Items where Subject is "T Technology > TJ Mechanical engineering and machinery"

Article

A, Hambali and A.R, Rabiatul and A.S, Rahim and S, Taufik (2012) Design Optimization of Automotive Bumper Beam Through Energy Absorption Analysis. International Journal of Engineering and Science, 13 (1). pp. 35-40. ISSN 2086-3799

A, Hambali and R, Faiz and A.A, Tajul and A.B, Baharudin and M.M.P, Dan (2012) Development of conceptual design of Car Housing Side Mirror using Integrated Approach. Journal of Advanced Manufacturing Technology. pp. 31-40. ISSN 1985-3157

A Rahman, Muhamad Arfauz and Abu Bakar, Baharudin and Saptari, Adi and Hussein, Nur Izan Syahriah and Halim, Isa and Imam Fauzi, Elfi Rahayu (2013) Dimensional deviation affected by cutting parameters and machine tool rigidity in dry turning of S45C steel. Applied Mechanics And Materials, 315. pp. 749-754. ISSN 1662-7482

A. P., Puvanasvaran and Sulaiman, Hisham and Sued, Kamil (2011) Investigation on the Mechanical Characteristics of Sawdust and Chipwood Filled Epoxy. Journal of Mechanical Engineering and Technology, 3 (1). pp. 71-78. ISSN 2180-1053

A.P., Puvanasvaran and Teoh, Yong Siang and Tay, Choo Chuan (2013) Consideration of demand rate in Overall Equipment Effectiveness (OEE) on equipment with constant process time. Journal of Industrial Engineering and Management, 6 (2). pp. 507-524. ISSN 2013-8423

ABD RAZAK , JEEFFERIE and S., Nurhashima and YAAKOB, MOHD YUHAZRI and Sihombing, Haeryip and S., Mohd Shukor and Abdullah, N.S and Omar, M.A (2011) Characterization of Injection Molded 17-4PH Stainless Steel prepared with Waste Rubber Binder. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 3 (1). pp. 11-21. ISSN 2180-1053

ABDULLAH, Mohd Azman and Sulaiman, Nurfarahin and Mat Idera, Ikhwan Hakim and Mohd Razi, Mohd Zakwan and Ngadiman, Mad Nasir (2013) Design and Fabrication of Vehicle All-Wheel-Nuts Remover. International Journal of Computer Science and Electronics Engineering (IJCSEE). pp. 381-384. ISSN 2320-401X

ABDULLAH, Mohd Azman and tamaldin, noreffendy and Abdul Aziz, Muhammad Khatib and Munawar, Ahmad Fadhli and Ngadiman, Mad Nasir (2013) Increasing the Tire Life Span by Means of Water Cooling. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME), 1 (1). pp. 78-80. ISSN 2320–4060

ABDULLAH, Mohd Azman and Zainordin, Ahmad Zaifazlin and Hudha, Khisbullah (2013) Validation and Experimental Evaluation of Magnetorheological Brake-by-Wire System. Journal of Engineering and Technology, 4. pp. 109-122. ISSN 2180-3811

AL-YAKOOB, khalil and Khoo, Mei Sui Linda (2013) MODELLING of HEAT and MASS TRANSFER in the EVAPORATION of a BINARY MIXTURE in a FALLING FILM APPARATUS. World Applied Sciences Journal, 21 (Specia). pp. 47-52. ISSN 1818-4952

AR, Jeefferie and MY, Yuhazri and Omar, Nooririnah and MM, Haidir and Sihombing, Haeryip and mohd, salleh and NA, Ibrahim (2010) Thermo mechanical and morphological interrelationship of polypropylene-multiwalled carbon nanotubes nanocomposites. International Journal of Basic & Applied Sciences, 10 (4). pp. 29-35. ISSN 2077-1223

Ab Ghani, Mohd Ruddin and Affandi, Rosnani and Gan, Chin Kim and Raman, Siti Hajar and Jano, Zanariah (2014) The Inluence Of Concentrator Size, Reflective Material And Solar Irradiance On The Parabolic Dish Heat Transfer. Indian Journal Of Science And Technology (INDJST), 7 (9). pp. 1454-1460. ISSN 0974-6846

Ab Rashid, Mohd Zamzuri and Shah, HNM and Mohd Aras, Mohd Shahrieel and Kamarudin, Muhammad Nizam and Mohammed Kassim, Anuar and Jaafar, Hazriq Izzuan (2014) METAL LINE DETECTION: A NEW SENSORY SYSTEM FOR LINE FOLLOWING MOBILE ROBOT. Journal of Theoretical and Applied Information Technology (JATIT), 64 (3). pp. 756-764. ISSN 1992-8645

Ab Rashid, Mohd Zamzuri and Mohd Shah, Hairol Nizam and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel and Sayed Nordin, Sayed Kushairi (2014) Sorting And Retrieval Robotic System Controlled Via Programmable Logic Controller For Library Usage. International Journal Of U-And E-Service, Science And Technology, 7 (4). pp. 19-30. ISSN -

Ab Rashid, Mohd Zamzuri and Mohd Yakub, Mohd Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Ali Mat, Mohamed Sukri and Mamat, Normaisharah M. and Mohd Putra, S. M. S. and Roslan, Shairatul Amni Husna and Mohd Shah, Hairol Nizam and Mohd Aras, Mohd Shahrieel (2019) Comprehensive Review On Controller For Leader-Follower Robotic System. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 985-1007. ISSN 0379-5136

Ab Rashid, Mohd Zamzuri and Mohd Yakub, Mohd Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Ali Mat, Mohamed Sukri and Mamat, Normaisharah M. and Mohd Putra, S. M. S. and Roslan, Shairatul Amni Husna and Mohd Shah, Hairol Nizam and Mohd Aras, Mohd Shahrieel and Arshad, Mohd Rizal (2019) Reconfigurable Multi-Legs Robot For Pipe Inspection: Design And Gait Movement. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 1132-1144. ISSN 0379-5136

Ab Rashid, Mohd Zamzuri and Sayed Nordin, Sayed Kushairi (2014) Design And Control Of Aquarium Water Management System Using Programmable Logic Controller (PLC). International Journal of Science and Research (IJSR), 3 (9). pp. 1049-1055. ISSN 2319-7064

Ab Wahab, Norfariza and Abd Rahim, Abdul Fattah and Nordin, Abd Khahar and Bidin, Basri and Ibrahim, Mohd Azimin and Zahari, Madiha and Abd Mutalib, Nurliyana (2018) Development of portable linear positioning table for drilling machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 809-813. ISSN 1819-6608

Ab Wahab, Norfariza and Abdul Rani, Muhammad Haris and Nordin, Abd Khahar and Nordin, Nor Fauzi and Ibrahim, Mohd Azimin and Basar, Mohd Farriz and Boejang, Hambali (2018) Design and development of fixable clamping for milling machine based on machining performance. International Journal Of Applied Engineering Research, 13 (1). pp. 576-581. ISSN 0973-4562

Ab Wahab, Norfariza and Mohd Saleh, Afferry and Nordin, Abd Khahar and Tamin, Nor Fauzi and Ibrahim, Mohd Azimin and Ahmad, Suziana and Abdul Hadi, Dayanasari (2018) Development Of Portable Magnetic Clamping For Lathe Machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 902-906. ISSN 1819-6608

Ab Wahab, Norfariza and Mohd Shuhada, Muhammad Khusyairi and Nordin, Abd Khahar and Md Basar, Mohd Farriz and Boejang, Hambali and Mohd Najib, Suhaila and Mohd Nor, Rozilawati (2018) Design And Development Of New Clamping Method For Waterjet Machine (JetCLAMP) Based On Machining Performances. International Journal Of Engineering & Technology (IJET), 18 (01). pp. 1-5. ISSN 2227-2712

Abbas, Adnan Jameel and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Optimization of Machining Parameters in Turning Operation Using PSO and AIS Algorithms: A Survey. Scottish Journal of Arts, Social Sciences and Scientific Studies , 7 (1). ISSN ISSN 2047-1278

Abd Azis, Fadilah and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Othman, Muhammad Nur and Khamis, K.S. and Ghani, O.A.A. (2015) Modelling and analysis of all terrain vehicle (ATV) using system identification for yaw stability. Applied Mechanics and Materials, 761 (2. pp. 221-226. ISSN 16609336

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusaini (2014) Classification Analysis Of High Frequency Stress Wave For Autonomous Detection Of Defect In Steel Tubes. AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, 8. pp. 251-257. ISSN 1991-8178

Abd Halim, Zakiah and Jamaludin, Nordin and Syarif, Junaidi and Syed Yahya, Syed Yusainee (2014) Detection And Analysis Of Defect In Steel Tube Using Vibration Impact Acoustic Emission Method. International Review of Mechanical Engineering (I.RE.M.E.), 8. pp. 277-282. ISSN 1970-8734

Abd Latif, M.J. and Hashim, N.H. and ramlan, roszaidi and Mahmud, J. and Jumahat, A. and Abdul Kadir, M.R. (2013) The Effects of Surface Curvature on Cartilage Behaviour in Indentation Test: A Finite Element Study. Procedia Engineering . pp. 109-115. ISSN 1877-7058

Abd Latif, Mohd Abrar and Abd Manaf, Mohd Edeerozey and Firdaus, Muhammad ‘Izzat Syahmi and Maslamany, Loganarrth and Munawar, Rose Farahiyan (2016) Effects of Particulate Types on Biomass Particulate Filled Kenaf/Polypropylene Composite. Key Engineering Materials, 694. pp. 23-28. ISSN 1662-9795

Abd Latif, Mohd Abrar and Abd Manaf, Mohd Edeerozey and Maslamany, Loganarrth and Mohd Hussain, Muhammad Syafiq and Mohamad, Noraiham (2015) Mechanical Properties of Short Fiber and Non-Woven Kenaf Reinforced Polypropylene Composites: Effects of Oil Palm Shell Powder Addition. Applied Mechanics and Materials, 815. pp. 111-115. ISSN 1662-7482

Abd Latif, Mohd Abrar and Abd Manaf, Mohd Edeerozey and Shamsudin, Zurina (2017) Mechanical Properties of Kenaf Reinforced Polypropylene Composites Added with Oil Palm Shell Powder and Its Activated Carbon. Proceedings of Innovative Research and Industrial Dialogue 2016. pp. 37-38. ISSN 978-967-0257-92-1

Abd Manaf, Mohd Edeerozey and Tsuji, Manami and Nobukawa, Shogo and Yamaguchi, Masayuki (2011) Effect of Moisture on the Orientation Birefringence of Cellulose Esters. Polymers, 3. pp. 955-966. ISSN 2073-4360

Abd Manaf, Mohd Edeerozey (2007) Chemical Modification of Kenaf Fibers. Materials Letters, 61 (10). pp. 2023-2025. ISSN 0167-577X

Abd Manaf, Mohd Edeerozey (2009) Extraordinary Wavelength Dispersion of Orientation Birefringence for Cellulose Esters. Macromolecules, 42. pp. 9034-9040. ISSN 0024-9297

Abd Manaf, Mohd Edeerozey (2013) Incorporation of low-mass compound to alter the orientation birefringence in cellulose acetate propionate. Optical Materials, 35. pp. 1443-1448. ISSN 0925-3467

Abd Manaf, Mohd Edeerozey (2012) Material design of retardation films with extraordinary wavelength dispersion of orientation birefringence: a review. Cellulose, 19. pp. 601-613. ISSN 1572-882X

Abd Manaf, Mohd Edeerozey (2010) Mechanical Properties of Kenaf Bast and Core Fibre Reinforced Unsaturated Polyester Composites. IOP Conf. Series: Materials Science and Engineering, 11 (012006). pp. 1-6. ISSN 1757-899X

Abd Manaf, Mohd Edeerozey (2010) Modification of orientation birefringence of cellulose ester by addition of poly(lactic acid). European Polymer Journal, 46. pp. 2269-2274. ISSN 0014-3057

Abd Manaf, Mohd Edeerozey (2013) Optical anisotropy in solution-cast film of cellulose triacetate. Cellulose, 20. pp. 83-96. ISSN 1572-882X

Abd Manaf, Mohd Edeerozey (2011) Wavelength Dispersion of Orientation Birefringence for Cellulose Esters Containing Tricresyl Phosphate. Macromolecules, 44. pp. 3942-3949. ISSN 0024-9297

Abd Manaf, Mohd Edeerozey and Nitta, Koh-Hei and Yamaguchi, Masayuki (2016) Mechanical Properties of Plasticized Cellulose Ester Films at Room and High Temperatures. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2354-2358. ISSN 1819-6608

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Thevy Ratnam, Chantara and Mahamood, Mazlin Aida and Mohamad, Noraiham (2015) Effects of poly(ethyleneimine)adsorption on graphene nanoplatelets to the properties of NR/EPDM rubber blend nanocomposites. Journal of Materials Science. pp. 1-17. ISSN 1573-4803

Abdollah, Mohd Fadzli bin (2011) The Effect of Maximum Normal Impact Load, Absorbed Energy, and Contact Impulse, on the Impact Crater Volume/Depth of DLC Coating. Tribology Online, 6 (6). pp. 257-264. ISSN 1881-2198

Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Chua, Khai Wei and Mat Tahir, Noor Ayuma (2014) Potential of palm kernel activated carbon epoxy (PKAC-E) composite as solid lubricant: effect of load on friction and wear properties. Jurnal Tribologi, 2. pp. 31-38. ISSN 2289-7232

Abdollah, Mohd Fadzli and Mahmud, Dayang Nor Fatin and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2019) Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions. Friction, 7 (3). pp. 227-236. ISSN 2223-7690

Abdollah, Mohd Fadzli and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and Tamaldin, Noreffendy (2014) Experimental Study on Friction and Wear Behaviors of Ball Bearings under Gas Lubricated Conditions. Jurnal Teknologi , 66 (3). pp. 43-49. ISSN 2180-3722

Abdollah, Mohd Fadzli bin (2012) Deformation–wear transition map of DLC coating under cyclic impactloading. Wear, 27 (-). pp. 435-441. ISSN 0043-1648

Abdollah, Mohd Fadzli bin (2012) Future developments of a deformation-wear transition map of DLC coating. Tribology Online, 7 (3). pp. 107-111. ISSN 1881-2198

Abdollah, Mohd Fadzli bin (2010) Phase transformation studies on the a-C coating under repetitive impacts. Surface & Coatings Technology, 205. pp. 625-631. ISSN 0257-8972

Abdollah, Mohd Fadzli bin (2013) Preliminary Design of Side Door Impact Beam for Passenger Cars using Aluminium Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (1). pp. 11-18. ISSN 2180-1053

Abdollah, Mohd Fadzli bin (2016) Tribology in Malaysia: General perspective. TTA E-Magazine. pp. 6-10. ISSN 228-1732

Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2016) When should i change my tire? CARe Newsletter. p. 5. ISSN 2289-9871

Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Frictional Behavior of Bearing Material Under Gas Lubricated Conditions. Procedia Engineering , 68. pp. 688-693. ISSN 1877-7058

Abdul Hamid, Rahimah and Ito, Teruaki (2016) 3D Prosthodontics Wire Bending Mechanism With A Linear Segmentation Algorithm. Journal of Advanced Manufacturing Technology (JAMT) . PP 33- 45. ISSN 1985-3157

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and ABDULLAH, Mohd Azman and HUDHA, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID with Experimental Throttle-in-the-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdul Latiff, Anas and M. Rusdi, M. F. and Hisyam, M. B. and Ahmad, H. and Harun, S. W. (2017) A Generation Of 2 Um Q-Switched Thulium-Doped Fibre Laser Based On Anatase Titanium (IV) Oxide Film Saturable Absorber. Journal Of Modern Optics, 64 (2). pp. 187-189. ISSN 0950-0340

Abdul Manaf, Muhammad Zaidan and Fakeruddin, Shafarul Hafidi and Mohamad Shukri , Zakaria and Mohd Noor Asril, Saadun and Mohd Hafidzal, Mohd Hanafi (2014) Mini acceleration and deceleration driving strategy to increase the operational time of flywheel hybrid module. Proceedings of International Conference on Mathematics, Engineering & Industrial Applications 2014 (ICOMEIA 2014). pp. 287-292. ISSN 2289-1323 (In Press)

Abdul Munir, Fudhail and Mohd Azmi, Mohd Irwan and Razali, Nadlene and Mat Tokit, Ernie (2012) The effect of parameter changes to the performance of a triangular shape interrupted microchannel heat sink. Jurnal Teknologi, 58. pp. 33-37. ISSN 0127–9696

Abdul Munir, Fudhail and Sidik, N.A.C and Mohamad Zin, Mohd Rody and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah (2010) Numerical Simulations of Shear Driven Square and Triangular Cavity by Using Lattice Boltzmann Scheme. World Academy of Science, Engineering and Technology, 45 (0045:2). pp. 190-194. ISSN 2010-3778

Abdul Salam, Azuki and Ab Hadi, Nik Azran (2014) Fuzzy Logic Controller For Shunt Active Power Filter. International Conferences On Engineering Technology And Technopreneurship (ICE2T), - (-). pp. 256-259. ISSN -

Abdul Shukor, Fairul Azhar and Wakiwaka, Hiroyuki and Nirei, Masami (2015) Design And Performance Index Comparison Of The Permanent Magnet Linear Motor. Progress In Electromagnetics Research M, 43 (-). pp. 101-108. ISSN 1937-8726

Abdullah, Shahrum and Zakaria, Kamarul Ariffin and Ghazali, Mariyam Jameelah (2012) Observation of the fatigue crack propagation rate of an aluminum alloy specimen under fatigue spectrum loadings. Materials Testing, 54 (10). pp. 663-673. ISSN ISSN 0025-5300

Abdullah, Abdul Rahim and Hussin, Adibah Syahirah and Wei Hown, Tee and Mohd Saad, Norhashimah and Jopri, Mohd Hatta and Sutikno, T (2018) Harmonic Load Diagnostic Techniques And Methodologies:A Review. Indonesian Journal Of Electrical Engineering And Computer Science, 9. pp. 690-695. ISSN 2502-4752

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid and tamaldin, noreffendy and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Effect of hBN/Al2O3 nanoparticles on engine oil properties. Energy Education Science and Technology Part A: Energy Science and Research. pp. 3261-3268. ISSN 1308-772X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Effect of hBN/Al2O3 Nanoparticle Additives on the Tribological Performance of Engine Oil. Jurnal Teknologi , 66 (3). pp. 1-6. ISSN 2180-3722

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2013) Optimization of Tribological Performance of hBN/AL2O3 Nanoparticles as Engine Oil Additives. Procedia Engineering , 68. pp. 313-319. ISSN 1877-7058

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2017) Tribological effects of nano-based engine oil diluted with biodiesel fuel. International Journal of Surface and Engineering, 11 (1). pp. 12-22. ISSN 1749-785X

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2016) The potential of hBN nanoparticles as friction modifier and antiwear additive in engine oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Hassan, Masjuki and Saleman, Abdul Rafeq (2014) Improving Engine Oil Properties by Dispersion of hBN/Al2O3 Nanoparticles. Applied Mechanics and Materials. pp. 70-73. ISSN 1660-9336

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid and Saleman, Abdul Rafeq (2017) The hBN Nanoparticles as an Effective Engine Oil Additive to Enhance the Durability and Performance of a Small Diesel Engine. Journal of Mechanical Engineering, SI 1 (1). pp. 103-112. ISSN 1823-5514

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2016) Effect of hexagonal boron nitride nanoparticles as an additive on the extreme pressure properties of engine oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792

Abdullah, Yasseer and Putra, Azma and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Ayob, Md Razali (2013) Investigation on sound absorption coefficient of natural paddy fibers. International Journal of Renewable Energy Resources, Vol. 3 (1). pp. 8-11. ISSN 2289-1846

Abdullah Sani, Nurhernida and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham and Shueb, Mohamad Iqbal (2017) Effects of Nanographene Addition on Tensile and Electrical Properties of Nylon 6,6 Nanocomposite. Proceedings of Innovative Research and Industrial Dialogue 2016. pp. 35-36. ISSN 978-967-0257-92-1

Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Madia and Mohamad Raffi, Nurul Fatin (2013) Finite Element Model of Machining with High Pressure Coolant for Ti- 6Al-4V alloy. Procedia Engineering, 53. pp. 624-631. ISSN 1877-7058

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Ahmad, Siti Sarah Nadia and Mohammad Raffi, Nurul Fatin (2012) Finite Element Model of Machining with High Pressure Coolant for Ti-6Al-4V alloy. Proceedings of Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012. pp. 295-300. ISSN 978-967-5415-49-4

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md. Ali, Mohd Amran and Jusoff, Kamaruzzaman and Sivarao, Subramonian and Ariff, Hambali and Hussein, Nur Izan Syahriah and Wan Mahmood, Wan Hassrulnizzam and Abdullah, Abu and Yusoff, Marianna and Shamshiri, Meysam (2013) Machining Performance of Ti-6Al-4V Titanium Alloy Assisted by High Pressure Waterjet. World Applied Sciences Journal, 21. pp. 98-104. ISSN 1818-4952

Ahmad, Fauzi and Khisbullah , Hudha and Harun, Mohd Hanif (2009) Pneumatically Actuated Active Suspension System for Reducing Vehicle Dive and Squat. Jurnal Mekanikal (28). pp. 85-114. ISSN 0127-3396

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishamuddin and Zamzuri, Hairi and Abd Kadir, Zulkiffli and Aparow, Vimal Rau (2017) Modelling And Control Of A Fixed Calliper-Based Electronic Wedge Brake. Strojniški Vestnik - Journal Of Mechanical Engineering, 63. pp. 181-190. ISSN 0039-2480

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Effect of activation time on the pinang frond based activated carbon for remazol brilliant blue r removal. Journal of Mechanical Engineering and Sciences (JMES) , 7. pp. 1085-1093. ISSN 2231-8380

Ahmad, Mohd Azhar and Herawan, Safarudin Gazali and Yusof, Ahmad Anas (2014) Equilibrium, kinetics, and thermodynamics of remazol brilliant blue R dye adsorption onto activated carbon prepared from pinang frond. ISRN Mechanical Engineering, 2014. pp. 1-7. ISSN 2356-7872

Ahya Ilmudin, Mohamad Hakim and Hashim, Nik Mohd Zarifie and Ja'afar, Abd Shukur and Salleh, Azahari and Jaafar, Anuar and Mohd Sam, Mohd Fazli (2014) Traffic Light Control System Using 434 Mhz Radio Frequency. International Journal of Research in Advent Technology, 2 (8). pp. 26-31. ISSN 2321-9637

Akmal, Suriati (2013) A Methodology for Developing Manufacturing Process Ontologies. Journal of Japan Industrial Management Association. pp. 303-316. ISSN 0386-4812

Ali, Mohd Basri and Abdullah, Shahrum (2014) Evaluating instrumented Charpy impact strain signals using curve fitting equations. Journal Central South University, 21 (DOI: 10.1007/s11771-014-1979-3). pp. 600-6009. ISSN 2227-5223

Ali, Mohd Basri and Abdullah, Shahrum and Nuawi, Zaki and Ariffin, Ahmad Kamal (2013) Correlation of absorbed impact with calculated strain energy using an instrumented Charpy impact test. Indian Journal of Engineering & Materials Sciences, 20. pp. 504-514. ISSN 0975-1017

Ali, Fara Ashikin and Abdul Azis, Fadilah and Mohd Aras, Mohd Shahrieel and Muhammad Nur , Othman and Shahrum Shah, Abdullah (2013) Design A Magnetic Contactless Thruster of Unmanned Underwater Vehicle. International Review of Mechanical Engineering (I.RE.M.E.), 7 (7). pp. 1413-1420. ISSN 1970-8734

Ali, Mohd Basri (2011) Analysis of an Instrumented Charpy Impact Using Power Spectrum Density. Key Engineering Materials. pp. 130-135. ISSN 1013-9826

Ali, Mohd Basri (2011) Evaluating Charpy Impact Signals with Different Frequencies Using Power Spectrum Densities. Advanced Materials Research. ISSN 10226680

Ali, Mohd Basri (2011) Experimental Analysis of an Instrumented Charpy Impact Using Signal Processing Approach. Advanced Materials Research, 197-19. pp. 1621-1625. ISSN 1662-8985

Ali, Mohd Basri (2011) Experimental Analysis of an Instrumented Charpy Impact Using Statistical Study Based Data Analysis. International Journal of Mechanical and Materials Engineering , 6 (2). pp. 260-268. ISSN 1823-0334

Ali, Mohd Basri (2012) Investigation of Energy Absorbed from an Instrumented Charpy Impact on Automotive Specimens. Applied Mechanics and Materials. ISSN 1660-9336

Ali, Mohd Basri (2011) Test Simulation using Finite Element Method. Journal of Physics: IOP conference series: Material Science and Engineering (doi:10). 012-013. ISSN 1757-8981

Ali, Mohd Basri and Abdullah, Shahrum (2014) Mathematical correlation for the strain signal energy characteristics obtained from instrumented charpy impact test. Pensee Journal, 76 (5). pp. 369-377. ISSN 0031-4773

Ali, Mohd Basri Ali (2010) Evaluating Charpy Impact Signals Using Power Spectrum Densities: A Finite Element Method Approach. International Journal of Mechanical and Materials Engineering , 6 (1). pp. 92-101. ISSN 1823-0334

Ali Mokhtar, Mohd Najib and Wong, Kian Loon and Saleman, Abdul Rafeq and Bani Hashim, Ahmad Yusairi and Jafar, Fairul Azni and Zakaria, Muhammad Zulfattah (2014) Synthesis of four bar slider mechanism for finitely three separated positions. Advanced Materials Research, 903 (-). pp. 221-226. ISSN 1662-8985

Alkahari, Mohd Rizal and Mazlan, Siti Nur Humaira and Ramli, Faiz Redza and Maidin, Nurul Ain and Sudin, Mohd Nizam and Zolkaply, Ardzatul Ruziah (2018) Surface Finish And Mechanical Properties Of Fdm Part After Blow Cold Vapor Treatment. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48. pp. 148-155. ISSN 2289-7879

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Faudzie, M. S. M and Nazan, Muhammad Afdhal and Sudin, Mohd Nizam and Mat, Shafizal and Khalil, Siti Nurhaida (2018) Dimensional Accuracy And Surface Roughness Of Part Features Manufactured By Open Source 3D Printer. ARPN Journal Of Engineering And Applied Sciences, 13. p. 1139. ISSN 1819-6608

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Effect of Vaned Diffuser on the Performance of Small Turbocharger. Journal of Mechanical Engineering, SI 1 (1). pp. 227-236. ISSN 1823-5514

Annathurai, Vinodh and Gan, Chin Kim and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) Shading Analysis For The Siting Of Solar PV Power Plant. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5021-5027. ISSN 1819-6608

Annathurai, Vinodh and Gan, Chin Kim and Ibrahim, Khairul Anwar and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) A review on the impact of distributed energy resources uncertainty on distribution networks. International Review of Electrical Engineering (IREE), 11 (4). pp. 420-427. ISSN 1827- 6660

Anuar , Mohamed Kassim and Takashi , Yasuno and Hiroshi, Suzuki and Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Jafar, Fairul Azni and Subramonian, Sivarao (2016) Conceptual Design And Implementation Of Electronic Spectacle Based Obstacle Detection For Visually Impaired Persons. JOURNAL OF ADVANCED MECHANICAL DESIGN, SYSTEMS, AND MANUFACTURING, 10 (7). pp. 1-12. ISSN 1881-3054

Aparow, Vimal Rau and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Development of Antilock Braking System Based on Various Intelligent Control System. Applied Mechanics and Materials, 229-231. pp. 2394-2398. ISSN 1660-9336

Arep@Ariff, Hambali and Minhat, Mohamad (2010) Concurrent Decisions using Analytical Hierarchy Process at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 79-85. ISSN 1985-3157

Asmai, S. A. and Burairah, Hussin and Mohd. Yusof, Mokhtar and Shibghatullah, Abdul Samad (2014) Time series prediction techniques for estimating remaining useful lifetime of cutting tool failure. International Review on Computers and Software (IRECOS) . pp. 1783-1790. ISSN 1828-6003

Azhari, Muhamad Azwar and Omar, Nooririnah and Mustaffa , Nuzaimah (2014) Carbon Dioxide Permeation Characteristics in Asymmetric Polysulfone Hollow Fiber Membrane: Effect of Constant Heating and Progressive Heating. Advanced Materials Research Journal, 896. pp. 37-40. ISSN 10.4028

Azhari, Muhamad Azwar and Fathe’li, Muhammad Asyraf and Aziz, Nur Syawal Aidill and Mohd Nadzri, Muhammad Syahir and Yusuf, Yusliza (2015) A Review On Addition Of ZINC Dialkyldithiophosphate In Vegetable Oil As Physical Properties Improver. ARPN Journal Of Engineering And Applied Sciences, 10 (15). 6496 - 6500. ISSN 1819-6608

Azhari, Muhamad Azwar and Fathe’li, Muhammad Asyraf and Aziz, Nur Syawal Aidill and Mohd Nadzri, Muhammad Syahir and Yusuf, Yusliza (2015) A Review On Addition Of Zinc Dialkyldithiophosphate In Vegetable Oil As Physical Properties Improver. ARPN Journal Of Engineering And Applied Sciences, 10 (15). pp. 6496-6500. ISSN 1819-6608

Azhari, Muhamad Azwar and Suffian, Quratul Nadia and Mat Nuri @ Md Din, Nur Rashid (2014) The Effect Of Zinc Dialkyldithiophosphate Addition To Corn Oil In Suppression Of Oxidation As Enhancement For Bio Lubricants : A Review. Journal Of Engineering And Applied Sciences, 9 (9). pp. 1447-1449. ISSN 1819-6608

Azhari, Muhamad Azwar and Tamar, Muhamad Faisal and Mat Nuri, Nur Rashid and Yusoff, Mohd Rahimi (2015) Physical Property Modification Of Vegetable Oil As Biolubricant Using ZDDP. ARPN Journal Of Engineering And Applied Sciences, 10 (15). 6525 - 6528. ISSN 1819-6608

Aziz Hussein, Sadiq and S., Thiru and Izamshah, Raja and Md Tahir, Abd Salam (2014) Unstable Temperature Distribution in Friction Stir Welding. Advances in Materials Science and Engineering, 2014 (2014). p. 8. ISSN 1687-8434

Azma, Putra and Khalis, Suhaimi and Roszaidi, Ramlan (2014) A Combined Softening and Hardening Mechanism for Low Frequency Human Motion Energy Harvesting Application. Advances in Acoustics and Vibration. pp. 1-13. ISSN 1687-627X

Azma , Putra and Md Rejab, Mohd Noor Arib and Abd Rahman, Roslan and Raja Hamzah, Raja Ishak and Jawaid Iqbal, Inayat-Hussain and Ahmad , Nazirah and Ismail , Asyraf (2014) Using Transmissibility And Vibration Power Flow Methods To Evaluate The Effectiveness Of Elastomeric Mounts For Vibration And Noise Control. Proceedings of the 21st International Congress on Sound & Vibration (ICSV 21) 2014. pp. 1-8. ISSN 2329-3675

Bahar, Mohd Bazli and Miskon, Muhammad Fahmi and Abu Bakar, Norazhar and Ali @ Ibrahim, Fariz and Shukor, Ahmad Zaki (2014) STS motion control using humanoid robot. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 95-108. ISSN 2040-7459

Bakri, Mohammed Hariri and Rahim Azmi, Fadhlur and Abdullah, Abu and Musa, Haslinda (2018) Perception of small medium and enterprises towards halal food supply chain in Malaysia. International Journal Of Mechanical Engineering And Technology, 9 (11). pp. 821-828. ISSN 0976-6340

Bani Hashim, Ahmad Yusairi and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, Lydia (2011) Evaluation of foot kinematic structure by the order of bones' and joints' edges. International Journal of Modelling and Simulation, 31 (2). pp. 101-111. ISSN 1925-7082

Bani Hashim, Ahmad Yusairi and Noor Azuan, Abu Osman and Wan Abas, Wan Abu Bakar (2011) Determining foot-ankle mechanism design by mapping the relationships among bones, joints, and ground reaction force. Global Engineers & Technologists Review, 1 (2). pp. 39-47. ISSN 2231-9700

Bapokutty, Omar and Sajuri, Zainuddin and Junaidi, Syarif (2013) Stress relaxation behaviour and mechanism of heat treated inconel 718 in high temperature environments. Journal of Industrial Technology SIRIM, 21 (1). pp. 43-51. ISSN 0128-4940

Bin Md Fauadi, Muhammad Hafidz Fazli and Yahaya, Saifudin Hafiz (2013) Intelligent Combinatorial Auctions of Decentralized Task Assignment for AGV With Multiple Loading Capacity. IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 8 (4). pp. 371-379. ISSN 1931-4973

Chitrambalam, S. Thiru and Chew, Lai Huat and Phang, Boo Onn and Hemavathi, Sundaram and Mohammad, Imran Syakir and Mat, Shafizal (2012) An investigation on relationship between process control parameters and weld penetration in robotic CO2 arc welding using factorial design approach. Journal Of Mechanical Engineering And Technology (JMET), 4 (2). pp. 1-16. ISSN 2180-1053 (In Press)

Chong, Shin Horng (2011) Practical motion control with acceleration reference for precision motion - new NCTF control and its application to non-contact mechanism. Journal of Precision Engineering , 35 (1). pp. 12-23. ISSN 0141-6359

Chong, Shin Horng and Hashimoto, Hideto and Sato, Kaiji (2010) Practical Motion Control With Acceleration Reference For Precision Motion - New NCTF Control And Its Application To Non-Contact Mechanism. Precision Engineering, 35 (1). pp. 12-23. ISSN 0141-6359

Chong, Shin Horng and Sato, Kaiji (2014) Practical and robust control for precision motion: AR-CM NCTF control of a linear motion mechanism with friction characteristics. IET Control Theory and Applications, 9 (5). pp. 745-754. ISSN 1751-8644

Chong, Shin Horng and Ting, Tze Ter and Sakthi Velu, Vasanthan (2015) Positioning Control Of Ball Screw System Driven By DC Motor. Applied Mechanics And Materials, 761. pp. 142-147. ISSN 1662-7482

Chong, Shin Horng and Ting , Tze Ter and Sakthivelu, Vasanthan (2014) Positioning control of a ball screw system driven by DC motor. Applied Mechanics and Materials. pp. 12-17. ISSN 1660-9336 (In Press)

Chong, Shin Horng (2009) Practical controller design for precision positioning, independent of friction characteristic. Journal of Precision Engineering, 34 (2). pp. 286-300. ISSN 0141-6359

Chua, Kok Yau and Hng, May Ting and Lee, Cher Chia and Thangaraj, Joseph Sahaya Anand (2003) XRD analysis of Cu-Al interconnect intermetallic compound in an annealed micro-chip. Advanced Materials Research, 620. pp. 166-172. ISSN 1022-6680

Dhar Malingam, Sivakumar and Kalyanasundaram, Shankar (2013) Temperature effect on forming of self- reinforced polypropylene based lightweight metal composite structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811

Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2018) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 1-16. ISSN 1537-6494

Din, Abdul Talib and Tan, Chee Fai and Ng, Eng Sia (2012) Mechanical design and analysis of all-terrain mobile robot. Jurnal Teknologi, UTM, 58. pp. 21-25. ISSN 0127-9696

Duraisamy, Navaneethan and Karuppiah, Rajammal and Kasi, Ramesh and T. Subramaniam, Ramesh and Dhar Malingam, Sivakumar (2017) Na-doped LiMnPO4 as an electrode material for enhanced lithium ion batteries. Bulletin of Materials Science, 40 (1). pp. 171-175. ISSN 0250-4707

FUDHAIL ABDUL MUNIR, F.A Munir and MOHD RODY MOHD ZIN, M.R.M Zin and NOR AZWADI CHE SIDIK, N.A.C Sidik and MOHD IRWAN MOHD AZMI, M.I.M Azmi (2012) Numerical Simulations of Flow Behaviour in Driven Cavities at High Reynolds Numbers. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 12 (6). pp. 97-103. ISSN 1511-788X

Fairuz Fazillah, Shuhimi and Mohd Fadzli, Abdollah and Md Abul, Kalam and Masjuki, Hassan and Ashafi'e, Mustafa and Hilmi, Amiruddin (2016) Tribological Characteristics Comparison For Oil Palm Fibre/Epoxy And Kenaf Fibre/Epoxy Composites Under Dry Sliding Conditions. Tribology International, 101. pp. 247-254. ISSN 0301-679X

Fauzi, Nur Faiqah and Mohamad Jaya, Abdul Syukor and Mohammad Jarrah, Mu’ath Ibrahim and Akbar, Habibullah (2017) Thin Film Roughness Optimization In The Tin Coatings Using Genetic Algorithms. Journal Of Theoretical And Applied Information Technology, 95 (24). pp. 6690-6698. ISSN 1992-8645

Foo, Jia En and Chong, Shin Horng and Mohd Nor, Rozilawati and Loh, Ser Lee (2016) Positioning Control Of A One Mass Rotary System With CM NCTF Controller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (11). pp. 125-129. ISSN 2180-1843

Fudhail, Abdul Munir (2012) Accurate Numerical Prediction of Incompressible Fluid Flow in Lid-Driven Cavities. Applied Mechanics and Materials, 110-11 (2012). pp. 4365-4372. ISSN 1660-9336

Ganesh Kumar, K. and Sivarao, Subramonian and T., Joseph Sahaya Anand (2010) An overview of Intermetallic Nickel Aluminides (Ni3Al) as an alternative Automotive Body Material. International Conference on Design and Concurrent Engineering. pp. 132-135. ISSN 983-2948-84-1

Ghazali, Rozaimi and Saad, Mohammad Zyzerull and Syed Hussien, Sharifah Yuslinda and Jali, Mohd Hafiz and Zohedi, Fauzal Naim and Ahmad Izzuddin, Tarmizi (2017) Intelligent Controller Design For Multifunctional Prosthetics Hand. International Journal Of Mechanical Engineering And Robotics Research, 6 (6). pp. 495-501. ISSN 2278-0149

H., Fayaz and R., Saidur and N. , Razali and F.R, Anuar and A.R, Saleman and M.R, Islam (2012) An overview of hydrogen as a vehicle fuel. RENEWABLE & SUSTAINABLE ENERGY, 16. pp. 1511-5528. ISSN 1364-0321

Hairol Nizam , Mohd Shah and Marizan, Sulaiman and Ahmad Zaki , Shukor and Mohd Zamzuri, Ab Rashid (2017) Recognition Of Butt Welding Joints Using Background Subtraction Seam Path Approach For Welding Robot. International Journal Of Mechanical & Mechatronic Engineering (Ijmme), 17 (1). pp. 57-62. ISSN 2227-2771

Hambali, A and Rahim, A.S (2011) Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage. CONCURRENT ENGINEERING: Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Hambali, A and Sapuan, S.M and Mohamad , M (2011) Concurrent Decisions using Analytical Hierarchy Process at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 79-85. ISSN 1985-3157

Hambali, A and Sapuan, S.M and Rahim, A.S and Ismail, N and Nukman, Y (2011) Concurrent Decisions on Design Concept and Material Using Analytical Hierarchy Process at the Conceptual Design Stage. CONCURRENT ENGINEERING: Research and Applications, 19 (2). pp. 111-121. ISSN 1063-293X

Hambali, A and Sapuan, S.M and Tajul, A.A and Taufik, S (2011) Development of Conceptual Design of Automotive Bumper Beam at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 11-25. ISSN 1985-3157

Hambali, Arif and T., Joseph Sahaya Anand and Sivarao, Subramonian (2013) Finite Element Analysis of Conceptual Lumbar Spine for Different Lifting Position. World Applied Sciences Journal, 21. pp. 68-75. ISSN 1818-4952

Hanafi, M. H and Wan Mahmood, W. M. F and Roslizar, Aiman and Zakaria, M. S. and Saadun, M. N. A and Rafeq, Saleman Abdul (2013) Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force. Applied Mechanics and Materials. pp. 275-280. ISSN 1660-9336

Hanafi, M.H.M and Wan Mahmood, W.M.F and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Nor, N.F.M and Zulfattah, Z. M. and Shamsudin, S.A and Ibrahim, A. (2013) Comparison of Soot Particle Movement based on Crank Angle. Procedia Engineering , 68. pp. 245-250. ISSN 1877-7058

Harun, Nurul Hatiqah and Kasim, Mohd Shahir and Zainal Abidin, Muhammad Zaimi and Raja Abdullah, Raja Izamshah and Attan, Hassan and Ganesan, Hema Nanthini (2018) A Study On Surface Roughness During Fused Deposition Modelling: A Review. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 25-35. ISSN 1985-3157

Hasan, Nor Halim and Said, M. R and Leman, A.M (2012) Local Exhaust Ventilation and Application: A Review. International Journal of Engineering & Technology. pp. 39-43. ISSN 127904-7575

Hashim, Hanizam and Mohamad, Noraiham and Azlan, Umar Al-Amani and Mohd Ahyan, Muhammad Qamaruddin (2017) Process Optimization Of EDM Cutting Process On Tool Steel Using Zinc Coated Electrode. MATEC Web Of Conferences, 97. pp. 1-5. ISSN 2261-236X

Hashim, Norlezah and Idris, Fakrulradzi and Kadmin, Ahmad Fauzan and Jaapar Sidek, Siti Suhaila (2019) Automatic Traffic Light Controller For Emergency Vehicle Using Peripheral Interface Controller. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1788-1794. ISSN 2088-8708

Hasim, Norhaslinda and Chong, Shin Horng and Ibrahim, Zulkifilie (2017) CM NCTF With Velocity Feedforward Controller Design For Tracking Control Of An AC Driven X-Y Ball Screw Mechanism. Communications In Computer And Information Science, 752. pp. 149-159. ISSN 1865-0929

Hassan, Muhammad Zahir and Magaswaran, K. and Phuman Singh, A.S. (2012) High Speed Experimental Study of Friction Induced Vibration in Disc Brakes. Applied Mechanics and Materials, 229-231. pp. 747-749. ISSN 1660-9336

Hassan, Muhammad Zahir (2013) The evaluation of disc brake squeal propensity through a fully coupled transient thermomechanical model. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 227 (3). pp. 361-375. ISSN 0954-4070

Hassan, Muhammad Zahir and Ahmad, Fauzi and Aparow, Vimal Rau and HUDHA, Khisbullah (2013) Identification of Intelligent Controls in Developing Antilock Braking System. Journal of Advanced Manufacturing Technology, 7 (1). pp. 1-13. ISSN 1985-3157

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Putra, Azma and Ismail, Ahmad Faris (2014) Prediction of waste heat energy recovery performance in a naturally aspirated engine using artificial neural network. ISRN Mechanical Engineering, 2014. pp. 1-6. ISSN 2356-7872

Herawan, Safarudin Gazali and Ayob, Md Razali and Putra, Azma (2013) Characterization of activated carbons from Oil-palm-shell by CO2 activation with no holding carbonization temperature. The Scientific World Journal, 2013 ( (Articl). pp. 1-6. ISSN 1537-744X (Online)

Hussein, Nur Izan Syahriah and Rasidi, Mohd Kamarul Shaufi and Ayof, Mohd Nizam (2015) Experimental Methods For NICRBSI-WC Cladding On Gray Cast Iron Trim Cutter Die. APPLIED MECHANICS AND MATERIALS, 761. pp. 298-302. ISSN -

Ifayefunmi, Olawale (2013) Effect of prebuckling and edge support on bifurcation buckling of torisphere, cylinder and cone. Journal of Engineering and Technology, 4 (2). pp. 137-148. ISSN 2180-3811

Ifayefunmi, Olawale (2014) A survey of buckling of conical shells subjected to axial compression and external pressure. Journal of Engineering Science and Technology Review , 7 (2). pp. 182-189. ISSN 1791-2377

Ifayefunmi, Olawale and Blachut, Jan (2013) Instabilities in imperfect thick cones subjected to axial compression and external pressure. Marine Structures, 33. pp. 297-307. ISSN 0951-8339

Ishak, Nazila and Waini, Iskandar and Mohamed, Muhammad Khairul Anuar and Rosli, Norhayati and Salleh, Mohd Zuki (2017) Numerical Solution On MHD Flow And Heat Transfer For The Upper-Convected Maxwell Fluid Over A Stretching/Shrinking Sheet. Jurnal Karya Asli Lorekan Ahli Matematik, 10 (1). pp. 1-13. ISSN 1985-5222

Ismail, Ahmad Yusuf and Mat Nuri @ Md Din, Nur Rashid and Ahmad Mansor, Mazlan and Shukri, Muhamad Farid Anwar and Afiq, Mohamad Amirul (2015) Study On The Road Transmitted Vibration Of A Mountain Bicycle. Jurnal Teknologi, 77 (21). pp. 27-31. ISSN 0127-9696

Jaafar, Hazriq Izzuan and Syed Hussien, Sharifah Yuslinda and Ghazali, Rozaimi and Mohamed, Zaharuddin and Jamian, Jasrul Jamani and Mohd Aras, Mohd Shahrieel and Mohd Nasir, Mohamad Na'im and Sulaiman , Mohd Fairuz (2014) Analysis Of Optimal Motion Performance For Underactuated Gantry Crane System Using MOPSO With Linear Weight Summation Approach. Journal of Engineering and Technology, 5 (2). pp. 39-49. ISSN 2180-3811

Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Chong, Chee Soon and Zohedi, Fauzal Naim (2017) Robust Controller Design With Particle Swarm Optimization For Nonlinear Prosthetic Hand System. International Journal Of Mechanical Engineering And Robotics Research, 6 (5). pp. 406-412. ISSN 2278-0149

Jali, Mohd Hafiz and Alias , Khamis and Ghazali, Rozaimi and Ahmad Izzuddin, Tarmizi and Jaafar, Hazriq Izzuan (2015) Development Of Prosthethic Hand Hardware And Its Control System. International Journal of Soft Computing and Engineering (IJSCE), 5 (5). pp. 28-31. ISSN 2231-2307

Jali, Mohd Hafiz and Hamdani, Muhammad Faris and Zohedi, Fauzal Naim and Ghazali, Rozaimi (2017) System Identification And Fuzzy Logic Controller Design For Prosthetic Hand System. Journal Of Engineering Science And Technology, 12. pp. 52-63. ISSN 1823-4690

Jamaludin, Irma Wani and Abdul Wahab, Norhaliza (2017) Recursive Subspace Identification Algorithm Using The Propagator Based Method. Indonesian Journal Of Electrical Engineering And Computer Science, 6 (1). pp. 172-179. ISSN 2502-4752

Jamaludin, Zamberi and Fu @ Hu-Jingwei, Zinvi and Bani Hashim, Ahmad Yusairi and Mohamad, Imran Syakir (2015) EMG recording of wrist gestures under non-ideal electrode placement for machine control in a manufacturing environment. Jurnal Teknologi , 77 (21). pp. 41-49. ISSN 2180-3722

Jamli, Mohamad Ridzuan and Mohd Ihsan, Ahmad Kamal Ariffin and Abdul Wahab, Dzuraidah (2013) Integration of feedforward neural network and finite element in the draw-bend springback prediction. Expert Systems with Applications, 41. pp. 3662-3670. ISSN 0957-4174

Jamli, Mohamad Ridzuan and Mohd Ihsan, Ahmad Kamal Ariffin and Abdul Wahab, Dzuraidah (2015) Modelling of Elastic Modulus Degradation in Sheet Metal Forming Using Back Propagation Neural Network. Jurnal Kejuruteraan, 27. pp. 23-28. ISSN 0128-0198

Jariah, Mohamad Juoi and Zulkifli, Mohd Rosli and Toibah, Abd Rahim and Siti Rahmah, Shamsuri (2013) Physical and Mechanical properties of glass composite material made from incinerated scheduled waste slag and SLS waste Glass. Advanced Material Research. pp. 280-288. ISSN 1022-6680

Jeefferie, Abd Razak and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of Polypropylene-Multiwalled Carbon Nanotubes (PP/MWCNTs) Nanocomposites via Direct Melt Compounding. Journal of Elastomer and Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Characteristics of thermoplastic sugar palm Starch/Agar blend: Thermal, tensile, and physical properties. International Journal of Biological Macromolecules. pp. 575-581. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Japar, Sahari (2017) Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites. International Journal of Biological Macromolecules. pp. 606-615. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2017) Effect of Agar on Flexural, Impact, and Thermogravimetric Properties of Thermo- plastic Sugar Palm Starch. Current Organic Synthesis. pp. 200-205. ISSN 1570-1794

Juoi, J.M. and Arudra, D. and Rosli, Z.M. and Hussain, K. and Japper Jaafar , A (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. Journal Non-Crystalline Solids, 367 (1). pp. 8-13. ISSN 0022-3093

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati and Husain, A.Rashid (2013) Observer-Based Output Feedback Control With Linear Quadratic Performance. Procedia Engineering , 53 (-). pp. 233-240. ISSN 1877-7058

Kasim, Mohd Shahir (2014) Investigation on Wear Behavior and Chip Formation During Up-Milling and Down-Milling Operations for Inconel 718. Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 15-21. ISSN 21803722

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Mohd Zainurin, Nurul Shafiqah and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah and Mat Harttar, Maziati Akmal and Mohamed, S.B. and Nawi, M.A.M. (2019) The Effects Of Dry And Chilled Air On Tool Wear Behavior During Face Milling Of Inconel 718. Jurnal Tribologi, 21. pp. 47-62. ISSN 2289-7232

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2011) Surface Integrity of Inconel 718 under MQL condition. Advanced Materials Research, 150-15. 1667 -1672. ISSN 1022-6680

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Wear mechanism and notch wear location prediction model in ball nose end milling of Inconel 718. Wear, 302 (1-2). pp. 1171-1179. ISSN 0043-1648

Kasno, Mohammad `Afif and Mohd Aras, Mohd Shahrieel and Yeoh, Eik Keong and Abdul Azis, Fadilah and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2016) Design Analysis Of Remotely Amphibian Vehicle (RAV) – Underwater Drone. Jurnal Teknologi, 76 (1). pp. 1-5. ISSN 0127-9696

Khalid, Mohamad Kamal and Mansor, Muhd Ridzuan and Abdul Kudus, Syahibudil Ikhwan and Mohd Tahir, Musthafah and Hassan, Muhammad Zahir (2011) Performance Investigation of the UTeM Eco-Car Disc Brake System. International Journal of Engineering & Technology IJET-IJENS, 11 (6). pp. 1-6. ISSN 2077-1185

Khisbullah , Hudha and zakaria, Mohd Hafidz and tamaldin, noreffendy (2011) Hardware in the Loop Simulation of Active Front Wheel Steering control for yaw disturbance rejection. International Journal of Vehicle Safety, 5 (4). pp. 356-373. ISSN 1479-3105

Laily, Suraya and Md Ali, Mohd Amran and Nur Izan Syahriah, Hussein and Mohd Razali, Muhamad and Manshoor, Bukhari and Mohd Amri, Lajis and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik , Roni Sahroni (2014) TAGUCHI METHOD PREDICTION OF EDM DIE-SINKING PARAMETERS ON SURFACE INTEGRITY FOR ALUMINIUM COMPOSITE USING COPPER ELECTRODE. Sci.Int.(Lahore), 26 (4). pp. 1455-1458. ISSN ISSN 1013-5316; CODEN: SINTE 8

Lau, Kok Tee and Kok, Hoi Ern and Ab Maulod, Hairul Effendy and Abdul Latiff, Nurizzatul Zahirah and Abdul Aziz, Aida Nazifa and Rosli, Nur Hazirah (2019) Effect Of Laminating Press’s Opening-Stacking Position On Adhesive Thickness In Coverlay/Adhesive/Flexible-Printed-Circuit Sheet. Journal Of Engineering Technology And Applied Physics, 1 (1). pp. 1-3. ISSN 2682-8383

Lau, Saijod T.W. and Said, M. R. and Yaakob, Mohd Yuhazri (2012) On the effect of geometrical designs and failure modes in composite axial crushing: A literature review. Composite Structure, 94 (3). pp. 803-812. ISSN 0263-8223

Lee , Jun Wei and Shukor, Ahmad Zaki and Jamaluddin, Muhammad Herman (2015) Workspace Control Of Two Link Planar Robot Using Micro-Box 2000. Jurnal Teknologi, 77 (20). pp. 9-18. ISSN 0127-9696

Liaw, Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah and Sutikno, Tole (2014) A Review Of Parabolic Dish-Stirling Engine System Based On Concentrating Solar Power. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (4). pp. 1142-1152. ISSN 1693-6930

Liew, Pay Jun and Yan , Jiwang and Masaki, Takeshi and Kuriyagawa, Tsunemoto (2012) Effect of Different Dielectric Fluids on Micro EDM of Low Conductivity Ceramic Material RB-SiC. Advanced Materials Research. pp. 529-534. ISSN 10226680

Liew, Pay Jun and Abdul Razak, Muhammad Raziman and Hussein, Nur Izan Syahriah and Ahsan, Qumrul (2016) Experimental Investigation Of Electrical Discharge Machining Using Dielectric Fluid With Surfactant And Different Carbon Additives. International Journal Of Applied Engineering Research, 11 (15). pp. 8507-8510. ISSN 0973-4562

Liew, Pay Jun and Mohd Hajazi, Aini Syahida and Shaaroni, Ainusyafiqah and Sulaiman, Mohd Amri and Raja Abdullah, Raja Izamshah (2018) Investigation Of Effects Of Carbon Nanofiber Nanofluid In Drilling Of AISI 304 Stainless Steel. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 491-500. ISSN 1985-3157

Liew, Pay Jun and Zainal, Nurlishafiqa and Ahsan, Qumrul and Zhou, T. and Yan, J. (2018) Experimental Investigation Of RB-SiC Using Cu–CNF Composite Electrodes In Electrical Discharge Machining. The International Journal Of Advanced Manufacturing Technology, 98 (9-12). pp. 3019-3028. ISSN 0268-3768

Liew, Pay Jun and Hashim, Umira Syafika and Abd Rahman, Md Nizam (2017) Effect Of Chilled Air Coolant On Surface Roughness And Tool Wear When Machining 2205 Duplex Stainless Steel. Journal of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 61-68. ISSN 1985-3157

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562

Liew , Pay Jun and Shimada, Keita and Mizutani, Masayoshi and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Fabrication of Microstructures on RB-SiC by Ultrasonic Cavitation Assisted Micro-Electrical Discharge Machining. International Journal of Automation Technology. pp. 621-629. ISSN 881-7629

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Carbon nanofiber assisted micro electro discharge machining of reaction-bonded silicon carbide. Journal of Materials Processing Technology. pp. 1076-1087. ISSN 0924-0136

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2013) Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide. Applied Surface Science. pp. 731-743. ISSN 0169-4332

Liew , Pay Jun and Yan , Jiwang and Kuriyagawa, Tsunemoto (2014) Fabrication of deep micro-holes in reaction-bonded SiC by ultrasonic cavitation assisted micro-EDM. International Journal of Machine Tools & Manufacture. pp. 13-20. ISSN 0890-6955

Loh, Ser Lee and Chong, Shin Horng and Foo, Jia En and Hee, Wai Keat and Hasim, Norhaslinda (2016) Fast Positioning Performance In Ball Screw Mechanism With Disturbance Observer. Jurnal Teknologi, 78. pp. 71-78. ISSN E-ISSN2180-3722

Loh, Ser Lee and Keek, Joe Siang and Chong, Shin Horng (2019) Comprehensive Development And Control Of A Path-Trackable Mecanum-Wheeled Robot. IEEE Access, 7. pp. 18368-18381. ISSN 2169-3536

M. R., Sapiee and Noordin, A. (2010) Adaptive Gain Controller Using Model Reference Adaptive Control Method Stability Approach For Road Vehicle Following System. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 2 (1). pp. 55-70. ISSN 2180-1053

M.Y, YUHAZRI and P.T, Phongsakorn and I.P, Haeryip Sihombing and A.R., Jeefferie and A. P., Puvanasvaran and A.M, Kamarul and Rassiah, Kannan (2011) Mechanical Properties of Kenaf/Polyester Composites. International Journal of Engineering & Technology, 11 (1). pp. 127-131. ISSN 2077-1185

M.Y, YUHAZRI and Goh, Nilson and Sihombing, Haeryip and Abd Manaf, Mohd Edeerozey (2016) Mechanical Properties and Failure Analysis of Laminated Glass Reinforced Composite with Various Gelcoat Thickness. Key Engineering Materials, 694. pp. 8-12. ISSN 1662-9795

M.Zamberi, Mahanum and Ayob, Md Razali (2011) Experimental Study on Low Cost Biodiesel Production Alkaline Based Catalysts by Using Frying Oil. Journal of Engineering and Technology, 2. pp. 55-65. ISSN 2180-3811

MOHD HANAFI, MOHA HANAFI and ABDULLAH, MOHD FADZLI and Saleman, Abdul Rafeq and MOHD NOR, NUR FATHIAH and Shamsuddin, Shamsul Anuar (2013) Comparison of Soot Particle Movement Based on Crank Angle. Procedia Engineering . pp. 245-250. ISSN 1877-7058

MUSA@OTHMAN, MASJURI (2011) Development of Model System for Cost-Effective Pico-Hydro Turbine. Development of Model System for Cost-Effective Pico-Hydro Turbine. pp. 17-21. ISSN 978-1-4577-0340-9

Mamat, Normaisharah and Abdul Karim, Kasrul and Ibrahim, Zulkifilie and Ahmad Tarusan, Siti Azura and Mat Lazi , Jurifa and Yusup Lada, Musa (2014) Analysis Of A Bearingless Permanent Magnet Synchronous Motor. Science International-Lahore, 26. pp. 1639-1643. ISSN 1013-5316

Manap, Abreeza and Misran, Halina and Okabe, T and Ogawa, K and Omar, Nooririnah (2014) Experimental and SPH study of cold spray impact on similar and dissimilar metals. Surface Engineering, 30 (5). pp. 335-341. ISSN 02670844

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Arep @ Ariff, Hambali (2013) Stiffness prediction of hybrid kenaf/glass fiber reinforced polypropylene composites using rule of mixtures (ROM) and rule of hybrid mixtures (RoHM). Journal of Polymer Materials, 30 (3). pp. 321-334. ISSN 0973-8622

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Arep @ Ariff, Hambali and Alias, Mohd Fuad (2014) A simplified life cycle analysis of an automotive parking brake lever using polymer composites. Applied Mechanics and Materials, 699. pp. 395-400. ISSN 1660-9336

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Ariff, Hambali (2014) Conceptual design of kenaf fiber polymer composite automotive parking brake lever using integrated TRIZ–Morphological Chart–Analytic Hierarchy Process method. Materials and Design, 54. pp. 473-482. ISSN 0261-3069

Mansor, Muhd Ridzuan and Salit, Mohd Sapuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Ariff, Hambali (2013) Hybrid natural and glass fibers reinforced polymer composites material selection using Analytical Hierarchy Process for automotive brake lever design. Materials and Design, 51. pp. 484-492. ISSN 0261-3069

Mansor, Muhd Ridzuan and Sapuan, S.M and Hambali, Arif and Zainudin, Edi Syams and Nuraini, A.A. (2014) Materials Selection of Hybrid Bio-Composites Thermoset Matrix for Automotive Bumper Beam Applicationusing Topsis Method. Advances in Environmental Biology, 8 (8). pp. 3138-3442. ISSN 1995-0756

Mansor, Muhd Ridzuan and Sapuan, S.M and Zainudin, E.S. and Nuraini, A.A. and Hambali, Arif (2014) Thermoplastic Matrix Material Selection using Multi Criteria Decision Making Method for Hybrid Polymer Composites. Applied Mechanics and Materials, 564. pp. 439-443. ISSN 1660-9336

Mansor, Muhd Ridzuan and Sapuan, S.M and Zainudin, Edi Syams and Abd Aziz, Nuraini and Hambali, A (2014) Rigidity Analysis of Kenaf Thermoplastic Composites using Halpin-Tsai Equation. Applied Mechanics and Materials , 548-54. pp. 29-33. ISSN 1662-7482

Maslan, Mohd Nazmin and Sato, Kaiji and Shinshi, Tadahiko (2019) Position Measurement And Control Of A Thin And Compact Linear Switched Reluctance Motor With A Disposable-Film Mover. SENSORS AND ACTUATORS A: PHYSICAL, 285. pp. 80-88. ISSN 0924-4247

Masripan, Nor Azmmi and Yuki , Miyahira and Hidenori, Nishimura and Takayuki, Tokoroyama and Noritsugu , Umehara and Yoshio, Fuwa (2013) Effect of Transfer Layer on Ultra Low Friction of CNx Coating under Blowing Dry Ar. Tribology Online. pp. 219-226. ISSN 1881-2198

Masripan, Nor Azmmi and Ohara , Kenji and Umehara, Noritsugu and Kousaka, Hiroyuki and Tokoroyama, Takayuki and Inami, Shigeru and Zushi, Koji and Fujita, Masahito (2013) Hardness Effect Of DLC On Tribological Properties For Sliding Bearing Under Boundary Lubrication Condition In Additive-Free Mineral Base Oil. Tribology International, 65. pp. 265-269. ISSN 0301-679X

Mat, Shafizal and Salim, Mohd Azli (2011) The Performance Improvement for Plenum Inside Intake Manifold in Automotive Vehicles Engine. Journal of Electrical and Mechanical Engineering, 2 (1). pp. 13-20. ISSN 2010-1635

Mat, Shafizal and Salim, Mohd Azli and Wan Mohd Farid , Wan Mohamad and Md. Saifuddin, Md Yusop (2011) Design and Ergonomics Analysis of Cutter Machine Locking Device in Aerospace Industry. Journal of Materials Science and Engineering, 5 (2). pp. 145-154. ISSN 1934-8959

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The effect of sliding distance at different temperatures on the tribological properties of a palm kernel activated carbon–epoxy composite. Tribology International, 94. pp. 352-359. ISSN 0301-679X

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2015) The effect of temperature on the tribological properties of palm kernel activated carbonepoxy composite. Tribology Online, 10 (6). pp. 428-433. ISSN 1881-2198

Md Ali, Mohd Amran and Laily, Suraya and Fatin, Aisyah and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Mohd Amri, Lajis and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Performance of Brass Electrode on Material Removal for Aluminium Composite in EDM Die-Sinking. Applied Mechanics and Materials, 660. pp. 43-47. ISSN 1662-7482

Md Ali, Mohd Amran and Laily, Suraya and Nor, Halida Ilyani Kamarudin and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri and Raja Izamshah , Raja Abdullah and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-Sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials, 465-466. pp. 1214-1218. ISSN 1662-7482

Md Ali, Mohd Amran and M., Samsul and HUSSEIN, NUR IZAN SYAHRIAH and Mohd Rizal , Salleh and Raja Izamshah , Raja Abdullah and Mohd , Hadzley and Mohd Shahir, Kasim and Mohd Amri , Sulaiman and Sivarao, Subramonian (2013) The Effect of Edm Die-sinking Parameters on Material Removal Rate of Beryllium Copper Using Full Factorial Method. Middle-East Journal of Scientific Research. pp. 44-50. ISSN 1990-9233

Md Ali, Mohd Amran and Salmah, Siti and Abdul Aziz, Mohd Sanusi and Mohd Yuhazri, Yaakob and Noraiham, Mohamad and Mohd Abid, Mohd Asyadi Azam and Zulkeflee, Abdullah and mohamad , effendi (2014) Surface Roughness Optimization in Drilling Process Using Response Surface Method (RSM). Jurnal Teknologi (Sciences and Engineering), 66 (3). pp. 29-35. ISSN 21803722

Md Ali, Mohd Amran and Suraya, Laily and Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-Sinking Parameters on Non-Conductive Materials. Advanced Materials Research, 903. pp. 56-60. ISSN 1662-8985

Md Ali, Mohd Amran and Laily, Suraya and Kamarudin, NOR Halida Ilyani and Hussein, Nur Izan Syahriah and Mohd Razali, Muhamad and Bukhari, Mashoor and Lajis, Mohd Amri and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Taufik, Roni Sahroni (2014) The Effect of EDM Die-sinking Parameters on Material Characteristic for Aluminium Composite Using Tungsten Copper Electrode. Applied Mechanics and Materials. pp. 1214-1218. ISSN 1662-7482

Md Ali, Mohd Amran and Laily, Suraya and Nor Assyura, Nor and Hussein, Nur Izan Syahriah and Muhamad, Mohd Razali and Manshoor, Mohd Bukhari and Lajis, Mohd Amri (2014) The Effect of EDM Die-sinking Parameters on Non-conductive Materials. Applied Mechanics and Materials. pp. 56-60. ISSN 1662-7482

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Mohd, Zaki and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The effect of pressure on warpage of dumbbell plastic part in injection moulding machine. Applied Mechanics and Materials, 529. pp. 61-66. ISSN 1662-7482.

Md Ali, Mohd Amran and Salmah, Siti and Zaki, Mohd and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) The Effect of Pressure on Warpage of Dumbbell Plastic Part in Injection Moulding Machine. Advanced Materials Research, 903. pp. 61-66. ISSN 1662-8985

Md Ali, Mohd Amran and Salmah, Siti and Zolkarnain, Marjom and Umar , Al-amani and RAJA ABDULLAH, RAJA IZAMSHAH and Abu Bakar, Mohd Hadzley and Zulkeflee, Abdullah and Abdul Aziz, Mohd Sanusi (2014) WARPAGE ANALYSIS VERIFICATION BETWEEN SIMULATION AND EXPERIMENTAL OF DUMBBELL PLASTIC PART IN THE INJECTION MOULDING PROCESS. Sci.Int.(Lahore), 26 (4). pp. 1575-1579. ISSN ISSN 1013-5316

Md Fahmi, Abd Samad (2014) Evolutionary Computation in System Identification: Review and Recommendations. International Journal of Automatic Control. pp. 208-216. ISSN 19746059

Md Fauadi, Muhammad Hafidz Fazli and Akmal, Suriati and Mat Ali, Mahasan and Anuar, Nurul Izah and Ramlan, Samad and Mohamed Noor, Ahamad Zaki and Awang, Nurfadzylah (2018) Intelligent Vision-Based Navigation System For Mobile Robot: A Technological Review. Periodicals Of Engineering And Natural Sciences (PEN), 6 (2). pp. 47-57. ISSN 2303-4521

Md Ghazaly, Mariam (2006) Performance Comparison between PID And Fuzzy Logic Controller in Position Control System of Dc Servomotor. Jurnal Teknologi, (45). pp. 1-17. ISSN JTD/2005/30

Md Ghazaly, Mariam (2012) Basic characteristics of a multilayer thin electrostatic actuator supported by lubricating oil for a fine-motion stage. Precision Engineering. pp. 77-83. ISSN doi:10.1016/j.precisioneng.2011.07.008

Md Ghazaly, Mariam and Sato, Kaiji (2013) Characteristic switching of a multilayer thin electrostatic actuator by a driving signal for an ultra-precision motion stage. Precision Engineering. pp. 107-116. ISSN http://dx.doi.org/10.1016/j.precisioneng.2012.07.005

Md Isa, Mohamed Hafiz and Zakaria, Muhammad Zulfattah and Abdul Munajat, Nurain and Abu Bakar, Fateh Sakinah and Haron, Muhammad Asyraf (2017) Cleaner Production Implementation At Chicken Slaughtering Plant. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4324-4328. ISSN 1819-6608

Md Palil, Md Dan and Abdull Mutalib, Fadhli Akmal (2012) Design crash cushion using waste tire for toll plaza barrier. Journal of Advanced Manufacturing Technology (JAMT) , 6 (2). pp. 97-108. ISSN 1985-3157

Mines, R.A.W and Tsopanos, S. and Shen, Y. and Rafidah, Hasan and McKown, S.T. (2013) Drop weight impact behaviour of sandwich panels with metallic micro lattice cores. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 60. pp. 120-132. ISSN 0734-743X

Minhat, Mohamad (2011) A Framework for a Development of an Intelligent CNC Controller Based on STEP-NC. Advanced Materials Research , 383 - . pp. 984-989. ISSN 10.4028/www.scientific.net/AMR.383-390.984

Minhat, Mohamad (2012) Interoperable CNC Machine via Function Block and STEP-NC Data Model for Milling Operation. Applied Mechanics and Materials, 229-23. pp. 2365-2369. ISSN 1660-9336

Minhat, Mohamad (2014) An Open STEP-NC Controller Via LabVIEW platform. Periodical of Applied Mechanics and Materials Vol 660 in 2014, 660 (873). pp. 1-5. ISSN 10.4028/www.scientific.net/AMM.660.873

Minhat, Mohamad and Abd. Rahman, Md Nizam (2013) A mild steel shear zone temperature minimization using genetic algorithm and direct search toolbox in cnc turning operation. International Review of Mechanical Engineering, 7 (1). pp. 38-45. ISSN 1970-8734 (In Press)

Minhat, Mohamad and Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. Journal of advanced Manufacturing Technology (AMT). pp. 1-8. ISSN Nil (Submitted)

Minhat, Mohamad and Vyatkin, Valeriy and Xu, Xun (2009) STEPNCMillUoA: A CNC system based on STEP-NC and Function Block architecture. . International Journal of Mechatronics and Manufacturing Systems, 2 (1/2). pp. 3-19.

Minhat, Mohamad and Vyatkin, Valeriy and Xu, Xun and Wong, Soon and Al-Bayaa, Zina (2009) A novel open CNC architecture based on STEP-NC data model and IEC 61499 function blocks. Robotics and Computer Integrated Manufacturing, 25. pp. 560-569.

Misha, Suhaimi and Mat, Sohif and Ruslan, Mohd Hafidz and Salleh, Elias @ Ilias and Sopian, Kamaruzzaman (2014) Performance of a solar assisted solid desiccant dryer for kenaf core fiber drying under low solar radiation. Solar Energy, 112. pp. 194-204. ISSN 0038-092X

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Jafar, Fairul Azni and Mohamed Noor, Ahamad Zaki and Nordin, Mohd Hisham (2018) Simulation-Based Multi-Objective Optimization For Distributed Material Transportation System. International Journal Of Engineering & Technology, 7 (3.20). pp. 92-94. ISSN 2227-524X

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Zainudin, Siti Fairus and Mohamed Noor, Ahamad Zaki and Jafar, Fairul Azni and Mat Ali, Mahasan (2018) Optimization Of Material Transportation Assignment For Automated Guided Vehicle (AGV) System. International Journal Of Engineering & Technology, 7 (3.20). pp. 334-338. ISSN 2227-524X

Mohamad, Noraiham (2011) Investigation on Impact Fracture of Epoxidized Natural Rubber-Alumina Nanoparticle Composites (ENRAN). Global Engineers & Technologist Review, 1 (2). pp. 26-34. ISSN 2231-9700

Mohamad, Noraiham and Abd Latiff, Anisah and Ab Maulod, Hairul Effendy and Asyadi Azam, Mohd and Mohd Edeerozey, Abd Manaf (2014) A sustainable polymer composite from recycled polypropylene filled with shrimp shell waste. Polymer-Plastics Technology and Engineering, 53 (2). pp. 167-172. ISSN 1525-6111 (Submitted)

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abd Razak, Jeefferie and Dimin @ Mohd Amin, Mohd Fairuz (2013) Effect of chitosan gelatinization temperature on water absorption and water retention of chitosan-based urea fertilizer. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1357-1366. ISSN 2229-8649

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and Abdul Razak, Jeefferie and Dimin @ Mohd Amin, Mohd Fairuz (2013) Effect of chitosan gelatinization temperature on water absorption and water retention of chitosan-based urea fertilizer. International Journal of Automotive and Mechanical Engineering (IJAME), 8. pp. 1357-1366. ISSN 2180-1606

Mohamad, Noraiham and Muchtar, Andanastuti and Ghazali, Mariyam Jameelah and Hj Mohd, Dahlan and Azhari, Che Husna (2008) The Effect of Filler on Epoxidised Natural Rubber-Alumina Nanoparticles Composites. European Journal of Scientific Research, 24 (4). pp. 538-547. ISSN 1450-216X/ 1450-202X

Mohamad, Noraiham and Muchtar, Andanastuti and Ghazali, Mariyam Jameelah and Hj Mohd, Dahlan and Azhari, Che Husna (2010) Epoxidized natural rubber–alumina nanoparticle composites: Optimization of mixer parameters via response surface methodology. Journal of Applied Polymer Science, 115 (1). pp. 183-189. ISSN 1097-4628

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Abdollah, Mohd Fadzli bin and Abd Manaf, Mohd Edeerozey (2013) Mechanical and Morphological Properties of Polypropylene/Epoxidized Natural Rubber Blends at Various Mixing Ratio. Procedia Engineering , 68. pp. 439-445. ISSN 1877-7058

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Ab Maulod, Hairul Effendy and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Mohd Abid, Mohd Asyadi Azam and Yaakub, Mohd Yuhazri and Abdollah, Mohd Fadzli and Abd Manaf, Mohd Edeerozey (2013) Mechanical and morphological properties of polypropylene/epoxidized natural rubber blends at various mixing ratio. Procedia Engineering . pp. 1-6. ISSN 1877-7058 (Unpublished)

Mohamad, Noraiham and Zainol, Nur Sharafina and Rahim, Faisal Faris and Mohd Salleh, Mohd Khuzaimi and Azam, Mohd Asyadi and YAAKOB, MOHD YUHAZRI and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Abdollah, Mohd Fadzli bin (2014) Interaction of Mixing Factors with Mechanical Properties of PP/ENR Blend via Response Surface Methodology. Journal of Mechanical Engineering, 11 (1). pp. 1-13. ISSN 1823-5514

Mohamad, Noraiham and Zainol, Nur Sharafina and YAAKOB, MOHD YUHAZRI and ABD RAZAK , JEEFFERIE (2013) MORPHOLOGICAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE/EPOXIDIZED NATURAL RUBBER THERMOPLASTIC VULCANIZATES TREATED WITH MALEIC ANHYDRIDE-GRAFTED POLYPROPYLENE. International Journal of Automotive and Mechanical Engineering , 8 ((July-). pp. 1305-1315. ISSN 2180-1606 (online) 2229-8649 (print)

Mohamad Haniff , Harun and Khalil Azha, Mohd Annuar and Mohd Firdaus, Mohd Ab Halim and Mohd Hanif, Che Hasan and Mohd Shahrieel, Mohd Aras and Muhamad Faizal, Yaakub (2016) Peltier And Seebeck Efficacy Of Hot And Cold Air System For Portable O-Ref (Oven & Refrigerator) Application. Proceedings of Mechanical Engineering Research Day 2016. pp. 81-82. ISSN 9789670257709

Mohamad Jaya, Abdul Syukor and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Mohd Razali and Abd. Rahman, Md. Nizam and Hasan Basari, Abd Samad (2013) Predictive Modeling of TiN Coating Roughness. Advanced Materials Research, 626 (2013). pp. 219-223. ISSN 1662-8985

Mohamad Jaya, Abdul Syukor and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Muhd. Razali and Hasan Basari, Abd Samad and Abd. Rahman, Md. Nizam (2014) Modeling of TiN Coating Thickness Using RSM Approach. Key Engineering Materials, 594-59 (2014). pp. 556-560. ISSN 1662-9795

Mohamad Juoi, Jariah and Nazari , Farahani Irna and Mitan, Nona Merry Merpati and Shaaban, Azizah (2013) Rheological Properties of Urea-CaLS Mixture for Urea Fertilizer Granulation. Advanced Materials Research , Vol. 7. pp. 329-332. ISSN 1022-6680

Mohamad Shukri, Zakaria (2012) Boil-Off Gas Formation inside Large Scale Liquefied Natural Gas (LNG) Tank Based on Specific Parameters. Applied Mechanics and Materials, 229-231. pp. 690-694. ISSN 1660-9336

Mohamad Shukri , Zakaria and Muhammad Zaidan, Abdul Manaf and Mohd Hafidzal, Mohd Hanafi and Mohd Noor Asril, Saadun (2013) Computational Simulation of Boil-Off Gas Formation inside Liquefied Natural Gas tank using Evaporation Model in ANSYS Fluent. Applied Mechanics and Materials, 393. pp. 839-844. ISSN 1660-9336

Mohamad Zin, Mohd Rody (2010) Modelling of the Dynamics of a Droplet Using The Lattice Boltzmann Method. International Journal of Mechanical and Materials Engineering , 5 (2). pp. 276-281. ISSN 1823-0334

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2014) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. Advanced Materials Research. pp. 779-845. ISSN 10.4028/www.scientific.net/AMR.845.779

Mohamed, Zaharuddin and Jaafar, Hazriq Izzuan and Mohd Subha, Nurul Adilla and Husain, Abdul Rashid and Ismail, Fatimah Sham and Ramli, Liyana and Tokhi, Mohammad Osman and Shamsudin, Mohamad Amir (2019) Efficient Control Of A Nonlinear Double-Pendulum Overhead Crane With Sensorless Payload Motion Using An Improved PSO-Tuned PID Controller. Journal Of Vibration And Control, 25 (4). pp. 907-921. ISSN 1077-5463

Mohamed Kassim, Anuar and Mohd Aras, Mohd Shahrieel and Shukor, Ahmad Zaki and Jaafar, Hazriq Izzuan and Ab Rashid, Mohd Zamzuri and Baharom, Mohamad Faizal and Jafar, Fairul Azni (2015) Development and evaluation of two-parallel crawler robot by using proportional controller. Jurnal Teknologi, 77 (20). pp. 39-45. ISSN 0127-9696

Mohamed Kassim, Anuar and Yasuno, Takashi and Suzuki, Hiroshi and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2016) Indoor Navigation System Based On Passive RFID Transponder With Digital Compass For Visually Impaired People. (IJACSA) INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS, 7 (2). pp. 604-611. ISSN 2156-5570

Mohamed Noor, Ahamad Zaki and Md Fauadi, Muhammad Hafidz Fazli and Jafar , Fairul Azni and Zainudin, Siti Fairus (2017) Fusion of Fuzzy AHP in selecting material for drinking water bottle based on customer needs. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4243-4249. ISSN 1819-6608

Mohammad Nasir, Mohd Zakaria and Dwijotomo, Abdurahman and Abdullah, Mohd Azman and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Hardware-in-the-loop simulation for automatic rack and pinion steering system. Applied Mechanics and Materials, 229-231. pp. 2135-2139. ISSN 1660-9336

Mohammed, Mahbubul Islam and Shikh Anuar, Fadhilah and Rahman, Saidur and Leong, Kin Yuen and Muhammad Afifi, Amalina (2013) Thermophysical Properties And Heat Transfer Performance Of Al2O3/R-134a Nanorefrigerants. International Journal Of Heat And Mass Transfer, 57. pp. 100-108. ISSN 0017-9310

Mohd, Hadzley and Nurul, Fatin and Raja, Izamshah and Hussein, Nur Izan Syahriah and Siti, Sarah and Subramonian, Sivarao (2014) Surface Integrity of a High Speed Milling FC300 Gray Cast Iron. Applied Mechanics and Materials. pp. 642-646. ISSN 1660-9336

Mohd Annuar, Khalil Azha and Ab Hadi, Nik Azran and Mohamad Sapiee, Mohd Razali and Harun, Mohamad Haniff and Saadon, Intan Mastura (2018) Implementation Of PS2 Remote Control And Monitoring System For Android Operating System Based Robot Platform. Journal Of Engineering And Applied Sciences, 13. pp. 1851-1858. ISSN 1816-949X

Mohd Annuar, Khalil Azha and Fahmi, Muhammad and Quah, Jit Shen (2018) Efficient Object Isolation In Complex Environment Using Manipulation Primitive On A Vision Based Mobile 6DOF Robotic Arm. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18. pp. 50-56. ISSN 2227-2771

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Abdullah, Shahrum Shah and Lee, Dai Cong and Lim , Wee Teck and Ali, Fara Ashikin and Othman, Muhammad Nur (2015) Study On The Effect Of Shifting 'Zero' In Output Membership Function On Fuzzy Logic Controller Of The Rov Using Micro-Box Interfacing. Jurnal Teknologi, 74 (9). pp. 119-128. ISSN 0127-9696

Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Nor Azmi, Muhammad Wahyuddin and Harun, Mohamad Haniff and Bahar, Mohd Bazli and Mohd Shah, Hairol Nizam and Husni, Ahmad Faiez (2018) Comparison of controllers design performance for underwater remotely operated vehicle (ROV) depth control. International Journal Of Engineering & Technology, 7. pp. 419-423. ISSN 2227-524X

Mohd Daud, Mohd Ahadlin (2010) Effect of Solution Treatment on Fatigue Crack Propagation Behaviour of Magnesium Alloy. International Review of Mechanical Engineering, 4 (3). pp. 238-243. ISSN 1970-8734

Mohd Daud, Mohd Ahadlin (2009) Effect of Solution Treatment on Fatigue Properties of Magnesium Alloy. International Journal of Mechanical and Materials Engineering (IJMME), 4 (2). pp. 105-108. ISSN 1823-0334

Mohd Daud, Mohd Ahadlin and Din, Abdul Talib and Jusoff, Kamaruzzaman and Selamat, Mohd Zulkefli (2013) Precipitation strengthening in extruded AZ61 magnesium alloys during heat treatment process. World Applied Sciences Journal, 21 (SI). pp. 41-46. ISSN 1818-4952

Mohd Daud, Mohd Ahadlin and Nasir, Nurulhilmi Zaedah and Rivai, Ahmad and Selamat, Mohd Zulkefli (2013) Dynamic Fracture Toughness of Magnesium Alloy under Impact Loading Conditions. Procedia Engineering, 53. pp. 639-644. ISSN 1877-7058

Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Noorhazirah, Sunar and Kamaruzaman, Jusoff (2011) controller. The result shows that the proposed controller reduced the overshoot and steady state error of the pneumatic actuator system to no overshoot and 0.025mm respectively. Index terms: System identification, recursive least square, ARX, dead zone compensator, pneumatic actuator. Non-linear Modeling and Cascade Control of an Industrial Pneumatic Actuator System, 5 (8). pp. 465-477. ISSN 1991-8178

Mohd Fua'ad , Rahmat and Syed Salim , Syed Najib and Ahmad ‘Athif, Mohd Faudzi and Zool Hilmi, Ismail (2012) Identification And Non-Linear Control Strategy For Industrial Pneumatic Actuator. International Journal of the Physical Sciences, 7 (17). pp. 2565-2579. ISSN 1992-1950

Mohd Hafidzal, Mohd Hanafi and Mohamad Shukri , Zakaria and Muhammad Zaidan, Abdul Manaf and Mohd Noor Asril, Saadun (2013) Effect of Soot Particle Diameter to Soot Movement in Diesel Engine. Journal of Engineering and Technology. pp. 85-93. ISSN 2180-3811

Mohd Hafidzal, Mohd Hanafi and Roslizar, Aiman and Zakaria, Mohamad Shukri and Saadun, Mohd Noor Asril and Saleman, Abd Rafeq (2013) Analysis of Soot Particle Movement in Diesel Engine under the Influence of Drag Force. Applied Mechanics and Materials, 393. pp. 275-280. ISSN 1660-9336

Mohd Hafidzal, Mohd Hanafi and Wan Mohd Faizal, Wan Mahmood and Muhammad Zaidan, Abdul Manaf and Mohamad Shukri , Zakaria and Mohd Noor Asril, Saadun and Mohd Nur Azmi, Nordin (2013) SOOT PARTICLE TRAJECTORIES OF A DI DIESEL ENGINE AT 18° ATDC CRANKSHAFT ANGLE. Materials Science and Engineering, 50 (012003). pp. 1-6. ISSN 1757-8981

Mohd Hisham, Nordin and Kalaiselvan , Selvaraju and M., Fathullah (2016) Increasing ABB FlexPicker Robot’s Degree Of Freedom (DOF) Using Flexible End Effector. MATEC Web Of Conferences, 78 (01056). pp. 1-8. ISSN 2261-236X

Mohd Khairi, Mohamed Nor and Okubo, Shigenori (2013) The Design of Nonlinear Servo System using Fuzzy Method. IEEJ Transactions on Electronics, Information and Systems. pp. 652-662. ISSN 0385-4221

Mohd Khairi, Mohamed Nor and Okubo, Shigenori (2012) Fuzzy servo control of an inverted pendulum system. Artificial Life and Robotics. pp. 245-250. ISSN 1433-5298

Mohd Najib , Ali Mokhtar and Fairul Azni, Jafar and Ahmad Yusairi, Bani Hashim and Hazman, Hasib and Mohd Nazrin, Muhammad (2013) Analysis of unimorph piezoceramic patches on damped square shaped plate. Applied Mechanics and Materials, 315. pp. 965-971. ISSN 1660-9336

Mohd Nor, Rozilawati and Md Rozali, Sahazati and Chong, Shin Horng (2018) Positioning Control And Operational Evaluation Of A One Mass Rotary System Using NCTF Controller. International Journal Of Engineering & Technology, 7. pp. 111-115. ISSN 2227-524X

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Sharif, Mohd Khairul Anuar and Sopian, Kamaruzzaman and Sulaiman, M. Yusof and Salleh, Elias @ Ilias (2014) Collector Efficiency of the Polymer Solar Collector. Advances in Environmental Biology. pp. 2583-2588. ISSN 1995-0756

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Sopian, Kamaruzzaman and Sulaiman, M. Yusof and Salleh, Elias @ Ilias and Sharif, Mohd Khairul Anuar (2014) Thermal Performance on Unglazed Photovoltaic Thermal Polymer Collector. Advanced Material Research, 911. pp. 238-242. ISSN 1022-6680

Mohd Sa'at, Fatimah Al-Zahrah and Cho, Wei Yang (2016) Oscillatory Flow Across Plates With Different Shape Of Edges. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 8. pp. 77-91. ISSN 2180-1053

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Aras, Mohd Shahrieel and Mohd Ali, Nursabillilah and Wasbari, Faizil and Tengku Anuar, Tengku Muhammad Mahfuz (2017) Sign Detection Vision Based Mobile Robot Platform. Indonesian Journal Of Electrical Engineering And Computer Science, 7 (2). pp. 524-532. ISSN 2502-4752

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Ali, Nursabillilah and Mohd Aras, Mohd Shahrieel and Wasbari, Faizil and Omar, Zakarya Ali Ahmed (2017) A 3D Mapping Of The Surrounding Object Using Stereo-Vision Technique. International Journal of Soft Computing and Engineering (IJSCE), 12 (1). pp. 59-65. ISSN 1816-9503

Mohd Tahir , Musthafah and Yamada , Noboru (2010) Thermodynamic Analysis of Expansion Profile for Displacement-type Expander in Low-temperature Rankine Cycle. Journal of Thermal Science and Technology, 5 (1). pp. 61-74. ISSN 1880 - 5566

Mohd Zamberi, Mahanum and ANI, FARID NASIR and Herawan, Safarudin Gazali (2014) The effects of alkaline catalysts in used frying oil biodiesel on the diesel engine performances. Applied Mechanics and Materials, 554. pp. 449-453. ISSN 1662-7482

Munawar, Rose Farahiyan and Arif, Afraha Baiti and Wan Abdullah Shani, Wan Nur Fateehah and Mohd Abid, Mohd Asyadi Azam and Abd Manaf, Mohd Edeerozey and Abu, Maisarah and Zainal Abidin, Muhammad Zaimi and Ismail , Syahriza (2016) A Facile Coating Method for Superhydrophobic Magnetic Composite Sheet from Biodegradable Durian Peel for Electromagnetic Wave Absorbance Application. Key Engineering Materials, 694. pp. 39-43. ISSN 1662-9795

Munir, F.A. and Azmi, M.I.M and Zin, M.R.M and Salim, M.A. and Sidik, N.A.C (2011) Application of lattice boltzmann method for lid driven cavity flow. International Review of Mechanical Engineering, 5 (5). pp. 856-861. ISSN 1970-8734

Munir, F.A and Sidik, N.A.C and N.I.N, Ibrahim (2011) Numerical Simulation of Natural Convection in an Inclined Square Cavity. Journal of Applied Sciences, 11 (2). pp. 373-378. ISSN 1812-5654

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Shuhimi, Fairuz Fazillah and Muhammad, Noryani (2017) Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material. Industrial Lubrication And Tribology, 69 (2). pp. 259-266. ISSN 0036-8792

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Noritsugu, Umehara (2014) Materials Selection for Eco-Aware Lightweight Friction Material. Mechanics & Industry. pp. 279-285. ISSN 2257-7777

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli bin and Shuhimi, Fairuz Fazillah and Ismail, N. and Amiruddin, Hilmi and Umehara, Noritsugu (2015) Selection and verification of kenaf fibres as an alternative friction material using weighted decision matrix method. Materials and Design, 67. pp. 577-582. ISSN 0261-3069

Mustafa, Nur Hanim and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Malek, F (2014) Energy Monitoring Based On Human Activity In The Workplace. Journal Of Physics : ConferenceSeries, 495 (-). pp. 1-9. ISSN -

Mustafa, Nur Hanim and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Malek, F (2014) A Survey On Human Behavior Towards Energy Efficiency For Office Worker In Malaysia. Journal Of Physics : ConferenceSeries, 495 (-). pp. 1-10. ISSN -

Mustaffa Albakri, Ammar Alfaiz and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah and Rusnandi, Herdy and Mohd Adrinata, Shaharuzaman and Mansor, Muhd Ridzuan (2012) Design and Development of UTeM Perodua Eco-challenge Vehicle. Applied Mechanics and Materials, 165. pp. 202-208. ISSN 1660-9336

N., Mamat and Kasrul, Abdul Karim and Zulkifilie, Ibrahim and Siti Azura, Ahmad Tarusan (2014) Design And Analysis Of Bearingless Permanent Magnet Synchronous Motor. International Journal Of Energy And Power Engineering Research (IJEPER), 2. pp. 11-16. ISSN 2289-5620

Nirmal, Umar and Albawab, Tarek Mhd Moataz and Halim, Isa and Ahmed Salem, Mohammed and Elsayed, Mahmoud and Singh, Jasspeed (2018) A review on tribological wear test rigs for various applications. International Journal Of Integrated Engineering, 10. pp. 202-217. ISSN 2600-7916

Noorhazirah, Sunar and Mohd Fua'ad , Rahmat and Zool Hilmi, Ismail and Ahmad 'Athif , Mohd Faudzi and Syed Salim , Syed Najib (2014) Model Identification And Controller Design For An Electro-Pneumatic Actuator System With Dead Zone Compensation. INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, 7 (2). pp. 798-817. ISSN 1178-5608

Nooririnah, Omar and muhamad azwar, azhari and Umar , Al-amani and Yusliza, Yusuf (2015) High pressure cold spray (hpcs) process as coating treatment for magnesium chassis: an overview. Applied Mechanics and Materials, 695. pp. 64-68. ISSN 1660-9336

Nor Azwadi Che Sidik, N.A.C Sidik and Fudhail Abdul Munir, F.A. Munir (2012) Mesoscale Numerical Prediction of FLuid FLow in a Shear Driven Cavity. Arabian Journal for Science and Engineering, 37 (6). pp. 1723-1735. ISSN 13198025

Norhidayah, Hashim and Seri Rahayu , Kamat and Isa, Halim and Mohd Shahrizan, Othman (2014) A study on push-pull analysis associated with awkward posture among workers in aerospace industry. International Journal of Research in Engineering and Technologye, 3 (1). pp. 233-239. ISSN ISSN: 2319-1163

Norihan, Abdul Hamid and Majlis, Burhanuddin Yeop and Yunas, Jumril and Ahmad Radzi, Syafeeza and Wong, Yan Chiew and Ibrahim , Mazree (2016) A Stack Bonded Thermo-Pneumatic Micro-Pump Utilizing Polyimide Based Actuator Membrane For Biomedical Applications. Microsystem Technologies, 22 (5). pp. 1-9. ISSN 0946-7076

Nortazi, Sanusi and Azami, Zaharim and Sohif, Mat (2016) Wind Energy Potential: A Case Study Of Mersing, Malaysia. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7712-7716. ISSN 1819-6608

Nurfaizey , Abdul Hamid and Stanger, Jonathan and Tucker, Nick and Buunk, Neil and Wallace, Andrew and Staiger, Mark (2012) Manipulation of electrospun fibres in flight: the principle of superposition of electric fields as a control method. Journal of Materials Science, 47 (3). pp. 1156-1163. ISSN 1573-4803

Nurfaizey , Abdul Hamid and Stanger, Jonathan and Tucker, Nick and Buunk, Neil and Wood, Alan R. and Staiger, Mark (2014) Control of spatial deposition of electrospun fibre using electric field manipulation. Journal of engineered fibers and fabrics, 9 (1). pp. 155-164. ISSN 1558-9250

O, Rostam and Subramonian, Sivarao and SAID, MD RADZAI (2014) Temperature effects on urea granules process to produce paddy fertilizer using top spray fluidized bed granulator. International Journal of Enhanced Research in Science Technology & Engineering, 3 (2). pp. 232-236. ISSN 2319-7463

Ohara, Kenji and Masripan, Nor Azmmi and Umehara, Noritsugu and Kousaka, Hiroyuki and Tokoroyama, Takayuki and Inami, Shigeru and Zushi, Koji and Fujita, Masahito (2013) Evaluation Of The Transformed Layer Of DLC Coatings After Sliding In Oil Using Spectroscopic Reflectometry. Tribology International, 65. pp. 270-277. ISSN 0301-679X

Omar, Nooririnah and Azhari, Muhammad azwar and Yusuf, Yusliza (2013) Effect of CO2 Flow Rate on the Synthesis Nanosized Precipitated Calcium Carbonate, PCC. Applied Mechanics and Materials. pp. 72-75. ISSN 1660-9336

Omar, Nooririnah and Abdullah, Rohana (2012) Supersonic particle deposition as potential corrosion treatment method for helicopter part in Malaysia. International journal of advanced research in engineering and technology, 3 (2). pp. 275-279. ISSN 09766480

Ong, K.Y. and SAID, MD RADZAI (2011) A Study on the Deposition of Tin on the Contac ts Subjected to High Frequency Impac t Loading in Semiconductor Device Testing. Journal of Mechanical Engineering and Technology, 3 (1). pp. 1-9. ISSN 2180-1053

Ong, Yee Teng and Chong, Shin Horng and Hee, Wai Keat (2015) Positioning Control Of XY Table Using 2DOF PID Controller. Applied Mechanics And Materials, 761. pp. 137-141. ISSN 1662-7482

Ong, Yee Teng and Chong , Shin Horng and Hee , Wai Keat (2014) Positioning control of XY table using 2-DOF PID controller. Applied Mechanics and Materials, 761. pp. 137-141. ISSN 1660-9336 (In Press)

Osman, Edynoor and Abd Rashid , Mohd Warikh and Abd Manaf, Mohd Edeerozey and Mohamad, Effendi and Salleh, Mohd Rizal and Ito, Teruaki and Moriga, Toshihiro (2016) Hygrothermal Effect on Mechanical and Thermal Properties of Filament Wound Hybrid Composite. Journal of Advanced Manufacturing Technology (JAMT) . pp. 1-12. ISSN 1985-3157

Osman, Mohd Hairizal and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain (2017) A Study Of Optimization For Surface Finish On Drilling Process Of AISI D2 Tool Steel. International Journal Of Applied Engineering Research, 12. 9644-9652 . ISSN 0973-4562

Patakor, Fizatul Aini and Jantan, Normah and Sulaiman, Marizan and Salleh, Zulhisyam (2017) Auto-Tuning Sliding Mode Contol For Induction Motor Drives. Ieee Xplore. pp. 77-82. ISSN -

Pay, Jun Liew and Jingsi, Wang (2019) Repair Of Ultrasonic Machining Induced Surface/Subsurface Cracks By Laser Irradiation. Optics & Laser Technology, 111. pp. 497-508. ISSN 0030-3992

Poh, Kiat Ng and Ka, Xuan Chai and Shiong, Lung Leh and Meng, Chauw Bee and Qiao, Hui Boon and Saptari, Adi (2014) Applying Clockwise And Counterclockwise Torque Directions In Pinch Grips : A Descriptive Study. Applied Mechanics and Materials, 465-46 (-). pp. 1170-1174. ISSN 1660-9336

Pokaad, Alif Zulfakar and Khisbullah , Hudha and Md Radzai , Said (2013) Usage of Magnetorheological Damper in Active Front Bumper System for Frontal Impact Protection. Applied Mechanics and Materials, 315. pp. 40-44. ISSN 1662-7482

Pokaad, Alif Zulfakar and SAID, MD RADZAI and Ahmad, Fauzi and Kamaruddin, Mohd Nazeri (2014) Simulation on Force Tracking Control of a Magnetorheological Damper under Impact Loading. Applied Mechanics and Materials, 663. pp. 158-162. ISSN 1662-7482

Putra, Azma (2013) The Effect of Uncertainty in the Excitattion on the Vibration Input Power to a Structure. Advance in Acoustics and Vibration, 2013. pp. 1-18. ISSN 1687-627X

Putra, Azma (2012) Effects of Structural Parameters on the Dynamics of a Beam Structure with a Beam-Type Vibration Absorber. Advance in Acoustics and Vibration, 2012. pp. 1-10. ISSN 1687-627X

Putra, Azma (2011) Radiation efficiency of unbaffled and perforated plates near a rigid reflecting surface. Journal of Sound and Vibration, 330. pp. 5443-5459. ISSN 0022-460X

Putra, Azma (2010) Sound radiation from rectangular baffled and unbaffled plates. Applied Acoustics, 71. pp. 1113-1125. ISSN 0003-682X

Putra, Azma and Ayob, Md Razali (2011) Sound Transmission Loss of a Double-Leaf Solid-Microperforated Partition Under Normal Incidence of Acoustic Loading. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 12 (3). pp. 162-174. ISSN 1511-788X

Putra, Azma and Ismail, Ahmad Yusuf and ramlan, roszaidi and Ayob, Md Razali and Sajidin, Muhammad (2013) Normal incidence of sound transmission loss of a double-leaf partition inserted with a micro-perforated panel. Advance in Acoustics and Vibration. pp. 1-24. ISSN 1687-627X

Putra, Azma and Munawir, Al and Mohamad, W. M. F. W. and Mohammad, J. I (2014) The Effect of Direct Field Component on A Statistical Energy Analysis (SEA) Model. Applied Mechanics and Materials, 471. pp. 279-284. ISSN 1660-9336

Putra, Azma and Ramlan, Roszaidi and Suhaimi, Khalis (2014) Translational-rotary frequency up conversion vibration based energy harvesting device for human body motion. Applied Mechanics and Materials, 471. pp. 349-354. ISSN 1660-9336

Putra, Azma and Rivai, Ahmad and Mun, Wai C. and Muhammad, Noryani (2014) Preliminary Investigation On The Perforated Panel Mobility Using Finite Element Method. Applied Mechanics and Materials, 471. pp. 341-346. ISSN 1660-9336

Putra, Azma and Sajidin, Muhammad and Salleh, Norliana (2014) Modelling the Effect of Flexural Vibration on Sound Absorption of A Micro-perforated Panel Using Wave Propagation Method. Applied Mechanics and Materials, 471. pp. 255-260. ISSN 1660-9336

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Mathematical formulation for bending moment wave in non-dispersive finite rod. International Review of Mechanical Engineering. pp. 523-530. ISSN 1970-8734

Putra, Azma (2012) Experimental Investigation on the Effect of Container Geometry Change to Liquid Sloshing. Applied Mechanics and Materials, 165. pp. 160-164. ISSN 1660-9336

Putra, Azma (2012) On a simple technique to measure the airborne noise in a car interior using substitution source. International Journal of Vehicle Noise and Vibration, 8 (3). pp. 275-287. ISSN 1479-148X

Putra, Azma (2011) Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method. Advanced Science Letters, 19 (1). pp. 142-146. ISSN 1936-6612

Putra, Azma (2010) Sound radiation from perforated plates. Journal of Sound and Vibration, 329. pp. 4227-4250. ISSN 0022-460X

Putra, Azma (2013) Utilizing Sugarcane Wasted Fibers As A Sustainable Acoustic Absorber. Procedia Engineering, 53. pp. 632-638. ISSN 1877-7058

Putra, Azma and ABDULLAH, Mohd Azman and Salim, Mohd Azli (2014) Linear and Angular Displacement Relationship of Natural Rubber Engine Isolator. Applied Mechanics and Materials. pp. 250-253. ISSN 1660-9336

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Salleh, Nor Liana (2013) Biomass from paddy waste fibers as sustainable acoustic material. Advances in Acoustics and Vibration, 2013. pp. 1-8. ISSN 1687-627X

Putra, Azma and Abdullah, Yasseer and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Salleh, Nor Liana (2013) Biomass from paddy waste fibers as sustainable acoustic material. Advances in Acoustics and Vibration, 2013. pp. 1-7. ISSN 1687-627X

Putra, Azma and Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris (2014) Prediction of Waste Heat Energy Recovery Performance in a Naturally Aspirated Engine Using Artificial Neural Network. ISRN MECHANICAL ENGINEERING. pp. 1-6. ISSN 2090-5130

Putra, Azma and Ismail, Ahmad Yusuf (2014) Normal Incidence of Sound Transmission Loss from Perforated Plates with Micro and Macro Size Holes. Advances in Acoustics and Vibration. pp. 1-12. ISSN 1687-627X

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2013) SOUND TRANSMISSION LOSS OF A DOUBLE-LEAF PARTITION WITH MICRO-PERFORATED PLATE INSERTION UNDER DIFFUSE FIELD INCIDENCE. International Journal of Automotive and Mechanical Engineering (IJAME), 7 (Januar). pp. 1086-1095. ISSN ISSN: 2180-1606

Putra, Azma and Kassim, Dayang H. and YAAKOB, MOHD YUHAZRI and Abdullah, Y and Muhammad, Nor S. and Jenal, Rustamreen and Nor, Mohd Jailani M. (2013) ASSESSMENT OF THE ACOUSTICAL PERFORMANCE IN MALACCA MOSQUE,MALAYSIA: A CASE STUDY ON THE SAYYIDINA ABU BAKAR MOSQUE. Proceedings of the 20th International Congress on Sound & Vibration. pp. 1-8. ISSN 2329-3675

Putra, Azma and Kassim, Dayang H. and Yakoob, Mohd. d and Nor, M. J. M (2013) Study on the Use of Micro-Perforated Panel to Improve Acoustic Performance in Mosque. Applied Mechanics and Materials, 393. pp. 971-975. ISSN 1660-9336

Putra, Azma and Muhammad, Noryani and Shyafina, Nurain and Thompson, David J. (2013) RADIATION EFFICIENCY OF A PERFORATED PANEL MODELLED USING ELEMENTARY SOURCE TECHNIQUE. Proceedings of the 20th International Congress on Sound & Vibration. pp. 1-8. ISSN 2329-3675

Putra, Azma and Munir, Fudhail (2012) On a simple technique to measure the airborne noise in a car interior using substitution source. International Journal of Vehicle Noise and Vibration, 8 (3). pp. 275-287. ISSN 1479-148X

Putra, Azma and Norfarizan, Siti and Samekto, H and Salim, Mohd Azli (2014) Static Analysis of a Laminated Rubber-Metal Spring Using Finite Element Method. Advanced Materials Research, Vol. 8. pp. 86-90. ISSN 1662-8985

Putra, Azma and Saari, Noor Fariza and Bakri, Hairul and Ramlan, Roszaidi and Mat Dan, Reduan (2013) Characterisation of structure-borne sound source using reception plate method. The Scientific World Journal, 2013. pp. 1-9. ISSN 1537-744X

Putra, Azma and Safarudin Gazali , Herawan and Abdul Hakim, Rohhaizan and Ahmad Faris , Ismail (2014) Prediction of Waste Heat Energy Recovery Performance in a Naturally Aspirated Engine Using Artificial Neural Network. ISRN MECHANICAL ENGINEERING, 2014. pp. 1-6. ISSN 2090-5130

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Analysis of Axial Vibration in the Laminated Rubber-Metal Spring. Advanced Materials Research, 845. pp. 46-50. ISSN 1662-8985

Putra, Azma and Salim, Mohd Azli and ABDULLAH, Mohd Azman (2014) Predicted Transmissibility of an Experimental Approach for a Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8 (4). pp. 104-110. ISSN 1995-0748

Putra, Azma and Shyafina, Nurain and Muhammad, Noryani and Bakri, Hairul and Saari, Noor Fariza (2014) Development of hybrid semi-analytical and finite element analysis to calculate sound radiation from vibrating structure. Advanced Materials Research, 845 (2014). pp. 71-75. ISSN 1662-8985

Putra, Azma and Squicciarini, Giacomo and Thompson, David J. and Zhang, Xianying and Salim, Mohd Azli (2015) Use of a reciprocity technique to measure the radiation efficiency of a vibrating structure. Applied Acoustics, 89. pp. 107-121. ISSN 0003-682X

Putra, Azma and Susilo, Sidik (2013) Modeling of Dynamic Response of Beam-Type Vibration Absorbing System Excited by a Moving Mass. International Review of Mechanical Engineering. pp. 813-820. ISSN 1970-8734

Puvanasvaran, A. Perumal and Al Amin, Mohamed Sultan and Mohd Syaiful Rizal, Abdul Hamid and Norazlin, Nasir (2014) Exploratory The Transitional Impact From Lean Production To Open Source. Science International (Lahore), 26 (5). pp. 1697-1702. ISSN 1013-5316

RAJA ABDULLAH, RAJA IZAMSHAH and YAAKOB, MOHD YUHAZRI and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Subramonian, Sivarao (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials , 315 (2013). pp. 773-777. ISSN 1662-7482

RIDHWAN, JUMAIDIN and Rafidah , Hasan and Zulfattah, Z. (2013) EFFECT OF AGING ON THE MICROSTRUCTURES AND MECHANICAL PROPERTIES OF C102 COPPER ALLOY. Journal of Engineering and Technology, 4 (2). pp. 115-124. ISSN 2180-3811

Rafidah, Hasan and Mines, Robert and Fox, Peter (2011) Characterization of selectively laser melted Ti-6Al-4 V micro-lattice struts. Procedia Engineering , 10. pp. 536-541. ISSN 1877-7058

Rahmalan, Hidayah and Chong, Wei Shin and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Zainal Abidin, Zaheera and Shibghatullah, Abdul Samad and Naim @ Mohayat, Mohd Hariz (2018) Edutainment Tools For Deaf And Impairment Hearing Children : A Survey. Advanced Science Letters, 4. pp. 1805-1808. ISSN 1936-6612

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mansor, Muhd Ridzuan and Mat Yamin, Ahmad Kamal and tamaldin, noreffendy (2014) Design and Development of Light Weight Engine Mounting for UTeM Formula Varsity Race Car. Applied Mechanics and Materials. pp. 484-488. ISSN 1660-9336

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Aparow, Vimal Rau and Tamaldin, Noreffendy (2013) Modelling and Torque Tracking Control of Permanent Magnet Synchronous Motor For Hybrid Electric Vehicles. International Journal of Automotive and Mechanical Engineering , 7. pp. 955-967. ISSN 2229-8649 (Print); 2180-1606 (Online)

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy and Aparow, Vimal Rau and Jamaludin, Hishamuddin (2016) Simulation of Hybrid Electric Vehicle based on a Series Drive Train Layout. Jurnal Teknologi, UTM, 78 (6). pp. 211-221. ISSN 0127-9696

Raja Abdullah, Raja Izamshah and Yuhazri, Yaakob and Mohd , Hadzley and Mohd , amran and Sivarao, Subramonian (2013) Effects of End Mill Helix Angle on Accuracy for Machining Thin-Rib Aerospace Component. Applied Mechanics and Materials, 315. pp. 773-777. ISSN 1660-9336

Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985

Raja Abdullah, Raja Izamshah and J.P.T. , Mo and S., Ding and A Rahman, Muhamad Arfauz and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir (2014) Effect Of Parameter Condition On Surface Roughness For Machining AISI D2 Hardened Tool Steel. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 47-56. ISSN 1985-3157

Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659

Raja Abdullah, Raja Izamshah and Mohd Zakaria, Muhammad Akmal and Kasim, Mohd Shahir and Mohamed, S.B. (2018) Experimental Analysis On Parameters Affecting The Material Removal Rate In Wire Electrical Discharge Turning Using The Taguchi Method. International Journal Of Mechanical & Mechatronics Engineering (IJMME), 18 (05). pp. 75-82. ISSN 2227-2771

Raja Abdullah, Raja Izamshah and Yu, Aaron Lung and Mohamad, Effendi and Mohd Abid, Mohd Asyadi 'Azam and Sulaiman, Mohd Amri and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi (2015) Optimization Of Milling Parameter For Untreated And Heat Treated Polyetheretherketones (PEEK) Biomaterials. Applied Mechanics And Materials, 761. pp. 293-297. ISSN 1662-7482

Ramlan, Roszaidi and Brennan, Michael John and Mace, Brian and Stephen, Burrow (2012) On the performance of a dual-mode non-linear vibration energy harvesting device. Journal of Intelligent Material Systems, 23 (13). pp. 1423-1432. ISSN 1244-3017

Ramlan, Roszaidi and Brennan, Michael John and Mace, Brian R. (2011) On the optimum parameters of a device for harvesting energy from running and walking. Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering, 225 (4). pp. 510-521. ISSN 0959-6518

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Thamburaja, P. and Ahmad, Muhamad Arif Fadli and Koh, Ko Seng (2017) An Investigation Of Modal Analysis For Al6061 Between Piezoelectric Film Sensor And Accelerometer. Journal of Built Environment, Technology and Engineering, 2. pp. 112-121. ISSN 0128-1003

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Mohammad Rasani, Mohammad Rasidi and Abdullah, Shahrum and Kho, Ko Seng (2017) Modal Analysis Study On Aluminum 6061 Using Accelerometer And Piezoelectric Film Sensor. International Journal of Applied Engineering Research, 12 (5). pp. 787-792. ISSN 0973-4562

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Salleh, Mohd Shukor and Md Basar, Mohd Farriz (2017) The Study Of EMA Effect On Modal Identification: A Review. Journal Of Mechanical Engineering Technology, 9 (1). pp. 103-121. ISSN 2180-1053

Ranjit, S.S.S. and Anas, S.A. and Tan, CheeFai (2011) Off-Grid System Development for House Car Pouch Lighting. International Journal of Soft Computing and Engineering (IJSCE). pp. 179-184. ISSN 2231-2307

Ridhwan, J. and Hafidzal, M.H.M and Zakaria, Mohamad Shukri and Muhammad, Syafiq (2014) Effect Of Cooling Rate On Microstructures And Mechanical Properties Of C102 Copper Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 6 (1). pp. 87-94. ISSN 2180-1053

Ridhwan, J. and Selamat , M.Z. and Zulfattah, Z. (2013) Effect of Cooling Rate on The Microstructures And Hardness Of Fe-Ni-Cr Superalloy. Journal of Mechanical Engineering and Technology, 5 (1). pp. 45-57. ISSN 2180 – 1053

Ridhwan, J. and Zulfattah, Z. and Selamat, Mohd Zulkefli and Hafidzal, M.H.M (2013) EFFECT OF AGING TREATMENT ON THE MICROSTRUCTURES AND HARDNESS OF Fe-Ni-Cr SUPERALLOY. International Journal of Automotive and Mechanical Engineering, 8 (1). pp. 1430-1411. ISSN 2180-1606

Roseli, Adnan and Zainol, Sabri Adlan and Abdul Munir, Fudhail and Mohamad Nasir, Asnawi (2018) Experimental Study On The Effect Of Intake Air Temperature On The Performance Of Spark Ignition Engine Fueled With Hydrogen Peroxide. ARPN Journal Of Engineering And Applied Sciences, 13. pp. 3388-3394. ISSN 1819-6608

Rozaimi, Ghazali (2016) Analysis Of 3D Gantry Crane System By PID And VSC For Positioning Trolley And Oscillation Reduction. Jornal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 139-143. ISSN 2180-1843

Rozaimi, Ghazali (2016) An Experimental Of 3D Gantry Crane System In Motion Control By PID And PD Controller Via PFPSO Optimization. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 133-137. ISSN 2180-1843

Rozaimi, Ghazali (2016) Optimization Of Sliding Mode Control Using Particle Swarm Algorithm For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 71-76. ISSN 2180-1843

Rozaimi, Ghazali (2016) PID Control Tuning Using PSO For Prosthetic Hand System. International Journal Of Applied Engineering Research, 11. pp. 10274-10280. ISSN 0973-4562

Rozaimi, Ghazali (2016) Position Tracking Optimization For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 1-6. ISSN 2180-1843

S. G. Herawan and M. S. Hadi and Md. R. Ayob and Putra, Azma (2013) Characterization of Activated Carbons from Oil-Palm Shell by CO2 Activation with No Holding Carbonization Temperature. The Scientific World journal, 2013. pp. 1-6. ISSN 1537-744X

S. Thiru, Chitrambalam and Manimaran, Selvam and T., Joseph Sahaya Anand (2014) Characterization of orifice gas flow through a tubular, coated consumable welding electrode by CFD analysis. Science International, 26 (5). pp. 1773-1778. ISSN 1013-5316

S.A, Fadhilah and I., Hidayah and M.Z, Hilwa and H.N , Faizah and R.S, Marhamah (2013) Thermophysical properties of Copper/Water nanofluid for automotive cooling system – Mathematical modeling. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (2). pp. 1-10. ISSN 2180-1053 (Submitted)

S.A. , Fadhilah and R.S., Marhamah and A.H.M., Izzat (2014) Copper Oxide Nanoparticles for Advanced Refrigerant Thermophysical Properties: Mathematical Modeling. Journal of Nanopaticles. pp. 1-5. ISSN Hindawi Publishing Corporation

SAID, MD RADZAI and Tan, CheeFai (2013) Contaminants on Electrical Contacts Used in Semiconductor Device Testing. World Applied Sciences Journal. pp. 1352-1354. ISSN 1818-4952

Saadun, Mohd Noor Asril and Abdul Manaf, Muhammad Zaidan and Zakaria, Mohamad Shukri and Mohd Hanafi, Mohd Hafdizal (2013) The effect of different aspect ratio and bottom heat flux towards contaminant removal using numerical analysis. IOP Conf.Series:Materials Scienceand Engineering, 50. pp. 1-10. ISSN 1757-8981

Saadun, Mohd Noor Asril and Mokhtar, Nur Hazwani and Zakaria, Mohamad Shukri and Abdul Manaf, Muhammad Zaidan and Mohd Hanafi, Mohd Hafidzal (2013) Numerical Analysis on the Effects of Cavity Geometry with Heat towards Contaminant Removal. Applied Mechanics and Materials, 393. pp. 851-856. ISSN 1662-7482

Saat, Shahrizal and Fikri, Mohd Nabil and Mohd Tumari, Mohd Zaidi and Abdul Kadir, Ahmad Muzaffar and Abd Rashid, Wan Norhisyam and Wan Hamat, Wan Hassan (2017) Experiment Of Speed Control For An Electric Trishaw Based On Pid Control Algorithm. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 38-45. ISSN 2227-2771

Sabaruddin, Saiful Akmal and Yusof, Ahmad Anas and Saadun, Mohd Noor Asril and Ghazali, Rozaimi (2017) Application Of Water As Pressure Medium In Hydraulic Hybrid System. Journal Of Engineering And Applied Sciences, 12 (16). pp. 4824-4830. ISSN 1819-6608

Said, M. R and Hasan, Nor Halim and Leman, A.M. (2012) Design of Local Exhaust Ventilation for Spray Booths: Proposed Study. ARPN Journal of Science and Technology, 2 (6). pp. 541-545. ISSN 2225-7217

Said, M. R and Tan, CheeFai (2008) The Response of Aluminium Foams Under Quasi-Static Loading. Chiang Mai J. Sci., 35 (2). pp. 241-249. ISSN 0125-2526

Said, Md Radzai and Hasan, Nor Halim and Leman, A.M. and Abd Rahman, Majahar (2013) Baseline Inspection and Measurement of Local Exhaust Ventilation (LEV) Systems at Spray Booth in Manufacturing Plant. The Journal of Selcuk University Natural and Applied Science, ICOEST (Specia). pp. 637-647. ISSN 2147-3781

Said, Md Radzai and Yuhazri, Yaakob and Lau, Saijod T.W. (2012) The Finite Element Analysis On Hexagonal Ring Under Simple Lateral Loading. Global Engineers & Technologists Review, 2 (2). pp. 1-7. ISSN 2231-9700

Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classic Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation (IJCA), 9 (4). pp. 301-312. ISSN -

Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classical Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation, 9 (4). pp. 301-312. ISSN 2005-4297

Saleman, Abdul Rafeq and Zulfattah, Z. M. and Najib, M. Ali and Rody, M. Z. M and Fadhli, Syahrial and Abdollah, Mohd Fadzli bin and Hanafi, M.H.M (2013) Preliminary Study of CST in Malaysia based on Field Optical Efficiency. Procedia Engineering , 68. pp. 238-244. ISSN 1877-7058

Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir , Fudhail (2011) PID Controller for Vibration Reduction and Performance Improvement of Handheld Tools. International Journal of Mechanical and Mechatronics Engineering, 11 (2). pp. 7-16. ISSN 2077-124X

Salim, Mohd Azli and Noordin, Aminurrashid and Akop, Mohd Zaid (2011) Development of a Free-Free Transverse Beam Model Using Lateral Vibrations of Beam Conventional Method during Seismic Activity. Journal of Mathematics Research, 3 (3). pp. 77-82. ISSN 1916-9795

Salim, Mohd Azli and Noordin, Aminurrashid and Mohamad Zin, Mohd Rody and Karjanto, Juffrizal (2011) The New Generation of Building Control Concept to Suppress the Horizontal Vibration during the Earthquake. Australian Journal of Basic and Applied Sciences, 5 (4). pp. 16-25. ISSN 1991-8178

Salim, Mohd Azli (2011) Mathematical Modeling of Structural Integrity on High Rise Building Using Parallel Axis Theorem and Finite Element Analysis. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 73-82. ISSN 2010-1791

Salim, Mohd Azli and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Jusoff, Kamarulzaman and Md Zin, Mohd Zarhamdy (2013) Modeling, Simulation and Verification of Parameters Study on Flexible Automotive Wiper. Advanced Science Letters, 19 (1). pp. 106-112. ISSN 1936-6612

Salim, Mohd Azli and Abd Munir, Fudhail and Abdul Halim , Nur Baiduri (2012) Development an Experimental Rig of High Rise Building to Suppress a Vertical Vibration during Earthquake Phenomena. International Review of Civil Engineering , 3 (2). pp. 111-119. ISSN 2036-9913

Salim, Mohd Azli and Abd Munir, Fudhail and Noordin, Aminurrashid (2012) Experimental Study on Vibration Level of Automotive Flexibel Wiper System. Journal of Engineering and Technology, 3. pp. 123-138. ISSN 2180-3811

Salim, Mohd Azli and Abdul Munir, Fudhail and Razali, Nadlene and Mat Nuri, Nur Rashid and Mohamad Zin, Mohd Rody (2011) Preliminary Study - Analytical Approach in Experimental Rig of Automotive Flexible Wiper System. International Journal of Physical and Mathematical Sciences, 2 (1). pp. 64-72. ISSN 2010-1791

Salim, Mohd Azli and Noordin, Aminurrashid (2011) Implementation of Active Force Control to Reduce Vibration Displacement in Active Mass Damper during Seismic Activity. Journal of Instrument, 2 (1). pp. 1-10. ISSN 2010-1856

Salim, Mohd Azli and Noordin, Aminurrashid (2012) A Study of the Mode Shape Effect in Automobile Braking System. International Review of Mechanical Engineering, 6 (4). pp. 719-723. ISSN 1970-8742

Salim, Mohd Azli and Noordin, Aminurrashid and ABDULLAH, Mohd Azman (2012) Modeling, Simulation and Validation of Tuned Mass Damper for High Rise Structure with Control Scheme to Suppress Dynamic Unbalance Force. Wulfenia Journal, 19 (8). pp. 298-314. ISSN 1561-882X

Salim, Mohd Azli and Noordin, Aminurrashid and Abdul Munir, Fudhail (2011) Development of Low Cost High Rise Building using Austenitic-Ferritic Material in Nano-Scale Environmental Challenges to Sustain a Green. International Review of Mechanical Engineering, 5 (4). pp. 784-791. ISSN 1970-8734

Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Noordin, Aminurrashid and Tee, Boon Tuan (2013) Peak Amplitude Transmission on High-Rise Structure by Implementing TMD Method. Advanced Science Letters, 19 (1). pp. 142-146. ISSN 1936-6612

Salim, Mohd Azli and Putra, Azma and ABDULLAH, Mohd Azman and Thompson, David and Ahmad, Nazirah (2013) Transmissibility of a Laminated Rubber-Metal Spring: A Preliminary Study. Applied Mechanics and Materials. pp. 661-666. ISSN 1660-9336

Salim, Mohd Azli and Putra, Azma and Thompson, David J. and Ahmad, Nazirah and Abdullah, Mohd Azman (2013) Transmissibility of a laminated rubber-metal spring: a preliminary study. Applied Mechanics and Materials, 393. pp. 661-665. ISSN 1662-7482

Salim, Mohd Azli and Nordin, Aminurrashid (2011) Dynamic Response on Free-Free Beam in Driving Point and Transfer Mobility Measurement under Bending Load. Journal of Civil Engineering and Architecture, 5 (3). pp. 248-257. ISSN 1934-7359

Salit, Mohd Sapuan and Mansor, Muhd Ridzuan and Zainudin, Edi Syams and Abd Aziz, Nuraini and Arep @ Ariff, Hambali (2014) Application of integrated AHP-TOPSIS method in hybrid natural fiber composites materials selection for automotive parking brake lever component. Australian Journal of Basic and Applied Sciences, 8 (5). pp. 431-439. ISSN 1991-8178

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2015) Effects of Cu on the microstructures and tensile properties of thixoformed Al-Si alloys. Solid State Phenomena. pp. 91-98. ISSN 1662-9779

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser (2014) The effects of Cu content on microstructure and mechanical properties of thixoformed A319 aluminium alloys. Applied Mechanics and Materials, 548-549. pp. 237-241. ISSN 1660-9336

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser and Alhawari, Khalid Salim (2013) Thermodynamic simulation on thixoformability of aluminium alloys for semi-solid metal processing. International Journal of Mathematics and Computers in Simulation, 7 (3). pp. 286-293. ISSN 1998-0159

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Alhawari, Khalid Salim and Mohammed, Mohamad Naser (2014) Microstructure and mechanical properties of thixoformed A319 aluminium alloy. Materials and Design, 64. pp. 142-152. ISSN 0261-3069

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser (2014) Thermodynamic modelling of Al-Si-Cu alloys for semisolid processing. Sains Malaysiana, 43. pp. 791-798. ISSN 0126-6039

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khalid Salim (2014) Microstructure evolution and mechanical properties of rheocast A319 aluminum alloy using cooling slope. Applied Mechanics and Materials, 663. pp. 261-265. ISSN 1660-9336

Salleh, Mohd Shukor and Omar, Mohd Zaidi (2015) Influence of Cu content on microstructure and mechanical properties of thixoformed Al−Si−Cu−Mg alloys. Transactions of Nonferrous Metals Society of China, 25. pp. 3523-3538. ISSN 1003-6326

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi (2014) The effects of mg addition on the microstructure and mechanical properties of Thixoformed Al-5%Si-Cu alloys. Journal of Alloys and Compounds. pp. 121-130. ISSN 0925-8388

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohamad Naser (2013) An overview of semisolid processing of aluminium alloys. ISRN Materials Sciences. pp. 1-9. ISSN 2356-7872

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Syarif, Junaidi and Mohammed, Mohammed Naser and Alhawari, Khaled Salem (2015) Effect of pouring temperature and cooling slope length on microstructure and mechanical properties of Rheocast A319 aluminium alloy. Applied Mechanics and Materials, 699. pp. 251-256. ISSN 1660-9366

Samat, Khairul Fadzli and Hussein, Mohamed and M.R., Safizadeh (2013) Analysis of Single Actuator for Rehabilitation Device of Leg Weakness. Applied Mechanics and Materials. pp. 1021-1025. ISSN 1660-9336

Samsudin, Abdul Rahim and Hambali, A and Marjom, Zolkarnain and Sivarao, Subramonian and Khairul, A A R (2010) Optimization Design of a Portable Hose Reel Using Integrated Approach. International Conference on Design and Concurrent Engineering. pp. 530-533. ISSN 983-2948-84-1

Samsudin, Sharatul Izah and Sulaiman, Noor Asyikin and Md Yusop, Azdiana and M. Salim, Sani Irwan (2018) A Comparative Study Of Enhanced Nonlinear PI To Multivariable Nonlinear Plant. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 2-7. ISSN 2180-1843

Saptari, Adi and Salleh, Mohd Rizal and Wong, Soon Lai (2011) Jig Design,Assembly Line Design And Work Station Design And Their Effect To Productivity. Jordan Journal of Mechanical and Industrial Engineering, 5 (1). pp. 9-16. ISSN 1995-6665

Sapuan, S.M. and Mansor, Muhd Ridzuan (2014) Concurrent engineering approach in the development of composite products: A review. Materials and Design, 58. pp. 161-167. ISSN 0261-3069

Sarban Singh, Ranjit Singh and Sim, Sau Seong and Anas, Siti Aisyah and Subramaniam, Siva Kumar (2013) Concept Of Increasing Energy Storage Capacity Using Two Energy Banks Via Integrating A Bidirectional Switching System. International Journal of Enhanced Research in Science Technology & Engineering, 2 (3). pp. 1-4. ISSN 2319-7463

Sariman, Mohamad Zaharudin and Harun, Mohamad Hafiz and Ahmad, Fauzi and Md Yunos, Mohd Razali and Mat Yamin, Ahmad Kamal (2015) Vibration Control of a Passenger Car Engine Compartment Model using Passive Mounts Systems. Journal of Engineering and Applied Sciences, 10 (17). pp. 7472-7476. ISSN 1816-949X

Sariman, Mohamad Zaharudin and Harun, Mohamad Hafiz and Mat Yamin, Ahmad Kamal and Ahmad, Fauzi and Md Yunos, Mohd Razali (2015) Magnetorheological Fluid Engine Mounts: A Review on Structure Design of Semi Active Engine Mounting. International Journal of Materials, 2. pp. 6-16. ISSN 2313-0555

Selamat, Mohd Zulkefli and Sahari, Jaafar and Muhamad, Norhamidi and Muchtar, Andanastuti (2011) The Effects of Thickness Reduction and Particles Sizes on the Properties Graphite - Polypropylene Composite. International Journal of Mechanical and Materials Engineering , 6 (2). pp. 194-200. ISSN (ISSN 1823-0334)

Selamat, Mohd zulkefli and Sahari, Jaafar and Muhamad, Norhamidi and Muchtar, Andanastuti (2011) Simultaneous Optimization for Multiple Responses on the Compression Moulding Parameters of Composite Graphite–Polypropylene Using Taguchi Method. Key Engineering Materials, 471-47 (1). pp. 361-366. ISSN 1013-9826

Seri Rahayu , Kamat and Fatihah Ros, Ahmad (2013) A relationship between road conditions, physical and psychophysical experience among occupational drivers. Advanced Engineering Forum, 10 (2013) (1). pp. 345-350. ISSN 103.26.74.254-27/05/14,09:27:37

Shamsudin, Shamsul Anuar (2011) Kinematic Synthesis of Planar, Shape-Changing Rigid Body Mechanisms for Design Profiles with Significant Differences in Arc Length. ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE2011) , 6. pp. 325-334. ISSN 978-0-7918-5483-9

Shamsudin, Shamsul Anuar (2013) A CLOSED-FORM SOLUTION FOR THE SIMILARITY TRANSFORMATION PARAMETERS OF TWO PLANAR POINT SETS. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 5 (1). pp. 59-68. ISSN 2180-1053

Shamsudin, Shamsul Anuar and Murray, Andrew P. and Myszka, David H. and Schmiedeler, James P. (2013) Kinematic synthesis of planar, shape-changing, rigid body mechanisms for design profiles with significant differences in arc length. Mechanism and Machine Theory, 70 (Decemb). pp. 425-440. ISSN 0094-114X

Shamsul Akmar, Ab Aziz and Mohd Zaki, Nuawi and Mohd Jailani, Mohd Nor (2016) Development Of Noise And Vibration Exposure Monitoring System For Malaysian Army (MA) Three-Tonne Trucks. Jurnal Teknologi, 78 (6-10). pp. 9-15. ISSN 0127-9696

Sharin, Ab Ghani (2016) Dielectric Strength Improvement Of Natural Ester Insulation Oil:Optimization Of Mixed Antioxidants Via Two-Level Factorial Design. ARPN Journal Of Engineering And Applied Sciences, 11. pp. 12798-12803. ISSN 1819-6608

Shikh Anuar, Fadhilah and Abdi, Iman Ashtiani and Hooman, Kamel (2018) Flow Visualization Study Of Partially Filled Channel With Aluminium Foam Block. International Journal Of Heat And Mass Transfer, 127. pp. 1197-1211. ISSN 0017-9310

Shikh Anuar, Fadhilah and Abdi, Iman Ashtiani and Odabaee, Mostafa and Hooman, Kamel (2018) Experimental Study Of Fluid Flow Behaviour And Pressure Drop In Channels Partially Filled With Metal Foams. Experimental Thermal And Fluid Science, 99. pp. 117-128. ISSN 0894-1777

Shikh Anuar, Fadhilah and Malayeri, Mohammad Reza and Hooman, Kamel (2017) Particulate Fouling And Challenges Of Metal Foam Heat Exchangers. Heat Transfer Engineering, 38 (7-8). pp. 730-742. ISSN 0145-7632

Shin, Horng Chong and Sato, Kaiji (2014) Practical And Robust Control For Precision Motion : AR-CM NCTF Control Of A Linear Motion Mechanism With Friction Characteristics. IET Control Theory and Applications, 9 (5). pp. 745-754. ISSN 1751-8644

Shueb, Mohammed Iqbal and Abd Manaf, Mohd Edeerozey and Ratnam, Chantara Thevy and Mohamad, Noraiham (2017) INFLUENCE OF SONICATION ASSISTED DISPERSION METHOD ON THE MECHANICAL AND ELECTRICAL PROPERTIES OF NYLON 66/NANO-COPPER NANOCOMPOSITE. Jurnal Teknologi, 79 (5-2). pp. 77-81. ISSN 0127-9696

Shukor, Ahmad Zaki and Fujimoto, Yasutaka (2014) Direct-Drive Position Control Of A Spiral Motor As A Monoarticular Actuator. IEEE Transactions on Industrial Electronics, 61 (2). pp. 1063-1071. ISSN 0278-0046

Sihombing, Haeryip and Rassiah, Kannan and Ashaari, Zaini and M.Y., Yuhazri (2012) An Analysis and Development of Recycled Materials for Wood Plastic Composite Product. Elixir Mechanical Engineering, 51. pp. 10834-10840. ISSN 2229-712X

Sivakumar, Dhar Malingam (2013) Effect of process parameters during forming of self reinforced – PP based Fiber Metal Laminate. Composite Structures, 97. pp. 332-337. ISSN 0263-8223

Sivakumar, Dhar Malingam (2012) Numerical investigation of the effect of temperature on the formability of a thermoplastic fibre metal laminate. Proceedings: the 7th Australasian Congress on Applied Mechanics, ACAM 7. pp. 267-275. ISSN 9781922107619

Sivakumar, Dhar Malingam (2009) Process Variables Optimisation of Polypropylene Based Fibre-Metal Laminates Forming using Finite Element Analysis. Key Engineering Materials, 410-41. pp. 263-269. ISSN 1013-9826

Sivarao, Subramonian and Nanthakumar, Rajoo and Widodo, W. Sapto and Haeryip , Sihombing (2012) Hexane Economization in Palm Kernel oil Plant: A Study After Process Design Improvement. Global Engineers & Technologists Review, 2 (12). pp. 7-14. ISSN 2231-9700

Sivarao, Subramonian and Nur Izan Syahriah, Hussein and Raja Izamshah , Raja Abdullah and Mohd Amran, Md Ali and Mohd , Hadzley (2012) Transforming Linear Laser Cutting machine Into Laser Lathing – An Empirical Investigation & Evaluation of Roundness Quality. Journal of Current Engineering Research, 2 (2). pp. 98-104. ISSN 2250 - 2637

Sivarao, Subramonian and S., Thiru and Jusoff, Kamaruzzaman and Azizah, Shaaban and Mariana, Yusoff and Jano, Zanariah and Yuhazri, Yaakob and HASOLOAN , HAERY IAN PIETER and Abu Bakar, Mohd Hadzley and Raja, Izamshah and Hussein, Nur Izan Syahriah and Mohd Amran, Md Ali and Taufik, , and Wahyono Sapto, Widodo and Tan, CheeFai and Sivakumar, Dhar Malingam (2013) Modelling of CO2 Laser Materials Processing by Networked Neuro-Dimension Fuzzy Intelligent System. Australian Journal of Basic and Applied Sciences, 7 (3). pp. 35-45. ISSN 1991-8178

Sivarao, Subramonian and Sivakumar, Dhar Malingam and Taufik, - and Yuhazri, Yaakob and Tan, CheeFai and Haeryip , Sihombing (2012) An Exploratory Study - Critical Laser Processing of Composite Materials. International Journal of Engineering Research & Technology, 1 (10). pp. 1-8. ISSN 2278-0181

Sivarao, Subramonian (2009) ANFIS Modeling of Laser Machining Responses by Specially Developed Graphical User Interface. International Journal of Mechanical and Mechatronics Engineering, 9 (9). pp. 181-189. ISSN 2077-124X

Sivarao, Subramonian (2004) Comparison of statistical and mathematical methods for determination of tool wear in drilling. Journal of Mechanical Engineering, 55 (4). pp. 187-198. ISSN 0039-2472

Sivarao, Subramonian (2009) GUI Based ANFIS Modeling: Back Propagation Optimization Method for CO2 Laser Machining. International Journal of Intelligent Information Technology Application, 2 (4). pp. 191-198. ISSN 1999-2459

Sivarao, Subramonian (2009) GUI Based Mamdani Fuzzy Inference System Modeling To Predict Surface Roughness in Laser Machining. International Journal of Electrical & Computer Sciences, 9 (9). pp. 281-287. ISSN 2077-1231

Sivarao, Subramonian (2009) Mamdani Fuzzy Inference System Modeling to Predict Surface Roughness in Laser Machining. International Journal of Intelligent Information Technology Application, 2 (1). pp. 12-18. ISSN 1999-2459

Sivarao, Subramonian (2009) Modeling, Testing and Experimental Validation of Laser Machining Micro Quality Response by Artificial Neural Network. International Journal of Engineering & Technology, 9 (9). pp. 161-166. ISSN 2077-1185

Sivarao, Subramonian (2009) Modelling of laser processing cut quality by an adaptive network-based fuzzy inference system. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C - JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 223 (10). pp. 2369-2381. ISSN 0959-6518

Sivarao, Subramonian (2009) A New Approach of Adaptive Network-based Fuzzy Inference System Modeling in Laser Processing-A Graphical User Interface Based. Journal of Computer Science, 5 (10). pp. 704-710. ISSN 1549-3636

Sivarao, Subramonian and Abdul , Zuhair and Raja, izam and Mohd , amran and Nur, izan and Mohd , Hadzley (2012) Taper Quality Evaluation of a Laser Lathed Steel Rod Using Modified Flatbed CO2 Laser Cutting Machine. International Journal of Current Research and Review, 4 (15). pp. 81-91. ISSN 0975-5241

Sivarao, Subramonian and Abdul Rahim , Samsudin and Haeryip , Sihombing and Taufik, , and Yuhazri, Yaakob and Sivakumar, Dhar Malingam and Tan, CheeFai (2012) Promising Techniques of Automotive Engine Lubrication Oil Monitoring System – A Critical Review towards Enhancement. The International Journal of Engineering And Science, 1 (2). pp. 228-233. ISSN 2319 – 1813

Sivarao, Subramonian and Alif, Aziz and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, , and Hambali, A (2013) Finite Element Analysis of Super Energy Saving Locking System Towards Enhancing Door Lock Performance and Security. International Review of Mechanical Engineering, 7 (6). pp. 1147-1151. ISSN 1970-8734

Sivarao, Subramonian and Ammar, Abd Rahman and T., Joseph Sahaya Anand and Salleh, Mohd Shukor (2010) Stochastic Modeling and Optimization of Laser Machining by Response Surface Methodology. International Journal of Engineering & Technology, 10 (04). pp. 13-21. ISSN 2077-1185

Sivarao, Subramonian and Fairuz, Dimin and T., Joseph Sahaya Anand and Jamil, Ridzuan and Ahmad , Kamely (2010) Surface Quality Investigation of Al 6061-T6511 Using TiAlN Coated Milling Tool. International Journal of Basic & Applied Sciences, 10 (4). pp. 55-59. ISSN 2077-1223

Sivarao, Subramonian and Fairuz, Dimin and T. , Joseph Sahaya Anand and Ahmad, Kamely (2010) Investigation of Tangential Force, Horsepower and Material Removal Rate Associating HAAS CNC Milling, Al6061-T6511 Work Material & TiAlN Coated End Mill Tool. International Journal of Basic & Applied Sciences, 10 (4). pp. 23-28. ISSN ISSN: 2077-1223

Sivarao, Subramonian and Mohd Rizal , Salleh and Ahmad, Kamely and Tajul Ariffin, Abdullah and Taufik, - (2011) Mechanical Properties Modification of Polyethylene (PE) for CaCO3 Particulated Composites. Advanced Materials Research, 264-26. pp. 880-887. ISSN 10226680

Sivarao, Subramonian and Nantha, kumar and Taufik, , and Sivakumar, Dhar Malingam and Mohd Amri , Sulaiman and Kassim, M.S (2013) Heat Exchanger Analysis to Reduce Hexane Loss in Palm Kernel Oil Extraction Plant. International Journal of Mechanical and Mechatronics Engineering, 13 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and Nur, Izan and T., Joseph Sahaya Anand and Fairuz, Dimin (2010) Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical Properties. International Journal of Basic & Applied Sciences, 10 (4). pp. 1-6. ISSN 2077-1223

Sivarao, Subramonian and Qumrul, Ahsan and Mohd , amran and Joseph Sahaya Anand, T and Raja Izamshah , Raja Abdullah (2013) Friction Performance Analysis of Waste Tire Rubber Powder Reinforced Polypropylene Using Pin-On-Disk Tribometer. Procedia Engineering . pp. 743-749. ISSN 1877-7058

Sivarao, Subramonian and Rizal, M S and Ahmad , Kamely (2009) An Investigation Toward Development Of Economical Brake Lining Wear Alert System. International Journal of Engineering & Technology, 9 (9). pp. 251-256. ISSN 2077-1185

Sivarao, Subramonian and Robert, Milkey and Samsudin, Abdul Rahim (2013) RSM Modelling and Optimization of CO2 Laser Machining of Industrial PVC Foam. International Review on Modelling and Simulations, 6 (4). pp. 1339-1343. ISSN 1974-9821

Sivarao, Subramonian and S.THIRU,, CHITRAMBALAM and T., Joseph Sahaya Anand and Mariana , Yusof (2013) Establishing a Hybrid Laser Lathing Technology. World Applied Sciences Journal, 21. pp. 53-59. ISSN 1818-4952

Sivarao, Subramonian and Salleh, Mohd Shukor and T., Joseph Sahaya Anand and Abd Rahman, Ammar (2010) DOE Based Statistical Approaches in Modeling of Laser Processing – Review & Suggestion. International Journal of Engineering & Technology IJET-IJENS. pp. 1-8. ISSN 2077-1185

Sivarao, Subramonian and Siva Kumar, Subramaniam and Mazran , Esro and T., Joseph Sahaya Anand (2010) Electrical & Mechanical Fault Alert Traffic Light System Using Wireless Technology. International Journal of Mechanical and Mechatronics Engineering, 10 (4). pp. 19-22. ISSN 2077-124X

Sivarao, Subramonian and T., Joseph Sahaya Anand and Abd Rahman, Ammar and Salleh, Mohd Shukor (2010) RSM Based Modeling for Surface Roughness Prediction in Laser Machining. International Journal of Engineering & Technology, 10 (4). pp. 32-39. ISSN 2077-1185

Sivarao, Subramonian and T., Joseph Sahaya Anand and Hanizam, Hashim and Indra , Devi (2010) Conceptual Designs towards Developing Mechanically Controlled Semi-Automated Grass Cutter. International Journal of Mechanical and Mechatronics Engineering, 10 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and T., Joseph Sahaya Anand and Mohd Warikh, Abd Rashid (2009) Engineering of Tire Pressure Controlling Device: An Invention Towards Successful Product Development. International Journal of Basic & Applied Sciences IJBAS, 9 (9). pp. 261-264. ISSN 2077-1223

Sivarao, Subramonian and T.J.S, Anand and Ariff, Hambali and Minhat, Mohamad and Azni, Faizul (2010) Review of Automated Machines towards Devising A New Approach in Developing Semi-Automated Grass Cutter. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol: 10 No: 04, 10 (4).

Sivarao, Subramonian and Tajul Ariffin, Abdullah (2009) Surface Roughness Prediction in Deep Drilling by Fuzzy Expert System. International Journal of Mechanical and Mechatronics Engineering, 9 (9). pp. 331-335. ISSN 2077-124X

Sivarao, Subramonian and Taufik, , (2009) Machining Quality Predictions: Comparative Analysis of Neural Network and Fuzzy Logic. International Journal of Electrical & Computer Sciences, 9 (9). pp. 451-456. ISSN 2077-1231

Sivarao, Subramonian and Taufik, , and Yuhazri, Yaakob and Haeryip , Sihombing (2012) Critical Review of Electro-Mechanical Door Locking System and Proposal towards Development of Innovative Super Energy Saving Door Locking System. International Journal of Engineering and Innovative Technology, 2 (5). pp. 201-207. ISSN 2277-3754

Sivarao, Subramonian and Thoguluva Raghavan, Vijayaram (2009) Determination of tensile, flexural properties and microstructural characterization of calcium carbonate filler reinforced polypropylene matrix composites. Transactions of The Indian Institute of Metals, 62 (3). pp. 1-4. ISSN 0972-2815

Soh, T.C and Mohamad, Noraiham and Qumrul, Ahsan and Abd Manaf, Mohd Edeerozey (2015) Effects of Filler Hybridization on the Mechanical Properties of NR/SBR/EPDM Rubber Blends. Journal of Advanced Manufacturing Technology (JAMT) , 9 (1). pp. 54-64. ISSN 1985-3157

Subramonian, Sivarao and Abdul Rahim, Samsudin (2014) Comparison between Taguchi Method and Response Surface Methodology (RSM) in modelling CO2 laser machining. Jordan Journal of Mechanical and Industrial Engineering, 8 (1). pp. 35-42. ISSN 1995-6665

Subramonian, Sivarao and Mallisi, R and Teng, L S (2014) Enhanced Tensile properties of Stone wool fiber-reinforced high density polyethylene (HDPE) Composites. Materials Testing, 56. pp. 150-154. ISSN ISSN 0025-5300

Subramonian, Sivarao and Mohamad, Radzai Said and Azizah, Shaaban and Mohd Fairuz, Dimin (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1662-7482

Subramonian, Sivarao and Raguvaran, Jayahkudy and Md Ali, Mohd Amran and T., Joseph Sahaya Anand and Qumrul, Ahsan and Raja, Izamshah (2015) Way forward to halt pressure loss in automotive tyres. Applied Mechanics and Materials, 761. pp. 510-514. ISSN 1660-9336

Subramonian, Sivarao and Robert, Milkey and Samsudin, Abdul Rahim (2013) Taguchi modeling and optimization of laser processing in machining of substantial industrial PVC foam. International Journal of Applied Engineering Research, 8 (12). pp. 1415-1426. ISSN 0973-4562

Subramonian, Sivarao and Ahmad, Kamely and Md Palil, Md Dan (2009) Fuzzy expert system modeling of laser processing. Journal of Advanced Manufacturing Technology, 3 (1). pp. 35-43. ISSN 1985-3157

Subramonian, Sivarao and Omar, Rostam and Mohd Zani, Mohd Hafiz and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Said, Md Radzai and Hassan, Luqman Hakim (2014) Top spray fluidized bed granulated paddy urea fertilizer. Applied Mechanics and Materials, 606. pp. 137-140. ISSN 1660-9336

Sudin, Mohd Nizam (2013) User-Centred Design Approach in Designing Motorcycle Tire Dismounting Tool for One-Handed User. International Journal of Engineering and Technology (IJET), 5 (4). pp. 3588-3595. ISSN 0975-4024

Sudin, Mohd Nizam and Shamsuddin, Shamsul Anuar and Musthafah, Mohd Tahir and Faiz Redza , Ramli (2014) Topology Optimization in Automotive Brake Pedal Redesign. International Journal of Engineering and Technology (IJET), 6 (1). pp. 398-402. ISSN 0975-4024

Sudin, Mohd Nizam (2005) A note on the conceptual design of polymeric composite automotive bumper system. Journal of Materials Processing Technology, 159. pp. 145-151. ISSN 0924-0136

Sudin, Mohd Nizam and ABDULLAH, Mohd Azman and Ramli, Faiz Redza and Musthafah, Mohd Tahir and Shamsudin, Shamsul Anuar (2014) Review of Research on Vehicles Aerodynamic Drag Reduction Methods. International Journal of Mechanical and Mechatronics Engineering, 14 (2). pp. 35-47. ISSN 2077-124X

Sudin, Mohd Nizam and Harun, Mohd Ruzi and Shamsuddin, Shamsul Anuar (2007) A PROTOTYPE OF KBS FOR MATERIAL SELECTION IN BUMPER BEAM DESIGN. Suranaree J. Sci. Technol., 14 (3). pp. 215-222. ISSN x

Sudin, Mohd Nizam and Zamani, Safwan (2013) Conceptual Design of a Motorcycle Tire Dismounting Tool for One-Handed User. Journal of Mechanical Engineering and Technology, 5 (1). pp. 1-10. ISSN 2180-1053

Sudin, Mohd. Nizam and Ramli, Faiz Redza and Tan, CheeFai (2013) FUNCTIONAL MODELLING APPROACH IN THE DESIGN OF AN ELECTRICAL SHOE DRYER. Suranaree Journal of Science and Technology, 20 (4). pp. 279-287. ISSN 0858-849X

Suhaimi, Misha (2014) Comparison Between 2D and 3D Simulations of a Tray Dryer System Using CFD Software. World Applied Sciences Journal, 29 (10). pp. 1301-1309. ISSN 1818-4952

Suhaimi, Misha (2013) Review on the Application of a Tray Dryer System for Agricultural Products. World Applied Sciences Journal, 22 (3). pp. 424-433. ISSN 1818-4952

Suhaimi , Misha (2013) The Prediction of Drying Uniformity in Tray Dryer System using CFD Simulation. International Journal of Machine Learning and Computing, 3 (5). pp. 419-423. ISSN 2010-3700

Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2012) The Study Of Wear Process On Uncoated Carbide Cutting Tool In Machining Titanium Alloy. Journal of Applied Sciences Research. pp. 4821-4827. ISSN 1819-544X

Sulaiman, Marizan and Mohamad Nor, Ahmad Fateh and Omar, Rosli (2015) A GUI Based Teaching And Learning Software For System Sizing Of A Stand-Alone Hybrid Solar Electricity System. Magnt Terearch Report, 3 (6). pp. 72-85. ISSN 1444-8939

Sulaiman, Mohd Amri and Kasim, Mohd Shahir (2014) Effect of high-speed parameters on uncoated carbide tool in finish turning Titanium Ti-6Al-4V ELI. Sains Malaysiana, 43. pp. 111-116. ISSN 0126-6039

Sulaiman, Noor Asyikin and Md Yusop, Azdiana and Samsudin, Sharatul Izah (2010) Solving Tracking Problem Of A Nonholonomic Wheel Mobile Robot Using Backstepping Technique. Journal Of Mechanical Engineering And Technology (JMET), 2 (1). pp. 85-92. ISSN 2180-1053

Sulaiman, Noor Asyikin and Othman, Mohd Fauzi and Abdullah, Hayati (2015) Fuzzy Logic Control Of Centralized Chilled Water System. Jurnal Teknologi, 72. pp. 57-62. ISSN E-ISSN2180-3722

Sulaiman, Saiful Naim and Abu Shah, Ismail and Halim, Mohd Faizal and Tamin, Mohd Nasir (2016) Design And Development Of Auto-Steel Draw Forming Test Device. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 10977-10981. ISSN 1819-6608

Sundaraj, Kenneth and Rabbi, Mohammad Fazle and Ahamed, Nizam Uddin and Alqahtani, Mahdi and Altwijri, Omar and Ghazali , Kamarul Hawari (2017) Investigation Of The EMG-Angle Relationship In The Upper-Limb Muscles During Isometric Contraction. Biomedical Research (India), 28. pp. 2393-2397. ISSN 0970938X

Suresh, Kumar and Sivarao, Subramonian and Guan, Tan Kim and Harun, Fuaida (2010) Influence of Wafer Probing Against Initial Bonding. 34th International Electronic Manufacturing Technology Conference, 2010. pp. 1-8. ISSN 1089-8190

Susilo, Sidik and Putra, Azma and Kok, Swee Leong (2014) Acoustic energy harvesting using flexible panel and PVDF films: a preliminary study. Applied Mechanics and Materials, 554. pp. 712-716.

Susilo, Sidik and Putra, Azma and Kok, Swee Leong (2014) Modeling of piezoelectric acoustic energy harvester. Applied Mechanics and Materials, 695. pp. 757-760.

Sutikno, Tole and Jidin, Aiman Zakwan and Jidin, Auzani and Nik Idris, Nik Rumzi (2014) Strategies For FPGA Implementation Of Non-Restoring Square Root Algorithm. International Journal of Electrical and Computer Engineering (IJECE), 4 (4). pp. 548-556. ISSN 2088-8708

Syed Hussien, Sharifah Yuslinda and Jaafar, Hazriq Izzuan and Ghazali, Rozaimi and Abdul Razif, Nur Rafiqah (2015) The Effects Of Auto-Tuned Method In Pid And Pd Control Scheme For Gantry Crane System. International Journal of Soft Computing and Engineering (IJSCE), 4. pp. 121-125. ISSN 2231-2307

Syed Najib , Syed Salim and Mohd Fua'ad , Rahmat and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail (2014) Position control of pneumatic actuator using an enhancement of NPID controller based on the characteristic of rate variation nonlinear gain. Position control of pneumatic actuator using an enhancement of NPID controller based on the characteristic of rate variation nonlinear gain, 75 (1-4). pp. 181-195. ISSN 1433-3015

Syed Salim, Syed Najib and Rahmat, Mohd Fua'ad and Mohd Faudzi, Ahmad 'athif and Zool Hilmi, Ismail (2014) Position control of pneumatic actuator using an enhancement of NPID controller based on the characteristic of rate variation nonlinear gain. The International Journal of Advanced Manufacturing Technology, 75 (1-4). pp. 181-195. ISSN 0268-3768

Syed Salim, Syed Najib and Rahmat, Mohd Fua’ad and Abdullah, Lokman and Shamsudin, Shamsul Anuar and Zainon, Maslan and Muhammad Amin, Ahmad Fairuz (2019) Enhanced Self-Regulation Nonlinear PID For Industrial Pneumatic Actuator. International Journal Of Electrical And Computer Engineering (IJECE), 9 (4). pp. 3015-3024. ISSN 2088-8708

T., Joseph Sahaya Anand (2010) Microstructural Analysis of Intermetallic Ni5Al3 Thin Films. Journal of Mechanical Engineering and Technology, 2 (1). pp. 25-39. ISSN 2180-1053

T., Joseph Sahaya Anand and A., H.W. Ngan (2011) NANOSTRUCTURAL STUDIES OF SPUTTER-DEPOSITED NixAl1-x (0.5 ≤ x ≤ 1.0) ALLOY THIN FILMS. Malaysian Journal of Microscopy, 7. pp. 221-227. ISSN 1823 7010

T., Joseph Sahaya Anand and Kok, Yau Chua (2012) XRD ANALYSIS OF Cu-Al INTERCONNECT INTERMETALLIC COMPOUND IN AN ANNEALED MICRO-CHIP. Advanced Materials Research, 620. pp. 166-172. ISSN 1022 - 6680

T., Joseph Sahaya Anand and Mohd , Zaidan and Mohd Abid, Mohd Asyadi Azam and Zolkepli, Buang (2014) Structural Studies of NiTe2 Thin Films with the Influence of Amino-additives. International Journal of Mechanical and Materials Engineering , 9 (18). pp. 1-7. ISSN 1823-0334

T., Joseph Sahaya Anand and S,, Shariza (2011) Effect of Deposition Time on the Structural and Optical Properties of Molybdenum Chalcogenides Thin Films. Chalcogenide Letters, 8 (9). pp. 529-539. ISSN ISSN 1584-8663

T., Joseph Sahaya Anand and S., Shariza (2013) Optical Studies of Transition Metal Chalcogenide MoSe2 Thin Films. Far East Journal of Electronics and Communications, 11 (1). pp. 57-66. ISSN 0973-7006

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli (2012) Electrosynthesized MoS2 Thin Films for Photoelectrochemical (PEC) Cells. Solid State Science and Technology Letters, 19 (1-2). pp. 64-72. ISSN 0128 - 8393

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) MECHANICAL PROPERTIES OF INTERMETALLIC NICKEL ALUMINIDES (Ni3Al). Far East Journal of Electronics and Communications, 11 (1). pp. 47-56. ISSN 0973-7006

T., Joseph Sahaya Anand (2009) Synthesis and Characterization of MoS2 Films for PEC cells. Sains Malaysiana, 38 (1). pp. 85-89. ISSN 0126-6039

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz (2014) Electro synthesised NiTe2 Thin Films with the Influence of Additives. Advanced Materials Research, 925. pp. 159-163. ISSN 1662-8985

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz and S., Shariza (2013) Effect of Additives on Optical Measurements of NiSe2 Thin Films. Procedia Engineering , 53. pp. 555-561. ISSN 1877-7058

T., Joseph Sahaya Anand and Nor Hamizah, Mazlan (2014) Electro synthesized MoTe2 thin films and their semiconductor studies towards photoelectrochemical cell. Advanced Materials Research, 845. pp. 392-397. ISSN 1662-8985

T., Joseph Sahaya Anand and Rajes, KM Rajan and Mohd Zaidan , Abdul Aziz (2013) Electrosynthesized NiS2 thin films and their optical and semiconductor studies. Reports in Electrochemistry, 3. pp. 25-29. ISSN 2230-4096

T., Joseph Sahaya Anand and S., Shariza (2012) A study on molybdenum sulphoselenide (MoSxSe2−x, 0 ≤ x ≤ 2) thin films: Growth from solution and its properties. Electrochimica Acta, 81. pp. 64-73. ISSN 0013-4686

T., Joseph Sahaya Anand and S., Shariza and Z.M., Rosli and Azizah, Shaaban and Sivarao, Subramonian and Mohamad, Radzai Said and S., Thiru (2013) Optical and Mott-Schottky Studies of Ternary MoSSe Thin Films Synthesized by Electrochemical Route. World Applied Sciences Journal, 21. pp. 60-67. ISSN 1818-4952

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2013) Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body. Current Research in Malaysia (CREAM), 2 (2). pp. 61-72. ISSN 2231–8305

Taib, Mohd Hafiz and Miskon, Muhammad Fahmi and Sakidin, Hamzah and Sha’abani, Mohd Nurul Al-Hafiz (2014) Defining The Boundary Of Regions In Thematic Map Using Flexible Ellipse Shape Region. Australian Journal of Basic and Applied Sciences, 8 (9). pp. 171-186. ISSN 1991-8178

Tamaldin, Noreffendy (2010) Experimental study of SCR in a light-duty diesel exhaust to provide data for validation of a CFD model using the porous medium approach. SAE 2010 World Congress & Exhibition, April 2010, Detroit, MI, USA, Session: Diesel Exhaust Emission Control: SCR (Part 3 of 3) (2010-01-1177).

Tan, CheeFai (2013) The Self-Reported Seat Discomfort Survey on Economy Class Aircraft Passenger in the Netherlands. Australian Journal of Basic and Applied Sciences. pp. 563-570. ISSN 1991-8178

Tan, CheeFai (2013) Total Design of Active Neck Support System for Economy Class Aircraft Seat. Applied Mechanics and Materials. pp. 657-660. ISSN 1660-9336

Tan, CheeFai and Ismail, N. (2013) Design of a Feature Recognition System for CAD/CAM Integration. World Applied Sciences Journal, 21 (8). pp. 1162-1166. ISSN 1818-4952

Tan, CheeFai and Ismail, N. and Ranjit, S.S.S. (2013) Feature Recognition System for Rotational Features. Journal of Applied Sciences. ISSN 1812-5654

Tan, CheeFai and Ranjit Singh, Sarban Singh and V.K., Kher and B.T., Tan (2013) Integrated Steering System Design for Bus Driver Drowsy Behavior Change. Applied Mechanics and Materials, 315. pp. 231-235. ISSN 1660-9336

Tan, CheeFai and Tean, Z.Y. and Said, M.R. and Khalil, S.N. and Sudin, M.N. and Karjanto, Juffrizal and Yusof, N.M. and Sivarao, Subramonian (2013) Conceptual design of cantilever support for long haul bus passenger seat. Australian Journal of Basic and Applied Sciences. pp. 383-387. ISSN 1991-8178

Tan, CheeFai and V.K., Kher and S.S., S. Ranjit (2013) An Interactive System for Concurrent Engineering Design. Applied Mechanics and Materials, 313-314. pp. 990-994. ISSN 16609336

Tan, Chee Fai and Alkahari, Mohd Rizal and Said, Md Radzai and Dhar Malingam, Sivakumar and Liew, S. M. and Chen, Wei and Rauterberg, G. W. Matthias and Sarban Singh, Ranjit Singh and Subramonian, Sivarao (2013) Fire fighting mobile robot: state of the art and recent development. Australian Journal of Basic and Applied Sciences, 7 (10). pp. 220-230. ISSN 1991-8178

Tan, Chee Fai and Sarban Singh, Ranjit Singh and Alkahari, Mohd. Rizal (2012) Water Pressure Loss Analysis of Mobile Machine for Fire Fighting Purpose. International Journal of Soft Computing and Engineering (IJSCE), 2 (1). pp. 470-473. ISSN 2231-2307

Tan, Chee Fai and Sarban Singh, Ranjit Singh and Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Khalil, Siti Nurhaida and Dhar Malingam, Sivakumar and E.S. Ng and Chen, Wei and Rauterberg, Matthias and Lim, Danny Thiam Lai (2013) Conceptual design for multi terrain mobile robot. Australian Journal of Basic and Applied Sciences, 7 (12). pp. 300-308. ISSN 1991-8178

Tan, CheeFai (2012) A Fault Diagnosis System for Industry Pipe Manufacturing Process. International Review of Mechanical Engineering (I.RE.M.E.). pp. 1292-1296. ISSN 1970-8734

Tan, CheeFai and Jemal, N. and Shaaban, A. and Said, M.R. and Jong, E.L. (2012) Design of Urea Granulator for Environmental Friendly Urea. International Review of Mechanical Engineering. pp. 1406-1410. ISSN 1970-8734

Tan, CheeFai and Khalil , Siti Nurhaida and Said, Md Radzai (2014) Numerical Modeling of Air-Based Bus Seat. Applied Mechanics and Materials, 663. pp. 610-613. ISSN 1660-9336

Tan, CheeFai and Lim, T.L. (2012) Mechanical Structure Optimization of Sewerage Inspection Robot. International Review of Mechanical Engineering, 6 (7). pp. 1476-1481. ISSN 1970-8734

Tan, CheeFai and Ranjit, S.S.S. (2012) An Expert Carbide Cutting Tools Selection System for CNC Lathe Machine. International Review of Mechanical Engineering, 6 (7). pp. 1402-1405. ISSN 1970-8734

Tan, CheeFai and Ranjit, S.S.S. and Alkahari, M.R. (2012) Water Pressure Loss Analysis of Mobile Machine for Fire Fighting Purpose. International Journal of Soft Computing and Engineering (IJSCE), 2 (1). pp. 470-473. ISSN 2231-2307

Tan, CheeFai and Ranjit Singh, Sarban Singh and V.K. , Kher and H.F. , Kong (2013) Up-Scaling and Optimisation of Fire Fighting Ground Vehicle Track System. Applied Mechanics and Materials, 315. pp. 236-240. ISSN 1660-9336

Tang, Bin and Brennan, Michael John and Vicente, Lopes Jr and Samuel, da Silva and Ramlan, Roszaidi (2016) Using nonlinear jumps to estimate cubic stiffness nonlinearity: An experimental study. Proceedings Of The Institution Of Mechanical Engineers, Part C: Journal Of Mechanical Engineering Science, 230 (19). pp. 3575-3581. ISSN 0022-2542

Taufik, , and Kee, Kuo Zhuan and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2010) Design Optimization on Rotary Draw Tube Bending Parameters using FEA. International Conference on Design and Concurrent Engineering 2010 (iDECON 2010). pp. 213-217. ISSN 983-2948-84-1

Tee, Siau Ping and Md Ghazaly, Mariam and Chong, Shin Horng and Jamaludin, Irma Wani (2017) Rotary Switched Reluctance Actuator: A Review On Design Optimization And Its Control Methods. International Journal Of Power Electronics And Drive System (IJPEDS), 8 (3). pp. 1087-1090. ISSN 2088-8694

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Lim, Boon Huat (2012) Oxidation study on as-bonded intermetallic of copper wire-aluminum bond pad metallization for electronic microchip. Materials Chemistry and Physics, 136 (2-3). pp. 638-647. ISSN 0254-0584

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Yeow, See Leong and Lim, Weng Keat and Hng, May Ting (2013) Microstructural and mechanical analysis of Cu and Au interconnect on various bond pads. Current Applied Physics, 13 (8). pp. 1674-1683. ISSN 1567-1739

Thet, Thet Mon and Junid , Ramli and ABD RAZAK , JEEFFERIE and Sarif, Safian and V.C., Venkatesh (2011) Performance of Cryogenic Machining wih Nitrogen Gas in Machining of Titanium. Applied Mechanics and Materials - Advances in Mechanical Engineering, 52-54. pp. 2003-2008. ISSN 1662-7482

Thoguluva Raghavan, Vijayaram and Sivarao, Subramonian (2008) Surface Finish Investigation on Anchor-Shaped lead castings. Indian Foundry Journal, 54 (6). pp. 27-30. ISSN 0379-5446

Wan Hasrulnizzam , Wan Mahmood and Ab Rahman, Mohd Nizam and Md Deros, Baba and Jusoff, Kamaruzzaman and Adi, Saptari and Zuhriah, Ebrahim and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Jano, Zanariah (2013) Manufacturing Performance in Green Supply Chain Management. World Applied Sciences Journal. pp. 76-84. ISSN 1818-4952

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and A.G., Jaharah (2011) Improving Production Line Performance:A case study. Applied Mechanics and Materials, 44-47. pp. 4136-4140. ISSN 1660-9366

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Ismail, Ahmad Rasdan (2011) Product and Vendor Development Programme in Encouraging Supply Chain Management: A Case Study. Applied Mechanics and Materials, 44-47. pp. 4141-4145. ISSN 1660-9366

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Mazli, Husiah (2011) Maintenance management system for upstream operations in oil and gas industry: a case study. Int. J. Industrial and Systems Engineering, 9 (3). pp. 317-329. ISSN 1748-5037

Wasbari, Faizil and Abu Bakar, Rosli and Gan, Leong Ming and Mohd Tahir, Musthafah and Yusof, Ahmad Anas (2017) A Review Of Compressed-Air Hybrid Technology In Vehicle System. Renewable And Sustainable Energy Reviews, 67. pp. 635-653. ISSN 1364-0321

Wasbari, Faizil and Abu Bakar, Rosli and Gan, Leong Ming and Yusof, Ahmad Anas and Amat Jafar, Zarina (2017) Simulation Of Storage Performance On Hydro-Pneumatic Driveline In Dual Hybrid Hydraulic Passenger Car. MATEC Web Of Conferences, 90. pp. 1-13. ISSN 2261-236X

Widodo, W. Sapto and Wong, C.Y and Kamarul, A.M and Hidayah, Nurul A. (2011) CFD Simulation for Tray Dryer Optimization. Journal of Advanced Manufacturing Technology, Vol. 5 (No. 2). pp. 1-10. ISSN 1985-3157

Wong , Kian Loon and Mohd Najib , Ali Mokhtar and Jafar, Fairul Azni (2014) Vertical Axis Wind Turbine With Magnetic Levitation Principle. Applied Mechanics and Materials, 255 (259). pp. 255-259. ISSN 1660-9336

Y., Mohd Yuhazri and A.R., Jeefferie and I.P, Haeryip Sihombing and O., Nooririnah and A.R, Warikh (2011) Coating Effect Condition on the Corrosion Properties of Mild Steel Substrate. International Journal of Applied Science and Technology, 1 (1). pp. 45-49. ISSN 2221-0997

YAAKOB, MOHD YUHAZRI and IP, HAERYIP SIHOMBING and A.R, JEEFFERIE and A.Z, AHMAD MUJAHID and A.G, BALAMURUGAN and M.N, NORAZMAN and A., SHOHAIMI (2011) Optimization of Coconut Fibers Toward Heat Insulator Applications. GLOBAL ENGINEERS & TECHNOLOGISTS REVIEW, 1 (1). pp. 35-40. ISSN 2231-9700

YUSOF, AHMAD ANAS and WAN ALI, WAN KHAIRUDDIN and ABD RAHMAN, THAREK and ANI, FARID NASIR (2012) Microwave and Reflection Properties of Palm Shell Carbon-Polyester Conductive Composite Absorber. MICROWAVE AND REFLECTION PROPERTIES OF PALM SHELL CARBON-POLYESTER CONDUCTIVE COMPOSITE ABSORBER, 42 (1). pp. 59-74. ISSN 0127-9696

Yaakob, Mohd Yuhazri and A.R, Jeefferie and I.P, Haeryip Sihombing and S., Siti Rahmah (2011) Effect of Parameter Controlled in Tin Coating on the Mild Steel Substrate. International Journal of Engineering Science and Technology, 3 (3). pp. 2113-2117. ISSN 0975-5462

Yaakub , Juliana and Mohamad, Noraiham and ABD RAZAK , JEEFFERIE and Jano, Zanariah and Shueb, Mohamad Iqbal (2014) Cure Characteristic, Tensile and Morphological Properties of Graphene Nanoplatelets (GNPs) Filled NR/EPDM Composites. American-Eurasian Journal of Sustainable Agriculture, 2014 Special (8) (4). pp. 148-155. ISSN 1995-0748 (In Press)

Yahaya, Saifudin Hafiz and Sihombing, Haeryip and Yaakob, Mohd Yuhazri (2013) G2 Bézier-Like Cubic as the S-Transition and C-Spiral Curves and Its Application in Designing a Spur Gear Tooth. Australian Journal of Basic and Applied Sciences. pp. 109-122. ISSN 1991-8178

Yahaya, S.H and Ali, J.M and Abdullah, T.A. (2011) Parametric transition as a spiral curve and its application in spur gear tooth with FEA. International Journal of Electrical and Computer Engineering, 5 (1). pp. 64-70. ISSN 2010-3948

Yahaya, S.H. and Ali, J.M and Arham, M.R (2011) The Analysis of Duct Model Through Structural and Dynamic Schemes. International Journal of Engineering and Applied Sciences, 7 (2). pp. 121-124. ISSN 2010-3980

Yahya , Abu Bakar and Wan Daud, Wan Mohd Bukhari and Chong , Shin Horng and Sudirman , Rubita (2014) Electromyography Signal On Biceps Muscle In Time Domain Analysis. Journal of Mechanical Engineering and Sciences (JMES), 7. pp. 1179-1188. ISSN 2289-4659

Yamaguchi, Masayuki and Yokohara , Tadashi and Md Ali , Mohd Amran (2013) Effect of flexible fibers on rheological properties of poly(Lactic Acid) composites under elongational flow. Journa of the Society of Rheology Japan. pp. 129-135. ISSN 0387-1533

Yuhazri, M.Y. and Jennise, T.T.T. and Sihombing, H. and M. Radzai , Said and Nirmal, U. and Megat Ahmad, M.M.H. (2013) Tensile Properties of Angle Cured Laminated Composites Structures under Gravity Effects. Applied Mechanics and Materials, 465-46. pp. 101-105. ISSN 1662-7482

Yuniawan, Dani and Teruaki, Ito and Mohamad, Effendi (2013) Calculation of overall equipment effectiveness weight by Taguchi method with simulation. CONCURRENT ENGINEERING: Research and Applications, 21 (4). pp. 296-306. ISSN 1063-293X

Yusof, Ahmad Anas and Wasbari, Faizil and Mohamad Shukri , Zakaria and Ibrahim, Mohd Qadafie (2013) Slip Flow Coefficient Analysis in Water Hydraulics Gear Pump For Environmental Friendly Application. IOP Conf. Series: Materials Science and Engineering, 50. pp. 1-8. ISSN 1757-899X

Yusof, Ahmad Anas and Misha, Suhaimi and Md Isa, Mohamed Hafiz and Wasbari, Faizil and Ibrahim, Mohd Qadafie and Kasim, Mohd Shahir (2018) Simulation And Experimentation Of Water Hydraulics Technology For Automatic Traditional Cookies Production. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 47 (1). pp. 136-150. ISSN 2289-7879

Yusof, Ahmad Anas and Wasbari, Faizil and Ibrahim, Mohd Qadafie (2013) Research Development of Energy Efficient Water Hydraulics Manipulator for Underwater Application. Applied Mechanics and Materials, 393. pp. 723-728. ISSN 1660-9336

Yusof, Ahmad Anas and Zaili , Zarin Syukri and Mohd Nor, Nur Fathiah and Mohd Hanafi, Mohd Hafidzal (2015) Characteristics of a reciprocating pump for low-cost sustainable water hydraulic technology demonstrator. Applied Mechanics and Materials, 699. 736-741 . ISSN 1662-7482

Yusuf, NA and Afandi, NF and Salim, MA and Misran, H and Omar, Nooririnah (2014) Mechanical and wear properties of aluminum coating prepared by cold spraying. Malaysian Journal of Microscopy, 10. pp. 118-124. ISSN 1823 7010

Yusuf, Y. and Juoi, J. M. and Rosli, Z. M. and Kwan , W. L. and Mahamud, Z. (2013) Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy. Pertanika Journal of SCience and Technology, 21 (1). pp. 45-58. ISSN 0128-7680

Zainal Abidin, M.I. and Mahmud, J. and Abd Latif, M.J. and Jumahat, A. (2013) Experimental and Numerical Investigation of SUP12 Steel Coil Spring. Procedia Engineering . pp. 251-257. ISSN 1877-7058

Zainal Abidin, Muhammad Zaimi and Azran, M.N and Khaizaki, M. and Alif, M. and Abdul Aziz, Mohd Sanusi and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition in Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795

Zainordin, Ahmad Zaifazlin and ABDULLAH, Mohd Azman and Hudha, Khisbullah (2013) Experimental Evaluations on Braking Responses of Magnetorheological Brake. International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME). pp. 195-199. ISSN 2320-4052

Zakaria, Kamarul Ariffin (2013) Elevated Temperature Fatigue Life Investigation of Aluminium Alloy based on the Predicted S-N Curve. Jurnal Teknologi, UTM. pp. 75-79. ISSN 0127-9696

Zakaria, Kamarul Ariffin (2014) Fatigue strain signal behaviour and damage assessment of an engine mount bracket. Journal of scientific & Industrial Research . pp. 112-6. ISSN 0975-1084

Zakaria, Kamarul Ariffin (2013) Comparative study of fatigue life behaviour of AA6061 and AA7075 alloys under spectrum loadings. Materials and Design, 49. pp. 48-57. ISSN 0261-3069

Zakaria, Kamarul Ariffin (2012) Elevated Temperature Fatigue Fracture Behaviour of Aluminium Alloy Subjected to Spectrum Loadings. Applied Mechanics and Materials, 165. pp. 219-223. ISSN ISSN 1660-9336

Zakaria, Kamarul Ariffin (2012) FRACTOGRAPHY ANALYSIS OF Al6061 UNDER FATIGUE SPECTRUM LOADINGS. Engineering e-Transaction, 7 (1). pp. 28-33. ISSN ISSN 1823-6379

Zakaria, Kamarul Ariffin (2011) Fatigue Damage Assessment of the Engine Mount Bracket Using a Statistical Based Approach. Advanced Materials Research, 197-19. pp. 1631-1635. ISSN ISSN 1022-6680

Zakaria, Kamarul Ariffin (2013) Influence of spectrum loading sequences on fatigue life in a high-temperature environment. Engineering Failure Analysis, 30. pp. 111-123. ISSN 0025-5300

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah (2011) The Study on Fatigue Crack Propagation in Metal Using Finite Element Analysis. Key Engineering Materials, 462-46. pp. 657-662. ISSN ISSN 1013-9826

Zakaria, Nazri Huzaimi and Mohamad Zin, Mohd Rody and Abdollah, Mohd Fadzli bin and Saleman, Abdul Rafeq and Amiruddin, Hilmi and tamaldin, noreffendy (2013) Elastohydrodynamics Lubrication for Bio-Based Lubricants in Elliptical Conjunction. Procedia Engineering , 68. pp. 123-129. ISSN 1877-7058

Zulkafli, Nur Izyan and Kopanos, Georgios M. (2018) A General Optimization Framework For The Design And Planning Of Energy Supply Chain Networks: Techno-Economic And Environmental Analysis. Chemical Engineering Research and Design, 131. pp. 214-233. ISSN 0263-8762

Zulkapli, Nor Najihah and Abd Manaf, Mohd Edeerozey and Ab Maulod, Hairul Effendy and Abdul Manaf, Nor Syafira and Raja Seman, Raja Noor Amalina and Bistamam, Mohd Shahril Amin and Talib, Elyas and Mohd Abid, Mohd Asyadi Azam (2015) Control of cobalt catalyst thin film thickness by varying spin speed in spin coating towards carbon nanotube growth. Applied Mechanics and Materials, 761. pp. 421-425. ISSN 1662-7482

Zulkifilie , Ibrahim (2016) Harmonic Reduction Comparison In Multilevel Inverters For Industrial Application. Journal Of Theoretical And Applied Information Technology, 63. p. 570. ISSN 1992-8645

hambali, A and Farid, Z.A and Najib, M (2010) Development of a new pump through modifying a conventional automotive spark plug. Journal of Scientific & Industrial Research (JSIR), 69. pp. 365-367. ISSN 0975-1084 (Online); 0022-4456 (Print)

tamaldin, noreffendy and Dzulkifli, Mohd Amin (2012) INVESTIGATION OF ENGINE PERFORMANCE AND EMISSION LEVEL OF SI ENGINE RUNNING WITH DIFFERENT RON FUEL GRADES. 3rd International Conference on Engineering and ICT (ICEI2012) Melaka, Malaysia 4 – 6 April 2012. na-na. ISSN none

tamaldin, noreffendy and Mat Yamin, Ahmad Kamal and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and ABDULLAH, Mohd Azman (2013) Design Optimization of Thermal Management System for Electric Vehicle Utilizing CFD Analysis, DFMEA and CES. Procedia Engineering , 68. pp. 305-312. ISSN 1877-7058

Book Chapter

Liaw, Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2015) Stirling Engine Technology For Parabolic Dish-Stirling System Based On Concentrating Solar Power (CSP). In: Applied Mechanics And Materials. Trans Tech Publications, Switzerland, pp. 576-580. ISBN -

Mansor, Muhd Ridzuan and Sapuan, S.M (2014) Materials Selection for Lightweight Automotive Composite Hand Operated Parking Brake Lever Design with a Weighted Property Index Method. In: Engineering Composites: Properties and Applications. UPM Press, Serdang, pp. 248-264. ISBN 978-967-344-396-3

Md Ali, Mohd Amran and Raja, Izamshah and Abu Bakar, Mohd Hadzley and Sivarao, Subramonian and Hussein, Nur Izan Syahriah (2012) Mechanical Properties of Polypropylene Composites Containing Polymer Fibers. In: International Conference on Design and Concurrent Engineering, iDECON2012. Universiti Teknikal Malaysia Melaka, pp. 239-242. ISBN 978-967-0257-16-7

Minhat, Mohamad and Xu, Xun (2008) Characteristics and Technologies of Advanced CNC Systems. In: Encyclopedia of Information Science and Technology. IGI Global, Hershey, PA 17033-1240, USA, pp. 519-526.

Misha, Suhaimi and Mat, Sohif and Mohd Rosli, Mohd Afzanizam and Ruslan, Mohd Hafidz and Sopian, Kamaruzzaman and Salleh, Elias @ Ilias (2015) Simulation of air flow distribution in a tray dryer by CFD. In: Recent Advances in Renewable Energy Sources. WSEAS Press, pp. 29-34. ISBN 978-1-61804-303-0

Misha, Suhaimi and Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Ruslan, Mohd Hafidz and Salleh, Elias @ Ilias and Sopian, Kamaruzzaman (2014) Performance test of solar assisted solid desiccant dryer. In: Computer Applications in Environmental Sciences and Renewable Energy. WSEAS Press, pp. 174-180. ISBN 9789604743704

Nurfaizey , Abdul Hamid and Tucker, Nick and Stanger, Jonathan and Staiger, Mark (2012) Functional nanofibers in clothing for protection against chemical and biological hazards. In: Functional nanofibers and their applications. Woodhead Publishing, pp. 236-261. ISBN 978-0-85709-069-0

Suhaimi, Misha (2013) Comparison of CFD Simulation on Tray Dryer System Between Porous and Solid Product. In: Latest Trends in Renewable Energy & Environmental Informatics. WSEAS Press, pp. 59-64. ISBN 978-1-61804-175-3

Conference or Workshop Item

A, Hambali and M.S, Izzati and A.A, Tajul and A.R, soufhwee and Roni Sahroni, Taufik (2012) Application of Analytical Hierarchy Process (AHP) in Material Selection Process for Automotive Bumper Fascia. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

A, hambali and L.I, Intan and A.A, Tajul and A.R, Soufhwee and Roni Sahroni, Taufik (2012) Selection of Manufacturing Process for Automotive Bumper Fascia Using Analytical Hierarchy Process. In: International Conference on Design and Concurrent Engineering 2012, October 15–16, 2012, Equatorial Hotel, Melaka.

ABDUL HALIM, RAHIMAH and YAAKOB, MOHD YUHAZRI and HASOLOAN, HAERY IAN PIETER (2012) Design and Analysis of a New Natural Illumination Device through Lumen Method Approach. In: 3rd International Conference on Mechanical and Manufacturing Engineering , 20-21 NOVEMBER 2012, UTHM.

ABDULLAH, Mohd Azman and Shaharuzaman, M.A and Jenal, Rustamreen and Boejang, Hambali and Mat Idera , I.H. and Mohd Razi, M.Z. (2012) Development of Conceptual Vehicle All-Wheel-Nuts Remover. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

AKIAH, MASNI AZIAN and HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) Tensile Properties Evaluation of Paper Pulp Packaging at Different Sections and Orientations on the Egg Tray. In: International Conference on Advanced Material Engineering and Technology, 28-30 NOVEMBER 2012, penang.

Ab Azis, Fadilah and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Othman, Muhammad Nur and Khamis, K.S. and Ghani, O.A.A. (2014) Modelling and Analysis of All Terrain Vehicle (ATV) using System Identification for Yaw Stability. In: International Conference on Design and Concurrent Engineeting (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.

Ab Maulod, Hairul Effendy and Yaakub, Juliana and Yaakob, Mohd Yuhazri and Samsudin, Abdul Rahim and Mohamad, Noraiham (2012) Preliminary study of CFRP manufacturing offcuts with secondary resin impregnation via hand lay up. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka. (Submitted)

Ab Razak, Juhari and MUSA@OTHMAN, MASJURI and Ayob, Md Razali and Hassan, Muhammad Zahir and Abd. Rahman, Md. Nizam and Sopian, Kamaruzzaman (2010) Pico Hydro Application for Off-Grid Settlement. In: World Renewable Energy Congress XI, 25-30 September 2010, Abu Dhabi, UAE.

Abbas, Adnan Jameel and Minhat, Mohamad and Abdul Rahman, Md. Nizam Bin and Akbar, Habibullah (2012) Future prospects of turning processes optimization using metaheuristics methods. In: International Conference on Uncertainty Reasoning and Knowledge Engineering ICURKE 2012, 14-15 Aug. 2012, Jakarta, Indonesia.

Abd Manap, Nurulfajar and Md Salim, Sani Irwan and Haron, Nor Zaidi (2006) Design & Development of a Robotic System Using LEGO Mindstorm. In: Seminar Pencapaian Penyelidikan KUTKM 2006, 2006, KUTKM, Melaka.

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) Drive to Greener Future: Tribological and Engine Performances of Nano-Oil. In: JAST Tribology Conference, Spring 2014, 19 - 21 May 2014, Tokyo.

Abdollah, Mohd Fadzli bin and Abdullah, Muhammad Ilman Hakimi Chua and Amiruddin, Hilmi and tamaldin, noreffendy and Mat Nuri, Nur Rashid (2014) The hBN Nanoparticles as an Effective Additive in Engine Oil to Enhance the Durability and Performance of a Small Diesel Engine. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.

Abdollah, Mohd Fadzli bin and Yamaguchi, Y. and Akao, T. and Inayoshi, N. and Miyamoto , N. and Tokoroyama, Takayuki and Umehara, Noritsugu (2011) Deformation and wear map of DLC coating under cyclic impacts. In: International Tribology Conference 2011, 30 October 2011 - 3 November 2011, Hiroshima.

Abdollah, Mohd Fadzli bin and Yamaguchi, Y. and Akao, T. and Inayoshi, N. and Umehara, Noritsugu and Tokoroyama, Takayuki (2010) Raman Spectroscopy Study of Impacted DLC Coatings. In: Interatioal Tribology Congress - ASIATRIB 2010, 5-9 December 2010, Perth, Australia.

Abdollah, Mohd Fadzli bin and tamaldin, noreffendy and Amiruddin, Hilmi and Mohd Zamberi, Mahanum and Rody, M. Z. M and Mat Kamal, Sushella Edayu (2012) Tribology-Related Researches at Faculty of Mechanical Engineering, Universiti Teknikal Malaysia Melaka (UTeM). In: Malaysia-Japan Tribology Meeting 2012, 27-28 August 2012, Kuala Lumpur.

Abdollah, Mohd Fadzli bin and Yamaguchi, Yuto and Akao, T. and Inayoshi, N. and Tokoroyama, Takayuki and Umehara, Noritsugu (2010) The effect of maximum normal impact load, absorbed energy and contact impulse on the impact craters volume/depth of DLC coating under repetitive impacts. In: JAST Tribology Conference 2010, 14-17 September 2010, Fukui, Japan.

Abdul Hamid, Rahimah and Ito, Teruaki (2017) B-code Generation for a CNC Dentistry Wire Bending Mechanism. In: International Symposium on Scheduling, 23-25 June 2017, Nanzan University, Nagoya, Japan.

Abdul Munir, Fudhail and Mat Nuri @ Md Din, Nur Rashid and Mohd Azmi, Mohd Irwan and Salim, Mohd Azli and Hasnan, Mohd Yazid (2011) Preliminary Studies of Air flow around Vehicle Front Windscreen. In: THE 4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), 3 - 4 OKTOBER 2011, MELAKA, MALAYSIA.

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Mat Nuri, Nur Rashid (2013) Optimized Nanolubricant for Friction Reduction. In: 40th Leeds-Lyon Symposium on Tribology & Tribochemistry Forum 2013, 4 - 6 September 2013, Lyon, France.

Abdullah, Adli Zil Ikram and Abdollah, Mohd Fadzli bin and Tee, Boon Tuan and Amiruddin, Hilmi and Mat Yamin, Ahmad Kamal and Tamaldin, Noreffendy (2015) Thermal performance of carbon-based microencapsulated phase change materials. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.

Abdullah, Yasseer and Putra, Azma and Efendy, Hady and Wan Mohamad, Wan Mohd Farid and Ayob, Md Razali (2012) The effect of binder on the acoustical performance of the paddy straw ‘green’ sound absorber. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Ahmad, NurulHuda and Kamat, Seri Rahayu and Minhat, Mohamad and Bani Hashim, Ahmad Yusairi and Isa, Halim (2014) Modeling an ergonomic driving for in-car interaction: A propose framework. In: International Conference on Industrial Engineering and Operations Management (IEOM2014), January 7 – 9, 2014, Bali, Indonesia.

Alimin, Ahmad Jais and Tamaldin, Noreffendy and Mamat, Rizalman (2011) Strategic Research Partnership on Automotive Powertrain & Fuels in Universiti Malaysia Pahang, Universiti Teknikal Malaysia Melaka & Universiti Tun Hussein Onn Malaysia. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Idris, A.M. and Abdullah, Muhammad Ilman Hakimi Chua and tamaldin, Noreffendy (2015) Stability of nano-oil by pH control in stationary conditions. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.

Amiruddin, Hilmi and Abdollah, Mohd Fadzli bin and Mazlan, Mohd Afiq Azfar and tamaldin, noreffendy (2014) Effect of Lubrication Environments on Wear Performance of Ball Bearing Materials. In: Proceedings of 41th Leeds-Lyon Symposium on Tribology 2014, 2-5 September 2014, Leeds, United Kingdom.

Aparow, Vimal Rau and Hassan, Muhammad Zahir and Hudha, Khisbullah and Ahmad, Fauzi (2012) SENSORS CONFIGURATION FOR SMALL SCALE AUTONOMOUS GROUND VEHICLE. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Arshad, Nurul Hidayah and Arep @ Ariff, Hambali and Samsudin, Abdul Rahim and Minhat, Mohamad (2011) Application of Integrated Kano’s Method and Quality Deployment Function in New Product Development Process. In: International Conference on Advanced Manufacturing 2011 , May 23 – 24, 2011, TATi University College, , Terengganu.

Ashafi'e, Mustafa and Abdollah, Mohd Fadzli bin and Ismail, Nurhidayah and Amiruddin, Hilmi and Umehara, Noritsugu (2014) Pre-Materials Selection for Eco-Aware Lightweight Friction Material. In: 9th International Materials Technology Conference and Exhibition, 13 - 16 May 2014, Kuala Lumpur.

Asmai, Siti Azirah and Hasan Basari, Abd Samad and Shibghatullah, Abdul Samad and Ibrahim, Nuzulha Khilwani and Hussin, Burairah (2011) Neural network prognostics model for industrial equipment maintenance. In: 11th International Conference on Hybrid Intelligent Systems, HIS 2011 , 5-8 December 2011, Melaka. (Submitted)

Asriana, Ibrahim (2013) A STUDY OF VEGETABLE OILS AS A HELICAL GEAR LUBRICANT. In: Seminar Kebangsaan Aplikasi Sains dan Matematik (SKASM), 29-30 Oktober 2013, Perpustakaan Tunku Tun Aminah, UTHM Johor. (Submitted)

Ayob, Md Razali and Mat, Shafizal and Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2011) Study on Performance of Single Cylinder Engine Fueled by LPG. In: International Conference on Mechanical, Automotive, and Aerospace Engineering 2011, 17 - 19 May 2011, Kuala Lumpur.

Azahar, Arman Hadi and Chong, Shin Horng and Mohamed Kassim, Anuar (2015) Hopping peak height algorithm for a one legged robot hopping height control. In: Mechanical Engineering Research Day 2015, 31 March 2015, Melaka.

Azahar, Arman Hadi and Chong, Shin Horng and Mohammed Kassim, Anuar (2013) Vertical motion control of a one legged hopping robot by using central pattern generator (CPG). In: IEEE Symposium on Industrial Electronics and Applications, September 22-25, 2013, Kuching, Malaysia.

Azmi, M.N and Rafeq, Saleman Abdul and Nadlene, Razali and Irwan, M.A.M and Aishah, A.M. (2013) TENSILE AND HARDNESS PROPERTIES OF KENAF-PP/PLA COMPOSITE FILLED NANOCLAY. In: International Conference on Engineering and ICT (ICEI2012), 4 - 5 APRIL 2012, BANDA HILIR, MELAKA.

Bahar, Mohd Bazli and Md Sani, Zamani (2011) Development of rubber tire gantry crane (prototype) obstacles avoidance method using a single sensor on microcontroller based. In: IEEE Symposium On Industrial Electronics and Applications (ISIEA2011) , 25-28 September 2011, Langkawi, Kedah. (Submitted)

Che Amran, Aliza and Fen, Ying Chin and Md Ghazaly, Mariam and Chong, Shin Horng (2014) Development of Passive Quarter Car Suspension Prototype. In: International Conference on Design and Concurrent Engineeting (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.

Chong, Shin Horng (2012) AR-CM NCTF Control for Precision Positioning Systems - Concept and Results. In: SIXTH ASIA MODELING SYMPOSIUM , MAY 29-31, 2012, BALI, INDONESIA.

Chong, Shin Horng and Hee, Wai Keat and Sato, Kaiji (2014) Positioning control of an X-Y table based on practical NCTF control. In: The 12th International Conference on Motion and Vibration (MoViC), 3-7, August 2014, Sapporo, Hokaiddo, Japan.

Chong, Shin Horng and Sato, Kaiji (2009) A New Design Approach of Practical Controller for Precision Positioning Systems – Concept and Application to Non-Friction Mechanism. In: Asian Society of Precision Engineering & Nanotechnology Conference (ASPEN), Sept 2009, KITAKYUSHU JAPAN .

Chong, Shin Horng and Sato, Kaiji (2008) Practical Control of Non-Friction Mechanism for Precision Positioning. In: International Conference of Control, Automation & Systems, October 2008, COEX SEOUL KOREA.

Chong, Shin Horng and Sato, Kaiji (2008) A Practical Controller Design for High Precision Motion System with Non-Friction Mechanism. In: International Conference of Positioning Technology Conference (ICPT), November 2008, HAMMAMATSU JAPAN .

Chong, Shin Horng and Sato, Kaiji (2011) Practical and robust control for precision positioning systems. In: 2011 IEEE International Conference on Mechatronics (ICM), April 2011, Istanbul.

Chong, Shin Horng and Sato, Kaiji (2009) Practical common design procedure of precision positioning controller for non-contact and contact mechanism. In: JSME-IIS/ASME-ISPS Micromechatronics for Information and Precision Equipment Joint Conference (MIPE), June 2009, IBARAKI JAPAN .

Chong, Shin Horng and Sato, Kaiji (2010) Practical controller for precision positioning system - A new design approach and application to mechanism with friction. In: American Society of Precision Engineering Meetings 2010, April 2010, MIT Cambridge USA.

Chong, Shin Horng and Subari, Hanafi and Hee, Wai Keat and Chong, Wen Yee and Md Nawawi, Mohamad Riduwan and Othman, Md Nazri (2015) Investigation of model parameter variation for tension control of a multi motor wire winding system. In: The 10th Asian Control Conference (ASCC), May 31 - June 3, 2015, Kota Kinabalu, Sabah, Malaysia.

Daud, Mohd Elias and Yusof, Yusri and Minhat, Mohamad (2011) A framework for a development of an intelligent CNC controller based ON step-NC. In: International Conference on Manufacturing Science and Technology ICMST 2011, 16 - 18 September 2011, Singapore.

Daud, Mohd Elias and Yusof, Yusri and Minhat, Mohamad (2011) A review of intelligent CNC controller development based on step-NC. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Din, Abdul Talib and Azraai, Shamsul Bahari and Thenamirtham, Kesavan Selvan (2012) Design and Development of A Vertical Wind Turbine Using Slow Wind Speed for Mini Power Generation. In: E-Leader Conference, Manila, 2nd January 2012, Global Innovative College, Global City, Manila.

Din, Abdul Talib and Rahimi, Roslina Aida (2010) A numerical analysis on double acting pneumatic telescopic cylinder motion characteristics. In: 2010 International Conference on Mechanical and Aerospace Engineering, 16th till 18 April 2010, Chengdu China.

Fadhilah, S.A and Rafeq, Saleman Abdul and Hairul, B. and Nur Hazwani, Mokhtar and Nona Merry, M. Mitan (2012) NANOFLUID AS COOLANT IN AUTOMOTIVE COOLING SYSTEM–HEAT TRANSFER CHARACTERISTICS OF CAR RADIATOR USING CU-BASED NANOFLUID. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Fatihah Ros , Ahmad and Seri Rahayu , Kamat and Ahmad Yusairi, Bani Hashim (2014) Fatigue on upper quadrant human body: the psychophysical experience among drivers. In: International Con Current Design and Engineering (iDECON 2014), 20 and 21 Sepetmebr 2014, Melaka.

Fudhail Abdul Munir, F.A. Munir and Mohd Adrinata, Shaharuzaman and Muhammad Zahir , Hassan and Mohd Rody , Mohamad Zin and Mohd Irwan, Mohd Azmi and Nur Rashid , Mat Nuri (2011) Components Design of a Single Seat Educational Race Vehicle. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Ganesh , Kumar and Sivarao, Subramonian and T., Joseph Sahaya Anand (2010) Intermetallic Nickel Aluminides as alternating Automotive Body Materials. In: National Conference on Advanced Manufacturing & Material Engineering 2010, 25th to 26th May 2010, Universiti Tun Hussein Onn Malaysia, Johor.

HARUN, Mohd Hanif and W Abdullah, W. M. Zailimi and ABDULLAH, Mohd Azman and JAMALUDDIN, Hishamuddin and ABD RAHMAN, Roslan and HUDHA, Khisbullah (2013) The Analysis of Railway Vehicle with Semi-Active Secondary Suspension System under Harmonic Excitation Disturbance. In: Annual Conference on Engineering and Information Technology 2014, 28-30 June 2013, Seoul, Korea.

Hambali , Arep and Tajul Ariffin, Abdullah and Nurul Hidayah , Arshad (2012) Development of conceptual design of car housing side mirror using intergrated approach. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia . (Submitted)

Hasan, Nor Halim and Said, Md Radzai and Leman, Abdul Mutalib and D.Pagukuman, B. Norerama and Othman, Jaafar (2012) Data comparison on fumes local exhaust ventilation: Examination and testing compliance to USECHH regulation 2000. In: Scientific Conference on Occupational Safety & Health, 12-13 Dec. 2012, NOSH Bandar Baru Bangi.

Hasan, Nor Halim and Said, M. R and Leman, A. M (2012) Local Exhaust Ventilation: PAST, PRESENT, and FUTURE. In: 15th Conference and Exibition on Occupational Safety & Health, 2-4 Sept 2012, Sunway Pyramid Convention Centre, Selangor.

Hassan, Muhammad Zahir (2005) Brake Squeal Noise: Finite Element Analysis. In: The AEESEAP International Conference 2005, 7-8 June 2005, Kuala Lumpur Malaysia.

Hassan, Muhammad Zahir (2005) Experimental Modal Analysis of Brake Squeal Noise. In: The AEESEAP International Conference 2005, 7-8 June 2005, Kuala Lumpur Malaysia.

Hassan, Muhammad Zahir (2007) Thermal Deformation Analysis of Automotive Disc Brake Squeal. In: PGR Conference 2007 University of Leeds , September, University of Leeds, United Kingdom. (Submitted)

Hassan, Muhammad Zahir and Abdul Munir, Fudhail and Mohamad Zin, Mohd Rody and Mohd Irwan, Mohd Azmi (2012) THERMAL ANALYSIS OF A OF BRAKE DISC ROTOR FOR PERSONAL ELECTRIC VEHICLE. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Herawan, Safarudin Gazali (2003) Carbon molecular sieves from oil palm shell for separation of methane from carbon dioxide gas mixture. In: Engineering and Technology Conference 2003 (EnTech 2003), 30 July - 1 August 2003, Kucing, Serawak.

Herawan, Safarudin Gazali (2000) MICROPOROUS CARBON ADSORBENTS FROM OIL PALM SHELLS FOR GAS SEPARATION. In: ”. The 3rd Asia Pacific Conference on Sustainable Energy and Environment Technologies, 3 - 6 December 2000, Hongkong.

Herawan, Safarudin Gazali (2000) PROCESSING MICROPOROUS CARBON ADSORBENTS BY PHYSICAL AND CHEMICAL TREATMENTS FOR GAS SEPARATION. In: SOMCHE 2000, 30 - 31 October 2000, Kuala Lumpur.

Herawan, Safarudin Gazali (2000) REMOVAL OF CARBON DIOXIDE BY MICROPOROUS CARBON ADSORBENTS FROM OIL PALM SHELLS. In: AMER 2000, 4 - 5 October 2000, Shah Alam.

Herawan, Safarudin Gazali (2003) THERMOGRAVIMETRY ANALYSIS FOR DETERMINING THE ADSORPTION SELECTIVITY OF CARBON MOLECULAR SIEVE FROM OIL PALM SHELL. In: The 3rd International Conference on Advances in Strategic Technologies, 12 - 14 August 2003, Kuala Lumpur.

Herawan, Safarudin Gazali (2003) UTILIZATION OF OIL PALM SHELL BY CONVERTED TO CARBON MOLECULAR SIEVE FOR SEPARATION OF METHANE FROM CARBON DIOXIDE AS A WASTE MINIMIZATION. In: Environment 2003, 18 - 19 February 2003, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Ab Razak, Juhari and Yusof, Ahmad Anas and Suhaimi, Misha (2005) Developing Thermodynamics Teaching Method by Using Computer Based Problems Solving With Interactive Thermodynamics Property Tables and Equations. In: Enhancing Research for Excellence: A Seminar for Research Achievement of KUTKM, 9 - 11 September 2005, Kuantan, Pahang.

Herawan, Safarudin Gazali and Ab Razak, Juhari and Yusof, Ahmad Anas and Suhaimi, Misha (2004) Developing Thermodynamics Teaching Method by Using Computer Based Problems Solving With Interactive Thermodynamics Property Tables and Equations. In: Conference on Engineering Education, 14 - 15 December 2004, Kuala Lumpur.

Herawan, Safarudin Gazali and Abdul Hakim, Rohhaizan and Ahmad Faris, Ismail and Mohammed, Ataur Rahman (2013) POWER PREDICTED FROM WASTE HEAT RECOVERY EXHAUST OF NATURAL ASPIRATED ENGINE. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2013, 2 - 4 July 2013, Kuala Lumpur, Malaysia. (Submitted)

Herawan, Safarudin Gazali and Abdul Hakim , Rohhaian and Ahmad Faris , Ismail (2012) WASTE HEAT RECOVERY FROM THE EXHAUST OF NATURAL ASPIRATED ENGINE. In: The 3rd International Conference on Engineering and ICT (ICEI 2012), 4 - 5 APRIL 2012, MELAKA, MALAYSIA.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Characteristic of Different Precursor Size of Activated Carbon Produced From Oil Palm Shell in Adsorption of LPG. In: International Conference on Applications and Design in Mechanical Engineering (ICADME), 11 - 13 October 2009, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2012) EXPERIMENTALLY INVESTIGATION THE PERFORMANCE OF TURBO-GENERATOR IN GASOLINE VEHICLE. In: The 3rd International Conference on Engineering and ICT (ICEI 2012), 4 - 5 April 2012, Melaka, Malaysia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Effect of different carbonization of activated carbon produced from oil palm shell in adsorption of Liquefied Petroleum Gas (LPG). In: International Conference of Sustainable Energy (ICSE 2009), 16 - 17 June 2009, Bandung, Indonesia.

Herawan, Safarudin Gazali and Ayob, Md Razali (2009) Effect of pyrolysis temperature on pore development of oil palm-shell activated carbons. In: International Conference and Exhibition on Science and Technology in Biomass Production (ICEBP) 2009, 25 - 26 November 2009, Bandung, Indonesia.

Herawan, Safarudin Gazali and M. Syamsul, Hadi and Shahrin, Omar and Nor Effyza, Roslan (2010) Low Power Split Unit Air Conditioning using Thermal Energy Storage (TES) System. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18 - 20 February 2010, Melaka, Malaysia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas (2005) THE EFFECT OF ACTIVATION IN CARBON ADSORBENT ON ADSORPTION AND DESORPTION PROCESSES OF LPG GAS. In: National Conference on Advances in Mechanical Engineering 2005 (NAME’05), 18 - 20 May 2005, Kuala Lumpur.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2003) CARBON ADSORBENT PREPARED FROM WASTE MATERIALS FOR LPG GAS STORAGE MEDIA. In: Symposium of the Malaysian Chemical Engineers (SOMChe2003) , 29 - 30 December 2003, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2003) Carbon Adsorbent from Waste Materials (Coconut Shell, Oil Palm Shell, Plastic Bag) for Hydrocarbon Gas Storage. In: Conference in conjunction with IPTA Research and Development Exposition 2003, 2 - 5 October 2003, Kuala Lumpur.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2005) Preparation of Carbon Adsorbent by Utilizing Waste Materials for LPG Gas Storage. In: Enhancing Research for Excellence: A Seminar for Research Achievement of KUTKM, 9 - 11 September 2005, Kuantan, Pahang.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) Preparation of Carbon Adsorbent by Utilizing Waste Materials for LPG Gas Storage. In: KUSTEM 3rd Annual Seminar On Sustainability Science and Management, 4 - 5 May 20004, Kuala Terengganu.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) SHELL FROM PALM OIL TREE PREPARED FOR VALUABLE PRODUCTS (CARBON MOLECULAR SIEVE AND CARBON ADSORBENT). In: 3rd USM-JIRCAS Joint International Symposium Lignocellulose: Materials for the Future from the Tropics, 9 - 11 March 2004, Pulau Penang, Malaysia.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Suhaimi, Misha (2005) The Effect Of Activation In Carbon Adsorbent On Adsoprtion And Desorption Processes Of LPG Gas. In: Enhancing Research for Excellence: A Seminar for Research Achievement of KUTKM, 9 - 11 September 2005, Kuantan, Pahang.

Herawan, Safarudin Gazali and Mohamad, Imran Syakir and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Suhaimi, Misha (2005) The Effect Of Plastic Bag On Carbon Adsorbent In Adsorption Of LPG For Gas Storage. In: 3rd International Conference on Materials for Advanced Technologies (ICMAT2005), 3 - 8 July 2005, Singapore.

Herawan, Safarudin Gazali and Rohhaizan, Abdul Hakim and Ismail, Ahmad Faris (2012) Waste Heat Recovery From The Exhaust Of Natural Aspirated Engine. In: 3rd International Conference on Engineering & ICT (ICEI 2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2007) CARBON ADSORBENT FOR INCREASING THE CAPACITY OF ALTERNATIVE FUELS STORAGE IN VEHICLE. In: 2nd International Engineering Convention 2007 (InTEC 2007), 10 - 14 March 2007, Jeddah, Saudi Arabia.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2008) THE COMPARISON OF LPG AND NATURAL GAS ADSORPTION CAPACITY IN CARBON ADSORBENT. In: REACH'07, 18 - 20 January 2008, Kuala Lumpur.

Herawan, Safarudin Gazali and Sulaiman, Mohd Yusoff (2006) Determination the Carbon Adsorbents Effectiveness on Adsorption and Desorption Processes of LPG. In: JSPS-VCC Group Seminar 2006, Natural Resources and Energy Environment (Group 9), 11 - 12 December 2006, UTM, Johor.

Ifayefunmi, Olawale and Blachut, Jan (2014) Toricones: burst pressures. In: Proceedings of the twelfth International Conference on Computational Structures Technology, 2-5 September 2014, Naples, Italy.

J.A., Adnan and Minhat, Mohamad and Abd Rahman, Md Nizam (2012) Artificial Immune System (AIS) Algorithm For Optimizing Shear Zone Temperature In CNC Turning Operation. In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

Jamaludin, Zamberi and Minhat, Mohamad (2014) Review on Cutting Force Compensation Techniques for Machine Tools Application. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Jamaludin, Mohd Zaini and Abdul Kudus, Syahibudil Ikhwan and Mohd Rosli, Mohd Afzanizam and Salim, Mohd Azli (2012) Design And Manufacturing Of Formula Varsity Race Car Pedal System. In: 3rd International Conference on Engineering & ICT (ICEI 2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Jameel Abbas, Adnan and Minhat, Mohamad and Abd. Rahman, Md. Nizam (2013) Improvement Performance Characteristics of CNC Turning Operation by Exploit Immune System's Properties. In: 2nd International Conference on Computer Engineering and Mathematical Sciences (ICCEMS2013), 5-6 December 2013, Kuala Lumpur, Malaysia.

Jaya, A. S. M and Mohd Hashim, Siti Zaiton and Abd Rahman, Md Nizam (2010) Fuzzy Logic-Based For Predicting Roughness Performance Of Tiain Coating. In: International Conference on Intelligent Systems Design and Applications 2010, -, -. (Submitted)

K.M. Rajan, Rajes and Abdul Aziz, Mohd Zaidan Bin and T., Joseph Sahaya Anand (2012) ELECTROSYNTHESIZED NiS2 THIN FILMS AND THEIR CHARACTERIZATION STUDIES. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16, October 2012, Hotel Equatorial, Melaka.

Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad, Effendi and Abu Bakar, Mohd Hadzley and Minhat, Mohamad (2014) Analysis of Tool Performance during Ball-end Milling of Aluminium Alloy 6061-T6. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Kher, V.K. and Tan , Chee Fai and Sarban Singh, Ranjit Singh (2012) BUS ACCIDENTS PREVENTION WITH AN INTEGRATED STEERING SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4-5 April 2012, Melaka, Malaysia.

Kher, V.K. and Tan, CheeFai and Ranjit, S.S.S. (2012) BUS ACCIDENTS PREVENTION WITH AN INTEGRATED STEERING SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Khoo, Hui Ping and Chong, Shin Horng and Yahya , Abu Bakar (2014) Feature extraction on forearm using surface electromyography (sEMG) technique. In: IEEE EMBS International Student Conference (ISC), 5, June 2014, Universiti Putra Malaysia, Malaysia.

M. R, Said and M.K., Ismail (2012) Experimental investigation of Paper Honeycomb subjected to quasi-static loading. In: International Conference on Engineering, Applied Sciences, and Technology, November 21 – 24, 2012, , Swissôtel Le Concorde, Bangkok, Thailand.

M. R., Sapiee and Abdullah, F. and Noordin, A. and Jahari, A. N. (2008) PI Controller Design Using Model Reference Adaptive Control Approaches For A Chemical Process. In: 2008 Student Conference on Research and Development (SCOReD 2008) , 26-27 Nov. 2008, UTM, Johor.

M. R., Sapiee and Sudin, Shahdan (2009) Road Vehicle Following System with Adaptive Controller Gain Using Model Reference Adaptive Control Method. In: The Second International Conference on Control, Instrumentation and Mechatronic Engineering (CIM09), June 2-3, 2009, Melaka.

M.Y, YUHAZRI and A.M, HAIRUL EFFENDY and Y, JULIANA and A.S, RAHIM and M, NORAIHAM (2012) Study of CFRP Manufacturing Offcuts with Ssecondary Resin Impregnation via Hand Lay Up. In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and A.M, KAMARUL and A.H, RAHIMAH and HAERYIP, SIHOMBING and S.H, YAHAYA and K.F, SAMAT and R, IZAMSHAH (2012) Experimental Study on Effect of Reflector Bed Designs Heated by Direct Solar Radiation for Hot Water Storage System. In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and A.M, KAMARUL and S.H, YAHAYA and A.H, RAHIMAH and M.N, MASLAN and M, HAIRUL EFFENDY and HAERYIP, SIHOMBING (2012) Experimental Evaluation of Performance of Different Thermal Boxes Heated by Solar Radiation for Hot Water Storage System. In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and F.R, FAISAL and N.Z, SHARAFINA and A.M, HAIRUL EFFENDY and A.R, TOIBAH and S.T, RAHMAH and M.A, ASYADI AZAM and M, NORAIHAM (2012) Mechanical Properties of Polypropylene/Epoxidized Natural Rubber Blend via Mixing Ratio Analysis. In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and HAERYIP, SIHOMBING and S.H, YAHAYA and M.A, KAMELY and M.K, HANNAN (2012) The Measurement of Herzberg’ Employees Satisfaction using Kano Method. In: International Conference on Design and Concurrent Engineering , 15-16 October 2012, MELAKA.

M.Y, YUHAZRI and L, ABDULLAH and Z, JAMALUDIN and T.H, CHIEW and N.A, RAFAN (2012) Extensive Tracking Performance Analysis of Classical Feedback Control for XY Stage Ballscrew Drive System. In: 4th International Conference on Mechanical and Electrical Technology , 26-26 JULY 2012, KL.

M.Y, YUHAZRI and M, NORAIHAM and A.M, HAIRUL EFFENDY and M.O, SHAHRIZAN and M, ANDANASTUTI and J.G, JAMEELAH and M, DAHLAN and A, HUSNA (2012) Regression Model of Processability Properties of Epoxidized Natural Rubber-Alumina Nanoparticle Composites (ENRAN) using Historical Data Design. In: International Conference on Design and Concurrent Engineering, 15-16 October 2012, MELAKA.

M.Z, Hilwa and Woon Loong, Fu and Ismail, Nurhidayah (2012) Design And Development Of Microcontroller Based Localised Air Heater. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

MAT NURI @ MD DIN, NUR RASHID and POKAAD, ALIF ZULFAKAR and HUDHA, DR KHISBULLAH and MOHD NASIR, MOHD ZAKARIA (2009) SIMULATION OF AN ACTIVE FRONT BUMPER SYSTEM FOR FRONTAL IMPACT PROTECTION. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCEET) 2009, 20 - 22 JUNE 2009, UNIVERSITI MALAYSIA PAHANG.

Mamat, Rizalman and Abdullah, Nik Rosli and Tamaldin, Noreffendy (2010) Emissions of a Single Cylinder Diesel Engine Operating with Ethanol. In: ENGINEERING MECHANICS & TRANSPORT 2010 (EMT2010), 25-27 Nov 2010, LVIV, ukraine.

Mas'ud, Mohd Zaki and M. A, Faizal and Y., Asrul Hadi and N.M., Ahmad and Hamid , Erman (2011) Virtual Machine Based Autonomous Web Server. In: First IRAST International Conference on Data Engineering and Internet Technology (DEIT) , -, -. (Submitted)

Masjuri , Musa and Juhari, Ab. Razak and Md Razali , Ayob and Mohd Afzanizam, Mohd Rosli and Safarudin Gazali , Herawan and Kamaruzzaman, Sopian (2011) CFD anallysis on cost effective pico hydro turbine: A case study for low head and low flow rate condition. In: International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE SEAM 2011), 3-4 October , 2011., Solo, Indonesia.. (Submitted)

Masjuri , Musa and Juhari, Ab. Razak and Md. Razali , Ayob and Mohd Afzanizam, Mohd Rosli and Safaruddin Gazali , Herawan and Kamaruzzaman, Sopian (2011) Development of model system for cost-effective pico hydro turbine. In: 3rd International Symposium & Exhibition In Sustainable Energy & Environment (ISESEE) 2011, 1-3 June 2011, Avillion Legacy Hotel, Melaka. (Submitted)

Mat Lazi, Jurifa and Ibrahim, Zulkifilie and Sulaiman , Marizan and Jamaludin, Irma Wani and Yusuf Lada, Musa (2011) Performance Comparison Of Svpwm And Hysteresis Current Control For Dual Motor Drives. In: IEEE Applied Power Electronics Colloquium (IAPEC 2011), 19-21 April 2011, Impiana KLCC Hotel and Spa, Kuala Lumpur. (Submitted)

Mat Nuri @ Md Din, Nur Rashid and Mansor, Dr Shuhaimi and Abd Rahman, Muhammad Riza (2010) The Effect of Flow Characteristic on Generic Shape of an Automotive Side Mirror. In: 3rd International Graduate Conference on Engineering, Science and Humanity , 2 - 4 November 2010, Universiti Teknologi Malaysia.

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2014) The Effect on Friction Coefficient and Wear Rate of Palm Kernel Activated Carbon-Epoxy (PKAC-E) Composite at Different Temperatures. In: 3rd Malaysia-Japan Tribology Symposium 2014 (MJTS2014), 12-14 November 2014, Malaysia-Japan Internation Institute of Technology (MJJIT).

Md Ali, Mohd Amran and Mohd Sani, Siti Salmah and Raja Abdullah, Raja Izamshah and Abu Bakar, Md Ali and Sivarao, Subramonian and HUSSEIN, NUR IZAN SYAHRIAH and Hussain, Mohamad Zaki (2012) Optimization Parameters of Injection Moulding Machine For Reducing Warpage of Dog Bone Plastic Part. In: The 28th International Conference Of The Polymer Processing Society (PPS-28), 11-15 December, Pattaya.

Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Hussein, Nur Izan Syahriah and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Salleh, Mohd Rizal and Mohamad, Effendi and Subramonian, Sivarao and Liew, Pay Jun and Abdullah, Zulkeflee (2014) Performance of wire-EDM parameters on machining characteristics of titanium alloy (Ti6Al4V) using Taguchi method. In: Malaysia University Conference Engineering Technology 2015, 10-11 November 2014, Melaka.

Md Fauadi, Muhammad Hafidz Fazli and Murata, Tomohiro (2010) Makespan Minimization of Machines and Automated Guided Vehicles Schedule Using Binary Particle Swarm Optimization. In: International MultiConference of Engineers and Computer Scientists 2010, 17-19 March, 2010, Hong Kong.

Md Ghazaly, Mariam (2011) Basic Characteristics and Positioning of Multilayer Electrostatic Actuator Supported by Only Lubrication Oil. In: 2011 JSPE Autumn Meeting (2011) , September 2011, Japan.

Md Ghazaly, Mariam (2010) Control Performances of a Fine Motion Stage using a Multilayer Electrostatic Actuator without Precise Balls for Lubrication. In: 14th International Conference on Mechatronics Technology (ICMT 2010), 24 - 26 November 2010, Osaka, Japan.

Md Ghazaly, Mariam (2012) Effect of Driving Signals on Motion Characteristics of Multilayer Electrostatic Actuator Supported by Only Lubricating Liquid. In: Proceedings of the 4th International Conference on Positioning Technology (ICPT2012), 2012 Nov , Kaohsiung, Taiwan.

Md Ghazaly, Mariam (2014) The Evaluation of a Locking Function For a Vertical Stage Electrostatic Actuator. In: 12th International Conference on Motion and Vibration Control (MOVIC 2014), 3-7 August 2014, Hokkaido, Japan.

Md Ghazaly, Mariam (2011) Evaluation of a Multilayer Electrostatic Actuator for a Fine Motion Stage without Precise Balls for Lubrication. In: The 6th International Conference on Micromanufacturing (ICOMM2011), 7 - 10 March 2011, Tokyo, Japan.

Md Ghazaly, Mariam (2012) Friction Characteristic Switching Function and Ultra-Precision Positioning of Multilayer Electrostatic Actuator. In: 2012 JSPE Spring Meeting (2012), March 2012, Japan.

Md Ghazaly, Mariam (2010) Open-loop Characteristics of a Multilayer Electrostatic Actuator for a Fine Motion Stage. In: 14th International Conference on Mechatronics Technology (ICMT 2010), 24 - 26 November 2010, Osaka, Japan.

Md Ghazaly, Mariam (2012) Precision Vertical Fine Stage Using Multilayer Electrostatic Actuator Supported by Lubricating Liquids. In: 2012 JSPE Autumn Meeting (2012), September 2012, Japan.

Md Ghazaly, Mariam and Gan, Chin Kim (2005) Teaching of Electromagnetics Theory at Kolej Universiti Teknikal Kebangsaan Malaysia. In: Asia-Pacific Conference On Applied Electromagnetics (APACE2005), December 2005, Johor Bahru, Malaysia.

Md Ghazaly, Mariam and Mohd Ali, Nursabilillah and Mohd Sobran, Nur Maisarah and Ab. Shukur, Syahar Azalia and Tuani Ibrahim, Ahmad Fayeez (2013) Individual Processing Speed Analysis for Traffic Sign Detection and Recognition. In: the IEEE International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA), 26-27 November 2013, Kuala Lumpur, Malaysia..

Md Ghazaly, Mariam and Mohd Ali, Nursabilillah and Mohd Sobran, Nur Maisarah and Ab. Shukur, Syahar Azalia and Tuani Ibrahim, Ahmad Fayeez (2014) Traffic Sign Detection and Classification for Driver Assistant System. In: 8th International Conference on Robotic, Vision, Signal Processing & Power Applications, March 2014, Malaysia.

Md Ghazaly, Mariam and Tan, Aik Choon and Che Amran, Aliza and Sato, Kaiji (2014) Force Characterization of a Rotary Motion Electrostatic Actuator based on Finite Element Method (FEM) Analysis. In: International Conference on Design and Concurrent Engineeting (iDECON2014), 22 - 23 September 2014, Melaka, Malaysia.

Md Ghazaly , Mariam (2012) Driving Mode Control of A Multilayered Thin Electrostatic Actuator Supported By Lubricating Oil For Ultra-Precision Positioning. In: ASPE 2012 Summer Topical Meeting, 24 - 26 June 2012, California, USA.

Md Yusop, Azdiana and Noor Asyikin, Sulaiman (2008) VIBRATION CONTROL OF A GANTRY CRANE SYSTEM USING DYNAMIC FEEDBACK SWING CONTROLLER. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.

Minhat, Mohamad (2013) CNC Machine System Via STEP-NC Data Model and Lab VIEW Platform for Milling Operation. In: 2013 IEEE Conference on Open Systems (ICOS), December 2-4, 2013, Sarawak, Malaysia.

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function and STEP-NC Data Model. In: International Conference on Flexible Automation and Intelligent Manufacturing, June 10-13, 2012, Helsinki, Finland.

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm. In: iDECON 2014 – International Conference on Design and Concurrent Engineering, 21 - 23 September 2014, Melaka.

Minhat, Mohamad and Abd Rahman, Md Nizam and Abbas, Adnan Jameel (2014) Prediction of Optimum Cutting Conditions in Dry Turning Operations of S45C Mild Steel using AIS and PSO Intelligent Algorithm. In: international symposium on Research in Innovation and Sustainability 2014 (ISoRIS2014), 15-16 October 2014, Malacca.

Minhat, Mohamad (2011) An Assessment on Graphite Milling Characteristics. In: International Conference and Exhibition on Sustainable Energy andAdvanced Materials (ICE SEAM 2011), October 3-4, 2011, Solo-Indonesia.

Minhat, Mohamad (2012) Design and Machining Control via Interoperable Function Blocks and STEP-NC Data Model. In: 3rd International Conference on Design and Product Development (ICDPD 2012), December 29-31, 2012, Montreux, Switzerland.

Minhat, Mohamad (2012) Interoperable_CNC_Machine_via_Function_Block_and_STEP-NC_Data_Model_for_Milling_Operation. In: 4th International Conference on Mechanical and Electrical Technology , 26-26 JULY 2012, KL.

Minhat, Mohamad and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) RETROFITTING A CONVENTIONAL LATHE TO A DIGITAL INTELLIGENCE SYSTEM. In: International Conference on Artificial Intelligence and Computer Science (AICS 2014), 15 - 16 September 2014, Bandung, Indonesia.

Minhat, Mohamad and Xu, Xun (2008) Development of an Open Soft CNC System Based on STEP-NC and Function Blocks. In: 5th International CIRP-sponsored Conference on Digital Enterprise Technology (DET), 22-24 October 2008, Nantes, France.

Minhat, Mohamad and Xu, Xun (2010) ‘STEPNCFBUoA’ - An Advanced Manufacturing Control System based on STEP-NC and FB enabled technology. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Minhat, Mohamad and Xu, Xun (2009) A feature-based Machining Using Function Block Technology. In: IEEE International Conference on Control and Automation, December 9-11, 2009, Christchurch, New Zealand .

Mohamad, Noraiham and Zainol, Nur Sharafina and ABD RAZAK , JEEFFERIE (2013) MORPHOLOGICAL & MECHANICAL PROPERTIES OF POLYPROPYLENE/EPOXIDIZED NATURAL RUBBER THERMOPLASTIC VULCANIZATES TREATED WITH MALEIC ANHYDRIED-GRAFTED POLYPROPYLENE. In: International Conference on Mechanical Engineering Research, 1-3th July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

Mohamad, Imran Syakir and Herawan, Safarudin Gazali and Mohd Husin, Mohd Haizal and Yusof, Ahmad Anas and Mat Tokit, Ernie (2004) THE STUDY OF LPG ADSORPTION ABILITY USING CARBON ADSORBENT TEST BED FOR CARBON ADSORBENT PREPARED FROM WASTE MATERIALS. In: Simposium Kimia Analisis Malaysia Ke 17 (SKAM-17), 24 - 26 August 2004, Kuantan, Pahang.

Mohamad, Noraiham and Abdul Hamid, Nor Nadiah and ABD RAZAK , JEEFFERIE and Mohd Fairuz, Dimin (2013) EFFECT OF CHITOSAN GELATINIZATION TEMPERATURE ON WATER ABSORPTION AND WATER RETENTION OF CHITOSAN BASED UREA FERTILIZER. In: International Conference on Mechanical Engineering Research, 1-3rd July 2013, Bukit Gambang Resort City, Kuantan, Pahang.

Mohamad, Noraiham and Mahamood, Mazlin Aida and Yaakub, Juliana and Abdul Razak, Jeefferie and Muchtar, Andanastuti and Shueb, Mohammed Iqbal and Kasim, Mohd Shahir and Mohd Abid, Mohd Asyadi Azam and Yaakob, Mohd Yuhazri and Mustafa, Nuzaimah and Toibah, Abd Rahim and Qumrul, Ahsan (2013) FUNCTIONALISATION OF ETHYLENE-PROPYLENE COPOLYMER (EPM) BY MELT GRAFTING OF MALEIC ANHYDRIDE (MAH) USING HIGH SHEAR INTERNAL MIXER. In: International Conference on the Science and Engineering of Materials, 13-14 Nov 2013, Kuala Lumpur, Malaysia.

Mohamad Sapiee, Mohd Razali and Noordin, Aminurrashid and Basar, Mohd Farriz and Rasin, Zulhani and Talib, Md Hairul Nizam (2010) Road vehicle following system with adaptive controller gain using model reference adaptive control method lyapunov approaches. In: The 2nd International Conference on Engineering and ICT (iCEi2010), 18 -20th February 2010,, Melaka.

Mohamad Shukri , Zakaria (2011) Numerical Investigation of 2D Lid Driven Cavity using Smoothed Particle Hydrodynamics (SPH) Method. In: The 4th International Meeting of Advances in Thermofluids, 3 - 4 oct 2011, Melaka.

Mohamed, Saiful Bahri and Abbas, Adnan Jameel and Minhat, Mohamad (2013) A Review on Intelligence STEP-NC Data Model and Function Blocks CNC Machining Protocol. In: 1st International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC 2013), December 4-6, 2013, Johor Bahru, Malaysia.

Mohammad, Janatul Islah and Johari, Norhasnira and Said, Md. Radzai and Mohd. Nor, Mohd. Jailani (2011) Experimental results on sound absorption coefficients of Malaysian woods. In: International Conference on Noise 2011, 4-7 Sept 2011, Osaka Japan.

Mohammad Nasir, Mohd Zakaria and Amir, Mohd Zubir and Hudha, Khisbullah and ABDULLAH, Mohd Azman and Hassan, Muhammad Zahir (2012) MODELING AND VALIDATION OF SIX-BAR RACK AND PINION STEERING LINKAGE SYSTEM. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Mohd , amran and Salmah, Siti and Hussein, Nur Izan Syahriah and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2013) Effects of Machine Parameters on Surface Roughness Using Response Surface Method in Drilling Process. In: Malaysian International Tribology Conference , November 18-20, 2013, Kota Kinabalu, Sabah, Malaysia.

Mohd , amran and Salmah, Siti and Zaki, M and Raja, Izamshah and Mohd , Hadzley and Sivarao, Subramonian and Mohd Shahir, Kasim and Mohd Amri , Sulaiman (2013) Study the effects of pressure on warpage of dumbbell plastics part in injection moulding machine. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Amran, Md Ali and Mohd Faizal, Khalik (2014) Effect of injection moulding process parameters on plastic part quality in transparent glass mould. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Ali, Fara Ashikin and Syed Abdul Hamid , Syed Mohamad Shazali and Md Basar, Mohd Farriz (2011) Performances Evaluation And Comparison Of Two Algorithms For Fuzzy Logic Rice Cooking System (MATLAB Fuzzy Logic Toolbox And Fuzzy Tech). In: 2011 IEEE Conference On Open Systems (ICOS2011), , 25-28 September 2011, Langkawi, Kedah.

Mohd Azmi, Mohd Irwan and Yeoh, Chit Chuan and Mat Tokit, Ernie and Razali, Nadlene and Abdul Munir, Fudhail and Nordin, Mohd Nur Azmi and Mat Nuri @ Md Din, Nur Rashid (2011) The effect of contact angle on triangular shape interrupted microchannel heat sinks performance. In: THE 4TH INTERNATIONAL MEETING OF ADVANCES IN THERMOFLUIDS (IMAT 2011), 3 - 4 OKTOBER 2011, MELAKA.

Mohd Fadzli, Abdollah and Mohd Azli , Salim and Tee, Boon Tuan (2016) Proceeding Of Mechanical Engineering Research Day 2016 (MERD’16). In: https://books.google.com.my/books?id=YZfACwAAQBAJ, 31 March 2016, Kampus Teknologi, Universiti Teknikal Malaysia Melaka (UTeM).

Mohd Irwan, Mohd Azmi and Nazri, Md Daud and Fudhail, Abdul munir and Suhaimi , Misha (2011) Mesoscale Simulation of Natural Convection in Square Cavity Driven by Discrete Two Source-Sink Pairs On One Sidewall. In: 2011 International Conference On Computer & Communication Devices (ICCCD 2011), 1 April - 3 April 2011, Bali, Indonesia.

Mohd Khairir, Ismail and Md Radzai , Said and Mohd Firdaus, Zakaria (2011) The specific energy absorption of local wood subjected to quasi-static loading. In: International Conference on Application and Design in Mechanical Engineering 2012, ICADME2012, 27-25 Feb 2012, Pulau Pinang.

Mohd Najib, Ali Mokhtar and Nik Syahrim , Nik Anwar and Mohd Nazrin , Muhammad and Masni Azian, Akiah and Saifudin Hafiz , Yahaya (2012) MOTION SYNTHESIS OF PLANAR FOUR LINKAGE MOVEMENT FOR PART FLIPPING APPLICATION. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Mohd Najib , Ali Mokhtar and Fairul Azni , Jafar (2011) Finite Element Analysis of Plate Structure Excited by Patches of Piezoelectric Actuators. In: PROCEEDINGS OF MALAYSIAN TECHNICAL UNIVERSITIES INTERNATIONAL CONFERENCE ON ENGINEERING AND TECHNOLOGY, 13-15 November 2011, Katerina Hotel Batu Pahat, Johor.

Mohd Nor, Rozilawati and Chong, Shin Horng (2013) Continuous Motion NCTF control of a one mass rotary system. In: 2nd International Conference on Electrical, Control and Computer Engineering (InECCE), August 27-28, 2013, Kuantan, Malaysia.

Mohd Nor, Rozilawati and Chong, Shin Horng (2013) Positioning control of a one mass rotary system using NCTF controller. In: IEEE International Conference on Control System, Computing and Engineering, 29 Nov - 1 Dec 2013, Penang, Malaysia.

Mohd Nor, Rozilawati and Chong, Shin Horng (2014) Robustness evaluation for point-to-point control of a one mass rotary system. In: The 14th International Conference on Control, Automation & Systems (ICCAS), 22-25, October 2014, Seoul, South Korea.

Mohd Saat, Fatimah Al Zahrah and Jaworski, Artur (2013) Oscillatory Flow and Heat Transfer Within Parallel-plate Heat Exchangers of Thermoacoustic Systems. In: World Congress on Engineering 2013, 3-5 July 2013, Imperial College, London.

Mohd Saat, Fatimah Al Zahrah and Mohd Ghazali, Normah (2009) Cooling Enhancement through Pulsation Flow in Microchannel Heat Sink. In: World Congress of Science, Engineering and Technology, 27-29 May 2009, Tokyo. Japan.

Mohd Saat, Fatimah Al Zahrah and Yu, Zhibin and Jaworski, Artur (2012) CFD modelling of flow and heat transfer within the parallel plate heat exchanger in standing wave thermoacoustic system. In: 19th Internation Congress on Sound and Vibration, 8-12 July 2012, Vilnius, Lithuania.

Mohd Zulkefli, Selamat and Reduan, Mat Dan (2015) Proceeding Of Mechanical Engineering Research Day 2015 (MERD’15). In: Proceeding Of Mechanical Engineering Research Day 2015 (MERD’15), 31 March 2015, Kampus Teknologi, Universiti Teknikal Malaysia Melaka (UTeM).

Muhammad Suhaizan , Sulong and Mohd Shahir, Kasim and Azlianor Abdul , Aziz and Muhammad Hafidz Fazli, Md. Fauadi (2008) A Mobile Application Architecture for Measuring Shaft Misalignment. In: International Conference on Plant Equipment and Reliability (ICPER), 27-28 March 2008, Selangor.

Noordin, A. and Salim, M.A. and M. R., Sapiee and Sabikanee, S. and Hasan, M.H.C. and Md. Sani, Z. and Othman, M.H. (2012) Development of a Quadruped Crawling Robot Prototype. In: THE 3RD INTERNATIONAL CONFERENCE ON ENGINEERING & ICT (ICEI2012), 4-5 April 2012, Melaka.

Nooririnah, Omar and Jeefferie, Abd Razak and Yuhazri, Yaakob and Toibah, Abd Rahim (2010) Effect of CO2 Flow Rate and Calcination Temperature on the Synthesis Nanosized Precipitated Calcium Carbonate. In: 2nd ASEAN-APCTP Workshop on Advanced Materials Science and Nanotechnology Penang, Malaysia, 21-23 December 2010, Penang.

Nooririnah, Omar and muhamad azwar, azhari and Umar , Al-amani and Yusliza, Yusuf and Mohd faiz , wahid (2014) INFLUENCE OF CALCIUM HYDROXIDE CONCENTRATION ON THE SYNTHESIS NANOSIZED PRECIPITATED CALCIUM CARBONATE. In: 8th MUCET 2014, 10-11 November 2014, Melaka.

Nur Aidawaty , Rafan and Zamberi, Jamaludin and Tsung , Heng Chiew and Lokman , Abdullah and Mohd Nazmin , Maslan (2014) Quadrant glitch analysis for ball screw driven positioning stage using friction compensation model feedforward. In: International Symposium on Research in Innovation and Sustainability 2014, 15-16 October 2014, Universiti Teknikal Malaysia Melaka. (In Press)

Nur Rashid, Mat Nuri @ Md Din and Ir. Dr. Shuhaimi, Mansor (2011) Simulation of Air Flow on Modified Generic Shape of an Automotive Side View Mirror. In: 2nd International Conference on Mechanical and Manufacturing Engineering (ICME 2011), 6 - 8 June 2011, PICC, Putrajaya.

Omar, Ghazali and Tamaldin, Noreffendy and Muhamad, M. Rasat (2000) Correlation of silicon wafer strength to the surface morphology. In: (ICSE 2000)- IEEE International Conference on Semiconductor Electronics, 2000., 13-15 Nov 2000, Guoman Resort, Port Dickson.

Phuman Singh, A.S. and Safarudin, Mochamad and Sihombing, Haeryip (2010) Rollover Prevention System for Passenger Vehicle. In: International Conference on Design and Concurrent Engineering 2010, 20-21 September 2013, Universiti Teknikal Malaysia Melaka (UTeM), Melaka.

Phuman Singh, A.S. (2011) Enhancement of SUV Roll Dynamics using Fuzzy Logic Control. In: 2011 First International Conference on Informatics and Computational Intelligence, 12-14 December 2011, Bandung, Indonesia.

Putra, Azma (2011) Application of Micro-perforated Panel (MPP) in a Vehicle Vabin: Overcoming the ‘Mass-Air-Mass’ Resonance. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Determination of Vibration Strength of a Small Structure-Borne Source Using a High Mobility Reception Plate. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Dried Paddy Straw Fibers as an Acoustic Absorber: A Preliminary Study. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma (2011) Employing the micro-perforated panel in the vehicle cabin: Is this possible? In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Putra, Azma (2011) Experimental Investigation on the Effect of Liquid Fill Level in a Container to Liquid Sloshing. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Putra, Azma (2011) Investigation on Natural Waste Fibers from Dried Paddy Straw as a Sustainable Acoustic Absorber. In: 2011 IEEE First Conference on Clean and Technology CET, 27-29 June, Kuala Lumpur, Malaysia.

Putra, Azma (2011) On a Simple Technique to Measure the Airborne Noise in a Motor Vehicle using Source Substitution. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Putra, Azma and Fariza, Noor and Ramlan, Roszaidi (2012) CHARACTERIZATION OF A STRUCTURE- BORNE SOURCE USING THE RECEPTION PLATE METHOD. In: 3rd International Conference of Engineering and ICT 2012, 4 - 6 April 2012, Melaka.

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2012) INSERTION OF A MICRO-PERFORATED PANEL TO IMPROVE SOUND TRANSMISSION LOSS OF A DOUBLE-LEAF PARTITION. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Putra, Azma and Ismail, Ahmad Yusuf and Ayob, Md Razali (2011) Sound transmission loss of a double-leaf solid-microperforated partition under normal incidence of acoustic loading. In: INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND AEROSPACE EGINEERIN 2011 (ICMAAE '11), 17 May 2011, Kuala Lumpur.

Putra, Azma and Sajidin, Muhammad and Salleh, Norliana and Hady, Efendy (2012) MODELLING THE EFFECT OF VIBRATION ON THE SOUND ABSORPTION PERFORMANCE OF GREEN SOUND ABSORBER USING WAVE PROPAGATION TECHNIQUE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 6 April 2012, Melaka, Malaysia .

Putra, Azma (2010) THE CONTRIBUTION OF MOMENT EXCITATION ON THE UNCERTAINTY IN THE VIBRATION INPUT POWER TO A STRUCTURE. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 2010, 28-30th June, 2010, Putra Jaya, Malaysia.

Putra, Azma (2013) Fabricating Process and Mechanical Properties of Elastomeric Mount. In: The 7th South East Asia Technical University Consortium (SEATUC) Symposium , March, 4-6 2013, Bandung, Indonesia.

Razali, Sazalinsyah and Meng, Qinggang and Yang, Shuang-Hua (2010) A Refined Immune Systems Inspired Model For Multi-robot Shepherding. In: 2nd World Congress on Nature and Biologically Inspired Computing (NaBIC) , 15-17 Dec 2010, Fukuoka, Japan. (Submitted)

Roni Sahroni, Taufik and Kamaruddin, Mohammad Aizrulshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Mohamad, Effendi and Ito, Teruaki (2014) Design and optimization of runner and gating systems for permanent mould casting. In: 24th Design Engineering Systems Division JSME Conference Japan Society of Mechanical Engineers, 17-19th September, JSME Conference Japan Society of Mechanical Engineers, .

Rosley, Mohammad Nazry and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli and Zakaria, Muhammad Zulfattah and Mat Yamin, Ahmad Kamal (2016) Emission Characteristics of Hydrogen Enrichment in Light Duty Single Cylinder Diesel Engine. In: The 4th International Conference on Engineering and ICT (ICEI 2016), 4 April 2016 - 6 April 2016, Hatten Hotel Melaka. (Submitted)

S, Thiruchitrambalam and SUNDARAM, HEMAVATHI and PANDEY, SUNIL (2012) A Prediction Of Welding Process Control Variables By Prediction Of Weld Bead Geometry Using Factorial Design Approach. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

S.THIRU,, CHITRAMBALAM and S.HEMA, VATHI and PANDEY, SUNIL (2012) A PREDICTION OF WELDING PROCESS CONTROL VARIABLES BY PREDICTION OF WELD BEAD GEOMETRY USING FACTORIAL DESIGN APPROACH. In: 3rd International Conference on Engineering and ICT (ICEI2012) Melaka, Malaysia , 4 – 5 April 2012, Melaka, Malaysia.

S.THIRU,, CHITRAMBALAM and S.HEMA,, VATHI and AHMAD, RIVAI and PANDEY, SUNIL (2011) A Comparison Study on Relationship Between Welding Current and Penetration for Plasma Enhanced Shielded Metal Arc Welding(PESMAW). In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, Batu Pahat, Malaysia.

SAID, MD RADZAI and Tahir, A.S (2011) THEORETICAL ANALYSIS OF QUASI-STATIC COMPRESSION OF HEXAGONAL RING. In: The 5th PSU-UNS International Conference on Engineering and Technology, 2-3 May 2011, Phuket.

SAID, MD RADZAI (2012) Dynamic Axial Crushing Of Empty Hexagonal Tube. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Said, M. R. and Ismail, M. K. and Md Akil, H (2012) DYNAMIC BEHAVIOUR OF PAPER HONEYCOMB SANDWICH PANELS. In: The 15th International Conference on Applied Mechanics and Mechanical Engineering, 29-31 May 2012, Cairo.

Sakidin, Hamzah (2012) Hydrostatic Unbab Mapping Function Moditification For Tropospheric Delay. In: Regional Conference on Applied and Engineering Mathematics (RCAEM-II 2012) , 30-31 Mei 2012, Pualu Pinang. (Submitted)

Sakthivelu, Vasanthan and Chong, Shin Horng (2013) Motion control of pneumatic muscle actuator: experimental setup and modeling. In: IEEE Student Conference on Research and Development (SCOReD) 2013, December 16-17, 2013, Palm Garden Hotel, Putrajaya, Malaysia.

Sakthivelu, Vasanthan and Chong, Shin Horng (2015) Motion control of a 1-DOF pneumatic muscle actuator positioning system. In: The 10th Asian Control Conference , May 31 - June 3, 2015, Kota Kinabalu, Sabah, Malaysia.

Sakthivelu, Vasanthan and Chong, Shin Horng and Md Ghazaly, Mariam (2014) Modeling the Pneumatic Muscle Actuator using Phenomenological Model. In: 2nd Power and Energy Conversion Symposium (PECS) 2014, May 2014, Malaysia.

Salim, Mohd Azli and Noordin, Aminurrashid and Abd Munir, Fudhail and Mat Nuri, Nur Rashid (2012) The Relationship of Contact Angle and Input Shaping Scheme in Automotive Wiper System. In: 2012 IEEE RIVF International Conference on Computing & Communication Technologies, Research, Innovation, and Vision for the Future, March 2012, Ho Chi Minh City, Vietnam.

Salim, Mohd Azli and Noordin, Aminurrashid and Mansor, Muhd Ridzuan (2012) A PRELIMINARY STUDY OF LOWER SIDE BEAM STRUCTURE ON LONGITUDINAL BRIDGE MODEL. In: 3rd International Conference on Engineering and ICT (ICEI2012), 2012, Mahkota Hotel, Melaka.

Samsudin, Abdul Rahim and Sivarao, Subramonian (2008) Effect of Pressure, Frequency and Duty Cycle on Laser Cut Surface. In: Malaysian Technical Universities Conference on Engineering and Technology, March 8-10, 2008, Putra Palace, Perlis, Malaysia.

Saptari, Adi and Poh Kiat, Ng (2013) Applying Clockwise and Counterclockwise Torque Directions in Pinch Grips: A Descriptive Study. In: 4th International Conference on Mechanical and Manufacturing Engineering 2013, Dec 17, 2013 - Dec 19, 2013, Equatorial Hotel, Bangi- Putrajaya.

Saul, Jonathan and Porters, Sophie and Mat Yamin, Ahmad Kamal and Medina, Humberto and Aleksandrova, Svetlana and Benjamin, Stephen (2015) Influence of cyclic variance on the performance of URANS for pulsating flow upstream of an automotive catalyst monolith. In: IMechE internal Combustion Engines 2015, 02 December 2015 - 03 December 2015, Royal College of Physicians, London.

Seri Rahayu , Kamat and Norhidayah, Hashim and Mohd Shahrizan, Othman (2014) Diminish muscle activity by changing an anthropometry data with appropriate workstation among workers in aerospace manufacturing industry. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Sivakumar, Dhar Malingam (2004) APPLICATION of TOTAL PRODUCTIVE MAINTENANCE to REDUCE NON-STICK ON PAD PROBLEM in a SEMICONDUCTOR INDUSTRY. In: 3rd INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING TECHNOLOGY (ICAMT 2004), 11-13 May 2004, Kuala Lumpur, Malaysia.

Sivakumar, Dhar Malingam (2012) EFFECT OF PROCESS PARMAETRS DURING FORMING OF SELF REINFORCED – PP BASED FIBER METAL LAMINATE. In: Mechanics of Nano, Micro and Macro Composite Structures, 18-20 June 2012, Politecnico di Torino.

Sivakumar, Dhar Malingam (2012) FORMING ANALYSIS OF COMPOSITE AND FIBRE-METAL LAMINATE SYSTEMS. In: ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 24-28 June 2012, Venice, Italy.

Sivakumar, Dhar Malingam (2010) FORMING ANALYSIS OF METAL-COMPOSITE SANDWICH STRUCTURES. In: 14TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 7-10 June 2010, Budapest, Hungary.

Sivakumar, Dhar Malingam (2012) FORMING ANALYSIS OF SELF-REINFORCED POLYPROPYLENE BASED COMPOSITE-ALUMINIUM HYBRID STRUCTURES. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4 – 5 April 2012, Melaka, Malaysia.

Sivakumar, Dhar Malingam (2011) An Investigation of Forming Analysis of Fibre-Metal Laminates through Experimental and Finite Element Analysis. In: Nineteenth International Symposium on Processing and Fabrication of Advanced Materials (PFAM XIX) Conference., Jan. 14, 2011 - Jan 17, 2011, Auckland, New Zealand.

Sivakumar, Dhar Malingam (2010) Stretch Forming Studies on Thermoplastic Composite. In: 6th Australasian Congress on Applied Mechanics, ACAM 6 , 12-15 December 2010, Perth, Australia.

Sivakumar, Dhar Malingam (2010) A study on the forming analysis of a self-reinforced polypropylene based composite-aluminium hybrid structures. In: 6th Australasian Congress on Applied Mechanics, ACAM 6 , 12-15 December 2010, Perth, Australia.

Sivakumar, Dhar Malingam and Sivarao, Subramonian and Ahmad, Rivai and Tan , Chee Fai and Mohd Radzai , Said (2006) BUCKLING BEHAVIOUR OF ANGLE SECTION BEAM WITH THE UNSTIFFENED FLANGES IN COMPRESSION. In: National Conf. On Design and Concurrent Engineering (DECON 2006), 9-10 August 2006, Melaka, Malaysia.

Sivakumar, Dhar Malingam and Sivarao, Subramonian and Tan, Chee Fai (2006) ENGINEERING AESTHETICS AND AESTHETICS ERGONOMICS EVALUATION TOOLS IN PRODUCT DESIGN AND DEVELOPMENT. In: National Conf. On Design and Concurrent Engineering (DECON 2006), 9-10 August 2006, Melaka, Malaysia.

Sivakumar, Dhar Malingam and Tan, Chee Fai and Abu Bakar, Abdul Hamid and AA, Mokthar and Sanjay, C (2005) Finite Element Analysis on Bending of Thin Walled Channel Section Beams of Shallow Open Sections. In: 2nd Int. Conf. On Mechatronics (ICOMS 2005), 10-12 May 2005, Kuala Lumpur, Malaysia.

Sivarao, Subramonian (2007) LINGUISTIC FUZZY MODELING IN LASER MACHINING QUALITY EVALUATION. In: Malaysian Science and Technology Congress (MSTC2007), 4-6 September 2007, Holiday Villa, Kuala Lumpur.

Sivarao, Subramonian and Samsudin, Abdul Rahim and Taufik, , and Ammar, Abd Rahman (2007) Coating Characterization of TiN & TiAlN on Burr Formation in Drilling – Pragmatic Investigation. In: International Conference on Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Sivarao, Subramonian and Taufik, , (2009) Comparative Quality Investigation of Rolled and Flat Carbon Steel Plates in Drilling. In: International Conference On Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Sivarao, Subramonian and Taufik, , (2007) Design and Development of an Automobile Brake Lining Monitoring System. In: International Conference on Engineering &ICT (ICEI’07), 27-28 Nov. 2007, Equatorial Hotel, Melaka.

Sivarao, Subramonian (2005) FUZZY MODELING OF TOOL WEAR IN DRILLING. In: 18th International Congress of Mechanical Engineering, November 6-11, 2005, Ouro Preto, MG .

Sivarao, Subramonian (2007) MICRO QUALITY INVESTIGATION OF Mn-Mo PRESSURE VESSEL PLATE IN LASER MACHINING. In: World Engineering Congress 2007, 5 – 9 August 2007, Penang, Malaysia.

Sivarao, Subramonian (2008) Super Saving Cooling System: A New Design and Analysis for Home Air-Conditioning. In: Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), 24 – 27 November 2008, Curtin University of Technology, Miri, Sarawak.

Sivarao, Subramonian and Azhar Shah, Abu Hassan and Rizal, M S and A. M., Kamely and Tajul Ariffin, Abdullah and Taufik, , (2009) MECHANICAL PROPERTIES MODIFICATION OF POLYETHYLENE (PE) FOR CaCO3 PARTICULATED COMPOSITES. In: The International Conference on Advances in Materials and Processing Technologies (AMPT ‘09), 26-29 October 2009, Kuala Lumpur, Malaysia.

Sivarao, Subramonian and Azhar Shah, Abu Hassan and Rizal, M S and Ahmad , Kamely and Tajul Ariffin, Abdullah and Taufik, , (2009) CHARACTERIZING CHICKEN EGGSHELL REINFORCED POLYPROPYLENE (PP). In: The International Conference on Advances in Materials and Processing Technologies (AMPT ‘09), 26-29 October 2009, Kuala Lumpur, Malaysia.

Sivarao, Subramonian and Aziz, Alif and Hambali, A and Salleh, Mohd Rizal and T.J.S, Anand and Raja, Izamshah and Nur, izan and A.R.M, Warikh (2013) SUPER ENERGY SAVING LOCKING SYSTEM (SES- LOCK). In: Program Pemindahan Ilmu (KTP01), 21 Ogos, Bangi Malaysia.

Sivarao, Subramonian and Dimin @ Mohd Amin, Mohd Fairuz and Faris N. M. F. and Arep @ Ariff, Hambali and Dhar Malingam, Sivakumar and Salit, Mohd Sapuan (2013) Analytical hierarchy process for design selection of micro hot-marking tool. In: 3rd International Conference and Exhibition on Sustainable Energy and Advanced Material, 30-31 October 2013, Melaka, Malaysia.

Sivarao, Subramonian and Qumrul, Ahsan and Mohd Amran, Md Ali and T.J.S, Anand and RAJA ABDULLAH, RAJA IZAMSHAH and Aziz, Alif (2013) Friction Performonce Anolysis of woste Tire Rubber Powder Reinforced polypropylene using pin-on-Disk Tribometer. In: Malaysian International Tribology Conference ( MITC), November 18-20, Kota Kinabalu, Sabah.

Sivarao, Subramonian and Rizal, M S and Tajul Ariffin, Abdullah and Taufik, , (2009) Development of Man-Machine Interface Using Matlab: An Adaptive Network-Based Fuzzy Inference System Modeling For Laser Machining. In: International Conference on Man Machine Systems (ICoMMS ‘09), 11-13 October 2009, Penang, Malaysia.

Sivarao, Subramonian and Tajul Ariffin, Abdullah and Taufik, , (2009) Design and Development of Automatic Tyre Pressure Controller. In: International conference on Applications and Design in Mechanical (ICADME ‘09), 11-13 October 2009, Penang, Malaysia.

Sivarao, Subramonian and Tajul Ariffin, Abdullah and Taufik, , (2009) Micro Sensor Embedded Brake Pad Monitoring System. In: International conference on Applications and Design in Mechanical (ICADME ‘09), 11-13 October 2009, Penang, Malaysia.

Sivarao, Subramonian and sivasan, karan nair (2008) Regression Model Development For Two Layer Control System Based on Engine RPM. In: Curtin University of Technology Science and Engineering International Conference 2008 (CUTSE 2008), 24 – 27 November 2008, Curtin University of Technology, Miri, Sarawak. (Submitted)

Sudin, Mohd Nizam (2010) THE ROLE OF A SPECIFICATION IN THE DESIGN PROCESS: A CASE STUDY. In: INTERNATIONAL DESIGN CONFERENCE - DESIGN 2010, 17-20 May 2010, Dubrovnik - Croatia.

Suhaimi, Misha and Herawan, Safarudin Gazali and Md Daud, Nazri (2010) THE USAGE OF SOLAR ENERGY TO REDUCE HOT TEMPERATURE IN THE CAR. In: Seminar Kebangsaan Aplikasi Sains dan Matematik 2010 (SKASM 2010) : sempena Simposium Kebangsaan Sains Matematik ke 18 (SKSM 18), 8 - 10 December 2010, Johor Baharu.

Suhaimi, Misha and Md Daud, Nazri and Wasbari, Faizil and Herawan, Safarudin Gazali (2011) The Design and Development of Oven Using Dissipative Heat from Refrigerator. In: International Conference on Mechanical, Automotive and Aerospace Engineering 2011 (ICMAAE 2011) , 17 - 19 May 2011, Kuala Lumpur.

Suraya, Laily and Mohd Amran, Md Ali and Nur Izan Syahriah, Hussein and Muhamad, Mohd Razali and RAJA ABDULLAH, RAJA IZAMSHAH and Taufik, Roni Sahroni (2014) The effect of EDM die-sinking parameters on surface integrity for aluminium composite using copper electrode. In: International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), 15 and 16 October 2014, PPS UTeM .

Syed Salim , Syed Najib and Mohd Fua'ad , Rahmat and Noorhazirah, Sunar and Ahmad 'Athif , Mohd Faudzi and Zool Hilmi, Ismail and Shamsul Anuar, Shamsudin (2014) Practical robust control using Self-regulation Nonlinear PID controller for pneumatic positioning system. In: Proceeding of International Conference on Electrical Engineering, Computer Science and Informatics (EECSI 2014), 20-21 August 2014, Yogyakarta, Indonesia.

Syed Salim , Syed Najib and Rahmat, Mohd Fua'ad and Mohd Faudzi, Ahmad 'athif and Ismail, Zool H. and Sunar, Noorhazirah and Sharatul Izah, Sharatul Izah (2013) TRACKING PERFORMANCE AND DISTURBANCE REJECTION OF PNEUMATIC ACTUATOR SYSTEM. In: Control Conference (ASCC), 2013 9th Asian, 23-26 June 2013, Istanbul.

T., Joseph Sahaya Anand and Mei Ying, Lim and Mazalan, Nor Hamizah (2011) Electrodeposited MoTe2 Thin Films for Photoelectrochemical (PEC) Cell Applications. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

T., Joseph Sahaya Anand (2011) TEM Studies of SPUTTER-DEPOSITED Ni4Al Alloy Thin Films. In: International Conference on Nanotechnology and Ultrasound, 12 - 14 January 2011, Tiruchirapalli, INDIA.

T., Joseph Sahaya Anand and Abdul Aziz, Mohd Zaidan Bin and S., Shariza (2012) Effect of Additives on Optical Measurements of NiSe2 Thin Films. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET) 2012, November 20 - 21, 2012, SERI Malaysia Hotel, Kangar.

T., Joseph Sahaya Anand and Abdul Aziz, Mohd Zaidan Bin and K.M.Rajan, Rajes (2012) Electrosynthesized NiSe2 thin films and their characterization studies. In: International Conference of Young Researchers on Advanced Materials, July 1 - 6, 2012, MATRIX Building, National University of Singapore (NUS), Singapore. (Unpublished)

T., Joseph Sahaya Anand and Mei Ying, Lim and Mazlan, Nor Hamiza (2011) Synthesis and Characterization of MoTe2 Thin Films for Photoelectro-chemical Cell Applications. In: United Kingdom - Malaysia - Ireland Engineering Science Conference 2011 , 12-14 July 2011, University of Malaya, 50603 Kuala Lumpur, Malaysia.

T., Joseph Sahaya Anand and Mohd Zaidan, Abd Aziz (2013) Electro synthesised NiTe2 Thin Films with the Influence of Additives. In: Joint International Conference on Nanoscience, Engineering and Management, 19-21, August, 2013, Penang. (In Press)

T., Joseph Sahaya Anand and S., Shariza and Lim, Mei Ying (2012) Transition Metal Chalcogenide Thin Films for Photoelectrochemical / Solar Cells. In: 3rd Infineon-MMU Technical Symposium, 9 April 2012, Multimedia University, Melaka.

T., Joseph Sahaya Anand and Sivarao, Subramonian and K., Ganesh Kumar (2012) Mechanical and Chemical Properties of intermetallic Ni3Al for Automotive Body. In: Seminar Hasil Penyelidikanm, KPT, 8 - 9 November 2012, AKEPT, Bandar Enstek,KL.

T. Joseph, Sahaya Anand and S., Shariza and Z. M. , Rosli (2011) Structural and Optical Properties of Electrodeposited MoS2 Thin Films for Photoelectrochemical (PEC) / Solar Cell Applications. In: International Conference on Advanced Manufacturing 2011 , May 23 – 24, 2011, TATi University College, , Terengganu.

Tan, Chee Fai and Jong , Eng Ling and Keng , Wei Pin and Shaaban, Azizah and Kher, V.K. (2012) DESIGN OF A UREA GRANULATOR WITH ENERGY OPTIMIZATION. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Tan, CheeFai and Alkahari, M.R. and Abdul Rahman, M. N. (2011) Development of Ground Vehicle for Fire Fighting Purpose. In: Hari Penyelidikan 2011, Fakulti Kejuruteraan Mekanikal, Universiti Teknikal Malaysia Melaka, 20 Julai, Melaka, Malaysia.

Tan, CheeFai and Jong, E.L. and Keng, W.P. and Shaaban, A. and Kher, V.K. (2012) DESIGN OF A UREA GRANULATOR WITH ENERGY OPTIMIZATION. In: The 3rd International Conference on Engineering & ICT, 4-5 April, Melaka.

Tan, Chee Fai and Md Radzai , Said and Shamsul Anuar, Shamsudin (2006) The effect of inner diaphragms and continuous sill selection of automotive B-pillar. In: Seminar Pencapaian Penyelidikan KUTKM (REACH 2006), 18 - 20 Disember 2006, Holiday Inn Resort, Batu Feringgi, Pulau Pinang. (Submitted)

Tan, CheeFai and Alkahari, M.R. and Liew, S.M. and Said, M.R. and Ranjit, S.S.S. and Kher, V.K. (2012) Ground Vehicle for Fire Fighting Purpose in Hazardous Environment. In: Seminar Hasil Penyelidikan KPT, AKEPT.

Taufik, Haryoni and Siti Umi Hani, Mohamed and Sivarao, Subramonian and Tajul Ariffin, Abdullah (2010) Design and Analysis of Long Cylindrical Workpiece Fixtures. In: The 2 nd International Conference on Engineering and ICT, 18th-20th February 2010, Melaka.

Taufik, , and Ong, Chee Shen and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2009) Design and Analysis of Multi LED Machine Fixture. In: International conference on Applications and Design in Mechanical (ICADME ‘09), 11-13 October 2009, Penang, Malaysia.

Taufik, , and Shajahan, Maidin and Sivarao, Subramonian (2008) DESIGN RULES OPTIMIZATION IN DESIGNING OF SHEET METAL PART. In: REACH'07, 18 - 20 January 2008, Kuala Lumpur.

Taufik, , and Sulaiman, S and Abdullah, T.A. and Sivarao, Subramonian (2009) DESIGN AND SIMULATION ON CAST METAL MATRIX COMPOSITE BY INVESTMENT CASTING. In: The International Conference on Advances in Materials and Processing Technologies , 26-29 October 2009, Kuala Lumpur, Malaysia.

Taufik, , and Sulaiman, S and Abdullah, T.A. and Sivarao, Subramonian (2009) DESIGN AND SIMULATION ON COMPRESOR METAL MATRIX COMPOSITE BY INVESTMENT CASTING. In: The International Conference on Advances in Materials and Processing Technologies (AMPT ‘09), 26-29 October 2009, Kuala Lumpur, Malaysia.

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Abd Rashid, Mohd Warikh and Hng, May Ting and Lee, Cher Chia (2012) Microstructural studies of Cu-Al Intermetallic Compound at Thermosonic Wire Bonding Interface. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15-16 October 2012, Hotel Equatorial, Melaka.

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Hng, May Ting and Lee, Cher Chia (2012) X-ray Diffraction Study of Intermetallic Cu-Al Interconnection in Electronic Components. In: International Conference of Young Researchers on Advanced Materials, July 1 - 6, 2012, MATRIX Building< National University of Singapore (NUS), Singapore. (Unpublished)

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Hng, May Ting and Lee, Cher Chia (2012) XRD analysis of Cu-Al interconnect intermetallic compound in an annealed micro-chip. In: International Conference on X-Rays & Related Techniques in Research & Industry , 3-5 July 2012, Vistana Hotel, Penang.

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Jalar, Azman (2013) Micro-structural studies of thermosonic Cu-Al bonding interface. In: Joint International Conference on Nanoscience, Engineering and Management, 19-21 August 2013, Penang. (In Press)

Wasim, Muhammad Abbas and Yahaya, Saifudin Hafiz and Jamal, Ena and Abd Majid, Ahmad and Md. Ali, Jamaludin (2011) Spur gear tooth design and transition curve as a spiral using cubic trigonometric Bezier function. In: 2011 Eighth International Conference Computer Graphics, Imaging and Visualization, 17-19 August 2011, Singapore.

YAAKOB, MOHD YUHAZRI (2012) A PRELIMINARY NOVEL STUDY ON THE GRAVITY EFFECTS OF CURING OR DRYING ANGLE ON LAMINATED COMPOSITE STRUCTURE. In: 5TH INTERNATIONAL CONFERENCE ON POSTGRADUATE EDUCATION, 18-19 DECEMBER 2012, UTM SKUDAI.

Yusof, Ahmad Anas and Hassan, Mohd Zamri (2006) Portable Vehicular Electro-Hydraulic Jack. In: Science & Its Application in Industry (SSASI 2006) Volume 2 , 2006, -. (Submitted)

Zainal Abidin , N.F and Salleh, M.S. and Minhat, M and Arep, H (2011) STEP-NC Controller ̶ Testing and Commissioning for Open Architecture Control System. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Zainoddin, Muhamad Hafiy Syazwan and Chong, Shin Horng and Yahya, Abu Bakar (2014) sEMG features extraction for back muscle impairment. In: 2014 IEEE EMBS INTERNATIONAL STUDENT CONFERENCE, June 5, 2014, Universiti Putra Malaysia.

Zakaria, Nazri Huzaimi and Mohamad Zin, Mohd Rody and Abdul Munir, Fudhail (2012) 2D Turbulance Simulation On Forward-Backward Facing Step. In: 3rd International Conference on Engineering and ICT (ICEI2012), 4-6 April 2012, Mahkota Hotel, Melaka . (Submitted)

Zakaria, Shahrudin and Khamis, Noorli and Abd. Razak, Norazlina and Sabikan, Sulaiman and Mohamed, Azizan and Karpayah, Puvendran (2008) Omni Directional Indoor Mobile Robot. In: DECON 2008 - National Conference of Design and Concurrent Engineering, 28-29 October 2008, Universiti Teknikal Malaysia Melaka. (Submitted)

Zhibin, Yu and Mohd Saat, Fatimah Al Zahrah and Jaworski, Artur (2011) EXPERIMENTAL TESTING OF THE FLOW RESISTANCE AND THERMAL CONDUCTIVITY OF POROUS MATERIALS FOR REGENERATORS. In: The 23rd IIR International Congress of Refrigeration, 21-26 August 2011, Prague, Czech Republic.

Zuber Ahmadi, Muhd Zharif Rifqi and Jidin, Auzani and Mohamad Sapiee, Mohd Razali and Othman, Md Nazri and P.Nagarajan, Ravin Nair and Jopri, M.H (2013) Digital Implementation of Direct Torque Control of Induction Machines. In: IEEE International Power Engineering and Optimization Conference 2013 (PEOCO 2013), 3-4 June 2013, Langkawi, Malaysia.

Zulfattah, Z. M and Rafeq, Saleman Abdul and Shukri, Z. M. and Ridhwan, J. and Hanafi, M. H. M and Norain, I and Huzaimi, Z. N. and Najib, A. M. (2013) Gnielinski method in calculating the heat transfer coefficient for metallic solar tower absorber. In: The Malaysian International Tribology Conference 2013, MITC2013, 18 - 20 NOVEMBER 2013, KOTA KINABALU, SABAH. (Unpublished)

syed mohamed, muhammad syafiq (2011) Ergonomics Assessment Of Tin Snips. In: 5th PSU-UNS International Conference on engineering and technology (ICET-2011) , 2-3 May, Phucket, Thailand. (Submitted)

tamaldin, noreffendy and Abdollah, Mohd Fadzli bin (2012) Proposal for hybrid passive cooling system of batteries In the electric car. In: The 3rd International Conference on Engineering and ICT 2012 (ICEI2012), 4 - 6 April 2012, Melaka.

Book

Mohd Rosli, Mohd Afzanizam, ed. (2024) Renewable energy system and technology. Penerbit UTeM Press, Durian Tunggal, Melaka.

Abdul , Kadir (2015) From Zero To A Pro Arduino. Andi Yogyakarta, Yogyakarta. ISBN 9789792951189

Abdullah, Mohd Azman and Mat, Shafizal and Shamsudin, Shamsul Anuar and Yob, Mohd Shukri (2023) Mechanical design. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792765

Bani Hashim, Ahmad Yusairi (2023) Contemporary robotics with classical kinematic modeling. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792734

Hussein, Nur Izan Syahriah and Md Ali, Mohd Amran and Sivarao, Subramonian (2012) Effect of CNC Ball Nose End Milling Process Parameters on Surface Roughness and Chip Length of Aluminium Alloy 6061. Universiti Teknikal Malaysia Melaka, pp. 1-3. ISBN 978-967-0257-16-7

Marjom, Zolkarnain and Attan, Hassan (2011) ENGINEERING GRAPHICS & CADD. NA. (Submitted)

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Ruslan, Mohd Hafidz and Sopian, Kamaruzzaman (2013) Parametric Study on Water Based Photovoltaic Thermal Collector. WSEAS Press. ISBN 978-1-61804-175-3

Raja, Izamshah and Abu Bakar, Mohd Hadzley and Mohd , amran and Sivarao, Subramonian (2012) Effects of End Mill Clearance Angle on Surface Error for Machining Low Rigidity Aerospace Structure Component. Universiti Teknikal Malaysia Melaka, pp. 308-312.

Rau, Vimal and Ahmad, Fauzi and Hassan, Muhammad Zahir and Hudha, Khisbullah (2012) Identification of Intelligent Controls in Developing Anti-Lock Braking System. Proceedings of International Conference on Design and Concurrent Engineering 2012 October 15 – 16 Hotel Equatorial Melaka Malaysia . Universiti Teknikal Malaysia Melaka, Malaysia.

Shamsudin, Shamsul Anuar and Abd Samad, Md Fahmi and Abdollah, Mohd Fadzli and Abdullah, Mohd Azman (2023) Mechanics of machines. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792772

Shetty, Devdas and Tamaldin, Noreffendy and Campana, Claudio and Kondo, Jun (2004) E-Manufacturing: Business Paradigms And Supporting Technologies: 18th International Conference On Cad/Cam, Robotics, And Factories Of The Future (Cars & Fof), July 2004. Kluwer Academic Publishers Norwell, MA, USA ©2004 , Norwell, MA USA. ISBN 1402076541

Sivarao, Subramonian and Mohd Shukor, Salleh and T. Joseph, Sahaya Anand and Syamimi , Samsudin and Ian Peter, Hasoloan Haery (2011) A Compilation Of Various Research In Manufacturing Engineering Part 1. Penerbit Universiti Teknikal Malaysia Melaka, pp. 1-178.

Sivarao, Subramonian (2010) Characterization Of Calcium Carbonate Particulated Polyethylene. LA Publishing, Germany. ISBN 978-3-8433-8630-2

Sivarao, Subramonian (2010) Modeling of Laser Materials Processing by Artificial Neural Network Modeling and Experimental Validation. VDM Publishing, Mauritius. ISBN 978-3-639-31529-5

Sivarao, Subramonian (2010) Quality and Performance Analysis of CO2 Laser machining - A Complete Guide For Laser Machining Experimentation and Cut Edge Quality Evaluation. LA Publishing. ISBN 978-3-8433-8162-8

Sivarao, Subramonian (2010) Tire Inflation Technology; Existing and Evolution To Be Advancements in Tyre Inflating Technology. LA Publishing, Germany. ISBN 978-3-8383-8502-0

T., Joseph Sahaya Anand (2011) INTERMETALLIC NICKEL ALUMINIDES BEING AN ALTERNATIVE FOR AUTOMOTIVE BODY APPLICATIONS. Lambert Academic Publisher (LAP), Germany. ISBN 987-3-8443-9835-9

T. , Joseph Sahaya Anand (2011) Can Nickel replace Steel in Automotive Industry? An Overview. Lambert Academic Publisher (LAP), Germany. ISBN 987-3-8465-5475-3

Taufik, , and Aman, Shah and Abdullah, T.A. and Sivarao, Subramonian (2010) Design Rules for Sheet Metalworking Based on Design for Manufacture (DFM) Methodology. Universiti Teknikal Malaysia Melaka, pp. 219-223.

Zakaria, Muhammad Zulfattah (2013) Development of Flexible Mirror Holder For cCXRS Diagnostics for ITER. Lambert Academic Publisher, Saarburuecken, Germany. ISBN 978-3-659-42569-1

Zakaria, Muhammad Zulfattah (2013) Development of Flexible Mirror Mounts for cCXRS Diagnostics for ITER: Design, Calculation and Simulation of Flexures. Lambert Academic Publisher, Saarbruecken, Germany. ISBN 978-3659425691

Thesis

Al-Kaiali, Suhaib Salam Muhammed Ahmed (2017) Impacts power flow and quality of penetrating 50MW wind plant into stand alone grid. Masters thesis, Universiti Teknikal Malaysia Melaka.

A. Hamid, Husna (2017) Physiochemical evaluation and tribological properties of eco-friendly biodegradable novel biolubricant from banana peel wastes. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

A.Rahman, Khairul Anuar (2014) Developing a meso-scale non-contact measuring method based on vision system : calibration of CCD camera. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aaron, Yu Lung (2017) Optimisation of milling parameter and annealing condition for machining polyetheretherketones (PEEK) biomaterials implant. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab Ghani, Mohd Khairul Nizam (2017) Evaluation On Machining Performance Of AISI 1045 Steel Under Dry Condition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abas, Noor Affandy (2020) Development Of Arduino System For Cylinder Deactivation Strategy In Perodua Myvi Sxi K3-Ve Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abbas, Adnan Jameel (2016) Predictive modelling of machining parameters of S45C mild steel. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abd Aziz, Syazxerlin (2018) Prediction Of Tool Wear Characteristics In Turning On Inconel 718 : Experimentation And Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahman, Asrul (2016) Development Of Controller For Prosthetic Leg Using PID Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahman, Azira (2020) Predictive Functional Control With Reduced-Order Observer Design Using Particle Swarm Optimization For Pneumatic System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd. Rasid, Muhamad Firdauz (2021) Multi objective performances optimization of hybrid rotary ultrasonic assisted micro drilling on chemically strengthened glass. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Khalim, Abdul Zuhair (2020) Artificial Neural Network Modelling To Predict Laser Micro Grooving Quality Of Commercially Pure Titanium Grade 2. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Manap, Muhamad Naim Fahmi (2021) Effect of zirconia and chromia on the mechanical and tribology properties of alumina cutting tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Mohd Aidil Shah (2019) Characterization and Parametric Evaluation of Wire Electrical Discharge Machining of Cold Work Tool Steels. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Mohd Isa (2019) Optimization Of Drilling Parameter For Carbon Fiber Reinforced Polymer CFRP Material Using RSM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Nurul Hafizah (2015) Parameter study of hopping mechanism for one legged crank-type hopping robot. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rashid, Nur Saidatul Fatimah (2017) Friction and wear characteristics of bio-lubricant enhanced with hBN and PKAC additives. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Razak, Muhammad Raziman (2017) Effect Of Carbon Additives And Surfactant On Electrical Discharge Machining (EDM) Of Reaction-Bonded Silicon Carbide (RB-SiC). Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Abd Halimnizam (2019) Surface Roughness Study On Mild Steel In Conventional Turning Process Under Three Condition Cutting Fluids. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Ahmad Shafawi (2019) Computational Fluid Dynamics Study Of Bio-Mimetic Wind Turbine For Energy Harvesting Using OpenFOAM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Herryanni (2018) Designing a home fertigation system using coco peat. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Lokman (2014) A new control strategy for cutting force disturbance compensation for XY table ball screw driven system. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Muhammad Ilman Hakimi Chua (2016) Optimization Of Boron-Based Nanolubricant For Diesel Engine. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Muhammad Faizal (2019) Tribology Characteristics Of 22MNB5 Boron Steel Coated With Titanium Aluminum Nitrade. Masters thesis, Universiti Teknikal Malaysia Melaka.

Adam, Abdul Aziz (2014) Fabrication and characteristic study of alumina tool using cold isotatic press. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Nizam, Jamaludin (2014) Conceptual Design Of Wind Accelerating Device For Small VAWT. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Sohan, Muhammad Hafiz (2014) The effect of load distribution towards the line following performance of two wheel driven mobile robot. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmed Al-Mhiqani, Mohammed Nasser (2015) Threat analysis for cyber physical system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ajmi, Ahmed Ali (2016) Study And Analysis The Impact Of Temperature In Turbine Room On The Performance Of Workers In Power Station. Masters thesis, Universiti Teknikal Malaysia Melaka.

Akin, Aisyah Gwynnie Chembat (2016) Energy analysis for lighting system in academic building - case study in IKM Bintulu. Masters thesis, Universiti Teknikal Malaysia Melaka.

Albadarneh, Mousa Jamal Salem (2021) Energy efficiency in academic buildings through optimization and operational strategies. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alhammali, Abdalraouf Abdulsalam Musod (2019) Energy Audit And Improvement In The Human Development And Language Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alhayali, Zaid Ahmed Muhsen (2013) Implementation of renewable energy concept in the automotive in Malaysia An exploratory study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali Al-Baiti, Mohammed Hasan (2019) Influence Of Machining Parameters On Surface Roughness And Quality Of Hole In Drilling Of CFRP Composites With Ultrasonic Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali@Yusof, Ahmad Nazrin (2017) Energy simulation analysis for lighting in an academic building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alias, Mohd Fairuz (2022) Analyzing the effect of parameter setting on surface roughness of turning process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alkhanbashi, Maged Abdullah Ahmed (2019) Improvement Of Self Alignment Footing System For Motor-Pump Rotating Shaft. Masters thesis, Universiti Teknikal Malaysia Melaka.

Amir, Alifh Omar (2016) Two Stroke Swivel Motion Engine Simulation Using Lotus Engine Software. Masters thesis, Universiti Teknikal Malaysia Melaka.

Amirudin, Nurul Azyan (2014) Concept development of ejector jig and fixture for dipping process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Anang, Nur Amira (2018) Design Of Cascade NP/PI Controller For Cutting Force Compensation Of Ball Screw Driven System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arifin, Khairil Anwar (2021) Investigation of energy management practice and achievement in UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azahar, Arman Hadi (2015) Vertical motion control of a one legged hopping robot. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhar, Anis Afuza (2019) Surface Integrity And Tool Wear Of Hardened HTCS-150 Steel (52 HRC) In Milling With Tia1n Coated Carbide. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azizi, Muhammad Azizul Raziq (2023) PID-PSO DC motor position controller design for ankle rehabilitation system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bahar, Mohd Bazli (2014) Design and development of sit-to-stand trajectory and control of humanoid robot. Masters thesis, Universiti Teknikal Malaysia Melaka.

Boey, Kok Hoong (2020) An approach to burr free precision metal stamping. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Chai, Mau Shern (2021) Parameter tuning of sliding mode controller using multi-objective particle swarm optimization in electro-hydraulic actuator system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Cheok, Yong Seng (2014) Fuzzy logic controlled SPMSM drives for long cable applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chong, Chee Soon (2017) PSO-tuned pid sliding surface of sliding mode control for an electro-hydraulic actuator system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dahlan, Mohd Shazwan (2019) Surface roughness study on aluminium in high speed turning process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Farah,, Nabil Salem Yahya (2019) Self-Tuning Fuzzy Logic Speed Control Of Induction Motor Drives. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gan, Chin Ket (2021) Prediction of tool wear and surface roughness of waspaloy by using Artificial Neural Network (ANN). Masters thesis, Universiti Teknikal Malaysia Melaka.

Ganesan, Hema Nanthini (2018) Optimization of dimple configurations on heat dissipation of aluminium flat surface. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ghani, Muhamad Fadli (2023) Optimized fuzzy logic sliding mode control with proportional-integral-derivative for an electrohydraulic actuator system. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ghazali, Mohd Zaki (2018) Maximum Torque Estimation Technique Of Three Link System For Sit To Stand Motion. Masters thesis, UTeM.

Gheidan, Abdelgader Agilah Saleh (2017) Investigation of effects of combustor wall thickness on the flame stabilization limits for micro combustors with wire mesh. Masters thesis, Universiti Teknikal Malaysia Melaka.

Goh, Jee Boon (2020) Design and development of horizontal axis wind blade in regenerative energy system for cooling tower. Masters thesis, Universiti Teknikal Malaysia Melaka.

Haji Maharof, Madihah (2021) A state observer-based tracking controller for suppression of input disturbance in machine tools application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hamdi Hussein, El Grour (2013) Comparative study for material removal rate, surface finish and electrode wear rate on die sinking edm. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hanizam , Hashim (2013) Effect of in SITU DC and PDC substrate bias cleaning process on TiN coating adhesion in PVD system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Haris, Sharil Izwan (2016) Position Tracking Control Of Slider Crank Mechanism Using Fuzzy PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Harun, Mohamad Haniff (2013) A three dimensional (3D) vision based defect inspection system for gluing application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hasbulah, Muhammad Haziq (2021) Implementation of EEG controlled technology to modular self-reconfigurable robot with multiple configurations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hasbullah, Nurjannah (2022) Investigation of one-directional and bi-directional flows across staggered tube banks heat exchanger. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hee, Wai Keat (2016) Design And Analysis On The Robust Control Of A X-Y Ballscrew Mechanism. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Abdullahi Abdulrazak (2020) Study of performance of nickle quarry dust composite coated cutting tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Maziah (2019) Friction improvement of palm kernel activated carbon-epoxy by oil and water impregnation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Muhamad Zamani (2022) Self-tuning fuzzy logic speed controller based on model reference adaptive control for induction motor drive. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Riduan (2020) Optimization on milling machining performances of AISI D2 steel using Taguchi method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jaafar, Mohd Fairuz (2021) Optimization of customized drill reamer geometrical features for aerospace composite panel. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Jaafar, Noor Azam (2013) Effect of wire-EDM parameters on machining characteristics of titanium alloy (Ti6AI4V) using Taguchi method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamaluddin, Nurezzaty (2020) Backside Chipping Improvement Of Non-Backcoated Bare Die Device For Mobile Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamaludin, Jailani (2015) Disturbance Rejection Using Disturbance Force Observer For XYZ Positioning Table. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jonid, Izyan Dayana (2019) Electrical Discharge Machining Of Titanium Alloy (Ti-6al-4v) Using Various Types Of Electrodes. Masters thesis, Universiti Teknikal Malaysia Melaka.

Juhari, Khairul Anuar (2014) Development of mobile robot and localization system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jumali, Muhammad Syafik (2016) The Influence Of Tool Geometry Towards Cutting Performance On Aluminium 7075. Masters thesis, Universiti Teknikal Malaysia Melaka.

Juwara, Luqman Nul Hakim (2016) The effect of cutting parameter, surface integrity and tool wear on AISI D2 tool steel in dry milling process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kasim Hawari, Mohd Zarifitri (2023) Optimization of mobile robot path planning in semi-dynamic environment using genetic algorithm. Masters thesis, Universiti Teknikal Malaysia Melaka.

Keek,, Joe Siang (2019) Path Tracking Control Of Mecanum−Wheeled Robot With Output−Scheduled Fractional−Order Proportional−Integral Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khuzaimi, Mohd Aris (2014) Comparison of machinability aluminium alloy LM6 when using coated and uncoated carbide cutting tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kunyahamu, Siti Nur Syazwani (2021) Performance analysis of pre-sliding motion using sliding mode controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kursus, Maisarah (2022) The effect on usage of quarry dust suspension as coolant in drilling of titanium alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Liaw, Geok Pheng (2016) Temperature Control And Investigation Of Parabolic Dish Based Concentrating Solar Power (CSP) In Malaysia Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Kee Keong (2021) Implementation of performance monitoring for bag filter dust collecctor machine at animal feedmill plant. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Victor Abraham Su Kang (2019) Design Of A Control System For A Reconfigurable Conveyor System Using PLC. Masters thesis, Universiti Teknikal Malaysia Melaka.

Liou, Jacqueline Jing Wen (2020) Experimental Investigation Of Mechanical Dicing Parameters On The Quality Of Thin Glass Wafer Cutting Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ludan, Shamila Sandhu (2016) Solar Thermal Water Heater Requirements For Typical Malaysian House. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mamat, Normaisharah (2015) Modelling of suspension and motoring force for bearingless permanent magnet synchronous motor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Manaf, Fakhir Hussain (2017) Thermal comfort and energy consumption analysis for engineering laboratory building in UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Manaf, Norshahidah (2019) Multi Objective Performances Optimization Of Poly-Ether-Ether-Ketone (PEEK) Material By Using Rotary Ultrasonic Assisted Drilling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mansoor, Mohd Sufriansyah (2019) Effect Of Lathe Machining Parameters On Machining Characteristics Towards Mild Steel (AISI 1020) Using RSM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mansor, Nuratiqa Natrah (2019) Force And Position Based Haptic Bilateral Control System For Single Joint Robotic Arms. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mastuki, Ammar Aizat (2019) Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat, Siti Asiyah (2021) Performance of carbide insert in turning of titanium alloy under carbon dioxide cryogenic cooling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Amin, Mohd Imran (2018) Fabricate And Investigate The Performance Of Alumina Based Ceramic Cutting Tool With Different Edge. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Seman., Norhidayah (2019) Integration Of G-Code With Position Controller Via Interpreter Design Using MATLAB For Milling Machine Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Tahir, Noor Ayuma (2020) Tribological Performance Of Graphene Synthesised From Solid Waste Products As Carbon Sources. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mazda, Nur Syahirah (2018) Wear performance of alumina based cutting tool when machined with AISI 1045 carbon steel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Alias, Muhammad Aizat (2021) Lubrication and tribological properties of palm oil mixed with organo zinc compound. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Jasman, Md Eirfan Safwan (2018) Experimental Investigation On Tribological Properties Of Natural Oil-Based Lubricants As Sustainable Bio-Lubricants. Masters thesis, UTeM.

Md Nasir, Nur Syuhada (2021) Parameters optimization of micro drilling process for CFRP using two flute solid carbide drill bit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Nor, Nur Umairah (2020) The Effect Of Geometry Configuration On Flame Stabilization In Micro Combustor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Radzai, Fatimah (2012) Characterization study of silver titanium dioxide (AgTiO2) thin film deposited on various substrates via sol-gel technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Shariff, Mohd Rezykin (2019) Design Of Mobile Robot In Agriculture, Development And Analysis Of Mobile Robot Body Frame Structure Against Applied Load. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Nor Rizan (2019) A Conceptual Framework Of Reconfigurable Conveyor System To Support Changeability In Manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Azmi, Helmi Affendi (2019) Development Of Simultaneous Twin Cutter For Machining Thin-Wall Component. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Isa, Kamarul Syaffiq (2018) Reduction Of Energy Consumption In Articulated Robot. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Khairi, Nurul Nadirah (2017) Improved fuzzy-pid controller in following complicated path for lego mindstorms NXT. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Murad, Nor Syaza Farhana (2018) Variable Speed Control Of Two-Mass Wind Turbine System Via State Feedback With Adaptation Law. Masters thesis, UTeM.

Mohamad Yuden, Mohamad Adzeem (2018) Optimal design and positioning control performance of a 2-DOF robotic finger. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamed Noor, Ahamad Zaki (2015) Conceptual Design Of Reverse And Jaw Detector Jig. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Hayder Salah (2021) Modelling Of Malaysian Reference Networks For Photovoltaic And Battery Energy Storage Systems Integration Studies. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Karam Khairullah (2018) Performance comparision of self-tuning PID controller for controlling the speed of a DC motor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Marwan Qaid Abdulrazzaq (2018) High accuracy walking motion trajectory generation profile based on 6-5-6-PSPB polynomial segment with polynomial blend. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed Aldabas, Sari Abdo Ali (2019) Torque Scaling Of Bilateral Control Master-Slave System For External Loads. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed Muslem, Mohammed Bakar (2019) Experimental Studies On Effect Of Process Parameters On Tool Wear In Drilling CFRP Composites With Ultrasonic Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohan, Ahmed Esmael (2016) Laboratory-Scale And Real Experimental Study On The Performance Of Energy Regenerative Suspension System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ali, Noorfa Idayu (2018) Multi-respone injection moulding process parameters optimization using Taguchi method with grey relational analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Amin, Nur Huda (2014) Modelling and control of inverted pendulum on the rotating disc. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Aziri, Muhammad Hasif (2020) Speed Performance Improvement Of Three-Phase Induction Motor Drives Using Adaptive Sliding Mode Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Hafiz, Taib (2014) Design and development of mobile robot thematic mapping using flexible ellipse shape region. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Halim, Nurhaliana Shazwani (2022) Influence of laser cutting parameters on the cutting quality of inconel 718. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Mokhtar, Nur Salma (2023) PID controller with Kalman filter design for quadcopter DJI F450 system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Faarih Farhan (2017) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Haslinah (2015) Low voltage amplification using self starting voltage regulator for storage system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Mohd Zulfadly (2019) Conceptual Retrofit Design Of Sustainable Energy Management System For Office Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nawawi, Nurul Husna (2016) Optimisation of cutter geometrical feature for machining orthopedic, trauma and spinal biomaterials implant. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nor, Rozilawati (2015) Practical positioning control of a one mass rotary system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rais, Nurul Ashikin (2022) Development of Ultra Z-Blade turbine for pico-hydro system for low head low flow water resources. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rashid, Mohd Fairuz (2021) Machining performance of 22MnB5 Boron steel cutting tool with Al 6061 Aluminium Alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Samsuddin, Noorazizi (2017) Optimization of drill geometry design for orthopedic surgical application in dry drilling condition. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shaharudin, Nabilah (2019) Load Frequency Control Using Augmentation PI-LQR Controller For A Two-Area Hydropower System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zainal, Muhammad Iktisyam (2018) Single input fuzzy logic controller for yaw control of underwater remotely operated crawler. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zakaria, Muhammad Akmal (2015) Parameter study of hopping mechanism for one legged crank-type hopping robot. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zakaria, Muhammad Akmal (2023) Performance evaluation of ultrasonic assisted wire electrical discharge turning for TI-6AL-4V material. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mokhtar, Muhammad Faiz (2020) Characterization And Wear Performance Of Fabricated Alumina Based Cutting Tools. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muazzam Zainudin, Muhammad Ikhwan (2021) Investigation of factors affecting flame stabilization in meso-scale combustor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Kamal Aysraf, Pubin (2016) Surface roughness study on mild steel in high speed turning process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustafa, Ahmad Khusaire (2018) Numerical Investigation Of Flow And Heat Transfer In Microchannel. Masters thesis, UTeM.

Mustapa, Muhammad Zaki (2016) Proportional Integral Derivative Based Control For Autonoumous Vertical Take Off And Landing Of Quadcopter System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nabilah, Mohd Safar (2010) Optimum Cycle Time Based On Jig And Workstation Design Combinations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Najem, Ibrahim Hamad Mohamed (2018) Analysis Of Energy Usage In Pusat Persatuan Pelajar. Masters thesis, UTeM.

Noordin Saleem, Siti Nur Afifah (2020) Energy Efficiency Study To Reduce Energy Usage In Al-Azim Mosque Melaka. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norashid, Norjannahtul Ainah (2019) Investigation On Tribological Properties Of 3D Printed ABS And Molded ABS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norizan, Muhammad Alif (2017) Relationship investigation of handgrip forces with varied wrist angles using forearm EMG for bionic hand. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Nor Suriyanti (2018) Flexible robot configuration cell in manufacturing industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Muhamad Naim (2017) Multi-Objectives Optimization Of Energy Consumption Of IKM Bintulu Buildings Towards Energy Saving. Masters thesis, Universiti Teknikal Malaysia Melaka.

Othman, Muhammad Azri (2022) New data processing strategy for intelligent CNC machine tool controller using function block technology. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Othman, Syariffah (2022) Modeling and feasibility study of a dish-micro gas turbine system in different regions of Malaysia. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rafan, Nur Aidawaty (2017) Stick Slip Friction Models Control Design Approach For Friction Compensation In Machine Tools Drive System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rahman, Muhamad Hakim (2018) Improvement of vision inspection during tip to tip measurement through parameter optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramli, Azlan (2020) Multi Objective Performance Optimization Of Hybrid Rotary Ultrasonic Assisted End Milling For Machining Hardened Steel Material. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rasid, Farah Amirah (2019) Adaptive Trajectory Generation For Vision-Based Robot Using Negotiation Principle For Rehabilitation Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razak, Muhammad Shahmi (2021) The effect of cryogenic carbon dioxide cooling on surface integrity of titanium alloy in turning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razali, Muhammad Razmi (2016) The Model And Evaluation Of Swaying Arm To The Torso Torque Of Humanoid Robot During Walking. Masters thesis, Universiti Teknikal Malaysia Melaka.

Retas, Zain (2023) Design of nonlinear adaptive interaction algorithm controller for improvement of tracking performance of X-Y table ball screw drive system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rshieh, Malik Raihan (2018) Analysis of energy usage of the library building in UTeM main campus. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sabaruddin, Saiful Akmal (2018) Modelling and simulation of water-based hydraulic hybrid driveline. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sakthi Velu, Vasanthan (2016) Positioning Control Of A 1-DOF Pneumatic Muscle Actuator (PMA) System With Modified PID Plus Feedforward Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salam, Saifullah (2016) Multi Objective Optimization Using Non-Dominated Sorting Approach For Load Frequency Control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salim, Fadzilah (2021) An S-Curve Efficient Frontier For Evaluation Model. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Salim, Nur Anis Suraya (2018) Analysis On The Performance Of The Blade Design For The Wind Turbine System From An Air Conditioner System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salima, Wongani Clement Kizito (2021) Product redesign by topology optimization for additive manufacturing process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salleh, Zulhisyam (2021) Simplified fuzzy logic controller to improve disturbance rejection with space vector in induction motor drives. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Samat, Nurul Basyirah (2016) Energy Audit For Lighting And A/C In Academic Building - Case Study In IKM Bintulu. Masters thesis, Universiti Teknikal Malaysia Melaka.

Seik Heng, Kai (2016) Adaptive simplified fuzzy logic controller of unmanned underwater vehicle for depth and pitch control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sha'abani, Mohd Nurul Al-Hafiz (2014) Hierarchical self organizing map and focusing inspection strategy for mobile robot novelty detection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shaikh Ahmad Hilmy, Shaikh Tahfiq Falahin (2021) Study The Temperature Distribution Of Solar Powered Drying Chamber Using CFD Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shezad, Zaeem (2019) Total Energy Management Of A University Engineering Building Through Audit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shkarah, Ahmed Jassim (2016) Single Phase And Two Phase Flow For Heat Transfer In Micro Channel Heat Sink. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Siti Azirah, Amai (2014) A data-driven prognostic model using time series prediction techniques in maintenance decision making. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Sundi, Syahrul Azwan (2021) Machining Parameters And Tool Geometry Optimization For Trimming Composite Laminates Using Response Surface Methodology. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Suziee, Sukarti (2013) The effect of seawater on the corrosion behavior of natural gas pipelines in Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Syed Mohamad Shazali, Syed Abdul Hamid (2009) Vision Based Multi Sensor Feedback System For Robot System With Intelligent. Masters thesis, UTeM.

Tajry, Mohd Zulhairi (2017) Development Of Cutter Geometrical Feature For Machining Thin Wall Part. Masters thesis, Universiti Teknikal Malaysia Melaka.

Talib Alshammari, Wissam (2012) Real-Time Implementation Of LPC-10 Codec On TMS320C6713 DSP. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tamin, Norfauzi (2020) Development And Performance Analysis Of Alumina-Yttria Stabilized Zirconia-Chromia Cutting Tool For High Wear Performance. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tan, Ming Hui (2016) Enhanced-PID Control Based Antagonistic Control For Pneumatic Artificial Muscle Actuators. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Swee Tiang (2015) Self routing traffic light for traffic light controller using priority method based on volume of vehicles. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tan, Wee Kien (2016) Lean adoption for effective machine's maintenance performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tang, Daphne Hui Zyen (2016) Novel Framework For Automated Appliance Registration In Home Energy Management Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tang, Teng Fong (2015) Design of linear quadratic regulator controller with adjustable gain function for rotary inverted pendulum system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tang, Teng Fong (2019) Positioning Control Of Pneumatic Artificial Muscle Systems Using Improved Nominal Characteristic Trajectory Following Control. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tee,, Siau Ping (2019) Improved Positioning Control Of A Rotary Switched Reluctance Actuator Using Modified PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teo, Boon Guan (2018) Process Parameter Optimization Of Adhesive Dispense Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tsung Heng, Chiew (2014) N-PID controller with feedforward og generalized maxwell-slip and static friction model for for friction compensation in machine tools. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wahid, Siti Zaleha (2017) rHDPE-rPP Hybrid Blends From Injection Molding Scrap : Characterization For Conventional Milling Workpiece Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wai, Chee Mun (2014) Modeling And Analysis Of Composite Hinge For Aircraft Spoiler Using Finite Element Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Md Hatta, Wan Nur 'Izzati (2019) Development Of Automated Coolant Supply (ACS) System In Improving Cutting Performance For CNC Milling Machining. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Mohd Yusoff, Wan Mohd Azahar (2018) Analysis of surface intergrity and tool wear during machining high thermal conductivity steel 150 (HTCS- 150). Masters thesis, Universiti Teknikal Malaysia Melaka.

Yakop, Mohd Halim (2018) Automated System – Application Of AHP And Topsis Analysis For Productivity Improvement. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yap, Kee Sin (2013) Effect of burr formation and surface roughness in surface grinding of XW-42 alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yunus, Yusof (2021) Multi-finger localization feedback through vibrotactile sensory substitution system for prosthetic hand. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yusri, Izzati (2017) Rotary motion characterization of tubular single excitation switched reluctance actuator. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal, Mohd Syafiq (2016) Molding temperature control enhancement for transfer molding process via additional wire heater. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal Abidin, Syazwani (2019) Thermophysical Properties Of CNF-Based Nanocoolant As A Heat Transfer Media. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal Ariffin, Selamat (2009) The Effect Of Synthetic Soluble Cutting Fluid Pressure Towards Machinability Using Stainless Steel 304 With Coated Cemented Carbide Insert. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkifli, Muhammad Winal Zikril (2019) Human-Robot Interaction With Animal Robot PARO For Patients With Depression. Masters thesis, Universiti Teknikal Malaysia Melaka.