Browse By Repository:

 
 
 
   

Items where Year is 2012

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: | ' | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 1171.

Hannan, MA and Azidin, FA and Mohamed, Azah (2012) Multi-sources model and control algorithm of an energy management system. Energy Conversion and Management. pp. 123-130. ISSN 0196-8904

Hasan, Nor Halim and Said, Mohd Radzai and Leman, Abdul Mutalib and D.Pagukuman, B.Norerama and Othman, Jaafar (2012) Data Comparison on Fumes Local Exhaust Ventilation: Examination and Testing Compliance to USECHH Regulation 2000. In: Scientific Conference on Occupational Safety & Health, 12-13 Dec. 2012, NOSH Bandar Baru Bangi.

Ibrahim, A.B and Othman, A.R and Husain, M.N and Johal, M.S (2012) The Cascode and Cascaded Techniques LNA at 5.8GHz Using T-Matching Network for WiMAX Applications. IJCTE, Vol. 4 (No. 1). pp. 93-97. ISSN 1793-8201

Ibrahim, Abu Bakar and Othman, Abdul Rani and Husain, Mohd Nor and Johal, Mohammad Syahrir (2012) Design of LNA at 5.8GHz with Cascode and Cascaded Techniques Using T-Matching Network for Wireless Applications. International Journal on Advanced Science Engineering Information Technology(IJASEIT), Vol. 2 (2012) (No. 1). pp. 45-48. ISSN 2088-5334

Ibrahim, Abu Bakar and Othman, Abdul Rani and Husain, Mohd Nor and Johal, Mohamad Syahrir and Hamidon, J. Sam (2012) The Cascode LNA with RF Amplifier at 5.8GHz Using T-Matching Network for WiMAX Applications. JTEC, Vol. 4 (No. 1). pp. 15-21. ISSN 2180 - 1843

Nornikman, H and Ahmad, B. H. and Othman, A. R and Abdul Aziz, M. Z. A and Malek, F and Imran, H (2012) STUDY AND SIMULATION OF AN EDGE COUPLE SPLIT RING RESONATOR (EC-SRR) ON TRUNCATED PYRAMIDAL MICROWAVE ABSORBER. Progress In Electromagnetics Research, Vol. 1. pp. 319-334. ISSN 1070-4698

'

'Adilah, Mohd Arifin (2012) Digital Folklore Storybook For Android Apps: "Al-Kisah Puteri Santubong Dan Puteri Sejinjang". Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A, Hambali and A.R, Rabiatul and A.S, Rahim and S, Taufik (2012) DESIGN OPTIMIZATION OF AUTOMOTIVE BUMPER BEAM THROUGH ENERGY ABSORPTION ANALYSIS. International Journal of Engineering and Science, 13 (1). pp. 35-40. ISSN 2086-3799

A, Hambali and M.S, Izzati and A.A, Tajul and A.R, soufhwee and Roni Sahroni, Taufik (2012) Application of Analytical Hierarchy Process (AHP) in Material Selection Process for Automotive Bumper Fascia. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

A, Hambali and R, Faiz and A.A, Tajul and A.B, Baharudin and M.M.P, Dan (2012) Development of conceptual design of Car Housing Side Mirror using Integrated Approach. Journal of Advanced Manufacturing Technology. pp. 31-40. ISSN 1985-3157

A, hambali and L.I, Intan and A.A, Tajul and A.R, Soufhwee and Roni Sahroni, Taufik (2012) Selection of Manufacturing Process for Automotive Bumper Fascia Using Analytical Hierarchy Process. In: International Conference on Design and Concurrent Engineering 2012, October 15–16, 2012, Equatorial Hotel, Melaka.

A,H, Azni and Rabiah , Ahmad and Hasan Basari, Abd Samad and Hussin , Burairah (2012) Correlated Node Behavior Model based on Semi Markov Process for MANETS. International Journal of Computer Science Issues . pp. 50-59. ISSN 1694-0814

A. P., Puvanasvaran (2012) Enhancing Productivity Through Lean Behavior. In: Theoretical and Methodological Approaches to Social Sciences and Knowledge Management. INTECH, pp. 283-306. ISBN 978-953-51-0687-6

A. P., Puvanasvaran (2012) Evolution Sustainable Innovation Management in China. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran (2012) Interrelationship Between Availability With Planning Factor and Mean Time Between Failures (MTBF) in Overall Equipment Effectiveness (OEE). Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 29-38. ISSN 1985-3157

A. P., Puvanasvaran (2012) Overall Equipment Efficiency (Oee) Improvement Through Integrating Quality Tool: Case Study. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran (2012) A Study on the Effect of Different Interconnection Materials (Wire and Bond Pad) on Ball Bond Strength after Temperature Cycle Stress. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran (2012) Sustainability of Green Technology in Malaysia Industry. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15-16 October 2012, Universiti Teknikal Malaysia Melaka (UTeM).

A. P., Puvanasvaran (2012) University-SME clusters: A research on commercialization perspective among IPTA & IPTS in Malaysia. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (IC-TMT) 2012, 1 (1). pp. 10-20. ISSN IC-TMT 2012

A. P., Puvanasvaran (2012) Workshop Store Room Improvement With 5s: A Case Study. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

A. P., Puvanasvaran and M. R., Muhamad (2012) Lean principles adoption in environmental management system (EMS): A survey on ISO 14001 certified companies in Malaysia. Journal of Industrial Engineering and Management, 5 (2). pp. 406-430. ISSN 2013-8423

A. P., Puvanasvaran and M. R. , Muhamad (2012) INTEGRATION MODEL OF ISO 14001 WITH LEAN PRINCIPLES. American Journal of Applied Sciences, 9 (12). pp. 1974-1978. ISSN 1546-9239

A. P. , Puvanasvaran (2012) Employability Skills Assessment Tool Development. International Education Studies, 5 (5). pp. 43-56. ISSN 1913-9039

A.Perumal, Puvanasvaran (2012) Lean Manufacturing -Module 5. Penerbit UTeM, UTeM.

A.R.M, Warikh and Mohd Rosli, ZULKIFLI and Gakim, Miron and M.A, ASYADI AZAM (2012) Formation of Cr23C6 during the Sensitization of AISI 304 Stainless Steel and its Effect to Pitting Corrosion. International Journal of Electrochemical Sience. pp. 9465-9477. ISSN 1452-3981

A.S.A. , Hasim and Zulkifilie, Ibrahim and Hairul Nizam, Talib (2012) Comparative study of different PWM control scheme for three-phase three-wire shunt active power filter. In: IEEE International Power Engineering and Optimization Conference (PEDCO), 6-7 June 2012, Melaka, Malaysia. (Submitted)

ABDUL HALIM, RAHIMAH and YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER (2012) Design and Analysis of a New Natural Illumination Device through Lumen Method Approach. In: 3rd International Conference on Mechanical and Manufacturing Engineering , 20-21 NOVEMBER 2012, UTHM.

ABDULLAH, LOKMAN and JAMALUDIN, ZAMBERI and RAFAN, NUR AIDAWATY and YAAKOB, MOHD YUHAZRI (2012) Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system. Applied Mechanics and Materials , 229-231 (2012). pp. 750-755. ISSN 1662-7482

ABDULLAH, Mohd Azman and Jenal, Rustamreen and MICHITSUJI, Yohei and NAGAI, Masao (2012) ANALYSIS OF DYNAMIC INTERACTION BETWEEN FLEXIBLE BODY OF OVERHEAD CONTACT WIRE AND ACTIVE CONTROL PANTOGRAPH CONSIDERING VERTICAL BODY VIBRATION. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4-5, April 2012, Melaka, Malaysia.

ABDULLAH, Mohd Azman and Shaharuzaman, M.A and Jenal, Rustamreen and Boejang, Hambali and Mat Idera , I.H. and Mohd Razi, M.Z. (2012) Development of Conceptual Vehicle All-Wheel-Nuts Remover. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

AKIAH, MASNI AZIAN and HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray. In: International Conference on Advanced Material Engineering and Technology, 28-30 NOVEMBER 2012, penang.

AMAN, AMINUDIN (2012) Classification of Polymeric Insulating Surface Condition Based on Leakage Current Total Waveform Distortion. Archives Des Sciences. pp. 36-50. ISSN 1661-464X

ARSHAD, YUSRI (2012) IT OUTSOURCING DECISIONS AND IMPLEMENTATIONS IN MALAYSIAN PUBLIC HEALTHCARE SECTOR AGENCIES: GROUNDING AN ITO RELATIONSHIP MODEL USING QUALITATIVE APPROACH. PhD thesis, UNIVERSITI TEKNIKAL MALAYSIA MELAKA.

Ab Ghani, Mohd Ruddin (2012) PI Sliding Mode Control for Mismatched Uncertain Systems. Jurnal Teknologi, UTM, 2012, 36 (1). pp. 47-54. ISSN 0127-9696

Ab Ghani, Mohd Ruddin (2012) Sliding Mode Control of Active Suspension System. Jurnal Teknologi, UTM, 2012, 37 (1). pp. 1-10. ISSN 0127-9696

Ab Ghani, Mohd Ruddin and Gan, Chin Kim (2012) CONCENTRATING SOLAR POWER (CSP) IN MALAYSIA ENVIRONMENT : A REVIEW. In: Power and Energy Conversion Symposium (PECS 2012), 17th December 2012, Faculty of Electrical Engineering.

Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff and Raman, Siti Hajar and Baharudin, Zikri Abadi and Wan Jusoh, Wan Nor Shela Ezwane (2012) THE IMPLEMENTATION OF FAULT MANAGEMENT IN DISTRIBUTION SYSTEM USING DISTRIBUTION AUTOMATION SYSTEM (DAS) IN CONJUNCTION WITH SCADA. In: Power and Energy Conversion Symposium (PECS 2012), 17th December 2012, Faculty of Electrical Engineering.

Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff and Wan Jusoh, Wan Nor Shela Ezwane and Auzani , Jidin and Raman, Siti Hajar (2012) DEVELOPMENT OF REMOTE TERMINAL UNIT (RTU) FOR THE NEW FUNCTION OF DISTRIBUTION AUTOMATION SYSTEM (DAS). In: Power and Energy Conversion Symposium (PECS 2012), 17th December 2012, Faculty of Electrical Engineering.

Ab Ghani, Mohd Ruddin and Mohd Amin, Nur Huda and Kasdirin, Hyreil Anuar (2012) Stability Study of PD and PI Controllers in Multiple Difference Disturbances. In: 2012 IEEE Control and System Graduate Research Colloquium, 2011/7/16, UiTM, Shah Alam, Selangor.

Ab Ghani, Mohd Ruddin and Mohd Amin, Nur Huda and KASDIRIN , HYREIL ANUAR (2012) DEVELOPMENT OF PD CONTROLLER FOR COMPARISON STABILITY STUDY IN MULTIPLE DIFFERENCE DISTURBANCES. In: The 3rd International Conference on Engineering and ICT (ICEI 2012), 4 - 5 APRIL 2012, MELAKA, MALAYSIA.

Ab Ghani, Sharin (2012) ASSESSMENT OF TRANSFORMER CORE AND WINDING CONDITIONS FROM SFRA MEASUREMENT RESULTS USING NUMERICAL TECHNIQUES FOR TNB DISTRIBUTION TRANSFORMERS. Masters thesis, Universiti Tenaga Nasional.

Ab Ghani, Sharin and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Ahmad Khiar, Mohd Shahril and Sutan Chairul, Imran (2012) Evaluation of Transformer Core and Winding Conditions from SFRA Measurement Results using Statistical Techniques for Distribution Transformers. In: 2012 IEEE International Power Engineering and Optimization Conference (PEOCO2012), Melaka, Malaysia: 6-7 June 2012 , 6 -7 June 2012, Melaka, Malaysia .

Ab Ghani, Sharin and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Sutan Chairul, Imran and Ahmad Khiar, Mohd Shahril (2012) MECHANICAL CONDITION ASSESSMENT OF TNB IN-SERVICE DISTRIBUTION TRANSFORMERS USING SWEEP FREQUENCY RESPONSE ANALYSIS (SFRA). In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Ab Maulod, Hairul Effendy and Yaakub, Juliana and Yaakob, Mohd Yuhazri and Samsudin, Abdul Rahim and Mohamad, Noraiham (2012) Preliminary study of CFRP manufacturing offcuts with secondary resin impregnation via hand lay up. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka. (Submitted)

Ab Rahman, Mohd Fauzi and Kok, Swee Leong (2012) Investigation of useful ambient vibration sources for the application of energy harvesting. In: 2011 IEEE Student Conference on Research and Development, 19-20 December 2011, Cyberjaya. (Submitted)

Ab Rashid, Mohd Zamzuri and Mohd Aras, Mohd Shahrieel and Mohamed Kassim, Anuar and Ibrahim, Zulkifilie and Annisa , Jamali (2012) Dynamic Mathematical Modeling and Simulation Study of Small Scale Autonomous Hovercraft. International Journal of Advanced Science and Technology, 46. pp. 95-114. ISSN 2005-4238

Ab Rashid, Mohd Zamzuri and Mohd Aras, Mohd Shahrieel and Mohd Shah, Hairol Nizam and Lim , Wee Teck and Ibrahim, Zulkifilie (2012) Design and System Parameter’s Validation of the Unicycle Mobile Robot. In: First International Conference on Control, Automation and Information Sciences (ICCAIS 2012), November 26-29, 2012, Grand Hotel Saigon, ho chi minh vietnam.

Ab. Aziz, Norazlina and Abdul Majid, Izaidin and Md. Nordin, Shahrina and Lai, Fong Woon and Kamaludin, Muhamad Hasfarizal (2012) Analyzing Market Exploitation and Market Exploration Dyad for Marketing Strategy Implementation Effectiveness in Malaysian Fertilizer Industry: A Conceptual Paper. In: The 2nd Global Conference for Academic Research on Management and Economics, 18-19 December 2012, Grand Season Hotel Kuala Lumpur.

Ab. Aziz, Norazlina and Abdul Majid, Izaidin (2012) The Impact of Human Resource Management (HRM) on Performance in Public Sector. In: International Conference on Technology Management and Technopreneurship (IC-TMT 2012), , 6-7 February 2012, Convention Hall City Campus UTeM, Melaka.

Ab. Aziz, Norazlina and Abdul Majid, Izaidin and Md. Saad, Mohd Shamsuri and Md. Nordin, Shahrina and Lai, Fong Woon (2012) An Examination of Marketing Strategies on Financial Performance within the Context of the Fertilizer Industry in Malaysia: A Conceptual Framework. In: International Conference on Management and Social Sciences and Humanities (ICMeSH), 12-14 June 2012, KLCC Kuala Lumpur.

Abadi, Mesiran (2012) Investigation Of Soil Resistivity Base On Design Of An Experiment Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abas, Norafizah and Ari, Legowo and Ibrahim, Zulkifilie and Anuar , Mohamed Kassim and Rahim, Nor Hidayah (2012) Modeling and System Identification using Extended Kalman Filter for a Quadrotor System. In: 2012 2nd International Conference on Electrical Engineering and Applications , 15-16 Dec 2012, Bali.

Abbas, Adnan Jameel and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Optimization of Machining Parameters in Turning Operation Using PSO and AIS Algorithms: A Survey. Scottish Journal of Arts, Social Sciences and Scientific Studies , 7 (1). ISSN ISSN 2047-1278

Abbas, Adnan Jameel and Minhat, Mohamad and Abdul Rahman, Md. Nizam Bin and Akbar, Habibullah (2012) Future prospects of turning processes optimization using metaheuristics methods. In: International Conference on Uncertainty Reasoning and Knowledge Engineering ICURKE 2012, 14-15 Aug. 2012, Jakarta, Indonesia.

Abd Azis, Fadilah and Mohd Aras , Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Othman, Muhammad Nur and Abdullah, Shahrum Shah (2012) Problem Identification for Underwater Remotely Operated Vehicle(ROV): A Case Study. Procedia Engineering , 41 (2012). pp. 554-560. ISSN 1877-7058

Abd Aziz, Mohamad Azlan (2012) The effectiveness of marketing tools in student admission in higher education institutes in Malaysia. Masters thesis, UTeM.

Abd Latif, M.J. and Jin, Z. and Wilcox, R.K. (2012) Biomechanical characterisation of ovine spinal facet joint cartilage. Journal of Biomechanics, 45. pp. 1346-1352. ISSN 0021-9290

Abd Manaf, Mohd Edeerozey (2012) Material design of retardation films with extraordinary wavelength dispersion of orientation birefringence: a review. Cellulose, 19. pp. 601-613. ISSN 1572-882X

Abd Manap, Nurulfajar (2012) Multi-view Image Synthesis Techniques for 3D Vision and Free-viewpoint Applications. PhD thesis, University of Strathclyde, United Kingdom.

Abd Manap, Nurulfajar and Mat Ibrahim, Masrullizam (2012) Real Time Door Access Event Detection and Notification in a Reactive Smart Surveillance System. In: Image and Signal Processing. 0302-9743, 7340 . Springer Berlin Heidelberg, Berlin, pp. 459-467. ISBN 978-3-642-31254-0

Abd Manap, Nurulfajar and Soraghan, John J. (2012) Disparity Refinement Based on Depth Image Layers Separation for Stereo Matching Algorithms. Journal of Telecommunication Electronic and Computer Engineering, 4 (1). pp. 51-64.

Abd Rahman, Md Nizam and Abdullah, Rohana (2012) Work Study Techniques Evaluation at Back-End Semiconductor Manufacturing. In: International Conference on Design and Concurrent Engineering, 15-16 Oct 2012, Equatorial Hotel, Melaka.

Abd Rami, Ainun Zuhairah (2012) Development Of Automatic Vibration Prediction System Of Robotic Arm Structure By Using Analysis Of ANSYS. Project Report. UTeM, Melaka. (Submitted)

Abd. Rahman, Md. Nizam and Abdullah, Rohana (2012) WORK STUDY TECHNIQUES EVALUATION AT BACK-END SEMICONDUCTOR MANUFACTURING. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mohd Zamberi, Mahanum and Rody, M. Z. M and Mat Kamal, Sushella Edayu (2012) Tribology-Related Researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM). In: Malaysia-Japan Tribology Meeting 2012, 27-28 August 2012, Kuala Lumpur.

Abdollah, Mohd Fadzli bin (2012) Deformation–wear transition map of DLC coating under cyclic impactloading. Wear, 27 (-). pp. 435-441. ISSN 0043-1648

Abdollah, Mohd Fadzli bin (2012) Future developments of a deformation-wear transition map of DLC coating. Tribology Online, 7 (3). pp. 107-111. ISSN 1881-2198

Abdul Hafiz, Abd. Halin (2012) Performance Analysis Of Zigbee-Based Wireless Viral Advertisement System For Land Public Transport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Mohd Tamezer (2012) Optical Soliton In Long Haul Telecommunications With Fiber Loss Factor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Jamal (2012) Rekabentuk Dan Fabrikasi Struktur Dadan Mobiliti Pengangkutan Peribadi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mohd Mustaffa (2012) Stability Control For Quadcopter With An Autonomous Flight System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Mustafa (2012) Smart Automatic Dual Function Lawn Mower With Infrared And Metal Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jabbar, Aseran (2012) UTeM MPP Voting System Using SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Karim, Kasrul and Othman, Md Nazri and Abdullah, Abdul Rahim and Ramli, Mohd zulkifli and Jidin , Auzani (2012) A CONVERSION OF ICE SYSTEM INTO ELECTRIC VEHICLE. In: Power and Energy Conversion Symposium (PECS 2012), 17 December 2013, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.

Abdul Khalid, Fararishah and Yahya, Salleh (2012) Managing Technology Incubators : Keys Elements In Transforming New Ventures To Growing Companies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Khalid, Fararishah (2012) Investigating The Underlying Components in Business Incubation Process in Malaysian ICT Incubators. Asian Journal of Social Sciences and Humanities, 1 (1). pp. 88-102. ISSN 2186-8484

Abdul Khalid, Fararishah and Gilbert, David and Huq, Afreen (2012) Third-generation Business Incubation Practices in Malaysian ICT Incubators - A Bridge Too Far? American Journal of Management. pp. 88-107. ISSN 21657998

Abdul Latip, Shekh Faisal (2012) Fault Analysis of the KATAN Family of Block Ciphers. In: Information Security Practice and Experience 2012 (ISPEC 2012), 9 - 12 April 2012, Hangzhou, China.

Abdul Majid, Izaidin and ALI AL-SHAMI, SYED SAMER and RASHID, NURULIZWA and ABDUL RASHID, FASASI (2012) Inter-Firm Knowledge Transfer to the Capability of Local Parts Firms in the Malaysian Automobile Industry. In: National Research & Innovation Conference for Graduate Students in Social Sciences , 7th - 9th December 2012, Mahkota Hotel, Melaka.

Abdul Majid, Izaidin and Al-Syahmi, Syed Samer Ali and Rashid, Nurulizwa and Abdul Rashid, Fasasi (2012) Inter-Firm Knowledge Transfer to the Capability of Local Parts Firms in the Malaysian Automobile Industry. European Journal of Business and Management. pp. 1-8. ISSN ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online)

Abdul Majid, Izaidin and Abdul Latiff, Roziah (2012) TECHNOLOGY ENTREPRENEURSHIP AND COMMERCIALIZATION: CUSTOMER ACCEPTANCE OF BIOMEDICAL CALIBRATION LAB ISO 17025. In: International Conference on Technology Management and Technopreneurship (IC-TMT 2012), 6-7 Feb 2012, Convention Hall City Campus UTeM.

Abdul Majid, Izaidin and Dora, Mohd Taib and Abdul Razak, Muhammad Hafiz and Abdul Wahab, Noor Akmal (2012) Measuring the Organizational Innovation Impact towards the Performance of SME’s in Malaysia. In: International Conference on Technology Management and Technopreneurship (IC-TMT 2012), 6-7 Feb 2012, Convention Hall City Campus UTeM, Melaka.

Abdul Majid, Izaidin and Ismail, Kamariah and Tengku Azhar, T. N. and Yong, C. Y. and Aslan, A. S. and Wan Omar, Wan Zaidi (2012) Problems on Commercialization of Genetically Modified Crops in Malaysia. In: (ELSEVIER) The 2012 International Spring Conference on Asia Pacific Business Innovation & Technology Management , 13-15 Jan 2012, JomTien PalmBeach (Hotel & Resort), Pattaya, Thailand.

Abdul Majid, Izaidin and Ismail, kamariah and tengku Azhar, T. N. and Yong, C. Y. and Aslan , A. S. and Omar, W. Z. and Ajagbe, M. (2012) Problems on Commercialization of Genetically Modified Crops in Malaysia. Journal of Social and Behaviorial Sciences. pp. 353-357. ISSN 40 ( 2012 ) 353 – 357

Abdul Majid, Izaidin and Jehan Zeb Khan, Bakht Zamin Khan (2012) The Role of Network Relationship Quality Played In the International Expansion of SMEs. Interdisciplinary Journal of Research in Business. pp. 1-13. ISSN ISSN: 2046-7141

Abdul Majid, Izaidin and Kamaludin, Muhamad Hasfarizal and Md. Saad, Mohd Shamsuri (2012) The Impact of Strategic and Competitive Posture of Malaysian Small and Medium-sized Enterprises (SMEs) on Organizational Innovation: A preliminary report. In: International Conference on Technology Management and Technopreneu, 6&7 Feb 2012, UTeM City Campus Melaka.

Abdul Majid, Izaidin and Kamaludin, Muhammad Hasfarizal and Md. Saad, Mohd. Shamsuri (2012) The Impact of Strategic and Competitive Posture of Malaysian Small and Medium-sized Enterprises (SMEs) on Organizational Innovation: A preliminary report. In: International Conference on Technology Management and Technopreneurship (IC-TMT 2012), 6-7 Feb 2012, ), Convention Hall City Campus UTeM, Melaka.

Abdul Majid, Izaidin and Koe, Wei Loon (2012) Sustainable Entrepreneurship (SE): A Revised Model Based on Triple Bottom Line (TBL). International Journal of Academic Research in Business and Social Sciences June 2012, Vol. 2, No. 6 ISSN: . pp. 2222-6990. ISSN 2222-6990

Abdul Majid, Izaidin and Koe, Wei Loon and Ismail, Kamariah and Sa'ari, Juan Rizal (2012) Determinants of Entrepreneurial Intention Among Millennial Generation. Journal of Social and Behavioral Sciences . pp. 197-208. ISSN 40 ( 2012 ) 197 – 208

Abdul Majid, Izaidin and Koe, Wei Loon and Ismail, Kamariah and Sa'ari, Juan Rizal (2012) Intention of Small and Medium Enterprises (SMEs) Owners towards Sustainable Entrepreneurship. In: The 2012 International Spring Conference on Asia Pacific Business Innovation and Technology Management, 13-15 Jan 2012, Pattaya Tahiland.

Abdul Majid, Izaidin and Ngadiman, M. Y. and Hussin, B. (2012) A STUDY OF TOTAL PRODUCTIVE MAINTENANCE IMPLEMENTATION IN MANUFACTURING INDUSTRY FOR GENERATING GREATER PROFITS. In: International Conference of Technology Management, Business and Enterpreneurship (ICTMBE2012) , 18-19 Dec 2012, Renaissance Hotel Melaka. .

Abdul Majid, Izaidin and Sa'ari, Juan Rizal and Koe, Wei Loon (2012) Determinants of Entrepreneurial Intention Among Millennial Generation. In: (ELSEVIER) The 2012 International Spring Conference on Asia Pacific Business Innovation & Technology Management , 13-15 Jan 2012, JomTien PalmBeach (Hotel & Resort), Pattaya, Thailand .

Abdul Majid , Izaidin and Hussein Al-Shami , 11) Syed Samer Ali and Rashid, Nurulizwa and Abdul Rashid, Fasasi (2012) Inter-Firm Knowledge Transfer to the Capability of Local Parts Firms in the Malaysian Automobile Industry. In: International Conference on Technology Management and Technopreneurship (IC-TMT 2012), 6-7 Feb 2012, Convention Hall City Campus UTeM, Melaka.

Abdul Majid , Izaidin and Kamaludin, Muhammad Hasfarizal and Md.Saad, Mohd Shamsuri and Ab. Aziz, Norazlina (2012) Sustainability – Driven Entrepreneurship: The Mediating Effect of Opportunity-Based Management Structure on the Relationship between Entrepreneurial Orientation and Environmental Sustainability Management of SMEs: A Conceptual Framework. European Journal of Business and Management . pp. 2222-2839. ISSN ISSN 2222-1905 (Paper) ISSN 2222-2839 (Online)

Abdul Mu'in, Haz'zaid (2012) Modelling And Study Of Femur Bone Under Normal loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rafeq, Saleman and Musthafah, Mohd Tahir and Mohd Azman, Abdullah and Mohd Juzaila, Abd. Latif and Muhammad Zahir, Hassan and Syahibudil lkhwan, Abdul Kudus and Muhd Ridzuan, Mansor and Fudhail, Abd Munir (2012) Design And Fabrication Of A Race Car Vehicle For UTeM Formula Varsity 2012. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Raheed, Fasasi (2012) A study on the contribution of supply chain management to Ghana's rice industry. Masters thesis, UTeM.

Abdul Rahman, Abdul Ghani (2012) Comparison On Data Driven Algorithms To Maintain Color Constancy In Industrial Camera For High Intensity Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Jalil (2012) Merekabentuk Dan Menganalisis Kipas Penghembus Kenderaan Penumpang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Rashidi Arash (2012) Business strategy toward wealth creation. Masters thesis, UTeM.

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei, Masami (2012) Current Achievement and Future Plan for Improvement for E Cutter Development. In: The 24th Symposium on Electromagnetics and Dynamics, SEAD 24, 16 - 18 May 2012, Toyama, Japan.

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei, Masami (2012) Evaluation of Various Permanent Magnet Arrangements on Linear Actuator. In: Asia-Pacific Symposium on Applied Electromagnetics and Mechanics 2012, 25 – 27 July 2012, Ho Chi Minh City, Vietnam.

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei, Tashiro (2012) Initial Progress and Possible Improvement of E-Cutter Linear Actuator Development. In: 2012 IEEE International Conference on Power and Energy (PECon 2012), 2 – 5 December 2012, Kota Kinabalu, Sabah, Malaysia.

Abdul Talib, Din and Mohd Yazid, Othman and Mohd Yuhazri, Yaakob (2012) The Design And Development Of Water Wheel For Power Generation At UTeM's Main Campus Recreational Lake. Project Report. UTeM. (Submitted)

Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing and Sulong, Muhammad Suhaizan (2012) Constructing a Development Methodology for Web-based Information Systems with Information Quality. In: 18th International Business Information Management Conference, 9-10 May 2012, Istanbul, Turkey.

Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing and Sulong, Muhammad Suhaizan (2012) A Methodology for the Development of Web-based Information Systems: Web Development Team Perspective. In: 18th Americas Conference on Information Systems (AMCIS), 9-11 August 2012, Seattle, Washington.

Abdul-Aziz, Azlianor and Koronios, Andy and Gao, Jing and Sulong, Muhammad Suhaizan (2012) Towards Effective Development of Web-based Business Applications. Journal of Internet and e-Business Studies. pp. 1-13. ISSN 2169-0391

Abdullah, Abdul Rahim and Sha'ameri, Ahmad Zuri and Mohd Said, Nurul Ain and Mohd Saad, Norhashimah and Jidin, Auzani (2012) Bilinear Time-Frequency Analysis Techniques for Power Quality Signals. In: International MultiConference of Engineers and Computer Scientists 2012 (IMECS 2012)., 14-16 March 2012, hong kong.

Abdullah, Lokman and Jamaludin, Zamberi and Chiew, Tsung Heng and RAFAN, NUR AIDAWATY (2012) Systematic Method for Cutting Forces Characterization for XY Milling Table Ballscrew Drive System. International Journal of Mechanical & Mechatronics Engineering IJMME, 12 (1). pp. 28-33. ISSN 2077-124X

Abdullah, Lokman and Jamaludin, Zamberi and Rafan, Nuraidawaty and Chiew, Tsung Heng (2012) Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system. Applied Mechanics and Materials, 229-231 (2012). pp. 750-755. ISSN 1660-9336

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and M.Y, YUHAZRI (2012) Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system. Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system , 229-231. pp. 750-755. ISSN 16609336

Abdullah, Muhammad Radzie (2012) Mengkaji Daya Seretan (Drag Force) Terhadap Rak Bumbung (Roof Box) Kereta Bersaiz Kompak Dengan Menggunakan Kaedah Eksperimen (Terowong Angin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Shahrum and Zakaria, Kamarul Ariffin and Ghazali, Mariyam Jameelah (2012) Observation of the fatigue crack propagation rate of an aluminum alloy specimen under fatigue spectrum loadings. Materials Testing, 54 (10). pp. 663-673. ISSN ISSN 0025-5300

Abdullah, Abdul Rahim and NORDDIN, NURBAHIRAH and Zainal Abidin, Nur Qamarina and Aman, Aminudin and JOPRI, MOHD HATTA (2012) Leakage current analysis on polymeric and non-polymeric insulating materials using time-frequency distribution. In: 2012 IEEE International Conference on Power and Energy (PECon), 2 December 2012, Kota Kinabalu, Sabah.

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and syed mohamed, muhammad syafiq (2012) System Identification of XY Table ballscrew drive using parametric and non parametric frequency domain estimation via deterministic approach. Procedia Engineering , 41. pp. 567-574. ISSN 1877-7058

Abdullah, Mohd Azman and Mansor, Muhd Ridzuan and Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Hassan, Muhammad Zahir and Ngadiman, Mad Nasir (2012) Design, Analysis and Fabrication of Chassis Frame for UTeM Formula VarsityTM Race Car. In: International Conference on Manufacturing and Industrial Engineering (ICMIE’12) Dec. 29-30, 2012, Kuala Lumpur (Malaysia), 29 - 30 December 2012, Grand Seasons Hotel, Kuala Lumpur.

Abdullah, Rohana and Abd Rahman, Md Nizam (2012) An Integrated Architecture for Lean Waste Analysis. In: 2012 IEEE International Conference on Industrial Engineering and Engineering Management, 10-13 Dec 2012, Hong Kong Convention and Exhibition Centre.

Abu, Maisarah (2012) PRINTED DIPOLE ANTENNA WITH ARTIFICIAL MAGNETIC CONDUCTOR GROUND PLANE. In: Antenna and Applied Electromagnetic Application. Penerbit UTM, pp. 1-11. ISBN ISBN 978-983-52-0827-0

Abu, Maisarah and A. Rahim, Mohamad Kamal (2012) Single-band Zigzag Dipole Artificial Magnetic Conductor. Jurnal Teknologi, UTM. pp. 19-25. ISSN 0127-9696

Abu, Maisarah and A. Rahim, Mohamad Kamal (2012) Single-band and Dual-band Artificial Magnetic Conductor Ground Planes for Multi-band Dipole Antenna. Radio Engineering Journal, 21 (4). pp. 999-1006. ISSN ISSN 1210-2512

Abu Bakar, Muhamad Najmi (2012) A Study On TNB Load Reading Prediction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Norazhar and Md Nawawi, Mohamad Riduwan and Abdullah, Abdul Rahim and Noordin, Aminurrashid (2012) Malaysian Vehicle License Plate Recognition Using Double Edge Detection. In: IEEE International Conference on Control System, Computing and Engineering, 23-25 November 2012, Penang .

Abu Bakar, Abu Bakar and Othman, Abdul Rani and Husain, Mohd Nor and Johal, Mohammad Syahrir and Hamidon, Jsam (2012) The Cascode and Cascaded Techniques LNA at 5.8GHz Using T-Matching Network for WiMAX Applications. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4-6 April 2012, Melaka.

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Nadia and Mohammad Raffi, Nurul Fatin (2012) Finite Element Model of Machining with High Pressure Coolant for Ti-6Al-4V alloy. Proceedings of Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012. pp. 295-300. ISSN 978-967-5415-49-4

Abu Bakar, Norazhar and Md Nawawi, Mohamad Riduwan and Abdullah, Abdul Rahim and Noordin, Aminurrashid and Musa, Zainolizam and Xian, Oon Cee (2012) Malaysian Vehicle License Plate Recognition Using Double Edge Detection. In: IEEE International Conference on Control System, Computing and Engineering (ICCSCE), 2012 , 23-25 Nov 2012, Penang.

Abu Firaz, Shamshul Kamal (2012) Simple Mobile Ordering System For Restaurant Within Wi-Fi Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Samah, Khyrina Airin Fariza and Hussin, Burairah and Hasan Basari, Abd Samad (2012) A Systems Thinking in Natural Disaster Management: Evacuation Preparedness. Proceedings of the 1st WSEAS International Conference on Risk Management, Assessment and Mitigation (RIMA '12) . pp. 384-389. ISSN 2227-460X

Abugharsa, Ahmed Bashir and Basari, A. S. H. and almangush, hamida (2012) A Novel Image Encryption using an Integration Technique of Blocks Rotation based on the Magic cube and the AES Algorithm. International Journal of Computer Science Issues , 9, issue 4 (1). pp. 41-47. ISSN 1694-0814

Adeline, Lukar Herlino (2012) An optimal Adaptive Traffic Signal Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Adli, Bahtiar Affandi (2012) Analizing Induction Motor Variables (Voltage Angular Velocity, And Efficiency) To Compare Between Nelder-Mead Method And Powell’s Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adi Alif, Azim Ng (2012) Design, Development, And Fabrication Of Urinal Health Checking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Hassan and Raja Rahman, Raja Roslan and Husain, Kalthom and Zainuddin, Mohamad Zahir (2012) The Importance of Total Quality Management and Leadership Communication to Enhance Islamic Quality at Malaysian Civil Service. Scottish Journal of Arts, Social Sciences and Scientific Studies (67). p. 6787. ISSN 2047 - 1278

Adnan, Tawafan and Marizan, Sulaiman and Zulkifilie, Ibrahim (2012) Detection of high impedance faul on power distribution system using probabilistic neural network. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Afidatul Nadia, Mok Hat (2012) Simulation Of Worldwide Interoperability For Microwave Access (WiMAX) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afisha, Yahya (2012) RFID Based Medical Database System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, I. and Jaafar, Azizah and Mohd Kamil, Mohd Hafiz Faizal (2012) The research on usability testing for users' emotion using game design. In: Visual Informatics International Seminar 2012 (VIIS'2012), 12- 13 December 2012, UKM, Bangi, Selangor.

Ahmad, Rabiah and Yunos, Zahari (2012) The Application of Mixed Method in Developing a Cyber Terrorism Framework. Journal of Information Security, 2012,. (In Press)

Ahmad, Arfah and Anwar Apandi, Nur Ilyana and Hashim, Mohd. Ruzaini and Md Sani, Zamani (2012) A Study On Students Interest And Preparedness Based On Entry Survey. In: 2012 International Conference and Statistics in Science, Bussiness and Engineering, 10-12 September 2012, Awana Porto Malai Hotel, Langkawi Kedah.

Ahmad, Ibrahim and Jaafar, Azizah (2012) Computer games: implementation into teaching and learning. Procedia - Social and Behavioral Sciences, Volume. pp. 515-519. ISSN 1877-0428

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Cooray, Vernon and Dutkiewicz, Eryk (2012) Performance Analysis of Audio Streaming over Lightning-interfered MIMO Channels. In: International Symposium on Communications and Information Technologies (ISCIT), 2-5 October 2012, Gold Coast, Australia. (In Press)

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Hettiarachchi, Pasan and Cooray, Vernon (2012) Preliminary Observations of Lightning Signature At 2400 MHz in Sweden Thunderstorm. In: Asia-Pacific Conference on Applied Electromagnetics, 11-13 December 2012, Melaka, Malaysia. (In Press)

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Rahman, Mahbubur and Cooray, Vernon (2012) Measurement of Bit Error Rate at 2.4 GHz Due to Lightning Interference. In: International Conference on Lightning Protection (ICLP), 1-6 September 2012, Vienna, Austria. (In Press)

Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Rahman, Mahbubur and Cooray, Vernon and Dutkiewicz, Eryk (2012) Lightning Interference in Multiple Antennas Wireless Communication Systems. Journal of Lightning Research, 4. pp. 162-172. ISSN 1652-8034 (In Press)

Ahmad, NurulHuda and Kamat, Seri Rahayu (2012) CAR ACCIDENTS ANALYSIS THROUGH VIRTUAL WINDOW INTERFACE. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

Ahmad, Rabiah (2012) An Integrated Approach in Risk Management Process for Identifying Information Security Threats using Medical Research Design. Journal of Information Assurance and Security. ISSN 1554-1010

Ahmad, S. and Kasmuri, E. and Muda, N. A. and Muda, A. K. (2012) Learning through practice via role-playing: Lessons learnt. In: EDULEARN12, 2-4 July 2012, Barcelona, Spain.

Ahmad, S. and Muda, N. A. and Muda, A. K. and Othman, Z. (2012) Requirements Negotiation: Does Consensus Reduce Software Development Cost? JDCTA: International Journal of Digital Content Technology and its Applications, 6 (22). pp. 46-55. ISSN 2233-9310 (Online)

Ahmad , Rabiah (2012) Perception on Cyber Terrorism: A Focus Group Discussion Approach. Journal of Information Security, 2012, 3. pp. 231-237. ISSN 2153-1234

Ahmad Afiq, Hassan (2012) Controlling Variables Data By Using The First-Order Model Of Response Surface Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Farid, Sapar (2012) Development of Energy Audit Software For Lighting Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faris Firdaus, Mohd Zahidi (2012) Detection Of Winding Deformation In TNB Distribution In Service Transformer Using Cross Correlation Co-Efficient Analysis Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Ibrahim (2012) Solar Power Backup For Heavy Duty Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hakimie, Othman (2012) Sport Training System With Android Based Applications Using Wireless Connectivity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Hiedzuanuddin , Ahmad Khidir (2012) Design Low Noise Amplifier With Ultrawideband Frequency. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Khiar, Mohd Shahril and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Ab Ghani, Sharin and Sutan Chairul, Imran (2012) Condition Assessment of OLTC Using Duval Triangle and Static Winding Resistance Test. In: 2012 IEEE International Power Engineering and Optimization Conference (PEOCO 2012), 6-7 June 2012, Melaka, Malaysia.

Ahmad Khiar, Mohd Shahril and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Ab Ghani, Sharin and Sutan Chairul, Imran (2012) DIAGNOSIS OF OLTC USING DGA AND STATIC WINDING RESISTANCE TEST. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Ahmad Nordin , Mohd Shaifudin (2012) Performance Analysis Of Point To Point Communication For Land Public Transport Via Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridhan, Ramli (2012) Simulation Developement Of Step Down DC Converter Based On Multicell Topology Using PSIM 9. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rozelan, Yunus (2012) BAGAIMANA MENGHADAPI TEKANAN DI TEMPAT KERJA. UNSPECIFIED.

Ahmad Rozelan, Yunus and Amir, Aris (2012) ENGINEERING STUDENTS PERSON-ENVIRONMENT FIT: A COMPARISON STUDY OF TWO PUBLIC HIGHER LEARNING INSTITUTION IN MALAYSIA. In: EDULEARN12. 4th International Conference on Education and New Learning Technologies. International Association of Technology, Education and Development (IATED), 2 - 4th july 2012, Barcelona, Spain.

Ahmad Rozelan, Yunus and Amir , Aris and Rusnani, Abdul Kadir (2012) Keselarasan personaliti-persekitaran, keakuran terhadap ibu bapa dan pencapaian akademik pelajar sebuah IPTA di Malaysia. In: LICER 2012 Labuan International Conference on Educational Research 2012, 5 - 7th July 2012, Labuan, Malaysia. (Unpublished)

Ahmad Rozelan, Yunus and Amir Aris, and Syed Najmuddin Syed Hassan, (2012) Entrepreneurship Students Person-Environment Fit: A Study Of Two Public Higher Learning Institution In Malaysia. In: @nd Sout East Asia Psychology Conference, 26-28 September 2012, Kota Kinabalu.

Ahmad Rozelan , Yunus and Amir, Aris and Wan Walada Faiqah, Maulud and Adi, Fahrudin (2012) ORGANIZATION CRISIS INTERVENTION: INCORPORATING A COUNSELING STRATEGY. In: IC-TMT 2012 International Conference on Technology Management and Technopreneurship 2012 , 6-7th February 2012, Melaka, Malaysia. (Unpublished)

Ahmad Syahir, Sulaiman (2012) Analisis Daya Seret (Drag Force) Terhadap Rak Bumbung Kereta Kompak Dengan Menggunakan Kaedah Simulasi Dinamik CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syauqi, Ahmad Shukri (2012) Natural Convective Heat Transfer In Square Enclosures Heated From Below. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syazni, Ahmad Akmar (2012) Effect Of Heat Treatment On Impact Strength Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusoff, Hassan (2012) The 3rd International Conference On Engineering 2012 ICT. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Closing Ceremony Of The 3rd International Conference On Engineering 2012 ICT. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Closing Ceremony Of The UTeM Graduate Leadership Assessment And Development (UTeM GLAD). [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) International Conference On Active Learning 2012 And International Conference On Mobile Learning Application And Services 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) International Conference On Design And Concurrent Engineering (IDECON 2012). [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Anugerah Akademik Universiti 2011. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Dialog Pemimpin Mahasiswa UTeM Bersama Pengurusan Universiti. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Iftar Bersama Tun Datuk Seri Utama Mohd Khalil Bin Yaakob Canselor UTeM. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Konvokesyen Universiti Teknikal Malaysia Melaka Ke-8. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Makan Malam Bersempena Mesyuarat TNC-TNC/ Timb. Rektor/ Pen. NC (Hal Ehwal Pelajar & Alumni) IPTA Ke 178 Bil.1/ 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Menandatangani MOU Diantara UTeM Holdings Dengan DMFK Inspiration & Maesco. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Menandatangani MoU : UTeM-Silterra & MoA : UTeM-AMR Intellisys. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Penutup Formula Varsity 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Penutup Temasya Olahraga Kali Ke-5 UTeM 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Penutup UTeMEX 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Penyerahan Watikah Pelantikan Majlis Perwakilan Pelajar (MPP) 2012-2013. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Perasmian UTeMEX 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Perutusan Naib Canselor UTeM 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Ramah Mesra Bersama Menteri Mentor Dan Penyerahan Kad Diskaun Siswa 1Malaysia. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Sambutan Eidulfitri 1433H. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Sambutan Hari Raya GAKUM 1433H. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Majlis Sambutan Maulidur Rasul 1433H. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Perasmian Majlis Minggu Haluan Siswa UTeM Sesi 2012-2013. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Persidangan Pembangunan Dan Pengurusan Fasiliti Kampus Pendidikan 2012. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2012) Program Pertandingan Debat Piala Naib Canselor UTeM 2012 Antara Fakulti Dan Kolej Kediaman. [NC Speech] (Submitted)

Ahmad Zakuan, Ahmad Dahalan (2012) Analysis Of Lightning-Caused Ferroresonance In Capacitor Voltage Transformer (CVT) Using Harmonic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zawawi, Jamal (2012) Service quality in general insurance industry. Masters thesis, UTeM.

Aiman Arrif, Ahamad Tarmizi (2012) Design And Fabricate A Brake System And Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al Amin, Mohamed Sultan and Mohd Warikh, Abd Rashid and Sivarao, Subramonian (2012) Design and Development of Circular Work Clamping System for Non-Contact Machining Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Amani, Umar (2012) Sintering and Characterization of Rare Earth Doped Bismuth Titanate Ceramics Prepared by Soft Combustion Synthesis. In: Sintering of Ceramics - New Emerging Techniques. InTech, pp. 357-378.

Al-Amani, Umar (2012) CURRENT PROGRESS IN SYNTHESIS AND PROPERTIES OF DOPED BISMUTH TITANATE FOR ADVANCED ELECTRONIC APPLICATIONS. In: Bismuth: Characteristics, Production and Application. Nova Science .

Al-Amani, Umar (2012) High Gain and High Directive of Antenna Arrays Utilizing Dielectric Layer on Bismuth Titanate Ceramics. International Journal of Antennas and Propagation. pp. 1-8. ISSN 10.1155/2012/375751

Al-Amani, Umar (2012) Integration of Miniaturized Array Antenna With High-Permittivity Rectangular Bismuth Titanate for WiMAX Applications. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION. pp. 6032-6036. ISSN 0018-926X

Al-Amani, Umar (2012) Single Step Combustion Synthesis to Prepare Bismuth Titanate for Potential Apllications. In: International Conference on X-Rays & Related Techniques in Research & Industry 2012, 3 - 5 July 2012, Vistana Hotel, Penang.

Al-Amani, Umar (2012) Single step combustion synthesis to prepare La doped-Bi4Ti3O12 bulk ceramics and some its characterization. In: The 8th Asian Meeting on Electroceramics (AMEC-8), 1st July to 5th July, 2012, Shangri-La’s Rasa Sayang Resort and Spa, Penang, Malaysia.

Al-Amani, Umar (2012) Soft Combustion Technique: Solution Combustion Synthesis and Low-Temperature Combustion Synthesis; to Prepare Bi4Ti3O12 Powders and Bulk Ceramics. Science of Sintering, 44. pp. 211-221. ISSN 519.718:661.887

Al-Amani, Umar (2012) Synthesis and Properties of Nd-doped Bi4Ti3O12 using the soft combustion technique. In: Bismuth: Characteristics, Production and Applications. Nova Science.

Al-Amani, Umar and Srimala , Sreekantan and Ahmad Fauzi , Mohd Noor and Khairunisak , Abd Razak and Satoshi , Tanaka and Keizo , Uematsu (2012) Structural and electrical properties of lanthanide substituted-bismuth titanate prepared by low-temperature combustion synthesis. Structural and Electrical Properties of Lanthanide substituted-Bismuth Titanate Prepared by Low-Temperature Combustion Synthesis, 545. pp. 279-284. ISSN 10.4028/www.scientific.net/AMR.545

Alam, Syed Shah and Janor, hawati and Jano, Zanariah and Che Wel, Che Aniza and Ahsan, Nilufar (2012) Is Religiosity an Important Factor in influencing the intention to undertake Islamic Home Financing in the Klang Valley? World Applied Sciences Journal, 19 (7). pp. 1030-1041. ISSN 1818-4952

Ali, Mohd Basri (2012) Investigation of Energy Absorbed from an Instrumented Charpy Impact on Automotive Specimens. Applied Mechanics and Materials. ISSN 1660-9336

Ali Ilman, Abdullah (2012) Study Of Optimizing HX1 Car Air Conditioning Heat Exchanger By Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aman, Aminudin (2012) Review on Partial Discharge Detection Techniques Related to High Voltage Power Equipment Using Different Sensors. Archives Des Sciences. pp. 659-676. ISSN 1661-464X

Aman, Aminudin and Abdullah, Abdul Rahim (2012) Dielectric Property of Waste Tire Dust-Polypropylene (WTD-PP) Composite For High Voltage Outdoor Insulation Application. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Aman, Aminudin (2012) Optimization of Dielectric Strength of Polymeric Composite Insulation Using Response Surface Methodology. In: International Conference on Power System Technology, 31 Oct - 2 Nov 2012, Auckland New Zealand.

Aminatul Munauwarah, Yahaya (2012) Wireless Alert System For Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminurrashid , Noordin and Mohd Azli , Salim and Mohd Razali , Mohamad Sapiee and Sulaiman , Sabikan and Mohd Hanif , Che Hasan and Zamani, Md Sani and M.H., Othman (2012) Development of a quadruped crawling robot prototype. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Amir, Aris and Ahmad Rozelan, Yunus (2012) TRANSFORM: A MODEL OF FELDA YOUTH LEADERSHIP DEVELOPMENT. In: EDULEARN12. 4th International Conference on Education and New Learning Technologies. International Association of Technology, Education and Development (IATED), 2 - 4th July 2012, Barcelona, Spain.

Amir, Aris and Ahmad Rozelan, Yunus and Azizah, Shaaban and Janatul Islah, Mohammad (2012) Entrepreneurial Potential: An Exploratory Study Of A Community In Johor. In: 2nd South East Asia Psychology Conference, 26-28 September 2012, Kota KLinabalu.

Amira, Sahari (2012) Time Study Method Implementation At Jecmetal Industries Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiruddin, Omar (2012) A Study Of Maintenance Design System For Industrial Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Aizat , Mohd Razali (2012) Hybrid Learning Control Schemes With Input Shaping Of A Flexible Manipulator System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Akmal, Abd Rahman (2012) Investigation On The Effect Of Transient Overvoltage On Electrical Cable. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amrullah Firdaus, Abdul Shukor (2012) Influences Of Transformer Winding To The Performance Of DC AC Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang Wei, Yih (2012) Data Acquisition System For Solar Panel Monitoring. Project Report. UTeM, Melaka Malaysia. (Submitted)

Anis Niza, Ramani (2012) Improvement Of Grounding System For High Voltage Laboratory FKE UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anisah, Mohd Noor (2012) Development Of Depth Sensor System For Seabed Mapping Uses Echo Sounding Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Annapoorani, Raman (2012) Laboratory Equipment Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar , Mohamed Kassim and Jamri , Mohd Saifuzam and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri (2012) Design and Development of Vibration Method for Vehicle Reverse System (VRS). Journal of Procedia Engineering, 41. pp. 1114-1120. ISSN 1877-7058

Anuar , Mohamed Kassim and Jamri , Mohd Saifuzam and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Mohd Rusdy , Yaacob (2012) Design and development of obstacle detection and warning device for above abdomen level. In: 2012 12th International Conference on Control, Automation and Systems (ICCAS), , 19-21 Oct 2012, Jeju Korea.

Anuar , Mohamed Kassim and Jamri , Mohd Saifuzam and Othman, Md Nazri and mohd zamzuri, abdul rashid and Sh. Jaafar, Sh. Ismail (2012) Design and Development of Low Cost Certified Green Building for Non Residential Existing Building (NREB). In: 2012 2nd International Conference on Electrical Engineering and Applications , 15-16 Dec 2012, Bali.

Anuar , Mohamed Kassim and Nurul Hafizah , Abdul Rahim and Takashi, Yasuno (2012) Design And Development of Tripod Hopping Robot. In: International Conference on Man-Machine Systems (ICoMMS 2012), 27-28 Feb 2012, Penang.

Anuar , Mohamed Kassim and mohd zamzuri, abdul rashid and Mohd Rusdy , Yaacob and norhafizah, abas and takashi, yasuno (2012) Effect of Reference Height Control System on CPG Networks for Quadruped Hopping Robot. In: 2012 2nd International Conference on Electrical Engineering and Applications , 15-16 Dec 2012, Bali.

Aparow, Vimal Rau and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Development of Antilock Braking System Based on Various Intelligent Control System. Applied Mechanics and Materials, 229-231. pp. 2394-2398. ISSN 1660-9336

Aparow, Vimal Rau and Hassan, Muhammad Zahir and Hudha, Khisbullah and Ahmad, Fauzi (2012) SENSORS CONFIGURATION FOR SMALL SCALE AUTONOMOUS GROUND VEHICLE. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Aripin, Muhamad Khairi and Hamzah, Norhazimi and Sam, Y.M and Selamat, Hazlina and Ismail, Muhamad Fahezal (2012) Yaw stability improvement for four-wheel active steering vehicle using sliding mode control. In: 2012 IEEE 8th International Colloquium on Signal Processing and its Applications (CSPA2012), 23 March 2012, Melaka, Malaysia.

Aripin, Muhamad Khairi and Norhazimi , Hamzah and Yahaya, Md. Sam and Norhazlina, Selamat and Mohd Rozaimi, Ghazali (2012) Second Order Sliding Mode Controller for Longitudinal Wheel Slip Control. In: 2012 IEEE 8th International Colloquium on Signal Processing and its Applications (CSPA2012), 23-25 March 2012, Melaka, Malaysia.

Asmala, A. (2012) Analysis of Maximum Likelihood Classification Technique on Landsat 5 TM Satellite Data of Tropical Land Covers. Proceedings of 2012 IEEE Internationa Conference on Control System, Computing and Engineering (ICCSCE2012). pp. 1-6. ISSN 978-1-4673-3141-8

Asmala, A. (2012) Analysis of Maximum Likelihood Classification on Multispectral Data. Applied Mathematical Sciences, 6 (129-132). pp. 6425-6436. ISSN 1312-885X

Asmala, A. (2012) Classification Simulation of RazakSAT Satellite. In: MUCET 2012, University Malaysia Perlis.

Asmala, A. and Shaun, Quegan (2012) Cloud Masking for Remotely Sensed Data Using Spectral and Principal Components Analysis. ETASR - Engineering, Technology & Applied Science Research, 2 (3). pp. 221-225. ISSN 1792-8036

Asmala, A. (2012) A Comparison between Normal and Non-Normal Data in Bootstrap. Applied Mathematical Sciences, 6 (92). 4547 -4560. ISSN 1312-885X

Asmala, A. and Sufahani, Suliadi Firdaus (2012) Analysis of Landsat 5 TM Data of Malaysian Land Covers Using ISODATA Clustering Technique. IEEE Asia-Pasific Conference on Applied Electromagnetics. pp. 92-97. ISSN 978-1-4673-3115-9

Asriana , Ibrahim (2012) A study of vegetale oils performance as a helical gear lubricant. Other thesis, UTeM.

Asyadi Azam, Mohd and Mohamad, Noraiham and Mohd Warikh, Abd Rashid (2012) Fabrication and Characterization of Epoxidized Natural Rubber Reinforced Single-Walled Carbon Nanotubes Nanocomposite. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

Asyraf , Abd Razak (2012) Energy Efficient Of Automatic Ceiling Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asyraf Taqiuddin, Ahmat Tahir (2012) Curve Tracer Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Atifa Faaidha, Munauwer (2012) Development Of Prototype Neutral-Less Time Lag Power Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang Md Isa, Azmi and Mohamad Isa, Mohd Sa'ari and Haron, Nor Zaidi and Mohd Zin, Mohd Shahril Izuan (2012) Hybrid TOA-Based MIMO and DOA-Based Beamforming for Location and Positioning in WiMAX Networks. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 4 (2). pp. 11-20. ISSN 2180-1843

Awang Md Isa, Azmi and Mohamad Isa, Mohd Sa'ari and Zakaria, Zahriladha and Mohd Zin, Mohd Shahril Izuan (2012) Simulation of Virtual MIMO Base Stations for Mobile Location in IMT-Advanced Networks. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11-13 December 2012, Melaka.

Azmi, Mohd Fairus Firdaus (2012) Flow Modelling Of Nasal Cavity With Various Flow Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

ahmad, Nur Hafizatul Tul Huda and Abdullah, Abdul Rahim and JOPRI, MOHD HATTA (2012) POWER QUALITY SIGNALS DETECTION AND CLASSIFICATION USING LINEAR TIME FREQUENCY DISTRIBUTION. In: The Power and Energy Conversion Symposium (PECS 2012), 17/12/2012, UTEM.

B

Baba Noor, Nuratiqah (2012) Natural Convective Heat Transfer In Square Enclosure With Partition On Top Wall. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badrul Hisham, Ahmad (2012) Pin Diode With Dumbbell Shape Of Defected Ground Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahaman, Nazrulazhar and Anton Satria, Prabuwono and Mas'ud, Mohd Zaki and Abdollah, Mohd Faizal (2012) Effectiveness of security tools to anomalies on tunneled traffic. Information Technology Journal, 11 (2). pp. 191-199. ISSN 1812-5638

Bahaman, Nazrulazhar and Anton Satria, Prabuwono and Raed, AlSaqour and Mas'ud, Mohd Zaki (2012) Network performance evaluation of tunneling mechanism. Journal of Applied Sciences, 12 (5). pp. 459-465. ISSN 1812-5654

Bahaman, Nazrulazhar and Erman, Hamid and Anton Satria, Prabuwono (2012) Network performance evaluation of 6to4 tunneling. In: International Conference on Innovation Management and Technology Research, 21-22 May 2012, Malacca, Malaysia.

Bahari, Norhazilina and Jidin , Auzani and Abdullah, Abdul Rahim and Othman, Md Nazri and Manap, Mustafa (2012) Modeling and Simulation of Torque Hysteresis Controller for Brushless DC Motor Drives. In: IEEE Symposium on Industrial Electronics and Applications (ISIEA), 2012 , 23-26 Sept. 2012, Bandung, Indonesia.

Baharudin, Zikri Abadi and Noor Azlinda Ahmad, and Fernando Mahendra, and Jäkke Mäkelä, and Vernon Cooray, (2012) Comparative study on preliminary breakdown pulse trains observed in Johor, Malaysia and Florida, USA. Atmospheric Research, - (ATMOS 02587). pp. 1-11. ISSN 0169-8095

Baharudin, Zikri Abadi (2012) Electric field changes generated by the preliminary breakdown for the negative cloud-to-ground lightning flashes in Malaysia and Sweden. Journal of Atmospheric Solar Terrestrial , 84-85. pp. 15-24. ISSN 1364-6826

Bakar, N. and Ishak, N. H. and M. Lani, S (2012) Analysis on using 3D approach in learning for Electromagnetic Theory (3D-EmT). In: International Call On Active Learning 2012, 18/9/2012 - 20/9/2012, UTeM.

Bakar, N. and M. Zain, Z.R and Hisham, S. (2012) THE EFFECTIVENESS OF 3D ALKENE ISOMERISME COURSEWARE (3D-AI) AT MRSM TERENDAK, MELAKA. Malaysian Journal of Educational Technology. pp. 1-7. ISSN 1675 0292

Bakar, N. and M.Hatta, N. and Shahbodin, F. (2012) 3D Approach in the Development of Chemistry Subject at UTeM: Atom Cubic. Malaysian Journal of Educational Technology, 12 (4). pp. 1-4. ISSN 1675 0292

Bakar, N. and Shuhimi, R.E. and Ishak, N. H. and Husain, K. (2012) The design of a Course Management System (CrMS) for secondary school in Johor. Malaysian Journal of Educational Technology. pp. 5-15. ISSN 1675 0292

Bakar, N. and W. Husain, W.N.L and Ishak, N. H. (2012) Implementation of 2D Animation for Interactive Storybook “Reading for Fun with Anna”. In: International Conference on Active Learning (ICAL2012), 18-20 September 2012, UTeM.

Bakar, N. and Zakaria, M. H. and Salam, S. (2012) Adobe Flash Cs5 Professional Includes Exercise Files And Training Videos, 2012. PENERBIT UTeM.

Basari, A. S. H. and abas, z.a. and salleh, s. (2012) Seven Cases Unstructured Triangulation Technique for Simplified Version of Conceptual Model of Ethylene Furnace for Radiative Heat Transfer Approximation. International Journal of Computer Applications , Volume (21). pp. 36-43. ISSN 0975-8887

Basari, A.S.H. and Burairah, Hussin and Pramudya, G. (2012) Opinion Mining of Movie Review using Hybrid Method of Support Vector Machine and Particle Swarm Optimization. In: MUCET2012, 20-21 NOVEMBER 2012, HOTEL SERI MALAYSIA, KANGAR,PERLIS.

Basari, Amat Amir and Salam, Saifullah and Abdul Aziz, Khairul Azha and Abdul Manap, Redzuan (2012) Half Car Active Suspension System. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Basiron, Halizah (2012) A Statistical Model of Error Correction for Computer Assisted Language Learning Systems. PhD thesis, University of Otago.

Boon, Kah Seng (2012) A Prototype Of An Intelligent Lighting Control System Powered Via Photovoltaic Technologies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chan, Xin Zhi (2012) Laser Range Finder Scanning System For Tree Diameter And Circumference Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Yun Kim (2012) INTEGRATING QUALITY TOOL ON IMPROVING OVERALL EQUIPMENT EFFICIENCY IN AUTOCLAVE PROCESS: CASE STUDY. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mat, Rosli (2012) The Study Of Energy Saving On ACMV (Air-Conditioning And Mechanical Ventilation) System For FKM Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, S.Y. (2012) Aerodynamic stability of road vehicles in dynamic motion. In: The Seventh International Colloquium on Bluff Body Aerodynamics and Applications, 2-6 September 2012, Shanghai, China.

Cheng, S.Y. (2012) Effects of Transient Aerodynamics on Vehicle Stability: A Large Eddy Simulation analysis. In: 30th AIAA Applied aerodynamics Conference, 26-28 June 2012, New Orleans, USA.

Cheng, S.Y. (2012) Numerical quantification of aerodynamic damping on pitching of vehicle-inspired bluff body. Journal of Fluids and Structures. pp. 188-204. ISSN 08899746

Cheng, S.Y. (2012) On the unsteady aerodynamics of road vehicles in the dynamic motions. In: 9th International ERCOFTAC Symposium on Engineering Turbulence Modelling and Measurements, 6 - 8 June 2012, Thessaloniki, Greece.

Cheok, Yong Seng and Zulkifilie, Ibrahim (2012) Vector control drive of permanent magnet synchronous motor based dsSpace DS1103 implementation. In: 2012 IEEE International Power Engineering and Optimization Conference (PEDCO) , 6-7 June 2012, Melaka, Malaysia. (Submitted)

Chin, J. W. C and Kok, C.K. and RAJMOHAN, M.M. and Yeo, V.S.H and SAID, M.R. (2012) Investigating the Effects of Lead Forming Parameters on Intermetallic Layer Crack Using the Finite-Element Method. Journal of ELECTRONIC MATERIALS, 41 (4). pp. 774-781. ISSN 0361-5235

Chin, Shi Hui (2012) An Application Of Linear Programming In Aggreate Planning A Case Study At Electronic Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiow, Chun Wei (2012) Quantification Of Ionospheric Scintillation On Global Positioning System (GPS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chip, Wai Yein (2012) Mobile Health Encyclopedia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Mei Ching (2012) Livestock Autofeeding And Monitoring System (LIFE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Min Po (2012) "You Have Mail" A Pigeon Hole Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Shin Horng (2012) AR-CM NCTF Control for Precision Positioning Systems - Concept and Results. In: SIXTH ASIA MODELING SYMPOSIUM , MAY 29-31, 2012, BALI, INDONESIA.

Chong, Siew Leet (2012) Benefit of Enterprise Resource Planning (ERP) system towards supply chain performance. Masters thesis, UTeM.

Chua, Kok Yau and A.R.M., Warikh and T., Joseph Sahaya Anand (2012) Microstructural studies of Cu-Al Intermetallic Compound at Thermosonic Wire Bonding Interface. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15-16 October 2012, Hotel Equatorial, Melaka.

Chua, Kok Yau and T., Joseph Sahaya Anand (2012) XRD ANALYSIS OF Cu-Al INTERCONNECT INTERMETALLIC COMPOUND IN AN ANNEALED MICRO-CHIP. In: International Conference on X-Rays & Related Techniques in Research & Industry , 3-5 July 2012, Vistana Hotel, Penang.

D

D. Ravisankar, Devarajee (2012) System Identification Of Electronic Wedge Brake (EWB). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dalilah, Mohd Daud (2012) An emperical study on innovative traditional food products and customer acceptance using Theory of Planned Behavior. Masters thesis, UTeM.

Dan, M M P and Aaron Yu, L (2012) Design and Analysis a New Materials of Gasket Pipping Using Waste Rubber Tyres and Coconut Coir Fibre. Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-15. ISSN 1985-3157

Dan, M M P and Bani Hashim, Ahmad Yusairi and Adnan, R A B and Ruzaidi, Z and Khairul, A A R and Rizal, M S and Anton, S P (2012) Computer Vision Based Robotic Polishing Using Artificial Neural Networks. Journal of Advanced Manufacturing Technology, 6 (1). pp. 1-16. ISSN 1985-3157

Dan, M M P and Fadhli Akmal, A M (2012) Design Crash Cushion Using Waste Tire for Toll Plaza Barrier. Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-10. ISSN 1985-3157

Dan, M M P and Khairul Fikhri, K A (2012) Study of Bollard Pull Harbour Tug: Focuses on Stability and Straight Movement. Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 1-14. ISSN 1985-3157

Danial , Azmi (2012) Real Time Infra-red Tomography For Pipeline Flow Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Danie Danial, Mohamed Salim (2012) Implementation Of Secure Confidential-document Transfer And Storage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Denie, Sangkiu (2012) Mobile Learning Application For Fundamental Electronics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dg Hafizah, Kassim (2012) Investigation On The Performance Of A Hybrid Microperforated Panel-Natural Waste Fibre As An Eco-Friendly Sound And Noise Barrier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Diana Shazelin, Mohd Nasir (2012) Blaster.T Attack Pattern Generalization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Din, Abdul Talib and Azraai, Shamsul Bahari and Thenamirtham, Kesavan (2012) Design and Development of A Vertical Wind Turbine Using Slow Wind Speed for Mini Power Generation. In: E-Leader Conference, Manila, 2nd January 2012, Global Innovative College, Global City, Manila.

Dnash Kumar, Mohan (2012) Smartphone Controlled Mobile Security Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dora, Mohd Taib and Hussin, Hanipah and Sidek, Safiah (2012) Impacts of Training on Knowledge Dissemination and Application among Academics in Malaysian Institutions of Higher Education. Asian Social Science, 8 (1). pp. 146-155. ISSN 1911-2017

E

Effendi , Mohamad and Adi , Saptari and Rohana , Abdullah (2012) The Implementation Of Risk Management In An Aerospace Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eneizan, Bilal Mohammad (2012) A study on the potential of doing business in Malaysia by Jordanian entrepreneurs. Masters thesis, UTeM.

Eric, Jau Jeffrey (2012) Performance Of A Condenser With Cooper Oxide (II) Nanoparticles Suspended Into Host Refrigerant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Eugene , Kuek Vee Chet (2012) Distance Measurement Device Using Programmable Interface Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

F

FUDHAIL ABDUL MUNIR, F.A Munir and MOHD RODY MOHD ZIN, M.R.M Zin and NOR AZWADI CHE SIDIK, N.A.C Sidik and MOHD IRWAN MOHD AZMI, M.I.M Azmi (2012) Numerical Simulations of Flow Behaviour in Driven Cavities at High Reynolds Numbers. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 12 (6). pp. 97-103. ISSN 1511-788X

Fadhilah, S.A and Rafeq, Saleman Abdul and Hairul, B. and Nur Hazwani, Mokhtar and Nona Merry, M. Mitan (2012) NANOFLUID AS COOLANT IN AUTOMOTIVE COOLING SYSTEM–HEAT TRANSFER CHARACTERISTICS OF CAR RADIATOR USING CU-BASED NANOFLUID. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Fadhilah, Shikh Anuar (2012) A Study Of Copper Based Nanofluids Thermophysical Properties As Advanced Coolant In Automotive Radiator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhli, Syahrial and Safarudin Gazali , Herawan and Nazri , Md Daud (2012) Development Of Electric Formula Varsity Race Car For Green Campus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhli Shahir , Zakaria (2012) Design And Implementation of Elevator Controller On A FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadzil, Muhammad Faris (2012) Development Of A Mini Race Boat Powered By Solar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faisal Faris, Rahim (2012) Optimization Of Mixing Parameters To Produce PP - Enr Blend Via Response Surface Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Nabila, Md Nawi (2012) Carl's Restaurant Delivery Online System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan, Ahmad Fuad (2012) The Implementation Of Design For Reliability In Product Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhan Arif, Mohamad (2012) Application Radio Frequency In Keeping Track Shopping Trolley Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Masron (2012) The Mechanical Properties Of Polypropylene/Polylactic Acid (PP-PLA) Polymer Blends. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Md. Lazi (2012) Cost Saving Campaign. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faris , Rahmat and Fakrulradzi , Idris and Mohamad, Azri and Vikneswara, Kanathasan and Nuraishah, Sarimin and Mas Haslinda, Mohamad (2012) Performance analysis of VoIP in Multi-hop Wireless Network. In: IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 11-13 Dec 2012, Melaka.

Fauziyah, Salehuddin (2012) Impact of Different Dose and Angle in HALO Structure for 45nm NMOS Device. Advanced Materials Research, 383-39. pp. 6827-6833. ISSN 10226680

Fevilia Nurnadia, Andria Syaifoel (2012) The Gap Analysis Measurement Of Linear Vs Non-Linear Parametric On Costemer Satification Based On Importance Performance Analysis And Kano Method In Service Industries(Hotel). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fikri Naim, Mohd Rosli (2012) Hexapod Robot Motor Controller Using FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fong, Kar Weng (2012) Inhomogenous Color Object Recognition Using Monochromatic Based Technique With Monochrome Camera And Color Filter. Project Report. UTeM, Melaka. (Submitted)

Fudhail, Abdul Munir (2012) Accurate Numerical Prediction of Incompressible Fluid Flow in Lid-Driven Cavities. Applied Mechanics and Materials, 110-11 (2012). pp. 4365-4372. ISSN 1660-9336

Fudhail , Abdul Munir and Mohd Irwan, Mohd Azmi and Nadlene, Razali and Ernie, Mat Tokit (2012) The Effect of Parameter Changes to the Performance of a Triangular Shape Interrupted Microchannel Heat Sink. Jurnal Teknologi, 58. pp. 33-37. ISSN 0127–9696

G

G. Noma, Nasir and Mohd Khanapi, Abd Ghani (2012) Discovering Pattern in Medical Audiology Data with FP-Growth Algorithm. In: Biomedical Engineering and Sciences (IECBES), 2012 IEEE EMBS, 17-19 December, Langkawi, Kedah Malaysia.

Gan, Hock Seng (2012) Analysis Of VoIP Attacks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, Chin Kim and Low , Siew Yi (2012) Techno-economic appraisal of alternative distribution network design options. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 December 2012, Kota Kinabalu, Sabah, Malaysia.

Gannapathy, Vigneswara Rao and Suaidi, Mohd Kadim and Johal, Muhammad Syahrir and Fayeez, Ahamed Tuani Ibrahim and Siva Kumar, Subramaniam and Ranjit, S.S.S. (2012) An Efficient Medium Access Control (MAC) Forwarding Technique for Multihop Network. In: PSU-USM International Conference on Art and Sciences 2012, 2nd - 4th December 2012, Bay View Resort, Penang.

Gannapathy, Vigneswara Rao and Subramaniam, S.K. and Esro, Mazran and Ranjit, S.S.S. and Suaidi, Mohd Kadim (2012) Intelligent Health Monitoring System (IHMS) Using Wireless ZigBee Technology. In: Prosiding Seminar Hasil Penyelidikan Kementerian Pengajian Tinggi Jilid III ICT dan Kejuruteraan, 8th to 9th November 2012, AKEPT, Bandar Enstek.

Gede , Pramudya Ananta (2012) A Study Of Multi-Exponential Processes Analysis Methods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Joen Sam (2012) Design And Development Of Graphical User Interface (Gui) For Underwater Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Jzun Hwee (2012) Modelling Of Non-Reverberant Acoustic Space Using Statistical Energy Analysis (Sea). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Merreen (2012) Decision Support System For Organizing Supervision Distribution (DSSOSD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Wee Yen (2012) Development Of Direct Torque Control (DTC) Of Five-Phase Induction Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Green, Roger J. and Rihawi, Zeina and Abdul Mutalip, Zaiton and Leeson, Mark S. (2012) Networks in automotive systems: the potential for Optical Wireless integration. In: International Conference on Transparent Optical Networks (ICTON 2012), 2 - 5 July 2012, University of Warwick, UK.

H

H., Fayaz and R., Saidur and N. , Razali and F.R, Anuar and A.R, Saleman and M.R, Islam (2012) An overview of hydrogen as a vehicle fuel. RENEWABLE & SUSTAINABLE ENERGY, 16. pp. 1511-5528. ISSN 1364-0321

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) Analysis and development of recycled materials for wood plastic composite product. Elixir Mech. Engg., 51 (51). pp. 10834-10840. ISSN 2229 -712X

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI and PERUMAL, PUVANASVARAN and ABD RAZAK , JEEFFERIE (2012) Real of Simply Assembly Line Balancing using Fact-Model. International Journal of Computer and Electrical Engineering, 4 (6). pp. 870-874. ISSN 1793-8163

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) TAGUCHI’S QUALITY IMPROVEMENT ANALYSIS OF THE SME BREAD MANUFACTURING. Global Engineers & Technologists Review, 2 (9). pp. 6-18. ISSN 2231-9700

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI and YAHAYA, SAIFUDIN HAFIZ (2012) HOW TO MEASURE AND IDENTIFY THE ULTIMATE IMPROVEMENT REQUIRED FOR CUSTOMER SATISFACTION. Global Engineers & Technologists Review, 2 (11). pp. 15-28. ISSN 2231-9700

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI and YAHAYA, SAIFUDIN HAFIZ (2012) REVISITED THE IMPORTANCE AND PERFORMANCE ANALYSIS (IPA) AND KANO MODEL FOR CUSTOMER SATISFACTION MEASUREMENT. Global Engineers & Technologists Review, 2 (1). pp. 22-39. ISSN 2231-9700

Haeryip , Sihombing (2012) An Analysis of the Customer Satisfaction: A Case Study of Bank Service. International Journal of Application or Innovation in Engineering & Management (IJAIEM), 1 (2). pp. 33-43. ISSN 2319 - 4847

Hafizah, Md Nor (2012) Smart Protection System For Industry And Domestic Distribution Board (SPeeeDo). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hairul Nizam, Talib and Zulkifilie, Ibrahim and N. A. , Rahim and N. M., Yaakob (2012) Development of combined vector and torque control methods for independent two induction motor drives. In: IEEE International Power Engineering and Optimization Conference (PEDCO), 6-7 June 2012, Melaka, Malaysia. (Submitted)

Halim, Mohd Faizal and Ahmad, Kamarul Ariffin (2012) CFD SIMULATION OF PASSIVE VORTEX GENERATOR ON SEPARATED FLOW DIFFUSER. In: MUCET 2013, 2-3 December 2013, Kuantan. (In Press)

Halis, Hanifi (2012) Productiviti Improvement In Manufacturing Industry. Project Report. UTeM, Melaka< Malaysia. (Submitted)

Hambali , Arep and Tajul Ariffin, Abdullah and Nurul Hidayah , Arshad (2012) Development of conceptual design of car housing side mirror using intergrated approach. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Hamzah, Harma Ezzura (2012) The impact of leadership style on primary school performance in Jasin district, Melaka. Masters thesis, UTeM.

Hamzah, Rostam Affendi and A Aziz, Khairul Azha and M Shokri, Ahmad Sayuthi (2012) A Pixel to Pixel Correspondence and Region of Interest in Stereo Vision Application. In: 2012 IEEE Symposium on Computers & Informatics, 18-20 March 2012, Penang.

Hamzah, Rostam Affendi and Abd Ghani, SHAMSUL FAKHAR and Kadmin, AHMAD FAUZAN and A Aziz, Khairul Azha (2012) A Practical Method for Camera Calibration in Stereo Vision Mobile Robot Navigation. In: 2012 IEEE Student Conference on Research and Development (SCOReD), 5-6 Dicember 2012, Penang, Malaysia.

Hamzah, Rostam Affendi and Abd Ghani, Shamsul Fakhar and Din, Asri and A Aziz, Khairul Azha (2012) Visualization of Image Distortion on Camera Calibration for Stereo Vision Application. In: 2012 IEEE International Conference on Control System, Computing and Engineering, 23-25 November 2012, Pulau Pinang, Malaysia.

Hamzah , Sakidin and Tay, Choo Chuan (2012) Transformation of Neill Mapping Function For GPS Tropospheric Delay. Journal of Engineering and Technology, 3 (1). pp. 1-11. ISSN 2180-3811

Hanipah, Hussin (2012) Kerjasama Asean Dalam Program Profesional: Satu Kajian Pembangunan Kurikulum Pembelajaran Sepanjang Hayat. Project Report. UTeM PJP/2010/PBPI/S-806. (Submitted)

Hanipah, Hussin and Mohd Fadzil , Mohd Idris and Safiah, Sidek and Noor Azlin, Bidin (2012) The Roles Of Malaysian Premier Polytechnics In Human Capital Development: Transferring Mindset For Innovation 2012. Technical Report. AKePT 2012 / R&I 600.

Hanipah , Hussin (2012) Innovation and creativity showcase: “the commercialization of research project and intellectual property assets”. Project Report. AKePT 2013.

Hanipah , Hussin (2012) Penilaian dan analisis pedagogi ke atas penerapan kemahiran insaniah pelajar melalui teknik refleksi. Project Report. AKePT. (Unpublished)

Hanipah , Hussin (2012) Reflection on action (questions for subject matter experts). Discussion Paper. UTeM 2012. (Unpublished)

Hanipah , Hussin (2012) Research leadership think tank series: research methodology module for high impact research. Technical Report. AKePT 2013. (Submitted)

Hanipah , Hussin (2012) The Role of Polytechnics in Innovation-Reflection on Strategy for Innovation. [Teaching Resource]

Hanipah , Hussin (2012) Triple helix program. Technical Report. AKePT 2012.

Hanis Haziqah , Mazharudin (2012) Zealous Android's Sophisticated Timetable Reminder And Organizer (ZASTRO) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hannan, MA and Azidin, FA and Mohamed, A (2012) Light Vehicle Energy Management System using Multi-Power Sources. PRZEGLĄD ELEKTROTECHNICZNY (Electrical Review), 88 (3b). pp. 197-204. ISSN 0033-2097

Harizah , Ideris (2012) HIRARC Assesment Of Machining Processes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haron, Nor Zaidi and Darsono, Abdul Majid and Awang Md Isa, Azmi (2012) High-Performance, Fault-Tolerant Architecture for Reliable Hybrid Nanolectronic Memories. Journal of Telecommunication, Electronic and Computer Engineering, 4 (2). pp. 1-10. ISSN 2180 - 1843

Haroon, Hazura and Abdul Razak, Hanim and Bidin, Mardiana and Menon, P.S and Shaari, A.R and Arsad, N. and Mukhtar, W.M. and Abdullah, H. (2012) Design and characterization of multiple coupled microring based wavelegnth demultiplexer in silicon-on-insulator (SOI). Journal of Nonlinear Optical Physics and Materials, 21 (1). pp. 1250004-1. ISSN 10.1142/S021886351250004X

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Sahbudin, Saari and Majlis, B.Y and Menon, P.S (2012) Performance of Optical Wavelength Demultiplexer based on Silicon- on- Insulator (SOI) Microring Resonators (MRRs). Advanced Materials Research, 378-379. pp. 549-552. ISSN 1662-8985

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Sahbudin, Saari and Menon, P.S (2012) Process Modeling, Optimization and Characterization of Silicon <100> Optical Waveguides by Anisotropic Wet Etching. Advanced Materials Research, 403-408. pp. 4295-4299. ISSN 1662-8985

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Shaari, Sahbudin and Menon, P.S and Majlis, B.Y (2012) Effect of Low Temperature on The Fabrication of Microring Resonator by Wet Etching. American Journal of Applied Sciences, 9 (12). pp. 1922-1928. ISSN 1546-9239

Hasan, Nor Halim and Said, M. R and Leman, A.M (2012) Local Exhaust Ventilation and Application: A Review. International Journal of Engineering & Technology. pp. 39-43. ISSN 127904-7575

Hasan, Nor Halim and Said, M. R and Leman, A. M (2012) Local Exhaust Ventilation: PAST, PRESENT, and FUTURE. In: 15th Conference and Exibition on Occupational Safety & Health, 2-4 Sept 2012, Sunway Pyramid Convention Centre, Selangor.

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Hassan, Attan and Mohd Soufhwee, Abd Rahman (2012) Nitrogen Gas Partial Pressure Control Effects on Titanium Nitride Coating’s Thickness and Colour over Tungsten Carbide Substrate using PVD. In: IDECON2012, 15-16 October 2012, Melaka.

Hasim, Norhaslinda and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Anuar , Mohamed Kassim and Shahrum Shah, Abdullah (2012) Development of Fuzzy Logic Water Bath Temperature Controller using MATLAB. In: 2012 IEEE International Conference on Control System, Computing and Engineering, 23- 25 Nov 2012, Penang.

Hassan, Muhammad Zahir and Magaswaran, K. and Phuman Singh, A.S. (2012) High Speed Experimental Study of Friction Induced Vibration in Disc Brakes. Applied Mechanics and Materials, 229-231. pp. 747-749. ISSN 1660-9336

Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Mohamad Zin, Mohd Rody and Mohd Irwan, Mohd Azmi (2012) THERMAL ANALYSIS OF A OF BRAKE DISC ROTOR FOR PERSONAL ELECTRIC VEHICLE. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Hawa, Ismail (2012) Service quality, customer satisfaction pattern consumption of panorama Melaka : an empirical investigation. Masters thesis, UTeM.

Herawan, Safarudin Gazali and Abdul Hakim , Rohhaian and Ahmad Faris , Ismail (2012) WASTE HEAT RECOVERY FROM THE EXHAUST OF NATURAL ASPIRATED ENGINE. In: The 3rd International Conference on Engineering and ICT (ICEI 2012), 4 - 5 APRIL 2012, MELAKA, MALAYSIA.

Herawan, Safarudin Gazali and Ayob, Md Razali (2012) EXPERIMENTALLY INVESTIGATION THE PERFORMANCE OF TURBO-GENERATOR IN GASOLINE VEHICLE. In: The 3rd International Conference on Engineering and ICT (ICEI 2012), 4 - 5 April 2012, Melaka, Malaysia.

Ho, Bee Kim (2012) Effect Of Filter Unit Back Pressure To The Water Hydraulic System Pump Performance - 24 Pages. Project Report. UTeM, Melaka, Malaysia. (Submitted)

How, Shu Wen (2012) Centralized Water Distribution Control And Monitoring System Using Scada. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husnul Hafiz, Ismail (2012) Merekabentuk Alatan Bagi Penyediaan Makanan Kucing Automatik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussain, Noor Wahidayu (2012) Pembuatan Dan Karakterisasi Kitosan Dari Sisa Kulit Udang Dan Cengkerang Ketam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussein, Nur Izan Syahriah and Md Ali, Mohd Amran and Sivarao, Subramonian (2012) Effect of CNC Ball Nose End Milling Process Parameters on Surface Roughness and Chip Length of Aluminium Alloy 6061. Universiti Teknikal Malaysia Melaka, pp. 1-3. ISBN 978-967-0257-16-7

I

Ibrahim, Abu Bakar and Othman, Abdul Rani and Husain, Mohd Nor and Johal, Mohammad Syahrir (2012) High Gain, Low Noise Cascode LNA with RF Amplifier at 5.8GHz Using T-Matching Networks. In: 2nd International Conference on Advancements in Electronics and Power Engineering (ICAEPE'2012) , 30 June 2012, Bali.

Ibrahim, Zulkifilie and Mat Lazi, Jurifa and Sulaiman , Marizan (2012) Independent Speed Sensorless Control of Dual Parallel PMSM based on Five-Leg Inverter. In: 9th International Multi-Conference on Systems, Signals and Devices SSD 2012 , 20-23 Mac 2012, Chemnizt, German.

Ibrahim, Abu Bakar and Othman, Abdul Rani and Husain, Mohd Nor and Johal, Mohammad Syahrir (2012) The Cascode and Cascaded Techniques LNA at 5.8GHz Using T-Matching Network for WiMAX Applications. In: International Conference on Arts, Social Sciences and Technology 2012 (ICAST 2012) , 3-5 March 2012, Penang.

Ibrahim, Zulkifilie and Mohd Yaakop, Nurazlin and Sulaiman , Marizan and Mat Lazi, Jurifa and Abu Hasim, Ahmad Shukri and Patakor, Fizatul Aini (2012) Electric Differential With Svpwm Direct Torque Control Using Five-Leg Inverter For Electric Vehicles. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 599-609. ISSN 1992-8645

Idris, M. Idzdihar and Zainudin, M. N. A and Ismail , M. Muzafar and Abd. Rahim, Rosman (2012) Design of a Low Voltage Class AB Variable Gain Amplifier (VGA). JTEC. pp. 1-7. ISSN 2180 - 1843

Idris, Muhammad Idzdihar and Zainudin, M.N.Shah and Ismail, M.Muzafar and Abd. Rahim, Rosman (2012) Design of a Low Voltage Class AB Variable Gain Amplifier (VGA). Journal of Telecommunication, Electronic and Computer Engineering (ISSN No 2180-1843). pp. 69-74. ISSN ISSN No 2180-1843

Ikhwan Hakim, Mat Idera (2012) Pembuka Nat Roda Kenderaan Daya Kilas Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran , Naziri (2012) Development Of Wireless Surface Electromyograhy For Tele-Rehabilitation Applicationn Body Area Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran Syakir, Mohamad and S. Thiru, Chitrambalam (2012) Investigations on the thermo-physical properties of nanofluid-based carbon nanofibers under modified testing conditions. Int. J. Nanoelectronics and Materials, 5 (1). pp. 25-30. ISSN 1985-5761

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Indera Kasuma, Mohamad Yunus (2012) The Study Of Metal-Filler On Graphite Polymer Composite. Project Report. UTeM, Melaka. (Submitted)

Intan Fatihah , Ahmad (2012) Impact Of Meeting Quality And Delivery On Customer Satisfaction For A Metal Based Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Liyana, Ismail (2012) Manufacturing Process Selection For Automotive Bumper Fascia Using Analytical Hierarchy Process (AHP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irshad, Ismail (2012) Modeling Stand Alone Photovoltaic-Wind Hybrid System For 100W Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Isa, Halim (2012) Development of Prolonged Standing Strain Index to Quantify Risk Levels of Standing Jobs. International Journal of Occupational Safety and Ergonomics (JOSE), 18 (1). pp. 85-96. ISSN 1080-3548

Isa, Halim (2012) Modelling and Optimization Approach of Quantitative Environmental Ergonomics in Malaysian Automotive Industry. Journal of Occupational Safety and Health, 9 (1). pp. 7-13. ISSN 1675-5456

Isa, Halim (2012) Preliminary Investigations on the Reduction of Foot Pressure Measurement and Muscle Activity with Different Insole Materials. Advanced Materials Research, 576. pp. 695-699. ISSN 1662-8985

Isa, Halim and Al Amin, Mohamed Sultan and Seri Rahayu , Kamat and Rohana, Abdullah (2012) Muscle Activity while Standing for Prolonged Time Periods in Metal Stamping Industry. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

Isa, Halim and Rohana, Abdullah (2012) A Survey on Work-related Musculoskeletal Disorders (WMSDs)among Construction Workers. Journal of Occupational Safety and Health, 9 (1). pp. 15-19. ISSN 1675-5456

Isa, Halim (2012) Analysis of Time-to-Fatigue for Standing Jobs in Metal Stamping Industry. Advanced Materials Research, 433-44. pp. 2155-2161. ISSN 1662-8985

Isa, Halim (2012) Assessment of Muscle Fatigue Associated with Prolonged Standing in the Workplace. Safety and Health at Work, 3 (1). pp. 31-42. ISSN 2093-7911

Isbollah, Harun (2012) Rekabentuk Dan Analisa Kerusi Roda Untuk Orang Yang Mengalami Masalah Separa Lumpuh Pada Bahagian Kaki. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, N. H. and Bakar, N. and Shahbodin, F. and Ahmad, R. and Salam, S. (2012) Implementation of 3D Approach in Development of Electromagnetic Theory Courseware. In: International Conference on Innovation, Management and Technology Research, 21-22 May 2012, Melaka.

Ismail, Nurul Halimatul Asmak and Hassan, Rosilah and Wan Mohd Ghazali, Khadijah (2012) A Study On Protocol Stack In 6lowpan Model. Journal of Theoretical and Applied Information Technology, 41 (2). pp. 220-229. ISSN 1992-8645

Ismail , Kamariah and Abdul Majid, Izaidin and Leow, Y.R and Yong, C. Y. and Thawala, W.D (2012) Critical success factors of new product development in technology based firms: a case study. African Journal of Business Management. pp. 1-8. ISSN 1993-8233 ©2011 Academic Journals

Izzad Amir, Abdul Karim (2012) The Effect Of Coconut Waste On Concrete Structure Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzuan, Ahmad (2012) The Error Compensation Strategy Using Step Approach For Machining Thin-Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

J.A., Adnan and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Artificial Immune System (AIS) Algorithm For Optimizing Shear Zone Temperature In CNC Turning Operation. In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

Jaafar, Hazriq Izzuan (2012) Current Trend of Tactile Sensor in Advanced Applications. Sensors & Transducers, 143 (8). pp. 32-43. ISSN 1726-5479

Jaafar, Anuar and Zainuddin, Muhammad Noorazlan Shah and Ismail, Mohd Muzafar and Othman, Dr. Wan Amir Fuad Wajdi and Mahmud, Mohd Nazri (2012) Bit Communication in Artificial Swarm. In: INTERNATIONAL CONFERENCE ON COMPUTER & INFORMATION SCIENCES, 12 - 14 JUNE 2012, KUALA LUMPUR CONVENTION CENTRE.

Jaafar, Hazriq Izzuan (2012) PSO-Tuned PID Controller for a Nonlinear Gantry Crane System. In: 2012 IEEE International Conference on Control System, Computing and Engineering, 23-25 November 2012, Pulau Pinang, Malaysia.

Jamri , Mohd Saifuzam and Anuar , Mohamed Kassim and Mohd Ruzaini, Hashim (2012) A Voltage Mode Control Maximum Power Point Tracking for Stand-Alone Photovoltaic System. In: 2012 2nd International Conference on Electrical Engineering and Applications , 15-16 Dec 2012, Bali.

Jano, Zanariah (2012) Presentations. In: Managing Soft Skills for Personality Development. Tata McGraw Hill, New Delhi, India, pp. 147-163. ISBN (10): 0-07-107813-4

Jano, Zanariah and Janor, Hawati and Elangsegaran, Rajendraan and Khamis, Noorli and Md Saad, Mohd Shamsuri (2012) Internet Banking: Analysing encouragement and impediment factors among academicians. International Journal of Computer Networks and Wireless Communication, 2 (3). pp. 335-341. ISSN 2250-3501

Jaspal, Singh (2012) Development Of Smart Driver For Led Street Lighting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaya Kumar, Yogan (2012) Automatic Identification of Cross-document Structural Relationships. In: International Conference on Information Retrieval and Knowledge Management, CAMP’12, 13-15 March 2012, Mines, Kuala Lumpur.

Jaya Kumar, Yogan (2012) Automatic Multi Document Summarization Approaches. Journal of Computer Science, 8 (1). pp. 133-140. ISSN 1549-3636

Jaya Kumar, Yogan (2012) Component Based Summarization Using Automatic Identification Of Cross-Document Structural Relationship. In: IADIS INTERNATIONAL CONFERENCE APPLIED COMPUTING 2012, 19-21 October 2012, Madrid, Spain.

Jaya Kumar, Yogan (2012) Cross-document Structural Relationship Identification Using Supervised Machine Learning. Applied Soft Computing, 12 (10). pp. 3124-3131. ISSN 1568-4946

Jaya Kumar, Yogan (2012) A Genetic-CBR Approach for Cross-Document Relationship Identification. In: Advanced Machine Learning Technologies and Applications. Communications in Computer and Information Science, 322 (322). SPRINGER VERLAG, BERLIN HEIDELBERG, pp. 182-192. ISBN 978-3-642-35325-3

Jidin, Auzani (2012) FPGA Based a PWM Technique for Permanent Magnet AC Motor Drives. International Journal of Reconfigurable and Embedded Systems (IJRES). pp. 43-48. ISSN 2089-4864

Jidin, Auzani (2012) Simplified VHDL Coding of Modified Non-Restoring Square Root Calculator. International Journal of Reconfigurable and Embedded Systems (IJRES). pp. 37-42. ISSN 2089-4864

Jidin, Auzani and Nik Idris, Nik Rumzi and Mohamed Yatim, Abdul Halim and Sutikno, Tole and Elbuluk, Malik (2012) A Wide-Speed High Torque Capability Utilizing Overmodulation Strategy in DTC of Induction Machines With Constant Switching Frequency Controller. IEEE Transactions on Power Electronics, 27 (5). pp. 2566-2575. ISSN 0885-8993

Jidin , Auzani (2012) FPGA based five-phase sinusoidal PWM generator. In: IEEE International Conference on Power and Energy (PECon), 2012, 2-5 Dec. 2012, Kota Kinabalu.

Joehan, Ariff Ismail (2012) Design And Fabricate An Ergonomics Cockpit For Single Seater Formula Varsity Electric Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juhaini, Jabar and Claudine , Soosay (2012) Absorptive capacity, resources and alliances: Does technology transfer lead to enhanced manufacturing performance? In: The 10th ANZAM Operations, Supply Chain and Services Management, 14 June - 15 June, Melbourne, Australia.

Juhaini, Jabar (2012) Strategic technology alliances, technology transfer and the performance of Malaysian manufacturer. Journal of Engineering and Technology. pp. 69-98. ISSN 2180-3811

Juhaini , Jabar and Norfaridatul Akmaliah, Othman and Md Nor Hayati, Tahir (2012) The Mediating Effect Of Technology Transfer In Strategic Technology Alliances : A Study On Malaysian Manufacturers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana, Yaakub (2012) Reclamation Of Aerospace-Grade Carbon Fibre Prepreg Waste Through Second Impregnation Of Thermoset Polymer Via Hand Lay-Up Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana , Mohd Salleh (2012) Robot Simulation For Human Behaviour (In Team Of Attitude And Discipline). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Julie Aidah, Jusin (2012) Automated Guided Vehicle(AGV). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jusoh, Noor Muhammad Jamalluddin (2012) The Effect Of Aging Heat Treatment On Hardness And Mechanical Properties Of Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

K.M. Rajan, Rajes and Abdul Aziz, Mohd Zaidan Bin and T., Joseph Sahaya Anand (2012) ELECTROSYNTHESIZED NiS2 THIN FILMS AND THEIR CHARACTERIZATION STUDIES. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16, October 2012, Hotel Equatorial, Melaka.

Kamat, Seri Rahayu (2012) Strength Capabilities and Subjective Limit of Repetitive Manual Insertion Task. Scottish Journal of Arts, Social Sciences and Scientific Studies, 1 (6). pp. 2047-1278. ISSN 2047 - 1278

Kaswadinata, Mohd Arifin (2012) An Improved Optical Communication System Using Fiber Bragg Grating In EDWA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Swee Yen (2012) System Integration Of PV In Malaysia Distribution Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee , Swee Yen and Gan, Chin Kim (2012) IMPACT ASSESSMENT OF PV ON LOW-VOLTAGE DISTRIBUTION NETWORK. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Kejanindran, Govindarajoo (2012) Comparison On The Microstructure And Hardness Of GTA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kelvin, Theng Sern Lung (2012) A Study On 5 % And 10 % Bio-Blended Diesel Fuel Spray Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Ridza, Ramli (2012) Mechatronic System Educational Kit For Undergraduate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairun Nazihah , Khalid (2012) Corrosion Behavior Of TiAIBN, TiN And AIN Coating Produced By Magnetron Sputtering On Magnesium Substrate (Using Hank's Solution). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunisyahira, Abd Ghani (2012) Form 5 Biology Subject Content : 3D Animation Of Transpiration In Plants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairunnisak, Kamarozaman (2012) Design And Development Of Object Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khamis, Aziah (2012) PATTERN RECOGNITION OF ISLANDING DETECTION USING TT-TRANSFORM. In: International Conference on Engineering and Built Environment (ICEBE) 2012, 6-7 November 2012, Residence Hotel, Kajang.

Khamis, Aziah and H., Shareef and M.Z.C., Wanik (2012) PATTERN RECOGNITION OF ISLANDING DETECTION USING TT-TRANSFORM. Journal of Asian Scientific Research. pp. 607-613. ISSN 2223-1331

Kher, V.K. and Tan , Chee Fai and Sarban Singh, Ranjit Singh (2012) BUS ACCIDENTS PREVENTION WITH AN INTEGRATED STEERING SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4-5 April 2012, Melaka, Malaysia.

Kher, V.K. and Tan, CheeFai and Ranjit, S.S.S. (2012) BUS ACCIDENTS PREVENTION WITH AN INTEGRATED STEERING SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Kimberly, Anding (2012) Distribution Generation Installation Of Kuching International Airport. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kok, Swee Leong and Ab Rahman, Mohd Fauzi (2012) Design Considerations of MEMS Based Piezoelectric Cantilever for Harvesting Energy. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) 2012, 11 - 13 Dec 2012, Melaka.

Kok, Swee Leong and Qumrul, Ahsan and Chang, Siang Yee (2012) Thick-Film Based Piezoelectric Material Lead Zirconate Titanate (PZT) Performance Measurement Using Berlincourt Method. In: 4th International Conference On Solid State Science And Technology (ICSSST) 2012, 18 - 20 Dec 2012, Melaka.

Kong, Feng Yuan (2012) Synthesis Of Microwave Filter With Finite Dissipative Loss. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kong, Teck Long (2012) Design And Develop Wireless Type To Control The Vibration Motor For My 2nd Eye Extended. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kueh , Florence Hui Na (2012) Hardness Variation Of Heat Treated Layer-By-Layer Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Chin Seng (2012) Optimization Of Machining Parameters In Wire EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

khamis, alias (2012) Modeling and Simulation of Small Scale Microgrid System. Australian Journal of Basic and Applied Science, 6 (9). pp. 412-421. ISSN 1991-8178

L

Lai, Ching Huat (2012) Prototype Of Power Line Interface Socket Using Embedded Controller For Data Acquisition And Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lai , Chin Yang (2012) Poi Location Updater For Distance Calculation Using Google Map Services. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Larry Long, Yong Siang (2012) Effect Of Welding Current On Mechanical Properties Of Galvanized Chromided Steel Sheet In Resistance Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Saijod T.W. and Said, M. R. and Yaakob, Mohd Yuhazri (2012) On the effect of geometrical designs and failure modes in composite axial crushing: A literature review. Composite Structure, 94 (3). pp. 803-812. ISSN 0263-8223

Lee, Bi Cheng (2012) Accelerometer 3D Based Motion Computer Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kimbelle Mung Kim (2012) Positive Viral Videos. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Kian Seng (2012) Infineon Digital Library - Cataloging (IDLC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lem , Zhi Xian (2012) Assessment Of The Hand Grip Strength And Hand Injuries For UTeM Sportsperson. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lem , Zhi Xian (2012) Evaluation Of CMM's Uncertainty By Using Excel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Yoke Theng (2012) The Improvement And Optimization Of The Power Management Interfacing For PV System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Pay Jun and Yan , Jiwang and Masaki, Takeshi and Kuriyagawa, Tsunemoto (2012) Effect of Different Dielectric Fluids on Micro EDM of Low Conductivity Ceramic Material RB-SiC. Advanced Materials Research. pp. 529-534. ISSN 10226680

Lim, Chit Wooi (2012) Telemedicine System For Rural Clinic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Feng Sheng (2012) Generalized Chebyshev Microwave Filter For Wideband Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jia Qi (2012) Development Of Hydro-Atomized Spraying System For A Controlled Environment Aeroponic Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Choon Hiang (2012) The trompenaar's organizational cultural model and it's applicability within Malaysia setting in boosting employee engagement. Masters thesis, UTeM.

Lim, Sok Ming (2012) Blaster.A Attack Pattern Generalization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Sin Ni (2012) Intelligent Car Park System. Project Report. UTeM, Melaka. (Submitted)

Linus Michael, Stephen Mirando (2012) Comparison On The Microstructure And Hardness Of SMA Welding And GMA Welding Of Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liza, Ahamat Mahmod (2012) Improved Performance DC Motor Control Using A Unipolar Switching Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lizawati, Salahuddin and Norhidayah, Mohamad Yatim and Siti Amaniah, Mohd Chachuli (2012) Development Of Adaptive Segmentation Techniques For Analysis Of Medical Images. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Logan Raj, Lourdes Victor Raj (2012) Development Of Automatic Liquid Filling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Wui Foon (2012) Data Acquisition System For Air-Cond In Fke For Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ser Lee and Salleh, Shaharuddin and Sarmin, Nor Haniza (2012) Models Development for Single-Row Networks from Connected Graphs. Jurnal Teknologi, 57 (1). pp. 137-153. ISSN 0127-9696

Loh, Ser Lee and Salleh, Shaharuddin and Sarmin, Nor Haniza (2012) Partitioning technique for transforming perfect binary trees into single-row networks. Japan Journal of Industrial and Applied Mathematics, 29 (2). pp. 317-330. ISSN 0916-7005

Loi, Wei Cheong (2012) Regenerative Braking Systems (RBS): Energy Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loi, Wei Sen and Ong, Chee Tiong and Anwar Apandi, Nur Ilyana and Sakidin, Hamzah and Wasli, Chairulsyah (2012) APPLICATION OF FORCED NONLINEAR SCHRÖDINGER EQUATIONS IN OPTICAL FIBERS. In: 2nd Regional Conference on Applied and Engineering Mathematics (RCAEM-II), 30-31 May 2012, Eastern & Oriental Hotel, Penang.

Loo, Kin Hoe (2012) Six Sigma Dmaic Implementation At Manufacturing Company. Project Report. UTeM, Melaka Malaysia. (Submitted)

Low , Siew Yi (2012) Proposed A Metal-Oxide Surge Arrester Model To Improve Lightning Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luqman Hakim, Mohd Azam (2012) Development Of Folded Wheel For Disabled Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M., Zulkiflee and Yusof, Robiah and Abu, Nur Azman and Sahib, Shahrin (2012) Improvising intrusion detection for malware activities on dual-stack network environment. International Conference on Information Systems, Management and Evaluation (ICISME 2012), 6. pp. 537-542. ISSN -

M., Zainab and ABD RAZAK , JEEFFERIE and A.K. , Masrom and Rosli, Z. M. (2012) Effect of PEG Molecular Weight on the TiO2 Particle Structure and TiO2 Thin Films Properties. Advanced Materials Research , 364. pp. 76-80. ISSN 1662-8985

M. Almangush, Hamida and Abd Ghani, M. K. and Abugharsa, Ahmed Bashir (2012) A Novel Reversible Data Hiding Technique with High Capacity and Less Overhead Information. International Journal of Computer Applications , Volume (19). ISSN 0975-8887

M. Nasir, M. N. and Saharuddin, N. Z. and Yahaya, M. S and Jamri, M. S. and Ismail, I. (2012) STAND ALONE PHOTOVOLTAIC-WIND HYBRID SYSTEM FOR 100W MOTOR. In: Power and Energy Conversion Symposium (PECS 2012), 17 December 2012, Universiti Teknikal Malaysia Melaka.

M. Nasir, M. N. and Saharuddin, N. Z. and Yahaya, M. S and Jamri, M. S. and Ismail, I. (2012) STAND ALONE PHOTOVOLTAIC-WIND HYBRID SYSTEM FOR 100W MOTOR. In: Power and Energy Conversion Symposium (PECS 2012), 17 December 2012, Universiti Teknikal Malaysia Melaka.

M. R, Said and M.K., Ismail (2012) Experimental investigation of Paper Honeycomb subjected to quasi-static loading. In: International Conference on Engineering, Applied Sciences, and Technology, November 21 – 24, 2012, , Swissôtel Le Concorde, Bangkok, Thailand.

M.A., Burhanuddin and A.R., Ahmad and halawani, sami (2012) Maintenance Performance Indicators using Hybrid Models for Food Processing Industries. International Journal of Advancements Computer Technology, 4 (13). pp. 94-106. ISSN 100

M.A. Nur, Huda and Hyreil Anuar, Kasdirin and Mohd Ruddin, Ab Ghani (2012) Stability study of PD and PI controllers in multiple difference disturbances. In: -, 2012, -. (Submitted)

M.P. Azuwa, Azuwa and Ahmad, Rabiah and Sahib, Sharin (2012) Technical Security Metrics Model in Compliance with ISO/IEC 27001 Standard. International Journal of Cyber-Security and Digital Forensics, 1. pp. 280-288. ISSN 23050012

M.P. Azuwa, Azuwa and Ahmad, Rabiah and Sahib, Shahrin and Shamsuddin, Solahuddin (2012) Technical Security Metrics Model in Compliance with ISO/IEC 27001 Standard. The Society of Digital Information and Wireless Communication. ISSN 2305-0012

M.Y, YUHAZRI and A.M, HAIRUL EFFENDY and Y, JULIANA and A.S, RAHIM and M, NORAIHAM (2012) Study of CFRP Manufacturing Offcuts with Ssecondary Resin Impregnation via Hand Lay Up. In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and A.M, KAMARUL and A.H, RAHIMAH and HAERYIP, SIHOMBING and S.H, YAHAYA and K.F, SAMAT and R, IZAMSHAH (2012) Experimental Study on Effect of Reflector Bed Designs Heated by Direct Solar Radiation for Hot Water Storage System. In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and A.M, KAMARUL and S.H, YAHAYA and A.H, RAHIMAH and M.N, MASLAN and M, HAIRUL EFFENDY and HAERYIP, SIHOMBING (2012) Experimental Evaluation of Performance of Different Thermal Boxes Heated by Solar Radiation for Hot Water Storage System. In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and F.R, FAISAL and N.Z, SHARAFINA and A.M, HAIRUL EFFENDY and A.R, TOIBAH and S.T, RAHMAH and M.A, ASYADI AZAM and M, NORAIHAM (2012) Mechanical Properties of Polypropylene/Epoxidized Natural Rubber Blend via Mixing Ratio Analysis. In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and HAERYIP, SIHOMBING and S.H, YAHAYA and M.A, KAMELY and M.K, HANNAN (2012) The Measurement of Herzberg’ Employees Satisfaction using Kano Method. In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and L, ABDULLAH and Z, JAMALUDIN and T.H, CHIEW and N.A, RAFAN (2012) Extensive Tracking Performance Analysis of Classical Feedback Control for XY Stage Ballscrew Drive System. In: 4th International Conference on Mechanical and Electrical Technology , 26-26 JULY 2012, KL.

M.Y, YUHAZRI and M, NORAIHAM and A.M, HAIRUL EFFENDY and M.O, SHAHRIZAN and M, ANDANASTUTI and J.G, JAMEELAH and M, DAHLAN and A, HUSNA (2012) Regression Model of Processability Properties of Epoxidized Natural Rubber-Alumina Nanoparticle Composites (ENRAN) using Historical Data Design. In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

Mahfuzah, Md. Shukor (2012) Design A 3.5 Antenna For Dual Band Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mardiana, Bidin and Hanim, Abdul Razak and Haroon, Hazura and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) 2x2 Optical Switch Based on Silicon-On-Insulator Microring Resonator. Advanced Materials Research. pp. 531-534. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Active SOI Optical Ring Resonator Based on Free Carrier Injection. Advanced Materials Research , 403-40. pp. 758-761. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Performance of the Active Microring Resonator Based on SOI Rib Waveguide. Advanced Materials Research, 462. pp. 375-379. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Plasma Dispersion Effect for Various Doping Configuration on the SOI Phase Modulator with Trapezoidal Rib Waveguide. Advanced Materials Research, 403-40. pp. 4403-4407. ISSN 1662-8985

Mardiana, Bidin and Sahbudin, Saari and Menon, P.S and Haroon, Hazura and Hanim , Abdul Razak (2012) Effect of Doping Position on the Active Silicon-on-Insulator Micro-Ring Resonator Based on Free Carrier Injection. American Journal of Applied Sciences. pp. 1527-1533. ISSN 1546-9239

Mashirnani, mohd Tahir (2012) Fruit Sorting Based On Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maskana, Mamat (2012) Sistem Kawalan Adaptive PID Untuk Kenderaan Autonomi Berdasarkan Anggaran Gred Jalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maslan, Mohd Nazmin (2012) Identification and Control of a Piezoelectric Patch Actuator. In: Latest Advances in Systems Science and Computational Intelligence. WSEAS, pp. 204-209. ISBN 978-1-61804-094-7

Maslan, Mohd Nazmin (2012) Identification and Control of a Piezoelectric Bender Actuator. In: 2012 Third International Conference on Intelligent Systems Modelling and Simulation. IEEE, pp. 461-466. ISBN 978-1-4673-0886-1

Masni-Azian, Akiah and Toibah, Abd Rahim and Mohd Nazrin, Muhammad and Zuraida, Abdul Majid (2012) Preliminary Development of Abrader Tool for Paper De-Printing Apparatus using Taguchi Method. In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

Mat Yamin, Ahmad Kamal (2012) Pulsating Flow Studies in a Planar Wide-angled Diffuser Upstream of Automotive Catalyst Monoliths. PhD thesis, Coventry University.

Mat lazi, Jurifa and Ibrahim, Zulkifilie and Yusoff, Marianna and Mat Isa, Siti Noormiza and Mohd Yaacop, Nurazlin and Abu Hasim, Ahmad Shukri (2012) Sensorless Speed Control of Independent Dual-PMSM Drives Fed by a Five-Leg Inverter. Australian Journal of Basic and Applied Sciences. pp. 99-110. ISSN 1991-8178

Mazlan, Ahmad Mansor and Mohd Irman, Ramli (2012) Final Examination BTMU1162 Numerical Method 2011-12 Sem2 FTK. [Teaching Resource] (Submitted)

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Raja Abdullah, Raja Izamshah and Abu Bakar, Md Ali and Sivarao, Subramonian and HUSSEIN, NUR IZAN SYAHRIAH and Hussain, Mohamad Zaki (2012) Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part. In: The 28th International Conference Of The Polymer Processing Society (PPS-28), 11-15 December, Pattaya.

Md Ali, Mohd Amran and Raja, Izamshah and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Hussein, Nur Izan Syahriah (2012) Mechanical Properties of Polypropylene Composites Containing Polymer Fibers. In: International Conference on Design and Concurrent Engineering, iDECON2012. Universiti Teknikal Malaysia Melaka, pp. 239-242. ISBN 978-967-0257-16-7

Md Fahmi, Abd Samad and Abd Samad, Hasan Basari and Hishamuddin, Jamaluddin (2012) Development Of An Efficient Algorithm For Model Structure Selection In System Identification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ghazaly, Mariam (2012) Basic characteristics of a multilayer thin electrostatic actuator supported by lubricating oil for a fine-motion stage. Precision Engineering. pp. 77-83. ISSN doi:10.1016/j.precisioneng.2011.07.008

Md Ghazaly, Mariam (2012) Effect of Driving Signals on Motion Characteristics of Multilayer Electrostatic Actuator Supported by Only Lubricating Liquid. In: Proceedings of the 4th International Conference on Positioning Technology (ICPT2012), 2012 Nov , Kaohsiung, Taiwan.

Md Ghazaly, Mariam (2012) Friction Characteristic Switching Function and Ultra-Precision Positioning of Multilayer Electrostatic Actuator. In: 2012 JSPE Spring Meeting (2012), March 2012, Japan.

Md Ghazaly, Mariam (2012) Precision Vertical Fine Stage Using Multilayer Electrostatic Actuator Supported by Lubricating Liquids. In: 2012 JSPE Autumn Meeting (2012), September 2012, Japan.

Md Ghazaly , Mariam (2012) Driving Mode Control of A Multilayered Thin Electrostatic Actuator Supported By Lubricating Oil For Ultra-Precision Positioning. In: ASPE 2012 Summer Topical Meeting, 24 - 26 June 2012, California, USA.

Md Palil, Md Dan and Aaron Yu, L (2012) DESIGN AND ANALYSIS A NEW MATERIALS OF GASKET PIPPING USING WASTE RUBBER TYRES AND COCONUT COIR FIBRE. Advanced Manufacturing Technology, 6 (2). pp. 11-27. ISSN 1985-3157

Md Radzai, Fatimah (2012) CHARACTERIZATION STUDY OF SILVER TITANIUM DIOXIDE (AgTiO2) THIN FILM DEPOSITED ON VARIOUS SUBSTRATES VIA SOL-GEL TECHNIQUE. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Rozali, Sahazati and Rahmat, Mohd Fua'ad and Husain, Abdul Rashid (2012) Backstepping Design for Position Tracking Control of Nonlinear System. 2012 IEEE International Conference on Control System, Computing and Engineering. pp. 1-6. ISSN 978-1-4673-3141-8

Md Saat, Mohd Shakir (2012) CONTROLLER SYNTHESIS FOR POLYNOMIAL DISCRETE-TIME SYSTEMS. PhD thesis, The University of Auckland.

Md Saat, Mohd Shakir (2012) Robust H∞ static output feedback controller design for parameter dependent polynomial systems: An iterative sums of squares approach. Journal of The Franklin Institute. pp. 318-330. ISSN 0016-0032

Universiti Teknikal Malaysia Melaka (2012) Smart AC Fan with Sensor Application for Domestic Application. PI2012700699.

Universiti Teknikal Malaysia Melaka (2012) A system for alerting of a motion of a person. PI 2012003042.

Md Sani, Zamani and Noordin, Aminurrashid and Ab Rahman, Mohd Rahim (2012) FORGETMENOT (FMN) AN ANDROID APPLICATION FOR ALERTING USB USERS. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4-6, April 2012, Melaka, Malaysia. (Submitted)

Md Shah, Wahidah (2012) Localising Peers in P2P Live Streaming Systems Within Resource-Constrained Networks. In: INTERNATIONAL CONFERENCE ON COMPUTER & INFORMATION SCIENCES, 12 - 14 JUNE 2012, KUALA LUMPUR CONVENTION CENTRE.

Meor Said, Maizatul Alice and othman, mohd azlishah and Misran, Mohamad Harris and Sulaiman, Hamzah Asyrani and Ismail, Mohd Muzafar (2012) SHOPPING TROLLEY TRACKING SYSTEM VIA SMS USING ULTRA HIGH FREQUENCY APPLICATION. INTERNATIONAL JOURNAL OF EMERGING TRENDS & TECHNOLOGY IN COMPUTER SCIENCE (IJETTCS) . pp. 140-144. ISSN 2278 - 6856

Mhd Faiz, Mhd Fazil (2012) Merekabentuk Alat Pengira Solat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function and STEP-NC Data Model. In: International Conference on Flexible Automation and Intelligent Manufacturing, June 10-13, 2012, Helsinki, Finland.

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function Blocks and STEP-NC Data Model. In: 3rd International Conference on Design and Product Development (ICDPD 2012), December 29-31, 2012, Montreux, Switzerland.

Minhat, Mohamad (2012) Interoperable CNC Machine via Function Block and STEP-NC Data Model for Milling Operation. Applied Mechanics and Materials, 229-23. pp. 2365-2369. ISSN 1660-9336

Minhat, Mohamad (2012) Interoperable_CNC_Machine_via_Function_Block_and_STEP-NC_Data_Model_for_Milling_Operation. In: 4th International Conference on Mechanical and Electrical Technology , 26-26 JULY 2012, KL.

Mohamad, Norhidayah and Hoshino, Yasuo (2012) Japanese MNCs Investment Objectives and Subsidiary Performance. International Journal of Business and Management, 7 (19). pp. 132-148. ISSN 1833-3850

Mohamad, Effendi and Salleh, Mohd Rizal (2012) Simulation Study Towards Productivity Improvement for Assembly Line. Journal of Human Capital Development, 5 (2). pp. 59-69. ISSN 1985-7012

Mohamad, Norhidayah and Hoshino, Yasuo (2012) Survival and financial performance of Japanese subsidiaries in Malaysia and Thailand. Business and Management Review, Vol. 2. pp. 21-41. ISSN 2047 - 0398

Mohamad, Syahrul Hisham and Jaafar, Hazriq Izzuan (2012) Pembangunan Sumber Tenaga Yang Boleh Diperbaharui Mengikut Perspektif Islam. In: The 3RD National Conference Fiqh Science and Technology 2012 , 19/05/2012 - 20/05/2012, UTM Johor.

Mohamad Aiman, Md Kassim (2012) Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Amin, Abu Zaka (2012) Radio-Frequency Identification (RFID) Textile Tag Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ezwan, Yusoff (2012) A Small Scale Automatic Water System For Boiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Fahrurrofiq, Imam Fauzi (2012) Modelling And Validating Of Vehicle Longitudinal Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faris, Rahmat (2012) Performance Of VoIP In Wireless Multi-Hop Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdaus, Sukri and Yusmady, Mohamed Arifin and Aminurrashid, Noordin (2012) An Investigation of Energy Efficiency in UTeM's Industrial Campus Building Through Energy Management by Duty Cycling Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Isa, Mohd Sa'ari and Awang Md Isa, Azmi and Mohd Zin, Mohd Shahril Izuan and Mohd Johar, Fauzi and Zakaria, Zahriladha (2012) Antenna Beam Steering using Sectorized Square EBG. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 4 (1). pp. 39-44. ISSN 2180-1843

Mohamad Isa, Mohd Sa'ari and Awang Md Isa, Azmi and Mohd Zin, Mohd Shahril Izuan and Mohd Johar, Fauzi and Zakaria, Zahriladha (2012) Microstrip Patch Antenna Array Mutual Coupling Reduction using Capacitive Loaded Miniaturized EBG. Journal of Telecommunication, Electronic and Computer Engineering, 4 (2). pp. 27-34. ISSN 2180 - 1843

Mohamad Jamil, A Samad (2012) Wind Energy Charger For Rider (WECFR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nashrik, Suhaimy (2012) Development Of Automotive ECU And Ignition Wiring System Training Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shukri, Zakaria (2012) Boil-Off Gas Formation inside Large Scale Liquefied Natural Gas (LNG) Tank Based on Specific Parameters. Applied Mechanics and Materials, 229-231. pp. 690-694. ISSN 1660-9336

Mohamad Zahir, Zainudin and Asiah, Mohd Pilus and Isma Addi, Jumbri and Mohd Farid, Ismail and Mohd Nizam, Yusuf (2012) Faktor Ketidakupayaan Prestasi Akademik : Kajian Kes Pelajar UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zarul, Drahman (2012) Processability And Characteristic Of Thermoplastic Reinforced Comminution For Out Of Condition Aerospace Grade Carbon Fiber Prepreg Waste Via Melt Compounding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Aminuddin, Mai Mariam and Mustaffa, Izadora and Saipullah, Khairul Muzzammil (2012) Feasibility of N1-P2 Habituation to Differentiate Loudness Levels. In: International Conference on Biomedical Engineering (ICoBE 2012), 27-28 February 2012, Penang.

Mohammad Faiz, Yahani (2012) Microstructure Analysis On Heat Treated Carbon Steel Material Subjected To External Flame Heating Process (Due To Warpage Control). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fajar, Sariman (2012) Merekabentuk Dan Fabrikasi Casis Kerangka Ruang Kereta Lumba Elektrik Formula Varsity UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hanif, Mazlan (2012) Substrate Integrated Waveguide With Defected Ground Structure For Microwave Filter Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Mirza Anugerah, Kamsan (2012) Mobile Surveillance Robot Control By Android Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nasir, Mohd Zakaria and Dwijotomo, Abdurahman and ABDULLAH, Mohd Azman and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Hardware-in-the-loop Simulation for Automatic Rack and Pinion Steering System. Applied Mechanics and Materials, 229-231. pp. 2135-2139. ISSN 1660-9336

Mohammad Nasir, Mohd Zakaria and Amir, Mohd Zubir and Hudha, Khisbullah and ABDULLAH, Mohd Azman and Hassan, Muhammad Zahir (2012) MODELING AND VALIDATION OF SIX-BAR RACK AND PINION STEERING LINKAGE SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Mohammad Nasir, Mohd Zakaria and Dwijotomo, Abdurahman and Amir, Mohd Zubir and ABDULLAH, Mohd Azman and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Position Tracking of Automatic Rack and Pinion Steering Linkage System through Hardware in The Loop Testing. In: 2012 IEEE Control and System Graduate Research Colloquium (ICSGRC 2012). Proceedings of a meeting held 16-17 July 2012, Shah Alam, Selangor, Malaysia. (CFP120). Institute of Electrical and Electronics Engineers ( IEEE ), pp. 111-115. ISBN 9781467320344

Mohammad Nazri, Razali (2012) Resistivity Analysis In Layered Soils. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Rafi, Omar (2012) Merekeabentuk Dan Membangunkan Galah Komposit Ultra Ringan Untuk Tujuan Penuaiaan Buah Kelapa Sawit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syafiq, Ramli (2012) Merekabentuk Dan Menganalisis Rod Penghubung. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Imtiaz, Mohd Ibrahim (2012) IP Nation Located. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed Saeed, Jawad and Widad, Ismail and Badrul Hisham, Ahmad (2012) Cross-layer architecture of impulse-based ultra wideband to support the integration of Radio Frequency Identification and wireless sensor network infrastructures. Journal Computers and Electrical Engineering, 38 (4). pp. 1010-1022. ISSN ISSN:0045-7906

Mohan, Sinnappa (2012) An Analysis Of RF Radiation Exposure On Biological Pharmaceuticals For RF Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd, Othman * and Nanna , Suryanna and Sahib@Sahibuddin, Shahrin and Abdollah, Mohd Faizal and Selamat, Siti Rahayu (2012) Thresholding and Fuzzy Rule-Based Classification Approaches in Handling Mangrove Forest Mixed Pixel Problems Associated with in QuickBird Remote Sensing Image Analysis. International Journal of Agriculture and Forestry, 2 (6). pp. 300-306. ISSN 2165-882X

Mohd Ab. Halim, Mohd Firdaus and Yahaya, Muhammad Sharil and Ibrahim , Zulkifli and Hj Md Basar, Mohd Farriz and M. R., Sapiee and Ahmad, Suziana and Che Wan Mohd Zalani, Che Wan Mohd Faizal and Salim�, Fadzilah and Noordina, Aminurrashid and Ibrahim, Norliana (2012) Magnetic Levitation Training Kit for Teaching Basic Electrical Control System Courses. In: THE 3RD INTERNATIONAL CONFERENCE ON ENGINEERING & ICT (ICEI2012) , 4-6 april 2012, Melaka, Malaysia.

Mohd Abid, Mohd Asyadi Azam (2012) Direct growth of vertically aligned single-walled carbon nanotubes on conducting substrate and its electrochemical performance in ionic liquid. Physica Status Solidi A, 209 (11). pp. 2260-2266. ISSN 1862-6319

Mohd Abid, Mohd Asyadi Azam (2012) Thermoelectric and Electrochemical Properties of Highly Ordered Conducting Polymer/Carbon Nanotube Structures. In: 12th International Workshop on the Electrochemistry of Electroactive Materials (WEEM), 3-6 June 2012, Szeged, Hungary.

Mohd Adiran Aswad, Ismail (2012) Study And Design Of Robot Gripper Using SMA Actuator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adzhar, Saiman (2012) Design And Develop A Smart Auto Femasi System (Feeder Machine With Solar Integrate & Interface With GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Ibrahim (2012) Comparison Between Concentrating Solar Power And Photovoltaic For High Power Solar Energy Harvesting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizat, Zailan (2012) Modelling DC Motor Variables (Voltage, Torque, Efficiency) To Compare Between Nelder-Mead Method And Powell's Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Almirul, Halid (2012) Line Follower Robot With Proportional, Integral and Derivative Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ami, Ahmad Lawi (2012) Wireless Intelligence Home Security Integrated With Global System For Mobile (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aminuddin , Ibrahim (2012) Development Of Earth Leakage Circuit Breaker Auto Re-Close With Metering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amirul Faruqi, Ismail (2012) A Study On Current Carrying Capacity Of Double Layer PCB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Noordin, Aminurrashid and Ahmad, Suziana and Md Nawawi, Mohamad Riduwan (2012) DEVELOPMENT OF LOW COST PORTABLE ANTI-THEFT DEVICE (PATD). In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Noordin, Aminurrashid and Md Nawawi, Mohamad Riduwan (2012) PATD bantu cegah jenayah. Harian Metro. p. 1. ISSN 01711

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Noordin, Aminurrashid and Md Nawawi, Mohamad Riduwan (2012) PATD bantu tangani kes ragut. Sinar Harian. p. 1. ISSN 7/3/12

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Noordin, Aminurrashid and Md Nawawi, Mohamad Riduwan (2012) Tangani Kes Jenayah Ragut Penyelidik FTK UTeM Hasil Produk PATD. Melaka Hari Ini. p. 1. ISSN 23/2/12

Mohd Annuar, Khalil Azha and Yahaya, Muhammad Sharil and Che Hasan, Mohd Hanif and Ibrahim, Zulkifli and Mohamad, Syahrul Hisham and Mohd Ab Halim, Mohd Firdaus (2012) Asas dan Konsep Pengukuran. In: Asas dan Konsep Pengukuran. Penerbit UTeM, pp. 1-81.

Mohd Aras, Mohd Shahrieel and Ab Azis, Fadilah and Othman, Muhammad Nur (2012) A Low Cost 4 DOF Remotely Operated Underwater Vehicle Integrated With IMU and Pressure Sensor. 4th International Conference on Underwater System Technology: Theory and Applications 2012 (USYS'12). pp. 18-23. ISSN 978-983-43178-6-7

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Fara Ashikin , Ali and Syed Mohamad Shazali, Syed Abdul Hamid (2012) Study of the Effect in the Output Membership Function When Tuning a Fuzzy Logic Controller. In: IEEE International Conference on Control System, Computing and Engineering, 23-25 November 2012, Penang .

Mohd Aras, Mohd Shahrieel and Abdullah, Shahrum Shah and Shafei, Siti Saodah (2012) Investigation and Evaluation of Low cost Depth Sensor System Using Pressure Sensor for Unmanned Underwater Vehicle. Majlesi Journal of Electrical Engineering , Vol. 6 (No. 2).

Mohd Arif, Abu Hassan (2012) Analyzing Variables By Using Second-Order Model Of Response Surface Methodology (RSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ariff, Ahmad (2012) Analysis And Design Mechanism Of Supporting Cantas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asmuny, Mohamad (2012) Pembangunan Data Pengawasan Fotovoltan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Audi Aizat, Mohd Zim (2012) An Investigation Of Defects On Butt Joint Of Different Welding Technique Using Ultrasonic Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azhar, Ahmad (2012) Diagnosis Of Centrifugal Pump Failures Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azizi, Abd Aziz (2012) Design And Develop The Load Detail Calculation Software For Contruction Field. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Mohd Akhir (2012) Investigation Of Parameter That Affecting Air Flow Around Vehicle Frontal Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli, Salim (2012) Development Of Suppression System For Noise And Vibration In Automotive Flexible Wiper. Project Report. UTeM. (Submitted)

Mohd Azli, Salim (2012) Dynamic Analysis Of Laminated Rubber-Metal Spring On High-Rise Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlishah, Othman and I., Harrison (2012) 220GHz detection using 035 uM AMS mosfet as sub-THz detector Drain bias detraction. In: Third International Conference on Intelligent Systems Modelling and Simulation, 8-10 February, 2012, Le Meridien Hotel Kota Kinabalu, Malaysia. (Submitted)

Mohd Azrayie, Zainodin (2012) Fuzzy Logic In Position Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azri, Abu Bakar (2012) Analyzing Induction Motor Variables (Voltage, Torque & Efficiency) To Compare Between Nelder-Mead Method And Powell's Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwann, Zulkefle (2012) Design And Implementation Of A Low Cost Portable And Compact 2.4 GHz Spectrum Analyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Daud, Mohd Ahadlin (2012) Influence of Polymer Waste (Polyethylene Terephthalate) in Composites Structure Materials. European International Journal of Science and Technology, 1 (3). pp. 15-22. ISSN ISSN: 2304-9393

Mohd Daud, Mohd Ahadlin (2012) Plane Strain Fracture Toughness Determination for Magnesium Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 4 (2). pp. 45-51. ISSN 2180-1053

Mohd Esa, Mona Riza and Ahmad, Mohd Riduan and Cooray, Vernon (2012) Distinctive Features of Initial Breakdown Process Between Ground and Cloud Discharges. In: Asian Conference on Electrical Discharges (ACED), 10-12 December 2012, Johor Bahru Malaysia. (In Press)

Mohd Faisal, Harun (2012) A Study Of Fin In Arrays As A Heat Sink Of Motorcycle Thermoelectric Power Generator (MTEG). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal, Ghazali (2012) Application Palm Kernel Shell Charcoal In Steel Carburizing Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fakrol Radzi, Saipi (2012) Design And Develop Of Smart Traffic Light System For Emergency Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Lazzi, Zarin (2012) Study Of Dc Bus Instability With Constant Power Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariz Naim, Abdul Talib (2012) Basikal Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farris , Mohd Daud (2012) Reka Bentuk Dan Pembangunan Galah Teleskopik Pneumatic Bagi Penuaian Buah Kelapa Sawit Dengan Pemampat Udara Mudah Alih Dan Tiga Segmen Paip Aluminium Berlubang (Gred Marin). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Ab Aziz (2012) Diagnosing Rolling Element Bearing Failure Using Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad ‘Athif, Mohd Faudzi and Zool Hilmi, Ismail (2012) Identification And Non-Linear Control Strategy For Industrial Pneumatic Actuator. International Journal of the Physical Sciences, 7 (17). pp. 2565-2579. ISSN 1992-1950

Mohd Fuad, Mohammad Kasim (2012) Single Chip Solution For Vending Machine Controller Based On FPGA. Project Report. UTeM, Melaka. (Submitted)

Mohd Hafidzal, Mohd Hanafi (2012) Investigation Size Of Soot Particle Behaviour Using Biodiesel By Computational And Experimental Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Muhammad Som (2012) Wireless Housing Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizi, Ab Rahim (2012) Design And Development of Current Mode AC DC Switching Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizuddin, Samsudin (2012) Simulation Of Power Transmission Line Electric And Magnetic Field Exposure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizzie, Ramli (2012) Vehicles Accident Prevention System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizzol, Karim (2012) Designing And Fabrication Modular Products With The Incorporation Of DIY Assembly Method (Study Table). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizzudin, Ismail (2012) Performance Analysis On Multiphase Voltage Source Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmi, Md Salleh (2012) Analysis On CAD Data Obtained From Non-Contact Reverse Engineering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Helmie, Asnan (2012) Strategy For Milling Thin-Wall Low Rigidity Curve Shape Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hisanuddin, Zamharir (2012) Study On Lightning Protection For PV System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Husin, Mohd Haizal and Mohd Ridzuan, Nordin and Li, Jinli and Liew, Kong Yong and Chin, Sim Yee (2012) Copper containing SBA-15 prepared through pH modification method and its catalytic activity for N2O decomposition. Journal of South-Central University for Nationalities(Nat.Sci.Edition). pp. 1-7. ISSN 1672-4321

Mohd Ibrahim, Imran (2012) Wide Band Open Ended Air Gap RLSA Antenna at 5.8GHz Frequency Band. 2012 IEEE International Conference on Wireless Information Technology and System. pp. 1-4. ISSN 978-1-4673-0946-2/12

Mohd Khairi, Mohamed Nor and Okubo, Shigenori (2012) Fuzzy servo control of an inverted pendulum system. Artificial Life and Robotics. pp. 245-250. ISSN 1433-5298

Mohd Khairy, Abd Mutalib (2012) Development of Brush Lifting Gear for Slip Ring Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairy, Abd Mutalib (2012) Development of brush lifting gear for slip ring motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairy , Zahari and Badrul Hisham , Ahmad and Noor Azwan , Shairi and Peng Wen, Wong (2012) Reconfigurable Matched Bandstop Filter. In: 2011 IEEE INTERNATIONAL RF AND MICROWAVE CONFERENCE, 12-14 December 2012, Seremban, Negeri Sembilan.

Mohd Khanapi, Abd Ghani and Ika Novita , Dewi (2012) Comparing Speech Recognition and Text Writing in Recording Patient Health Records. In: Biomedical Engineering and Sciences (IECBES), 2012 IEEE EMBS, 17-19 December, Langkawi, Kedah Malaysia.

Mohd Khuzaimi, Mohd Salleh (2012) Processability And Compatibility Analysis Of Thermoplastic Elastomer Filled Reclaimed Rubber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Mustaqim, Othman (2012) Merekabentuk Dan Menganalisis Pancarongga Ekzos Seramik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muzafar, Ismail and Ahmad Sadhiqin, Mohd Isira and Siti Huzaimah, Husin and Zaiton, Abd Mutalib and Maizatul Alice, Meor Said (2012) Active Learning Approaches For Electronics Engineering Subjects. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Ali Mokhtar and Nik Syahrim , Nik Anwar and Mohd Nazrin , Muhammad and Masni Azian, Akiah and Saifudin Hafiz , Yahaya (2012) MOTION SYNTHESIS OF PLANAR FOUR LINKAGE MOVEMENT FOR PART FLIPPING APPLICATION. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Mohd Nashrol, Mohd Nawi (2012) Design And Ergonomics Analysis Of UTeM Bus Cockpit Arrangement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Mohamad Na'im and Saharuddin, Nur Zawani and Yahaya, Muhammad Sharil and Jamri , Mohd Saifuzam and Ismail, Irshad (2012) STAND ALONE PHOTOVOLTAIC-WIND HYBRID SYSTEM FOR 100W MOTOR. In: Power and Energy Conversion Symposium (PECS 2012), 17 December 2012, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Mohamad Na'im and Saharuddin, Nur Zawani and Yahaya, Muhammad Sharil and Jamri , Mohd Saifuzam and Ismail, Irshad (2012) Stand alone photovoltaic-wind hybrid system for 100w motor. In: Power and Energy Conversion Symposium (PECS 2012), 17 December 2012, Universiti Teknikal Malaysia Melaka.

Mohd Nasruddin, Zainudin (2012) Miniaturized Waveguide Slot Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawari, Mat Sudin (2012) Merekabentuk Dan Menganalisis Casis Kenderaan Hijau Untuk UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazrul, Othman (2012) Rekabentuk Dan Fabrikasi Sistem Stering Kereta Lumba Elektrik Formula Varsiti. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noor, helmy Adly and Shahbodin, F. and Chee Pee, naim (2012) Serious Game for Autism Children: Review of Literature. World Academy of Science, Engineering and Technology. pp. 647-652. ISSN 1307-6884

Mohd Noor, helmy Adly and Shahbodin, F. and Chee Pee, naim (2012) Serious Game for Autism Children: Review of Literature. In: International Conference on Computer Games, Multimedia, and Allied Technology, 11-13 April 2012, Venice, Italy. (Submitted)

Mohd Nor, Arfah Syahida and Abdullah, Shahrum Shah and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri (2012) Neural Network Predictive Control (NNPC) of a Deep Submergence Rescue Vehicle (DSRV). In: 4th International Conference on Underwater System Technology: Theory and Application 2012 (USYS'12), 4-6 December 2012, Shah Alam.

Mohd Nor, M.J. (2012) The Malaysian Experience: A New Approach in Managing Multi-Disciplinary Research Projects. The Academic Executive Brief , Volume 2 ( Issue 2). pp. 10-12. ISSN 2212-0424

Mohd Nor, M.J. and Ahmad, Rabiah (2012) The Great Researcher: Developing a New Breed of Researchers for the 21st Century. CREAM: Current Research in Malaysia, Vol. 1 ( No.1). pp. 5-20. ISSN ISSN 2231-3805

Mohd Nor Yuhalif, Yusoff (2012) Energy Meter Data Logging System With Real-Time Clock And KWH Readings. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Norazzim, Mohd Hashim (2012) New Cutter Design To Minimize Part Deflection In Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Rahim , Ab. Rahman (2012) Development Of A Forget Me Not (FMN) On Android Application By Using Bluetooth Communication To Securing Digital Data In Universal Serial Bus (USB) Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan, Abu Chik (2012) Fiber-Wireless Audio Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rosli, ZULKIFLI and Kwan, Wai Loon and Jariah, Mohamad Juoi and nafarizal, nayan and Zainab , Mahamud (2012) Effect of Grain Size on the Corrosion Behavior of TiAlBN Nanocomposite Coating. Solids and Structures (SAS). pp. 10-15. ISSN 2327-1728

Mohd Rosli, ZULKIFLI and Zainab , Mahamud and Jeefferie, Abd Razak and masrom, kadir (2012) Effect of PEG Molecular Weight on the TiO2 Particle Structure and TiO2 Thin Films Properties. Advanced Materials Research. pp. 76-80. ISSN 1022-6680

Mohd Rusdy , Yaacob and Yusuf Lada, Musa (2012) STUDY ON THE LOAD DISTRIBUTION BY A CHARGE CONTROLLER OF A PASSIVE SOLAR GREENHOUSE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Mohd Rusdy , Yaacob and Anuar , Mohamed Kassim and Nik Syahrim , Nik Anwar (2012) Effect of Glittering and Reflective Objects of Different Colors to the Output Voltage-Distance Characteristics of Sharp GP2D120 IR. ACEEE International Journal of Electrical and Power Engineering, 3 (2). pp. 6-10. ISSN ISSN 2158-7574 (Online) ISSN 2158-7566 (Print)

Mohd Rusdy , Yaacob and Nik Syahrim , Nik Anwar and Mohd Nazrin, Muhammad and Nurdiana , Nordin (2012) Effect of Distance on the Maximum Data Transfer for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. In: 2012 2nd International Conference on Electrical Engineering and Applications, 15 - 16 December 2012, Bali.

Mohd Saad, Norhashimah and Abdullah, Abdul Rahim (2012) Automated Region Growing for Segmentation of Brain Lesion in Diffusion-weighted MRI. In: International MultiConference of Engineers and Computer Scientists 2012, 14-16 March 2012, Hong Kong.

Mohd Saad, Norhashimah and Abdullah, Abdul Rahim (2012) Fully Automated Region Growing Segmentation of Brain Lesion in Diffusion-weighted MRI. IAENG International Journal of Computer Science, Vol. 39, 2012, 39 (2). pp. 155-164. ISSN 1819-9224 (online version); 1819-656X (print version)

Mohd Saat, Fatimah Al Zahrah and Yu, Zhibin and Jaworski, Artur (2012) CFD modelling of flow and heat transfer within the parallel plate heat exchanger in standing wave thermoacoustic system. In: 19th Internation Congress on Sound and Vibration, 8-12 July 2012, Vilnius, Lithuania.

Mohd Safuan, Anuar (2012) Development Of Hydroxyapatite/Chitosan Composite Powder Via Mechanical Milling Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahzudin, Saleh (2012) Design And Analysis Of Step Clamp Using Sand Casting And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shazwan , Suhaimi (2012) Mailbox Integrated With GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahrin Amri, Mohd Noh (2012) Real Time Study On Vehicle Tire Pressure. Project Report. UTeM. (Submitted)

Mohd Syazwan Naim, Mohamad Basir (2012) Modeling And Controller Design For An Active Car Suspension System Using Quater Car Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Warikh, Abd Rashid and Miron, Gakim and Zulkifli, Mohd Rosli and Mohd Asyadi 'Azam, Mohd Abid (2012) Formation of Cr23C6 During the Sensitization of AISI 304 Stainless Steel and its Effect to Pitting Corrosion. International Journal of Electrochemical Science (IJES), 7. pp. 9465-9477. ISSN 1452-3981

Mohd Yamin, Ahmad Hafizal (2012) Car Accident Warning Flare. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zafifi, Mustafa (2012) Study And Design Solar Tracker System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaidan, Abdul Aziz (2012) Electrosynthesised NiSe2 Thin Films For Photoelectrochemical (PEC) Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakwan, Mohd Razi (2012) Rekabentuk Dan Fabrikasi Pembuka Nat Tayar Kereta Pelbagai. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zuhair, Zulkarnain (2012) Thermal Analysis Of Lighweight Clutch Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zul Azri, Mohd Nizam (2012) Design And Deployment Of Wireless Multihop Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulhilmi, Ismail (2012) Appliction Of Value Stream Mapping (VSM) In Cable Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zulkefli, Selamat and Mohd Ahadlin, Mohd Daud and Wan Mohd Farid, Wan Mohamad (2012) Investigation On Electrical And Mechanical Properties Of Multi Filler And Talc Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moo, Yi Shan (2012) A Study On Independent Wheel Railway Bogie. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muda, A. K. (2012) Feature Extraction on Offline Handwritten Signature using PCA and LDA for Verification System. In: International Conference on Information Technology and Electrical Engineering, 12 July 2012, Yogyakarta, indonesi.

Muda, A. K. and Yun-Huoy, C. and Ahmad, S. (2012) Optimizing Feature Extraction using PSO-LDA for Face Recognition. Journal of Information Assurance and Security, 7. pp. 222-228. ISSN 1554-1010

Muhamad Farhan, Fadzilah Husani (2012) Design And Fabricate For Knuckle Racing Electric Car With High Performance And Realibility. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Fauzi, Ab Latip (2012) Design A Ballast Tank For Depth Control Underwater Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Nur Arif, Baharudin (2012) Design And Development Of A Three Phase Shunt Active Power Filter For Harmonics Reduction In Industrial Using Matlab, Simulink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad 'Ammar, Akop (2012) The Development Of 3D Visualization And Wireless Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad A'zim Hakim, Shaharbudin (2012) A Study On Current Carrying Capacity Of Single Layer PCB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Adly Fizree, Suhod (2012) Single Band Textile Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Afandi, Darwis (2012) Design And Development Of Pneumatic Mini Disc Oil Palm Fruit Stalk Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aiman Faiz , Mohd Yusof (2012) Smart Home Automation Using Voice Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aimi, Ikmal Samad (2012) The Study Of Data Acquisition System at FKM, UTeM Engine Dynamometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Al' Hafiz , Baharudin (2012) Intelligent Mobile Assistant (IMA) using mobile agent modeling. Project Report. UTeM. (Submitted)

Muhammad Amin, Dzulkifli (2012) Engine Performance And Emission Level Investigation Of Vehicle Running With Different Types Of RON Fuel Grades And Fuel Brands. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Amin, Ahmad Fairuz and Aris, Ishak (2012) Distributed Control Monitoring System Using Controller Area Network. In: Power and Energy Conversion Symposium (PECS 2012), 17th December 2012, Faculty of Electrical Engineering.

Muhammad Amirul Asyraf, Zoolkipli (2012) Path Tracking Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arham, Solahuddin (2012) Menganalisis Dan Mereka Bentuk Satu Peralatan Penjernihan Untuk Memisahkan Pepejal Terampai Di Dalam Sungai Yang Mana Sistem Penjernihan Ini Boleh Mencuci Kendiri Penapisnya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Arif, Pazil (2012) A Designation Of Hardware For Tour Guide Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asif, Md Yusof (2012) Warpage Control Due To Heat Treatment Process On Conventional Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asraf, Yusof (2012) Ferroresonance Analysis In Three Phase Voltage Transformer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf, Zulkefli (2012) Kenderaan Hijau PDRM : Ride And Handling Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf, Zulkepple (2012) Implementation Of Space Vector Pulse Width Modulation (SVPWM) For Three Phase Voltage Source Inverter Using Matlab Simulink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Awis Jamaluddin, Johari (2012) Develop A Prototype Of Autonomous Underwater Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faidhi, Zainal (2012) Mobile Phone Controlling Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faisal, Musa (2012) Development Of Differential Steering System For A Microcontroller Based Motorized Walking Aid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz , Mohd (2012) Physical Characterization Of Urea-Lignin Fertilizer Granule. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Farid, Mohd Daud (2012) Conversion Of Microwave To DC By Using Rectenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Duanam (2012) Development Of Wireless Viral Advertisement System For Land Public Transportation Via Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus, Mohd Razali (2012) Kajian Parameter Terbaik Untuk Robot Kimpalan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Giffari Redha, Ramli (2012) Implementation Of Block Matching Algorithm Based On Hexagon Shape Search Pattern For Motion Estimation In Video Coding Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haffizzuddin, Ammin Sabda (2012) Merekabentuk Dan Fabrikasi Pengutip Bola Golf Konsep Hijau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haffizzuddin Ammin, Sabda (2012) Merekabentuk Dan Fabrikasi Pengutip Bola Golf Konsep Hijau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizuddin, Che Harun (2012) Mereka Bentuk Galah Pemetik Dan Pemotong Buah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanif, Mohd Zanani (2012) Design And Development Of Recreational Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hasbi, Baharuddin (2012) A study on automated self-ordering menu using the lens of technology acceptance model : a focus on Klang Valley Restaurant. Masters thesis, UTeM.

Muhammad Hazwan Hakim, Almi (2012) Klaska Web Page Management System (KWMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ikhtiaruddin, Afandi (2012) Merekabentuk Dan Membangunkan Struktur Kerangka Skuter Imbangan Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Ab Halim (2012) GUI Development of Solar Energy Flow for Stand Alone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Abd Halim (2012) Heat Transfer Characteritic Of An Evaporator With CuO Refrigerant Based Nanofluids As Working Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Abd. Halim (2012) Heat Transfer Characteristic Of An Evaporator With Cuo Refrigerant Based Nanofluids As Working fluids. Project Report. UTeM, Melaka. (Submitted)

Muhammad Jazli Aiman, Abd Rahim (2012) PID Controller Design With Different Tuning Methods. Project Report. UTeM, Melaka. (Submitted)

Muhammad Rahimi, Ismail (2012) Design And Develop Pool Cleaning Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ridhwan, Mohd Talib (2012) Studies On Dynamic Behaviour Of The Automotive Door Locking System During Impact. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Sadiq, Suhaimi (2012) Analysis Of Back-Flashover Rate For 132 KV Overhead Transmission Lines. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Safie, Rosli (2012) Design And Development Of Remotely Operated Vehicle (ROV) Thrusters For Shallow Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shalihin, Aris (2012) Off Grid Building System Using Solatube And Wind Energy For Small Scale Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Abdullah Shatri (2012) Computer Aided Vision Therary For Visually Impraired People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syamil, Zaini (2012) Automatic Throttle Body Control Using Pid Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Taufik, Abdul Aziz (2012) Electronics Stability Program (ESP) Of The Automotive Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yazuan , Yaakup (2012) Physical Characterization Of Urea Binder Extrude At Various Weight Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zaid, Hasani (2012) Wireless Server Room Temperature System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zaid, Saleh (2012) Tool Path Compensation Strategy For Machining Thin Wall Low Rigidity Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zhariff Izwan, Mohd Suhaimi (2012) Kajian Pengesanan Dilaminasi Pada Struktur Bahan Komposit Menggunakan Kaedah Masa, Frekuensi Dan Masa Frekuensi-. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulfadhli Akmal, Subari (2012) An Application Of Tour Guide Robot Via Shape Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulhelmi, Saidul Badri (2012) Hotspot Wifi System Using Radius Server And Distributed Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Syahmi, Muhd Rusli (2012) Public Transport State Monitoring System Using GSM And GPS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Zharif Rifqi, Zuber Ahmadi (2012) Direct Torque Control Of Induction Motor Drive. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa , Juman (2012) STUDY ON MACHINE PERFORMANCE FOR PRODUCTIVITY IMPROVEMENT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muslim, Z. and Yusof, R. and Abu, N. A. and Sahib, S. (2012) Improvising Intrusion Detection for Malware Activities on Dual-Stack Network Environment. In: WORLD ACADEMY OF SCIENCE, ENGINEERING AND TECHNOLOGY , July 2012, Stockholm, Sweden.

Mustafa, Zamir (2012) Development Of Submerge Pump Experimental Rig To Measure Pump Performance For Educational Experimentation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Zaleha B. and Tanner, K.E (2012) Composites for hard tissue repair. In: Wiley Encyclopedia of Composites. John Wiley & Sons, Inc., pp. 1-14.

Mustaffa Albakri, Ammar Alfaiz and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah and Rusnandi, Herdy and Mohd Adrinata, Shaharuzaman and Mansor, Muhd Ridzuan (2012) Design and Development of UTeM Perodua Eco-challenge Vehicle. Applied Mechanics and Materials, 165. pp. 202-208. ISSN 1660-9336

Musthafah, Mohd Tahir and Yusmady, Mohamed Arifin and Safarudin Gazali , Herawan and Muhammad Zahir, Hassan and Mohd Azli , Salim and Muhamad Syahir, Ali and Abdul Muhaimin , Mohd Shafie (2012) Design And Setup Of Low Cost Small Engine Dynamometer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

mohd zamzuri, abdul rashid and Mohd Aras, Mohd Shahrieel and Anuar , Mohamed Kassim and Annisa , Jamali (2012) Development of Hexapod Robot with Manoeuvrable Wheel. International Journal of Advanced Science and Technology, 49. pp. 119-136. ISSN 2005-4238

motlagh, o. and tang, s.h. and khaksar, w. and ismail, n. (2012) An Alternative Approach to FCM Activation for Modeling Dynamic Systems. journal of applied artificial intelligence. xx-xx. ISSN xxxx-xxxx

N

N.H., Ali and Zahriladha, Zakaria and R. , Phudpong (2012) Design of frequency selective limiting circuit. In: 3nd International Conference on Engineering and ICT (ICE12012), 4 - 6 April 2012, Melaka Malaysia. (Submitted)

N.M., Yaakop and Zulkifilie, Ibrahim and Md Hairul Nizam , Talib (2012) Speed performance of space vector pulse width modulation direct torque for five leg inverter served dual three-phase induction motor. In: 2012 Ieee International Power Engineering and Optimization Conference (PEDCO) Melaka, Malaysia, 6-7 June 2012, Melaka. (Submitted)

NORDDIN, NURBAHIRAH and Abdullah, Abdul Rahim and Zainal Abidin, Nur Qamarina and Aman, Aminudin (2012) LEAKAGE CURRENT ANALYSIS OF POLYMERIC INSULATION USING LINEAR TIME FREQUENCY DISTRIBUTION. In: The Power and Energy Conversion Symposium (PECS 2012), 07/12/2012, UTEM.

Nadiah, Daud (2012) Smart Traveller Language Translator And Halal Ingredients Detection Using Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najmiah Radiah, Mohamad and Chau, Man Siang and Ahmad Sadhiqin, Mohd Isira and Adie, Mohd Khafe and Azahari, Salleh and Nur Fatihah, Azmi (2012) Electromagnetic levitator. In: l'nternational Conference on Computer and Communication Engineering (ICCCE 2012), 3-5 July 2012, Kuala Lumpur, Malaysia. (Submitted)

Nanna Suryana, Herman and Burairah, Hussin (2012) Integrated Features by Administering the Support Vector Machine of Translational Initiations Sites in Alternative Polymorphic Context. International Journal Bioautomation, 16 (1). pp. 13-22. ISSN 1314-2321

Nazran, Ahmad Sufian (2012) Merekabentuk Dan Menganalisis Jisim Optimum Pada Kawalan Lengan Atas. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazrulazhar , Bahaman and Abdollah, M. F. and Mas'ud, M. Z. and Anton Satria, Prabuwono (2012) Effectiveness of Security Tools to Anomalies on Tunneled Traffic. Information Technology Journal. pp. 191-199. ISSN 1812-5638

Nazrulazhar , Bahaman and Anton Satria, Prabuwono and Mohd Zaki, Mas'ud and Mohd Faizal, Abdollah (2012) Effectiveness of security tools to anomalies on tunneled traffic. Information Technology Journal, 11 (2). pp. 191-199. ISSN 1812-5638 (Submitted)

Nermie, Dickson (2012) The Effect Of Primary Relief Angle To The Dimensional Surface Error Of Thin-Wall Components. Project Report. UTeM, Melaka. (Submitted)

Ng, Woon Cea (2012) GSM & GPS Based School Kids Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Ke Voon (2012) Sit To Stand Motion Algorithm Of Nao Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngiow, Shin Nian (2012) Influence Of Consumable And Current Towards Mechanical Properties On Arc Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nicholas Lian, Ak Mujah (2012) Heat Transfer Charactericstic Of A Condenser With AI203 Refrigerant Based Nanofluids As Working Fluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Aimir, Nik Yahya (2012) Heart Rate Variability Analysis System In Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Muhammad Faiz, Mustaffar Bakri (2012) Kajian ke Atas Kecekapan Menara Penyejukan Dengan Percampuran Bahan Kimia Etilena Glikol Ke Dalam Cecair Ejen Penyejukan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Munaji, Nik Mahadi (2012) Modeling Variables By Using Blocking Of Response Surface Methodology (RSM). Project Report. UTeM, Melaka. (Submitted)

Nik Nurfathi Nadia, Nik Mustaffa (2012) Tool Wear Prediction By Measuring Cutting Force. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Syahrim , Nik Anwar and Anuar , Mohamed Kassim and Mohammad Fahmi , Miskon and Mohd Rusdy , Yaacob (2012) ORIENTATION TRACKING WITH MEMS INERTIAL SENSORS. In: International Conference on Engineering and ICT , 4-6 April 2012, Melaka.

Nik Syazwi, Nik Mansor (2012) Smartphone Based Heartbeat Viewer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Zubaidi, Nik Mahmood (2012) Designing And Fabrication Modular Products With The Incorporation Of Diy Assembly Method (Shoe Rack). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Adibah, Mat Isa (2012) The Effect Of Phenolic Resin And Hardener Percentage On Mechanical Properties And Loss On Ignition Resin Bonded Sand Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Atiqah, Azali (2012) Geometry Discretization Optimization For Field Modelling Of Inset PMSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azam, Ahmad Faiz and Manap, Mustafa and Jidin , Auzani and Bahari, Norhazilina and JOPRI, MOHD HATTA and Abdullah, Abdul Rahim (2012) TORQUE HYSTERESIS CONTROLLER FOR BRUSHLESS DC MOTOR DRIVES. In: The Power and Energy Conversion Symposium (PECS 2012), 07/12/2012, UTEM.

Noor Azila, Amat Puadi (2012) Investigation Of Multiwavelength For Multi Frequency Range Optical Laser Driver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azilah , Muda and Norashikin , Ahmad and Sabrina , Ahmad and Noor Azilah , Draman (2012) Investigation On Music Feature Representations For Data Retrieval. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azlin, Bidin and Normah, Mustaffa (2012) Blogosphere: How Youth Perceived Blogs Credibility. Malaysian Journal of Communication. pp. 33-54. ISSN 0128-1496

Noor Azlin, Zainal Abidin (2012) Development Of Optimal Photosensors Based Heart Pulse Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azwan, Shairi (2012) Adjacent channel rejection analysis due to channel select filter in RF superheterodyne receiver of WLAN IEEE 802.11a. In: Research and Development (SCOReD), 2012 IEEE Student Conference on , 5-6 Dec 2012, Pulau Pinang .

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Peng Wen, Wong (2012) The potential application of switchable matched parallel-coupled stub resonator in SPDT discrete switch design. In: Applied Electromagnetics (APACE), 2012 IEEE Asia-Pacific Conference on , 11-13 Dec 2012, Melaka.

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Zahriladha, Zakaria and Peng Wen, Wong (2012) Isolation improvement of SPDT discrete switch with single switchable open stub resonator at 2 GHz band. In: Wireless Technology and Applications (ISWTA), 2012 IEEE Symposium on, 23-26 Sept 2012, Bandung, Indonesia.

Noor Azwan , Shairi and Badrul Hisham, Ahmad and Zahriladha, Zakaria and Peng Wen, Wong (2012) Single Pole Double Throw Discrete PIN Diode Switch with Switchable Quater Wave Stub Resonator. In: 2012 International Conference on Communications and Mobile, 21-23 May 2012, Guilin, China.

Noor Baiduri, Abd Halim and Nordayana Izyan, Ahmad Ahsan and Fudhail, Abdul Munir (2012) Writing Final Year Project Report in English: Problems, Motivating and Hindering Factors among UTeM Final Year Engineering Students. Asian Social Science, 8 (1). pp. 27-32. ISSN 1911-2017

Noor Fakhrezah, Matdiris (2012) Experimental Study Of Femur Bone Under Normal Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Faridah , Amat (2012) Smart Bicycle Rider Coach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hasina, Ali (2012) Implementation Of Direct Torque Control Of Induction Machine Utilizing Digital Signal Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hasriq, Mohammad (2012) Konsistensi Penjana Titisan Dalam Menghasilkan Saiz Dan Selang Masa Titisan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Rawaida , Omar (2012) Redesign Of Perforator Through Integration Of Ergonomics Approach And Quality Function Deployment (QFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Shahida , Mohd Kasim and Siti Rosmaniza , Ab Rashid and Chairulsyah, Wasli (2012) An Improved Optical Communication System Using Fiber Bragg Grating In Edwa. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noorain, Abdullah Sani (2012) Development Of Power Electronics Learning Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noordin, A. and Salim, M.A. and M. R., Sapiee and Sabikanee, S. and Hasan, M.H.C. and Md. Sani, Z. and Othman, M.H. (2012) Development of a Quadruped Crawling Robot Prototype. In: THE 3RD INTERNATIONAL CONFERENCE ON ENGINEERING & ICT (ICEI2012), 4-5 April 2012, Melaka.

Noordin, Aminurrashid and Salim, Mohd Azli and M. R., Sapiee and Che Hasan, Mohd Hanif and Sabikan, Sulaiman and Othman, Mohd Hafifi (2012) DEVELOPMENT OF A QUADRUPED CRAWLING ROBOT PROTOTYPE. In: 3rd International Conference on Engineering and ICT (ICEI2012).

Nor Adilia , Abd Latif (2012) Curves And Surface Modeling : A Case Of Truck Wind Deflector Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Afifah, Zakaria (2012) Mathematical Modelling Of Neill Mapping Function For Global Posittion System (GPS) Tropospheric Delay. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Amirah, Mohd Aminuddin (2012) Lock And Key Mechanism In Enzyme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azizah, Mohd Yusoff (2012) New Hepwm Optimization In Three Ohase Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azreen, Othman (2012) Development Of Prototype Neutral-Less Occupancy Time Lag Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azwadi Che Sidik, N.A.C Sidik and Fudhail Abdul Munir, F.A. Munir (2012) Mesoscale Numerical Prediction of FLuid FLow in a Shear Driven Cavity. Arabian Journal for Science and Engineering, 37 (6). pp. 1723-1735. ISSN 13198025

Nor Haslinda, Ismail and Chip, Wai Yein (2012) Intelligent Features of Mobile Health Encyclopedia Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Syazwani, Mohd Said (2012) Performance Analysis Of Wireless Optical Broadband Access Network (WOBAN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norafidah, Rusli (2012) Automatic Switch Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraidah, Ahmad (2012) Inhomogenous Color Object Recognition Using Monochromatic-Based Technique With Color Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norain , Ismail and Ahmad Shamsul , Abd Aziz and Sazelin , Arif (2012) Commercialisation Of Intelectual Property Rights In The Malaysian Technical University Network (MTUN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noraisah, Abu (2012) Micro Wind Power Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noramin, Ab. Jalil (2012) Shuttlecock Launcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norana, Hassim (2012) Multiplier Wheel Nut Wrench. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazira, A Jalil (2012) Constraint Optimization For Nurse Rostering Using Particle Swarm Optimization With Global Optimum Test Function. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfaisya, Ahmad Saibi (2012) Mobile Game Indoor Air Quality (IAQ) 2D Mobile Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfaridatul Akmaliah, Othman and Md Nor Hayati, Tahir and Mukhiffun, Mukapit and Isma Addi, Jumbri (2012) The Complexity of Construction Supply Chain and Its Influence on Safety Management Systems Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norfaridatul Akmaliah, Othman and Aryani, Ahmad Latiff and Juhaini, Jabar (2012) The impact of construction supply chain on the implementation of safety management systems. Journal of Techno Social. pp. 1-9. ISSN 2229-8940 (In Press)

Norhazwani, Md Yunos and Ganagambegai, Laxamanan and Salleh , Yahya (2012) A Tabu Search Approach For Travelling Malacca Tourism Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah, Ramli (2012) Programmable Socket Using Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhidayah , Hashim (2012) Design and analysis of deep drawing die for brass socket by using finite element analysis. Project Report. UTeM, Melaka. (Submitted)

Norhuda, Othman (2012) Iris Recognition System Using Histogram Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norida, Abdullah (2012) Modul Kejurulatihan Kursus Kokurikulum Berkredit Teras Kepimpinan. 1, 1 (1). Majlis Kokurikulum Univerisiti-univeriti Malaysia (UniCC), Kuala Lumpur. ISBN 978-967-0334-29-5

Norida, Abdullah (2012) Modul Kejurulatihan Kursus Kokurikulum Berkredit Teras Pengucapan Awam. 1, 1 (1). Majlis Kokurikulum Univerisiti-univeriti Malaysia (UniCC), Kuala Lumpur. ISBN 978-967-0334-31-8

Norida, Abdullah (2012) Modul Kejurulatihan kursus Kokurikulum Berkredit Teras Kesukarelawanan. 1, 1 (1). Majlis kokurikulum universiti-univeriti Malaysia, Kuala Lumpur. ISBN 978-967-0334-30-1

Norida, Abdullah (2012) Modul kejurulatihan Kursus Kokurikulum berkredit : Teras Daya Usaha dan Inovasi. 1, 1 (1). Majlis Kokurikulum Univerisiti-univeriti Malaysia (UniCC), Kuala Lumpur. ISBN 978-967-0334-32-5

Norizan, Mahmud (2012) Mnemonic Code To Ladder Diagram Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norlezah, Hashim and Chairulsyah, Wasli and Abd Shukur, Ja'afar and Ahmad Sayuthi, Mohamad Shokri and Zulkifli, Shariff (2012) Development Of Fiber Optic Roughnes Measuring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norlida, Ramli (2012) Optical Solitons In Long Haul Telecommunications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Normaizatul Nabila, Zakari (2012) Anti-Theft Alarm System Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nornajihah , Ismail (2012) Solar Powered Personal Dryer Using Pic (Ecodryer). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nornikman, Hassan and Badrul Hisham, Ahmad and Mohamad Zoinol Abidin, Abd Aziz and F., Malek and Imran , Hindustan and Abdul Rani, Othman (2012) STUDY AND SIMULATION OF AN EDGE COUPLE SPLIT RING RESONATOR (EC-SRR) ON TRUNCATED PYRAMIDAL MICROWAVE ABSORBER. Progress In Electromagnetics Research, , 127. pp. 319-334.

Nornikman, H and Othman, A. R. and Ahmad, B. H. and Abd Aziz, M. Z. A. (2012) Effect of Single Complimentary Split Ring Resonator Structure on Microstrip Patch Antenna Design. In: 2012 IEEE Symposium on Wireless Technology & Applications(ISWTA 2012), 23-26 September 2012, Bandung.

Nornikman, H and Ahmad, B. H. and Othman, A.R and Kamarudin, M. R. and Abdul Aziz, M. Z. A. (2012) Effect of Spiral Split Ring Resonator (S-SRR)structure on Truncated Pyramidal Microwave Absorber Design. In: Proceedings of ISAP2012, Nagoya, Japan., Nov 2012, Nagoya.

Norsarinasari, Md Isa (2012) Pengawal Pengesan Titik Kuasa Maksimum (Mppt). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsuhaidah, Arshad (2012) Multiplex Switching System For Single Phase Electrical Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsuhaini , Ahmad Razi (2012) Development Of Packet Extrator Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur 'Ain, Azmi (2012) Design And Fabricationn Madular Product With The Incorprotion Of Diy Assembly Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aishah, Zainuddin (2012) Design Of Slotted Meander Line Antenna With Probe Feed Method For ISM Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asima, Mohammad Nasir (2012) Design And Characterization Of Vertical MOSFET. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Asyrani, Mohd Asari (2012) Performance Analysis Of Wireless Multi-Hop Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atikah , Md. Nor (2012) Impact Of Weather On Short Term Load Forecasting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Atiqah, Shahari (2012) Simulation Of Air Flow Around A Vehicle Side Mirror. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hazirah, Mohamad Nasir (2012) Application Of Value Stream Mapping In The Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Idayu, Ibharim (2012) Investigation Of Microwave Photonic (RF-Optical)Optical Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izzati Liyana, Muhamad Mazlan (2012) Flood Forecasting Application System By Using Dempster Shafer Theory Of Evidence. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadia Ramadhani, Md yusuf (2012) Production Operating System A Case Study Of Make To Stock And Make To Order System. Project Report. UTeM, Melaka Malaysia. (Submitted)

Nur Nadiah, Mamat (2012) Car Engine Vibration Based Micro-Power Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sumayyah, Ahmad (2012) Solar Farm Power Distribution Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syawana, Murad (2012) Fuzzy Logic Controller For Active-Vehicle Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Yashidar , Mohamad Yasin (2012) The Design And Analysis Of CMOS Pin-Photodiode For Opto-Fluidic Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Zatul 'Iffah, Zakwa (2012) Design Microstrip Bandpass Filter For WiMAX System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurain Shyafina, Ab Latif (2012) Kajian Penjanaan Semula Tenaga Melalui Sistem Suspensi Kenderaan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurbalqis, Yusoff (2012) Nutrient Fact Processing Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfaezah, Abdullah (2012) Modeling And Control Stand Alone PV System Using Voltage Mode Control DC Converter Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurfaizey , Abdul Hamid and Stanger, Jonathan and Tucker, Nick and Buunk, Neil and Wallace, Andrew and Staiger, Mark (2012) Manipulation of electrospun fibres in flight: the principle of superposition of electric fields as a control method. Journal of Materials Science, 47 (3). pp. 1156-1163. ISSN 1573-4803

Nurfaizey , Abdul Hamid and Tucker, Nick and Stanger, Jonathan and Staiger, Mark (2012) Functional nanofibers in clothing for protection against chemical and biological hazards. In: Functional nanofibers and their applications. Woodhead Publishing, pp. 236-261. ISBN 978-0-85709-069-0

Nurlina Aimi, Ramily (2012) Development Of Physics Learning Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Aqilah, Azmi (2012) Developing An Edu-Tainment Program For Standard One In Topic Animal With The Conjunction Of Kinect Xbox360. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Dianna Soffia, Imran (2012) PIC-Based Carbon Monoxide Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hanis, Shahbudin (2012) GSM Control For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hilwa , Mohd Zini (2012) Identification Of Surface And Sub-Surface Defects In Gear By Using Thermographic Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nadirah, Mohamad Khairi (2012) Automatic Measurement Of Fuel Level For Petrol Station Using A Ping Ultrasonic Ensor And Kalman Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Syazwani , Sabran (2012) A Remote Hand For OKU. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Zarirah, Nizam (2012) Factors Influencing Customer's Decision To Buy Green Product Design In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nusaibah, Mansor and Siti Norbaya, Yahaya and Nurul Zarirah, Nizam and Othman, Aman (2012) Consumers Acceptance Towards Green Technology in Automotive Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

nurul Syuhada, Che Hussin (2012) Implimentation Of Poka Yoke Through DFMEA Stage For Sme Industry In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

OMAR, ROSLI (2012) New Configuration of a Three Phase Dynamic Voltage Restorer (DVR) for Voltage Disturbances Mitigation in Electrical Distribution System. Arabian Journal for Science and Engineering, 37 (8). pp. 2205-2220. ISSN 1319-8025

OMAR, ROSLI (2012) Voltage unbalanced compensation using dynamic voltage restorer based on supercapacitor. Electrical Power and Energy Systems, 43. pp. 573-581. ISSN 0142-0615

Omar, M.Khaled and Abdullah, Rohana and Abd. Rahman, Md. Nizam (2012) Process and Labour Utilization in The Electronic Industry: A Simulation Approach. In: 6th IEEE International Conference on Management of Innovation and Technology, 10-14 Jun 2012, Sanur, Bali, Indonesia.

Omar, Nooririnah and Abdullah, Rohana (2012) Supersonic particle deposition as potential corrosion treatment method for helicopter part in Malaysia. International journal of advanced research in engineering and technology, 3 (2). pp. 275-279. ISSN 09766480

Omar Alsidieg, Musa (2012) Analysis on consumer behavior when purchasing cell phones. Masters thesis, UTeM.

Ong, Jia Qing (2012) Colour And Size Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Khai Kher (2012) Designing And Implementation Of Wi-Tricity System Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Yang Hooi (2012) Study Of Flow Pattern And Pressure Distribution In Journal Bearing For Different Groove Type Using CFD. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Oon, Cee Xian (2012) Intelligent Parking Management System (IPMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Abdullatif Jussab (2012) The Minimization Of 57.5 GHZ Chebyshev Band Pass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, A.R and Ibrahim , A.B and Husain, M.N and Johal , M.S and A.Rashid , K.A and Saad, M.M (2012) Design and Fabrication of Radio Frequency Amplifier with 3 dB π-Network Attenuator Isolation. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11-13 December 2012, Melaka.

Othman, Aman and Albert Feisal@Muhd Feisal, Ismail and Nurul Zarirah, Nizam and Nusaibah, Mansor (2012) Green Technology Tourism Innovation On Quality Of Life Of Sungai Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, M.A. and Othman, A.R. and A.Aziz, M.Z.A. and Saysoo, N. (2012) Development of Ultra-Wideband (UWB)Horn Antenna Using Approximation Method. In: 2012 IEEE Symposium on Wireless Technology and Application (ISWTA), 23-26 September 2012, Bandung.

Othman, Mohd Azlishah and M.Napiah, Zul Atfyi Fauzan and Ismail, Mohd Muzafar and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Meor Said, Maizatul Alice (2012) I-V Characteristic at Different Depletion Region for CMOS PN Photodiode for Optical Communication Applications. In: The 3rd International Conference on Integrated Circuits and Devices in Vietnam (ICDV 2012), August 13-15, 2012, Danang, Vietnam.

Othman, Mohd Azlishah and Mohammed Napiah, Zul Atfyi Fauzan and Ismail, Mohd Muzafar and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Meor Said, Maizatul Alice (2012) An Investigation on I-V Characteristic for CMOS PIN Photodiode: Variable I-Layer. In: The 3rd International Conference on Integrated Circuits and Devices in Vietnam (ICDV 2012), August 13-15, 2012, Danang, Vietnam.

Othman , A.R and Ibrahim , A.B and Husain , M.N and Ahmad , M.T and Senon , M. (2012) High Gain, Low Noise Cascode LNA Using T-Matching Network for Wireless Applications. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11- 13 December 2012, Melaka.

Othman , A.R and Abd Aziz , A. A and Pongot. , K and Shairi , N. A and Mohd Nor, M.N (2012) Design and Sensitivity Analysis of Direct Conversion RF Receiver for IEEE 802.11a WLAN System at 5.8 GHz Frequency. In: 2012 IEEE Student Conference on Research and Development, 5 – 6 December 2012, Parkroyal Resort Hotel, Penang,.

Othman , A.R and Ibrahim, A.B and Husain, M.N and Hamidon A.H, A.H and Hamidon , Jsam (2012) Low Noise Figure of Cascaded LNA at 5.8GHz Using T-Matching Network for WiMAX Applications. 2012 3rd Journal Conference on Innovation, Management and Technology (JCIMT 2012 3rd) , Vol. 3 (No. 6). pp. 1-4.

P

P'ng, Swee Yong (2012) Infineon Digital Library - Circulation Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Peh, Po Ing (2012) Performance Evaluation Of Optical Amplifier In WDM System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Perpustakaan, UTeM (2012) Laporan Tahunan Perpustakaan 2001-2012. UTeM, Melaka, Malaysia. (Submitted)

Phua, Ging Sheng and Tay, Choo Chuan and Ibrahim, Zulkifilie (2012) Framework of Distributed Automated System Controlling Via Mobile Device. In: InCULT 2012, 20 - 21 November 2012, Shah Alam, Malaysia.

Phua , Ging Sheng and Tay , Choo Chuan and Ibrahim, Zulkifilie (2012) Library of Distributed Computing using Object Oriented Language. In: ICIDM 2012, 3 - 4 /12/2012, Langkawi, Kedah, Malaysia.

Phuman Singh, A.S. and Hassan, Muhammad Zahir (2012) A parallel study of vibration analysis and acoustic analysis in low frequency brake noise. In: 4th International Conference on Noise, Vibration and Sound, 26-28 November 2012, Kuala Lumpur.

Pramudya Ananta, Gede and Basiron, H. and Abdullah, T.A. (2012) Methods for adaptivity in intelligent web-based learning systems. In: International Conference on Active Learning (ICAL2012), UTeM.

Pratama, S. F. and Muda, A. K. and Yun-Huoy, C. and Muda, N. A. (2012) A Comparative Study of Feature Selection Methods for Authorship Invarianceness in Writer Identification. International JournalofComputer Information Systems and Industrial Management Applications, 4. pp. 467-476. ISSN 2150-7988

Punavasvaran, A. Perumal (2012) People Development System Database In Implementing Lean Process Management. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Putra, Azma (2012) Effects of Structural Parameters on the Dynamics of a Beam Structure with a Beam-Type Vibration Absorber. Advance in Acoustics and Vibration, 2012. pp. 1-10. ISSN 1687-627X

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Farid, W.M and Ayob, Md Razali (2012) THE EFFECT OF BINDER ON THE ACOUSTICAL PERFORMANCE OF THE PADDY STRAW ‘GREEN’ SOUND ABSORBER. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Putra, Azma and Fariza, Noor and Ramlan, Roszaidi (2012) CHARACTERIZATION OF A STRUCTURE- BORNE SOURCE USING THE RECEPTION PLATE METHOD. In: 3rd International Conference of Engineering and ICT 2012, 4 - 6 April 2012, Melaka.

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2012) INSERTION OF A MICRO-PERFORATED PANEL TO IMPROVE SOUND TRANSMISSION LOSS OF A DOUBLE-LEAF PARTITION. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Putra, Azma and Sajidin, Muhammad and Salleh, Norliana and Hady, Efendy (2012) MODELLING THE EFFECT OF VIBRATION ON THE SOUND ABSORPTION PERFORMANCE OF GREEN SOUND ABSORBER USING WAVE PROPAGATION TECHNIQUE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Putra, Azma (2012) Experimental Investigation on the Effect of Container Geometry Change to Liquid Sloshing. Applied Mechanics and Materials, 165. pp. 160-164. ISSN 1660-9336

Putra, Azma (2012) On a simple technique to measure the airborne noise in a car interior using substitution source. International Journal of Vehicle Noise and Vibration, 8 (3). pp. 275-287. ISSN 1479-148X

Putra, Azma and Munir, Fudhail (2012) On a simple technique to measure the airborne noise in a car interior using substitution source. International Journal of Vehicle Noise and Vibration, 8 (3). pp. 275-287. ISSN 1479-148X

R

R., Thevendran and A. P. , Puvanasvaran (2012) Industrializing the University-SME Commercialization: A Conceptual Study of Commercialization Industry in Malaysia. PROCEEDINGS OF INTERNATIONAL CONFERENCE ON TECHNOLOGY MANAGEMENT AND TECHNOPRENEURSHIP (IC-TMT) 2012, 1 (1). pp. 100-107. ISSN IC-TMT 2012

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Tjahjowidodo, Tegoeh and Chey , Long Sheng and Chiew , Tsung Heng (2012) Theoretical Analysis of Friction Compensation Using Sliding Mode Control. Applied Mechanics and Materials, 229-231. 2385-2388. ISSN 16609336

RAFAN, NUR AIDAWATY and Jamaludin, Zamberi and Abdullah, Lokman and Chiew, Tsung Heng and Mat Ali, Mahasan (2012) Review on Friction Compensation Approach For Machine Tools Application. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

Rabiah, Ahmad and Zahari, Yunos and Shahrin, Sahib and Mariana, Yusoff (2012) Perception on Cyber Terrorism: A Focus Group Discussion Approach. Journal of Information Security, 2012. pp. 231-237. ISSN 2153-1234

Rabiah, Ahmad and Zul Azri, Muhamad Noh and Abd. Samad, Hasan Basari and Burairah, Hussin (2012) Correlated Node Behavior Model based on Semi Markov Process for MANETS. International Journal of Computer Science Issues , 9 (1). pp. 50-59. ISSN 1694-0814

Rabiah, Ahmad and Zahari, Yunos (2012) A Dynamic Cyber Terrorism Framework. International Journal of Computer Science and Information Security, 10. pp. 149-158. ISSN 19475500

Radiyah, Ab. Rahman (2012) Comparative Study On Different Of Inverter Configuration For PV System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahim, Nor Hidayah and Sutan Chairul, Imran and Ab Ghani, Sharin and Ahmad Khiar, Mohd Shahril and Abas, Norafizah and Md Thayoob, Yasmin Hanum (2012) Simulation of TDR Circuit for the analysis of Wave Propagation in XLPE cable Model. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 December 2012, Kota Kinabalu, Sabah, Malaysia.

Rahmalan, Hidayah and Abdollah, Faizal and Mohd Kosnin, Zarita and Christy Atika Sari, - and Eko Hari Rachmawanto, - (2012) Analysis of Optimization Medical Image Watermarking Using Particle Swarm Optimization Based on SLT. In: Fourth International Conference of Soft Computing and Pattern Recognition , 10-13 Dec 2012, Brunei.

Rahmat, Mohamad Faris and Idris, Fakrulradzi and Mohd Nizam, Mohd Zul Azri and Sarimin, Nuraishah and Mohamad, Mas Haslinda (2012) Performance Analysis of VoIP in Multi-Hop Wireless Network. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11- 13 December 2012, Melaka.

Raja, Izamshah and Abu Bakar, Mohd Hadzley and Mohd , amran and Sivarao, Subramonian (2012) Effects of End Mill Clearance Angle on Surface Error for Machining Low Rigidity Aerospace Structure Component. Universiti Teknikal Malaysia Melaka, pp. 308-312.

Raja Ikram, Raja Rina and Abd Ghani, M. K. and Abd. Samad, Hasan Basari (2012) Halal Computer Systems Validation Quality Assurance, Risk Assessment and Regulatory Compliance For The Pharmaceutical and Healthcare Industry. In: 3rd International Conference on Engineering & ICT (ICEI2012), April 4-6, 2012, Melaka, Malaysia.

Rajiani, Ismi and Abdul Aziz, Azah (2012) ORGANIZATIONAL COMMITMENT: LOYALTY AND NEGLECT MODEL OF EMPLOYEES RESPONSE TO ORGANIZATIONAL CULTURES. In: 5th International Colloquium on Business & Management (ICBM)/ 4th International Conference on Business & Management Education (ICBME) , 9-12 July 2012, Bangkok.

Rajiani, Ismi (2012) ISLAMIC BANK CONSUMERS IN JAVA - THE HERO, THE DUPE, THE SNOB, OR THE SOCIALLY RESPONSIBLE. In: WIEF-UiTM Occasional Paper. UiTM, Kuala Lumpur, pp. 46-55.

Ramani, Anis Niza and Baharin, Kyairul Azmi and Razali, Mohamad Nazri (2012) Resistivity Modeling and Analysis under Controlled Environment. In: Power and Energy Conversion Symposium (PECS), 17 December 2012, Melaka.

Ramlan, Roszaidi and Brennan, Michael and Mace, Brian and Stephen , Burrow (2012) On the performance of a dual-mode non-linear vibration energy harvesting device. Journal of Intelligent Material Systems, 23 (13). pp. 1423-1432. ISSN 1244-3017

Ramli, Mohd Irman (2012) Teaching Plan for BTMU1223 Engineering Design. [Teaching Resource]

Ranjit, S.S.S. and Anas, S.A. and Subramaniam, S.K. and Tan , CheeFai and S.H., Chuah (2012) Development of Solar Educational Training Kit. International Journal of Engineering and Innovative Technology (IJEIT). pp. 25-29. ISSN 2277-3754

Rasin, Zulhani (2012) Design and Simulation of Quasi-Z Source Grid-connected PV Inverter with Battery Storage. In: 2012 IEEE International Conference on Power and Energy, PECon 2012, 2-5 Dec 2012, Kota Kinabalu, Malaysia.

Rau, Vimal and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Identification of Intelligent Controls in Developing Anti-Lock Braking System. Proceedings of International Conference on Design and Concurrent Engineering 2012 October 15 – 16 Hotel Equatorial Melaka Malaysia . Universiti Teknikal Malaysia Melaka, Malaysia.

Ravin Nair, P. Nagarajan (2012) Design And Develop Three Phase Grid Connected Solar Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ravindran Nair, Ajay Nair (2012) The Investigation Of The Influence Of Filler Welding Materials On The Microstructure And Hardness Of GTA Welding In Dual Phase Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Sazalinsyah and Meng, Qinggang and Yang, Shuang-Hua (2012) Immune Inspired Cooperative Mechanism with Refined Low-level Behaviors for Multi-Robot Shepherding. International Journal of Computational Intelligence and Applications, 11 (1). pp. 1250007-1250022. ISSN 1469-0268

Razif, Mudzlan (2012) The Performance Analysis Of High Speed Steel Tool In High Speed Drilling. Project Report. UTeM, Melaka. (Submitted)

Retz, Wolgang and González-Trejo, Ernesto and Römer, Konstanze D. and Philipp-Wiegmann, Florence and Reinert, Philip and Boureghda, Samir S T and Strauss, Daniel J. and Low, Yin Fen (2012) Assessment of post-excitatory long-interval cortical inhibition in adult attention-deficit/hyperactivity disorder. European Archives of Psychiatry and Clinical Neuroscience, 262. pp. 507-517. ISSN 0940-1334

Ridzuan, Jaham (2012) Merekabentuk Dan Fabrikasi Radas Eksperimen Statik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Robani, Anidah (2012) The Attitude and Commitment of the Malaysian Government towards Islam in Malaysian Foreign Policy: An Assessment. In: Malaysia's Foreign Relations: The Agenda of National Resilience. UUM Press, Sintok, Kedah, pp. 27-52.

Roni Sahroni, Taufik and Ariff, Hambali and Abdullah, Tajul Arfiifn and Sivarao, Subramonian (2012) Design Optimization of Multi Vacuum Manifold for Semiconductor Industry. Malikussaleh Industrial Engineering Journal (MIEJ), 1 (1). pp. 5-10. ISSN ISSN 2302 934X

Roni Sahroni, Taufik and Sivarao, Subramonian and Ariff, Hambali and Abdullah, Tajul Ariffin (2012) Design of Jigs and Fixtures for Hydraulic Press Machine. Malikussaleh Industrial Engineering Journal. pp. 19-24. ISSN ISSN 2301 934X

Rosafifah, Mohamad Ali (2012) The Study Of Robot Society Using Habituation Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Rozalina (2012) Development Of Control Panel For Aristo Arm Robot. Project Report. UTeM, Melaka. (Submitted)

Rosmarni, Tajol Asnan (2012) Solar Farm Power Distribution Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusdi, Yunus (2012) Modeling And Study Of Vertebra Under Compressive Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rushilawaty, Sulaiman (2012) Design Of Reconfigurable Defected Ground Structure For Microwave Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

S, Thiruchitrambalam and Imran Syakir , Mohamad and Shafizal , Mat (2012) Metal Transfer Studies In Shielded Matel Arc Welding (SMAW). Project Report. UTeM, Melaka, Malaysia. (Submitted)

S.THIRU,, CHITRAMBALAM and LAI HUAT, CHEW and BOO ONN, PHANG and SUNDARAM, HEMAVATHI and SYAKIR MOHAMMAD, IMRAN and BIN MATH, SHAFIZAL (2012) An investigation on relationship between process control parameters and weld penetration in robotic CO2 arc welding using factorial design approach. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 4 (2). ISSN 2180-1053 (In Press)

S.THIRU,, CHITRAMBALAM and S.HEMA, VATHI and PANDEY, SUNIL (2012) A PREDICTION OF WELDING PROCESS CONTROL VARIABLES BY PREDICTION OF WELD BEAD GEOMETRY USING FACTORIAL DESIGN APPROACH. In: 3rd International Conference on Engineering and ICT (ICEI2012) Melaka, Malaysia , 4 – 5 April 2012, Melaka, Malaysia.

SAID, MD RADZAI and YAAKOB, MOHD YUHAZRI (2012) On the effect of geometrical designs and failure modes in composite axial crushing: A literature review. Composite Structure, 94 (2012). pp. 802-8012. ISSN 0263-8223

SAID, MD RADZAI and YAAKOB, MOHD YUHAZRI (2012) THE FINITE ELEMENT ANALYSIS ON HEXAGONAL RING UNDER SIMPLE LATERAL LOADING. Global Engineers & Technologists Review, 2 (2). pp. 1-7. ISSN 2231-9700

Saadun, Mohd Noor Asril (2012) NUMERICAL ANALYSIS ON THE EFFECT OF CAVITY GEOMETRY WITH HEAT TOWARDS CONTAMINANT REMOVAL. Masters thesis, Universiti Teknologi Malaysia.

Sabrina, Ahmad and Azah Kamilah, Muda and Noor Azilah, Muda and Zahriah, Othman (2012) A Framework For Empirical Investigation To Attain Cost Effective Software Requirements Though Negotiation. Project Report. UTeM. (Submitted)

Safei, Su'aidi (2012) EME's Organisational Transformation. In: Buletin EME (Education Malaysia Egypt) , January 2012, Embassy of Malaysia, Cairo.

Safei, Su'aidi (2012) MP3M: Student Leadership Transformation. In: Buletin EME (Education Malaysia Egypt), January 2012, Embassy of Malaysia, Cairo.

Safei, Su'aidi (2012) Ramadan Brings us Together (Ramadhan bi-yagma'na). [Video]

Safei, Su'aidi (2012) Wanita Agen Transformasi Sosial (Women as Agents of Social Transformation). Majalah Perwakilan, 2. pp. 1-2. ISSN 0128-3677

Safer Bee , Majid (2012) Competitive priorities of telecommunication service provider: Wireless internet. Masters thesis, UTeM.

Said, M. R and Hasan, Nor Halim and Leman, A.M. (2012) Design of Local Exhaust Ventilation for Spray Booths: Proposed Study. ARPN Journal of Science and Technology, 2 (6). pp. 541-545. ISSN 2225-7217

Said, M. R. and Ismail, M. K. and Md Akil, H (2012) DYNAMIC BEHAVIOUR OF PAPER HONEYCOMB SANDWICH PANELS. In: The 15th International Conference on Applied Mechanics and Mechanical Engineering, 29-31 May 2012, Cairo.

Said, Md Radzai and Yuhazri, Yaakob and Lau, Saijod T.W. (2012) The Finite Element Analysis On Hexagonal Ring Under Simple Lateral Loading. Global Engineers & Technologists Review, 2 (2). pp. 1-7. ISSN 2231-9700

Saidah Mastura, Abdul Ghani (2012) Centralized Browser Log Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Amin, Kamaruddin (2012) Design Control And Monitoring Technique For Domestic Usage Via Pc Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Azrin, Mohd Mokhtar (2012) E-Tape Liquid Level Sensor With GSM System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifullah , Salam and Khairul Azha , A.Aziz and Yusmarnita, Yusop and Ahmad Nizam, Mohd Jahari and Ahmad Fauzan, Kadmin (2012) Product Identification And Sorting Machine Using Robotic Arm And Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saipullah, Khairul Muzzammil (2012) Real-Time Video Processing Using Native Programming on Android Platform. In: 2012 IEEE 8th International Colloquium on Signal Processing and its Applications, 23-25 March 2012, Melaka.

Saipullah, Khairul Muzzammil (2012) ANALYSIS OF REAL-TIME OBJECT DETECTION METHODS FOR ANDROID SMARTPHONE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia . (In Press)

Saipullah, Khairul Muzzammil (2012) Enhancing Spectral Classification Using Adaboost. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) 2012, 11 - 13 Dec 2012, Melaka.

Saipullah, Khairul Muzzammil (2012) Feature Extractor for the Classification of Approved Halal Logo in Malaysia. In: IEEE International Conference on Control System, Computing and Engineering, 23-25 November 2012, Penang .

Saipullah, Khairul Muzzammil (2012) JAKIM's Halal Logo Recognition System based on Android Smartphone. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

Saipullah, Khairul Muzzammil (2012) OpenCV Based Real-Time Video Processing Using Android Smartphone. International Journal of Computer Technology and Electronics Engineering, 1 (3). pp. 1-6. ISSN ISSN 2249-6343

Saipullah, Khairul Muzzammil (2012) Target Detection of Hyperspectral Images Based on Their Fourier Spectral Features. Society of Photo-Optical Instrumentation Engineers (SPIE), 51 (11). 111704-1 . ISSN 0091-3286

Salam, Zainal and Ramli, Mohd zulkifli (2012) A simple circuit to improve the power yield of PV array during partial shading. In: Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, Sept 2012, Raleigh, NC.

Salasiah, Zakaria (2012) Chemical Safety And Risk Assessment In A Manufacturing Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Salihah, Yaakub (2012) Design And Analysis Of Gripper Mechanism For Egg Handling Robot Manipulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salim, Mohd Azli and Abd Munir, Fudhail and Abdul Halim , Nur Baiduri (2012) Development an Experimental Rig of High Rise Building to Suppress a Vertical Vibration during Earthquake Phenomena. International Review of Civil Engineering , 3 (2). pp. 111-119. ISSN 2036-9913

Salim, Mohd Azli and Abd Munir, Fudhail and Noordin, Aminurrashid (2012) Experimental Study on Vibration Level of Automotive Flexibel Wiper System. Journal of Engineering and Technology, 3. pp. 123-138. ISSN 2180-3811

Salim, Mohd Azli and Noordin, Aminurrashid (2012) A Study of the Mode Shape Effect in Automobile Braking System. International Review of Mechanical Engineering, 6 (4). pp. 719-723. ISSN 1970-8742

Salim, Mohd Azli and Noordin, Aminurrashid and ABDULLAH, Mohd Azman (2012) Modeling, Simulation and Validation of Tuned Mass Damper for High Rise Structure with Control Scheme to Suppress Dynamic Unbalance Force. Wulfenia Journal, 19 (8). pp. 298-314. ISSN 1561-882X

Salim, Mohd Azli and Noordin, Aminurrashid and Abd Munir, Fudhail and Mat Nuri, Nur Rashid (2012) The Relationship of Contact Angle and Input Shaping Scheme in Automotive Wiper System. In: 2012 IEEE RIVF International Conference on Computing & Communication Technologies, Research, Innovation, and Vision for the Future, March 2012, Ho Chi Minh City, Vietnam.

Salim, Mohd Azli and Noordin, Aminurrashid and Mansor, Muhd Ridzuan (2012) A PRELIMINARY STUDY OF LOWER SIDE BEAM STRUCTURE ON LONGITUDINAL BRIDGE MODEL. In: 3rd International Conference on Engineering and ICT (ICEI2012), 2012, Mahkota Hotel, Melaka.

Sarni Suhaila , Rahim and Norazlin , Mohammed (2012) Development Of VR Simulation : User Experience. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saveridass, Jacinta (2012) Tunable Microwave Filter Design Using Defected Ground Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sawita, Amir (2012) Effect On Mechanical And Physical Properties Of Cotton Fiber In Hybrid Laminated Composite For hard Panel Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sek, Yong-Wee and Lau, Siong-Hoe and Hasan Basri , Abd Samad and Hisham , Syariffanor and Law, Check-Yee and Che Pee, Ahmad Naim (2012) An Empirical Study Of Learning Objects As Alternative Pedagogical Tool In Engineering Education. In: 2012 International Conference on e-Education, e-Business, e-Management and e-Learning .

Shaharrudin, Syahid (2012) Device Development For Ceiling Fan With Sensor Technology To Reduce Energy Consumption At Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahbodin, F. and Abd Talib, Rosfatimah (2012) DESIGNING APA TO SCAFFOLD STUDENT IN ONLINE PBL ENVIRONMENT. Journal of Engineering and Technology, 1 (1). pp. 23-35. ISSN 2180-3811

Shamshiri, Meysam and Gan, Chin Kim and Ab Ghani, Mohd Ruddin (2012) A Review of Recent Development in Smart Grid and Micro-Grid Laboratories. In: 2012 IEEE International Power Engineering and Optimization Conference (PEOCO2012), Melaka, Malaysia: 6-7 June 2012 , 6 -7 June 2012, Melaka, Malaysia .

Shamshiri, Meysam and Gan, Chin Kim and Hasan, I. J. and Ab Ghani, Mohd Ruddin (2012) AN INVESTIGATION ON PARTICLE SWARM OPTIMIZATION ALGORITHM FOR DISTRIBUTION SYSTEM PLANNING WITH DISTRIBUTED GENERATION. In: Power and Energy Conversion Symposium (PECS 2012), 17th December 2012, Faculty of Electrical Engineering.

Shamshiri, Meysam and Gan, Chin Kim and Hassan, I. J. and Ab Ghani, Mohd Ruddin (2012) AN INVESTIGATION ON PARTICLE SWARM OPTIMIZATION ALGORITHM FOR DISTRIBUTION SYSTEM PLANNING WITH DISTRIBUTED GENERATION. In: Power and Energy Conversion Symposium (PECS 2012), 17th December 2012, Faculty of Electrical Engineering.

Sharifah Sakinah, Syed Ahmad (2012) Fuzzy Modeling through Granular Computing. PhD thesis, Univerity Of Alberta.

Sharul Izhar, Aminuddin (2012) Controlling DC Motor Variables (Voltage, Angular Velocity And Efficiency) To Compare Between Nelder-Mead Method And Powell's Method Of Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shukor, Ahmad Zaki (2012) Force Control of Musculoskeletal Manipulator Driven By Spiral Motors. Automatika - Journal for Control, Measurement, Electronics, Computing and Communications, 54 (1). pp. 74-88. ISSN 0005-1144

Shukor, Ahmad Zaki and Fujimoto, Yasutaka (2012) Planar Task Space Control of a Biarticular Manipulator Driven by Spiral Motors. International Journal of Advanced Robotic Systems. pp. 1-14. ISSN 1729-8806

Shukriwani , Sa'ad (2012) Employee retention in call centre industry. Masters thesis, UTeM.

Sidek, Safiah and Dora, Mohd Taib and Kudus, Norliah and Abu Hassan, Mahadi (2012) Academic Career in the Malaysian Higher Education: Becoming a Professor. Journal of Human Capital Development, 5 (2). pp. 127-140. ISSN 1985-7012

Sihombing, Haeryip and M.Y., Yuhazri and S.H., Yahaya and Z.A., Myia Yuzrina and A.Z., Ainul Azniza (2012) Revisited The Importance and Performance Analysis (IPA) and Kano Model for Customer Satisfaction Measurement. Global Engineers & Technologists Review, 2 (1). pp. 22-39. ISSN 2231-9700

Sihombing, Haeryip and M.K., Hafiz and M.Y. , Yuhazri (2012) Taguchis Quality Improvement Analysis of the SME Bread Manufacturing. Global Engineers & Technologist Review, 2 (9). pp. 6-18. ISSN 2231-9700

Sihombing, Haeryip and M.Y., Yuhazri and A.Razak, Jeefferie and P., Perumal and Akbar, Habibulah (2012) Real of Simply Assembly Line Balancing using Fact-Model. International Journal of Computer and Electrical Engineering, 4 (6). pp. 870-874. ISSN 1793-8163

Sihombing, Haeryip and M.Y., Yuhazri and S.H., Yahaya (2012) How to Measure and Identify the Ultimate Improvement Required for Customer Satisfaction. Global Engineers & Technologists Review, 2 (11). pp. 14-28. ISSN 2231-9700

Sihombing, Haeryip and Rassiah, Kannan and Ashaari, Zaini and M.Y., Yuhazri (2012) An Analysis and Development of Recycled Materials for Wood Plastic Composite Product. Elixir Mechanical Engineering, 51. pp. 10834-10840. ISSN 2229-712X

Sihombing, Haeryip and Yuhazri, Yaakob and YAHAYA, SAIFUDIN HAFIZ and Sivarao, Subramonian and Hazwan, M.A (2012) An Analysis of Quality Criteria to Determine the Improvement Priority Attributes. Universiti Teknikal Malaysia Melaka, pp. 489-493. ISBN 978-967-0257-16-7

Sihombing , Haeryip and M.Y., Yuhazri (2012) Revisited The Measurement Strategy of Public Sectors Performance Using Fitted Management. Journal of Human Capital Development, 5 (2). pp. 77-111. ISSN 1985-7012

Siti Adilah, Al Hassan (2012) e-Driving License Support (e-DriLiS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aminah, Samsuddin (2012) Optimization Of Vehicle Steering Wheel In Active Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Fatimah, Baba (2012) Face Recognition Development Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hajar, Mohamad and Juhaini, Jabar (2012) Measuring sustainability and competitiveness among Malaysian manufacturers: A conceptual paper. In: Business and Economics Conference: Enhancing Sustainability, Competitiveness and Innovation , 9 July - 11 July, Kota Kinabalu, Sabah, Malaysia.

Siti Hajar, Raman (2012) Fish Camkit Improvement for Fisheries Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Khalijah, Mohd Yasin (2012) Comparing Feature Selection Method For Neural Network Classification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Lailatul Qadr, Zulkipli (2012) Broadband X-Circular Polarized Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nor Salihah, Mohamad (2012) Jet Fighter (Typhoon) Laser Cutting Project. Project Report. UTeM, Melaka. (Submitted)

Siti Norbaya, Yahaya and Nusaibah, Mansor and Salleh, Yahya and Nor Hayati, Tahir (2012) Modeling Technology Transfer from University to SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Azrreen , Ruslan (2012) Sejarah Intelligent Tutoring System (Sejarah ITS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Madihah , Apandi (2012) Design And Analysis Of Casting Valve For High Voltage ABC Dead End Clamp By Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sahhiada Ashikin, Mohd Yasim (2012) Design Of X Band Mixer For Microwave Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sara, Razali (2012) Two In One Home Appliance For Low Power Consuming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Sarah , Che Halim (2012) A study of leadership qualities that effect organization performance. Masters thesis, UTeM.

Siti Soliah, Selamat (2012) Modeling And Design Of An Active Car Suspension System Using Half Car Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Suzana, Ibrahim (2012) Jony-The Unfriendly River (2 D Animation Combine With Interactive Games ). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivakumar, Dhar Malingam (2012) APPLICATION OF TOTAL PRODUCTIVE MAINTENANCE TO REDUCE NON-STICK ON PAD PROBLEM IN IC PACKAGING. International Journal of Engineering and Science, 3 (1). pp. 14-32. ISSN 2086-3799

Sivakumar, Dhar Malingam (2012) EFFECT OF PROCESS PARMAETRS DURING FORMING OF SELF REINFORCED – PP BASED FIBER METAL LAMINATE. In: Mechanics of Nano, Micro and Macro Composite Structures, 18-20 June 2012, Politecnico di Torino.

Sivakumar, Dhar Malingam (2012) FORMING ANALYSIS OF COMPOSITE AND FIBRE-METAL LAMINATE SYSTEMS. In: ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 24-28 June 2012, Venice, Italy.

Sivakumar, Dhar Malingam (2012) FORMING ANALYSIS OF SELF-REINFORCED POLYPROPYLENE BASED COMPOSITE-ALUMINIUM HYBRID STRUCTURES. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Sivakumar, Dhar Malingam (2012) Numerical investigation of the effect of temperature on the formability of a thermoplastic fibre metal laminate. Proceedings: the 7th Australasian Congress on Applied Mechanics, ACAM 7. pp. 267-275. ISSN 9781922107619

Sivakumar, Dhar Malingam and Ahmad, Rivai and Sivarao, Subramonian and Mohd. Zulkefli, Selamat and Mohd Nur Azmi, Nordin (2012) Stamp Forming Performance Of Palm Fiber Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian and Ahmad Kamely, Mohamad and Hanizam, Hashim and Mohd Fairuz, Dimin @ Mohd Amin (2012) Precision Machining Of Boiler Plate By Laser Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian and Nanthakumar, Rajoo and Widodo, W. Sapto and Haeryip , Sihombing (2012) HEXANE ECONOMIZATION IN PALM KERNEL OIL PLANT: A STUDY AFTER PROCESS DESIGN IMPROVEMENT. Global Engineers & Technologists Review, 2 (12). pp. 7-14. ISSN 2231-9700

Sivarao, Subramonian and Nur Izan Syahriah, Hussein and Raja Izamshah , Raja Abdullah and Mohd Amran, Md Ali and Mohd , Hadzley (2012) Transforming Linear Laser Cutting machine Into Laser Lathing – An Empirical Investigation & Evaluation of Roundness Quality. Journal of Current Engineering Research, 2 (2). pp. 98-104. ISSN 2250 - 2637

Sivarao, Subramonian and Sivakumar, Dhar Malingam and Taufik, - and Yuhazri, Yaakob and Tan, CheeFai and Haeryip , Sihombing (2012) An Exploratory Study - Critical Laser Processing of Composite Materials. International Journal of Engineering Research & Technology, 1 (10). pp. 1-8. ISSN 2278-0181

Sivarao Subramonian (2012) AN AUTOMATIC TYRE INFLATING SYSTEM (ATIS). PI 2012002727.

Sivarao Subramonian (2012) HYDRO-GAS AIRLESS TYRE (HAT). PI 2012701286.

Sivarao Subramonian (2012) MAGNETIC AIRLESS TYRE (MAT). PI 2012701282.

Sivarao Subramonian (2012) SUPA FAST KEY-LESS GRILL LOCKING SYSTEM. PI 2012002778.

Sivarao Subramonian (2012) A TYRE PRESSURE SUSTAINING SYSTEM (T-PreSS). PI 2012002728.

Sivarao, Subramonian and Abdul , Zuhair and Raja, izam and Mohd , amran and Nur, izan and Mohd , Hadzley (2012) TAPER QUALITY EVALUATION OF A LASER LATHED STEEL ROD USING MODIFIED FLATBED CO2 LASER CUTTING MACHINE. International Journal of Current Research and Review, 4 (15). pp. 81-91. ISSN 0975-5241

Sivarao, Subramonian and Abdul Rahim , Samsudin and Haeryip , Sihombing and Taufik, , and Yuhazri, Yaakob and Sivakumar, Dhar Malingam and Tan, CheeFai (2012) Promising Techniques of Automotive Engine Lubrication Oil Monitoring System – A Critical Review towards Enhancement. The International Journal of Engineering And Science, 1 (2). pp. 228-233. ISSN 2319 – 1813

Sivarao, Subramonian and Taufik, , and Yuhazri, Yaakob and Haeryip , Sihombing (2012) Critical Review of Electro-Mechanical Door Locking System and Proposal towards Development of Innovative Super Energy Saving Door Locking System. International Journal of Engineering and Innovative Technology, 2 (5). pp. 201-207. ISSN 2277-3754

Soh, Chooi Yoke (2012) Weight Management Go Mobile (WMGM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Song, Jean Yau (2012) Design And Analysis Stented Aneurysms For Human Body. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soo, Eng Kuan (2012) Wireless Power Transfer For Cell Phone Charging Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaimi, Misha (2012) Review of solid/liquid desiccant in the drying applications and its regeneration methods. RENEWABLE & SUSTAINABLE ENERGY, 16. pp. 4686-4707. ISSN 1364-0321

Suhaimi , Mat Din (2012) Energy Harvesting By Using Rectenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Hamzah Asyrani (2012) Development of Real-Time Virtual Environment with Hierarchical Construction. In: 6th International Conference on Ubiquitous Information Management and Communication, ICUIMC'12, 20 FEB - 22 FEB 2012, KUALA LUMPUR.

Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2012) The Study Of Wear Process On Uncoated Carbide Cutting Tool In Machining Titanium Alloy. Journal of Applied Sciences Research. pp. 4821-4827. ISSN 1819-544X

Sulaiman, Hamzah Asyrani (2012) Bounding Volume Hierarchies for Collision Detection. In: Computer Graphics. INTECH, pp. 1-17. ISBN 978-953-51-0455-1

Sulaiman, Hamzah Asyrani (2012) Quad Axis Separation Framework for Bounding-Volume Hierarchies Construction. Journal of Computing, 4 (7). pp. 74-80. ISSN 21519617

Sulaiman, Hamzah Asyrani and Othman, Mohd Azlishah and Ismail, Mohd Muzafar and Misran, Mohamad Harris (2012) Wireless Network Visualization in 3D Virtual Environment Framework. In: 2012 21st Annual Wireless and Optical Communications Conference(WOCC), 19 - 21 APRIL 2012, TAIWAN.

Sulaiman , Marizan and Tawafan, Adnan and Ibrahim, Zulkifilie (2012) High Impedance Fault Detection on Power Distribution Feeder. International Review on Modelling & Simulations, 5 (5 Part). pp. 2197-2204. ISSN 1974-9821

Sulhi, Mohammad (2012) Development Of A Power Recycling Prototype For Renewable Energy Using DC Motor Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing (2012) Extending Information Quality to Service-Oriented Architecture Initiative. Technical Report. School of Computer and Information Science, University of South Australia, Adelaide, Australia.

Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing and Abdul-Aziz, Azlianor (2012) Driving the Initiative of Service-Oriented Architecture Implementation. Journal of Software & Systems Development . pp. 1-10. ISSN 2166-0824

Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing and Abdul-Aziz, Azlianor (2012) Implementing Quality Service-Oriented Architecture Initiative in Organisations. In: Portland International Conference for Management of Engineering and Technology, 29 July - 2 August 2012, Vancouver, Canada.

Sulong, Muhammad Suhaizan and Koronios, Andy and Gao, Jing and Abdul-Aziz, Azlianor (2012) Service-Oriented Architecture Initiatives with Information Quality: Exploring the Issues. In: 20th European Conference on Information Systems (ECIS), 10-13 June 2012, Barcelona, Spain.

Suryana,, Nanna and Akbar, Habibullah and Sahib, Shahib and Pramudya, Gede and Basiron, Halizah (2012) Reflection Decomposition in Single Images Using an Optimum Thresholding-based Method. Journal of Advanced Computer Science and Technology Research, 2 (4). pp. 184-192. ISSN 2231-8275

Suryati, Abd Kadir Zailani (2012) Tracking Intruders Using Honeypot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sutan Chairul, Imran and Ab Ghani, Sharin and Ahmad Khiar, Mohd Shahril and Md Thayoob , Yasmin Hanum and Yang Ghazali, Young Zaidey (2012) Kraft Paper Insulation’s Life Assessment and Effects of Oxygen and Moisture to Paper Insulation’s Deterioration Rate. In: 2012 IEEE International Conference on Power and Energy (PECon), 2-5 December 2012, Kota Kinabalu, Sabah, Malaysia.

Sutan Chairul, Imran and Md Thayoob, Yasmin Hanum and Yang Ghazali, Young Zaidey and Ahmad Khiar, Mohd Shahril and Ab Ghani, Sharin (2012) ANALYSIS OF KRAFT PAPER INSULATION�S LIFE FOR 15MVA POWER DISTRIBUTION TRANSFORMER IN TENAGA NASIONAL BERHAD. In: 3rd International Conference on Engineering and ICT (ICEI 2012), 4-5 April 2012, Melaka, Malaysia .

Suziana , Ahmad (2012) Statistical Analysis Of Short Term Load Profile In The Utility Of Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Ahmad, Sharifah Sakinah and Pedrycz, Witold (2012) Data and feature reduction in fuzzy modeling through particle swarm optimization. Journal Applied Computational Intelligence and Soft Computing (10). pp. 1-21. ISSN 1687-9724

Syed Mohamad Shazali, Syed Abdul Hamid and Mohd Aras, Mohd Shahrieel and Anuar , Mohamed Kassim and shahrom shah, abdullah (2012) Design and Development of Industrial Systems for Guidance and Control of Marine Surface Vessels. In: 4th International Conference on Underwater System Technology : Theory and Applications 2012, 4-6 Dis 2012, Kuala Lumpur.

Syed Mohd Afiq, Syed Hassan (2012) Investigate On Mild Steel Spot Welding Strength Effect By Using Design Of Experiment(DOE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syukur, Abdul Kadir (2012) Design And Analysis A New System For Duct Testing With The Smart Installation Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

syed mohamed, muhammad syafiq (2012) The Influence of Different Hand Tool Designs on the Perception of Aesthetics, Ergonomics and Usability. International Journal of Business and Social Science , 3 (3). pp. 241-246. ISSN 2219-6021

syed mohamed, muhammad syafiq and ideris, harizah (2012) Managing Risks in a Manufacturing Environment : A Perspective from Reason’s Accident Causation Model. Universal Journal of Management and Social Sciences, 2 (8). pp. 38-46. ISSN 2226-6240

T

T., Joseph Sahaya Anand and Kok, Yau Chua (2012) XRD ANALYSIS OF Cu-Al INTERCONNECT INTERMETALLIC COMPOUND IN AN ANNEALED MICRO-CHIP. Advanced Materials Research, 620. pp. 166-172. ISSN 1022 - 6680

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli (2012) Electrosynthesized MoS2 Thin Films for Photoelectrochemical (PEC) Cells. Solid State Science and Technology Letters, 19 (1-2). pp. 64-72. ISSN 0128 - 8393

T., Joseph Sahaya Anand (2012) NICKEL AS AN ALTERNATIVE AUTOMOTIVE BODY MATERIALS. Journal of Mechanical Engineering and Sciences, 2. pp. 187-197. ISSN 2231-8380

T., Joseph Sahaya Anand and Abdul Aziz, Mohd Zaidan Bin and S., Shariza (2012) Effect of Additives on Optical Measurements of NiSe2 Thin Films. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012, November 20 - 21, 2012, SERI Malaysia Hotel, Kangar.

T., Joseph Sahaya Anand and Abdul Aziz, Mohd Zaidan Bin and K.M.Rajan, Rajes (2012) Electrosynthesized NiSe2 thin films and their characterization studies. In: International Conference of Young Researchers on Advanced Materials, July 1 - 6, 2012, MATRIX Building, National University of Singapore (NUS), Singapore. (Unpublished)

T., Joseph Sahaya Anand and Chua, Kok Yau (2012) Oxidation study on as-bonded intermetallic of Copper wire-Aluminum bond pad metallization for electronic microchip. Materials Chemistry and Physics, 136 (2-3). pp. 638-647. ISSN 0254-0584

T., Joseph Sahaya Anand and Chua, Kok Yau (2012) X-ray Diffraction Study of Intermetallic Cu-Al Interconnection in Electronic Components. In: International Conference of Young Researchers on Advanced Materials, July 1 - 6, 2012, MATRIX Building< National University of Singapore (NUS), Singapore. (Unpublished)

T., Joseph Sahaya Anand and S., Shariza (2012) A study on molybdenum sulphoselenide (MoSxSe2−x, 0 ≤ x ≤ 2) thin films: Growth from solution and its properties. Electrochimica Acta, 81. pp. 64-73. ISSN 0013-4686

T., Joseph Sahaya Anand and S., Shariza and Lim, Mei Ying (2012) Transition Metal Chalcogenide Thin Films for Photoelectrochemical / Solar Cells. In: 3rd Infineon-MMU Technical Symposium, 9 April 2012, Multimedia University, Melaka.

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2012) Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body. In: Seminar Hasil Penyelidikanm, KPT, 8 - 9 November 2012, AKEPT, Bandar Enstek,KL.

Tan, Chee Fai and Jong , Eng Ling and Keng , Wei Pin and Shaaban, Azizah and Kher, V.K. (2012) DESIGN OF A UREA GRANULATOR WITH ENERGY OPTIMIZATION. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Tan, CheeFai and Jong, E.L. and Keng, W.P. and Shaaban, A. and Kher, V.K. (2012) DESIGN OF A UREA GRANULATOR WITH ENERGY OPTIMIZATION. In: The 3rd International Conference on Engineering & ICT, 4-5 April, Melaka.

Tan, CheeFai and Ng, EngSia and Din, A.T. (2012) Mechanical Design and Analysis of All‐terrain Mobile Robot. Jurnal Teknologi, UTM, 58. pp. 21-25. ISSN 0127-9696

Tan, Kien Guan (2012) A Thermal Heated Lunch Box. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Lin Weng (2012) Smart Car Park System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Teng Teng (2012) Mechanical And Physical Properties Of Sandwich Structures Made From Chopped Strand Mat Coconut Fiber Filled With Polyurethane Foam. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wei Sye (2012) Home Appliance Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chee Fai and Eng , Ling Jong and Wei, Pin Keng and Azizah, Shaaban and V.K., Kher (2012) Design of urea granulator with energy optimization. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Tan, Chee Fai and Sarban Singh, Ranjit Singh and Alkahari, Mohd. Rizal (2012) Water Pressure Loss Analysis of Mobile Machine for Fire Fighting Purpose. International Journal of Soft Computing and Engineering (IJSCE), 2 (1). pp. 470-473. ISSN 2231-2307

Tan, CheeFai (2012) A Fault Diagnosis System for Industry Pipe Manufacturing Process. International Review of Mechanical Engineering (I.RE.M.E.). pp. 1292-1296. ISSN 1970-8734

Tan, CheeFai and Jemal, N. and Shaaban, A. and Said, M.R. and Jong, E.L. (2012) Design of Urea Granulator for Environmental Friendly Urea. International Review of Mechanical Engineering. pp. 1406-1410. ISSN 1970-8734

Tan, CheeFai and Lim, T.L. (2012) Mechanical Structure Optimization of Sewerage Inspection Robot. International Review of Mechanical Engineering, 6 (7). pp. 1476-1481. ISSN 1970-8734

Tan, CheeFai and Ranjit, S.S.S. (2012) An Expert Carbide Cutting Tools Selection System for CNC Lathe Machine. International Review of Mechanical Engineering, 6 (7). pp. 1402-1405. ISSN 1970-8734

Tan, CheeFai and Ranjit, S.S.S. and Alkahari, M.R. (2012) Water Pressure Loss Analysis of Mobile Machine for Fire Fighting Purpose. International Journal of Soft Computing and Engineering (IJSCE), 2 (1). pp. 470-473. ISSN 2231-2307

Tan, CheeFai and Alkahari, M.R. and Liew, S.M. and Said, M.R. and Ranjit, S.S.S. and Kher, V.K. (2012) Ground Vehicle for Fire Fighting Purpose in Hazardous Environment. In: Seminar Hasil Penyelidikan KPT, AKEPT.

Tan, Jit Huat (2012) Development Of Solar Tracker And Charger System. Project Report. UTeM, Melaka. (Submitted)

Tan , CheeFai and Chen, Wei and Rauterberg, G.W.M. (2012) Adaptive Neck Support for Wellbeing During Air Travel. In: Handbook of Ambient Assisted Living - Technology for Healthcare, Rehabilitation and Well-being. Ambient Intelligence and Smart Environments, 11 . IOS Press, Netherlands, pp. 1-18. ISBN 978-1-60750-836-6

Tan , Chee Fai and Ng, EngSia and Din, Abdul Talib (2012) Mechanical Design and Analysis of All‐terrain Mobile Robot. Jurnal Teknologi, UTM, 58. 21 -25. ISSN 0127-9696

Taufik, and Mohd Rizal, Salleh and Sivarao, Subramonian and Tajul Ariffin, Abdullah (2012) Desing Of An Organic Battery For Residentail Purpose Using Design For Sustainability And Rapid Prototyping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tawafan, Adnan and Sulaiman , Marizan and Ibrahim, Zulkifilie (2012) Adaptive Neural Subtractive Clustering Fuzzy Inference System for the Detection of High Impedance Fault on Distribution Power System. International Journal of Artificial Intelligence (IJ-AI), 1 (2). pp. 63-72. ISSN 2252-8938

Tay, Choo Chuan (2012) MPSW 5053/PPSW 6053: Pengurusan Sistem Kualiti. [Teaching Resource]

Tay, Choo Chuan and Sakidin, Hamzah and Husain, Kalthom (2012) Asas Pengurusan Bilik Kuliah dan Alat Bantu Mengajar. Manual. Penerbit Universiti, UTeM, Malacca.

Tee, Chin Wee (2012) Experimental and analytical investigation torsional behavior of sigma profile. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chor Wvee (2012) Auto Fuzzy PID Temperature Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh, Gim Hong (2012) Design And Development Of A Single Pole Double Throw (SPDT) Switch For Wireless Data Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh, Tze Keong (2012) Automation Process By Using PLC Omron With PC Customized Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tei , Yah Li (2012) Automatic Meter Reading. Project Report. UTeM, Melaka. (Submitted)

Tie, Chin Ho (2012) To Study, Design & Develop A Small Scale Prototype Of Micro Hydro System With Automatic Valve Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tin , Shaw Ling (2012) Design And Evaluate The Performance Of My 2nd Eye By Using Ultrasonic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toibah, Abd Rahim and Fatimah, Misran and Siti Sainillah, Sulaiman and Mohammad Ikmal, Mohamed and Mazlin, Mahamod and Azizah, Shaaban (2012) Calcium phosphate ceramics prepared from natural waste materials. In: -, -, -. (Submitted)

tamaldin, noreffendy and Abdollah, Mohd Fadzli bin (2012) Proposal for hybrid passive cooling system of batteries In the electric car. In: The 3rd International Conference on Engineering and ICT 2012 (ICEI2012), 4 - 6 April 2012, Melaka.

tamaldin, noreffendy and Dzulkifli, Mohd Amin (2012) INVESTIGATION OF ENGINE PERFORMANCE AND EMISSION LEVEL OF SI ENGINE RUNNING WITH DIFFERENT RON FUEL GRADES. 3rd International Conference on Engineering and ICT (ICEI2012) Melaka, Malaysia 4 – 6 April 2012. na-na. ISSN none

tang, s.h. and motlagh, o. and ismail, n. (2012) A Novel GA-FCM Strategy for Motion Learning and Prediction: Application in Wireless Tracking of Intelligent Subjects. arabian journal of science and engineering. xx-xx. ISSN xxxx-xxxx

U

Udayanti, Erika Devi and Choo, Yun Huoy and Muda, Azah Kamilah and Nugroho, Fajar Agung (2012) A GPGPU Approach to Accelerate Ant Swarm Optimization Rough Reducts (ASORR) Algorithm. In: The International Conference on Information Technology and Electrical Engineering (CITEE) 2012, 12 July 2012, Yogyakarta, Indonesia.

Umair, Rainul (2012) Computer Aided Oral Theraphy For Down Syndrome. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

W. Daud, W. M. Bukhari (2012) Surface Electromyography of Eyes Potential Behaviour using Wavelet Transform Analysis. World Applied Sciences Journal (WASJ. ISSN 1818-4952 (Submitted)

W. Daud, W. M. Bukhari and Sudirman, R and Omar, Camallil (2012) Electrooculograph Signals of Eye Movement Behavior with Reconstruction Wavelet Energy Distribution. 2012 International Conference on Information Science and Digital Content Technology (ICIS and IDCTA), 20417. ISSN 978-89-88678-70-1 (Submitted)

WIDODO, WAHYONO SAPTO and HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) DESIGN AND ANALYSIS OF 5 KW SAVONIUS ROTOR BLADE. Global Engineers & Technologists Review, 2 (8). pp. 1-8. ISSN 2231-9700

Wahjono, Sentot Imam (2012) STRENGTHENING FAMILY BUSINESS IN THE MUHAMMADIYAH TO IMPROVE THE POWER OF MOSLEM COMMUNITY FACING ASEAN COMMUNITY 2015. In: International Conference on Strengthening The Moslem Community in the South Asia Region toward ASEAN Community 2015, 14-16 June 2012, Malang, Indonesia.

Wai, C. Mun and Putra, Azma and Rivai, Ahmad (2012) ANALYSIS OF VIBRATION LEVEL OF A PERFORATED PANEL USING FINITE ELEMENT METHOD. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Wan Ahmad Fitri, Johari (2012) A Study On The Failure Analysis Of The Tig Welding With Dissimilar Joint. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Azahar, Wan Azriana (2012) Design And Analysis Of Dumbwaiter Lift For Public Building Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ellena Nadia, Wan Kamal (2012) Modeling, Simulation And Control Of Antilock Braking System Using Multibody Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Hazwani, Wan Hassan (2012) Fundamental Design Of Model Predictive Controller, Performance Studies And Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2012) Model Persamaan Struktural untuk Mengkaji Kesan Pengurusan Rantaian Pembekalan Hijau dalam Industri Pembuatan. Jurnal Teknologi, UTM, 59. pp. 21-27. ISSN 0127-9696

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2012) Green Supply Chain Management in Malaysian Aero Composite Industry. Jurnal Teknologi, UTM, 59. pp. 13-17. ISSN 0127-9696

Wan Mohd Azlan, Wan Mustapha (2012) Dual Band Microstrip Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Shela Ezwane, Wan Jusoh (2012) Analysis On The Effect Colour Temperature Of Incident Light To Inhomogeneous Object In Industrial Digital Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nur Afiqah, Wan Ahmad Khairuddin (2012) Wireless Security Car Using RFID System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wang, Chenqing and Abdul Rahman, Azrul Azwan and Seliger, Günther (2012) A Case Study: Feasibility and economic analysis for advanced automation in spoke rim assembly for motorcycle towards sustainability. In: Sustainable Manufacturing - Shaping Global Value Creation. Springer Berlin Heidelberg, pp. 387-392. ISBN 978-3-642-27289-9

Wong, Yan Chiew and Arslan, Tughrul and T. Erdogan, Ahmet and Haridas, Nakul and El-Rayis, Ahmed (2012) Speedy Derivative-Corrective Mass Spring Algorithm For Adaptive Impedance Matching Networks. Electronics Letters, 48 (11). pp. 653-655. ISSN 0013-5194

Wong , Yun Shi (2012) Quick Response Manufacturing (QRM) In Job Shop Environment. Project Report. UTeM, Melaka Malaysia. (Submitted)

Woon, Woei Keat (2012) The Design And Implementation OF VGA Controller On FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

wan abdul razak, intan azmira (2012) Electricity Load Forecasting Using Data Mining Technique. In: Advances in Data Mining Knowledge Discovery and Applications. InTech, pp. 235-254.

Y

YAAKOB, MOHD YUHAZRI (2012) A PRELIMINARY NOVEL STUDY ON THE GRAVITY EFFECTS OF CURING OR DRYING ANGLE ON LAMINATED COMPOSITE STRUCTURE. In: 5TH INTERNATIONAL CONFERENCE ON POSTGRADUATE EDUCATION, 18-19 DECEMBER 2012, UTM SKUDAI.

Dan, M.M.P & Yuhazri, M.Y.Y. (2012) AGRICULTURE BY PRODUCT FIBRE HYBRID COMPOSITE FOR USE IN THE CONSTRUCTION OF ARMOR ARTICLES, MEMBERS, STRUCTURES AND THE LIKE. MY-147022-A.

YAAKOB, MOHD YUHAZRI (2012) Betelnut fibres as an alternative to glass fibres to reinforce thermoset composites: A comparative study. Textile Research Journal, 82 (11). pp. 1107-1120. ISSN 0040-5175

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ and SAID, MD RADZAI (2012) SOLID FUEL FROM EMPTY FRUIT BUNCH FIBER AND WASTE PAPERS PART 7: WATER ABSORPTION TEST. Global Engineers & Technologists Review, 2 (7). pp. 7-12. ISSN 2231-9700

YAAKOB, MOHD YUHAZRI and AMIR MOHAMED, KAMARUL and HASOLOAN , HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ and RAJA ABDULLAH, RAJA IZAMSHAH (2012) An Experimental Study of Different Thermal Boxes Heated by Solar Thermal Radiation for Hot Water System at Night. In: 3rd International Conference on Mechanical and Manufacturing Engineering, 20-21 November 2012, UTHM.

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER (2012) A Comparision Analysis on Mechanical Properties between between Wax/LDPE Composite Versus Versus Coconut Coir/wax/LDPE Hybrid. International Journal of Emerging Technology and Advanced Engineering, 2 (6). pp. 69-73. ISSN 2250-2459

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ (2012) SOLID FUEL FROM EMPTY FRUIT BUNCH FIBER AND WASTE PAPERS PART 6: DIMENSION STABILITY TEST AFTER EXPOSED TO AMBIENT CONDITION. Global Engineers & Technologists Review, 2 (6). pp. 6-11. ISSN 2231-9700

YAAKOB, MOHD YUHAZRI (2012) SYNTHESIS AND FABRICATION OF AN EFFECTUAL DYE SENSITIZED SOLAR CELL. Global Engineers & Technologists Review, 2 (3). pp. 9-15. ISSN 2231-9700

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER (2012) SOLID FUEL FROM EMPTY FRUIT BUNCH FIBER AND WASTE PAPERS PART 1: HEAT RELEASED FROM CUMBUSTION TEST. Global Engineers & Technologists Review, 2 (1). pp. 7-13. ISSN 2231-9700

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ and SAID, MD RADZAI (2012) SOLID FUEL FROM EMPTY FRUIT BUNCH FIBER AND WASTE PAPERS PART 3: ASH CONTENT FROM COMBUSTION TEST. Global Engineers & Technologists Review, 2 (3). pp. 26-32. ISSN 2231-9700

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ and SAID, MD RADZAI (2012) SOLID FUEL FROM EMPTY FRUIT BUNCH FIBER AND WASTE PAPERS PART 4: COMPRESSION TEST AT LATERAL POSITION. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 2 (4). pp. 16-22. ISSN 2331-9700

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER and YAHAYA, SAIFUDIN HAFIZ and SAID, MD RADZAI (2012) SOLID FUEL FROM EMPTY FRUIT BUNCH FIBER AND WASTE PAPERS PART 2: GAS EMISSION FROM COMBUSTION TEST. Global Engineers & Technologists Review, 2 (2). pp. 7-13. ISSN 2231-9700

YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER and YAHAYA , SAIFUDIN HAFIZ and SAID, MD RADZAI (2012) SOLID FUEL FROM EMPTY FRUIT BUNCH FIBER AND WASTE PAPERS PART 5: CRACK TEST FOR TRANSPORTATION AND STORAGE PURPOSE. Global Engineers & Technologists Review, 2 (5). pp. 20-24. ISSN 2231-9700

YAHAYA, SAIFUDIN HAFIZ and HASIB, HAZMAN and AHMAD KAMELY , MOHAMAD and MD FAUADI , MUHAMMAD HAFIDZ FAZLI and YAAKOB, MOHD YUHAZRI (2012) E-RECYCLING SYSTEM MODEL AND ITS APPLICATIONS TO PLASTIC, PAPER AND DISC. Global Engineers & Technologists Review, 2 (10). pp. 1-7. ISSN 2231-9700

YAHAYA, SAIFUDIN HAFIZ and HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) INTEGRATING SPUR GEAR TEETH DESIGN AND ITS ANALYSIS WITH G2 PARAMETRIC BÉZIER-LIKE CUBIC TRANSITION AND SPIRAL CURVES. Global Engineers & Technologists Review, 2 (8). pp. 9-22. ISSN 2231-9700

YAHAYA, SAIFUDIN HAFIZ and HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI and HASIB , HAZMAN (2012) Modeling of a Jig Sampling and its Application in Disc Cutter Tools. Journal of Mechanical and Civil Engineering, 3 (2). pp. 20-23. ISSN 2278-1684

YUSOF, AHMAD ANAS and WAN ALI, WAN KHAIRUDDIN and ABD RAHMAN, THAREK and ANI, FARID NASIR (2012) MICROWAVE AND REFLECTION PROPERTIES OF PALM SHELL CARBON-POLYESTER CONDUCTIVE COMPOSITE ABSORBER. MICROWAVE AND REFLECTION PROPERTIES OF PALM SHELL CARBON-POLYESTER CONDUCTIVE COMPOSITE ABSORBER, 42 (1). pp. 59-74. ISSN 0127-9696

Yaacob, Mohd Rusdy and Yusuf Lada, Musa (2012) STUDY ON THE LOAD DISTRIBUTION BY A CHARGE CONTROLLER OF A PASSIVE SOLAR GREENHOUSE. In: International Conference on Engineering & ICT, 4 - 5 April 2012, Mahkota Hotel, Melaka.

Yaakob, Mohd Yuhazri and Sihombing, Haeryip and Perumal, Puvanasvaran (2012) STUDY OF THE OPTIMUM CONDITION TOWARDS THE INDUCING PARAFFIN WAX LDPE. International Journal of Engineering & Technology IJET-IJENS, 10 (4). pp. 9-12.

Yahaya, M. S and Noordin, Aminurrashid and Ahmad, Suziana and M. R., Sapiee (2012) Engineering Technology Program in Malaysia: A Market Survey. ScienceDirect Procedia Social and Behavioral Science, 58. pp. 448-453. ISSN 1877-0428

Yahaya, M.S and Noordin, A. and Ahmad, S. and Mohamad Sapiee, M.R. (2012) Engineering Technology Program In Malaysia: A Market Survey. In: The International Conference on Teaching & Learning in Higher Education (ICTLHE 2012) in conjunction with the 4th Regional Conference on Engineering Education and Research in Higher Education 2012 (RCEE 2012 & RHEd 2012), 10-12 April 2012, Seremban, Negeri Sembilan.

Yap, David F. W. (2012) An Adaptive Immune Algorithm based Gravimetric Fluid Dispensing Machine. Journal of King Saud University - Computer and Information Sciences, 24. pp. 49-57. ISSN 1319-1578

Yap, David F. W. (2012) A Comparative Analysis of Various Chaotic Genetic Algorithms for Multimodal Function Optimization. Trends in Applied Sciences Research, 7 (9). pp. 785-791. ISSN 1819-3579

Yap, David F. W. (2012) Comparison Between Genetic Algorithm and Electromagnetism-Like Algorithm for Solving Inverse Kinematics. World Applied Sciences Journal, 20 (7). pp. 946-954. ISSN 1818-4952

Yap, David F. W. (2012) Error Detection of Personalized English Isolated-Word Using Support Vector Machine. Trends in Applied Sciences Research, 7 (8). pp. 663-672. ISSN 1819-3579

Yap, David F. W. and Andito, D. P. and Lim, Kim Chuan and Yeo, W. K. (2012) Link Performance Enhancement For Image Transmission With FEC In Wireless Sensor Networks. Journal of Applied Sciences. pp. 1465-1473. ISSN 1812-5654

Yaw, Po Yin (2012) Heat Powered Optical Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ya’acob, Norsuzila and Yusop, Norbayah and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Mohd Salleh, Mohd Khairul (2012) Observation of Tweek Characteristics in the Mid- Latitude D-Region Ionosphere. In: 2012 IEEE Symposium on Wireless Technology and Applications (ISWTA), 23-26 September 2012, Bandung, Indonesia.

Yewguan, Soo and Masao, Sugi and Hiroshi, Yokoi and Tamio, Arai and Ryu, Kato and Jun, Ota (2012) Quantitative estimation of muscle fatigue on cyclic handgrip tasks. International Journal of Industrial Ergonomics, 42 (1). pp. 103-112.

Yong, Kok Sheng (2012) Design Of Wideband Low Noise Amplifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Kuen Wei (2012) Design And Develop The Spectacle Type Supporting Device For Visual Impaired Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusof, Muhamad Sabri (2012) Pembangunan Suis Lampu Pengesan Pergerakan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusof, N and Basari, A.S.H and Ibrahim, N.K (2012) THE UTILISATION OF CONCENTRATION PROFILE SIMULATION TO PREDICT LITHIUM-ION CELL PERFORMANCE. In: The International Conference on Informatics & Applications (ICIA2012), 3-5 JUNE 2012, UNIZA, Kuala Terengganu, Terengganu, Malaysia.

Yusof, N and Basari, A.S.H and Ibrahim, N.K. (2012) Prediction of the Lithium-ion Cell Performance via Concentration Profile Simulation. In: International Conference in Green and Ubiquitous Technology (GUT 2012), 7-8 July 2012, Bandung, Indonesia.

Yusof, R. (2012) Faedah Pengambilan Air Kosong. Buletin FTMK. pp. 32-33. ISSN 2229-9351

Yusof, R. (2012) What Hacking is all about. Buletin FTMK. pp. 24-25. ISSN 2229-9351

Yusop, Norbayah and Ya’acob, Norsuzila and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Idris, Azlina and Mohd Ali, Darmawaty (2012) Nighttime D-Region Ionosphere Characteristics from Tweek Atmospherics observed in the North America Region. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) , 11-13 December 2012, Melaka.

Yusop, Norbayah and Ya’acob, Norsuzila and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Idris, Azlina and Mohd Ali, Darmawaty (2012) Nighttime D-Region Ionosphere Characteristics from Tweek Atmospherics observed in the North America Region. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11-13 Dec 2012, Melaka.

yusof, Norzihani and Basari, A.S.H and Ibrahim, N. K. (2012) Prediction of the Lithium-ion Cell Performance via Concentration Profile Simulation. In: International Conference in Green and Ubiquitous Technology (GUT 2012), 7-8 July 2012, Bandung, Indonesia.

Z

Zahriladha, Zakaria (2012) DESIGN OF FREQUENCY SELECTIVE LIMITING CIRCUIT. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia. (In Press)

Zahriladha, Zakaria and A., Sabah (2012) Design of low loss tem coaxial cavity bandpass filter. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Zainal Abidin, Zaheera and -, M.Manaf and Shibghatullah, Abdul Samad and -, S.H.A.Mohd Yunos and -, S.Anawar and -, Z.Ayop (2012) Iris Segmentation Analysis using Integro-Differential Operator and Hough Transform in Biometric System. JTEC. pp. 1-8. ISSN 2180 - 1843

Zainal Abidin, Zaheera and Manaf, Mazani and Shibghatullah, Abdul Samad (2012) IRIS BIOMETRICS STEGANOGRAPHIC METHOD WITH PIXEL VALUE DIFFERENCING AND HOUGH TRANSFORM FOR HIGHER SECURITY SYSTEM. Proceeding of International Conference on Science, Technology & Social Sciences. pp. 1-5. ISSN -

Zainal Abidin, Nur Qamarina and Abdullah, Abdul Rahim and NORDDIN, NURBAHIRAH and Aman, Aminudin and Ibrahim, Khairul Anwar (2012) Leakage Current Analysis on Polymeric Surface Condition using Time-Frequency Distribution. In: IEEE International Power Engineering and Optimization Conference 2012 (PEOCO2012), 06/06/2012, Melaka.

Zainal Abidin, Nur Qamarina and Abdullah, Abdul Rahim and NORDDIN, NURBAHIRAH and Aman , Aminudin (2012) ONLINE LEAKAGE CURRENT MONITORING SYSTEM USING TIMEFREQUENCY DISTRIBUTION ON HIGH VOLTAGE INSULATOR. In: The Power and Energy Conversion Symposium (PECS 2012), 17/12/2012, UTEM.

Zainolizam, Musa (2012) UTeM Security Monitoring System (UTeM SEMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainuddin, Hidayat and Lewin, P.L. and Mitchinson, P.M. (2012) Characteristics of leakage current during surface discharge at the oil-pressboard interface. In: 2012 IEEE Conference on Electrical Insulation and Dielectric Phenomena, 14-17 October 2012, Montreal, Canada.

Zainudin, Mohamad Zahir and Omar, Roziah (2012) IMPLEMENTASI DASAR SOSIAL DAN IMPAK KEPADA PEMBANGUNAN KOMUNITI DI MALAYSIA. Journal of Human Capital Development, 5 (2). pp. 27-45. ISSN 1985-7012

Zakaria, Zahriladha and Sam, Weng Yik and Abd Aziz, Mohamad Zoinol Abidin and Jawad, Mohamed Saeed and Mohamad Isa, Mohd Sa'ari (2012) Investigation of Integrated Rectangular SIW Filter and Rectangular Microstrip Patch Antenna Based on Circuit Theory Approach. Journal, 1 (4). pp. 46-55. ISSN 2278-7917

Zakaria, Kamarul Ariffin (2012) Elevated Temperature Fatigue Fracture Behaviour of Aluminium Alloy Subjected to Spectrum Loadings. Applied Mechanics and Materials, 165. pp. 219-223. ISSN ISSN 1660-9336

Zakaria, Kamarul Ariffin (2012) FRACTOGRAPHY ANALYSIS OF Al6061 UNDER FATIGUE SPECTRUM LOADINGS. Engineering e-Transaction, 7 (1). pp. 28-33. ISSN ISSN 1823-6379

Zakaria, Z and Kong, F. Y. and Dasril, Y and Meor Said, M. A (2012) SYNTHESIS OF MICROWAVE FILTER WITH DISSIPATIVE ELEMENT. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia . (In Press)

Zakaria, Z and Sabah, A (2012) DESIGN OF LOW-LOSS TEM COAXIAL CAVITY BANDPASS FILTER. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia. (In Press)

Zakaria, Z and Sam , W. Y and Abd Aziz, M. Z. A. and Awang Md Isa, Azmi and Mohd Johar, Fauzi (2012) Design of Integrated Rectangular SIW Filter and Microstrip Patch Antenna. In: IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11 - 13 Dec 2012, Melaka, Malaysia.

Zakaria, Zahriladha and Ali, Nur Hasanah and Mohamad Isa, Mohd Sa'ari (2012) Design of Frequency Limiting Circuit Based on Nonlinear Matched Reflection-Mode Bandstop Resonator. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 4 (2). pp. 57-62. ISSN 2180-1843

Zakaria, Zahriladha and Sam, Weng Yik and Abd Aziz, Mohamad Zoinol Abidin and Meor Said, Maizatul Alice (2012) Rectangular Microstrip Patch Antenna Based on Resonant Circuit Approach. In: 2012 IEEE Symposium on Wireless Technology and Applications (ISWTA), , 23-26 Sept 2012, Bandung, Indonesia.

Zakaria, Zahriladha and Sam, Weng Yik and Abd Aziz, Mohamad Zoinol Abidin and Meor said, Maizatul Alice (2012) Design of Low-Loss Coaxial Cavity Bandpass Filter with Post-Manufacturing Tuning Capabilities. In: 2012 IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), , 23-26 Sept 2012, Bandung, Indonesia.

Zakaria, Zahriladha and Sam, Weng Yik and Abd Aziz, Mohamad Zoinol Abidin and Meor said, Maizatul Alice (2012) Microwave Filter and Antenna for Wireless Communication Systems. In: 2012 IEEE Symposium on Wireless Technology and Applications (ISWTA), , 23-26 Sept 2012, Bandung, Indonesia.

Zakaria, Zahriladha and Shairi , N. A and Sulaiman, R and Sam, Weng Yik (2012) Design of Reconfigurable Defected Ground Structure (DGS) for UWB Application. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), , 11-13 December 2012, Melaka, Malaysia.

Zalina , Kamis (2012) Implementation Of Object Recognition Based On Type Of Vehicle Entering Main Gate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamberi, Jamaludin and Lokman, Abdullah and Mohd Hisham, Nordin and Silah Hayati, Kamsani and Mohd Jazrin, Shamsul Bahrin (2012) Design And Development Of Stamping Kit Via Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamberi , Jamaludin and Nur Aidawaty , Rafan and Syamimi , Shamsuddin (2012) Adaptive friction compensation for a ball-screw servomotor of a single axis slider using repetitive least-square method co-researchers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zarina, Mohd. Noh and Sani Irwan, Md. Salim and Norhidayah, Mohamad Yatim and Nur Alisa, Ali and Muzalifah, Mohd. Said (2012) 'Cruise-and-Collect' algorithm for an ARM-based autonomous robot. In: The Seventeenth International Symposium on Artificial Life and Robotics 2012 (AROB 17th '12), January 19-21, 2012, Oita, Japan.

Zarina , Mohd Noh and Sani Irwan, Md Salim and Norhidayah, Mohamad Yatim and Nur Alisa , Ali and Muzalifah, Mohd Said (2012) Development of an ARM-based Application System. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Zarina , Mohd Noh and Sani Irwan, Md Salim and Norhidayah, Mohamad Yatim and Nur Alisa , Ali and Muzalifah , Mohd Said (2012) Development of arm-based application system. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Zaweer Akram, Zainal Abiden (2012) Dynamic Analysis Of A Lightweight Clutch Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulfika, Arsad (2012) Design And Develop Of Pineapple Cutting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhaimie, Boloh (2012) Design And Evaluate The Performance Of Solar Charging System For My 2nd Eye Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhaniff, Azari (2012) Heat Recovery System In Vehicle Temperature And Power Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhelmi, Saad (2012) A Study The Mathematical Modeling Of Corrosion In Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkafli, Nur Izyan (2012) Optimum Heat Exchanger Network Cleaning Schedules for Crude Distillation Unit. In: 1st international conference of chemical, environment and energy, 21-23 September 2012, Kuala Lumpur, Malaysia. (Unpublished)

Zulkifli, Ibrahim and Muhammad Sharil, Yahaya and Mohd Razali, Mohamad Sapiee (2012) Develop A Direct Drive System For Electric Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zull Azmi , Jamaludin (2012) Thermal Comfort Assesment In Manufacturing Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuriadi, Ahmad Hafizi (2012) Quadcopter Rembedded Controller For Altitude Hold And Surveillance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zurul Aida, Mohd Yusof (2012) Wireless Controlled Omnidirectional Monitoring Robot With Video Support. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Wed Oct 18 23:38:45 2017 MYT.