Items where Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items: 512.

A

A Rahman, Muhamad Arfauz and Mohamad, Nor Rizan and Mustafa, Zaleha and Ismail, Syahriza and Abdul Rahman, Azrul Azwan and Abdullah, Shariman and Mohamad, Effendi and Nordin, Mohd Hisham and Salleh, Mohd Rizal (2018) Design Of Compact Pre-Pregger Machine For In House Production Of Pre-Preg Material. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 437-449. ISSN 1985-3157

A. Jalil, Intan Ermahani and Shamsuddin, Siti Mariyam and Muda, Azah Kamilah and Azmi, Mohd Sanusi and Ummi Rabaah, Hashim (2018) Predictive Based Hybrid Ranker To Yield Significant Features In Writer Identification. International Journal Of Advances In Soft Computing And Its Applications, 10 (1). pp. 1-23. ISSN 2074-8523

A. Perumal, Puvanasvaran and M. N. H., Ab. Hamid and Yoong, Sai Sieng (2018) Cycle Time Reduction For Coil Setup Process Through Standard Work: Case Study In Ceramic Industry. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 210-220. ISSN 1819-6608

Ab Aziz, Ab Wafi and Rahim, Norain and Mohd Tumari, Mohd Zaidi and Abdul Kadir, Ahmad Muzaffar and Abd Rashid, Wan Norhisyam and Ainol Bakri, Ainol Sheqal (2018) Experimental Study On Efficiency Of DC And AC Power Supply Travel Kit Using Solar Panel. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 105-109. ISSN 2289-8131

Ab Aziz, Ab Wafi and Ghazali, Rozaimi and Chong, Chee Soon and Saadon, Intan Mastura and Omar, Mohd Firdaus and Aripin, Muhamad Khairi (2018) Robust Direct Yaw Moment For Optimal Control Using PSO In Step Steering Manoeuvre. International Journal Of Mechanical Engineering And Technology (IJMET), 9 (11). pp. 1789-1798. ISSN 0976-6340

Ab Ghani, Rosmikaida (2018) Adoption Of Open Innovation (OI) Increases The Innovativenss Among Small And Medium-Sized Enterprises (Smes) In Food And Beverage (FNB) Industry In Melaka. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Ab Hadi, Nik Azran and A. Subki, A. Shamsul Rahimi and Abd Rashid, Wan Norhisyam and Jidin, Aiman Zakwan and Tan, Sze Ying (2018) Development Of Portable Air Conditioning Using Peltier Effect For Small Area Uses. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 99-103. ISSN 2289-8131

Ab Hadi, Nik Azran and Kadmin, Ahmad Fauzan and A Aziz, Khairul Azha and Abd Rahman, Mohd Soufhwee and Abd Razak, S. S. and Salehan, M. Z. and Abdul Hadi, N. A. and Hamzah, Rostam Affendi and Abd Rashid, Wan Norhisyam (2018) Performance Analysis Of Neural Network Model For Automated Visual Inspection With Robotic Arm Controller System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 19-22. ISSN 2180-1843

Ab Hadi, Nik Azran and Manimaran, Vasantha Kumaran and Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Mohd Ab Halim, Mohd Firdaus and Mohamad Sapiee, Mohd Razali (2018) Development Of Smart Home System Using Arduino With Mobile Application. Journal In Engineering,Sciences And Technology, 1. pp. 1-10. ISSN 2215-0986

Ab Hadi, Nik Azran and Mohd Annuar, Khalil Azha and Mohammad Azmi, Mohamad Azim and Salleh, Azahari and Mohd Ab Halim, Mohd Firdaus and Abd Rashid, Wan Norhisyam and Mohd Noh, Mohd Syahrin Amri (2018) Investigating The Power Quality Improvement On Laboratories Equipment Base On Voltage And Current Analysis. Journal Of Advanced Research In Dynamical And Control Systems, 10-spe. pp. 1409-1422. ISSN 2180-1843

Ab Hadi, Nik Azran and Mohd Annuar , Khalil Azha and Harun , Mohamad Haniff and Mohd Ab. Halim, Mohd Firdaus and Mirin, Siti Nur Suhaila and Azahar, Arman Hadi (2018) Dynamic Modelling And Analysis Of 3D Overhead Gantry Crane System. International Journal Of Engineering & Technology, 7. pp. 1257-1262. ISSN 09754024,23198613

Ab Maulod, Hairul Effendy and Mohamad, Noraiham and Shamsuri, Siti Rahmah and Ahsan, Qumrul and Mohd Abid, Mohd Asyadi ‘Azam and Zainal Abidin, Muhammad Zaimi and Abdollah, Mohd Fadzli (2018) Tribological Behaviour Of GreenCarbon Fibre Waste Reinforced Thermoplastic Composites Prepared Via Melt Mixing. [Technical Report] (Submitted)

Ab Rahman, Azhan and Mohd Zambri, Mohd Khairi and Wan Mohd Kamil, Wan Nur Syahirah and Ramli, Mohd Zulkifli and Bohari, Zul Hasrizal (2018) Optimum sizing of GCPV system under tropical condition. Journal Of Fundamental And Applied Sciences, 10 (3S). pp. 1142-1159. ISSN 1112-9867

Ab Rahman, Mohd Hidayat and Maidin, Nurul Ain and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Razali, Muhammad Zayani Afiq (2018) A Prototype Development Of Anti-Hunchback Device. Journal of Mechanical Engineering, SI5(1). pp. 192-209. ISSN 1823-5514

Ab Razak, Juhari and Musa, Masjuri and Mohd Tahir, Musthafah and Mohamad, Imran Syakir and Othman, Md Nazri (2018) Small Scale Hydro Turbines For Sustainable Rural Electrification Program. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 49 (2). pp. 138-145. ISSN 2289-7879

Ab Wahab, Norfariza and Abd Rahim, Abdul Fattah and Nordin, Abd Khahar and Bidin, Basri and Ibrahim, Mohd Azimin and Zahari, Madiha and Abd Mutalib, Nurliyana (2018) Development of portable linear positioning table for drilling machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 809-813. ISSN 1819-6608

Ab Wahab, Norfariza and Abdul Rani, Muhammad Haris and Nordin, Abd Khahar and Nordin, Nor Fauzi and Ibrahim, Mohd Azimin and Basar, Mohd Farriz and Boejang, Hambali (2018) Design and development of fixable clamping for milling machine based on machining performance. International Journal Of Applied Engineering Research, 13 (1). pp. 576-581. ISSN 0973-4562

Ab Wahab, Norfariza and Md. Rozali, Sahazati and Abdul Rahman, Nabil Haikal and Nordin, Abd Khahar and Che Amran, Aliza and Mohamad Saleh, Saleha (2018) Design Optimization And Development Of Portable Vacuum Clamping (VacCLAMP) Based On Machining Performances. International Journal Of Engineering & Technology, 18 (01). pp. 11-16. ISSN 2227-2712

Ab Wahab, Norfariza and Mohd Saleh, Afferry and Nordin, Abd Khahar and Tamin, Nor Fauzi and Ibrahim, Mohd Azimin and Ahmad, Suziana and Abdul Hadi, Dayanasari (2018) Development Of Portable Magnetic Clamping For Lathe Machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 902-906. ISSN 1819-6608

Ab Wahab, Norfariza and Mohd Shuhada, Muhammad Khusyairi and Nordin, Abd Khahar and Md Basar, Mohd Farriz and Boejang, Hambali and Mohd Najib, Suhaila and Mohd Nor, Rozilawati (2018) Design And Development Of New Clamping Method For Waterjet Machine (JetCLAMP) Based On Machining Performances. International Journal Of Engineering & Technology (IJET), 18 (01). pp. 1-5. ISSN 2227-2712

Abal Abas, Zuraida and Mohd Salleh, Siti Khadijah and O’Donoghue, Diarmuid and Shibghatullah, Abd Samad (2018) Varying Variants For AncDE With MDV Between Target And Trial Vector Measurement. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 155-160. ISSN 2180-1843

Abd Aziz, Norfarhana (2018) Electrical And Thermomechanical Properties Of Epoxy Filled Hybrid Covalent Treated MWCNTs/GNPs Nanocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Aziz, Syazxerlin (2018) Prediction Of Tool Wear Characteristics In Turning On Inconel 718 : Experimentation And Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahim, Muhamad Akliff (2018) Performance Enhancement With Triangular Loop Frequency Selective Surface On Microstrip Array Antenna For 5G Application. Masters thesis, UTeM.

Abd Rahim, Toibah and Misran, F. and Mustafa, Zaleha and Shaaban, Azizah and Shamsuri, Siti Rahmah (2018) Calcium Phosphate From Waste Animal Bones:Phase Identification Analysis. Journal Of Advanced Manufacturing Technology, 12. pp. 97-109. ISSN EISSN: 2289-8107

Abd Rahman, M.N. and Medjahed, Brahim and Orady, Elsayed A. and Muhamad, Martini Ridha and Abdullah, Rohana and Mohamad Jaya, Abdul Syukor (2018) A Review Of Cloud Manufacturing: Issues And Opportunities. Journal of Advanced Manufacturing Technology (JAMT), 12 (1). pp. 61-75. ISSN 1985-3157

Abd Rahman, Md Nizam and Muhamad, Mohd Razali and Sulaiman, Mohd Amri and Hashim, Zarifah Syazana and Fadzil, Ahmad Anuar and Budi, Esmar (2018) Copper Layer Sheet Resistance Evolution As A Function Of Post-Seed Process Self-Annealing Time. Journal of Advanced Manufacturing Technology, 12 (SI4). pp. 15-24. ISSN 1985-3157

Abd Rashid, Shafiyah (2018) Development Of Finger Type Tactile Sensor With Surface Roughness Analysis. Masters thesis, UTeM.

Abd Razak, Jeefferie and Noor, N. A.M. and Ismail, Syahriza and Mohamad, Noraiham and Lau, Kok Tee and Munawar, Rose Farahiyan and Junid, Ramli (2018) Review On Carbon Nanotube Based Polymer Composites And Its Applications. Journal of Advanced Manufacturing Technology, 12 (1(1)). 311 - 326. ISSN 1985-3157

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2018) Performance Of Parameter-Magnitude Based Information Criterion In Identification Of Linear Discrete-Time Model. Journal Of Fundamental And Applied Sciences, 10 (3S). pp. 345-354. ISSN 1112-9867

Abd Samad, Sofian (2018) An Effect Of Surface Roughness To Colour Sensor Detection Range In Ambient Temperature. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdollah, Mohd Faizal and Abdullah, Raihana Syahirah and S.M.M Yassin, S.M. Warusia Mohamed and Selamat, Siti Rahayu and Mohd Saudi, Nur Hidayah (2018) An Analysis Of System Calls Using J48 And JRip For Malware Detection. Journal of Theoretical and Applied Information Technology, 96 (13). pp. 4294-4305. ISSN 1992-8645

Abdollah, Mohd Faizal and A Alshnta, Abdalkrim Mustfa and Al-Haiqi, Ahmed Mubarak (2018) SDN In The Home : A Survey Of Home Network Solutions Using Software Defined Networking. Cogent Engineering, 5. p. 1469949. ISSN 2331-1916

Abdollah, Mohd Faizal and Abdullah, Raihana Syahirah and S. M. M Yassin, S. M. Warusia Mohamed and Selamat, Siti Rahayu and Mohd Saudi, Nur Hidayah (2018) An Analysis Of System Calls Using J48 And JRip For Malware Detection. Journal of Theoretical and Applied Information Technology, 96. pp. 4294-4305. ISSN 1992-8645

Abdul Hamid, Hanifah (2018) Information security behaviour assessment in software-as-a-service cloud environment. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Kadir, Faizul Akmar (2018) Vehicle speed control using MRAC PID strategy for gradient disturbance rejection. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Latiff, Anas and Al-Masoodi, Ahmed Hasan Hamood and Ahmed, Mahmoud Hazzaa M. and Arof, Hamzah and Harun, Sulaiman Wadi (2018) Nickel Oxide Nanoparticles Thin Film Saturable Absorber For 1-Micron Pulsed All-Fibre Lasers Operation. Journal Of Modern Optics, 65. pp. 1801-1808. ISSN 0950-0340

Abdul Mubin, Ayu Nurfatika (2018) Proton Exchange Membrane Fuel Cell Model Validation Using Equivalent Electrical Circuit. Masters thesis, UTeM.

Abdul Munir, Fudhail and Zainol, Sabri Adlan and Abdul Munir, Fudhail and Mahlia, Teuku Meurah Indra and Masjuki, Hassan (2018) Effects Of Equivalence Ratio On Performance And Emissions Of Diesel Engine With Hydrogen And Water Injection System At Variable Injection Timing. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (6). pp. 106-111. ISSN 2227-2771

Abdul Mutalip, Zaiton and J., Faezah and Rihawi, Zeina S. (2018) Orientation Effects For LOS And NLOS OWC Characterisation Within Small Structures. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 119-123. ISSN 2180-1843

Abdul Rahim, Mohd Aidil Shah and Minhat, Mohamad and Hussein, Nur Izan Syahriah (2018) Current Research Trends In Wire Electrical Discharge Machining (WEDM): A Review. Journal of Advanced Manufacturing Technology (JAMT), 12 (1). pp. 11-23. ISSN 2289-8107

Abdul Rahman, Ahmad Idil and Baharudin, Zikri Abadi and Bahari, Muhammad Akmal and Zulkefle, Ahmad Aizan and Zainon, Maslan and Mat Hanafiah, Mohd Ariff (2018) Sub microsecond analysis of negative cloud-to-ground lightning flashes. Indonesian Journal Of Electrical Engineering And Computer Science, 11 (2). pp. 711-717. ISSN 2502-4752

Abdul Rahman, Fatiha (2018) Designing a solar collector using f-chart method for domestic hot water in Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahman, Nor Nabilah Syazana (2018) Automated Vision-Based Beverage Bottle Quality And Level Inspection System. Masters thesis, UTeM.

Abdul Rahman, Nur Fatin Syairah (2018) The Effectiveness Implementation Of Energy Efficiency In Government Office Building Study Case At Wisma Negeri Melaka. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rashid, Nurulizwa and Alzahrani, N. F. and Al-Shami, Samer Ali Hussein (2018) The Relationship Between Training Development Process And Employees. Journal Of Fundamental And Applied Sciences, 10 (6S). pp. 2616-2633. ISSN 1112-9867

Abdul Rasib, Amir Hamzah and Mohamad Rafaai, Zubaidi Faiesal and Muhamad Zuki, Mohd Shafinaz (2018) Enhancing E-Commerce To Sustain Economy In Malaysia:Short Review. International Journal Of Science And Business, 2. pp. 718-724. ISSN 2520-4750/2521-3040

AbdulAziz Alneaimi, Hozaifah (2018) Quality Enhancement In Production Of Safety Pins Through The Implementation Of Kaizen Activity. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Abdul Rahim and Ahmad Izzuddin, Tarmizi and Jali, Mohd Hafiz and Sudirman , Rubita (2018) Gaze Tracking Algorithm Using Night Vision Camera. Indonesian Journal Of Electrical Engineering And Computer Science, 9. pp. 438-446. ISSN 2502-4752

Abdullah, Abdul Rahim and Hussin, Adibah Syahirah and Wei Hown, Tee and Mohd Saad, Norhashimah and Jopri, Mohd Hatta and Sutikno, T (2018) Harmonic Load Diagnostic Techniques And Methodologies:A Review. Indonesian Journal Of Electrical Engineering And Computer Science, 9. pp. 690-695. ISSN 2502-4752

Abdullah, Abdul Rahim and Mohd Noor, Nor Shahirah and Mohamad Basir, Muhammad Sufyan Safwan and Abdul Rahman, Nor Nabilah Syazana and Mohd Saad, Norhashimah and Hassan, Mai R.M. (2018) Automated Real-Time Vision Quality Inspection Monitoring System. Indonesian Journal Of Electrical Engineering And Computer Science, 11. pp. 775-783. ISSN 2502-4752

Abdullah, Herryanni (2018) Designing a home fertigation system using coco peat. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Ilyana (2018) A New Equipment Effectiveness And Sustainability Performance Model For Palm Oil Mill. Doctoral thesis, UTeM.

Abdullah, Lokman and Anang, Nur Amira and Jamaludin, Zamberi and Chiew, Tsung Heng and Maharof, Madihah and Syed Salim, Syed Najib and Retas, Zain (2018) Analysis Of Nonlinear PID Controller For Tracking Performance Of Ball Screw Drive. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-2). pp. 67-71. ISSN 2180-1843

Abdullah, Mohd Firdaus and Md Yusof, M. K. and Nazarudin, M. N. and Abdullah, M. R. and Maliki, A. B. H. M. (2018) Motivation And Involvement Toward Physical Activity Among University Students. Journal Of Fundamental And Applied Sciences, 10 (1S). pp. 412-431. ISSN 1112-9867

Abdullah, Muhammad Azfar (2018) Green Service Management At High Technology Service Industry : A Case Study At Airasia Airline. Doctoral thesis, UTeM.

Abdullah, Norida and Hussin, Hanipah and Khoo, Nee Kah (2018) Occupational Safety And Health (OSH) Towards Environment Mainstream Tool Practices (EMT) At Malaysia Small And Medium Manufacturing Sector. The Turkish Online Journal Of Design, Art And Communication, 1. pp. 3101-3113. ISSN 2146-5193

Abdullah, Norida and Hussin, Noraini and Shonubi, Olurotimi Adebayo and Ghazali, Siti Raudzah and Abu Talib, Mansor (2018) Career Decision-Making Competency,Self-Knowledge,And Occupational Explorations:A Model For University Students. Journal Of Technical Education And Training (JTET), 10 (1). pp. 71-81. ISSN 2229-8932

Abdullah, Nurshawanis (2018) Implementation Of Green Advertising Media To Influence Consumer Buying Behavior On Computer Product At Kelantan. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Rohana and Hashim, Hanizam and Abd Rahman, Md Nizam and Salleh, Mohd Rizal (2018) Development Of Enterprise Human System Modelling Framework In Support Of Cellular Manufacturing Lean Operation. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 235-245. ISSN 1985-3157

Abu, Nur Azman and Abdul Latip, Shekh Faisal and Sahib @ Sahibuddin, Shahrin (2018) Evaluation Criteria On Ambience-Based True Random Number Generators. International Journal of Cryptology Research, 8 (1). pp. 54-76. ISSN 1985-5753

Abu Bakar, Mohd Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Adam, Abdul Aziz and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool. MATEC Web Of Conferences, 150. pp. 1-5. ISSN 2261-236X

Abu Hassan, Mahadi and Kudus, Norliah and Sidek, Safiah and Mohamed, Shahrulanuar and Aripin, Muhamad Afzamiman (2018) Factors That Influence The Sustainability Of IoT Usage For Smart Living. International Journal Of Pure And Applied Mathematics, 119. pp. 573-587. ISSN 1314-3395

Abu Hassan, Mahadi and Kudus, Norliah and Sidek, Safiah and Mohamed, Shahrulanuar and Aripin, Muhamad Afzamiman (2018) Implementation Of Learning Organization Among Human Resource In Universities. International Journal Of Pure And Applied Mathematics, 119. pp. 589-603. ISSN 1314-3395

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2018) Stress analysis of automobile steering knuckle using finite element method. International Journal Of Engineering & Technology, 7 (317). pp. 28-30. ISSN 2227-524X

Adebiyi, Opeyemi Olajide and Mohamad, Norhidayah and Ahmad Murad, Murzidah and Md Isa, Mohamed Hafiz and Cruz, M. D. (2018) Profiling the promotion of green technology in industry through GTFS. Journal Of Fundamental And Applied Sciences, 10 (6s). pp. 2572-2581. ISSN 1112-9867

Adnan, Nor Hafizah (2018) Effect Of Fiber Orientation And Composition Percentage To The Properties Of Particle Board From Banana Fiber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahamat, Amiruddin and Shahkat Ali, Muhamad Sham and Zahari, Nor Akmal Nabihah (2018) The Effects Of Brand Image In Purchasing Of Online Marketing Among University Students. International Journal Of Enterprise Network Management, 9 (3/4). pp. 390-406. ISSN 1748-1252

Ahamat, Amiruddin and Shahkat Ali, Muhamad Sham (2018) Internationalization Process Of Firms From Developing Country:An Empirical Evidence Of UAE Family Business Firms. International E-Journal of Advances in Social Sciences, 4 (10). pp. 100-106. ISSN 2411-183X

Ahmad, Asmala and Abu Sari, Muhammad Yazid and Abdul Hamid, Nurmi-Rohayu and Abd Ghani, Zarawi and Mahsuri, Ikhsan and Mohd Yusoff, Muhammad Asraff and Rasib, Abd Wahid and Mohd Yusoff, Abdul Razak and Abdul Rahman, Muhammad Zulkarnain and Wan Kadir, Wan Hazli and Zainon, Othman and Dollah, Rozilawati (2018) Rubber leaf disease detection from low altitude remote sensing techniques. Advanced Science Letters, 24 (6). pp. 4281-4285. ISSN 1936-6612

Ahmad, Asmala and Kasmin, Fauziah and Syed Ahmad, Sharifah Sakinah and Abu Sari, Mohd Yazid and Mustapha, Muhammad Amin and Othman, Zuraini (2018) Comparison Between Edge Detection Methods On UTeM Unmanned Arial Vehicles Images. MATEC Web Of Conferences, 150. pp. 1-6. ISSN 2261-236X (In Press)

Ahmad, Asmala and Nemeah, Ali Fahem and Mohammed, Hassan (2018) A Review Of Adoption Of E-Learning In Middle East Countries. Journal Of Software Engineering & Intelligent Systems (JSEIS), 3 (1). pp. 61-66. ISSN 2518-8739

Ahmad, Asmala and Pramudya Ananta, Gede and Yusof, Norzihani and Ruslan, Siti Nur Azreen and Mohd Noor, Helmi Adly and Razali, Sharifah Nadiyah (2018) Using Experimental Design In Assistive Learning Technology Trials: An Experience-Based Review. MATEC Web of Conferences, 150. pp. 1-6. ISSN 2261-236X

Ahmad, Ibrahim and Abdullasim, Nazreen and Mohd Suaib, Norhaida (2018) Usability Testing On Game Interface Design Using Video-Based Behavior Analysis. International Journal Of Engineering And Technology (UAE), 7. pp. 142-145. ISSN 2227-524X

Ahmad, Nadiah and Halim, Isa and Radin Umar, Radin Zaid and Jamli, Mohamad Ridzuan and Syed Mohamed, Muhammad Syafiq and Albawab, Tarek Mhd Moataz and Abdullah, Muhammad Haziq Lim and Padmanathan, Vinothini (2018) Usability Study Of Integrated Rula-Kinect System For Work Posture Assessment. International Journal Of Integrated Engineering, 10. pp. 175-184. ISSN 2229-838X

Ahmad, Nazrul Muhaimin (2018) Passive Client-Centric Rogue Access Point Detection Framework For WiFi Hotspots. Doctoral thesis, UTeM.

Ahmad, Rabiah and Abd Hamid, Nazirah and Selamat, Siti Rahayu (2018) Role Minimization As An Optimization Metric In Role Mining Algorithms : A Literature Review. International Journal Of Engineering & Technology, 7. 306-310 . ISSN 2227-524X

Ahmad, Suraya (2018) A Framework For Sustaining Lean Thinking With Systems Thinking In Malaysian Aerospace Companies. Doctoral thesis, UTeM.

Ahmed Al-Kaiali, Suhaib Salam Mohammed and Omar, Rosli and Sulaiman, Marizan and Al-Hiealy, Mohammed Rasheed Jubair (2018) Aggregated Modelling Analysis Of Power Flow From Wind Power Plant Into Grid System Using MATLAB/ SIMULINK Software. ARPN Journal Of Engineering And Applied Sciences, 13 (4). pp. 1163-1172. ISSN 1819-6608

Ahmed Alqadhi, Ahmed Abdullah (2018) Design and development of an optimized mixed mode solar dryer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ai Peng, Chan (2018) The Customer Perception Influence The Purchase Intention Of Milo Breakfast Cereals. UNSPECIFIED thesis, UTeM.

Al-Akash, Omar Mahmoud Nayef and Syed Ahmad, Sharifah Sakinah and Azmi, Mohd Sanusi (2018) Fuzzy Distance Measure Based Affinity Propagation Clustering. International Journal Of Applied Engineering Research, 13 (2). pp. 1501-1505. ISSN 0973-4562

Al-Gumaei, Mohammed Yahya Qaid (2018) Design and analysis of single balanced diode mixer for UWB applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Heety, Othman S. and Ismail, Mahamod and Zakaria, Zahriladha and Altahrawi, Mohammed A. (2018) Performance Evaluation Of Peak-To-Average-Power Ratio Reduction Techniques In OFDM. International Journal Of Engineering Research And Technology, 11 (4). pp. 575-593. ISSN 0974-3154

Al-Hiealy, Mohammed Rasheed Jubair (2018) Modified cascaded H-bridge multilevel inverter using particle swarm optimization. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Al-Mhiqani, Mohammed Nasser Ahmed and Ahmad, Rabiah and S. M. M Yassin, S. M. Warusia Mohamed and Hassan, Aslinda and Zainal Abidin, Zaheera and Al-BaChaChee, Nabeel Salih Ali and Al-Aridhee, Karrar Hameed Abdulkareem (2018) Cyber-Security Incidents: A Review Cases In Cyber-Physical Systems. International Journal Of Advanced Computer Science And Applications (IJASCA), 9 (1). pp. 499-508. ISSN 2158-107X

Al-Shami, Samer Ali Hussein and Razali, R. M. and Abdul Rashid, Nurulizwa (2018) The Effect Of Microcredit On Women Empowerment In Welfare And Decisions Making In Malaysia. Social Indicators Research, 137 (3). pp. 1073-1090. ISSN 0303-8300

Al-Shami, Samer Ali Hussein and Aziz, H. and Abd. Rashid, Nurulizwa (2018) The Adoption Of MOOC Utilization Among Undergraduate Students In Universiti Teknikal Malaysia Melaka (UTeM). Journal Of Fundamental And Applied Sciences, 10. pp. 2634-2654. ISSN 1112-9867

Alareqi, Khaldon Ahmed Qaid (2018) Analysis of generator ratings on inertia and frequency respone in power systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Algaet, Mustafa Almahdi (2018) Enhancement Of Medical Image Compression Algorithm In Noisy WLANS Transmission. Doctoral thesis, UTeM.

Ali, Mohd Basri and Sugumar, Dharmalingam and Shafie, Azhar and Mohd Daud, Mohd Ahadlin and Zakaria, Kamarul Ariffin and Abd Latif, Mohd Juzaila (2018) Implementation Of Automation Process In Generating Cad Model For Rim Wheel. ARPN Journal Of Engineering And Applied Sciences, 13 (2). pp. 594-598. ISSN 1819-6608

Ali Hussein Aboali, Maged Yahya (2018) Enhanced Image View Synthesis Using Multistage Hybrid Median Filter For Stereo Images. Masters thesis, UTeM.

Ali Mokhtar, Mohd Najib and Abdullah, Mohd Zulkifly and Saad, Abdullah Aziz and Che Ani, Fakhrozi and Samsudin, Zambri (2018) Reliability Assessment Of Self-Alignment Assemblies Of Chip Component After Reflow Soldering Process. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) . pp. 1-7. ISSN 2180-1843 (In Press)

Alkahari, Mohd Rizal and Mazlan, Siti Nur Humaira and Ramli, Faiz Redza and Maidin, Nurul Ain and Sudin, Mohd Nizam and Zolkaply, Ardzatul Ruziah (2018) Surface Finish And Mechanical Properties Of Fdm Part After Blow Cold Vapor Treatment. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48. pp. 148-155. ISSN 2289-7879

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Faudzie, M. S. M and Nazan, Muhammad Afdhal and Sudin, Mohd Nizam and Mat, Shafizal and Khalil, Siti Nurhaida (2018) Dimensional Accuracy And Surface Roughness Of Part Features Manufactured By Open Source 3D Printer. ARPN Journal Of Engineering And Applied Sciences, 13. p. 1139. ISSN 1819-6608

Almajdup, Salleh A.A (2018) Design of a PV-diesel hybrid system with unreliable grid connection in Kampung Lb Johnson Village, Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alsultani, Hamid Sadeq Mahdi and Kadhim Al-Zaidi, Qusay Kanaan and Taha Ahmed, Shaymaa and Khadhim, Ban Jawad (2018) The Use Of Spatial Relationships And Object Identification In Image Understanding. International Journal Of Civil Engineering And Technology (IJCIET), 9 (5). pp. 487-496. ISSN 0976-6308

Amad Nasar, Ahmad Haikal (2018) The Relationship Between Transformational Leadership And Group Cohesiveness. UNSPECIFIED thesis, UTeM.

Amat, Noor Faridah (2018) Fabrication Of Solar Fabric Using Titanium Dioxide Nanowires Based On Dye Sensitized Solar Cell Technique. Masters thesis, UTeM.

Aminuddin, Nur Shazwani (2018) Development Of Algorithms For Vehicle Classification And Speed Estimation From Dynamic Scenes By On-Board Camera Using Image Processing Techniques. Masters thesis, Universiti Teknikal Malaysia Melaka.

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2018) Investigation Of The Pressure Ratio And Efficiency Of A Turbocharger Centrifugal Compressor With A Vaned Diffuser. World Review Of Science, Technology And Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242

Amran, Nur Syahirah (2018) Customer Satisfaction Towards Food Truck Service At Melaka State, Malaysia. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Anang, Nur Amira (2018) Design Of Cascade NP/PI Controller For Cutting Force Compensation Of Ball Screw Driven System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aripin, Muhamad Afzamiman and Al-Shami, Samer Ali Hussein and Mohd Hisham, M.H. and Hamzah, R. (2018) Index Of Instructional Sensitivity Of Holistic Approach Training Module For Malaysian TVET Instructors In Prison. International Journal Of Human And Technology Interaction (IJHaTI), 2 (1). pp. 13-17. ISSN 2590-3551

Asih, Hayati Mukti (2018) Capacity Planning For Mixed-Load Tester Under Demand And Testing Time Uncertainty. Doctoral thesis, UTeM.

Awang, Nurfadzylah (2018) Implementation of vision system for defects classification method using international standard welding imperfection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhar, Emmy Nurulazwana (2018) Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aziz, Azimi (2018) The Challenges Toward Innovation In Small Medium Enterprise : A Case Study Food And Beverage In Melaka. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Aziz, Nusra Izzaty (2018) The relationship between foreign direct investment (FDI) and economic growth in Malaysia. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Azizan, Nur Anis Aniza (2018) Educational Entrepreneurship : The Relationship Between Organizational Structure And Innovation. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Azman, Farah Nadia and Zaibon, Syamsul Bahrin and Shiratuddin, Norshuhada (2018) Modelling Learner-Generated Comic Production:An Initial Design. Journal of Engineering and Applied Sciences, 13. pp. 2237-2241. ISSN 1816-949X

Azman, Nurul Amira Irfa (2018) The Study Of Communication Medium That Influence Staff Engagement Relationship In Petronas, Malaysia. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Aini Noor Liana (2018) Analysis Of Wearable Antenna Using Electromagnetic Band Gap Under Bending Conditions. Masters thesis, UTeM.

Azmi, Fadhlur Rahim and Musa, Haslinda and Shahbodin, F. and Hasan, Hazmilah and Fam, Soo Fen (2018) Green Human Resource Management: A Case Of Malaysia. IOSR Journal of Business and Management (IOSR-JBM), 20 (3). pp. 77-80. ISSN 2319-7668

Azmi, Mohd Sanusi and Draman @ Muda, Azah Kamilah and Draman @ Muda, Noor Azilah and Arbain, Nur Atikah and Radzid, Amirul Ramzani and Nordin, Radzuan (2018) Web-based dynamic similarity distance tool. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. 11 - 15. ISSN 2289-8131

B

B. Rajendran, Saravaaneshwaran (2018) Reduction of retaping lots for TPMS production line using Six Sigma. Masters thesis, Universiti Teknikal Malaysia Melaka.

Babu, V.Ramesh and Sreenadh, S. and Arunachalam, P. V. (2018) Peristaltic transport of a viscous fluid in a porous channel with suction and injection. Ain Shams Engineering Journal, 9 (4). pp. 909-915. ISSN 2090-4479

Badaruddin, Nur Izayu (2018) Optimization of secondary bonding in layup process based on six sigma method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bafjaish, Salem Saleh and Azmi, Mohd Sanusi and Al-Mhiqani, Mohammed Nasser and Radzid, Amirul Ramzani and Mahdin, Hairulnizam (2018) Skew detection and correction of mushaf Al-Quran script using hough transform. International Journal Of Advanced Computer Science And Applications (IJASCA), 9 (8). pp. 402-409. ISSN 2158-107X

Bahar, Mohd Bazli and Miskon, Muhammad Fahmi and Mohd Aras, Mohd Shahrieel and Ali @ Ibrahim, Fariz and Anwar Apandi, Nur Ilyana and Mohd Shaari Azyze, Nur Latif Azyze and Zainal, Siti Aishah and Too, Jingwei W. (2018) Analysis of spinal electromyography signal when lifting an object. International Journal Of Engineering & Technology (UAE), 7 (3.14). pp. 414-418. ISSN 2227-524X

Bahari, Norzalizah (2018) Entrepreneurial characteristics and firm performance of small and medium enterprises in Malaysian food manufacturing industry. Masters thesis, UTeM.

Bahari, Norzalizah and Yunus, Ahmad Rozelan and Abdul Jabar, Juhaini and Mohd Yusof, Sitinor Wardatulaina (2018) Entrepreneur characteristics and firm performance: A study on Malaysian food manufacturing industry SMEs. IOSR Journal Of Humanities And Social Science (IOSR-JHSS), 23 (2). pp. 92-98. ISSN e-ISSN: 2279-0837, p-ISSN: 2279-0845.

Bahari, Norzalizah and Yunus, Ahmad Rozelan and Jabar, Juhaini (2018) Entrepreneurs' personal characteristics, market orientation and SME’s firm performance: Moderating effect of secondary and tertiary education level. Advanced Science Letters, 24 (4). pp. 2789-2792. ISSN 1936-6612

Baharon, Mohd Rizuan and Zainal Abidin, Zaheera and Abdollah, Mohd Faizal and Idris, Ariff and Abu, Nur Azman (2018) Secure video transcoding in mobile cloud computing. International Journal of Computing, 17 (4). pp. 208-218. ISSN 2312-5381

Bairan, Aninorbaniyah (2018) Effect of multiwall carbon nanotube loading on multi filler polymer composite as bipolar plate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bakri, Mohammed Hariri and Abdullah, Abu and Musa, Haslinda and Jayakrishnan, Mailasan and Azmi, Fadhlur Rahim (2018) The adoption of halal food supply chain towards the performance of food manufacturing in Malaysia. Management Science Letters, 8. pp. 755-766. ISSN 1923-9335

Bakri, Mohammed Hariri and Dabas, Nurayati and Ismail, Shafinar and Abdul Hamid, Baharom (2018) Does securitization for government staff personal loan perform? International Journal Of Engineering And Technology (UAE), 7 (3.21). pp. 267-269. ISSN 2227-524X

Bakri, Mohammed Hariri and Rahim Azmi, Fadhlur and Abdullah, Abu and Musa, Haslinda (2018) Perception of small medium and enterprises towards halal food supply chain in Malaysia. International Journal Of Mechanical Engineering And Technology, 9 (11). pp. 821-828. ISSN 0976-6340

Bakri, Mohammed Hariri and Sufian, Fadzlan and Abdul Hamid, Baharom and Ismail, Shafinar (2018) Determinant of securitization spread in Malaysia. International Journal Of Business And Society, 19 (3). pp. 904-917. ISSN 1511-6670

Balai, Lorita Lawi (2018) Comparison of properties of polypropylene fiber glass in injection moulding process using different gate locations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Balrwein, Hussein Tawfiq Saeid (2018) Evaluation of the Skills Gap for Progression towards the Fourth Industrial Revolution in Libya. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bamatraf, Fahmi Jamil Umer (2018) Production capacity losses analysis in manufacturing sector : A case study of UAE ductile iron pipes manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Basari, Amat Amir and Mohamad, Khairul Anuar and Nain, Arif Zulfadli and Haron, Ahmad Razani and Alias, Afishah and Ibrahim, Pungut (2018) Effect of circular coil dimension on resonant coupling wireless power transfer system. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-6). pp. 19-23. ISSN 2180-1843

Boon, Sen (2018) Determine Influencing Factors Toward Entrepreneurship Activities In Malaysia Using Bayesian Model Averaging. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Brown, Andrew D. and Chad, John E. and Kamarudin, Muhammad Raihaan and Dugan, Kier J. and Furber, Stephen B. (2018) SpiNNaker: Event-based simulation - Quantitative behavior. IEEE Transactions On Multi-Scale Computing Systems, 4 (3). pp. 450-462. ISSN 2332-7766

Buja, Alya Geogiana and Abdul Latip, Shekh Faisal and Ahmad, Rabiah (2018) A Security Analysis Of Iot Encryption: Sidechannel Cube Attack On Simeck32/64. International Journal of Computer Networks & Communications (IJCNC), 10 (4). pp. 79-90. ISSN 0975-2293

Buja, Alya Geogiana (2018) Security Analysis Techniques Using Differential Relationships For Block Ciphers. Doctoral thesis, UTeM.

Burhan, Nuradebah (2018) Spectral Estimation And Supervised Classification Technique For Real Time Electromyography Pattern Recognition. Masters thesis, UTeM.

C

Chee, Kiang Lam and Ali, Mohanad Faeq and Lam, C. K. and K.V. Ch’ng and Sundaraj, Kenneth and Tan, Wen Hong (2018) Design And Development Of Path Planning Techniques For A Tennis Ball Retriever Robot. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 59-65. ISSN 2289-8131

Cheng, See Yuan and Abdullah, Mohd Azman and Zakaria, Mohamad Shukri and Mansor, Shuhaimi (2018) Numerical Study Of Aerodynamic Performance Of Hatchback Vehicle Fitted With A Strip Spoiler: Effect Of Yaw Angle. Advanced Research In Fluid Mechanics And Thermal Sciences, 47 (1). pp. 108-118. ISSN 2289-7879

Cheong, Yoke Teng (2018) The Purchase Decision Of Online Consumers Towards On Product Quality Of Lazada Among FPTT, UTeM Students. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Chiew, Tsung Heng (2018) Super Twisting Sliding Mode Controllers And Kalman-Bucy Filter For Single Axis Positioning System. Doctoral thesis, UTeM.

Chong, See Ying (2018) Stab resistant analysis for body armour design features manufactured via fused deposition modeling process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chong, Shin Horng and Azahar, Arman Hadi and Mohamed Kassim, Anuar and Zainal Abidin, Amar Faiz and Harun, Mohamad Haniff and Nor Shah, Mohd Badril and Mohd Annuar, Khalil Azha and Manap, Mustafa and Rizman, Zairi Ismael (2018) Optimizing Central Pattern Generators (CPG) Controller For One Legged Hopping Robot By Using Genetic Algorithm (GA). International Journal Of Engineering & Technology, 7 (3). pp. 160-164. ISSN 2227-524X

Chung, Kar Yee (2018) Productivity Improvement Through Work System Design Method For Better Man Power Utilization At Robot Welding Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

D

Da'im, Nur Aina Khairiah (2018) Understanding MOOC Web Design Factor From The Perspective Of Technical Student. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Dabas, Nurayati (2018) Determinants of asset-backed securitized firm's performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dabas, Nurayati and Bakri, Mohammed Hariri (2018) Securitization performance model in Malaysia. IOSR Journal of Economics and Finance (IOSR-JEF), 9 (6). pp. 67-70. ISSN 2321-5925

Devadas, Saandilian (2018) Remote global alignment error for cycle time improvement of pad inductor layer. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Dhar Malingam, Sivakumar and Mohd Amman, Rosmia and Samekto, Haryanti and Mohd Ab Halim, Mohd Firdaus and Abu Shah, Ismail and Sulaiman, Saiful Naim and Subramonian, Sivarao (2018) Influences of draw forming process on the crash analysis of a circular cup. Journal of Advanced Manufacturing Technology (JAMT), 12 (1(2)). pp. 547-559. ISSN 1985-3157

Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2018) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 1-16. ISSN 1537-6494

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Ali, Mohd Basri and Selamat, Mohd Zulkefli and Bapokutty, Omar and Subramonian, Sivarao (2018) Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 822-827. ISSN 1819-6608

Dolhalit, Mohamad Lutfi and Azman, Farah Nadia and Abdul Salam, Sobihatun Nur and Abdul Mutalib, Ariffin and Yusoff, Muhamad Saiful Bahri (2018) Persuasive multimedia in truancy awareness (PMTA): Integration of persuasive design principles. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 33-37. ISSN 2180-1843

Draman @ Muda, Azah Kamilah and Azmi, Mohd Sanusi and Draman @ Muda, Noor Azilah and Arbain, Nur Atikah and Radzid, Amirul Ramzani (2018) Offline handwritten digit recognition using triangle geometry properties. International Journal of Computer Information Systems and Industrial Management Applications, 10. 087 - 097. ISSN 2150-7988

E

Ebrahim, Zuhriah and Muhamad, Mohd Razali and Abdul Rasib, Amir Hamzah (2018) Inefficient processing time as hidden time loss in assembly operations. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (10). pp. 1-5. ISSN 2180 – 1843

Embong, Nor Hamizah (2018) The Factors Influencing Adoption Towards E-Hailing Services Among Users In Melaka. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Eng, Poh Hwa (2018) Framework For Skills Management Of Skilled Workers In Proton : A Case Study. Doctoral thesis, UTeM.

F

Fam, Soo Fen and Ismail, Noriszura and Jemain, Abdul Aziz and Maukar, Anastasia Lidya and Yanto, Heri and Prastyo, Dedy Dwi and Chuan, Zun Liang (2018) Weighting methods in the construction of area deprivation indices. Journal Of Fundamental And Applied Sciences, 10 (6S). pp. 2655-2668. ISSN 1112-9867

G

Ganasan, Umadewi (2018) Elimination of gold tarnish by post dip after gold plating process in flexible printed circuit board manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ganesan, Hema Nanthini (2018) Optimization of dimple configurations on heat dissipation of aluminium flat surface. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gee, Soon Yow (2018) The Study Of Driver's Acceptance Toward Self Driving Vehicle In Melaka. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Ghazali, Mohd Zaki (2018) Maximum Torque Estimation Technique Of Three Link System For Sit To Stand Motion. Masters thesis, UTeM.

H

Halim, Isa and Radin Umar, Radin Zaid and Padmanathan, Vinothini and Too, Yi Wei (2018) Physical Risk Factors And Observational Tools For Computer Office Workers–An Overview. International Journal Of Mechanical Engineering And Technology (Ijmet), 9. 694–704. ISSN 0976-6359

Halim, Nurul Hamimi (2018) Optimization Method Using Modified Harmony Search For Coverage And Energy Efficiency In Wireless Sensor Network. Masters thesis, UTeM.

Hamdan, Nor Haliza (2018) The Opportunity Identification Influencing Youth Towards Entrepreneurship Intention In Street Food Vendor At Johor. UNSPECIFIED thesis, UTeM.

Hamid, Mohd Saad and Hamzah, Rostam Affendi and Kadmin, Ahmad Fauzan and Abd Gani, Shamsul Fakhar and A Aziz, Khairul Azha and Salam, Saifullah and Tg. Wook, Tg Mohd Faizal (2018) Gradient Magnitude Differences And Guided Filter For Stereo Video Matching Algorithm. JOURNAL OF TELECOMMUNICATION, ELECTRONIC AND COMPUTER ENGINEERING (JTEC), 10. pp. 77-80. ISSN 2180-1843

Hamid, Nur Maizurah (2018) Investigate The Opportunities And Challenges Of Industry 4.0 On Global Manufacturing Solution Sdn Bhd. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Hamim, Muhammad Hiejasz (2018) Generation-Y (Gen-Y) Intention To Use Of Augmented Reality (AR) Technology In Higher Education. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Hamzah, Rostam Affendi and Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Kadmin, Ahmad Fauzan and Salam, Saifullah (2018) Disparity Map Algorithm Based On Edge Preserving Filter For Stereo Video Processing. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-7). pp. 59-62. ISSN 2180-1843

Hamzah, Rostam Affendi and Ibrahim, Haidi (2018) Improvement Of Stereo Matching Algorithm Based On Sum Of Gradient Magnitude Differences And Semi-Global Method With Refinement Step. Electronics Letters, 54. pp. 876-878. ISSN 0013-5194

Harum, Norharyati and Ali, Mohanad Faeq and Abu, Nor Azman (2018) A Novel Multiple Session Payment System. International Journal Of Advanced Computer Science And Applications(Ijacsa),Volume 9 Issue 6,2018., 9. pp. 237-245. ISSN 2158-107X

Harum, Norharyati and Abu, Nor Azman and Ali, Mohanad Faeq (2018) Hybrid LTE-Vanets Based Optimal Radio Access Selection. ARPN Journal Of Engineering And Applied Sciences, 13. pp. 391-397. ISSN 1819-6608

Harun, Nurul Hatiqah and Kasim, Mohd Shahir and Zainal Abidin, Muhammad Zaimi and Raja Abdullah, Raja Izamshah and Attan, Hassan and Ganesan, Hema Nanthini (2018) A Study On Surface Roughness During Fused Deposition Modelling: A Review. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 25-35. ISSN 1985-3157

Harun, Siti Nabila Safina (2018) The Effectiveness Of Organization Behaviour In Enhancing The Employees Performances In Mcdonald's, Malacca. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Hasan, Hayfaa Mohammed Hussein (2018) Dynamic Stability Studies Of Generators In Power System Using Fuzzy Logic Controller Based Power System Stabilizer. Doctoral thesis, UTeM.

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab. Rahman, Mohd Nizam (2018) Factor influencing enterprise resource planning system: A review. Journal of Advanced Manufacturing Technology (JAMT) , 12 (1). pp. 247-258. ISSN 1985-3157

Hasan, Rafidah and Azmi, Muhamad Syafwan and Rosli , Nur Ameelia and Alkahari , Mohd Rizal and Ismail , Rainah (2018) Static And Dynamic Analysis Of FDM Printed Lattice Structures For Sustainable Lightweight Material Application. Progress In Industrial Ecology, 12. pp. 247-259. ISSN 1476-8917

Hashim, Haslenda and Razak, Nurul Hanim and Mohd Idris, Muhammad Nurariffudin (2018) Spatial Optimisation Of Oil Palm Biomass Co-Firing For Emissions Reduction In Coal-Fired Power Plant. Journal Of Cleaner Production, 172. pp. 3428-3447. ISSN 0959-6526 (Submitted)

Hashim, Md Assri (2018) Development of lean construction framework for 'rumah komuniti' project. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hasiron, Mohd Adli (2018) Protecting Of Innovation Challenges And Ways Of Improvement In Smes Melaka. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Aslinda and Talib, Mohammed Saad and Hussin, Burairah and Saad Talib, Zainab and M. Sammour, Mahmoud Ahmed and Sabah Rasoul, Zainab (2018) Data Dissemination Based Clustering Techniques For Vanets : A Review. Journal Of Advanced Research In Dynamical And Control Systems, 10. 596-604. ISSN 1943-023X

Hassan, Elia Erwani and Abdul Rahman, Titik Khawa and Zakaria, Zuhaina and Bahaman, Nazrulazhar and Jifri, Mohammad Hanif (2018) Maximum loadability enhancement with a hybrid optimization method. Bulletin of Electrical Engineering and Informatics, 7 (3). pp. 323-330. ISSN 2089-3191

Hassan, Elia Erwani and Abdul Rahman, ‪Titik Khawa and Zakaria, Zuhaina and Bahaman, Nazrulazhar and Jifri, Mohammad Hanif (2018) Multi objective adaptive tumbling bacterial foraging in VAR solutions for sustainable power system operation. Indonesian Journal of Electrical Engineering and Computer Science, 11 (1). pp. 129-136. ISSN 2502-4752

Hassan, Elia Erwani and Jifri, Mohd Hanif and Abdul Rahman, Titik Khawa and Zakaria, Zuhaina and Bahaman, Nazrulazhar (2018) Load margin expansion for sustainable power system operation. ICT Express, 4 (2). pp. 81-86. ISSN 2405-9595

Hassan, Nor Hafeizah (2018) A Framework For Classification Software Security Using Common Vulnerabilities And Exposures. Doctoral thesis, UTeM.

Hassan, Nor Hafeizah and Bahaman, Nazrulazhar and Hussin, Burairah and Sahib, Shahrin (2018) Enhancing the secured software framework using vulnerability patterns and flow diagrams. International Journal Of Advanced Computer Science And Applications (IJASCA), 9 (9). 352 - 364. ISSN 2158-107X

Hassan, Nornikman and Ahmad, Badrul Hisham and Abd. Aziz, Mohamad Zoinol Abidin and Abu Bakar, Hamizan (2018) Dual Frequencies Band And Enhanced Wideband Effect Of Dual Layer Microstrip Patch Antenna With Parasitic. Journal Of Physics: Conference Series, 1049. pp. 1-7. ISSN 1742-6588

Ho, Koon Song (2018) Tourism Small And Medium Enterprise Competitiveness : The Influence Of Entrepreneurial Attitudes Towards Business Performance. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Hussein Al-Shami, Samer Ali (2018) The Role Of Social Networking Sites On Innovation Capability And Tourism Firms Performance In Malaysia.The Mediate Effect Of Absorptive Capacity. Journal Of Hospitality And Tourism Technology, 23. pp. 1-15. ISSN 1757-9880

Hussein Al-Shami, Samer Ali and Abdul Rashid, Nurulizwa (2018) Business Model For Sustainable Development : An Insight From Malaysian Automotive Industry. International Journal Of Human And Technology Interaction (IJHATI), 2 (1). pp. 77-82. ISSN 2590-3551

Husseini, Saleh Ali and Al-Shami, Samer Ali Hussein and Fam, Soo Fen and Al derei, Saif (2018) Impact Of ISO 9001: 2008 Certification On Consumer Satisfaction. Journal Of Advanced Research In Dynamical And Control Systems (JARDCS), 10 (06). pp. 322-331. ISSN 1943-023X

Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Zainon, Maslan and Ahmad, Emy Zairah and Idris, Norain (2018) Modelling And Simulation Of A Wind Turbine With Doubly Fed Induction Generator In Full Load Operation. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 57-63. ISSN 1819-6608

I

Indra, Win Adiyansyah and Morad, Fatimah and Mohd Yusof, Norfadzlia and Che Aziz, Siti Asma (2018) GSM-Based Smart Energy Meter With Arduino Uno. International Journal Of Applied Engineering Research, 13 (6). pp. 3948-3953. ISSN 0973-4562

Ishak, Anuar (2018) Enhancement of cleaner production assessment to identify workplace waste and hazard by value stream mapping. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)

Ishak, Mazlan (2018) Investigation of the Compression Failure in Woven Carbon Laminate Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Amelia Ritahani and Zainal Abidin, Nadzurah and Emran, Nurul Akmar (2018) Performance analysis of machine learning algorithms for missing value imputation. International Journal Of Advanced Computer Science And Applications(Ijacsa),Volume 9 Issue 6,2018., 9. pp. 442-447. ISSN 2158-107X

Ismail, Huzainirah (2018) The Constant Switching Frequency And Torque Ripple Reduction Of Direct Torque Controlled Induction Machine With Neutral Point Clamped Inverter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Mohammad Hazrin (2018) Conversion Technique From 2D To 3D Model For A Shape-Changing Aircraft Slat Mechanism. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Mohd. Farid and Abdullah, Muhammad Ilman Hakimi Chua and Abu Bakar, Muhammad Fairuz and Ahmad, Azrin and Mokhtar, Mohd Sulhan and Hamzah, Luqman Hakim and Othman, Muhammad Nur and Siam, Effendy Onn (2018) Temperature Control System For Fertigation Application. [Technical Report] (Submitted)

Ismail, Norhisham (2018) Development Of A Vibration Based Electromagnetic Energy Harvester (EEH) Using Graphene Silver Conductive Direct-Write Process For Automotive Thermal-Sensor. Masters thesis, UTeM.

Ismail, Rasyidah (2018) A Study Of Determinants Of Green Purchase Intention Towards Green Product. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Ithnin, Fazidah and Sahib, Shahrin and Chong, Kuan Eng and Sidek, Safiah and Raja Harun, Raja Nor Safinas (2018) Mapping The Futures Of Malaysian Higher Education:A Meta –Analysis Of Futures Studies In The Malaysian Higher Education Scenario. Journal Of Futures Studies, 22. pp. 1-18. ISSN 1027-6084

Ithnin, Hafini Suhana (2018) Readiness Factors For AMT Implementation In Manufacturing SMEs. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ithnin, Hasliza Shima (2018) Entrepreneurship Awareness : Utem Students' Pespective. UNSPECIFIED thesis, Universiti Teknikal Malaysia Melaka.

Izharrudin, Siti Zakiah (2018) Implikasi Penggunaan Media Sosial Terhadap Produktiviti Sumber Manusia Di Institut Pengajian Tinggi Awam Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

J

Jaafar, Hazriq Izzuan and Ramli, Liyana and Mohamed, Zaharuddin (2018) A Neural Network-Based Input Shaping For Swing Suppression Of An Overhead Crane Under Payload Hoisting And Mass Variations. Mechanical Systems And Signal Processing, 107. pp. 484-501. ISSN 0888-3270

Jamaluddin, Khairuddin (2018) Failure Investigation and Product Quality Optimization for Movable Fairing Aero Composite Part. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamaludin, Mohd Zaini (2018) Performance and emissions study of a single cylinder ci engine using castor oil biodiesel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamaludin, Zamberi and Chiew, Tsung Heng and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman (2018) Optimization of super twisting sliding mode control gains using Taguchi method. Industrial Engineering & Management Systems, 17. pp. 62-71. ISSN 2234-6473

Jamaludin, Zamberi and Mat Seman, Norhidayah and Minhat, Mohamad and Che Ku Junoh, Sahida (2018) Design Of A CAD/CAM-Simulink Data Exchange System For Machine Tool Application. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 1-13. ISSN 1985-3157

Jamaludin, Zamberi and Huong , Chung Yu and Abdullah, Lokman and Nordin, Mohd Hisham and Abdullah, M. F. and Haron, R. and Jalal, K. B.A. (2018) Automated Tracking System Using RFID For Sustainable Management Of Material Handling In An Automobile Parts Manufacturer. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 35-40. ISSN 2180-1843

Jamil Alsayaydeh, Jamil Abedalrahim and Shkarupylo, Vadym and Hamid, Mohd Saad and Skrupsky, Stepan and Oliinyk, Andrii (2018) Stratified Model Of The Internet Of Things Infrastructure. Journal Of Engineering And Applied Sciences, 13 (20). pp. 8634-8638. ISSN 1816-949X

Jasmee, Solehah and Omar, Ghazali and Masripan, Nor Azmmi and Kamarolzaman, Anita Akmar and A S Ashikin and Che Ani, Fakhrozi (2018) Hydrophobicity Performance Of Polyethylene Terephthalate (PET) And Thermoplastic Polyurethane (TPU) With Thermal Effect. Materials Research Express, 5 (9). pp. 1-12. ISSN 2053-1591

Jayakrishnan, Mailasan (2018) Analysis Of Socio-Technical Factors In Business Intelligence Framework Case Study Of Higher Learning Institution. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jayakrishnan, Mailasan and Mohamad, Abdul Karim and Mohd Yusof, Mokhtar (2018) Assimilation Of Business Intelligence (BI) And Big Data Analytics (BDA) Towards Establishing Organizational Strategic Performance Management Diagnostics Framework: A Case Study. Journal Of Digital Information Management, 16 (1). pp. 22-32. ISSN 0972-7272

Jayakrishnan, Mailasan and Mohamad, Abdul Karim and Mohd Yusof, Mokhtar (2018) Integrating The Features Of Knowledge Management (KM) And Business Intelligence (BI) For Developing Organizational Performance Framework-A Diagnostics Dashboard. Advanced Science Letters, 24 (3). pp. 1795-1799. ISSN 1936-6612

Jidin, Aiman Zakwan and Mahzan, Irna Nadira and Hassim, Nurulhalim and Kadmin, Ahmad Fauzan (2018) Low-Cost And Portable Interactive Sinusoidal Digital Signal Generator By Using FPGA. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-2). pp. 19-24. ISSN 2180-1843

Jifri, Mohammad Hanif (2018) A Study Of Marco Factors On Electricity Load Demand In Johor Bahru Using Statistical Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jimit, Roy Hanson and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Dhar Malingam, Sivakumar (2018) Tensile and fatigue behaviour of glass fibre reinforced polyester composites. International Journal Of Engineering And Technology, 7 (3.17). pp. 25-27. ISSN 2227-524X

Jong, Siat Ling and Riva, Carlo G. and D'Amico, Michele and Lam, Hong Yin and Mohamed Yunus, Mawarni and Din, Jafri (2018) Performance of synthetic storm technique in estimating fade dynamics in equatorial Malaysia. International Journal of Satellite Communications and Networking, 36 (5). pp. 416-426. ISSN 1542-0973

K

Kamaruddin, Nur Izaitun (2018) Investigating Constraints In Food Manufacturing For SMEs Performance : A Case Of Kuala Lumpur. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamaruddin., Rabiatul Adawiyah Azian (2018) Return Loss Enhancement Of Radial Line Slot Array Antenna Using Closed Ring Resonator Structure At 28 Ghz. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamarudin, Muhammad Nizam and Ab Ghani, Mohd Ruddin and Mohd Shah, Hairol Nizam and Kamis, Zalina (2018) Power System Stability Enhancement Using Different Facts Devices: A Review. Journal Of Fundamental And Applied Sciences, 10 (6S). pp. 2431-2453. ISSN 1112-9867

Kamarudin, Muhammad Nizam and Md. Rozali, Sahazati and Hairi, Mohd Hendra and Hanaffi, Farhan and Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi (2018) Realization Of Real-Time Hardware-In-The-Loop For A Liquid Level With Open-Loop Ziegler Nichols Technique. International Journal Of Electrical Engineering And Applied Sciences (IJEEAS), 1 (2). pp. 47-51. ISSN 2600-7495

Kamarudin, Muhammad Nizam and Mohd Shaharudin, Nabilah and Hairi, Mohd Hendra and Rizman, Zairi Ismael (2018) Achieving Power System Stability For Two Area Hydro Power System Via LQR Techniques. International Journal Of Engineering & Technology, 7. pp. 396-402. ISSN 2227-524X

Kamarudin, Muhammad Nizam and Rizman, Z. I and Ishak, M. T and hashim, F. R and Yassin, Ihsan M. and Zabidi, A and Zaman, F. K and H, K. Yeap (2018) Sposol: 5 In 1 Smart Portable Solar Light. Journal Of Fundamental And Applied Sciences, 10 (2S). pp. 347-364. ISSN 1112-9867

Kamarudin, Muhammad Nizam and Rizman, Z.I. and Ishak, M.T. and Hashim, F.R. and Yassin, Ihsan M. and Zabidi, A. and Zaman, F.K. and K., H. Yeap (2018) Design A Simple Solar Tracker For Hybrid Power Supply. Journal Of Fundamental And Applied Sciences, 10 (2S). pp. 333-346. ISSN 1112-9867

Kamat, Seri Rahayu and Ani, Mohammad Firdaus and M, Mohamad and Hambali, Ruzy Haryati and Husain, Kalthom (2018) A Study Of Psychophysical Factor (Heart Rate) For Driver Fatigue Using Regression Model. Malaysian Journal Of Public Health Medicine (MJPHM), 2. pp. 1-9. ISSN 1675-0306

Kamisman, Norazelina (2018) Harmonic Elimination Pulse Width Modulation Using Differential Evolution Technique For Three Phase Voltage Source Inverter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Karis, Mohd Safirin and Mohd Ali, Nursabillilah and Azahar, Muhammad Izzuddin and Shaari, Shafrizal Nazreen and Selamat, Nur Asmiza and Mohd Saad, Wira Hidayat and Zainal Abidin, Amar Faiz and Kadiran, Kamaru Adzha and Rizman, Zairi Ismael (2018) Warning Sign Analysis Of Traffic Sign Data-Set Using Super Vised Spiking Neuron Technique. International Journal Of Engineering & Technology, 7 (3.14). pp. 227-232. ISSN 2227-524X

Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Chao, Wang and Terken, Jacques and Delbressine, Frank and Rauterberg, Matthias (2018) The Effect Of Peripheral Visual Feedforward System In Enhancing Situation Awareness And Mitigating Motion Sickness In Fully Automated Driving. Transportation Research Part F: Traffic Psychology And Behaviour, 58. pp. 678-692. ISSN 1369-8478

Kasim, Mohd Shahir and Che Haron, Che Hassan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Akmal, Suriati and Md Ali, Mohd Amran and Abu Bakar, Mohd Hadzley and Salleh, Mohd Shukor (2018) Investigation Of Tangential Force On Ball Nose Rake Face During High-Speed Milling Of Inconel 718. Advances In Materials And Processing Technologies, 4 (3). pp. 1-7. ISSN 2374-0698

Khalaf, Mohammed Oudah (2018) A Computational Fluid Dynamics (CFD) study of an airflow in a single storey building integrated with a combined system of wind catcher and solar chimney. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khamis, Alias and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Mohd Aras, Mohd Shahrieel and Zabide, Muhamad Aswad and Sutikno, Tole (2018) Control Strategy For Distributed Integration Of Photovoltaic And Battery Energy Storage System In Micro-Grids. TELKOMNIKA (Telecommunication, Computing, Electronics And Control), 16 (5). pp. 2415-2427. ISSN 1693-6930

Khoo, Nee Kah and Hussin, Hanipah and Abdullah, Norida (2018) Managing Occupational Safety And Health (OSH) Culture Practices At Small And Medium (S&M) Malaysia Manufacturing Sector. Journal Of Human Capital Development (JHCD), 11 (1). pp. 79-90. ISSN 1985-7012

Kudus, Norliah and Sidek, Safiah and Abu Hassan, Mahadi and Mohamed, Shahrulanuar and Aripin, Muhamad Afzamiman (2018) The Instruments Used In Measuring Internet Addiction: A Review. International Journal Of Pure And Applied Mathematics, 119 (18). pp. 605-616. ISSN 1314-3395

L

L. Karuppiah Pillay, Tharuma Rajan Pillai (2018) Examining The Role Of Social-Cultural Capital In Youth Entrepreneurship : A Comparative Study Between Malaysia And Laos. Doctoral thesis, UTeM.

Lau, Keng Liang (2018) Crowdfunding And Intellectual Property Rights : A Case Study Of Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lau, Kok Tee and Kok, Swee Leong and Lau, Kok Tee (2018) Design, Fabrication And Characterization Of Piezoelectric P(Vdf-Trfe) Thick Film On Flexible Substrate For Energy Harvesting. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1). pp. 63-68. ISSN 2180-1843

Lew, Rose Ai Fen and Chew, Boon Cheong and Abdul Hamid, Mohd Syaiful Rizal (2018) Green Logistics Implementation In Malaysian Logistics Industry. Advanced Science Letters, 24 (6). pp. 4214-4217. ISSN 1936-6612

Liew, Pay Jun and Mohd Hajazi, Aini Syahida and Shaaroni, Ainusyafiqah and Sulaiman, Mohd Amri and Raja Abdullah, Raja Izamshah (2018) Investigation Of Effects Of Carbon Nanofiber Nanofluid In Drilling Of AISI 304 Stainless Steel. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 491-500. ISSN 1985-3157

Liew, Pay Jun and Zainal, Nurlishafiqa and Ahsan, Qumrul and Zhou, T. and Yan, J. (2018) Experimental Investigation Of RB-SiC Using Cu–CNF Composite Electrodes In Electrical Discharge Machining. The International Journal Of Advanced Manufacturing Technology, 98 (9-12). pp. 3019-3028. ISSN 0268-3768

Liew, Siaw Hong and Choo, Yun Huoy and Yin, Fen Low and Mohd Yusoh, Zeratul Izzah (2018) EEG-Based Biometric Authentication Modelling Using Incremental Fuzzy-Rough Nearest Neighbour Technique. IET Biometrics, 7 (2). pp. 145-152. ISSN 2047-4938

Lim, Brenda Xun Li (2018) Analysing The Influence Of Firm Size On Financial Performance In Malaysian ICT Sector. Masters thesis, Universiti Teknikal Malaysia Melaka.

Loo, Heoy Shin (2018) A comprehensive planning of private land transport for sustainable development and community welfare at Ayer Keroh, Melaka. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lum, Yip Hing (2018) Slow Release Behavior Of Biodegradable Starch Polyvinyl Alcohol Urea Fertilizer. Doctoral thesis, UTeM.

M

MUHAMMAD SHARIL BIN YAHAYA, MUHAMMAD SHARIL BIN YAHAYA and Azis, Norhafiz and Selva, Amran Mohd and Kadir, Mohd Zainal Abidin Ab and Jasni, Jasronita and Kadim, Emran Jawad and Hairi, Mohd Hendra and Ghazali, Young Zaidey Yang (2018) A MAINTENANCE COST STUDY OF TRANSFORMERS BASED ON MARKOV MODEL UTILIZING FREQUENCY OF TRANSITION APPROACH. ENERGIES, 11. pp. 1-14. ISSN 1996-1073

Mahat, Muhammad Othman (2018) Hubungan antara etika kerja Islam dengan komitmen organisasi serta kesannya terhadap profesion jurutera Muslim. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mansoor, Hamdan O. and Weston, Richard H. and Abdullah, Rohana and King, Steven and Jackson, Peter and Foley, Paul (2018) A Systemic Approach To Applying Asset Orchestration Theory. International Journal Of Agile Systems And Management (IJASM), 11 (4). pp. 315-339. ISSN 1741-9174

Mansor, Nur Farraliza (2018) Enhancing Harmony Search Parameters Based On Step And Linear Function For Bus Driver Scheduling And Rostering Problems. Doctoral thesis, UTeM.

Mas'ud, Mohd Zaki (2018) An Efficient Sieve Technique In Mobile Malware Detection. Doctoral thesis, UTeM.

Masron, Farhana (2018) High electrical conductivity bipolar plate using stannum/graphite polymer composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Masrukin, Yully Erwanti (2018) Design of switchable dual-band bandpass filter for wireless communication. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Amin, Mohd Imran (2018) Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Isa, Siti Zulaika (2018) Design And Development Of Linear DC Motor With Constant Thrust For Household Food Processing Application. Masters thesis, UTeM.

Mat Seman, Norhidayah and Jamaludin, Zamberi and Minhat, Mohamad (2018) System Interface Design For CAD/CAM-Simulink Data Exchange System Using MATLAB. Intelligent Manufacturing & Mechatronics, LNME. pp. 639-647. ISSN 2195-4356

Mat Yaacob, Mohd Noor Alhadi (2018) Electroless Nickel Deposition On Surface Activated Kenaf Fiber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mazda, Nur Syahirah (2018) Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mazlan, Siti Nur Humaira (2018) Improvement on mechanical properties and study of manufacturability of printed part fabricated via open source 3D printer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Ali, Mohd Amran and Abdullah, Abu and Mohamad, Effendi and Salleh, Mohd Shukor and Hussein, Nur Izan Syahriah and Muhammad, Z. and Dahaman, Shamshulizam (2018) Tensile properties of ternary blends for HDPE/PP/Recycle HDPE in blow moulding process. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 31-41. ISSN 1985-3157

Md Fauadi, Muhammad Hafidz Fazli and Akmal, Suriati and Mat Ali, Mahasan and Anuar, Nurul Izah and Ramlan, Samad and Mohamed Noor, Ahamad Zaki and Awang, Nurfadzylah (2018) Intelligent Vision-Based Navigation System For Mobile Robot: A Technological Review. Periodicals Of Engineering And Natural Sciences (PEN), 6 (2). pp. 47-57. ISSN 2303-4521

Md Fauzi, Noor Azamiah (2018) Design And Analysis Of Microwave Transmission Glass By Using Complementary FSS. Masters thesis, UTeM.

Md Ghazaly, Mariam and Siau, Ping Tee and Che Amran, Aliza and Jamaludin, Irma Wani (2018) Experimental Investigation Of A Passive Quarter Car Suspension System. ARPN Journal Of Engineering And Applied Sciences, 13 (4). pp. 1181-1187. ISSN 1819-6608

Md Ghazaly, Mariam and Yeo, Chin Kiat and Chong , Shin Horng and Jamaludin, Irma Wani and Ranom, Rahifa (2018) Influence Of Materials,Air Gap And Winding Turns For A Tubular Linear Switched Reluctance Actuator (TLSRA). Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-2). pp. 63-66. ISSN 2289-8131

Md Ghazaly, Mariam and Yusri, Izzati and Ranom, Rahifa and Rahmat, Mohd Fuaad and Jamaludin, Irma Wani (2018) Comparison Of Torque Performances On Different Core Material For Switched Reluctance Actuator Without Permanent Magnet. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-2). pp. 53-56. ISSN 2289-8131

Md Jasman, Md Eirfan Safwan (2018) Experimental Investigation On Tribological Properties Of Natural Oil-Based Lubricants As Sustainable Bio-Lubricants. Masters thesis, UTeM.

Md Khushairi, Norazah and Emran, Nurul Akmar and Menon, Anil Kumar (2018) Database tuning using oracle materialized view for manufacturing industry. International Journal Of Computer Information Systems And Industrial Management Applications., 10. pp. 38-46. ISSN 2150-7988

Md Khushairi, Norazah and Emran, Nurul Akmar and Mohd Yusof, Mokhtar (2018) Query rewriting using multitier materialized views for Cyber manufacturing reporting. Journal of Advanced Manufacturing Technology (JAMT) , 12. pp. 393-407. ISSN 1985-3157

Md Saad, Mohd Shamsuri and Yunus, Ahmad Rozelan and Kamarudin, Mohd Fauzi and Ibrahim, Ismail (2018) An integrated personality profiling framework to identify and produce talent in a technical university. World Transactions on Engineering and Technology Education , 16 (1). pp. 80-83. ISSN 50 135 362 319

Md Saad, Mohd Shamsuri and Yunus, Ahmad Rozelan and Syed Hassan, Syed Najmuddin and Kamarudin, Mohd Fauzi and Abd Majid, I. (2018) Integrated Personality Profiling Framework Using Traits And Factors Theory For Malaysian HLI Enrolment : A New Approach. International Journal Of Human And Technology Interaction (Ijhati), 1. pp. 57-60. ISSN 2590-3551

Md Shah, Wahidah and Othman, Mohd Fairuz Iskandar and Hussian Hassan, Ali Abdul and Talib, Mohammed Saad and Mohammed, Ali Abdul Jabbar (2018) K Nearest Neighbor Joins And Mapreduce Process Enforcement For The Cluster Of Data Sets In Bigdata. Journal Of Adv Research In Dynamical & Control Systems, 10. pp. 690-696. ISSN 1943-023X

Md Yusof, Hasrul Izatie (2018) Design Of Safety Features For Heavy Vehicles In Malaysia. Masters thesis, UTeM.

Md Yusuf, Muhammad Yusri (2018) Investigation on the effect of multi filler loading in graphite-polypropylene composite as bipolar plate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Zuki, Nor Aishah (2018) Modeling And Analysis Of Constants For Various Double Stator Permanent Magnet Brushless DC Motor. Masters thesis, UTeM.

Md. Rozali, Sahazati and Tan, Yi Lin and Che Amran, Aliza and Kamarudin, Muhammad Nizam (2018) Development Of A Wearable Ankle Rehabilitation Device For Patient With Calf Muscles Flexibility Problems. Journal Of Fundamental And Applied Sciences, 10 (2S). pp. 365-376. ISSN 1112-9867

Meor Said, Maizatul Alice (2018) Design Of Rectenna With Improved RF-To-DC Power Conversion Efficiency For RF Energy Harvesting. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Misha, Suhaimi and Ahmed Al-Qadhi, Ahmed Abdullah and Mohd Rosli, Mohd Afzanizam and Yusof, Ahmad Anas (2018) Experimental Investigation On Indirect, Natural And Forced Convection Mixed Mode Solar Dryer. International Journal Of Mechanical And Mechatronics Engineering, 18. pp. 87-96. ISSN 2227-2771

Miswan, Siti Aishah and Azmi, Mohd Sanusi and Arbain, Nur Atikah and Tahir, Azrina and Radzid, Amirul Ramzani (2018) Rearrangement Of Coordinate Selection For Triangle Features Improvement In Digit Recognition. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-7). pp. 115-119. ISSN 2180-1843

Mohamad, Abdul Karim and Jayakrishnan, Mailasan and Azmi, Fadhlur Rahim and Abdullah, Abu (2018) Implementation Of Business Intelligence Framework For Malaysian Halal Food Manufacturing Industry Towards Initiate Strategic Financial Performance Management. Management Science Letters, 8 (10). pp. 1059-1076. ISSN 1923-9335

Mohamad, Abdul Karim and Jayakrishnan, Mailasan and Azmi, Fadhlur Rahim and Abdullah, Abu (2018) Adoption Of Business Intelligence Insights Towards Inaugurate Business Performance Of Malaysian Halal Food Manufacturing. Management Science Letters, 8 (7). pp. 725-736. ISSN 1923-9335

Mohamad, Abdul Karim and Jayakrishnan, Mailasan and Mohd Yusof, Mokhtar (2018) Understanding Holistic View And Complexities In Big Data Analytics And Business Intelligence (BI) Towards Establishing Strategic Performance Management:A Case Study. Advanced Science Letters, 24 (3). pp. 1775-1779. ISSN 1936-6612

Mohamad, Mohd Amin and Chin, Othman (2018) Business networking and sustainability of small rural business: Mediating effects of entrepreneurial orientation. Management Science Letters, 9. pp. 1-12. ISSN 1923-9343

Mohamad, Mohd Amin and Chin, Othman (2018) The effects of internet usage on business sustainability of small technology-based rural business in Malaysia. International Journal Of Engineering & Technology, 7 (4.35). pp. 635-638. ISSN 2227-524X

Mohamad, Mohd Safwan (2018) Dielectric Strength And Viscosity Of Palm Oil Based Nanofluids For Liquid Insulation In Power Transformer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Jafar, Fairul Azni and Mohamed Noor, Ahamad Zaki and Nordin, Mohd Hisham (2018) Simulation-Based Multi-Objective Optimization For Distributed Material Transportation System. International Journal Of Engineering & Technology, 7 (3.20). pp. 92-94. ISSN 2227-524X

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Zainudin, Siti Fairus and Mohamed Noor, Ahamad Zaki and Jafar, Fairul Azni and Mat Ali, Mahasan (2018) Optimization Of Material Transportation Assignment For Automated Guided Vehicle (AGV) System. International Journal Of Engineering & Technology, 7 (3.20). pp. 334-338. ISSN 2227-524X

Mohamad, Noraiham and Karim, Khairu Ilwani and Abd Razak, Jeefferie and Ab Maulod, Hairul Effendy and Mazlan, Mazliah and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah (2018) Swelling Effects Of NR/EPDM Filled Graphene Nanoplatelets (GNPs) In Different Type Of Service Oils For Engine Mounting. In: Proceedings of Mechanical Engineering Research Day 2018. Centre for Advanced Research on Energy (UTeM), Centre for Advanced Research on Energy, 2018, pp. 243-245. ISBN 9672145209, 9789672145202

Mohamad, Noraiham and Abd Latiff, Anisah and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Shueb, Mohammed Iqbal and Munawar, Rose Farahiyan and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mazlan, Mazliah and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi Azam (2018) Wear Characteristics Of Recycled Carbon Fibre-Filled Polypropylene Composites Via Acidic Surface Treatment. World Review Of Science,Technology And Sust. Development, 14 (2/3). pp. 165-179. ISSN 1741-2234

Mohamad, Noraiham and Mazlan, Mazliah and Ab Maulod, Hairul Effendy and Abdul Razak, Jeefferie and Hamdan, Mohd Mef’at (2018) Rebound Resilience Of Natural Rubber Composites Via Response Surface Methodology. Proceedings Of Mechanical Engineering Research Day 2018, 1. pp. 130-131. ISSN 978-967-2145-20-2

Mohamad Isa, Kamarul Syaffiq (2018) Reduction Of Energy Consumption In Articulated Robot. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Murad, Nor Syaza Farhana (2018) Variable Speed Control Of Two-Mass Wind Turbine System Via State Feedback With Adaptation Law. Masters thesis, UTeM.

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan and Abdul Kadir, Aida Fazliana and Omar, Rosli (2018) Voltage Instability Analysis Based On Adaptive Neuro-Fuzzy Inference System And Probabilistic Neural Network. Journal of Engineering and Technology, 9 (2). pp. 1-13. ISSN 2180-3811

Mohamad Rafaai, Zubaidi Faiesal and Majid, Nur Nadzira and Abdul Rasib, Amir Hamzah (2018) A Review Of PDSA Method To Improve Productivity In Education Sector. International Journal Of Scientific Research Engineering & Technology (IJSRET), 7 (9). pp. 688-690. ISSN 2278-0882

Mohamad Ridzuan, Mohamad Radzi (2018) An Environmentally Energy Dispatch Using New Meta Heuristic Evolutionary Programming. Masters thesis, UTeM.

Mohamad Roslan, Mohammad Muadz (2018) Analysis Of School Bag Weight Carriage Among Primary Students. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Sharif, Sabri and Ahamat, Amiruddin and Abdullah, Mariam Miri and Jabar, Juhaini and Bakri, Mohammed Hariri (2018) University intellectual property commercialization: A critical review of literature. The Turkish Online Journal Of Design, Art And Communication - Tojdac, 8. pp. 874-886. ISSN 2146-5193

Mohamad Sharif, Sabri and Nizam, Nurul Zarirah and Abdul Rashid, Nurulizwa and Masrom, Nor Ratna and Bakri, Mohammed Hariri (2018) Role of values and competencies in university intellectual property commercialization: A critical review. The Turkish Online Journal Of Design, Art And Communication - TOJDAC, 8. pp. 887-904. ISSN 2146-5193

Mohamad Yatim, Norazlina and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah and Yusof, Faridah and Abd Razak, Jeefferie (2018) Effect of functionalised and non-functionalised carbon nanotubes-urea fertilizer on the growth of paddy. Tropical Life Sciences Research, 29 (1). pp. 17-35. ISSN 1985-3718 (Submitted)

Mohamad Yatim, Norazlina and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Yusof, Faridah and Abd Razak, Jeefferie (2018) Effect of functionalised and non-functionalised carbon nanotubes-urea fertilizer on the growth of paddy. Tropical Life Sciences Research, 29 (1). pp. 17-35. ISSN 1985-3718

Mohamad Yuden, Mohamad Adzeem (2018) Optimal design and positioning control performance of a 2-DOF robotic finger. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2018) The Feasibility Of Music And Talk Radio Program As A Focus Stimulant For Driver. International Journal Of Human And Technology Interaction (IJHaTI), 2 (1). pp. 45-49. ISSN 2950-3551

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah and Mustaffa, Izadora and Brahin, Noor Mohd Ariff (2018) N170 wave amplitude analysis on driving performance on highway road. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-6). pp. 145-148. ISSN 2180-1843

Mohamed Noor, Ahamad Zaki and Md Fauadi, Muhammad Hafidz Fazli and Zulkifli, Nur Zul Hafiq and Abdul Basit, Muhamad Naqib and Jafar, Fairul Azni and Mohamad, Nor Rashidah (2018) Computation Of Fuzzy Analytic Hierarchy Process (FAHP) Using Matlab Programming In Sustainable Supply Chain. International Journal Of Engineering & Technology, 7 (3.20). pp. 82-86. ISSN 2227-524X

Mohamed Noor, Ahamad Zaki (2018) Prioritizing Life Cycle Cost In Design For Remanufacturing Using Intelligent Tool. Doctoral thesis, UTeM.

Mohamed Sultan, Al Amin (2018) Managing Supply Chain Complexity: Foresight For Wind Turbine Composite Waste. Procedia CIRP, 69. pp. 938-943. ISSN 2212-8271

Mohamed Yunus, Mawarni and Din, Jafri and Jong, Siat Ling and Lam, Hong Yin (2018) Slant Path Ka-Band rain attenuation statistics in equatorial Malaysia obtained using stratiform convective-synthetic storm technique. International Journal Of Engineering & Technology, 7 (2). pp. 22-25. ISSN 0975-4024

Mohammad, Muhammad Azrain and Mansor, Muhd Ridzuan and Sheikh Md Fadzullah, Siti Hajar and Omar, Ghazali and Dhar Malingam, Sivakumar and Nordin, Mohd Nur Azmi and Lim, L. M. (2018) Analysis of mechanisms responsible for the formation of dark spots in organic light emitting diodes (OLEDs): a review. Synthetic Metals, 235. pp. 160-175. ISSN 0379-6779

Mohammad Jarrah, Mu'ath Ibrahim (2018) Hybrid Artificial Bees Colony Algorithms For Optimizing Carbon Nanotubes Characteristics. Doctoral thesis, UTeM.

Mohammed, Karam Khairullah (2018) Performance comparision of self-tuning PID controller for controlling the speed of a DC motor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Marwan Qaid Abdulrazzaq (2018) High accuracy walking motion trajectory generation profile based on 6-5-6-PSPB polynomial segment with polynomial blend. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Mazin Abed and Mohd Aboobaider, Burhanuddin and Mohd Khanapi, Abd Ghani and Arunkumar, N. and Hamed, Raed Ibraheem and Mostafa, Salama A. and Abdullah, Mohamad Khir (2018) Decision Support System For Nasopharyngeal Carcinoma Discrimination From Endoscopic Images Using Artificial Neural Network. Journal of Supercomputing, 76 (2). pp. 1086-1104. ISSN 0920-8542

Mohammed AbdulGhaffar, Firas Ahmed (2018) Simulation Of Bobbin Friction Stir Welding Using Deform-3D. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Aboobaider, Burhanuddin and Hameed, Asaad Shakir and Ngo, Hea Choon and Mutar, Modhi Lafta and Bilal, Wassim Habib (2018) Review on the methods to solve combinatorial optimization problems particularly: Quadratic assignment model. International Journal Of Engineering & Technology, 7 (SI20). pp. 15-20. ISSN 2319-8613

Mohd Aboobaider, Burhanuddin and Mohammed Al-Khazraji, Ali Abdul-Jabbar and Ismail, Ronizam and Hameed, Mustafa Emad and Basiron, Halizah and Kareem, Ali Noori (2018) A review on security challenges and features in wireless sensor networks: IoT perspective. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 17-21. ISSN 2180-1843

Mohd Aboobaider, Burhanuddin and Hussein, Ihsan Jasim (2018) Internet Of Things Integration With Cloud Computing. Journal Of Advance Research In Dynamical & Control Systems, 10. pp. 616-625. ISSN 1943-023X

Mohd Ali, Noorfa Idayu (2018) Multi-respone injection moulding process parameters optimization using Taguchi method with grey relational analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ali, Nursabillilah and Chan, Albert Bao Der and Ko, Christina Yun Fan and Law, Kok Wah and Loh, Mun Loong and Sulaiman, Marizan and Hasan, Zulhasnizam and Hussin, Mohamed Saiful Firdaus and Razali, Sazalinsyah (2018) Wearable Kinesthetic System In Post-Stroke Rehabilitation: A Review Of Sensor In Body Motions Detection. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-9). pp. 115-120. ISSN 2180-1843

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Ali, Mohd Azamuddin and Samsudin, Muhamad Raimi Sadiq and Selamat, Nurasmiza and Mohd Saad, Wira Hidayat and Zainal Abidin, Amar Faiz and Rizman, Zairi Ismael (2018) Guide Sign Analysis Of Traffic Sign Data-Set Using Supervised Spiking Neuron Technique. International Journal Of Engineering & Technology, 7 (3.14). pp. 221-226. ISSN 227-524X

Mohd Amin, Mohd Norafif (2018) Peningkatan Teknik Kemahiran Permainan Sukan Petanque Dalam Kalangan Pelajar Atlet Di IPTA. Masters thesis, UTeM.

Mohd Amman, Rosmia (2018) Preceding deformation effects on the crush response of the circular cup. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Ab Hadi, Nik Azran (2018) An Analysis Of The Beneficial Of Energy Saving Device. ARPN Journal Of Engineering And Applied Sciences, 13 (8). pp. 2912-2915. ISSN 1819-6608

Mohd Annuar, Khalil Azha and Ab Hadi, Nik Azran and Mohamad Sapiee, Mohd Razali and Harun, Mohamad Haniff and Saadon, Intan Mastura (2018) Implementation Of PS2 Remote Control And Monitoring System For Android Operating System Based Robot Platform. Journal Of Engineering And Applied Sciences, 13. pp. 1851-1858. ISSN 1816-949X

Mohd Annuar, Khalil Azha and Fahmi, Muhammad and Quah, Jit Shen (2018) Efficient Object Isolation In Complex Environment Using Manipulation Primitive On A Vision Based Mobile 6DOF Robotic Arm. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18. pp. 50-56. ISSN 2227-2771

Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Nor Azmi, Muhammad Wahyuddin and Mohd Aras, Mohd Shahrieel and Azlan, Umar Al-Amani and Azahar, Arman Hadi and Mohd Ab Halim, Mohd Firdaus and Yaakub, Muhamad Faizal and Zainal Abidin, Amar Faiz (2018) A Study On The Potential Of Peltier In Generating Electricity Using Heat Loss At Engine And Exhaust Vehicle. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 49 (1). pp. 77-84. ISSN 2289-7879

Mohd Aras, Mohd Shahrieel and Aripin, Muhamad Khairi and Harun, Mohamad Haniff and Husni @ Rusli, Ahmad Faiez and Sulaiman, Marizan and Nor Azmi, Muhammad Wahyuddin and Rizman, Z. I. (2018) An Improved Of Dual Single Input Fuzzy Logic Controller For Underwater Remotely Operated Vehicle (ROV) – Depth Control. Journal Of Fundamental And Applied Sciences, 10 (3S). pp. 951-966. ISSN 1112-9867

Mohd Aras, Mohd Shahrieel and Hanaffi, Farhan and Kamarudin, Muhammad Nizam and Md. Rozali, Sahazati and Mohd Zambri, Mohd Khairi and Hairi, Mohd Hendra (2018) Realization Of Real-Time Hardware-In-The-Loop For A Liquid Level With Open-Loop Ziegler Nichols Technique. International Journal Of Electrical Engineering And Applied Sciences, 1. pp. 47-51. ISSN 2600 - 7495

Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Nor Azmi, Muhammad Wahyuddin and Harun, Mohamad Haniff and Bahar, Mohd Bazli and Mohd Shah, Hairol Nizam and Husni, Ahmad Faiez (2018) Comparison of controllers design performance for underwater remotely operated vehicle (ROV) depth control. International Journal Of Engineering & Technology, 7. pp. 419-423. ISSN 2227-524X

Mohd Azman, Su Noorazma (2018) Filter And Observer Design For Polynomial Discrete-Time Systems: A Sum Of Squares Based Approach. Masters thesis, UTeM.

Mohd Dollah, Rudy Fadhlee and Abd Majid, Mohd Faizal and Arif, Fahmi and Mas'ud, Mohd Zaki and Lee, Kher Xin (2018) Machine Learning For HTTP Botnet Detection Using Classifier Algorithms. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 27-30. ISSN 2180-1843

Mohd Nor, Rozilawati and Md Rozali, Sahazati and Chong, Shin Horng (2018) Positioning Control And Operational Evaluation Of A One Mass Rotary System Using NCTF Controller. International Journal Of Engineering & Technology, 7. pp. 111-115. ISSN 2227-524X

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Sopian, Kamauzzaman and Salleh, Elias and Sharif, Mohd Khairul Anuar (2018) Experimental Development To Determine Time Constant For Polymer Collector. ARPN Journal of Engineering and Applied Sciences, 14. pp. 1523-1527. ISSN 1819-6608

Mohd Rosli, Mohd Afzanizam and Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Norreffendy and Sachit, F. A. (2018) Photovoltaic Thermal /Solar (PVT) Collector (PVT) System Based On Fluid Absorber Design : A Review. Advanced Research In Fluid Mechanics And Thermal Sciences, 48. pp. 196-208. ISSN 2289-7879

Mohd Sabri, Nor Amalina and Emran, Nurul Akmar and Md Khushairi, Norazah (2018) Review of materialized views selection algorithm for cyber manufacturing. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 15-19. ISSN 2289-8131

Mohd Salleh, Nurhashikin (2018) A New Profiling Framework In Identifying Cyber Violent Extremism Attack. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shah, Hairol Nizam (2018) Local threshold identification and gray level classification of butt joint welding imperfections using robot vision system. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Aras, Mohd Shahrieel and Mohd Ali, Nursabillilah and Wasbari, Faizil and Abu Bakar, Mohd Nor Fakurazy (2018) Design And Develop An Autonomous UAV Airship For Indoor Surveillance And Monitoring Applications. International Journal On Informatics Visualization, 2 (1). pp. 1-7. ISSN 2549-9610

Mohd Shah, Hairol Nizam and Kamis, Zalina and Abdollah, Mohd Fairus and Mohd Aras, Mohd Shahrieel and Wasbari, Faizil and Mohd Ali, Nursabillilah and Chia, Clement Kuan You and Rizman, Zairi Ismael (2018) Develop And Implementation Of Voice Recognition Robotic Car. International Journal Of Engineering & Technology, 7 (3.14). pp. 242-249. ISSN 2227-524X

Mohd Suan, Mohd Shahadan and Ahmad, Nurulnabilah and Ismail, Syahriza and A. Bakar, F. I. (2018) Synthesis Of a Fe2o3 Nanowires/MWCNTS Composite For Photocatalyst. Journal of Physics: Conference Series, 1082. 012048. ISSN 1742-6596

Mohd Sultan, Juwita and Markarian, Garik and Benachour, Philip (2018) Analysis of BE and rtPS QoS in WiFi network. Armenian Journal Of Pyhsics, 11. pp. 309-321. ISSN 1829-1171

Mohd Tumari, Mohd Zaidi and Abd Rashid, Wan Norhisyam and Ab Hadi, Nik Azran and Ahmad, Mohd Ashraf and Suid, Mohd Helmi and Ghazali, Mohd Riduwan (2018) Liquid Slosh Suppression By Using Hybrid Model-Free Fuzzy-PID Controller With Derivative Filter. Journal Of Advanced Research In Dynamical And Control Systems, 10spec. pp. 1423-1433. ISSN 1943-023X

Mohd Tumari, Mohd Zaidi and Mohd Nasir, Muhamad Azidi and Saat, Shahrizal and A Subki, A Shamsul Rahimi and Abd Rashid, Wan Norhisyam and Suid, Mohd Helmi and Ghazali, Mohd Riduwan (2018) The Control Schemes Of Vehicle Steer By Wire System By Using Fuzzy Logic And Pid Controller. Research Journal Of Applied Sciences, 13 (2). pp. 137-145. ISSN 1815-932X

Mohd Yaakop, Nurazlin (2018) Direct torque control of dual induction motor drives fed by five-leg inverter for electric vehicles. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yusof, Norfadzlia and Zulkifli, Mohd Faizal and Mohd Yusof, Nor Yusma Amira and Azman, Azziana Afififie (2018) Smart Waste-Bin With Real-Time Monitoring System. International Journal Of Engineering And Technology(UAE), 7. pp. 725-729. ISSN 2227-524X

Mohd Zainal, Muhammad Iktisyam (2018) Single input fuzzy logic controller for yaw control of underwater remotely operated crawler. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohsen, Mowafak K. and Zakaria, Zahriladha and Abd Rahman, Tharek and Abdulhameed, Muhannad Kaml and Awang Md Isa, Azmi and Mohd Zin, Mohd Shahril Izuan and Md Saat, Mohd Shakir and Abu, Maisarah and Mohd Ibrahim, Imran and Mohamad Isa, Mohd Sa'ari and Ahmad, Asmala (2018) Novel Design And Implementation Of MIMO Antenna For LTE Application. Journal of Telecommunication, Electronic and Computer Engineering, 10 (2-8). pp. 43-49. ISSN 2180-1843

Moketar, Nor Aiza (2018) Validation Of Quality Requirements Through Requirements-Based Testing With Semi-Formalised Model. Doctoral thesis, UTeM.

Moriga, Toshihiro and Osman, EdyNoor and Abd Manaf, Mohd Edeerozey and Abd Rashid, Mohd Warikh and Murai, Kei-ichiro and Horikawa, Toshihide (2018) Photocatalytic Activity Of Nanostructured Tubular TiO₂ Synthesized Using Kenaf Fibers As A Sacrificial Template. Industrial Crops and Products, 113. pp. 210-216. ISSN 0926-6690

Muhamad Damanhuri, Amir Abdullah and Abdullah, Muhammad Ilman Hakimi Chua and Lubis, Abdul Munir Hidayat Shah and Zakaria, Muhammad Zulfattah and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2018) Development Of TEG Peltier Device For Heat Harvesting From 1.5 HP Split Unit Air Conditioning System. International Journal Of Applied Engineering Research, 13 (5). pp. 2390-2394. ISSN 0973-4562

Muhammad, Mohd Nazrin and Salcic, Zoran and Wang, Kevin I-Kai (2018) Detecting Turns And Correcting Headings Using Low-Cost INS. The Journal Of Navigation, 71 (1). pp. 189-207. ISSN 0373-4633

Muhammad Mustafa, Ahmad Nizamuddin and Hasan, Zulhasnizam and Ayob, Mohd Erdi and Arith, Faiz and Drahim, Noor Shazwani Najwa (2018) Design of CMOS schmitt triggers circuit for low application device. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 10 (1-8). pp. 73-77. ISSN 2289-8131

Muhammad Nasardin, Norul Rasyidi (2018) Design And Development Of Process And Production Plant For Agarwood Oil. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Shahril, Siti Hanum (2018) Design and control three phase AC to DC converter for grid connected applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Munawar, Rose Farahiyan and Arif, Afrana Baiti and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz and Mohd Suan, Mohd Shahadan and Othman, Intan Sharhida and Hasib, Hazman and Abu, Maisarah and Radiman, Shahidan and Mohd Hassan, Nurul Husna (2018) Effect of different cooking temperature and alkalinity on mechanical and morphological properties of composite sheet from durian shell waste fibre. Journal of Advanced Manufacturing Technology, 12 (1(3)). pp. 23-34. ISSN 1985-3157

Musa, Haslinda and Azmi, Fadlur Rahim and Abdullah, Abdul Rahim and Sedek, Muliati (2018) The Relationship of Emotional Intelligence and Stress In SMEs. IOSR Journal of Business and Management , 20 (3). pp. 36-39. ISSN e-ISSN: 2278-487X, p-ISSN: 2319-7668.

Musa, Masjuri (2018) The influence of blade parameters on the performance of propeller pico hydro turbine for rural electrification. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mustafa, Ahmad Khusaire (2018) Numerical Investigation Of Flow And Heat Transfer In Microchannel. Masters thesis, UTeM.

Mustafa, Zaleha and Ishak, Nor Fatiha and Othman, Radzali and Ahmad, Nor Naimah Rosyadah and Abd Rahim, Toibah and Sheikh Md Fadzullah, Siti Hajar and Tanner, K. Elizabeth (2018) In-Vitro Apatite Growth On Porous Â-Tricalcium Phoshpate Scaffolds Coated With PHVB. Journal Of Advanced Manufacturing Technology, 12. pp. 135-146. ISSN 2289-8107

Mustaffa, Nurul Akmil (2018) Synthesis and mechanical analysis of electroconductive high density polyethylene polyanilinedodecylbenzenesulfonic acid/alumina composite. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mustaffa Kamal, Muhammad Roshidi (2018) Managing Queuing Problems Through Online Booking System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Musthaffa, Azrul Affandhi and Mohamad Nor, Norazman and Yusof, Mohammed Alias and Yaakob, Mohd Yuhazri (2018) New Conceptual Design Of Portable Bamboo Bridge For Emergency Purposes. AIP Conference Proceedings, 1930 (1). pp. 1-9. ISSN 0094-243X

Muzaimi, Mohd Hafizzudin (2018) Factors Influencing Integrated Management System Practices. Masters thesis, Universiti Teknikal Malaysia Melaka.

N

Najem, Ibrahim Hamad Mohamed (2018) Analysis Of Energy Usage In Pusat Persatuan Pelajar. Masters thesis, UTeM.

Nasir, Nurulfazielah (2018) Effect of pore-forming agents in macroporous ceramic fabrication as carbon dioxide adsorption. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nawam, Muhammad Zaid and Mohd Rosli, Mohd Afzanizam and Rosli, Nor Azwar Syahila (2018) Simulation Study On The Effect Of Rear-Wing Spoiler On The Open Aerodynamic Performance Of Sedan Vehicle. Journal of Advanced Research In Fluid Mechanics And Thermal Sciences, 49 (2). pp. 146-154. ISSN 2289-7879

Ng, Xue Yan and Basari, Amat Amir and Kok, Swee Leong and Ahmad Nawir, Nur Amalina and Seiji, Hashimoto (2018) Evaluation of interfaced plate parameters on impact-based piezoelectric power generation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2). pp. 109-118. ISSN 2180-1843

Ngah Deman, Enda Nur Malia (2018) Impact test analysis on pure and recycled HDPE materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nirmal, Umar and Albawab, Tarek Mhd Moataz and Halim, Isa and Ahmed Salem, Mohammed and Elsayed, Mahmoud and Singh, Jasspeed (2018) A review on tribological wear test rigs for various applications. International Journal Of Integrated Engineering, 10. pp. 202-217. ISSN 2600-7916

Nirmal, Umar and Megat Ahmad, Megat Muhammad Hamdan and Yaakob, Mohd Yuhazri and Amir Mohamed, Kamarul (2018) Degradation Behaviour Of Treated Betelnut Fibres Reinforced Polyester Composites For Tribological Applications. World Review Of Science, Technology And Sustainable Development, 14 (2/3). pp. 180-227. ISSN 1741-2242

Norazman, Farhaneem (2018) Effect Of Acid Treated Biochar On Urea Fertilizer For Retaining Ammonium And Nitrate Ions In Soil. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nordin, Mohd Nur Azmi and Goda, Kohichi and Azhari, Muhamad Haikal and Kenji, Sakamoto and Okamoto, Masaki and Ito, Hirokazu and Endo, Takashi (2018) Tensile and impact properties of pulverized oil palm fiber reinforced polypropylene composites: A comparison study with wood fiber reinforced polypropylene composites. Journal Of Mechanical Engineering And Sciences, 12. pp. 4191-4202. ISSN 2289-4659

Nordin, Norsyuhada (2018) Performance Of Multilevel Inverters For Harmonic Reduction In Dynamic Voltage Restorer Application. Masters thesis, UTeM.

O

Omar, Nooririnah and Raja Mohd Rasi, Raja Zuraidah and Zainudin, Mohd Harris Fadhilah and Azhari, Muhamad Azwar and Yusuf, Yusliza and Mustafa, Nuzaimah and Azlan, Umar Al Amani and Razi, M. H.F.A. and Ismail, Syahriza and Mohamad, S. (2018) Experimental Study Of Welded Joints On Steel Plate Cold-Rolled Sheet Metal Using Different Electrode Tips. Journal of Advanced Manufacturing Technology (JAMT) , 12. pp. 1-16. ISSN 1985-3157

Omar, Salmah (2018) The Effect Of Stakeholder Pressure On Sustainable Performance Mediated By Eco-Innovation Practices. Doctoral thesis, UTeM.

Ong, Cheng Guan (2018) Effect of pad roughness on shear strength of thin small leadless package. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Hamizan (2018) Investment analysis of a new paint shop in automotive industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Nor Suriyanti (2018) Flexible robot configuration cell in manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Mohd Fairuz Iskandar and Bari, Md Ahsanul and Che Pee @ Che Hanapi, Ahmad Naim and Abd Rahim, Yahaya and Sulaiman, Hamzah Asyrani and Alqahtani, Fayez Hussain (2018) The level of information security awareness among academic staff in IHL. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10 (2-5). pp. 65-68. ISSN 2289-8131

Othman, Radzali and Mustafa, Zaleha and Ishak, Nor Fatiha and Pham, Trung Kien and Shamsudin, Zurina and Mohd Rosli, Zulkifli and Mohd Noor, Ahmad Fauzi (2018) Intermediate Phases Formed During Synthesis Of β-Tricalcium Phosphate Via Wet Precipitation And Hydrothermal Methods. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48 (2). pp. 141-147. ISSN 2289-7879

Othman, Zuraini and Abdullah, Azizi (2018) Adaptive Threshold And Piecewise Fitting For Iris Localisation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 153-158. ISSN 2180-1843

Ou, Yang Yu Xin (2018) A Framework Of Green Insurance To Safeguard Green Certified Commercial Buildings In Malaysia. (Submitted)

P

Pairan, Najatul Haya (2018) The Impact Of Government Enhancement Programmes On SME Performance In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Phuman Singh, Amrik Singh and Nishihara, Osamu (2018) Nondimensionalized univariate equation characterizing optimal state feedback control for collision avoidance. IEEE Transactions on Intelligent Transportation Systems, 19 (10). pp. 3344-3359. ISSN 1524-9050

Pratama, Satrya Fajri and Muda, Azah Kamilah and Choo, Yun Huoy (2018) Arbitrarily Substantial Number Representation For Complex Number. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-7). pp. 23-26. ISSN 2180-1843

Pratama, Satrya Fajri (2018) Three-Dimensional Exact Legendre Moment Invariants For Amphetamine-Type Stimulants Molecular Structure Representation. Doctoral thesis, UTeM.

Purnamirza, Teddy and Mohd Ibrahim, Imran and Budikesuma, Prayoga and Rahmi, Depriwana and Susanti, Rika (2018) A Small RLSA Antenna Utilizing The Specification Of Back Fires 17 dBi Lan Antennas. Telecommunication Computing Electronics And Control (TELKOMNIKA), 16 (6). pp. 2871-2878. ISSN 1693-6930

Purnamirza, Teddy and Mohd Ibrahim, Imran and Hasbi, Safrizal and Mulyono, Mulyono and Amillia, Fitri and Rahmi, Depriwana (2018) A Radial Line Slot Array (RLSA) Antenna With The Specifications Of 16 dBi Outdoor Patch Antenna. Telecommunication Computing Electronics And Control (TELKOMNIKA), 16 (1). pp. 46-52. ISSN 1693-6930

R

Radin Monawir, Radin Puteri Hazimah (2018) Human Spontaneous Emotion Detection System. Masters thesis, UTeM.

Radzid, Amirul Ramzani and Azmi, Mohd Sanusi and A. Jalil, Intan Ermahani and Draman @ Muda, Azah Kamilah and Melhem, Laith Bany and Arbain, Nur Atikah (2018) Framework of page segmentation for Mushaf Al-Quran based on multiphase level segmentation. International Journal of Computer Information Systems and Industrial Management Applications, 10. 028-037. ISSN 2150-7988

Rahim, Norain and Ab Aziz, Ab Wafi and Wan Hassan, Wan Haszerila and Che Aziz, Siti Asma and Abd Rashid, Wan Norhisyam and Rosdi, Rafi’uddin (2018) Intelligent Quad Cane With GPS Allocation For Tachyarrhythmia. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 10 (2-6). pp. 7-11. ISSN 2180-1843

Rahmalan, Hidayah and Chong, Wei Shin and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Zainal Abidin, Zaheera and Shibghatullah, Abdul Samad and Naim @ Mohayat, Mohd Hariz (2018) Edutainment Tools For Deaf And Impairment Hearing Children : A Survey. Advanced Science Letters, 4. pp. 1805-1808. ISSN 1936-6612

Rahman, Muhamad Hakim (2018) Improvement of vision inspection during tip to tip measurement through parameter optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Raja Abdullah, Raja Izamshah and Mohd Zakaria, Muhammad Akmal and Kasim, Mohd Shahir and Mohamed, S.B. (2018) Experimental Analysis On Parameters Affecting The Material Removal Rate In Wire Electrical Discharge Turning Using The Taguchi Method. International Journal Of Mechanical & Mechatronics Engineering (IJMME), 18 (05). pp. 75-82. ISSN 2227-2771

Raja Othman, Raja Nor Firdaus Kashfi and Md Zuki, Nor Aishah and Che Ahmad, Suhairi Rizuan and Abdul Shukor, Fairul Azhar and Mat Isa, Siti Zulaika and Othman, Md Nazri (2018) Modelling Of Torque And Speed Characterisation Of Double Stator Slotted Rotor Brushless DC Motor. IET Electric Power Applications, 12 (1). pp. 106-113. ISSN 1751-8660

Raja Othman, Raja Nor Firdaus Kashfi and Sulaiman, Farina and Abdul Shukor, Fairul Azhar and Azri, Maaspaliza and Ahmad, Mohd Saufi and Che Ahmad, Suhairi Rizuan and Jidin, Auzani and Sutikno, Tole (2018) Design And Analysis Of In-Wheel Double Stator Slotted Rotor BLDC Motor For Electric Bicycle Application. International Journal of Power Electronics and Drive Systems (IJPEDS), 9. pp. 457-464. ISSN 2088-8694

Raja Rosly, Raja Norhafiza and Hussin, Hanipah and Al-Shami, Samer Ali Hussein and Sidek, S. (2018) A Review On Massive Open Online Courses (MOOCs) TVET Design For Lecturers. Journal Of Advanced Research In Dynamical And Control Systems, 10 (07 SE). 841-852. ISSN 1943-023X

Rajkumar, Palaniappan and Sundaraj, Kenneth and Nabi, Fizza Ghulam (2018) An Overview Of Breath Phase Detection – Techniques & Applications. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-7). pp. 33-36. ISSN 2180-1843

Ramily, Nurlina Aimi (2018) Fabrication of floor tiles from recycled HDPE bottle filled recycled glass composite using hot press method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Mohammad Rasani, Mohammad Rasidi and Abdullah, Sharum and Fadli Ahmad, Muhamad Arif and Abdullah, Muhammad Fazrin (2018) Development Of Polymer Mechanical Properties Characteristics Using I-KAZ 4D Analysis Method. Jurnal Teknologi , 80. pp. 29-40. ISSN 2180-3722

Ramli, Siti Nur Rabiatutadawiah (2018) Mechanical performance of pineapple leaf fibre reinforced polylactic acid biocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ranom, Rahifa and Rahim, N. A. A. and Zainuddin, Hidayat (2018) Mechanism Of The Free Charge Carrier Generation In The Dielectric Breakdown. Journal Of Physics: Conf. Series, 949. pp. 1-11. ISSN 1742-6588

Razi, Atikah and Hidayat, Muhammad Nabil and Seroji, Mohammad Nawawi (2018) Microinverter Topology Based Single-Stage Grid-Connected Photovoltaic System: A Review. Indonesian Journal Of Electrical Engineering And Computer Science, 11 (2). pp. 645-651. ISSN 2502-4752

Roseli, Adnan and Zainol, Sabri Adlan and Abdul Munir, Fudhail and Mohamad Nasir, Asnawi (2018) Experimental Study On The Effect Of Intake Air Temperature On The Performance Of Spark Ignition Engine Fueled With Hydrogen Peroxide. ARPN Journal Of Engineering And Applied Sciences, 13. pp. 3388-3394. ISSN 1819-6608

Roslan, Nur Saidatul Akmal and Abdul Hamid, Nurfaizey and Md Isa, Mohamed Hafiz and Muhammad, Noryani and Mansor, Mohd Ridzuan and Abdul Munajat, Nurain (2018) Nylon Electrospun Nanofibre Water Filtration Media For Wastewater Treatment. Materials Research Express, 5 (10). pp. 1-11. ISSN 2053-1591

Rosli, Nor Ana (2018) Design, development and performance of a low cost three-dimensional metal printer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosli, Nor Azwar Syahila and Hasan, Rafidah and Ng, Wai Hoe and Baharudin, Muhammad Khairi and Alkahari, Mohd Rizal (2018) Investigation on process-properties relationship with mechanical properties of lattice-structured cellular material for lightweight application. International Journal Of Engineering And Technology (UAE), 7 (3.17). pp. 1-4. ISSN 2227-524X

Rosmadi, Nurul Atikah (2018) A Software Requirements Defect Management Approach Using Negotiation Technique To Improve Software Requirements Quality. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rshieh, Malik Raihan (2018) Analysis of energy usage of the library building in UTeM main campus. Masters thesis, Universiti Teknikal Malaysia Melaka.

S

Sabaruddin, Saiful Akmal (2018) Modelling and simulation of water-based hydraulic hybrid driveline. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safian, Mohd Azizul Hikmi (2018) The optimization of T6 heat treatment on microstructure and mechanical properties of thixoformed LM4 aluminium alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Said, Zaitul Akma (2018) Improvement of engine bracket design by using topology optimization and additive manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salahuddin, Lizawati and Ismail, Zuraini (2018) Hospital Information Systems (HIS) In The Examination Rooms And Wards:Doctors Perceived Positive Impact On Quality Of Care And Patient Safety. International Journal Of Engineering & Technology (UAE), 07. pp. 871-875. ISSN 2227-524X

Salahuddin, Lizawati and Mohd Yaacob, Noorayisahbe and Abd Ghani, Mohd Khanapi and Abdul Samad, Shibghatullah (2018) A Review On Electronic Personalized Health Records. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 10. pp. 77-81. ISSN 2180-1843

Salahuddin, Lizawati and Raja Ikram, Raja Rina and Ismail, Nor Haslinda and Naim @ Mohayat, Mohd Hariz and Hashim, Ummi Rabaah and Ismail, Zuraini (2018) Sociotechnical Factors Influencing Unsafe Use Of Hospital Information Systems:A Qualitative Study In Malaysian Government Hospitals. Health Informatics Journal. pp. 7-21. ISSN 1460-4582

Saleh, Nurhazwani (2018) Identification Of Harmonic Source For Electric Arc Furnace Load Using Fast-Fourier Transform. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saleman, Abdul Rafeq and Abdul Munir, Fudhail and Mohamad Zin, Mohd Rody and Yob, Mohd Shukri and Gota, Kikugawa and Taku, Ohara (2018) Heat Transport At Solid-Liquid Interfaces Between Face-Centered Cubic Lattice And Liquid Alkanes. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 44 (1). pp. 123-130. ISSN 2289-7879

Salim, Mohd Azli and Mokhlis, M. and Masripan, Nor Azmmi and Md.Saad, Adzni and Omar, Ghazali (2018) Nano Indentation Studies On Graphene Nanoparticles Reinforced Epoxy Resin As Conductive Ink. International Journal Of Advanced Materials Characterization, 1. pp. 8-11. ISSN 2227-3886/2347-1891

Salim, Mohd Azli and Md. Saad, Adzni and Termiti, Zarif Hasif and Omar, Ghazali (2018) Properties Of Graphene And Its Application On Electronic Industries–A Review. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451

Salim, Mohd Azli and Mokhlis, Maizura and Omar, Ghazali and Rahim, N.A.A and Md. Saad, A. (2018) Investigation On Elasticity Rate Of Silver Nano-Particles-Filled Epoxy Conductive Ink. International Journal Of Advanced Materials Characterization, 1 (1). p. 4. ISSN 2636-9451

Salim, Mohd Azli and Termiti, Zarif Hasif and Md. Saad, Adzni and Omar, Ghazali (2018) Analysis On Stress-Strain Performance Of ABS/PLA Material Used In Geospatial Solution. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451

Salim, Nur Anis Suraya (2018) Analysis On The Performance Of The Blade Design For The Wind Turbine System From An Air Conditioner System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salim, Sani Irwan (2018) Optimized Fast Fourier Transform Architecture Using Instruction Set Architecture Extension In Low-End Digital Signal Controller. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Salim, Sani Irwan and Soo, Yew Guan and Samsudin, Sharatul Izah (2018) Instruction Set Extension Of A Low-End Reconfigurable Microcontroller In Bit-Sorting Implementation. International Journal Of Electrical And Computer Engineering (IJECE), 8 (4). pp. 2595-2601. ISSN 2088-8708

Salim, Sani Irwan and Soo, Yew Guan and Samsudin, Sharatul Izah (2018) Application Specific Instruction Set Processor (ASIP) Design In An 8-Bit Softcore Microcontroller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-8). pp. 57-61. ISSN 2180-1843

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157

Salleh, Mohd Shukor and Abdul Rahman, Mohd Hafizi and Ab. Razak, Mohd Suffian and Mohamad Kamal, Mohamad Ridzuan and Marjom, Zolkarnain and Anuar, Liza and Mohamad Saad, Nur Adzly (2018) Design And Optimization Of Front Lower Control Arm (FLCA) For C-Segment Passenger Car. International Journal Of Engineering & Technology, 7. pp. 71-75. ISSN 09754024, 23198613

Salleh, Mohd Shukor and Minhat, Mohamad and Hussein, Nur Izan Syahriah and Abdul Rahim, Mohd Aidil Shah (2018) A Comprehensive Review On Cold Work Of AISI D2 Tool Steel. Metallurgical Research & Technology, 115 (1). pp. 1-12. ISSN 2271-3646

Salleh, Muhammad Sharilazlan (2018) An enhanced malay named entity recognition using clustering and classification approach for crime textual data analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salleh, Nazahiah (2018) Layout Improvement At Small And Medium Industry : A Case Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salleh, Nurfarahin (2018) Renewable Energy Adoption For Energy Complimentary : Readiness Of Offshore Wind Turbines Application In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sam, Mei Lee (2018) Properties Of Indefinite Matrix Constraints For Linear Programming In Optimal Solution. Masters thesis, UTeM.

Sam, Mei Lee and Saptari, Adi and Salleh, Mohd Rizal and Mohamad, Effendi (2018) Comparison Between Linear Programming And Integer Linear Programming: A Review. International Journal Of Mathematics In Operational Research (IJMOR), 13 (1). pp. 91-106. ISSN 1757-5850

Sam, Weng Yik (2018) Enhanced Design Of Electronically Reconfigurable Integrated Microwave Filter And Antenna For Wireless Communication Systems. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Samsudin, Sharatul Izah and Osman, Khairuddin and Salim, Sani Irwan and Sulaiman, Siti Fatimah and Ahmad Sabri, Muhammad Irshad (2018) A Smart Monitoring Of A Water Quality Detector System. Indonesian Journal of Electrical Engineering and Computer Science, 10 (3). pp. 951-958. ISSN 2502-4752

Samsudin, Sharatul Izah and Sulaiman, Noor Asyikin and Md Yusop, Azdiana and M. Salim, Sani Irwan (2018) A Comparative Study Of Enhanced Nonlinear PI To Multivariable Nonlinear Plant. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 2-7. ISSN 2180-1843

Sapee, Mohd Sukri Sazlan (2018) Productivity improvement of mark, scan and pack process through lean Six Sigma. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sarban Singh, Ranjit Singh and Baljit, S.S.S. and Wong, Yan Chiew (2018) Research And Development Of The Hierarchical Switching Charging Discharging System For Continuous Sustainability. Journal of Engineering and Applied Sciences, 12 (7). pp. 8030-8034. ISSN 1816-949X

Sarkawi, Hafez and Yoshito, Ohta and Paolo, Rapisarda (2018) Preliminary finding on the switching control algorithm for the stabilization of the DC-DC Zeta converter. In: Proceedings of the SICE Annual Conference 2018, 11-14 September 2018, Nara, Japan.

Saw, Yee Ching (2018) Feature Ranking Techniques For 3D ATS Drug Molecular Structure Identification. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sazali, Muhammad Aizat (2018) Design Of Hybrid RF Diplexer And Triplexer For Multiband WiMAX Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sehen, Mohanad Sabri (2018) Energy performance of rapid bus route. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shikh Anuar, Fadhilah and Abdi, Iman Ashtiani and Hooman, Kamel (2018) Flow Visualization Study Of Partially Filled Channel With Aluminium Foam Block. International Journal Of Heat And Mass Transfer, 127. pp. 1197-1211. ISSN 0017-9310

Shikh Anuar, Fadhilah and Abdi, Iman Ashtiani and Odabaee, Mostafa and Hooman, Kamel (2018) Experimental Study Of Fluid Flow Behaviour And Pressure Drop In Channels Partially Filled With Metal Foams. Experimental Thermal And Fluid Science, 99. pp. 117-128. ISSN 0894-1777

Subramaniam, Nalini (2018) Innovation Factors Toward Enhancing Organisation Performance : A Study On The Malaysian Healthcare Sector. Masters thesis, Universiti Teknikal Malaysia Melaka.

Subramaniam, Siva Kumar and Khan, Shariq Mahmood and Titik, Anhar and Nilavalan, Rajagopal (2018) Static Pipeline Network Performance Optimisation Using Dual Interleave Routing Algorithm. IIUM Engineering Journal, 19 (1). pp. 129-143. ISSN 1511-788X

Sukri, Mohamad Firdaus and Jamali, Mohamad Khairulazahar (2018) Economic Analysis Of An Inverter And Non-Inverter Type Split Unit Air-Conditioners For Household Application. ARPN Journal Of Engineering And Applied Sciences, 13 (11). pp. 3749-3757. ISSN 1819-6608

Sulaiman, Farina and Raja Othman, Raja Nor Firdaus Kashfi and Ahmad, Mohd Saufi and Jidin, Auzani and Sutikno, Tole (2018) Winding Arrangement Of A New Type Hollow Rotor BLDC Motor. International Journal Of Power Electronics And Drive System (IJPEDS), 9 (3). pp. 933-946. ISSN 2088-8694

Sulaiman, Marizan and Mohamad Nor, Ahmad Fateh and Ammar, Naji (2018) Long –Term Load Forecasting Of Power Systems Using Artificial Neural Network And Anfis. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 828-834. ISSN 1819-6608

Sulaiman, Mohd Amri and Mat, Siti Asiyah and Razak, Muhammad Shahmi and Ramle, Zuraimi and Mohamad, Effendi and Che Haron, Che Hassan and A Ghani, Jaharah (2018) Performance Of CVD Coated Carbide Tool By Optimizing Machining Parameters During Turning Titanium Alloy Ti-6AL-4V ELI In Flooded Condition. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 401-412. ISSN 1985-3157

Sulaiman, Nur Hidayah (2018) Sensitivity Enhancement Of Optical Fiber Sensor For Liquid Sensing Applications By Using Mach-Zehnder Interferometer. Masters thesis, UTeM.

Sundaraj, Kenneth and Talib, Irsa and Chee, Kiang Lam and Nabi, Fizza Ghulam (2018) Development Of A Standalone Application To Measure Crosstalk In MMG Signals From Forearm Muscles During Wrist Postures. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 103-106. ISSN 2180-1843

Sundaraj, Kenneth and Ahmed, Md. Razu and Khatun, Mst. Arifa and Ali, Md. Asraf (2018) A Literature Review On NoSQL Database For Big Data Processing. International Journal Of Engineering And Technology (UAE), 7. pp. 902-906. ISSN 2227-524X

Sundaraj, Kenneth and Nabi, Fizza Ghulam and Lam, Chee Kiang and Palaniappan, Rajkumar and Hussain, Jawad (2018) Recommendations Related To Wheeze Sound Data Acquisition. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 117-120. ISSN 2180-1843

Sundaraj, Kenneth and Palaniappan, Rajkumar and Sundaraj, Sebastian and Huliraj, N. and Revadi, S. S. (2018) Classification Of Pulmonary Pathology From Breath Sounds Using The Wavelet Packet Transform And An Extreme Learning Machine. Biomedizinische Technik, 63. pp. 383-394. ISSN 1862-278X

Sundaraj, Kenneth and Rahman, Sam Matiur and Rabbi, Mohammad Fazle and Altwijri, Omar and Alqahtani, Mahdi and Sikandar, Tasriva and Abdelaziz, Izzeldin Ibrahim and Ali, Md. Asraf (2018) Fuzzy Logic-Based Improved Ventilation System For The Pharmaceutical Industry. International Journal Of Engineering And Technology (UAE), 7. pp. 640-645. ISSN 2227-524X

Sundaraj, Kenneth and Rajamani, Y and Lam, Chee Kiang and Zulkefli, N. and Mohamad@Ismail, M. R. (2018) Analysis And Classification Of Multiple Hand Gestures Using MMG Signals. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 67-71. ISSN 2180-1843

Sundaraj, Kenneth and Talib, Irsa and Lam, Chee Kiang (2018) Choice Of Mechanomyography Sensors For Diverse Types Of Muscle Activities. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 79-82. ISSN 2180-1843

Suryana, Nanna and Anshar, Khairul and Abdullah, Noraswaliza (2018) The Potential Application Of Blind Write Protocol. International Journal Of Computer Information Systems And Industrial Management Applications, 10. pp. 219-226. ISSN 2150-7988

Suryana, Nanna and Utomo, Fandy Setyo and Azmi, Mohd Sanusi (2018) Quran Ontology: Review On Recent Development And Open Research Issues. Journal Of Theoretical And Applied Information Technology, 96 (3). pp. 568-581. ISSN 1992-8645

Sutanto, Daniel Hartono (2018) An Improved Diabetes Risk Prediction Framework : An Indonesian Case Study. Doctoral thesis, UTeM.

Syahril, Ilham Hadi (2018) Matching plate design technique for PZT type lamb wave transducers. Masters thesis, Universiti Teknikal Malaysia Melaka.

T

Talib, Md Hairul Nizam and Yahya Farah, Nabil Salem and Ibrahim, Zulkifilie and Rasin, Zulhani and Rizman, Z. I. (2018) Experimental Investigation Of Different Rules Size Of Fuzzy Logic Controller For Vector Control Of Induction Motor Drives. Journal Of Fundamental And Applied Sciences, 10. pp. 1696-1717. ISSN 1112-9867

Talib, Mohammed Saad and Hassan, Aslinda and Hussin, Burairah and Abal Abas, Zuraida and Saad Talib, Zaniab and Rasoul, Zainab Sabah (2018) A Novel Stable Clustering Approach Based On Gaussian Distribution And Relative Velocity In VANETs. International Journal Of Advanced Computer Science And Applications (IJASCA), 9 (4). pp. 216-220. ISSN 2158-107X

Tan, Chee Nian (2018) A fault diagnosis expert system on building air conditioning system for construction 4.0. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teo, Boon Guan (2018) Process Parameter Optimization Of Adhesive Dispense Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teoh, Yong Siang (2018) Development Of Overall Performance Effectiveness In Job Shop Manufacturing Process. Doctoral thesis, UTeM.

Thiab, Ali Shawket and Shibghatullah, Abdul Samad and Mohd Yusoh, Zeratul Izzah (2018) Internet Of Things-Proactive Security Approach. Journal Of Engineering And Applied Sciences, 13 (9). pp. 2668-2671. ISSN 1816-949X

Thiab, Ali Shawket and Shibghatullah, Abdul Samad and Mohd Yusoh, Zeratul Izzah (2018) The Role Of Access Control And Device Authentication In The Internet Of Things. Journal Of Engineering And Applied Sciences, 13 (9). pp. 2680-2684. ISSN 1816-949X

Toh, Cheng Chuan (2018) Blind Source Separation Using Two-Dimensional Nonnegative Matrix Factorization In Biomedical Field. Masters thesis, UTeM.

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah and Mohd Ali, Nursabillilah and Musa, Haslinda (2018) A Detail Study Of Wavelet Families For EMG Pattern Recognition. International Journal Of Electrical And Computer Engineering (IJECE), 8 (6). 4221 -4229. ISSN 2088-8708

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah and Mohd Ali, Nursabillilah and Tee, Wei Hown (2018) A New Competitive Binary Grey Wolf Optimizer To Solve The Feature Selection Problem In EMG Signals Classification. Computers, 7 (4). pp. 1-18. ISSN 2073-431X

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah and Mohd Ali, Nursabillilah and Tengku Zawawi, Tengku Nor Shuhada (2018) Application Of Spectrogram And Discrete Wavelet Transform For EMG Pattern Recognition. Journal Of Theoretical And Applied Information Technology, 96 (10). pp. 3036-3047. ISSN 1992-8645

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah and Mohd Ali, Nursabillilah and Tengku Zawawi, Tengku Nor Shuhada (2018) Deep Convolutional Neural Network For Featureless Electromyogram Pattern Recognition Using Time-Frequency Distribution. Sensor Letters, 16 (2). pp. 92-99. ISSN 1546-198X

Too, Yi Wei (2018) Development Of Computer Ergonomics Risk Assessment (COM-ERA) Tool For Assessing Work-Related Musculoskeletal Disorders (WMSDS) Associated With Computing Tasks. Masters thesis, Universiti Teknikal Malaysia Melaka.

W

Wan Mahmood, Wan Hasrulnizzam and A., Fatimah and Kamat, Seri Rahayu and Hambali, Ruzy Haryati and Mohd Razlam, Noor Amira (2018) Level Of Indoor Air Quality Among Malaysian Commuter Users: A Case Study. Malaysian Journal Of Public Health Medicine (MJPHM), Spec 2. pp. 79-88. ISSN 1675-0306

Wan Mohd Yusoff, Wan Mohd Azahar (2018) Analysis of surface intergrity and tool wear during machining high thermal conductivity steel 150 (HTCS- 150). Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Zulkifli, Wan Amirul Shafiz (2018) The effects of surface treatments on properties and corrosion protection of AZ91D magnesium alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Kuan Lih (2018) Preliminary study of key performance indicators for sustainability in health care industry in Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Yan Chiew and Asli, Astrie Nurasyeila Fifie (2018) -31 DBM Sensitivity High Efficiency Rectifier For Energy Scavenging. International Journal Of Electronics And Communications, 1. pp. 44-54. ISSN 1434-8411

Wong, Yan Chiew and Lee, Yan Qing (2018) Design and development of deep learning convolutional neural network on an field programmable gate array. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 10 (4). pp. 25-29. ISSN 2180-1843

Y

Yaacob, Mohd Rusdy and Schlander, Rasmus Korslund and Buchhave, Preben and Velte, Clara M. (2018) Experimental Evaluation Of Kolmogorov - Fs -5/3 And 2/3 Power Laws In The Developing Turbulent Round Jet. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 45 (1). pp. 14-21. ISSN 2289-7879

Yaacob, Siti Salwani and Mahdin, Hairulnizam and Saedudin, RD Rohmat and Ahmad Hijazi, Mohd Hanafi and Azmi, Mohd Sanusi and Rais, Nor Azlina (2018) A Review On Complex Event Processing In RFID System. International Journal On Advanced Science, Engineering And Information Technology, 8 (4). pp. 1154-1159. ISSN 2088-5334

Yahaya, Nurul 'Atiqah (2018) University-industry collaboration and research product commercialization : a case study in selected higher learning institution. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yahaya, Saifudin Hafiz and Yaakob, Mohd Yuhazri and W.N., Hidayah and Haeryip , Sihombing and Sulaiman, Shamsudin and A.M, Kamarul (2018) Kansei Engineering Approach For The Customers Preferences Of Car Design. Advances in Intelligent Systems and Computing, 739. pp. 289-295. ISSN 2194-5357

Yahaya, Saifudin Hafiz and W. N., Hidayah and Salleh, Mohd Shukor and Abdullah, Abu and H., Sihombing (2018) Customer Preferences In Car Design Using Kansei Engineering And Cubic Bezier Curve. International Journal Of Engineering & Technology, 7 (4). pp. 4170-4173. ISSN 2227-524X

Yahaya, Saifudin Hafiz and Yaakob, Mohd Yuhazri and Abdullah, Abu and Husin, Mohd Amirhafizan and Kamarul, A.M. and Lau, S.T.W. (2018) Kenaf Fibre Composites As Promising Green-Composites For Automotive Car Door Map Pocket Application. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (2). pp. 15-21. ISSN 2227-2771

Yakop, Mohd Halim (2018) Automated System – Application Of AHP And Topsis Analysis For Productivity Improvement. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yoong, Sai Sieng (2018) New overall equipment effectiveness framework development with integration of maynard operation sequence technique for losses visualization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yunus, Ahmad Rozelan and Syed Hassan, Syed Najmuddin and Kamarudin, Mohd Fauzi and Abdul Majid, Izaidin and Mohd Saufi, Nor Salahfiah (2018) Integrated personality profiling for academic performance. In: The 5th International Conference on Research in Islamic Education & Arabic languages 2018, 24 - 26 January 2018, Bandar Seri Begawan, Brunei.

Yusof, Ahmad Anas and Misha, Suhaimi and Md Isa, Mohamed Hafiz and Wasbari, Faizil and Ibrahim, Mohd Qadafie and Kasim, Mohd Shahir (2018) Simulation And Experimentation Of Water Hydraulics Technology For Automatic Traditional Cookies Production. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 47 (1). pp. 136-150. ISSN 2289-7879

Yusop, Noorrezam (2018) An Automated Approach To Elicit And Validate Security Requirements Of Mobile Application. Doctoral thesis, UTeM.

Yusop, Yusmarnita (2018) New Power Converter Topology For Low Power Rotary Capacitive Power Transfer System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Z

Zahari, Mohd Khairy (2018) Lossy resonator with high Q for switchable absorptive bandstop to bandpass filter. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Zainal Abidin, Amar Faiz and Mohd Ali, Nursabillilah and Mat Zain, Norlina and Abdul Majid, Masmaria and Rifin, Rozi and Kadiran, Kamaru Adzha and Mohd Mokji, Ahmad Musa and Tan, Kok and Amirulah, Rahman (2018) A Study On The Application Of Gravitational Search Algorithm In Optimizing Stereo Matching Algorithm’s Parameters For Star Fruit Inspection System. ARPN Journal Of Engineering And Applied Sciences, 13 (4). pp. 1212-1217. ISSN 1819-6608

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Harum, Norharyati and Ayop, Zakiah (2018) Development Of Pupil Detection In Eye Movement With Raspberry Pi. International Journal Of Human And Technology Interaction (IJHaTI), 2 (2). pp. 43-48. ISSN 2590-3551

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Harum, Norharyati and Baharon, Mohd Rizuan and Mat Ariff, Nor Azman and Abal Abas, Zuraida and Hong, Ee-Song and Ayop, Zakiah (2018) Crypt-tag authentication in NFC implementation for medicine data management. International Journal of Advanced Computer Science and Applications, 9 (9). pp. 93-100. ISSN 2158-107X

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Ayop, Zakiah and Harum, Norharyati (2018) Development Of Pupil Detection In Eye Movement With Raspberry Pi. International Journal Of Human And Technology Interaction, 2. pp. 43-48. ISSN 2600-8122

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Baharon, Mohd Rizuan and Harum, Norharyati and Ayop, Zakiah and Mat Ariff, Nor Azman and Hong, Ee-Song and Abal Abas, Zuraida (2018) Crypt-tag authentication in NFC implementation for medicine data management. International Journal Of Advanced Computer Science And Applications, 9 (9). pp. 93-100. ISSN 2156-5570

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Harum, Norharyati and Low, Chen Hau and Ali, Nabeel Saleh and Jafar, Fairul Azni (2018) Wireless Internet Of Things-Based Air Quality Device For Smart Pollution Monitoring. International Journal Of Advanced Computer Science And Applications (IJASCA), 9. pp. 65-69. ISSN -

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Hashim, Nurul Akmal and Ahmad, Rabiah and A. Perumal, Puvanasvaran (2018) Risk Assessment Method For Insider Threats In Cyber Security : A Review. International Journal Of Advanced Computer Science And Applications, 9 (11). pp. 126-130. ISSN 2156-5570

Zainoddin, Muhamad Hafiy Syazwan (2018) Effects Of Cellulose Bridging Phenomenon On Breakdown Voltage And Conduction Current Characteristics In Mineral And Ester Transformer Oils. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Hidayat and Zahari, Ayuamira and Ambo, Nur Farhani and Sutan Chairul, Imran and Kamarudin, Muhammad Saufi and Mohd Wari, Jamaludin (2018) Development Of Test Vessel For Gas Insulation Breakdown Test. International Journal of Power Electronics and Drive Systems (IJPEDS, 9 (2). pp. 873-879. ISSN 2088-8694

Zainuddin, Hidayat and Ambo, Nur Farhani and Zahari, Ayuamira and Kamarudin, Muhammad Saufi and Mohd Wari, Jamaludin (2018) Finite Element Analysis Of Maximum Electric Field For Air Breakdown Under Various Electrode Configurations. Indonesian Journal Of Electrical Engineering And Computer Science, 10. pp. 416-425. ISSN 2502-4752

Zakaria, Kamarul Ariffin and Idris, Mohamad Iqmal Faris and Dhar Malingam, Sivakumar and Salleh, Suhaila and Sanusi, Nortazi and Mohd Daud, Mohd Ahadlin (2018) Fatigue strain signal characteristic and damage of automobile suspension system. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 221-225. ISSN 1819-6608

Zakaria, Mohamad Shukri and Ismail, Farzad and Tamagawa, Masaaki and Abdul Azi, Ahmad Fazli and Wiriadidjaya, Surjatin and Basri, Adi Azriff and Ahmad, Kamarul Arifin (2018) Computational fluid dynamics study of blood flow in aorta using OpenFOAM. Advanced Research In Fluid Mechanics And Thermal Sciences, 43 (1). pp. 81-89. ISSN 2289-7879

Zakaria, Nurul Azma and Zainal Abidin, Zaheera and Harum, Norharyati and Low, Chen Hau and Al-BaChaChee, Nabeel Salih Ali and Jafar, Fairul Azni (2018) Wireless Internet Of Things-Based Air Quality Device For Smart Pollution Monitoring. International Journal of Advanced Computer Science and Applications, 9 (11). pp. 65-69. ISSN 2158-107X

Zakaria, Zahriladha and Shairi, Noor Azwan and Zobilah, Abdullah Mohammed S. and Ahmad, Badrul Hisham and Zahari, Mohd Khairy and Wong, Peng Wen (2018) Simulation Analysis On The Potential Application Of Matched Bandstop To Bandpass Filter In Filter Integrated SPDT Switch Design. Journal Of Telecommunication, Electronic And Computer Engineering, 10. pp. 127-131. ISSN 2180–1843

Zakaria, Zahriladha and Hassan, Nornikman and Ismail, Mohd Khairy and Ahmad, Badrul Hisham and Nordin, Nurul Syahira and Zahari, Mohd Khairy and Abdul Malek, Mohd Fareq (2018) Design Of Multiband Matched Band-Stop Filter Using T-Shape Resonator Network System. Journal Of Theoretical And Applied Information Technology, 96. pp. 7760-7770. ISSN 1992–8645

Zaqout, Ahmed Z. I. (2018) Predictive study of fluid flow through an intake system restrictor of a single-seater racing car. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zohedi, Fauzal Naim and Rahmat, Muhammad Aizuddin and Kasdirin, Hyreil Anuar (2018) A Critical Analysis Of Fuzzy Logic Controller For Slip Control In Antilock Braking System (ABS). International Journal of Engineering & Technology, 7 (3.28). pp. 116-123. ISSN 2227-524X

Zulkafli, Nur Izyan and Kopanos, Georgios M. (2018) A General Optimization Framework For The Design And Planning Of Energy Supply Chain Networks: Techno-Economic And Environmental Analysis. Chemical Engineering Research and Design, 131. pp. 214-233. ISSN 0263-8762

Zulkipli, Nur Hidayah (2018) Effects Of Argon Shielding Gas Flow Rate On Welding Quality Of Mild Steel. Masters thesis, Universiti Teknikal Malaysia Melaka.

This list was generated on Sun Oct 6 10:41:14 2024 +08.