Items where Year is 2016
Up a level |
Article
A Ghani, Jaharah and Che Haron, Che Hassan and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Tomadi, Siti Haryani (2016) Wear Mechanism Of Coated And Uncoated Carbide Cutting Tool In Machining Process. Journal Of Materials Research, 31 (13). pp. 1873-1879. ISSN 0884-2914
Ab Ghani, Mohd Ruddin and Hussein, Saif Tahseen and Jano, Zanariah and Tole, Sutikno (2016) Particle Swarm Optimization Performance: Comparison Of Dynamic Economic Dispatch With Dantzig-Wolfe Decomposition. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 14 (3). pp. 1042-1051. ISSN 1693-6930
Ab Ghani, Mohd Ruddin and Liaw, Geok Pheng and Gan, Chin Kim and Tole Sutikno (2016) Sensitivity Analysis And Comparison Between 25kw Parabolic DISH System. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 14 (3). pp. 807-814. ISSN 1693-6930
Ab Ghani, Mohd Ruddin and Liaw, Geok Pheng and Gan, Chin Kim and Tole Sutikno (2016) Temperature Control Of The 25kw Parabolic Dish-Stirling Engine System. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 14 (3). pp. 800-806. ISSN 1693-6930
Ab Ghani, Mohd Ruddin and Nabil, Farah and Mat Lazi, Jurifa and Mohd Amin, Nur Huda and Othman, Syariffah and Jano, Zanariah (2016) Comparative Study Of Different Multilevel Topologies Of Five Level Inverter Using Spwm. International Journal of Applied Engineering Research, 11 (20). pp. 10139-10145. ISSN 0973-4562
Ab. Ghani, Mohd Ruddin and Abdulzahra, Ali Abdulhasan and Tamjis, Mohamad Rom and Mohamed Khairuddin, Mohamed Syafiq Akmal and Liaw, Geok Pheng and Saif T. H. and Alwahib, Ghassan Jawad Kadhim and Ahmed, Dawood Saleem and Zulkefle, Ahmad Aizan (2016) Comparison study of energy efficiency activities programs among the selected region and countries: lessons learned for Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3980-3984. ISSN 1819-6608
Abd Aziz, Mohamad Zoinol Abidin and Nur Shaheera Alia, Sadick Ali and Ahmad, Badrul Hisham and Mohd Azlishah, Othman and Hamzah Asyrani, Sulaiman (2016) Analysis Of Tapered Finline In Power Combiner For Wideband Application. Jurnal Teknologi (Sciences And Engineering), 78 (6-7). pp. 121-125. ISSN 0127-9696
Abd Aziz., Mohamad Zoinol Abidin and Abu Bakar, Hamizan and Ahmad, Badrul Hisham and Azahari, Salleh and Ghani, Suhana and Phoo, Kho Shin and Hassan, Nornikman and Sulaiman, Hamzah Asyrani and Othman, Mohd Azlishah (2016) Design Of Linear And Circular Polarized Antenna For WLAN Application. Jurnal Teknologi, 78 (6-5). pp. 129-137. ISSN 0127-9696
Abd Latif, Mohd Abrar and Abd Manaf, Mohd Edeerozey and Firdaus, Muhammad ‘Izzat Syahmi and Maslamany, Loganarrth and Munawar, Rose Farahiyan (2016) Effects of Particulate Types on Biomass Particulate Filled Kenaf/Polypropylene Composite. Key Engineering Materials, 694. pp. 23-28. ISSN 1662-9795
Abd Manaf, Mohd Edeerozey and Nitta, Koh-Hei and Yamaguchi, Masayuki (2016) Mechanical Properties of Plasticized Cellulose Ester Films at Room and High Temperatures. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2354-2358. ISSN 1819-6608
Abd Rahim, Toibah and Sato, Masahiro and Yamada, Motohiro and Fukumoto, Masahiro (2016) Cold-Sprayed TiO2 Coatings From Nanostructured Ceramic Agglomerated Powders. Materials And Manufacturing Processes, 31 (11). pp. 1527-1534. ISSN 1042-6914
Abd Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Abdullah, Jaafar and Mohmad Ameran, Hanis Liyana (2016) Electrical capacitance tomography: A review on portable ECT system and hardware design. Sensor Review, 36 (1). pp. 64-70. ISSN 0260-2288
Abdelrafe, Elzamly and Burairah, Hussin and Norhaziah, Md Salleh and Abdul Samad, Shibghatullah (2016) Managing and controlling design process issues by using stepwise approach modelling. Research Journal Of Applied Sciences, Engineering And Technology, 13 (2). pp. 85-97. ISSN 2040-7459
Abdollah, Mohd Fadzli bin (2016) Tribology in Malaysia: General perspective. TTA E-Magazine. pp. 6-10. ISSN 228-1732
Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2016) When should i change my tire? CARe Newsletter. p. 5. ISSN 2289-9871
Abdul Hadi, Musfirah and A Ghani, Jaharah and Che Haron, Che Hassan and Kasim, Mohd Shahir (2016) Effect Of Cutting Speed On The Carbide Cutting Tool In Milling Inconel 718 Alloy. Journal Of Materials Research, 31 (13). pp. 1885-1892. ISSN 0884-2914
Abdul Hamid, Rahimah and Ito, Teruaki (2016) 3D Prosthodontics Wire Bending Mechanism With A Linear Segmentation Algorithm. Journal of Advanced Manufacturing Technology (JAMT) . PP 33- 45. ISSN 1985-3157
Abdul Rahman, Azrul Azwan and Mohamad, Nor Rizan (2016) Software-In-The-Loop Technique: An Approach To Support Reconfiguration Of Manufacturing System. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9789-9795. ISSN 1819-6608
Abdul Syukor, Mohamad Jaya and Mu*ath Ibrahim, Mohammad Jarrah and Mohd Asyadi Azam, Mohd Abid and Mohd Razali, Muhamad (2016) Intelligence Integration Of Particle Swarm Optimization And Physical Vapour Deposition For Tin Grain Size Coating Process Parameters. Journal Of Theoretical And Applied Information Technology, 84. pp. 355-369. ISSN 1992-8645
Abdul Wahab, Fauzi and Tan, Kien Leong and Zulkifli, Hasnani and Ibrahim, Mohamad Izuan and Talib, Muhamad Akmal and Zamri, Nur Ain and Mahmoud Khatab, Omar Khatab Ibrahim (2016) Multiple Transmitters & Receivers For Free Space Optical Communication Link Performance Analysis. Journal Of Telecommunication Electronic And Computer Engineering, 8 (5). pp. 29-32. ISSN 2180 – 1843
Abdulameer, Ashwaq and Sulaiman , Marizan and Mohd Aras, Mohd Shahrieel and Saleem, Dawood (2016) Gui Based Control System Analysis Using Pid Controller For Education. Indonesian Journal Of Electrical Engineering And Computer Science, 3 (1). pp. 91-101. ISSN 2502-4752
Abdullah, Amirah and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Poh, Ban Wei and Md Isa, Mohamed Hafiz and Zainal Abidin, Syazwani (2016) Thermal conductivity and viscosity of deionised water and ethylene glycol-based nanofluids. Journal of Mechanical Engineering and Sciences (JMES), 10. pp. 2249-2261. ISSN 2289-4659
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2016) The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777
Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792
Abdullah, S.F and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Mohd Saad, Wira Hidayat (2016) Fingerprint Gender Classification Using Univariate Decision Tree (J48). International Journal Of Advanced Computer Science And Applications (IJASCA), 7 (9). pp. 217-221. ISSN -
Abdullah, Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Mohd Saad, Wira Hidayat (2016) Development of a fingerprint gender classification algorithm using fingerprint global features. International Journal of Advanced Computer Science and Applications, 7 (6). pp. 275-279. ISSN 2158-107X
Abdullah, Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Mahadhir, Majidah and Abal Abas, Zuraida (2016) Fingerprint Based Gender Classification Using Discrete Wavelet Transform And K-Nearest Neighbor. International Journal of Computer Science and Information Security (IJCSIS), 14 (8). pp. 340-344. ISSN 1947-5500
Abdullah , Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Mohd Saad, Wira Hidayat (2016) Support Vector Machine, Multilayer Perceptron Neural Network, Bayes Net And K-Nearest Neighbor In Classifying Gender Using Fingerprint Features. International Journal of Computer Science and Information Security (IJCSIS), 14 (7). pp. 336-340. ISSN 1947-5500
Abdullah Mohammed Saghir, Zobilah and Zahriladha, Zakaria and Noor Azwan, Shairi (2016) Selectable Multiband Isolation Of Single Pole Double Throw Switch Using Transmission Line Stub Resonator For Wimax And Lte Applications. IET Microwaves, Antennas & Propagation. pp. 1-19. ISSN 1751-8725
Abu Bakar, Kamarudin and Amat Senin, Aslan (2016) Modelling Sustainability Of SMEs Business In The New Economic Transition. International Journal Of Business, Economics And Law, 11 (2). pp. 32-37. ISSN 2289-1552
Abu Bakar, Norazhar (2016) Fuzzy logic approach for transformer remnant life prediction and asset management decision. IEEE Transactions on Dielectrics and Electrical Insulation, 23 (5). pp. 1070-9878. ISSN 1070-9878
Abu Bakar, Norazhar and Abu-Siada, A. (2016) A Novel Method of Measuring Transformer Oil Interfacial Tension Using UV-Vis Spectroscopy. IEEE Electrical Insulation Magazine, 32 (1). pp. 7-13. ISSN 0883-7554
Abu Hassan, Mahadi and Sidek, Safiah and Mohamed, Shahrulanuar and Kudus, Norliah (2016) The Perspectives Of Four Muslim Scholars On Islamisation Of Science. Science International (Lahore), 28 (2). pp. 1359-1362. ISSN 1013-5316
Abu Hussin, Farhana and Ahmad, Badrul Hisham and Abd. Aziz, Mohamad Zoinol Abidin and Suaidi, Mohamad Kadim (2016) Modified Printed Dipole With Reflector And Director. Jurnal Teknologi, 78 (6-4). pp. 137-140. ISSN 0127-9696
Abu-Khadrah, Ahmed Ismail Mohammad and Zakaria, Zahriladha and Othman, Mohd Azlishah and Mohd Zin, Mohd Shahril Izuan (2016) Markov Chain Model And Performance Enhancement For EDCA Protocol. Journal Of Communications, 11 (8). 748 - 757. ISSN 1796-2021
Ahmad, Asmala and Shaun, Quegan (2016) Quality Assessment Of Restored Satellite Data Based On Signal To Noise Ratio. Applied Mathematical Sciences, 10 (49). pp. 2443-2450. ISSN 1314-7552
Ahmad, Azman and Othman, Abdul Rani and Zakaria, Zahriladha and Pongot, Kamil (2016) A Diplexed Bandpass Filter For Dual Band RF Front-End Receiver At 2.4 Ghz And 5.75 Ghz. International Journal of Engineering and Technology (IJET), 8 (3). 1571 -1578. ISSN 0975-4024
Ahmad, Badrul Hisham and Hassan, Nornikman (2016) Dual Band Printed Folded Dipole Antenna For Wireless Communication At 2.4 GHz And 3.5 GHz Applications. 2015 Asia-Pacific Microwave Conference (APMC), 3. pp. 1-3. ISSN 978-1-4799-8765-8
Ahmad Fateh, Mohamad Nor and Marizan, Sulaiman (2016) Voltage Stability Assessment Of Power System Network Using QV And PV Modal Analysis. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 7-11. ISSN 2180-1843
Ahmad Muhammad, Aziz and Mohd Zaidi, Omar and Zainuddin, Sajuri and Mohd Shukor, Salleh (2016) Microstructural Changes Of Aluminium Alloy A319 On Cooling Slope Plate. Jurnal Teknologi, 78 (6-9). pp. 121-127. ISSN 0127-9696
Ahmad Muhammad, Aziz and Mohd Zaidi, Omar and Zainuddin, Sajuri and Mohd Shukor, Salleh (2016) Microstructural Morphology Of Rheocast A319 Aluminium Alloy. Advances In Mechanical Engineering, 8 (5). pp. 1-10. ISSN 1687-8132
Ahmad Yusuf, Ismail and M. J., Chen and M. F., Azizi and M. A., Sis (2016) Experimental Investigation On The Use Of Natural Waste Fibres As Acoustic Material Of Noise Silencer. Journal Of Advanced Research In Materials Science, 22 (1). pp. 1-10. ISSN 2289-7992
Ahmad Yusuf, Ismail and Norshadatulakmar, Mat Shadid and Aliah Mastura, Mohd Nizam (2016) Development Of Green Curtain Noise Barrier Using Natural Waste Fibres. Journal Of Advanced Research In Materials Science, 17 (1). pp. 1-9. ISSN 2289-7992
Ahmad Zaki, Shukor and Jun Wei, Lee and Muhammad Herman , Jamaluddin (2016) Investigation On Force Scaling For Multi Degree Of Freedom Bilateral Teleoperation Control System. International Journal of Mechanical and Mechatronics Engineering, 16 (6). pp. 1-11. ISSN 2077-124X
Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin and Muhammad Fahmi, Miskon and Fariz, Ali @ Ibrahim and Muhammad Qamarul Arifin, Redzuan (2016) An Analysis Of Sensor Placement For Vehicle's Blind Spot Detection And Warning System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 101-106. ISSN 2180-1843
Ahmat, Norun Najjah and Sarodin, Mohd Safari (2016) Tahap Kesedaran Penjawat Awam Islam Terhadap Kepentingan Takaful Hayat (The Level Of Understanding Among The Muslim Government Sector Employee On The Importance Of Takaful). Journal Of Human Capital Development (JHCD), 9 (2). pp. 1-10. ISSN 1985-7012
Aiman Zakwan, Jidin and Norfadzlia, Mohd Yusof and Tole, Sutikno (2016) Arduino Based Paperless Queue Management System. TELKOMNIKA (Telecommunication Computing Electronics And Control), 14 (3). pp. 839-845. ISSN 1693-6930
Aiman Zakwan , Jidin (2016) Arduino Based Paperless Queue Management System. Telkomnika Telecommunication,Computing,Electronics and Control, 14 (3). pp. 839-845. ISSN 1693-6930
Aiman Zakwan , Jidin (2016) Wireless Voice-Based Wheelchair Controller System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 117-122. ISSN 2180-1843
Al Amin , Mohamed Sultan (2016) Circular Economy Ownership Models:A View From South Africa Industry. Procedia Manufacturing, 8. pp. 284-291. ISSN 2351-9789
Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan (2016) Symmetrical Split Ring Resonator Metamaterials For Microwave Biosensor. ARPN Journal Of Engineering And Applied Sciences, 11 (6). 3938 - 3942. ISSN 1819-6608
Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan (2016) A novel symmetrical split ring resonator based on microstrip for microwave sensors. Measurement Science Review, 16 (1). pp. 21-27. ISSN 1335-8871
Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan (2016) A novel symmetrical split ring resonator based on microstrip for microwave sensors. Measurement Science Review, 16 (1). 21 - 27. ISSN 1335-8871
Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan and Ab Rashid, Siti Rosmaniza (2016) A high sensitive microwave sensor based on symmetrical split ring resonator for material characterization. Microwave And Optical Technology Letters, 58 (9). 2106 - 2110. ISSN 1098-2760
Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan and Shairi, Noor Azwan (2016) A Novel Microwave Sensor With High-Q Symmetrical Split Ring Resonator For Material Properties Measurement. Jurnal Teknologi , 78 (10-3). 37 - 42. ISSN 2180-3722
Al-Hegazi, Ammar Abdullah Hussein and Zakaria, Zahriladha and Shairi, Noor Azwan and Salleh, Azahari (2016) Review Of Recent Developments In Filtering-Antennas. International Journal on Communications Antenna and Propagation (IRECAP), 6 (3). 125 - 131. ISSN 2039 – 5086
Al-Shami, Sayed Samer Ali and Muhamad, Mohd Razali and Abdul Majid, Izaidin and Yunus, Ahmad Rozelan and RASHID, NURULIZWA (2016) The Effect of Microfinance on women's empowerment: Evidence from Malaysia. Asian Journal of Women's Studies, 22 (3). pp. 318-337. ISSN 1225-9276
Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132
Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Alias , Khamis and Mohd Ruddin, Ab Ghani and Gan, Chin Kim and Muhammad Nizam , Kamarudin (2016) Voltage And Frequency Control Of Microgrid System With Demand Response. International Journal of Simulation Systems Science & Technology, 17 (41). pp. 1-6. ISSN 1473-8031
Allan , Soon Chan and Hee, Kee Min and Kuah, Guan Keong (2016) Smart Air Conditioning System. Smart Air Conditioning System. pp. 1-6. ISSN XXXX-XXXX (Unpublished)
Amaluddin, Zainuddin and Syafeeza, Ahmad Radzi and Mazree, Ibrahim and Norihan, Abdul Hamid (2016) A Development of Electrical Vehicle Charging System Using Wireless Power Transfer. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6328-6333. ISSN 1819-6608
Anis Suhaila, Mohd Zain and Nor Fatihah, Mohd Zain and Fauziyah, Salehuddin and N., Jamaluddin and N., Abdullah Yaacob (2016) Design And Characterization Of 20nm SOI MOSFET Doping Abruptness Dependent. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6344-6348. ISSN 1819-6608
Anisah, Abd Latiff and Noraiham, Mohamad and Jeefferie, Abd Razak and Mohd Hayatunnufus, Md Nasir and Siti Rahmah, Shamsuri and Mazlin Aida, Mahamood and Muhamad Ilman Hakimi Chua, Abdullah and Hairul Effendy, Ab Maulod (2016) Correlation Of Wear Characteristics With Hardness Of Recycled Carbon Fiber Prepreg Reinforced Polypropylene Composites. Journal Of Materials Research, 31 (13). pp. 1908-1913. ISSN 0884-2914
Annathurai, Vinodh and Gan, Chin Kim and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) Shading Analysis For The Siting Of Solar PV Power Plant. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5021-5027. ISSN 1819-6608
Annathurai, Vinodh and Gan, Chin Kim and Ibrahim, Khairul Anwar and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) A review on the impact of distributed energy resources uncertainty on distribution networks. International Review of Electrical Engineering (IREE), 11 (4). pp. 420-427. ISSN 1827- 6660
Anuar , Mohamed Kassim and Takashi , Yasuno and Hiroshi, Suzuki and Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Jafar, Fairul Azni and Subramonian, Sivarao (2016) Conceptual Design And Implementation Of Electronic Spectacle Based Obstacle Detection For Visually Impaired Persons. JOURNAL OF ADVANCED MECHANICAL DESIGN, SYSTEMS, AND MANUFACTURING, 10 (7). pp. 1-12. ISSN 1881-3054
Asmala, A. and Shaun, Quegan (2016) The Effects of Haze on the Accuracy of Maximum Likelihood Classification. Applied Mathematical Sciences, 10 (39). pp. 1935-1944. ISSN 1312-885X
Asmala, A. and Shaun, Quegan (2016) Haze Removal Concept in Remote Sensing. Applied Mathematical Sciences, 10 (18). pp. 845-859. ISSN 1312-885X
Azdiana, Md Yusop and Ramizi, Mohamed and Azah, Mohamed (2016) Inverse Dynamic Analysis Type Of MPPT Control Strategy In A Thermoelectric-Solar Hybrid Energy Harvesting System. Renewable Energy, 86. pp. 682-692. ISSN 0960-1481
Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039
Azman, Ahmad and Abdul Rani, Othman and Zahriladha, Zakaria and Kamil, Pongot (2016) A Diplexer Bandpass Filter For Dual Band RF Front-End Receiver At 2.4 GHz And 5.75 GHz. International Journal Of Engineering And Technology (IJET), 8 (3). pp. 1571-1578. ISSN 2319-8613
Azman, Ahmad and Abdul Rani, Othman and Zahriladha, Zakaria and Kamil, Pongot (2016) A Two Stage Of Concurrent Dual-Band Low Noise Amplifier Using Current-Reused With Hi-Pass And Lo-Pass Matching Technique. Journal Of Theoretical And Applied Information Technology, 89 (2). pp. 389-396. ISSN 1992-8645
Azmi, Awang Md Isa and Mustafa H., Othman and Zahariah, Manap and Mohd Sa'ari, Mohamad Isa and Mohd Shahril Izuan, Mohd Zin and Mohd Shakir, Md Saat and Zahriladha, Zakaria (2016) Improved Location And Positioning Utilizing Single MIMO Base Station In IMT-Advanced System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 75-82. ISSN 2180-1843
Azziddin, Mohamad Razali and Kamisman, Norazelina and Jurifa, Mat Lazi and Bahari, Norhazilina (2016) Differential evolution technique of HEPWM for three-phase voltage source inverter. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8958-8964. ISSN 1819-6608
Azziddin, Mohamad Razali and Kamisman, Norazelina and Mat Lazi, Jurifa and Bahari, Norhazilina (2016) HEPWM using differential evolution technique for three phase voltage source inverter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 325-330. ISSN 978-147998598-2
Basari, Amat Amir and Seiji, Hashimoto and Bunji, Homma and Hiroaki, Okada and Hideki, Okuno and Shunji , Kumagai (2016) Design and optimization of a wideband impact mode piezoelectric power generator. Ceramics International, 42. pp. 6962-6968. ISSN 0272-8842
Basiron, Halizah and Abdo Alrawhani, Ebrahim Mohammed and Sa'aya, Zurina (2016) Real estate recommender system using case-based reasoning approach. Journal Of Telecommunication,Electronic And Computer Engineering (JTEC), 8. pp. 177-182. ISSN 2180 – 1843
Basiron, Halizah and Shamsudin, Nurul Fathiyah and Sa'aya, Zurina (2016) Lexical based sentiment analysis–verb, adverb & negation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8. pp. 161-166. ISSN 2180-1843
Burairah, Hussin and Abdelrafe, Elzamly (2016) Quantitative and intelligent risk models in risk management for constructing software development projects: A review. International Journal Of Software Engineering And Its Applications, 10 (2). pp. 9-20. ISSN 1738-9984
Burvill, Colin and Field, Bruce and Abdullah, Zulkeflee and Alias, Maizam (2016) Problem-solving with industrial drawings: Supporting formal graphics language development for Malaysian engineering graduates. The International Journal Of Engineering Education, 32 (5). pp. 2172-2183. ISSN 0949149X
Chairul, Saleh and Nur Rachman, Dzakiyullah and Jonathan Bayu, Nugroho (2016) Carbon Dioxide Emission Prediction Using Support Vector Machine. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-8. ISSN 1757-8981
Che Haron, Che Hassan and Sulaiman, Mohd Amri and A Ghani, Jaharah and Kasim, Mohd Shahir and Mohamad, Effendi (2016) Performance Of Carbide Tool In High Speed Turning Of TI-6AL-4V ELI Under Conventional Coolant And Minimal Quantity Lubrication. ARPN Journal Of Engineering And Applied Sciences, 11 (7). pp. 4817-4821. ISSN 1819-6608
Chee, Kiang Lam and Kenneth, Sundaraj and Mohd Nazri, Sulaiman and Fazilawati, A. Qamarruddin (2016) Virtual Phacoemulsification Surgical Simulation Using Visual Guidance And Performance Parameters As A Feasible Proficiency Assessment Tool. BMC Ophthalmology, 16 (1). pp. 1-9. ISSN 1471-2415
Cheong, Kar Mee and Hussin, Hanipah and Nair, R. Sudha and Noordin, Noorzareith Sofeia and Abdul Kadir, Noriati and Jusoh, Zainuddin (2016) The Relevance Of The Seven Premises Discussed By Fullan’s Change Theory In Higher Education In Malaysia. The Social Sciences, 11 (9). pp. 2206-2209. ISSN 1818-5800
Cheong, Kar Mee and Khoo, Linda Mei Sui and Jano, Zanariah and Hussin, Hanipah (2016) The Readiness Of The Administrators And Undergraduates In Using Massive Open Online Course (MOOC) In The Mandarin Subject. The Social Sciences, 11 (12). pp. 3017-3023. ISSN 1818-5800
Chiew, Tsung Heng and Jamaludin, Zamberi and Bani Hashim, Ahmad Yusairi and Rafan, Nur Aidawaty and Abdullah, Lokman and Salleh, Mohd Rizal and Arep @ Ariff, Hambali (2016) Design and analysis of super twisting sliding mode control for machine tools. Jurnal Teknologi , 78 (10-3). pp. 25-29. ISSN 2180-3722
Chong, Chee Soon and Rozaimi, Ghazali and Hazriq Izzuan, Jaafar and Sharifah Yuslinda, Syed Hussien and Yahaya, Md. Sam and Mohd Fua'ad, Rahmat (2016) Controller Parameter Optimization For An Electro-Hydraulic Actuator System Based On Particle Swarm Optimization Technique. Jurnal Teknologi, 78 (6-13). pp. 101-108. ISSN 0127-9696
Chong, Shin Horng and Kaiji, Sato (2016) Nominal Characteristics Trajectory Following Control As Practical Controller: A Review. IECON 2015 - 41st Annual Conference Of The IEEE Industrial Electronics Society. pp. 4790-4795. ISSN 978-147991762-4
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608
Fairul Azhar, Abdul Shukor and Raja Nor Firdaus Kashfi, Raja Othman and Mohd Luqman, Mohd Jamil (2016) Design Of A Linear DC Motor For High Thrust Constants Characteristics. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8764-8769. ISSN 1819-6608
Fairuz Fazillah, Shuhimi and Mohd Fadzli, Abdollah and Md Abul, Kalam and Masjuki, Hassan and Ashafi'e, Mustafa and Hilmi, Amiruddin (2016) Tribological Characteristics Comparison For Oil Palm Fibre/Epoxy And Kenaf Fibre/Epoxy Composites Under Dry Sliding Conditions. Tribology International, 101. pp. 247-254. ISSN 0301-679X
Farah Khalidah, Abdul Rahman and Mohd Shakir, Md Saat and Liyana Hazwani, Zamri and Nor Mazidah, Husain and N. A., Naim and Siti Amirah, Mohd Padli (2016) Design Of Class-E Rectifier With DC-DC Boost Converter. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 89-95. ISSN 2180-1843
Foo, Jia En and Chong, Shin Horng and Mohd Nor, Rozilawati and Loh, Ser Lee (2016) Positioning Control Of A One Mass Rotary System With CM NCTF Controller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (11). pp. 125-129. ISSN 2180-1843
Gan, Chin Kim and Lau, Cheiw Yun and Sulaima, Mohamad Fani and Salam, Zainal (2016) Impact Of Solar Photovoltaic System On Transformer Tap Changer In Low Voltage Distribution Networks. ENERGY PROCEDIA, 103 (-). pp. 58-63. ISSN -
Hairol Nizam, Mohd Shah and Marizan, Sulaiman and Ahmad Zaki, Shukor and Mohd Zamzuri, Ab Rashid (2016) Vision Based Identification And Detection Of Initial, Mid And End Points Of Weld Seams Path In Butt-Welding Joint Using Point Detector Methods. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 57-61. ISSN 2180-1843
Hairol Nizam, Mohd Shah and Marizan, Sulaiman and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin and Mohd Zamzuri, Ab Rashid (2016) A Review Paper On Vision Based Identification, Detection And Tracking Of Weld Seams Path In Welding Robot Environment. Modern Applied Science, 10 (2). pp. 83-89. ISSN 1913-1844
Hairol Nizam, Mohd Shah and Mohd Zamzuri, Ab Rashid and Marizan, Sulaiman and Ahmad Zaki, Shukor (2016) Vision Based Identification And Classification Of Weld Defects In Welding Environment: A Review. Indian Journal Of Science And Technology (INDJST), 9 (20). pp. 1-15. ISSN 0974-6846
Halinda, Musa and Namirah, Ab Rahim and Fadhlur Rahim, Azmi and Abdul Samad, Shibghatullah and Norfaridatul Akmaliah, Othman (2016) Social Media Marketing And Online Small And Medium Enterprises Performance: Perspective Of Malaysian Small And Medium Enterprises. International Review Of Management And Marketing, 6 (7S). pp. 1-5. ISSN 2146-4405
Hameed, Atyaf Khalid and Dewayanto, Nugroho and Dongyun, Du and Nordin, Mohd Ridzuan and Ab Rahim, Mohd Hasbi (2016) Kinetic and thermodynamics of methylene blue adsorption onto zero valent iron supported on mesoporous silica. Bulletin Of Chemical Reaction Engineering And Catalysis, 11 (2). pp. 250-261. ISSN 1978-2993
Hamzah, Rostam Affendi and Ibrahim, Haidi (2016) Literature Survey On Stereo Vision Disparity Map Algorithms. Journal Of Sensors, 2016 (-). pp. 1-23. ISSN 1687-725X
Hamzah, Rostam Affendi and Ibrahim, Haidi and Abu Hassan, Anwar Hasni (2016) Stereo Matching Algorithm Based On Illumination Control To Improve The Accuracy. Image Analysis & Stereology, 35 (1). pp. 39-52. ISSN 1580-3139
Hamzah Asyrani, Sulaiman and Abdullah, Bade and Mohd Harun, Abdullah (2016) Inner AABB For Distance Computation In Collision Detection. Jurnal Teknologi, 78 (2). pp. 21-26. ISSN 0127-9696
Hanifah, Abdul Hamid and Mokhtar, Mohd Yusof (2016) Conceptualizing Global Cloud Landscape: A Review Of Adoption Issues And Challenges. Research Journal Of Applied Sciences, 11 (6). pp. 333-339. ISSN 1815-932X
Hanim, Abdul Razak and Hazura, Haroon and Siti Khadijah, Idris and Anis Suhaila, Mohd Zain and Fauziyah, Salehuddin and P. Susthitha, Menon and Sahbudin, Shaari (2016) Modeling Mach Zehnder Interferometer (MZI) Modulator On Silicon-On-Insulator (SOI). Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 121-124. ISSN 2180-1843
Harriman, Razman and Azmi, Awang Md Isa and W.A.A., W. Razali and Mohamad Kadim, Suaidi and Mohd Shahril Izuan, Mohd Zin (2016) A Preliminary Study Of Characterization Techniques For Reticle ESD Threshold Voltage Measurement. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 53-57. ISSN 2180-1843
Harun, Mohamad Haniff and Al-Amani, Umar and Nor Hamizah, Miswan and Hamzah, Khairum and Ahmad Zubir , Jamil and Abdullah, Rohana and Yusoff, Mohd Rahimi (2016) Final Year Student’s Perception before Engaging Engineering Technology Program in UTeM. INTERNATIONAL JOURNAL OF ENGINEERING TECHNOLOGY AND SCIENCES. pp. 85-89. ISSN 2462-1269
Hasim, Norhaslinda and Chong, Shin Horng and Khor, Hooi Khee (2016) Disturbance Observer-Based Motion Control For A Simple Direct Drive System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (5). pp. 41-47. ISSN 2180-1843
Hassan, Aslinda and Bahaman, Nazrulazhar (2016) Proactive multi-copy routing protocol for urban vehicular ad hoc network. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3156-3160. ISSN 1819-6608
Hassan, Muhammad Zahir and Abdul Aziz, Mohd Kamarul Hafis and Delbressine, Frank L.M. and Rauterberg, Matthias (2016) Numerical analysis of spring stiffness in vehicle design development stage. International Journal of Applied Engineering Research, 11 (7). pp. 5163-5168. ISSN 0973-4562
Hassan, Nornikman and Abd. Aziz, Mohamad Zoinol Abidin and Noor Azizi, Muhammad Syafiq and Ramli, Mohamad Hafize and Othman, Mohd Azlishah and Sulaiman, Hamzah Asyrani and Ahmad, Badrul Hisham and Sulaiman, Mohd Hafiz (2016) Effect Of Quadruple P-Spiral Split Ring Resonator (QPS-SRR) Structure On Microstrip Patch Antenna Design. Jurnal Teknologi, 78 (5-5). pp. 119-123. ISSN 0127-9696
Hayfaa, Mohammed Hussein Hasan and Marizan, Sulaiman and Mohammed Rasheed, Jubair Al-Hiealy and Rosli, Omar and Mohd Shahrieel, Mohd Aras (2016) Comparative Studies Of Fuzzy Logic Base Power System Stabilizers In Enhancing Dynamic Stability Of A Generator Connected To Infinite Bus. World Applied Sciences Journal (WASJ), 34 (10). pp. 1370-1379. ISSN 1818-4952
Hazura, Haroon and Hanim, Abdul Razak and Nurul Nadia, Abd Aziz (2016) Performance Enhancement Of Optical Microring Resonator Using Taguchi Method Experimental Design. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3212-3216. ISSN 1819-6608
Hazura, Haroon and Nadia, A. A. and Hanim, Abdul Razak and Anis Suhaila, Mohd Zain and S. K., Othman and Fauziyah, Salehuddin (2016) Optical Routers Based On Microring Resonator For Optical Networks-On-Chip. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 41-44. ISSN 2180-1843
Hazura, Haroon and Nurul Nadia, Abd Aziz and Hanim, Abdul Razak and Anis Suhaila, Mohd Zain and S. K., Othman and Fauziyah, Salehuddin (2016) MRR Filter Characterizations In WDM System For Digital Signals Transmissions. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 29-32. ISSN 2180-1843
Hidayah, Rahmalan and Zaheera, Zainal Abidin and Zuraida, Abal Abas and Ahmad Fadzli Nizam, Abdul Rahman and Abdul Samad, Shibghatullah and Ong, Rhui Yong (2016) Prototype Deployment Of Examination And Quiz System (EQs) With Outcome Based Education In Networking System. 2015 IEEE International Conference On Communication, Networks And Satellite (COMNESTAT). pp. 43-47. ISSN 978-146738249-6
Hoo, Jian Ea and Lim, Kim Chuan (2016) Accuracy And Error Study Of Horizontal And Vertical Measurements With Single View Metrology For Road Surveying. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7872-7876. ISSN 1819-6608
Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Ahmad, Emy Zairah and Idris, Norain and Zakaria, Muhammad Zulfattah (2016) Modeling and simulation of doubly fed induction generator for wind turbine. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7331-7335. ISSN 1819-6608
Huzainirah, Ismail and Fazlli, Patkar and Auzani, Jidin and Sundram, Ramahlingam and Muhd Khairi, Abd Rahim and Yusnida, Ahmad Tarmizi and Atikah, Razi (2016) Direct Torque Control Of Induction Machine Using 3-Level Neutral Point Clamped Inverter. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 571-576. ISSN 978-146739572-4
Idris, M. Idzdihar (2016) Instability of phosphorous doped SiO2 in 4H-SiC MOS capacitors at high temperatures. Journal of Applied Physics, 120 (214902). pp. 1-10. ISSN 0021-8979
Jamaluddin, Muhammad Herman and Shukor, Ahmad Zaki and Miskon, Muhammad Fahmi and Ali @ Ibrahim, Fariz and Redzuan, Muhammad Qamarul Arifin (2016) An Analysis Of Sensor Placement For Vehicle’s Blind Spot Detection And Warning System. Journal of Telecommunication, Electronic and Computer Engineering, 8 (7). pp. 101-106. ISSN 2180-1843
Jaya Kumar, Yogan and Goh, Ong Sing and Basiron, Halizah and Ngo, Hea Choon and Suppiah, Puspalata C (2016) A review on automatic text summarization approaches. Journal Of Computer Science, 12. pp. 178-190. ISSN 1552-6607
Jayaganasan, Narayanasamy and Lau, Kok Tee and Muhammad Zaimi, Zainal Abidin (2016) Transistor Package’s Boron Nitride Film Microstructure And Roughness: Effect Of EPD Suspensions’ pH And Binder. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 8 (2). pp. 99-104. ISSN 2180-1843
Jiim, Anthony Bruster and Zakaria, Zahriladha and Mutalib, Mohamad Ariffin and Saifullah, Nasrullah and Hashim, Norlezah and Ruslan, Eliyana (2016) Tunable notch response for ultra wide-band bandpass filter. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 492-497. ISSN 978-147998252-3
Johari, Dalina and Ismail, Mohd Muzafar and Cooray, Vernon and Rahman, Mahbubur and Hettiarachchi, Pasan (2016) Characteristics of preliminary breakdown pulses in positive ground flashes during summer thunderstorms in Sweden. Atmosphere, 7 (3). pp. 1-18. ISSN 2073-4433
Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Nabilah , Mat Kassim and Manap, Mustafa and Ngatiman, Nor Azazi and Yusoff, Mohd Rahimi (2016) Localization Of Multiple Harmonic Sources For Inverter Loads Utilizing Periodogram. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 87-91. ISSN 2180-1843
Jubair Al-Hiealy, Mohammed Rasheed and Omar, Rosli and Sulaiman , Marizan (2016) Design And Development Of Dc-Dc Boost Converter Based On Dsp Tms320f2812 For Pv Application. Indian Journal Of Science And Technology (INDJST), 9 (44). pp. 1-13. ISSN 0974-6846
Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties. International Journal of Biological Macromolecules. pp. 575-581. ISSN 0141-8130
Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Effect of seaweed on physical properties of thermoplastic sugar palm starch/agar composites. Journal of Mechanical Engineering and Sciences (JMES). pp. 2214-2225. ISSN 2289-4659
Jurifa, Mat Lazi and Zulkifilie, Ibrahim and Marizan, Sulaiman and Azziddin, Mohamad Razali and Norazelina, Kamisman (2016) Independent Control For Dual-PMSM Drives Using Five-Leg Inverter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 143-148. ISSN 978-147998598-2
K., Rajammal and Sivakumar, Dhar Malingam and Navaneethan, Duraisamy and K., Ramesh and S., Ramesh (2016) Effect Of Sintering Temperature On Structural Properties Of LiMnPO4 Cathode Materials Obtained By Sol–Gel Method. Journal Of Sol-Gel Science And Technology, 79. pp. 1-9. ISSN 0928-0707
Kamarolzaman, Mohd Faezy and Mohd. Yusof, Sitinor Wardatulaina (2016) Promotional strategy: The case of Koko Minda Food Industries. Journal of Technology Management and Technopreneurship, 4 (1). pp. 55-66. ISSN 2231-7996
Kamarul Ariffin, Abd Rashid and Mohd Nor, Husain and Muhammad Majdi, Saad and Mohamad Zoinol Abidin, Abd Aziz and Nornikman, Hassan (2016) Compact Circular Polarized Antenna Design With H-Shaped Slots And Stair Notches For Wireless LAN Application Of 2.4 GHz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 13-17. ISSN 2180-1843
Kamat, Seri Rahayu and Mahmood, Noor Shakir and Ajmi, Ahmed Ali (2016) Review And Establishing Framework Model To An Adoption Of ISO 50001 Energy Management System In Power Stations. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). pp. 67-78. ISSN 1985-3157
Karis, Mohd Safirin and Abdul Razif, Nur Rafiqah and Mohd Ali, Nursabillilah and Rosli, M. Asyraf and Mohd Aras, Mohd Shahrieel and Md Ghazaly, Mariam (2016) Local Binary Pattern (LBP) With Application To Variant Object Detection: A Survey And Method. 2016 IEEE 12TH INTERNATIONAL COLLOQUIUM ON SIGNAL PROCESSING & ITS APPLICATIONS (CSPA2016), - (-). pp. 221-226. ISSN -
Karis, Mohd Safirin and Mohd Saad, Wira Hidayat and Mohd Ali, Nursabillilah and Khor, Chin We and Abdul Razif, Nur Rafiqah (2016) Fruit Sorting Based On Machine Vision Technique. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 31-35. ISSN 2180-1843
Kasim, Ayu Natasya and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar Malingam, Sivakumar (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2229-8649
Kasim, Rizanaliah and Abdullah, Abdul Rahim and Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Ramli, Mohd Zulkifli (2016) Nickel-Cadmium Battery Analysis Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3975-3979. ISSN 1819-6608
Kasim, Rizanaliah and Abdullah, Abdul Rahim and Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Ramli, Mohd Zulkifli (2016) Nickel-Cadmium Battery Analysis Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3975-3979. ISSN 1819-6608
Kasno, Mohammad `Afif and Mohd Aras, Mohd Shahrieel and Yeoh, Eik Keong and Abdul Azis, Fadilah and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2016) Design Analysis Of Remotely Amphibian Vehicle (RAV) – Underwater Drone. Jurnal Teknologi, 76 (1). pp. 1-5. ISSN 0127-9696
Kazuki, Tange and Shinfuku, Nomura and Shinobu, Mukasa and Hiromichi, Toyota and Syahrial, Fadhli (2016) Effect Of Pretreatment By Sulfuric Acid On Cellulose Decomposition Using The In-Liquid Plasma Method. Journal Of The Japan Institute Of Energy, 95 (12). pp. 1105-1109. ISSN 0916-8753
Khairil Ezwan, Kaharudin and Fauziyah, Salehuddin and Anis Suhaila, Mohd Zain and Muhammad Nazirul Ifwat, Abd Aziz and I., Ahmad (2016) Application Of Taguchi Method With The Interaction Test For Lower DIBL IN WSix/TiO2 Channel Vertical Double Gate NMOS. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7093-7103. ISSN 1819-6608
Khairul Anwar, Ibrahim and Mau, Teng Au and Gan, Chin Kim (2016) Generic Characteristic Of Medium Voltage Reference Network For The Malaysian Power Distribution System. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 204-209. ISSN 978-146739572-4
Khalid, Syazana Itqan and Ahmad Radzi, Syafeeza and Mohd Saad, Norhashimah and Abdul Hamid, Norihan and Mohd Saad, Wira Hidayat (2016) A Review On Finger-Vein Biometrics Identification Approaches. Indian Journal Of Science And Technology (INDJST), 9 (32). pp. 1-8. ISSN 0974-6846
Khamis, Alias and Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Ab Ghani, Mohd Ruddin and Abdul Rahim, Mohd Nazarul Affan (2016) Analysis Of Microturbine And Battery Storage System In Grid-Connected And Off-Grid Operations. International Review of Automatic Control (IREACO), 9. pp. 269-278. ISSN 1974-6067
Khamis, Noorli and Ahmadi, Nurul Aqilah and Jano, Zanariah (2016) Analyzing Crucial Elements Of Research Data Management. International Business Management, 10. pp. 3847-3852. ISSN 1993-5250
Kyairul Azmi, Baharin and Hasimah, Abdul Rahman and Mohammad Yusri, Hassan and Gan, Chin Kim (2016) Short-Term Forecasting Of Solar Photovoltaic Output Power For Tropical Climate Using Ground-Based Measurement Data. Journal Of Renewable And Sustainable Energy, 8 (5). ISSN 1941-7012
Lau, Kok Tee and Thangaraj, Joseph Sahaya Anand and Sorrell, Charles Christopher (2016) Protonation Of The Polyethyleneimine And Titanium Particles And Their Effect On The Electrophoretic Mobility And Deposition. Materials Chemistry And Physics, 182. pp. 359-364. ISSN 0254-0584
Lau , Kok Tee and Mohd Shahadan , Mohd Suan and M., Zaimi and Jeefferie , Abd Razak (2016) Microstructure And Phase Of Poly (Vinyliden Fluoride) Films By Electrophoretic Deposition:Effect Of Polymer Dispersion Stirring Conditions. Journal Of Advanced Manufactruring Technology, 10 (1). pp. 57-66. ISSN 1985-3157
Lee, Jun Wei and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin (2016) Investigation On Standardization Of Modal Space By Ratio For MDOF Micro-Macro Bilateral Teleoperation Control System. Modern Applied Science, 10 (11). pp. 98-109. ISSN 1913-1844
Lee, Jun Wei and Shukor, Ahmad Zaki and Jamaluddin, Muhammad Herman (2016) Investigation On Mdof Bilateral Teleoperation Control System Using Geared Dc-Motor. Modern Applied Science, 10 (11). pp. 54-66. ISSN 1913-1844
Liaw , Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2016) Study The Feasibility Of Parabolic Dish (Pd) From Several Prospective Criteri In Malaysia Environment. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3929-3937. ISSN 1819-6608
Liew, Pay Jun and Abdul Razak, Muhammad Raziman and Hussein, Nur Izan Syahriah and Ahsan, Qumrul (2016) Experimental Investigation Of Electrical Discharge Machining Using Dielectric Fluid With Surfactant And Different Carbon Additives. International Journal Of Applied Engineering Research, 11 (15). pp. 8507-8510. ISSN 0973-4562
Lim, Kim Chuan and Hoo, Jian Ea and Lee, Yin Hui (2016) Wi-Fi Sniffer Based Commuters Statistics Collection System For Reliable Bus Scheduling System. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7883-7887. ISSN 1819-6608
Lizawati, Salahuddin and Zuraini, Ismail and Wardah, Zainal Abidin (2016) A Systematic Literature Review On Safe Health Information Technology Use Behaviour. Jurnal Teknologi, 78 (4-3). pp. 1-7. ISSN 0127-9696
Loh, Ser Lee and Chong, Shin Horng and Foo, Jia En and Hee, Wai Keat and Hasim, Norhaslinda (2016) Fast Positioning Performance In Ball Screw Mechanism With Disturbance Observer. Jurnal Teknologi, 78. pp. 71-78. ISSN E-ISSN2180-3722
Low, Pei Sing and Ramlan, Roszaidi and Muhammad, N.S and Ghani, H. A. (2016) Comparison Of Harmonic Balance And Multiple Scale Method On Degree Of Nonlinearity For Duffing Oscillator. ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, 11 (8). pp. 5314-5319. ISSN 1819-6608
Lum, Yip Hing and Shaaban, Azizah and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz (2016) Slow release of urea encapsulated by starch PVA matrix. Key Engineering Materials, 707. pp. 28-31. ISSN 1662-9795
Lum, Yip Hing and Shaaban, Azizah and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad Yatim, Norazlina (2016) Boric acid modified starch polyvinyl alcohol matrix for slow release fertilizer. E-Polymers, 16 (2). pp. 151-158. ISSN 1618-7229
M.Y, YUHAZRI and Goh, Nilson and Sihombing, Haeryip and Abd Manaf, Mohd Edeerozey (2016) Mechanical Properties and Failure Analysis of Laminated Glass Reinforced Composite with Various Gelcoat Thickness. Key Engineering Materials, 694. pp. 8-12. ISSN 1662-9795
Mahanum, Mohd Zamberi and Farid Nasir, Ani (2016) Biodiesel Production From High FFA Rubber Seed Oil Using Waste Cockles. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7782-7787. ISSN 1819-6608
Mahanum, Mohd Zamberi and Farid Nasir, Ani and Mohd Fadzli, Abdollah (2016) Heterogeneous Transesterification Of Rubber Seed Oil Biodiesel Production. Jurnal Teknologi, 78 (6-10). pp. 105-110. ISSN 0127-9696
Maisarah, Abu and Maizatun, Muhamad and Hasnizom, Hassan and Zahriladha, Zakaria and Siti Adlina, Md Ali (2016) Proximity Coupled Antenna With Star Geometry Pattern AMC Ground Plane. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8822-8828. ISSN 1819-6608
Manap, Mustafa and Abdullah, Abdul Rahim and Saharuddin, Nur Zawani and Abidullah, Noor Athira and Ahmad, Nur Sumayyah and Bahari, Norhazilina (2016) Voltage source inverter switches faults analysis using s-transform. International Journal Of Electronics And Electrical Engineering, 4 (2). pp. 157-161. ISSN 2301-380X
Mariam, Md Ghazaly and Teo, Ting Huan and Vivek, Regeev and Kartikesu, Vijayan and Chong, Shin Horng and Aliza, Che Amran and Zulkeflee, Abdullah and Mohd Amran, Md Ali (2016) Point-To-Point (PTP) Control Performances Of An Upper Limb Robotic Arm. Jurnal Teknologi, 78 (7). pp. 131-140. ISSN 0127-9696
Marizan, Sulaiman (2016) Study Of Voltage And Power Stability Margins Of Electrical Power System Using ANN. IET Digital Library / Conference, 1 (1). pp. 1-7. ISSN -
Marizan, Sulaiman and Hayfaa, Mohammed Hussein and Rosli, Omar and Zulhisyam, Salleh (2016) Dynamic Stability Analysis Of Generator With Power System Stabilizers Using Matlab Simulink. Indonesian Journal Of Electrical Engineering And Computer Science, 2 (3). pp. 501-509. ISSN 2502-4752
Mas Haslinda, Mohamad and Aduwati, Sali and Nur S., Ibrahim and Fazirulhisyam, Hashim and Rosdiadee, Nordin (2016) Temporal Evaluation Of Secondary User Interference To Primary User In Cognitive Radio Networks. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 565-570. ISSN 978-146739572-4
Masrullizam, Mat Ibrahim and Syafeeza, Ahmad Radzi and Soraghan, John (2016) Tracking The Eyes Using Interdependence Mean Shift Tracking Algorithm With Appropriate Information Provided. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7862-7865. ISSN 1819-6608
Mastura, Mohd Azlim and Kalthom, Husain and Burairah, Hussin and Zulisman, Maksom (2016) Designing collaborative learning wizard to assist instructors in utilizing tools in LMS. 2015 IEEE Conference On e-Learning, e-Managernent And e-Services. pp. 81-85. ISSN 978-146739437-6
Mat, Zawiah and Basir, Siti Arni and Jano, Zanariah (2016) Factors affecting the practice of islamic professional ethics : A case study of a public sector. International Business Management, 10 (17). pp. 3860-3866. ISSN 1993-5250
Mat Ibrahim, Masrullizam and Ahmad Radzi, Syafeeza and John, Soraghan (2016) Tracking The Eyes Using Interdependence Mean Shift Tracking Algorithm With Appropriate Information Provided. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7862-7865. ISSN 1819-6608
Mat Kassim, Nabilah and Abdullah, Abdul Rahim and Abdul Kadir, Aida Fazliana and Shamsudin, Nur Hazahsha (2016) Analysis Of Harmonic Source Identifier Using Periodogram. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5071-5077. ISSN 1819-6608
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X
Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite. Tribology International, 94. pp. 352-359. ISSN 0301-679X
Maziati Akmal, M. H. and Mohd Warikh, Abd Rashid and Umar Al-Amani, Azlan and Mohd Asyadi Azam, Mohd Abid and Syahriza, Ismail (2016) Effect Of Amphoteric Dopant On The Dielectric And Structural Properties Of Yttrium Doped Potassium Sodium Niobate Thin Film. Materials Letters, 170. pp. 10-14. ISSN 0167-577X
Md Fahmi, Abd Samad (2016) Deterministic Mutation Algorithm As A Winner Over Forward Selection Procedure. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5114-5119. ISSN 1819-6608
Md Ghazaly, Mariam and Tee, Siau Ping and Tan, Ping Khai and Chong, Shin Horng and Che Amran, Aliza and Jamaluddin, Muhammad Herman and Mohd Aras, Mohd Shahrieel (2016) Tracking Control Performances Of A Dual-Limb Robotic Arm System. International Journal of Mechanical and Mechatronics Engineering, 16 (5). pp. 48-53. ISSN 2077-124X
Md Isa, Azmi Awang and Othman, Muhammad Hakim and Manap, Zahariah and Mohamad Isa, Mohd Sa'ari and Mohd Zin, Mohd Shahril Izuan and Md Saat, Mohd Shakir and Zakaria, Zahriladha (2016) Improved Location And Positioning Utilizing Single MIMO Base Station In IMT-Advanced System. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (1). 75 - 82. ISSN 2289-8131
Meor Said, Maizatul Alice and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah and Mohd Salleh, Noor Hasyierah and Misran, Mohamad Harris (2016) Dual Band Rectifying Circuit For Rf Energy Scavenging. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3286 - 3290. ISSN 1819-6608
Ming Hui, Tan and Shin Horng, Chong and Teng Fong, Tan and Ahmad Zaki, Shukor and Sakthivelu, Vasanthan and T.C., Ma and Mohamad Riduwan, Md Nawawi (2016) Tracking Control Of Vertical Pneumatic Artificial Muscle System Using Pid. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 129-132. ISSN 2180-1843
Miskon, Muhammad Fahmi (2016) MTUN: The history and future of public technical universities in Malaysia. TECHIES. pp. 8-9. ISSN 0128-1313
Miswan, Nor Hamizah and Hussin, Nor Hafizah and Mohd Said, Rahaini and Hamzah, Khairum and Ahmad, Emy Zairah (2016) ARAR algorithm in forecasting electricity load demand in Malaysia. Global Journal Of Pure And Applied Mathematics, 12 (1). pp. 361-367. ISSN 0973-1768
Miswan, Nor Hamizah and Mohd Said, Rahaini and Hussin, Nor Hafizah and Hamzah, Khairum and Ahmad, Emy Zairah (2016) Comparative performance of ARIMA and DES models in forecasting electricity load demand in Malaysia. International Journal Of Electrical & Computer Sciences IJECS-IJENS, 16 (1). pp. 6-9. ISSN 2227-2739
Mohamad Ariffin, Mutalib and Zahriladha, Zakaria and Noor Azwan, Shairi and Sam, Weng Yik (2016) Design Of Microstrip Bandpass Filter With Electronically Tunable Notch Response. 26th Conference Radioelektronika 2016. pp. 454-457. ISSN 978-150901674-7
Mohamad Basir, Muhammad Sufyan Safwan and Abdullah, Abdul Rahim and Ranom, Rahifa and Kasim, Rizanaliah and Selamat, Nur Asmiza and Shamsudin, Nur Hazahsha (2016) Experimental Verification Of Nickel-Metal Hydride Battery Parameters Estimation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 47-52. ISSN 2180-1843
Mohamad Hafiz, Harun and Mohd Razali, Md Yunos and Mohamad Zaharudin, Sariman and Fauzi, Ahmad and Khisbullah, Hudha and Rosli, Abu Bakar (2016) Semi-Active Secondary Suspension Control Using Fuzzy Skyhook For Improving Railway Vehicle Dynamics Performance In Lateral Direction. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2454-2461. ISSN 1819-6608
Mohamad Hafize, Ramli and Mohamad Zainol Abidin, Abd Aziz and Mohd Azlishah, Othman and Abdul Halim, Dahalan (2016) Design Multiband Planar Printed Monopole Antenna With Minkowski And Lollipop Defected Parasitic Structure (DPS) For Wireless Communication System. 26th Conference Radioelektronika 2016. pp. 475-480. ISSN 978-150901674-7
Mohamad Hafize, Ramli and Mohamad Zoinol Abidin, Abd Aziz and Mohd Azlishah, Othman and Nornikman, Hassan and Muhammad Syafiq, Noor Azizi and Siti Nurfarhanah, Azizul Azlan and Abdul Halim, Dahalan and Hamzah Asyrani, Sulaiman (2016) Design Of Sierpinski Gasket Fractal Antenna With Slits For Multiband Application. Jurnal Teknologi, 78 (5-8). pp. 123-128. ISSN 0127-9696
Mohamad Haniff , Harun and Khalil Azha, Mohd Annuar and Mohd Firdaus, Mohd Ab Halim and Mohd Hanif, Che Hasan and Mohd Shahrieel, Mohd Aras and Muhamad Faizal, Yaakub (2016) Peltier And Seebeck Efficacy Of Hot And Cold Air System For Portable O-Ref (Oven & Refrigerator) Application. Proceedings of Mechanical Engineering Research Day 2016. pp. 81-82. ISSN 9789670257709
Mohamad Hashim, Ummi Kalsom and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Sakidin, Hamzah and Balakrishnan, Subatira and Mohamad Isa, Mohd Sa'ari (2016) Change detection from landsat-5 TM satellite data. ARPN Journal Of Engineering And Applied Sciences, 11 (17). pp. 10234-10238. ISSN 1819-6608
Mohamad Razali, Azziddin and Rahman, ,Mahmudur Azizur and A. Rahim , Nasrudin (2016) Real-Time Implementation Of D-Q Control For Grid Connected Three Phase Voltage Source Converter. ASDDD, 4. p. 11. ISSN 1553-572X
Mohamad Ridzuan, Mohamad Radzi and Hassan, Elia Erwani and Abdullah, Abdul Rahim and Bahaman, Nazrulazhar and Abdul Kadir, Aida Fazliana (2016) A new meta heuristic evolutionary programming (NMEP) in optimizing economic energy dispatch. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 35-40. ISSN 2180-1843
Mohamed, N. J. and Sahib, Shahrin and Suryana, Nanna and Hussin, Burairah (2016) Understanding Network Congestion Effects On Performance: Article Review. Journal Of Theoretical And Applied Information Technology, 92 (2). pp. 311-321. ISSN 1992-8645
Mohamed Aminuddin, Mai Mariam and Balasubramaniam, Manimekalai (2016) Effect of electrode size on salinity-voltage correlation. MALTESAS Multi-Disciplinary Research Journal (MIRJO), 1 (1). pp. 9-13. ISSN 0127-6271
Mohamed Kassim, Anuar and Yasuno, Takashi and Suzuki, Hiroshi and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2016) The Improvement And Evaluation Of Electronic Spectacle Device Based On Obstacle Detection System For Visually Impaired Person. IEEE JAPAN, 1 (-). pp. 1246-1251. ISSN 1246-1252
Mohamed Kassim, Anuar and Yasuno, Takashi and Suzuki, Hiroshi and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2016) Indoor Navigation System Based On Passive RFID Transponder With Digital Compass For Visually Impaired People. (IJACSA) INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS, 7 (2). pp. 604-611. ISSN 2156-5570
Mohammad Taha, Mastura and Salit @ Sinon, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application Of Hybrid Sugar Palm-Filled Polyurethane Application Of Hybrid Sugar Palm-Filled Polyurethane Composites In Conceptual Design Of An Automotive Anti Roll Bar. Journal of Engineering and Technology (JET), 7 (1). pp. 102-113. ISSN 2180-3811
Mohammed, Rasheed and Rosli, Omar and Afiqah, Sabari and Marizan, Sulaiman (2016) Validation Of A Three-Phase Cascaded Multilevel Inverter Based On Newton Raphson (N.R.). Indian Journal Of Science And Technology (INDJST), 9 (20). pp. 1-13. ISSN 0974-6846
Mohammed, Rasheed and Rosli, Omar and Marizan, Sulaiman (2016) Design And Development Multilevel Inverterwith Different Modulation Index (MI) Based On Super Capacitor (SC) For Harmonic Reduction. World Applied Sciences Journal (WASJ), 34 (6). pp. 760-769. ISSN 1818-4952
Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Azahar, Arman Hadi and Ab Hadi, Nik Azran (2016) Photovoltaic Economic Potential For Investment Portfolio In South East Asia. ARPN Journal Of Engineering And Applied Sciences, 11 (19). pp. 11260-11265. ISSN 1819-6608
Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Mohd Sobran, Nur Maisarah and Bahar, Mohd Bazli and Oh, Kok Ken and Mat Ibrahim, Masrullizam and Johan, Nurul Fatiha (2016) Detection of multiple mangoes using histogram of oriented gradient technique in aerial monitoring. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2730-2736. ISSN 1819-6608
Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Wong, Gao Jie and Bahar, Mohd Bazli and Sulaiman , Marizan and Mat Ibrahim, Masrullizam and Zainal Abidin, Amar Faiz (2016) Quality checking and inspection based on machine vision technique to determine tolerance value using single ceramic cup. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2737-2742. ISSN 1819-6608
Mohd Ali, Nursabillilah and Soon, Wei Jun and Karis, Mohd Safirin and Md Ghazaly, Mariam and Mohd Aras, Mohd Shahrieel (2016) Object Classification And Recognition Using Bag-Of-Words (BOW) Model. 2016 IEEE 12th International Colloquium on Signal Processing & its Applications (CSPA2016), 4 - 6 March 2016, Melaka, Malaysia, 1 (-). pp. 216-220. ISSN -
Mohd Amman, Rosmia and Halim, Mohd Faizal and Dhar Malingam, Sivakumar and Abu Shah, Ismail (2016) Influences of thickness and geometrical change from draw forming in quasi-static axial compression simulation. International Review on Modelling & Simulations, 9 (6). pp. 442-449. ISSN 1974-9821
Mohd Annuar, Khalil Azha and Md Zin, Muhammad Haikal and Harun, Mohamad Haniff and Mohd Ab Halim, Mohd Firdaus and Azahar, Arman Hadi (2016) Design and Development of Search and Rescue Robot. International Journal of Mechanical & Mechatronics Engineering . pp. 36-41. ISSN 2077-124X (online) 2227-2771 (Print)
Mohd Aras, Mohd Shahrieel (2016) Introducing A New Research Group - Underwater Technology Research Group (UTERG). BULETIN RICE@UTEM (EDISI KEDUA), 2 (-). p. 21. ISSN -
Mohd Aras, Mohd Shahrieel and Khalaf, Ashwaq Abdulameer and Sulaiman, Marizan and Ahmed, Dawood Saleem (2016) Tuning methods of PID controller for DC motor speed control. Indonesian Journal of Electrical Engineering and Computer Science, 3 (2). pp. 343-349. ISSN 2502-4752
Mohd Azli, Salim and Azma, Putra and Muhd Ridzuan, Mansor and Musthafah, Mohd Tahir and Mohd Zaid, Akop and Mohd Azman, Abdullah (2016) Analysis Of Parameters Assessment On Laminated Rubber-Metal Spring For Structural Vibration. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-12. ISSN 1757-8981
Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ruslan, Eliyana and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2016) Microwave fluidic sensor using enhanced coupling peripheral Microstrip split-ring resonator sensor. 2015 IEEE International Conference on Control System, Computing and Engineering (ICCSCE). pp. 72-76. ISSN 978-147998252-3
Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ruslan, Eliyana and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2016) Circular Microfluidic Substrate Integrated Waveguide Resonator Sensor For Materials Characterization. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3217 - 3221. ISSN 1819-6608
Mohd Erdi, Ayob and Jumadi, Abdul Sukor and Mohd Zarar, Mohd Jenu (2016) An Overview On The Measurement Uncertainty Evaluation Of Electromagnetic Compatibility Test. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7214-7216. ISSN 1819-6608
Mohd Fahmi, Taher and Mohammad Haniff, Harun and Khalil Azha , Mohd Annuar and Mohd Firdaus , Mohd Ab Halim and Mohd Shahrieel, Mohd Aras and Arman Hadi, Azahar and A.F.Z, Abidin (2016) Development Of Autonomous Sweeper Robot For Badminton Court. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 129-133. ISSN 2180-1843
Mohd Hafiz, Jali and Ahmad Izzuddin, Tarmizi and Zul Hasrizal, Bohari and Hazriq Izzuan, Jaafar and Mohamad Na'im, Mohd Nasir (2016) Pattern Recognition Of EMG Signal During Load Lifting Using Artificial Neural Network (ANN). 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 172-177. ISSN 978-147998252-3
Mohd Hafiz, Sulaiman and Sani Irwan, Md Salim and Masrullizam, Mat Ibrahim (2016) Implementation On UTeMRISC Microcontroller With Embedded Fault-Tolerance. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6339-6343. ISSN 1819-6608
Mohd Hisham, Nordin and Kalaiselvan , Selvaraju and M., Fathullah (2016) Increasing ABB FlexPicker Robot’s Degree Of Freedom (DOF) Using Flexible End Effector. MATEC Web Of Conferences, 78 (01056). pp. 1-8. ISSN 2261-236X
Mohd Ibrahim, Imran and Abd Rahman, Tharek and Zakaria, Zahriladha (2016) 26 Ghz Open Ended Air Gap Cavity Rlsa Antenna For Next Generation Broadband Wireless Access. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (4). 21 - 24. ISSN 2289-8131
Mohd Khairy, Ismail and Azmi, Awang Md Isa and Mohd Nor, Husain and Muhammad Syahrir, Johal and Mohd Riduan, Ahmad (2016) Design And Development Of Modified-Proportional Fair Scheduler For LTE/LTE-Advanced. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3280-3285. ISSN 1819-6608
Mohd Narizee, Mohd Nasir and Laurent, Mezeix and Yulfian, Aminanda and M. A., Seman and Ahmad, Rivai and K. M., Ali (2016) Spring-Back Simulation Of Unidirectional Carbon/Epoxy L-Shaped Laminate Composites Manufactured Through Autoclave Processing. IOP Conference Series: Materials Science And Engineering, 114. pp. 1-11. ISSN 1757-8981
Mohd Nizam, Sudin and Shamsul Anuar, Shamsudin and Mohd Azman, Abdullah (2016) Effect Of Part Features On Dimensional Accuracy Of FDM Model. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8067-8072. ISSN 1819-6608
Mohd Riduan, Ahmad and Mona Riza, Mohd Esa (2016) The Estimation of Power Flux of Microwave Radiation From a Negative Narrow Bipolar Pulse at Low Earth Orbit Satellite Altitude. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 115-119. ISSN 2180-1843
Mohd Sa'at, Fatimah Al-Zahrah and Cho, Wei Yang (2016) Oscillatory Flow Across Plates With Different Shape Of Edges. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 8. pp. 77-91. ISSN 2180-1053
Mohd Salleh, Nurhashikin and Selamat, Siti Rahayu and Saaya, Zurina and Ahmad, Rabiah and Mas'ud, Mohd Zaki (2016) Identifying Cyber Violent Extremism (CYBER-VE) Components By Exploring Dark Web. International Journal of Computer Science and Information Security, 14 (9). pp. 52-61. ISSN 1947-5500
Mohd Shahadan, Mohd Suan and Mohd Rafie, Johan (2016) Synthesis Of Y1-xAlxBa2Cu3O7-δ Via Combustion Route: Effects Of Al2O3 Nanoparticles On Superconducting Properties. Physica B: Condensed Matter. pp. 1-18. ISSN 0921-4526
Mohd Shahrieel, Mohd Aras and Mohd Khairi, Mohd Zambri and Fadilah, Abdul Azis and Shahrum Shah, Abdullah and Anuar, Mohamed Kassim (2016) Design And Development Of Underwater Robot For Cleaning Process. Journal of Advanced Manufacturing Technology (JAMT), 10 (1). pp. 1-12. ISSN 1985-3157
Mohd Shahrieel, Mohd Aras and Muhammad Nizam, Kamarudin and Muhammad Hanif, Che Rusli and Muhammad Iktisyam, Mohd Zainal (2016) Small Scale Unmanned Underwater Remotely Operated Crawler (ROC). TELKOMNIKA Indonesian Journal of Electrical Engineering, 3 (3). pp. 1-8. ISSN 2302-4046
Mohd Shahrieel, Mohd Aras and Shahrum Shah, Abdullah and Siti Yasmin, Othman and Marizan, Sulaiman and Mohd Farriz, Md Basar and Mohd Khairi, Mohd Zambri and Muhammad Nizam, Kamarudin (2016) Fuzzy Logic Controller For Depth Control Of Underwater Remotely Operated Vehicle. Journal Of Theoretical And Applied Information Technology, 91 (2). pp. 275-288. ISSN 1992-8645
Mohd Shakir, Md Saat and Ong, Zhen Guat and Farah Khalidah, Abdul Rahman and Azmi, Awang Md Isa and Abdul Majid, Darsono (2016) Development Of Wireless Power Transfer Using Capacitive Method For Mouse Charging Application. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 460-471. ISSN 2088-8694
Mohd Yassim, Halyani and Hussin, Mohamed Saiful Firdaus and M. S., Azizi and A., Tajul and R. F., Farhana (2016) Modeling And Simulation Of Wind Turbine For Partial Load Operation. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 4934-4941. ISSN 1819-6608
Mohd Zaki, Mas'ud and Shahrin, Sahib and Mohd Faizal, Abdollah and Siti Rahayu, Selamat and Robiah, Yusof (2016) An Evaluation Of N-gram System Call Sequence In Mobile Malware Detection. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3122-3126. ISSN 1819-6608
Mohd Zalani, Naziatul Fazilah and Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli (2016) Tensile properties of woven kenaf fiber reinforced polypropylene hybrid aluminium-composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608
Mohd Zambri, Mohd Khairi and Mohd Aras, Mohd Shahrieel and Khamis, Alias and Hairi, Mohd Hendra (2016) Investigating The Impact Of Photovoltaic Connection To The Malaysian Distribution System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 23-28. ISSN 2180-1843
Mohd Zubir, Amir and Md Fahmi, Abd Samad (2016) Hardware-In-The-Loop Simulation Of Steer-By-Wire System In Automotive Vehicle. International Journal Of Advanced And Applied Sciences, 3 (9). pp. 51-58. ISSN 2313-626X
Muhamad Haffiz, Mohd Radzi and Kok, Swee Leong (2016) Fabrication Of BaTiO3 Thick-Film Lead-Free Piezoelectric Ceramic By Using Screen Printing Method. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8787-8793. ISSN 1819-6608
Muhamad Shahirul, Mat Jusoh and Mohd Yazid, Yahya and Nur Izan Syahriah, Hussein (2016) The Effect Of Fibre Layering Pattern In Resisting Bending Loads Of Natural Fibre-Based Hybrid Composite Materials. MATEC Web Of Conferences, 39. 01005-1. ISSN 2261-236X
Muhammad Ilman Hakimi Chua, Abdullah and Mohd Fadzli, Abdollah and Noreffendy, Tamaldin and Hilmi, Amiruddin and Nur Rashid, Mat Nuri (2016) Effect Of Hexagonal Boron Nitride Nanoparticles As An Additive On The Extreme Pressure Properties Of Engine Oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792
Muhammad Nazirul Ifwat, Abd Aziz and Fauziyah, Salehuddin and Anis Suhaila, Mohd Zain and Khairil Ezwan, Kaharudin (2016) Electrical Characteristics Of PMOS Bulk Mosfet And PMOS Silicon-On-Insulator (SOI) MOSFET Device. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6315-6318. ISSN 1819-6608
Muhammad Said, Nurlaela and Ali, Mohd Basri and Zakaria, Kamarul Ariffin and Mohd Daud, Mohd Ahadlin (2016) Comparison Of Impact Duration Between Experiment And Theory From Charpy Impact Test. MATEC Web Of Conferences, 78 (-). pp. 1-8. ISSN 2261-236X
Muhammad Syafiq, Noor Azizi and Azahari, Salleh and Adib, Othman and Najmiah Radiah, Mohamad and Nor Azlan, Mohd Aris and Maisarah, Abu and Nornikman, Hassan and Mohamad Hafize, Ramli and Thailis Bounya, Ngelayang (2016) UWB Rectangular Slotted Microstrip Patch Antenna In Proximity Of Human Arm Model. Jurnal Teknologi, 78 (5-4). pp. 111-115. ISSN 0127-9696
Muhammad Syafiq, Noor Azizi and Azahari, Salleh and Adib, Othman and Nor Azlan, Mohd Aris and Najmiah Radiah, Mohamad and Maisarah, Abu and Nornikman, Hassan and Mohamad Hafize, Ramli (2016) Non-Ionizing (Ultra-Wideband Frequency) Electromagnetic Radiation Effect On Nerve Fiber Action Potential Of Human Body. Jurnal Teknologi, 78 (5-6). pp. 131-137. ISSN 0127-9696
Muhammad Zuhair Bolqiah, Edris and Mohammed Saeed, Jawad and Zahriladha, Zakaria (2016) Surface Defect Detection And Neural Network Recognition Of Automotive Body Panels. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 117-122. ISSN 978-147998252-3
Muhammad Zuhair Bolqiah, Edris and Zahriladha, Zakaria and Mohd Shahril Izuan, Mohd Zin and Mohammed Saeed, Jawad (2016) Automated Deform Detection On Automotive Body Panels Using Gradient Filtering And Fuzzy C-Mean Segmentation. Jurnal Teknologi, 78 (6-8). pp. 93-99. ISSN 0127-9696
Muhd Khairi, Abd Rahim and Auzani, Jidin and Fazlli, Patkar and Sundram, Ramahlingam and Yusnida, Ahmad Tarmizi and Huzainirah, Ismail and Siti Azura, Ahmad Tarusan (2016) Minimization Of Torque Ripple And Switching Frequency Utilizing Optimal DTC Switching Strategy For Dual-Inverter Supplied Drive. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 49-54. ISSN 978-146739572-4
Muhd Khairi, Abd Rahim and Auzani, Jidin and Tole, Sutikno (2016) Enhanced Torque Control And Reduced Switching Frequency In Direct Torque Control Utilizing Optimal Switching Strategy For Dual-Inverter Supplied Drive. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 328-339. ISSN 2088-8694
Munawar, Rose Farahiyan and Arif, Afraha Baiti and Wan Abdullah Shani, Wan Nur Fateehah and Mohd Abid, Mohd Asyadi Azam and Abd Manaf, Mohd Edeerozey and Abu, Maisarah and Zainal Abidin, Muhammad Zaimi and Ismail , Syahriza (2016) A Facile Coating Method for Superhydrophobic Magnetic Composite Sheet from Biodegradable Durian Peel for Electromagnetic Wave Absorbance Application. Key Engineering Materials, 694. pp. 39-43. ISSN 1662-9795
Musa, Haslinda and Safri, Nursyairalia and Yunus, Ahmad Rozelan and OTHMAN , MOHD AZLISHAH (2016) The Characteristics of Users in the Adoption of Low Loss Microwaves Transmission Glass: A Conceptual Paper. Procedia - Social and Behavioral Sciences. pp. 548-554. ISSN 1877-0428
Musa, Haslinda and Shirly, Chung Hsian Li and Zuraida, Abal Abas and Norhidayah, Mohamad (2016) Adoption Factor Of Mobile Marketing: The Case Of Small Medium Enterprises In Malaysia. International Review Of Management And Marketing, 6 (7S). pp. 112-115. ISSN 2146-4405
Mutalib, M. A and Zakaria, Zahriladha and Shairi , Noor Azwan and Mohamad Isa, Mohd Sa'ari (2016) Microstrip Bandpass Filter With Reconfigurable Notch Response At 5.2 GHz Using Defected Microstrip Structure. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (5). 75 - 79. ISSN 2289-8131
Mutalib, Mohamad Ariffin and Zakaria, Zahriladha and Shairi, Noor Azwan (2016) Microstrip Bandpass Filter With Tunable Notch Response At 5.2 GHz Using Defected Microstrip Structure. International Journal of Applied Engineering Research, 11 (14). 8104 - 8108. ISSN 0973-9769
Nadlene , Razali (2016) The Effects Of Chemical Treatment On The Structural And Thermal,Physical, And Mechanical And Morphological Properties Of Roselle Fiber-Reinforced Vinyl Ester Composites. Polymer Composites. pp. 1-14. ISSN 1548-0569
Najmiah Radiah, Mohamad and Azahari, Salleh and Nik Mohd Zarifie, Hashim and Mohamad Zoinol Abidin, Abd Aziz and Zahriladha, Zakaria (2016) Modeling Of Wireless Energy Transfer Circuit And Implementation Of Wi-Tricity System Control Using Infrared And PIC Microcontroller. International Journal Of Engineering And Technology (IJET), 8 (2). pp. 1285-1294. ISSN 2319-8613
Naziatul Fazilah, Mohd Zalani and Sivakumar, Dhar Malingam and Mohd Zulkefli, Selamat (2016) Tensile Properties Of Woven Kenaf Fiber Reinforced Polypropylene Hybrid Aluminium-Composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608
Nazreen, Waeleh and Zanariah, Abdul Majid (2016) A 4-Point Block Method For Solving Higher Order Ordinary Differential Equations Directly. International Journal Of Mathematics And Mathematical Sciences, 2016. pp. 1-8. ISSN 0161-1712
Nik Azran, Ab Hadi (2016) Implementation And Effect Of Sensor Technology In Building Level Balancer Using Programmable Integrated Circuit Microcontroller. International Journal For Advance Research In Engineering And Technology, 3 (1). pp. 13-17. ISSN 2320-6802
Nizam Uddin, Ahamed and Mahdi, Alqahtani and Omar, Altwijri and Matiur, Rahman and Kenneth, Sundaraj (2016) Age-Related EMG Responses Of The Biceps Brachii Muscle Of Young Adults. Biomedical Research, 27 (3). pp. 787-793. ISSN 0970-938X
Noor Shahida, Mohd Kasim and Rosdiadee, Nordin and Mahamod, Ismail (2016) Dynamic Fractional Frequency Reuse Based On An Improved Water-Filling For Network MIMO. KSII Transactions On Internet And Information Systems, 10 (5). pp. 2124-2143. ISSN 1976-7277
Noor Shahida, Mohd Kasim and Rosdiadee, Nordin and Mahamod, Ismail (2016) Power Allocation For Dynamic Fractional Frequency Reuse (DFFR) In Downlink LTE-A System. 2015 21st Asia-Pacific Conference On Communications, APCC 2015. pp. 12-16. ISSN 978-488552301-4
Nor Azizah, Mohd Yusoff and Kasrul, Abdul Karim and Sharin, Ab Ghani and Fazlli, Patkar and Siti Azura, Ahmad Tarusan and Auzani, Jidin (2016) Analysis Of Multiphase Transformer Supplying A Static And Dynamic Load. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8987-8991. ISSN 1819-6608
Nor Syaimaa, Mohd Zamil and Hanim, Abdul Razak and Hazura, Haroon and Anis Suhaila, Mohd Zain and Fauziyah, Salehuddin and Siti Khadijah, Idris (2016) The Potential Of Silicon Photonic Device Based On Tapered MMI Structure. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 131-135. ISSN 2180-1843
Noraiham, Mohamad and Mazliah, Mazlan and Jeefferie, Abd Razak and Nur Sharafina, Zainol and Amirul Asyraf, Mat Nasir and Hairul Effendy, Ab Maulod (2016) Compressive Properties Of Green Rubber Foam From Reclaimed Rubber Glove. International Journal of Materials And Product Technology, 53 (3-4). pp. 252-266. ISSN 0268-1900
Noraini, Mat Ali and Kok, Swee Leong and Ain Atiqa, Mustapha (2016) Experimental Investigation On Piezoelectric And Electromagnetic Hybrid Micro-Power Generator. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6366-6370. ISSN 1819-6608
Norhafiz, Salim and Takao, Tsuji and Tsutomu, Oyama and Kenko, Uchida (2016) Interface Flow Limit Identification Using Focused Time Delay Network For MEPS Transmission. Smart Grid Technologies - Asia (ISGT ASIA), 2015 IEEE Innovative. pp. 1-6. ISSN 978-150901238-1
Norida, Abdullah and Olurotimi Adebayo, Shonubi and Rahman, Hashim and Norhidayu, Ab Hamid (2016) Recognition And Appreciation And Its Psychological Effect On Job Satisfaction And Performance In A Malaysia IT Company: Systematic Review. IOSR Journal Of Humanities And Social Science (IOSR-JHSS), 21 (9). pp. 47-55. ISSN 2279-0845
Norihan, Abdul Hamid and Majlis, Burhanuddin Yeop and Yunas, Jumril and Ahmad Radzi, Syafeeza and Wong, Yan Chiew and Ibrahim , Mazree (2016) A Stack Bonded Thermo-Pneumatic Micro-Pump Utilizing Polyimide Based Actuator Membrane For Biomedical Applications. Microsystem Technologies, 22 (5). pp. 1-9. ISSN 0946-7076
Norsiah, Hami and Mohd Razali, Muhamad and Zuhriah, Ebrahim (2016) The Impact Of Sustainable Manufacturing Practices On Sustainability. Jurnal Teknologi, 78 (1). pp. 139-152. ISSN 0127-9696
Nortazi, Sanusi and Azami, Zaharim and Sohif, Mat (2016) Wind Energy Potential: A Case Study Of Mersing, Malaysia. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7712-7716. ISSN 1819-6608
Nur Shazwani, Aminuddin and Syafeeza, Ahmad Radzi and M., Abu and Norihan, Abdul Hamid (2016) A Computer-Based Touch-Less 3D Controller Using Capacitive Sensing Method. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 83-88. ISSN 2180-1843
Nurhashikin, Mohd Salleh and Siti Rahayu, Selamat and Robiah, Yusof and Shahrin, Sahib (2016) Discovering Cyber Terrorism Using Trace Pattern. International Journal Of Network Security, 18 (6). pp. 1034-1040. ISSN 1816-353X
Nurul Akmal, Abd Salam and Wira Hidayat, Mohd Saad and Zahariah, Manap and Fauziyah, Salehuddin (2016) The Evolution Of Non-Invasive Blood Glucose Monitoring System For Personal Application. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 59-65. ISSN 2180-1843
Nurul Azuwa, Azmi and Umar Al-Amani, Azlan and Maziati Akmal, Mohd Hatta and Mohd Asyadi ‘Azam, Mohd Abid and Mohd Warikh, Abd Rashid (2016) A Study On (K, Na) NbO3 Thin Films With Optimized Layer: Effect On Physical And Electrical Properties. Key Engineering Materials, 694. pp. 120-124. ISSN 1662-9795
Nurul Izah, Anuar and Adi, Saptari (2016) Performance Evaluation Of Different Types Of Particle Representation Procedures Of Particle Swarm Optimization In Job-Shop Scheduling Problems. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-5. ISSN 1757-8981
Nurul Nadia, Abd Aziz and Hazura, Haroon and Hanim, Abdul Razak (2016) Compact Optical Filter Based On Microring Resonator. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3320-3323. ISSN 1819-6608
Nurzaimah, Zainol and Zahriladha, Zakaria and Maisarah, Abu and Mawarni, Mohamed Yunus (2016) Stacked Patch Antenna Harmonic Suppression At 2.45 GHz For Wireless Power Transfer. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 96-100. ISSN 978-147998252-3
Olawale Friday, Ifayefunmi (2016) Buckling Behavior Of Axially Compressed Cylindrical Shells: Comparison Of Theoretical And Experimental Data. Thin-Walled Structures, 98. pp. 558-564. ISSN 0263-8231
Omar Fouad, Mohammed and Burairah, Hussin and Abd Samad, Hasan Basari (2016) Operational design and modelling of fire event tracking system in wireless sensor networks. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8525-8531. ISSN 1819-6608
Osman, Edynoor and Abd Rashid , Mohd Warikh and Abd Manaf, Mohd Edeerozey and Mohamad, Effendi and Salleh, Mohd Rizal and Ito, Teruaki and Moriga, Toshihiro (2016) Hygrothermal Effect on Mechanical and Thermal Properties of Filament Wound Hybrid Composite. Journal of Advanced Manufacturing Technology (JAMT) . pp. 1-12. ISSN 1985-3157
Piramli, Muhamad Marzuki and Abdul Rahman, Ahmad Fadzli Nizam and Abdullah, Siti Fairuz (2016) Rice Grain Grading Classification Based On Perimeter Using Moore-Neighbor Tracing Method. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 23-27. ISSN 2289-8131
Prajanto Wahyu, Adi and Farah Zakiyah, Rahmanti and Nor Azman, Abu (2016) High Quality Image Steganography on Integer Haar Wavelet Transform Using Modulus Function. 2015 International Conference On Science In Information Technology (ICSITech). pp. 79-84. ISSN 978-147998386-5
Qasem Ahmed, Sharif Ahmed and Husain, Mohd Nor and Zakaria, Zahriladha and Mohd Zin, Mohd Shahril Izuan and Alhegazi, Ammar (2016) Rectenna Designs For RF Energy Harvesting System : A Review. Journal On Communications Antenna And Propagation (IRECAP), 6 (2). 82 - 89. ISSN 2039-5094
Qasem Ahmed, Sharif Ahmed and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah (2016) Microstrip Antenna Design With Circular Polarization Property For RF Energy Harvesting Application. International Journal of Applied Engineering Research, 11 (6). 4398 - 4401. ISSN 0973-4562
Qumrul, Ahsan and Law, Mei Lin and Rose Farahiyan, Munawar and Noraiham, Mohamad (2016) Effect Of Recycled Carbon Fiber Reinforcement On The Wear Behavior Of Epoxy Composite. Journal Of Materials Research, 31 (13). pp. 1900-1907. ISSN 0884-2914
R. Sudha, Nair and Hanipah, Hussin (2016) Shaping The Curriculum: A Characteristics Approach And Its Impact On Teaching And Learning. Social Sciences, 11 (9). pp. 2054-2057. ISSN 1818-5800
Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Aparow, Vimal Rau and Jamaludin, Hishamuddin (2016) Simulation of Hybrid Electric Vehicle based on a Series Drive Train Layout. Jurnal Teknologi, UTM, 78 (6). pp. 211-221. ISSN 0127-9696
Raja Nor Firdaus Kashfi, Raja Othman and Farina, Sulaiman and Suhairi Rizuan, Che Ahmad and Kasrul, Abdul Karim and Auzani, Jidin and Tole, Sutikno and Norhisam, Misron (2016) Design Of Hollow-Rotor Brushless DC Motor. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 387-396. ISSN 2088-8694
Raja Nor Firdaus Kashfi, Raja Othman and Siti Zulaika , Mat Isa and Suhairi Rizuan , Che Ahmad and Nor Aishah, Md Zuki and Aziah , Khamis and Md Nazri , Othman (2016) Design A Slot-Less Linear Actuator For Food Processing Application. Journal Of Telecomunication Electronic And Computer Engineering, 8. pp. 87-91. ISSN 2180-1843
Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril (2016) Hydrogen Inlet Pressures Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3875-3882. ISSN 1819-6608
Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril and Mohamad Basir, Muhammad Sufyan Safwan (2016) Stack Temperature Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. Journal Of Scientific Research And Development, 3 (5). pp. 63-68. ISSN 1115‐7569
Redzuan , Abdul Manap (2016) Nonparametric Quality Assessment Of Natural Images. IEEE Multimedia, 23. pp. 22-30. ISSN 1070-986X
Ridhwan , Jumaidin (2016) Characteristics Of Thermoplastic Sugar Palm Starch/Agar Blend: Thermal,Tensile,And Physical Properties. International Journal Of Biological Macromolecules, 89. 575–581. ISSN 0141-8130
Robiah, Yusof and Mohd Zaki, Mas'ud and Siti Rahayu, Selamat and Mohd Faizal, Abdollah and Shahrin, Sahib and Rudy Fadhlee, Mohd Dollah (2016) Formulating Generalize Malware Attack Pattern Using Features Selection. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3385-3390. ISSN 1819-6608
Roslan, Irda and Kawasaki, Takahiro and Nishiue, Toshiki and Takaki, Yumi and Ohta, Chikara and Tamaki, Hisashi (2016) Control Of Transmission Power And Carrier Sense Threshold To Enhance Throughput And Fairness For Dense WLANs. 2016 International Conference On Information Networking (ICOIN). pp. 51-56. ISSN 1976-7684
Rostam Affendi, Hamzah and Haidi, Ibrahim (2016) Literature Survey On Stereo Vision Disparity Map Algorithms. Journal Of Sensors, 2016. pp. 1-23. ISSN 1687-725X
Rozaimi, Ghazali (2016) Analysis Of 3D Gantry Crane System By PID And VSC For Positioning Trolley And Oscillation Reduction. Jornal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 139-143. ISSN 2180-1843
Rozaimi, Ghazali (2016) Controller Parameter Optimization For An Electro-Hydraulic Actuator System Based On Particle Swarm Optimization Technique. Jurnal Teknologi, 78 (1). 101–108. ISSN 0127-9696
Rozaimi, Ghazali (2016) The Effects Of Parameter Variation In Open-Loop And Closed-Loop Control Scheme For An Electro-Hydraulic Actuator System. International Journal Of Control And Automation, 9 (1). pp. 283-294. ISSN -
Rozaimi, Ghazali (2016) An Experimental Of 3D Gantry Crane System In Motion Control By PID And PD Controller Via PFPSO Optimization. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 133-137. ISSN 2180-1843
Rozaimi, Ghazali (2016) Optimization Of Sliding Mode Control Using Particle Swarm Algorithm For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 71-76. ISSN 2180-1843
Rozaimi, Ghazali (2016) PID Control Tuning Using PSO For Prosthetic Hand System. International Journal Of Applied Engineering Research, 11. pp. 10274-10280. ISSN 0973-4562
Rozaimi, Ghazali (2016) Parameter Estimation Technique Of Nonlinear Prosthetic Hand System. International Journal Of Engineering And Technology, 8. pp. 2161-2168. ISSN 2319-8613
Rozaimi, Ghazali (2016) Position Tracking Optimization For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 1-6. ISSN 2180-1843
Rozaimi , Ghazali (2016) Linear And Nonlinear Dynamic Modelling Of Motorized Prosthetic Hand System. Journal of Theoretical and Applied Information Technology, 93 (1). pp. 236-232. ISSN 1992-8645
Rozmi, Ismail and Mohamad Hanif, Md Saad and Mohd Jailani, Mohd Nor and Redzwan, Rosli (2016) Drivers’ Readiness To Use Car Driving Simulator As A Tool To Improve Driving Skill: A Preliminary Study. Jurnal Teknologi, 78 (6-9). pp. 137-142. ISSN 0127-9696
Ruslan, Mohd Shahfizal and Othman, Kamal and A Ghani, Jaharah and Kasim, Mohd Shahir and Che Haron, Che Hassan (2016) Surface Roughness Of Magnesium Alloy AZ91D In High Speed Milling. Jurnal Teknologi, 78 (6-9). pp. 115-119. ISSN 0127-9696
Sa'adah, Daud and Aida Fazliana, Abdul Kadir and Gan, Chin Kim (2016) The Impacts Of Distributed Photovoltaic Generation On Power Distribution Networks Losses. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 11-15. ISSN 978-146739572-4
Sabikan, S. and Nawawi, S.W. (2016) Open-Source Project (OSPs) Platform for Outdoor Quadcopter. Journal of Advanced Research Design, 24 (1). pp. 13-27. ISSN 2289-7984
Safarudin Gazali, Herawan and Abdul Hakim, Rohhaizan and Ahmad Faris, Ismail and Shamsul Anuar, Shamsudin and Azma, Putra and Musthafah, Mohd Tahir and Ardika Ridal, Awang (2016) Prediction On Power Produced From Power Turbine As A Waste Heat Recovery Mechanism On Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling And Simulation In Engineering, 2016. pp. 1-12. ISSN 1687-5591
Saiful Bahari, Nurul Iman and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Razali, Muhammad Fahmi and Sakidin, Hamzah and Mohamad Isa, Mohd Sa'ari (2016) Restoration Of Hazy Data Based On Spectral And Statistical Methods. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 6807-6813. ISSN 1819-6608
Saiful Bahari, Nurul Iman and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Sakidin, Hamzah and Razali, Muhammad Fahmi and Mohamad Isa, Mohd Saari (2016) Restoration of hazy satellite data based on spectral and statistical methods. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 6807-6813. ISSN 1819-6608
Saiful Izwan, Abd Razak and Izzati Fatimah, Wahab and Mohammed Rafiq, Abdul Kadir and Ahmad Zahran, Md Khudzari and Abdul Halim, Mohd Yusof and Farah Nuruljannah, Dahli and Nadirul Hasraf, Mat Nayan and T. Joseph Sahaya, Anand (2016) Biomimetic Growth Of Hydroxyapatite On Kenaf Fibers. BioResources, 11 (1). pp. 1971-1981. ISSN 1930-2126
Saifullah, Nasrullah and Zahriladha, Zakaria and Salleh, Azahari and Muhamad Fadzil, Muhamad Fadhli and Ab Rashid, Siti Rosmaniza and Jiim, Anthony Bruster (2016) Low Noise Amplifier Application Using Negative Feedback For Ultra-Wideband Applications. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3295 - 3299. ISSN 1819-6608
Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classic Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation (IJCA), 9 (4). pp. 301-312. ISSN -
Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classical Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation, 9 (4). pp. 301-312. ISSN 2005-4297
Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Safian, Mohd Azizul Hikmi and Yahaya, Saifudin Hafiz (2016) Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). p. 1. ISSN 1985-3157
Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326
Seha, Mohd Saffar and Fairul Azni, Jafar and Zamberi, Jamaludin (2016) Methodology On Investigating The Influences Of Automated Material Handling System In Automotive Assembly Process. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-10. ISSN 1757-8981
Sek, Yong Wee and McKay, Elspeth and Deng, Hepu (2016) The effect of learning preferences on learners' motivations: towards an ARCS motivational design in open learner models. 2015 IEEE Conference On e-Learning, e-Managernent And e-Services. pp. 52-57. ISSN 978-146739437-6
Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and YAAKOB, MOHD YUHAZRI and Azma, Putra and Sivakumar, Dhar Malingam (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2180-1606
Selamat, Mohd Zulkefli and Razi, Mashitah and Kasim, Ayu Natasya and Dhar Malingam, Sivakumar and Putra, Azma and Yaakob, Mohd Yuhazri and Mohd Daud, Mohd Ahadlin (2016) Mechanical properties of starch composite reinforced by pineapple leaf fiber (PLF) from josapine cultivar. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608
Selamat, Mohd Zulkefli and Sivakumar, Dhar Malingam and Azma, Putra and Ahadlin, Mohd Daud and Yuhazri, Yaakob (2016) MECHANICAL PROPERTIES OF STARCH COMPOSITE REINFORCED BY PINEAPPLE LEAF FIBER (PLF) FROM JOSAPINE CULTIVAR. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608
Seyed Ahmad, Shahahmadi and Ahmad Aizan, Zulkefle and A.K.M., Hasan and S.M., Rana and Badariah, Bais and Md D., Akhtaruzzaman and Abdul Rahman M., Alamoud and Nowshad, Amin (2016) Ge-rich SiGe thin film deposition by co-sputtering in in-situ and ex-situ solid phase crystallization for photovoltaic applications. Materials Science In Semiconductor Processing, 56. pp. 160-165. ISSN 1369-8001
Shafiee, Super and Mai Mariam, Mohamed Aminuddin and Hairulisam, Md Dom (2016) Comparison Of Meaningful Sound vs No Sound For Avoiding Attention Drifting Phenomenon While Driving. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 19-23. ISSN 2180-1843
Shafiei, Nuraini and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Mohd Firdaus, Mohd Ab Halim and Mohd Shahrieel, Mohd Aras and Arman Hadi, Azahar (2016) Development of Portable Air Conditioning System Using Peltier and Seebeck Effect. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) . pp. 97-100. ISSN 2180-1843
Shair, Ezreen Farina and Abdullah, Abdul Rahim and Tengku Zawawi , Tengku Nor Shuhada and Ahmad, S.A and Mohamad Saleh, Saleha (2016) Auto-Segmentation Analysis Of EMG Signal For Lifting Muscle Contraction Activities. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 17-21. ISSN 2180-1843
Shairi, Noor Azwan and Zakaria, Zahriladha and Zobilah, Abdullah Mohammed Saghir and Ahmad, Badrul Hisham and Wong , Peng Wen (2016) Design Of SPDT Switch With Transmission Line Stub Resonator For WiMAX And LTE In 3.5 Ghz Band. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3198-3202. ISSN 1819-6608
Shamshiri, Meysam and Gan, Chin Kim and Omar, Rosli (2016) MV/LV Distribution Networks Modelling Based On Malaysian Power Network Context. Indian Journal of Science and Technology, 9 (48). pp. 1-8. ISSN 0974-5645
Shamsul Akmar, Ab Aziz and Mohd Zaki, Nuawi and Mohd Jailani, Mohd Nor (2016) Development Of Noise And Vibration Exposure Monitoring System For Malaysian Army (MA) Three-Tonne Trucks. Jurnal Teknologi, 78 (6-10). pp. 9-15. ISSN 0127-9696
Shan, Sung Liew and Mohamed, Khalil-Hani and Syafeeza, Ahmad Radzi and Rabia, Bakhteri (2016) Gender Classification: A Convolutional Neural Network Approach. Turkish Journal Of Electrical Engineering and Computer Sciences, 24 (3). pp. 1248-1264. ISSN 1300-0632
Sharifah Sakinah, Syed Ahmad and Pedrycz, Witold (2016) The Development Of Granular Rule-Based Systems: A Study In Structural Model Compression. Granular Computing. pp. 1-12. ISSN 2364-4966
Sharin, Ab Ghani (2016) Dielectric Strength Improvement Of Natural Ester Insulation Oil:Optimization Of Mixed Antioxidants Via Two-Level Factorial Design. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 12798-12803. ISSN 1819-6608
Sharin , Ab Ghani (2016) A Study Of Moisture Effects On The Breakdown Voltage And Spectral Characteristics Of Mineral And Palm Oil-Based Insulation Oils. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 1-10. ISSN 1819-6608
Sidek, Safiah and Kudus, Norliah and Izharrudin, Siti Zakiah and Kamalrudin, Massila and Abu Hassan, Mahadi and Mohamed , Shahrulanuar (2016) Factors Influencing Internet Addiction Among University Students: A Review. Science International (Lahore), 28 (2). pp. 1343-1346. ISSN 1013-5316
Siti Adlina, Md Ali and Maisarah, Abu and Hasnizom, Hassan (2016) Dipole Antenna Backed By 8-CBU AMC-EBG And 8-CBU FSS At 5.8 GHz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 107-114. ISSN 2180-1843
Siti Azura, Ahmad Tarusan and Yusnida, Ahmad Tarmizi and Auzani, Jidin and Kasrul, Abdul Karim and Huzainirah, Ismail and R., Sundram and Muhd Khairi, Abd Rahim (2016) Constant Switching Frequency For Direct Torque Control Of Induction Motor. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 228-233. ISSN 978-146739572-4
Siti Fairuz, Abdullah and Ahmad Fadzli Nizam, Abdul Rahman and Zuraida, Abal Abas and Wira Hidayat, Mohd Saad (2016) Multilayer Perceptron Neural Network In Classifying Gender Using Fingerprint Global Level Features. Indian Journal Of Science And Technology (INDJST), 9 (9). pp. 1-6. ISSN 0974-6846
Siti Fatimah, Sulaiman and Mohd Fua’ad, Rahmat and Ahmad Athif, Mohd Faudzi and Khairuddin, Osman (2016) Linear And Nonlinear Arx Model For Intelligent Pneumatic Actuator Systems. Jurnal Teknologi, 78 (6). pp. 21-28. ISSN 0127-9696
Siti Halma, Johari and Khairul Azha, A. Aziz and Suziana, Ahmad and Khalil Azha, Mohd Annuar and Mahidzal, Dahari (2016) Model Based Controller And Observer For Boost Converter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 31-36. ISSN 978-147998598-2
Sivakumar, Dhar Malingam (2016) ECO-HYBRID COMPOSITE FAILURE BEHAVIOR OF TWO SERIAL BOLTED JOINT HOLES. Journal of Engineering and Technology, 7 (1). pp. 114-124. ISSN 2180-3811
Sivakumar, Dhar Malingam and Muhd Ridzuan , Mansor (2016) Selection of natural fibre reinforced composites using fuzzy VIKOR for car front hood. International Journal of Materials And Product Technology, 53 (3/4). pp. 267-285. ISSN 0268-1900
Soon, Allan Chan Roong and Chong, Shin Horng (2016) Laboratory-Scale Single Axis Solar Tracking System: Design And Implementation. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (1). pp. 254-264. ISSN 2088-8694
Soon, Allan Chan Roong and Chong, Shin Horng and Said, Mohamed Azmi (2016) 2-DOF Lead-Plus-PI Control Approach For Magnetic Levitation System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (11). pp. 35-40. ISSN 2180-1843
Soosay, Claudine and Nunes, Breno and John Bennett, David and Sohal, Amrik and Juhaini, Jabar and Winroth, Mats (2016) Strategies For Sustaining Manufacturing Competitiveness: Comparative Case Studies In Australia And Sweden. Journal Of Manufacturing Technology Management, 27 (1). pp. 6-37. ISSN 1741-038X
Subramonian, Sivarao and Sivakumar, Dhar Malingam (2016) Performance Evaluation of Reworked Weld Joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X
Suhana, Mohamed and Norsuridah, Shahdon and Rohana, Sham and Nooririnah, Omar and Aznilinda, Zainuddin and Raja Zuraidah, Raja Mohd Rasi (2016) A Case Study On Factors Influencing Credit Card Usage. Journal Of Applied Environmental And Biological Sciences, 6. pp. 38-42. ISSN 2090-4274
Sulaiman, Saiful Naim and Abu Shah, Ismail and Halim, Mohd Faizal and Tamin, Mohd Nasir (2016) Design And Development Of Auto-Steel Draw Forming Test Device. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 10977-10981. ISSN 1819-6608
Sundaraj, Kenneth and Sulaiman, Mohd Nazri and A. Qamarruddin, Fazilawati and Chee, Kiang Lam (2016) Virtual Phacoemulsification Surgical Simulation Using Visual Guidance And Performance Parameters As A Feasible Proficiency Assessment Tool. BMC Ophthalmology, 16 (88). pp. 1-9. ISSN 1471-2415
Sundaraj, Kenneth and W. Samsudin, Wan Syahirah and Ahmad, Amirozi and Salleh, Hasriah (2016) Initial Assessment Of Facial Nerve Paralysis Based On Motion Analysis Using An Optical Flow Method. Technology And Health Care, 24 (2). pp. 287-294. ISSN 0928-7329
Sundaraj, Kenneth and Ahamed, Nizam Uddin and Alqahtani, Mahdi and Altwijri, Omar and Rahman, Matiur (2016) Age-Related EMG Responses Of The Biceps Brachii Muscle Of Young Adults. Biomedical Research, 27 (3). pp. 787-793. ISSN 0970-938X
Sundram, Ramahlingam and Auzani, Jidin and Atikah, Razi and Muhd Khairi, Abd Rahim and Huzainirah, Ismail and Yusnida, Ahmad Tarmizi and Logan Raj, Lourdes Victor Raj (2016) Improve Torque Control Performance Of 3-Phase DTC Constant Switching Method Using Optimal PI Parameter Tuning Strategy. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 577-582. ISSN 978-146739572-4
Sundram, Ramahlingam and Auzani, Jidin and Azrita, Alias and Logan Raj, Lourdes Victor Raj and Atikah, Razi (2016) Improved Torque Control Performances Using Torque Error Modulator For Multilevel Inverter Based DTC Induction Motors. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 1-6. ISSN 978-147998598-2
Sundram, Ramahlingam and Auzani, Jidin and Tole, Sutikno (2016) A Novel Optimal PI Parameter Tuning Strategy To Improve Constant Switching Performance Of Direct Torque Control. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 422-430. ISSN 2088-8694
Suziana, Ahmad and Siti Halma, Johari and Mohd Firdaus, Mohd Ab Halim and Arfah, Ahmad (2016) Grid Connected Multilevel Inverters For PV Application. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 181-186. ISSN 978-147998598-2
Syafeeza, Ahmad Radzi and Kwan, Lik Hou and Syazana Itqan, Khalid and Norihan, Abdul Hamid and Wira Hidayat, Mohd Saad and Zahariah, Manap (2016) A Low Cost Finger-Vein Capturing Device. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3330-3335. ISSN 1819-6608
Syafeeza, Ahmad Radzi and Mohamed, Khalil-Hani and Rabia, Bakhteri (2016) Finger-Vein Biometric Identification Using Convolutional Neural Network. Turkish Journal Of Electrical Engineering and Computer Sciences, 24 (3). pp. 1863-1878. ISSN 1300-0632
Syariffah, Othman and Mohd Ruddin, Ab Ghani and Mohamad Rom, Tamjis (2016) Improvement Of Energy Collection In A Solar System. International Journal of Applied Engineering Research, 11 (14). pp. 8136-8139. ISSN 0973-4562
Syarulnaziah, Anawar and Saadiah, Yahya and Zakiah, Ayop and Andita Suci, Pratiwi (2016) Progress-Based Strategy For User Engagement In mHealth Participatory Sensing. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6309-6314. ISSN 1819-6608
Syazana Itqan, Khalid and Syafeeza, Ahmad Radzi and Gong, Fook Guan and Nur Badariah Ahmad, Mustafa and Wong, Yan Chiew and M. M., Ibrahim (2016) User Identification System Based On Finger-Vein Patterns Using Convolutional Neural Network. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3316-3319. ISSN 1819-6608
Syazana Itqan, Khalid and Syafeeza, Ahmad Radzi and Norhashimah, Mohd Saad (2016) A MATLAB-Based Convolutional Neural Network Approach For Face Recognition System. Journal Of Bioinformatics And Proteomics Review, 2 (1). pp. 1-5. ISSN 2381-0793
Syed Hussien, Sharifah Yuslinda and Ghazali, Rozaimi and Jaafar, Hazriq Izzuan and Chong, Chee Soon (2016) Robustness Analysis For PID Controller Optimized Using PFPSO For Underactuated Gantry Crane System. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 520-525. ISSN 978-147998252-3
Taher, Mohd Fahmi and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Mohd Aras, Mohd Shahrieel and Azahar, Arman Hadi and Zainal Abidin, Amar Faiz (2016) Development of Autonomous Sweeper Robot for Badminton Court. Journal of telecommunication, electronic and computer engineering . pp. 129-133. ISSN 2180-1843
Talib, Elyas and Mohd Abid, Mohd Asyadi 'Azam (2016) An extensive study on carbon nanomaterials electrode from electrophoretic deposition technique for energy storage device. Journal Of Materials Research, 31 (13). pp. 1972-1982. ISSN 0884-2914
Tamjis, Mohamad Rom and Mat Hanafiah, Mohd Ariff and Ahmad Aizan, Zulkefle and Ibrahim, Mazree and Syed Salim, Syed Najib and Ab. Ghani, Mohd Ruddin and Ab.Rahman, Puteri Nur Suhaila and S. N. M. Shahril and Ahmed, Dawood Saleem and Mohamed Khairuddin, Mohamed Syafiq Akmal and Baharudin, Zikri Abadi and Abdul Rahman, Ahmad Idil and Zainon, Maslan and Abu Shah, Ismail and Mohd Ibrahim, Imran and Raja Abd Rahman, Raja Roslan and Wan Adnan, Wan Azizun (2016) Permeance based algorithm for computation of flux linkage characteristics of non-linear 6/4 Switched Reluctance Motor (SRM). ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8897-8901. ISSN 1819-6608
Tang, Bin and Brennan, Michael John and Vicente, Lopes Jr and Samuel, da Silva and Ramlan, Roszaidi (2016) Using nonlinear jumps to estimate cubic stiffness nonlinearity: An experimental study. Proceedings Of The Institution Of Mechanical Engineers, Part C: Journal Of Mechanical Engineering Science, 230 (19). pp. 3575-3581. ISSN 0022-2542
Tang, Teng Fong and Chong, Shin Horng and Tan, Ming Hui and Chan, Chun Yuan and Sato, Kaiji (2016) Characterization Of Pneumatic Artificial Muscle System In An Opposing Pair Configuration. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 73-77. ISSN 2180-1843
Taufik, Afirah and Syed Ahmad, Sharifah Sakinah and Ahmad, Asmala (2016) Classification Of Landsat 8 Satellite Data Using NDVI Thresholds. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 37-40. ISSN 2180-1843
Tengku Zawawi , Tengku Nor Shuhada and Abdullah, Abdul Rahim and Halim, Isa and Shair, Ezreen Farina and Mohamad Saleh, Saleha (2016) Application Of Spectrogram In Analysing Electromyography (EMG) Signals Of Manual Lifting. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 3603-3609. ISSN 1819-6608
Tengku Zawawi , Tengku Nor Shuhada and Abdullah, Abdul Rahim and Shair, Ezreen Farina and Mohamad Saleh, Saleha (2016) Performances Comparison Of EMG Signal Analysis For Manual Lifting Using Spectrogram. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 29-34. ISSN 2180-1843
Thailis Bounya, Ngelayang and Low, Yin Fen and Rhonira, Latif and Burhanuddin Yeop, Majlis (2016) The evolution of research and development on cochlear biomodel. Jurnal Teknologi, 78 (6-8). pp. 83-92. ISSN 0127-9696
Toh, Cheng Chuan and Abdul Majid, Darsono and Mohd Shakir, Md Saat and Azmi, Awang Md Isa and Norlezah, Hashim (2016) Blind Source Separation On Biomedical Field By Using Nonnegative Matrix Factorization. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8200-8206. ISSN 1819-6608
Ummi Raba'ah, Hashim and Siti Zaiton, Mohd Hashim and Azah Kamilah, Muda (2016) Performance Evaluation Of Multivariate Texture Descriptor For Classification Of Timber Defect. Optik, 127 (15). pp. 6071-6080. ISSN 0030-4026
Vinodh, Annathurai and Gan, Chin Kim and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) Shading Analysis For The Siting Of Solar Pv Power Plant. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5021-5027. ISSN 1819-6608
W Azlan, Wan Amirah and Low, Yin Fen and Liew, Siaw Hong and Choo, Yun Huoy and Zakaria, Hazli (2016) Wavelet feature extraction and J48 decision tree classification of auditory late response (ALR) elicited by transcranial magnetic stimulation. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6319-6323. ISSN 1819-6608
Wee, Loon Lim and Antoni, Wibowo and Mohammad Ishak, Desa and Habibollah, Haron (2016) A Biogeography-Based Optimization Algorithm Hybridized With Tabu Search For The Quadratic Assignment Problem. Computational Intelligence and Neuroscience, 2016. pp. 1-12. ISSN 1687-5265
Win Adiyansyah, Indra and Nurulhalim, Hassim (2016) Real-Time Microwave Moisture Measurement Of Nickel Ore In Conveyor Applications. Jurnal Teknologi, 78 (6). pp. 111-115. ISSN 0127-9696
Wong, Yan Chiew (2016) Adaptive Impedance Tuning Network Using Genetic Algorithm: ITUNEGA. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8. pp. 55-60. ISSN 2289-8131
Wong, Yan Chiew and Mahmod , Mazlina and Ahmad Radzi, Syafeeza and Abdul Hamid, Norihan (2016) Adaptive Boundary Impedance Matching Network Algorithm For Multi Frequency Standards RF Front-End. International Journal Of Electronics And Communications, 70 (10). pp. 1449-1456. ISSN 1434-8411
Wong, Yan Chiew and Mahmood, Mohd Najid and Mat Ibrahim, Masrullizam and Ahmad Radzi, Syafeeza and Hamid, Nor Nadiah Abdul (2016) Adaptive Impedance Tuning Network Using Genetic Algorithm : ITuneGA. Journal Of Telecommunication Electronic And Computer Engineering, 8 (5). pp. 55-60. ISSN 2180 – 1843
Wong, Yan Chiew and Tan, Pei Chee and Mat Ibrahim, Masrullizam and Ahmad Radzi, Syafeeza and Abdul Hamid, Norihan (2016) Dickson Charge Pump Rectifier Using Ultra-Low Power (ULP) Diode For Ban Applications. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (9). pp. 77-82. ISSN 2180-1843
Yogan, Jaya Kumar and Goh, Ong Sing and Halizah, Basiron and Ngo, Hea Choon and Puspalata, C Suppiah (2016) A Review On Automatic Text Summarization Approaches. Journal Of Computer Science, 12 (4). pp. 178-190. ISSN 1549-3636
Yusnida, Ahmad Tarmizi and Auzani, Jidin and Kasrul, Abdul Karim and Siti Azura, Ahmad Tarusan and Muhd Khairi, Abd Rahim and Sundram, Ramahlingam and Huzainirah, Ismail (2016) Investigation Of Torque And Flux-Current Producing Components In Indirect Rotor Flux Oriented Control (IRFOC) Of Induction Machines. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 539-544. ISSN 978-146739572-4
Yusop, Yusmarnita and Md Saat, Mohd Shakir and Sing, Kiong Nguang and Husin, Siti Huzaimah and Abd Ghani, Zamre (2016) Design Of Capacitive Power Transfer Using A Class-E Resonant Inverter. Journal Of Power Electronics (JPE), 16 (5). pp. 1678-1688. ISSN 1598-2092
Yusri, I and Md Ghazaly, Mariam and Rahmat, Mohd Fua'ad and Chong, Shin Horng and Ranom, Rahifa and Abdullah, Zulkeflee (2016) Effects Of Varying Arc Angles And Poles Numbers On Force Characteristics Of Switched Reluctance (SR) Actuator. International Journal of Mechanical and Mechatronics Engineering, 16 (5). pp. 41-47. ISSN 2077-124X
Yusri, Izzati and Md Ghazaly, Mariam and Ali Al-Andoli, Esmail Ali and Rahmat, Mohd Fua'ad and Zulkeflee, Abdullah and Md Ali, Mohd Amran and Ranom, Rahifa (2016) Optimization Of The Force Characteristic Of Rotary Motion Type Of Electromagnetic Actuator Based On Finite Element Analysis. Jurnal Teknologi , 78 (9). pp. 13-20. ISSN 2180-3722
Yusuf, Yusliza and Omar, Noor Irinah and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah (2016) A study on the corrosion and mechanical properties of duplex coating Ti6Al4V/TiAlBN. Transactions of the Institute of Metal Finishing, 94 (4). pp. 222-226. ISSN 0020-2967
Zainal, Iktisyam and Mohd Shahrieel, Mohd Aras and Muhammad Nizam , Kamarudin and Harun, Mohamad Haniff and Mohd Khairi , Mohd Zambri and Alias , Khamis and Anuar , Mohamed Kassim (2016) Design Process and Hydrodynamic Analysis of Underwater Remotely Operated Crawler. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) . pp. 35-39. ISSN 2180-1843
Zainal, Salam and Mohd Zulkifli, Ramli and Jubaer, Ahmed (2016) Comparative Study Of Software And Hardware Solutions For Partial Shading In PV System. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 480-485. ISSN 978-147998598-2
Zainal Abidin, Muhammad Zaimi and Azran, M.N and Khaizaki, M. and Alif, M. and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition in Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795
Zainal Abidin, Muhammad Zaimi and Azran, Mohd Nor and Muhamad, Khaizaki and M., Alifd and Abdul Aziz, Mohd Sanusi and Azam, Mohd Asyadi and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition In Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795
Zainal Abidin, Syazwani and Mohamad, Imran Syakir and Bani Hashim, Ahmad Yusairi and Abdullah, Norli and Md Isa, Mohamed Hafiz and Masripan, Nor Azmmi and Abdullah, Amirah (2016) Investigation of thermal characteristics of CNF-based nanofluids for electronic cooling applications. Journal of Mechanical Engineering and Sciences (JMES). 2336-2349. ISSN 2289-4659
Zainol, Nurzaimah and Zakaria, Zahriladha and Abu, Maisarah and Mohamed Yunus, Mawarni (2016) A Circularly Polarized Harmonic-Rejecting Antenna At 2.45 Ghz For Wireless Power Transfer. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3143 - 3146. ISSN 1819-6608
Zainol, Nurzaimah and Zakaria, Zahriladha and Abu, Maisarah and Mohamed Yunus, Mawarni (2016) Harmonic Suppression Rectangular Patch Antenna With Circularly Polarized. TELKOMNIKA, Telecommunication, Computing, Electronics And Control, 14 (2). 471 - 477. ISSN 2302-9293
Zainuddin, Hidayat and Ali, Mohd Basri and Muhammad Said, Nurlaela and Zakaria, Kamarul Ariffin (2016) Correlation Between Vertical Wheel Impact Energy With Lateral Wheel Impact Energy : A Finite Element Analysis Approach. International Journal of Automotive and Mechanical Engineering , 13 (3). pp. 3574-3583. ISSN 2229-8649
Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Ali, Mohd Basri (2016) Influence Of Elevated Temperature On The Fatigue Fracture Surface Hardness Of AA6061. Journal of Engineering and Applied Sciences, 11 (10). pp. 2130-2135. ISSN 1816-949X
Zakaria, Kamarul Ariffin and Jimit, Roy Hanson and Ramli , S.N.R. and Abdul Aziz, Azizuddin and Bapokutty, Omar and Ali, Mohd Basri (2016) Study on fatigue life and fracture behaviour of fibreglass reinforced composites. Journal of Mechanical Engineering and Sciences (JMES), 10 (3). pp. 2300-2310. ISSN 2289-4659
Zakaria, Zahriladha and Zainuddin, N. A and Husain, Mohd Nor and Mutalib, M. A and Amilhajan, Ena and Abdullah, M. S. K. and Sam, Weng Yik (2016) Optimum Desgin Of Rectifying Circuit With Receiving Antenna For RF Energy Harvesting. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3300 - 3304. ISSN 1819-6608
Zamani, Md Sani and Hadhrami, Abd Ghani and Loi, Wei Sen and Rosli, Besar (2016) Real-Time Daytime Road Marker Recognition Using Features Vectors And Neural Network. 2015 IEEE Conference On Sustainable Utilization And Development In Engineering And Technology (CSUDET). pp. 38-43. ISSN 978-147998612-5
Zamberi, Jamaludin and Jailani, Jamaludin and Chiew, Tsung Heng and Abdullah, Lokman and Rafan, Nur Aidawaty and Maharof, Madihah (2016) Sustainable Cutting Process For Milling Operation Using Disturbance Observer. Procedia CIRP, 40. pp. 486-491. ISSN 2212-8271
Zarina, Mohd Noh and Abdul Rahman, Ramli and M. Iqbal, Saripan and Marsyita, Hanafi (2016) Assessment Of Near Infrared LED Radiation Pattern Using Otsu Thresholding. 2015 IEEE Student Symposium In Biomedical Engineering And Sciences (ISSBES). pp. 1-6. ISSN 978-146737815-4
Zikri Abadi, Baharudin and Ahmad Idil, Abdul Rahman and M., Zainol and Mohamad Rom, Tamjis and Mohd Ariff, Mat Hanafiah and Mohd Ruddin, Ab Ghani and Lokman, Abdullah and Othman, Aman and Hassan, Adnan and Ahmad Aizan, Zulkefle and Ismail, Abu Shah and P. N. S. A. B., Rahman and M. R., Muhammad (2016) Cloud-To-Ground Lightning Flashes Under The Influence Of Pollution In Malaysia And Some Countries. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8893-8896. ISSN 1819-6608
Zobilah, Abdullah Mohammed Saghir and Shairi, Noor Azwan and Zakaria, Zahriladha and Jawad, M. S (2016) RF Switches In Wide-, Broad-, And Multi-Band Rf Front-End Of Wireless Communications: An Overview. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3244 - 3248. ISSN 1819-6608
Zul Hasrizal, Bohari and Mohd Hafiz, Jali and Mohamad Faizal, Baharom and Mohamad Na'im, Mohd Nasir and Nik Mohd Fariz, Mohd Nawi and Yasmin Hanum, Md Thayoob (2016) Transformer Mechanical Integrity Evaluation Via Unsupervised Neural Network (UNN) In Smart Grid Network. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 167-171. ISSN 978-147998252-3
Zulhani, Rasin and M.F., Rahman (2016) Control Of Bidirectional DC-DC Converter For Battery Storage System In Grid-Connected Quasi-Z-Source PV Inverter. 2015 IEEE Conference on Energy Conversion (CENCON). pp. 205-210. ISSN 978-147998598-2
Zulhisyam, Salleh and Marizan, Sulaiman and Rosli, Omar (2016) Tuning Fuzzy Membership Functions To Improve Performance Of Vector Control Induction Motor Drives. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 8 (2). pp. 1-4. ISSN 2180-1843
Zulkifilie , Ibrahim (2016) Harmonic Reduction Comparison In Multilevel Inverters For Industrial Application. Journal Of Theoretical And Applied Information Technology, 63. p. 570. ISSN 1992-8645
Book Chapter
Mohamed, Suhana and Sham, Rohana and Jaffar, Haliza Hirza and Latif, Ruziah A and Zaharum, Zaibedah and Zainal Abidin, Rabiatul Alawiyah and Mohd Hasan Abdullah, Norhasniza and Ahmad, Zuraidah and Md Don, Mohd Ali and Hassan, Sallaudin and Wan Mohamad, Wan Munirah and Raja Mohd Rasi, Raja Zuraidah and Omar, Nooririnah (2016) The Acceptance of Ar-Rahnu Scheme Among Rural Population. In: Regional Conference On Science, Technology And Social Sciences (RCSTSS 2014). Springer, Singapore, pp. 1-11. ISBN 9789811014567
Conference or Workshop Item
Mitan, Nona Merry M. and Razimi, Mohd Nur Shafiq Ahmad (2016) Potential co-processing of coconut shell and sugarcane residue as a solid biofuel. In: Mechanical Engineering Research Day 2016, 31 March 2016, Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka, Melaka, Malaysia.
Mohd Fadzli, Abdollah and Mohd Azli , Salim and Tee, Boon Tuan (2016) Proceeding Of Mechanical Engineering Research Day 2016 (MERD’16). In: https://books.google.com.my/books?id=YZfACwAAQBAJ, 31 March 2016, Kampus Teknologi, Universiti Teknikal Malaysia Melaka (UTeM).
Phuman Singh, Amrik Singh and Nishihara, Osamu (2016) Nondimensionalized Indices for Collision Avoidance Based on Optimal Control Theory. In: FISITA 2016 World Automotive Congress, September 2016, Busan, Korea.
Phuman Singh, Amrik Singh and Nishihara, Osamu (2016) Obstacle Avoidance by Steering and Braking with Minimum Total Vehicle Force. In: 13th IFAC Symposium on Analysis, Design, and Evaluation of Human-Machine Systems HMS 2016, 30 August - 2 September 2016, Kyoto, Japan.
Rosley, Mohammad Nazry and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Zakaria, Muhammad Zulfattah and Mat Yamin, Ahmad Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine. In: The 4th International Conference on Engineering and ICT (ICEI 2016), 4 April 2016 - 6 April 2016, Hatten Hotel Melaka. (Submitted)
Sardi, Junainah and Mithulananthan, Nadarajah and Hung, Duong Quoc (2016) A loss sensitivity factor method for locating ES in a distribution system with PV units. In: IEEE PES Asia-Pacific Power And Energy Engineering Conference, APPEEC 2015, 15-18 November 2015, Brisbane Convention And Exhibition CentreBrisbane; Australia.
Sarkawi, Hafez and Yoshito, Ohta (2016) Optimal state-feedback and proportional-integral controller performance comparison for DC-DC Zeta converter operating in continuous conduction mode. In: Proceedings of the SICE Annual Conference 2016, 20-23 September 2016, Tsukuba, Japan.
Selamat, Mohd Zulkefli and Muhammad Yusri , Md Yusuf and Sivakumar, Dhar Malingam (2016) Effect of formation temperature on properties of graphite/stannum composite for bipolar plate. In: none, none, none.
Selamat, Mohd Zulkefli and Sivakumar, Dhar Malingam (2016) Effect of carbon nanotubes loading in multifiller polymer composite as bipolar plate for PEM fuel cell. In: 5th International Conference on Recent Advances in Materials, Minerals and Environment, 4-6 August 2015, Penang, Malaysia.
Sivakumar, Dhar Malingam and Muhd Ridzuan , Mansor (2016) Thermoplastic matrix selection based on entropy method for importance weight of criteria. In: MERD 15, none, UTeM.
Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and Tan, CheeFai (2016) Failure analysis of two serial holes bolted joint hybrid composite. In: MERD 2016, none, UTeM.
Sivakumar, Dhar Malingam and Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and Tan, CheeFai (2016) Failure analysis on hybrid fiber reinforced plastics for bolted joint under geometric parameters effect. In: MERD 15, none, UTeM.
Book
Mohamad, Siti Nurul Mahfuzah and Bakar, Norasiken (2016) Cara mudah belajar photoshop. Percetakan Bumi Restu Sdn. Bhd., Johor Bahru. ISBN 9789834901714
Thesis
A. Ghani, Hilmiah (2016) Influences Of Neodymium Magnet Configurations On The Stiffness Of A Vibration Based Energy Harvesting Device. Masters thesis, Universiti Teknikal Malaysia Melaka.
A. Hassan, Mohsin (2016) Structural analysis of shape-morphing aircraft slat by using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.
AL-Dabbagh, Minah Mohammed Fareed Abd-A (2016) Axial crushing of thin-walled tube with hole under quasi-static loading. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ab Hamid, Nur Faiqah (2016) Gamification For Improving Student Engagement In Software Engineering Subject : A Case Study In UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ab Wahab, Yuseni (2016) Enhanced Snapshot With Intelligent Optimal Replacement Model For Hostel Maintenance Management Based On Failure Data. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ab. Latif, Nurain Shyafina (2016) Sound Radiation From Vibrating Plate With Different Boundary Conditions Using Discrete Source Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abbas, Adnan Jameel (2016) Predictive modelling of machining parameters of S45C mild steel. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abd Rahim, Ahmad Shahizam (2016) Development Of Nanofiber-Coated Cabin Air Filter For Enhancing Filtration Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abd Rahim, Yahaya (2016) Hybrid Anonymization Technique For Improving The Privacy In Network Data. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abd Rahman, Asrul (2016) Development Of Controller For Prosthetic Leg Using PID Method. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abd. Rahim, Toibah (2016) Fabrication Of Cold Spray Ti-O Coatings Engineered From Agglomerated Powders. PhD thesis, Universiti Teknikal Malaysia Melaka.
Abdelrafe M.S., Elzamly (2016) Managing Software Project Risks Using Stepwise And Fuzzy Regression Analysis Modelling Techniques. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abdul Aziz, Helwana Adilah (2016) The Evaluation Of Mobile Educational Jawi Games For Kids 3-5 Years Old. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdul Hadi, Mohammad Hairi (2016) Isolation Performance Improvement Using Defected Ground Structure In RF Switch. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdul Hamid, Nor Nadiah (2016) Preparation And Characterization Of Natural Rubberchitson Biodegradable Urea For Slow Release Fertilizer. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdul Jabar, Ahmad Khairil (2016) Assessment On Sustainability Of Cocoyam For Heavy Metal Removal In Industrial Wastewater. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdul Latiff, Roziah (2016) Establishing System Quality In Accredited Biomedical Calibration Laboratory. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdul Mutalip, Zaiton (2016) Investigation Of Optical Wireless For Employment Within A Vehicular Environment. PhD thesis, Universiti Teknikal Malaysia Melaka.
Abdul Rahim, Nor Azahana (2016) A Study On The Effectiveness Of Using Problem Based Learning (PBL) In Web Based Components Of Wireless Network Subject. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdul Rahim, Nur Hidayu (2016) Signature Of Unwanted Signal Due To Induced Voltage at PV Solar By Lightning Strike. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdul Rasib, Amir Hamzah (2016) Operational Performance Of Automotive Parts Assembly Processes Using Production Capacity Loss Equation. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abdullah, Muhammad Ilman Hakimi Chua (2016) Optimization Of Boron-Based Nanolubricant For Diesel Engine. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abdullah, Raihana Syahirah (2016) New P2P Botnets Classification And Detection Framework. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abdullah, Siti Fairuz (2016) Classification Of Gender Using Global Level Features In Fingerprint For Malaysian Population. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdullah Al Habshi, Syed Muhammad S (2016) Influence Of Non-Uniform Number Of Turns Per Coils And Stator Geometry On Unbalanced Magnetic Force In Brushless Permanent Magnet Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdulraheem, Bashar Sabeeh (2016) Modelling And Analysis Of The Dynamic Behavior Of Power System During Large-Scale Contingency. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abdulzahra, Ali Abdulhassan (2016) Studies Between Clarke Transformation And Symmetrical Components For Fault Analysis Of Power Distribution System Using PSCAD. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abu, Fairus (2016) A Study On Adoption Of Technology In SMEs Food Industry : UTAUT Model. Masters thesis, Universiti Teknikal Malaysia Melaka.
Abu Hasim, Ahmad Shukri (2016) Shunt Active Power Filter Employing Kalman Filter Estimator For Harmonics Reduction. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abu Samah, Khyrina Airin Fariza (2016) Modelling Autonomous Evacuation Navigation System (AENS) For Optimal Route Using Dijkstra's Algorithm. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Abu Zarim, Nor Azimah (2016) Android Based Dyslexia Early Screening Test. Masters thesis, Universiti Teknikal Malaysia Melaka.
Adanan, Nur Qurratul Ain (2016) Integration of six-sigma and Kaizen approached for ball pin quality improvement in Malaysia haberdarshey industry. Masters thesis, Universiti Teknikal Malaysia Melaka.
Affandi, Rosnani (2016) Modeling, Simulation And Feasibility Study Of The Parabolic Dish System Under Malaysia Environment. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ahmad, Ibrahim (2016) Kesan Afektif Dan Emosi Pengguna Terhadap Model Kerangka Reka Bentuk Antara Muka Permainan Komputer (RAPK). PhD thesis, Universiti Teknikal Malaysia Melaka.
Ahmad, Intan Fatihah (2016) Effect Factors Of Psychophysical And Biomechanical Of Upper Quadrant Musculoskeletal Disorder Among Young Drivers. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ahmad, Nur Sumayyah (2016) Voltage Source Inverter Switches Faults Classification And Identification Using Time-Frequency Distributions. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ahmad, Nurul Aini (2016) An Integrative Model Of Responsiveness And Sustainability Requirements For Automotive Industry. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ahmad Azamud-din, Wan Muhammad Hazwan (2016) Enhancement Quality Of Service At ADTECBP LAN Using Traffic Policing. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ahmed, Dawood Saleem (2016) Impact Of Distributed Generation On Power System Protection. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ajmi, Ahmed Ali (2016) Study And Analysis The Impact Of Temperature In Turbine Room On The Performance Of Workers In Power Station. Masters thesis, Universiti Teknikal Malaysia Melaka.
Akbar, Habibullah (2016) 3D Intrinsic scene characteristics extraction framework for a single image. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Akin, Aisyah Gwynnie Chembat (2016) Energy analysis for lighting system in academic building - case study in IKM Bintulu. Masters thesis, Universiti Teknikal Malaysia Melaka.
Al-Ahnomi, Rammah Ali Hussien (2016) A Novel Microwave Sensor With High-Q Resonator For High Sensitivity Material Characterization. Masters thesis, Universiti Teknikal Malaysia Melaka.
Al-Ani, Mustafa Khudhur Hussein (2016) Greening the existing building (Chancellery Building - Universiti Teknikal Malaysia Melaka). Masters thesis, Universiti Teknikal Malaysia Melaka.
Al-Edreesi, Istabraq Sabah Naser (2016) Identification Of The Electronic Information Sharing Influence Factors That Affect The Participation Behavior Of The Employee. Masters thesis, Universiti Teknikal Malaysia Melaka.
Al-Khafaji, Omar Abdul Hassan Lafta (2016) Lateral Crushing Of Circular Ring Tube Under Quasi-Static Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.
Al-Nasrawi, Hayder Saad Oleiwi (2016) Tribological Studies Of Bio-Lubricant Under High Loading Capacity. Masters thesis, Universiti Teknikal Malaysia Melaka.
Al-Shami, Samer Ali (2016) The Role Of Microcredit Financing On Women Empowerment In Malaysia. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ali, Muhammad Syahir (2016) Pre Chamber For Performance Improvement Using Compressed Natural Gas In Single Cylinder Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.
Amir, Alifh Omar (2016) Two Stroke Swivel Motion Engine Simulation Using Lotus Engine Software. Masters thesis, Universiti Teknikal Malaysia Melaka.
Amir, Mohd Zubir (2016) Development Of Steer-By-Wire (SBW) Controller System For Steering Respone. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ang, Teoh Ong (2016) Computer Vision Inspection And Classification On Printed Circuit Boards For Flux Defects. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ani, Mohammad Firdaus (2016) Developing Regression Models Of Driver Fatigue Using An Ergonomics Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.
Anuar, Ammar (2016) Adaptive Traffic Prioritization Algorithm Over Ad Hoc Network Using IEEE 802.11e. Masters thesis, Universiti Teknikal Malaysia Melaka.
Arbain, Nur Atikah (2016) Improving Triangle Geometry Shape Features Through Triangle Points Selection In Digit Recognition. Masters thesis, Universiti Teknikal Malaysia Melaka.
Arshad, Norsuhaidah (2016) Fault Analysis And Test For Bridge Defect In Resistive Random Access Memory. Masters thesis, Universiti Teknikal Malaysia Melaka.
Augustine, Noel Francisco (2016) Productivity improvement for visual inspection using lean concept a case study at front of line process. Masters thesis, Universiti Teknikal Malaysia Melaka.
Azidin, Farid Arafat (2016) Energy Management System For Three-Wheel Light Electric Vehicle Using Multi-Sources Energy Models. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Aziz, Nur Arba'ayah (2016) Study and change of material on autovision machine unit stopper. Masters thesis, Universiti Teknikal Malaysia Melaka.
Azman, Hazwani (2016) X-band spanar antenna for heart rate monitoring system. Masters thesis, Universiti Teknikal Malaysia Melaka.
Badr Aldeen, Badr Abdallah (2016) Business intelligence tool analysis and exploration of Attendance Management System (AMS) using Auto Regression TREE (ART). Masters thesis, Universiti Teknikal Malaysia Melaka.
Bashier, Nur Sahidah (2016) Development and evaluation of science courseware through puzzle-based game : Funtime learning science. Masters thesis, Universiti Teknikal Malaysia Melaka.
Bong, Yu Jing (2016) Design And Characterization On Piezoelectric Cantilever As A Self-Powered Accelerometer. Masters thesis, Universiti Teknikal Malaysia Melaka.
Chan, Swee Guan (2016) Development on copper to copper bonding optimization on low-k structure integrated circuit device. Masters thesis, Universiti Teknikal Malaysia Melaka.
Che Ku Mohd, Che Ku Nuraini (2016) Practical Learning Styles Approach On Personalised Learning Environment (PLE). Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Cheah, Chin Puay (2016) Bottom up cost estimation model for project management in semiconductor industry. Masters thesis, Universiti Teknikal Malaysia Melaka.
Cheah, Yee Mun (2016) Modeling Of Vibration Transmission And Prediction Of Structure-Borne Noise In Buildings. Masters thesis, Universiti Teknikal Malaysia Melaka.
Dahlan, Ainol Suhada (2016) Automatic tyre pressure replenishing system development assisted by mathematical modelling and finite element analysis. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Dominic Merikan, Bonny Jinggut (2016) Simulation of PV solar coconut dehusking machine. Masters thesis, Universiti Teknikal Malaysia Melaka.
Edris, Muhammad Zuhair Bolqiah (2016) Automated Deform Detection For Automotive Body Panels Using Image Processing Techniques. Masters thesis, Universiti Teknikal Malaysia Melaka.
Fatahurahman, Noor Atiqah (2016) Enhancing Performance Of WLAN At KPTM Batu Pahat Using Channel Assignment. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ganesen, Linggeswaran (2016) Quality improvement of phase noise in signal anayzer product a case study in electronic industry. Masters thesis, Universiti Teknikal Malaysia Melaka.
Habeeb, Hiyam Adil (2016) Study On The Mechanical Properties Of Natural PLA And PLA Composites Fabricated By 3D Printing. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hambaran, Omar Mukhtar (2016) Hybrid Software Architecture For Doctor-Patient Consultation. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hamid, Nurul 'Atiqah (2016) New Fast Block Matching Algorithm Using New Hybrid Search Pattern And Strategy To Improve Motion Estimation Process In Video Coding Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hanaffi, Farhan (2016) Grounding Grid Design For High Voltage Substation : An Assessment Of Effectiveness For Lightning Current. PhD thesis, Universiti Teknikal Malaysia Melaka.
Haris, Sharil Izwan (2016) Position Tracking Control Of Slider Crank Mechanism Using Fuzzy PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hasan, Nor Halim (2016) Development Of Performance Standard For Circular Ducting Local Exhaust Ventilation System At Workplace. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Hasbullah, Nor Wahida (2016) Waste Reduction In Healthcare Department By Implementing Value Stream Mapping Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hashim, Hadi Fakhir (2016) Design And Analysis Of A Series Active Power Filter Based On Hysteresis Controller For Power Quality Improvement. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hashim, Muhammed Noor (2016) An Optimization Of Drag Reduction Of An Automotive Roof Box. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hassan, Nornikman (2016) Enhancement Performance Of Split Ring Resonator Structure On Microstrip Patch Antenna. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Hee, Wai Keat (2016) Design And Analysis On The Robust Control Of A X-Y Ballscrew Mechanism. Masters thesis, Universiti Teknikal Malaysia Melaka.
Heng, Soo Ann (2016) Improvement of molding process scheduled downtime reduction for integrated circuits package DPAK STS. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ho, Chee Huay (2016) Lean manufacturing and OEE optimization of semiconductor industry through scheduled downtime reduction at testing process. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hossain, Md Liton (2016) Multilevel Three Phase Voltage Source Inverter With Simple Space Vector Pulse Width Modulation. Masters thesis, Universiti Teknikal Malaysia Melaka.
Husin, Mohd Amirhafizan (2016) Effects of fiber reinforcements weave patterns on the mechanical properties of hybrid intraply lamina. Masters thesis, Universiti Teknikal Malaysia Melaka.
Hussein, Sadiq Aziz (2016) The Process Parameter Effects On Hybrid Structure Of Dissimilar Materials Made By Friction Stir Welding. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Hussein, Saif Tahseen (2016) Dynamic Economic Dispatch For Power System. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ibrahim, Abdiwahab Abshir (2016) Development Of A New Environmental Framework For Manual Wheelchair Using Analytical Hierarchy Process (AHP) In Product Development. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ibrahim, Azhar (2016) Antilock bracking system control using fractional gain PID controller. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ibrahim, Mimi Dalina (2016) The Readiness Level On Conducting Penetration Testing Among Network Admin In Kolej Poly Tech Mara. Masters thesis, Universiti Teknikal Malaysia Melaka.
Idris, Syahril Anuar (2016) Development Of Pipeline Corrosion Inspection System Using Machine Vision. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ismail, Mohd Khairy (2016) Design And Analysis Of Modified-Proportional Fair Scheduler For LTELTE-Advanced. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ismail, Nurul Atiqah (2016) Accurate Real Time Detection For Halal Logo Based On Fourier Magnitude Method. Masters thesis, Universiti Teknikal Malaysia Melaka.
Jaber, Mustafa Musa (2016) Investigating the key factors effecting the use of telemedicine in Iraqi Hospitals. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Jamalulil, Nur Halimah (2016) Implementation Of Quick Response (QR) Code In Cloud Manufacturing (CM) Framework. Masters thesis, Universiti Teknikal Malaysia Melaka.
Jayahkudy, Raguvaran (2016) Application Of Bio-Glycol To Inhibit Natural Pressure Loss In Automotive Tyre. Masters thesis, Universiti Teknikal Malaysia Melaka.
Jiga, Iviana (2016) Online Booking Systems To Manage Queue At Road Transport Department. Masters thesis, Universiti Teknikal Malaysia Melaka.
Juanna, Beh Jen Ann (2016) The Development Of Responsive Kid-Friendly Web Framework (Kidsstyle). Masters thesis, Universiti Teknikal Malaysia Melaka.
Jumaat, Faizal Azli (2016) Investigation On The Mechanical Properties Of Hybrid Fibre Metal Laminate. Masters thesis, Universiti Teknikal Malaysia Melaka.
Jumali, Muhammad Syafik (2016) The Influence Of Tool Geometry Towards Cutting Performance On Aluminium 7075. Masters thesis, Universiti Teknikal Malaysia Melaka.
Jurifa, Mat Lazi (2016) Sensorless and independent speed control of dual-PMSM drives using five-leg inverter (FLI). Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Juwara, Luqman Nul Hakim (2016) The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process. Masters thesis, Universiti Teknikal Malaysia Melaka.
Kadhim, Ghassan Jawad (2016) Water Treatment Plants (WTPs) With High Efficiency Motors (HEMs) And Variable Speed Drives (VSDs). Masters thesis, Universiti Teknikal Malaysia Melaka.
Kadhim, Kamil Jawad (2016) Effect Of Coating Thickness On The Microstructure, Mechanical And Wear Properties Of A1TiN Coatings Deposited Using Arc Ion Plating Technique. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Kamal Bahrain, Safiza Suhana (2016) A Query-Driven Spatial Data Warehouse Conceptual Schema For Disaster Management. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Kamaruddin, Firdaus (2016) The Effectiveness Of Multimedia Coursewave In Typography Subject. Masters thesis, Universiti Teknikal Malaysia Melaka.
Kasdirin, Hyreil Anuar (2016) Adaptive Bio-Inspired Firefly And Invasive Weed Algorithms For Global Optimisation With Application To Engineering Problems. PhD thesis, Universiti Teknikal Malaysia Melaka.
Kassim, Dg Hafizah (2016) Study On Improving The Acoutics Performance Of Masjid Sayyidina Abu Bakar UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.
Khalaf, Aswaq Abdulameer (2016) Analysis Of Continuous And Discrete Control Systems Using PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.
Khaleel, Mohamed Adnan (2016) An Investigation Of Car Bumper With Respect To Impact Energy Absorption. Masters thesis, Universiti Teknikal Malaysia Melaka.
Khudhair, Ahmed Qays (2016) Physical-mechanical properties of palm kernel activated carbon-epoxy (PKAC-E) composite. Masters thesis, Universiti Teknikal Malaysia Melaka.
Latip, Ramlan (2016) Coordinated Control Of A Back-ToBack HVDC Link. Masters thesis, Universiti Teknikal Malaysia Melaka.
Law, Mei Lin (2016) Preparation And Characterization Of Recycled Carbon/Fibercarbon Nanotube Reinforced Epoxy Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.
Lee, Jun Wei (2016) Scaling Of MDOF Micro-Macro Bilateral Control Teleoperation System Using Standardized Modal Space. Masters thesis, Universiti Teknikal Malaysia Melaka.
Leong, Shu Teng (2016) Modelling And Characterization Of Stone Wool Fibre Reinforced High Density Polyethylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.
Liaw, Geok Pheng (2016) Temperature Control And Investigation Of Parabolic Dish Based Concentrating Solar Power (CSP) In Malaysia Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.
Liew, Siaw Hong (2016) EEG-Based Person Authentication Modelling Using Incremental Fuzzy-Rough Nearest Neighbour Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.
Lim, Kean Teik (2016) Solder paste printing yield improvement for SMT ultra fine pitch product by using six sigma technique. Masters thesis, Universiti Teknikal Malaysia Melaka.
Lim, Poh Siong (2016) A Financial Analysis To Identify Constraint Tools And Its Operational Impacts. Masters thesis, Universiti Teknikal Malaysia Melaka.
Lim, Si Qing (2016) Design And Analysis Of Auto Security Door Locking System. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ludan, Shamila Sandhu (2016) Solar Thermal Water Heater Requirements For Typical Malaysian House. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mahamood, Mazlin Aida (2016) Optimisation And Characterisation Of Functionalised Graphene Nanoplatelets Filled NR/EPDM Nanocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mahmood, Noor Shakir (2016) Improve The Performance Of Electricity Power Production By Adopting ISO 50001 In The Iraqi Ministry Of Electricity. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mas'od, Siti Nor Rafidah (2016) Consumers' Attitude Towards Online Shopping : The Affecting Of Recommendation Agents. Masters thesis, Universiti Teknikal Malaysia Melaka.
Maslan, Mohammad Haidir (2016) Development Of Predictive Finite Element Models For Complete Contact Fretting Fatigue. PhD thesis, Universiti Teknikal Malaysia Melaka.
Mat, Shafizal (2016) Employee Motivation And Learning Behaviours In Selected Manufacturing Industries. PhD thesis, Universiti Teknikal Malaysia Melaka.
Mat Nawi, Nor Afifah (2016) Enhancement Of Traffic Collision Avoidance Using Token Bucket Algorithm. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mat Tahir, Noor Ayuma (2016) Tribological Performances For Palm Kernel Activated Carbon Epoxy Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mat Zin, Nurul Halwanie (2016) Design a manual calf massager for prolonged standing worker by using ergonomic approach. Masters thesis, Universiti Teknikal Malaysia Melaka.
Md Jamal, Norezmi (2016) Self-Frequency Tracking High-Frequency Class E Resonant Inductive Links For Wireless Power Transfer Application. Masters thesis, Universiti Teknikal Malaysia Melaka.
Md Leza, Fathin Nabilla (2016) Improving Complete Access To Data Within Collaborative Systems In Healthcare Domain. Masters thesis, Universiti Teknikal Malaysia Melaka.
Md. Nafiah, Mohd Rozaini (2016) Experimental investigation of top compression piston ring morphology for hydrogen enrichment diesel engine. Masters thesis, Universiti Teknikal Malaysia Melaka.
Md. Sukardi, Mohd Saiful (2016) Active front steering for passenger vehicle using fuzzy PID method. Masters thesis, Universiti Teknikal Malaysia Melaka.
Md. Yusop, Azdiana (2016) Sistem Penuaian Tenaga Hibrid Termoelektrik-Suria Menggunakan Pembentuk Masukkan Analisis Dinamik Songsang. PhD thesis, Universiti Teknikal Malaysia Melaka.
Mihat, Mohammad Fariq (2016) The Effectiveness Study On User Interface Design (UID) For Local Cosmetic Website By Apllying Theories Of Aesthetics. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohamad, Norizan (2016) Design Of Spring-Supported Diaphragm Capacitive MEMS Microphone. PhD thesis, Universiti Teknikal Malaysia Melaka.
Mohamad Salleh, Mohamad Fazli (2016) Study And Analysis Of Power Attenuation Due To Optical Bend Loss In OPGW Overhead Transmission In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohamad Shokri, Ahmad Sayuthi (2016) Pembangunan Analisis Gerakan Mata Secara Automatik Bagi Sistem ROBII TX 300. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohamad Yatim, Norazlina (2016) Functionalized Multiwall Carbon Nanotubes For Efficiency Enhancement Used Of Nitrogenous Fertilizer In Paddy. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Mohammad, Raed Ali (2016) The Biomechanical Effect Of Human Weight On Spinal Facet Joints Using Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohammad Othman, Morad Yousef (2016) Cloud Computing Adoption Model For Higher Education : A Comparison Study Between Malaysia And Jordan. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohan, Ahmed Esmael (2016) Laboratory-Scale And Real Experimental Study On The Performance Of Energy Regenerative Suspension System. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Arshad, Nor Amirah (2016) Order Pattern Prediction Using Artificial Intelligence In An Inventory System Design. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Azlim, Mastura (2016) A Framework On Collaborative Learning Activities To Actively Engage Students In Learning Management System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Mohd Ghazali, Athirah (2016) Develop a regression model for relationship between psychophysical and biomechanics factors of push activities. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Husin, Mohd Haizal (2016) Study On Copper Incorporated Mesoporous Silica SBA-15 For N2O Catalytic Decomposition. PhD thesis, Universiti Teknikal Malaysia Melaka.
Mohd Nawawi, Nurul Husna (2016) Optimisation of cutter geometrical feature for machining orthopedic, trauma and spinal biomaterials implant. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Noh, Mohd Zakaria (2016) GMAW Parameters Effects On Microstructural And Mechanical Properties Of TOW SS304 And BS1387. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Rosli, Mohd Afzanizam (2016) Pembangunan Dan Kajian Prestasi Lapangan Pengumpul Polimer Dan Fotovoltan Terma (PVT) Polimer Di Malaysia. PhD thesis, Universiti Teknikal Malaysia Melaka.
Mohd Tahir, Mohd Hirzarul Hafiz (2016) Improvement of mold ability and wire sweep in semiconductor devices using DOE statistical approach. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Yaacob, Noorayisahbe (2016) A Framework For Accessing Patient Health Records Using Information Communication Technology Devices. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Yunos, Ahmad Syafiq (2016) A Proposal Of OEE Simulation Decision Support Tools For Lean Practitioners. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Yunus, Siti Rodhiah (2016) Quality Of Service (QOS) Improvement Using Traffic Shaping In ADTEC Batu Pahat. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd Yusoff, Nor Azizah (2016) Design and analysis of three-to-five-phase transformer for multiphase load. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mohd. Noor, Helmi Adly (2016) Serious Games Model In Diagnosing Visual Perception Problem For Autistic Students. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Mohsin Hameed, Atiyah (2016) The Influence Of Friction Stir Welding Parameters On Mechanical Properties Of 6061-T6 Aluminum Alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mosheer, Ahmed Daud (2016) Optimal Solar Cable Selection For Grid-Connected Photovoltaic Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.
Muda, Ayuni Fateeha (2016) Brain Lesion Segmentation And Classification Using Diffusion-Weighted Imaging (DWI). Masters thesis, Universiti Teknikal Malaysia Melaka.
Muhamad, Mohd Muskhairil Amin (2016) Enhance Learning Using Instructional Video In Indices And Logarithms. Masters thesis, Universiti Teknikal Malaysia Melaka.
Muhammad Kamal Aysraf, Pubin (2016) Surface roughness study on mild steel in high speed turning process. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mustapa, Muhammad Zaki (2016) Proportional Integral Derivative Based Control For Autonoumous Vertical Take Off And Landing Of Quadcopter System. Masters thesis, Universiti Teknikal Malaysia Melaka.
Mustapha, Ain Atiqa (2016) Low Power And High Efficiency Rectifying Circuit For Piezoelectric Energy Harvesting Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.
Nadiah Farhana, Hamzah (2016) Cataloging the industrial supplies parts for SAP ECC6 deployment a case study. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ng, Shay Lee (2016) Bondability and reliability study on various silver plated copper leadframe with 25um wire diameter of gold and copper wire. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ngelayang, Thailis Bounya (2016) Design And Optimisation Of Microelectroelectromechanical System (MEMS) Cochlear Biomodel. Masters thesis, Universiti Teknikal Malaysia Melaka.
Nordin, Mohd Hisham (2016) Flip-Chip Bonding Using Laser Induced Ultrasonic Vibration. PhD thesis, Universiti Teknikal Malaysia Melaka.
Norsani, Siti Hadijah (2016) Application Of AHP For Determining The Best Of Palm Oil Fresh Fruit Bunch. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ong, Phaik Ling (2016) An Integrated Principal Component Analysis And Weighted Apriori-T Algorithm For Imbalanced Data Root Cause Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.
Othman, Intan Safina (2016) The Awareness Of Information Security Breach Among User IT In KPTMBP. Masters thesis, Universiti Teknikal Malaysia Melaka.
Othman, Intan Sharhida (2016) Electrodeposition Of Nickel Coatings On Aluminium Alloy 7075 Through A Modified Single Zincating Process. PhD thesis, Universiti Teknikal Malaysia Melaka.
Othman, Nurhazwani (2016) The Relationship Between Training And Development Activities With Innovative Work Behaviour Among SMEs. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ow, Li Lee (2016) PORElicit A Pair Oriented Approach For Improving Multi-Lingual Requirements Elicitation For Requirements Engineers. Masters thesis, Universiti Teknikal Malaysia Melaka.
Peh, Perly Thai Ee (2016) An integration of AHP-ACO technique for social interaction and travel planning. Masters thesis, Universiti Teknikal Malaysia Melaka.
Perumal, Usha Nantini (2016) Development Of Test Data Navigator Tool (TDN). Masters thesis, Universiti Teknikal Malaysia Melaka.
Phoo, Kho Shin (2016) Design Of Compact Tri-Polarized Antenna For Multiple Input Multiple Output (MIMO) System. Masters thesis, Universiti Teknikal Malaysia Melaka.
Rahim, Sarni Suhaila (2016) Automatic Screening And Classification Of Diabetic Retinopathy Eye Fundus Images. PhD thesis, Universiti Teknikal Malaysia Melaka.
Raja Seman, Raja Noor Amalina (2016) Direct Growth Of Vertically Aligned Carbon Nanotube (VACNT) On Different Conducting Substrates For Electrochemical Capacitor (EC). Masters thesis, Universiti Teknikal Malaysia Melaka.
Ramdan, Nur Sufiah Akmala (2016) Computer Vision System For Monitoring Body Discomfort In Manufacturing Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.
Ramli, Sofia Najwa (2016) An Electrocardiogram-Based Authentication Protocol In Wireless Body Area Network. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Rawi, Mohd Asyraf (2016) Investigation of indoor air quality for enclosed space application using electric-powered mini excavator. Masters thesis, Universiti Teknikal Malaysia Melaka.
Razali, Muhammad Razmi (2016) The Model And Evaluation Of Swaying Arm To The Torso Torque Of Humanoid Robot During Walking. Masters thesis, Universiti Teknikal Malaysia Melaka.
Razali, Sharifah Nadiyah (2016) Online Project Based Collaborative Learning Model To Enhance Students Soft Skills. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Ridzuan, Mohd Rasyidi (2016) Active Suspension Control Using Multiorder PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.
Robert@Kerk, Swee Tian (2016) Development Of Lean Environmental Management Intergration System For Sustainbility Of ISO 14001:2004 Standard. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Rosli, Mohamad Muzammir (2016) Optimizing the changeover of packaging machine by implementing single minute exchange of dies in textile manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.
Saari, Saadatunur (2016) Quality Enhancement In Fan Cowl Assembly In An Aero Composite Manufacturing Company Using DMAIC Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sabah, Mariati (2016) Implementation of Kanban Systems through Auto Scheduling tools at Die Bond process. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sabari, Afiqah (2016) Harmonics minimization of a three phase cascaded H-Bridge multilevel inverter. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sabri, Siti Sabariah (2016) Design And Development Of X-Band Hybrid Bandstop Filters. Masters thesis, Universiti Teknikal Malaysia Melaka.
Saeed, Ali Kareem (2016) Modeling For Reduction Of Harmonics Using Inverters In Smart Grid System. Masters thesis, Universiti Teknikal Malaysia Melaka.
Saiful Bahari, Nurul Iman (2016) A Haze Removal Technique For Satellite Remote Sensing Data Based On Spectral And Statistical Methods. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sakthi Velu, Vasanthan (2016) Positioning Control Of A 1-DOF Pneumatic Muscle Actuator (PMA) System With Modified PID Plus Feedforward Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.
Salahuddin, Lizawati (2016) Antecedents Of Safe Use Of Hospital Information Systems Based On Sociotechnical Perspective. PhD thesis, Universiti Teknikal Malaysia Melaka.
Salam, Saifullah (2016) Multi Objective Optimization Using Non-Dominated Sorting Approach For Load Frequency Control. Masters thesis, Universiti Teknikal Malaysia Melaka.
Salim, Mohd Azli (2016) Study Of Transmissibility Of Laminated Rubber-Metal Spring. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Salleh, Nur Syahidah (2016) The effect of heating rate and sintering temperature on glass ceramic composite at different filler loading. Masters thesis, Universiti Teknikal Malaysia Melaka.
Samat, Nurul Basyirah (2016) Energy Audit For Lighting And A/C In Academic Building - Case Study In IKM Bintulu. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sanuri, Izzah (2016) Keberkesanan Perisian Multimedia Interaktf Untuk Meningkatkan Kefahaman Murid Di Dalam Subtopik Sejarah Tahun 4. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sanusi, Syamim (2016) Performance Evaluation Of Space Vector Modulation (SVM) For Multilevel Inverters. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sapar, Ahmad Farid (2016) Modeling of islanding detection methods for microgrid. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sariman, Mohamad Zaharudin (2016) Modelling And Control Of A Semi-Active Magnetorheological Damper For Engine Mounting Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.
Seik Heng, Kai (2016) Adaptive simplified fuzzy logic controller of unmanned underwater vehicle for depth and pitch control. Masters thesis, Universiti Teknikal Malaysia Melaka.
Seow, Liang Hau (2016) Productivity improvement using lean six sigma techniques a case study at semiconductor equipment manufacturer. Masters thesis, Universiti Teknikal Malaysia Melaka.
Shahad, Falih Khlaif (2016) Modeling Of Electrical Distribution Networks With Particle Swarm Optimization Technique For The Improvement Of Voltage Profile And Loss Reduction. Masters thesis, Universiti Teknikal Malaysia Melaka.
Shkarah, Ahmed Jassim (2016) Single Phase And Two Phase Flow For Heat Transfer In Micro Channel Heat Sink. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Siam, Effendy Onn (2016) Peripheral Interface Controller (PIC) Based Maximum Power Point Tracking (MPPT) Algorithm For Photovoltaic (PV) DC To DC Boost Converter. Masters thesis, Universiti Teknikal Malaysia Melaka.
Soh, Tiak Chuan (2016) Improvement On Tear Resistance Of Rubber Moulded Mat By Varying Filler And Accelerator Contents. Doctoral thesis, Universiti Teknikal Malaysia Melaka.
Sulaiman, Farina (2016) Torque Density Improvement Of Spoke Type BLDC Motor Using Hollow Rotor Topology. Masters thesis, Universiti Teknikal Malaysia Melaka.
Sumaidy, Eliyana Sari (2016) Ergonomic Design Chair For Postpartum Mothers. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tahir, Eliza Suraiya (2016) Performance evaluation of throughput and packet loss in different routing protocol on MANET scenarios. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tamby Suleiman, Nurusshahidah (2016) Waste Reduction By Implementing Kaizen Activities In Textile Manufacturing Company. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tan, Kian Heong (2016) Non-sticking on ground ring improvement for copper wire bonding with DMAIC approach. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tan, Ming Hui (2016) Enhanced-PID Control Based Antagonistic Control For Pneumatic Artificial Muscle Actuators. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tan, Pi Hua (2016) Design And Performance Evaluation Of Solar PV System In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tan, Wee Kien (2016) Lean adoption for effective machine's maintenance performance. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tang, Daphne Hui Zyen (2016) Novel Framework For Automated Appliance Registration In Home Energy Management Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tawfeeq, Omar Munaf (2016) Measuring The Effectiveness Of Project Management Information System In The Decision Making Case Study In PEW Group. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tee, Zhen Wei (2016) Dry Sliding Wear And Friction Behavior Of Silicon Carbide And Multi Wall Carbon Nanotubes Reinforced Magnesium Matrix Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tengku Zawawi, Tengku Nor Shuhada (2016) Electromyography (EMG) Signal Analysis For Manual lifting Using Time-Frequency Distribution. Masters thesis, Universiti Teknikal Malaysia Melaka.
Teo, Chee Huat (2016) Development Of Double Stage Filter (DSF) On Stereo Matching Algorithm For 3D Computer Vision Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.
Tey, Sock Chien (2016) Influence Of Gold Silver Plating Thickness On Palladium Coated Copper Wire On Stitch Bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.
Victor Raj, Logan Raj Lourdes (2016) High Performance Of Direct Torque Control For Five Phase Induction Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.
Wan Azhari, Wan Noor Azrina (2016) Effect Of Injection Moulding Parameters On The Shrinkage Using Taguchi Method. Masters thesis, Universiti Teknikal Malaysia Melaka.
Wong, Michael Loke Peng (2016) Design and analysis of electrical testing probe for semiconductor integrated circuit. Masters thesis, Universiti Teknikal Malaysia Melaka.
Yeo, Kian Hong (2016) Effect of epoxy nozzle separation on die attach adhesion at chip / substrate interface. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zainal, Mohd Syafiq (2016) Molding temperature control enhancement for transfer molding process via additional wire heater. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zainol, Nurzaimah (2016) Design Of High Gain Antenna With Harmonic Suppression Using T-Shape DGS And Spurline. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zainuddin, Mohamed Al-Sideque (2016) Aerodynamic performance comparison of various hatchback rear spoiler configurations using CFD analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zakaria, Nuur Farhana Shatilah (2016) The Impact Of User Interface Design Element For Doctor Satisfaction On Electronic Medical Record System. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zakaria, Zailina (2016) The Effect Of Explicit Vocabulary Application (EVA) On Student's Achievement And Appeptance In Learning Explicit English Vocabulary. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zamri, Ruzaidi (2016) Surface Defect Detection And Polishing Parameter Optimization Using Image Processing For G3141 Cold Rolled Steel. PhD thesis, Universiti Teknikal Malaysia Melaka.
Zaraini, Mohd Nazrien (2016) The Analysis Of Metadata Based Classification For Classifying Educational Websites. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zolkapli, Zulfikri Zaki (2016) Influence Of Tooth Designs On Electromagnetic Characteristics In Fractional-Slot Permanent Magnet Brushless Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zuber Ahmadi, Muhd Zharif Rifqi (2016) An Optimal Switching Strategy Of Cascaded H-Bridge Multilevel Inverter For High-Performance Direct Torque Control Of Induction Machines. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zulhanee, Nurliyana (2016) Quality enhancement on safety pin at textile company using Kaizen approach. Masters thesis, Universiti Teknikal Malaysia Melaka.
Zulkapli, Nor Najihah (2016) Sol Gel Process Of Cobalt Nanopracticles Preparation As Effective Catalyst For CNT Growth Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.
Patent
Zahriladha Zakaria (2016) A device, a method and a system for detecting properties of a material. PI 2016702297.