2011) Half car suspension system using fuzzy logic controller. In: International Conference on Robotic Automation System (ICORAS 2011), 23 Mei ~ 24 Mei 2011, TATIUC, Terengganu.

Bayasut, Bilal Luqman and Pramudya Ananta, Gede and Muda, A. K. (2011) Intelligent biometric detection system for disabled people. In: 11th International Conference on Hybrid Intelligent Systems, 5-8 December 2011, Melaka. (Submitted)

Burairah, Hussin and Abd Samad, Hasan Basari and Abdul Samad , Shibghatullah and Siti Azirah, Asmai (2011) Exam timetabling using graph colouring approach. In: IEEE Conference On Open System ( ICOS2011 ), 25-28 September 2011, Langkawi, Kedah. (Submitted)

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Bakar, Norasiken (2011) Implementing PBL In Human Computer Interaction Class. In: 1st National Conference on Active Learning (NCAL 2011), 10-11 December 2011, Kampus Bandar UTeM.

Che Soh, Mohd Norhisham and Bugis, Ismadi and Jamaludin, Irma Wani and Ranom, Rahifa (2011) Thermal analysis on PCB using Galerkin approach. In: 4th International Conference On Modeling, Simulation & Applied Optimization (ICMSAO 2011) , 19-21 April 2011, Impiana KLCC Hotel and Spa, Kuala Lumpur.

Cheng, See Yuan and Tsubokura, Makoto and Nakashima, Takuji and Okada, Yoshihiro and Nouzawa, Takahide (2011) Large Eddy Simulation Of Flow Past Road Vehicles Subjected To Pitching Oscillation. In: 20th AIAA Computational Fluid Dynamics Conference, 27-30 Jun 2011, Hawaii, USA.

Cheng, See Yuan and Tsubokura, Makoto and Nakashima, Takuji and Okada T. and Nouzawa, Takahide (2011) Numerical Analysis Of The Effects Of Transient Aerodynamics On Driving Stability. In: The Sixth Japan-Taiwan Workshop On Mechanical And Aerospace Engineering, 7-10, Dec 2011, Sapporo, Japan.

Cheok, Yong Seng and Zulkifilie, Ibrahim (2011) Vector Controlled Drives Of Permanent Magnet Synchronous Motor Using Pi Speed Controller For Long Cable Application. In: Research And Development (SCOReD), 2012 IEEE Student Conference On, 5-6 Dec 2012, Pulau Pinang .

Chong, Shin Horng and Sato, Kaiji (2011) Practical and robust control for precision positioning systems. In: 2011 IEEE International Conference on Mechatronics (ICM), April 2011, Istanbul.

Daud, Mohd Elias and Yusof, Yusri and Minhat, Mohamad (2011) A framework for a development of an intelligent CNC controller based ON step-NC. In: International Conference on Manufacturing Science and Technology ICMST 2011, 16 - 18 September 2011, Singapore.

Daud, Mohd Elias and Yusof, Yusri and Minhat, Mohamad (2011) A review of intelligent CNC controller development based on step-NC. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Din, Abdul Talib and Yaakob, Mohd Yuhazri and Othman, Mohd Yazid (2011) Harvesting energy from flood mitigation ponds using water wheel. In: International Conference and Exhibition on Sustainable Energy and Advanced Materials, 3 and 4 October 2011, Universitas Sebelas Maret, Surakarta, Indonesia.

Din, Abdul Talib and Mohd Zaidi, Zairul Fazura (2011) The study on the soil heat transfer characteristics for the development of a cost-saving underground air cooling system. In: The 5th PSU-UNS International Conference on Engineering and Technology (ICET-2011), 2 , 3 May 2011, Phuket, Thailand.

Ernawan, Ferda and Abu, Nur Azman and Herman, Nanna Suryana (2011) Spectrum analysis of speech recognition via discrete Tchebichef transform. In: International Conference on Graphic and Image Processing 2011.

Fajar, A. and Herman, N. S. and Abu, N. A. and Sahib, S. (2011) Hierarchical Approach in Clustering to Euclidean Traveling Salesman Problem. In: International Conference on Advanced Research on Electronic Commerce, Web Application and Communication (ECWAC 2011), 16-17 April 2011, Guangzhou.

Fudhail Abdul Munir, F.A. Munir and Mohd Adrinata, Shaharuzaman and Muhammad Zahir , Hassan and Mohd Rody , Mohamad Zin and Mohd Irwan, Mohd Azmi and Nur Rashid , Mat Nuri (2011) Components Design of a Single Seat Educational Race Vehicle. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Gan, Chin Kim (2011) INVESTIGATION OF THE IMPACT OF ELECTRIFYING TRANSPORT AND HEAT SECTORS ON THE UK DISTRIBUTION NETWORKS. In: 21st International Conference on Electricity Distribution, 6-9 June 2011, Frankfurt.

Gannapathy, Vigneswara Rao and Suaidi, Mohamad Kadim and Johal, Muhammad Syahrir and Lim, Kim Chuan (2011) A Smooth Forwarding Operation in Wireless Mesh Network. In: 2011 IEEE 10th Malaysia International Conference on Communications (MICC), MICC 2011, 2 - 5 October 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia.

Gede Pramudya, A. and Muda, A. K. (2011) Intelligent Biometric Detection System for Disabled People. In: International Conference on Hybrid Intelligent Systems 2011, 5 - 8 Dec, 2011, Melaka, Malaysia.

Hamzah, Rostam Affendi and Hamid, Mohd Saad and Rosly, Hasrul Nisyam and Hashim, Nik MohdZarifie (2011) A Distance and Pixel Intensity Relation for Disparity Mapping in Region of Interest. In: 2011 IEEE International Conference on Information and Education Technology (ICIET 2011), 26-28 January 2011, Guiyang, China.

Hamzah, Rostam Affendi and Rosly, Hasrul Nisyam and Hamid, Mohd Saad (2011) An Obstacle Detection and Avoidance of A Mobile Robot with Stereo Vision Camera. In: 2011 International Conference on Electronic Devices, Systems and Applications (ICEDSA), 25-27 April 2011, Kuala Lumpur.

Hamzah, Rostam Affendi and Hamid, Mohd Saad and Rosly, Hasrul 'Nisham and Hashim, Nik Mohd Zarifie (2011) An Analysis Of Multiple Size Region Of Interest In Disparity Mapping For Stereo Vision Application. In: 2011 IEEE Symposium On Computer & Informations (ISCI 2011) , 20-22 March 2011, Kuala Lumpur.

Hamzah, Rostam Affendi and Hamid, Mohd Saad and Rosly, Hasrul Nisyam (2011) An Analysis of Multiple Size Region of Interest in Disparity Mapping for Stereo Vision Application. In: 2011 IEEE Symposium on Computers & Informatics, 20-22 March 2011, Kuala Lumpur.

Hamzah, Rostam Affendi and Salleh, Azahari and A Aziz, Khairul Azha and Mohammed Napiah, Zul Atfyi Fauzan (2011) A Pixel Matching Process And Multiples Roi For Stereo Images In Stereo Vision Application. In: IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, 1-3 April 2011, Bali, Indonesia. (Submitted)

Hanipah , Hussin (2011) Pedagogical framework on active learning in ordinary classroom. In: (1st National Conference on Active Learning (NCAL 2011) , 10-11 December 2011, Kampus Bandar UTeM. (Submitted)

Haron, Nor Zaidi and Hamdioui, Said (2011) On Defect Oriented Testing for Hybrid CMOS/memristor Memory. In: Asian Test Symposium 2011, 20-23 November 2011, New Delhi.

Haron, Nor Zaidi and Hamdioui, Said (2011) Cost-Efficient Fault-Tolerant Decoder for Hybrid Nanoelectronic Memories. In: Design, Automation & Test in Europe Conference , 14-18 March 2011, Grenoble, France.

Haron, Nor Zaidi and Hamdioui, Said (2011) On Defect Oriented Testing for Hybrid CMOS/memristor Memory. In: 2011 Asian Test Symposium, 20-23 November 2011, New Delhi, India.

Haron, Nor Zaidi and Hamdioui, Said (2011) Cost-Efficient Fault-Tolerant Decoder for Hybrid Nanoelectronic Memories. In: Design, Automation & Test in Europe Conference @ Exhibition, 14-18 March 2011, Grenoble, France.

Haroon, Hazura and Hanim, Abdul Razak and Bidin, Mardiana and Shaari, Sahbudin and Menon, P.Sushita (2011) Free carrier absorption loss of p-i-n Silicon-On-Insulator (SOl) phase modulator. In: ENABLING SCIENCE AND NANOTECHNOLOGY. INTERNATIONAL CONFERENCE. 2010., 1-3 Disember 2010, Kuala Lumpur.

Harun, Mohamad Haniff and Sulaiman , Marizan and Hairol Nizam , Mohd Shah (2011) Shape-Based Matching: Application of Defect Detection. In: Proceesings of Malaysian Technical Universities International Conference on Engineering and Technology (MUICeT 2011), 13-15 November 2011, Batu Pahat, Johor.

Harun, Mohamad Haniff and Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2011) Shape-Based Matching: Application of Edge Detection using Harris Point. In: Proceedings of International Conference on Robotic Automation System (ICORAS 2011), 23-24 May 2011, Kemaman, Terengganu.

Hasan, Hazmilah and Bakar, Norasiken and Shahbodin, Faaizah and Hussain, Kalthom (2011) Inculcating ethics through action learning. In: 1st National Conference on Active Learning - NCAL 2011 , 10 December 2011, Melaka, Malaysia .

Hasan Basari, Abd Samad and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2011) A markovian approach to determine optimal means for SME production process. In: Malaysian Technical Universities International Conference on Engineering and Technology (MUiCET 2011), 14 - 15 November, 2011, UTHM, Batu Pahat, Johor.

Hasan Basari, Abd Samad and Hussin, Burairah and Shibghatullah, Abdul Samad and Jiun, Yau Wen (2011) Embedding mobile agent technology into real time vibration sensor for condition-based maintenance. In: International Conference on Computer and Netwok Engineering, June 17-19 2011, Zhengzhou, China.

Hasan Basari, Abd Samad and Hussin, Burairah and Shibghatullah, Abdul Samad and Wen Jiun, Yau (2011) Embedding mobile agent technology into real time vibration sensor for condition-based maintenance. In: 2011 International Conference on Computer and Network Engineering (ICCNE 2011) , 17-19 June 2011, Zhengzhau, China. (Submitted)

Hasan Basari, Abd Samad and Mohamad Jaya, ‪Abdul Syukor and Mohd Hashim, Siti Zaiton and Muhamad, Mohd Razali and Md Nizam, Abd Rahman and Habibollah, Haron (2011) Application of ANFIS in predicting TiAlN coatings flank wear. In: UNSPECIFIED.

Hasan Basari, Abd Samad and Razali, Hazlina and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2011) The integration of simple Markov model in solving single line production system. In: 7th International Conference on Information Technology in Asia (CITA 2011) , 12-14 Julai 2011, Kuching, Sarawak. (Submitted)

Hasan Basari, Abd Samad and Razali, Hazlina and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2011) The integration of simple Markov model in solving single line production system. In: International Conference on IT in Asia, 12-14 July 2011, Hilton Hotel, Kuching, Sarawak.

Hashim, Norlezah and Idris, Fakrulradzi and Abu Talib, Noraini (2011) A Study Of Technology Acceptance Model (Tam) Towards Continuous Professional Development (Cpd). In: International Conference on Lifelong Learning 2011 (ICLLL2011) , 14-15 November 2011, Seri Pacific Hotel, Kuala Lumpur . (Submitted)

Hasim, Norhaslinda and Md Basar, Mohd Farriz and Mohd Aras, Mohd Shahrieel (2011) Design and Development of a Water Bath Control System : A Virtual Laboratory Environment. In: IEEE SCOReD 2011, 19-20 December 2011, Cyberjaya, Selangor.

Hassan, Rosilah and Ab Rahaman, Muhammad Syahrin and Wan Mohd Ghazali, Khadijah and Md. Ali, Zulkarnain and Lim, Fang Fang (2011) Enhancing Student Mark Management Through Web Based System. In: International Conference on Engineering Education ICEE 2011.

Ho, Yih Hwa and Yap, David Fook Wen (2011) Stochastic Model Considering Individual Satellite Signal Quality on GPS Positioning. In: IEEE International Conference on Computer Applications and Industrial Electronics (ICCAIE), 2011, 4-7 Dec. 2011.

Hussain, Kalthom and Shahbodin, Faaizah and Bakar, Norasiken and Hasan, Hazmilah (2011) Comparing Students’ Perceptions of Blended Learning and Traditional Classroom Deliveries in an English Professional Communication Course in a Technical University. In: 1st National Conference on Active Learning - NCAL 2011 , 10 December 2011, Melaka, Malaysia .

Hussin, Burairah and Hasan Basari, Abd Samad and Shibghatullah, Abdul Samad and Asmai, Siti Azirah and Othman, Norwahida Syazwani (2011) Exam timetabling using graph colouring approach. In: 2011 IEEE Conference on Open Systems, 25-28 Sept 2011, Langkawi, Malaysia.

Ibrahim, Abu Bakar and Othman, Abdul Rani and Husain, Mohd Nor and Johal, Mohamad Syahrir (2011) Design and Simulation Low Noise Amplifier at 5.8GHz for WIMAX Applications. In: 2011 International Conference on Information Communication and Management(ICICM 2011) , 14 - 16 October 2011, Singapore.

Ibrahim , A.B and Othman, A.R and Husain , M.N and Johal, M.S (2011) Simulation of Single Stage Cascode Low Noise Amplifier at 5.8GHz Using T-Matching Network. In: ICMSAO 2011 - INTERNATIONAL CONFERENCE ON MODELING, SIMULATION AND APPLIED OPTIMIZATION 2011(ICMSAO) 4th International Conference, 19-21 April 2011, Kuala Lumpur.

Ibrahim , A.B and Othman , A.R and Husain, M.N and Johal , M.S (2011) High Gain of Cascode LNA at 5.8GHz Using T-Matching Network for wireless Applications. In: ICWOC 2011 : 2011 International Conference on Wireless and Optical Communications (ICWOC 2011), May 2, 2011 - May 4, 2011, Chongqing.

Ibrahim , A.B and Othman , A.R and Hussain , M.N and Johal , M.S (2011) Low Noise Amplifier at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for Wireless Applications. In: ICCDE 2011 - 2011 International Conference on Computer Design and Engineering (ICCDE 2011), 12- 16 August 2011, Kuala Lumpur.

Imran , Mohd Ibrahim and Mohd Nor , Husain and Azizah , Shaaban and Sian Meng, Se (2011) The Effect of the Carbon to the S11 Measurement on the Pyramidal Microwave Absorbers. In: 2011 IEEE Symposium on Wireless Technology and Applications (ISWTA), September 25-28, 2011, Langkawi, Malaysia , 25-28 September 2011, Langkawi, Malaysia.

Imran , Mohd Ibrahim and Tharek, Abdul Rahman (2011) A Study on Effectiveness of FR4 as a Dielectric Material for Radial Line Slot Array Antenna for Wireless Backhaul Application. In: 2011 17th Asia-Pacific Conference on Communications (APCC) 2nd – 5th October 2011, Sutera Harbour Resort, Kota Kinabalu, Sabah, Malaysia, 2-5 October 2011, Kota Kinabalu, Malaysia.

Isa, Halim (2011) Analysis of Time-to-Fatigue for Standing Jobs in Metal Stamping Industry. In: 2011 International Conference on Manufacturing and Industrial Engineering (ICMIE2011), 22 - 24 February 2011, Haikou, China..

Isa, Halim (2011) Correlation between Psychological Fatigue and Muscle Fatigue associated with Prolonged Standing. In: Asia Pacific Symposium on Advancement in Ergonomics and Safety, 5 - 6 December 2011, Kangar, Perlis..

Isa, Halim (2011) The Effect of Safety Shoe Insole Material on Subjects due to Prolonged Standing. In: Asia Pasific Symposium on Advancement in Ergonomics and Safety, 5 - 6 December 2011, Kangar, Perlis..

Isa, Halim (2011) Prolonged Standing Strain Index (PSSI): A Proposed Method to Quantify Risk Level of Standing Jobs in Industrial Workplaces. In: 2011 International Conference on Manufacturing and Industrial Engineering (ICMIE2011), 22 - 24 February 2011, Haikou, China..

Ishak, Norshahidatul Hasana and Bakar, Norasiken and Md Lani, Shahdan and Salam, Sazilah and Shahbodin, Faaizah (2011) A conceptual framework for the design of a 3D courseware on electromagnetic theory. In: 1st National Conference on Active Learning, 10-11 December 2011, Melaka, Malaysia. (Submitted)

Ishak, Norshahidatul Hasana and Bakar, Norasiken and Shahdan, Md Lani and Salam, Sazilah and Shahbodin, Faaizah (2011) Design and development of 3D approach for electromagnetic theory courseware. In: ADHE 2011, 2-4 November 2011, MAEPS, UPM Serdang. (Submitted)

Jabar, Juhaini (2011) Strategic technology alliances, technology transfer and the performance of Malaysian manufacturers. In: Technical Universities International Conference on Engineering and Technology: Globalising Innovation for Sustainable Transformation , 13 Nov - 15 nov, Batu Pahat, Johor, Malaysia.

Jabar, Juhaini and Soosay, Claudine (2011) Evaluating technology transfer and the performance of manufacturing SMEs. In: Proceedings of the 25th Australia and New Zealand Academy of Management Conference: The Future of Work and Organisations, 7 Dec - 9 Dec, Wellington, New Zealand.

Jabar, Juhaini and Soosay, Claudine (2011) An evaluation of learning and innovation through strategic technology alliances in Malaysian manufacturers. In: Proceedings of the 10th International Research Conference on Quality Innovation and Knowledge Innovation, 15 Feb - 18 Feb, Kuala Lumpur, Malaysia.

Jaya, A. S. M and Muhamad, M.R. and Rahman, M.N.A. and Napiah, Z.A.F.M. and Hashim, S. Z. M. and Haron, H. (2011) Hybrid RSM-fuzzy modeling for hardness prediction of TiAlN coatings. In: 2011 11th International Conference on Intelligent Systems Design and Applications, 22-24 Nov 2011, Cordoba, Spain.

Jidin, Auzani (2011) FPGA based high precision torque and flux estimator of direct torque control drives. In: IEEE Applied Power Electronics Colloquium (IAPEC), 2011, 18-19 April 2011, Johor Bahru.

Kalthom, Husain and Aida Nasirah, Abdullah and Norasiken, Bakar and Faaizah, Shahbodin and Norshaidatul Hasana, Ishak and Hazmilah, Hasan (2011) Comparing student's perceptions of blended learning and traditional classroom deliveries in an english professional communication course in a technical university. In: 1st National Conference on Active Learning (NCAL 2011), 10-11 December 2011, UTeM, Melaka, Malaysia. (Submitted)

Kamal Baharin, S. S. (2011) Spatial-Science-based approach in Planning Framework for Multimodal Public Transport: Case Study of Melaka, Malaysia. In: 10th International Symposium & Exibition on Geoinformation 2011 (ISG2011) and ISPRS 2011, 27-29 September 2011, Shah Alam Convention Centre, Selangor, Malaysia.

Kanchymalay, K and Arif, F. and Hashim, U. R. and Amirrudin, S. (2011) ERP Implementation Assessment in the Manufacturing Industries. In: 2nd Annual Conference on Software Engineering and Application 2011, 12-13 December 2011, Singapore 2011.

Kasmuri, Emaliana and Woods, Peter (2011) Positioning Coverage Mismatch In Ontology Integration For Owl-Based Ontology. In: 11th International Conference on Hybrid Intelligent Systems, HIS 2011 , 5-8 December 2011, Malacca. (Submitted)

Khalid, Mohamad Kamal and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir and Tamaldin, Noreffendy (2011) A STUDY ON BRAKING PERFORMANCE OF UTEM ECO-CAR DISC BRAKE SYSTEM. In: International Seminar on the Application of Science & Mathematics 2011 (ISASM 2011), 1-3 November 2012, PWTC Kuala Lumpur.

Khamis, Alias and Mohd Nasir, Mohamad Na'im (2011) Design and Simulation of Small Scale Microgrid Testbed. In: 2011 Third International Conference onComputational Intelligence, Modelling and Simulation (CIMSiM), 20-22 September 2011, Pulau Langkawi, Malaysia.

Kok, Swee Leong and Ab Rahman, Mohd Fauzi and Yap, David F. W. and Ho, Yih Hwa (2011) Bandwidth Widening Strategies for Piezoelectric Based Energy Harvesting from Ambient Vibration Sources. In: International Conference on Computer Applications and Industrial Electronics (ICCAIE 2011), 4 - 7 Dec 2011, Penang.

Kok, Swee Leong and Mohamad, Norizan and Yap, David Fook Weng and Chen, Soo Kien and Dee, Chang Fu (2011) Multi-frequency energy harvesting using thick-film piezoelectric cantilever. In: International Conference On Electrical, Control And Computer Engineering (InECCE 2011), 21- 22 June 2011, Pahang.

Liew, Zhen Yee and Poong, Yew Siang and Tay, Choo Chuan (2011) Developing an Intelligent Exercise Reminder System Infused with Sense of Community. In: 3rd International Conference on Advanced Management Science 2011, 4-6 November 2011, Kuala Lumpur, Malaysia.

Linda , Khoo Mei Sui and Maor, Dorit and Schibeci, Renato (2011) The Engineering Eportfolio: Enhancing Communication, Critical Thinking and Problem Solving and Teamwork Skills? In: WASET 2011 International Conference, 24-26 June 2011, Paris, France.

Low , Yin Fen (2011) Assessment of Cortical Inhibition in Adult Attention-Deficit/Hyperactivity Disorder by Paired-Chirp Auditory Evoked Potentials. In: 5th International IEEE/EMBS Conference on Neural Engineering, 27 April -1 May 2011, Cancun, Mexico.

Low , Yin Fen (2011) A Performance Study of the Wavelet-Phase Stability in the Quantification of Neural Correlates of Auditory Selective Attention. In: The 5th International IEEE EMBS Conference on Neural Engineering, April 27 - May 1, 2011, Cancun, Mexico.

Luqman Bayasut, Bilal and Pramudya Ananta, Gede and Kamilah Muda, Azah (2011) Intelligent Biometric Detection System for Disabled People. In: HIS, 8 December 2011, Melaka, Malaysia. (Submitted)

M., Zulkiflee and Asmai, S. A. and Nahar, H. and Ayop, Zakiah and Sahib, S. (2011) Behavioral Analysis on IPv4 Malware on different platforms in IPv6 Network Environment. In: 2011 IEEE Conference on Open Systems (ICOS2011), 25-28 September 2011, Langkawi.

M.SUBRAMANIAM , INDRA DEVI and MOHD RAUS , TEH ZANARIAH (2011) A Course On English For Professional Communication For Engineering Undergraduates In A Technical University In Malaysia: A Needs Survey. In: Enhancing Learning: Teaching & Learning International Conference 2011, 24-26 November 2011, ParkCity Everly Hotel Miri. (Submitted)

Makina, T. and Salam , S. (2011) User Interface and Interaction Design Considerations for Collaborative Learning Using Augmented Reality Learning Object. In: Second International Conference on Software Engineering and Computer Systems (ICSECS 2011), 27-29 June 2011, Kuantan, Pahang, Malaysia.

Mardiana, Bidin and Hazura, Haroon and Hanim, Abdul Razak and zulatfyi, F. Mohamed Hanapiah (2011) Impact of Coupled Resonator Geometry on Silicon-on Insulator Wavelength Filter Characteristics. In: 2011 IEEE RSM, 28-30 September 2011, Kota Kinabalu.

Mas'ud, Mohd Zaki and M. A, Faizal and Y., Asrul Hadi and N.M., Ahmad and Hamid , Erman (2011) Virtual Machine Based Autonomous Web Server. In: First IRAST International Conference on Data Engineering and Internet Technology (DEIT) , -, -. (Submitted)

Masjuri , Musa and Juhari, Ab. Razak and Md Razali , Ayob and Mohd Afzanizam, Mohd Rosli and Safarudin Gazali , Herawan and Kamaruzzaman, Sopian (2011) CFD anallysis on cost effective pico hydro turbine: A case study for low head and low flow rate condition. In: International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE SEAM 2011), 3-4 October , 2011., Solo, Indonesia.. (Submitted)

Masjuri , Musa and Juhari, Ab. Razak and Md. Razali , Ayob and Mohd Afzanizam, Mohd Rosli and Safaruddin Gazali , Herawan and Kamaruzzaman, Sopian (2011) Development of model system for cost-effective pico hydro turbine. In: 3rd International Symposium & Exhibition In Sustainable Energy & Environment (ISESEE) 2011, 1-3 June 2011, Avillion Legacy Hotel, Melaka. (Submitted)

Mas’ud, M. Z. and Abdollah, M. F. and Yaacub, A. H. and Ahmad, N. M. and Abdul Hamid, E. (2011) Virtual Machine based Autonomous Web Server. In: 2011 First IRAST International Conference on Data Engineering and Internet Technology, 15-17 March 2011, Bali Dynasty Resort, Bali, Indonesia .

Mat Lazi, Jurifa and Ibrahim, Zulkifilie and Sulaiman , Marizan and Jamaludin, Irma Wani and Yusuf Lada, Musa (2011) Performance Comparison Of Svpwm And Hysteresis Current Control For Dual Motor Drives. In: IEEE Applied Power Electronics Colloquium (IAPEC 2011), 19-21 April 2011, Impiana KLCC Hotel and Spa, Kuala Lumpur. (Submitted)

Md Ghazaly, Mariam (2011) Basic Characteristics and Positioning of Multilayer Electrostatic Actuator Supported by Only Lubrication Oil. In: 2011 JSPE Autumn Meeting (2011) , September 2011, Japan.

Md Ghazaly, Mariam (2011) Evaluation of a Multilayer Electrostatic Actuator for a Fine Motion Stage without Precise Balls for Lubrication. In: The 6th International Conference on Micromanufacturing (ICOMM2011), 7 - 10 March 2011, Tokyo, Japan.

Md Khambari, M. N. and Muhamad Noh, Z. A. and Mat Ariff, N. A. and Mas'ud, M. Z. (2011) Performance Enhancements in IEEE 802.11 DCF MANET through Variation of SIFS Values in Distance Vector Routing Environment. In: 7th International Conference on IT in Asia 2011, 12-14 Jul 2011, Kuching, Sarawak.

Md Khambari, Mohd Najwan and Muhamad Noh, Zul Azri and Mat Ariff, Nor Azman and Mas'ud, Mohd Zaki (2011) Performance Enhancements In IEEE 802.11 DCF Manet Through Variation Of SIFS Values In Distance Vector Routing Environment. In: 2011 7th International Conference on Information Technology in Asia: Emerging Convergences and Singularity of Forms, CITA'11, , 12-14 July 2011, Kuching, Sarawak,. (Submitted)

Md Nawawi, Mohamad Riduwan and Chong, Shin Horng and Hashim, Mohd. Ruzaini and Hanafi, Ainain Nur (2011) Development of Output Feedback Sliding Mode Control for Nonlinear System With Disturbance. In: 2011 IEEE International Conference on Control System, Computing and Engineering, 25 November 2011, Holiday Inn Penang.

Md Saat, Mohd Shakir (2011) Nonlinear H∞ static output feedback controller design for polynomial systems: An iterative sums of squares approach. In: 6th IEEE Conference on Industrial Electronics and Applications (ICIEA), 2011 , 21 -23 June 2011, Beijing, China.

Md Saat, Mohd Shakir (2011) A Nonlinear Static Output Controller Design for Polynomial Systems: An Iterative Sums of Squares Approach. In: 2011 4th International Conference on Mechatronics (ICOM),, 17-19 May 2011, Kuala Lumpur, Malaysia.

Md Saat, Mohd Shakir (2011) Nonlinear robust H∞ static output feedback controller design for parameter dependent polynomial systems: An iterative sum of squares approach. In: 50th IEEE Conference on Decision and Control and European Control Conference (CDC-ECC), 2011 , December 12-15, 2011, Orlando, Florida US.

Md Saat, Mohd Shakir (2011) Nonlinear static output feedback controller design for uncertain polynomial systems: An iterative sums of squares approach. In: 6th IEEE Conference on Industrial Electronics and Applications (ICIEA), 2011 , 21 -23 June 2011, Beijing, China.

Md Sani, Zamani (2011) Development of Rubber Tire Gantry Crane (Prototype) Obstacles Avoidance Method Using a Single Sensor on Microcontroller Based. In: IEEE Symposium on Industrial Electronics and Applications 2011, 25-28 September 2011, Langkawi.

Minhat, Mohamad (2011) An Assessment on Graphite Milling Characteristics. In: International Conference and Exhibition on Sustainable Energy andAdvanced Materials (ICE SEAM 2011), October 3-4, 2011, Solo-Indonesia.

Miskon, Muhammad Fahmi and Md Sani, Zamani and Jamaluddin, Mohd Herman (2011) Linear and Rotary Infrared Scan System for Measuring Circumference. In: MUiCET 2011, 2011, Batu Pahat, Johor.

Mohamad Isa, Mohd Sa'ari (2011) Antenna Control Using EBG. In: Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP), 11-15 April 2011, Rome, Italy.

Mohamad Jaya, Abdul Syukor and Hasan Basari, Abd Samad and Abd Rahman, Md Nizam and Mohammad, Mohd Razali and Mohd Hashim, Siti Zaiton and Haron, Habibollah (2011) Application of fuzzy rule-based model in predicting flank wear of TiAlN coatings in PVD magnetron sputtering process. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Mohamad Juoi, Jariah and Mohd Rosli, Zulkifli and Chang, Siang Yee and Shamsuri, Siti Rahmah and Rahim, T.A (2011) Implementation Of Cooperative Problem–Based Learning In Achieving Learning Outcomes. In: 1st National Conference on Active Learning (NCAL 2011) , 10-11 December 2011, Kampus Bandar UTeM.

Mohamad Riduwan, Md Nawawi and Chong, Shin Horng and Hashim, Mohd Ruzaini and Hanafi, Ainain Nur (2011) Development of output feedback sliding mode control for nonlinear system with disturbance. In: IEEE International Conference on Control System, Computing and Engineering (ICCSCE 2011), 25-27 November 2011, Holiday Inn, Batu Ferringhi, Penang.

Mohamad Shukri , Zakaria (2011) Numerical Investigation of 2D Lid Driven Cavity using Smoothed Particle Hydrodynamics (SPH) Method. In: The 4th International Meeting of Advances in Thermofluids, 3 - 4 oct 2011, Melaka.

Mohamed Aminuddin, Mai Mariam and Mustaffa, Izadora (2011) A Hybrid Trial To Trial Wavelet Coherence and Novelty Detection Scheme for a Fast and Clear Notification of the Uncomfortable Loudness Level. In: 2011 International Conference on Biomedical Engineering and Technology, 4 - 5 June 2011, Selangor, Malaysia.

Mohammad, Janatul Islah and Johari, Norhasnira and Said, Md. Radzai and Mohd. Nor, Mohd. Jailani (2011) Experimental results on sound absorption coefficients of Malaysian woods. In: International Conference on Noise 2011, 4-7 Sept 2011, Osaka Japan.

Mohammad Ali Arsyad, Mohd Shuhaimi and Irda , Roslan and Zaheera, Zainal Abidin and Mohd Zaki, Mas'ud and Syarulnaziah, Anawar (2011) The new services in nagios network bandwidth utility email notification and sms alert in improving the network performance. In: 7th International Conference on Information Assurance and Security (IAS), 2011 , 5 - 8 December 2011, Melaka. (Submitted)

Mohammed Napiah, Zul Atfyi Fauzan and Idris, Muhammad Idzdihar and Mohd Said, Muzalifah and Abdul Hamid, Afifah Maheran and Ali, Nur Alisa and Hamzah, Rostam Affendi (2011) Process and Characterization of Strained Silicon MOSFET Incorporating Dielectric Pocket (SDP-MOSFET). In: 2011 IEEE Regional Symposium on Micro and Nano Electronics (RSM 2011), September 28-30, 2011, Kota Kinabalu, Malaysia.

Mohd Amin, Nur Huda and Kasdirin, Hyreil Anuar and Md Nawawi, Mohamad Riduwan and Ab Ghani, Mohd Ruddin (2011) Development of PI Controller for Disc Speed. In: IEEE Symposium on Industrial Electronics and Applications 2011, 25-28 September 2011, Langkawi.

Mohd Amin, Nur Huda and Kasdirin, Hyreil Anuar and Md Nawawi, M. Riduwan and Ab Ghani, Mohd Ruddin (2011) Development of PI Controller for Disc Speed. In: Industrial Electronics and Applications (ISIEA), 2011 IEEE Symposium on, 2011/9/25, Langkawi, Malaysia.

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Ali, Fara Ashikin and Syed Abdul Hamid , Syed Mohamad Shazali and Md Basar, Mohd Farriz (2011) Performances Evaluation And Comparison Of Two Algorithms For Fuzzy Logic Rice Cooking System (MATLAB Fuzzy Logic Toolbox And Fuzzy Tech). In: 2011 IEEE Conference On Open Systems (ICOS2011), , 25-28 September 2011, Langkawi, Kedah.

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Fara Ashikin , Ali and Arfah Syahida, Mohd Nor and Lim , Wee Teck (2011) Underwater Technology Research Group (UTeRG) Glider for Monitoring and Surveillances Applications. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Fara Ashikin , Ali and Syed Mohamad Shazali, Syed Abdul Hamid and Mohd Farriz , Md Basar (2011) Performances Evaluation and Comparison of Two Algorithms for Fuzzy Logic Rice Cooking System (MATLAB Fuzzy Logic Toolbox and FuzzyTECH). In: 2011 IEEE Conference on Open Systems, 25-28 Sept 2011, Langkawi, Malaysia.

Mohd Aris, Nor Azlan and Din, Jafri and Lam, Hong Yin (2011) Rain height information from TRMM precipitation radar for satellite communication in Malaysia. In: 2011 IEEE International Conference on Space Science and Communication (IconSpace), 12-13 July 2011, Penang, Malaysia.

Mohd Azmi, Mohd Irwan and Yeoh, Chit Chuan and Mat Tokit, Ernie and Razali, Nadlene and Abdul Munir, Fudhail and Nordin, Mohd Nur Azmi and Mat Nuri @ Md Din, Nur Rashid (2011) The effect of contact angle on triangular shape interrupted microchannel heat sinks performance. In: THE 4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), 3 - 4 OKTOBER 2011, MELAKA.

Mohd Fairuz , Abdollah and Syed Najib , Syed Salim and Irma Wani , Jamaludin and Muhammad Nizam , Kamarudin (2011) Development of an automatics parallel parking system for nonholonomic mobile robot. In: International Conference on Electrical, Control and Computer Engineering 2011 (lnECCE 2011), 21-22 June 2011, Hyatt Regency, Kuantan, Pahang. (Submitted)

Mohd Foozy, F and Ahmad, R. and Abdollah, M. F. and Yusof, R. and Mas'ud, M. Z. (2011) Generic Taxonomy of Social Engineering Attack. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Mohd Hatta, Nuraziera and Bakar, Norasiken (2011) 3D Design of chemistry subject at UTeM : Atom cubic. In: 1st National Conference on Active Learning - NCAL 2011 , 10 - 11 December 2011, Melaka, Malaysia .

Mohd Irwan, Mohd Azmi and Nazri, Md Daud and Fudhail, Abdul munir and Suhaimi , Misha (2011) Mesoscale Simulation of Natural Convection in Square Cavity Driven by Discrete Two Source-Sink Pairs On One Sidewall. In: 2011 International Conference On Computer & Communication Devices (ICCCD 2011), 1 April - 3 April 2011, Bali, Indonesia.

Mohd Kamil, Mohd Hafiz Faizal and Jaafar, Azizah and Ahmad, I. (2011) Usability an complement of perception on design elements for product label. In: Visual Infromatics International Seminar 2012 (VIIS'12), 12- 13 December 2012, UKM, Bangi, Selangor.

Mohd Khairir, Ismail and Md Radzai , Said and Mohd Firdaus, Zakaria (2011) The specific energy absorption of local wood subjected to quasi-static loading. In: International Conference on Application and Design in Mechanical Engineering 2012, ICADME2012, 27-25 Feb 2012, Pulau Pinang.

Mohd Najib , Ali Mokhtar and Fairul Azni , Jafar (2011) Finite Element Analysis of Plate Structure Excited by Patches of Piezoelectric Actuators. In: PROCEEDINGS OF MALAYSIAN TECHNICAL UNIVERSITIES INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY, 13-15 November 2011, Katerina Hotel Batu Pahat, Johor.

Mohd Nazrin , Muhammad and Nurdiana, Nordin (2011) 3D hand posture recognition using multicam. In: 2011 IEEE International Conference on Signal and Image Processing Applications {ICSIPA 2011), 16-18 November 2011, Hotel Maya, Kuala Lumpur. (Submitted)

Mohd Nurul Al-Hafiz , Sha' abani and Muhammad Fahmi , Miskon (2011) The effect of anomaly detection accurancy in varying the angular resolution of sonar using repetitive observation strategy. In: 2011 IEEE Symposium on Industrial Electronics and Applications (ISIEA), 25-28 Sept. 2011, Langkawi, Kedah. (Submitted)

Mohd Razali, Muhamad and Mohammad Hamdan, Mohd Sanusi (2011) The effect woven fabric styles and honeycomb core properties composite parts: a review. In: Advanced Processes & System in Manufacturing (APSIM2011), 14-15 December 2011, , Kuala Lumpur. (Submitted)

Mohd Rusdy , Yaacob and Nik Anwar, Nik Syahrim (2011) Effect of Reflective Objects of Different Colors to the Output Voltage-Distance Characteristics of Sharp GP2D120 IR Sensor. In: MUiCET 2011, 2011, Batu Pahat, Johor.

Mohd Saat, Fatimah Al Zahrah and Zhibin, Yu and Jaworski, Artur (2011) CFD-assisted regenerator analysis: application to thermoacoustic system. In: The 23rd IIR International Congress of Refrigeration, 21-26 August 2011, Prague, Czech Republic.

Mohd Sanusi, Azmi and Azah Kamilah, Muda (2011) Arabic Calligraphy Classification using Triangle Model for Digital Jawi Paleography Analysis. In: 2011 11th International Conference on Hybrid Intelligent Systems (HIS), 5-8 Dec 2011, Melaka, Malaysia.

Mohd Sanusi, Azmi and Azah Kamilah, Muda (2011) Digital Paleography: Using the Digital Representation of Jawi Manuscripts to Support Paleographic Analysis. In: 2011 International Conference on Pattern Analysis and Intelligent Robotics, 28-29 June 2011, Putrajaya, Malaysia.

Mohd Sanusi, Azmi and Khadijah, Wan Mohd Ghazali (2011) Arabic Calligraphy Identification for Digital Jawi Paleography using Triangle Blocks. In: 2011 International Conference on Electrical Engineering and Informatics, 17-19 July 2011, Bandung, Indonesia.

Mohd Sanusi, Azmi and Omar, Khairuddin and Mohammad Faidzul , Nasrudin and Wan Mohd Ghazali, Khadijah and Abdullah, Azizi (2011) Arabic Calligraphy Identification for Digital Jawi Paleography using Triangle Blocks. In: 2011 International Conference on Electrical Engineering and Informatics, July 17-19, 2011, Institut Teknologi Bandung, Bandung, Indonesia.

Mohd Shuhaimi, Mohammad Ali Arsyad and Zainal Abidin, Zaheera and Roslan, Irda and Anawar, Syarulnaziah (2011) The new services in nagios: network bandwidth utility, email notification and sms alert in improving the network performance. In: International Conference on Information Assurance and Security, 5-8 Dec 2011, Malaysia.

Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Mansor, Muhd Ridzuan and Hassan, Muhammad Zahir and Mohd Adrinata, Shaharuzaman (2011) Implementation of Cooperative Learning in Engineering Education: A Case Study on the UTeM Perodua Eco-Challenge Project. In: 2011 1st National Conference on Active Learning - NCAL 2011, 10-11 December 2011, Kampus Bandar, Universiti Teknikal Malaysia Melaka.

Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Mansor, Muhd Ridzuan and Hassan, Muhammad Zahir and Shaharuzaman, Mohd Adrinata (2011) Implementation Of Cooperative Learning In Engineering Education : A Case Study On The Utem Perodua Eco - Challenge Project. In: the 1st National Conference on Active Learning (NCAL 2011) , 10-11 December 2011, Kampus Bandar UTeM. (Submitted)

Muda, A. K. and Yun-Huoy, C. and Muda, N. A. (2011) PSO and Computationally Inexpensive Sequential Forward Floating Selection in Acquiring Significant Features for Handwritten Authorship. In: International Conference on Hybrid Intelligent Systems 2011, 5 - 8 Dec, 2011, Melaka, Malaysia.

Muda, A. K. and Pratama, S. F. and Yun-Huoy, C. and Muda, N. A. (2011) Selecting Significant Features for Authorship Invarianceness in Writer Identification. In: Springer - Software Engineering and Computer Systems ICSECS 2011, 27 - 29 June, 2011, Pahang, Malaysia.

Muda, A. K. and Yun-Huoy, C. and Ahmad, S. (2011) A Comparative Study of Feature Extraction Using PCA and LDA for Face Recognition. In: International Conference on Information Assurance and Security 2011, 5 - 8 Dec, 2011, UTeM, Melaka, Malaysia.

Muda, N. A. and Ahmad, S. and Muda, A. K. (2011) Recognizing Patterns of Music Signals to Songs Classification Using Modified AIS-Based Classifier. In: Springer - Software Engineering and Computer Systems ICSECS 2011, 27 - 29 June, 2011, Pahang, Malaysia.

Muhamad Noh, Z. A. and Md Khambari, M. N. and Mat Ariff, N. A. and Roslan, I. (2011) Retransmission-Based Additional TXOP Allocation for Audio-Video Transmission by IEEE 802.11e HCCA. In: 7th International Conference on IT in Asia 2011.

Musa , Yusuf Lada and Othman , Mohinda and Aziah, Khamis and Jurifa , Mat Lazi and Irma Wani , Jamaludin (2011) Simulation single phase shunt active filter based on P-Q technique using matlab simulink development tools environment. In: 2011 IEEE Applied Power Electronics Colloquium (IAPEC), 18-19 April 2011, Johor Bahru . (Submitted)

Narayanan Samy , Ganthan and Ahmad , Rabiah and Ismail , Zuraini (2011) Health Information Security Guidelines for Healthcare Information Systems. In: Symposium Health Information Management Research , September 2011, Zurich Swisszerland.

Ngadiman, M. Y. and Hussin, B. and Abdul Majid, I. (2011) A STUDY OF HUMAN SKILL ACHIEVEMENT IN MALAYSIAN PUBLIC UNIVERSITIES: KNOWLEDGE, SKILL AND ATTITUDE. In: INTERNATIONAL CONFERENCE ON MANAGEMENT (ICM 2011) , 13-14 June 2011, Hydro Hotel, Penang, Malaysia.

Nik Anwar, Nik Syahrim and Mohd Rusdy , Yaacob and Md Sani, Zamani (2011) Simulation of spline based NC- manufacturing of plastic optical components. In: MUiCET 2011, 2011, Batu Pahat, Johor.

Noor Azlin, Bidin and Mustaffa, Normah (2011) Blogosphere : How Youth Perceived Blogs Credibility. In: International Conference on Media and Communication (MENTION 2011) , 11-12 October 2011, Equatorial Hotel, Bangi. (Submitted)

Noor Azlin, Bidin and Normah , Mustaffa (2011) Blogosphere: How Youth Perceived Blogs Credibility. In: International Conference on Media and Communication MENTION 2011, 11 - 12 October 2011, Equatorial Hotel, Bangi.

Noor Azwan, Shairi and Imran, Mohd Ibrahim (2011) Third Order Intermodulation Distortion Effect on The Constellation Error in RF Transmitter of IEEE 802.11a WLAN System. In: Industrial Electronics and Applications (ISIEA), 2011 IEEE Symposium on, 25 -28 Sept 2011, Langkawi, Malaysia.

Norasiken, Bakar and Nuraziera, Mohd Hatta (2011) 3D design of chemistry at UTeM atom cubic. In: 3D design of chemistry at UTeM Atom cubic, 10 & 11 December 2011, City Campus.

Norazlina , Ahmad and Marizan, Sulaiman and Muhamad Khairi, Aripin (2011) Quality inspection of engraved image using based matching approach. In: 2011 4th International Conference on Mechatronics (ICOM), 17-19 May 2011, Kuala Lumpur, Malaysia. (Submitted)

Nordin, Nurdiana binti and Muhammad, Mohd Nazrin bin (2011) An Investigation of Color Based Marker Recognition for 3D Instrument Localization in Surgical Application. In: IEEE Symposium on Industrial Electronics and Applications 2011, Langkawi.

Nur Huda , Mohd Amin and Hyreil Anuar, Kasdirin and Mohamad Riduwan , Md Nawawi and Mohd Ruddin, Ab Ghani (2011) Development of PI controller for disc speed. In: IEEE Symposium On Industrial Electronics and Applications (ISIEA2011), 25-28 September 2011, Langkawi, Kedah. (Submitted)

Nur Rashid, Mat Nuri @ Md Din and Ir. Dr. Shuhaimi, Mansor (2011) Simulation of Air Flow on Modified Generic Shape of an Automotive Side View Mirror. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Omar, Mohamed K and Murugan, Sharmeeni and Abdullah, Rohana (2011) The impact of Tolerance Limit on Cost of Quality. In: IEEE Industrial Engineering and Enginering Management, 6-9 Dec 2011, Furama RiverFront Hotel.

Ong, Chee Tiong and Loi, Wei Sen and Choy, Yaan Yee and Tay, Kim Gaik (2011) Tsunami & Forced Korteweg de Vries Equation. In: Simposium Kebangsaan Sains Matematik ke 19, 9-11 November 2012, UiTM Pulau Pinang.

Osman, Mashanum and Chung, Paul W.H. (2011) Language learning using texting and wiki: a Malaysian context. In: 2011 e-CASE & e-Tech International Conference , January 18-20, 2011, Toshi Center Hotel, Tokyo, Japan 1888.

Othman, A. (2011) DISABILITY LEARNING TOOL: BRUSHING-TEETH USING MUSIC FOR AUTISM. In: 3rd International Conference on Education and New Learning Technologies, 4th-6th July 2011, Barcelona (Spain).

Patakor, Fizatul Aini and Sulaiman , Marizan and Ibrahim, Zulkifilie (2011) Adaptive Sliding Mode For Indirect Field Oriented Controlled Of Induction Motor. In: IEEE Student Conference on Research and Development (SCORED 2011) , 19-20 November 2011, Putrajaya, Selangor. (Submitted)

Perumal, Puvanasvaran A. (2011) A Framework To Develop Tools & Techniques Requirements Methodology For Implementing Lean Manufacturing. In: Proceeding of The Seminar on Science & Its Application in Industry, 2006, Selangor.

Phuman Singh, A.S. (2011) Enhancement of SUV Roll Dynamics using Fuzzy Logic Control. In: 2011 First International Conference on Informatics and Computational Intelligence, 12-14 December 2011, Bandung, Indonesia.

Pramudya Ananta, Gede (2011) Using an Adaptive Learning Environment for Conceptual and Procedural Knowledge Development. In: NCAL, 10 December 2011, Melaka, Malaysia. (Submitted)

Pratiwi, Lustiana and Choo, Yun Huoy and Draman @ Muda, Azah Kamilah (2011) A Framework of Rough Reducts Optimization Based on PSO/ACO Hybridized Algorithms. In: 3rd Conference on Data Mining and Optimization (DMO), 28-29 June 2011, Selangor, Malaysia.

Pratiwi, Lustiana and Choo, Yun Huoy and Draman @ Muda, Azah Kamilah and Draman @ Muda, Noor Azilah (2011) Improving Ant Swarm Optimization With Embedded Vaccination For Optimum Reducts Generation. In: 11th International Conference on Hybrid Intelligent Systems 2011 (HIS 2011) , 5-8 December 2011, Melaka.

Putra, Azma (2011) Application of Micro-perforated Panel (MPP) in a Vehicle Vabin: Overcoming the ‘Mass-Air-Mass’ Resonance. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Determination of Vibration Strength of a Small Structure-Borne Source Using a High Mobility Reception Plate. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Dried Paddy Straw Fibers as an Acoustic Absorber: A Preliminary Study. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Employing the micro-perforated panel in the vehicle cabin: Is this possible? In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Putra, Azma (2011) Experimental Investigation on the Effect of Liquid Fill Level in a Container to Liquid Sloshing. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Putra, Azma (2011) Investigation on Natural Waste Fibers from Dried Paddy Straw as a Sustainable Acoustic Absorber. In: 2011 IEEE First Conference on Clean and Technology CET, 27-29 June, Kuala Lumpur, Malaysia.

Putra, Azma (2011) On a Simple Technique to Measure the Airborne Noise in a Motor Vehicle using Source Substitution. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2011) Sound transmission loss of a double-leaf solid-microperforated partition under normal incidence of acoustic loading. In: INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE EGINEERIN 2011 (ICMAAE '11), 17 May 2011, Kuala Lumpur.

Rahim, S. S. and Sazli, N. S. W. and Alias, S. S. and Mat Rani, M. I. (2011) The Study on 3D Simulation Usage in Teaching and Learning Process. In: 1st National Conference on Active Learning - NCAL 2011 , 10 December 2011, Melaka, Malaysia .

Ramli, Mohd zulkifli and Salam, Zainal (2011) A retrofit circuit to increase output power of PV system during partial shading condition. In: Innovative Smart Grid Technologies - Middle East (ISGT Middle East), 2011 IEEE PES Conference , Dec 2011, Jeddah.

Ranjit Singh, Sarban Singh and Loo , S.E. and Zulkifli, Shariff (2011) EMD Electricty monitoring device for user awareness. In: 2nd International Conference on Intelligent Systems, Modelling and Simulation, 24-28 January 2011, Kuala Lumpur & Phnom Penh, Cambodia. (Submitted)

S.THIRU,, CHITRAMBALAM and S.HEMA,, VATHI and AHMAD, RIVAI and PANDEY, SUNIL (2011) A Comparison Study on Relationship Between Welding Current and Penetration for Plasma Enhanced Shielded Metal Arc Welding(PESMAW). In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, Batu Pahat, Malaysia.

SAID, MD RADZAI and Tahir, A.S (2011) THEORETICAL ANALYSIS OF QUASI-STATIC COMPRESSION OF HEXAGONAL RING. In: The 5th PSU-UNS International Conference on Engineering and Technology, 2-3 May 2011, Phuket.

Sabrina, Ahmad and Noor Azilah, Draman @ Muda and Azah Kamilah, Draman @ Muda and Zahriah, Othman (2011) An approach to estimate the saving from negotiation based on cost- benefit anaylsis model. In: The 5th Malaysian Software Engineering Conference (MYSEC 2011), 13-14 December 2011, The Puteri Pacific, Johor. (Submitted)

Safei, Su'aidi (2011) Democracy Experience of Malaysia. In: Democracy Experience of Countries, 6 July 2011, Faculty of Economy, Cairo University. (Submitted)

Safei, Su'aidi (2011) Mahasiswa Menangani Cabaran Pendidikan Semasa. In: Seminar Isu Semasa dan Cabarannya dalam Kalangan Umat Islam, 22 October 2011, Abbasiah Malaysia Hall, Cairo. (Submitted)

Safei, Su'aidi (2011) Pendekatan Terbaru EME. In: Buletin EME (Education Malaysia Egypt), July 2011, Embassy of Malaysia, Cairo.

Safei, Su'aidi (2011) Qualification in Leadership (Kelayakan dalam Kepimpinan). In: NGO Officiating Ceremony, 5 November 2011, Melaka.

Sahul Hameed, Sahara and Salam, S. and Bakar, Norasiken (2011) Bringing Mobile Pedagogical Agent To Support Virtual Cooperative Learning. In: the Conference on Academic Development in Higher Education (ADHE2011) , 2-4 November 2011, MAEPS, Serdang, Selangor. (Submitted)

Saifudin, W. S. N. and Salam, S. and Abdullah, M. H. L. (2011) Converting E-Learning Into M-Learning Application Using MMCD. In: ADHE 2011, 2-4 November 2011, MAEPS, UPM Serdang.

Saifudin, W. S. N. and Salam, S. and Lim, A. M. H. (2011) MMCD Framework and Methodology for Developing m-Learning Applications. In: ICTLHE 2011, 22-24 November 2011, Equtorial Hotel, Melaka. (Submitted)

Saipullah, Khairul Muzzammil (2011) Continuous Local Histogram Descriptor For Diagnosis of Bronchiolitis Obliterans. In: IEEE Hybrid Intelligence System 2011 (HIS2011), 5-8 December 2011, Ayer keroh, Melaka.

Saipullah, Khairul Muzzammil (2011) Spectral dimensionality reduction based on intergrated bispectrum phase for hyperspectral image analysis. In: Image and Signal Processing for Remote Sensing XVII, Monday 19 September 2011, Prague, Czech Republic.

Sakidin, Hamzah and Tay, Choo Chuan (2011) Transformation of Neill Mapping Function For GPS Tropospheric Delay. In: 2011 Malaysian Technical Universities International Conference on Engineering and Technology, 13-15 November 2011, Katerina Hotel Batu Pahat, Johor.

Salleh, Mohd Shukor and Minhat, Mohamad and Che Zainal Abidin, Nik Mohd Farid and Arep @ Ariff, Hambali (2011) System Framework Tools For Future CNC Machining. In: 2nd International Conference On Mechanical And Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Selamat, S. R. and Yusof, R. and Sahib, S. and Abdollah, M. F. and Hassan, N. H. and Zainal Abidin, Z. (2011) Traceability in Digital Forensic Investigation Process. In: ICOS 2011, IEEE CONFERENCE ON OPEN SYSTEMS, 25-28/9/2011, Langkawi Malaysia.

Selamat, S. R. and Yusof, R. and Sahib, S. and Hassan, N. H. and Abdollah, M. F. and Zaheera, Zainal Abidin (2011) Tracebility in Digital Forensic Investigation Process. In: IEEE Conference on Open Systems (ICOS2011), 25-28 September 2011, Langkawi.

Selamat, S. R. and Yusof, R. and Sahib, S. and Roslan, I. and Abdollah, M. F. and Mas'ud, M. Z. (2011) Adapting Traceability in Digital Forensic Investigation Process. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Shaarani, Ahmad Shaarizan (2011) Perception of Social Behavioural and Visual Realism of Virtual Character using Wii- based Tracking Device. In: MUiCET 2011, 2011, Batu Pahat, Johor. (Submitted)

Shahbodin, F. (2011) THE IMPACT OF ICT IN PROBLEM BASED LEARNING. In: 1st National Conference on Active Learning, 11 December 2011, Melaka.

Shahbodin, F. and zareena, rosli (2011) Preliminary Analysis Of Using Game in Problem Based Learning in Learning Mathematic. In: International Conference CELMA 2011, UK.

Shahbodin, Faaizah and Che Ku Mohd, Che Ku Nuraini (2011) The Impacts Of PBL On Student’s Performances. In: International Conference on Teaching & Learning in Higher Education 2011, 21-23 Nov 2011, Melaka.

Shahbodin, Faaizah and Che Ku Mohd, Che Ku Nuraini and Bakar, Norasiken and Husain, Kalthom and Hasan, Hazmilah (2011) Implementing PBL In Human Computer Interaction Class. In: 1st National Conference On Active Learning, 10-11 December 2011, Melaka, Malaysia.

Shahbodin, Faaizah and Yusoff, Mariana and Che Ku Mohd, Che Ku Nuraini (2011) ICT + PBL = Holistic Learning Solution: UTeM’s Experience. In: Sixth International Conference On Digital Information Management (ICDIM 2011), 26-28 Sept 2011, Melbourne Australia.

Shahrulanuar , Mohamed and AB. Aziz , Mohd Zin and Fakrul Adabi , Abdul Kadir (2011) Pembangunan etika dan moral dalam kursus kursus yang ditawarkan di Universiti Teknikal Malaysia Melaka. In: Seminar Islam Nusantara : Pemikiran dan Cabaran Masa Kini, 25-27 Oktober 2011, Langkawi, Kedah. (Submitted)

Shairi, Noor Azwan and Ahmad, Badrul Hisham and A.C.Z., Khang (2011) Design and Analysis of Broadband High Isolation of Discrete Packaged PIN Diode SPDT Switch for Wireless Data Communication. In: Universiti Teknikal Malaysia Melaka, 12-14 December 2011, Seremban, Negeri Sembilan.

Shairi, Noor Azwan and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Osman, Anuar Faidz (2011) SPDT Switch with Defected Ground Structure for Time Division Duplex Switching in Wireless Data Communication System. In: 2011 IEEE INTERNATIONAL RF AND MICROWAVE CONFERENCE, 12-14 December 2011, Seremban Negeri Sembilan.

Siti Noormiza , Mat Isa and Zulkifilie, Ibrahim and Jurifa , Mat Lazi (2011) Comparative analysis of simplified and standard fuzzy logic controller in vector controller PMSM. In: IEEE Symposium On Industrial Electronics and Applications, 25-28 September 2011, Langkawi, Kedah. (Submitted)

Siti Nor Habibah, Hassan and Mahanum , Mohd Zamberi and Siti Nurhaida, Khalil and Nortazi , Sanusi and Faizil , Wasbari and Anita Akmar, Kamarolzaman (2011) Company preception on the employability skills of industrial traning students. In: International Conference on Teaching and Learning in Higher Education (ICTLHE 2011), 21-23 November 2011,, Hotel Equatorial, Melaka. (Submitted)

Siti Normi , Zabri @ Suhaimi and Aziata Husna, Awing and Lizawati , Salahuddin and Muzalifah, Mohd Said (2011) Application development with J2ME for mobile phone. In: Th 13th International Conference On Advanced Communication Technology, 13-16 February 2011, Phoenix Park, Korea. (Submitted)

Sivakumar, Dhar Malingam (2011) An Investigation of Forming Analysis of Fibre-Metal Laminates through Experimental and Finite Element Analysis. In: Nineteenth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) Conference., Jan. 14, 2011 - Jan 17, 2011, Auckland, New Zealand.

Suhaimi, Misha and Md Daud, Nazri and Wasbari, Faizil and Herawan, Safarudin Gazali (2011) The Design and Development of Oven Using Dissipative Heat from Refrigerator. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 (ICMAAE 2011) , 17 - 19 May 2011, Kuala Lumpur.

Sulaiman, Mohd Nor Irman and Choo, Yun Huoy and Chong, Kuan Eng (2011) Ant Colony Optimization With Look Forward Ant In Solving Assembly Line Balancing Problem. In: 3rd Conference On Data Mining And Optimization (DMO), 28-29 June 2011, Selangor, Malaysia.

Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2011) Shape-Based Macthing: Application of efect Detection. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2011) Shape-Based Matching: Application of Defect Detection. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2011) Shape-Based Matching: Application of Edge Detection Using Harris Point. In: International Conference on Robotic Automation System (ICORAS 2011), 23-24 Mei 2011, Terenganu.

Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing and Abdul-Aziz, Azlianor (2011) Information Quality Activities within the Industry Initiative of Service-Oriented Architecture Implementation. In: 16th International Conference on Information Quality (ICIQ), 18-20 Nov 2011, Adelaide, Australia.

Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing and Abdul-Aziz, Azlianor (2011) Towards Enabling Service-Oriented Architecture Implementation Initiative. In: 17th International Business Information Management Conference, 14-15 Nov 2011, Milan, Italy.

Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing and Abdul-Aziz, Azlianor and Wongsim, Manirath (2011) Driving the Business Service-Oriented Architecture Enabled Initiative. In: 11th International Conference on Electronic Business (ICEB), 29 November - 1 December 2011, Bangkok, Thailand.

Syed Abdul Hamid , Syed Mohamad Shazali and Mohd Aras, Mohd Shahrieel and Ali, Fara Ashikin and Anuar , Mohamed Kassim and Abdul Azis, Fadilah (2011) Development of Image Recognition for Underwater Vehicle Applications. In: International Seminar on the Application of Science & Mathematics , 1-3 Nov 2011, Kuala Lumpur.

Syed Ahmad, Sharifah Sakinah (2011) Feature and Instance selection via cooperative PSO. In: 2011 IEEE International Conference on Systems, Man, and Cybernetics (SMC), , 9-12 Oct. 2011 , Anchorage, AK, US.

Syed Mohamad Shazali, Syed Abdul Hamid and Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Ali, Fara Ashikin and Anuar , Mohamed Kassim (2011) Object with symmetrical pattern recognition with dynamic size filter. In: 2011 IEEE Colloquium on Humanities, Science and Engineering (CHUSER), , 5-6 Dec 2011, Penang.

T., Joseph Sahaya Anand and Mei Ying, Lim and Mazalan, Nor Hamizah (2011) Electrodeposited MoTe2 Thin Films for Photoelectrochemical (PEC) Cell Applications. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

T., Joseph Sahaya Anand (2011) TEM Studies of SPUTTER-DEPOSITED Ni4Al Alloy Thin Films. In: International Conference on Nanotechnology and Ultrasound, 12 - 14 January 2011, Tiruchirapalli, INDIA.

T., Joseph Sahaya Anand and Mei Ying, Lim and Mazlan, Nor Hamiza (2011) Synthesis and Characterization of MoTe2 Thin Films for Photoelectro-chemical Cell Applications. In: United Kingdom - Malaysia - Ireland Engineering Science Conference 2011 , 12-14 July 2011, University of Malaya, 50603 Kuala Lumpur, Malaysia.

T. Joseph, Sahaya Anand and S., Shariza and Z. M. , Rosli (2011) Structural and Optical Properties of Electrodeposited MoS2 Thin Films for Photoelectrochemical (PEC) / Solar Cell Applications. In: International Conference on Advanced Manufacturing 2011 , May 23 – 24, 2011, TATi University College, , Terengganu.

Tan, CheeFai and Alkahari, M.R. and Abdul Rahman, M. N. (2011) Development of Ground Vehicle for Fire Fighting Purpose. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Tan, CheeFai and Ranjit, S.S.S. and Ong, S.T, and Ngeow, Y.W. (2011) The Sustainable Technological Innovation among SMEs in South East Asia Countries: A Case Study. In: 29th Conference of the ASEAN Federation of Engineering Organization (CAFEO), 27-30 November 2011, Brunei Darussalam.

Tan, CheeFai and Ranjit, S.S.S. and Ong, S.T. and Ngeow, Y.W. (2011) Accreditation Engineering Scenario and Future of Engineering Education in Malaysia. In: naugural FEIAP Convention: Engineering Education and Accreditation, 2-7 October 2011, Singapore.

Tan, Chee Fai and Chen, Wei and Sarban Singh, Ranjit Singh and Rauterberg, Matthias (2011) The Modeling Of Adaptive Neck Support System For Economy Class Aircraft Seat. In: Malaysian Technical Universities International Conference On Engineering & Technology (MUiCET 2011), 13-15 November 2011, Batu Pahat, Johor, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) A Comparative Analysis of Supplier Performance Measures for Malaysian Aero Composite Manufacturing Companies: Case Study. In: 15th International Conference on ISO & TQM (ICIT 15), 26-28 July 2011, Kuala Lumpur, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) Do Manufacturing Performance leads to Green Supply Chain Practices? In: 15th International Conference on ISO & TQM (ICIT 15), 26-28 July 2011, Kuala Lumpur, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) Green Practice in the Supply Chain: The Case of Malaysian Aero Composite Manufacturing Industry. In: ADVANCED PROCESSES AND SYSTEM IN MANUFACTURING APSIM 2011, 14-15 December 2011, Kuala Lumpur, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2011) The Relationship between Manufacturing System Performance and Green Practices in Supply Chain Management. In: ICME 2011 : International Conference on Manufacturing Engineering, 28-30 December 2011, Venice, Italy.

Wan Mohd Ghazali, Khadijah and Hassan, Rosilah and Md. Ali, Zulkarnain (2011) Simulation tool for active learning of introductory computer network subjects. In: 1st National Conference on Active Learning - NCAL 2011, Melaka., Universiti Teknikal Malaysia.

Wan Mohd Ghazali, Khadijah and Hassan, Rosilah and Md. Ali, Zulkarnain (2011) Simulation tool for active learning of introductory computer network subjects. In: 1st National Conference on Active Learning - NCAL 2011 , 10 December 2011, Melaka, Malaysia .

Wasim, Muhammad Abbas and Yahaya, Saifudin Hafiz and Jamal, Ena and Abd Majid, Ahmad and Md. Ali, Jamaludin (2011) Spur gear tooth design and transition curve as a spiral using cubic trigonometric Bezier function. In: 2011 Eighth International Conference Computer Graphics, Imaging and Visualization, 17-19 August 2011, Singapore.

Wong, Yan Chiew and Noordin, Nurul Hazlina and El-Rayis, Ahmed O. and Haridas, Nakul and Erdogan, Ahmet T. and Arslan, Tughrul S. (2011) An evaluation of 2-phase charge pump topologies with charge transfer switches for green mobile technology. In: IEEE International Symposium on Industrial Electronics (ISIE), 27-30 June 2011, Poland.

Wong, Yan Chiew and Zhou, Wei and El-Rayis, Ahmed O. and Haridas, Nakul and Erdogan, Ahmet T. and Arslan, Tughrul S. (2011) Practical design strategy for two-phase step up DC-DC fibonacci switched-capacitor converter. In: 20th European Conference onCircuit Theory and Design (ECCTD), 29-31 August 2011, Sweden.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Sim, Edwin Y. S. and Yaw, M. W. (2011) ARTIFICIAL IMMUNE ALGORITHM BASED GRAVIMETRIC FLUID DISPENSING MACHINE. In: Eleventh International Conference on Hybrid Intelligent Systems (HIS 2011), 5-8 December 2011, Malacca.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Antibody Remainder Method Based Artificial Immune System for Mathematical Function Optimization. In: 3rd International Conference on Machine Learning and Computing (ICMLC 2011) , 26-28 Feb 2011, Singapore.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Artificial Immune System based on Hybrid and External Memory for Mathematical Function Optimization. In: 2011 IEEE Symposium on Computers & Informatics, 20-22 March 2011, Kuala Lumpur.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Sim, Edwin Y. S. and Yaw, M. W. (2011) Artificial Immune Algorithm Based Gravimetric Fluid Dispensing Machine. In: 11th International Conference on Hybrid Intelligent Systems 2011 (HIS 2011) , 5-8 December 2011, Melaka. (Submitted)

Yudi Hidayat, Erwin and Fajrian, Nur Adnan and Draman @ Muda, Azah Kamilah and Choo, Yun Huoy and Ahmad, Sabrina (2011) A comparative study of feature extraction using PCA and LDA for face recognition. In: 7th International Conference on Information Assurance and Security (IAS 2011), 5-8 December 2011, Melaka. (Submitted)

Yusof, R. and Selamat, S. R. and Sahib, S. and Abdollah, M. F. and Mas'ud, M. Z. and Ramly, M. (2011) A New Malware Attack Pattern Generalization. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Yusof, R. and Selamat, S. R. and Sahib, S. and Mas'ud, M. Z. and Abdollah, M. F. (2011) Enhanced Alert Correlation Framework for Heterogeneous Log. In: The International Conference on Informatics Engineering & Information Science (ICIEIS2011), Nov. 14-16, 2011, University Technology Malaysia, KL Malaysia. (In Press)

Yusup Lada, Musa and Mohindo, Othman and Khamis, Aziah and Mat Lazi, Jurifa and Jamaludin, Irma Wani (2011) Simulation Single Phase Active Filter Based on p-q technique using MATLAB/Simulink Development Tools Environment. In: IEEE Applied Power Electronics Colloquium 2011, 2011, Johor Baharu.

Zainal Abidin , N.F and Salleh, M.S. and Minhat, M and Arep, H (2011) STEP-NC Controller ̶ Testing and Commissioning for Open Architecture Control System. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Zainuddin, Hidayat and Lewin, P.L. and Mitchinson, P.M. (2011) Investigation on the surface discharge phenomenon at the oil-pressboard interface. In: 17th IEEE International Conference on Dielectric Liquids, 26-30 June 2011, Trondheim, Norway.

Zainuddin, Hidayat and Lewin, P.L. and Mitchinson, P.M. (2011) Modeling the inter-phase region of high voltage transformers. In: 17th IEEE International Conference on Dielectric Liquids, 26-30 June 2011, Trondheim, Norway.

Zainuddin, Hidayat and Mitchinson, P.M. and Lewin, P.L. (2011) A method for the measurement of leakage current due to surface discharge at the oil-pressboard interface. In: IEEE 2011 Electrical Insulation Conference, 5-8 June 2011, Annapolis, Maryland, USA.

Zaiton, A M and Kamarul , A M and Mohd Soufhwee, A R and Haeryip, Sihombing and Mohd Yuhazri, Yaakob (2011) A case study of student performance in electric circuit 2 subject. In: 5th PSU-UNS International Conference on Engineering and Technology (ICET-2011 ), May 2-3, 2011, Prince of Songkhla University, Thailand. (Submitted)

Zaiton, A.M. and Kamarul, A.M. and Sihombing, Haeryip and Mohd Yuhasri, Y. (2011) THE 'FITTED’ MANAGEMENT FOR HUMAN CAPITAL DEVELOPMENT IN PUBLIC SECTOR. In: 2011 International Conference on Economic, Education and Management (ICEEM2011), March 5-6, 2011, Macao.

Zaiton, A.M. and Lee, C.T. and Irda, H. (2011) Performance Optimization of Erbium Doped Fiber Amplifier in Wavelength Division Multiplexing System for Long Haul Transmission. In: The International Conference on Informatics Engineering & Information Science (ICIEIS2011), Nov. 14-16, 2011, University Technology Malaysia, Malaysia.

Zaiton , A.M. and Kamarul, A.M. and Mohd Soufhwee , A. R. and Haeryip , Sihombing and Mohd Yuhazri, Y. (2011) A CASE STUDY OF STUDENT PERFORMANCE IN ELECTRIC CIRCUIT 2 SUBJECT. In: THE 5TH PSU-UNS INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY, May 2-3, 2011, PHUKET, THAILAND.

Zakaria, Mohd Hafiz and Watson, Jason and Edwards, Sylvia L. (2011) The adoption of e-learning 2.0 in higher education by teachers and students: An investigation using mixed methods approach. In: IEEE International Conference on e-Education, e-Business, e-Management and E-Learning, 7 - 9 January 2011 , Mumbai, India.

Zakaria, Zahriladha and Ahmad, Badrul Hisham (2011) Design Of SIW Bandpass Filter With 6 Db Offset. In: UNSPECIFIED.

Zakaria, Zahriladha and Ahmad, Badrul Hisham (2011) Design Of Siw Bandpass Filter With 6 Db Offset. In: 2011 IEEE International RF and Microwave Conference (RFM 2011), 12-14 December 2011, Seremban, Negeri Sembilan. (Submitted)

Zhibin, Yu and Mohd Saat, Fatimah Al Zahrah and Jaworski, Artur (2011) EXPERIMENTAL TESTING OF THE FLOW RESISTANCE AND THERMAL CONDUCTIVITY OF POROUS MATERIALS FOR REGENERATORS. In: The 23rd IIR International Congress of Refrigeration, 21-26 August 2011, Prague, Czech Republic.

massila, kamalrudin and john, grundy (2011) Generating essential user interface prototypes to validate requirements. In: 26th IEEE/ACM International Conference on Automated Software Engineering (ASE), 2011 .

syed mohamed, muhammad syafiq (2011) Ergonomics Assessment Of Tin Snips. In: 5th PSU-UNS International Conference on engineering and technology (ICET-2011) , 2-3 May, Phucket, Thailand. (Submitted)

Book

Abd Ghani, M. K. (2011) Software Project Management: A Practical Guide to manage Small Software Development Project. Penerbit UTeM, Malaysia.

Abd Ghani, M. K. and Sulaiman, S (2011) Software Requirement Analysis and Design: Object-oriented approach with UML. Penerbit UTeM, Malaysia.

Buyong, Edna and Rajiani, Ismi (2011) Cognitive and affective evaluation in forming unique destination image among tourists visiting Malacca. Brand, identity and reputation: Exploring, Creating New Realities and Fresh Perspectives on Multi-Sensory Experiences . Kogan Page, Oxford, United Kingdom. ISBN 0-9549730-6-2

Hanipah, Hussin and Ruziah , Ali and Ahmad Yusairi, Bani Hashim (2011) Batik, Lambang Warisan Teknologi Dan Inovasi. UTeM, Melaka. ISBN 9789670257006

Kok, Swee Leong and White, Neil and Harris, Nick (2011) DESIGN, FABRICATION AND CHARACTERISATION OF FREE-STANDING THICK-FILM PIEZOELECTRIC CANTILEVERS FOR ENERGY HARVESTING. LAP LAMBERT Academic Publishing, Germany. ISBN 978-3-8443-8969-2

Marjom, Zolkarnain and Attan, Hassan (2011) ENGINEERING GRAPHICS & CADD. NA. (Submitted)

Nahar, H. (2011) Basic Understanding on How Chat System Works : A Simple Protocol using Java Language. LAP LAMBERT Academic Publishing GmbH & Co. KG, Saarbrücken, Germany. ISBN 978-3-8443-9334-7

Sivarao, Subramonian and Mohd Shukor, Salleh and T. Joseph, Sahaya Anand and Syamimi , Samsudin and Ian Peter, Hasoloan Haery (2011) A Compilation Of Various Research In Manufacturing Engineering Part 1. Penerbit Universiti Teknikal Malaysia Melaka, pp. 1-178.

T., Joseph Sahaya Anand (2011) INTERMETALLIC NICKEL ALUMINIDES BEING AN ALTERNATIVE FOR AUTOMOTIVE BODY APPLICATIONS. Lambert Academic Publisher (LAP), Germany. ISBN 987-3-8443-9835-9

T. , Joseph Sahaya Anand (2011) Can Nickel replace Steel in Automotive Industry? An Overview. Lambert Academic Publisher (LAP), Germany. ISBN 987-3-8465-5475-3

Tay, Choo Chuan and Sakidin, Hamzah and Sek, Yong Wee and Law, Check Yee (2011) Review On Statistics (Second Published). Penerbit Universiti Teknikal Malaysia Melaka, Malacca. ISBN 9789832948650

Tay, Choo Chuan and Muhamad, Mohd Razali and Tam, Cai Lian and Sek , Yong Wee and Asmai, Siti Azirah (2011) STATISTICS WITH SPSS FOR RESEARCH. UTeM, Malacca. ISBN 9789670257044

ahmad kamely, mohamad and Sachlan, Ermansyah and Sivarao, Subramonian (2011) PREDICTION OF THE BENDING STRENGTH USING RESPONSE SURFACE METHODOLOGY. Curran Associates, Inc, 57 Morehouse Lane ,Red Hook, NY 12571 USA , United State. ISBN 978-1-4577-0005-7

Thesis

Aziz, Fuziana (2011) Relationship between organizational citizenship behaviour and sales achievement at TM Southern region. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Zuraini (2011) The impact of job satisfaction towards employee performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bujal, Siti Fatimah (2011) The impacts of transformational leadership on organizational outcome: Study in SMEs. Masters thesis, Universiti Teknikal Malaysia Melaka.

Eng, Poh Hwa (2011) The impact of facebook design features on popularity of the photography facebook pages. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Yee Khim (2011) Vendor evaluation and selection. Masters thesis, UTeM.

Mohammad Rashidi, Razali (2011) The Study Of Lean Principles To Support The Environmental Management System (EMS). Masters thesis, UTeM.

Mohd Syaiful Redzwan , Mohd Shah (2011) Dual Polarization Microstrip Array Antenna For WLAN Application. Masters thesis, UTeM.

Muhammad Faiz, Abdul Kadir (2011) Polarization Diversity In Multiple Input multiple output wireless communication system. Masters thesis, UTeM.

Noor Zuraidin, Mohd Safar (2011) Characterizing Botnet In P2P Network For UDP Protocol. Masters thesis, UTeM.

Sadab, Ahmad Qamruddin (2011) Exploring the impact of training and development on performance and productivity in organization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sutika Intan Suraya, Mohd Suhaimi (2011) Behaviour of higher education students in choosing internet service provider in Malacca. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tai, Yi Kwan (2011) Talent management among small and medium enterprises (SMEs) in Melaka for its sustainability. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yusuf, Malisa Suhana (2011) Leadership styles and business performance effectiveness. Masters thesis, Universiti Teknikal Malaysia Melaka.