Items where Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: | - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 953.

Ab Ghani, Mohd Ruddin and Affandi, Rosnani and Gan, Chin Kim and Raman, Siti Hajar and Jano, Zanariah (2014) The Influence of Concentrator Size, Reflective Material and Solar Irradiance on the Parabolic Dish Heat Transfer. Indian Journal of Science and Technology, 7 (9). pp. 1454-1460. ISSN 0974-5645

Affandi, Rosnani and Chin, Kim Gan and Ab Ghani, Mohd Ruddin (2014) Prospective Of Implementing Concentrating Solar Power (CSP) In Mlaysia Environment. World Applied Sciences Journal, 32 (8). pp. 1690-1697. ISSN 1818-4952

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Che Hanapi, Naim Che Pee (2014) Mapping of Personalized Learning Environment (PLE) among Malaysian‟s Secondary School. In: Intl. Conf. on Advances In Computing, Communication and Information Technology - CCIT 2014., 1-2 June 2014, University of Westminster London United Kingdom.

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Naim Che Pee, Che Hanapi (2014) Personalized Learning Environment (PLE) Experience in the 21st Century: Review of Literature. In: Third World Congress on Information and Communication Technologies (WICT 2014), 8-11 December 2014, MITC Melaka.

Emhammed, Misbah Abdelsalam Misbah and Ho, Yih Hwa (2014) Towards The Utilization of Normalized LMS Algorithm in Adaptive Filter. IOSR journal of VLSI and Signal Processing (IOSRJVSP), 4 (2). pp. 62-67. ISSN 2319 – 4200

Lim, PAULINE and Nayan, NAFARIZAL and Sahdan, MOHD ZAINIZAN and Dahlan, SAMSUL HAIMI and Zainal Abidin, ZUHAIRIAH and Ismail, MUHAMMAD YUSOF and Che Seman, FAUZIAHANIM and Suaidi, MOHD KADIM and Johar, MOHD FAUZI and Mohd Rosli, ZULKIFLI and Mohamad Juoi, JARIAH and I. Kiani, GHAFFER (2014) Optimization of transmission lost for energy saving glass with different sheet resistance values. Advanced Materials Research , Vol. 8. 233.-236.. ISSN 1022-6680

Mansor, Nur Farraliza and Abal Abas, Zuraida and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad and Sidek, Safiah (2014) An Optimization Solution Using A Harmony Search Algorithm. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), Spcl (-). pp. 1745-1749. ISSN 1013-5316

Putit, Lennora and Hasan, Hazmilah and Ahmad Suki, Amirah and Shahbodin, Faaizah (2014) Commercialization of University Research Products and its Outcome on University Performance. International Journal of Business and Management Studies, 3 (1). pp. 483-495. ISSN 21581479

Rajes, K.M.Rajan (2014) Synthesis And Characterization Of Electrodeposited Nickel Chalcogenides For Photoelectrochemical/ Solar Cell Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

-

-, Mustafa Almahdi Algaet and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and -, Aouache Mustapha and -, Ali Ahmad Milad (2014) A Review on Provisioning Quality of Service of Wireless Telemedicine for E-Health Services. Middle-East Journal of Science Research. pp. 1-23. ISSN 1990-9233

-, Suzi Iryanti Fadilah and Shibghatullah, Abdul Samad and Abal Abas, Zuraida and Abd Wahab, Mohd Helmy and Hashim, Wan Nur Wahidah (2014) Performance Analysis For Wireless G (IEEE 802.11 G) And Wireless N (IEEE 802.11 N) In Outdoor Environment. In: CCE2014, 24-25 June 2014, Politeknik Seberang Perai, Penang .

-, MUSTAFA ALMAHDI ALGAET and MUHAMAD NOH, ZUL AZRI and Shibghatullah, Abdul Samad and -, ALI AHMAD MILAD and -, AOUACHE MUSTAPHA (2014) Telemedicine and its application in telemedicine management. Outskirts Press, Inc..

-, Mustafa Almahdi Algaet and Muhamad Noh , Zul Azri and Shibghatullah, Abdul Samad and -, Aouache Mustapha and -, Ali Ahmad Milad (2014) Provisioning Quality of Service of Wireless Telemedicine for E-Health Services: A Review. Wireless Personal Communications An International Journal. pp. 1-34. ISSN 0929-6212

A

A. P., Puvanasvaran and Jamibollah, N and N., Norazlin (2014) INTEGRATION OF POKA YOKE INTO PROCESS FAILURE MODE AND EFFECT ANALYSIS: A CASE STUDY. American Journal of Applied Sciences, 11 (8). pp. 1332-1342. ISSN 1546-9239

A. P., Puvanasvaran and V. A. , Alagendran and N., Norazlin (2014) Developing Lean – EMS Integration Database for Sustaining ISO 14000 Certification. Manufacturing Science and Technology 2(2): 34-44, 2014, 2 (2). pp. 34-44. ISSN DOI: 10.13189/mst.2014.020202

A. P., Puvanasvaran and Y., Hui Hui and N., Norazlin (2014) MANAGING WASTE ELIMINATION DATABASE IN LEAN MANUFACTURING: IMPROVE PROBLEM SOLVING CAPABILITY. American Journal of Engineering and Applied Sciences, 7 (2). pp. 271-281. ISSN 1941-7020

A. P., Puvanasvaran (2014) Lean Manufacturing: Tools & Techniques. UTeM.

A. P., Puvanasvaran and N., Norazlin and C., Suk Fan (2014) Lean Behavior Impact Towards Lean Management: Case Study. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 17-26. ISSN 1985-3157

A. Perumal, Puvanasvaran and Jamibollah, N.Jamibollah and Norazlin Nasir, N.Norazlin and Adibah Razali, R. Adibah (2014) Poka-Yoke Integration into Process FMEA. Australian Journal of Basic and Applied Sciences, 8 (7). pp. 66-73. ISSN 1991-8178

ABD RAZAK , JEEFFERIE and MOHAMAD, NORAIHAM (2014) NR/EPDM Elastomeric rubber blend miscibility evaluation by two-level fractional factorial design of experiment. AIP Proceedings - The 2014 UKM FST Postgraduate Colloquium, 1614. pp. 82-89. ISSN doi:10.1063/1.4895176 (In Press)

ABD RAZAK , JEEFFERIE and Mohamad, Noraiham and Shamsuri, Siti Rahmah (2014) The Effects of Covalent Treated Graphene Nanaoplatelets Surface Modification to Cure Characteristic, Mechanical, Physical and Morphological Properties of NR/EPDM Rubber Blend Nanocomposites. Advances in Environmental Biology, 8 (8 Spec). pp. 3289-3298. ISSN 1995-0756 (In Press)

ABDULLAH, Mohd Azman and Ramli, Faiz Redza and Lim, Ching Sheng (2014) Railway Dynamics Analysis Using Lego Mindstorms. Applied Mechanics and Materials , Volume. pp. 13-17. ISSN 1662-7482

Ab Azis, Fadilah and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Othman, Muhammad Nur and Khamis, K.S. and Ghani, O.A.A. (2014) Modelling and Analysis of All Terrain Vehicle (ATV) using System Identification for Yaw Stability. In: International Conference on Design and Concurrent Engineeting (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.

Ab Azis, Fadilah and Mohd Aras, Mohd Shahrieel and Ali, Fara Ashikin and Othman, Muhammad Nur and Abdullah, Shahrum Shah and Lim , Wee Teck and Lee, Dai Cong (2014) Study on the Effect of Shifting ‘Zero’ in Output Membership Function on Fuzzy Logic Controller of the ROV using Micro-box Interfacing. In: The 5th International Conference on Underwater System Technology : Theory and Application (USYS'14), 3-4 December 2014, Bayview Hotel Melaka.

Ab Azis, Fadilah and Mohd Aras, Mohd Shahrieel and Syed Abdul Hamid , Syed Mohamad Shazali and Ali, Fara Ashikin and Daswir, Saiful Edwend (2014) Development of Lighting System for Imitating Multi Depth Underwater Light Condition. In: The 5th International Conference on Underwater System Technology : Theory and Application (USYS'14), 3-4 December 2014, Bayview Hotel Melaka.

Ab Ghani, Mohd Ruddin and Hasan, Ihsan Jabbar and Gan, Chin Kim (2014) Optimum distributed generation allocation using PSO in order to reduce losses and voltage improvement. In: International Conference on Clean Energy and Technology (CEAT 2014), 24-26 November 2014, Kuching, Sarawak, Malaysia.

Ab Ghani, Mohd Ruddin and Affandi, Rosnani and Gan, Chin Kim and Raman, Siti Hajar and Jano, Zanariah (2014) The Inluence Of Concentrator Size, Reflective Material And Solar Irradiance On The Parabolic Dish Heat Transfer. Indian Journal Of Science And Technology (INDJST), 7 (9). pp. 1454-1460. ISSN 0974-6846

Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Affandi, Rosnani (2014) Development of Design Parameters for the Concentrator of Parabolic Dish (PD) Based Concentrating Solar Power (CSP) under Malaysia Environment. Journal of Applied Science and Agriculture, 9(11) . pp. 42-48. ISSN 1816-9112

Ab Ghani, Mohd Ruddin and Raman, Siti Hajar and Mat Hanafiah, Mohd Ariff and Wan Jusoh, Wan Nor Shela Ezwane (2014) A Human Machine Interface (HMI) Framework for Smart Grid System. In: 2014 IEEE INNOVATIVE SMART GRID TECHNOLOGIES - ASIA (ISGT ASIA) Conference, 20 - 23 May 2014, Kuala Lumpur, Malaysia.

Ab Ghani, Mohd Ruddin and Wan Jusoh, Wan Nor Shela Ezwane and Mat Hanafiah, Mohd Ariff and Raman, Siti Hajar (2014) Remote Terminal Unit (RTU) Hardware Design And Development For Distribution Automation System. In: 2014 IEEE INNOVATIVE SMART GRID TECHNOLOGIES - ASIA (ISGT ASIA) Conference, 20 - 23 May 2014, Kuala Lumpur, Malaysia.

Ab Ghani, Mohd Sabri and Hashim, Nik Mohd Zarifie and Abdullah Zawawi, Noor Liliah Erlina and Darsono, Abdul Majid and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Application Of Digital Signal Processing In Radar : A Study. International Journal of Advanced Engineering Research and Technology, 2 (7). pp. 233-236. ISSN 2348 – 8190

Ab Hadi, Nik Azran and A Aziz, Khairul Azha and Hashim, Nik Mohd Zarifie and Omar, Muhammad Shukri and Jaafar, Anuar (2014) Booth’s Algorithm Design Using Field Programmable Gate Array. International Journal For Advance Research In Engineering And Technology, 2. pp. 86-93. ISSN 2320-6802

Ab Rahman, Mahmood and Mohamad, Minhat and Halim, Isa and Baharudin, Abu Bakar (2014) Investigation of cutting parameter and machine tool vibration effects using regression analysis to enhance part dimensional accuracy. Applied Mechanics and Materials, 761 (-). pp. 93-97. ISSN 1662-7482

Ab Rashid, Mohd Zamzuri and Shah, HNM and Mohd Aras, Mohd Shahrieel and Kamarudin, Muhammad Nizam and Mohammed Kassim, Anuar and Jaafar, Hazriq Izzuan (2014) METAL LINE DETECTION: A NEW SENSORY SYSTEM FOR LINE FOLLOWING MOBILE ROBOT. Journal of Theoretical and Applied Information Technology (JATIT), 64 (3). pp. 756-764. ISSN 1992-8645

Ab Rashid, Mohd Zamzuri and Mohd Shah, Hairol Nizam and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel and Sayed Nordin, Sayed Kushairi (2014) Sorting And Retrieval Robotic System Controlled Via Programmable Logic Controller For Library Usage. International Journal Of U-And E-Service, Science And Technology, 7 (4). pp. 19-30. ISSN -

Ab Rashid, Mohd Zamzuri and Sayed Nordin, Sayed Kushairi (2014) Design And Control Of Aquarium Water Management System Using Programmable Logic Controller (PLC). International Journal of Science and Research (IJSR), 3 (9). pp. 1049-1055. ISSN 2319-7064

Ab. Rahman , Mahmood and Elfi , R.I.F. and Baharudin, Abu Bakar and Najib, A. M. and Saptari, Adi and Nur Izan Syahriah, Hussein and Isa , Halim (2014) Establishment of Process Capability of Machine Centre Driling Using Multiple Regression Analysis. Applied Mechanics and Materials, 465-466 (-). pp. 740-745. ISSN 1660-9336

Abaas, Thamer and Shibghatullah, Abdul Samad and Yusof, R. (2014) Importance and significance of information sharing in terrorism field. Science International. pp. 1719-1725. ISSN 1013-5316

Abaas, Thamer and Shibghatullah, Abdul Samad and Musa Jaber, Mustafa (2014) Use Information Sharing Environment Concept To Design Electronic Intelligence Framework For Support E-Government : Iraq As Case Study. Advances in Computing, 4 (1). pp. 22-24. ISSN 2163-2944

Abal Abas, Zuraida and Salleh, Shaharuddin and Ilias, Shazwani and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad and Mohd Aboobaider, Burhanuddin and Sidek, Safiah (2014) An insight into the science of unstructured meshes in computer numerical simulation. Applied Mathematical Sciences. 8493 -8516. ISSN 1312-885X

Abal Abas, Zuraida and Shaffiei, Zatul Alwani and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad (2014) Using harmony search for optimising university shuttle bus driver scheduling for better operational management. In: nternational Conference on Innovative Trends in Multidisciplinary Academic Research, October 20-21, 2014, Istanbul, Turkey.

Abbas, Thamer and Shibghatullah, Abdul Samad and Yusof, R. and Alaameri, Alaa (2014) Importance and significance of information sharing in terrorism field. In: ISORIS 2014, 15-16 October 2014, UTeM.

Abd Halim, Wahidah and Abd Rahim, Nasrudin and Azri, Maaspaliza (2014) Selective Harmonic Elimination For A Single-Phase 13-Level TCHB Based Cascaded Multilevel Inverter Using FPGA. Journal of Power Electronics (JPE), 14 (3). pp. 488-498. ISSN 1598-2092

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusaini (2014) Classification Analysis Of High Frequency Stress Wave For Autonomous Detection Of Defect In Steel Tubes. AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, 8. pp. 251-257. ISSN 1991-8178

Abd Halim, Zakiah and Jamaludin, Nordin and Syarif, Junaidi and Syed Yahya, Syed Yusainee (2014) Detection And Analysis Of Defect In Steel Tube Using Vibration Impact Acoustic Emission Method. International Review of Mechanical Engineering (I.RE.M.E.), 8. pp. 277-282. ISSN 1970-8734

Abd Khair, Fazlin and Putra, Azma and Mohd Nor, Mohd Jailani and Mohd Lazim, Nurul Atiqah and Selamat, Mohd Zulkefli (2014) Preliminary Study On Bamboo As Sound Absorber. Applied Mechanics and Materials, 554 (-). pp. 76-80. ISSN 1660-9336

Abd Manap, Nurulfajar and Soraghan, John J. (2014) Disparity depth map layers representation for image view synthesis. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) . pp. 1-8. ISSN 2180-1843

Abd Manap, Nurulfajar and Ibrahim, Masrullizam Mat and Soraghan, John and Petropoulakis, Lykourgos (2014) Multi-Camera View Synthesis Based On Depth Image Layer Separation (DILS) Algorithm. Advanced Science Letters, 20 (10-12). pp. 1837-1841. ISSN 1936-6612

Abd Rafe, ElZamly and Burairah, Hussin (2014) A Comparison Of Stepwise And Fuzzy Multiple Regression Analysis Techniques For Managing Software Project Risks: Analysis Phase. Journal of Computer Science , 10 (10). pp. 1725-1742. ISSN 1549-3636

Abd Rashid, Kamarul Ariffin and Husain, Mohd Nor and Othman, Abdul Rani and Abd Aziz, Mohamad Zoinol Abidin and Saad, M.M and Senon , M. and Ahmad , M. T. and Hamidon, J. Sam (2014) Design Of Linear Polarization Antenna For Wireless MIMO Application. ARPN Journal Of Engineering And Applied Sciences, 9 (7). pp. 1026-1030. ISSN 1819-6608

Abd Razak, Jeefferie and Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub, Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile Surface Modification Of Graphene Nanoplatelets (GNPS) Using Covalent ATPS-Dehydration (GNPS-ATPS) And Non-Covalent Polyetherimide Adsorption (GNPS-PEI) Method. APPLIED MECHANICS AND MATERIALS, 761 (-). pp. 391-396. ISSN -

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam Dr, Chantara Thevy A/P and Mahamood, Mazlin Aida and Lau, Kok Tee and Ab Maulod, Hairul Effendy and Munawar, Rose Farahiyan and Mohamad, Noraiham (2014) Non-Covalent Polymeric Wrapping Of Igepal C0890 Fo Graphene Nanoplatelets (Gnps-C0890) Filled Nr/Epdm Rubber Blend Nanocomposites. Applied Mechanics and Materials, 761. pp. 385-390. ISSN 1660-9336

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub , Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile surface modification of graphene nanoplatelets (GNPs) using covalent ATPS-dehydration (GNPs-ATPS) and non-covalent polyetherimide adsorption (GNPs-PEI) method. Applied Mechanics and Materials, 761. pp. 391-396. ISSN 1660-9336 (In Press)

Abd Razak, Jeefferie and Ahmad, Sahrim and Thevy Ratnam, Chantara and Shueb, Mohammed Iqbal and Mahamood, Mazlin Aida and Yaakub, Juliana and Shamsuri, Siti Rahmah and Mohamad, Noraiham (2014) The Effects Of Covalent Treated Graphene Nanaoplatelets Surface Modification To Cure Characteristic,Mechanical, Physical And Morphological Properties Of NR/EPDM Rubber Blend Nanocomposites. Advances in Environmental Biology, 8. pp. 3289-3298. ISSN 1995-0756

Abd Razak, Jeefferie and Sufian, Suriati and Chin, Sze Mei (2014) Synthesis And Characterization Of Hematite Nanoparticles As Active Photocatalyst For Water Splitting Application. Key Engineering Materials, 594-59. pp. 73-77. ISSN 1013-9826

Abd. Aziz, Mohamad Zoinol Abidin and Abd Rashid, Kamarul Ariffin and Husain, Mohd Nor and Othman, Abdul Rani and Saad, Muhammad Majdi and Senon, Misida and Ahmad, Mohamad Tarmizy and Hamidon, J. S. (2014) Design Of Linear Polarization Antenna For Wireless Mimo Application. ARPN Journal Of Engineering And Applied Sciences, 9. pp. 1026-1030. ISSN 1819-6608

Abd. Aziz, Mohamad Zoinol Abidin and Anuar, M. R. and Jaafar, Anuar and Hashim, Nik Mohd Zarifie and Salleh, Azahari and Ja'afar, A. S. (2014) Graphical User Interface For Wireless Patient Monitoring System Using Zigbee Communication. ARPN Journal of Engineering and Applied Sciences, 9. pp. 1554-1558. ISSN ISSN 1819-6608

Abd. Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Ahmad, Badrul Hisham and Suaidi, Mohamad Kadim and Othman, Mohd Azlishah (2014) Design Of Dual Band Antenna For WLAN Application. Jurnal Teknologi, 67. pp. 71-77. ISSN E-ISSN2180-3722

Abd. Manap, Abreeza Noorlina and Omar, Nooririnah and Misran, Mohamad Harris and Okabe, T and Ogawa, K (2014) Experimental And SPH Study Of Cold Spray Impact Between Similar And Dissimilar Metals. Institute of Materials, Minerals and Mining, 30 (5). pp. 335-341. ISSN -

Abdelrafe , Elzamly and Burairah, Hussin (2014) Managing Software Project Risks (Analysis Phase) with Proposed Fuzzy Regression Analysis Modelling Techniques with Fuzzy Concepts. Journal of Computing and Information Technology, 22 (2). pp. 131-144. ISSN 1846-3908

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Drive to Greener Future: Tribological and Engine Performances of Nano-Oil. In: JAST Tribology Conference, Spring 2014, 19 - 21 May 2014, Tokyo.

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.

Abdollah, Mohd Fadzli and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and Tamaldin, Noreffendy (2014) Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions. Jurnal Teknologi , 66 (3). pp. 43-49. ISSN 2180-3722

Abdul Aziz , Adam (2014) Fabrication and characteristic study of alumina tool using cold isotatic press. Masters thesis, UTeM.

Abdul Kadir, Aida Fazliana and Khatib, Tamer and Wilfried, Elmenreich (2014) Integrating Photovoltaic Systems In Power System : Power Quality Impacts And Optimal Planning Challenges. International Journal of Photoenergy, 2014 (-). pp. 1-7. ISSN -

Abdul Kadir, Aida Fazliana and Mohamed, Azah and Shareef, Hussain and Ibrahim, Ahmad Asrul (2014) An Improved Gravitational Search Algorithm For Optimal Placement And Sizing Of Renewable Distributed Generation Units In A Distribution System For Power Quality Enhancement. Journal Of Renewable And Sustainable Energy, 6 (-). pp. 1-17. ISSN 1941-7012

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and ABDULLAH, Mohd Azman and HUDHA, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID with Experimental Throttle-in-the-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and Abdullah, Mohd Azman and Hudha, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID With Experimental Throttle-In-The-Loop. International Review on Modelling & Simulations, 7. pp. 682-693. ISSN 1974-9821

Abdul Karim, Kasrul and Othman, Md Nazri and Wan Hassan, Wan Ahmas Redhauddin and Bugis, Mohd Ismadi and Ramli, Mohd Zulkifli and Abdullah, Abdul Rahim and Jidin , Auzani (2014) Electric Vehicle Development And Prediction Of Battery Consumption Based On A Journey Profile. Applied Mechanics and Materials, 699. pp. 794-799. ISSN 1660-9336

Abdul Khalid, Fararishah and Gilbert, David and Huq, Afreen (2014) THE WAY FORWARD FOR BUSINESS INCUBATION PROCESS IN ICT INCUBATORS IN MALAYSIA. International Journal of Business and Society. pp. 23-33. ISSN 15116670 (Submitted)

Abdul Khalid, Fararishah and Gilbert, David and Huq, Afreen and Jabar, Juhaini and Musa, Haslinda (2014) The role of marketing and promotion management in ICT incubatee assistance in Malaysia. Malaysian Management Review. pp. 23-33. ISSN 0025-1348 (In Press)

Abdul Manaf, Muhammad Zaidan and Fakeruddin, Shafarul Hafidi and Mohamad Shukri , Zakaria and Mohd Noor Asril, Saadun and Mohd Hafidzal, Mohd Hanafi (2014) Mini acceleration and deceleration driving strategy to increase the operational time of flywheel hybrid module. Proceedings of International Conference on Mathematics, Engineering & Industrial Applications 2014 (ICOMEIA 2014). pp. 287-292. ISSN 2289-1323 (In Press)

Abdul Rahim , Nur Hidayu and Baharudin, Zikri Abadi and Othman, Md Nazri and Ab Rahman, Puteri Nur Suhaila (2014) The Comparative Study Between Twisted And Non-Twisted Distribution Line For Photovoltaic System Subjected To Induced Voltage Generated By Impulse Voltage. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (8). pp. 5774-5778. ISSN 1693-6930

Abdul Rahim , Nur Hidayu and Baharudin, Zikri Abadi and Othman, Md Nazri and Zakaria, Zahriladha and Ahmad Khiar, Mohd Shahril and Saharuddin, Nur Zawani and Ahmad, Azlinda (2014) Investigation Of Wave Propagation To PV-Solar Panel Due To Lightning Induced Overvoltage. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (1). pp. 47-52. ISSN 1693-6930

Abdul Rashid, Nurulizwa and Shamee, Samer Ali and Jabar, Juhaini (2014) Eco Innovation Effort : A Review Of Dynamic Eco Innovation Practices And New Research Agenda Towards Sustainability Development. International Journal of Innovation and Applied Studies (IJIAS) , 8 (3). pp. 1112-1119. ISSN 2028-9324

Abdul Salam, Azuki and Ab Hadi, Nik Azran (2014) Fuzzy Logic Controller For Shunt Active Power Filter. International Conferences On Engineering Technology And Technopreneurship (ICE2T), - (-). pp. 256-259. ISSN -

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei , Masami (2014) Design and static characteristics measurement of Permanent Magnet Linear Motor (PMLM) for oil palm cutter. In: The 23th MAGDA Conference, 4-5 December 2014, Takamatsu, Japan.

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei , Masami (2014) Structure optimization of 6 slot 8 pole permanent magnet linear motor. In: The 7th IET international conference on Power Electronics, Machines and Drives, PEMD 2014, 8 - 10 April 2014, Manchester, UK.

Abdul Shukor, Fairul Azhar and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Misron, Norhisam and Nirei , Masami (2014) Design of a permanent magnet linear motor for oil palm cutter. In: Technical Meeting on Linear Drives of IEE Japan, 6 Aug. 2014, Shizuoka, Japan.

Abdul Shukor , Fairul Azhar and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Yajima, Hisashi and Kanazawa, Takehiko and Fujiwara, Nobuhiro (2014) Performance evaluation and comparison of switched reluctance cylindrical linear motor. Japan Society of Applied Electromagnetics and Mechanics, 22 (2). pp. 158-163. ISSN 2187-9257

Abdul Syukor, Mohamad Jaya and Abd. Samad, Hasan Basari and Sazalinsyah, Razali and Muhd Razali, Muhamad and Md. Nizam, Ab. Rahman (2014) Modeling of TiN coating thickness using ANFIS. Trans Tech Publications, Switzerland.

Abdul Syukor, Mohamad Jaya and Nur Athirah , Abdul Kadir and Mua'th, Mohamad Jarrah (2014) Modeling of TiN coating roughness using fuzzy logic approach. Science International (Lahore), 26 (4). pp. 1563-1567. ISSN 1013-5316

Abdullah, Abdul Rahim and abidullah, Noor Athira and shamsudin, Nur hazahsha and ahmad, Nur Hafizatul Tul Huda and JOPRI, MOHD HATTA (2014) Power Quality Signals Classification System Using Time-Frequency Distribution. Applied Mechanics and Materials, 494. pp. 1889-1894. ISSN 1662-7482.

Abdullah, Rohana and Abd Rahman, Md Nizam and Khalil, S.N. (2014) Human System Modeling for Optimum Labor Utilization and Man-Machine Configuration. International Journal of Engineering & Technology IJET / IJENS, 14 (1). pp. 75-79. ISSN 2077-1185

Abdullah, Abdul Rahim and goh, zai peng and Ab Ghani, Sharin and JOPRI, MOHD HATTA (2014) A New Vector Draft Method for Harmonic Source Detection at Point of Common Coupling. In: IEEE 8th International Power Engineering and Optimization Conference, 24-25 March 2014, Langkawi, Malaysia.

Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and RAFAN, NUR AIDAWATY and Shaaban, Azizah (2014) Spectral Analysis of Cutting Forces Data for XY Table Ballscrew Drive System. Applied Mechanics and Materials, 471 (1). pp. 241-246. ISSN 1660-9336

Abdullah, Lokman and Jamaludin, Zamberi and Salleh, Mohd Rizal and Abu Bakar, Baharudin and Jamaludin, Jailani and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY (2014) Theoretical Analysis of Velocity and Position Loop Behaviour of Nonlinear Cascade Feedforward Controller for Positioning of XY Table Ballscrew Drive System. Advanced Materials Research, 845. pp. 831-836. ISSN 1662-8985

Abdullah, Mohd Azman and Salim, Mohd Azli and Putra, Azma (2014) Linear And Angular Displacement Relationship Of Natural Rubber Engine Isolator. Applied Mechanics and Materials, 575 (-). pp. 250-253. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV). Applied Mechanics and Materials, 660. pp. 753-757. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV). Applied Mechanics and Materials, 663 (-). pp. 517-521. ISSN 1660-9336

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid and tamaldin, noreffendy and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Effect of hBN/Al2O3 nanoparticles on engine oil properties. Energy Education Science and Technology Part A: Energy Science and Research. pp. 3261-3268. ISSN 1308-772X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil. Jurnal Teknologi , 66 (3). pp. 1-6. ISSN 2180-3722

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles. Applied Mechanics and Materials. pp. 70-73. ISSN 1660-9336

Abdullah, N and Kasrul, Abdul Karim and Mohd Luqman, Mohd Jamil and Md Nazri, Othman (2014) Design Of Switched Reluctance Motor Using Empirical Method. INTERNATIONAL JOURNAL OF ENERGY AND POWER ENGINEERING RESEARCH, 2. pp. 6-10. ISSN 2289-5620

Abdullah, Nurfaezah and Abdul Karim, Kasrul and Raja Othman, Raja Nor Firdaus Kashfi and Mohd Jamil, Mohd Luqman and Othman, Md Nazri (2014) Design Of Switched Reluctance Motor Using Finite Element Method. Science International-Lahore, 26. pp. 1635-1638. ISSN 1013-5316

Abdullah, Raihana Syahirah and Abdollah, Mohd Faizal and Muhamad Noh, Zul Azri (2014) Enhanced P2P Botnets Detection Framework Architecture with Hybrid Analysis Approach. Journal of Information Assurance and Security, 9 (2). pp. 62-71. ISSN 1554-1010

Abdullah, Raihana Syahirah and Abu, Nor Azman and Abdollah, Mohd Faizal and Muhamad Noh, Zul Azri (2014) Understanding The Threats Of Botnets Detection : A Wide Survey. Research Journal of Information Technology, 6 (3). pp. 135-153. ISSN 1815-7432

Abdullah, Rohana and Abd Rahman, Md Nizam (2014) Work Study Architecture for Lean Waste Analysis to Achieve Optimum Man-Machine Configuration. International Journal of Basic and Applied Sciences IJBAS / IJENS, 14 (1). pp. 1-6. ISSN 2077-1223

Abu, Maisarah and Hussin, Eryana Eiyda (2014) Designing artificial magnetic conductor at 2.45 Ghz for metallic detection in RFID tag application. International Journal of Engineering and Technology (IJET), 6 (1). pp. 427-435. ISSN 0975-4024

Abu, Maisarah and Hussin, Eryana Eiyda and Othman , A.R (2014) Design of 0.92 Ghz artificial magnetic conductor for metal object detection in RFID tag application with little sensitivity to incidence of angle. Journal of Theoritical and Information Technology, 60 (2). pp. 307-313. ISSN 1992 – 8645

Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316

Abu Bakar, Norazhar (2014) A review of dissolved gas analysis measurement and interpretation techniques. IEEE Electrical Insulation Magazine. pp. 39-49. ISSN 0883-7554

Abu Bakar , Aramjat (2014) The effects of glass waste and grog on physical and mechanical properties in porcelain by powder pressing method. Masters thesis, UTeM.

Abu Samah, Khyrina Airin Fariza and Hussin, Burairah and Hasan Basari, Abd Samad (2014) A Robust System Integration for Autonomous Evacuation Navigation. 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques (SOMET_14), 265. pp. 692-702. ISSN 978-1-61499-433-6

Abu Samah, Khyrina Airin Fariza and Hussin, Burairah and Basari, A.S.H and mohd sabri, noramalina (2014) A COMPARISON STUDY ON RELIABILITY OF AUTONOMOUS EVACUATION NAVIGATION SYSTEM: EXPERIMENTAL AND MODELING SIMULATION. Sci.Int.(Lahore). pp. 1509-1514. ISSN ISSN 1013-5316; CODEN: SINTE 8

Abu Samah, Khyrina Airin Fariza and Hussin, Burairah and Hasan Basari, Abd Samad (2014) Modelling Conceptual Framework For Autonomous Intelligent Evacuation Wayfinding In Unfamiliar Building: Replacing Human With Intelligent Agent. International Conference on Applied and Theoretical Information Systems Research. pp. 1-14. ISSN NA

Affandi, Rosnani and Gan, Chin Kim and Ab Ghani, Mohd Ruddin (2014) Prospective of implementing Concentrating Solar Power (CSP) in Malaysia environment. World Applied Sciences Journal, 32 (8). pp. 1690-1697. ISSN 1818-4952

Ahamat, Amiruddin (2014) Examining How Management Research Learns From Research In Physical Sciences. Journal Of Law And Social Sciences, 4 (1). pp. 1-4. ISSN -

Ahlan, Abdul Rahman and Arshad, Yusri and Ajayi, BA (2014) IT Governance in a Malaysian Public Institute of Higher Learning and Intelligent Decision Making Support System Solution. In: Engineering and Management of IT-based Service Systems. Intelligent Systems Reference Library, 55 (55). Springer Berlin Heidelberg. ISBN 978-3-642-39927-5

Ahmad, I. and Jaafar, Azizah (2014) A case study of game design: from idea to implementation. International Journal of Interactive Digital Media, Vol. 2(1). pp. 27-29. ISSN 2289-4098

Ahmad, NurulHuda and Kamat, Seri Rahayu and Minhat, Mohamad and Bani Hashim, Ahmad Yusairi and Isa, Halim (2014) Modeling an Ergonomic Driving for In-Car Interaction: A Propose Framework. In: International Conference on Industrial Engineering and Operations Management (IEOM2014), January 7 – 9, 2014, Bali, Indonesia.

Ahmad, M.T. and Abdul Latiff, Anas and Zakaria, Zahriladha and Zen, D.I.M. (2014) Q-switched thulium-doped fiber laser operating at 1920 nm region with multiwalled carbon nanotubes embedded in polyvinyl alcohol. Microwave and Optical Technology Letters, 56 (12). pp. 2817-2819. ISSN 1098-2760

Ahmad, Maizah Hura and Pung, Yean Ping and Yazir, Siti Roslindar and Miswan, Nor Hamizah (2014) A hybrid model for improving Malaysian gold forecast accuracy. International Journal of Mathematical Analysis, 8 (28). pp. 1377-1387. ISSN 1314-7579

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Effect of activation time on the pinang frond based activated carbon for remazol brilliant blue r removal. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1085-1093. ISSN 2231-8380

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Equilibrium, kinetics, and thermodynamics of remazol brilliant blue R dye adsorption onto activated carbon prepared from pinang frond. ISRN Mechanical Engineering, 2014. pp. 1-7. ISSN 2356-7872

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza (2014) Angular Momentum of a Rotating Dipole. Journal of Telecommunication Electronic and Computer, 6. pp. 17-20. ISSN 2180-1843

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Cooray, Vernon (2014) Occurrence of Narrow Bipolar Event as Part of Cloud-to-Ground Flash in Tropical Thunderstorms. In: International Conference on Atmospheric Electricity, 15-20 June 2014, Norman, Oklahoma, USA. (In Press)

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Cooray, Vernon (2014) Similarity between the initial breakdown pulses of negative ground flash and narrow bipolar pulses. In: ICLP, 13-17 October 2014, Shanghai, China. (In Press)

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Johari, Dalina and Ismail, Mohd Muzafar and Cooray, Vernon (2014) Chaotic Pulse Train in Cloud-to-Ground and Cloud Flashes of Tropical Thunderstorms. In: ICLP, 13-17 October 2014, Shanghai, China. (In Press)

Ahmad, Nur Sumayyah and Abdullah, Abdul Rahim and Bahari, Norhazilina (2014) Open and Short Circuit Switches Fault Detection of Voltage Source Inverter Using Spectrogram. Journal of International Conference on Electrical Machines and Systems, 3 (2). pp. 190-199. ISSN 2234-6902

Ahmad, Sabrina and Kasmuri, Emaliana and Muda, Noor Azilah (2014) LEARNING THROUGH PLAYING: DEVELOPMENT OF SOFTWARE ARCHITECT’S SKILLS WITH BUILDING BLOCKS. In: 8th International Technology, Education and Development Conference , 10-12 March 2014, Valencia, Spain.

Ahmad , M. T. and Abdul Latiff, Anas and Zakaria, Zahriladha and Harun, S. W. (2014) Q-Switched Ultrafast TDLF Using MWCNTS-SA At 2 Micrometre Region. International Journal of Computer and Communication Engineering, 3 (6). pp. 446-449. ISSN 2010-3743

Ahmad Fairuz, Ahmad (2014) Simulation Of Web Performance With Different IP Environment Using Plone Software. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Izzuddin, Tarmizi and Md Sani, Zamani and Zohedi, Fauzal Naim (2014) Controller Design for Vector Controlled AC Induction Motor Drive using State-space Design Methodologies. Applied Mechanics and Materials, 529. pp. 233-238. ISSN 1660-9336

Ahmad Milad, Ali and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Mustapha, Aouache and Algaet, Mustafa Almahdi (2014) Reverse direction transmission using single data frame and multi data frames to improve the performance of mac layer based on IEEE 802.11N. Science International-Lahore. pp. 1861-1864. ISSN 1013-5316

Ahmad Nizam, Jamaludin (2014) Conceptual Design Of Wind Accelerating Device For Small VAWT. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Radzi, Syafeeza and Mohamad, Khalil-Hani and Liew, Shan Sung and Bakhteri, Rabia (2014) Convolutional Neural Network for Face Recognition with Pose and Illumination Variation. International Journal of Engineering and Technology (IJET), 6 (1). pp. 44-57. ISSN 0975-4024

Ahmad Rizal , Ammar Redza and Md Nordin, Shahrina and Md Saad, Mohd Shamsuri and Wahab, Hasnida (2014) Inter-Organization Communication Management between Organizations in a Subsidized Fertilizer Market in Malaysia. Global Business and Management Research: An International Journal, 6 (3). pp. 229-236. ISSN ISSN: 1947-5667

Ahmad Sharawardi, N.S. and Choo, Yun-Huoy and Chong, Shin Horng and Muda, Azah Kamilah and Goh, Ong Sing (2014) Single Channel sEMG Muscle Fatigue Prediction An Implementation Using Least Square Support Vector Machine. In: WICT'14, 8-10 December 2014, Melaka. (In Press)

Ahmad Zaifazlin , Zainordin (2014) Characterization of magnetorheological brake for speed control application. Masters thesis, UTeM.

Ahmed, Abu-Khadrah and Zakaria, Zahriladha and Othman, Mohd Azlishah (2014) New Technique To Enhance Quality Of Service Support For Real Time Applications In EDCA Protocol. International Review on Computers and Software (IRECOS) , 9 (3). pp. 1-3. ISSN 1828-6003

Ahmed Amin, Maarof Al-Janad (2014) Analyzing Performance Of Super-Capacitor And Battery In Low Voltage Electrical Distribution Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmed Dawod, Salman (2014) Cloud Computing For Iraqi Ministry Of Finance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahya Ilmudin, Mohamad Hakim and Hashim, Nik Mohd Zarifie and Ja'afar, Abd Shukur and Salleh, Azahari and Jaafar, Anuar and Mohd Sam, Mohd Fazli (2014) Traffic Light Control System Using 434 Mhz Radio Frequency. International Journal of Research in Advent Technology, 2 (8). pp. 26-31. ISSN 2321-9637

Aida Fazliana, Abdul Kadir (2014) Harmonic Impact Of Inverter Based Distributed Generation And Optimal Harmonic Control Using Improved Gravitational Search Algorithm. PhD thesis, Universiti Teknikal Malaysia Melaka.

Aiza Syahida , Zakaria (2014) Cancer patient's record queries using answer on-demand data sharing architecture. Masters thesis, UTeM.

Akiah, Masni-Azian and Abdul Hamid, Rahimah and Othman, Mohd Shahrizan (2014) Towards OBE: A Case Study of Course Outcome (CO) and Programme Outcome (PO) Attainment for Product Design and Development Course. IOSR Journal of Research & Method in Education (IOSR-JRME) , 4 (2). pp. 55-61. ISSN 2320–7388

Akmal, Suriati (2014) Ontology-based similarity for product information retrieval. Computers in Industry, 65. pp. 91-107. ISSN 0166-3615

Al , Munawir (2014) A corrected model of statistical energy analysis (SEA) in a non-reverberant acoustic space. Masters thesis, UTeM.

Al Amin, Mohamed Sultan and Isa , Halim and Nor Akramin, Mohamad and Febrian, Idral and Taufik, , (2014) Development of Questionnaire for Assistive Device Design in LPG Cylinder Handling. Applied Mechanics and Materials. pp. 1160-1164. ISSN 1660-9336

Al Amin, Mohammed Sultan and Isa, Halim (2014) Application of quality function deployment to design a liquefied petroleum gas trolley. Applied Mechanics and Materials, 761 (-). pp. 698-702. ISSN 1662-7482

Al-Amani, Umar and F.H. , Wee and F., Malek and Farid, Ghani (2014) Effect of Two Different Superstrate Layers on Bismuth titanate (BiT) array antennas. Scientific Reports. pp. 1-8. ISSN 10.1038/srep03709

Ali, Mohd Basri and Abdullah, Shahrum (2014) Evaluating instrumented Charpy impact strain signals using curve fitting equations. Journal Central South University, 21 (DOI: 10.1007/s11771-014-1979-3). pp. 600-6009. ISSN 2227-5223

Ali, Fara Ashikin and Mohd Aras, Mohd Shahrieel and Ab Azis, Fadilah and Sulaima, Mohamad Fani and Jaafar, Ismail (2014) Design And Development Of Auto Depth Control Of Remotely Operated Vehicle Using Thrusters System. Journal of Mechanical Engineering and Sciences (JMES). pp. 1141-1149. ISSN 2289-4659

Ali, Mohd Basri and Abdullah, Shahrum and Nuawi, Mohd Zaki and M. Nopiah, Z. (2014) Evaluating Instrumented Charpy Impact Strain Signals Using Curve Fitting Equations. Journal Central South University, 21 (2). pp. 600-609. ISSN 2227-5223

Ali, Mohd Basri and Abdullah, Shahrum (2014) Mathematical correlation for the strain signal energy characteristics obtained from instrumented charpy impact test. Pensee Journal, 76 (5). pp. 369-377. ISSN 0031-4773

Ali Mokhtar, Mohd Najib and Wong, Kian Loon and Saleman, Abdul Rafeq and Bani Hashim, Ahmad Yusairi and Jafar, Fairul Azni and Zakaria, Muhammad Zulfattah (2014) Synthesis Of Four Bar Slider Mechanism For Finitely Three Separated Positions. Advanced Materials Research, 903 (-). pp. 221-226. ISSN 1662-8985

Alias, Shazwani and Abal Abas, Zuraida and Shibghatullah, Abdul Samad and Abdul Rahman, Ahmad Fadzli Nizam (2014) A brief review of surface meshing in medical images for biomedical computing and visualization. Science International-Lahore. pp. 1741-1744. ISSN 1013-5316

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Consolidation Characteristics Of Ferrous-Based Metal Powder In Additive Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 8 (1). pp. 1-16. ISSN 1881-3054

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Melt Pool And Single Track Formation In Selective Laser Sintering Selective Laser Melting. Advanced Materials Research, 933 (-). pp. 196-201. ISSN 1662-8985

Aminuddin, M.M.M (2014) The correlation salinity and electric voltage. International Symposium on Tecnology Management And Imerging Technology. pp. 458-461. ISSN 978-1-4799-3704

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and tamaldin, noreffendy (2014) Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.

Anantharao , Supramaniam (2014) Implementation of online monitoring system to determine overall equipment effectiveness. Masters thesis, UTeM.

Ang, TeohOng and Ibrahim, Zulkifilie and Ramli, Suzaimah (2014) Computer Machine Vision Inspection On Printed Circuit Boards Flux Defects. American Journal of Engineering and Applied Sciences, 6 (3). pp. 263-273. ISSN 1941-7020

Anuar Mohamed Kassim (2014) Vehicle Security System And A Method Therefor. IP 2014703498.

Anuar , Mohamed Kassim and Jamri , Mohd Saifuzam and Othman, Md Nazri and Jaafar, Hazriq Izzuan (2014) Evaluation of energy efficiency for Residential New Construction (RNC) single storey terrace house. Applied Mechanics and Materials. pp. 877-882. ISSN 1660-9336

Anuar , Mohamed Kassim and Takashi , Yasuno and Shukor, Ahmad Zaki and Chan, Xin Zhi and Jo Jo Sam, Wai Lun (2014) Blind navigation system by using RFID and digital compass technology. In: The Society of Instrument and Control Shikoku Branch Conference 2014, 28 Nov 2014, Ehime, Japan.

Aravind, Chockalingam and I, Khumaira and Raja Othman, Raja Nor Firdaus Kashfi and Abdul Shukor, Fairul Azhar (2014) Single phase flux switching DC linear actuator. Journal of Engineering Science and Technology EURECA, Special Issue. pp. 28-39. ISSN 1823-4690

Ardiansa , Rachmawan (2014) Developing secure android application with encrypted database file using sqlcipher. Masters thesis, UTeM.

Arif, Sazelin and Hassan, Muhammad Haziq and Sidek, Safiah (2014) Compliance With The Internal Halal Assurance System Among Food Service Operators In Melaka. Sci Int (Lahore), 26. pp. 1553-1556. ISSN 1013-5316

Arith, Faiz and Sharafina, Anis and M. Said, Muzalifah and Idris, M. Idzdihar (2014) Low Cost Electro-deposition of Cuprous Oxide P-N Homo-junction Solar Cell. Advanced Materials Research, 827. pp. 38-43. ISSN 1662-8985

Arith, Faiz and Amin, Nowshad and Chelvanathan, Puvaneswaran and Idris, Idzdihar (2014) Prospects of molybdenum thin film for solar cell application from AFM analysis. Australian Journal of Basic and Applied Sciences, 8 (2). pp. 87-92. ISSN 1991-8178

Arith, Faiz and Mustafa, Ahmad Nizamuddin and Idris, Idzdihar and Abdul Latiff, Anas and Toshio, Katsuyama (2014) Effects of exciton-polariton on Mach-Zehnder interference devices. Research Journal of Applied Sciences, Engineering and Technology, 7 (15). pp. 3044-3048. ISSN 2040-7459

Arshad, Yusri and Abdul Rahman, Ahlan and Ajayi, BA (2014) Intelligent IT governance decision-making support framework for a developing country's public university. Intelligent Decision Technologies. pp. 131-146. ISSN 1872-4981 (Print)

Arshad, Yusri and Ahlan, Abdul Rahman and Ajayi, B. A. (2014) Intelligent IT Governance Decision Making Support Framework For A Developing Countrys Public University. Intelligent Decision Technologies, 8 (-). pp. 131-146. ISSN 1872-4981

Ashafi'e, Mustafa and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Umehara, Noritsugu (2014) Pre-Materials Selection for Eco-Aware Lightweight Friction Material. In: 9th International Materials Technology Conference and Exhibition, 13 - 16 May 2014, Kuala Lumpur.

Asih, , Hayati Mukti and Chong, Kuan Eng (2014) Throughput and Tester Utilization Improvement in the Hard Disk Drive Assembly Line using Hybrid Simulation Approach. Advanced Science Letters, 20 (2). pp. 455-459. ISSN 1936-6612

Aslinda, Hassan (2014) Analytical investigation and implementation of carry and forward based routing protocol for vehicular ad hoc network. PhD thesis, UTeM.

Asmai, S. A. (2014) Enhancing predictive crime mapping model using association rule mining for geographical and demographic structure. In: ISORIS, 15 October 2014, UTeM. (Submitted)

Asmai, S. A. and Burairah, Hussin and Mohd. Yusof, Mokhtar and Shibghatullah, Abdul Samad (2014) Time series prediction techniques for estimating remaining useful lifetime of cutting tool failure. International Review on Computers and Software (IRECOS) . pp. 1783-1790. ISSN 1828-6003

Asmai, S. A. (2014) Alert calibration maintenance (AlertCaLM) application for condition based maintenance. In: ISORIS, 15 October 2014, UTeM. (Submitted)

Asmai, S. A. and Rosmiza Wahida, Abdullah and Sabrina, Ahmad (2014) Predictive crime mapping model using association rule mining for crime analysis. Science International-Lahore. pp. 1703-1708. ISSN 1013-5316

Asmala, A. (2014) Multitemporal Cloud Detection and Masking Using MODIS Data. Applied Mathematical Sciences, 8 (7). pp. 345-353. ISSN 1312-885X

Asmala, A. and Abd Ghani, M. K. and Sazalinsyah, Razali (2014) Haze Reduction from Remotely Sensed Data. Applied Mathematical Sciences, 8 (36). pp. 1755-1762. ISSN 1312-885X

Asmala, A. and Abd Rahman, Mat Amin and Fadhli , Ahmad and Mustafa, Mamat and Khiruddin, Abdullah (2014) A Comparison between Ratio and Gradient Technique in Discriminating Cirrus Clouds from Tropospheric Aerosols over Water in MODIS Data. Applied Mathematical Sciences, 8 (124). pp. 6151-6158. ISSN 1312-885X

Asmala, A. and Abd Rahman, Mat Amin and Fadhli , Ahmad and Mustafa, Mamat and Khiruddin, Abdullah (2014) Euphotic Depth Zone Variation in Peninsular Malaysia Maritime. Applied Mathematical Sciences, 8 (68). pp. 3375-3383. ISSN 1312-885X

Asmala, A. and Burhanuddin , Mohd Aboobaider and Mohamad Isa, Mohd Sa'ari and Noorazuan, M. H. and Mochamad , Rosul and Sulong , Muhamad and Shamsuddin , Man (2014) Temporal Changes in Urban Green Space based on Normalized Difference Vegetation Index. Applied Mathematical Sciences, 8 (55). 2743-2751 . ISSN 1312-885X

Asmala, A. and Shaun, Quegan (2014) The Effects of Haze on the Spectral and Statistical Properties of Land Cover Classification. Applied Mathematical Sciences, 8 (180). pp. 9001-9013. ISSN 1312-885X

Asmala, A. and Shaun, Quegan (2014) Haze Modelling and Simulation in Remote Sensing Satellite Data. Applied Mathematical Sciences, 8 (159). pp. 7909-7921. ISSN 1312-885X

Asreen Anuar , Abd Aziz (2014) RF receiver design using the direct conversion approach at 5.8 GHz band based on IEEE 802.11a standard. Masters thesis, UTeM.

Awang Md Isa, Azmi and Haron, Nor Zaidi and Mohamad Isa, Mohd Sa'ari and Mohd Zin, Mohd Shahril Izuan and Zakaria, Zahriladha (2014) Combined TOA/DOA for location estimation in MIMO system. Jurnal Teknologi , 68 (3). pp. 81-87. ISSN E-ISSN 2180-3722

Awang Md Isa, Azmi and Mohd Zin, Mohd Shahril Izuan and Mohamad Isa, Mohd Sa'ari and Md Saat, Mohd Shakir and Haron, Nor Zaidi and Zakaria, Zahriladha (2014) Improved location and positioning in WiMAX networks with virtual MIMO base stations. Advanced Science Letters, 20 (10). pp. 1846-1850. ISSN 1936-6612

Awang Musa, Syarmeela Hadzwina and Abdullah, Abdul Rahim and Gan, Chin Kim and Rahim, Nor Hidayah (2014) Performance Evaluation of DC Microgrid System for Residential LED Lighting Application. International Review of Electrical Engineering (I.R.E.E.), 9 (3). pp. 648-654. ISSN 1827-6660

Ayman , N. Majed (2014) WiMAX architecture for Iraq environment : mosul case study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ayop, Zakiah and Mustafa, Nuridawati and Chang, Jonathan and Wong, Boon Min and Zainal Abidin, Zaheera and Lim, Jie hui and Anawar, Syarulnaziah (2014) Automation-testing for monitoring the network health of manufacturing web-based application. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Ayop, Zakiah and Zainal Abidin, Zaheera and Anawar, Syarulnaziah and Mohd Shuhaimi, Mohammad Ali Arsyad (2014) Monitoring Network And Service:A New Nagios Services Using Smart Notification Management. Journal Of Information Assurance And Security, 9. 043-050. ISSN 1554-1010

Azah Kamilah, Muda and Yun-Huoy, C. and Abraham, Ajith and Srihari, Sargur N. (2014) Computational Intelligence In Digital Forensics: Forensic Investigation And Applications. Springer, Heiddelberg, New York. ISBN 9783319058849

Azhar, Sulaiman (2014) Performance Analysis In Material Selection For Surface Insulation Condition Of High Voltage Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhari, Muhamad Azwar and Omar, Nooririnah and Mustaffa , Nuzaimah (2014) Carbon Dioxide Permeation Characteristics in Asymmetric Polysulfone Hollow Fiber Membrane: Effect of Constant Heating and Progressive Heating. Advanced Materials Research Journal, 896. pp. 37-40. ISSN 10.4028

Azhari, Muhamad Azwar and Suffian, Quratul Nadia and Mat Nuri @ Md Din, Nur Rashid (2014) The Effect Of Zinc Dialkyldithiophosphate Addition To Corn Oil In Suppression Of Oxidation As Enhancement For Bio Lubricants : A Review. Journal Of Engineering And Applied Sciences, 9 (9). pp. 1447-1449. ISSN 1819-6608

Aziah , Khamis (2014) Islanding detection and classification and load shedding scheme for dispersed generation integrated radial distribution systems. PhD thesis, UTeM.

Aziz Hussein, Sadiq and S., Thiru and Izamshah, Raja and Md Tahir, Abd Salam (2014) Unstable Temperature Distribution in Friction Stir Welding. Advances in Materials Science and Engineering, 2014 (2014). p. 8. ISSN 1687-8434

Azizah Shaaban (2014) Nitrogeneous Compound Fertilizer. PI 2014703289.

Azizah, Shaaban and Sian Meng, Se and Dimin, MohdFairuz and Jariah , Mohamad Juoi and Mohd Haizal , Mohd Husin and Nona Merry, M. Mitan (2014) Influence of Heating Temperature and Holding Time on Biochars Derived from Rubber Wood Sawdust via Slow Pyrolysis. Journal of Analytical and Applied Pyrolysis. pp. 1-8. ISSN 0165-2370 (In Press)

Azma, Putra and Khalis, Suhaimi and Roszaidi, Ramlan (2014) A Combined Softening and Hardening Mechanism for Low Frequency Human Motion Energy Harvesting Application. Advances in Acoustics and Vibration. pp. 1-13. ISSN 1687-627X

Azma, Putra and Wong, Hee Kiong and Nawal Aswan, Abdul Jalil (2014) Measurement Of Structure-Borne Noise From Road Input In A Motor Vehicle Cabin. Asean Engineering Journal, 4 (2). pp. 29-41. ISSN 2229-127X

Azma , Putra and Md Rejab, Mohd Noor Arib and Abd Rahman, Roslan and Raja Hamzah, Raja Ishak and Jawaid Iqbal, Inayat-Hussain and Ahmad , Nazirah and Ismail , Asyraf (2014) Using Transmissibility And Vibration Power Flow Methods To Evaluate The Effectiveness Of Elastomeric Mounts For Vibration And Noise Control. Proceedings of the 21st International Congress on Sound & Vibration (ICSV 21) 2014. pp. 1-8. ISSN 2329-3675

Azni Haslizan , Ab Halim (2014) Correlated survivability analysis model for manets. PhD thesis, UTeM.

Aznizam , Abdullah (2014) Design and finite element analysis of interference press-fit aluminium nut. Masters thesis, UTeM.

Azri, Maaspaliza and Abd.Rahim, Nasrudin (2014) Transformerless Power Converter For Grid-Connected PV System With No-Ripple Input Current And Low Ground-Leakage Current. International Conference on Clean Energy and Technology, -. pp. 1-6. ISSN -

Azri, Maaspaliza and Abdul Rahim, Nasruddin and Mohamad Elias, Mohamad Fathi (2014) Transformerless DC/AC Converter For Grid-Connected PV Power Generation System. Arabian Journal for Science and Engineering, 39. pp. 7945-7956. ISSN 1319-8025

Azrin , Tahrel (2014) Evaluation of ceramic lab facalities layout design of KKTM Masjid Tanah using SLP method. Masters thesis, UTeM.

abdullah, abdul rahim and goh, zai peng and Ab Ghani, Sharin and JOPRI, MOHD HATTA (2014) A new vector draft method for harmonic source detection at point of common coupling. In: Power Engineering and Optimization Conference (PEOCO), 2014 IEEE 8th International, 24-25 March 2014, Langkawi,kedah.

abidullah, Noor Athira and Abdullah, Abdul Rahim and Sha'ameri, Ahmad Zuri and Shamsudin, Nur Hazahsha and ahmad, Nur Hafizatul Tul Huda and JOPRI, MOHD HATTA (2014) Real-Time Power Quality Disturbances Detection and Classification System. World Applied Sciences Journal (WASJ), 32 (8). pp. 1637-1651. ISSN 18184952

abu hassan, mohd arif and Abdullah, Abdul Rahim and Bahari, Norhazilina (2014) Speed Control Analysis of Brushless DC Motor Based on Maximum Amplitude DC Current Feedback. MATEC Web of Conferences, 13. 03007p1-03007p6. ISSN 2261-236X

ahmad, nur sumayyah and Abdullah, Abdul Rahim and Bahari, Norhazilina and abu hassan, mohd arif (2014) Switched Faults Analysis of Voltage Source Inverter (VSI) using Short Time Fourier Transform (STFT). International Review of Modelling and Simulations (I.RE.MO.S), 7 (3). pp. 409-415. ISSN 1974-9821

ahmad, nur sumayyah and Abdullah, Abdul Rahim and abidullah, Noor Athira and JOPRI, MOHD HATTA (2014) Analysis of power quality disturbances using spectrogram and S-Transform. International Review of Electrical Engineering (I.R.E.E.), 9 (3). pp. 611-619. ISSN 1827-6660

B

Bahaman, Nazrulazhar and Anton Satria, Prabuwono and Zakaria, Nurul Azma (2014) Neighbor Discovery Message as Threats on 6to4 Tunneling. Research Journal of Information Technology, 6 (3). pp. 198-206. ISSN 1815-7432

Bahar, Mohd Bazli and Miskon, Muhammad Fahmi and Abu Bakar, Norazhar and Ali @ Ibrahim, Fariz and Shukor, Ahmad Zaki (2014) STS Motion Control Using Humanoid Robot. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 95-108. ISSN 2040-7459

Bahar, Mohd Bazli and Miskon, Muhammad Fahmi and Abu Bakar, Norazhar and Ali @ Ibrahim, Fariz and Shukor, Ahmad Zaki (2014) STS Motion Control Using Humanoid Robot. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 95-108. ISSN 2040-7459

Baharom, Mohamad Faizal and Jali, Mohd Hafiz and Wan Daud, Wan Mohd Bukhari and Bohari, Zul Hasrizal and Mohd Nasir, Mohamad Na'im (2014) Multi population evolutionary programming approach for distributed generation installation. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (3). pp. 541-548. ISSN 1693-6930

Bani Hashim, Ahmad Yusairi and Maslan, Mohd Nazmin and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Imran Syakir (2014) Delivering key signals to the machine: seeking the electric signal that muscles emanate. Journal of Physics Conference Series, 546. pp. 1-9. ISSN 1742-6596

Basar, Mohd Farriz and M. R., Sapiee and Rahman, Syukri and Hamdan, Zulfiqah and Borhan, Shuhada and Sopian, Kamaruzzaman (2014) Cost Analysis of Pico hydro Turbine for Power Production. AENSI Advances in Environmental Biology, 8 (14). pp. 147-151. ISSN ISSN-1995-0756

Basari, A. S. H. and Yusop, Noorezam and Hussin, Burairah and Shibghatullah, Abdul Samad (2014) Hybrid of Boyer Moore and rule based system for mobile library book information. International Journal of Computer Applications , 90 (5). pp. 21-28. ISSN 0975-8887

Basari, A.S.H and Razali, H and Hussin, Burairah and Asmai, S. A. and Ibrahim, N. K. and Shibghatullah, Abdul Samad (2014) Markovian Approach Enhancement to Simplify Optimal Mean Estimation. Applied Mathematical Sciences, Vol. 8 (no. 11). pp. 5507-5516. ISSN 1314-7552

Basari, Amat Amir and Sosuke, Awaji and Song, Wang and Seiji, Hashimoto and Shunji , Kumagai and Kenji, Suto and Hiroaki, Okada and Hideki, Okuno and Bunji, Homma and Wei, Jiang and Shuren, Wang (2014) Shape Effect of Piezoelectric Energy Harvester on Vibration Power Generation. Journal of Power and Energy Engineering, 2014 (2). pp. 117-124. ISSN 2327-5901

Basem Yousef Mofadi, Zughoul (2014) Generic software development framework for enterprise resource planning system development. PhD thesis, UTeM.

Bilge, Pinar and Abdul Rahman, Azrul Azwan (2014) A case study material flow simulation based analysis for maintenance network improvement. Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 1985-3157 July-December 2008

Bistamam, Mohd Shahril Amin and Mohd Abid, Mohd Asyadi Azam (2014) Tip-growth of aligned carbon nanotubes on cobalt catalyst supported by alumina using alcohol catalytic chemical vapor deposition. Results in Physics, 4. pp. 105-106. ISSN 2211-3797

Bohari, Zul Hasrizal and Ab Ghani, Sharin and Baharom, Mohamad Faizal and Mohd Nasir, Mohamad Na'im and Jali, Mohd Hafiz (2014) Feature Analysis of Numerical Calculated Data from Sweep Frequency Analysis (SFRA) Traces Using Self Organizing Maps. Jurnal Teknologi . pp. 37-42. ISSN 2180-3722

Bohari, Zul Hasrizal and Ab Ghani, Sharin and Baharom, Mohamad Faizal and Mohd Nasir, Mohamad Na'im and Jali, Mohd Hafiz and Y. H., Md Thayoob (2014) Feature Analysis Of Numerical Calculated Data From Sweep Frequency Analysis (Sfra) Traces Using Self Organizing Maps. Jurnal Teknologi, 67. pp. 37-42. ISSN E-ISSN2180-3722 (Submitted)

Bohari, Zul Hasrizal and Jali, Mohd Hafiz and Baharom, Mohamad Faizal and Mohd Nasir, Mohamad Na'im and Jaafar, Hazriq Izzuan and Wan Daud, Wan Mohd Bukhari (2014) EMG signal statistical features extraction combination performance benchmark using unsupervised neural network for arm rehab device. International Journal of Applied Engineering Research, 9 (22). pp. 12393-12402. ISSN 0973-4562

Bohari, Zul Hasrizal and Sulaima, Mohamad Fani and Mohd Nasir, Mohamad Na'im and Wan Daud, Wan Mohd Bukhari and Jali, Mohd Hafiz and Baharom, Mohamad Faizal (2014) A Novel Electromagnetic Field Detector for Extremely Low Frequency Energy. The International Journal of Engineering And Science, 3 (6). pp. 59-67. ISSN 2319 – 1813

Budi, Mulyanti and Menon, P.S and Sahbudin, Saari and L, Hasanah and Haroon, Hazura and A.A, Ehsan and D, Mahmudin and G., Wiranto and Majlis, B.Y (2014) Design and Optimization of Coupled Microring Resonators (MRRs) in Silicon-on-Insulator. Sains Malaysiana, 43 (2). pp. 247-252. ISSN 0126-6039

C

Che Amran , Aliza and Fen , Ying Chin and Md Ghazaly, Mariam and Chong, Shin Horng (2014) Development of Passive Quarter Car Suspension Prototype. In: International Conference on Design and Concurrent Engineeting (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.

Che Amran , Aliza and Fen , Ying Chin and Md Ghazaly, Mariam and Chong, Shin Horng (2014) Development of Passive Quarter Car Suspension Prototype. Applied Mechanics and Materials, . pp. 1-6. ISSN Trans Tech Publications Inc.

Che Hasan, Mohd Hanif and Md Sam, Yahaya and Kemao , Peng and Aripin, Muhamad Khairi and Ismail, Muhamad Fahezal (2014) Composite Nonlinear Feedback for Vehicle Active Front Steering. Applied Mechanics and Materials, 667. pp. 127-134. ISSN 16609336, 16627482

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah (2014) Development of Personalized Learning Environment (PLE) for Malaysian School Environment Based on ADDIE Model. INTERNATION JOURNAL OF COMPUTERS AND TECHNOLOGY, 13 (7). 4683 |-4687. ISSN 2277-3061

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah (2014) Learning Approach for Personalized Learning Environment (PLE): Preliminary Analysis. Information and Communication Technology for Education, 58 (1). pp. 389-396. ISSN 978-1-84564-975-3

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Naim Che Pee , Che Hanapi (2014) Personalized Learning Environment (PLE): Developing a Framework using ADDIE Approach. Journal of Applied Science and Agriculture, 9 (11). pp. 28-32. ISSN 1816-9112

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Naim Che Pee, Che Hanapi (2014) Exploring the Potential Technology in Personalized Learning Environment (PLE). Journal of Applied Science and Agriculture, 9 (18). pp. 61-65. ISSN 1816-9112

Chee Mun , Wai (2014) Modeling and analysis of composite hinge for aircraft spoiler using finite element analysis. Masters thesis, UTeM.

Chin, Sze Mei and Sufian, Suriati and ABD RAZAK , JEEFFERIE (2014) Synthesis and Characterization of Hematite Nanoparticles as Active Photocatalyst for Water Splitting Application. Key Engineering Materials, 594-595. pp. 73-77. ISSN 1013-9826 (In Press)

Chong, Shin Horng and Sato, Kaiji (2014) Practical and robust control for precision motion: AR-CM NCTF control of a linear motion mechanism with friction characteristics. IET Control Theory and Applications, 9 (5). pp. 745-754. ISSN 1751-8644

Chong, Shin Horng and Ting , Tze Ter and Sakthivelu, Vasanthan (2014) Positioning control of a ball screw system driven by DC motor. Applied Mechanics and Materials. pp. 12-17. ISSN 1660-9336 (In Press)

Chong , Shin Horng and Hee, Wai Keat and Sato, Kaiji (2014) Positioning control of an X-Y table based on practical NCTF control. In: The 12th International Conference on Motion and Vibration (MoViC), 3-7, August 2014, Sapporo, Hokaiddo, Japan.

Chow , Deborah Yen May (2014) Modelling and simulation for logistic service company : case study on customer service operation. Masters thesis, UTeM.

Chua, K.W. and Abdollah, Mohd Fadzli bin and Mat Tahir, Noor Ayuma and Amiruddin, Hilmi (2014) Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: Effect of load on friction and wear properties. Jurnal Tribologi, 2. pp. 31-38. ISSN 2289-7232

D

Danang Wahyu, Utomo (2014) Tool Enhancement For Collaborative Software Engineering Education. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dg Hafizah, Kassim and Azma, Putra and Mohd Jailani, Mohd Nor and Noryani, Muhammad (2014) Effect Of Pyramidal Dome Geometry On The Acoustical Characteristics In A Mosque. Journal of Mechanical Engineering and Sciences (JMES), 7. pp. 1127-1133. ISSN 2289-4659

Dimin, Mohd Fairuz and Sian Meng, Se and Azizah, Shaaban and Hashim, Mohammad Muaz (2014) Urea impregnated biochar to minimize nutrients loss in paddy soils. International Journal of Automotive and Mechanical Engineering (IJAME), 10. pp. 2016-2024. ISSN 2229-8649

Dimin @ Mohd Amin, Mohd Fairuz and Subramonian, Sivarao A/L and Faris , N.M.F. and Hambali, Arep @ Ariff and Dhar Malingam, Sivakumar A/L and Salit, Mohd Sapuan (2014) Analytical Hierarchy Process For Design Selection Of Micro Hot-Marking Tool. Applied Mechanics and Materials, 699. pp. 897-902. ISSN 1660-9336

Din, Abdul Talib and V.K., Kher and Chee, Fai Tan (2014) An Innovative Method Of Harnessing Hydraulic Energy For Mini Cost-Saving Water Treatment Plnat Using Hydraulic Turbine : A Mathematical Approach Towards Design And Analysis. Applied Mechanics and Materials, 752-75. pp. 833-838. ISSN 1660-9336

Din, Abdul Talib and Vee Kiat, Kher and Chee Fai, Tan (2014) Conceptual Design Of Mini Cost-Saving Water Treatment Plant For River Inlets. Applied Mechanics and Materials, 521. pp. 762-774. ISSN 1660-9336 (in acceptance letter and journal proceeding)

E

Ebrahim Mohammed , Abdo Alrawhani (2014) Real estate recommender systems using case-base reasoning approach. Masters thesis, UTeM.

Edynoor , Osman (2014) Hygrothermal effect on hybrid composite by using filement winding process. Masters thesis, UTeM.

Egia Rosi, Subhiyakto (2014) Customization Of Requirements Modeling Tool For Software Engineering Education. Masters thesis, Universiti Teknikal Malaysia Melaka.

Elzamly, Abdelrafe and Hussin, Burairah (2014) An Enhancement Of Framework Software Risk Management Methodology For Successful Software Development. Journal of Theoretical and Applied Information Technology, 62 (2). pp. 410-423. ISSN 1992-8645

Elzamly, Abdelrafe and Hussin, Burairah (2014) Evaluation Of Quantitative And Mining Techniques For Reducing Software Maintenance Risks. Applied Mathematical Sciences, 8 (-). pp. 5533-5542. ISSN 1312-885X

Elzamly, Abdelrafe and Hussin, Burairah (2014) Identifying And Managing Software Project Risks With Proposed Fuzzy Regression Analysis Techniques : Maintenance Phase. 2014 Conference On Management And Engineering (CME 2014), - (-). pp. 1-12. ISSN -

Elzamly, Abdelrafe and Hussin, Burairah (2014) Managing Software Project Risks (Planning Phase) With Proposed Fuzzy Regression Analysis Techniques With Fuzzy Concepts. International Journal of Information and Computer Science (IJICS), 3 (2). pp. 31-40. ISSN 2161-6450

Elzamly, Abdelrafe and Hussin, Burairah (2014) Mitigating Software Maintenance Project Risks With Stepwise Regression Analysis Techniques. Journal of Modern Mathematics Frontier, 3 (2). pp. 34-44. ISSN 2227-3743

Elzamly, Abdelrafe and Hussin, Burairah (2014) Modelling And Mitigating Software Implementation Project Risks With Proposed Mining Technique. Information Engineering (IE), 3 (-). pp. 39-48. ISSN 2326-585X

Emhammed, Misbah Abdelsalam Misbah and Ho, Yih Hwa (2014) Optimization Handover Procedure in IEEE 802.16E Network. International Journal of Scientific & Engineering Research. pp. 803-809. ISSN 2229-5518

Essam Mutahar , Ahmed Alsoudi (2014) Enhancement of QoS in voice-enabled networks using combination of MPLS and DiffServ. Masters thesis, UTeM.

Eswari Devi , Ramachandran (2014) Productivity improvement : preventive actions for hard defect failure reduction at hard disk drive assembly process. Masters thesis, UTeM.

F

Fadilah, Suri Iryani and Shibghatullah, Abdul Samad and Abal Abas, Zuraida and Abd Wahab, Mohd Helmy and Hashim, Wan Nur Wahidah (2014) Performance analysis for wireless G (IEEE 802.11G) and wireless N (IEEE 802.11N) in outdoor environment. In: CCE2014, 24-25 June 2014, Politeknik Seberang Perai, Penang .

Fadilah, Suzi Iryanti and Shibghatullah, Abdul Samad and Abal Abas, Zuraida and Abd Wahab, Mohd Helmy and Hashim, Wan Nur Wahidah (2014) Performance Analysis For Wireless G (IEEE 802.11 G) And Wireless N (IEEE 802.11 N) In Outdoor Environment. ARPN Journal Of Engineering And Applied Sciences, 9 (10). pp. 1725-1731. ISSN 1819-6608

Fairus , Abu and Ahmad Rozelan, Yunus and Izaidin, Abdul Majid and Juhaini, Jabar and Amir, Aris and Hamzah , Sakidin (2014) Empowering smart customer to participate in electricity supply system: Extended of technology acceptance model. Journal of Technology Management and Technopreneurship. pp. 85-94. ISSN 2231-7996 (In Press)

Farah Nazmin, Kamarudin (2014) 3D audio visual courseware requirements for training self-care skills for children with autism. Masters thesis, UTeM.

Fatihah Ros , Ahmad and Seri Rahayu , Kamat and Ahmad Yusairi, Bani Hashim (2014) Fatigue on upper quadrant human body: the psychophysical experience among drivers. In: International Con Current Design and Engineering (iDECON 2014), 20 and 21 Sepetmebr 2014, Melaka.

Ferda, Ernawan and Nor Azman, Abu and Nanna Suryana, Herman (2014) An Adaptive JPEG Image Compression Using Psychovisual Model. Advanced Science Letters, 20. pp. 26-31. ISSN 1936-6612

Ferda, Ernawan and Nur Azman, Abu and Nanna Suryana, Herman (2014) A Psychovisual Threshold For Generating Quantization Process In Tchebichef Moment Image Compression. Journal Of Computers, 9 (3). pp. 702-710. ISSN 1796-203X

Ferda, Ernawan and Nur Azman , Abu and Nanna Suryana, Herman (2014) An Optimal Tchebichef Moment Quantization Using Psychovisual Threshold For Image Compression. Advanced Science Letters, 20. 070-074. ISSN 1936-6612

Ferda , Ernawan (2014) An efficient psychovisual threshold technique in image compression. PhD thesis, UTeM.

Fevilia Nurnadia , Adria Syaifoel (2014) Structural model of customer satisfaction using the integration of kansei engineering and kano method. Masters thesis, UTeM.

Fizatul Aini , Patakor (2014) State-dependent sliding mode control for three-phase induction motor drives. PhD thesis, UTeM.

Foo , Chi Huie (2014) DMAIC method application top reduce contamination in hard disk drive. Masters thesis, UTeM.

G

Gan, Chin Kim and Ab Ghani, Mohd Ruddin and Ibraheem, Wadhah Esmaeel (2014) Impact of Photovoltaic (PV) Systems on Distribution Networks. International Review on Modelling & Simulations, 7 (2). pp. 298-310. ISSN 1974-9821

Gan, Chin Kim and Lau, Cheiw Yun and Tan, Pi Hua (2014) Evaluation Of Solar Photovoltaic Levelized Cost Of Energy For PV Grid Parity Analysis In Malaysia. International Journal of Renewable Energy Resources, 4 (1). pp. 28-34. ISSN 2289-1846

Gan, Chin Kim and Wirun, Prayun and Tan, Chee Wei and Meysam, Shamshiri (2014) Design Of A Hybrid Diesel/PV/Wind/Battery System In Remote Areas. International Review Of Electrical Engineering (IREE), 9 (2). pp. 420-430. ISSN 1827- 6660

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Suaidi, Mohamad Kadim (2014) Alleviate exposed node issues in Wireless Mesh Network (WMN) using a novel approach of Concurrent Medium Access Control (C-MAC) protocol. International Journal of Research in Engineering and Technology (IJRET), 03 (11). pp. 551-556. ISSN E-ISSN: 2319-1163, ISSN: 2321-7308

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Jalaudin, Nur Qalbi (2014) A review on various types of Software Defined Radios (SDRs) in radio communication. International Journal of Research in Engineering and Technology (IJRET), 3 (12). pp. 203-209. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Ghani, O. A. A. and Kamaruzaman, M. Z. and Sulaima, Mohamad Fani and Othman, Md Nazri (2014) An Engineering Ethics Case Study Review: Petrobras P-36 Accident. The International Journal of Engineering And Science, 3 (6). pp. 46-50. ISSN 2319 – 1813

Gilbert, David and Huq, Afreen (2014) THE WAY FORWARD FOR BUSINESS INCUBATION PROCESS IN ICT INCUBATORS IN MALAYSIA. INTERNATIONAL JOURNAL OF BUSINESS AND SOCIETY. pp. 24-35. ISSN 1511-6670

Ging Sheng , Phua (2014) Framework of distributed controlling via smartphone for industrial automation application. Masters thesis, UTeM.

Goh, Ong Sing and Ghani, M.K. A. and Yogan , Jaya Kumar and Choo, Yun Huoy and Muda, A. K. (2014) Massive Open Online Course (MOOC) with Learning Objects and Intelligent Agent Technologies. In: 2014 INTERNATIONAL CONFERENCE ON IT CONVERGENCE AND SECURITY (ICITCS), 28-30 Oct 2014, Beijing, China.

Guan, Ng Yee and Mohd Tamrin, Shamsul Bahri and Ismail, Ismi Arif and Pramudya Ananta, Gede and Hashim, Zailina and Mohd Yusoff, Irwan Syah and Md Deros, Baba and Abu Bakar, Shahriman and Rambely, Azmin Sham (2014) EFFECTIVENESS OF A PARTICIPATORY ACTION ORIENTED TRAINING INTERVENTION APPROACH AMONG HARVESTERS IN OIL PALM PLANTATION. American Journal of Applied Sciences, 11 (4). pp. 681-693. ISSN 1546-9239

Guat Peng , Ng (2014) Creep assessment of overheated grade 9Cr steels for decision making on plant integrity. ["eprint_fieldopt_thesis_type_engd" not defined] thesis, UTeM.

H

HARUN, Mohd Hanif and WAN ABDULLAH, Wan Mohd Zailimi and JAMALUDDIN, Hishamuddin and ABD RAHMAN, Roslan and Khisbullah , Hudha (2014) Dynamic Response of Commuter Rail Vehicle under Lateral Track Irregularity. Applied Mechanics and Materials, 548-54. pp. 948-952. ISSN 1662-7482.

Halim, Isa and Omar, Noor Rawaida and Kamat, Seri Rahayu and Abdullah, Rohana and Saptari, Adi and Othman, Mohd Shahrizan (2014) Analysis Of Muscle Activity Using Surface Electromyography For Muscle Performance In Manual Lifting Task. Applied Mechanics and Materials, 564. pp. 644-649. ISSN 1660-9336

Hamzah, Khairum and Kashi'ie, Najiyah Safwa and Hussin, Nor Hafizah and Wahid, Mohd Fa'iz and Che Wan Mohd Zalani, Che Wan Mohd Faizal and Sayed Kushairi, Sayed Nordin (2014) Engineering Technology Students’ Perceptions of their Learning Experiences in Studying Mathematics. International Journal of Humanities and Social Science Invention. pp. 25-28. ISSN 2319 – 7722

Hamzah, Khairum and Salim, Fadzilah and Miswan, Nor Hamizah and Md Johari, Md Ashadi and Waini, Iskandar and Kashi'ie, Najiyah Safwa (2014) A Study on the Perceptions and Attitudes of Manufacturing Engineering Technology Student’s about Student-Centred Learning. International Journal of Mathematics Trends and Technology. pp. 78-81. ISSN 2231-5373

Hamzah, Khairum and Waini, Iskandar and Salim, Fadzilah and Kashi'ie, Najiyah Safwa and Zainal, Nurul Amira and Mohd Said, Rahaini (2014) Lecturers’ Method of Teaching Mathematics: Engineering Technology Students’ Perceptions in UTeM. Journal of Education and Practice. pp. 82-85. ISSN 2222-1735

Hamzah, Khairum and Kashi'ie, Najiyah Safwa and Waini, Iskandar and Zainal, Nurul Amira and Hairol Anuar, Siti Haryanti and Hussin, Nor Hafizah (2014) Engineering Technology Students’ Attitudes towards Engagement in Mathematics. Journal of Research & Method in Education (IOSR-JRME), 4 (5). pp. 76-78. ISSN e-ISSN: 2320–7388

Hanim , Abdul Razak (2014) Pemodulat optik interferometer mach zehnder (MZI) suntikan pembawa di atas silikon-di atas-penebat (SOI). PhD thesis, UTeM.

Hannan, MA and Azidin, FA and Mohamed, Azah (2014) Hybrid electricvehiclesandtheirchallenges:Areview. Renewableand Sustainable Energy Reviews. pp. 135-150. ISSN 0033-2097

Haron, Nor Zaidi and Md Junos@Yunus, Siti Aisah and Mohamad Isa, Mohd Sa'ari and Awang Md Isa, Azmi (2014) EaSy: Efficient and Secure System for Utility Service Registration. International Journal of Digital Content Technology and its Applications(JDCTA). pp. 19-27. ISSN 1975-9339

Harpreet Sigh Bhagat , Singh Azad (2014) Queuing system 'Expections' their affects and non-queue state : a new stochastic approach. Masters thesis, UTeM.

Harun, Mohamad Haniff and Miskon, Muhammad Fahmi and Noordin, Nor Kamariah and Sali, Aduwati and Zahari, Mohd Khairy and Fadzil, Nur Faeizah and Mat Isa, Maslan (2014) Laporan Kajian Penilaian Program-Program IPTA: Keberkesanan dan Kerelevanan dari Aspek Penawaran dan Permintaa (Kluster Teknikal). Penerbit jabatan Kejuruteraan Sistem Komputer dan Komunikasi,UPM, Universiti Putra Malaysia, UPM Serdang, Selangor.

Harun, Mohamad Haniff and Mohd Aras, Mohd Shahrieel and Md Basar, Mohd Farriz and Abdullah, Shahrum Shah and Mohd Annuar, Khalil Azha (2014) Synchronization of Compass Module with Pressure and Temperature Sensor System for Autonomous Underwater Vehicle (AUV). In: The 5th International Conference on Underwater System Technology: Theory and Applications 2014, 3 - 4 December 2014, Bayview Hotel Melaka.

Harun, Mohd Hanif and W Abdullah, Wan M Zailimi and Jamaluddin, Hishamuddin and Ab Rahman, Roslan and Hudha, Khisbullah and Harun, Mohamad Hafiz (2014) Study The Potential Application Of Smart Fluid Material And Force Tracking Control Of Magnetorheological Damper. Applied Mechanics And Materials, 699. pp. 348-353. ISSN 1662-7482

Harun, Mohd Hanif and W. Abdullah @ Zakaria, W. Mohd Zailimi and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Hudha, Khisbullah (2014) Analysis Of Primary And Secondary Lateral Suspension System Of Railway Vehicle. JOURNAL OF MECHANICAL ENGINEERING, 11. pp. 19-40. ISSN 1823- 5514

Haryani, Hassan (2014) Implementation Of p-q Theory On Unified. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hasan, Ihsan Jabbar and Ab Ghani, Mohd Ruddin and Gan, Chin Kim (2014) Optimum MV Feeder Routing and Substation siting and rating in Distribution Network. In: 8th Malaysian Technical Universities Conference 2014 (MUCET 2014), 10-11 November 2014, Melaka, Malaysia.

Hasan, Ihsan Jabbar and Gan, Chin Kim and Shamshiri, Meysam and Ab Ghani, Mohd Ruddin and Omar, Rosli (2014) Optimum Feeder Routing and Distribution Substation Placement and Sizing using PSO and MST. Indian Journal of Science and Technology. pp. 1682-1689. ISSN 0974-5645

Hasan Basari, Abd Samad and Razali, Hazlina and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2014) Markovian Approach Enhancement To Simplify Optimal Mean Estimation. Applied Mathematical Sciences, 8 (111). pp. 5507-5516. ISSN 1314-7552

Hashim, Nik Mohd Zarifie and Wan Mazlan, Wan Nurul Alia and Aziz, Khairul Azha A (2014) Image based face detection using probabilistic neural network. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 2 (VIII). pp. 12-17. ISSN 2321-9653

Hashim, Nik Mohd Zarifie and Anuar, M. R. and Jaafar, Anuar and Abd Aziz, M. Z. A and Salleh, Azahari and Ja'afar, Abd Shukur (2014) Graphical user interface for wireless patient monitoring system using zigbee communication. Graphical User Interface For Wireless Patient Monitoring System Using Zigbee Communication, 9 (9). pp. 1554-1558. ISSN 1819-6608

Hashim, Nik Mohd Zarifie and Basri, H. H and Jaafar, Anuar and Abdul Aziz, M. Z. A. and Salleh, Azahari and Ja'afar, Abd Shukur (2014) Child in car alarm system using various sensors. ARPN Journal of Engineering and Applied Sciences, 9 (9). pp. 1653-1658. ISSN 1819-6608

Hashim, Nik Mohd Zarifie and Hassan Basri, Hassriaizam and Jaafar, Anuar and Abd Aziz, Mohamad Zoinol Abidin and Salleh, Azahari and Ja'afar, Abd Shukur (2014) Speech Processing In Digital Signal Processing. ARPN Journal Of Engineering And Applied Sciences, 9 (9). pp. 1653-1658. ISSN 1819-6608

Hashim, Nik Mohd Zarifie and Salleh, Azahari and Abd Aziz, Mohamad Zoinol Abidin and Ja'afar, Abd Shukur and Hamzah, Rostam Affendi (2014) Prototype of traffic light control system. In: 2013 International Conference on Advanced in Communication Technology, 27-28 December 2013, Jeju Island, Korea .

Hashim, Norlezah and Idris, Fakrulradzi and Syed Ariffin, Dr Sharifah Hafizah and Yunus, Farizah and Fisal, Norsheila (2014) Deployment of Optimized Algorithm for MPEG-4 Data Over Wireless Multimedia Sensor Network. ARPN Journal of Engineering and Applied Sciences, VOL. 9 (NO. 7). pp. 1035-1041. ISSN ISSN 1819-6608

Hasniza, Hassim (2014) Intelligent Muslim Prayer Counter With Programmable Interface Controller (PIC). Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Muhammad Zahir and Magaswaran, K. and Phuman Singh, A.S. (2014) A NEW METHOD IN THE IDENTIFICATION OF NOISE AND VIBRATION CHARACTERISTICS OF AUTOMOTIVE DISK BRAKES IN THE LOW FREQUENCY DOMAIN. International Journal of Automotive and Mechanical Engineering (IJAME), 9 (Januar). pp. 1554-1577. ISSN 2180-1606

Hayati Mukti , Asih (2014) Mixed-load machine utilization improvement and transfer batch size optimization using hybrid simulation approach. Masters thesis, UTeM.

Haziezol Helmi bin Mohd Yusof, H.H.M.Yusof and Norhayati binti Soin, N.Soin and Nissar, Nissar M.K. and Sufyan, M.Sufyan and Faiz bin Arith, Faiz Arith (2014) Compatibility Analysis of Silicon Nitride and Silicon Dioxide on HCI induced LDD MOSFET. Australian Journal of Basic and Applied Sciences (AJBAS), 8 (16). pp. 25-33. ISSN 1991-8178

Haziezol Helmi bin Mohd Yusof, H.H.M.Yusof and Wijaya Bayu Murti, Wijaya Bayu Murti and Norhayati binti Soin, N.Soin (2014) Design consideration of N-drift region doping concentration in high voltage VDMOS transistor. International Journal of Scientific Research Engineering & Technology (IJSRET), 3 (4). pp. 764-766. ISSN 2278-0882

Hazlina, Razali (2014) Determining Optimal Process Mean For Small And Medium Juice Processing Industries Using Markovian Model. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hazlinda , Kamarudin (2014) Effect of grog addition on local clay ceramic properties using extrusion method. Masters thesis, UTeM.

Hazura, Haroon (2014) Penapis Optik Berasaskan Konfigurasi Penyalun Mikrogegelang (MRR) Di Atas Silikon-Di-Atas-Penebat Untuk Aplikasi Rangkaian WDM. PhD thesis, Universiti Teknikal Malaysia Melaka.

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Putra, Azma and Ismail, Ahmad Faris (2014) Prediction of waste heat energy recovery performance in a naturally aspirated engine using artificial neural network. ISRN Mechanical Engineering, 2014. pp. 1-6. ISSN 2356-7872

Ho, Yih Hwa and Abdullah, Sabirin (2014) Reduced global positioning system (GPS) positioning error by mitigating ionospheric scintillation. In: Wireless Technology and Applications (ISWTA), 2014 IEEE Symposium on, Sept. 28 2014-Oct. 1 2014, Kota Kinabalu.

Ho, Yih Hwa and Abdullah, Sabirin and Mohtar, M.H (2014) Global Positioning System (GPS) Positioning Errors During Ionospheric Scintillation Event. Jurnal Teknologi , 69 (2). pp. 33-38. ISSN 2180-3722

Ho , Peng Hou (2014) Analysis on the effect of first-in-first-out queue length ratio to the multi-hop wireless network performance. Masters thesis, UTeM.

I

Ibrahim, Zulkifilie and Hossain, Md. Liton and Bugis, Ismadi and Mat Lazi, Jurifa and Mohd Yaakop, Nurazlin (2014) Comparative Analysis Of PWM Techniques For Three Level Diode Clamped Voltage Source Inverter. International Journal Of Power Electronics And Drive System (IJPEDS), 5 (1). pp. 15-23. ISSN 2088-8694

Ibrahim, Zulkifilie and Hossain, Md. Liton and Bugis, Ismadi and Nik Mahadi, Nik Munaji and Abu Hasim, Ahmad Shukri (2014) Simulation Investigation Of SPWM, THIPWM And SVPWM Techniques For Three Phase Voltage Source Inverter. International Journal Of Power Electronics And Drive System (IJPEDS), 4 (2). pp. 223-232. ISSN 2088-8694

Idris, Muhammad Idzdihar and Yusop, Norbayah and Chachuli , S. A. M. and Ismail , M. M. (2014) Design and analysis of low noise amplifier using cadence. Journal of Theoretical and Applied Information Technology, 69 (1). pp. 151-160. ISSN 1992-8645

Idris, M. Idzdihar and Yusop, Norbayah and Chachuli, S. A. M. and Ismail, M. M. (2014) Low power operational amplifier in 0.13um technology. Low Power Operational Amplifier in 0.13um Technology, 9 (1). pp. 34-44. ISSN 1913-1844

Idris, M. Idzdihar and Yusop, Norbayah and Mohd. Chachuli, Siti Amaniah and Faiz bin Arith, Faiz Arith (2014) Design and analysis of low noise amplifier using cadence. Journal of Theoretical and Applied Information Technology. pp. 151-160. ISSN 1992-8645

Ifayefunmi, Olawale (2014) Interactive buckling tests on steel cones subjected to axial compression and external pressure - a comparison of experimental data and design codes. Ships and Offshore Structures, 9 (6). pp. 669-679. ISSN 1744-5302

Ifayefunmi, Olawale (2014) A survey of buckling of conical shells subjected to axial compression and external pressure. Journal of Engineering Science and Technology Review , 7 (2). pp. 182-189. ISSN 1791-2377

Ifayefunmi, Olawale and Blachut, Jan (2014) Toricones: burst pressures. In: Proceedings of the twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples, Italy.

Imran , Mohd Ibrahim and Abdul Rahman, Tharek and Sabran, Mursyidul Idzam and Jamlos, Mohd Faizal (2014) Comparison of Polypropylene and FR4 Dielectric Cavity for RLSA Antenna Design at 5.8GHz. In: 2014 IEEE Region 10 Symposium, 14-16 April 2014, Kuala Lumpur.

Imran , Mohd Ibrahim and Tharek, Abdul Rahman (2014) A NOVEL WIDE BAND OPEN ENDED AIR GAP RADIAL LINE SLOT ARRAY ANTENNA AT 5.8GHZ FREQUENCY BAND. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 56 (4). pp. 938-944. ISSN 1098-2760

Imran , Mohd Ibrahim and Tharek, Abdul Rahman and Solomon, Zakwoi and Mursyidul Izham, Sabran (2014) Aperture slot size effect to wide band open air gap radial-line slot array performance. MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 56 (12). pp. 2974-2978. ISSN 1098-2760

Intan Azmira , Abdul Razak and Izham , Zainal Abidin and Keem Siah, Yap and Titik Khawa, Abdul Rahman (2014) Feature selection and parameter optimization with GA-LSSVM in electricity price forecasting. Journal of Electrical Engineering, 15 (1). pp. 1-8. ISSN 1582-4594

Irianto, Irianto (2014) A Preliminary Report on the Utilization of PSO for Solving the Hamiltonian Systems. Australian Journal of Basic and Applied Sciences (8(5) S). pp. 370-374. ISSN 1991-8178

Isa, Halim and Noor Rawaida , Omar and Kamat, Seri Rahayu and Abdullah, Rohana and Saptari, Adi and Mohd Shahrizan, Othman (2014) Analysis of Muscle Activity using Surface Electromyography for Muscle Performance in Manual Lifting Task. Applied Mechanics and Materials, 564. pp. 644-649. ISSN 1660-9336

Isa, Halim and Hambali, A and Kamat, Seri Rahayu and Abdullah, Rohana (2014) Development of a Decision Support System for Analysis and Solutions of Prolonged Standing in the Workplace. Safety and Health at Work, 5. pp. 97-105. ISSN 2093-7911

Isa, Halim and Noor Rawaida , Omar and Syed Mohamed, Muhammad Syafiq and Rohana, Abdullah and Nuradilah , Zahari and Hafiz, Zani and Fatihah Ros , Ahmad (2014) Psychophysical experience and heart rate analysis in manual lifting task of Malaysian population. Applied Mechanics and Materials, 761 (-). pp. 659-663. ISSN 1662-7482

Isa , Halim and Ab. Rahman, Mahmood and Hasan, Hazmilah and Haeryip , Sihombing and Adi , Saptari and Baharudin, Abu Bakar (2014) Ergonomic Design of CNC Milling Machine for Safe Working Posture. Applied Mechanics and Materials. pp. 60-64. ISSN 1660-9336

Ismail, Mohd Muzafar and Janudin, Nur Hazwani and Zakaria, Zahriladha and Othman, Mohd Azlishah (2014) A Computational Presentation Of Bioelectromagnetic Applications Using Numerical Method Approaches. Journal Of Advances In Information Technology, 5 (1). pp. 31-36. ISSN 1798-2340

Ismail, Mohd Muzafar and Othman, Mohd Azlishah and Zakaria, Zahriladha and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Ramlee, Ridza Azri and Meor Said, Maizatul Alice and Abas, Norafizah and Zainuddin, Muhammad Noorazlan Shah and Abdul Rahim, Razilah and Mohamed Aminuddin, Mai Mariam and Idris, Muhammad Idzdihar (2014) Bending Waveguide Modeling For Light Trapping Into Optical Fiber. Advanced Science Letters, 20 (2). pp. 412-417. ISSN 1936-6612

Ismail, Rafidah and Othman, Norfaridatul Akmaliah (2014) The Effectiveness Of Government-Support Programmes Toward Business Growth. Journal of Technology Management and Technopreneurship, 2 (2). pp. 41-52. ISSN 2231-7996

J

JOPRI, MOHD HATTA and abidullah, Noor Athira and goh, zai peng and Abdullah, Abdul Rahim (2014) A New Two Points Method for Identify Dominant Harmonic Disturbance Using Frequency and Phase Spectrogram. International Review of Electrical Engineering, 9 (2). pp. 453-459. ISSN 1827- 6660

Jaafar, Hazriq Izzuan and Mohamed, Zaharuddin and Jamian, Jasrul Jamani and Mohd Aras, Mohd Shahrieel and Anuar, Mohamed Kassim and Sulaima, Mohamad Fani (2014) Effects of Multiple Combination Weightage using MOPSO for Motion Control Gantry Crane System. Journal of Theoretical and Applied Information Technology, 63 (3). pp. 807-813. ISSN 1992-8645

Jaafar, Hazriq Izzuan and Mohamed, Zaharuddin and Zainal Abidin, Amar Faiz and Md Sani, Zamani and Jamian, Jasrul Jamani and Anuar , Mohamed Kassim (2014) Performance Analysis for a Gantry Crane System (GCS) using Priority-based Fitness Scheme in Binary Particle Swarm Optimization. Advanced Material Research, 903. pp. 285-290. ISSN 1022-6680

Jaafar, Hazriq Izzuan and Syed Hussien, Sharifah Yuslinda and Selamat, Nur Asmiza and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri (2014) Development of PID Controller for Controlling Desired Level of Coupled Tank System. International Journal of Innovative Technology and Exploring Engineering, 3 (9). pp. 32-36. ISSN 2278-3075

Jaafar, Hazriq Izzuan and Syed Hussien, Sharifah Yuslinda and Selamat, Nur Asmiza and Mohd Nasir, Mohamad Na'im and Jali, Mohd Hafiz (2014) Analysis of Transient Response for Coupled Tank System via Conventional and Particle Swarm Optimization (PSO) Techniques. International Journal of Engineering and Technology (IJET), 6 (5). pp. 2002-2007. ISSN 0975-4024

Jaafar, Anuar and Mad Lazim, Muzafirah and Hashim, Nik Mohd Zarifie and Salleh, Azahari and Ja'afar, Abd Shukur (2014) Division Algorithm Design Using Field Programmable Gate Array. International Journal for Advance Research in Engineering and Technology, 2 (VII). pp. 95-104. ISSN 2320-6802

Jaafar, Anuar and Saffie, Nor Baiyah and Sulaiman, Mohd Hafiz (2014) OPTICAL SWITCHING CONTROLLER USING FPGA AS A CONTROLLER FOR OCDMA ENCODER SYSTEM. International Journal of Science and Engineering Applications , 3. pp. 6-9. ISSN 2319-7560

Jaafar, Hazriq Izzuan and Syed Hussien, Sharifah Yuslinda and Ghazali, Rozaimi and Mohamed, Zaharuddin and Jamian, Jasrul Jamani and Mohd Aras, Mohd Shahrieel and Mohd Nasir, Mohamad Na'im and Sulaiman , Mohd Fairuz (2014) Analysis Of Optimal Motion Performance For Underactuated Gantry Crane System Using MOPSO With Linear Weight Summation Approach. Journal of Engineering and Technology, 5 (2). pp. 39-49. ISSN 2180-3811

Jalaputhra, Dewakumari and Hashim, Nik Mohd Zarifie and Ibrahim, Mohd Izhan and Ja'afar, Abd Shukur and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Application Of Digital Signal Processing In Echo Cancellation : A Survey. International Journal of Science and Engineering Applications , 3 (5). pp. 150-153. ISSN 2319-7560

Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi and Bohari, Zul Hasrizal and SARKAWI, HAFEZ and Sulaima, Mohamad Fani and Baharom, Mohamad Faizal and Wan Daud, Wan Mohd Bukhari (2014) JOINT TORQUE ESTIMATION MODEL OF SEMG SIGNAL FOR ARM REHABILITATION DEVICE USING ARTIFICIAL NEURAL NETWORK TECHNIQUES. ARPN Journal of Engineering and Applied Sciences, 9 (7). pp. 1170-1176. ISSN 1819-6608

Jali, Mohd Hafiz and Bohari, Zul Hasrizal and Sulaima, Mohamad Fani and Mohd Nasir, Mohamad Na'im and Jaafar, Hazriq Izzuan (2014) Classification of EMG Signal Based on Human Percentile using SOM. Research Journal of Applied Sciences, Engineering and Technology, 8 (2). pp. 235-242. ISSN 2040-7459

Jali, Mohd Hafiz and Ibrahim, 'Iffah Masturah and Bohari, Zul Hasrizal and Sulaima, Mohamad Fani and Mohd Nasir, Mohamad Na'im (2014) CLASSIFICATION OF ARM MOVEMENT BASED ON UPPER LIMB MUSCLE SIGNAL FOR REHABILITATION DEVICE. Journal of Theoretical and Applied Information Technology, 68 (1). pp. 125-137. ISSN 1992-8645

Jali, Mohd Hafiz and Ibrahim, 'Iffah Masturah and Sulaima, Mohamad Fani and Ahmad Izzuddin, Tarmizi and Wan Daud, Wan Mohd Bukhari (2014) EMG Signal Features Extraction of Different Arm Movement for Rehabilitation Device. International Journal of Applied Engineering Research, 9 (21). pp. 11151-11162. ISSN 0973-4562

Jali, Mohd Hafiz and Ibrahim, I.M. and Sulaima, Mohamad Fani and Ahmad Izzuddin, Tarmizi and Wan Daud, Wan Mohd Bukhari (2014) EMG Signal Features Extraction of Different Arm Movement for Rehabilitation Device. International Journal of Applied Engineering Research, 9 (21). pp. 11151-11162. ISSN 0973-4562

Jali, Mohd Hafiz and SARKAWI, HAFEZ and Ahmad Izzuddin, Tarmizi and Sulaima, Mohamad Fani and Mohd Nasir, Mohamad Na'im (2014) Solar PV Project Implementation Feasibility Study based on Feed-in Tariff in Malaysia. International Journal of Applied Engineering Research, 9 (21). pp. 9629-9638. ISSN 0973-4562

Jali, Mohd Hafiz and SARKAWI, HAFEZ and Ahmad Izzuddin, Tarmizi and Sulaima, Mohamad Fani and Mohd Nasir, Mohamad Na'im (2014) Solar PV Project Implementation Feasibility Study based on Feed-in Tariff in Malaysia. International Journal of Applied Engineering Research, 9 (21). pp. 9629-9638. ISSN 0973-4562

Jali, Mohd Hafiz and Sulaima, Mohamad Fani and Ahmad Izzuddin, Tarmizi and Wan Daud, Wan Mohd Bukhari and Baharom, Mohamad Faizal (2014) Comparative Study of EMG based Joint Torque Estimation ANN Models for Arm Rehabilitation Device. International Journal of Applied Engineering Research. pp. 1289-1301. ISSN 0973-4562

Jali, Mohd Hafiz and SARKAWI, HAFEZ and Ahmad Izzuddin, Tarmizi and Bohari, Zul Hasrizal and Sulaima, Mohamad Fani (2014) Predicting EMG Based Elbow Joint Torque Model Using Multiple Input ANN Neurons for Arm Rehabilitation. In: 2014 UKSim 14th International Conference on Modelling and Simulation, 26 - 28 March 2014, UK.

Jamaludin, Zamberi and Minhat, Mohamad (2014) Review on Cutting Force Compensation Techniques for Machine Tools Application. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Jano, Zanariah and Janor, Hawati and Mohd Jailani, Mohd Nor and Rabiah, Ahmad and Shaaban, Azizah (2014) A qualitative content analysis of e-strategies for Research, Innovation and Commercialization: A case of global bodies,Malaysian ministries and Research university. In: Goverment e-strategic planning and Management. Springer, New York, pp. 305-325.

Jasni, Syazwan and Chong , Shin Horng and Yahya , Abu Bakar (2014) Feature extraction of a sEMG in term of force. In: 1st IEEE EMBS International Student Conference in Malaysia , June 5, 2014 , Universiti Putra Malaysia .

Jaya, A. S. M and Hashim, S. Z. M. and haron, habibollah and Muhamad, Mohd Razali and Basari, A.S.H and abd rahman, md nizam (2014) Modeling of TiN Coating Thickness Using RSM Approach. Key Engineering Materials. pp. 556-560. ISSN 1662-9795

Jaya Kumar, Yogan and Salim, Naomie and Abuobieda, Albaraa and Ameer Tawfik, Albaham (2014) Multi document summarization based on news components using fuzzy cross-document relations. Applied Soft Computing, 21. pp. 265-279. ISSN 1568-4946

Johar, F M and Azmin, F A and Shibghatullah, A S and Suaidi, M K and Ahmad, B H and Aziz, M Z A Abd and Salleh, S N and Shukor, M Md (2014) Application of Genetic Algorithm to the Design Optimization of Complex Energy Saving Glass Coating Structure. Journal of Physics: Conference Series, 495 (1). 012031. ISSN 1742-6596

K

Kadir, Abdul and Azha, Khairul and Irianto, Irianto (2014) A New Object Recognition Approach Using Combination of Texture, Color and Shape Features. In: iDECON 2014, 22-23 September 2014, Avilion Legacy Hotel, Melaka. (In Press)

Kadir, Abdul (2014) Buku Pertama Belajar Pemrograman Java untuk Pemula. Mediakom, Yogyakarta. ISBN 9789798773686

Kadir, Abdul (2014) From Zero to A Pro: Pemrograman Aplikasi Android. Penerbit ANDI, Yogyakarta. ISBN 978-979-29-2153-3

Kadir, Abdul (2014) A Model of Plant Identification System Using GLCM, Lacunarity and Shen Features. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (2). pp. 1-10. ISSN 0975-8585

Kadir, Abdul and Triwahyuni, Terra (2014) Pengantar Teknologi Informasi Edisi Revisi. Penerbit Andi. ISBN 978-979-29-2159-5

Kamalrudin, Massila and Sidek, Safiah (2014) Automatic Acceptance Test Case Generation From Essential Use Cases. In: New Trends in Software Methodologies, Tools and Techniques,Series:Frontiers in Artificial Intelligence and Applications,. IOS Press.

Kamalrudin, Massila and Sidek, Safiah (2014) VALIDATION OF SECURITY REQUIREMENTS FOR MOBILE APPLICATION: A STUDY. VALIDATION OF SECURITY REQUIREMENTS FOR MOBILE APPLICATION: A STUDY. pp. 1-4. ISSN N 1013-5316

Kamalrudin, Massila and Sidek, Safiah (2014) THE NEEDS OF CLINICAL DOMAIN LIBRARY FOR ELICITING ACCURATE CLINICAL REQUIREMENTS. THE NEEDS OF CLINICAL DOMAIN LIBRARY FOR ELICITING ACCURATE CLINICAL REQUIREMENTS. pp. 1-4. ISSN 1013-5316

Kamalrudin, Massila and Sidek, Safiah (2014) A Pair-oriented Requirements Engineering Approach for Analysing Multi-lingual Requirements. In: Communications in Computer and Information Science, Requirements Engineering,. Springer Verlag.

Kamarul Ariffin, Zakaria (2014) Kesan Pembebanan Spektrum Dan Suhu Terhadap Hayat Lesu Aloi Aluminium AA6061 Dan AA7075. PhD thesis, Universiti Teknikal Malaysia Melaka.

Kamat, Seri Rahayu and Isa, Halim and Hui Hui, Yee (2014) Effect of Working Posture and Hand Grip for Carpal Tunnel Syndrome among Aerospace Workers. International Journal of Mechanical & Mechatronics Engineering , 14 (No:01). pp. 1-6. ISSN 2077-124X (online) 2227-2771 (Print)

Kashi'ie, Najiyah Safwa and Hamzah, Khairum and Waini, Iskandar and Salim, Fadzilah and Mukhtar, Mohd Fariduddin and Zainal, Nurul Amira (2014) Attitudes towards Motivation in Mathematics: A Case Study on Engineering Technology Students at FTK, UTeM. International Journal of Science and Research (IJSR), 3 (10). pp. 1017-1019. ISSN 2319-7064

Kasim, Mohd Shahir (2014) Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 15-21. ISSN 21803722

Kasim, Mohd Shahir (2014) Modeling and Multi-response Optimization on WEDM Ti6Al4V. Applied Mechanics and Materials, 510. pp. 123-129. ISSN 1660-9336

Kasim, Mohd Shahir and Raja, Izamshah and Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi 'Azam and Che Haron, Che Hassan and A.G., Jaharah (2014) The influence of cutting parameter on heat generation in high-speed milling Inconel 718 under MQL condition. Journal of Scientific & Industrial Research (JSIR), 73 (1). pp. 62-65. ISSN 0975-1084 (Online); 0022-4456 (Print)

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Kasim, Mohd Shahir and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Mohamad, Effendi and Raja, Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-objective optimization using Box-Behnken of response surface methodology for high-speed machining of Inconel 718. Applied Mechanics and Materials, 629. pp. 487-492. ISSN 1662-7482

Kasim, Mohd Shahir and Che Haron, Che Hassan and Ghani, J. A. and Mohamad, Effendi and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Saedon, Juri (2014) Multi-Objective Optimization Using Box-Behken Of Response Surface Methodology For High-Speed Machining Of Inconel 718. Applied Mechanics and Materials, 629 (-). pp. 487-492. ISSN 1660-9336

Kasim, Mohd Shahir and Mohd Zahudi, Mohd Sufri and Che Haron, Che Hassan and Abdul Ghani, Jaharah and Raja, Izamshah and Mohd Isa, Mohd Hanafiah and Saedon, Juri and Roni Sahroni, Taufik and Ito, Teruaki (2014) The effect of wedm cutting parameter on inconel 718 subsurface microhardness. Journal of Advanced Manufacturing Technology, 8 (2). pp. 51-59. ISSN 1985-3157

Kasim, Mohd Shahir and Raja, Izamshah and Mohamad, Minhat and Mohamad, Noraiham and Che Haron, Che Hassan and A.G., Jaharah and Saedon, Juri and Saad, Nor Hayati and Mohamed, Saiful Bahri (2014) Prediction of cutting force in end milling of Inconel 718. Journal of Engineering and Technology (JET), 5 (2). pp. 63-70. ISSN 2180-3811

Kasrul, Abdul Karim and Md Nazri , Othman and Auzani , Jidin and Mohd Zulkifli, Ramli (2014) Development Of Integrated Monitoring System For Re-Electric Vehicle. Jurnal Teknologi, 71. pp. 99-104. ISSN 2180–3722 (Submitted)

Ke Sin , Lim (2014) WIP control at end of line of semiconductor industry using CONWIP. Masters thesis, UTeM.

Khairuddin, Osman and Ahmad 'Athif , Mohd Faudzi and Mohd Fua'ad , Rahmat and Koichi, Suzumori (2014) System Identification And Embedded Controller Design For Pneumatic Actuator With Stiffness Characteristic. Mathematical Problems in Engineering, 2014. pp. 1-13. ISSN 1563-5147

Khairuddin Yap, Mohamad Nazri and A Bakar, Ahmad Zaki and Kamalrudin, Massila and Sidek, Safiah (2014) A Review On Agile Decision Making In Crisis Management. A Review On Agile Decision Making In Crisis Management. pp. 1535-1541. ISSN 1013-5316

Khairul Anuar , A.Rahman (2014) Developing a meso-scale non-contact measuring method based on vision system : calibration of CCD camera. Masters thesis, UTeM.

Khairul Anuar , Juhari (2014) Development of mobile robot and localization system. Masters thesis, UTeM.

Khairul Izani , Mohd Zukee (2014) Effect of chemicals surface treatment of PVD TiN coated WC on the coating adhesion. Masters thesis, UTeM.

Khairun Nisa, Khamil (2014) Design And Analysis Of MEMS Capacitive Accelerometer With Optimized Sensitivity. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khalil Azha , Mohd Annuar (2014) Thermal performance of various pin fin heat sink design for electronic cooling. Masters thesis, Universiti Teknologi Malaysia.

Khamis, Aziah (2014) Islanding detection in a distributed generation integrated power system using phase space technique and probabilistic neural network. Neurocomputing. pp. 587-599. ISSN 0925-2312

Khamis, Aziah (2014) An Optimal Load Shedding Methodology for Radial Power Distribution Systems to Improve Static Voltage Stability Margin using Gravity Search. Jurnal Teknologi . pp. 71-16. ISSN 2180-3722

Khoo, Hui Ping and Chong, Shin Horng and Yahya , Abu Bakar (2014) Feature extraction on forearm using surface electromyography (sEMG) technique. In: IEEE EMBS International Student Conference (ISC), 5, June 2014, Universiti Putra Malaysia, Malaysia.

Khuzaimi, Mohd Aris (2014) Comparison of machinability aluminium alloy LM6 when using coated and uncoated carbide cutting tool. Masters thesis, UTeM.

Kok, Swee Leong and Abdul Rani , Othman and Azizah Shaaban , Ahmad (2014) Screen-printed ceramic based MEMS piezoelectric cantilever for harvesting energy. Screen-Printed Ceramic Based MEMS Piezoelectric Cantilever for Harvesting Energy, 90. pp. 84-92.

Kok, Swee Leong and Lau, Kok Tee and Qumrul, Ahsan (2014) Substrate-free thick-film lead zirconate titanate (pzt) performance measurement using Berlincourt method. Advanced Materials Research, 895. pp. 204-210.

Kumaresan, Magaswaran (2014) Low frequency friction induced vibration of automotive disc brake. Masters thesis, UTeM.

L

Laila , Ahmad (2014) Analysis working posture and psychophysical factor in stamping industry using rula method. Masters thesis, UTeM.

Laily, Suraya and Md Ali, Mohd Amran and Nur Izan Syahriah, Hussein and Mohd Razali, Muhamad and Manshoor, Bukhari and Mohd Amri, Lajis and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik , Roni Sahroni (2014) TAGUCHI METHOD PREDICTION OF EDM DIE-SINKING PARAMETERS ON SURFACE INTEGRITY FOR ALUMINIUM COMPOSITE USING COPPER ELECTRODE. Sci.Int.(Lahore), 26 (4). pp. 1455-1458. ISSN ISSN 1013-5316; CODEN: SINTE 8

Latif, Yahril Hidayat and Md Saad, Mohd Shamsuri and Abdullah, Aida Nasirah and Robani, Anidah (2014) A Conceptual Framework Of The Impact Of Team Communication Practices On Innovative Team Performance. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 26 (5). pp. 1763-1766. ISSN 1013-5316

Lau, Kok-Tee and Sorrell, C.C. (2014) Effect of Cationic Charging Agent on the Bonding Strength of Coarse Titanium Particles Deposited by Electrophoretic Deposition. International Journal of the Institute of Materials Malaysia. pp. 1-15. ISSN ISSN: 1511-8487

Liaw, Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah and Sutikno, Tole (2014) A Review Of Parabolic Dish-Stirling Engine System Based On Concentrating Solar Power. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (4). pp. 1142-1152. ISSN 1693-6930

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2014) Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM. International Journal of Machine Tools & Manufacture. pp. 13-20. ISSN 0890-6955

Liew , Siaw Hong and Choo, Yun Huoy and Low, Yin Fen and Mohd Yusoh, Zeratul Izzah and Yap, Tian Bee and Muda, Azah Kamilah (2014) Comparing features extraction methods for person authentication using EEG signals. In: WICT'14, 8-10 December 2014, Melaka. (In Press)

Lim , Wee Teck and Mohd Aras, Mohd Shahrieel and Ab Azis, Fadilah and Mohd Nor, Arfah Syahida and Hasim, Norhaslinda (2014) Comparison of Depth Control from Surface and Bottom Set point of an Unmanned Underwater Remotely Operated Vehicle using PID Controller. In: The 5th International Conference on Underwater System Technology : Theory and Application (USYS'14), 3-4 December 2014, Bayview Hotel Melaka.

Lizwa, Rashid and Salleh, Yahya and Samer Ali, Shamee and Juhaini, Jabar and Muliati, Sedek and Sarah, Halim (2014) Eco product innovation in search of meaning: incremental and radical practice for sustainability development. Asian Social Science. pp. 78-89. ISSN 1911-2017

Loh, Ser Lee and Salleh, Shaharuddin and Sarmin, Nor Haniza (2014) An extended partitioning technique to transform trees into single-row networks. Applied Soft Computing, 22. pp. 483-491. ISSN 1568-4946

Lokman , Abdullah (2014) A new control strategy for cutting force disturbance compensation for XY table ball screw driven system. PhD thesis, UTeM.

Luqman Bayasut, Bilal and Pramudya, Gede and Basiron, Halizah (2014) The application of multi layer feed forward artificial neural network for learning style identification. Advanced Science Letters, 20 (10-12). pp. 2180-2183. ISSN 1936-6612

M

M., Zulkiflee and N., Haniza and Sahib, Shahrin and Abd. Ghani, Mohd Khanapi (2014) A framework of IPv6 network attack dataset construction by using testbed environment. International Review on Computers and Software (I.RE.CO.S.). pp. 1434-1441. ISSN 1828-6003

M.A., Burhanuddin and Ghani, M.K. A. and Asmala, A. and Zuraida , Abal Abas and Zeratul Izzah, Mohd Yusoh (2014) Reliability Analysis of the Failure Data in Industrial Repairable Systems due to Equipment Risk Factors. Reliability Analysis of the Failure Data in Industrial Repairable Systems due to Equipment Risk Factors, 8 (31). pp. 1543-1555. ISSN 1314-7552

Maaspaliza, Azri (2014) Comparison of single-phase transformerless photovoltaic grid-connected inverter topologies with high efficiency and low ground leakage current. PhD thesis, UTeM.

Mad Lazim, Muzafirah and Hashim, Nik Mohd Zarifie and Sulaiman Wong, Najibah and Salleh, Azahari (2014) A Study On Image Enhancement. International Journal of Emerging Technology & Research, 1 (6). pp. 67-73. ISSN 2347-6079

Magaswaran, K. and Hassan, Muhammad Zahir and Phuman Singh, A.S. (2014) A Parallel Study of Vibration Analysis and Acoustic Analysis in Low Frequency Brake Noise. APPLIED MECHANICS AND MATERIALS, 471. pp. 35-39. ISSN 1662-7482

Mahmood , Muayad Mohammed (2014) Investigating challenges and requirements for fifth deployment in Iraq environment : mosul case study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Maidin, Shajahan and Wan Malek, Wan Nasuha (2014) Laptop Casing Aesthetic Improvement. Journal of Advanced Manufacturing Technology, 7. NA. ISSN 1985-3157

Main, Aspalilla and Zakaria, Nurul Azma and Yusof, Robiah (2014) Organisational Readiness Component To Develop Readiness Model Towards Smooth IPv6 Migration. Journal of Applied Science and Agriculture, 9 (11). pp. 9-14. ISSN 1816-9112

Maithem Hassen, Kareem (2014) Direct Assesment Of Multi-Machine Power System Stability Using Catastrophe Theory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Maiz Hadj, Ahmed Mustafa (2014) Design And Implementation Of Photovoltaic Water Pumping System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mamat, Normaisharah and Abdul Karim, Kasrul and Ibrahim, Zulkifilie and Ahmad Tarusan, Siti Azura and Mat Lazi , Jurifa and Yusup Lada, Musa (2014) Analysis Of A Bearingless Permanent Magnet Synchronous Motor. Science International-Lahore, 26. pp. 1639-1643. ISSN 1013-5316

Manap, Abreeza and Misran, Halina and Okabe, T and Ogawa, K and Omar, Nooririnah (2014) Experimental and SPH study of cold spray impact on similar and dissimilar metals. Surface Engineering, 30 (5). pp. 335-341. ISSN 02670844

Mansor, N. F. and Abal Abas, Zuraida and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad and Safiah , Sidek (2014) An analysis of the parameter modifications in varieties of harmony search algorithm. International Review on Computers and Software (IRECOS) , 9 (10). pp. 1736-1749. ISSN 1828-6003

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Ariff, Hambali (2014) Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ–Morphological Chart–Analytic Hierarchy Process method. Materials and Design, 54. pp. 473-482. ISSN 0261-3069

Mansor, Muhd Ridzuan and Sapuan, S.M (2014) Materials Selection for Lightweight Automotive Composite Hand Operated Parking Brake Lever Design with a Weighted Property Index Method. In: Engineering Composites: Properties and Applications. UPM Press, Serdang, pp. 248-264. ISBN 978-967-344-396-3

Mansor, Muhd Ridzuan and Sapuan, S.M and Edi Syams, Zainudin and Abd Aziz, Nuraini and Hambali, A (2014) Application of Integrated AHP-TOPSIS Method in Hybrid Natural Fiber Composites Materials Selection for Automotive Parking Brake Lever Component. Australian Journal of Basic and Applied Sciences, 8 (5). pp. 431-439. ISSN 19918178

Mansor, Muhd Ridzuan and Sapuan, S.M and Edi Syams, Zainudin and Nuraini, A.A. and Hambali, A and Alias, Mohd Fuad (2014) A Simplified Life Cycle Analysis of an Automotive Parking Brake Lever using Polymer Composites. Applied Mechanics and Materials, 699. pp. 395-400. ISSN 1660-9336

Mansor, Muhd Ridzuan and Sapuan, S.M and Hambali, Arif and Zainudin, Edi Syams and Nuraini, A.A. (2014) Materials Selection of Hybrid Bio-Composites Thermoset Matrix for Automotive Bumper Beam Applicationusing Topsis Method. Advances in Environmental Biology, 8 (8). pp. 3138-3442. ISSN 1995-0756

Mansor, Muhd Ridzuan and Sapuan, S.M and Zainudin, E.S. and Nuraini, A.A. and Hambali, Arif (2014) Thermoplastic Matrix Material Selection using Multi Criteria Decision Making Method for Hybrid Polymer Composites. Applied Mechanics and Materials, 564. pp. 439-443. ISSN 1660-9336

Mansor, Muhd Ridzuan and Sapuan, S.M and Zainudin, Edi Syams and Abd Aziz, Nuraini and Hambali, A (2014) Rigidity Analysis of Kenaf Thermoplastic Composites using Halpin-Tsai Equation. Applied Mechanics and Materials , 548-54. pp. 29-33. ISSN 1662-7482

Mardiana, Bidin and Sahbudin, Saari and Menon, P.S and Haroon, Hazura and Hanim, Abdul Razak and Arsad, N. and Abdullah, H. (2014) Analyses for various doping structures of SOI-based optical phasemodulator using free carrier dispersion effectB. Optik, 125. pp. 1800-1803. ISSN 0030-4026

Marzuki, Noor Munirah and Abdul Kadir, Tuty Asmawaty and Shibghatullah, Abdul Samad (2014) Halal barcode scanner prototype in android using client side processing with JSON technology. Science International. pp. 1751-1753. ISSN 1013-5316

Mashitah , Che Razali (2014) Singularly perturbation method for multivariable proportional-integral-derivative controller tuning. Masters thesis, UTeM.

Maslan, Mohd Nazmin and Jamaludin, Zamberi and A Rahman, Muhamad Arfauz and Chiew, Tsung Heng and Md Solihin, Mohd Zaidi and Karjanto, Juffrizal and Mailah, Musa (2014) Displacement control of piezoelectric patch actuator using PID controller. Science International, 26 (5). pp. 1883-1887. ISSN 1013-5316

Maslan, Mohd Nazmin and Jamaludin, Zamberi and A Rahman, Muhamad Arfauz and Abdullah, Lokman and Abd Latib, Mohd Lutfan and Karjanto, Juffrizal and Mailah, Musa (2014) Development of System Identification for Piezoelectric Patch Actuator. Applied Mechanics and Materials. pp. 1-5. ISSN 1660-9336 (Submitted)

Masrullizam, Mat Ibrahim (2014) Video Processing Analysis For Non-Invasive Fatigue Detection And Quantification. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mat Ibrahim, Masrullizam (2014) Eye-state analysis using an interdependence and adaptive scale mean shift (IASMS) algorithm. Biomedical Signal Processing and Control, 11. pp. 53-62. ISSN 1746-8094

Mat Ibrahim, Masrullizam and Awang Md Isa, Azmi and Darsono, Abdul Majid (2014) Eye Closure and Open Detection Using Adaptive Thresholding Histogram Enhancement (ATHE) Technique and Connected Components Utilisation. In: Intelligent and Advanced Systems (ICIAS), 2014 5th International Conference, 3-5 June 2014 , KLCC Kuala Lumpur.

Mat Ibrahim, Masrullizam and Soraghan , John and Abd Manap, Nurulfajar (2014) Iris localisation using Fuzzy Centre Detection (FCD) scheme and active contour snake. Jurnal Teknologi (Sciences and Engineering), 69 (6). pp. 73-77. ISSN e-ISSN 2180 – 3722

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2014) The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures. In: 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), 12-14 November 2014, Malaysia-Japan Internation Institute of Technology (MJJIT).

Mazlan, A. M. and M. R., Sapiee and Yahaya, M. S. (2014) The Concept of Single Use Piston Break Safety Syringe. In: International Conference on Design and Concurrent Engineering (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.

Md Ali, Mohd Amran and Hilmi, Hazwani and Mohd Sani, Siti Salmah and Abdullah, Zulkeflee and Mohamad, Effendi and Liew , Pay Jun (2014) Evaluation of Mechanical Performance of Homopolymer Polypropylene/Kenaf Fibre/ Binder using Full Factorial Method. Advanced Research in Materials Science, 1 (1). pp. 7-13. ISSN 2289-7992

Md Ali, Mohd Amran and Laily, Suraya and Fatin, Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Mohd Amri, Lajis and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-Sinking. Applied Mechanics and Materials, 660. pp. 43-47. ISSN 1662-7482

Md Ali, Mohd Amran and Laily, Suraya and Nor, Halida Ilyani Kamarudin and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials, 465-466. pp. 1214-1218. ISSN 1662-7482

Md Ali, Mohd Amran and Salmah, Siti and Abdul Aziz, Mohd Sanusi and Mohd Yuhazri, Yaakob and Noraiham, Mohamad and Mohd Abid, Mohd Asyadi Azam and Zulkeflee, Abdullah and mohamad , effendi (2014) Surface Roughness Optimization in Drilling Process Using Response Surface Method (RSM). Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 29-35. ISSN 21803722

Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Sivarao, Subramaniam and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985

Md Ali, Mohd Amran and Suraya, Laily and Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-Sinking Parameters on Non-Conductive Materials. Advanced Materials Research, 903. pp. 56-60. ISSN 1662-8985

Md Ali, Mohd Amran and Laily, Suraya and Kamarudin, NOR Halida Ilyani and Hussein, Nur Izan Syahriah and Mohd Razali, Muhamad and Bukhari, Mashoor and Lajis, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials. pp. 1214-1218. ISSN 1662-7482

Md Ali, Mohd Amran and Laily, Suraya and Nor Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Mohd Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-sinking Parameters on Non-conductive Materials. Applied Mechanics and Materials. pp. 56-60. ISSN 1662-7482

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.

Md Ali, Mohd Amran and Salmah, Siti and Zolkarnain, Marjom and Umar , Al-amani and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Zulkeflee, Abdullah and Abdul Aziz, Mohd Sanusi (2014) WARPAGE ANALYSIS VERIFICATION BETWEEN SIMULATION AND EXPERIMENTAL OF DUMBBELL PLASTIC PART IN THE INJECTION MOULDING PROCESS. Sci.Int.(Lahore), 26 (4). pp. 1575-1579. ISSN ISSN 1013-5316

Md Fahmi, Abd Samad (2014) Evolutionary Computation in System Identification: Review and Recommendations. International Journal of Automatic Control. pp. 208-216. ISSN 19746059

Md Ghazaly, Mariam (2014) The Evaluation of a Locking Function For a Vertical Stage Electrostatic Actuator. In: 12th International Conference on Motion and Vibration Control (MOVIC 2014), 3-7 August 2014, Hokkaido, Japan.

Md Ghazaly, Mariam and Mohd Ali, Nursabilillah and Mohd Sobran, Nur Maisarah and Ab. Shukur, Syahar Azalia and Tuani Ibrahim, Ahmad Fayeez (2014) Traffic Sign Detection and Classification for Driver Assistant System. In: 8th International Conference on Robotic, Vision, Signal Processing & Power Applications, March 2014, Malaysia.

Md Ghazaly, Mariam and Tan, Aik Choon and Che Amran, Aliza and Sato, Kaiji (2014) Force Characterization of a Rotary Motion Electrostatic Actuator based on Finite Element Method (FEM) Analysis. In: International Conference on Design and Concurrent Engineeting (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.

Md Ghazaly, Mariam and Tan, Aik Choon and Che Amran, Aliza and Sato, Kaiji (2014) Force Characterization of a Rotary Motion Electrostatic Actuator based on Finite Element Method (FEM) Analysis. Applied Mechanics and Materials. pp. 1-6. ISSN Trans Tech Publications Inc., 2014

Md Isa, Ida Syafiza and Mohd Shaari Azyze, Nur Latif Azyze and Ibrahim Tuani, Ahamed Fayeez (2014) Portable Wireless Traffic Light System (PWTLS). PORTABLE WIRELESS TRAFFIC LIGHT SYSTEM (PWTLS), 03 (02). pp. 242-247. ISSN 2319-1163

Md Mustaffa, Mazlina and Shibghatullah, Abdul Samad and Basari, A.S.H and Hussin, B. (2014) Diagnosing computer hardware failures using expert system (rule-based technique). Science International-Lahore. pp. 1651-1654. ISSN 1013-5316

Md Rozali, Sahazati and RAHMAT, MOHD FUA'AD and HUSAIN, ABDUL RASHID and Kamarudin, Muhammad Nizam (2014) DESIGN OF ADAPTIVE BACKSTEPPING WITH GRAVITATIONAL SEARCH ALGORITHM FOR NONLINEAR SYSTEM. Journal of Theoretical and Applied Information Technology, 59 (2). pp. 460-468. ISSN 1992-8645

Md Rozali, Sahazati and Rahmat, Mohd Fua'ad and Husain, Abdul Rashid (2014) Performance Comparison of Particle Swarm Optimization and Gravitational Search Algorithm to the Designed of Controller for Nonlinear System. Journal of Applied Mathematics, 2014. pp. 1-9. ISSN 1110-757X

Md Saad, Mohd Shamsuri and Abdul Majid, Izaidin (2014) Employers Perceptions Of Important Employability Skills Required From Malaysian Engineering And Information And Communication Technology ICT Graduates. Global Journal of Engineering Education, 16 (3). pp. 110-115. ISSN -

Md Saad, Mohd Shamsuri and Abdul Majid, Izaidin and Jano, Zanariah and Md Nordin, Shahrina (2014) Examining The Impact Of Team Communication Practices In Innovative Research And Development R&D Teams : An Early Findings. Journal Of Educational And Social Research, 4 (4). pp. 177-184. ISSN 2239-978X

Mei Ph'ng , Lee (2014) Students' preferences and perceptions of teaching styles and learning styles in an esp context at a Malaysian Technical University. PhD thesis, UTeM.

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Prediction of Optimum Cutting Conditions in Dry Turning Operations of S45C Mild Steel using AIS and PSO Intelligent Algorithm. In: international symposium on Research in Innovation and Sustainability 2014 (ISoRIS2014), 15-16 October 2014, Malacca.

Minhat, Mohamad (2014) An Open STEP-NC Controller Via LabVIEW platform. Periodical of Applied Mechanics and Materials Vol 660 in 2014, 660 (873). pp. 1-5. ISSN 10.4028/www.scientific.net/AMM.660.873

Minhat, Mohamad and Kasim, Mohd Shahir (2014) MACHINING PARAMETERS OPTIMIZATION FOR TRIMMING OPERATION IN A MILLING MACHINE USING TWO LEVEL FACTORIAL DESIGN. In: 5th International Conference on Mechanical, Industrial and Manufacturing Technologies MIMT2014, 10-11 March 2014, Penang Malaysia. (Submitted)

Minhat, Mohamad and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. In: International Conference on Artificial Intelligence and Computer Science (AICS 2014), 15 - 16 September 2014, Bandung, Indonesia.

Minhat, Mohamad and Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. Journal of advanced Manufacturing Technology (AMT). pp. 1-8. ISSN Nil (Submitted)

Miskon, Muhammad Fahmi and Bahar, Mohd Bazli and Abu Bakar, Norazhar and Shukor, Ahmad Zaki and Ali @ Ibrahim, Fariz (2014) Path Generation Of Sit To Stand Motion Using Humanoid Robot. Australian Journal of Basic and Applied Sciences, 8 (2). pp. 168-182. ISSN 1991-8178

Miswan, Nor Hamizah and Hamzah, Khairum and Ngatiman, Nor Azazi and Zamzamir Zamzamin, Zaminor (2014) Comparative performance of ARIMA and GARCH Models in modelling and forecasting volatility of Malaysia market properties and shares. Applied Mathematical Sciences, 8 (140). pp. 7001-7012. ISSN 1312-885X

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Razak, Jeefferie and Dimin, Mohd Fairuz (2014) EFFECT OF CHITOSAN GELATINIZATION TEMPERATURE ON WATER ABSORPTION AND WATER RETENTION OF CHITOSAN BASED UREA FERTILIZER. International Journal of Automotive and Mechanical Engineering (IJAME). pp. 1-10. ISSN 2180-1606 (In Press)

Mohamad, Noraiham and Yaakub , Juliana and ABD RAZAK , JEEFFERIE and YAAKOB, MOHD YUHAZRI and Shueb, Mohammed Iqbal and Muchtar, Andanastuti (2014) Effects of Epoxidized Natural Rubber (ENR-50) and Processing Parameters on the Properties of NR/EPDM Blends Using Response Surface Methodology. Journal of Applied Polymer Science, 131 (17). 40173 (1)-40713 (8). ISSN 1097-4628

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and Teruaki, Ito and Dani , Yuniawan and Ibrahim, M. A. and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Najmiah Radiah and Yusoff, S. A. S. and Salleh, Azahari and Hashim, Nik Mohd Zarifie and Yusop, Norbayah and Misran, Mohamad Harris (2014) An Initial Development Of Simple And Low-Cost Approach For Affordable Semi-Automatic Car. International Journal for Advance Research in Engineering and Technology, 2 (XI). pp. 1-5. ISSN 2320-6802

Mohamad, Noraiham and Abd Latiff, Anisah and Ab Maulod, Hairul Effendy and Asyadi Azam, Mohd and Mohd Edeerozey, Abd Manaf (2014) A sustainable polymer composite from recycled polypropylene filled with shrimp shell waste. Polymer-Plastics Technology and Engineering, 53 (2). pp. 167-172. ISSN 1525-6111 (Submitted)

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Mohd Salleh, Mohd Khuzaimi and Azam, Mohd Asyadi and YAAKOB, MOHD YUHAZRI and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Abdollah, Mohd Fadzli bin (2014) Interaction of Mixing Factors with Mechanical Properties of PP/ENR Blend via Response Surface Methodology. Journal of Mechanical Engineering, 11 (1). pp. 1-13. ISSN 1823-5514

Mohamad, Nur Syuhada and Hussin, Burairah and Shibghatullah, Abdul Samad and Basari, A.S.H (2014) Banknote authentication using artificial neural network. Science International. pp. 1865-1868. ISSN 1013-5316

Mohamad, Siti Hajar and Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Abdul Majid, Izaidin (2014) Customer Relationship Management Practices : The Impact On Organisational Performance In Smes Of Food Manufacturing Industry. European Journal of Business and Management , 6 (13). pp. 35-48. ISSN 2222-1905

Mohamad, Siti Hajar and Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Abdul Majid, Izaidin (2014) Customer Relationship Management Practices : The Impact On Organizational Performance In SMES Of Food Manufacturing Industry. European Journal of Business and Management , 6 (13). pp. 35-48. ISSN 2222-1905

Mohamad, Siti Hajar and Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Abdul Majid, Izaidin (2014) The Impact Of Customer Relationship Management (CRM) Processes Towards Business Performance. International Journal of Research in Management, 5 (4). pp. 11-24. ISSN 2249-5908

Mohamad, Siti Hajar and Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Abdul Majid, Izaidin (2014) The Impact Of Customer Relationship Management (CRM) Processes Towards Business Performance. International Journal of Research in Management, 4 (5). pp. 11-24. ISSN 2249-5908

Mohamad, Siti Hajar and Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Abdul Majid, Izaidin and Kamarudin, Mohd Fauzi (2014) The Impact Of Customer Relationship Management On Small And Medium Enterprises Performance. Journal of Technology Management and Technopreneurship, 2 (2). pp. 11-26. ISSN 2231-7996

Mohamad Asmadi , Ahmad (2014) An investigation of sodium silicate added malaccan red clay for slip casting process. Masters thesis, UTeM.

Mohamad Fadli , Saidin (2014) Back end process yield improvement by verification of seeder bulk erase quality for 3.5" reowrk hard disk drive. Masters thesis, UTeM.

Mohamad Firdaus, Ghazali (2014) Network entry phase optimization for WIMAX network. Masters thesis, UTeM.

Mohamad Hashim, Ummi Kalsom and Asmala, A. (2014) THE EFFECTS OF TRAINING SET SIZE ON THE ACCURACY OF MAXIMUM LIKELIHOOD, NEURAL NETWORK AND SUPPORT VECTOR MACHINE CLASSIFICATION. Science International-Lahore, 26 (4). pp. 1477-1481. ISSN 1013-5316

Mohamad Isa, Mohd Sa'ari and Azmi, Aini Noor Liana and Azmi , Awang Md Isa and Md Saat, Mohd Shakir and Abu, Maisarah and Ahmad, Azlinda (2014) Wearable Textile Antenna On Electromagnetic Band Gap (EBG) For Wlan Applications. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 6 (2). pp. 51-58. ISSN 2180-1843

Mohamad Isa, Mohd Sa'ari and Langley, Joe and Khamas, S and Mohd Zin, Mohd Shahril Izuan and Zakaria, Zahriladha and Haron, Nor Zaidi and Ahmad, Azhar (2014) A Technique Of Scan Blindness Elimination For Planar Phased Array Antenna Using Miniaturized EBG. Jurnal Teknologi, 69 (2). pp. 11-15. ISSN 2180–3722

Mohamad Jaya, Abdul Syukor and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Muhd. Razali and Hasan Basari, Abd Samad and Abd. Rahman, Md. Nizam (2014) Modeling of TiN Coating Thickness Using RSM Approach. Key Engineering Materials, 594-59 (2014). pp. 556-560. ISSN 1662-9795

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2014) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. Advanced Materials Research. pp. 779-845. ISSN 10.4028/www.scientific.net/AMR.845.779

Mohamed Aminuddin, Mai Mariam (2014) The effect of different levels of continuous tones vibrant on focus ability in teenagers. 2014 . pp. 454-457. ISSN 1992-8645

Mohammed Rasheed, Jubair (2014) A Comparative Study Of Diode-Clamped And Cascaded H-Bridge In Multilevel Inverter For Harmonic Reduction. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamood, Nadzrie and Hashim, Nik Mohd Zarifie and Aziz, Khairul Azha A (2014) Sliding window for Radial Basis Function Neural Network face detection. International Journal of Science and Engineering Applications , 3 (4). pp. 94-97. ISSN 2319-7560

Mohd , Hadzley and Nurul , Fatin and Raja, Izamshah and Hussein, Nur Izan Syahriah and Siti, Sarah and Sivarao, Subramonian (2014) Surface Integrity of a High Speed Milling FC300 Gray Cast Iron. Applied Mechanics and Materials. pp. 642-646. ISSN 1660-9336

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Noraiham (2014) Electrode Fabrication and Electrochemical Analysis of AC/Graphene-Based Electrochemical Capacitor in 1 M H2SO4. Advanced Science, Engineering and Medicine, 6. pp. 1-4. ISSN 2164-6627

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and raja seman, raja noor amalina (2014) Designing Supercapacitor from Nanocarbon Materials. In: Design and System Division Conference, 17-19 September 2014, Tokushima University, Japan.

Mohd Abid, Mohd Asyadi Azam and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Abd Rashid , Mohd Warikh (2014) An overview of selected catalytic chemical vapor deposition parameter for aligned carbon nanotube growth. Nanoscience & Nanotechnology-Asia, 4. pp. 2-30. ISSN 2210-6820

Mohd Abid, Mohd Asyadi Azam and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Mohamad, Effendi (2014) Aligned Carbon Nanotube Growth from Chemical Vapor Deposition. In: Design and System Division Conference, 17-19 September 2014, Tokushima University.

Mohd Abid, Mohd Asyadi Azam and Talib, Elyas and Mohamad, Noraiham and Kasim, Mohd Shahir and Abd Rashid , Mohd Warikh (2014) Mechanical and Thermal Properties of Single-Walled Carbon Nanotube Filled Epoxidized Natural Rubber Nanocomposite. Journal of Applied Sciences, 14 (18). pp. 2183-2188. ISSN 1812-5654

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2014) Parametric Study of Spin Coating Technique to Prepare Catalyst Nanoparticles. In: Design and System Division Conference, 17-19 September 2014, Tokushima University, Japan.

Mohd Amran, Md Ali and Mohd Faizal, Khalik (2014) Effect of injection moulding process parameters on plastic part quality in transparent glass mould. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Mohd Amran, Md Ali and Raja, Izamshah and Nur Izan Syahriah, Hussein and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Mohd Rizal, Salleh and Effendi , Mohamad and Sivarao, Subramonian and Pay Jun, Liew and Zulkeflee, Abdullah (2014) Performance of Wire-EDM Parameters on Machining Characteristics of Titanium Alloy (Ti6Al4V) using Taguchi Method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

Mohd Annuar, Khalil Azha and Ismail, Fatimah Sham (2014) Optimal Pin Fin Arrangement of Heat Sink Design and Thermal Analysis for Central Processing Unit. In: Intelligent and Advanced Systems (ICIAS), 2014 5th International Conference, 3-5 June 2014 , KLCC Kuala Lumpur.

Mohd Annuar, Khalil Azha and Ismail, Fatimah Sham (2014) Thermal Performance Of Pin Fin Arrangement Of Heat Sink Design For Electronic Central Processing Unit. In: 1st Mini Symposium on Artificial Intelligence and Robotics, 11 December 2013, Centre for Artificial Intelligence and Robotics (CAIRO), Universiti Teknologi Malaysia. (Submitted)

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah (2014) ROV Trainer Kit for Education Purposes. International Journal of Science and Research (IJSR), 3 (5). pp. 1-7. ISSN 2319-7064

Mohd Aras, Mohd Shahrieel and Abdullah, Shahrum Shah and Abdul Rahman, Ahmad Fadzli Nizam and Abd Azis, Fadilah and Hasim, Norhaslinda and Lim , Wee Teck and Mohd Nor, Arfah Syahida (2014) Depth control of an unmanned underwater remotely operated vehicle using neural network predictive control. In: The 5th International Conference on Underwater System Technology : Theory and Application (USYS'14), 3-4 December 2014, Bayview Hotel Melaka.

Mohd Asri , Yusuff (2014) Penilaian taburan hayat lesu komponen automotif dengan bebanan ekstrem melalui pendekatan ciri hayat taburan dan fungsi keboleharapan. PhD thesis, UTeM.

Mohd Asyadi ‘Azam Mohd Abid (2014) Graphene Electrode Super Capacitor And Method To Manufacture Thereof. PI 2014703512.

Mohd Azhar , Ahmad (2014) Effect of activation conditions on the pinang frond based activated carbon performance in dyes removal. Masters thesis, UTeM.

Mohd Bazli , Bahar (2014) Design and development of sit-to-stand trajectory and control of humanoid robot. Masters thesis, UTeM.

Mohd Esa, Mona Riza and Ahmad, Mohd Riduan and Cooray, Vernon (2014) Occurrence of narrow bipolar pulses between negative return strokes in tropical thunderstorms. In: ICLP, 13-17 October 2014, Shanghai, China. (In Press)

Mohd Esa, Mona Riza and Ahmad, Mohd Riduan and Cooray, Vernon (2014) Time-frequency Profile of Discharge Processes Prior the First Return Stroke. In: ICLP, 13-17 October 2014, Shanghai, China. (In Press)

Mohd Ezhar , Amir Razlan Shapawi (2014) Evaluating the service quality in Faculty of Engineering UTeM. Masters thesis, UTeM.

Mohd Farid , Ismail (2014) Simulation analysis of energy saving potentials from residential HVAC systems in hot country buildings. Masters thesis, UTeM.

Mohd Firdaus , Mohd Ab Halim (2014) Grid frequency stability study. Masters thesis, UTeM.

Mohd Hafidz , Zakaria (2014) The development of active front wheel steering system. Masters thesis, UTeM.

Mohd Hafiedzzul , Malek Riduan (2014) Mechanical properties of recycled polypropylene (rPP) processed by injection molding method. Masters thesis, UTeM.

Mohd Hafiz, Zani and Halim, Isa and Muhammad Syafiq, Syed Mohamed (2014) The effects of roller conveyor on muscle activity in workpiece loading on CNC machining centre: a preliminary study. Applied Mechanics and Materials, 761. pp. 673-677. ISSN 1662-7482

Mohd Hafiz , Taib (2014) Design and development of mobile robot thematic mapping using flexible ellipse shape region. Masters thesis, UTeM.

Mohd Husin, Mohd Haizal and Mohd Ridzuan, Nordin and Imran Syakir, Mohamad and liew, kong yong (2014) Pt–Cu bimetallic nanoparticles synthesized by polyol method under different reduction conditions. Journal of Mechanical Engineering and Technology. pp. 77-86. ISSN 2180-1053

Mohd Ibrahim, Imran and Abdul Rahman, Tharek and Sabran, Mursyidul Idzam and Mohd Faizal, Jamlos (2014) Bandwidth Enhancement through Slot Design on RLSA Performance. In: IEEE Region 10 Technical Symposium, 14-16 April 2014, Kuala Lumpur.

Mohd Johar, Fauzi and Azmin, Farah Ayuni and Shibghatullah, A. S. and Suaidi, Mohd Kadim and Ahmad, Badrul Hisham and Salleh, Siti Nadzirah and Abd Aziz, M. Z. A and Md Shukor, Mahfuzah and Liew, Voon Bin and Wong, Wei Yang (2014) Application of Genetic Algorithm for the Optimization of Energy Saving Glass Coating Structure Design. Advanced Science Letters. 00. ISSN 19366612 (Submitted)

Mohd Khairuddin, Ismail and Ahmad Dahalan, Amira Sarayati and Zainal Abidin, Amar Faiz and Yee, Yang Lai and Nordin, Nur Anis and Siti Fatimah, Sulaiman and Jaafar, Hazriq Izzuan and Mohamad, Syahrul Hisham and Amer, Noor Hafizah (2014) Modeling and Simulation of Swarm Intelligence Algorithms for Parameters Tuning Of PID Controller in Industrial Couple Tank System. Advanced Material Research, 903. pp. 321-326. ISSN 1022-6680

Mohd Khairuddin, Ismail and Ali, Abuassal and Ali, Abdelrahim and Zainal Abidin, Amar Faiz and Mohamad, Syahrul Hisham and Mutaz, Alsawi and Nordin, Nur Anis and Jaafar, Hazriq Izzuan (2014) Automatic Classification of Wood Texture using Local Binary Pattern & Fuzzy K-Nearest Neighbor. Advanced Material Research, 903. pp. 315-320. ISSN 1022-6680

Mohd Khairul Rizal , Mohd Shukor (2014) Motion error and accuracy evaluation method for CNC vertical milling machine. Masters thesis, UTeM.

Mohd Khairul Sharil , Mustaq Ahmad (2014) Green magnetite nanocomposite sheet using coprecipitation loading method as a wave absorber in RFID applications. Masters thesis, UTeM.

Mohd Khanapi, Abd Ghani and Mustafa Musa, Jaber and Suryana,, Nanna (2014) Telemedicine Supported by Data Warehouse Architecture. In: Proc. Advancement in Information Technology International Conference (ADVCIT 2014), December 16-18, Bandung, Indonesia.

Mohd Khanapi , Abd Ghani and Nuur Farhana Shatilah Zakaria N.F.S, Zakaria (2014) ANALYSIS OF EMR USER INTERFACE REQUIREMENT BY MEDICAL STUDENT. Journal of Theoretical and Applied Information Technology. 0-0. ISSN 1992-8645

Mohd Nasir, Mohamad Na'im and Jali, Mohd Hafiz and Rashid, M. A. R. and Sulaima, Mohamad Fani and Bohari, Zul Hasrizal and Yahya, M. S. (2014) Development of Hybrid Photovoltaic-Wind System for LED Street Lighting. Advanced Materials Research, Vol. 699 (2015) (pp 583-588). pp. 583-588. ISSN 1662-8985

Mohd Nasir, Mohamad Na'im and Shahrin, Nor Mazura and Bohari, Zul Hasrizal and Sulaima, Mohamad Fani and Hassan, Mohammad Yusri (2014) A distribution network reconfiguration based on PSO: considering DGs sizing and allocation evaluation for voltage profile improvement. In: 2014 IEEE Student Conference on Research and Development (SCOReD), 16-17 Dec 2014, Pulau Pinang, Malaysia.

Mohd Nasir, Mohamad Na'im and Shahrin, Nur Mazura and Sulaima, Mohamad Fani and Jali, Mohd Hafiz and Baharom, Mohamad Faizal (2014) Optimum Network Reconfiguration and DGs Sizing With Allocation Simultaneously by Using Particle Swarm Optimization (PSO). International Journal of Engineering and Technology (IJET). pp. 773-780. ISSN 0975-4024

Mohd Nasir, Haslinah and Mohamed Aminuddin, Mai Mariam (2014) The Design Of Self Starting Regulator Using Step-Up Converter Topology For WSN Application. WSEAS Transactions On Circuits And Systems, 13. pp. 291-295. ISSN 1109-2734

Mohd Nasir, Haslinah and Mohamed Aminuddin, Mai Mariam (2014) Efficient Low Voltage Amplification Using Self Starting Voltage Regulator For Storage System. International Journal Of Engineering And Technology (IJET), 6 (5). pp. 2465-2471. ISSN 2319-8613

Mohd Nasir, Mohamad Na'im and Aziz, Muhammad Nasiruddin and Bohari, Zul Hasrizal and Jaafar, Hazriq Izzuan and Jali, Mohd Hafiz and Nor, Mohd Khanapiah (2014) Bus Stand Lamp Using Piezoelectric Energy. The International Journal of Engineering And Science. pp. 41-45. ISSN 2319 – 1813

Mohd Nasir, Mohamad Na'im and Mohd Farith, Mashitah and Jamri , Mohd Saifuzam and Jali, Mohd Hafiz and Jaafar, Hazriq Izzuan and Sulaima, Mohamad Fani (2014) Development of Automatic Load-Shedding Strategy for Stand-Alone Photovoltaic System. International Journal of Applied Engineering Research, 9 (20). pp. 6895-6906. ISSN 0973-4562

Mohd Nasir, Mohamad Na'im and Yusoff, Ahmad Bustamam and Bohari, Zul Hasrizal and Sulaima, Mohamad Fani and Wan Daud, Wan Mohd Bukhari and Ramani, Anis Niza (2014) Development of hybrid PV wind harvesting energy for electric vehicles. International Journal of Applied Engineering Research, 9 (21). pp. 8799-8810. ISSN 0973-4562

Mohd Nurul Al-Hafiz , Sha'abani (2014) Hierarchical self organizing map and focusing inspection strategy for mobile robot novelty detection. Masters thesis, UTeM.

Mohd Radzi, Muhamad Haffiz and Kok, Swee Leong (2014) Investigation of the piezoelectric charge coefficient d33 of thick-film piezoelectric ceramics by varying poling and repoling conditions. In: International Conference on Mathematics, Engineering & Industrial Applications, 28th-30 May 2014, The Gurney Resort Hotel & Residences Penang, Malaysia.

Mohd Rasip, Norhayati and Basari, A.S.H and Hussin, Burairah and Ibrahim, N. K. (2014) A Guided Particle Swarm Optimization Algorithm for Nurse Scheduling Problem. Applied Mathematical Sciences. pp. 5625-5632. ISSN 1312-885X

Mohd Rasip, Norhayati and Basari, A.S.H and Ibrahim, N. K. and Hussin, Burairah (2014) Enhancement of Nurse Scheduling Steps Using Particle Swarm Optimization. In: 1st International Conference on Communication and Computer Engineering, 20-21 MAY 2014, KING HOTEL, MELAKA.

Mohd Riduan , Ahmad and Mona Riza , Mohd Esa and Cooray, Vernon and Dutkiewicz, Eryk (2014) Interference from cloud-to-ground and cloud flashes in wireless communication system. Electric Power Systems Research. pp. 1-20. ISSN 0378-7796 (In Press)

Mohd Riduan , Ahmad (2014) Interaction of lightning flashes with wireless communication networks: special attention to narrow bipolar pulses. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rizal, Alkahari (2014) Consolidation Behavior Of Metal Power In Additive Manufacturing. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rizuan, Ngah (2014) Evaluation of used plaster of paris recyclebility for mould making. Masters thesis, UTeM.

Mohd Rosli, Mohd Afzanizam and Misha, Suhaimi and Sopian, Kamaruzzaman and Mat, Sohif and Sulaiman, M. Yusof and Salleh, Elias @ Ilias (2014) Parametric Analysis on Heat Removal Factor for a Flat Plate Solar Collector of Serpentine Tube. World Applied Sciences Journal. pp. 184-187. ISSN 1818-4952

Mohd Rosli, Mohd Afzanizam and Misha, Suhaimi and Sopian, Kamaruzzaman and Mat, Sohif and Sulaiman, M. Yusof and Salleh, Elias @ Ilias (2014) The effects of thermal conductivity on photovoltaic thermal collector sheet in tube type. World Applied Sciences Journal, 31 (4). pp. 625-629. ISSN 1818-4952

Mohd Rosli, ZULKIFLI and Mahamud, zainab and Wai Loon, Kwan and Jariah, Mohamad Juoi and Lau, K.T. (2014) Chemical Composition Analysis of TiAlBN Nanocomposite Coating Deposited via RF Magnetron Sputtering. Key Engineering Materials. pp. 551-555. ISSN 1013-9826

Mohd Rosli, ZULKIFLI and Pauline, lim and Nafarizal, nayan and Zainizan, sahdan and samsul haimi, dahlan and zuhairah, zainal abidin and yusuf, ismail and fauziahanim, che seman and mohd kadim, suadi and mohd fauzi, johar and Jariah, Mohamad Juoi and ghaffer, kiani (2014) Optimization of transmission lost for energy saving glass with different sheet resistance values. Advanced Materials Research. pp. 233-236. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and halim, z and azizi, mat yajid and ali, R (2014) Investigation of Intermetallic Phase Formation and Structural Analysis in Annealed Al/Cu Bilayer Thin Films. Advanced Materials Research. pp. 221-225. ISSN 1022-6680

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Sharif, Mohd Khairul Anuar and Sopian, Kamaruzzaman and Sulaiman, M. Yusof and Salleh, Elias @ Ilias (2014) Collector Efficiency of the Polymer Solar Collector. Advances in Environmental Biology. pp. 2583-2588. ISSN 1995-0756

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Sopian, Kamaruzzaman and Sulaiman, M. Yusof and Salleh, Elias @ Ilias and Sharif, Mohd Khairul Anuar (2014) Thermal Performance on Unglazed Photovoltaic Thermal Polymer Collector. Advanced Material Research, 911. pp. 238-242. ISSN 1022-6680

Mohd Ruddin Ab Ghani (2014) Remote Terminal Unit. PI 2014703495.

Mohd Rusdy , Yaacob (2014) Study of the performance of XBee modules’ communication in clear line of sight with different mounting elevations in viral advertisement system. In: International Conference on “Multidisciplinary Trends In Academic Research” 2014, 29-30 September 2014, Holiday Inn Silom, Bangkok.

Mohd Rusdy , Yaacob and Lim , Wee Teck and Nik Anwar, Nik Syahrim (2014) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. Advanced Materials Research. pp. 303-308. ISSN 1662-8985

Mohd Rusdy , Yaacob and Miskon, Muhammad Fahmi and Chan, Xin Zhi (2014) Study on the Accuracy of Tree’s Diameter Measurement by Laser Range Finder System. In: national conference on agricultural and food mechanization 2014, 20 - 22 May 2014, sutera Harbour Resort, Kota Kinabalu.

Mohd Saad, Hamid (2014) Centralized Database System For Automated Hearing Screening. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Saad, Norhashimah and Abu-Bakar, Syed A.R. and Muda, A.F. and Muda, Sobri and Ahmad Radzi, Syafeeza (2014) Automatic Brain Lesion Detection And Classification Based On Diffusion-Weighted Imaging Using Adaptive Thresholding And A Rule-Based Classifier. International Journal of Engineering and Technology (IJET), 6. pp. 2685-2697. ISSN 0975-4024

Mohd Saad, Wira Hidayat and Abd Salam, Nurul Akmal and Tan, Kien Leong and Baharom, Siti Nor Atikah (2014) Verification Of Heart Rate Monitor Using PPG Pulse Sensor. International Journal of Applied Engineering Research, 9 (24). pp. 24369-24378. ISSN 0973-4562

Mohd Shahir, Kasim (2014) Prestasi Perkakas Pemotong Karbida Bersalut Semasa Pengisaran Inkonel 718 Dalam Keadaan Kuantiti Pelincir Minimum. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shakir , Md Saat (2014) A development of class e converter circuit for loosely coupled inductive power transfer system. WSEAS TRANSACTIONS on CIRCUITS and SYSTEMS , 13 (-). pp. 422-428. ISSN E-ISSN: 2224-266X

Mohd Shamsuri, Md Saad and Mazzarol, Tim (2014) Enhancing And Sustaining Organizational Innovative Performance Through Transformational Leadership. Science International (Lahore), 26 (5). pp. 1767-1722. ISSN 1013-5316

Mohd Yunos , Ali (2014) Improving frequency and ROCOF accuracy during faults, for P class phasor measurement units. PhD thesis, University of Strathclyde.

Mohd Zaid, Akop (2014) Characteristics Of Impingement Diesel Spray Adhesion On A Flat Wall. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zaidan, Abdul Aziz (2014) Electrosynthesis And Characterizations Of NiTe2 Thin Films For Photoelectrochemical (PEEC)Cell. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zaini, Jamaludin and Safarudin Gazali , Herawan and Yusmady , Mohamed Arifin and Fauzi, Ahmad (2014) Performance Comparison Between Diesel Fuel And Biodiesel Using A Low Cost Single Cylinder Diesel Engine Dynamometer. Applied Mechanics And Materials, 554. 505 - 509. ISSN 1662-7482

Mohd Zaki , Yusup and Wan Hasrulnizzam , Wan Mahmood and Mohd Rizal , Salleh and Mohd Razali , Muhamad (2014) The sustainability challenges in the adoption of cleaner production system: a review. Jurnal Teknologi, UTM, 70 (1). pp. 117-123. ISSN 0127-9696

Mohd Zamberi, Mahanum and ANI, FARID NASIR and Herawan, Safarudin Gazali (2014) The effects of alkaline catalysts in used frying oil biodiesel on the diesel engine performances. Applied Mechanics and Materials, 554. pp. 449-453. ISSN 1662-7482

Mohd Zin, Mohd Shahril Izuan and Awang Md Isa, Azmi and Mohamad Isa, Mohd Sa'ari (2014) Portable fingerprint-based attendance recording and monitoring system. International Journal of Computer Science and Mobile Computing, 3 (12). pp. 397-409. ISSN 2320–088X

Mohd. Chachuli, Siti Amaniah and Fasyar, Puteri Nor Aznie and Soin, Norhayati and MohammadKarim, Nissar and Yusop, Norbayah (2014) Pareto ANOVA Analysis for Two-Stage Op-amp by using CMOS 0.18 µm. Materials Science in Semiconductor Processing. pp. 9-14. ISSN 1369-8001

Mona Riza , Mohd Esa and Mohd Riduan , Ahmad and Mahbubur , Rahman and Cooray, Vernon (2014) Distinctive features of radiation pulses in the very first moment of lightning events. Journal of Atmospheric and Solar-Terrestrial Physics. pp. 1-19. ISSN 1364-6826 (In Press)

Mu'ath Ibrahim Mohammad Jarrah , Mohammad Jarrah (2014) Optimization of physical vapour deposition coating process parameters using genetic algorithm. Masters thesis, UTeM.

Muda, A. K. (2014) Computational Intelligence in Digital Forensics. In: Computational Intelligence in Digital Forensics. Springer, pp. 1-16.

Muda, A. K. and Choo, Yun Huoy and Muda, N. A. (2014) A New Swarm-Based Framework for Handwritten Authorship Identification in Forensic Document Analysis. In: Computational Intelligence in Digital Forensics. Springer, pp. 385-411.

Muhamad, Khairil Amri and Hashim, Nik Mohd Zarifie and Wan Azman, Wan Mohd Syahmi and Mohamad, Nor Hafiza (2014) Digital Images Restoration Application In Digital Signal Processing. International Journal of Emerging Technology & Research, 1 (6). pp. 79-83. ISSN 2347-6079

Muhamad Khairi, Aripin and Yahaya, Md. Sam and Kumeresan, A.D and Kemao , Peng and Norhazimi , Hamzah and Muhamad Fahezal, Ismail (2014) A Review of Active Yaw Control System for Vehicle Handling and Stability Enhancement. International Journal of Vehicular Technology, 2014. pp. 1-15. ISSN 1687-5710

Muhammad, Waseem (2014) Optimization of cutting parameters to reduce cutting tool temperature in a dry turning process using genetic algorithm. Masters thesis, UTeM.

Muhammad Hafiz, Ahmad Sohan (2014) The effect of load distribution towards the line following performance of two wheel driven mobile robot. Masters thesis, UTeM.

Muhammad Hazwan , Arzmi (2014) Improving die exchange process in textile manufacturing company with single minute exchange of die (SMED). Masters thesis, UTeM.

Muhammad Idzdihar , Idris and Nowshad , Amin and Faiz , Arith and Siti Amaniah, Mohd Chachuli (2014) Deposition of Micro Contact Based Probe Cell for IC Testing by Dc Magnetron Sputtering Technique. Research Journal of Applied Sciences, Engineering and Technology. pp. 2701-2704. ISSN 2040-7459

Muhammad Idzdihar , Idris and Nowshad, Amin and Puvaneswaran, Chelvanathan and Arith, Faiz (2014) Thickness Dependence of The Surface Roughness of Micro Contact Deposited By Dc Magnetron Sputtering Technique. Australian Journal of Basic and Applied Sciences. pp. 91-95. ISSN 1991-8178

Muhammad Nizam , Kamarudin and Abdul Rashid , Husain and Mohamad Noh , Ahmad (2014) Variable speed wind turbine with external stiffness and rotor deviation observer. Applied Mechanics and Materials, 661. pp. 154-159. ISSN 1660-9336

Muhammad Nizam , Kamarudin and Abdul Rashid , Husain and Mohamed Noh , Ahmad (2014) Robust bounded control for uncertain nonlinear systems: application to a nonlinear strict feedback wind turbine model with explicit wind speed dynamics. Journal of Theoretical and Applied Information Technology, 63 (3). pp. 718-732. ISSN 1992-8645

Muhd Ridzuan , Mansor (2014) Concurrent conceptual design of hybrid natural/glass fiber reinforced thermoplastic composites for automotive parking brake lever. PhD thesis, Universiti Teknikal Malaysia Melaka.

Muhyiaddin Abdul Qadir , Abu Bakar (2014) The degradation study of PVC/ABS and PVC/ABS/Carbon blends during repeated extrusion on mechanical and thermal properties. Masters thesis, UTeM.

Muliati , Sedek (2014) Factors influencing utilisation of ubiquitous technology among undergraduates in Malaysian technical universities. PhD thesis, UTeM.

Munawar, Rose Farahiyan and Shahril, M. Khairul and Abu, Maisarah and Bani Hashim, Ahmad Yusairi (2014) Green Magnetic Wave Absorber, The Potential Of Paddy Straw And Recycled Paper. Materials Research Innovations, 18. S6-21. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

Musa, Haslinda (2014) Analyzing factors towards adopting ICT within supply network in the UK. Journal of Technology Management and Technopreneurship (2). pp. 19-36. ISSN 2231-7996

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Noritsugu, Umehara (2014) Materials Selection for Eco-Aware Lightweight Friction Material. Mechanics & Industry. pp. 279-285. ISSN 2257-7777

Mustafa, Nur Hanim and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Malek, F (2014) Energy Monitoring Based On Human Activity In The Workplace. Journal Of Physics : ConferenceSeries, 495 (-). pp. 1-9. ISSN -

Mustafa, Nur Hanim and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Malek, F (2014) A Survey On Human Behavior Towards Energy Efficiency For Office Worker In Malaysia. Journal Of Physics : ConferenceSeries, 495 (-). pp. 1-10. ISSN -

Musthafah, Mohd Tahir and Salim, M.A. and Herawan, Safarudin Gazali and Bakar, R.A. (2014) Feasibility Study for Energy Recovery from Internal Combustion Engine's Waste Heat. International Review of Mechanical Engineering, 8 (1). pp. 223-227. ISSN 1970-8734

Musthafah, Mohd Tahir and Ali, Muhammad Syahir and Mohd Shafie, Abdul Muhaimin and Bakar, R.A. (2014) Simulation of Single Cylinder Engine Fuel with Alternative Fuel by Using Available Software. International Review of Mechanical Engineering, 8 (4). pp. 798-802. ISSN 1970-8734

Musthafah, Mohd Tahir and Mohd Shafie, Abdul Muhaimin and Ali, Muhammad Syahir and Yusmady, Mohamed Arifin and Abu Bakar, Rosli (2014) INTAKE ANALYSIS ON FOUR-STROKE ENGINE USING CFD. In: International Conference on Automotive Innovation and Green Energy Vehicle 2014, 26 -27 August 2014, Swiss Garden Resort & Spa, Kuantan, Pahang. (Submitted)

Mutalib, Mohamad Ariffin and Zakaria, Zahriladha and Sam, Weng Yik and Awang Md Isa, Azmi (2014) Simulation And Analysis Of Compact Defected Microstrip Structure (DMS) With Narrow Bandwidth Notch Characteristics. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 6 (2). pp. 1-4. ISSN 2180-1843

mohd sabri, noramalina and Basari, A.S.H and Hussin, Burairah and Abu Samah, Khyrina Airin Fariza (2014) Simulation Method of Shortest and Safest Path Algorithm for Evacuation in High Rise Building. Applied Mathematical Sciences. pp. 5163-5172. ISSN 1312-885X

N

N., Mamat and Kasrul, Abdul Karim and Zulkifilie, Ibrahim and Siti Azura, Ahmad Tarusan (2014) Design And Analysis Of Bearingless Permanent Magnet Synchronous Motor. International Journal Of Energy And Power Engineering Research (IJEPER), 2. pp. 11-16. ISSN 2289-5620

N. M., Nor and Hashim, Nik Mohd Zarifie and S. N., Rosli and Mohamad Zoinol Abidin, Abd Aziz (2014) A Study On Application Digital Filtering For Audio Signal Processing In Digital Signal Processing. International Journal of Emerging Technology & Research, 1 (6). pp. 56-61. ISSN 2347-6079

Nasiru , Garba Noma (2014) Identification model for hearing loss symtoms using machine learning techniques. PhD thesis, UTeM.

Nasroddin, Saidatul Nizan and Mohd Mokji, Musa and Tan, Kok and Zainal Abidin, Amar Faiz and Amirulah, Rahman and Nordin, Nur Anis and Hasim, Saipol Hadi and Zakaria, Hamzah and Hassan, Jefery and Jaafar, Hazriq Izzuan and Khairuddin, Osman (2014) Application of Particle Swarm Optimization in Optimizing Stereo Matching Algorithm’s Parameters for Star Fruit Inspection System. In: International Conference Recent treads in Engineering & Technology (ICRET’2014), 13-14 Feb 2014, Batam (Indonesia).

Nazrulazhar, Bahaman (2014) Pengesanan pencerobohan trafik penerowongan IPV6 berasaskan rangkaian neural perambatan balik. Masters thesis, UTeM.

Ng, Guan Yao (2014) Characterization Of Oil Retrogression Of Aluminum Alloy 7075. Masters thesis, Universiti Teknikal Malaysia Melaka..

Nik Azran , Ab Hadi (2014) Development Of High Performance And Low Cost Automatic Toll Payment System Using Rfid Technology For Malaysia Environment. International Journal For Advance Research In Engineering And Technology, 2. pp. 1-7. ISSN 2320-6802

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Zahriladha, Zakaria and Wong, Peng Wen (2014) An Overview Of Matched Bandstop Filters Using Lossy Resonators. Australian Journal of Basic and Applied Sciences, 8. pp. 135-144. ISSN 1991-8178

Noor Ropidah, Bujal (2014) Analysis Of Voltage Stability Problems In Power System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Noorazilah , Mohamed (2014) Multiple intelligence in employability among Universiti Teknikal Malaysia Melaka management graduates. Masters thesis, UTeM.

Noorazuan, M. H. and Shamsuddin , Man and Rohimi, Shapiee and Asmala, A. (2014) Thermal Anomaly, Heat Index And Urban Heat Island During The Hajj Season In Saudi Arabia. Geografia - Malaysian Journal of Society and Space , 10 (5). pp. 56-70. ISSN 2180-2491

Noorhazirah, Sunar and Mohd Fua'ad , Rahmat and Zool Hilmi, Ismail and Ahmad 'Athif , Mohd Faudzi and Syed Salim , Syed Najib (2014) Model Identification And Controller Design For An Electro-Pneumatic Actuator System With Dead Zone Compensation. INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, 7 (2). pp. 798-817. ISSN 1178-5608

Nooririnah, Omar (2014) ISU-ISU KONTEMPORARI PEMIKIRAN DAN KEPIMPINAN MELAYU. In: ISU-ISU KONTEMPORARI PEMIKIRAN DAN KEPIMPINAN MELAYU. Dewan Bahasa dan Pustaka, pp. 1-102. (Submitted)

Nooririnah, Omar (2014) KEUTUHAN PERPADUAN MELAYU DALAM ARUS MODENISASI. In: KEUTUHAN PERPADUAN MELAYU DALAM ARUS MODENISASI. dewan bahasa dan pustaka, pp. 1-126. (Submitted)

Nooririnah, Omar and muhamad azwar, azhari and Umar , Al-amani and Yusliza, Yusuf and Mohd faiz , wahid (2014) INFLUENCE OF CALCIUM HYDROXIDE CONCENTRATION ON THE SYNTHESIS NANOSIZED PRECIPITATED CALCIUM CARBONATE. In: 8th MUCET 2014, 10-11 November 2014, Melaka.

Nor Afandi , Sharif (2014) The influence of gas metal arc welding on angular distortion of T-joint. Masters thesis, UTeM.

Nor Asmaa Alyaa , Nor Azlan (2014) Reorganizing dispatching layout to minimize dispatching time at apparel industry. Masters thesis, UTeM.

Nor Rabbiatun , Mohamed Nazri (2014) A completeness evaluation of patient records in medical tourism using completeness evaluation tool. Masters thesis, UTeM.

Nor Safura , Nordin (2014) Process-properties relationship of mild steel orbital welding. Masters thesis, UTeM.

Norasiken, Bakar and Faridah Hanim, Yahya (2014) Matematik: program khas integrasi masalah pembelajaran spesifik disleksia : tahap 1,tahun 1,2 dan 3. Penerbit Universiti Teknikal Malaysia Melaka, Melaka. ISBN 9789670257228

Norazira, A Jalil and Basari, A.S.H and Salam, S. and Ibrahim, N. K. and Norasikin, Mohd Adili (2014) The Utilization of Template Matching Method for License Plate Recognition: A Case Study in Malaysia. In: 1st International Conference on Communication and Computer Engineering, 20-21 MAY 2014, KING HOTEL, MELAKA.

Norazira, A Jalil and Basari, A.S.H and Salam, S. and Ibrahim, N. K. (2014) The Utilization of Template Matching Method for License Plate Recognition. International Review on Computers and Software (I.RE.CO.S.). pp. 384-389. ISSN 18286003

Norazura , Md Nor (2014) Inverse PHI slotted antenna design for RFID application. Masters thesis, UTeM.

Nordin, Khairussakinah and Hashim, Nik Mohd Zarifie and Idris, Suhana and Darsono, Abdul Majid and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Coherent Optical Communication Systems In Digital Signal Processing. International Journal of Advanced Engineering Research and Technology (IJAERT), 2 (7). pp. 228-232. ISSN 2348-8190

Nordin, Nurdiana and Sheng, Quan Xie and Wünsche, Burkhard (2014) Assessment Of Movement Quality In Robot- Assisted Upper Limb Rehabilitation After Stroke:A Review. JOURNAL OF NEUROENGINEERING AND REHABILITATION, 11. p. 23. ISSN 1743-0003

Norhidayah, Hashim and Kamat, Seri Rahayu and Isa, Halim and Mohd Shahrizan, Othman (2014) A Study on Push-Pull Analysis Associated with Awkward Posture among Workers in Aerospace Industry. International Journal of Research in Engineering and Technology. pp. 233-239. ISSN 2319-1163

Norhidayah, Hashim and Seri Rahayu , Kamat and Isa, Halim and Mohd Shahrizan, Othman (2014) A study on push-pull analysis associated with awkward posture among workers in aerospace industry. International Journal of Research in Engineering and Technologye, 3 (1). pp. 233-239. ISSN ISSN: 2319-1163

Norida, Abdullah and Aida Nasirah, Abdullah and Zanariah, Jano and Zawiah , Mat and Hanipah , Hussin and Sharif, Mustaffa (2014) The Relationship Between Self-Knowledge, Occupational Exploration And Career Decision-Making Among Undergraduates. Science International (Lahore), 26 (4). pp. 1591-1594. ISSN 1013-5316

Norihan , Abdul Hamid (2014) Pam mikro terma pneumatik dengan aktuator membran filem nipis polimid untuk kegunaan bioperubatan. PhD thesis, UTeM.

Norlezah, Hashim (2014) Optimization Parameter For Mpeg-4 Data Over Wireless Sensor Network. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Aidawaty , Rafan and Zamberi, Jamaludin and Tsung , Heng Chiew and Lokman , Abdullah and Mohd Nazmin , Maslan (2014) Quadrant glitch analysis for ball screw driven positioning stage using friction compensation model feedforward. In: International Symposium on Research in Innovation and Sustainability 2014, 15-16 October 2014, Universiti Teknikal Malaysia Melaka. (In Press)

Nur Azman, Abu and Ferda, Ernawan (2014) Psychovisual Threshold On Large Tchebichef Moment For Image Compression. Applied Mathematical Sciences, 8 (140). pp. 6951-6961. ISSN 1314-7552

Nur Azman , Abu and Prajanto Wahyu, Adi and Othman, Mohd (2014) Robust Digital Image Steganography Within Coefficient Difference On Integer Haar Wavelet Transform. International Journal Of Video & Image Processing And Network Security, 14 (2). pp. 1-8. ISSN 2227-2712

Nur Fawwaz, Asri (2014) Cladding process using gas metal arc welding as a heat source and 308L stainless steel wire as feedstock. Masters thesis, UTeM.

Nur Huda , Mohd Amin (2014) Modelling and control of inverted pendulum on the rotating disc. Masters thesis, UTeM.

Nur Izyan, Zulkafli and Shuhaimi, Mahadzir (2014) Exergy Analysis For Fuel Reduction Strategies In Crude Distillation Unit. Energy , 66. pp. 891-897. ISSN 0360-5442

Nuraziera , Mohd Hatta (2014) Learning chemistry using 3D approach : 3D atomic cubic. Masters thesis, UTeM.

Nurbahirah, Norddin (2014) High Voltage Insulation Surface Condition Analysis Using Time Frequency Distributions. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nurfaizey, Abdul Hamid (2014) Controlling The Spatial Deposition Of Electrospun Fibre. PhD thesis, Universiti Teknikal Malaysia Melaka.

Nurfaizey , Abdul Hamid and Stanger, Jonathan and Tucker, Nick and Buunk, Neil and Wood, Alan R. and Staiger, Mark (2014) Control of Spatial Deposition of Electrospun Fibre Using Electric Field Manipulation. Journal of engineered fibers and fabrics. pp. 155-164. ISSN 1558-9250

Nurliyana , Baharin (2014) Strategies to manage the impact of high PHEV penetration to the grid. Masters thesis, UTeM.

Nursabillilah , Mohd Ali (2014) Automatic road sign identification system with robustness to partial occlusion. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nurul A., Emran and Khushairi, N. M and Yusof, M. M. M. (2014) Database Performance Tuning Methods for Manufacturing Execution System. World Applied Sciences Journal. pp. 91-99. ISSN 1818-4952

Nurul A., Emran and Leza, F. N. M. (2014) Data Accessibility Model Using QR Code for Lifetime Healthcare Records. World Applied Sciences Journal. pp. 395-402. ISSN 1818-4952

Nurul Azyan , Amirudin (2014) Concept development of ejector jig and fixture for dipping process. Masters thesis, UTeM.

Nurul Iman, S B and Asmala, A. and Burhanuddin , M A (2014) Application of support vector machine for classification of multispectral data. In: 7th IGRSM International Remote Sensing & GIS Conference and Exhibition, 21-22 April 2014, Kuala Lumpur, Malaysia.

O

O, Rostam and SUBRAMONIAN, SIVARAO and SAID, MD RADZAI (2014) Temperature effects on urea granules process to produce paddy fertilizer using top spray fluidized bed granulator. International Journal of Enhanced Research in Science Technology & Engineering, 3 (2). pp. 232-236. ISSN 2319-7463

Omar, Norhaizat and Eng Chieh, Ong and Adam, Asrul and Hasim, Saipol Hadi and Zainal Abidin, Amar Faiz and Jaafar, Hazriq Izzuan and Zakaria, Hamzah and Jefery, Hassan and Nordin, Nur Anis and Khairuddin, Osman and Mohd Hussein, Shamsul Faisal (2014) An Experimental Study of the Application of Gravitational Search Algorithm in Solving Route Optimization Problem for Holes Drilling Process. In: International Conference Recent treads in Engineering & Technology (ICRET’2014), 13-14 Feb 2014, Batam (Indonesia).

Ong, Yee Teng and Chong , Shin Horng and Hee , Wai Keat (2014) Positioning control of XY table using 2-DOF PID controller. Applied Mechanics and Materials, 761. pp. 137-141. ISSN 1660-9336 (In Press)

Ong , Teik Kean and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Abd. Malek, Mohd Fareq (2014) Design of Wideband Monopole Antenna with CPW Feeding Technique. Advanced Science Letters, 20 (1). pp. 1-4. ISSN 1936-6612

Osman, Khairuddin and Rahmat, Mohd Fua'ad and Zainal Abidin , Amar Faiz and Mohd Khairuddin, Ismail (2014) Tracking Performances Of A Hot Air Blower System Using Different Types Of Controllers. Journal of Theoretical and Applied Information Technology. pp. 385-393. ISSN 1992-8645

Osman, Khairuddin (2014) Integrating Servo-Pneumatic Actuator with Ball Beam System based on Intelligent Position Control. Jurnal Teknologi, 69 (3). pp. 73-79. ISSN E-ISSN2180-3722

Othman, Aman (2014) Innovation Factors Influencing Performance Of Manufacturing SMEs In Malaysia. PhD thesis, Universiti Teknikal Malaysia Melaka.

Othman, Mohd Azlishah and Azman, Hazwani and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Abd Rahim, Yahaya and Che Pee @ Che Hanapi, Ahmad Naim and Motsidi, Mohamad Radzi and Othman, Mohd Fairuz Iskandar (2014) 10 Ghz Microstrip Spanar Antennas : An Experimental Analysis. Journal of Physics Conference Series, 495 (-). pp. 1-8. ISSN 1757-8981

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Ahmad Murad, Murzidah and Kamarudin, Mohd Fauzi (2014) Factors Influencing Safety Management Systems In Petrochemical Processing Plants. Journal of Technology Management and Technopreneurship, 2 (2). pp. 27-39. ISSN 2231-7996

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Ahmad Murad, Murzidah and Kamarudin, Mohd Fauzi (2014) Factors Influencing Safety Management Systems Petrochemical Processing Plants. Journal of Technology Management and Technopreneurship, 2 (2). pp. 27-39. ISSN 2231-7996

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Sallehuddin, Nur Syazwani and Kamarudin, Mohd Fauzi (2014) Safety Management Systems Implementation : A Study Utilizing In The Grounded Theory Analysis. Journal of Human Capital Development, 7 (2). pp. 11-31. ISSN 1985-7012

Othman, Norfaridatul Akmaliah and Md Saad, Mohd Shamsuri and Robani, Anidah and Abdullah, Aida Nasirah (2014) A Conceptual Framework Of The Impact Of Leadership Styles On Heterogeneous R&D Team Performance. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 26 (5). pp. 1759-1762. ISSN 1013-5316

P

Perumal, Puvanasvaran and Robert, Kerk Swee Tian and Vasu, Suresh (2014) Lean Environmental Management Integration System For Sustainability Of ISO 14001:2004 Standard Implementation. Journal of Industrial Engineering And Management, 7 (5). pp. 1124-1144. ISSN 2104-8423

Phuman Singh, A.S. and Mat Darus, I.Z. (2014) Active roll control strategy using fuzzy logic control active suspension. WSEAS transactions on systems and control, 9. pp. 566-573. ISSN 2224-2856

Poh, Kiat Ng and Ka, Xuan Chai and Shiong, Lung Leh and Meng, Chauw Bee and Qiao, Hui Boon and Saptari, Adi (2014) Applying Clockwise And Counterclockwise Torque Directions In Pinch Grips : A Descriptive Study. Applied Mechanics and Materials, 465-46 (-). pp. 1170-1174. ISSN 1660-9336

Poh, Kiat Ng and Kian, Siong Jee and Saptari, Adi and Jia, Xin Leau (2014) The Effects Of Office Equipment Familiarity In Reducing Human Errors And Accidents. Applied Mechanics and Materials, 564 (-). pp. 717-722. ISSN 1660-9336

Poh, Kiat Ng and Meng, Chauw Bee and Saptari, Adi and Mohamad, Nor Akramin (2014) A Review Of Different Pinch Technique. Theoretical Issues in Ergonomics Science, 15 (5). pp. 517-533. ISSN -

Poh, Kiat Ng and Qiao, Hui Boon and Ka, Xuan Chai and Shiong, Lung Leh and Meng, Chauw Bee and Saptari, Adi (2014) The Roles Of Shape And Size In The Pinch Effort Of Screw Knobs. Applied Mechanics and Materials, 465-46 (-). pp. 1202-1206. ISSN 1660-9336

Poh, Kiat Ng and Saptari, Adi and Jian, Ai Yeow (2014) Synthesising The Roles Of Torque And Pinch Force : A Framework. Theoretical Issues In Ergonomics Science, 15 (2). pp. 193-204. ISSN -

Poh, Kiat Ng and Saptari, Adi and Qiao, Hui Boon and Meng, Chauw Bee and Ka, Xuan Chai and Shiong, Lung Leh (2014) Pinch Effort Variations With Torque, Shape And Size, Sensation And Technique. Journal of Applied Sciences, 14 (5). pp. 401-414. ISSN 1812-5654

Pokaad, Alif Zulfakar and SAID, MD RADZAI and Ahmad, Fauzi and Kamaruddin, Mohd Nazeri (2014) Simulation on Force Tracking Control of a Magnetorheological Damper under Impact Loading. Applied Mechanics and Materials, 663. pp. 158-162. ISSN 1662-7482

Pongot, Kamil and Othman , Abdul Rani and Zakaria, Zahriladha and Suaidi, Mohamad Kadim and Hamidon, Abdul Hamid (2014) New Topology LNA Architecture Using Inductive Drain Feedback Technique For Wireless Application. TELKOMNIKA Indonesian Journal of Electrical Engineering, 12 (12). pp. 1-2. ISSN 2302-4046

Porter, Sophie and Mat Yamin, Ahmad Kamal and Aleksandrova, Svetlana and Benjamin, Stephen and Roberts, Carol A and Saul, Jonathan (2014) An Assessment of CFD Applied to Steady Flow in a Planar Diffuser Upstream of an Automotive Catalyst Monolith. SAE International Journal of Engines, 7 (4). pp. 1697-1704. ISSN 1946-3936

Prajanto, Wahyu Adi (2014) Digital Image Steganography Based On Integer Haar Wavelet Transform And Coefficient Difference. Masters thesis, Universiti Teknikal Malaysia Melaka.

Pratama, Satrya Fajri and Muda, Azah Kamilah and Choo, Yun Huoy and Muda, Noor Azilah (2014) A New Swarm Based Framework For Handwritten Authorship Identification In Forensic Document Analysis Springer. In: COMPUTATIONAL INTELLIGENCE IN DIGITAL FORENSICS : FORENSIC INVESTIGATION AND APPLICATIONS. Studies in Computational Intelligence, 555 . Springer International Publishing, Switzerland, pp. 385-411. ISBN 10.1007/978-3-319-05885-6_16

Putra, Azma and Munawir, Al and Mohamad, W. M. F. W. and Mohammad, J. I (2014) The Effect of Direct Field Component on A Statistical Energy Analysis (SEA) Model. Applied Mechanics and Materials, 471. pp. 279-284. ISSN 1660-9336

Putra, Azma and Ramlan, Roszaidi and Suhaimi, Khalis (2014) Translational-rotary frequency up conversion vibration based energy harvesting device for human body motion. Applied Mechanics and Materials, 471. pp. 349-354. ISSN 1660-9336

Putra, Azma and Rivai, Ahmad and Mun, Wai C. and Muhammad, Noryani (2014) Preliminary Investigation On The Perforated Panel Mobility Using Finite Element Method. Applied Mechanics and Materials, 471. pp. 341-346. ISSN 1660-9336

Putra, Azma and Saari, N. F and Bakri, H and Ramlan, Roszaidi (2014) Vibration Strength Estimation of a Structure-Borne Source: Case Study for a Reception Beam. Applied Mechanics and Materials, 471. pp. 69-73. ISSN 1660-9336

Putra, Azma and Sajidin, Muhammad and Salleh, Norliana (2014) Modelling the Effect of Flexural Vibration on Sound Absorption of A Micro-perforated Panel Using Wave Propagation Method. Applied Mechanics and Materials, 471. pp. 255-260. ISSN 1660-9336

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Mathematical formulation for bending moment wave in non-dispersive finite rod. International Review of Mechanical Engineering. pp. 523-530. ISSN 1970-8734

Putra, Azma and ABDULLAH, Mohd Azman and Salim, Mohd Azli (2014) Linear and Angular Displacement Relationship of Natural Rubber Engine Isolator. Applied Mechanics and Materials. pp. 250-253. ISSN 1660-9336

Putra, Azma and Ab Latif, Nurain Shyafina and David, Thompson and Muhammad, Noryani (2014) Modeling Sound Radiation From A Baffled Vibrating Plate For Different Boundary Conditions Using An Elementary Source Technique. Inter-Noise And Noise-Con Congress And Conference Proceedings, 249 (-). pp. 5812-5819. ISSN -

Putra, Azma and Cheah, Yee Mun and Muhammad, Noryani and Rivai, Ahmad and Wai, C. Mun (2014) The Effect of Perforation on the Dynamics of a Flexible Panel. Advances in Acoustics and Vibration. pp. 1-18. ISSN 1687-627X

Putra, Azma and Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris (2014) Prediction of Waste Heat Energy Recovery Performance in a Naturally Aspirated Engine Using Artificial Neural Network. ISRN MECHANICAL ENGINEERING. pp. 1-6. ISSN 2090-5130

Putra, Azma and Ismail, Ahmad Yusuf (2014) Normal Incidence Of Sound Transmission Loss From Perforated Plates With Micro And Macro Size Holes. Advances in Acoustics and Vibration, 2014 (-). pp. 1-12. ISSN 1687-627X

Putra, Azma and Ismail, Ahmad Yusuf (2014) Normal Incidence of Sound Transmission Loss from Perforated Plates with Micro and Macro Size Holes. Advances in Acoustics and Vibration. pp. 1-12. ISSN 1687-627X

Putra, Azma and Norfarizan, Siti and Samekto, H and Salim, Mohd Azli (2014) Static Analysis of a Laminated Rubber-Metal Spring Using Finite Element Method. Advanced Materials Research, Vol. 8. pp. 86-90. ISSN 1662-8985

Putra, Azma and Safarudin Gazali , Herawan and Abdul Hakim, Rohhaizan and Ahmad Faris , Ismail (2014) Prediction of Waste Heat Energy Recovery Performance in a Naturally Aspirated Engine Using Artificial Neural Network. ISRN MECHANICAL ENGINEERING, 2014. pp. 1-6. ISSN 2090-5130

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Analysis of Axial Vibration in the Laminated Rubber-Metal Spring. Advanced Materials Research, 845. pp. 46-50. ISSN 1662-8985

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Predicted Transmissibility of an Experimental Approach for a Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8 (4). pp. 104-110. ISSN 1995-0748

Putra, Azma and Shyafina, Nurain and Muhammad, Noryani and Bakri, Hairul and Saari, N. F (2014) Development of Hybrid Semi-Analytical and Finite Element Analysis to Calculate Sound Radiation from Vibrating Structure. Advanced Materials Research, Vol. 8. pp. 71-75. ISSN 1662-8985

Puvanasvaran, A. Perumal and Al Amin, Mohamed Sultan and Mohd Syaiful Rizal, Abdul Hamid and Norazlin, Nasir (2014) Exploratory The Transitional Impact From Lean Production To Open Source. Science International (Lahore), 26 (5). pp. 1697-1702. ISSN 1013-5316

Puvanasvaran, A. Perumal and Suresh, Vasu and Norazlin, Nasir (2014) Lean Environmental Management Integration System (LEMIS) Framework Development. International Journal Of Social, Management, Economics And Business Engineering, 8 (12). pp. 3575-3582. ISSN -

Puvanasvaran, A. Perumal and Yee, Hui Hui and Norazlin, Nasir (2014) Managing Waste Elimination Database In Lean Manufacturing: Improve Problem Solving Capability. American Journal Of Engineering And Applied Sciences, 7 (2). pp. 271-281. ISSN 1941-7020

Q

Qumrul, Ahsan and Asma, Haseeb and Hussein, Nur Izan Syahriah and Chang , Siang Yee (2014) 9% Nickel Steels and Their Welding Behavior. In: Comprehensive Materials Processing. Elsevier, 135 -149. ISBN 9780080965321

R

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Abdullah, Lokman and Chiew, Tsung Heng (2014) Study on effect of sigmoid like curves in pre-sliding regime on ball screw driven positioning stage. In: Intl. Conf. on Advances In Civil, Structural And Mechanical Engineering- CSM 2014, 1-2 june 2014, University of Westminster, London.

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Chiew, Tsung Heng and Abdullah, Lokman and Maslan, Mohd Nazmin (2014) Contour error analysis of precise positioning for ball screw driven stage using friction model feedforward. In: 12th Global Conference on Sustainable Manufacturing Emerging Potentials, 22-24 September 2014, Johor Bahru, Malaysia. (In Press)

Rabatul Aduni , Sulaiman (2014) Accuracy of queries for storage space optimisation in green data centre. Masters thesis, UTeM.

Raden Achmad , Chairdina Leuveano (2014) Cost optimization based on joint economic lot size model by incorporating transportation costs for single sullpier-purchaser. Masters thesis, UTeM.

Rahifa , Ranom (2014) Mathemathical modelling of lithium ion batteries. PhD thesis, UTeM.

Rahim, Siti Lydia and Maidin, Shajahan (2014) Feasibility Study Of Additive Manufacturing Technology Implementation In Malaysian Automotive Industry Using Analytic Hierarchy Process. Advanced Material Research, 903 (-). pp. 450-454. ISSN 1662-8985

Rahman, Hashim (2014) Antecedents Of Organisational Commitment Among Engineers At Tenaga Nasional Berhad. PhD thesis, Universiti Teknikal Malaysia Melaka.

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mansor, Muhd Ridzuan and Mat Yamin, Ahmad Kamal and tamaldin, noreffendy (2014) Design and Development of Light Weight Engine Mounting for UTeM Formula Varsity Race Car. Applied Mechanics and Materials. pp. 484-488. ISSN 1660-9336

Raihana Syahirah Abdullah, RS Abdullah and Mohd Faizal ABdollah, Faizal M.A. and Zul Azri Muhamad Noh, ZAM Noh (2014) Tracing the P2P Botnets Behaviours via Hybrid Analysis Approach. European Journal of Scientific Research. pp. 75-85. ISSN 1450-216X/ 1450-202X

Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985

Raja Abdullah, Raja Izamshah and J.P.T. , Mo and S., Ding and A Rahman, Muhamad Arfauz and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir (2014) Effect Of Parameter Condition On Surface Roughness For Machining AISI D2 Hardened Tool Steel. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 47-56. ISSN 1985-3157

Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659

Raja Izamshah Raja Abdullah (2014) A Plastic Wall Tile And Method Of Manufacturing Thereof. PI 2014703490.

Raja Othman, Raja Nor Firdaus Kashfi and Misron, Norhisam and Chockalingam, Aravind Vaithilingam and Nirei, Masami and Wakiwaka, Hiroyuki (2014) Improvement of Energy Density in Single Stator Interior Permanent Magnet Using Double Stator Topology. Mathematical Problems in Engineering, 2014 (2014). pp. 1-15. ISSN 1563-5147

Ramadhan, Rakhmat Sani (2014) Hybrid Neural Network With K-Means For Forecasting Response Candidate In Direct Marketing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramdan, Nur Sufiah Akmala and Bani Hashim, Ahmad Yusairi and Kamat, Seri Rahayu and Ali Mokhtar, Mohd Najib and Asmai, Siti Azirah (2014) On Lower-back Pain and Its Consequence to Productivity. Journal of Industrial and Intelligent Information, 2 (2). pp. 83-87. ISSN 2301-3745

Ramdan, Nur Sufiah Akmala and Bani Hashim, Ahmad Yusairi and Kamat, Seri Rahayu and Asmai, S. A. (2014) Techniques on Video Streaming for Back Pain Prevention. Manufacturing Science and Technology 2(2): 34-44, 2014, 2 (2). pp. 67-74. ISSN 2333-2697

Ramlee, Ridza Azri and Hashim, Nik Mohd Zarifie and Abdul Rahman, Rozeana and Aziz, Khairul Azha A (2014) Machine vision based height measuring system. International Journal of Research in Advent Technology, 2 (8). pp. 48-50. ISSN E-ISSN 2321-9637

Ramlee, Rimashadira and Draman @ Muda, Azah Kamilah (2014) PCA Versus LDA As Dimension Reduction For Individuality Of Handwriting In Writer Verification. Journal of Information Assurance and Security, 9 (6). pp. 367-375. ISSN 1554-1010

Ramli, Mohd Zulkifli and Salam, Zainal (2014) A Simple Energy Recovery Scheme To Harvest The Energy From Shaded Photovoltaic Modules During Partial Shading. IEEE Transactions on Power Electronics, 29. 6458 - 6471. ISSN 0885-8993

Ramli, Mohd zulkifli and Salam, Zainal (2014) A Simple Energy Recovery Scheme to Harvest the Energy from Shaded Photovoltaic Modules During Partial Shading. Power Electronics, IEEE Transactions on (Volume:29 , Issue: 12 ). pp. 6458-6571. ISSN 0885-8993

Ramli, Mohd zulkifli and Zainal, Salam (2014) A Simple Energy Recovery Scheme to Harvest the Energy from Shaded Photovoltaic Modules During Partial Shading. IEEE Transactions on Power Electronics. 0-1. ISSN 0885-8993 (Submitted)

Ranjit Singh Sarban Singh (2014) An Electricity Consumption Tracking Meter. PI 2014001332.

Razali, Muhammad Fahmi and Asmala, A. and Nurul Iman, S B and Mohd, Othman * (2014) The Effects Of Pixel Aggregation On The Radiometric Properties Of Landsat-8 Satellite Imagery. Science International, 26 (5). pp. 1811-1815. ISSN 1013-5316

Razali, Sazalinsyah and Hashim, Nik Mohd Zarifie and Yahya, Syazrul Zulhazmee and Khairul Azha , A. Aziz and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Different Approach Of Video Compression Technique : A Study. International Journal of Science and Engineering Applications , 3 (5). pp. 143-149. ISSN 2319-7560

Razali, Sharifah Nadiyah and Shahbodin, Faaizah (2014) The Usage of CIDOS and Social Network Sites in Teaching and Learning Processes at Malaysian Polytechnics. INTERNATIONAL JOURNAL OF COMPUTERS AND TECHNOLOGY , 13 (4). pp. 4354-4359. ISSN 2277-3061

Razali, Sharifah Nadiyah and Shahbodin, Faaizah and Bakar, Norasiken and Hussin, Hanipah and Ahmad, Mohd Hafiez (2014) The need of incorporating Cidos with Facebook to facilitate online collaborative learning. WIT Transaction on Information and Communication Technologies, 58. pp. 1089-1097. ISSN 1743-3517

Razali, Sharifah Nadiyah and Shahbodin, Faaizah and Hussin, Hanipah and Bakar, Norasiken (2014) Factors That Affecting The Effective Online Collaborative Learning Environment. In: Fourth World Congress on Information and Communication Technologies (WICT), 8 - 11 Disember 2014, Malacca. (Submitted)

Razali, Sharifah Nadiyah and Shahbodin, Faaizah and Hussin, Hanipah and Bakar, Norasiken (2014) Online Collaborative Learning Elements to Propose An Online Project Based Collaborative Learning Model. In: International Conference on Engineering, Technology, and Applied Business (ICETAB 2014), 3-4 December 2014, Batam State Polytechnic, Batam Island, Indonesian. (Submitted)

Razali, Sharifah Nadiyah and Hussin, Hanipah and Shahbodin, Faaizah (2014) 21st Century Core Soft skills research focus for Integrated Online Project Based Collaborative Learning Model. Journal of Applied Science and Agriculture, 9 (11). pp. 63-68. ISSN 1816-9112

Razali, Sharifah Nadiyah and Shahbodin, Faaizah (2014) The Usage of CIDOS and Social Network Sites in Teaching and Learning Processes at Malaysian Polytechnics. INTERNATIONAL JOURNAL OF COMPUTERS AND TECHNOLOGY , 13 (4). pp. 4354-4359. ISSN 2277-3061

Razali, Sharifah Nadiyah and Shahbodin , Faaizah and Bakar, Norasiken and Hussin, Hanipah (2014) Perceptions towards the Usage of Collaborative Learning in Teaching and Learning Processes at Malaysia Polytechnic. International Journal of Multidisciplinary Education and Research– IJMER, 1 (2). pp. 42-45. ISSN 2277 - 7881

Rhonira, Latif (2014) Characterisation Of Sheet Resistivity And Contact Resistivity For Source/Drain Of N-Mosfet Device. Journal Of Telecommunication, Electronic And Computer Engineering, 6 (2). pp. 29-36. ISSN 2180-1843

Ridhwan, J. and Hafidzal, M.H.M and Zakaria, Mohamad Shukri and Muhammad, Syafiq (2014) Effect Of Cooling Rate On Microstructures And Mechanical Properties Of C102 Copper Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 6 (1). pp. 87-94. ISSN 2180-1053

Robani, Anidah and Md Saad, Mohd Shamsuri and Ariffin, Hafzan (2014) Positioning Social Capital For Sustainable Industrial Cluster In Malaysia. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 26 (5). pp. 1807-1810. ISSN 1013-5316

Robert Milkey, Kolandaisamy (2014) Laser Machining Of Glass Fibre Reinforced Plastics (GFRP). Masters thesis, Universiti Teknikal Malaysia Melaka.

Roni Sahroni, Taufik and Mohd Shahir, Kasim and Mohd Amran, Md Ali and Effendi, Mohamad (2014) Design and optimization of runner and gating systems for permanent mould casting. In: 24th Design Engineering Systems Division JSME Conference Japan Society of Mechanical Engineers, 17-19th September, JSME Conference Japan Society of Mechanical Engineers, .

Rose Farahiyan, Munawar and Mohd Khairul Shahril, Mustaq Ahmad and Maisarah, Abu and Ahmad Yusairi, Bani Hashim (2014) Green magnetic wave absorber: The potential of paddy straw and recycled paper. Materials Research Innovations, 18 (S6). pp. 21-25. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

Rozilawati , Mohd Nor and Chong, Shin Horng (2014) Robustness evaluation for point-to-point control of a one mass rotary system. In: The 14th International Conference on Control, Automation & Systems (ICCAS), 22-25, October 2014, Seoul, South Korea.

S

S. Thiru, Chitrambalam and Manimaran, Selvam and T., Joseph Sahaya Anand (2014) Characterization of orifice gas flow through a tubular, coated consumable welding electrode by CFD analysis. Science International, 26 (5). pp. 1773-1778. ISSN 1013-5316

S.A. , Fadhilah and R.S., Marhamah and A.H.M., Izzat (2014) Copper Oxide Nanoparticles for Advanced Refrigerant Thermophysical Properties: Mathematical Modeling. Journal of Nanopaticles. pp. 1-5. ISSN Hindawi Publishing Corporation

Sahazati, Md Rozali (2014) Optimized Back-Stepping Controller For Position Tracking Of Electro-Hydraulic Actuators. PhD thesis, Universiti Teknikal Malaysia Melaka.

Said , Abdou Mfoihaya (2014) E-goverment in comoros : towards a transformational approach through the reengineering of public finance services and process. Masters thesis, UTeM.

Sakidin, Hamzah and Asmala, A. and Bugis, Ismadi (2014) Modelling of GPS tropospheric delay wet Neill mapping function (NMF). In: 3RD INTERNATIONAL CONFERENCE ON FUNDAMENTAL AND APPLIED SCIENCES (ICFAS 2014): Innovative Research in Applied Sciences for a Sustainable Future, 3-5 June 2014, Kuala Lumpur.

Sakidin, Hamzah and Tay, Choo Chuan and Asmala, A. (2014) The Impact of Simplified UNBab Mapping Function On GPS Tropospheric Delay. In: 3RD INTERNATIONAL CONFERENCE ON FUNDAMENTAL AND APPLIED SCIENCES (ICFAS 2014): Innovative Research in Applied Sciences for a Sustainable Future, 3-5 June 2014, Kuala Lumpur.

Salam Oleiwi , Radhi Alzubaidi (2014) Measurement of key factors affecting employee extra-role behaviour in Ministry of Municipalities and Public Works in Iraq. Masters thesis, UTeM.

Salim, Mohd Azli and Putra, Azma and Abdullah, Mohd Azman (2014) Mathematical Formulation For Bending Wave In Non-Dispersive Finite Rod. International Review on Modelling & Simulations, 7 (3). pp. 523-530. ISSN 1974-9821

Salim, Mohd Azli and Abdullah, Mohd Azman and Putra, Azma (2014) Predicted Transmissibility Of An Experimental Approach For A Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8. p. 7. ISSN 1995-0748

Salim, Mohd Azli and Wan Mohamad, Wan Mohd Farid and Maksom, Zulisman and Kamat, Seri Rahayu and Sukarma, Lukman and Putra, Azma and Abdullah, Mohd Azman (2014) Housing Improvement Using Quality Function Development In Melaka Resident Area:A Case Study. Advanced Review On Scientific Research, 4. p. 13. ISSN 2289-7887

Salim , Mohd Azli and Putra, Azma and Abdullah, Mohd Azman and Ahmad, Nazirah (2014) Development Of Laminated Rubber-Metal Spring Using Standard Malaysia Rubber Constant Viscosity-60. International Review of Mechanical Engineering (I.RE.M.E.), 8. p. 5. ISSN 1970-8734

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser (2014) The effects of Cu content on microstructure and mechanical properties of thixoformed A319 aluminium alloys. Applied Mechanics and Materials, 548-549. pp. 237-241. ISSN 1660-9336

Salleh, Azahari and Hashim, Nik Mohd Zarifie and Mohamad, Najmiah Radiah and Ab Hadi, Nik Azran and Abd Aziz, Mohamad Zoinol Abidin (2014) Development Of High Performance And Low Cost Automatic Toll Payment System Using Rfid Technology For Malaysia Environment. International Journal for Advance Research in Engineering and Technology, 2 (X). pp. 1-7. ISSN 2320-6802

Salleh, Azahari and Mohamad, Najmiah Radiah and Hashim, Nik Mohd Zarifie and Abd Aziz, Mohamad Zoinol Abidin and Misran, Mohamad Harris (2014) Design Of Wideband Microstrip Bandpass Filter For S-Band Application. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 843-848. ISSN 1991-8178

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Syarif, Junaidi (2014) Morphological Evolution During Partial Re-Melting Of AISI D2 Cold-Work Tool Steel. Sains Malaysiana, 43 (8). pp. 1213-1219. ISSN 0126-6039

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2014) Microstructure and mechanical properties of thixoformed A319 aluminium alloy. Materials and Design, 64. pp. 142-152. ISSN 0261-3069

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser (2014) Thermodynamic modelling of Al-Si-Cu alloys for semisolid processing. Sains Malaysiana, 43. pp. 791-798. ISSN 0126-6039

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khalid Salim (2014) Microstructure evolution and mechanical properties of rheocast A319 aluminum alloy using cooling slope. Applied Mechanics and Materials, 663. pp. 261-265. ISSN 1660-9336

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi (2014) The effects of mg addition on the microstructure and mechanical properties of Thixoformed Al-5%Si-Cu alloys. Journal of Alloys and Compounds. pp. 121-130. ISSN 0925-8388

Samsudin, Sharatul Izah and Rahmat, Mohd Fuaad and Abd Wahab, Norhaliza (2014) Nonlinear PI Control With Adaptive Interaction Algorithm For Multivariable Wastewater Treatment Process. Mathematical Problems in Engineering, 1. p. 13. ISSN 1563-5147

Samsudin, Sharatul Izah and Rahmat, Mohd Fuaad and Abdul Wahab, Norhaliza and Che Razali , Mashitah and Gaya, Muhammad Sani (2014) Decentralized Adaptive PI With Adaptive Interaction Algorithm Of Wastewater Treatment Plant. Jurnal Teknologi , 67. pp. 15-21. ISSN 2180-3722

Samsul Anuar, Sulong (2014) Characterization of composite tiles fabricated from recycled polypropelene (rPP) and silica using hot press method. Masters thesis, UTeM.

Saptari, Adi and Poh, Kiat Ng (2014) A Review Of Shape And Size Considerations In Pinch Grips. Theoretical Issues in Ergonomics Science, 15 (3). pp. 305-317. ISSN 1463-922X

Sapuan, S.M. and Mansor, Muhd Ridzuan (2014) Concurrent engineering approach in the development of composite products: A review. Materials and Design, 58. pp. 161-167. ISSN 0261-3069

Sayed Kushairi, Sayed Nordin (2014) Examining the Effect of Extracurricular Activities on Academic Achievements among the Public University Students in Malaysia. Asian Social Science , 10 (9). pp. 171-177. ISSN ISSN 1911-2017 (Print) ISSN 1911-2025 (Online)

Sayed Kushairi, Sayed Nordin and Al Amin, Mohamed Sultan and Mohd Said, Shahrom and Wan Daud, Wan Mohd Bukhari and Mohd Shahrizan, Othman (2014) Analisis Laporan Kerosakan di Kolej Kediaman. In: Seminar Pengurusan Asrama Peringkat Kebangsaan (SPARK) 2014, 11-13 June 2014, Kuching, Sarawak.

Sayed Kushairi, Sayed Nordin and Bushra, Abdul Halim and Mohd Zamzuri, Ab Rashid and Mohd Shahrizan, Othman (2014) The Relationship of Education And ICT Determinants on Nation's Growth: An Empirical Analysis of Malaysia And Muslim Countries. Journal of Human Capital Development, 6 (2). pp. 115-123. ISSN ISSN 1985-7012

Sayed Kushairi, Sayed Nordin and Hamzah, Khairum (2014) Economic Literacy and Public Perception towards Government Spending on Education in Malaysia. IOSR Journal of Economics and Finance, 4 (2). pp. 63-67. ISSN e-ISSN: 2321-5933, p-ISSN: 2321-5925

Sayed Kushairi, Sayed Nordin and Khairul Fadzli, Samad and Hamzah, Khairum (2014) Determinants of CO2 Emissions in ASEAN Countries Using Energy and Mining Indicators. In: International Conference on Mathematics, Engineering & Industrial Applications, 28th-30 May 2014, The Gurney Resort Hotel & Residences Penang, Malaysia. (In Press)

Sayed Kushairi, Sayed Nordin and Samat, Khairul Fadzli and Al Amin, Mohamed Sultan and Nurul Wirdah, Mafazi (2014) Adaptation of Abbreviated Mathematics Anxiety Rating Scale for Engineering Students. In: International Conference on Mathematics, Engineering & Industrial Applications, 28th-30 May 2014, The Gurney Resort Hotel & Residences Penang, Malaysia. (In Press)

Sazalinsyah , Razali (2014) Immune systems inspired multi-robot cooperative shepherding. PhD thesis, UTeM.

Sedek, Muliati and Syed Hassan, Syed Najmuddin and Robani, Anidah and Kamaruddin, Mohd Fauzi (2014) The Development And Validation Of A Framework For Teaching Competencies In Pedagogy Content Knowledge And Instructional Quality. The Social Sciences, 11 (13). pp. 3196-3200. ISSN 1818-5800

Seri Rahayu , Kamat and Mohamad Firdaus , Ain (2014) Design and analysis ergonomics workstation in stamping industry. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM Melaka.

Seri Rahayu , Kamat and Norhidayah, Hashim and Isa, Halim (2014) Effect of Working Posture and Hand Grip for Carpal Tunnel Syndrome Among Aerospace Workers. International Journal of Mechanical & Mechatronics Engineering, 14 (01). pp. 1-6. ISSN 2077-124X

Seri Rahayu , Kamat and Norhidayah, Hashim and Mohd Shahrizan, Othman (2014) Diminish muscle activity by changing an anthropometry data with appropriate workstation among workers in aerospace manufacturing industry. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Shaaban, A. and Se, Sian-Meng and Dimin, M.F. and Juoi, Jariah M. and Husin, Mohd Haizal Mohd and Mitan, Nona Merry M. (2014) Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis. Journal of Analytical and Applied Pyrolysis , 107. 31- 39. ISSN 01652370

Shaaban, Azizah and SE, Siang Meng and Mitan, Nona Merry M and Dimin, Mohd Fairuz (2014) Characterization of Biochar Derived from Rubber Wood Sawdust through Slow Pyrolysis on Surface Porosities and Functional Groups. Procedia Engineering, 68 (56). pp. 365-371. ISSN ISSN: 1877-7058

Shaarani, Ahmad Shaarizan and Kasmuri, Emaliana and Abd Manap, Nurulfajar and Karjanto, Juffrizal (2014) Widgetry basics for i-Book. Penerbit Universiti, Universiti Teknikal Malaysia Melaka.

Shaffiei, Zatul Alwani and Abal Abas, Zuraida and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad and Hussin, Burairah (2014) Optimization in driver’s scheduling for university shuttle bus using harmony search. Science International. pp. 1879-1882. ISSN 1013-5316

Shahbodin, Faaizah and Che Ku Mohd, Che Ku Nuraini and Che Pee @ Che Hanapi, Ahmad Naim (2014) Personalized Learning Environment (PLE) : Classification Of Dominant Learning Styles. AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, 8. pp. 366-371. ISSN 1991-8178

Shahbodin, Faaizah and Razali, Sharifah Nadiyah and Hussin, Hanipah and Bakar, Norasiken (2014) Online Collaborative Learning Elements To Propose An Online Project Based Collaborative Learning Model. Mediterranean Journal Of Social Sciences Www.Mcser.Org/Journal . Vol 5, No 23 (2014), Issn 2039-2117, Q3 Rank, 5. p. 7. ISSN 2039-2117

Shahbodin, Faaizah and Wan Hassim, Wan Haniza and Shibghatullah, Abdul Samad (2014) Solving New Student Allocation Problem (NSAP) With Analytical Hierarchy Process (AHP). Science International (Lahore), 26(5), 1659-1662, 2014, 26. pp. 1659-1662. ISSN 1013-5316

Shair, Ezreen Farina and Khor, Shen Young and Abdullah, Abdul Rahim and Jaafar, Hazriq Izzuan and Mohd Ali, Nursabillilah and Zainal Abidin, Amar Faiz (2014) A Brief Review of Cuckoo Search Algorithm (CSA) Research Progression from 2010 to 2013. International Review of Automatic Control (I.RE.A.CO.), 7 (5). pp. 428-435. ISSN 1974-6059

Shakir, I. and Shibghatullah, Abdul Samad and Hussin, Burairah and Gede , Pramudya Ananta and Shafei, Suhailan (2014) REDUCING DISTRIBUTED URLS CRAWLING TIME : A COMPARISON OF GUIDS AND IDS. Journal of Theoretical and Applied Information Technology. pp. 1-8. ISSN 1992-8645

Shakoor, Rabia and Hassan, Mohammad Yusri and Abdur, Raheem and Nadia, Rasheed and Mohd Nasir, Mohamad Na'im (2014) Wind farm layout optimization by using definite point selection and genetic algorithm. In: 2014 IEEE International Conference on Power and Energy (PECon), , 1-3 Dec 2014, Sarawak, Malaysia.

Shamshiri, Meysam and Gan, Chin Kim and Omar, Rosli and Ab Ghani, Mohd Ruddin (2014) ­­Optimum Frequency Droop Control of Islanded Micro­-Grid Using PID-­PSO Controller. International Review of Automatic Control (IREACO). pp. 271-277. ISSN 1974-6059

Shamshiri, Meysam and Sapar, Ahmad Farid and Gan, Chin Kim and Daram , Revinnath Tengga and Ab Ghani, Mohd Ruddin (2014) Reactive Power Imbalance Method for Islanding Detection in Micro-Grid Operation. International Journal of Recent Technology and Engineering, 2 (6). pp. 94-98. ISSN 2277-3878

Shamsuddin, Nur Hazahsha and Omar, Nu Farhana and Sulaima, Mohamad Fani and Jaafar, Hazriq Izzuan and Abdul Kadir, Aida Fazliana (2014) The Distribution Network Reconfiguration Improved Performance of Genetic Algorithm Considering Power Losses and Voltage Profile. International Journal of Engineering and Technology (IJET), 6 (2). pp. 1247-1258. ISSN 0975-4024

Shamsuddin , Man and Noorazuan, M. H. and Asmala, A. and Khin, M. T. and Nurul Safiah, S (2014) Kebolehupayaan sistem penuaian hujan sebagai bekalan air alternatif di Malaysia: Suatu penelitian awal. Applied Mathematical Sciences, 10 (6). pp. 97-104. ISSN 1312-885X

Shamsudin, Nur Hazahsha and abidullah, Noor Athira and Abdullah, Abdul Rahim and Sulaima, Mohamad Fani and Jaafar, Hazriq Izzuan (2014) A new technique for the reconfiguration of radial distribution network for loss minimization. International Journal of Engineering and Technology, 6 (5). pp. 2488-2495. ISSN 0975-4024

Shamsudin, Nur Hazahsha and Abidullah, Noor Athira and Abdullah, Abdul Rahim and Mamat, Mira Syuhadah and Sulaima, Mohamad Fani and Jaafar, Hazriq Izzuan (2014) A New Technique For The Reconfiguration Of Radial Distribution Network For Loss Minimization. International Journal Of Engineering And Technology (IJET), 6 (5). pp. 2488-2495. ISSN 2319-8613

Shamsudin, Nur Hazahsha and Omar, Nurul Farhana and Abdullah, Abdul Rahim and Sulaima, Mohamad Fani and Abidullah, Noor Athira and Jaafar, Hazriq Izzuan (2014) An Improved Genetic Algorithm For Power Losses Minimization Using Distribution Network Reconfiguration Based On Re-Rank Approach. Research Journal of Applied Sciences, Engineering and Technology, 8 (8). pp. 1029-1035. ISSN 2040-7459

Shamsudina, Nurul Fathiyah and Basiron, Halizah and Saaya, Zurina and Abdul Rahman, Ahmad Fadzli Nizam and Zakaria, Mohd Hafiz and Hassim, Nurulhalim (2014) Sentiment Classification Of Unstructured Data Using Lexical Based Techniques. Jurnal Teknologi, 77 (18). pp. 113-120. ISSN -

Sharatul Izah, Sharatul Izah and Mohd Fua'ad , Rahmat and Norhaliza , Abdul Wahab and M.C, Razali and M.S. , Gaya and Syed Salim , Syed Najib (2014) Improvement of activated sludge process using enhanced nonlinear PI controller. Arab J Sci Eng, 39 (8). 6575-6586 . ISSN 1319-8025

Sharifah Sakinah, Syed Ahmad (2014) A Comparative Study Of Fuzzy C-Means And K-Means Clustering Techniques. In: Malaysian Technical Universities Conference on Engineering & Technology (MUCET 2014), 10-11 November 2014, Melaka.

Sharifah Sakinah, Syed Ahmad (2014) Feature and Instances Selection for Nearest Neighbor Classification via Cooperative PSO. In: 2014 Fourth World Congress on Information and Communication Technologies (WICT) , 8-10 December 2014, Equatorial Hotel, Melaka.

Shibghatullah, Abdul Samad and M. Sultan, Sakhr and R. Abudulsheed, Hadeur and Fadilah, Suzi Iryanti and Abd Wahab, Mohd Helmy (2014) Design And Development Of Zigbee Based Wireless Remote Controlling And Data Acquisition Device Through Internet. Journal of Theoretical and Applied Information Technology. pp. 228-233. ISSN 1992-8645

Shibghatullah, Abdul Samad and Xia, Khoo Wen and Azmin, Farah Ayuni and Mohd Johar, Fauzi (2014) Parallel processing in Compute Unified Device Architecture (CUDA) for energy saving glass. Science International-Lahore. pp. 1755-1757. ISSN 1013-5316

Shibghatullah, Abdul Samad and Al Barazanchi, Israa (2014) An Analysis Of The Requirements For Efficient Protocols In WBAN. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 6 (2). pp. 19-22. ISSN 2180-1843

Shibghatullah, Abdul Samad and Al Barazanchi, Israa (2014) An Analysis of the Requirements for Efficient Protocols in WBAN. Journal of telecommunication, electronic and computer engineering . pp. 19-22. ISSN 2180-1843

Shin, Horng Chong and Sato, Kaiji (2014) Practical And Robust Control For Precision Motion : AR-CM NCTF Control Of A Linear Motion Mechanism With Friction Characteristics. IET Control Theory and Applications, 9 (5). pp. 745-754. ISSN 1751-8644

Shukor, Ahmad Zaki and Fujimoto, Yasutaka (2014) Direct-Drive Position Control of a Spiral Motor as a Monoarticular Actuator. IEEE Transactions on Industrial Electronics. pp. 1063-1071. ISSN 0278-0046

Shukor, Ahmad Zaki and Fujimoto, Yasutaka (2014) Direct-Drive Position Control Of A Spiral Motor As A Monoarticular Actuator. IEEE Transactions on Industrial Electronics, 61 (2). pp. 1063-1071. ISSN 0278-0046

Sihombing, Haeryip and Halim, Isa and Ab Rahman , Mahmood and Baharudin , Abu Bakar (2014) Kano Model approach for design improvement associated with ergonomics issues in CNC machine design. Journal of Advanced Manufacturing Technology, 8 (2). pp. 61-69. ISSN 1985-3157

Siti Azirah , Amai (2014) A data-driven prognostic model using time series prediction techniques in maintenance decision making. PhD thesis, UTeM.

Siti Fatimah , Abait (2014) Jute/glass reinforced polyester resin laminated composite by compressive moulding : mechanical properties based on different stacking sequence and surface treatment. Masters thesis, UTeM.

Siti Feirusz , Ahmad Fesol (2014) Ecommunity : a mobile e-waste community framework. Masters thesis, UTeM.

Siti Hajar, Mohamad and Norfaridatul Akmaliah, Othman and Juhaini, Jabar and Izaidin, Abdul Majid (2014) Customer relationship management practices: the impact on organizational performance in SMEs of food manufacturing industry. European Journal of Business and Management . pp. 35-48. ISSN ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online)

Siti Hajar , Mohamad and Norfaridatul Akmaliah, Othman and Juhaini, Jabar (2014) The impact of customer relationship management on business performance. Chapter 9. In: JPP Book Management. McGraw-Hill, pp. 35-48. (In Press)

Siti Hajar , Sheikh Md Fadzullah (2014) The oblique impact response of composites and sandwich structures. PhD thesis, Universiti Teknikal Malaysia Melaka.

Siti Noormiza , Mat Isa (2014) Simplified fuzzy logic control of sinusoidal permanent magnet synchronous motor drives. Masters thesis, UTeM.

Siti Nurfatihah , Ab Rasid (2014) Waste reduction in textile manufacturing company by value stream mapping implementation. Masters thesis, UTeM.

Siti Nurul Mahfuzah, Mohamad (2014) Model for online teaching tools based on interpersonal, visual and verbal intelligence. PhD thesis, UTeM.

Sivakumar, Dhar Malingam and Radzai, Said and Rivai, Ahmad and Ahadlin, Mohd Daud and Sivarao, Subramonian (2014) Effect of Reprocessing Palm Fiber Composite on the Mechanical Properties. Applied Mechanics and Materials. pp. 146-150. ISSN 16609336

Sivakumar, Dhar Malingam and Sivarao, Subramonian and Mohd Zulkefli, Selamat and Radzai, Said (2014) Effects of Process Parameters during Forming of Glass Reinforced-pp based Sandwich Structure. Advances in Environmental Biology. pp. 3143-3150. ISSN 1995-0756

Sivakumar, Dhar Malingam and Sivarao, Subramonian and Selamat, Mohd Zulkefli and Radzai, Said (2014) A Study on the Mechanical and Forming Performance of Oil Palm Fiber Reinforced Polypropylene Composite. American-Eurasian Journal of Sustainable Agriculture. pp. 141-147. ISSN 1995-0748

Sivarao, Subramonian and Mallisi, R and Teng, L S (2014) Enhanced Tensile properties of Stone wool fiber-reinforced high density polyethylene (HDPE) Composites. Materials Testing, 56. pp. 150-154. ISSN ISSN 0025-5300

Soeprapto, R. Hery Satriyo (2014) Modelling lightning strike on overhead lines for the analysis of back flashover using Electromagnetic Transient Program (EMTP). International Review of Electrical Engineering (IREE), 9 (5). pp. 1071-1075. ISSN 1827- 6660

Soeprapto, R. Hery Satriyo and Abd Rahman, Amir Fiqri Adil and Mohd Nasir, Mohamad Na'im and Bohari, Zul Hasrizal (2014) Analysing of a shunt compensator installation. The International Journal of Engineering And Science, 3 (12). pp. 2319-1805. ISSN 2319 – 1813

Sophie, Porter and Mat Yamin, Ahmad Kamal and Svetlana, Aleksandrova and Stephen, Benjamin and Carol, A. Roberts and Jonathan, Saul (2014) An Assessment Of Cfd Applied To Steady Flow In A Planar Diffuser Upstream Of An Automotive Catalyst Monolith. SAE International Journal of Engines, 7 (-). pp. 8-15. ISSN 1946-3936

Subramonian, Sivarao and Abdul Rahim, Samsudin (2014) Comparison between Taguchi Method and Response Surface Methodology (RSM) in modelling CO2 laser machining. Jordan Journal of Mechanical and Industrial Engineering, 8 (1). pp. 35-42. ISSN 1995-6665

Subramonian, Sivarao and Abdul Rahim, Samsudin and Tan, C. F. and Merry, Nona (2014) AHP based decision-making in concept selection of keyless grill locking system. International Journal of Mechanical & Mechatronics Engineering, 14 (5). pp. 72-79. ISSN 2077-124X (online) 2227-2771 (Print)

Subramonian, Sivarao and Mohamad, Radzai Said and Azizah, Shaaban and Mohd Fairuz, Dimin (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1662-7482

Subramonian, Sivarao and Said, Md Radzai and Omar, Rostam and Hafiz, Mohd Zani and Hassan, Luqman Hakim and Shaaban, Azizah and Dimin, Mohd Fairuz (2014) Top Spray Fluidized Bed Granulated Paddy Urea Fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1660-9336

Sudin, Mohd Nizam and Shamsuddin, Shamsul Anuar and Musthafah, Mohd Tahir and Faiz Redza , Ramli (2014) Topology Optimization in Automotive Brake Pedal Redesign. International Journal of Engineering and Technology (IJET), 6 (1). pp. 398-402. ISSN 0975-4024

Sudin, Mohd Nizam and ABDULLAH, Mohd Azman and Ramli, Faiz Redza and Musthafah, Mohd Tahir and Shamsudin, Shamsul Anuar (2014) Review of Research on Vehicles Aerodynamic Drag Reduction Methods. International Journal of Mechanical and Mechatronics Engineering, 14 (2). pp. 35-47. ISSN 2077-124X

Suhailan, S. and Shibghatullah, Abdul Samad and Burhanuddin, M. A. (2014) A Perspective Of Automated Programming Error Feedback Approaches In Problem Solving Exercises. Journal of Theoretical and Applied Information Technology. pp. 121-129. ISSN 1992-8645

Suhaimi, Misha (2014) Comparison Between 2D and 3D Simulations of a Tray Dryer System Using CFD Software. World Applied Sciences Journal, 29 (10). pp. 1301-1309. ISSN 1818-4952

Suhaimi, Misha and Mohd Afzanizam, Mohd Rosli and Sohif , Mat and Mohd Hafidz, Ruslan and Elias, Salleh and Kamaruzzaman, Sopian (2014) Performance Test of Solar Assisted Solid Desiccant Dryer. In: Computer Applications in Environmental Sciences and Renewable Energy. WSEAS Press, pp. 174-180. ISBN 9789604743704

Sukarma, Lukman (2014) The Critical Role Of TQM, JIT, AND TPM In The Revisiting World Class Manufacturing And Manufacturing Excellence. Applied Mechanics and Materials, 660 (-). pp. 959-965. ISSN 1660-9336

Sukarma, Lukman (2014) Enhancing Firm Competitiveness Through Concurrent Implementation Of TQM, JIT And TPM. Applied Mechanics and Materials, 660 (-). pp. 976-982. ISSN 1660-9336

Sukarma, Lukman and Azmi, Hafizah and Abdullah, Nurlisa Loke (2014) The Impact Of World Class Manufacturing Practices On Company Performance : A Critical Review. Applied Mechanics and Materials, 564 (-). pp. 727-732. ISSN 1660-9336

Sukor, Nooraziera Akmal and Muda, Azah Kamilah and Draman@Muda, Noor Azilah (2014) A Comparative Study Of Treebased Structure Methods For Handwriting Identification Springer. In: Proceedings Of The First International Conference On Advanced Data And Information Engineering (Daeng-2013) - Springer. Lecture Notes in Electrical Engineering, 285 . Springer, Singapore, pp. 269-276. ISBN 9789814585170

Sulaima, Mohamad Fani and Abdullah, Faizal and Wan Daud, Wan Mohd Bukhari and Ali, Fara Ashikin and Yahya, Abu Bakar (2014) Oil and Gas Offshore Pipeline Leak Detection System: A Feasibility Study. Advanced Materials Research, Vol. 699 (2015) (pp 891-896). pp. 891-896. ISSN 1662-8985

Sulaima, Mohamad Fani and Faizal, Abdullah and Jali, Mohd Hafiz and Wan Daud, Wan Mohd Bukhari and Mohd Nasir, Mohamad Na'im and Baharom, Mohamad Faizal (2014) A Feasibility Study of Internal and External Based System for Pipeline Leak Detection in Upstream Petroleum Industry. Australian Journal of Basic and Applied Sciences. pp. 204-210. ISSN 1991-8178

Sulaima, Mohamad Fani and Jali, Mohd Hafiz and Wan Daud, Wan Mohd Bukhari and Mohd Nasir, Mohamad Na'im and Jaafar, Hazriq Izzuan (2014) Power Distribution Network Reconfiguration by Using EPSO for Loss Minimizing. Applied Mechanics and Materials, Vol. 699 (2015) (pp 809-815). pp. 809-815. ISSN 1660-9336

Sulaima, Mohamad Fani and Mohd Fadhlan , Mohamad and Jali, Mohd Hafiz and Wan Daud, Wan Mohd Bukhari and Baharom, Mohamad Faizal (2014) A Comparative Study of Optimization Methods for 33kV Distribution Network Feeder Reconfiguration. International Journal of Applied Engineering Research, 9 (9). pp. 1169-1182. ISSN 0973-4562

Sulaima, Mohamad Fani and Mohd Zambri, Mohd Khairi and Othman, Md Nazri and Mohd Nasir, Mohamad Na'im and Jali, Mohd Hafiz and Bohari, Zul Hasrizal and Wan Daud, Wan Mohd Bukhari and Ahmad Izzuddin, Tarmizi and Nor, Mohd Khanapiah (2014) Case Study of Engineering Ethics toward Natural Gas Pipeline Leaking: An Analysis through Solving Technique. International Journal of Applied Engineering Research, 9 (21). pp. 11143-11150. ISSN 0973-4562

Sulaima, Mohamad Fani and Othman, Siti Noratika and Jali, Mohd Hafiz and Jamri , Mohd Saifuzam and Mohd Nasir, Mohamad Na'im and Bohari, Zul Hasrizal (2014) A 33kV Distribution Network Feeder Reconfiguration by Using REPSO for Voltage Profile Improvement. International Journal of Applied Engineering Research, 9 (18). pp. 4569-4582. ISSN 0973-4562

Sulaima, Mohamad Fani and Shidan, Murnie Shakilla and Dahalan, Wardiah Mohd and Mokhlis, Hazlie and Baharom, Mohamad Faizal and Jaafar, Hazriq Izzuan (2014) A 16kV Distribution Network Reconfiguration by Using Evolutionaring Programming for Loss Minimizing. International Journal of Applied Engineering Research, 9 (10). pp. 1223-1238. ISSN 0973-4562

Sulaima, Mohamad Fani and En, Foo Jia and Wan Daud, Wan Mohd Bukhari and Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi (2014) Development of Building Heat Detection System: An Improvement Study. International Journal of Advances in Electrical and Electronics Engineering, 3 (1). pp. 75-81. ISSN 2319-1112

Sulaima, Mohamad Fani and Lew, H. S. and Lau, C. Y. and Lim, Carolyn K. Y. and Azily, Ahmad Tarmizi (2014) A CASE STUDY OF ENGINEERING ETHICS: LESSON LEARNED FROM BUILDING COLLAPSE DISASTER TOWARD MALAYSIAN ENGINEERS. European International Journal of Science and Technology, 3 (4). pp. 21-30. ISSN 2304-9393

Sulaima, Mohamad Fani and Lew, H. S. and Lau, C. Y. and Lim, Carolyn K. Y. and Azily, Ahmad Tarmizi (2014) A CASE STUDY OF ENGINEERING ETHICS: LESSON LEARNED FROM BUILDING COLLAPSE DISASTER TOWARD MALAYSIAN ENGINEERS. European International Journal of Science and Technology, 3 (4). pp. 21-30. ISSN ISSN: 2304-9393

Sulaima, Mohamad Fani and Mohamad, Mohd Fadhlan and Jali, Mohd Hafiz and Wan Daud, Wan Mohd Bukhari and Baharom, Mohamad Faizal (2014) Comparative Study of Heuristic Algorithm ABC and GA Considering VPI for Network Reconfiguration. In: 2014 IEEE 8th International Power Engineering and Optimization Conference (PEOCO2014), 24-25 March 2014, Langkawi, The Jewel of Kedah.

Sulaima, Mohamad Fani and Napis, Nur Faziera and Nor, Mohd Khanapiah and Dahalan, Wardiah Mohd and Mokhlis, Hazlie (2014) DG Sizing and DNR Based on REPSO for Power Losses Reduction. In: 2014 IEEE 8th International Power Engineering and Optimization Conference (PEOCO2014), 24-25 March 2014, Langkawi, The Jewel of Kedah.

Sulaima, Mohamad Fani and Othman, Md Nazri and Jali, Mohd Hafiz and Nor, Mohd Khanapiah and Shamsudin, Nur Hazahsha (2014) Engineering Ethics Case Study of Hydroelectric Sayano- Sheshenkaya Accident: Lesson Learned for Malaysian Engineer. Journal of Technology, 29 (Specia). pp. 80-90. ISSN 1012-3407

Sulaima, Mohamad Fani and Othman, Siti Atika and Jamri , Mohd Saifuzam and Omar, Rosli and Sulaiman , Marizan (2014) A DNR by Using Rank Evolutionary Particle Swarm Optimization for Power Loss Minimization. In: 2014 Fifth International Conference on Intelligent Systems Modelling and Simulation, 27 Jan - 29 Jan 2014, Sheraton Langkawi Beach Resort, Langkawi, Malaysia.

Sulaima, Mohamad Fani and Shamsudin, Nur Hazahsha and Jaafar, Hazriq Izzuan and Dahalan, Wardiah Mohd and Mokhlis, Hazlie (2014) A DNR and DG Sizing Simultaneously by Using EPSO. In: 2014 Fifth International Conference on Intelligent Systems Modelling and Simulation, 27 Jan - 29 Jan 2014, Sheraton Hotel Langkawi Beach Resort, Langkawi, Malaysia.

Sulaiman, M. Yusoff and Abdullah, Abu and Othman, Norfaridatul Akmaliah (2014) Malaysian Innovation Ecosystem : A Review Of The Literature. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 139-141. ISSN 1985-3157

Sulaiman, Marizan and Mohd Shah, Hairol Nizam and Harun, Mohamad Haniff and Mohd Kazim, Mohd Nor Fakhzan (2014) Defect Inspection System For Shape-Based Matching Using Two Cameras. Journal Of Theoretical And Applied Information Technology, 61 (2). pp. 288-297. ISSN 1992-8645

Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) Effect of high-speed parameters on uncoated carbide tool in finish turning Titanium Ti-6Al-4V ELI. Sains Malaysiana, 43. pp. 111-116. ISSN 0126-6039

Sulaiman, Siti Fatimah and Ramachandran, Kalaivani (2014) Automated Control System For Tomato Plantation. International Journal of Science, Environment ISSN 2278-3687 (O) . pp. 2258-2268. ISSN 2278-3687

Sulaiman , Marizan and Mohd Shah, Hairol Nizam and Harun, Mohamad Haniff and Mohd Kazim, Mohd Nor Fakhzan (2014) DEFECT INSPECTION SYSTEM FOR SHAPE-BASED MATCHING USING TWO CAMERAS. Journal of Theoretical and Applied Information Technology (JATIT). pp. 288-297. ISSN 1992-8645

Sulaiman , Marizan and Patakor, Fizatul Aini and Ibrahim, Zulkifilie (2014) New Methodology For Chattering Suppression Of Sliding Mode Control For Three-Phase Induction Motor Drives. WSEAS Transactions on SYSTEMS and Control, 9 (-). pp. 1-9. ISSN 1991-8763

Sulaiman , Marizan and Patakor, Fizatul Aini and Ibrahim, Zulkifilie (2014) New Methodology for Chattering Suppression of Sliding Mode Control for Three-phase Induction Motor Drives. WSEAS Transactions on SYSTEMS and Control, 9. pp. 1-9. ISSN 1991-8763

Sulaiman , Marizan and Shah, HNM and Harun, Mohd Hanif and Fakhzan, MN (2014) DEFECT INSPECTION SYSTEM FOR SHAPE-BASED MATCHING USING TWO CAMERAS. Journal of Theoretical and Applied Information Technology (JATIT), 61 (2). pp. 288-297. ISSN 1992-8645

Suraya, Laily and Mohd Amran, Md Ali and Nur Izan Syahriah, Hussein and Muhamad, Mohd Razali and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, Roni Sahroni (2014) The effect of EDM die-sinking parameters on surface integrity for aluminium composite using copper electrode. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Suresh, Vasu (2014) Lean-environmental management system integration model. Masters thesis, UTeM.

Suryana, Nanna and Abu, Nur Azman and Ernawan, Ferda (2014) Integrating A Smooth Psychovisual Threshold Into An Adaptive JPEG Image Compression. Journal Of Computers, 9 (3). pp. 1-16. ISSN 2150-7988

Susilo, Sidik and Putra, Azma and Kok, Swee Leong (2014) Acoustic energy harvesting using flexible panel and PVDF films: a preliminary study. Applied Mechanics and Materials, 554. pp. 712-716.

Susilo, Sidik and Putra, Azma and Kok, Swee Leong (2014) Modeling of piezoelectric acoustic energy harvester. Applied Mechanics and Materials, 695. pp. 757-760.

Sutikno, Tole and Jidin, Aiman Zakwan and Jidin, Auzani and Nik Idris, Nik Rumzi (2014) Strategies For FPGA Implementation Of Non-Restoring Square Root Algorithm. International Journal of Electrical and Computer Engineering (IJECE), 4 (4). pp. 548-556. ISSN 2088-8708

Syafeeza , Ahmad Radzi (2014) Convolutional neural networks for face recognition and finger-vein biometric identification. PhD thesis, UTeM.

Syed Ahmad, Sharifah Sakinah and Kamalrudin, Massila and Sidek, Safiah (2014) Customization Of Requirements Modeling Tool For Software Engineering Education. Sci.Int.(Lahore). pp. 1581-1584. ISSN 1013-5316

Syed Hussien, Sharifah Yuslinda and Jaafar, Hazriq Izzuan and Selamat, Nur Asmiza and Daud, Fiona Serina and Zainal Abidin, Amar Faiz (2014) PID Control Tuning via Particle Swarm Optimization for Coupled Tank System. International Journal of Soft Computing and Engineering (IJSCE), 4 (2). pp. 202-206. ISSN 2231-2307

Syed Mokhtar, Syed Abdul Wafiy Aiman and Hashim, Nik Mohd Zarifie and Mohamad, Najmiah Radiah and Jaafar, Anuar and Salleh, Azahari (2014) Vehicle Security System Using Zigbee Technology. International Journal for Advance Research in Engineering and Technology, 2 (VII). pp. 81-85. ISSN 2320-6802

Syed Najib , Syed Salim and Mohd Fua'ad , Rahmat and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail (2014) Position control of pneumatic actuator using an enhancement of NPID controller based on the characteristic of rate variation nonlinear gain. Position control of pneumatic actuator using an enhancement of NPID controller based on the characteristic of rate variation nonlinear gain, 75 (1-4). pp. 181-195. ISSN 1433-3015

Syed Salim, Syed Najib and Rahmat, Mohd Fua'ad and Mohd Faudzi, Ahmad 'athif and Zool Hilmi, Ismail (2014) Position control of pneumatic actuator using an enhancement of NPID controller based on the characteristic of rate variation nonlinear gain. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 181-195. ISSN 0268-3768

Syed Salim , Syed Najib and Mohd Fua'ad , Rahmat and Ahmad 'Athif, Mohd Faudzi and Zool Hilmi, Ismail and Noorhazirah, Sunar and Shamsul Anuar, Shamsudin (2014) Robust control strategy for pneumatic drive system via enhanced nonlinear PID controller. IJECE, 4 (5). pp. 658-667. ISSN 2088-8708

Syed Salim , Syed Najib and Mohd Fua'ad , Rahmat and Noorhazirah, Sunar and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Shamsul Anuar, Shamsudin (2014) Practical robust control using Self-regulation Nonlinear PID controller for pneumatic positioning system. In: Proceeding of International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2014), 20-21 August 2014, Yogyakarta, Indonesia.

Syed Salim , Syed Najib and Rahmat, Mohd Fua’ad and Mohd Faudzi, Ahmad ’Athif and Ismail, Zool H. and Sunar, Noorhazirah (2014) Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. pp. 1-12. ISSN 1024-123X

syed mohamed, muhammad syafiq (2014) Kansei Engineering Implementation on Car Center Stack Designs. International Journal of Education and Research , 2 (4). pp. 355-366. ISSN 2201-6740

syed mohamed, muhammad syafiq and Mohd Tamrin, Shamsul Bahri and Abdul Rahman, Ahmad Rizal (2014) The Efficacy of A Quantitative Cross Cultural Product Design Survey Instrument. The Efficacy of A Quantitative Cross Cultural Product Design Survey Instrument . pp. 207-212. ISSN 1995-0756

T

T., Joseph Sahaya Anand and Mohd , Zaidan and Mohd Abid, Mohd Asyadi Azam and Zolkepli, Buang (2014) Structural Studies of NiTe2 Thin Films with the Influence of Amino-additives. International Journal of Mechanical and Materials Engineering , 9 (18). pp. 1-7. ISSN 1823-0334

T., Joseph Sahaya Anand and Ahmad, Aminah and Hussain, Abdul Razak and Massila, Kamalrudin and A Bakar, Ahmad Zaki (2014) Crimehelp: crime scene description using mobile and web-based technology for better crime solving. Science International, 26 (4). pp. 1531-1534. ISSN 1013-5316

T., Joseph Sahaya Anand and Chua, Kok Yau and A., Jalar (2014) Micro-structural Studies of Thermosonic Cu-Al Bonding Interface. Advanced Materials Research, 925. pp. 154-158. ISSN 1662-8985

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz (2014) Electro synthesised NiTe2 Thin Films with the Influence of Additives. Advanced Materials Research, 925. pp. 159-163. ISSN 1662-8985

T., Joseph Sahaya Anand and Nor Hamizah, Mazlan (2014) Electro synthesized MoTe2 thin films and their semiconductor studies towards photoelectrochemical cell. Advanced Materials Research, 845. pp. 392-397. ISSN 1662-8985

Tai, Min Fee and Lee, Swee Kah and Goh, Soon Lock and Kok, Swee Leong and Kenichiroh, Mukai and Tafadwa, Magaya (2014) Adhesion enhancement for electroless plating on mold compound for EMI shielding with industrial test compliance. In: IEEE International Conference on Semiconductor Electronics (ICSE), , 27-29 Aug. 2014, Kuala Lumpur.

Taib, Mohd Hafiz and Miskon, Muhammad Fahmi and Sakidin, Hamzah and Sha’abani, Mohd Nurul Al-Hafiz (2014) Defining The Boundary Of Regions In Thematic Map Using Flexible Ellipse Shape Region. Australian Journal of Basic and Applied Sciences, 8 (9). pp. 171-186. ISSN 1991-8178

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abd Hasim, Ahmad Shukri (2014) Implementation of space vector two-arm modulation for independent motor control drive fed by a five-leg inverter. Journal of Power Electronics (JPE), 14 (1). pp. 115-124. ISSN 1598-2092

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2014) Comparision Analysis Of Indirect Foc Induction Motor Drive Using Pi, Anti-Windup And Pre Filter Schemes. International Journal Of Power Electronics And Drive System (IJPEDS), 5 (2). pp. 219-229. ISSN 2088-8694

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2014) Comparison analysis of indirect FOC induction motor drive using PI, anti-windup and pre filter schemes. International Journal of Power Electronics and Drive Systems (IJPEDS, 5 (2). pp. 219-229. ISSN 2088-8694

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri (2014) Implementation of Space Vector Two-Arm Modulation for Independent Motor Control Drive Fed by a Five-Leg Inverter. Journal of Power Electronics (JPE), 14 (1). pp. 115-124. ISSN 1598-2092

Talib, Md Hairul Nizam and Ibrahim, Zulkifilie and Abd Rahim, Nasrudin and Abu Hasim, Ahmad Shukri and Zainuddin, Hidayat (2014) Performance improvement of induction motor drive using simplified FLC method. In: 16th International Power Electronics and Motion Control Conference and Exposition, 21-24 Sept. 2014, Antalya Turkey.

Taman, Ishak and Md Rosid, Nur Atika and Karis, Mohd Safirin and Hasim, Saipol Hadi and Zainal Abidin, Amar Faiz and Nordin, Nur Anis and Omar, Norhaizat and Jaafar, Hazriq Izzuan and Ab Ghani, Zailani and Hassan, Jefery (2014) Classification System for Wood Recognition using K-Nearest Neighbor with Optimized Features from Binary Gravitational Algorithm. In: International Conference Recent treads in Engineering & Technology (ICRET’2014), 13-14 Feb 2014, Batam (Indonesia).

Tan, CheeFai and Khalil , Siti Nurhaida and Said, Md Radzai (2014) Numerical Modeling of Air-Based Bus Seat. Applied Mechanics and Materials, 663. pp. 610-613. ISSN 1660-9336

Tan , Soo Yeen (2014) The reduction of defect on label print operation in hard disk drive assembly through lean concept. Masters thesis, UTeM.

Tayalan , Patmanathan (2014) Enhancement of vision inspection method for multiple gap products. Masters thesis, UTeM.

Tengku Ibrahim, Tengku Nadzion and Thiyagarajan, Marapan and Hasim, Saipol Hadi and Zainal Abidin, Amar Faiz and Omar, Norhaizat and Nordin, Nur Anis and Jaafar, Hazriq Izzuan and Khairuddin, Osman and Ab Ghani, Zailani and Mohd Hussein, Shamsul Faisal (2014) A Brief Analysis of Gravitational Search Algorithm (GSA) Publication from 2009 to May 2013. In: International Conference Recent treads in Engineering & Technology (ICRET’2014), 13-14 Feb 2014, Batam (Indonesia).

Teo , Chee Huat and Abd Manap, Nurulfajar (2014) Evaluation Of Stereo Matching Algorithms And Dynamic Programming For 3D Triangulation. In: Advanced Computer And Communication Engineering Technology. Springer International Publishing AG, pp. 641-650. ISBN 9783319076737

Thong, Li Wah and Kok, Swee Leong and Roszaidi, Ramlan (2014) A broadband vibration energy harvesting model for multiple cantilever beams. In: International Conference on Electronics, Information and Communications (ICEIC), , 15-18 Jan. 2014, Kota Kinabalu.

Tioh, Keat Soon and Basari, A.S.H and Hussin, Burairah (2014) Enhancement of Rotated Face Detection and Image Duplication Methods. In: MUCET2014, 10-11 NOVEMBER 2014, MAHKOTA HOTEL, MELAKA.

Tsung Heng , Chiew (2014) N-PID controller with feedforward og generalized maxwell-slip and static friction model for for friction compensation in machine tools. Masters thesis, UTeM.

U

Utomo Yusuf, Rizki Munawir and Bahaman, Nazrulazhar and Hassan, Aslinda (2014) FEASIBLE THREATS BY MANIPULATING TUNNELING PACKET ON 6TO4 NETWORK. In: International Conference on Telecommunication, Electronic and Computer Engineering (ICTEC 2015), 16 - 17 Nov 2014, Melaka, Malaysia. (Submitted)

V

Vadivelu, Shamala and Asmala, A. and Yun-Huoy, C. (2014) REMOTE SENSING TECHNIQUES FOR OIL PALM AGE CLASSIFICATION USING LANDSAT-5 TM SATELLITE. Science International, 26 (4). pp. 1547-1551. ISSN 1013-5316

Vasanthan , Sakthivelu and Chong , Shin Horng and Md Ghazaly, Mariam (2014) Modeling the Pneumatic Muscle Actuator using Phenomenological Model. In: 2nd Power and Energy Conversion Symposium (PECS) 2014, May 2014, Malaysia.

W

W. Daud, W. M. Bukhari (2014) Electromyography signal on biceps muscle in time domain analysis. Journal of Mechanical Engineering and Sciences (JMES), 7. pp. 1179-1188. ISSN 2289-4659

W. Daud, W. M. Bukhari and Wan Daud, Wan Mohd Bukhari and Bohari, Zul Hasrizal and Sulaima, Mohamad Fani and Jali, Mohd Hafiz (2014) Autonomous Mobile Wheelchair Powered Via EOG Signal Recognition. 2014 IEEE Symposium on Industrial Electronics and Applications (ISIEA). pp. 1-6. ISSN 978-1-4799-1124-0 (Submitted)

Wadhah Esmaeel, Ibraheem (2014) Impact Of Photovoltaic Systems Integration On Electricity Distribution Networks. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wahjono, Sentot Imam and Abdul Hamid, Harnida Hanim and Adilah , Mohd Din and Saleh, Hasan (2014) Management Practices Is Not Important For Women Entrepreneurs In Family Business While Enhance Their Business Performance: Evidence From Melaka, Malaysia. In: The 2nd International Conference on Business and Economics 2014, 22-23 October 2014, Padang, Indonesia.

Wahjono, Sentot Imam and Wahjoedi and Idrus, Syafei and Nirbito, J.G. (2014) SUCCESSION PLANNING AS AN ECONOMIC EDUCATION TO IMPROVE FAMILY BUSINESS PERFORMANCE IN EAST JAVA PROVINCE OF INDONESIA. Journal of Asian Scientific Research, 4 (11). pp. 649-663. ISSN e-ISSN: 2223-1331, p-ISSN: 2226-5724

Wai , Chee Mun and Rivai, Ahmad and Bapokutty, Omar (2014) Design and analysis of an aircraft composite hinge bracket using finite element approach. Applied Mechanics and Materials , 629 . pp. 158-163. ISSN 1660-9336

Waini, Iskandar and Hamzah, Khairum and Mohd Said, Rahaini and Miswan, Nor Hamizah and Zainal, Nurul Amira and Ahmad, Aminah (2014) Self-confidence in mathematics: a case study on engineering technology students in FTK, UTeM. International Journal for Innovation Education and Research, 2 (11). pp. 10-13. ISSN Nil

Wan Anor, Wan Sulaiman and Fatimah, Yussoff and Mohd Dahlan, A. Malek and Ahmad Rozelan, Yunus (2014) Effectiveness of cognitive therapy and behavior therapy treatment moddules intervention in group counseling among stress nurses. In: International Multidisciplinary Conference (IMC) 2014: Asean Economic Community: Transformation, Policy, Partnership And Action Toward Regional Prosperity, 12-13 November 2014, Jakarta.

Wan Daud, Wan Mohd Bukhari and Sulaima, Mohamad Fani and M. Nasir, Mohamad Naim and Yahaya, M. S (2014) Comparison of Eye Imaging Pattern Recognition Using Neural Network. International Conference on Mathematics, Engineering & Industrial Applications. p. 117. ISSN 2014 (Submitted)

Wan Hussin, Wan Haniza and Shibghatullah, Abdul Samad and Shahbodin, Faaizah (2014) Solving New Student Allocation Problem (NSAP) with Analytical Hierarchy Process (AHP). Science International. pp. 1659-1662. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Abdullah, Ilyana and MD FAUADI , MUHAMMAD HAFIDZ FAZLI and Ab Rahman, Mohd Nizam (2014) The Potential Of Oee Measure For Sustainable Environment In Palm Oil Mill: A Review. Sci.Int.(Lahore), 26 (5). pp. 1855-1859. ISSN ISSN 1013-5316; CODEN: SINTE 8

Wan Mahmood, Wan Hasrulnizzam and Mohamed, Norhafiza and Muhamad, Mohd Razali and Yusup, Muhamad Zaki (2014) A Review On The Interaction Component In Formulating Sustainable Supply Chain Management. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 26 (5). pp. 1631-1634. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Mohamed, Norhafiza and Muhamad, Mohd Razali and Yusup, Mohd Zaki (2014) A Pre Review On The Interaction Component In Formulating Sustainable Supply Chain Management. Science International-Lahore, 26 (5). pp. 1631-1634. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Mohd Rosdi, Mohd Noor Hanif and Muhamad, Mohd Razali (2014) Formulating The Strategy In Managing Manufacturing Complexity : A Pre-Review. Science International-Lahore, 26 (5). pp. 1849-1853. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Mohd Rosdi, Mohd Noor Hanif and Mohd Razali, Muhamad (2014) Formulating The Strategy In Managing Manufacturing Complexity. Science International-Lahore, 26 (5). pp. 1849-1853. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Saedin, Mohd Rizal and Muhamad, Mohd Razali and Abd Rahman, Mohd Soufhwee (2014) Supplier Assessment For Composites’ Product-Based Manufacturers : Case Study. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 26 (5). pp. 1647-1650. ISSN 1013-5316 (In Press)

Wan Mahmood, Wan Hasrulnizzam and Saedin, Mohd Rizal and Muhamad, Mohd Razali (2014) Supplier Assessment For Composites’ Product-Based Manufacturers: Case Study. Sci.Int.(Lahore), 26 (5). pp. 1647-1650. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Tukimin, Rahayu and Muhamad, Mohd Razali and Yusup, Muhamad Zaki (2014) Sustainable Criteria In A Supplier Selection : A Pre-Review. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 26 (5). pp. 1841-1844. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Tukimin, Rahayu and Mohd Razali, Muhamad and Yusup, Mohd Zaki (2014) The Sustainable Criteria In Supplier Selection: A Review. Science International-Lahore, 26 (5). pp. 1841-1844. ISSN 1013-5316

Wan Mahmood, Wan Hasrulnizzam and Yusup, Mohd Zaki and Salleh, Mohd Rizal and Amat, Rafidah (2014) Exploring The Impacts Of Cleaner Production On Manufacturing Sustainability In Malaysia - An Initial Study. Science International-Lahore, 26 (5). pp. 1829-1833. ISSN 1013-5316

Wan Noor Hamiza , Wan Ali (2014) Analysis and modeling of database storage optimization power consumption usage for green data centers. Masters thesis, UTeM.

Wan Nor Shela Ezwane , Wan Jusoh (2014) Design and development of iRemote Terminal Unit (iRTU) for undervoltage and overvoltage fault. Masters thesis, UTeM.

Weng Yik , Sam (2014) Design of integrated rectangular SIW filter microstrip patch antenna for wireless communications. Masters thesis, UTeM.

Wong , Kian Loon and Mohd Najib , Ali Mokhtar and Jafar, Fairul Azni (2014) Vertical Axis Wind Turbine With Magnetic Levitation Principle. Applied Mechanics and Materials, 255 (259). pp. 255-259. ISSN 1660-9336

Y

Yaakub , Juliana and Mohamad, Noraiham and ABD RAZAK , JEEFFERIE and Jano, Zanariah and Shueb, Mohamad Iqbal (2014) Cure Characteristic, Tensile and Morphological Properties of Graphene Nanoplatelets (GNPs) Filled NR/EPDM Composites. American-Eurasian Journal of Sustainable Agriculture, 2014 Special (8) (4). pp. 148-155. ISSN 1995-0748 (In Press)

Yahya , Abu Bakar and Wan Daud, Wan Mohd Bukhari and Chong , Shin Horng and Sudirman , Rubita (2014) Electromyography Signal On Biceps Muscle In Time Domain Analysis. Journal of Mechanical Engineering and Sciences (JMES), 7. pp. 1179-1188. ISSN 2289-4659

Yan Chiew , Wong (2014) Impedance matching and DC-DC converter designs for tunable radio frequency based mobile telecommunication systems. PhD thesis, UTeM.

Yasarudin, Yayah (2014) Sustainability of zero contamination defects incoming quality inspection : a case study of automated optical visual inspection. Masters thesis, UTeM.

Yasseer , Abdullah (2014) Paddy fiber as an alternative sustainable acoustic absorber material. Masters thesis, UTeM.

Yogan , Jaya Kumar and Goh, Ong Sing and Mohd Khanapi, Abd Ghani and Naomie, Salim and Ameer Tawfik, Albaham (2014) Voting Models for Summary Extraction from Text Documents. In: International Conference on Information, Management Science andApplications (ICIMSA2014), 28-30 Oct 2014, Beijing, China.

Yogan , Jaya Kumar and Naomie, Salim and Albaraa, Abuobieda and Ameer Tawfik, Albaham (2014) Multi Document Summarization Based On News Components Using Fuzzy Cross-Document Relations. Applied Soft Computing, 21. pp. 265-279. ISSN 1568-4946

Yogan Jaya , Kumar (2014) Cross document relation identification for multi document summarization based on enhanched case based reasoning framework. PhD thesis, UTeM.

Yong Seng , Cheok (2014) Fuzzy logic controlled SPMSM drives for long cable applications. Masters thesis, UTeM.

Yunus, Ahmad Rozelan and Abu, Fairus and Jabar, Juhaini and Wan Sulaiman, Wan Anor (2014) A review on technology acceptance model towards consumer participation in smart-grid. In: International Multidisciplinary Conference (IMC) 2014: Asean Economic Community: Transformation, Policy, Partnership And Action Toward Regional Prosperity, 12-13 November 2014, Jakarta.

Yunus, Ahmad Rozelan and Aris, Amir and Abdul Majid, Izaidin and Md Saad, Mohd Shamsuri (2014) Felda Youth Entrepreneurs And Personality-Environment Congruency. Journal of Technology Management and Technopreneurship, 2 (1). pp. 37-50. ISSN 2231-7996

Yuseni, Ab Wahab and Basari, A.S.H and Hussin, Burairah (2014) Replacement Model for Hostel Building Case Study: ICYM. Middle-East Journal of Scientific Research. pp. 1977-1981. ISSN 1990-9233

Yuseni, Ab Wahab and Basari, A.S.H and Hussin, Burairah (2014) REPLACEMENT MODEL FOR HIGHER EDUCATION INSTITUTION HOSTEL BUILDING MAINTENANCE IN MALAYSIA. In: 2014 5th International Conference on Manufacturing Science and Technology (ICMST 2014) , 7-8 , Sarawak.

Yusof, Ahmad Anas and Zaili , Zarin Syukri and Hassan, Siti Nor Habibah and Tee, Boon Tuan and Saadun, Mohd Noor Asril and Ibrahim, Mohd Qadafie (2014) Promoting Water Hydraulics In Malaysia : A Green Educational Approach. American Institute of Physics (AIP) Conference Proceedings, 1621 (1). pp. 241-246. ISSN 1551-7616

Yusop, Norbayah and Mohd Aris, Nor Azlan and Mohd Chachuli, Siti Amaniah and Meor Said, Maizatul Alice (2014) Characteristic of Tweek Atmospherics Observed in Mid-latitude using AWESOME VLF Receiver. Research Journal of Applied Sciences, Engineering and Technology. pp. 1-7. ISSN 2040-7459

Yusuf, Yusliza and Zulkifli, Mohd Rosli and Jariah , Mohamad Juoi and Omar, Nooririnah and Umar , Al-amani (2014) The influence of the microwave plasma nitrided Ti6Al4V substrate properties to the duplex coating performance. Applied Mechanics And Materials (doi:10.4028/www.scientific.net/AMM.761.68). pp. 68-72. ISSN 1660-9336

Yusuf, NA and Afandi, NF and Salim, MA and Misran, H and Omar, Nooririnah (2014) Mechanical and wear properties of aluminum coating prepared by cold spraying. Malaysian Journal of Microscopy, 10. pp. 118-124. ISSN 1823 7010

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Razali, Muhamad (2014) The Influence Factor for the Successful Implementation of Cleaner Production: A Review. Jurnal Teknologi, UTM, 67 (1). pp. 89-97. ISSN 0127-9696

Yusup, Mohd Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Mohd Yusof, Azrul Shahimy (2014) The Adoption Of Lean And Cleaner Production – A Preliminary Study For Malaysia Manufacturing Industry. Applied Mechanics and Materials, 660. pp. 949-953. ISSN 1660-9336

Yusup, Muhamad Zaki and Wan Mahmood, Wan Hasrulnizzam and Salleh, Mohd Rizal and Muhamad, Mohd Razali (2014) The Influence Factor For The Successful Implementation Of Cleaner Production : A Review. Jurnal Teknologi, 67 (1). pp. 89-97. ISSN 0127-9696

Z

Zabri, Normi and Cahill, Robert and Schuchinsky, Alexander (2014) Polarisation independent resistively loaded frequency selective surface absorber with optimum oblique incidence performance. IET Microwaves, Antennas & Propagation , 8 (11). pp. 1-6. ISSN 1751-8725

Zabri, S.N. and Cahill, R. and Schuchinsky, A. (2014) Ultra thin resistively loaded fss absorber for polarisation independent operation at large incident angles. In: The 8th European Conference on Antennas and Propagation (EuCAP 2014), 6-11 April 2014 , The Hague.

Zahriah, Sahri and Rubiyah, Yusof (2014) Support Vector Machine Based Fault Diagnosis Of Power Transformer Using k Nearest Neighbor Imputed DGA Dataset. Journal Of Computer And Communications, 2. pp. 22-31. ISSN 2327-5219

Zahriah, Sahri and Rubiyah, Yusof and Junzo, Watada (2014) Finnim Iterative Imputation Of Missing Values In Dissolved Gas Analysis Dataset. IEEE Transactions On Industrial Informatics , 10 (4). pp. 2093-2101. ISSN 1551-3203

Zaid , Mohd Sa'at (2014) Performance analysis of industrial robots in handling hard disk drive. Masters thesis, UTeM.

Zainal Abidin, Zaheera and Manaf, Mazani and Rosleen, Abdul Samad (2014) ant-CBIR: a new method for radial furrow extraction in iris biometric. In: SDIWC 2014, 2014, Kuala Terengganu.

Zainal Abidin, Zaheera and Manaf, Mazani and Shibghatullah, Abdul Samad (2014) ant-CBIR: a new method for radial furrow extraction in iris biometric. In: International Conference on Information Security and Cyber Forensics, 8-10 October 2014, Kuala Terengganu, Malaysia.

Zainal Abidin, Muhammad Zaimi and Kazuhiko, Noda (2014) Effect Of Coating Thickness On Corrosion Behavior Of Electroless Quaternary Nickel Alloy Deposit In 3.5 wt% NaCl Solutions. Journal Of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 83-92. ISSN 1985-3157

Zainal Abidin, Zaheera and Manaf, Mazani and Shibghatullah, Abdul Samad and Anawar, Syarulnaziah (2014) IRIS RECOGNITION FAILURE IN BIOMETRICS: A REVIEW. -. pp. 1-6. ISSN -

Zainal Ariffin, Ahmad Zainal Taufik and Mat Nuri @ Md Din, Nur Rashid and Ahmad Mansor, Mazlan and Hassan, Muhammad Zahir and Abdul Latif, Mohd Faruq (2014) Electric Car Chassis Design and Analysis by Using CATIA V5 R19. Electric car chassis design and analysis by using CATIA V5 R19. pp. 1-4. ISSN 2278-1684

Zainoddin, Muhamad Hafiy Syazwan and Chong, Shin Horng and Yahya, Abu Bakar (2014) sEMG features extraction for back muscle impairment. In: 2014 IEEE EMBS INTERNATIONAL STUDENT CONFERENCE, June 5, 2014, Universiti Putra Malaysia.

Zainodin, Aznilinda and Ab. Kadir, Aida Khairunnisaa and Ayob, M Nasir and Hassan, Ahmad Fariz and Zainal Abidin, Amar Faiz and Zahid, Fazlinashatul Suhaidah and Jaafar, Hazriq Izzuan and Mohd Khairuddin, Ismail (2014) An Experimental Study Of Combinational Logic Circuit Minimization Using Firefly Algorithm. In: Colloquium on Robotics, Unmanned Systems And Cybernetics 2014 (CRUSC 2014), 20 November 2014, Universiti Malaysia Pahang, Pekan, Pahang, Malaysia.

Zakaria, Kamarul Ariffin (2014) Fatigue strain signal behaviour and damage assessment of an engine mount bracket. Journal of scientific & Industrial Research . pp. 112-6. ISSN 0975-1084

Zakaria, Zahriladha and Muhamad Fadzil, Muhamad Fadhli and Othman , Abdul Rani and Salleh, Azahari and Awang Md Isa, Azmi and Haron, Nor Zaidi (2014) Development Of Wideband Power Amplifier For RF/Microwave Front-End Subsystem. Jurnal Teknlogi, 68 (3). pp. 105-112. ISSN -

Zakaria, Zahriladha and Mutalib, Mohamad Ariffin and Mohamad Isa, Mohd Sa'ari and Abdul Latiff, Anas and Zainuddin, Nur Aishah and Sam, Weng Yik (2014) Generalized Chebyshev Highpass Filter Based On Suspended Stripline Structure (SSS) For Wideband Applications. Jurnal Teknlogi, 68 (3). pp. 27-31. ISSN -

Zamre , Abd. Ghani (2014) Development of dspace-based fuzzy logic three-phase inverter controller for photovoltaic application enhancement. PhD thesis, UTeM.

Zareena , Rosli (2014) The development and testing of educational game in problem based learning in learning mathemathics. (PBLMath). Masters thesis, UTeM.

Zatul Alwani , Shaffiei (2014) Optimizing driver scheduling for UTeM shuttle bus using harmony search. Masters thesis, UTeM.

Zikri Abadi, Baharudin (2014) Characterizations Of Ground Flashes From Tropic To Northern Region. PhD thesis, Universiti Teknikal Malaysia Melaka.

Zilawati Roslinda , Mohd Zain (2014) The design and effectiveness of 3D courseware with constructivism and contextual approach. Masters thesis, UTeM.

ZulFadli , Zailan and Seri Rahayu , Kamat and Muhamad Arfauz, A Rahman and Norhidayah, Hashim (2014) Design of an ergonomic acquisition and monitoring framework in assembly task. In: International Conferance in Concurrent and Design Engineering (iDECON 2014), 20 and 21 September 2014, Melaka.

Zulkafli, Nur Izyan and Mahadzir, Shuhaimi and Muhammad, Noryani and Abdul Hadi, Dayanasari (2014) MINLP Model for Simultaneous Scheduling and Retrofit of Refinery Preheat Train. International Journal of Energy and Environment, 5 (2). pp. 197-206. ISSN 2076-2909

Zuraidah , Zainudin (2014) Multi objectives optimization of cutting parameters in machining cellulose based hybrid composites. Masters thesis, UTeM.

Zurina , Saaya (2014) Using recommendations in content curation. PhD thesis, UTeM.

This list was generated on Thu Oct 1 22:30:51 2020 +08.