Browse By Repository:

 
 
 
   

Items where Year is 2016

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: | - | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Number of items: 1695.

Mitan, Nona Merry M. and Razimi, Mohd Nur Shafiq Ahmad (2016) Potential co-processing of coconut shell and sugarcane residue as a solid biofuel. In: Mechanical Engineering Research Day 2016, 31 March 2016, Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.

-

-, - (2016) Sports Massage. Kementerian Pendidikan Tinggi Dan Universiti Putra Malaysia, Kuala Lumpur, Malaysia. (Submitted)

A

A Azizi, Nurul Shafika (2016) Comparison Study On The Effect Of Double Pogo Pin And Single Pogo Pin In The IC Package Production. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A Rahman, Husnul Laili (2016) Electric Bus Adoption For Sustainable Public Transport Planning: A Cases Study At Panorama Melaka Sdn Bhd And Unit Perancang Ekonomi Negeri (UPEN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

A Rahman, Roslina (2016) Optimization Of A Race Car Top Speed During An Event In Virtual Formula. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A'zizi, Abdul Rahman (2016) Preparation And Characterization Of Paraffin-Poly (Ethylene Glycol) Composites As Form-Stable Phase Change Materials For Thermal Energy Storage Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Ghani, Hilmiah (2016) Influences Of Neodymium Magnet Configurations On The Stiffness Of A Vibration Based Energy Harvesting Device. Masters thesis, Universiti Teknikal Malaysia Melaka.

A. Hamid, Mas Eliya (2016) Pet Feeder System Using Android Apps. Project Report. UTeM, Melaka, Malaysia. (Submitted)

A. Kadir, Syahdan Amirul (2016) Friction And Wear Preventive Characteristic Of Biolubricant Derived From Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

AL-Dabbagh , Minah Mohammed Fareed Abd-A (2016) AXIAL Crushing Of Thin-Walled Tube With Hole Under Quasi-Static Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab Aziz, Nurfairuz Atiqah (2016) Microcontroller Based Communication Aid System For Disabled People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Ghani, Ahmad Fuad and Ali, Mohd Basri and Dhar malingam, Sivakumar and Mahmud, Jamaluddin (2016) Digital Image Correlation (DIC) Technique In Measuring Strain Using Opensource Platform Ncorr. Journal of Advanced Research in Applied Mechanics, 26. pp. 10-21. ISSN 2289-7895

Ab Ghani, Mohd Ruddin and Hussein, Saif Tahseen and Jano, Zanariah and Tole, Sutikno (2016) Particle Swarm Optimization Performance: Comparison Of Dynamic Economic Dispatch With Dantzig-Wolfe Decomposition. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 14 (3). pp. 1042-1051. ISSN 1693-6930

Ab Ghani, Mohd Ruddin and Liaw, Geok Pheng and Chin, Kim Gan and Sutikno, Tole (2016) Sensitivity Analysis And Comparison Between 25kw Parabolic DISH System. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 14 (3). pp. 807-814. ISSN 1693-6930

Ab Ghani, Mohd Ruddin and Nabil, Farah and Mat Lazi, Jurifa and Mohd Amin, Nur Huda and Othman, Syariffah and Jano, Zanariah (2016) Comparative Study Of Different Multilevel Topologies Of Five Level Inverter Using Spwm. International Journal of Applied Engineering Research, 11 (20). pp. 10139-10145. ISSN 0973-4562

Ab Ghani, Muhamad Hilmie (2016) Automotive Aerodynamic Energy Harvesting From Front Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Hamid, Nur Faiqah (2016) Gamification For Improving Student Engagement In Software Engineering Subject : A Case Study In UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab Rahim, Muhammad Saiful Ridzwan (2016) Significant Effect Of Galvanneal Metal Sheet To The Quality Of Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Nur Aqilah (2016) Driving And Hindering Factors In Developing Pico-Hydro Generation System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Rahman, Nur Aqilah (2016) Driving And Hindering Factors In Developing Pico-Hydro Generation System In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Muhammad Nur Asyraf (2016) Effect Of Oil Palm Trunk (OPT) And Oil Palm Frond (OPF) Fiber To Physical And Mechanical Properties Of Polyurethane (PU). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Razak, Nur Hasinah (2016) Numerical Investigation On Different Penetration Angle In Bone Drilling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab Wahab, Yuseni (2016) Enhanced Snapshot With Intelligent Optimal Replacement Model For Hostel Maintenance Management Based On Failure Data. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ab Wahid, Mohamad Safuan (2016) Water Saving Device For Ablutions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Aziz, Nur Adlina (2016) Design Of Single Phase H-Bridge Multilevel Inverter By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ab. Latif, Nurain Shyafina (2016) Sound Radiation From Vibrating Plate With Different Boundary Conditions Using Discrete Source Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abbas, Adnan Jameel (2016) Predictive Modelling Of Machining Parameters Of S45C Mild Steel. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abd Aziz, Norfarhana (2016) Effects Of MWCNTS Surface Modification On The Thermal And Mechanical Properties Of Epoxy Filled MWCNTS Nanocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Bachik, Norsyahira Famieza (2016) Green Awareness : Factors Influence Generation-Y Decision Purchase Behavior Towards Eco-Friendly Product Around Melaka Tengah, Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Karim , Ummi Ramizah (2016) A 2.45 GHz Wearable Antenna Using Conductive Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Latif, Mohd Abrar and Abd Manaf, Mohd Edeerozey and Firdaus, Muhammad ‘Izzat Syahmi and Maslamany, Loganarrth and Munawar, Rose Farahiyan (2016) Effects of Particulate Types on Biomass Particulate Filled Kenaf/Polypropylene Composite. Key Engineering Materials, 694. pp. 23-28. ISSN 1662-9795

Abd Majid, Noor Akmal (2016) Development Of High Tech Electricity System In Agriculture Field. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Manaf, Mohd Edeerozey and Nitta, Koh-Hei and Yamaguchi, Masayuki (2016) Mechanical Properties of Plasticized Cellulose Ester Films at Room and High Temperatures. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2354-2358. ISSN 1819-6608

Abd Manaf, Rumaisa (2016) Case Study Effect Of Temperature On The Nanoparticle Stability Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Abdul Fattah (2016) Development Of Linear Positioning Table For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Ahmad Shahizam (2016) Development Of Nanofiber-Coated Cabin Air Filter For Enhancing Filtration Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahim, Hatim Yaseer (2016) A Reconfigurable Logic Control Method For CIM System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Nur Azmina Izzati (2016) Development Of An Automated Medical Dispenser Reminder System Architecture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahim, Toibah and Sato, Masahiro and Yamada, Motohiro and Fukumoto, Masahiro (2016) Cold-Sprayed TiO2 Coatings From Nanostructured Ceramic Agglomerated Powders. Materials And Manufacturing Processes, 31 (11). pp. 1527-1534. ISSN 1042-6914

Abd Rahim, Yahaya (2016) Hybrid Anonymization Technique For Improving The Privacy In Network Data. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahim , Muhamad Akliff (2016) Design And Development Of Microstrip Array Antenna At 28 Ghz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Fazly (2016) Development Of Experimental Control Strategy Setup For The Labscale Winding Tension System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Abd Rahman, Muhammad Aizuddin (2016) Development Of Water Floating Nano Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rahman, Nadia Adriena (2016) Effect Of Injection Moulding Parameters On Material Characteristic Of Two Plate Mould With Different Material Using Flow Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Abdul Aliff Rahim (2016) Kajian Ultra Kapasitor Ke Atas Motor Elektrik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Rashid, Nur Umiza (2016) Nano Hybrid Of MWCNTs GNPs Filled Epoxy Nanocomposites For Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Razak, Muhammad Izzul Afandi (2016) Development Of Solar Powered Water Sensor To Monitor Water Quality For Fish Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Sukor, Siti Marsyidah (2016) The Comparison Study Of Handgrip Pressure On Steering Wheel National Cars (PROTON & PERODUA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Yazid, Nurul Shuhadah (2016) Effect Of Poly Vinyl Alcohol (PVA) On The Size Of Linseed Oil (LO) Microcapsule Self-Healing Coating. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd Zamhuri, Mohammad Huzer (2016) Rekabentuk Dan Simulasi Turbin Angin Paksi Menegak Pada Kelajuan Angin Rendah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abd. Rahim, Toibah (2016) Fabrication Of Cold Spray Ti-O Coatings Engineered From Agglomerated Powders. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abd. Rashid, Nadia (2016) Modeling And Verification Of Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Abdelrafe, Elzamly and Burairah, Hussin and Norhaziah, Md Salleh and Abdul Samad, Shibghatullah (2016) Managing And Controlling Design Process Issues By Using Stepwise Approach Modelling. Research Journal Of Applied Sciences, Engineering And Technology, 13 (2). pp. 85-97. ISSN 2040-7459

Abdelrafe M.S., Elzamly (2016) Managing Software Project Risks Using Stepwise And Fuzzy Regression Analysis Modelling Techniques. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdollah, Mohd Fadzli bin (2016) Tribology in Malaysia: General perspective. TTA E-Magazine. pp. 6-10. ISSN 228-1732

Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2016) When should i change my tire? CARe Newsletter. p. 5. ISSN 2289-9871

Abdul Afri, Mohd Nor Zamani (2016) Application Of Fiber Optic Sensor For Sodium Hypochlorite Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Helwana Adilah (2016) The Evaluation Of Mobile Educational Jawi Games For Kids 3-5 Years Old. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Aziz, Nur Hafizah (2016) Investigate The Viscosity Of Used Engine Oil Before And After Filtration And Enhance By Nanoparticles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Qayyum Edlee (2016) Propose An Optimum Periodic Supervision On Conventional Shearing Machine At Power Booster Engineering & Maintenance Sdn Bhd Using Reliability Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Gani, Ahmad Shafiq (2016) Designing Air Filtration Test Rig (Prototype) In Evaluate Efficiency Of HVAC Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Ghani, Mohamad Nur Zahir (2016) Development Of Smart Monitoring Parking System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hadi, Mohammad Hairi (2016) Isolation Performance Improvement Using Defected Ground Structure In RF Switch. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Hadi, Nur Aisyah (2016) Redesign Material Handling System By Using Ergonomic Approach To Reduce Back Pain Risk. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Abdul Qayyum (2016) Water Bill System Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Anisyahida (2016) Development A New Gear Oil Sensor Using Fiber Optic Sensor For Engine Functional Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hameed, Mohamed Aslam (2016) Optimisation Of Tyre Pressure And Fuel Type Towards Fuel Efficiency Using Design Of Experiment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Hafieza (2016) Solar Powered Fish Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Nor Nadiah (2016) Preparation And Characterization Of Natural Rubberchitson Biodegradable Urea For Slow Release Fertilizer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Hamid, Nursheda (2016) The Human Analysis And Ergonomics For The Driver Seat Design Of A Tractor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hamid, Rahimah and Ito, Teruaki (2016) 3D Prosthodontics Wire Bending Mechanism With A Linear Segmentation Algorithm. Journal of Advanced Manufacturing Technology (JAMT) . PP 33- 45. ISSN 1985-3157

Abdul Hamid., Samsiah (2016) Optimizing Traffic Light System For Emergency Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Jamal, Farah Asyikin (2016) Brand Awareness, Quality Awareness And Consumer Perception As Determinants Of Consumer Purchasing Decision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Mira Asyikin (2016) Welding Patterns Influence On The Joining Strength Of Mild Steel Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kadir, Nor Asyraf (2016) Tribological Studies Of Bio-Lubricants On Plastics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Kapor, Muhammad Farhan (2016) Blade Parameters Analysis On The Performance Of Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Khalid, Husni Azmal (2016) Design And Analysis Of Electric Bicycle For Disable Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latif, Shahida (2016) A Design And Development Of Rain-Sensing Auto Window Closure For Home. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Muhammad (2016) Renewable Energy Technology : AIRco Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Latiff, Roziah (2016) Establishing System Quality In Accredited Biomedical Calibration Laboratory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Majid, Robiahtul Adawiah (2016) The Function Of Training And Development To Implement The Green Human Resources Management (GHRM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mujid, Ahmad Bukhari (2016) Design and development of outdoor time displaying system. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Munaf, Raziyah Maznah (2016) Reactive Power Planning Using Evolutionary Programming For IEEE 26-Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Munaf, Raziyah Maznah (2016) Reactive Power Planning Using Evolutionary Programming For IEEE 26-Bus. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Munajat, Nurain (2016) Cleaner Production Implementation In Palm Oil Mill. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Mutalip, Zaiton (2016) Investigation Of Optical Wireless For Employment Within A Vehicular Environment. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Mohd Huzaif (2016) A Study On The Potential Of Peltier In Generating Electricity Using Natural Resources. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahim, Nor Azahana (2016) A Study On The Effectiveness Of Using Problem Based Learning (PBL) In Web Based Components Of Wireless Network Subject. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Suhaiza (2016) The Development Of Online Monitoring System Prototype For Tigris Conservation Center. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim, Suhaiza (2016) The Development Of Online Monitoring System Prototype For Tigris Conservation Center. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abdul Rahim , Nur Hidayu (2016) Signature Of Unwanted Signal Due To Induced Voltage AT PV Solar By Lightning Strike. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahman, Azrul Azwan and Mohamad, Nor Rizan (2016) Software-In-The-Loop Technique: An Approach To Support Reconfiguration Of Manufacturing System. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9789-9795. ISSN 1819-6608

Abdul Rahman, Mej Mohd Yazi (2016) FPGA Implementation Of AES Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rahman, Nor Nabilah Syazana (2016) Automatic Computer Vision System For Industrial Product Quality Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Muhammad Haris (2016) Development Of Flexible Clamping For Drilling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Abdul Azim (2016) Incorporating Flywheel Hybrid Module In Motorcycle : A Conceptual Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Ahmad Hafizzuhdi (2016) Design An Automated Guided Vehicle (AGV) Point To Point Motion Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rashid, Muhammad Faiz Haiqal (2016) Optimization Study On Process Condition Of Durian Shell Pulping Towards Hydrophobicity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rasib, Amir Hamzah (2016) Operational Performance Of Automotive Parts Assembly Processes Using Production Capacity Loss Equation. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdul Razak, Eza Shaheda (2016) The Study Of Measurement Error In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Aniq (2016) Development Of Remote Monitoring Room Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Asyraf (2016) Leftover Rice Starch From Food Waste To Bio-Based Plastic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Razak, Muhammad Ridhwan (2016) Influence Of Aluminium And Copper On Thermal Ageing Of Synthetic Ester Oil (MIDEL 7131). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Abdul Rob, Muhammad Faiz (2016) A Study On Machining Strategies For Thin-Walled Five-Axis Pocketing Profile : Aero-Structural Parts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Syukor, Mohamad Jaya and Mu*ath Ibrahim, Mohammad Jarrah and Mohd Asyadi Azam, Mohd Abid and Mohd Razali, Muhamad (2016) Intelligence Integration Of Particle Swarm Optimization And Physical Vapour Deposition For Tin Grain Size Coating Process Parameters. Journal Of Theoretical And Applied Information Technology, 84. pp. 355-369. ISSN 1992-8645

Abdul Syukor, Mohammad Jaya and Mu*ath Ibrahim, Mohammad Jarrah and Mohd Asyadi Azam, Mohd Abid and Mohd Razali, Muhamad (2016) Prediction Of Grain Size In The Tin Coating Using Artificial Neural Network. International Journal of Applied Engineering Research, 11. pp. 9856-9869. ISSN 0973-4562

Abdul Wahab, Fauzi and Tan, Kien Leong and Zulkifli, Hasnani and Ibrahim, Mohamad Izuan and Talib, Muhamad Akmal and Zamri, Nur Ain and Mahmoud Khatab, Omar Khatab Ibrahim (2016) Multiple Transmitters & Receivers For Free Space Optical Communication Link Performance Analysis. Journal Of Telecommunication Electronic And Computer Engineering, 8 (5). pp. 29-32. ISSN 2180 – 1843

Abdul Wahab, Muhamad Hafiz (2016) Automation Deflashing System For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdulameer, Ashwaq and Sulaiman , Marizan and Mohd Aras, Mohd Shahrieel and Saleem, Dawood (2016) Gui Based Control System Analysis Using Pid Controller For Education. Indonesian Journal Of Electrical Engineering And Computer Science, 3 (1). pp. 91-101. ISSN 2502-4752

Abdulhadi Hasan, AlJoumah (2016) Design And Development Of Planar Antenna For GSM Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdull Kadir, Nur Syahira Illya (2016) Development Of Wildlife Tracking System Prototype. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Abdullah, Amirah and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Poh, Ban Wei and Md Isa, Mohamed Hafiz and Zainal Abidin, Syazwani (2016) Thermal conductivity and viscosity of deionised water and ethylene glycol-based nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 10. pp. 2249-2261. ISSN 2289-4659

Abdullah, Asma Nor Hidayah (2016) Systematic Development Of Injection Mold : A Convocation Souvenir. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Mohammad Amirul (2016) Product Development Of Smart Soap Making Machine For Home Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Erwan Shah (2016) Temperatured-Controlled Device For Medical Application Using Peltier Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Hafiz (2016) Study Of Fluid Flow In Junction Of Car Washer Tube Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Muhammad Ilman Hakimi Chua (2016) Optimization Of Boron-Based Nanolubricant For Diesel Engine. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2016) The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792

Abdullah, Nur Suhaida (2016) Experimental Investigation On Coconut Fibre Composition Profiling With Respect To The Modulus Of Rigidity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurfarahizzah (2016) Design And Analysis Safest Encryption Television Signal Distribution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Atika Afifa (2016) Monitoring Energy Meter System By IoT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Nurul Saadah (2016) Potential Study : Development Of Rainfall's Gravitational Force Based On Power Generation For Urban Area In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdullah, Raihana Syahirah (2016) New P2P Botnets Classification And Detection Framework. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, S.F and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Mohd Saad, Wira Hidayat (2016) Fingerprint Gender Classification Using Univariate Decision Tree (J48). International Journal Of Advanced Computer Science And Applications (IJASCA), 7 (9). pp. 217-221. ISSN -

Abdullah, Siti Fairuz (2016) Classification Of Gender Using Global Level Features In Fingerprint For Malaysian Population. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Mahadhir, Majidah and Abal Abas, Zuraida (2016) Fingerprint Based Gender Classification Using Discrete Wavelet Transform And K-Nearest Neighbor. International Journal of Computer Science and Information Security (IJCSIS), 14 (8). pp. 340-344. ISSN 1947-5500

Abdullah , Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Mohd Saad, Wira Hidayat (2016) Support Vector Machine, Multilayer Perceptron Neural Network, Bayes Net And K-Nearest Neighbor In Classifying Gender Using Fingerprint Features. International Journal of Computer Science and Information Security (IJCSIS), 14 (7). pp. 336-340. ISSN 1947-5500

Abdullah Al Habshi , Syed Muhammad S (2016) Influence Of Non-Uniform Number Of Turns Per Coils And Stator Geometry On Unbalanced Magnetic Force In Brushless Permanent Magnet Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah Mohammed Saghir, Zobilah and Zahriladha, Zakaria and Noor Azwan, Shairi (2016) Selectable Multiband Isolation Of Single Pole Double Throw Switch Using Transmission Line Stub Resonator For Wimax And Lte Applications. IET Microwaves, Antennas & Propagation. pp. 1-19. ISSN 1751-8725

Abdullah Sani, Nor Azfar (2016) Design And Development Of Vehicle Security Device By Using Biometric Identification (Fingerprint). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdulraheem, Bashar Sabeeh (2016) Modelling And Analysis Of The Dynamic Behavior Of Power System During Large-Scale Contingency. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdulzahra, Ali Abdulhassan (2016) Studies Between Clarke Transformation And Symmetrical Components For Fault Analysis Of Power Distribution System Using PSCAD. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abraham, Marliana (2016) Factors Influencing Customer Acceptance Among Various Beauty Salon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu, Fairus (2016) A Study On Adoption Of Technology In SMEs Food Industry : UTAUT Model. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Kamarudin and Amat Senin, Aslan (2016) Modelling Sustainability Of SMEs Business In The New Economic Transition. International Journal Of Business, Economics And Law, 11 (2). pp. 32-37. ISSN 2289-1552

Abu Bakar, Mohamaad Syafiq (2016) Automation Deflasher Mechanism For Blow Moulded Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Mohd Nazrin Nashriq (2016) Analysis Air Pressure Inside Ducting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Noor Farah Iddayu (2016) Formation Of Iron Oxide Nanostructure By Thermal Oxidation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Norazhar (2016) Fuzzy logic approach for transformer remnant life prediction and asset management decision. IEEE Transactions on Dielectrics and Electrical Insulation, 23 (5). pp. 1070-9878. ISSN 1070-9878

Abu Bakar, Norazhar (2016) A NOVEL METHOD OF MEASURING TRANSFORMER OIL INTERFACIAL TENSION USING UV-VIS SPECTROSCOPY. IEEE Electrical Insulation Magazine, 32 (1). pp. 7-13. ISSN 0883-7554

Abu Bakar, Norazhar (2016) A New Technique To Detect Loss Of Insulation Life In Power Transformers. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Sabariah (2016) Effect Of Polycation Additive On Electrophoretic Deposition Of Surface Functionalized Boron Nitride Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Bakar, Siti Amira (2016) Occupational Safety And Health Management : Potential Risk Of Electrical Hazard At Construction Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy Pricing Optimization By Using Neural Network (NN) For Demand Site Tariff Strategy Peninsular Malaysia Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hanipah, Siti Aishah (2016) Energy Pricing Optimization By Using Neural Network (NN) For Demand Site Tariff Strategy Peninsular Malaysia Case Study. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Abu Hasan, Nurfadhilla (2016) Factors That Influencing Consumer Buying Behavior Towards Organic Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hasim, Ahmad Shukri (2016) Shunt Active Power Filter Employing Kalman Filter Estimator For Harmonics Reduction. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abu Hassan, Abu Syahid (2016) Effectiveness Of Pricing Strategies In Influence Consumer Behavior In Psychological Factor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Hassan, Mahadi and Sidek, Safiah and Mohamed, Shahrulanuar and Kudus, Norliah (2016) The Perspectives Of Four Muslim Scholars On Islamisation Of Science. Science International (Lahore), 28 (2). pp. 1359-1362. ISSN 1013-5316

Abu Samah, Khyrina Airin Fariza (2016) Modelling Autonomous Evacuation Navigation System (AENS) For Optimal Route Using Dijkstra's Algorithm. PhD thesis, Universiti Teknikal Malaysia Melaka.

Abu Seman, Zulfariz (2016) Automotive Exhaust Thermoelectric Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Talib, Siti Aznur (2016) Continuous Water Level Control Using Ultrasonic Sensor With 45 Degree Cut Pipe Insertion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abu Zarim, Nor Azimah (2016) Android Based Dyslexia Early Screening Test. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu-Khadrah, Ahmed Ismail Mohammad and Zakaria, Zahriladha and Othman, Mohd Azlishah and Mohd Zin, Mohd Shahril Izuan (2016) Markov Chain Model And Performance Enhancement For EDCA Protocol. Journal Of Communications, 11 (8). 748 - 757. ISSN 1796-2021

Abul Jalil, Mujahidah (2016) Round Nose Bullet Design Using High-Profile Curve Definition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adenan, Muhammad Muizzudin (2016) Numerical Simulation Of Incompressible Flow Of Different Types Of Fluid In A T-Junction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Adnan, Alifah (2016) The Crucial Factors Contributing Towards Excellent Customer Service In Telekom Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Affandi, Rosnani (2016) Modeling, Simulation And Feasibility Study Of The Parabolic Dish System Under Malaysia Environment. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ag Yusop, Ag Mohd Hafizul Hasrul (2016) Sensitivity Study Of Rear Suspension Properties Toward Vehicle Dynamic Characteristic Using ADAMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Aeriyn Dwierni (2016) Pigeon Hole Notification System By Using Ethernet Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Asmala and Shaun, Quegan (2016) Quality Assessment Of Restored Satellite Data Based On Signal To Noise Ratio. Applied Mathematical Sciences, 10 (49). pp. 2443-2450. ISSN 1314-7552

Ahmad, Azman and Othman, Abdul Rani and Zakaria, Zahriladha and Pongot, Kamil (2016) A Diplexed Bandpass Filter For Dual Band RF Front-End Receiver At 2.4 Ghz And 5.75 Ghz. International Journal of Engineering and Technology (IJET), 8 (3). 1571 -1578. ISSN 0975-4024

Ahmad, Azriadih (2016) FE Modelling Of Tensile Behaviour Composite Material Using Altair Hyperworks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Ibrahim (2016) Kesan Afektif Dan Emosi Pengguna Terhadap Model Kerangka Reka Bentuk Antara Muka Permainan Komputer (RAPK). PhD thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Intan Fatihah (2016) Effect Factors Of Psychophysical And Biomechanical Of Upper Quadrant Musculoskeletal Disoder Among Young Drivers. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Mohd Aireen (2016) Evaluation On Difference Working Posture Using RULA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Hafizul Hizam (2016) Dual Band And Dual Polarized Microstrip Patch Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhammad Sahril (2016) Performance Evaluation Of Fluid In A Pipe Of Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Muhd Hairill Neimi (2016) Study On Dielectric Strength Improvement Of Reclaimed Used Transformer Oil Using Fuller Earth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Muhd Hairill Neimi (2016) Study On Dielectric Strength Improvement Of Reclaimed Used Transformer Oil Using Fuller Earth. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ahmad, Nur Zakiah (2016) Enhancing The Performance Of Malaysian SME's Through Co-Branding Initiative. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad, Nurul Aini (2016) An Integrative Model Of Responsiveness And Sustainability Requirements For Automotive Industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Azamud-din, Wan Muhammad Hazwan (2016) Enhancement Quality Of Service At ADTECBP LAN Using Traffic Policing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Bashir, Omar Saifuddin (2016) Green Technology Impact On Environment In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fateh, Mohamad Nor and Marizan, Sulaiman (2016) Voltage Stability Assessment Of Power System Network Using QV And PV Modal Analysis. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 7-11. ISSN 2180-1843

Ahmad Fisal, Muhammad Faiz (2016) Design And Optimization Of Automotive Suspension Test RIG. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Mokhtar, Muhammad Shauqi (2016) Wear And Friction Profiling Of Zinc Ion Induced Corn Oil Based Bio-Lubricant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Muhammad, Aziz and Mohd Zaidi, Omar and Zainuddin, Sajuri and Mohd Shukor, Salleh (2016) Microstructural Changes Of Aluminium Alloy A319 On Cooling Slope Plate. Jurnal Teknologi, 78 (6-9). pp. 121-127. ISSN 0127-9696

Ahmad Muhammad, Aziz and Mohd Zaidi, Omar and Zainuddin, Sajuri and Mohd Shukor, Salleh (2016) Microstructural Morphology Of Rheocast A319 Aluminium Alloy. Advances In Mechanical Engineering, 8 (5). pp. 1-10. ISSN 1687-8132

Ahmad Murad, Farah Aini (2016) 6.0 Ghz Antenna For Wireless Communications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nasri, Mior Hezeri Akmal (2016) Development Of A Wall Climbing Robot For Cleaning Crude Oil Storage Tank. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nazri, Ahmad Danial (2016) Home Appliances Monitoring And Control Using Smartphone Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Afiq Syazwi (2016) Optimization Of Process Condition On Loading Degree Of Magnetic Composite Sheet By Lumen Loading Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Razli, Mohd Faez (2016) Gas Leakage Monitoring Over The Net With Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira (2016) Consensus Control Of A Class Of Nonlinear Systems. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Sarbaini , Syahirah (2016) Implementation Of Various Bio-Material As Double Negative Metamaterial Build In For Ultra-Wideband (UWB) Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sibi, Mohd Yazid (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Prototyping And Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajuddin, Arifah Nabilah (2016) Design Of Microwave Resonator Sensor For Material Characterization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusuf, Ismail and M. J., Chen and M. F., Azizi and M. A., Sis (2016) Experimental Investigation On The Use Of Natural Waste Fibres As Acoustic Material Of Noise Silencer. Journal Of Advanced Research In Materials Science, 22 (1). pp. 1-10. ISSN 2289-7992

Ahmad Yusuf, Ismail and Norshadatulakmar, Mat Shadid and Aliah Mastura, Mohd Nizam (2016) Development Of Green Curtain Noise Barrier Using Natural Waste Fibres. Journal Of Advanced Research In Materials Science, 17 (1). pp. 1-9. ISSN 2289-7992

Ahmad Zaki, Shukor and Jun Wei, Lee and Muhammad Herman , Jamaluddin (2016) Investigation On Force Scaling For Multi Degree Of Freedom Bilateral Teleoperation Control System. International Journal of Mechanical and Mechatronics Engineering, 16 (6). pp. 1-11. ISSN 2077-124X

Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin and Muhammad Fahmi, Miskon and Fariz, Ali @ Ibrahim and Muhammad Qamarul Arifin, Redzuan (2016) An Analysis Of Sensor Placement For Vehicle's Blind Spot Detection And Warning System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 101-106. ISSN 2180-1843

Ahmat, Norun Najjah and Sarodin, Mohd Safari (2016) Tahap Kesedaran Penjawat Awam Islam Terhadap Kepentingan Takaful Hayat (The Level Of Understanding Among The Muslim Government Sector Employee On The Importance Of Takaful). Journal Of Human Capital Development (JHCD), 9 (2). pp. 1-10. ISSN 1985-7012

Ahmed, Dawood Saleem (2016) Impact Of Distributed Generation On Power System Protection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aiman Zakwan, Jidin and Norfadzlia, Mohd Yusof and Tole, Sutikno (2016) Arduino Based Paperless Queue Management System. TELKOMNIKA (Telecommunication Computing Electronics And Control), 14 (3). pp. 839-845. ISSN 1693-6930

Aiman Zakwan , Jidin (2016) Arduino Based Paperless Queue Management System. Telkomnika Telecommunication,Computing,Electronics and Control, 14 (3). pp. 839-845. ISSN 1693-6930

Aiman Zakwan , Jidin (2016) Wireless Voice-Based Wheelchair Controller System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 117-122. ISSN 2180-1843

Ajmi, Ahmed Ali (2016) Study And Analysis The Impact Of Temperature In Turbine Room On The Performance Of Employees In. Masters thesis, Universiti Teknikal Malaysia Melaka.

Akbar, Habibullah (2016) 3D Intrinsic Scene Characteristics Extraction Framework For A Single Image. PhD thesis, Universiti Teknikal Malaysia Melaka.

Akin, Aisyah Gwynnie Chembat (2016) Energy Analysis For Lighting System In Academic Building - Case Study In IKM Bintulu. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al Amin , Mohamed Sultan (2016) Circular Economy Ownership Models:A View From South Africa Industry. Procedia Manufacturing, 8. pp. 284-291. ISSN 2351-9789

Al-Ahnomi, Rammah Ali Hussien (2016) A Novel Microwave Sensor With High-Q Resonator For High Sensitivity Material Characterization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Bahar, A. A. M. (2016) Symmetrical Split Ring Resonator Metamaterials For Microwave Biosensor. ARPN Journal Of Engineering And Applied Sciences, 11 (6). 3938 - 3942. ISSN 1819-6608

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan and Shairi, Noor Azwan (2016) A Novel Microwave Sensor With High-Q Symmetrical Split Ring Resonator For Material Properties Measurement. Jurnal Teknologi , 78 (10-3). 37 - 42. ISSN 2180-3722

Al-Ani, Mustafa Khudhur Hussein (2016) Greening The Existing Building (Chancellery Building - Universiti Teknikal Malaysia Melaka). Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Edreesi, Istabraq Sabah Naser (2016) Identification Of The Electronic Information Sharing Influence Factors That Affect The Participation Behavior Of The Employee. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Hegazi, Ammar Abdullah Hussein and Zakaria, Zahriladha and Shairi, Noor Azwan and Salleh, Azahari (2016) Review Of Recent Developments In Filtering-Antennas. International Journal on Communications Antenna and Propagation (IRECAP), 6 (3). 125 - 131. ISSN 2039 – 5086

Al-Khafaji, Omar Abdul Hassan Lafta (2016) Lateral Crushing Of Circular Ring Tube Under Quasi-Static Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Khawlani, Hafedh Abdullah Mofreh Dhafer (2016) Design Of Antenna With Notch Filter To Support Multifunction Operation Standards In Wireless Communication Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Al-Nasrawi, Hayder Saad Oleiwi (2016) Tribological Studies Of Bio-Lubricant Under High Loading Capacity. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Shami, Samer Ali (2016) The Role Of Microcredit Financing On Women Empowerment In Malaysia. PhD thesis, Universiti Teknikal Malaysia Melaka.

Al-Shami, Sayed Samer Ali and Muhamad, Mohd Razali and Abdul Majid, Izaidin and Yunus, Ahmad Rozelan and RASHID, NURULIZWA (2016) The Effect of Microfinance on women's empowerment: Evidence from Malaysia. Asian Journal of Women's Studies, 22 (3). pp. 318-337. ISSN 1225-9276

AlGumaei, Mohammed Yahya Qaid (2016) Design And Development Of Dual-Band RF Switch At 2.3 Ghz And 3.5 Ghz For Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Ali, Muhammad Faez (2016) Fuzzy Logic Controller To Maintain Parabolic Dish (PD) Receiver Temperature Within Safe Operating Range. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ali, Muhammad Syahir (2016) Pre Chamber For Performance Improvement Using Compressed Natural Gas In Single Cylinder Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali, Nazarudin (2016) Flexible Metasurface-Enabled Antenna For Wearable Medical Body-Area Network Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali, Nurul Fatihah (2016) Emergency Voice Detect Tracking System Using Mobile Phone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ali A., Abdulzahra and Tamjis, Mohamad Rom and Ab Ghani, Mohd Ruddin and Liaw , Geok Pheng and T.H., Saif and Jawad, Ghassan and Dawood S., Ahmeed and Zulkefle, Ahmad Aizan (2016) Comparison Study Of Energy Efficiency Activities Programs Among The Selected Region And Countries: Lessons Learned For Malaysia. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3980-3984. ISSN 1819-6608

Alias , Khamis and Mohd Ruddin, Ab Ghani and Gan, Chin Kim and Muhammad Nizam , Kamarudin (2016) Voltage And Frequency Control Of Microgrid System With Demand Response. International Journal of Simulation Systems Science & Technology, 17 (41). pp. 1-6. ISSN 1473-8031

Allan , Soon Chan and Hee, Kee Min and Kuah, Guan Keong (2016) Smart Air Conditioning System. Smart Air Conditioning System. pp. 1-6. ISSN XXXX-XXXX (Unpublished)

Amaluddin, Zainuddin and Syafeeza, Ahmad Radzi and Mazree, Ibrahim and Norihan, Abdul Hamid (2016) A development Of electrical Vehicle Charging System Using Wireless Power Transfer. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6328-6333. ISSN 1819-6608

Ambo, Nur Farhani (2016) Enhancing The Breakdown Voltage Of Natural Ester Insulating Oil By Optimizing Mixed Antioxidants For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ambo, Nur Farhani (2016) Enhancing The Breakdown Voltage Of Natural Ester Insulating Oil By Optimizing Mixed Antioxidants For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Amer, Mohammad Saifullah (2016) Development Of Electronic Notice Board Using Wireless Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amer Hamzah, Nur Sakinah (2016) Determinant Factors That Affect To Brand Loyalty Of Malaysia Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ameran, Noorleysa Farahani (2016) 1.5V To 24V Adjustable DC Power Supply Design Based On Bang-Bang Control Of Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aminur Hazieq, Zulkefli (2016) Study Of Adsorbent Effectiveness On Reclaimed Transformer Oil. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Aminurashid, Meor Azizul Fitri (2016) The Theoretical Of Dimensional Measurement By Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Alifh Omar (2016) Two Stroke Swivel Motion Engine Simulation Using Lotus Engine Software. Masters thesis, Universiti Teknikal Malaysia Melaka.

Amir, Mohd Zubir (2016) Development Of Steer-By-Wire (SBW) Controller System For Steering Respone. Masters thesis, Universiti Teknikal Malaysia Melaka.

Amran, Nurul Aini (2016) Design And Development Of Switchable Matched Bandstop To Bandpass Filter Using Ring Resonator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amyrul Azuan, Mohd Bahar and Zahriladha, Zakaria and Eliyana, Ruslan and Azmi, Awang Md Isa and Rammah Ali, Hussien Al-Ahnomi (2016) Microwave Fluidic Sensor Using Enhanced Coupling Peripheral Microstrip Split-Ring Resonator Sensor. 2015 IEEE International Conference on Control System, Computing and Engineering (ICCSCE). pp. 72-76. ISSN 978-147998252-3

Amzah, Mohd Nuralim (2016) Development Of Portable Air Compressor By Using A Battery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

An Efendi, Hizrian (2016) Battery Flat Preventer Device Design For Car Based On Bang-Bang Controller Of Current Limiter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Ruo Li (2016) Potential Study On Wind Turbine Generation By Vehicles Vortex On Highways. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Teoh Ong (2016) Computer Vision Inspection And Classification On Printed Circuit Boards For Flux Defects. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ang, Wei Pin (2016) Energy Adaptive Power Management System Using MPPT Techniques For Energy Scavenging In Mobile And Wireless Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ani, Mohammad Firdaus (2016) Developing Regression Models Of Driver Fatigue Using An Ergonomics Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Anis Suhaila, Mohd Zain and Nor Fatihah, Mohd Zain and Fauziyah, Salehuddin and N., Jamaluddin and N., Abdullah Yaacob (2016) Design And Characterization Of 20nm SOI MOSFET Doping Abruptness Dependent. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6344-6348. ISSN 1819-6608

Anisah, Abd Latiff and Noraiham, Mohamad and Jeefferie, Abd Razak and Mohd Hayatunnufus, Md Nasir and Siti Rahmah, Shamsuri and Mazlin Aida, Mahamood and Muhamad Ilman Hakimi Chua, Abdullah and Hairul Effendy, Ab Maulod (2016) Correlation Of Wear Characteristics With Hardness Of Recycled Carbon Fiber Prepreg Reinforced Polypropylene Composites. Journal Of Materials Research, 31 (13). pp. 1908-1913. ISSN 0884-2914

Annathurai, Vinodh and Gan, Chin Kim and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) Shading Analysis For The Siting Of Solar PV Power Plant. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5021-5027. ISSN 1819-6608

Annathurai, Vinodh and Gan, Chin Kim and Ibrahim, Khairul Anwar and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) A Review On The Impact Of Distributed Energy Resources Uncertainty On Distribution Networks. International Review of Electrical Engineering (IREE), 11 (4). pp. 420-427. ISSN 1827- 6660

Annuar Hashim, Muhammad Arif (2016) Development Of Building Application Noise Barrier Using Sandwich Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anthony Bruster, Jiim and Eliyana, Ruslan and Zahriladha, Zakaria and Norlezah, Hashim and Mohamad Ariffin, Mutalib and Nasrullah, Saifullah (2016) Tunable Notch Response For Ultra Wide-Band Bandpass Filter. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 492-497. ISSN 978-147998252-3

Anuar, Amanina Zahidah (2016) Development Of Home Appliances Controller Via Phone System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Muhammad Azim (2016) Development Of A New Conceptual Manual Wheelchair Using Integrated Approach For Elderly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anuar, Siti Zahrah (2016) Modelling And Analysis Of Sensorless Permanent Magnet Synchronous Motor By Using Fundamental Excitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar, Siti Zahrah (2016) Modelling And Analysis Of Sensorless Permanent Magnet Synchronous Motor By Using Fundamental Excitation. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Anuar , Ammar (2016) Adaptive Traffic Prioritization Algorithm Over Ad Hoc Network Using IEEE 802.11e. Masters thesis, Universiti Teknikal Malaysia Melaka.

Anuar , Mohamed Kassim and Takashi , Yasuno and Hiroshi, Suzuki and Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Jafar, Fairul Azni and Subramonian, Sivarao (2016) Conceptual Design And Implementation Of Electronic Spectacle Based Obstacle Detection For Visually Impaired Persons. JOURNAL OF ADVANCED MECHANICAL DESIGN, SYSTEMS, AND MANUFACTURING, 10 (7). pp. 1-12. ISSN 1881-3054

Anuar Falellah , Mohd Nurul (2016) Design Multiband E-Shaped Fractal Microstrip Patch Antenna With Defect Ground Structure (DGS) By Using Graphene. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwar, Ruksana (2016) Concept, Design And Implementation Of Solar Powered Smart Waste Bin Management System With Odor Sense. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anwaruddin, Amirah Nadiah (2016) Portable LED Dot Matrix Display Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arbain, Nur Atikah (2016) Improving Triangle Geometry Shape Features Through Triangle Points Selection In Digit Recognition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arham, Nurul Famyza (2016) Integrated Microwave Bandpass And Bandstop Filter To Multifunction Operation In Wireless Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin, Ab Razak (2016) HVAC Monitoring (Temperature) And Controlling (Valve/Damper) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ariffin @ Mohd Saufi, Mohamad Assif (2016) Optimization Performance Of Fiber Optic Sensor On Fully Synthetic Test Oil For Engine Traditionally Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arshad , Norsuhaidah (2016) Fault Analysis And Test For Bridge Defect In Resistive Random Access Memory. Masters thesis, Universiti Teknikal Malaysia Melaka.

As'ari, Nurul Farhana (2016) Key Determinants Of Consumer Characteristics In Decision Making. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ashwaq, Abdul Ameer and Marizan , Sulaiman and Mohd Shahrieel, Mohd Aras and Dawood Saleem, Ahmeed (2016) Tuning Methods Of Pid Controller For Dc Motor Speed Control. Indonesian Journal Of Electrical Engineering And Computer Science, 3 (2). pp. 343-349. ISSN 2502-4752

Asmala, A. and Shaun, Quegan (2016) The Effects of Haze on the Accuracy of Maximum Likelihood Classification. Applied Mathematical Sciences, 10 (39). pp. 1935-1944. ISSN 1312-885X

Asmala, A. and Shaun, Quegan (2016) Haze Removal Concept in Remote Sensing. Applied Mathematical Sciences, 10 (18). pp. 845-859. ISSN 1312-885X

Asraf Ali, Muhammad Saiful (2016) Development Of Classroom Noise Detector Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asung, Zillah (2016) Factor Affecting The Intention Of University Students Towards Creating Innovative Solution For Social Entrepreneurship. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Athirah, Mohd Ghazali (2016) Develop a regression model for relationship between psychophysical and biomechanics factors of push activities. Masters thesis, Universiti Teknikal Malaysia Melaka.

Atiyah, Mohsin Hameed (2016) The Influence Of Friction Stir Welding Parameters On Mechanical Properties Of 6061-T6 Aluminum Alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Atyaf Khalid, Hameed and Nugroho, Dewayanto and Du, Dongyun and Mohd Ridzuan, Nordin and Mohd Hasbi, Ab. Rahim (2016) Kinetic And Thermodynamics Of Methylene Blue Adsorption Onto Zero Valent Iron Supported On Mesoporous Silica. Bulletin Of Chemical Reaction Engineering And Catalysis, 11 (2). pp. 250-261. ISSN 1978-2993

Awang, Syuhada (2016) Development Of Object Tracking Architecture Based On Colour Recognition Method For Autonomous Motion Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Awang @ Rozalli, Ahmad Sofwan (2016) Design Of Ultimate Shield For Fire Fighting Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayob, Muhammad Amirul Shafiq (2016) Experimental Investigation Of Front Sprocket Failure Of Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ayub, Asyraf (2016) Study On The Use Of Statistical Approach To Assess Environmental Noise Pollution From Batu Berendam Industrial Estate Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahar, Muhd Afif Fikri (2016) Improvement Of Radial Distribution Network With Distributed Generation (DG) By Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahar, Muhd Afif Fikri (2016) Improvement Of Radial Distribution Network With Distributed Generation (DG) By Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Azahar, Siti Arfah (2016) Commercialization Success Factor And Business Performance : A Case Of Dewisha Beauty Secret. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azam, Muhammad Firdaus (2016) Fingerprint Attendance With GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan, Amar Shafiq (2016) Development Of An Automated Helmet Dryer Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana, Md Yusop and Ramizi, Mohamed and Azah, Mohamed (2016) Inverse Dynamic Analysis Type Of MPPT Control Strategy In A Thermoelectric-Solar Hybrid Energy Harvesting System. Renewable Energy, 86. pp. 682-692. ISSN 0960-1481

Azemin, Masyhadi (2016) Design And Analysis Of Optimum Clearance Of An Open Small Thimble Blanking Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azian Kamaruddin, Rabiatul Adawiyah (2016) Design And Development Of Radial Line Slot Array Antenna At 28.00 GHZ. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azidin, Farid Arafat (2016) Energy Management System For Three-Wheel Light Electric Vehicle Using Multi-Sources Energy Models. PhD thesis, Universiti Teknikal Malaysia Melaka.

Azimidon, Nurul Balqish (2016) Android Monitoring System For Home Security Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azis, Ahmad Faizal (2016) Incorporating Flywheel Hybrid Module In Automobile : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039

Aziz, Ahmad Zuhairi (2016) Contribution Of Lightweight Materials To The Design And Manufacturing Of An Electric Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Azrull (2016) Monitoring And Determination Of The Appropriate Equivalent Cylinder Radius For Axially Compressed Steel Cone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Iza Nuriza (2016) FPGA-Based Arduino Architecture Implementation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Muhammad Haziq (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Simulation And Analysis Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Mohamad Syahmi (2016) Food And Beverage Company Performance Based On Their Productivity MAMEE-Double Decker (M) Sdn Bhd vs Nestle (M) Berhad. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Mu'az (2016) Development Of Hydroelectric Generator By Using Piping System In Emergency Situation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azizan, Noor'ain (2016) Strength Analysis Of IC Package Through The Impact Of Dynamic Load. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azma , Putra (2016) Oil Palm Empty Fruit Bunch Fibres As Sustainable Acoustic Absorber. Applied Acoustics, 119. pp. 9-16. ISSN -

Azman, Ahmad and Abdul Rani, Othman and Zahriladha, Zakaria and Kamil, Pongot (2016) A Diplexer Bandpass Filter For Dual Band RF Front-End Receiver At 2.4 GHz And 5.75 GHz. International Journal Of Engineering And Technology (IJET), 8 (3). pp. 1571-1578. ISSN 2319-8613

Azman, Ahmad and Abdul Rani, Othman and Zahriladha, Zakaria and Kamil, Pongot (2016) A Two Stage Of Concurrent Dual-Band Low Noise Amplifier Using Current-Reused With Hi-Pass And Lo-Pass Matching Technique. Journal Of Theoretical And Applied Information Technology, 89 (2). pp. 389-396. ISSN 1992-8645

Azman, Amilya (2016) Factors That Affect The Foreign Direct Investment (FDI) In Johor Through The Perspective Of Marketing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Hazwani (2016) X-Band Spanar Antenna For Heart Rate Monitoring System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azman, Mohamad Al-Bukhari (2016) Mobile Phone Charger Design Using Telephone Line Based On Bang-Bang Control Of Buck Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhamad Azim (2016) The Perception, Benefit And Challenge Of Strategic Alliance Towards Development Of National Composite Centre (NCC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhamad Azri (2016) Design Of Backup System For Solar-Powered Air Conditioning By Using Condensed And Evaporated Accumulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Muhammad Faiz (2016) Factors Influencing Online Shopping And Its Effect On Customer Satisfaction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nur Azziana Afifie (2016) Concept, Design And Implementation Of Solar Powered Smart Waste Bin Management System With Level Sense. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Nurul Azliyana (2016) Development Of Public Transportation (Bus) Notification Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azman, Rashid Sidek (2016) Development Of Arduino Based Secret Door Knocking Pattern Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Awang Md Isa and Mustafa H., Othman and Zahariah, Manap and Mohd Sa'ari, Mohamad Isa and Mohd Shahril Izuan, Mohd Zin and Mohd Shakir, Md Saat and Zahriladha, Zakaria (2016) Improved Location And Positioning Utilizing Single MIMO Base Station In IMT-Advanced System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 75-82. ISSN 2180-1843

Azmi, Azrull Fazren (2016) Grounding Monitoring System For Retaining The Property Of Grounding Protection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi, Nurul Amielia Hidayah (2016) Development Of Anti-Theft Surveillance System With Cloud Based Pictures Storage By Using Image Processing Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmi Ali, Muhammad Hanis (2016) Comparative Study On The Different Range Of NIR Sensor Measurement For Glucose Concentration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmin, Ahmad Faris (2016) Human Robot Interaction (HRI) Using Simple, Interactive Robots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrinshah , Abu Bakar (2016) Environmental assessment of the indoor air contaminants on the air conditioning system at the Universiti Teknikal Malaysia Melaka (UTeM) main library. Project Report. UTeM. (Submitted)

Azziddin, Mohamad Razali and Norazelina, Kamisman and Jurifa, Mat Lazi and Norhazilina, Bahari (2016) Differential Evolution Technique Of HEPWM For Three-Phase Voltage Source Inverter. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8958-8964. ISSN 1819-6608

Azziddin, Mohamad Razali and Norazelina, Kamisman and Jurifa, Mat Lazi and Norhazilina, Bahari (2016) HEPWM Using Differential Evolution Technique For Three Phase Voltage Source Inverter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 325-330. ISSN 978-147998598-2

B

Baba, Zuleeda 'Addilla (2016) The Factors Acceptance Family Takaful Insurance Among Citizen In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badeli, Siti Yuhainiazwa (2016) Applying Process Failure Mode And Effect Analysis (PFMEA) Approach By Using DMAIC To Improve Product Quality Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Badr Aldeen, Badr Abdallah (2016) Business Intelligence Tool Analysis And Exploration Of Attendance Management System (AMS) Using Auto Regression TREE (ART). Masters thesis, Universiti Teknikal Malaysia Melaka.

Badrul Hisham, Ahmad and Nornikman, Hassan (2016) Dual Band Printed Folded Dipole Antenna For Wireless Communication At 2.4 GHz And 3.5 GHz Applications. 2015 Asia-Pacific Microwave Conference (APMC), 3. pp. 1-3. ISSN 978-1-4799-8765-8

Badrulhisham, Mohammad Zulkhairi (2016) Adjustable Power Monitoring System (APMS) For Daily Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahari, Mohamad Aizat (2016) Analysis Of Fin And Hole Effect Towards Air Velocity And Energy Absorption During Impact Test For Bicycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharu, Mahsuri (2016) Innovation Successful Factor In Traditional Food Product By SME. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Baharudin, Muhammad Dhiauddin (2016) Quasi-Static And Dynamic Compression Behaviours Of Biocomposites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification And Parameter Estimation Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahran, Ali Izzuddin (2016) Identification And Parameter Estimation Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Bahri, Mohd Abu Zar (2016) Development Of Magnetorheological Damper Test Rig Machine For Automotive Suspension. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bakeri, Hayati (2016) Consumer Buying Perception Towards The Effectiveness Of Avon Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Balai, Lorita Lawi (2016) A Study To Propose Solution On Palm Oil Mill Screw Press Machine Breakdown Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Basari, Amat Amir and Seiji, Hashimoto and Bunji, Homma and Hiroaki, Okada and Hideki, Okuno and Shunji , Kumagai (2016) Design and optimization of a wideband impact mode piezoelectric power generator. Ceramics International, 42. pp. 6962-6968. ISSN 0272-8842

Basiran , Mohamad Azman (2016) Dynamic Assembler For Reconfigurable Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Basiron, Halizah and Abdo Alrawhani, Ebrahim Mohammed and Sa'aya, Zurina (2016) Real Estate Recommender System Using Case-Based Reasoning Approach. Journal Of Telecommunication,Electronic And Computer Engineering (JTEC), 8. pp. 177-182. ISSN 2180 – 1843

Basiron, Halizah and Jaya Kumar, Yogan and Ong, Sing Goh and Ngo, Hea Choon and C Suppiah , Puspalata (2016) A Review On Automatic Text Summarization Approaches. Journal Of Computer Science, 12. pp. 178-190. ISSN 1552-6607

Basiron, Halizah and Shamsudin, Nurul Fathiyah and Sa'aya, Zurina (2016) Lexical Based Sentiment Analysis–Verb,Adverb & Negation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8. pp. 161-166. ISSN 2180-1843

Basri, Siti Khairunnisa (2016) Adoption Of Electronic Scheduling To Reduce Waiting Time In The Hospitals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bidzani, Norshamimi Diana (2016) The Planning Of Handover In 4G Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bin, Tang and Brennan, MJ and V, Lopes Jr and S da, Silva and Ramlan, Roszaidi (2016) Using Nonlinear Jumps To Estimate Cubic Stiffness Nonlinearity: An Experimental Study. Proceedings Of The Institution Of Mechanical Engineers, Part C: Journal Of Mechanical Engineering Science, 230 (19). pp. 3575-3581. ISSN 0022-2542

Birang, Katerina (2016) Formation Of Cobalt Doped Zinc Oxide Photocatalyst For Synthetic Methyl Orange Degradation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Boey, Jia Qi (2016) The Implementation Of Cost Leadership Strategy Towards The Purchase Decision Of First Time Car Buyer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bong, Yu Jing (2016) Design And Characterization On Piezoelectric Cantilever As A Self-Powered Accelerometer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Borhannodin, Nurul Nadiah (2016) Blood Glucose Detection Using GSR Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bubin, Rabiah Aduwiyah (2016) Factors To Enhance Productivity By Utilising Waste Management In Malacca Manufacturing SMEs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Burairah, Hussin and Abdelrafe, Elzamly (2016) Quantitative And Intelligent Risk Models In Risk Management For Constructing Software Development Projects: A Review. International Journal Of Software Engineering And Its Applications, 10 (2). pp. 9-20. ISSN 1738-9984

Buyong, Zulhafiz (2016) Conveyor Speed Control Application Based On PID Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

C

Chai, Ze Qin (2016) Wireless Home Switch Using Arduino UNO. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chairul, Saleh and Nur Rachman, Dzakiyullah and Jonathan Bayu, Nugroho (2016) Carbon Dioxide Emission Prediction Using Support Vector Machine. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-8. ISSN 1757-8981

Cham, Kah Yi (2016) Design And Development Of Hand-Glove Controlled Robot Arm System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Chan, Chun Yuan (2016) Development Of Control Strategy For Motion Control Of Pneumatic Muscle Actuator. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Chan, Lawrence Kum Peng (2016) Personal Development Leadership. Personal Development Leadership Management Corporation (M) Sdn.Bhd, Kuala Lumpur, Malaysia. (Submitted)

Chan, Shu Lee (2016) The Relationship Between Intrapreneurial Competencies, Personality And Innovative Work Behavior : Case Study Of Manufacturing Companies In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Swee Guan (2016) Development on copper to copper bonding optimization on low-k structure integrated circuit device. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chan, Yean Kwan (2016) Redesign Warehouse Storage And Retrieval System At Apparel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chandran, Devaagar (2016) Investigation Phenomena Of Flank Wear At Initial Stage During Cutting Process Of Stainless Stell 304. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chandren, Nushenthan Naidu (2016) Investigation To Maximize The Output Energy Of Single Axis Photovoltaic Solar Tracking System. Project Report. UTeM, Melaka, Malaysia.

Chang, Chu Shen (2016) Sleep Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ab. Hamid, Mohamad Nor Hafiz (2016) Develop Standardization Work Of Coil Setup At Pressing Machine : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ali, Fatin Shahieda (2016) Analysis And Development Of Low Power And Portable 12V DC To 220V AC Inverter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Che Harun, Muhammad Harraz (2016) Development Of A Mobile Robot Vision For Object Detection And Tracking Using Pixy Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Hassan, Che Haron and Mohd Amri, Sulaiman and Jaharah, A. Ghani and Mohd Shahir, Kasim and Effendi, Mohamad (2016) Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4817-4821. ISSN 1819-6608

Che Hassan, Siti Nuranisa (2016) Development Depth Video Processing Using Stereo Vision Technique In Sport Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Junoh, Sahida (2016) Design Of Model Reference Adaptive Control (MRAC) For Machine Tool Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Ku Mohd, Che Ku Nuraini (2016) Practical Learning Styles Approach On Personalised Learning Environment (PLE). PhD thesis, Universiti Teknikal Malaysia Melaka.

Che Manshor, Miftahuddin (2016) The Development Of Hydrogen Generator By Using Water Electrolysis For Small Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mat, Abdul Azim (2016) Development Of A New Die For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mat, Nurulasma (2016) The Adoption Of Mobile Banking Services Among Banking Users In Klang Valley. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Mood, Muhammad Amir Usamah (2016) Dielectric Sensing (Capacitive) On Cooking Oil's TPC Level. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Musa, Muhammad Faiz (2016) Fatigue Life Simulation Of Spot Weld Joint Structure Based On Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Roizimi, Muhamad Shafiq (2016) Development Of Cutting Technology For Cutting Polymer Foam Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan, Muhamad Farid (2016) CFD Simulation Of Fluid Flow Parameters In Junction Of Aircraft Hydraulic Pipe System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheah, Yee Mun (2016) Modeling Of Vibration Transmission And Prediction Of Structure-Borne Noise In Buildings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Cheah , Chin Puay (2016) Bottom up cost estimation model for project management in semiconductor industry. Masters thesis, Universiti Teknikal Malaysia Melaka .

Chee, Kiang Lam and Kenneth, Sundaraj and Mohd Nazri, Sulaiman and Fazilawati, A. Qamarruddin (2016) Virtual Phacoemulsification Surgical Simulation Using Visual Guidance And Performance Parameters As A Feasible Proficiency Assessment Tool. BMC Ophthalmology, 16 (1). pp. 1-9. ISSN 1471-2415

Chee, Wen Xiong (2016) Performance Analysis On Domestic Appliances Efficiency For Energy Saving Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chek San, Mohamad Khairul Azwan (2016) Design And Analysis Of SIW Bandstop Filter For Interference Suppression In X Band Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Jian Sing (2016) Implementation Of RSA Encryption And Decryption On FPGA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Wan Tin (2016) Determinants Of Brain Drain In Johor Bahru. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, Wei Chiat (2016) Five Axis Tool Path Programming Utilizing CATIA V5 Single Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Kai Mun (2016) Determination Of The Influence Of Chemical Treatment To The Strength Of FDM Used Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheong, Kar Mee and Hanipah, Hussin and R. Sudha, Nair and Noorzareith, Sofeia and Noriati, Abdul Kadir and Zainuddin, Jusoh (2016) The Relevance Of The Seven Premises Discussed By Fullan’s Change Theory In Higher Education In Malaysia. The Social Sciences, 11 (9). pp. 2206-2209. ISSN 1818-5800

Cheong, Kar Mee and Linda, Khoo Mei Sui and Zanariah, Jano and Hanipah, Hussin (2016) The Readiness Of The Administrators And Undergraduates In Using Massive Open Online Course (MOOC) In The Mandarin Subject. The Social Sciences, 11 (12). pp. 3017-3023. ISSN 1818-5800

Chew, Chin Ong (2016) Air-Conditioning & Mechanical Ventilation And Lighting Retrofit Through Building Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew, Yiying (2016) Automatic Suction Control Of Electrical Vacuum Cleaner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chi, Lai May (2016) Analysis And Improvement Of Extrusion Machine Breakdown In Solder Wire Manufacturing Operation Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chiew, Thiam Huat (2016) The Communication, Skill And Knowledge That Affect 5S Methodology Toward Performance Improvement In Paper Mill Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Cian Rhu (2016) Development Of Database And Website For Smart Queue Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kah Yin (2016) An Analysis Of Lard By Using Dielectric Sensing (Impedance). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kwang Yhee (2016) Energy Efficiency In Water Pumping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chon, Yu Yun (2016) Preparation And Characterization Of Nano-Alumina Filled HDPE Conducting Polymer Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Chee Soon and Rozaimi, Ghazali and Hazriq Izzuan, Jaafar and Sharifah Yuslinda, Syed Hussien and Yahaya, Md. Sam and Mohd Fua'ad, Rahmat (2016) Controller Parameter Optimization For An Electro-Hydraulic Actuator System Based On Particle Swarm Optimization Technique. Jurnal Teknologi, 78 (6-13). pp. 101-108. ISSN 0127-9696

Chong, Pei Yin (2016) Development Of Interactive Objects Using Unity 3D For Oculus Rift With Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Shin Horng and Kaiji, Sato (2016) Nominal Characteristics Trajectory Following Control As Practical Controller: A Review. IECON 2015 - 41st Annual Conference Of The IEEE Industrial Electronics Society. pp. 4790-4795. ISSN 978-147991762-4

Chong, Yoon Soon (2016) FPGA-Based Hexapod Robot Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Jia Huang (2016) Investigation Of The Effect Of Build Orientation On Mechanical Properties Of Fused Deposition Modeling Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Julian Hearn Young (2016) Adoption Of Lean Thinking To Reduce Wastage At Manufacturing Process Of SMEs In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chow, Jia Le (2016) Conceptual Design Of Mini Wind Turbine For Household Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Soo Hui (2016) The Development Of Wireless Power Transfer Technologies For Multiple Devices Using Inductive Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Yen Chun (2016) Development Of Portable Power Generator By Using Dynamo. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chu, Yen Chun (2016) Development Of Smart Domestic Electricity Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Lay Yang (2016) Motivation Attributes To Be Graduate Entrepreneur Among Technical University Student. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chun Woon, Chen (2016) Wireless Robotic Arm Control Using Myo-armband. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Colin, Burvill and Bruce, Field and Abdullah, Zulkeflee and Alias, Maizam (2016) Problem-Solving With Industrial Drawings : Supporting Formal Graphics Language Development For Malaysian Engineering Graduates. The International Journal Of Engineering Education, 32 (5). pp. 2172-2183. ISSN -

D

Dabas, Nurayati (2016) Factor Affects Customer Behavior During Currency Depreciation In Johor Bahru. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dahlan, Ainol Suhada (2016) Automatic Tyre Pressure Replenishing System Development Assisted By Mathematical Modelling And Finite Element Analysis. PhD thesis, Universiti Teknikal Malaysia Melaka.

Dalina, Johari and Vernon, Cooray and Mahbubur, Rahman and Pasan, Hettiarachchi and Mohd Muzafar, Ismail (2016) Characteristics Of Preliminary Breakdown Pulses In Positive Ground Flashes During Summer Thunderstorms In Sweden. Atmosphere, 7 (3). pp. 1-18. ISSN 2073-4433

Darmawan , Taufik Hidayat (2016) Effect Of Cloud On Solar Photovoltaic Module Output. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Daud, Fatma Fadhilah (2016) Analysis Of Car Hydronic Cooling System With Possibility Of Using Solar Power. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Said, Radzai and Subramonian, Sivarao (2016) A STUDY ON IMPACT BEHAVIOUR OF A NOVEL OIL PALM FIBRE REINFORCED METAL LAMINATE SYSTEM. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

Dhar malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A Study On Impact Behaviour Of A Novel Oil Palm Fibre Reinforced Metal Laminate System. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 2483-2488. ISSN 1819-6608

Din, Mazni (2016) Employer Branding And Its Influence On Employee Engagement: The Case Of Fabtronic Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Din, Mohd Zailani (2016) Brand Elements On Small Medium Enterprises (SMEs) Food Products And Their Impact Towards Consumer Purchase Intention. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ding, Yen Yen (2016) Development Of Smart Library System Using RFID. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ding, Yen Yen (2016) Development Of Smart Library System Using RFID. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Dol, Mohammad Shamrin (2016) Smartphone Control Legged Robot. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Dominic Merikan, Bonny Jinggut (2016) Simulation Of PV Solar Coconut Dehusking Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Don, Siti Nor Aishah (2016) Applying The Theory Of Acceptance Model (TAM) To Understand The Adoption Of Electronic Price Tags At Hypermarket In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dujong Inggom, Stephanie (2016) Inventory Management System For Multi Level Goods. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Dzulkafli, Siti Dzulaika (2016) To Analyse The Works Body Posture In Phn Industry Sdn Bhd Using Rula Assessment Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

E

Edris, Muhammad Zuhair Bolqiah (2016) Automated Deform Detection For Automotive Body Panels Using Image Processing Techniques. Masters thesis, Universiti Teknikal Malaysia Melaka.

Eh, Zheng Yi (2016) Design And Development Of A License Plate Recognition System Using Convolutional Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elmahi, Saad Ali Eltigani (2016) Fatigue Life Properties Of Alloy Steel At Different Stress Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyas, Talib and Mohd Asyadi ‘Azam, Mohd Abid (2016) An Extensive Study On Carbon Nanomaterials Electrode From Electrophoretic Deposition Technique For Energy Storage Device. Journal Of Materials Research, 31 (13). pp. 1972-1982. ISSN 0884-2914

Embi, Mohamed Amin (2016) Massive Open Online Course. openlearning. (Submitted)

F

Fadzli, Siti Nazatulsyima (2016) Optimal PID Controller Parameter For Coupled Tank System Using Priority Fitness Firefly Algorithm. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Fairul Azhar, Abdul Shukor and Raja Nor Firdaus Kashfi, Raja Othman and Mohd Luqman, Mohd Jamil (2016) Design Of A Linear DC Motor For High Thrust Constants Characteristics. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8764-8769. ISSN 1819-6608

Fairuz Fazillah, Shuhimi and Mohd Fadzli, Abdollah and Md Abul, Kalam and Masjuki, Hassan and Ashafi'e, Mustafa and Hilmi, Amiruddin (2016) Tribological Characteristics Comparison For Oil Palm Fibre/Epoxy And Kenaf Fibre/Epoxy Composites Under Dry Sliding Conditions. Tribology International, 101. pp. 247-254. ISSN 0301-679X

Faisal, Mohamad Fadli (2016) Human Pedestrian Detection For Surveillance System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Farah Khalidah, Abdul Rahman and Mohd Shakir, Md Saat and Liyana Hazwani, Zamri and Nor Mazidah, Husain and N. A., Naim and Siti Amirah, Mohd Padli (2016) Design Of Class-E Rectifier With DC-DC Boost Converter. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 89-95. ISSN 2180-1843

Farakkasi, Nursyafikah (2016) Characterization Of 5g Antenna At 38 Ghz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farhana, Abu Hussin and Badrul Hisham, Ahmad and Mohamad Zoinol Abidin, Abd Aziz and Mohamad Kadim, Suaidi (2016) Modified Printed Dipole With Reflector And Director. Jurnal Teknologi, 78 (6-4). pp. 137-140. ISSN 0127-9696

Farid Nasir, Abdul-Fattah (2016) Biodiesel Production Using Waste Cooking Oil Through The Microwave Irradiation And Conventional Method Using Cockle As Catalyst. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farn, Jia Hin (2016) The Influence Of Promotion Strategies Toward Consumer Loyalty Of Digi Post-Paid Users. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fatahurahman, Noor Atiqah (2016) Enhancing Performance Of WLAN At KPTM Batu Pahat Using Channel Assignment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ferland, Karshiff Sirinus (2016) 3D Milling Machine Using LEGO Mindstorm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Jia En and Chong, Shin Horng and Mohd Nor, Rozilawati and Loh, Ser Lee (2016) Positioning Control Of A One Mass Rotary System With CM NCTF Controller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (11). pp. 125-129. ISSN 2180-1843

Foo, Silvanus Kean Ming (2016) Adoption Of Eco-Fashion In Kuala Lumpur. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Wei Ming (2016) Portable Wireless Heart Rate Monitor For Elderly Patients. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Foo, Yeong Horng (2016) Optical And Photoelectrochemical Studies Of Tungsten Sulphoselenide (Wsse) Thin Films For Solar Panels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

G

Gerijih, Debie Devisser (2016) Prototype Development Of Thermal Comfort Level Control In A Medium Distance Flight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghazali, Muhamad Zulli Khairi (2016) Fingerprint Based Security Box Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghee, Yih Farn (2016) Development Of Hand Gesture Glove To Control Robot Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Boon Keat (2016) Research On Grit : The Important Of Grit Towards An Entrepreneur Long Term Succession In Melaka, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Chia Di (2016) The Study Of Rapid Dengue Antigen Detecting Method. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Goh, Siew Yun (2016) Analysis Of 20NM SOI NMOS Device With Different Gate Spacer Dielectric. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh, Siew Yun (2016) Development Of Self-Powered Thermoelectric Based Cooling System For LCD Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

H'ng, Jia Jiunn (2016) An Android Based Security Touring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Habeeb, Hiyam Adil (2016) Study On The Mechanical Properties Of Natural PLA And PLA Composites Fabricated By 3D Printing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hairol Nizam, Mohd Shah and Marizan, Sulaiman and Ahmad Zaki, Shukor and Mohd Zamzuri, Ab Rashid (2016) Vision Based Identification And Detection Of Initial, Mid And End Points Of Weld Seams Path In Butt-Welding Joint Using Point Detector Methods. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 57-61. ISSN 2180-1843

Hairol Nizam, Mohd Shah and Marizan, Sulaiman and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin and Mohd Zamzuri, Ab Rashid (2016) A Review Paper On Vision Based Identification, Detection And Tracking Of Weld Seams Path In Welding Robot Environment. Modern Applied Science, 10 (2). pp. 83-89. ISSN 1913-1844

Hairol Nizam, Mohd Shah and Mohd Zamzuri, Ab Rashid and Marizan, Sulaiman and Ahmad Zaki, Shukor (2016) Vision Based Identification And Classification Of Weld Defects In Welding Environment: A Review. Indian Journal Of Science And Technology (INDJST), 9 (20). pp. 1-15. ISSN 0974-6846

Hairuddin, Muhammad Shahmir (2016) Success Factor Of Frozen Food In Small And Medium Enterprise (SME) Under MARDI Guidance In Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halim, Nabilah (2016) Design Of Fuzzy-Pid Controller For Tracking Performance Of Machine Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Halinda, Musa and Namirah, Ab Rahim and Fadhlur Rahim, Azmi and Abdul Samad, Shibghatullah and Norfaridatul Akmaliah, Othman (2016) Social Media Marketing And Online Small And Medium Enterprises Performance: Perspective Of Malaysian Small And Medium Enterprises. International Review Of Management And Marketing, 6 (7S). pp. 1-5. ISSN 2146-4405

Hambaran , Omar Mukhtar (2016) Hybrid Software Architecture For Doctor-Patient Consultation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hamdan, Siti Nur Raheena (2016) Investigation Of Surface Integrity When Machining AISI 1045 Using Uncoated Carbide Cutting Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdan, Siti Syahirah (2016) Exploring Entrepreneur Of Food And Beverages Services In Melaka Deprived Area. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamdani, Muhammad Faris (2016) Develop Fuzzy Logic Controller For Prosthetic Hand. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Hamid, Nurul 'Atiqah (2016) New Fast Block Matching Algorithm Using New Hybrid Search Pattern And Strategy To Improve Motion Estimation Process In Video Coding Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hamizan, Abu Bakar and Mohamad Zoinol Abidin, Abd Aziz and Badrul Hisham, Ahmad and Azahari, Salleh and Suhana, Ghani and Phoo, Kho Shin and Nornikman, Hassan and Hamzah Asyrani, Sulaiman and Mohd Azlishah, Othman (2016) Design Of Linear And Circular Polarized Antenna For WLAN Application. Jurnal Teknologi, 78 (6-5). pp. 129-137. ISSN 0127-9696

Hamsani, Nurul Fatiehah (2016) Innovative Packaging Design To Enhance The Performance Toward Global Market At Bumiputra SME's Food Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Ahmad Sarudin (2016) Loose Col-Pick Equipment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Rostam Affendi and Ibrahim, Haidi (2016) Literature Survey On Stereo Vision Disparity Map Algorithms. Journal Of Sensors, 2016 (-). pp. 1-23. ISSN 1687-725X

Hamzah, Rostam Affendi and Ibrahim, Haidi and Abu Hassan, Anwar Hasni (2016) Stereo Matching Algorithm Based On Illumination Control To Improve The Accuracy. Image Analysis & Stereology, 35 (1). pp. 39-52. ISSN 1580-3139

Hamzah Asyrani, Sulaiman and Abdullah, Bade and Mohd Harun, Abdullah (2016) Inner AABB For Distance Computation In Collision Detection. Jurnal Teknologi, 78 (2). pp. 21-26. ISSN 0127-9696

Hanaffi, Farhan (2016) Grounding Grid Design For High Voltage Substation : An Assessment Of Effectiveness For Lightning Current. PhD thesis, Universiti Teknikal Malaysia Melaka.

Hanifah, Abdul Hamid and Mokhtar, Mohd Yusof (2016) Conceptualizing Global Cloud Landscape: A Review Of Adoption Issues And Challenges. Research Journal Of Applied Sciences, 11 (6). pp. 333-339. ISSN 1815-932X

Hanim, Abdul Razak and Hazura, Haroon and Siti Khadijah, Idris and Anis Suhaila, Mohd Zain and Fauziyah, Salehuddin and P. Susthitha, Menon and Sahbudin, Shaari (2016) Modeling Mach Zehnder Interferometer (MZI) Modulator On Silicon-On-Insulator (SOI). Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 121-124. ISSN 2180-1843

Hanizat, Nurhidayah (2016) A Study To Design And Fabricate A Prototype Of River Trash Collector System (RTCS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haris, Sharil Izwan (2016) Position Tracking Control Of Slider Crank Mechanism Using Fuzzy PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Harmali, Mohd Elfi Ezzry (2016) Dual Port Antenna With Single Radiator Element. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harriman, Razman and Azmi, Awang Md Isa and W.A.A., W. Razali and Mohamad Kadim, Suaidi and Mohd Shahril Izuan, Mohd Zin (2016) A Preliminary Study Of Characterization Techniques For Reticle ESD Threshold Voltage Measurement. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 53-57. ISSN 2180-1843

Harun, Ahmad Izzuddin (2016) The Profile Design Identification Based On Graphical Approach Forwards Cognitive Style. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Ahmad Syauqi Haikal (2016) Study Of Engine Performance Effect Using Variable Air Filter On Perodua Viva 1.0 Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Hafizul Abdullah (2016) OCDMA Network Performance Using Various Detection Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Harun, Mohamad Haniff and Al-Amani, Umar and Nor Hamizah, Miswan and Hamzah, Khairum and Ahmad Zubir , Jamil and Abdullah, Rohana and Yusoff, Mohd Rahimi (2016) Final Year Student’s Perception before Engaging Engineering Technology Program in UTeM. INTERNATIONAL JOURNAL OF ENGINEERING TECHNOLOGY AND SCIENCES. pp. 85-89. ISSN 2462-1269

Harun, Nurfarahani (2016) Hybrid Vehicle (HV) Engine Vibration Sources Detection And Identification Using Time-Frequency Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Mohd Syarifuddin (2016) The Influence Of Creative Personality And Entrepreneurial Intention Among Non-Management Undergraduates. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasan, Nor Halim (2016) Development Of Performance Standard For Circular Ducting Local Exhaust Ventilation System At Workplace. PhD thesis, Universiti Teknikal Malaysia Melaka.

Hasbullah, Nor Wahida (2016) Waste Reduction In Healthcare Department By Implementing Value Stream Mapping Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Hadi Fakhir (2016) Design And Analysis Of A Series Active Power Filter Based On Hysteresis Controller For Power Quality Improvement. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Muhammed Noor (2016) An Optimization Of Drag Reduction Of An Automotive Roof Box. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hashim, Umira Syafika (2016) Effect Of Chilled Air Coolant On Surface Roughness And Tool Wear When Machining 2205 Duplex Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasim, Norhaslinda and Chong, Shin Horng and Khor, Hooi Khee (2016) Disturbance Observer-Based Motion Control For A Simple Direct Drive System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (5). pp. 41-47. ISSN 2180-1843

Hassan, Aslinda and Bahaman, Nazrulazhar (2016) PROACTIVE MULTI-COPY ROUTING PROTOCOL FOR URBAN VEHICULAR AD HOC NETWORK. ARPN Journal of Engineering and Applied Sciences, 11 (5). pp. 3156-3160. ISSN 1819-6608

Hassan, Mohsin A. (2016) Structural Analysis Of Shape-Morphing Aircraft Slat By Using Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Nornikman (2016) Enhancement Performance Of Split Ring Resonator Structure On Microstrip Patch Antenna. PhD thesis, Universiti Teknikal Malaysia Melaka.

Hassanudin, Jihad Salihin (2016) Development Of Automated River Trash Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hassim, Norain (2016) Factors Affecting Customer Satisfaction In Fast Food Restaurants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hayfaa, Mohammed Hussein Hasan and Marizan, Sulaiman and Mohammed Rasheed, Jubair Al-Hiealy and Rosli, Omar and Mohd Shahrieel, Mohd Aras (2016) Comparative Studies Of Fuzzy Logic Base Power System Stabilizers In Enhancing Dynamic Stability Of A Generator Connected To Infinite Bus. World Applied Sciences Journal (WASJ), 34 (10). pp. 1370-1379. ISSN 1818-4952

Hayom, Hifzhan (2016) PC-Based Heart Rate Monitor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazizi, Muhammad Zharif Syafiq (2016) Notable Fiber Optic Sensor Development For Petrol Oil Detection Base On Time Frame Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hazura, Haroon and Hanim, Abdul Razak and Nurul Nadia, Abd Aziz (2016) Performance Enhancement Of Optical Microring Resonator Using Taguchi Method Experimental Design. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3212-3216. ISSN 1819-6608

Hazura, Haroon and Nadia, A. A. and Hanim, Abdul Razak and Anis Suhaila, Mohd Zain and S. K., Othman and Fauziyah, Salehuddin (2016) Optical Routers Based On Microring Resonator For Optical Networks-On-Chip. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 41-44. ISSN 2180-1843

Hazura, Haroon and Nurul Nadia, Abd Aziz and Hanim, Abdul Razak and Anis Suhaila, Mohd Zain and S. K., Othman and Fauziyah, Salehuddin (2016) MRR Filter Characterizations In WDM System For Digital Signals Transmissions. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 29-32. ISSN 2180-1843

Hee, Wai Keat (2016) Design And Analysis On The Robust Control Of A X-Y Ballscrew Mechanism. Masters thesis, Universiti Teknikal Malaysia Melaka.

Heng, Soo Ann (2016) Improvement Of Molding Process Scheduled Downtime Reduction For Integrated Circuits Package DPAK STS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hidayah, Rahmalan and Zaheera, Zainal Abidin and Zuraida, Abal Abas and Ahmad Fadzli Nizam, Abdul Rahman and Abdul Samad, Shibghatullah and Ong, Rhui Yong (2016) Prototype Deployment Of Examination And Quiz System (EQs) With Outcome Based Education In Networking System. 2015 IEEE International Conference On Communication, Networks And Satellite (COMNESTAT). pp. 43-47. ISSN 978-146738249-6

Hii, Hie Kee (2016) Electromyography (EMG) Analysis Of Backpack Weight On Muscle Activities Of The Lower And Upper Extremity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hisham, Nur Syahirah Syafiqah (2016) Optimization Of Fiber Optic Acetone Sensor By Using Taguchi Method For Diabetics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hishamuddin, Azreen Hanieza (2016) The Relationship Between Entrepreneurial Orientation And Organisational Performance In Small And Medium Enterprise (SMEs). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hishamuddin, Muhammad Amir 'Afifi (2016) Indoor Air Quality Of Classroom (Level 1) Of Faculty Of Mechanical Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hithayatullah, Muhammed Fayazullah (2016) Smart Gas Leakage Alert System Using Global System For Mobile With A Short Message. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Chee Huay (2016) Lean manufacturing and OEE optimization of semiconductor industry through scheduled downtime reduction at testing process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ho, Wen Quan (2016) Piezoelectric Based Self-Powered Force Detection System With Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hong, Alvin Phing Yean (2016) Equity Crowdfunding In Malaysia : An Implementation Of Setting Valuations. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hoo, Jian Ea and Lim, Kim Chuan (2016) Accuracy And Error Study Of Horizontal And Vertical Measurements With Single View Metrology For Road Surveying. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7872-7876. ISSN 1819-6608

Hossain, Md Liton (2016) Multilevel Three Phase Voltage Source Inverter With Simple Space Vector Pulse Width Modulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

How, Pei Yee (2016) Green Marketing Practice And Its Effect On Small And Media Enterprises Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hu, Zhen Han (2016) The Development Of Data Acquisition System Using Arduino And MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Huasin, Mohammad Hizwan Shah (2016) Gen Y Purchasing Power Of Technology Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husain, Nor Mazidah (2016) Electrical Vehicle Charging Through Inductive Power Transfer (IPT) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husainiamer, Maryam Afifah (2016) Development Of 3D Image Vizualization And Diagnosis System For Stroke Patients Based On Magnetic Resonance Imaging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husin, Mohd Amirhafizan (2016) Effects Of Fiber Reinforcements Weave Patterns On The Mechanical Properties Of Hybrid Intraply Lamina. Masters thesis, Universiti Teknikal Malaysia Melaka.

Husin, Muhammad Syafiq (2016) Speed Limit Detection For Vehicle Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Husin, Nur Aqilah (2016) To Study The Development Of Reverse Engineering Technology That Using Common Consumer Electronic Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hussein, Sadiq Aziz (2016) The Process Parameter Effects On Hybrid Structure Of Dissimilar Materials Made By Friction Stir Welding. PhD thesis, Universiti Teknikal Malaysia Melaka.

Hussein, Saif Tahseen (2016) Dynamic Economic Dispatch For Power System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Huzainirah, Ismail and Fazlli, Patkar and Auzani, Jidin and Sundram, Ramahlingam and Muhd Khairi, Abd Rahim and Yusnida, Ahmad Tarmizi and Atikah, Razi (2016) Direct Torque Control Of Induction Machine Using 3-Level Neutral Point Clamped Inverter. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 571-576. ISSN 978-146739572-4

I

Ibrahim, Abdiwahab Abshir (2016) Development Of A New Environmental Framework For Manual Wheelchair Using Analytical Hierarchy Process (Ahp) In Product Development. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Azhar (2016) Antilock Braking System Control Using Fractional Gain PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Mimi Dalina (2016) The Readiness Level On Conducting Penetration Testing Among Network Admin In Kolej Poly Tech Mara. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Noor Haya (2016) Preliminary Study On Elastic Profile Of Mix Coconut Fibre And Polyester Resin As Composite Fibre Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ibrahim, Siti Athirah Raihan (2016) Rear And Side Under Carriage Safety Bars For Malaysia Heavy Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, M. Idzdihar (2016) Instability of phosphorous doped SiO2 in 4H-SiC MOS capacitors at high temperatures. Journal of Applied Physics, 120 (214902). pp. 1-10. ISSN 0021-8979

Idris, Mohd Fitri (2016) Theoretical Knowledge Versus Practical Skills : Future Graduates Dilemma In Real Working Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Idris, Nurul Syazwani (2016) Multi-Objective Of Optimal Distribution Network Reconfiguration By Using Modified Artificial Bee Colony Alorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idris, Nurul Syazwani (2016) Multi-Objective Of Optimal Distribution Network Reconfiguration By Using Modified Artificial Bee Colony Alorithm. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Idris, Syahril Anuar (2016) Development Of Pipeline Corrosion Inspection System Using Machine Vision. PhD thesis, Universiti Teknikal Malaysia Melaka.

Ilime, Muhammad Iqbal (2016) Temperature Monitoring Of Water Pump Relative To The Effect Of Flowrate In Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irda, Roslan and Takahiro, Kawasaki and Toshiki, Nishiue and Yumi, Takaki and Chikara, Ohta and Hisashi, Tamaki (2016) Control Of Transmission Power And Carrier Sense Threshold To Enhance Throughput And Fairness For Dense WLANs. 2016 International Conference On Information Networking (ICOIN). pp. 51-56. ISSN 1976-7684

Ishak, Aliff Rahmani (2016) Design And Modelling Of Portable USB Charger Using DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Amru Shahril (2016) Wireless Phone Charger By Using Inductive Charging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ishak, Muhammad Ariff (2016) Biofuel Fire Starter From Empty Fruit Bunches Of Oil Palm Fruit Waste. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohamad Fathin (2016) Smart Care Plant Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Mohd Khairy (2016) Design And Analysis Of Modified-Proportional Fair Scheduler For LTELTE-Advanced. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Muhammad Ashrafi (2016) Hybrid Vehicle (HV) Chassis Vibration Sources Detection And Identification Using Frequency Domain Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Haziq (2016) Experimental Investigation Of Rear Sprocket Failure Of A Fixed Bicycle Using Acoustic Emission And Vibration Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Muhammad Syafwan (2016) Fall Detection And Alert System For Home Alone Elderly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nor Shahirah (2016) Design And Development Of Table Napkin Folding Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Norhidayah (2016) The Application Of Nanotechnology In The Semiconductor Industry : The Case Of Advanced Micro Devices (AMD) Global Services Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nur Syahmi (2016) Development Of An Eye Gaze Detection For Neuro-Linguistic Programming (NLP) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Nurul Atiqah (2016) Accurate Real Time Detection For Halal Logo Based On Fourier Magnitude Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Ruhaimee (2016) Portable Weather Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail, Shahrul Azwan (2016) Comparisons Of Mechanical Properties Between Pure Polypropylene And Polypropylene Filled With Talc Using Single Gate And Twin Gate Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Najwa (2016) Development Of A Road Line Detection Algorithm For Monitoring Driving Pattern. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Iswaji, Ahmadee Abunur (2016) Development Of Transport Information System Using Push Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Ja'afar, Muhammad Waris (2016) Optimization Of Biodiesel Production From The Waste Cooking Oil Using Response Surface Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jabar, Juhaini and Asung, Zillah (2016) FACTORS AFFECTING THE SOCIAL INNOVATION INTENTION OF UNIVERSITY STUDENTS THROUGH SOCIAL ENTREPRENEURSHIP PROGRAMS. unpublished. (Unpublished)

Jacob, Lisa Matius (2016) Development Of Vacuum Clamping For Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaharah, A. Ghani and Che Hassan, Che Haron and Mohd Shahir, Kasim and Mohd Amri, Sulaiman and Siti Haryani, Tomadi (2016) Wear Mechanism Of Coated And Uncoated Carbide Cutting Tool In Machining Process. Journal Of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914

Jamadin, Rafizah (2016) The Management In Performance Of Variation Order On Construction Work. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalludin, Farhan Ismat (2016) Examining The Impact Of Firm's Socio Technical System And Organization Culture On Shift Work Problem In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaluddin, Muhammad Herman and Shukor, Ahmad Zaki and Miskon, Muhammad Fahmi and Ali @ Ibrahim, Fariz and Redzuan, Muhammad Qamarul Arifin (2016) An Analysis Of Sensor Placement For Vehicle’s Blind Spot Detection And Warning System. Journal of Telecommunication, Electronic and Computer Engineering, 8 (7). pp. 101-106. ISSN 2180-1843

Jamaludin, Muhammad Luqman (2016) FTK Emergency Light Monitoring System Using Wifi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Nurul Izati (2016) Fiber Optic Sensor Of Glucose Level Detection For Various Bicarbonate Drink. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Chiew , Tsung Heng and Abdullah, Lokman and Salleh, Mohd Rizal and Arep@Ariff, Hambali (2016) Design And Analysis Of Super Twisting Sliding Mode Control For Machine Tools. Jurnal Teknologi , 78. pp. 25-29. ISSN 2180-3722

Jamalulil, Nur Halimah (2016) Implementation Of Quick Response (QR) Code In Cloud Manufacturing (CM) Framework. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamalullia, Nor Iqlima Izzaty (2016) Factors That Influence The Online Purchasing (e-Shopping) And The Customer Satisfaction Towards Online Purchasing Among UTeM Students. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamalussaid, Abdul Qahir Wahidi (2016) Establishment Of Standard Cycle Time And Production Target For The Manufacturing Of Telekom Malaysia Berhad (TM) Metal-Based Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jarkasi, Muhamad Aref (2016) The Influence Of Servicescape On Customer Loyalty In Fast Food Restaurants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasmee, Solehah (2016) Design And Fabrication Of Vibration Experimental Test Rig For Teaching And Learning. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Jasmi, Md Nur Ariff (2016) Development Of Conveyor Tower Light Alarm Signal And Monitoring System In Factory Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jasni, Burhanuddin Helmy (2016) Design Low-Cost Sensor For Bluetooth Embedded System To Monitor Body Posture During Workout Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jayaganasan, Narayanasamy and Lau, Kok Tee and Muhammad Zaimi, Zainal Abidin (2016) Transistor Package’s Boron Nitride Film Microstructure And Roughness: Effect Of EPD Suspensions’ pH And Binder. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 8 (2). pp. 99-104. ISSN 2180-1843

Jayahkudy, Raguvaran (2016) Application Of Bio-Glycol To Inhibit Natural Pressure Loss In Automotive Type. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jeffri, Nurain Syafinaz (2016) Trademark As The Marketing Tools To Enhance Small And Medium Enterprise (SME) Image. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jiga, Iviana (2016) Online Booking Systems To Manage Queue At Road Transport Department. Masters thesis, Universiti Teknikal Malaysia Melaka.

Johar, Ameer Hafetz (2016) Fatigue Analysis On Centrifugal Wheel Component Of Automatic Blasting Machine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Johari, Mohammad Nazrin (2016) Optimization Process Of T-Shaped Microstrip Antenna Performance For Broadband. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johari, Muhammad Izamudin (2016) Design And Development Of Home Based Solid Waste Incinerator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Nabilah , Mat Kassim and Manap, Mustafa and Ngatiman, Nor Azazi and Yusoff, Mohd Rahimi (2016) Localization Of Multiple Harmonic Sources For Inverter Loads Utilizing Periodogram. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 87-91. ISSN 2180-1843

Juanna, Beh Jen Ann (2016) The Development Of Responsive Kid-Friendly Web Framework (Kidsstyle). Masters thesis, Universiti Teknikal Malaysia Melaka.

Jubair Al-Hiealy, Mohammed Rasheed and Omar, Rosli and Sulaiman , Marizan (2016) Design And Development Of Dc-Dc Boost Converter Based On Dsp Tms320f2812 For Pv Application. Indian Journal Of Science And Technology (INDJST), 9 (44). pp. 1-13. ISSN 0974-6846

Jumaat, Faizal Azli (2016) Investigation On The Mechanical Properties Of Hybrid Fibre Metal Laminate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties. International Journal of Biological Macromolecules. pp. 575-581. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Effect of seaweed on physical properties of thermoplastic sugar palm starch/agar composites. Journal of Mechanical Engineering and Sciences (JMES). pp. 2214-2225. ISSN 2289-4659

Jumali, Muhammad Syafik (2016) The Influence Of Tool Geometry Towards Cutting Performance On Aluminium 7075. Masters thesis, Universiti Teknikal Malaysia Melaka.

Junaidi, Noor Juliza (2016) Studies On Surface Cleaning Method For Best Strenght Of Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Junainah, Sardi and N., Mithulananthan and Duong, Quoc Hung (2016) A Loss Sensitivity Factor Method For Locating ES In A Distribution System With PV Units. In: IEEE PES Asia-Pacific Power And Energy Engineering Conference, APPEEC 2015, 15-18 November 2015, Brisbane Convention And Exhibition CentreBrisbane; Australia.

Jurifa, Mat Lazi (2016) Sensorless And Independent Speed Control Of Dual-PMSM Drives Using Five-Leg Inverter (FLI). PhD thesis, Universiti Teknikal Malaysia Melaka.

Jurifa, Mat Lazi and Zulkifilie, Ibrahim and Marizan, Sulaiman and Azziddin, Mohamad Razali and Norazelina, Kamisman (2016) Independent Control For Dual-PMSM Drives Using Five-Leg Inverter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 143-148. ISSN 978-147998598-2

Jusoh, Ahmad Jazli (2016) The Study Of Effect Of Engine Performance Using Different Fuel For Perodua Viva. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jusoh, Nur Ajeerah (2016) Study On Effect On Intake Air Filter System On Engine Performance On Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jusoh, Nurhidayah (2016) The Impact Of Social Media Application Towards Consumer's Decision Making For Skincare Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

K

K., Rajammal and Sivakumar, Dhar Malingam and Navaneethan, Duraisamy and K., Ramesh and S., Ramesh (2016) Effect Of Sintering Temperature On Structural Properties Of LiMnPO4 Cathode Materials Obtained By Sol–Gel Method. Journal Of Sol-Gel Science And Technology, 79. pp. 1-9. ISSN 0928-0707

K.Mariappan, Selvakumar (2016) Application Of Distribution Automation System (DAS) For Low Voltage Substation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kadhim, Ghassan Jawad (2016) Water Treatment Plants (WTPs) With High Efficiency Motors (HEMs) And Variable Speed Drives (VSDs). Masters thesis, Universiti Teknikal Malaysia Melaka.

Kadhim, Kamil Jawad (2016) Effect Of Coating Thickness On The Microstructure, Mechanical And Wear Properties Of A1TiN Coatings Deposited Using Arc Ion Plating Technique. PhD thesis, Universiti Teknikal Malaysia Melaka.

Kahar, Muhammad Addey (2016) Assessment On The Impact Of Distributed Generation On Grid's Power Factor Compensation By Using Power World Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kalam, Muhammad Faiz (2016) Design And Development Of Finger-Vein Capture Device Using Arduino Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal , Khairul Anwar (2016) Development Of Android Application To Monitor Power Consumption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Ariffin, Nurul Atirah (2016) Physical And Mechanical Properties Of Polypropylene/Reclaimed Rubber Compound. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamal Bahrain, Safiza Suhana (2016) A Query-Driven Spatial Data Warehouse Conceptual Schema For Disaster Management. PhD thesis, Universiti Teknikal Malaysia Melaka.

Kamar Din, Tasnim (2016) Effect Of Carbon Nanofiber Nanofluid On Turning Of D2 Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamaruddin, Firdaus (2016) The Effectiveness Of Multimedia Coursewave In Typography Subject. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamaruddin, Noor Fathin Nabila (2016) Distribution Network Reconfiguration (DNR) And Voltage Stability Analysis For Radial Distribution Network Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin, Noor Fathin Nabila (2016) Distribution Network Reconfiguration (DNR) And Voltage Stability Analysis For Radial Distribution Network Using Improved Genetic Algorithm (IGA). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Kamaruddin , Ain Zulaikha (2016) Smart Child Notification System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Hanis Zafirah (2016) Design On Rainfall's Vibration Based Power Generation Module For Rural Area In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Anuar, Nur Liyana (2016) Piezoelectric Energy Harvesting Floor Mat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarul Ariffin, Abd Rashid and Mohd Nor, Husain and Muhammad Majdi, Saad and Mohamad Zoinol Abidin, Abd Aziz and Nornikman, Hassan (2016) Compact Circular Polarized Antenna Design With H-Shaped Slots And Stair Notches For Wireless LAN Application Of 2.4 GHz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 13-17. ISSN 2180-1843

Kamarularifin, Azwin (2016) The Effectiveness Of The T-Shirt Business Start-Up Branding Through Online Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamat, Seri Rahayu and Mahmood, Noor Shakir and Ajmi, Ahmed Ali (2016) Review And Establishing Framework Model To An Adoption Of ISO 50001 Energy Management System In Power Stations. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). pp. 67-78. ISSN 1985-3157

Kamsani, Silah Hayati (2016) Improvements On The Bees Algorithm For Continuous Optimisation Problems. PhD thesis, Universiti Teknikal Malaysia Melaka.

Karis, Mohd Safirin and Abdul Razif, Nur Rafiqah and Mohd Ali, Nursabillilah and Rosli, M. Asyraf and Mohd Aras, Mohd Shahrieel and Md Ghazaly, Mariam (2016) Local Binary Pattern (LBP) With Application To Variant Object Detection: A Survey And Method. 2016 IEEE 12TH INTERNATIONAL COLLOQUIUM ON SIGNAL PROCESSING & ITS APPLICATIONS (CSPA2016), - (-). pp. 221-226. ISSN -

Karis, Mohd Safirin and Mohd Saad, Wira Hidayat and Mohd Ali, Nursabillilah and Khor, Chin We and Abdul Razif, Nur Rafiqah (2016) Fruit Sorting Based On Machine Vision Technique. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 31-35. ISSN 2180-1843

Karuppiah, K.Vasanthan (2016) Improving OEE Data Quality By Automated Data Collection Through Identifying Productivity Potentials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kasdirin, Hyreil Anuar (2016) Adaptive Bio-Inspired Firefly And Invasive Weed Algorithms For Global Optimisation With Application To Engineering Problems. PhD thesis, Universiti Teknikal Malaysia Melaka.

Kasiappan, Gopalasamy (2016) Disaster Remote Messaging System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, A.N. and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar malingam, Sivakumar (2016) Mechanical Properties Of Polypropylene Composites Reinforced With Alkaline Treated Pineapple Leaf Fibre From Josapine Cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2180-1606

Kasim, Mohd Fahkri Allauddin (2016) Enhancement On The Overall Mechanism Of Smart Drying System For Clothes-Green Technology Adaptation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kasim, Rizanaliah and Abdullah, Abdul Rahim and Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Ramli, Mohd Zulkifli (2016) Nickel-Cadmium Battery Analysis Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3975-3979. ISSN 1819-6608

Kasim, Rizanaliah and Abdullah, Abdul Rahim and Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Ramli, Mohd Zulkifli (2016) Nickel-Cadmium Battery Analysis Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3975-3979. ISSN 1819-6608

Kasno, Mohammad `Afif and Mohd Aras, Mohd Shahrieel and Yeoh, Eik Keong and Abdul Azis, Fadilah and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2016) Design Analysis Of Remotely Amphibian Vehicle (RAV) – Underwater Drone. Jurnal Teknologi, 76 (1). pp. 1-5. ISSN 0127-9696

Kassim, Dg Hafizah (2016) Study On Improving The Acoutics Performance Of Masjid Sayyidina Abu Bakar UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kazuki, Tange and Shinfuku, Nomura and Shinobu, Mukasa and Hiromichi, Toyota and Syahrial, Fadhli (2016) Effect Of Pretreatment By Sulfuric Acid On Cellulose Decomposition Using The In-Liquid Plasma Method. Journal Of The Japan Institute Of Energy, 95 (12). pp. 1105-1109. ISSN 0916-8753

Kee, Kai Hung (2016) Redesign Of Polar Cutting Workstation In Paper Cups Manufacturing Industry Using Ergonomics Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kee, Wan Xuan (2016) Monte Carlo Simulation Based Optimization For Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kemat, Siti Zuraiha (2016) Home Cooking Oil Filter Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Anwar, Norliyana (2016) A Development Of Wind Turbine Generator Using Waste Energy For Domestic User. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairil Ezwan, Kaharudin and Fauziyah, Salehuddin and Anis Suhaila, Mohd Zain and Muhammad Nazirul Ifwat, Abd Aziz and I., Ahmad (2016) Application Of Taguchi Method With The Interaction Test For Lower DIBL IN WSix/TiO2 Channel Vertical Double Gate NMOS. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7093-7103. ISSN 1819-6608

Khairul Anwar, Ibrahim and Mau, Teng Au and Gan, Chin Kim (2016) Generic Characteristic Of Medium Voltage Reference Network For The Malaysian Power Distribution System. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 204-209. ISSN 978-146739572-4

Khairul Masri, Mohamad Hisham (2016) Modelling And Analysis An Overcurrent Protection In A Power System Netwrok Using PSCAD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairul Masri, Mohamad Hisham (2016) Modelling And Analysis An Overcurrent Protection In A Power System Netwrok Using PSCAD. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Khairulazdan, Nur Khairunisya (2016) Study And Analysis Of Cognitive Style Towards The Affective Design In Kansei Engineering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalaf, Aswaq Abdulameer (2016) Analysis Of Continuous And Discrete Control Systems Using PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khaleel, Mohamed Adnan (2016) An Investigation Of Car Bumper With Respect To Impact Energy Absorption. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khalid, Mohd Syakirin (2016) Development Of Automotive Air Scoop Micro Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalid, Syazana Itqan and Ahmad Radzi, Syafeeza and Mohd Saad, Norhashimah and Abdul Hamid, Norihan and Mohd Saad, Wira Hidayat (2016) A Review On Finger-Vein Biometrics Identification Approaches. Indian Journal Of Science And Technology (INDJST), 9 (32). pp. 1-8. ISSN 0974-6846

Khamis, Alias and Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Ab Ghani, Mohd Ruddin and Abdul Rahim, Mohd Nazarul Affan (2016) Analysis Of Microturbine And Battery Storage System In Grid-Connected And Off-Grid Operations. International Review of Automatic Control (IREACO), 9. pp. 269-278. ISSN 1974-6067

Khamis, Noorli and Ahmadi, Nurul Aqilah and Jano, Zanariah (2016) Analyzing Crucial Elements Of Research Data Management. International Business Management, 10. pp. 3847-3852. ISSN 1993-5250

Khor, Chin We (2016) Fruit Sorting By Machine Vision Technique. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Khosim, Muhammad Basiir (2016) Development Of Car Detection System Using Ultrasonic Sensing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khudhair, Ahmed Qays (2016) Physical-Mechanical Properties Of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kindamas, Zackris (2016) Assessment Effect Of Commercial Oil Additives (COA) On Engine Lubricant For Four-Stroke Motorcycle Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

King, Ivy Chien Chien (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kinn Sheng, Vincent Yap (2016) Development And Analysis Of Head Tracking System For Robotic Wheelchair Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Koo, Ming Ciat (2016) Portable Dual-Axis Solar Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koshila Devi, Sivakumar (2016) Degradation behavior of pineapple leaf fibre (PALF) reinforced biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ku Abd Rahim, Ku Raihah Saiyidah (2016) Application Of Fibre Optic Sensor (FOS) For Various Cooking Oil Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kyairul Azmi, Baharin and Hasimah, Abdul Rahman and Mohammad Yusri, Hassan and Gan, Chin Kim (2016) Short-Term Forecasting Of Solar Photovoltaic Output Power For Tropical Climate Using Ground-Based Measurement Data. Journal Of Renewable And Sustainable Energy, 8 (5). -. ISSN 1941-7012

L

Lai, Chii Chung (2016) Effect Of Surface Functionalization By Naoh On Electrophoretic Deposition Of H-BN Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lai, Pooi San (2016) Building Up Customer Loyalty In Hospitality Industry Through CRM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lam, Ying Ying (2016) Speech-To-Text Converter System For Teaching And Learning Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latip, Muhammad Fadhilullah (2016) Development Of Solar Powered System For Irrigation In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latip, Nur Amirah (2016) High Performance 3-Dimensional Waveguide Cavity Bandpass Filter Operates At 5.1 Ghz For Spectrum Analyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Latip, Ramlan (2016) Coordinated Control Of A Back-ToBack HVDC Link. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lau, Ban Pin (2016) Lean Production Increase Overall Equipment Efficiency In Manufacturer Paper And Paper Product Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Kok Tee and T. Joseph Sahaya, Anand and Charles C., Sorrell (2016) Protonation Of The Polyethyleneimine And Titanium Particles And Their Effect On The Electrophoretic Mobility And Deposition. Materials Chemistry And Physics, 182. pp. 359-364. ISSN 0254-0584

Lau, Wei Ling (2016) Examining The Impact Of Electronic Performance Appraisal On Employee Productivity In Organization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Zhi Shen (2016) The Impacts Of Enablers Toward Cultivation In Knowledge Worker Through Knowledge Sharing Processes In SME Melaka, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau , Cheiw Yun and Chin, Kim Gan and Salam, Zainal and Sulaima, Mohamad Fani (2016) Impact Of Solar Photovoltaic System On Transformer Tap Changer In Low Voltage Distribution Networks. ENERGY PROCEDIA, 103 (-). pp. 58-63. ISSN -

Lau , Kok Tee and Mohd Shahadan , Mohd Suan and M., Zaimi and Jeefferie , Abd Razak (2016) Microstructure And Phase Of Poly (Vinyliden Fluoride) Films By Electrophoretic Deposition:Effect Of Polymer Dispersion Stirring Conditions. Journal Of Advanced Manufactruring Technology, 10 (1). pp. 57-66. ISSN 1985-3157

Law, Mei Lin (2016) Preparation And Characterization Of Recycled Carbon/Fibercarbon Nanotube Reinforced Epoxy Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lee, Chee Keen (2016) Optimization Of Geometric Design Of A Linear Type Motion Electrostatic Actuator Using Finite Element Method (FEM). Project Report. UTeM, Melaka, Malaysia . (Submitted)

Lee, Chia Wei (2016) Modelling Of Front Suspension Module Using Flexible MBD Motion View. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Hee Nian (2016) Baby Care Alarm System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jian Der (2016) Baby Health Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Jun Wei and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin (2016) Investigation On Standardization Of Modal Space By Ratio For MDOF Micro-Macro Bilateral Teleoperation Control System. Modern Applied Science, 10 (11). pp. 98-109. ISSN 1913-1844

Lee, Jun Wei and Shukor, Ahmad Zaki and Jamaluddin, Muhammad Herman (2016) Investigation On Mdof Bilateral Teleoperation Control System Using Geared Dc-Motor. Modern Applied Science, 10 (11). pp. 54-66. ISSN 1913-1844

Lee, Pei Jing (2016) Optimizing Ceramic Shell Thickness To Enhance Its Permeability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Shi Guo (2016) Effect Of Cold Arc To Deflection In Continuous Welding Of Thin Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Siew Theng (2016) Antecedent And Consequences Of Market Orientation Towards Business Performance In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Song Jin (2016) Design Of Noise Insulator For Metal Stamping Operation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Su Wing (2016) Evaluation Of ANN And CNN In Gesture Classification For Myoelectric Prosthesis Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wan Cin (2016) Smart Home Establishment For Sustainable Property Development : A Case Study At IOI Properties Group Berhad. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Wen Long (2016) Cyclic Voltammetry Analysis Of Tungsten Sulpho Selenide (WSSe) Thin Films By Electrochemical Route. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yeh Yee (2016) Modelling Assembly For Production Line Output : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Yi Pei (2016) Ultrasonic Smart Cane For Visually Impaired People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, You Hui (2016) Energy scavenging for mobile and wireless devices using high-efficiency rectifier circuit. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Jun Wei (2016) Scaling Of MDOF Micro-Macro Bilateral Control Teleoperation System Using Standardized Modal Space. Masters thesis, Universiti Teknikal Malaysia Melaka.

Leong, Shu Teng (2016) Modelling And Characterization Of Stone Wool Fibre Reinforced High Density Polyethylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Leow, Leowanie Sui Qin (2016) Big Data : Merging Diverse Production Files In Manufacture Of Electronic Components And Boards Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liao, Shing Wen (2016) Design And Development Of SEMG Acquisition System Using NI MyRIO For Prothesis Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liaw , Geok Pheng (2016) Temperature Control And Investigation Of Parabolic Dish Based Concentrating Solar Power (CSP) In Malaysia Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Liaw , Geok Pheng and Ab Ghani, Mohd Ruddin and Chin, Kim Gan and Tole, Sutikno (2016) Temperature Control Of The 25kw Parabolic Dish-Stirling Engine System. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 14 (3). pp. 800-806. ISSN 1693-6930

Liaw , Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2016) Study The Feasibility Of Parabolic Dish (Pd) From Several Prospective Criteri In Malaysia Environment. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3929-3937. ISSN 1819-6608

Liew, Aaron Yu Qin (2016) iBeacons Localization For Indoor Coordination (Retail Sales). Project Report. UTeM, Melaka, Malaysia . (Submitted)

Liew, Fu Hua (2016) Development Of AC Power Control Using Smartphone Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Pay Jun and Abdul Razak, Muhammad Raziman and Hussein, Nur Izan Syahriah and Ahsan, Qumrul (2016) Experimental Investigation Of Electrical Discharge Machining Using Dielectric Fluid With Surfactant And Different Carbon Additives. International Journal Of Applied Engineering Research, 11 (15). pp. 8507-8510. ISSN 0973-4562

Liew, Siaw Hong (2016) EEG-Based Person Authentication Modelling Using Incremental Fuzzy-Rough Nearest Neighbour Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Liew, Wai Chun (2016) Mind Controlled Computer Game Using EEG Signals. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Weng Tack (2016) Structural And Electronic Properties Of Metal Oxides Attached To Single-Walled CNT As Li-Ion Battery Electrode By Using DFT. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Zhe Xiong (2016) Design Improvement Of 1 TERAS Sabit With Finite Element Analysis (FEA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chia Roeng (2016) Investigate And Optimize The Vivaldi Antenna For Ultra-Wideband Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chiew Jie (2016) Application Of Triz And ANP In Selecting The Best Concept Design At The Conceptual Design Stage For An Automotive Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Chooi Jing (2016) Tools For QRM Implementation In Job Shop Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Choon Pin (2016) Worker Health Monitoring System Based On SOCSO Standard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cui Fen (2016) Optimization Of Injection Molding Process On Name Tag Plastic Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Hok Hong (2016) Design Of Motion Detection Using Tri-Axial Accelerometer For The Elderly. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jin Tzen (2016) Analysis And Improvement Of Lubricant Blending Cycle-Time Inconsistency Using QC Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Jing Kang (2016) The Role Of Trademark For Commercial Exploitation For The Private Limited Company In Melaka And Johor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Juin Shyen (2016) Determinants Of Adoption Factors On Search Engine Advertising In Hotel Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kean Teik (2016) Solder paste printing yield improvement for SMT ultra fine pitch product by using six sigma technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Khai Yun (2016) Establishing Melaka Solar Valley Project For Renewable Energy Supply By Kumpulan Melaka Berhad. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kim Chuan and Hoo, Jian Ea and Lee, Yin Hui (2016) Wi-Fi Sniffer Based Commuters Statistics Collection System For Reliable Bus Scheduling System. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7883-7887. ISSN 1819-6608

Lim, Liyem (2016) Investigation Of Tool Wear When Machining AISI 1045 Using Uncoated Carbide Cutting Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Poh Siong (2016) A Financial Analysis To Identify Constraint Tools And Its Operational Impacts. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Reo Sei (2016) Development And Acoustical Analysis Using Kenaf And Coconut Fibres At Different Fibre Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Ru Pei (2016) Five-Axis Tool Path Programming Utilizing CATIA V5 For Turbine Blade : Aluminium 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Shu Yee (2016) Full-Service Restaurants : Effect Of Restaurant Quality Attributes On Consumer Behaviour Outcomes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Si Qing (2016) Design And Analysis Of Auto Security Door Locking System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Siau Li (2016) Implementation Of FPGA Based Smart Collision Avoidance Alert System Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Soon Yin (2016) Design And Development Of Electromagnetic Micro-Generator For Harvesting Energy From Vibration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Suzanne Shien Thung (2016) The Application Of TRIZ Reduce Speed Loss In Semiconductor Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Wanni (2016) Green Awareness On Generation Y Purchasing Behavior Towards Green Brand Products In Penang, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Yee Li (2016) Attention Monitoring And Enhancement By Neurofeedback Training. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Gordon Teck Poh (2016) Framework For Robotic Work Cell Configuration. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ling, Jia Xin (2016) Study The Properties Of MgAZ91D After The Gas Nitriding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Linggeswaran, Ganesen (2016) Quality improvement of phase noise in signal anayzer product : a case study in electronic industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lizawati, Salahuddin and Zuraini, Ismail and Wardah, Zainal Abidin (2016) A Systematic Literature Review On Safe Health Information Technology Use Behaviour. Jurnal Teknologi, 78 (4-3). pp. 1-7. ISSN 0127-9696

Loh, Chai Ling (2016) The Barrier Of Consumer's Decision-Making Toward Implementation Of Solar Photovoltaic Panel In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Kah How (2016) Improved GPS Single Point Positioning Using Weighted Least Square Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Kok Yong (2016) Design And Developmemt Of Under-Actuated Myo-Electric Prosthesis Hand Using Rapid Prototyping Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ser Lee and Chong, Shin Horng and Foo, Jia En and Hee, Wai Keat and Hasim, Norhaslinda (2016) Fast Positioning Performance In Ball Screw Mechanism With Disturbance Observer. Jurnal Teknologi, 78. pp. 71-78. ISSN E-ISSN2180-3722

Loh, Yew Fei (2016) Hand Sign Language Translator By Using Motion Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lok, Wing Hong (2016) Development Of Autonomous Robot For Flatness Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Long, Kah Chun (2016) The Factors Of Family Business In Perak And Selangor That Affect Company's Survival And Growth During Economy Downfall Period In 2015. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Louis, Shirley Lorita (2016) Sodium Alginate Concentration Derection Using Fiber Optic Component As Sensor Element. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Kai Zhong (2016) Sensitivity Study Of Front Suspension Properties Toward Vehicle Dynamic Characteristic Using Adams. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Li Chuin (2016) Design And Analysis Of Numbering System In Fibre To The Home (FTTH) System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Pei Sing and Ramlan, Roszaidi and Muhammad, N.S and Ghani, H. A. (2016) Comparison Of Harmonic Balance And Multiple Scale Method On Degree Of Nonlinearity For Duffing Oscillator. ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, 11 (8). pp. 5314-5319. ISSN 1819-6608

Ludan, Shamila Sandhu (2016) Solar Thermal Water Heater Requirements For Typical Malaysian House. Masters thesis, Universiti Teknikal Malaysia Melaka.

Luqman Nul Hakim, Juwara (2016) The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process. Masters thesis, Universiti Teknikal Malaysia Melaka.

M

M. Azhar, Ume Nur Ashikien (2016) Human Robot Interaction (HRI) For Kindergarten Children Using Humanoid Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M. Ridzuan, M. R. and Hassan, Elia Erwani and Abdullah, Abdul Rahim and Bahaman, Nazrulazhar and Abdul Kadir, Aida Fazliana (2016) A New Meta Heuristic Evolutionary Programming (NMEP) In Optimizing Economic Energy Dispatch. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 35-40. ISSN 2180-1843

M.Y, YUHAZRI and Goh, Nilson and Sihombing, Haeryip and Abd Manaf, Mohd Edeerozey (2016) Mechanical Properties and Failure Analysis of Laminated Glass Reinforced Composite with Various Gelcoat Thickness. Key Engineering Materials, 694. pp. 8-12. ISSN 1662-9795

Ma, Seet Ting (2016) EEG-Based Brain Computer Interface (BCI) For Smart Home Control Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maadis, Mohd Shahril (2016) Puyuh Farm Environment Control And Alert System Using Microcontroller And GSM Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahamood, Mazlin Aida (2016) Optimisation And Characterisation Of Functionalised Graphene Nanoplatelets Filled NR/EPDM Nanocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahanum, Mohd Zamberi and Farid Nasir, Ani (2016) Biodiesel Production From High FFA Rubber Seed Oil Using Waste Cockles. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7782-7787. ISSN 1819-6608

Mahanum, Mohd Zamberi and Farid Nasir, Ani and Mohd Fadzli, Abdollah (2016) Heterogeneous Transesterification Of Rubber Seed Oil Biodiesel Production. Jurnal Teknologi, 78 (6-10). pp. 105-110. ISSN 0127-9696

Mahat, Mohd Redzwan (2016) Study Of The Impact Routine Adjustment And Static Factor For Commercial Building. Project Report. UTeM, Melaka,Malaysia.

Mahfor, Muhammad Nurfaidhi (2016) Development A Liquid Sensor Using Fiber Optic For Engine Lubrication Oil And Optimization Using Design Of Experiment (D.O.E.) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmood, Maizurah (2016) Determining Service Quality Levels Of Government Employess : The Case Of Urban Transformation Centre (UTC) Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahmood, Noor Shakir (2016) Improve The Performance Of Electricity Power Production By Adopting ISO 50001 In The Iraqi Ministry Of. Masters thesis, Universiti Teknikal Malaysia Melaka.

Maisarah, Abu and Maizatun, Muhamad and Hasnizom, Hassan and Zahriladha, Zakaria and Siti Adlina, Md Ali (2016) Proximity Coupled Antenna With Star Geometry Pattern AMC Ground Plane. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8822-8828. ISSN 1819-6608

Makawi, Mustafa Mubarak (2016) Green Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Makbul Shah, Nurhidayah (2016) Design And Implementation Of Smart Observable System Of Indoor Hydroponic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Hafizuddin (2016) Development Of Automated Assembly Trainer With HMI/SCADA System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manap, Mustafa and Abdullah, Abdul Rahim and Saharuddin, Nur Zawani and Abidullah, Noor Athira and Ahmad, N.S. and Bahari, Norhazilina (2016) Voltage Source Inverter Switches Faults Analysis Using S-Transform. International Journal Of Electronics And Electrical Engineering, 4. pp. 157-161. ISSN 2301-380X

Mani, Nirmessini Maselah (2016) Application Of Kaizen To Prevent Slip Of Defective Products To Internal Customer In Automobile Manufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Manimaran, Lalitah (2016) The Effectiveness Of Web 2.0 To Enchance The Smes Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mansor, Nuratiqa Natrah (2016) Detection Of Anomaly Object By Using Humanoid Robot. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mansor, Nurul Hidayah (2016) Assessment On Islanding Mode Performance Towards Better Power Utilization In Smart Grid Using Powerworld Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mariam, Md Ghazaly and Teo, Ting Huan and Vivek, Regeev and Kartikesu, Vijayan and Chong, Shin Horng and Aliza, Che Amran and Zulkeflee, Abdullah and Mohd Amran, Md Ali (2016) Point-To-Point (PTP) Control Performances Of An Upper Limb Robotic Arm. Jurnal Teknologi, 78 (7). pp. 131-140. ISSN 0127-9696

Mariati, Sabah (2016) Implementation of Kanban Systems through Auto Scheduling tools at Die Bond process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Marimuthu, Sanmugam (2016) Contagious Communication : The Effectiveness Of Viral Marketing In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marizan, Sulaiman (2016) Study Of Voltage And Power Stability Margins Of Electrical Power System Using ANN. IET Digital Library / Conference, 1 (1). pp. 1-7. ISSN -

Marizan, Sulaiman and Hayfaa, Mohammed Hussein and Rosli, Omar and Zulhisyam, Salleh (2016) Dynamic Stability Analysis Of Generator With Power System Stabilizers Using Matlab Simulink. Indonesian Journal Of Electrical Engineering And Computer Science, 2 (3). pp. 501-509. ISSN 2502-4752

Marzuki, Firdaus (2016) Development Of Smart Flammable Gas Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mas Haslinda, Mohamad and Aduwati, Sali and Nur S., Ibrahim and Fazirulhisyam, Hashim and Rosdiadee, Nordin (2016) Temporal Evaluation Of Secondary User Interference To Primary User In Cognitive Radio Networks. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 565-570. ISSN 978-146739572-4

Mas'od, Siti Nor Rafidah (2016) Consumers' Attitude Towards Online Shopping : The Affecting Of Recommendation Agents. Masters thesis, Universiti Teknikal Malaysia Melaka.

Maslan, Mohammad Haidir (2016) Development Of Predictive Finite Element Models For Complete Contact Fretting Fatigue. PhD thesis, Universiti Teknikal Malaysia Melaka.

Masrullizam, Mat Ibrahim and Syafeeza, Ahmad Radzi and Soraghan, John (2016) Tracking The Eyes Using Interdependence Mean Shift Tracking Algorithm With Appropriate Information Provided. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7862-7865. ISSN 1819-6608

Mastor, Fatin Najwa (2016) Effect Of Inlet Velocity On Fluid Flow In T-Junction Pipe With Edge Fillet For Dividing Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura, Mohd Azlim and Kalthom, Husain and Burairah, Hussin and Zulisman, Maksom (2016) Designing Collaborative Learning Wizard To Assist Instructors In Utilizing Tools In LMS. 2015 IEEE Conference On e-Learning, e-Managernent And e-Services. pp. 81-85. ISSN 978-146739437-6

Mat, Lokman Hakim (2016) Improvement Of Tribological Properties Of Zinc Dialkyldithiophosphate (ZDDP) Induced Corn Oil Bio-Lubricant With The Addition Of Molybdenum Dialkyldithiophosphate (MoDTP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat, Shafizal (2016) Employee Motivation And Learning Behaviours In Selected Manufacturing Industries. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mat, Zawiah and Basir, Siti Arni and Jano, Zanariah (2016) Factors Affecting The Practice Of Islamic Professional Ethics : A Case Study Of A Public Sector. International Business Management, 10 (17). pp. 3860-3866. ISSN 1993-5250

Mat Hassan, Mohd Iqbal Hakim (2016) Dynamic Fatigue Analysis For Spot Welded Joint Based On Natural Frequency Due To Cycling Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hassan, Muhamad Hafis (2016) Study The Material Performance Of Aluminum-Zinc And Galvanized Iron For Roofing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Hussin, Syera Amira (2016) Study On Air Distribution Associated With Air Handling Unit : Duct System With Cooling Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Ibrahim, Masrullizam and Ahmad Radzi, Syafeeza and John, Soraghan (2016) Tracking The Eyes Using Interdependence Mean Shift Tracking Algorithm With Appropriate Information Provided. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7862-7865. ISSN 1819-6608

Mat Isa, Syaharil (2016) The Effect Of Moisture On AC Breakdown Voltage Of Synthetic Ester Oil Undegone Different Moisture Removal Methods. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Isa, Syaharil (2016) The Effect Of Moisture On AC Breakdown Voltage Of Synthetic Ester Oil Undegone Different Moisture Removal Methods. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mat Kassim, Nabilah and Abdullah, Abdul Rahim and Abdul Kadir, Aida Fazliana and Shamsudin, Nur Hazahsha (2016) Analysis Of Harmonic Source Identifier Using Periodogram. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5071-5077. ISSN 1819-6608

Mat Nawi, Nor Afifah (2016) Enhancement Of Traffic Collision Avoidance Using Token Bucket Algorithm. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Nor, Muhamad Asrul Affendi (2016) Fabrication Of Automatic Pump Down On Split Unit Wall Mounted Type Airconditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Radzi, Muhamad Ridzuan (2016) Development Of Building Application Noise Barrier Using Sandwich Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Tahir, Murni (2016) The Effectiveness Of Business Coaching To Entrepreneur. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Tahir, Noor Ayuma (2016) Tribological Performances For Palm Kernel Activated Carbon Epoxy Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite. Tribology International, 94. pp. 352-359. ISSN 0301-679X

Mat Yamin, Ahmad Kamal (2016) Tutorial 1: Finite Element Analysis of a Cruciform Braced Chassis Frame using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2016) Tutorial 1: Fluid Flow Through a Duct Bend using ANSYS Workbench. [Video] (Unpublished)

Mat Yamin, Ahmad Kamal (2016) Tutorial 2: Fluid Flow Through an Automotive Catalyst Monolith using ANSYS Workbench. [Video] (Unpublished)

Mat Zainu Zaman, Mohamad Rafiezi (2016) Significant Effect Of Different Base Metal Sheet Spot Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mat Zin, Nurul Halwanie (2016) Design A Manual Calf Massager For Prolonged Standing Worker By Using Ergonomic Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mathialagan, Elango (2016) Gas Auto Controller Box Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazda, Nur Syahirah (2016) The Effects Of Shaft Misalignment At Different Speed On Vibration And Sound Emission. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazelan, Muhammad Imran Kasimee (2016) Design And Development Of Piezoelectric Energy Harvester For Ultra Low Energy Electronics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maziati Akmal, M. H. and Mohd Warikh, Abd Rashid and Umar Al-Amani, Azlan and Mohd Asyadi Azam, Mohd Abid and Syahriza, Ismail (2016) Effect Of Amphoteric Dopant On The Dielectric And Structural Properties Of Yttrium Doped Potassium Sodium Niobate Thin Film. Materials Letters, 170. pp. 10-14. ISSN 0167-577X

Mazlan, Muhamad Hafeez Fikri (2016) Microstructural Characterization And Mechanical Properties Of Semisolid A356 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Muhammad Iqmal Qusyairie (2016) Efficiency And Cost Comparison Between The Utilization Of Condensed And Evaporated Refrigeration Accumulator And Battery As Backup System For Solar Air Conditioner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan, Mumtazahiqa (2016) Web-Based Automatic Monitoring And Scheduling Management Of Highland Plantation On Low Ground. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazlan , Khairunnisa (2016) Design The Sensor For Obstacle Avoidance For Underwater Application Using A Laser Distance Finders. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazli, Nursyahirah (2016) The Student Acceptance Toward Paperless Classroom To Enhance Green Education In The University. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazri, Norfattera Izzaty (2016) Factors Influencing Use Of Green Technology In Malacca City State. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali Shah, Muhamad Amirul Shah (2016) Development Of Hybrid Helix-Patch Antenna Transmission System For GPS-Guided Aerial Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ali Shifudin, Mohamad Hatim Arrazi (2016) Feasibility Of Coconut Grated In The Production Of Chipboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Dan, Rosidah (2016) Managing E-Waste For Environmental Sustainability: A Cases Study At Department Of Environment Malaysia (DOE) And Meriahtek Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Fahmi, Abd Samad (2016) Deterministic Mutation Algorithm As A Winner Over Forward Selection Procedure. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5114-5119. ISSN 1819-6608

Md Guzali , Mohamad Azli Zhafri (2016) Design A Dualband Rectifying Circuit For RF Power Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Hasan , Muhammad Roshidi (2016) Computer Network Product Quality Inspection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Isa, Azmi Awang and Othman, Muhammad Hakim and Manap, Zahariah and Mohamad Isa, Mohd Sa'ari and Mohd Zin, Mohd Shahril Izuan and Md Saat, Mohd Shakir and Zakaria, Zahriladha (2016) Improved Location And Positioning Utilizing Single MIMO Base Station In IMT-Advanced System. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (1). 75 - 82. ISSN 2289-8131

Md Jamal, Norezmi (2016) Self-Frequency Tracking High-Frequency Class E Resonant Inductive Links For Wireless Power Transfer Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Jelani, Muhammad Zailan (2016) The Investigation Of Thunder For Profiling The Type Of Lightning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Kurdi, Muhamad Anwar (2016) A Development Of Fibre Optic Sensor For Detecting Alcohol (Ethanol) Level In Perfume. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Leza, Fathin Nabilla (2016) Improving Complete Access To Data Within Collaborative Systems In Healthcare Domain. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Monir, Md Najmi (2016) Investigation On The Use Of Air Flow Indicator In Vehicle Air Conditioning Sensor As Dust Particle Accumulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Nasir, Muhammad Afiq (2016) Portable Artificial Nose To Detect Chicken Meat Spoilage Using Ammonia Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Razali, Juliana (2016) Automated Packaging Visual Inspector Using Template Matching Algorithm In Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Salleh, Rabiatul Adawiyah (2016) Fiber Optic Sensor For Sodium Chloride Concentration Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Suhaimi, Muhammad Allif Izzat (2016) Automatic Watering The Plant Without Human Interference. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusof, Nurzahirah (2016) IRIS Classification By Using An Improved Differential Box-Counting Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusoff, Alia (2016) Motivational Factors Toward Entrepreneurial Intentions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Yusoff, Nur Mimi Waheda (2016) Development Of Microsleep Detection System By Using Biosensor Module And Pulse Rate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Jani, Khairul Bariyah (2016) Development Of Smart Assist Device For Visual Impaired Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Liza, Rossyana (2016) Minimize Waste At Production Line By Implementation Lean Manufacturing Tools (Poka Yoke). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Nafiah, Mohd Rozaini (2016) Experimental Investigation Of Top Compression Piston Ring Morphology For Hydrogen Enrichment Diesel Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md. Yusop, Azdiana (2016) Sistem Penuaian Tenaga Hibrid Termoelektrik-Suria Menggunakan Pembentuk Masukkan Analisis Dinamik Songsang. PhD thesis, Universiti Teknikal Malaysia Melaka.

Megat Samsudin, Megat Muhamad Shafiq (2016) Street Lighting System Using Solar Powered Led Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Said, Maizatul Alice and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah and Mohd Salleh, Noor Hasyierah and Misran, Mohamad Harris (2016) Dual Band Rectifying Circuit For Rf Energy Scavenging. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3286 - 3290. ISSN 1819-6608

Mhd Ghazali, Nor Ashikin (2016) Development Human Movement Support Using Android Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mihat, Mohammad Fariq (2016) The Effectiveness Study On User Interface Design(UID) For Local Cosmetic Website By Apllying Theories Of Aesthetics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ming Hui, Tan and Shin Horng, Chong and Teng Fong, Tan and Ahmad Zaki, Shukor and Sakthivelu, Vasanthan and T.C., Ma and Mohamad Riduwan, Md Nawawi (2016) Tracking Control Of Vertical Pneumatic Artificial Muscle System Using Pid. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 129-132. ISSN 2180-1843

Minhad, Muhammad Suhaimi (2016) FPGA Based Implementation Of AES Encryption Algorithm Using Xilinx System Generator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Azrin (2016) Development Of Barcode Scanner Using Handphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Effendi and Sulaiman, Mohd Amri (2016) Simulation-based approach to Lean Manufacturing. Technical Report. Penerbit Universiti,UTeM.

Mohamad, Maziz (2016) Ultrasonic Based Distance Measurement System In Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Mohamad Roszulfadli (2016) Analysis Of Performance For Cart Gantry Crane System Using Scheduling Algorithm Via Controller Area Network (CAN). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Norizan (2016) Design Of Spring-Supported Diaphragm Capacitive MEMS Microphone. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Sabiq Safiuddin (2016) Reduction Of Harmonic Using Single Phase Shunt Active Filter Based On P-Q Theory Method For PWM Cascaded Multilevel Inverter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Sabiq Safiuddin (2016) Reduction Of Harmonic Using Single Phase Shunt Active Filter Based On P-Q Theory Method For PWM Cascaded Multilevel Inverter. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad, Siti Nurul Mahfuzah and Bakar, Norasiken (2016) Cara Mudah Belajar Photoshop. Percetakan Bumi Restu Sdn. Bhd., Johor Bahru. ISBN 9789834901714

Mohamad Ariffin, Mutalib and Zahriladha, Zakaria and Noor Azwan, Shairi and Sam, Weng Yik (2016) Design Of Microstrip Bandpass Filter With Electronically Tunable Notch Response. 26th Conference Radioelektronika 2016. pp. 454-457. ISSN 978-150901674-7

Mohamad Arshad, Nornabihah (2016) An Investigation Of Corrosion Of Dual Phase Steel Welded Plate In 5% Concentration Of Sodium Chloride. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Basir, Muhammad Sufyan Safwan and Abdullah, Abdul Rahim and Ranom, Rahifa and Kasim, Rizanaliah and Selamat, Nur Asmiza and Shamsudin, Nur Hazahsha (2016) Experimental Verification Of Nickel-Metal Hydride Battery Parameters Estimation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 47-52. ISSN 2180-1843

Mohamad Firdaus , Abu (2016) Renewable Energy Powered And Monitoring For Urban Kit System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Hafiz, Harun and Mohd Razali, Md Yunos and Mohamad Zaharudin, Sariman and Fauzi, Ahmad and Khisbullah, Hudha and Rosli, Abu Bakar (2016) Semi-Active Secondary Suspension Control Using Fuzzy Skyhook For Improving Railway Vehicle Dynamics Performance In Lateral Direction. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2454-2461. ISSN 1819-6608

Mohamad Hafize, Ramli and Mohamad Zainol Abidin, Abd Aziz and Mohd Azlishah, Othman and Abdul Halim, Dahalan (2016) Design Multiband Planar Printed Monopole Antenna With Minkowski And Lollipop Defected Parasitic Structure (DPS) For Wireless Communication System. 26th Conference Radioelektronika 2016. pp. 475-480. ISSN 978-150901674-7

Mohamad Hafize, Ramli and Mohamad Zoinol Abidin, Abd Aziz and Mohd Azlishah, Othman and Nornikman, Hassan and Muhammad Syafiq, Noor Azizi and Siti Nurfarhanah, Azizul Azlan and Abdul Halim, Dahalan and Hamzah Asyrani, Sulaiman (2016) Design Of Sierpinski Gasket Fractal Antenna With Slits For Multiband Application. Jurnal Teknologi, 78 (5-8). pp. 123-128. ISSN 0127-9696

Mohamad Haniff , Harun and Khalil Azha, Mohd Annuar and Mohd Firdaus, Mohd Ab Halim and Mohd Hanif, Che Hasan and Mohd Shahrieel, Mohd Aras and Muhamad Faizal, Yaakub (2016) Peltier And Seebeck Efficacy Of Hot And Cold Air System For Portable O-Ref (Oven & Refrigerator) Application. Proceedings of Mechanical Engineering Research Day 2016. pp. 81-82. ISSN 9789670257709

Mohamad Hashim, Ummi Kalsom and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Sakidin, Hamzah and Balakrishnan, Subatira and Mohamad Isa, Mohd Sa'ari (2016) Change Detection From Landsat-5 TM Satellite Data. ARPN Journal Of Engineering And Applied Sciences, 11 (17). pp. 10234-10238. ISSN 1819-6608

Mohamad Muzammir, Rosli (2016) Optimizing the changeover of packaging machine by implementing single minute exchange of dies in textile manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Noor, Mohamad Shah Nizam (2016) Tribology Studies Of Bio-Lubricant On Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Radzi, Muhammad Faiz (2016) Reduce Car Cabin Temperature Using Reversed Automotive Blower Motor Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Razali, Azziddin and Rahman, ,Mahmudur Azizur and A. Rahim , Nasrudin (2016) Real-Time Implementation Of D-Q Control For Grid Connected Three Phase Voltage Source Converter. ASDDD, 4. p. 11. ISSN 1553-572X

Mohamad Roba'ie, Azrol Ashraf (2016) Smart Battery Monitoring System Using Arduino UNO (SBMS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Roba'ie, Azrol Ashraf (2016) Smart Battery Monitoring System Using Arduino UNO (SBMS). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Mohamad Rom, Tamjis and Zikri Abadi, Baharudin and Mat Hanafiah, Mohd Ariff and Ahmad Idil, Abdul Rahman and Maslan, Zainon and Ahmad Aizan, Zulkefle and Mazree, Ibrahim and Syed Najib, Syed Salim and Imran, Mohd Ibrahim and Mohd Ruddin, Ab Ghani and Raja Roslan, Raja Abd Rahman and Ismail, Abu Shah and P. N. S. A. B., Rahman and S. N. M., Shahril and Dawood S., Ahmeed and A., Syafiq and W. A., Wan Adnan (2016) Permeance Based Algorithm For Computation Of Flux Linkage Characteristics Of Non-Linear 6/4 Switched Reluctance Motor (SRM). ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8897-8901. ISSN 1819-6608

Mohamad Rozi, Mohamad Najmi (2016) Study Of Coefficient Of Friction Of Pure Bio-Lubricants Based On Banana Peel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Salleh, Mohamad Fazli (2016) Study And Analysis Of Power Attenuation Due To Optical Bend Loss In OPGW Overhead Transmission In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Sattar, Syarizal Azim (2016) Design And Finite Element Analysis Of Ergonomics Prosthetic Leg. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shokri, Ahmad Sayuthi (2016) Pembangunan Analisis Gerakan Mata Secara Automatik Bagi Sistem ROBII TX 300. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Yatim, Norazlina (2016) Functionalized Multiwall Carbon Nanotubes For Efficiency Enhancement Used Of Nitrogenous Fertilizer In Paddy. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohamed, N. J. and Sahib, Shahrin and Suryana, Nanna and Hussin, Burairah (2016) Understanding Network Congestion Effects On Performance: Article Review. Journal Of Theoretical And Applied Information Technology, 92 (2). pp. 311-321. ISSN 1992-8645

Mohamed, Hammami (2016) IOT Home Automation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Hazim (2016) Preliminary Investigation Of Visual Features For AGV Localization Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Nurul Amira (2016) Controlling Vacuum Technology By Using Android And Bluetooth Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Siti Nur Syaeerah (2016) The Factors Of Practising Green Packaging Adoption Among Food Industry Around Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed, Suhana and Sham, Rohana and Jaffar, Haliza Hirza and Latif, Ruziah A and Zaharum, Zaibedah and Zainal Abidin, Rabiatul Alawiyah and Mohd Hasan Abdullah, Norhasniza and Ahmad, Zuraidah and Md Don, Mohd Ali and Hassan, Sallaudin and Wan Mohamad, Wan Munirah and Raja Mohd Rasi, Raja Zuraidah and Omar, Nooririnah (2016) The Acceptance of Ar-Rahnu Scheme Among Rural Population. In: Regional Conference On Science, Technology And Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 1-11. ISBN 9789811014567

Mohamed Al-Sideque, Zainuddin (2016) Aerodynamic performance comparison of various hatchback rear spoiler configurations using CFD analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamed Amin Tawakkal, Nursyafiqah (2016) Application Of Ergonomics Principles For Workplace Arrangement Of Bicycles Workshop. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Aminuddin, Mai Mariam and Balasubramaniam, Manimekalai (2016) Effect Of Electrode Size On Salinity-Voltage Correlation. MALTESAS Multi-Disciplinary Research Journal (MIRJO), 1 (1). pp. 9-13. ISSN 0127-6271

Mohamed Hairi, Mohamed Azelan (2016) Mircostructural Morphology And Mechanical Properties Of Rheocast A319 Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Kassim, Anuar and Yasuno, Takashi and Suzuki, Hiroshi and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2016) The Improvement And Evaluation Of Electronic Spectacle Device Based On Obstacle Detection System For Visually Impaired Person. IEEE JAPAN, 1 (-). pp. 1246-1251. ISSN 1246-1252

Mohamed Kassim, Anuar and Yasuno, Takashi and Suzuki, Hiroshi and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2016) Indoor Navigation System Based On Passive RFID Transponder With Digital Compass For Visually Impaired People. (IJACSA) INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS, 7 (2). pp. 604-611. ISSN 2156-5570

Mohammad, Khairuddin (2016) E-Sajadah. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Muhammad Azrain (2016) An Investigation On Corrosion Of Low Carbon Steel Welded Plate In Sodium Chloride Solution. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad, Muhammad Nur Azizi (2016) Development Of A Framework For Remanufacturing Of LCD Monitor At The Disposal Stage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad, Raed Ali (2016) The Biomechanical Effect Of Human Weight On Spinal Facet Joints Using Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad, Sabarariah (2016) Verification Of Vipcoda Software By Using Standard Design Procedure. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohammad Fauzi, Intan Nurhazirah (2016) Development Of Arduino Based Alert System For Heat, Flame Detector And Gas Leakage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Fuad, Nazif (2016) Effect Of Engine Control Unit (ECU) On Engine Performance For Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hilmi, Mohammad Hami Hamizan (2016) Development Of Flood Warning System To Residents Based On Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Kamal, Sarah Nadirah (2016) The Economic Stability, Productivity And Sustainability Toward Malaysia Food Industry Due To The Oil Fuel Price Upsurge. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Othman, Morad Yousef (2016) Cloud Computing Adoption Model For Higher Education : A Comparison Study Between Malaysia And Jordan. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad Sabri, Muhammad Haziq (2016) Car Counting Using Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Sukery, Nur Munirah (2016) Preliminary Study On The Capability Using Lube Oil Base On Local Virgin Coconut Oil For Transmission Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Taha, Mastura and Salit @ Sinon, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application Of Hybrid Sugar Palm-Filled Polyurethane Application Of Hybrid Sugar Palm-Filled Polyurethane Composites In Conceptual Design Of An Automotive Anti Roll Bar. Journal of Engineering and Technology (JET), 7 (1). pp. 102-113. ISSN 2180-3811

Mohammad Zaidi, Fatin Syazwani (2016) Design And Development Of An Antenna At 900MHz For Short Range Wireless Communications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammed, Marwan Qaid Abdulrazzaq (2016) Walking Motion Trajectory Generation Of Hip Powered Orthotic Device. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohammed, Rasheed and Rosli, Omar and Afiqah, Sabari and Marizan, Sulaiman (2016) Validation Of A Three-Phase Cascaded Multilevel Inverter Based On Newton Raphson (N.R.). Indian Journal Of Science And Technology (INDJST), 9 (20). pp. 1-13. ISSN 0974-6846

Mohammed, Rasheed and Rosli, Omar and Marizan, Sulaiman (2016) Design And Development Multilevel Inverterwith Different Modulation Index (MI) Based On Super Capacitor (SC) For Harmonic Reduction. World Applied Sciences Journal (WASJ), 34 (6). pp. 760-769. ISSN 1818-4952

Mohan, Ahmed Esmael (2016) Laboratory-Scale And Real Experimental Study On The Performance Of Energy Regenerative Suspension System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd, Najwa Norhanani (2016) Planar Antenna Design For Short Range Device (SRD) Of Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Azahar, Arman Hadi and Ab Hadi, Nik Azran (2016) Photovoltaic Economic Potential For Investment Portfolio In South East Asia. ARPN Journal Of Engineering And Applied Sciences, 11 (19). pp. 11260-11265. ISSN 1819-6608

Mohd Abdah, Ahmad Taqiyuddin (2016) Design And Development Of Wireless Switching Control (WSC) Using Smartphone. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ahadlin, Mohd Ahassolehin (2016) Characterization Of Used-Engine Oil Enhance By Using Zirconia Nano-Particles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Mohd Sobran, Nur Maisarah and Bahar, Mohd Bazli and Oh, Kok Ken and Mat Ibrahim, Masrullizam and Johan, Nurul Fatiha (2016) Detection Of Multiple Mangoes Using Histogram Of Oriented Gradient Technique In Aerial Monitoring. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2730-2736. ISSN 1819-6608

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Wong, Gao Jie and Bahar, Mohd Bazli and Sulaiman , Marizan and Mat Ibrahim, Masrullizam and Zainal Abidin, Amar Faiz (2016) Quality Checking And Inspection Based On Machine Vision Technique To Determine Tolerance Value Using Single Ceramic Cup. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2737-2742. ISSN 1819-6608

Mohd Ali, Nursabillilah and Soon, Wei Jun and Karis, Mohd Safirin and Md Ghazaly, Mariam and Mohd Aras, Mohd Shahrieel (2016) Object Classification And Recognition Using Bag-Of-Words (BOW) Model. 2016 IEEE 12th International Colloquium on Signal Processing & its Applications (CSPA2016), 4 - 6 March 2016, Melaka, Malaysia, 1 (-). pp. 216-220. ISSN -

Mohd Ali, Nurul Ain (2016) Development Of Support Instrument For Petanque. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amin, Ahmad Nawawi (2016) Design And Analysis Effect Of Front Area Of Land Rover Defender On Aerodynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amman, Rosmia and Halim, Mohd Faizal and Dhar malingam, Sivakumar and Abu Shah, Ismail (2016) Influences Of Thickness And Geometrical Change From Draw Forming In Quasi-Static Axial Compression Simulation. International Review on Modelling & Simulations, 9 (6). pp. 442-449. ISSN 1974-9821

Mohd Annuar, Khalil Azha and Md Zin, Muhammad Haikal and Harun, Mohamad Haniff and Mohd Ab Halim, Mohd Firdaus and Azahar, Arman Hadi (2016) Design and Development of Search and Rescue Robot. International Journal of Mechanical & Mechatronics Engineering . pp. 36-41. ISSN 2077-124X (online) 2227-2771 (Print)

Mohd Aras, Mohd Shahrieel (2016) Introducing A New Research Group - Underwater Technology Research Group (UTERG). BULETIN RICE@UTEM (EDISI KEDUA), 2 (-). p. 21. ISSN -

Mohd Arshad, Noorazian (2016) A Study On Relationship Between Hand Pressure Grip Force With Hand Tool Vibration At Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Arshad, Nor Amirah (2016) Order Pattern Prediction Using Artificial Intelligence In An Inventory System Design. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Asri, Siti Nur Izyan (2016) Solar Powered LED Decorating Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asyraf, Rawi (2016) Investigation of indoor air quality for enclosed space application using electric-powered mini excavator. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Azali, Noor Syahida (2016) The Impact Of Different Octane Numbers On Performance And Emission Gasses On The Naturally Aspirated Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azezs, Nurhazirah (2016) A Study On The Technology Transfer Barriers Of Malaysian Composite Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azha, Nur Shamira (2016) Notable Liquid Sensor Development Using Fiber Optic Sensor Applications For Brake Oil Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli, Salim and Azma, Putra and Muhd Ridzuan, Mansor and Musthafah, Mohd Tahir and Mohd Zaid, Akop and Mohd Azman, Abdullah (2016) Analysis Of Parameters Assessment On Laminated Rubber-Metal Spring For Structural Vibration. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-12. ISSN 1757-8981

Mohd Azlim, Mastura (2016) A Framework On Collaborative Learning Activities To Actively Engage Students In Learning Management System. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Azman, Mohamad Huzaifa (2016) A Study Of Cobalt Catalyst Preparation For Carbon Nanotube Powder Growth By Using Alcohol Catalytic Chemical Vapor Deposition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ruslan, Eliyana and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2016) Circular Microfluidic Substrate Integrated Waveguide Resonator Sensor For Materials Characterization. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3217 - 3221. ISSN 1819-6608

Mohd Erdi, Ayob and Jumadi, Abdul Sukor and Mohd Zarar, Mohd Jenu (2016) An Overview On The Measurement Uncertainty Evaluation Of Electromagnetic Compatibility Test. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7214-7216. ISSN 1819-6608

Mohd Fadzil, Muhamad Shafarin (2016) Incorporating Flywheel Hybrid Module In Automobile : An Embodiment Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli, Abdollah and Mohd Azli , Salim and Tee, Boon Tuan (2016) Proceeding Of Mechanical Engineering Research Day 2016 (MERD’16). In: https://books.google.com.my/books?id=YZfACwAAQBAJ, 31 March 2016, Kampus Teknologi, Universiti Teknikal Malaysia Melaka (UTeM).

Mohd Fahmi, Taher and Mohammad Haniff, Harun and Khalil Azha , Mohd Annuar and Mohd Firdaus , Mohd Ab Halim and Mohd Shahrieel, Mohd Aras and Arman Hadi, Azahar and A.F.Z, Abidin (2016) Development Of Autonomous Sweeper Robot For Badminton Court. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 129-133. ISSN 2180-1843

Mohd Fazi, Muhammad Zuhdi (2016) Development Of An Automated Helmet Washer Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Samsudin (2016) Experimental study of sheer strength of sheet metals. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Fuad, Mohammad Nur Taufiq (2016) Investigation Of Wear Mechanism On The Ball Bearing Tested By Nano-Oil Using Extreme Pressure Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz, Jali and Ahmad Izzuddin, Tarmizi and Zul Hasrizal, Bohari and Hazriq Izzuan, Jaafar and Mohamad Na'im, Mohd Nasir (2016) Pattern Recognition Of EMG Signal During Load Lifting Using Artificial Neural Network (ANN). 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 172-177. ISSN 978-147998252-3

Mohd Hafiz, Sulaiman and Sani Irwan, Md Salim and Masrullizam, Mat Ibrahim (2016) Implementation On UTeMRISC Microcontroller With Embedded Fault-Tolerance. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6339-6343. ISSN 1819-6608

Mohd Hajazi, Aini Syahida (2016) Investigation Of Drilling Process Using Nanofluid. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hashim, Mohamad Fitri (2016) Design A Maintenance Schedule Using Reliability Evaluation For Rolling Machine At Power Booster Engineering & Maintenance Sdn. Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hashim, Mohamad Hasnor (2016) Generate Current From Waste Heat Called Seebeck Generator Using Peltier Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hashim, Muhammad Hafiz (2016) Smart Anti-Theft Surveillance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hassan, Muhamad Zarif (2016) Power Management In Wind Diesel Hybrid System With Battery Energy Storage. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hisham, Nordin and Kalaiselvan , Selvaraju and M., Fathullah (2016) Increasing ABB FlexPicker Robot’s Degree Of Freedom (DOF) Using Flexible End Effector. MATEC Web Of Conferences, 78 (01056). pp. 1-8. ISSN 2261-236X

Mohd Hizali, Muhamad Hilmi (2016) Flood Disaster Indicator Of Water Level Monitoring By Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Husin, Mohd Haizal (2016) Study On Copper Incorporated Mesoporous Silica SBA-15 For N2O Catalytic Decomposition. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ibrahim, Imran (2016) Open Air Gap Cavity Radial Line Slot Array Antenna For Wireless Backhaul Application. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ibrahim, Imran and Abd Rahman, Tharek and Zakaria, Zahriladha (2016) 26 Ghz Open Ended Air Gap Cavity Rlsa Antenna For Next Generation Broadband Wireless Access. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (4). 21 - 24. ISSN 2289-8131

Mohd Jailani, Muhammad Aiman Afiq (2016) The Optimization Of Pressure Different Rear Suction Airflow Correction Device Based On The Ratio Inlet Over Outlet In Motivation Of Aerodynamic Drag Reduction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jamil, Nur Nadiah (2016) Summons System Using RF (Radio Frequency) And Arduino System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Jofrainee, Mohd Fakrul Nizam (2016) Lightweight Reflexology Block From Empty Fruit Bunches Of Palm Oil Wastes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Johari, Ahmad Syahir 'Izzat (2016) Reka Bentuk Dan Pembangunan Alat Pengasah Pisau. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kasim, Mohd Fazli (2016) System Liquid-Cooled Panel Air Conditioners Use Water As A Coolant Applying The Peltier Effect. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Kassim, Mohammad Khairul Azmi (2016) Influence Of Air Speed And Spray Pressure On Urea Granule Physical Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khaidzir, Nurzaikhanazira (2016) Learn By Demonstration Control Algorithm For Cleaning Robot. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohd Khairul, Syawal Fikri (2016) Fruit Size And Color Maturity Identification Using Raspberry Pi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairy, Ismail and Azmi, Awang Md Isa and Mohd Nor, Husain and Muhammad Syahrir, Johal and Mohd Riduan, Ahmad (2016) Design And Development Of Modified-Proportional Fair Scheduler For LTE/LTE-Advanced. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3280-3285. ISSN 1819-6608

Mohd Khalid, Nur Raudhah Salsabila (2016) Assessment On The Impact Of Metal Oxide Varistor-Arrester For Series Compensation On High Voltage Transmission Line Using PSCAD Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Latif Marekan, Ainur Munira (2016) Transducer Energy Based On Electric Fan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Lizan, Md Din (2016) Gloves holes defect evaluation by using electronic air leak testing machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Maliki, Mohd Adli Arif (2016) Study To Optimise Interior Field Flow Of A Lobe Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Manshur, Aminuddin (2016) Design Of Automated Guided Vehicle Using Programmable Logic Controller. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohd Mokhtar, Nur Salma (2016) Design Of Ankle Rehabilitation System And Control Using Android Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Narizee, Mohd Nasir and Laurent, Mezeix and Yulfian, Aminanda and M. A., Seman and Ahmad, Rivai and K. M., Ali (2016) Spring-Back Simulation Of Unidirectional Carbon/Epoxy L-Shaped Laminate Composites Manufactured Through Autoclave Processing. IOP Conference Series: Materials Science And Engineering, 114. pp. 1-11. ISSN 1757-8981

Mohd Nasir, Faarih Farhan (2016) Development Of Compressed Air Powered Bicycle (CAPB) Using Linear Actuator (Pneumatic Cylinder). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Muhamad Azidi (2016) The Development Of Directional Control And Wheel Synchronization Od Vehicle Steering By Wire (VSBW) System By Implementing Fuzzy PID Controller (FPC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasir, Nazrin Hazim (2016) An Experiment Studies On Partition's Effect In Selected Terrace House Using Computational Fluid Dynamics (CFD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasrin, Mohd Nashrul Ashraf (2016) Study On The Effect Of Different Tire Model On Speed Characteristics Of A Vehicle Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasroldin, Nur Husna (2016) Influence Of Biodiesel Blending On Physical And Chemical Properties And Empirical Equation For Predicting The Properties Of Biodiesel Blend. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nawawi, Nurul Husna (2016) Optimisation Of Cutter Geometrical Feature For Machining Orthopedic, Trauma And Spinal Biomaterials Implant. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nawi, Al Alif Elmi (2016) Optimization On The Nanoparticle Suspension For Better Dispersion In Liquid Phase. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazmi, Farhana (2016) Teaching - Learning Style Attributes That Influence The Learning Outcome In Entrepreneurship Education (EE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nizam, Sudin and Shamsul Anuar, Shamsudin and Mohd Azman, Abdullah (2016) Effect Of Part Features On Dimensional Accuracy Of FDM Model. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8067-8072. ISSN 1819-6608

Mohd Noh, Mohd Zakaria (2016) GMAW Parameters Effects On Microstructural And Mechanical Properties Of TOW SS304 And BS1387. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Noh, Muhammad Zulhilmi (2016) Impact Of Grid-Connected To PV System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Noor, Nor Shahirah (2016) Computer Aided Diagnosis For Stroke Patients Based On Difussion-Weighted Magnetic Resonance Images. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Azam, Uzair (2016) Development Of Measuring Device With Memory Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nurji, Mohammad Faaiz (2016) Geofencing Based Auto Silent Mode Application For Android. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Radzi, Azalan (2016) Commercializing Tool For Technology Based Product : A Case Study Of USM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Radzi, Nor Ain (2016) Exploring Factors That Influence Residents' Intention Towards Separation Of Solid Waste At Source In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rafie, Nur Afifah Faizah (2016) Investigation Of Performance Of Parameter Estimation Method In System Identification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Mohammad Taqiyuddin (2016) System Response For Lightweight Robot Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Mujahid (2016) The Intelligent Control Lawn Mower Technology For Modern Accommodation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Raziff, Muhammad Shahmir (2016) Designing A Friendly Campus "Learning Environment" Model For FKP Students Using Product Service System Concept. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Riduan, Ahmad and Mona Riza, Mohd Esa (2016) The Estimation Of Power Flux Of Microwave Radiation From A Negative Narrow Bipolar Pulse A Low Earth Orbit Satellite Altitude. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 115-119. ISSN 2180-1843

Mohd Rosli, Mohd Afzanizam (2016) Pembangunan Dan Kajian Prestasi Lapangan Pengumpul Polimer Dan Fotovoltan Terma (PVT) Polimer Di Malaysia. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rosli, Nur Iffat (2016) The Relationship Between Employees' Safety And Health On Potential Hazard With Reduce Accident At Workplace : A Case Study In Syntronixs Asia Sdn Bhd Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sa'at, Fatimah Al-Zahrah and Cho, Weiyang (2016) Oscillatory Flow Across Plates With Different Shape Of Edges. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 8. pp. 77-91. ISSN 2180-1053

Mohd Sabri, Nur Fatin (2016) Electrical Characteristics Of High-K Dielectrics For The 19NM Gate Length NMOS Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sabri , Nor Amalina (2016) High Rise Building Evacuation Route Model Using DIJKSTRA'S Algorithm. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Safeai, Nur Maizatul Nadia (2016) Degradation Of Tensile Properties Of Natural Rubber (NR) Composite And Tapioca Starch (TS) Under Soil Burial Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saiful , Md Sukardi (2016) Active front steering for passenger vehicle using fuzzy PID method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Saleh, Afferry (2016) Development Of New Magnetic Clamping For Lathe Machine (Model GH-1440-3). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salim, Muhammad Ammar Luqman (2016) Accuracy And Repeatability Analysis Of Industrial Robot Under Loaded Conditions And Various Distances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salleh, Nurhashikin and Selamat, Siti Rahayu and Saaya, Zurina and Ahmad, Rabiah and Mas'ud, Mohd Zaki (2016) Identifying Cyber Violent Extremism (CYBER-VE) Components By Exploring Dark Web. International Journal of Computer Science and Information Security, 14 (9). pp. 52-61. ISSN 1947-5500

Mohd Salleh, Shazatul Athirah (2016) Development Of Anti-Theft Car Security Using SMS System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Salmi, Munirah (2016) Water Level Tank Using Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Mohd Sani, Erni Natasya (2016) Evaluation Of Risk Factor In Manual Load Carrying. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sani, Muhammad Syahir (2016) The Adoption Of Geographical Information System (GIS) To Ease The Customer In Locating SME Business Premises Along Jalan Hang Tuah Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahadan, Mohd Suan and Mohd Rafie, Johan (2016) Synthesis Of Y1-xAlxBa2Cu3O7-δ Via Combustion Route: Effects Of Al2O3 Nanoparticles On Superconducting Properties. Physica B: Condensed Matter. pp. 1-18. ISSN 0921-4526

Mohd Shaharuddin, Muhamad Zulhaziq (2016) Wireless Security For Bike Ignition Using Android Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahfizal, Ruslan and Kamal, Othman and Jaharah, A.Ghani and Mohd Shahir, Kasim and Che Hassan, Che Haron (2016) Surface Roughness Of Magnesium Alloy AZ91D In High Speed Milling. Jurnal Teknologi, 78 (6-9). pp. 115-119. ISSN 0127-9696

Mohd Shahrieel, Mohd Aras and Mohd Khairi, Mohd Zambri and Fadilah, Abdul Azis and Shahrum Shah, Abdullah and Anuar, Mohamed Kassim (2016) Design And Development Of Underwater Robot For Cleaning Process. Journal of Advanced Manufacturing Technology (JAMT), 10 (1). pp. 1-12. ISSN 1985-3157

Mohd Shahrieel, Mohd Aras and Muhammad Nizam, Kamarudin and Muhammad Hanif, Che Rusli and Muhammad Iktisyam, Mohd Zainal (2016) Small Scale Unmanned Underwater Remotely Operated Crawler (ROC). TELKOMNIKA Indonesian Journal of Electrical Engineering, 3 (3). pp. 1-8. ISSN 2302-4046

Mohd Shahrieel, Mohd Aras and Shahrum Shah, Abdullah and Siti Yasmin, Othman and Marizan, Sulaiman and Mohd Farriz, Md Basar and Mohd Khairi, Mohd Zambri and Muhammad Nizam, Kamarudin (2016) Fuzzy Logic Controller For Depth Control Of Underwater Remotely Operated Vehicle. Journal Of Theoretical And Applied Information Technology, 91 (2). pp. 275-288. ISSN 1992-8645

Mohd Shakir, Md Saat and Ong, Zhen Guat and Farah Khalidah, Abdul Rahman and Azmi, Awang Md Isa and Abdul Majid, Darsono (2016) Development Of Wireless Power Transfer Using Capacitive Method For Mouse Charging Application. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 460-471. ISSN 2088-8694

Mohd Syafiq, Zainal (2016) Molding temperature control enhancement for transfer molding process via additional wire heater. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Tah, Mohd Alif (2016) Detection Of Dielectric Material Using Miniature Two-Plate Electrical Capacitance Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tahir, Mohd Hirzarul Hafiz (2016) Improvement Of Mold Ability And Wire Sweep In Semiconductor Devices Using DOE Statistical Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Tajwi, Nurul Akmar (2016) Design And Development Of Cylinder LPG Trolley For Domestic Use. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tohid, Mohd Shahirul Aizad (2016) Factory 1 Mapping Using Android For FTK Community. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yaacob, Noorayisahbe (2016) A Framework For Accessing Patient Health Records Using Information Communication Technology Devices. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yaacob, Nurafiza Suraya (2016) Modelling And Forecasting The Bandwidth Consumptions In Technology Campus Of UTeM By Using A Statistical Method (ARIMA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yasin, Azni (2016) Modeling Software To Determine Rating Of Circuit Breaker In Design Electrical Installation For Domestic Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yassin, Muhammad Arief (2016) A Study On The Challenges Of New Technology Adoption By Composite Industries In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yatim, Maria De Valda (2016) Enterprise Resources Planning : A Case Study In Automotive Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yosop, Mohd Alif (2016) Implementation Of Future Walking Kit For Disable Person With Security System By Using Arduino And Global System Of Mobile (GSM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yunos, Ahmad Syafiq (2016) A Proposal Of OEE Simulation Decision Support Tools For Lean Practitioners. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yunus, Siti Rodhiah (2016) Quality Of Service (QOS) Improvement Using Traffic Shaping In ADTEC Batu Pahat. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yunus, Siti Syahirah (2016) Investigation On Thermal Conductivity Functionalized Multiwalled Carbon Nanotubes Based Nanofluids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusof, Nur Yusma Amira (2016) Smart Waste Bin With Real Time Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Muhammad Hilmi (2016) Smart Bicycle Safety System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Muhammad Shafiq (2016) Determinant That Affect Technology Adoption In Agriculture In Kelantan State. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yusoff, Nor Azizah (2016) Design And Analysis Of Three-To-Five-Phase Transformer For Multiphase Load. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Yusoh, Muhamad Luqmanul Hakim (2016) Development Of Graphical User Interface (GUI) For Smart Waste Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaid, Faizzati (2016) Hand Signal Detection Using Camera. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Mohamad Zuhailmie (2016) Effects Of Branch Pipe Diameter Ratio On Fluid Flow In Y-Junction Pipe For Combining Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki, Mas'ud and Shahrin, Sahib and Mohd Faizal, Abdollah and Siti Rahayu, Selamat and Robiah, Yusof (2016) An Evaluation Of N-gram System Call Sequence In Mobile Malware Detection. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3122-3126. ISSN 1819-6608

Mohd Zalani, Naziatul Fazilah and Dharmalingam, Sivakumar and Selamat, Mohd Zulkefli (2016) Tensile Properties Of Woven Kenaf Fiber Reinforced Polypropylene Hybrid Aluminium-Composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608

Mohd Zambre, Mohammad Nurul Safwan (2016) Development Of Holding Jig For Cutting Of Polymer Foam Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zambri, Mohd Khairi and Mohd Aras, Mohd Shahrieel and Khamis, Alias and Hairi, Mohd Hendra (2016) Investigating The Impact Of Photovoltaic Connection To The Malaysian Distribution System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 23-28. ISSN 2180-1843

Mohd Zin, Ameir Asyraff (2016) Investigation Of Mechanical Properties Of Plastic Product For Two Plate Family Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zubir, Amir and Md Fahmi, Abd Samad (2016) Hardware-In-The-Loop Simulation Of Steer-By-Wire System In Automotive Vehicle. International Journal Of Advanced And Applied Sciences, 3 (9). pp. 51-58. ISSN 2313-626X

Mohd. Noor, Helmi Adly (2016) Serious Games Model In Diagnosing Visual Perception Problem For Autistic Students. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohtar, Nursharina (2016) Optimization Of Drilling Parameters On Diameter Accuracy In Wet Drilling Process Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mok, Juan Chien (2016) Study On The Effect Of Holes Arrangement Of Absorptive Silencer On The Sound Transmission Loss Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokhtar, Siti Mastura Ainaa (2016) Development Of Smart Under And Over Voltage Protection System For Domestic Application Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mokhtaza, Aliff Amirudin (2016) Addition Of Molybdenumdialkyl Dithiophosphate (MoDTP) Into Zinc Diamyldithiocarbamate (ZDDC) Induced Canola Oil Bio-Lubricants As Tribological Properties Improver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Moktar, Nur Nabila (2016) Integrated Antenna With Notch Filter For Multifunction Operation In Wireless Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mosheer, Ahmed Daud (2016) Optimal Solar Cable Selection For Grid-Connected Photovoltaic Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Motea , Zakarya Mohammed Nasser Saleh (2016) Development Of Vision-Based Anomaly Detection System In A Dynamic Environment Using Background Subtraction. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Muda, Ayuni Fateeha (2016) Brain Lesion Segmentation And Classification Using Diffusion-Weighted Imaging (DWI). Masters thesis, Universiti Teknikal Malaysia Melaka.

Muda, Azah Kamilah and Syed Ahmad, Syarifah Sakinah and Muda, Noor Azilah and Mohd Yusoh, Zeratul lzzah and Darus, Maslina (2016) Enhance Rotation Invariant Through Moment-Based Function For A Better Representation Of 3D Object Shape Descriptor. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhalith, Muhammad Amir Fuad (2016) Optimization Of Rear Suspension Dynamic Performance By Using Virtual Formula. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad, Mohd Muskhairil Amin (2016) Enhance Learning Using Instructional Video In Indices And Logarithms. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhamad Haffiz, Mohd Radzi and Kok, Swee Leong (2016) Fabrication Of BaTiO3 Thick-Film Lead-Free Piezoelectric Ceramic By Using Screen Printing Method. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8787-8793. ISSN 1819-6608

Muhamad Izwan , Mohd Yahya (2016) Study Of Thermal Stress Effect On Ester Oil Using Breakdown And Fourier Transform Infrared Spectroscopy (FTIR) Test. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhamad Nor, Nor Amalina (2016) Effect Of Agitation Rate And Reaction Temperature On The Size Of Linseed Oil Microcapsule Self-Healing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Shahirul, Mat Jusoh and Mohd Yazid, Yahya and Nur Izan Syahriah, Hussein (2016) The Effect Of Fibre Layering Pattern In Resisting Bending Loads Of Natural Fibre-Based Hybrid Composite Materials. MATEC Web Of Conferences, 39. 01005-1-01005-6. ISSN 2261-236X

Muhammad, Khairol Ridwan (2016) Development Of Fogging Robot By Using Arduino UNO And HC-05 Bluetooth Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf , Mohd Hanafi (2016) Performance Evaluation Of Active And Passive Filters For Harmonic Reduction In Electrical Distribution System Based On Synchronous Reference Frame (SRF). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Fadhil, Azwir (2016) A Study Of The Cascaded H-Bridge Multilevel Inverter Based On Supercapacitor For Harmonic Reduction. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Hakim, Ahmad Suhaimi (2016) Dynamic behaviour of biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Ilman Hakimi Chua, Abdullah and Mohd Fadzli, Abdollah and Noreffendy, Tamaldin and Hilmi, Amiruddin and Nur Rashid, Mat Nuri (2016) Effect Of Hexagonal Boron Nitride Nanoparticles As An Additive On The Extreme Pressure Properties Of Engine Oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792

Muhammad Kamal Aysraf, Pubin (2016) Surface roughness study on mild steel in high speed turning process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Khairi, Baharudin (2016) Effect of aspect ratio on strength of lattice structure manufacturing using 3D printer. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Nazirul Ifwat, Abd Aziz and Fauziyah, Salehuddin and Anis Suhaila, Mohd Zain and Khairil Ezwan, Kaharudin (2016) Electrical Characteristics Of PMOS Bulk Mosfet And PMOS Silicon-On-Insulator (SOI) MOSFET Device. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6315-6318. ISSN 1819-6608

Muhammad Nor, Nor Nazihah (2016) Development Of Overall Performance Effectiveness (OPE) At The Semiconductor Industry : A Case Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Said, Nurlaela and Ali, Mohd Basri and Zakaria, Kamarul Ariffin and Mohd Daud, Mohd Ahadlin (2016) Comparison Of Impact Duration Between Experiment And Theory From Charpy Impact Test. MATEC Web Of Conferences, 78 (-). pp. 1-8. ISSN 2261-236X

Muhammad Sazali, Muhammaas Ilyas Faiz (2016) Applying Green Building Strategies To A New Commercial Building (Restaurant). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Sazali, Muhammad Ilyas Faiz (2016) Applying Green Building Strategies To A New Commercial Building (Restaurant). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Muhammad Syafiq, Noor Azizi and Azahari, Salleh and Adib, Othman and Najmiah Radiah, Mohamad and Nor Azlan, Mohd Aris and Maisarah, Abu and Nornikman, Hassan and Mohamad Hafize, Ramli and Thailis Bounya, Ngelayang (2016) UWB Rectangular Slotted Microstrip Patch Antenna In Proximity Of Human Arm Model. Jurnal Teknologi, 78 (5-4). pp. 111-115. ISSN 0127-9696

Muhammad Syafiq, Noor Azizi and Azahari, Salleh and Adib, Othman and Nor Azlan, Mohd Aris and Najmiah Radiah, Mohamad and Maisarah, Abu and Nornikman, Hassan and Mohamad Hafize, Ramli (2016) Non-Ionizing (Ultra-Wideband Frequency) Electromagnetic Radiation Effect On Nerve Fiber Action Potential Of Human Body. Jurnal Teknologi, 78 (5-6). pp. 131-137. ISSN 0127-9696

Muhammad Zahir, Hassan and Mohd Kamarul Hafis, Abdul Aziz and Delbressine, Frank and Rauterberg, Matthias (2016) Numerical Analysis Of Spring Stiffness In Vehicle Design Development Stage. International Journal Of Applied Engineering Research, 11 (7). pp. 5163-5168. ISSN 0973-4562

Muhammad Zaki, Muhammad Asyraf Hakim (2016) Automotive Front Grille Energy Harvesting Using Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zuhair Bolqiah, Edris and Mohammed Saeed, Jawad and Zahriladha, Zakaria (2016) Surface Defect Detection And Neural Network Recognition Of Automotive Body Panels. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 117-122. ISSN 978-147998252-3

Muhammad Zuhair Bolqiah, Edris and Zahriladha, Zakaria and Mohd Shahril Izuan, Mohd Zin and Mohammed Saeed, Jawad (2016) Automated Deform Detection On Automotive Body Panels Using Gradient Filtering And Fuzzy C-Mean Segmentation. Jurnal Teknologi, 78 (6-8). pp. 93-99. ISSN 0127-9696

Muhd Fairus , Nizam Muhamad. (2016) Surface Tracking And Erosion Performance Insulation Material Under Different Frequency Behaviour. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhd Khairi, Abd Rahim and Auzani, Jidin and Fazlli, Patkar and Sundram, Ramahlingam and Yusnida, Ahmad Tarmizi and Huzainirah, Ismail and Siti Azura, Ahmad Tarusan (2016) Minimization Of Torque Ripple And Switching Frequency Utilizing Optimal DTC Switching Strategy For Dual-Inverter Supplied Drive. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 49-54. ISSN 978-146739572-4

Muhd Khairi, Abd Rahim and Auzani, Jidin and Tole, Sutikno (2016) Enhanced Torque Control And Reduced Switching Frequency In Direct Torque Control Utilizing Optimal Switching Strategy For Dual-Inverter Supplied Drive. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 328-339. ISSN 2088-8694

Munawar, Rose Farahiyan and Arif, Afraha Baiti and Wan Abdullah Shani, Wan Nur Fateehah and Mohd Abid, Mohd Asyadi Azam and Abd Manaf, Mohd Edeerozey and Abu, Maisarah and Zainal Abidin, Muhammad Zaimi and Ismail , Syahriza (2016) A Facile Coating Method for Superhydrophobic Magnetic Composite Sheet from Biodegradable Durian Peel for Electromagnetic Wave Absorbance Application. Key Engineering Materials, 694. pp. 39-43. ISSN 1662-9795

Muralidaran, Thanabalan (2016) Ship Tracking And Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murugesan , Sulakhsheme (2016) 77 GHz Antenna For Automotive Radar Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musa, Haslinda and Safri, Nursyairalia and Yunus, Ahmad Rozelan and OTHMAN , MOHD AZLISHAH (2016) The Characteristics of Users in the Adoption of Low Loss Microwaves Transmission Glass: A Conceptual Paper. Procedia - Social and Behavioral Sciences. pp. 548-554. ISSN 1877-0428

Musa, Haslinda and Shirly, Chung Hsian Li and Zuraida, Abal Abas and Norhidayah, Mohamad (2016) Adoption Factor Of Mobile Marketing: The Case Of Small Medium Enterprises In Malaysia. International Review Of Management And Marketing, 6 (7S). pp. 112-115. ISSN 2146-4405

Musa, Muhammad Rizan (2016) Study Of Fluid Flow In Different Fuel Rail Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musanib, Muzamir (2016) Qualitative Analysis Of Lubricant Oil From Fishing Boat Around Strait Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Musfirah, Abdul Hadi and Jaharah, A. Ghani and Che Hassan, Che Haron and Mohd Shahir, Kasim (2016) Effect Of Cutting Speed On The Carbide Cutting Tool In Milling Inconel 718 Alloy. Journal Of Materials Research, 31 (13). pp. 1885-1892. ISSN 0884-2914

Musli, Muhammad Fadzlan Farhan (2016) Tribological Properties Improvement Of Zinc Induced Canola Oil Bio-Lubricant With Addition Of Molybdenum Dthio Phosphate (MoDTP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muslim, Muhammad Shafiq (2016) Modeling And Analysis Of An Overcurrent Protection And Coordination In Power System Network Using PSCAD Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mustafa, Raihayu (2016) The Development Of Malacca River Plate And Its Impact On Entrepreneurial Intention Towards The Local Community. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa, Siti Khairunisa (2016) Consumer Preference Characteristics Towards Green Product: A Case Of Naturemill Bin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapa, Muhammad Zaki (2016) Proportional Integral Derivative Based Control For Autonoumous Vertical Take Off And Landing Of Quadcopter System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustapa, Siti Nure Fatima (2016) Development Of Easy And Quick Plug In Plastic Wall Tiles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapha, Ain Atiqa (2016) Low Power And High Efficiency Rectifying Circuit For Piezoelectric Energy Harvesting Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustapha, Mohamad Fatiri (2016) The Factors That Influencing To Use Social Media In Business. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustapha, Mohd Nazreen Izuan (2016) Incorporating Flywheel Hybrid Module In Automobile : A Comceptual Design Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mutalib, M. A and Zakaria, Zahriladha and Shairi , Noor Azwan and Mohamad Isa, Mohd Sa'ari (2016) Microstrip Bandpass Filter With Reconfigurable Notch Response At 5.2 GHz Using Defected Microstrip Structure. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (5). 75 - 79. ISSN 2289-8131

Mutalib, Mohamad Ariffin and Zakaria, Zahriladha and Shairi, Noor Azwan (2016) Microstrip Bandpass Filter With Tunable Notch Response At 5.2 GHz Using Defected Microstrip Structure. International Journal of Applied Engineering Research, 11 (14). 8104 - 8108. ISSN 0973-9769

N

Nadarajah, Vikneswaran (2016) Design And Analysis Of Object Locator In GPS Trilateration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadarajan, Kalegeswaree (2016) Development Of Smart Communication Tool For Assisting Stroke Patient. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nadiah Farhana , Hamzah (2016) Cataloging the industrial supplies parts for SAP ECC6 deployment a case study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nadlene , Razali (2016) The Effects Of Chemical Treatment On The Structural And Thermal,Physical, And Mechanical And Morphological Properties Of Roselle Fiber-Reinforced Vinyl Ester Composites. Polymer Composites. pp. 1-14. ISSN 1548-0569

Nadzri, Muhamad Naqib (2016) Oxidation Stability Comparison Between Zinc Dialkyldithiophosphate And Zinc Diamyldithiocarbamate Induced Palm Oil Biolubricants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Najmiah Radiah, Mohamad and Azahari, Salleh and Nik Mohd Zarifie, Hashim and Mohamad Zoinol Abidin, Abd Aziz and Zahriladha, Zakaria (2016) Modeling Of Wireless Energy Transfer Circuit And Implementation Of Wi-Tricity System Control Using Infrared And PIC Microcontroller. International Journal Of Engineering And Technology (IJET), 8 (2). pp. 1285-1294. ISSN 2319-8613

Nam, Jae Ning (2016) The Consumer Attitudes Toward Green Advertising Communication In Melaka, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Napi, Fauziah (2016) Circuit Defects Detection Of Flexible Printed Circuit By Electrophoretic Deposition Of Organic DYE. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasaruddin, Muhammad Muaz (2016) Development Of Finite Element Model For Polymer Lattice Structure With Different Aspect Ratio. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasir, Mohamad Faiezal (2016) Design Water Trash Collector Prototype For River Bank Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasirin, Naqiuddin (2016) FV Malaysia Race Car - Bodywork Design And Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nasri, Syaiful Syhwan (2016) Controller Tuning Using Optimization Technique For An Electro-Hydraulic Actuator System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nasri, Syaiful Syhwan (2016) Controller Using Optimization Technique For An Electro-Hydraulic Actuator System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nathan, Geevan (2016) A Smart Autonomous Fire Detector Which Deflects Obstacle On Pathway. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naziatul Fazilah, Mohd Zalani and Sivakumar, Dhar Malingam and Mohd Zulkefli, Selamat (2016) Tensile Properties Of Woven Kenaf Fiber Reinforced Polypropylene Hybrid Aluminium-Composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608

Nazreen, Waeleh and Zanariah, Abdul Majid (2016) A 4-Point Block Method For Solving Higher Order Ordinary Differential Equations Directly. International Journal Of Mathematics And Mathematical Sciences, 2016. pp. 1-8. ISSN 0161-1712

Ne'mat, Muhammad Najib Faiz (2016) The Effectiveness Of Using Phase Change Material (PCM) In Reducing Car Interior Temperature During Day-Time. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Ai Xin (2016) Design And Development Of Broader Viewing Angle Device For Motorcyclist To Improve Safety. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Chai Leik (2016) Improving Product Design Using Kano Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Chin Yong (2016) Development Of A Mobile Robot For Night Vision Assistive System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ng, Fong Ee (2016) Personal Communicator : Personal Medical Assistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Jack Kii (2016) Sensor Based Collision Avoidance Manipulator. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ng, Ji Jie (2016) Determinant Of Online Service Quality Towards Consumer Adoption Of Online Banking In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Kah Hoe (2016) Development Of Power Generator System Using Thermal Source From Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Mee Chin (2016) A Study To Determine The Best Combination Of FDM Process Parameters Using Taguchi Method To Optimize The Build Time And Surface Quality. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Qi Mun (2016) Design Of Manual Milling Operation Workstation For Product Dimensional Accuracy And Safe Posture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Shay Lee (2016) Bondability and reliability study on various silver plated copper leadframe with 25um wire diameter of gold and copper wire. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Yean Kit (2016) A TRIZ Approach To Reduce Unscheduled Downtime In Semiconductor Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngan, Mei Leng (2016) The Effect On Environmental CSR On Brand Reputation And Corporate Profitability In Service Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngelayang, Thailis Bounya (2016) Design And Optimisation Of Microelectroelectromechanical System (MEMS) Cochlear Biomodel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ngu, Ung Hie (2016) Effect Of Fibre Size And Sample Thickness On Kenaf Core As A Potential Acoustical Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Abdullah, Nik Nurul Nashreen (2016) Analysis And Simulation Of High Accurate Airborne Radar System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Azran, Ab Hadi (2016) Implementation And Effect Of Sensor Technology In Building Level Balancer Using Programmable Integrated Circuit Microcontroller. International Journal For Advance Research In Engineering And Technology, 3 (1). pp. 13-17. ISSN 2320-6802

Nik Yusoff, Nik Muhamad Zikrillah (2016) Alarm Pillow System Using Bluetooth System And Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nizam Uddin, Ahamed and Mahdi, Alqahtani and Omar, Altwijri and Matiur, Rahman and Kenneth, Sundaraj (2016) Age-Related EMG Responses Of The Biceps Brachii Muscle Of Young Adults. Biomedical Research, 27 (3). pp. 787-793. ISSN 0970-938X

Noel Francisco, Augustine (2016) Productivity improvement for visual inspection using lean concept : a case study at front of line process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Noor Azizi, Noor Syazwan (2016) Development Of Robot Following Human Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Shahida, Mohd Kasim and Rosdiadee, Nordin and Mahamod, Ismail (2016) Dynamic Fractional Frequency Reuse Based On An Improved Water-Filling For Network MIMO. KSII Transactions On Internet And Information Systems, 10 (5). pp. 2124-2143. ISSN 1976-7277

Noor Shahida, Mohd Kasim and Rosdiadee, Nordin and Mahamod, Ismail (2016) Power Allocation For Dynamic Fractional Frequency Reuse (DFFR) In Downlink LTE-A System. 2015 21st Asia-Pacific Conference On Communications, APCC 2015. pp. 12-16. ISSN 978-488552301-4

Nor Athira , Ali Osman (2016) Modelling And Analysis Of Fuel Cell With Battery Storage Microgris System Based On Green Energy. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Azizah, Mohd Yusoff and Kasrul, Abdul Karim and Sharin, Ab Ghani and Fazlli, Patkar and Siti Azura, Ahmad Tarusan and Auzani, Jidin (2016) Analysis Of Multiphase Transformer Supplying A Static And Dynamic Load. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8987-8991. ISSN 1819-6608

Nor Hamdan, Siti Nadzirah (2016) Case Study For The Effect Of Temperature Changes Towards Electricity Consumption In FTK Using Statistical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hamizah, Miswan and Nor Hafizah, Hussin and Rahaini, Mohd Said and Khairum, Hamzah and Emy Zairah, Ahmad (2016) ARAR Algorithm In Forecasting Electricity Load Demand In Malaysia. Global Journal Of Pure And Applied Mathematics, 12 (1). pp. 361-367. ISSN 0973-1768

Nor Hamizah, Miswan and Rahaini, Mohd Said and Nor Hafizah, Hussin and Khairum, Hamzah and Emy Zairah, Ahmad (2016) Comparative Performance Of ARIMA And DES Models In Forecasting Electricity Load Demand In Malaysia. International Journal Of Electrical & Computer Sciences IJECS-IJENS, 16 (1). pp. 6-9. ISSN 2227-2739

Nor Hisham, Nurul Asyikin Ahmad (2016) Synthesis Of Tio2 Nanostructure By Anodic Oxidation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Jalani, Muhammad Amirul Asyraf (2016) Optimization Of Microstrip Yagi-Uda Antenna For Wideband Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Nasarudin, Muhammad (2016) Incorporating Flywheel Hybrid Module In Motorcycle : An Embodiment Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Natasha, Che Pa (2016) Development Of Blind Spot Detection System For Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Rahman, Nor Hafiz (2016) Study On The Dielectric Strength Of Reclaimed Waste Cooking Palm Oil For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Rahman, Nor Hafiz (2016) Study On The Dielectric Strength Of Reclaimed Waste Cooking Palm Oil For Power Transformer Applications. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Nor Syaimaa, Mohd Zamil and Hanim, Abdul Razak and Hazura, Haroon and Anis Suhaila, Mohd Zain and Fauziyah, Salehuddin and Siti Khadijah, Idris (2016) The Potential Of Silicon Photonic Device Based On Tapered MMI Structure. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 131-135. ISSN 2180-1843

Nor Syamimi Farhana , Ghazali (2016) Design And Development Of Active Power Filter For Harmonic Reduction In Electrical Distribution System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noraiham, Mohamad and Mazliah, Mazlan and Jeefferie, Abd Razak and Nur Sharafina, Zainol and Amirul Asyraf, Mat Nasir and Hairul Effendy, Ab Maulod (2016) Compressive Properties Of Green Rubber Foam From Reclaimed Rubber Glove. International Journal of Materials And Product Technology, 53 (3-4). pp. 252-266. ISSN 0268-1900

Noraini, Mat Ali and Kok, Swee Leong and Ain Atiqa, Mustapha (2016) Experimental Investigation On Piezoelectric And Electromagnetic Hybrid Micro-Power Generator. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6366-6370. ISSN 1819-6608

Norazizan, Nurul Syafinaz (2016) Development Of Automatic Plate Washer Using Arduino Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Mohd Ariff (2016) Enhance The CPU Cooler Performance Using Evaporative Cooling Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nordin, Mohd Hisham (2016) Flip-Chip Bonding Using Laser Induced Ultrasonic Vibration. PhD thesis, Universiti Teknikal Malaysia Melaka.

Nordin, Nazmi Syazwan (2016) Optimization Of Microstrip Diamond Antenna For Dual-Band Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafiz, Salim and Takao, Tsuji and Tsutomu, Oyama and Kenko, Uchida (2016) Interface Flow Limit Identification Using Focused Time Delay Network For MEPS Transmission. Smart Grid Technologies - Asia (ISGT ASIA), 2015 IEEE Innovative. pp. 1-6. ISSN 978-150901238-1

Norida, Abdullah and Olurotimi Adebayo, Shonubi and Rahman, Hashim and Norhidayu, Ab Hamid (2016) Recognition And Appreciation And Its Psychological Effect On Job Satisfaction And Performance In A Malaysia IT Company: Systematic Review. IOSR Journal Of Humanities And Social Science (IOSR-JHSS), 21 (9). pp. 47-55. ISSN 2279-0845

Noridan, Norfadlihady Zharif (2016) Pneumatic Control Of Six Legged Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norihan, Abdul Hamid and Majlis, Burhanuddin Yeop and Yunas, Jumril and Ahmad Radzi, Syafeeza and Wong, Yan Chiew and Ibrahim , Mazree (2016) A Stack Bonded Thermo-Pneumatic Micro-Pump Utilizing Polyimide Based Actuator Membrane For Biomedical Applications. Microsystem Technologies, 22 (5). pp. 1-9. ISSN 0946-7076

Norizan, Annasuha (2016) The Improvised Design Of Headphone Using Integration Of Kano Model And QFD For Increasing Customer Satisfaction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nornikman, Hassan and Mohamad Zoinol Abidin, Abd Aziz and Muhammad Syafiq, Noor Azizi and Mohamad Hafize, Ramli and Mohd Azlishah, Othman and Hamzah Asyrani, Sulaiman and Badrul Hisham, Ahmad and Mohd Hafiz, Sulaiman (2016) Effect Of Quadruple P-Spiral Split Ring Resonator (QPS-SRR) Structure On Microstrip Patch Antenna Design. Jurnal Teknologi, 78 (5-5). pp. 119-123. ISSN 0127-9696

Norsani, Siti Hadijah (2016) Application Of AHP For Determining The Best Of Palm Oil Fresh Fruit Bunch. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norsiah, Hami and Mohd Razali, Muhamad and Zuhriah, Ebrahim (2016) The Impact Of Sustainable Manufacturing Practices On Sustainability. Jurnal Teknologi, 78 (1). pp. 139-152. ISSN 0127-9696

Nortazi, Sanusi and Azami, Zaharim and Sohif, Mat (2016) Wind Energy Potential: A Case Study Of Mersing, Malaysia. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7712-7716. ISSN 1819-6608

Nur Arba'ayah, Aziz (2016) Study and change of material on autovision machine unit stopper. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Nabila , Noor Azman (2016) Correlation Between Resistivity And Dielectric Performance Of Polymeric Material Insulation Under Standard Test Procedure. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Qurratul Ain, Adanan (2016) Integration of six-sigma and Kaizen approached for ball pin quality improvement in Malaysia haberdarshey industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nur Shaheera Alia, Sadick Ali and Mohamad Zoinol Abidin, Abd Aziz and Badrul Hisham, Ahmad and Mohd Azlishah, Othman and Hamzah Asyrani, Sulaiman (2016) Analysis Of Tapered Finline In Power Combiner For Wideband Application. Jurnal Teknologi (Sciences And Engineering), 78 (6-7). pp. 121-125. ISSN 0127-9696

Nur Shazwani, Aminuddin and Syafeeza, Ahmad Radzi and M., Abu and Norihan, Abdul Hamid (2016) A Computer-Based Touch-Less 3D Controller Using Capacitive Sensing Method. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 83-88. ISSN 2180-1843

Nurfa, Fahar (2016) Investigation of effect on input order selection in system identification. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurfaezatul Aqma , Dahlan (2016) Modelling And Analysis Microturbine With Battery Storage Microgrid System Based On Green Energy. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurhashikin, Mohd Salleh and Siti Rahayu, Selamat and Robiah, Yusof and Shahrin, Sahib (2016) Discovering Cyber Terrorism Using Trace Pattern. International Journal Of Network Security, 18 (6). pp. 1034-1040. ISSN 1816-353X

Nurliyana, Zulhanee (2016) Quality enhancement on safety pin at textile company using Kaizen approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nurul Ain, Mohd Said and Dan, Xiao and Rukmi, Dutta and John E., Fletcher (2016) Closed-Loop Control Strategy For PM Machines With Non-Sinusoidal Back-EMFs Using Dual-Inverter Open-End Winding. IECON 2015 - 41st Annual Conference Of The IEEE Industrial Electronics Society. pp. 2998-3003. ISSN 978-147991762-4

Nurul Akmal, Abd Salam and Wira Hidayat, Mohd Saad and Zahariah, Manap and Fauziyah, Salehuddin (2016) The Evolution Of Non-Invasive Blood Glucose Monitoring System For Personal Application. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 59-65. ISSN 2180-1843

Nurul Azuwa, Azmi and Umar Al-Amani, Azlan and Maziati Akmal, Mohd Hatta and Mohd Asyadi ‘Azam, Mohd Abid and Mohd Warikh, Abd Rashid (2016) A Study On (K, Na) NbO3 Thin Films With Optimized Layer: Effect On Physical And Electrical Properties. Key Engineering Materials, 694. pp. 120-124. ISSN 1662-9795

Nurul Iman, S B and Asmala, A. and Burhanuddin , Mohd Aboobaider and Hamzah , Sakidin and Fahmi , Razali and Mohd Sa'ari, Mohamad Isa (2016) RESTORATION OF HAZY SATELLITE DATA BASED ON SPECTRAL AND STATISTICAL METHODS. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 6807-6813. ISSN 1819-6608

Nurul Iman, Saiful Bahari (2016) A Haze Removal Technique For Satellite Remote Sensing Data Based On Spectral And Statistical Methods. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nurul Izah, Anuar and Adi, Saptari (2016) Performance Evaluation Of Different Types Of Particle Representation Procedures Of Particle Swarm Optimization In Job-Shop Scheduling Problems. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-5. ISSN 1757-8981

Nurul Nadia, Abd Aziz and Hazura, Haroon and Hanim, Abdul Razak (2016) Compact Optical Filter Based On Microring Resonator. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3320-3323. ISSN 1819-6608

Nurzaimah, Zainol and Zahriladha, Zakaria and Maisarah, Abu and Mawarni, Mohamed Yunus (2016) Stacked Patch Antenna Harmonic Suppression At 2.45 GHz For Wireless Power Transfer. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 96-100. ISSN 978-147998252-3

Nus, Mohd Shaiful Azri (2016) Optimization Performance Of Fiber Optic Sensor On Semi-Synthetic Test Oil For Engine Traditionally Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

O

Oh, Kok Ken (2016) Aerial Monitoring On Mango Using Machine Vision Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Olawale Friday, Ifayefunmi (2016) Buckling Behavior Of Axially Compressed Cylindrical Shells: Comparison Of Theoretical And Experimental Data. Thin-Walled Structures, 98. pp. 558-564. ISSN 0263-8231

Omar, Norazwani (2016) Evaluation Of Grid Connected Solar PV System Under Malaysia Environment. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Omar, Nurul Ain (2016) The Relationship Between Attitude And Entrepreneurial Intention Among Students (UTeM). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Nurul Farahin (2016) Automatic Lighting Control With Total Number Of Visitor Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Siti Nashayu (2016) Development Of Bluetooth Home Remote Switching Based On Android Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar Fouad, Mohammed and Burairah, Hussin and Abd Samad, Hasan Basari (2016) Operational Design And Modelling Of Fire Event Tracking System In Wireless Sensor Networks. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8525-8531. ISSN 1819-6608

Omer Basleem , Omer Mohamed (2016) Camera Tracking Human Movement Using Image Processing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Chai Teng (2016) Smart Data Recognition System For Seven Segment LED Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Chai Tin (2016) Simulation Based Machine Utilization Using Arena Simulation Software To Predict Future Capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Cheah How (2016) Development Of Unmanned Surface Vehicle. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ong, Chien Chung (2016) Structural Characterisation And Properties Of Lead-Free Solders On Different Surface Roughness Of Copper Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Ching Chow (2016) Factors Affecting Consumer Buying Decision Of E Commerce. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Hon Seng (2016) The Influence Of GST Implementation Towards GST Registered Companies In Selangor, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Kah Kah (2016) Productivity Measurement And Improvement In Product Design Process Using Lean Tools Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ong, Ong, Phaik Ling (2016) An Integrated Principal Component Analysis And Weighted Apriori-T Algorithm For Imbalanced Data Root Cause Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ong, Sze Mun (2016) Classification Of Domestic Electrical Appliances Based On Starting Transient Using Artificial Intelligence Methods. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Ong , Ting Yong (2016) Real Time Wireless Robotic Arm System By Using Leap Motion Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Onn Siam, Effendy (2016) Peripheral Interface Controller (PIC) Based Maximum Power Point Tracking (MPPT) Algorithm For Photovoltaic (PV) DC To DC Boost Converter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ooi, Pui Yin (2016) Study The Properties Of Ti-6A1-4V After The Gas Nitriding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Yee Khai (2016) Optimization Of Vision-Guided Mobile Robot Navigation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ooi, Yi Fong (2016) Development Of LCD Display Data Capturing System For Industrial Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Osman, Edynoor and Abd Rashid , Mohd Warikh and Abd Manaf, Mohd Edeerozey and Mohamad, Effendi and Salleh, Mohd Rizal and Ito, Teruaki and Moriga, Toshihiro (2016) Hygrothermal Effect on Mechanical and Thermal Properties of Filament Wound Hybrid Composite. Journal of Advanced Manufacturing Technology (JAMT) . pp. 1-12. ISSN 1985-3157

Osman, Mohamad Aliff (2016) Development Of Control Fan Speed By Automatic Temperature Sensor Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Abdul Halim (2016) The Impact Of Brand Image Toward Consumer Loyalty In Context Of Malaysia Local Franchise In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Intan Safina (2016) The Awareness Of Information Security Breach Among User IT In KPTMBP. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Intan Sharhida (2016) Electrodeposition Of Nickel Coatings On Aluminium Alloy 7075 Through A Modified Single Zincating Process. PhD thesis, Universiti Teknikal Malaysia Melaka.

Othman, Muhammad Iskandar (2016) Development Of Biodegradable Plastic With Natural Sources As Packaging Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Noor Fajriena (2016) Effect Of Tilt Angle On Dummy Signal Powered By Solar Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Othman, Nurhazwani (2016) The Relationship Between Training And Development Activities With Innovative Work Behaviour Among SMEs. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ow, Li Lee (2016) PORElicit A Pair Oriented Approach For Improving Multi-Lingual Requirements Elicitation For Requirements Engineers. Masters thesis, Universiti Teknikal Malaysia Melaka.

P

Pang, Hui Ye (2016) The Knowledge, Skills And Consumer Behaviors As Influencers Of Green Entrepreneurship Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Parsih, Siti Nur Hidayah (2016) Power Meter Reading Of Load Control Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pawanteh, Mohamad Ridzuan (2016) Enhancement The Performance Of Handling Unit Using Hydronic Heating System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Peggy, Tan Peck Gee (2016) Acoustic Wave Signal Analysis Using Piezoelectric Coupling Device For Disc Counting Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Peh, Thai Ee, Perly (2016) An Integration Of AHP-ACO Technique For Social Interaction And Travel Planning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Perpustakaan, UTeM (2016) Laporan Tahunan Perpustakaan 2013-2016. UTeM, Melaka, Malaysia. (Submitted)

Perumal, Usha Nantini (2016) Development Of Test Data Navigator Tool (TDN). Masters thesis, Universiti Teknikal Malaysia Melaka.

Phoo , Kho Shin (2016) Design Of Compact Tri-Polarized Antenna For Multiple Input Multiple Output (MIMO) System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Piramli, Muhamad Marzuki and Abdul Rahman, Ahmad Fadzli Nizam and Abdullah, Siti Fairuz (2016) Rice Grain Grading Classification Based On Perimeter Using Moore-Neighbor Tracing Method. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 23-27. ISSN 2289-8131

Prajanto Wahyu, Adi and Farah Zakiyah, Rahmanti and Nor Azman, Abu (2016) High Quality Image Steganography on Integer Haar Wavelet Transform using Modulus Function. 2015 International Conference On Science In Information Technology (ICSITech). pp. 79-84. ISSN 978-147998386-5

Pungot, Siti Fairuz (2016) Development Of Arduino Base Orienteering Sport Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Q

Qasem Abdo, Saddam Abdullah (2016) Design And Development Of Microstrip Patch Antenna For GSM Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Qasem Ahmed, Sharif Ahmed and Husain, Mohd Nor and Zakaria, Zahriladha and Mohd Zin, Mohd Shahril Izuan and Alhegazi, Ammar (2016) Rectenna Designs For RF Energy Harvesting System : A Review. Journal On Communications Antenna And Propagation (IRECAP), 6 (2). 82 - 89. ISSN 2039-5094

Qasem Ahmed, Sharif Ahmed and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah (2016) Microstrip Antenna Design With Circular Polarization Property For RF Energy Harvesting Application. International Journal of Applied Engineering Research, 11 (6). 4398 - 4401. ISSN 0973-4562

Quah, Jit Shen (2016) Development And Analysis Of Face Recognition System On A Mobile Robot Environment. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Quah, Kai Theng (2016) The Effect Of Inventory Management On Competitive Advantage : A Study On Manufacturing SME In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Queh, Chen Huan (2016) The Relationship Between Human Resource Development, Personality, And Innovative Work Behaviour : A Case Study Of Manufacturing Companies In Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Qumrul, Ahsan and Law, Mei Lin and Rose Farahiyan, Munawar and Noraiham, Mohamad (2016) Effect Of Recycled Carbon Fiber Reinforcement On The Wear Behavior Of Epoxy Composite. Journal Of Materials Research, 31 (13). pp. 1900-1907. ISSN 0884-2914

R

R. Sudha, Nair and Hanipah, Hussin (2016) Shaping The Curriculum: A Characteristics Approach And Its Impact On Teaching And Learning. Social Sciences, 11 (9). pp. 2054-2057. ISSN 1818-5800

Rabi, Raifiuddin Akram (2016) Effectiveness Of Battery Capacity On Engine Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Radzali, Muhammad Nabil Naim (2016) Optimization Of Tribological Performance For Purify Engine Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahim, Sarni Suhaila (2016) Automatic Screening And Classification Of Diabetic Retinopathy Eye Fundus Images. PhD thesis, Universiti Teknikal Malaysia Melaka.

Rahkinoor, Muhammad Zulfikri (2016) A Development Of Wireless Power Transfer Using Capacitive Method For Mouse Charging Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahmam, Muhammad Syahmi (2016) Study On The Power Produced From Waste Heat Recovery. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Aparow, Vimal Rau and Jamaludin, Hishamuddin (2016) Simulation of Hybrid Electric Vehicle based on a Series Drive Train Layout. Jurnal Teknologi, UTM, 78 (6). pp. 211-221. ISSN 0127-9696

Rahmiyeni , Aswir (2016) Optimum Design Of Rectifying Circuit Of RF Energy Transfer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Idris, Raja Alif Fikri (2016) Microwave Diplexer Design For WLAN Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Nor Firdaus Kashfi, Raja Othman and Farina, Sulaiman and Suhairi Rizuan, Che Ahmad and Kasrul, Abdul Karim and Auzani, Jidin and Tole, Sutikno and Norhisam, Misron (2016) Design Of Hollow-Rotor Brushless DC Motor. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 387-396. ISSN 2088-8694

Raja Nor Firdaus Kashfi, Raja Othman and Siti Zulaika , Mat Isa and Suhairi Rizuan , Che Ahmad and Nor Aishah, Md Zuki and Aziah , Khamis and Md Nazri , Othman (2016) Design A Slot-Less Linear Actuator For Food Processing Application. Journal Of Telecomunication Electronic And Computer Engineering, 8. pp. 87-91. ISSN 2180-1843

Raja Seman, Raja Noor Amalina (2016) Direct Growth Of Vertically Aligned Carbon Nanotube (VACNT) On Different Conducting Substrates For Electrochemical Capacitor (EC). Masters thesis, Universiti Teknikal Malaysia Melaka.

Raja Sigran, Kokilavani (2016) GPS And GSM Based Livestock Tracking System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rajoo, Piragas (2016) Emergency Alert System And Data Recording In A Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramdan, Nur Sufiah Akmala (2016) Computer Vision System For Monitoring Body Discomfort In Manufacturing Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramlan, Muhammad Amirul Faez (2016) Terminal Identifier Design For Single Phase AC Motor Using Microcontroller-Based Voltmeter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Bizora (2016) Topology Optimization Of Mold Base Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Nur Fazlin Atiqah (2016) Temperature Monitoring System For Baby Using Web-Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Siti Aishah (2016) Green IT Adoption For Eco-Efficiency: A Case Study At Kementerian Tenaga, Teknologi Hijau Dan Air (KeTTHA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ramli, Sofia Najwa (2016) An Electrocardiogram-Based Authentication Protocol In Wireless Body Area Network. PhD thesis, Universiti Teknikal Malaysia Melaka.

Rammah Ali, Hussien Al-Ahnomi and Zahriladha, Zakaria and Eliyana, Ruslan and Amyrul Azuan, Mohd Bahar (2016) A Novel Symmetrical Split Ring Resonator Based On Microstrip For Microwave Sensors. Measurement Science Review, 16 (1). pp. 21-27. ISSN 1335-8871

Rammah Ali, Hussien Al-Ahnomi and Zahriladha, Zakaria and Eliyana, Ruslan and Amyrul Azuan, Mohd Bahar (2016) A Novel Symmetrical Split Ring Resonator Based On Microstrip For Microwave Sensors. Measurement Science Review, 16 (1). 21 - 27. ISSN 1335-8871

Rammah Ali Hussien, Al-Ahnomi and Zahriladha, Zakaria and Eliyana, Ruslan and Amyrul Azuan, Mohd Bahar and Siti Rosmaniza, Ab Rashid (2016) A High Sensitive Microwave Sensor Based On Symmetrical Split Ring Resonator For Material Characterization. Microwave And Optical Technology Letters, 58 (9). 2106 - 2110. ISSN 1098-2760

Rashid, Muhammad Arif (2016) Design Remote Terminal Unit (RTU) Voltage Regulator. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rashid, Muhammad Arif (2016) Design Remote Terminal Unit (RTU) Voltage Regulator -. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Ravichandran, Nagalingam (2016) Enhancing manufacturing efficiency through establishing an excellence operating system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ravindran, Diventhiran (2016) Study On The Effect Of Variation In ECU Parameters To The Engine Performance Of A Turbo Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razak, Muhammad Shahmi (2016) Flexural Test On Virgin And Recycle HDPE Specimen. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Muhammad Razmi (2016) The Model And Evaluation Of Swaying Arm To The Torso Torque Of Humanoid Robot During Walking. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril (2016) Hydrogen Inlet Pressures Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3875-3882. ISSN 1819-6608

Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril and Mohamad Basir, Muhammad Sufyan Safwan (2016) Stack Temperature Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. Journal Of Scientific Research And Development, 3 (5). pp. 63-68. ISSN 1115‐7569

Razali, Nabilah (2016) Determinants Of Entrepreneurial Activity In Food And Beverage Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Rasidah (2016) Development Of PC-Based Heart Rate Monitoring Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Roslina (2016) Redesign Of Weaving Department Layout Using Systematic Layout Planning (SLP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Sharifah Nadiyah (2016) Online Project Based Collaborative Learning Model To Enhance Students Soft Skills. PhD thesis, Universiti Teknikal Malaysia Melaka.

Razali, Siti Fadilah (2016) Database System For Laboratory Components. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razman, Muhammad Shaznil Izwan (2016) Study On The Performance Of Internal Combustion Engine By Implementing The Air Cooler For Intake Manifold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razmi, Rusminurlah Faizzuan (2016) Controlling The Association Of Lightning Electrostatic Field In Lightning Radiation Field Measurement System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razuin, Mohd Amirul Hafiz (2016) Optimization Of Composite Of Aerospace Towards Tensile Strength Using Design Of Experiment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Redzuan, Edzmir (2016) Automatic Crash Notifier System For Motorcyclists. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Redzuan , Abdul Manap (2016) Nonparametric Quality Assessment Of Natural Images. IEEE Multimedia, 23. pp. 22-30. ISSN 1070-986X

Rengasammy , Manimegalai (2016) Design Of Antenna with Harmonic Suppression For RF Energy Scavenging. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ridhwan , Jumaidin (2016) Characteristics Of Thermoplastic Sugar Palm Starch/Agar Blend: Thermal,Tensile,And Physical Properties. International Journal Of Biological Macromolecules, 89. 575–581. ISSN 0141-8130

Ridzuan, Mohd Rasyidi (2016) Active Suspension Control Using Multiorder PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Robert@Kerk, Swee Tian (2016) Development Of Lean Environmental Management Intergration System For Sustainbility Of ISO 14001:2004 Standard. PhD thesis, Universiti Teknikal Malaysia Melaka.

Robiah, Yusof and Mohd Zaki, Mas'ud and Siti Rahayu, Selamat and Mohd Faizal, Abdollah and Shahrin, Sahib and Rudy Fadhlee, Mohd Dollah (2016) Formulating Generalize Malware Attack Pattern Using Features Selection. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3385-3390. ISSN 1819-6608

Rodwan, Muhammad Rohaizad (2016) Tribological Property Modification Profiling Of Palm Oil Through Addition Of Zinc Dialkyldithiophosphate (ZDDP). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohaizat, Nur Shahira (2016) Development Of Supervisory Control And Data Acquisition (SCADA) System For Essence Oil Production Plant. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohisham, Ramlan (2016) Symmetrical High-Speed Digital Subscriber Line (SHDSL) Channel Modelling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosdi, Rafi'uddin (2016) Development Walking Stick With Heart Attack Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nur Masturina (2016) Electric Profiler System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nur Saidatul Akmal (2016) Production And Characterization Of Biodiesel Derived From Palm Oil And Waste Cooking Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nurul Lieyana (2016) Preliminary Study Of The Capability Using Lube Oil Based On Local Virgin Coconut Oil For Automotive Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosley, Mohammad Nazry and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Zakaria, Muhammad Zulfattah and Mat Yamin, Ahmad Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine. In: The 4th International Conference on Engineering and ICT (ICEI 2016), 4 April 2016 - 6 April 2016, Hatten Hotel Melaka. (Submitted)

Rosli, Mohd Nabil Fikri (2016) Study Of Speed Control For An Electric Bicycle Based On PID Control Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Muhammad Fiqri Ariff (2016) Band-Notched Ultrawide Band Antenna For Indoor And Wearable Wireless Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosli, Muhd Izwan Ikhmal (2016) Development Of Heavy Duty Automatic Guided Vehicle For Industrial Application (AGV). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Muhd Izwan Ikhmal (2016) Development Of Heavy Duty Automatic Guided Vehicle For Industrial Application (AGV). Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Rosli, Norazman (2016) Design And Analyze Active Filter For Ferroresonance Suppression Circuit (FSC). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rosly , Muhammad Imran (2016) Design And Development Of Antenna With Frequency Selective Surfaces (FSS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rossli, Muhammad Hazwan (2016) Investigation Of Multiple Cooling Coil Effect In Hydronic Radiant Cooling System For Air Handling Unit (AHU) Purposes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rostam Affendi, Hamzah and Haidi, Ibrahim (2016) Literature Survey On Stereo Vision Disparity Map Algorithms. Journal Of Sensors, 2016. pp. 1-23. ISSN 1687-725X

Rozaimi, Ghazali (2016) Analysis Of 3D Gantry Crane System By PID And VSC For Positioning Trolley And Oscillation Reduction. Jornal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 139-143. ISSN 2180-1843

Rozaimi, Ghazali (2016) Controller Parameter Optimization For An Electro-Hydraulic Actuator System Based On Particle Swarm Optimization Technique. Jurnal Teknologi, 78 (1). 101–108. ISSN 0127-9696

Rozaimi, Ghazali (2016) The Effects Of Parameter Variation In Open-Loop And Closed-Loop Control Scheme For An Electro-Hydraulic Actuator System. International Journal Of Control And Automation, 9 (1). pp. 283-294. ISSN -

Rozaimi, Ghazali (2016) An Experimental Of 3D Gantry Crane System In Motion Control By PID And PD Controller Via PFPSO Optimization. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 133-137. ISSN 2180-1843

Rozaimi, Ghazali (2016) Optimization Of Sliding Mode Control Using Particle Swarm Algorithm For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 71-76. ISSN 2180-1843

Rozaimi, Ghazali (2016) PID Control Tuning Using PSO For Prosthetic Hand System. International Journal Of Applied Engineering Research, 11. pp. 10274-10280. ISSN 0973-4562

Rozaimi, Ghazali (2016) Parameter Estimation Technique Of Nonlinear Prosthetic Hand System. International Journal Of Engineering And Technology, 8. pp. 2161-2168. ISSN 2319-8613

Rozaimi, Ghazali (2016) Position Tracking Optimization For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 1-6. ISSN 2180-1843

Rozaimi , Ghazali (2016) Linear And Nonlinear Dynamic Modelling Of Motorized Prosthetic Hand System. Journal of Theoretical and Applied Information Technology, 93 (1). pp. 236-232. ISSN 1992-8645

Rozali, Amaluddin (2016) Development Of Portable Electricity Generator Using Peltier For Small Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozlan, Muhammad Rozaini (2016) Automatic Cooling System Using Peltier Thermoelectric Cooler For Lighting Detection Application With Smart Control And Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozman, Rozaidi (2016) Design And Development Of Food Waste Compactor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rozmi, Ismail and Mohamad Hanif, Md Saad and Mohd Jailani, Mohd Nor and Redzwan, Rosli (2016) Drivers’ Readiness To Use Car Driving Simulator As A Tool To Improve Driving Skill: A Preliminary Study. Jurnal Teknologi, 78 (6-9). pp. 137-142. ISSN 0127-9696

Rozuli, Nurul Atikah (2016) Design And Analysis Of Optimum Clearance Of An Open Small Thimble Bending Die. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rumai, Gomer (2016) Design And Analysis Of Chute And Loader System For A Farming Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruslan, Rohaizad (2016) Effect Of Powder Polypropylene Size On The Properties Of Graphite-Stannum-Polypropylene Composite For Bipolar Plate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

S. Ravinthiran, Sharmila (2016) The Implementation Of Garbage Enzyme System On Organic Waste In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sa'adah, Daud and Aida Fazliana, Abdul Kadir and Gan, Chin Kim (2016) The Impacts Of Distributed Photovoltaic Generation On Power Distribution Networks Losses. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 11-15. ISSN 978-146739572-4

Sa'aya, Nurul Afiqah (2016) The Residue Of Oil Palm (Empty Fruit Bunch) As Fiber Reinforcement With The Comparison Between Epoxy And Polyester As Matrix In Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sa'ban, Mohamad Hafez (2016) Filtration Test Rig Performance Based On Dimensional Analysis And Similarity Check. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saad, Mohammad Zyzerull (2016) Controller Design Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saad, Mohammad Zyzerull (2016) Controller Design Of Multifunctional Prosthetic Hand. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Saadon, Huwaidah (2016) Optimization Of Drilling Parameters On Diameter Accuracy In Dry Drilling Process Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saari, Saadatunur (2016) Quality Enhancement In Fan Cowl Assembly In An Aero Composite Manufacturing Company Using DMAIC Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sabari, Afiqah (2016) Harmonics Minimization Of A Three Phase Cascaded H-Bridge Multilevel Inverter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sabikan, S. and Nawawi, S.W. (2016) Open-Source Project (OSPs) Platform for Outdoor Quadcopter. Journal of Advanced Research Design, 24 (1). pp. 13-27. ISSN 2289-7984

Sabri, Muhammad Ashraf (2016) Design Of RF Power Amplifier With Different Biasing Based On Green Design Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sabri, Siti Sabariah (2016) Design And Development Of X-Band Hybrid Bandstop Filters. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saeed, Ali Kareem (2016) Modeling For Reduction Of Harmonics Using Inverters In Smart Grid System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safaei, Javad (2016) Power And Electricity Bill Monitoring On Smart Phone. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Safarudin Gazali, Herawan and Abdul Hakim, Rohhaizan and Ahmad Faris, Ismail and Shamsul Anuar, Shamsudin and Azma, Putra and Musthafah, Mohd Tahir and Ardika Ridal, Awang (2016) Prediction On Power Produced From Power Turbine As A Waste Heat Recovery Mechanism On Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling And Simulation In Engineering, 2016. pp. 1-12. ISSN 1687-5591

Safiee, Muhammad Akmal Safira (2016) Design Of Real-time Human Machine Interaction For Robotic Arm With Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sahat, Norasyikeen (2016) Intelligence Letter Box Using GSM And Arduino With Automatic Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Said, Siti Hajar (2016) Modelling And Forecasting Student's Residential Area Electricity Demand Using Statistical Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saidin, Muhammad Ameerul Afiq (2016) Light Control System Using Z-Wave. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saif Aldin Saleh , Abdelhamid Hassan (2016) Street Light Monitoring And Control Using Low Cost Microcontroller System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Saiful Azran, Nurul Izzaty Syafinaz (2016) FPGA – Based Line Following Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Bahari, Nurul Iman and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Razali, Muhammad Fahmi and Sakidin, Hamzah and Mohamad Isa, Mohd Sa'ari (2016) Restoration Of Hazy Data Based On Spectral And Statistical Methods. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 6807-6813. ISSN 1819-6608

Saiful Izwan, Abd Razak and Izzati Fatimah, Wahab and Mohammed Rafiq, Abdul Kadir and Ahmad Zahran, Md Khudzari and Abdul Halim, Mohd Yusof and Farah Nuruljannah, Dahli and Nadirul Hasraf, Mat Nayan and T. Joseph Sahaya, Anand (2016) Biomimetic Growth Of Hydroxyapatite On Kenaf Fibers. BioResources, 11 (1). pp. 1971-1981. ISSN 1930-2126

Saifullah, Nasrullah and Zahriladha, Zakaria and Salleh, Azahari and Muhamad Fadzil, Muhamad Fadhli and Ab Rashid, Siti Rosmaniza and Jiim, Anthony Bruster (2016) Low Noise Amplifier Application Using Negative Feedback For Ultra-Wideband Applications. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3295 - 3299. ISSN 1819-6608

Sakthi Velu, Vasanthan (2016) Positioning Control Of A 1-DOF Pneumatic Muscle Actuator (PMA) System With Modified PID Plus Feedforward Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classic Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation (IJCA), 9 (4). pp. 301-312. ISSN -

Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classical Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation, 9 (4). pp. 301-312. ISSN 2005-4297

Salahuddin, Lizawati (2016) Antecedents Of Safe Use Of Hospital Information Systems Based On Sociotechnical Perspective. PhD thesis, Universiti Teknikal Malaysia Melaka.

Salam, Saifullah (2016) Multi Objective Optimization Using Non-Dominated Sorting Approach For Load Frequency Control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saleh, Nurul Sazwani (2016) Study Of Puyuh Farm Environment Control System Using PLC Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salikin, Khalid Nor (2016) Development Of Fuzzy Control And Trajectory Planning For NAO Humanoid STS Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salim, Mohd Azli (2016) Study Of Transmissibility Of Laminated Rubber-Metal Spring. PhD thesis, Universiti Teknikal Malaysia Melaka.

Salim, Nurul Arina (2016) Design And Analyze Of Application Of Optical Amplifier In Submarine Fiber Optic Cable Communication Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salleh, Amy Rasyidah (2016) The Development Of Microcontroller Based Wireless Stolen Car Detection System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Safian, Mohd Azizul Hikmi and Yahaya, Saifudin Hafiz (2016) Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). p. 1. ISSN 1985-3157

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Salleh, Nur Akhlima (2016) The Relationship Between Entrepreneurship Education And Entrepreneurial Intentions Among UTeM Students. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salleh, Nur Hidayu (2016) Localization Technique Based On Time Difference Of Arrival For Tracking Application In Wireless Sensor Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Salleh, Nur Syahidah (2016) The Effect Of Heating Rate And Sintering Temperature On Glass Ceramic Composite At Different Filler Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sam, Seng Yang (2016) Design And Development Of A Low Power Compact Integrated Processor Of An Embedded System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samad, Mohd Arifin (2016) A Study Of The Effect Of Inlet Pipe Angle In Catalytic Converter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samad Fatimi, Farah Ezlin (2016) The Study Of Conversion Unit From Pixel To A Distance Measurement Acquired By Vision System Using Matlab Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samat, Nurul Basyirah (2016) Energy Audit For Lighting And A/C In Academic Building - Case Study In IKM Bintulu. Masters thesis, Universiti Teknikal Malaysia Melaka.

Samser, Ahmad Zuhair 'Umarah (2016) Child Location Tracker. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsuddin, Nur Shazwani (2016) Preliminary Study On Elasticity Profile Of Kenaf Fiber And Polyester Resin As Composite Fiber Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Ahmad Yusup (2016) Autonomous humanoid body balance while carrying an object. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Faris (2016) Temperature Control Device For Electric Kettle Using Bang-Bang Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Nur Alina (2016) Analysis On Human Factor For Manual Handling Worker And Design For Improvement Of Table Workstation In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Tajul Rosli (2016) Smart Self-Drying With Anti-Bacteria Clothes Blinds. Project Report. UTeM, Melaka, Malaysia. (Submitted)

San, Chee Hou (2016) The Implementation Of 5S In Manufacturing Industries : A Case Study Of Foreign Workers In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sanuri, Izzah (2016) Keberkesanan Perisian Multimedia Interaktf Untuk Meningkatkan Kefahaman Murid Di Dalam Subtopik Sejarah Tahun 4. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sanusi , Syamim (2016) Performance Evaluation Of Space Vector Modulation (SVM) For Multilevel Inverters. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sapani, Fatin Munirah (2016) An Investigation On External Corrosion Of Tempered Dual Phase Steel Welded Plate In NaCI Solutions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapani, Norshafiyanarina (2016) Bees Algorithm Inspired By Grenade Explosion Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sapar, Ahmad Farid (2016) Modeling Of Islanding Detection Methods For Microgrid. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sapardin, Siti Azureen (2016) Product Improvement Of Cornell CFF-12P Fan By Design For Assembly Method (Boothroyd Dewhurst). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saparuddin, Mohd Faizal (2016) Development Of Automatic Door With Counter Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saraji, Mohamad Syarifuddin (2016) Develope A New Design Of Fabric Dryer Chamber Prototype. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saravanan, Yuvarajan (2016) Automatic Vehicle Accident Alert And Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sariman, Mohamad Zaharudin (2016) Modelling And Control Of A Semi-Active Magnetorheological Damper For Engine Mounting Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sariman., Mohamad Sahrul Aizat (2016) Architecture, Implementation And Application Of Complex Event Processing In Bus Information Systems Based On Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarjuni, Noor Afiqah Nabila (2016) Semisolid Processing Of Aluminium LM6 Alloy Using Cooling Slope Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarmawi, Siti Nur Hellena (2016) Analysis And Modernization Of Local Area Network (LAN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seah, Joon Mun (2016) Types Of Training Towards Employee Performance In Technopreneurial Firm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sebli, Shamsuzzila (2016) Development Of Bus Alert System Using RF Transmission With LCD Display For Student Conveniences. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Segai, Emmylin (2016) Improvised Sensing Properties With Zinc Oxide Coated For Single Mode And Multimode Fiber Optic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Segar, Amardas (2016) Solar Watering System Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seha, Mohd Saffar and Fairul Azni, Jafar and Zamberi, Jamaludin (2016) Methodology On Investigating The Influences Of Automated Material Handling System In Automotive Assembly Process. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-10. ISSN 1757-8981

Seik Heng, Kai (2016) Adaptive simplified fuzzy logic controller of unmanned underwater vehicle for depth and pitch control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sek, Yong Wee and McKay, Elspeth and Deng, Hepu (2016) The Effect Of Learning Preferences On Learners' Motivations: Towards An ARCS Motivational Design In Open Learner Models. 2015 IEEE Conference On e-Learning, e-Managernent And e-Services. pp. 52-57. ISSN 978-146739437-6

Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and YAAKOB, MOHD YUHAZRI and Azma, Putra and Sivakumar, Dhar Malingam (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2180-1606

Selamat, Mohd Zulkefli and Muhammad Yusri , Md Yusuf and Sivakumar, Dhar Malingam (2016) Effect of formation temperature on properties of graphite/stannum composite for bipolar plate. In: none, none, none.

Selamat, Mohd Zulkefli and Razi, Mashitah and Kasim, Ayu Natasya and Dharmalingam, Sivakumar and Putra, Azma and Yaakob, Mohd Yuhazri and Mohd Daud, Mohd Ahadlin (2016) Mechanical Properties Of Starch Composite Reinforced By Pineapple Leaf Fiber (Plf) From Josapine Cultivar. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608

Selamat, Mohd Zulkefli and Sivakumar, Dhar Malingam (2016) Effect of carbon nanotubes loading in multifiller polymer composite as bipolar plate for PEM fuel cell. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment, 4-6 August 2015, Penang, Malaysia.

Selamat, Mohd Zulkefli and Sivakumar, Dhar Malingam and Azma, Putra and Ahadlin, Mohd Daud and Yuhazri, Yaakob (2016) MECHANICAL PROPERTIES OF STARCH COMPOSITE REINFORCED BY PINEAPPLE LEAF FIBER (PLF) FROM JOSAPINE CULTIVAR. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608

Selvaindran, Priya (2016) Customer Satisfaction Towards Online Shopping For An Organization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Selvaraju, Kalaiselvan (2016) Increasing ABB Flexpicker Robot's Degree Of Freedom For Automated Product Assembly Task. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Semi, Mohammad Fazrin (2016) Smart Fuel System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Seow, Liang Hau (2016) Productivity Improvement Using Lean Six Sigma Techniques : A Case Study At Semiconductor Equipment Manufacturer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Seyed A., Shahahmadi and Ahmad Aizan, Zulkefle and A.K.M., Hasan and S.M., Rana and Badariah, Bais and Md D., Akhtaruzzaman and Abdul Rahman M., Alamoud and Nowshad, Amin (2016) Ge-Rich SiGe Thin Film Deposition By Co-Sputtering In In-Situ And Ex-Situ Solid Phase Crystallization For Photovoltaic Applications. Materials Science In Semiconductor Processing, 56. pp. 160-165. ISSN 1369-8001

Sha'arani, Fatin Izzati (2016) Optimization Of Injection Moulding Parameters Of Three Plate Injection Mould Using Flow Analysis Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaaban, Azizah and Yip, Hing Lum and Mohamad, Noraiham and Dimin, Mohd Fairuz (2016) Slow Release Of Urea Encapsulated By Starch PVA Matrix. Key Engineering Materials, 707. pp. 28-31. ISSN 1662-9795

Shafei, Siti Azian (2016) Fabrication Of Green Polymeric Tiles From Polypropylene And Tapioca Starch Compound. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafiee, Super and Mai Mariam, Mohamed Aminuddin and Hairulisam, Md Dom (2016) Comparison Of Meaningful Sound vs No Sound For Avoiding Attention Drifting Phenomenon While Driving. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 19-23. ISSN 2180-1843

Shafiei, Nuraini and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Mohd Firdaus, Mohd Ab Halim and Mohd Shahrieel, Mohd Aras and Arman Hadi, Azahar (2016) Development of Portable Air Conditioning System Using Peltier and Seebeck Effect. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) . pp. 97-100. ISSN 2180-1843

Shafii, Syahfinash (2016) Character Recognition Using Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahad, Falih Khlaif (2016) Modeling Of Electrical Distribution Networks With Particle Swarm Optimization Technique For The Improvement Of Voltage Profile And Loss Reduction. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shahrin, Sahib (2016) Anugerah Akademik Universiti 2015. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Anugerah Bakti Dan Kecemerlangan Pelajar UTeM 2015. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Executive Talk MOOC – Mr. Adam Brimo. [NC Speech] (Submitted)

Shahrin, Sahib (2016) ICOHAT 2016. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Karnival FTMK. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Anugerah Sukan UTeM (MASUTeM) 2016. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Homecoming Alumni UTeM. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Iftar Bersama TYT Tun Datuk Seri Utama Mohd Khalil Bin Yaakob Canselor UTeM (1437H). [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Jasamu Dikenang (2016). [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Menandatangani Memorandum Persefahaman (MoU) Antara Universiti Teknikal Malaysia Melaka Dan Southeast Asian Ministers Of Education Organizations (SEAMEO) Special Education Network. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Pelancaran Knowledge Transfer Program (KTP). [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Pelancaran Perkhidmatan Baru Perpustakaan. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Pelancaran Sesi Intervensi Program Lonjakan Pencapaian Bahasa Inggeris UPSR 2016, Yayasan Melaka-UTeM-JPN. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Penutup Konvensyen Kumpulan Inovatif Dan Kreatif (KIK) Universiti Teknikal Malaysia Melaka Kali Ke-2. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Perasmian Karnival Gen Y Malaysia Dihatiku 2016 Peringkat UTeM. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Perasmian Minggu Haluan Siswa. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Majlis Ramah Mesra Alumni UTeM Yang Berkhidmat Di UTeM Bersama Naib Canselor. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Malam Citra Merdeka. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Mesyuarat Agung Dan Jamuan Raya KEKUTeM. [NC Speech] (Submitted)

Shahrin, Sahib (2016) MoU Signing And Closing Ceremony Of Infineon Week@UTeM 2016. [NC Speech] (Submitted)

Shahrin, Sahib (2016) National Science Competition For Melaka State. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Pertandingan Akhir Pidato Piala Naib Canselor. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Program Motivasi Peringkat Sekolah Rendah Dun Durian Tunggal (Xplorasi Robot). [NC Speech] (Submitted)

Shahrin, Sahib (2016) Sahur On The Road. [NC Speech] (Submitted)

Shahrin, Sahib (2016) Siri Program Coaching NLP Untuk Pemimpin Masyarakat Di Negeri Melaka. [NC Speech] (Submitted)

Shahrin, Sahib (2016) UTeM Career Connect@Ind-E-Zone Launch Ceremony. [NC Speech] (Submitted)

Shaidan, Muhammad Syahir (2016) Unsupervised Learning : K-Means Approach In Classifying Human Walking Path. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Shaidun, Muhamad Akmal (2016) Investigation On Turbine Blade's Profile Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaik Ismail, Shaikh Uqhaili Ash-Qhalani (2016) Design And Development Of Road Paint Robot Using GPS Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shair, Ezreen Farina and Abdullah, Abdul Rahim and Tengku Zawawi , Tengku Nor Shuhada and Ahmad, S.A and Mohamad Saleh, Saleha (2016) Auto-Segmentation Analysis Of EMG Signal For Lifting Muscle Contraction Activities. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 17-21. ISSN 2180-1843

Shairi, Noor Azwan and Zakaria, Zahriladha and Zobilah, Abdullah Mohammed Saghir and Ahmad, Badrul Hisham and Wong , Peng Wen (2016) Design Of SPDT Switch With Transmission Line Stub Resonator For WiMAX And LTE In 3.5 Ghz Band. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3198-3202. ISSN 1819-6608

Shamshiri, Meysam and Gan, Chin Kim and Omar, Rosli (2016) MV/LV Distribution Networks Modelling Based On Malaysian Power Network Context. Indian Journal of Science and Technology, 9 (48). pp. 1-8. ISSN 0974-5645

Shamsuddin, Mohamad Fakhri (2016) Development Of Baby Stroller Automation System Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsuddin, Muhammad Nasiruddin (2016) Physical And Mechanical Properties Of Natural Rubber Reinforced Carbon Black For Effect Of Tapioca Starch Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsuddin, Norsuriana (2016) Modelling And Forecasting The Electricity Demand In Administration Building At Technology Campus UTeM By Using Statistical Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsudin, Shamsul Anuar and Rivai, Ahmad and Abdullah, Zulkeflee and Ismail, Mohammad Hazrin and Mohd Hanafi, Mohd Hafidzal and Karjanto, Juffrizal and Zawawi, Nur Juliana (2016) Design, Fabrication And Analysis Of A Novel Morphing Wing Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shamsul Akmar, Ab Aziz and Mohd Zaki, Nuawi and Mohd Jailani, Mohd Nor (2016) Development Of Noise And Vibration Exposure Monitoring System For Malaysian Army (MA) Three-Tonne Trucks. Jurnal Teknologi, 78 (6-10). pp. 9-15. ISSN 0127-9696

Shan, Sung Liew and Mohamed, Khalil-Hani and Syafeeza, Ahmad Radzi and Rabia, Bakhteri (2016) Gender Classification: A Convolutional Neural Network Approach. Turkish Journal Of Electrical Engineering and Computer Sciences, 24 (3). pp. 1248-1264. ISSN 1300-0632

Shapheri, Nizar Zacariyya (2016) Tower Base Station Safety System Using GSM Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharatul Izah, Samsudin (2016) Nonlinear Proportional Integral Controller With Adaptive Interaction Algorithm For Nonlinear Activated Sludge Process. PhD thesis, Universiti Teknikal Malaysia Melaka.

Sharifah Sakinah, Syed Ahmad and Pedrycz, Witold (2016) The Development Of Granular Rule-Based Systems: A Study In Structural Model Compression. Granular Computing. pp. 1-12. ISSN 2364-4966

Sharifah Yuslinda, Syed Hussien and Rozaimi, Ghazali and Hazriq Izzuan, Jaafar and Chong, Chee Soon (2016) Robustness Analysis For PID Controller Optimized Using PFPSO For Underactuated Gantry Crane System. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 520-525. ISSN 978-147998252-3

Sharin, Ab Ghani (2016) Dielectric Strength Improvement Of Natural Ester Insulation Oil:Optimization Of Mixed Antioxidants Via Two-Level Factorial Design. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 12798-12803. ISSN 1819-6608

Sharin , Ab Ghani (2016) A Study Of Moisture Effects On The Breakdown Voltage And Spectral Characteristics Of Mineral And Palm Oil-Based Insulation Oils. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 1-10. ISSN 1819-6608

Sharuddin, Muhammad Syadza (2016) Thermal Energy Harvesting For Electronic Devices Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shkarah, Ahmed Jassim (2016) Single Phase And Two Phase Flow For Heat Transfer In Micro Channel Heat Sink. PhD thesis, Universiti Teknikal Malaysia Melaka.

Shuhaimi, Nur Amira (2016) Optimization Of Drilling Parameters On Surface Roughness In Dry Drilling Process Of AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shuib, Siti Sarah (2016) The Success Factors Of The Nascent Entrepreneurs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siah, Jia Wen (2016) Self-Service Interactive Kiosk System In Shopping Mall : Small In Size, Big Contribution To Customer Loyalty. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sidek, Safiah and Kudus, Norliah and Izharrudin, Siti Zakiah and Kamalrudin, Massila and Abu Hassan, Mahadi and Mohamed , Shahrulanuar (2016) Factors Influencing Internet Addiction Among University Students: A Review. Science International (Lahore), 28 (2). pp. 1343-1346. ISSN 1013-5316

Sidek, Siti Nurfarhana (2016) Optimization Of Drilling Parameter On Surface Roughness In Wet Drilling Process AISI D2 Tool Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Silvernathan, Kogeelan (2016) The Retailers Acceptance Towards Near Field Communication Mobile Wallet Technology In Malacca Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sim, Gui Wei (2016) The Effect Of Total Quality Management Practices Towards Enhancing The Organizational Performance A Study Of Muda Paper Converting (MPC) Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Singaravelu, Karthigeyan (2016) Investigation On Indoor Environmental Quality Of Teaching Laboratory. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Adlina, Md Ali and Maisarah, Abu and Hasnizom, Hassan (2016) Dipole Antenna Backed By 8-CBU AMC-EBG And 8-CBU FSS At 5.8 GHz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 107-114. ISSN 2180-1843

Siti Amirah , Mohd Padli (2016) Speed Control Of Pneumatic Cylinder Using On/Off Valve And PWM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Azura, Ahmad Tarusan and Yusnida, Ahmad Tarmizi and Auzani, Jidin and Kasrul, Abdul Karim and Huzainirah, Ismail and R., Sundram and Muhd Khairi, Abd Rahim (2016) Constant Switching Frequency For Direct Torque Control Of Induction Motor. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 228-233. ISSN 978-146739572-4

Siti Fairuz, Abdullah and Ahmad Fadzli Nizam, Abdul Rahman and Zuraida, Abal Abas and Wira Hidayat, Mohd Saad (2016) Multilayer Perceptron Neural Network In Classifying Gender Using Fingerprint Global Level Features. Indian Journal Of Science And Technology (INDJST), 9 (9). pp. 1-6. ISSN 0974-6846

Siti Fatimah, Sulaiman and Mohd Fua’ad, Rahmat and Ahmad Athif, Mohd Faudzi and Khairuddin, Osman (2016) Linear And Nonlinear Arx Model For Intelligent Pneumatic Actuator Systems. Jurnal Teknologi, 78 (6). pp. 21-28. ISSN 0127-9696

Siti Halma, Johari and Khairul Azha, A. Aziz and Suziana, Ahmad and Khalil Azha, Mohd Annuar and Mahidzal, Dahari (2016) Model Based Controller And Observer For Boost Converter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 31-36. ISSN 978-147998598-2

Siti Nurliza, Mohamad (2016) Expert System Of Maintenance Problems For Square Foiling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivakumar, Dhar Malingam (2016) ECO-HYBRID COMPOSITE FAILURE BEHAVIOR OF TWO SERIAL BOLTED JOINT HOLES. Journal of Engineering and Technology, 7 (1). pp. 114-124. ISSN 2180-3811

Sivakumar, Dhar Malingam and Muhd Ridzuan , Mansor (2016) Selection of natural fibre reinforced composites using fuzzy VIKOR for car front hood. International Journal of Materials And Product Technology, 53 (3/4). pp. 267-285. ISSN 0268-1900

Sivakumar, Dhar Malingam and Muhd Ridzuan , Mansor (2016) Thermoplastic matrix selection based on entropy method for importance weight of criteria. In: MERD 15, none, UTeM.

Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and Tan, CheeFai (2016) Failure analysis of two serial holes bolted joint hybrid composite. In: MERD 2016, none, UTeM.

Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and Tan, CheeFai (2016) Failure analysis on hybrid fiber reinforced plastics for bolted joint under geometric parameters effect. In: MERD 15, none, UTeM.

Sivapragasam, Thiliban (2016) Design Of Automatic Loading And Unloading Of Workpiece System For HAAS CNC Milling Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian and Sivakumar, Dhar Malingam (2016) Performance Evaluation of Reworked Weld Joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X

Soh, Tiak Chuan (2016) Improvement On Tear Resistance Of Rubber Moulded Mat By Varying Filler And Accelerator Contents. PhD thesis, Universiti Teknikal Malaysia Melaka.

Solahuddin, Nur Syafiqah (2016) Voice Activated Home System For Paralyzed People. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soo, Jia Hui (2016) Online Job Search Among Millennial : The Case Of Malaysian Technical University (MTUN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soon, Allan Chan Roong and Chong, Shin Horng (2016) Laboratory-Scale Single Axis Solar Tracking System: Design And Implementation. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (1). pp. 254-264. ISSN 2088-8694

Soon, Allan Chan Roong and Chong, Shin Horng and Said, Mohamed Azmi (2016) 2-DOF Lead-Plus-PI Control Approach For Magnetic Levitation System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (11). pp. 35-40. ISSN 2180-1843

Soon, Wei Jun (2016) Object Recognition Using Bows Model. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Soosay, Claudine and Nunes, Breno and John Bennett, David and Sohal, Amrik and Juhaini, Jabar and Winroth, Mats (2016) Strategies For Sustaining Manufacturing Competitiveness: Comparative Case Studies In Australia And Sweden. Journal Of Manufacturing Technology Management, 27 (1). pp. 6-37. ISSN 1741-038X

Su, Zhi Qian (2016) Determination Of Tensile Properties Of Topologically Optimized FDM For End-Used Part. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suberi, Hanis Amira (2016) Effect Of Surfactant On The Surface Integrity Of Stainless Steel Using EDM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramaniam, Shathis Kumar (2016) Intelligent Image Capturing Alarm System To Protect Your Locker Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Subramonian, Sivarao and Ali, Aidy and Amran, Mohammad and Dhar malingam, Sivakumar and Salleh, Mohd Shukor (2016) Effect Of Fiber Loading On The Mechanical Properties Of Bagasse Fiber–Reinforced Polypropylene Composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Subramonian, Sivarao and Ali, Aidy and Amran, Mohammad and Dhar malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect Of Fiber Loading On The Mechanical Properties Of Bagasse Fiber–Reinforced Polypropylene Composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Subramonian, Sivarao and Ali, Aidy and Md Ali, Mohd Amran and Dhar malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance Evaluation Of Reworked Weld Joints. International Journal Of Engineering And Technologies, 9 (-). pp. 5-12. ISSN 2297-623X

Suhaizam, Muhammad Azrul Syafiq (2016) Development Of Smart Parking Lot System Using Laser Communication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhana, Mohamed and Norsuridah, Shahdon and Rohana, Sham and Nooririnah, Omar and Aznilinda, Zainuddin and Raja Zuraidah, Raja Mohd Rasi (2016) A Case Study On Factors Influencing Credit Card Usage. Journal Of Applied Environmental And Biological Sciences, 6. pp. 38-42. ISSN 2090-4274

Sulaiman, Farina (2016) Torque Density Improvement Of Spoke Type BLDC Motor Using Hollow Rotor Topology. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sulaiman, Mohd Affendy (2016) Investigating Factors Influencing UTeM Undergraduate Students' Satisfaction On U-Learn E-Learning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Nur Hidayah (2016) Performance Of Different Mach-Zehnder Interferometer (MZI) Structures For Optical Modulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Saiful Naim and Abu Shah, Ismail and Halim, Mohd Faizal and Tamin, Mohd Nasir (2016) Design And Development Of Auto-Steel Draw Forming Test Device. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 10977-10981. ISSN 1819-6608

Sumaidy, Eliyana Sari (2016) Ergonomic Design Chair For Postpartum Mothers. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sundaraj, Kenneth and Sulaiman, Mohd Nazri and A. Qamarruddin, Fazilawati and Chee, Kiang Lam (2016) Virtual Phacoemulsification Surgical Simulation Using Visual Guidance And Performance Parameters As A Feasible Proficiency Assessment Tool. BMC Ophthalmology, 16. pp. 1-21. ISSN 1471-2415

Sundaraj, Kenneth and W. Samsudin, Wan Syahirah and Ahmad, Amirozi and Salleh, Hasriah (2016) Initial Assessment Of Facial Nerve Paralysis Based On Motion Analysis Using An Optical Flow Method. Technology And Health Care, 24. pp. 287-294. ISSN 0928-7329

Sundaraj, Kenneth and Ahamed, Nizam Uddin and Alqahtani, Mahdi and Altwijri, Omar and Rahman, Matiur (2016) Age-Related EMG Responses Of The Biceps Brachii Muscle Of Young Adults. Biomedical Research, 27. pp. 787-793. ISSN 0970-938X

Sundram, Ramahlingam and Auzani, Jidin and Atikah, Razi and Muhd Khairi, Abd Rahim and Huzainirah, Ismail and Yusnida, Ahmad Tarmizi and Logan Raj, Lourdes Victor Raj (2016) Improve Torque Control Performance Of 3-Phase DTC Constant Switching Method Using Optimal PI Parameter Tuning Strategy. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 577-582. ISSN 978-146739572-4

Sundram, Ramahlingam and Auzani, Jidin and Azrita, Alias and Logan Raj, Lourdes Victor Raj and Atikah, Razi (2016) Improved Torque Control Performances Using Torque Error Modulator For Multilevel Inverter Based DTC Induction Motors. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 1-6. ISSN 978-147998598-2

Sundram, Ramahlingam and Auzani, Jidin and Tole, Sutikno (2016) A Novel Optimal PI Parameter Tuning Strategy To Improve Constant Switching Performance Of Direct Torque Control. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 422-430. ISSN 2088-8694

Suziana, Ahmad and Siti Halma, Johari and Mohd Firdaus, Mohd Ab Halim and Arfah, Ahmad (2016) Grid Connected Multilevel Inverters For PV Application. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 181-186. ISSN 978-147998598-2

Sy Kamaruzzaman, Syarifah Noratiqah (2016) Factor Influencing Consumer Perception And Purchase Intention On Green Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syafeeza, Ahmad Radzi and Kwan, Lik Hou and Syazana Itqan, Khalid and Norihan, Abdul Hamid and Wira Hidayat, Mohd Saad and Zahariah, Manap (2016) A Low Cost Finger-Vein Capturing Device. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3330-3335. ISSN 1819-6608

Syafeeza, Ahmad Radzi and Mohamed, Khalil-Hani and Rabia, Bakhteri (2016) Finger-Vein Biometric Identification Using Convolutional Neural Network. Turkish Journal Of Electrical Engineering and Computer Sciences, 24 (3). pp. 1863-1878. ISSN 1300-0632

Syafrizon, Hafzan (2016) Assessment Of Environmental Noise Pollution From Ayer Keroh Industrial Estate Melaka Using Statistical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahrial, Fadhli (2016) Hydrogen Energy Production From Biomass-Derived Polysaccharides Using Radio Frequency In-Liquid Plasma. PhD thesis, Universiti Teknikal Malaysia Melaka.

Syahriful, Rizky Sultansyah (2016) Study On Corrosion Rate Of The Zinc Anode From Outboard Boat Engine Around Straits Of Malacca. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syariffah, Othman and Mohd Ruddin, Ab Ghani and Mohamad Rom, Tamjis (2016) Improvement Of Energy Collection In A Solar System. International Journal of Applied Engineering Research, 11 (14). pp. 8136-8139. ISSN 0973-4562

Syarulnaziah, Anawar and Saadiah, Yahya and Zakiah, Ayop and Andita Suci, Pratiwi (2016) Progress-Based Strategy For User Engagement In mHealth Participatory Sensing. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6309-6314. ISSN 1819-6608

Syazana Itqan, Khalid and Syafeeza, Ahmad Radzi and Gong, Fook Guan and Nur Badariah Ahmad, Mustafa and Wong, Yan Chiew and M. M., Ibrahim (2016) User Identification System Based On Finger-Vein Patterns Using Convolutional Neural Network. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3316-3319. ISSN 1819-6608

Syazana Itqan, Khalid and Syafeeza, Ahmad Radzi and Norhashimah, Mohd Saad (2016) A MATLAB-Based Convolutional Neural Network Approach For Face Recognition System. Journal Of Bioinformatics And Proteomics Review, 2 (1). pp. 1-5. ISSN 2381-0793

T

Taher, Mohd Fahmi and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Mohd Aras, Mohd Shahrieel and Azahar, Arman Hadi and Zainal Abidin, Amar Faiz (2016) Development of Autonomous Sweeper Robot for Badminton Court. Journal of telecommunication, electronic and computer engineering . pp. 129-133. ISSN 2180-1843

Tahir, Eliza Suraiya (2016) Performance Evaluation Of Throughput And Packet Loss In Different Routing Protocol On Manet Scenarios. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tahir, Nur Hazwani (2016) Processing And Characterization Of Polycaprolactone (PCL) : Sago Starch Blends As Biodegradable Polymers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tai, Weng Hao (2016) Cross Wind Detection For Direction And Speed Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tai, Wooi Ling (2016) GNU Radio Beacon Receiver For Ionospheric Study. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tajul Arus, Muhammad Syazwan (2016) Examining The Relationship Between The Maintenance Machine Downtime And Firms's Production Yield: The Case Of Manufacturing Companies In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tam, Yau Yin (2016) Modelling Overall Equipment Effectiveness Improvement With Overall Production Cost. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tamby Suleiman, Nurusshahidah (2016) Waste Reduction By Implementing Kaizen Activities In Textile Manufacturing Company. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Chee Nian (2016) Design And Analysis Of Human Powered Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Cheer Shen (2016) EEG-based Brain Computer Interface for Smart Home Control Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chia Hwa (2016) Performance Analysis Of Different Blade Design For Waste Kinematic Energy Recovery System (WKERS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Chuan Chien (2016) Factor Affect The Purchasing Intentions Of UTeM's FPTT Undergraduates Toward Dietary Supplements Consumption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Geok Seong (2016) Control Of Temperature Process Using PID Controller Tuned Using Optimization Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Hung Chang (2016) Hand Gestures Controlled In Augmented Reality By Using Oculus Rift And Leap Motion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kai Loon (2016) Development Of Monitoring System For A Small Scale Energy Harvester For Domestic Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kai Yih (2016) Development Of Room Temperature Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Khai Ying (2016) Simulation-Based Man-Machine Ratio Using Arena Simulation Software To Analyse Personnel Capacity Requirement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kian Heong (2016) Non-sticking on ground ring improvement for copper wire bonding with DMAIC approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Lee Ping (2016) DMAIC Approach To Reduce Total Duration Of Prototyping Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Leik Ho (2016) Session Based Activity Monitoring Application For Android. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Lorinna Mei Hua (2016) Development Of Cage Automatic Technology System (CATS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Ming Hui (2016) Enhanced-PID Control Based Antagonistic Control For Pneumatic Artificial Muscle Actuators. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Pei Chee (2016) Design And Development Of An RF Power Harvester Operating In Subthreshold For Body Area Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Pi Hua (2016) Design And Performance Evaluation Of Solar PV System In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Ping Khai (2016) Controller Design of Dual-limb Robotic Arm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Sze Ying (2016) Development Of Portable Air Conditioning Using Peltier Effect For Small Area Uses. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Terence Kah Haw (2016) The Influencing Factors Of Technology Adoption That Could Enhance Manufacturing Processes In Paper Mill Company : A Case Study Of Yeoung Chaur Shing Paper Mill Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Tian Seng (2016) The Determinants Of Green Purchase Intention Of Green Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wan Teng (2016) Critical Success Factors For Successful Software Development Project. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Wee Kien (2016) Lean Adoption For Effective Machine's Maintenance Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Wen Hong (2016) The Study Of Seating Pressure On National Car (Proton And Perodua). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Daphne Hui Zyen (2016) Novel Framework For Automated Appliance Registration In Home Energy Management Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tang, Kah Chun (2016) Development Of A 3-Axis Articulated Type Robot Arm With A Mobile PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Soon Heng (2016) Flow Process Measurement And Control Using PID Control Scheme. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tang, Teng Fong and Chong, Shin Horng and Tan, Ming Hui and Chan, Chun Yuan and Sato, Kaiji (2016) Characterization Of Pneumatic Artificial Muscle System In An Opposing Pair Configuration. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 73-77. ISSN 2180-1843

Tarmeze @ Ghazali, Ahmad Afiq (2016) Study Of Accuracy Of Molar Teeth Prototype Produced By Powder And Liquid Base Layer Manufacturing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, Afirah and Syed Ahmad, Sharifah Sakinah and Ahmad, Asmala (2016) Classification Of Landsat 8 Satellite Data Using NDVI Thresholds. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 37-40. ISSN 2180-1843

Tawfeeq, Omar Munaf (2016) Measuring The Effectiveness Of Project Management Information System In The Decision Making Case Study In PEW Group. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tay, Joevine Wei Xian (2016) Development Of Item Tracking System For Asset Registration Using UHF RFID With Cloud Data Storage And Online Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Te, Jie Shen (2016) A Study On The Factors Which Will Affect Consumer Buying Behaviour Towards Healthcare Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tea, Ann Wen (2016) Factors Affecting The Company Using Green Marketing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Kok Chen (2016) Structural Characterization Of Tungsten Sulphoselenide (Wsse) Thin Films For Semiconductor Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Siau Ping (2016) Experimental Investigation Of The Motion Characteristics Of A Passive Quarter Car Suspension. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Tee, Siau Ping and Md Ghazaly, Mariam and Tan, Ping Khai and Chong, Shin Horng and Che Amran, Aliza and Jamaluddin, Muhammad Herman and Mohd Aras, Mohd Shahrieel (2016) Tracking Control Performances Of A Dual-Limb Robotic Arm System. International Journal of Mechanical and Mechatronics Engineering, 16 (5). pp. 48-53. ISSN 2077-124X

Tee, Song Chiew (2016) Development Of Microcontroller Based Automated Food Handling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Wei Hown (2016) Electromyography (EMG) Signal Analysis For Manual Lifting In Industrial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Wei Sen (2016) Robotic Arm Controller Design For Capturing The Sequential Images Surrounding The Object. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Zhen Wei (2016) Dry Sliding Wear And Friction Behavior Of Silicon Carbide And Multi Wall Carbon Nanotubes Reinforced Magnesium Matrix Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tengku Jalil, Tengku Nur Amirah (2016) Design And Analysis Of Safest Geo Satellite Launching And Tracking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Marzuki, Tengku Nur Nadia (2016) Development Of Prototype Motor Controller For Buggy To Control Direction And Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tengku Zawawi , Tengku Nor Shuhada (2016) Electromyography (EMG) Signal Analysis For Manual lifting Using Time-Frequency Distribution. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tengku Zawawi , Tengku Nor Shuhada and Abdullah, Abdul Rahim and Halim, Isa and Shair, Ezreen Farina and Mohamad Saleh, Saleha (2016) Application Of Spectrogram In Analysing Electromyography (EMG) Signals Of Manual Lifting. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 3603-3609. ISSN 1819-6608

Tengku Zawawi , Tengku Nor Shuhada and Abdullah, Abdul Rahim and Shair, Ezreen Farina and Mohamad Saleh, Saleha (2016) Performances Comparison Of EMG Signal Analysis For Manual Lifting Using Spectrogram. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 29-34. ISSN 2180-1843

Teo, Chee Huat (2016) Development Of Double Stage Filter (DSF) On Stereo Matching Algorithm For 3D Computer Vision Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teo, Felix Soon Heng (2016) Design And Development Of Home Energy Monitoring System Using PIC For Energy Consumption Awareness. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teoh, Qian Rou (2016) Commercialization Factors And Business Performance : A Case Of Bio Greeno Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tew, Huei Theng (2016) Preparation And Charaterization Of Kenaf Fiber Reinforced MWCNTS-EPOXY Multi-Scale Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tey, Sock Chien (2016) Influence Of Gold Silver Plating Thickness On Palladium Coated Copper Wire On Stitch Bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Thailis Bounya, Ngelayang and Low, Yin Fen and Rhonira, Latif and Burhanuddin Yeop, Majlis (2016) The Evolution Of Research And Development On Cochlear Biomodel. Jurnal Teknologi, 78 (6-8). pp. 83-92. ISSN 0127-9696

Tham, Wen Ying (2016) The Relationship Between Human Resource Development, Personality And Intrapreneurial Competencies : Case Study Of Manufacturing Companies. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thangarajoo, Rhamanar (2016) Perception Of The Public Towards The Impact Of Hybrid Car In Malacca, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tharuma Rethinam, Nishanti (2016) Development Of Fibre Optic Sensor For pH Level Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Thavan, Lingeshpari Vasu (2016) Industrial Case Study On The Effect Of Particle Size On Warpage Of Alumina Substrate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiew, Wei Jia (2016) Arduino Based Automatic Plant Watering System Using Soil Moisture Sensor For Botanical Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ting, Mei Kwan (2016) Factors That Influencing Consumers' Purchase Intention Towards Eco-Friendly Consumer Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ting, Yong Jian (2016) Design And Development Of Hybrid Power Generation Model Using Wind And Solar Energy For Residential Building. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tiong, Xiang Kai (2016) Design Of Wireless Industrial Robotic Arm And Control Using Android Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Toh, Cheng Chuan and Abdul Majid, Darsono and Mohd Shakir, Md Saat and Azmi, Awang Md Isa and Norlezah, Hashim (2016) Blind Source Separation On Biomedical Field By Using Nonnegative Matrix Factorization. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8200-8206. ISSN 1819-6608

Tong, Chee Kiet (2016) Design And Simulation Studies Of 3-Axis Articulated Robotic Arm With PID Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Abd Khalil, Tuan Nur Hanim Najwa (2016) The Effect Of Intrinsic And Extrinsic Factors To The Cooling Load Calculations In The Controlled Conditioned Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Zakaria, Tuan Nurul Husna (2016) Development Of Remote Terminal Unit For Distribution Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

UTeM, - (2016) Library Day Pada 02-04 Mac 2016 Di Perpustakaan Universiti Teknikal Malaysia Melaka. [Image] (Submitted)

Uma Mageswary, K.Munusamy (2016) Design And Development Of Linux-Based Finger-Vein Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ummi Raba'ah, Hashim and Siti Zaiton, Mohd Hashim and Azah Kamilah, Muda (2016) Performance Evaluation Of Multivariate Texture Descriptor For Classification Of Timber Defect. Optik, 127 (15). pp. 6071-6080. ISSN 0030-4026

V

Valeriano, Ronald (2016) Optimization Of Car Front Suspension For Dynamic Performance In Virtual Formula. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Van, Tze Jing (2016) Determinants Of CSR Disclosure : A Study On The Listed FMCG Companies In Bursa Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vathivellu, Yogavinoothon (2016) Injection Moulding Protection System Controller. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Veljierson, Moses (2016) Addition Of Molybdenum Dithiophosphate (MoDTP) Into Zinc Diamyldithiocarbamate (ZDDC) Induced Corn Oil As Bio-Based Lubricant Substitution. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Vengadeson, Mathialagan (2016) Petri Net Controller Design For Robotic Pick And Place System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Vengadeson, Mathialagan (2016) Petri Net Controller Design For Robotic Pick And Place System. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Verak, Saleekit (2016) An Io-T Based Home Appliance Automation System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Veryson, Kohiya (2016) Development A Dented Defect Detection On Cylindrical Type Battery Via Vision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Victor Raj, Logan Raj Lourdes (2016) High Performance Of Direct Torque Control For Five Phase Induction Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Vinodh, Annathurai and Gan, Chin Kim and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) Shading Analysis For The Siting Of Solar Pv Power Plant. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5021-5027. ISSN 1819-6608

Voon, Michelle Xin Ying (2016) Effectiveness Of Cloud Computing In UTeM City Campus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

W. Mohamad, Wan Amirul Safwan (2016) Optimization Of Stacking Sequence And Ply Thickness For Composite Of Aerospace Using Design Of Experiment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wagiman, Mohammad Ikhwan Shah (2016) Development Of Power Generator Monitoring Using Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wahab, Nur Suhaida (2016) Development Of Intelligent Pigeon Hole Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Amirah, W Azlan and Liew, Siaw Hong and Choo, Yun Huoy and Hazli, Zakaria and Low, Yin Fen (2016) Wavelet Feature Extraction And J48 Decision Tree Classification Of Auditory Late Response (ALR) Elicited By Transcranial Magnetic Stimulation. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6319-6323. ISSN 1819-6608

Wan Azhari, Wan Noor Azrina (2016) Effect Of Injection Moulding Parameters On The Shrinkage Using Taguchi Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Dir, Wan Nurfarhana (2016) Identify The Succession Factors That Enhances The Family Business Performance In Selangor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Ismail, Wan Syarma Adila (2016) Implementation Of Quality Method To Improve Procedure In Handling Quality Issue At SME Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Razali, Wan Hamiduddin (2016) Development Of Geo-Location Using Object Oriented Technique For Smart Parking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Azman, Wan Ainul Syafika (2016) Study And Analysis Physiognomic Toward The Product Design (Kansei Engineering). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Norhisyam, Abd Radhis and Elmy Johana, Mohamad and Ruzairi, Abdul Rahim and Jaafar, Abdullah and Hanis Liyana, Mohmad Ameran (2016) Electrical Capacitance Tomography: A Review On Portable ECT System And Hardware Design. Sensor Review, 36 (1). pp. 64-70. ISSN 0260-2288

Wan Sulong, Wan Zaharah (2016) Effectiveness Of Innovation Entrepreneurship Training Program In Developing Young Entrepreneur Among Universiti Teknikal Malaysia Melaka (UTeM) Students. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Yaacob, Wan Nur Hidayah (2016) An Analysis And Measurement For The Customer Design Preferences. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wee, Bee Ying (2016) Vehicle Theft Intimation Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wee, Loon Lim and Antoni, Wibowo and Mohammad Ishak, Desa and Habibollah, Haron (2016) A Biogeography-Based Optimization Algorithm Hybridized With Tabu Search For The Quadratic Assignment Problem. Computational Intelligence and Neuroscience, 2016. pp. 1-12. ISSN 1687-5265

Win Adiyansyah, Indra and Nurulhalim, Hassim (2016) Real-Time Microwave Moisture Measurement Of Nickel Ore In Conveyor Applications. Jurnal Teknologi, 78 (6). pp. 111-115. ISSN 0127-9696

Wo, Angeline Weng Wei (2016) Production And Characterization Of Fibrillated Nanocellulose Fiber Derived From Spent Tea Leaves. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Foo Yong (2016) The Study Of Critical Factor That Affect The Efficiency Of Kanban System In Production Line: A Study Of Paper Mill Industrial. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Gao Jie (2016) Quality Checking And Inspection Using Machine Vision Technique. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Wong, Hwah Jhong (2016) In-Vehicle Carbon Monoxide Detection With Auto Window Roll Down. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Michael Loke Peng (2016) Design And Analysis Of Electrical Testing Probe For Semiconductor Integrated Circuit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Shao Pei (2016) Advance Swift Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Shi Yuan (2016) Entrepreneurial Competencies And Sustainability Of Homestay Entrepreneurship In Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Sue Tean (2016) E-Commerce Adoption Among Retailing SMEs Malaysia In Perspective Of Technological Organizational Environmental (TOE) Framework. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Wei Jian (2016) Miniaturized Fractal Patch Antenna For Wireless Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Wei Qing (2016) Railway Crack Detection System Using Ultrasonic Sensors And Arduino UNO. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Yan Chiew (2016) Adaptive Impedance Tuning Network Using Genetic Algorithm: ITUNEGA. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8. pp. 55-60. ISSN 2289-8131

Wong, Yan Chiew and Mahmod , Mazlina and Ahmad Radzi, Syafeeza and Abdul Hamid, Norihan (2016) Adaptive Boundary Impedance Matching Network Algorithm For Multi Frequency Standards RF Front-End. International Journal Of Electronics And Communications, 70 (10). pp. 1449-1456. ISSN 1434-8411

Wong, Yan Chiew and Mahmood, Mohd Najid and Mat Ibrahim, Masrullizam and Ahmad Radzi, Syafeeza and Hamid, Nor Nadiah Abdul (2016) Adaptive Impedance Tuning Network Using Genetic Algorithm : ITuneGA. Journal Of Telecommunication Electronic And Computer Engineering, 8 (5). pp. 55-60. ISSN 2180 – 1843

Wong, Yan Chiew and Tan, Pei Chee and Mat Ibrahim, Masrullizam and Ahmad Radzi, Syafeeza and Abdul Hamid, Norihan (2016) Dickson Charge Pump Rectifier Using Ultra-Low Power (ULP) Diode For Ban Applications. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (9). pp. 77-82. ISSN 2180-1843

Wong, Yung Cheng (2016) Analysis Of Sound Absorption Properties Of Spent Tea Leaves-Polypropylene Composites. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Zhe Ming (2016) Design And Construction Of A Simple Bipedal Robot With Obstacle Avoidance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Woon, Chun Yaw (2016) Design Of Embedded Pneumatic Controller With Proportional Valve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

X

Xiou Ying, Choong (2016) Interactive Campus E-Platform And Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Y

Yaakop, Sharul Nizam (2016) The Design Of Radiant Cooling Systems On Building Prototype Using Copper Tubes Installation As Radiant Hydronic Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yaapar, Siti Nadirah (2016) The Risk Perceptions To Online Purchase Intentions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yacob, Mohammad Nazryen (2016) Kids Screen Timer With Arduino. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya, Aina Najwa (2016) Android Password Based Remote Door Opener System For Auto Gate. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya, Nurulashikin (2016) Technology Impact Performance Of Employee In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya, Siti Mahfuzah (2016) A New Investigation Method Of Power Quality Behavior And Improve By Using Low Single Phase Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yahaya , Nur Yuzatul Aqilah (2016) The Effect Of Strain Rates On The Fracture Behaviour Of Biocomposites. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Yahya, Nur Idayu Akma (2016) Technology Acceptance Of Online Systems Among Human Resource Personnel In Oil And Gas Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yaman, Muhammad Firdaus (2016) Study On The Effect Of Hole Shape And Geometry Of Absorptive Silencer On The Sound Transmission Loss Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Kiat Bin (2016) Development Of New Bio-Lubricant Using Blended ZDDC And ZDDP As Tribological Properties Improver In Palm Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Sin Yin (2016) Effect Of Thermoplastic Mesh Incorporation On The Mechanical And Physical Properties Of Fibre Reinforced Laminate Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Vincent Kinn Sheng (2016) Development And Analysis Of Head Tracking System For Robotic Wheelchair Control. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Yapp, Keay Kai Yi (2016) Green Architecture For Transforming Malacca Tourism Building : A Case Study At Mini Malaysia And Asean Cultural Park. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeap, Hong Kheng (2016) Mechanical And Physical Analysis On The Effect Of Commercial Aluminium Mesh In Fibre Reinforced Laminate Structures. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yee, Hui Woon (2016) Determinant And Barrier Of Market Orientation Toward Organization Performance In Food Industry Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeo, Chin Kiat (2016) Development Of A Point-To-Point (PTP) Positioning Controller For A Robotic Hand. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeo, Kian Hong (2016) Effect Of Epoxy Nozzle Separation On Die Attach Adhesion At Chip Substrate Interface. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yeoh, Eik Keong (2016) Remotely Amphibian Vehicle. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Yew, Woi Mei (2016) Factors Affecting Consumers Adoption Of Electronic Word-Of-Mouth (eWOM) In Penang, Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yogan, Jaya Kumar and Goh, Ong Sing and Halizah, Basiron and Ngo, Hea Choon and Puspalata, C Suppiah (2016) A Review On Automatic Text Summarization Approaches. Journal Of Computer Science, 12 (4). pp. 178-190. ISSN 1549-3636

Yong, Jason Chung Hsien (2016) iBeacon-Integrated Indoor Emergency Route Navigation System In Healthcare Industry. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Yong, Kai Fang (2016) Experimental Investigation Of Friction And Wear Characteristic On Natural Oil-Based Lubricants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Min Fung (2016) Developing A Fall Detection Algorithm For Elderly By Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong, Vooi Ting (2016) The Influence Of Packaging Attributes On Consumer Buying Decision For Beauty And Health Care Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yoong, Sai Sieng (2016) Process Parameter Relationship Of Stainless Steel To Carbon Steel Pipes Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yunos , Siti Nordiana (2016) Control Strategy Of Series Active Power Filter For Voltage Disturbances In Electrical Distribution System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Yunus, Ahmad Rozelan and Aris, Amir (2016) Eksplorasi potensi kendiri melalui ujian personaliti. Manual. Penerbit UTeM.

Yunus, Ahmad Rozelan and Aris, Amir (2016) KENDIRI ASERTIF. Manual. Penerbit UTeM.

Yunus, Izzah Yuhanees (2016) Factors Affecting Social Entrepreneurship To Revitalize The SME Food Manufacturers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusnida, Ahmad Tarmizi and Auzani, Jidin and Kasrul, Abdul Karim and Siti Azura, Ahmad Tarusan and Muhd Khairi, Abd Rahim and Sundram, Ramahlingam and Huzainirah, Ismail (2016) Investigation Of Torque And Flux-Current Producing Components In Indirect Rotor Flux Oriented Control (IRFOC) Of Induction Machines. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 539-544. ISSN 978-146739572-4

Yusof, Lily Syafiqah (2016) Correlation Of Biomechanical Properties Of Articular Cartilage Based On Magnetic Resonance Imaging (MRI) Image. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusoff, Naszeri (2016) Development Of Object Tracking Architecture Based On Optical Flow Vector For Autonomous Motion Detection System. Project Report. UTeM, Melaka, Malaysia . (Submitted)

Yusoff, Nurul Ashikin (2016) Design And Analysis Of Drone Control Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusop, Azlan (2016) Design And Develop High Speed Steel Flying Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yusop, Yusmarnita and Md Saat, Mohd Shakir and Sing, Kiong Nguang and Husin, Siti Huzaimah and Abd Ghani, Zamre (2016) Design Of Capacitive Power Transfer Using A Class-E Resonant Inverter. Journal Of Power Electronics (JPE), 16 (5). pp. 1678-1688. ISSN 1598-2092

Yusri, I and Md Ghazaly, Mariam and Rahmat, Mohd Fua'ad and Chong, Shin Horng and Ranom, Rahifa and Abdullah, Zulkeflee (2016) Effects Of Varying Arc Angles And Poles Numbers On Force Characteristics Of Switched Reluctance (SR) Actuator. International Journal of Mechanical and Mechatronics Engineering, 16 (5). pp. 41-47. ISSN 2077-124X

Yusri, Izzati and Md Ghazaly, Mariam and Ali Al-Andoli, Esmail Ali and Rahmat, Mohd Fua'ad and Zulkeflee, Abdullah and Md Ali, Mohd Amran and Ranom, Rahifa (2016) Optimization Of The Force Characteristic Of Rotary Motion Type Of Electromagnetic Actuator Based On Finite Element Analysis. Jurnal Teknologi , 78 (9). pp. 13-20. ISSN 2180-3722

Yusri, Muhammad Ihsan (2016) Investigation On Social Media Adoption Among The Food Truck Vendors In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Z

Zabide, Muhamad Aswad (2016) Control Strategy For Distributed Integration Of Photovoltaic And Battery Energy Storage System In Micro-Grid. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zahari, Amir Ahlami (2016) Effects Of Branch Pipe Diameter Ratio On Fluid Flow In Y- Junction Pipe For Dividing Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahari, Muhammad Nazaruddin (2016) Industrial Protection System Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaheera, Zainal Abidin (2016) Furrow And Crypt Detection Using Modified Ant Colony Optimization For Iris Recognition. PhD thesis, Universiti Teknikal Malaysia Melaka.

Zahri, Muhammad Zaki (2016) Development Of Portable Mini Thermoelectric Generator For Outdoor Activities And Emergency Situations By Using PCM-Cooled Thermoelectric Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zahriladha Zakaria (2016) A Device, A Method And A System For Detecting Properties Of A Material. PI 2016702297.

Zainal, Iktisyam and Mohd Shahrieel, Mohd Aras and Muhammad Nizam , Kamarudin and Harun, Mohamad Haniff and Mohd Khairi , Mohd Zambri and Alias , Khamis and Anuar , Mohamed Kassim (2016) Design Process and Hydrodynamic Analysis of Underwater Remotely Operated Crawler. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) . pp. 35-39. ISSN 2180-1843

Zainal, Muhammad Azim (2016) Prototype Development Of Self Asses Split Unit Air Conditioning System Maintenance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal, Nur Izzati (2016) Development Of Alcohol Detection In Vehicle With GSM Monitoring. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal, Salam and Mohd Zulkifli, Ramli and Jubaer, Ahmed (2016) Comparative Study Of Software And Hardware Solutions For Partial Shading In PV System. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 480-485. ISSN 978-147998598-2

Zainal Abdin, Nurul Farida (2016) Kindergarten Security System Using RFID And GSM System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abideen, Muhammad Danial (2016) Motion Tracking System Using Computer Vision With OpenCV Source Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Halimatul Zaharah (2016) Exploring Factors For Effective Social Entrepreneurship. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Abidin, Muhammad Zaimi and Azran, M.N and Khaizaki, M. and Alif, M. and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition in Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795

Zainal Abidin, Muhammad Zaimi and Azran, Mohd Nor and Muhamad, Khaizaki and M., Alifd and Abdul Aziz, Mohd Sanusi and Azam, Mohd Asyadi and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition In Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795

Zainal Abidin, Syazwani and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Md Isa, Mohamed Hafiz and Masripan, Nor Azmmi and Abdullah, Amirah (2016) Investigation of thermal characteristics of CNF-based nanofluids for electronic cooling applications. Journal of Mechanical Engineering and Sciences (JMES). 2336-2349. ISSN 2289-4659

Zainal Abidin, Zulfikri (2016) Development Of Algorithm To Integrate With Robotic Arm Using Nerve Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal Ariffin, Mohd Abdul Hai (2016) To Design A Smart Dustbin For Monitoring And Detecting Waste Level. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainintawa, Romi Hidayat (2016) Study Engine Performance And Exhaust Emission On Cooling System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainol, Nurzaimah (2016) Design Of High Gain Antenna With Harmonic Suppression Using T-Shape DGS And Spurline. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainol, Nurzaimah and Zakaria, Zahriladha and Abu, Maisarah and Mohamed Yunus, Mawarni (2016) A Circularly Polarized Harmonic-Rejecting Antenna At 2.45 Ghz For Wireless Power Transfer. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3143 - 3146. ISSN 1819-6608

Zainol, Nurzaimah and Zakaria, Zahriladha and Abu, Maisarah and Mohamed Yunus, Mawarni (2016) Harmonic Suppression Rectangular Patch Antenna With Circularly Polarized. TELKOMNIKA, Telecommunication, Computing, Electronics And Control, 14 (2). 471 - 477. ISSN 2302-9293

Zainuddin, Farah Ayiesya (2016) Meningkatkan Kecekapan Fotovoltaik Menggunakan Kombinasi - Termal. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainuddin, Hidayat and Ali, Mohd Basri and Muhammad Said, Nurlaela and Zakaria, Kamarul Ariffin (2016) Correlation Between Vertical Wheel Impact Energy With Lateral Wheel Impact Energy : A Finite Element Analysis Approach. International Journal of Automotive and Mechanical Engineering , 13 (3). pp. 3574-3583. ISSN 2229-8649

Zainudin, Eidil Harzeq (2016) The Challenges Of Technology Adoption In Oil And Gas Industry : The Case Study Of Solar Alert Sdn Bhd. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainudin, Mohd Alif Aiqbal (2016) Fabrication Of Electric Bicycle Disable Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Ahlam Afiqah (2016) Development Of Smart Care Application System For Pet By Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Ahmad Zikri (2016) Design And Analysis Of A Plastic Book Mark Injection Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Azma Niza Laila (2016) Energy Audit In Building : Tools To Improve Overall Energy Efficiency. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zakaria, Fazlinizam (2016) Design Of Ultimate Shield For Impact Resistant Purpose. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Kamaruddin (2016) Development Of Monitoring Device For HVAC Air Filter In Filter Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Ali, Mohd Basri (2016) Influence Of Elevated Temperature On The Fatigue Fracture Surface Hardness Of AA6061. Journal of Engineering and Applied Sciences, 11 (10). pp. 2130-2135. ISSN 1816-949X

Zakaria, Kamarul Ariffin and Jimit, Roy Hanson and Ramli , S.N.R. and Abdul Aziz, Azizuddin and Bapokutty, Omar and Ali, Mohd Basri (2016) Study On Fatigue Life And Fracture Behaviour Of Fibreglass Reinforced Composites. Journal of Mechanical Engineering and Sciences (JMES), 10 (3). pp. 2300-2310. ISSN 2289-4659

Zakaria, Muhamad Rozairi (2016) Modelling And Assessment Of Transformer Differential Protection In Power System Network Using PSCAD Software. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zakaria, Muhammad 'Izzat (2016) Incorperating Levy Flight Method On The Bees Algorithm With Pseudo-Gradient Towards Numerical Benchmark Test Functions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nor Hanita (2016) The Impact Of Internal And External Factors On Student Entrepreneurial Intention. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurnabilah (2016) Automatic Pet Feeder Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Farmira (2016) Design A Low Cost Table Fan Using DFMA Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nurul Hannan (2016) Heart Rate Monitoring System For Patients Using Android Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Nuur Farhana Shatilah (2016) The Impact Of User Interface Design Element For Doctor Satisfaction On Electronic Medical Record System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zakaria, Zahriladha and Zainuddin, N. A and Husain, Mohd Nor and Mutalib, M. A and Amilhajan, Ena and Abdullah, M. S. K. and Sam, Weng Yik (2016) Optimum Desgin Of Rectifying Circuit With Receiving Antenna For RF Energy Harvesting. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3300 - 3304. ISSN 1819-6608

Zakaria, Zailina (2016) The Effect Of Explicit Vocabulary Application (EVA) On Student's Achievement And Appeptance In Learning Explicit English Vocabulary. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zakaria, Zulziliana (2016) Physical Properties And Microstructures Of Alumina-Based Ceramics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria , Nurul Khairiah (2016) 5.8 Ghz Antenna For Health Monitoring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakariah, Nur Adilah (2016) Determination Of The Suitable Power Delivery Method Towards Compatible Line Loadability In Microgrid Using Powerworld Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakariah, Nur Syahirah (2016) Measuring Level Of Individual Innovativeness Among UTeM's Engineering Students. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakfar, Noor Amira (2016) Smart Monitoring System For Vegetables Greenhouse Using Raspberry PI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamani, Md Sani and Hadhrami, Abd Ghani and Loi, Wei Sen and Rosli, Besar (2016) Real-Time Daytime Road Marker Recognition Using Features Vectors And Neural Network. 2015 IEEE Conference On Sustainable Utilization And Development In Engineering And Technology (CSUDET). pp. 38-43. ISSN 978-147998612-5

Zamberi, Jamaludin and Jailani, Jamaludin and Chiew, Tsung Heng and Abdullah, Lokman and Nur Aidawaty, Rafan and Madihah, Maharof (2016) Sustainable Cutting Process For Milling Operation Using Disturbance Observer. Procedia CIRP, 40. pp. 486-491. ISSN 2212-8271

Zambri, Muhammad Hatta (2016) Incorporating Flywheel Hybrid Module In Motorcycle : Performance Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamli, Zeety Hidayah (2016) Smart Safety Home System With GSM Notification. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Liyana Hazwani (2016) Development Of Wireless Power Transfer (WPT) Technology For Mini Aquarium Using Capacitive Power Transfer (CPT) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Nurin Aifaa (2016) Design Optimization Of Car Jack Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamri, Ruzaidi (2016) Surface Defect Detection And Polishing Parameter Optimization Using Image Processing For G3141 Cold Rolled Steel. PhD thesis, Universiti Teknikal Malaysia Melaka.

Zamzuri, Muhammad Rusyduddin (2016) A Microstrip U-Shape Antenna Design For Breast Cancer Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaraini , Mohd Nazrien (2016) The Analysis Of Metadata Based Classification For Classifying Educational Websites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zarina, Mohd Noh and Abdul Rahman, Ramli and M. Iqbal, Saripan and Marsyita, Hanafi (2016) Assessment Of Near Infrared LED Radiation Pattern Using Otsu Thresholding. 2015 IEEE Student Symposium In Biomedical Engineering And Sciences (ISSBES). pp. 1-6. ISSN 978-146737815-4

Zikri Abadi, Baharudin and Ahmad Idil, Abdul Rahman and M., Zainol and Mohamad Rom, Tamjis and Mohd Ariff, Mat Hanafiah and Mohd Ruddin, Ab Ghani and Lokman, Abdullah and Othman, Aman and Hassan, Adnan and Ahmad Aizan, Zulkefle and Ismail, Abu Shah and P. N. S. A. B., Rahman and M. R., Muhammad (2016) Cloud-To-Ground Lightning Flashes Under The Influence Of Pollution In Malaysia And Some Countries. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8893-8896. ISSN 1819-6608

Zin, Muhamad Sharul Nizam (2016) Improvement On Pump Footing System For Misalignment Correction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zini, Nor Hashikin (2016) Innovation Capabilities, Perception And On Mechanism Open Innovation In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zobilah, Abdullah Mohammed Saghir and Shairi, Noor Azwan and Zakaria, Zahriladha and Jawad, M. S (2016) RF Switches In Wide-, Broad-, And Multi-Band Rf Front-End Of Wireless Communications: An Overview. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3244 - 3248. ISSN 1819-6608

Zolkapli , Zulfikri Zaki (2016) Influnce Of Tooth Designs On Electromagnetic Characteristics In Fractional-Slot Permanent Magnet Brushless Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zolkifri, Nur Izzati (2016) Final Year Project Report. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zolkifri, Nur Izzati (2016) Final Year Project Report. Project Report. Universiti Teknikal Malaysia Melaka, Melaka, Malaysia. (Submitted)

Zubaidi, Nur Zurain (2016) Analysis Comparison Between Solidworks Plastics And Simulation Moldflow Adviser Of Optimum Gate Size For The Design Of A Single Cavity Plastic Name Card Holder Mold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuber Ahmadi, Muhd Zharif Rifqi (2016) An Optimal Switching Strategy Of Cascaded H-Bridge Multilevel Inverter For High-Performance Direct Torque Control Of Induction Machines. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zul Hasrizal, Bohari and Mohd Hafiz, Jali and Mohamad Faizal, Baharom and Mohamad Na'im, Mohd Nasir and Nik Mohd Fariz, Mohd Nawi and Yasmin Hanum, Md Thayoob (2016) Transformer Mechanical Integrity Evaluation Via Unsupervised Neural Network (UNN) In Smart Grid Network. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 167-171. ISSN 978-147998252-3

Zulhani, Rasin and M.F., Rahman (2016) Control Of Bidirectional DC-DC Converter For Battery Storage System In Grid-Connected Quasi-Z-Source PV Inverter. 2015 IEEE Conference on Energy Conversion (CENCON). pp. 205-210. ISSN 978-147998598-2

Zulhisyam, Salleh and Marizan, Sulaiman and Rosli, Omar (2016) Tuning Fuzzy Membership Functions To Improve Performance Of Vector Control Induction Motor Drives. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 8 (2). pp. 1-4. ISSN 2180-1843

Zulkafle, Muhammad Zulfirdaus (2016) Experimental Investigation Of Buckling Behavior Of Cracked Steel Cones Subjected To Axial Compression. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkapli, Nor Najihah (2016) Sol Gel Process Of Cobalt Nanopracticles Preparation As Effective Catalyst For CNT Growth Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkfli, Nur Afifah (2016) Fiber Optic Liquid Sensor For Types Of Engine Oil Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifilie , Ibrahim (2016) Harmonic Reduction Comparison In Multilevel Inverters For Industrial Application. Journal Of Theoretical And Applied Information Technology, 63. p. 570. ISSN 1992-8645

Zulkifli, Azni (2016) Optimization Of Conceptual Manual Wheelchair Design Using Integrated QFD And DFMA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Mohd Rodzi (2016) Study Of Thermal Effect On Ester Oil Dielectric Stress Using Breakdown Measurements And Total Acid Number (TAN) Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkipli, Muhammad Ashwadie (2016) Development Of Temperature Controller System For Quail Coop Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkipli, Muhammad Irsyad Haziem (2016) Effects Of Inlet Velocity On Fluid Flow In T-Junction Pipe For Combining Flow. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuraimi, Mohd Haidil (2016) SPDT Switch Design Using Switchable Resonator At 5ghz For Wireless Communications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

This list was generated on Sun Aug 18 00:04:26 2019 MYT.