Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Article

Abal Abas, Zuraida (2013) Extended Advancing Front Technique for the Initial Triangular Mesh Construction on a Single Coil for Radiative Heat Transfer. Arabian Journal for Science and Engineering. pp. 1-18. ISSN 13198025

Lim, Z.Y. and Putra, Azma and Mohd Nor, Mohd Jailani and Yaakob, Mohd Yuhazri (2017) Sound Absorption Performance Of Natural Kenaf Fibres. Applied Acoustics, 130. pp. 107-114. ISSN 0003-682X

A. Jalil, Intan Ermahani and Shamsuddin, Siti Mariyam and Muda, Azah Kamilah and Azmi, Mohd Sanusi and Ummi Rabaah, Hashim (2018) Predictive Based Hybrid Ranker To Yield Significant Features In Writer Identification. International Journal Of Advances In Soft Computing And Its Applications, 10 (1). pp. 1-23. ISSN 2074-8523

A. P., Puvanasvaran and M. R. , Muhamad (2009) Leanness Achievement through People Development System in Implementing Lean Process Management. American J. of Engineering and Applied Sciences, 2 (1). pp. 105-119. ISSN 1941-7020

A. P., Puvanasvaran and M.R, Muhamad (2008) A Review of Problem Solving Capabilities in Lean Process Management. American Journal of Applied Science, 5 (5). pp. 504-511. ISSN 1546-9239

A. Perumal, Puvanasvaran and M. N. H., Ab. Hamid and Yoong, Sai Sieng (2018) Cycle Time Reduction For Coil Setup Process Through Standard Work: Case Study In Ceramic Industry. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 210-220. ISSN 1819-6608

A.Rahman, Hasimah and Majid, Md.Shah and Jordehi, A.Rezaee and Gan, Chin Kim and Hassan, Mohammad Yusri and O.Fadh, Saeed (2015) Operation And Control Strategies Of Integrated Distributed Energy Resources : A Review. Renewable And Sustainable Energy Reviews, 51 (-). pp. 1412-1420. ISSN -

ABD RAZAK , JEEFFERIE and Mohamad, Noraiham and Ab Maulod, Hairul Effendy (2013) Processability of polypropylene/multiwalled carbon nanotube nanocomposites via direct melt compounding. Journal of Elastomers & Plastics, 45 (3). pp. 239-251. ISSN 0095-2443

Ab Ghani, Ahmad Fuad and Ali, Mohd Basri and Dhar Malingam, Sivakumar and Mahmud, Jamaluddin (2020) Digital Image Correlation (DIC) technique in measuring strain using opensource platform Ncorr. Journal of Advanced Research in Applied Mechanics, 26 (1). pp. 10-21. ISSN 2289-7895

Ab Ghani, Ahmad Fuad and Mahmud , Jamaluddin (2017) Material Characterization Of Hybrid Composite: Experimental Using Strain GAUGE/DIC With Finite Element Modelling Macro/Micro Scalens. Key Engineering Materials, 740 (-). pp. 31-40. ISSN 1662-9795

Ab Ghani, Mohd Ruddin and Nabil, Farah and Mat Lazi, Jurifa and Mohd Amin, Nur Huda and Othman, Syariffah and Jano, Zanariah (2016) Comparative Study Of Different Multilevel Topologies Of Five Level Inverter Using Spwm. International Journal of Applied Engineering Research, 11 (20). pp. 10139-10145. ISSN 0973-4562

Ab Hadi, Nik Azran (2017) Design And Development Of Smart Autonomous Fire Detector Robot. Journal of Engineering and Applied Sciences, 12 (23). pp. 7223-7228. ISSN 1816-949X

Ab Hadi, Nik Azran and Mohd Annuar, Khalil Azha and Saadon, Intan Mastura and Harun, Mohamad Haniff (2015) Design And Construction Of Liquid Level Measurement System. Journal of Advanced Research in Applied Mechanics, 12 (1). pp. 8-15. ISSN 2289-7895

Ab Hadi, Nik Azran and Kadmin, Ahmad Fauzan and A Aziz, Khairul Azha and Abd Rahman, Mohd Soufhwee and Abd Razak, S. S. and Salehan, M. Z. and Abdul Hadi, N. A. and Hamzah, Rostam Affendi and Abd Rashid, Wan Norhisyam (2018) Performance Analysis Of Neural Network Model For Automated Visual Inspection With Robotic Arm Controller System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 19-22. ISSN 2180-1843

Ab Hadi, Nik Azran and Manimaran, Vasantha Kumaran and Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Mohd Ab Halim, Mohd Firdaus and Mohamad Sapiee, Mohd Razali (2018) Development Of Smart Home System Using Arduino With Mobile Application. Journal In Engineering,Sciences And Technology, 1. pp. 1-10. ISSN 2215-0986

Ab Rashid, Mohd Zamzuri and Ahmad Izzuddin, Tarmizi and Abas, Norafizah and Hasim, Norhaslinda and Abd Azis, Fadilah and Mohd Aras, Mohd Shahrieel (2013) Control of Automatic Food Drive-Through System using Programmable Logic Controller (PLC). International Journal of u- and e- Service, Science and Technology, 6 (4). pp. 41-50. ISSN 2005-4246

Ab Rashid, Siti Rosmaniza and Ismail, Mahamod (2011) Development of A Secured Database Access on Application Server. International Journal of Research and Reviews in Information Security and Privacy (IJRRISP), 1 (3). pp. 39-41. ISSN 2046-5718

Abal Abas, Zuraida and Salleh, Shaharuddin and Ilias, Shazwani and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad and Mohd Aboobaider, Burhanuddin and Sidek, Safiah (2014) An insight into the science of unstructured meshes in computer numerical simulation. Applied Mathematical Sciences. 8493 -8516. ISSN 1312-885X

Abal Abas, Zuraida and Salleh, Shaharuddin and Rahman, Ahmad Fadzli Nizam and Basiron, Halizah and Hasan Basari, Abd Samad and Hassim, Nurulhalim (2013) Improvement of element creation procedure for generating initial triangular unstructured mesh for radiative heat transfer modelling. International Review on Modelling and Simulations, 6 (5). pp. 1649-1656. ISSN 1974-9821

Abas, Norafizah and Ab. Rashid , Mohd Zamzuri and Ibrahim, Zulkifilie and Samsudin, Nur hazahsha (2013) Design of Auto-stabilization Control Technique for a Quadrotor System. Design of Auto-stabilization Control Technique for a Quadrotor System, Vols. . pp. 559-564. ISSN AMM.313-314.559

Abas, Norafizah and Ibrahim, Zulkifilie and Rahim, Nor Hidayah and M. Kassim, Anuar (2013) Modeling and System Identification using Extended Kalman Filter for a Quadrotor System. Modeling and System Identification using Extended Kalman Filter for a. pp. 976-981. ISSN AMM.313-314.976

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yusainee, Syed Yahya (2015) Detection of tube defect using the autoregressive algorithm. Steel and Composite Structures, 19. pp. 131-152. ISSN 1598-6233

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusainee (2015) Vibration Impact Acoustic Emission Technique For Identification And Analysis Of Defects In Carbon Steel Tubes: Part A Statistical Analysis. Journal of Mechanical Science and Technology, 29. pp. 1547-1557. ISSN 1976-3824

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusainee (2015) Vibration Impact Acoustic Emission Technique For Identification And Analysis Of Defects In Carbon Steel Tubes: Part B Cluster Analysis. Journal of Mechanical Science and Technology, 29. pp. 1559-1570. ISSN 1976-3824

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yusainee, Syed Yahya (2015) Pattern Recognition Approach Of Stress Wave Propagation In Carbon Steel Tubes For Defect Detection. International Journal of Computer Theory and Engineering, 7. pp. 139-144. ISSN 1793-8201

Abd Khair, Fazlin and Putra, Azma and Mohd Nor, Mohd Jailani and Mohd Lazim, Nurul Atiqah and Selamat, Mohd Zulkefli (2014) Preliminary Study On Bamboo As Sound Absorber. Applied Mechanics and Materials, 554 (-). pp. 76-80. ISSN 1660-9336

Abd Rashid, Kamarul Ariffin and Husain, Mohd Nor and Othman, Abdul Rani and Abd Aziz, Mohamad Zoinol Abidin and Saad, M.M and Senon , M. and Ahmad , M. T. and Hamidon, J. Sam (2014) Design Of Linear Polarization Antenna For Wireless MIMO Application. ARPN Journal Of Engineering And Applied Sciences, 9 (7). pp. 1026-1030. ISSN 1819-6608

Abd Razak, Jeefferie and Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub, Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile Surface Modification Of Graphene Nanoplatelets (GNPS) Using Covalent ATPS-Dehydration (GNPS-ATPS) And Non-Covalent Polyetherimide Adsorption (GNPS-PEI) Method. APPLIED MECHANICS AND MATERIALS, 761 (-). pp. 391-396. ISSN -

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam Dr, Chantara Thevy A/P and Mahamood, Mazlin Aida and Lau, Kok Tee and Ab Maulod, Hairul Effendy and Munawar, Rose Farahiyan and Mohamad, Noraiham (2014) Non-Covalent Polymeric Wrapping Of Igepal C0890 Fo Graphene Nanoplatelets (Gnps-C0890) Filled Nr/Epdm Rubber Blend Nanocomposites. Applied Mechanics and Materials, 761. pp. 385-390. ISSN 1660-9336

Abd Razak, Jeefferie and Noor, N. A.M. and Ismail, Syahriza and Mohamad, Noraiham and Lau, Kok Tee and Munawar, Rose Farahiyan and Junid, Ramli (2018) Review On Carbon Nanotube Based Polymer Composites And Its Applications. Journal of Advanced Manufacturing Technology, 12 (1(1)). 311 - 326. ISSN 1985-3157

Abd Samad, Md Fahmi (2011) Deterministic Mutation-Based Algorithm for Model Structure Selection in Discrete-Time System Identification. International Journal of Intelligent Control and Systems, 16 (3). pp. 182-190. ISSN 02187965

Abd Samad, Md Fahmi (2007) Optimum grouping in a modified genetic algorithm for discrete-time, non-linear system identification. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING, 221 (7). pp. 975-989. ISSN 0959-6518

Abd Samad, Md Fahmi and Hishamuddin, Jamaluddin and Robiah, Ahmad and Mohd Shafiek, Yaacob and Abul K. M., Azad (2013) Effect of Penalty Function Parameter in Objective Function of System Identification. International Journal of Automotive and Mechanical Engineering (IJAME), 7. pp. 940-954. ISSN 2180-1606

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Comparison Of Information Criterion On Identification Of Discrete-Time Dynamic System. Journal of Engineering and Applied Sciences, 12 (1 SI). pp. 5660-5665. ISSN 1816-949X

Abdul Latiff, Anas and Kadir, N.A and Ismail, E.I. and Shamsuddin, H. and Ahmad, H. and Harun, S.W. (2017) All-Fiber Dual-Wavelength Q-Switched And Mode-Locked EDFL By SMF-THDF-SMF Structure As A Saturable Absorber. Optics Communications, 389 (-). pp. 29-34. ISSN -

Abdul Latiff, Anas and M. Rusdi, M. F. and Hisyam, M. B. and Ahmad, H. and Harun, S. W. (2017) A Generation Of 2 Um Q-Switched Thulium-Doped Fibre Laser Based On Anatase Titanium (IV) Oxide Film Saturable Absorber. Journal Of Modern Optics, 64 (2). pp. 187-189. ISSN 0950-0340

Abdul Munir, Fudhail and Sukri, Muhammad Izzat Syazwan and Syahrial, Fadhli and Roseli, Adnan and Dhar Malingam, Sivakumar and Hassan, Muhammad Zahir (2017) Design of engine mounting for single seated educational racing vehicle. ARPN Journal of Engineering and Applied Sciences, 12 (24). pp. 7348-7351. ISSN 1819-6608

Abdul Rahman, Azrul Azwan and Mohamad, Nor Rizan (2016) Software-In-The-Loop Technique: An Approach To Support Reconfiguration Of Manufacturing System. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9789-9795. ISSN 1819-6608

Abdul Rahman, Azrul Azwan and Seliger, Günther (2013) Integrated control system simulation for supporting changes of routing strategy in an automated material flow system. Procedia CIRP. pp. 407-412. ISSN 2212-8271

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and M.Y, YUHAZRI (2012) Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system. Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system , 229-231. pp. 750-755. ISSN 16609336

Abdullah, Rohana and Abd Rahman, Md Nizam and Khalil, S.N. (2014) Human System Modeling for Optimum Labor Utilization and Man-Machine Configuration. International Journal of Engineering & Technology IJET / IJENS, 14 (1). pp. 75-79. ISSN 2077-1185

Abdullah, Lokman and Jamaludin, Zamberi and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY and syed mohamed, muhammad syafiq (2012) System Identification of XY Table ballscrew drive using parametric and non parametric frequency domain estimation via deterministic approach. Procedia Engineering , 41. pp. 567-574. ISSN 1877-7058

Abdullah, Rohana and Abd Rahman, Md Nizam (2014) Work Study Architecture for Lean Waste Analysis to Achieve Optimum Man-Machine Configuration. International Journal of Basic and Applied Sciences IJBAS / IJENS, 14 (1). pp. 1-6. ISSN 2077-1223

Abdullah, Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Mahadhir, Majidah and Abal Abas, Zuraida (2016) Fingerprint Based Gender Classification Using Discrete Wavelet Transform And K-Nearest Neighbor. International Journal of Computer Science and Information Security (IJCSIS), 14 (8). pp. 340-344. ISSN 1947-5500

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316

Ahmad, Asmala and Mohamad Hashim, Ummi Kalsom and Abd Wahid, R. and Sakidin, Hamzah and Sufahani, Suliadi Firdaus and Mat Amin, Abd Rahman and Abdullah, Mohd Mawardy and Quegan, Shaun (2019) Implementation Of Land Cover Change Detection Based On Supervised Classifications Of Multispectral Satellite Data For Leveraging Internet Of Things. ARPN Journal Of Engineering And Applied Sciences, 14 (10). pp. 1863-1870. ISSN 1819-6608

Ahmad, Asmala and Kasmin, Fauziah and Syed Ahmad, Sharifah Sakinah and Abu Sari, Mohd Yazid and Mustapha, Muhammad Amin and Othman, Zuraini (2018) Comparison Between Edge Detection Methods On UTeM Unmanned Arial Vehicles Images. MATEC Web Of Conferences, 150. pp. 1-6. ISSN 2261-236X (In Press)

Ahmad, Asmala and Pramudya Ananta, Gede and Yusof, Norzihani and Ruslan, Siti Nur Azreen and Mohd Noor, Helmi Adly and Razali, Sharifah Nadiyah (2018) Using Experimental Design In Assistive Learning Technology Trials: An Experience-Based Review. MATEC Web of Conferences, 150. pp. 1-6. ISSN 2261-236X

Ahmad, Mohd Shakir and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Mohamad Yunus, Indera Kasuma and Azman, Mohd Syafiq (2013) Effect of Different Filler Materials in the Development of Bipolar Plate Composite for Polymer Electrolyte Membrane Fuel Cell (PEMFC). Applied Mechanics and Materials, 315 (2013). pp. 226-230. ISSN 10.4028/www.scientific.net/AMM.315.226

Ahmad Radzi, Syafeeza and Hani, Mohamed Khalil and Hindustan, Imran and Mat Ibrahim, Masrullizam and Wong, Yan Chiew (2015) Generalizing Convolutional Neural Networks For Pattern Recognition Tasks. ARPN Journal Of Engineering And Applied Sciences, 10 (12). pp. 5298-5308. ISSN 1819-6608

Al-Amani, Umar and Ahmad Fauzi , Mohd Noor and Yusliza, Yusuf and Nooririnah, Omar and Noraiham, Mohamad (2015) Effect of neodymium and samarium on the properties of bismuth titanate ceramics. Applied Mechanics and Materials, 761. pp. 397-401. ISSN 1662-7482

Al-Masoodi, Ahmed Hasan Hamood and Ahmed, Mahmoud Hazzaa M. and Abdul Latiff, Anas and Azzuhri, S.R. (2017) Passively Mode-Locked Ytterbium-Doped Fiber Laser Operation With Few Layer MoS2-PVA Saturable Absorber. Optik, 145. pp. 543-548. ISSN 0030-4026

Al-Masoodi, Ahmed Hasan Hamood and Yasin, Moh and Ahmed, Mahmoud Hazzaa M. and Abdul Latiff, Anas and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Mode-Locked Ytterbium-Doped Fiber Laser Using Mechanically Exfoliated Black Phosphorus As Saturable Absorber. Optik, 147. pp. 52-58. ISSN 0030-4026

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X

Ali, Mohd Basri and Sugumar, Dharmalingam and Shafie, Azhar and Mohd Daud, Mohd Ahadlin and Zakaria, Kamarul Ariffin and Abd Latif, Mohd Juzaila (2018) Implementation Of Automation Process In Generating Cad Model For Rim Wheel. ARPN Journal Of Engineering And Applied Sciences, 13 (2). pp. 594-598. ISSN 1819-6608

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Melt Pool And Single Track Formation In Selective Laser Sintering Selective Laser Melting. Advanced Materials Research, 933 (-). pp. 196-201. ISSN 1662-8985

Alsultani, Hamid Sadeq Mahdi and Kadhim Al-Zaidi, Qusay Kanaan and Taha Ahmed, Shaymaa and Khadhim, Ban Jawad (2018) The Use Of Spatial Relationships And Object Identification In Image Understanding. International Journal Of Civil Engineering And Technology (IJCIET), 9 (5). pp. 487-496. ISSN 0976-6308

Ang, TeohOng and Ibrahim, Zulkifilie and Ramli, Suzaimah (2014) Computer Machine Vision Inspection On Printed Circuit Boards Flux Defects. American Journal of Engineering and Applied Sciences, 6 (3). pp. 263-273. ISSN 1941-7020

Arith, Faiz and Mustafa, Ahmad Nizamuddin and Idris, Idzdihar and Abdul Latiff, Anas and Toshio, Katsuyama (2014) Effects of exciton-polariton on Mach-Zehnder interference devices. Research Journal of Applied Sciences, Engineering and Technology, 7 (15). pp. 3044-3048. ISSN 2040-7459

Asmala, A. (2013) Classification Simulation of RazakSAT Satellite. Procedia Engineering , 53. pp. 472-482. ISSN 1877-7058

Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039

Bakri, Mohammed Hariri and Dabas, Nurayati and Ismail, Shafinar and Abdul Hamid, Baharom (2018) Does securitization for government staff personal loan perform? International Journal Of Engineering And Technology (UAE), 7 (3.21). pp. 267-269. ISSN 2227-524X

Bani Hashim, Ahmad Yusairi (2019) Using worn out insole to express human foot. International Journal Of Biomedical Engineering And Technology, 29 (1). pp. 84-99. ISSN 1752-6418

Bani Hashim, Ahmad Yusairi and Noor Azuan , Abu Osman and Wan Abas, Wan Abu Bakar and Abdul Latif , Lydia (2011) Approximating the relationship among the degree of the reaction forces and the nodes on footprint during a stance phase. Applied Mathematical Modelling, x (x). pp. 1-7. ISSN 0307-904X (In Press)

Basar, Mohd Farriz and Mohamad Sapiee, Mohd Razali and Rahman, Syukri and Hamdan, Zulfiqah and Borhan, Shuhada and Sopian, Kamaruzzaman (2014) Cost analysis of pico hydro turbine for power production. AENSI Advances in Environmental Biology, 8 (14). pp. 147-151. ISSN ISSN-1995-0756

Basari, Amat Amir and Sosuke, Awaji and Seiji, Hashimoto and Shintaro, Sakamoto and Bunji, Homma and Kenji, Suto and Hiroaki, Okada and Hideki, Okuno and Kojiro, Kobayashi and Shunji , Kumagai (2015) The effect of the parameters of a vibration-based impact mode piezoelectric power generator. Shock and Vibration, 345191. pp. 1-10. ISSN 1875-9203

Basari, Amat Amir and Sosuke, Awaji and Song, Wang and Seiji, Hashimoto and Shunji , Kumagai and Kenji, Suto and Hiroaki, Okada and Hideki, Okuno and Bunji, Homma and Wei, Jiang and Shuren, Wang (2014) Shape effect of piezoelectric energy harvester on vibration power generation. Journal Of Power And Energy Engineering, 2 (9). pp. 117-124. ISSN 2327-588X

Bilge, Pinar and Abdul Rahman, Azrul Azwan (2014) A case study material flow simulation based analysis for maintenance network improvement. Journal of Advanced Manufacturing Technology. pp. 1-15. ISSN 1985-3157 July-December 2008

Bistamam, Mohd Shahril Amin and Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2017) Surface interaction between carbon patches and catalyst nanoparticle as the key factor in aligned carbon nanotube growth using alcohol catalytic CVD. NANO : Brief Reports and Reviews, 12 (1). pp. 1750012-1. ISSN 1793-2920

Bohari, Zul Hasrizal and Jali, Mohd Hafiz and Baharom, Mohamad Faizal and Mohd Nasir, Mohamad Na'im and Jaafar, Hazriq Izzuan and Wan Daud, Wan Mohd Bukhari (2014) EMG signal statistical features extraction combination performance benchmark using unsupervised neural network for arm rehab device. International Journal of Applied Engineering Research, 9 (22). pp. 12393-12402. ISSN 0973-4562

Chong, Shin Horng and Azahar, Arman Hadi and Mohamed Kassim, Anuar and Zainal Abidin, Amar Faiz and Harun, Mohamad Haniff and Nor Shah, Mohd Badril and Mohd Annuar, Khalil Azha and Manap, Mustafa and Rizman, Zairi Ismael (2018) Optimizing Central Pattern Generators (CPG) Controller For One Legged Hopping Robot By Using Genetic Algorithm (GA). International Journal Of Engineering & Technology, 7 (3). pp. 160-164. ISSN 2227-524X

Dhar Malingam, Sivakumar and Kalyanasundaram, Shankar (2013) Temperature effect on forming of self- reinforced polypropylene based lightweight metal composite structure. Journal of Engineering and Technology, 4 (1). pp. 147-157. ISSN 2180-3811

Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan (2017) Thermoplastic matrix selection for fibre metal laminate using fuzzy VIKOR and entropy measure for objective weighting. Journal of Engineering Science and Technology, 12 (10). pp. 2792-2804. ISSN 2792 - 2804

Dhar Malingam, Sivakumar and Ng, Lin Feng and Lau, S. M. and Lim, K. T. (2017) Fatigue life behaviour of glass/kenaf woven-ply polymer hybrid biocomposites. Journal of Polymers and the Environment, 26 (2). pp. 499-507. ISSN 1566-2543

Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Ab Ghani, Ahmad Fuad and Jumaat, Faizal Azli (2017) Tensile And Impact Properties Of Cost-Effective Hybrid Fiber Metal Laminate Sandwich Structures. Advances in Polymer Technology, 37 (7). pp. 2385-2393. ISSN 0730-6679

Dhar Malingam, Sivakumar and Pilvamangalam, Nisallini and Bapokutty, Omar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Quasi-static indentation behaviour of kenaf bast fibre reinforced metal laminate system. Defence S &T Technical Bulletin, 10 (3). pp. 258-271. ISSN 1985-6571 (Submitted)

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Ali, Mohd Basri and Selamat, Mohd Zulkefli and Bapokutty, Omar and Subramonian, Sivarao (2018) Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 822-827. ISSN 1819-6608

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

Draman @ Muda, Azah Kamilah and Azmi, Mohd Sanusi and Draman @ Muda, Noor Azilah and Arbain, Nur Atikah and Radzid, Amirul Ramzani (2018) Offline handwritten digit recognition using triangle geometry properties. International Journal of Computer Information Systems and Industrial Management Applications, 10. 087 - 097. ISSN 2150-7988

Draman @ Muda, Azah Kamilah and Shamsuddin, Siti Mariyam and Darus, Maslina (2007) Invarianceness of higher order united scaled-invariants. International Journal of Advances in Computer Science and Engineering, 1 (2). pp. 105-118. ISSN 0973-6999

Elzamly, Abdelrafe and Hussin, Burairah and Abu Naser, Samy S. and Doheir, Mohamed A. S. (2015) Classification of software risks with discriminant analysis techniques in software planning development process. International Journal of Advanced Science and Technology, 81 (-). pp. 35-48. ISSN 2005-4238

Elzamly, Abdelrafe and Hussin, Burairah and Abu Naser, Samy S. and Doheir, Mohamed A. S. (2015) Predicting software analysis process risks using linear stepwise discriminant analysis : Statistical methods. International Journal Of Advanced Information Science And Technology, 38 (38). pp. 108-115. ISSN 2319-2682

Ernawan, Ferda and Abu, Nor Azman and Herman, Nanna Suryana (2013) Adaptive Tchebichef moment transform image compression using psychovisual model. Journal Of Computer Science, 9 (6). pp. 716-725. ISSN 1549-3636

Fauziyah, Salehuddin and Ahmad, Ibrahim and Fazrena, Azlee Hamid and Azami , Zaharim (2011) Influence of HALO and source/drain implantation on threshold voltage in 45nm PMOS device. Australian Journal of Basic and Applied Sciences, 5 (1). pp. 55-61. ISSN 1991-8178

Fauziyah, Salehuddin (2009) Application of Taguchi Method in Optimization of Gate Oxide and Silicide Thickness for 45nm NMOS Device. International Journal of Engineering & Technology, 9 (10). pp. 94-98. ISSN 2077-1185 (Online) 2227-2712 (Print)

Fauziyah, Salehuddin (2010) Impact of SALICIDE and Source/Drain Implants on Leakage Current and Sheet Resistance in 45nm NMOS Device. Journal of telecommunication, electronic and computer engineering , 2 (1). pp. 35-41. ISSN 2180-1843

Fauziyah, Salehuddin (2011) Optimization of Process Parameter Variability in 45 nm PMOS Device using Taguchi Method. Journal of Applied Sciences, 11 (7). pp. 1261-1266. ISSN 1812-5654

Fauziyah , Salehuddin (2011) Optimization of input process parameters variation on threshold voltage in 45 nm NMOS device. International Journal of Physical Sciences, 6 (30). pp. 7026-7034. ISSN 1992-1950

HARUN, Mohd Hanif and WAN ABDULLAH, Wan Mohd Zailimi and JAMALUDDIN, Hishamuddin and ABD RAHMAN, Roslan and Khisbullah , Hudha (2014) Dynamic Response of Commuter Rail Vehicle under Lateral Track Irregularity. Applied Mechanics and Materials, 548-54. pp. 948-952. ISSN 1662-7482.

Halim, Isa and Omar, Noor Rawaida and Kamat, Seri Rahayu and Abdullah, Rohana and Saptari, Adi and Othman, Mohd Shahrizan (2014) Analysis Of Muscle Activity Using Surface Electromyography For Muscle Performance In Manual Lifting Task. Applied Mechanics and Materials, 564. pp. 644-649. ISSN 1660-9336

Halim, Isa and Radin Umar, Radin Zaid and Ahmad, Nadiah and Abdul Rahim, Ruslinda and Zakaria, Nurul Farahizzati (2017) Conceptual Design Of Shielded Metal Arc Welding Workstation: Work Posture And Bead Dimension Consideration. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 19-32. ISSN 1985-3157

Halim, Isa and Radin Umar, Radin Zaid and Padmanathan, Vinothini and Too, Yi Wei (2018) Physical Risk Factors And Observational Tools For Computer Office Workers–An Overview. International Journal Of Mechanical Engineering And Technology (Ijmet), 9. 694–704. ISSN 0976-6359

Hamzah, Rostam Affendi and Gan, Melvin Yeou Wei and Nik Anwar, Nik Syahrim (2019) Stereo Matching Based On Absolute Differences For Multiple Objects Detection. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 261-267. ISSN 1693-6930

Hamzah, Rostam Affendi and Ibrahim, Haidi (2018) Improvement Of Stereo Matching Algorithm Based On Sum Of Gradient Magnitude Differences And Semi-Global Method With Refinement Step. Electronics Letters, 54. pp. 876-878. ISSN 0013-5194

Hamzah, Rostam Affendi and Ibrahim, Haidi and Abu Hassan, Anwar Hasni (2016) Stereo Matching Algorithm Based On Illumination Control To Improve The Accuracy. Image Analysis & Stereology, 35 (1). pp. 39-52. ISSN 1580-3139

Hamzah, Rostam Affendi and Kadmin, Ahmad Fauzan and Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Salam, Saifullah (2017) Disparity Refinement Process Based On Ransac Plane Fitting For Machine Vision Applications. Journal Of Fundamental And Applied Sciences, 9 (4S). pp. 226-237. ISSN 1112-9867

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Sahbudin, Saari and Majlis, B.Y and Menon, P.S (2012) Performance of Optical Wavelength Demultiplexer based on Silicon- on- Insulator (SOI) Microring Resonators (MRRs). Advanced Materials Research, 378-379. pp. 549-552. ISSN 1662-8985

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Sahbudin, Saari and Menon, P.S (2012) Process Modeling, Optimization and Characterization of Silicon <100> Optical Waveguides by Anisotropic Wet Etching. Advanced Materials Research, 403-408. pp. 4295-4299. ISSN 1662-8985

Haroon, Hazura and Khalid, Siti Sarah (2017) An Overview Of Optical Fiber Sensor Applications In Liquid Concentration Measurements. Journal Of Advanced Review On Scientific Research, 36 (1). pp. 1-7. ISSN 2289-7887

Hasan, Rafidah and Azmi, Muhamad Syafwan and Rosli , Nur Ameelia and Alkahari , Mohd Rizal and Ismail , Rainah (2018) Static And Dynamic Analysis Of FDM Printed Lattice Structures For Sustainable Lightweight Material Application. Progress In Industrial Ecology, 12. pp. 247-259. ISSN 1476-8917

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Mohd Soufhwee, Abd Rahman (2013) Surface Energy and Crystallite Size Comparisons by Applying Direct Current and Pulse Direct Current on Substrate Bias in PVD Process. Surface Energy and Crystallite Size Comparisons by Applying Direct Current and Pulse Direct Current on Substrate Bias in PVD Process, 315 (doi:10). pp. 98-102. ISSN 1660-9336

Hashim, Hanizam and Salleh, Mohd Shukor and Omar, M.Z. and Sulong, A.B. (2019) Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite. Journal Of Alloys And Compounds, 788. pp. 83-90. ISSN 0925-8388

Hashim, Ummi Rabaah and Draman @ Muda, Azah Kamilah and Kanchymalay, kasturi and A. Jalil, Intan Ermahani and Mohd Hashim, Siti Zaiton and Othman, Muhammad Hakim (2017) Systematic feature analysis on timber defect images. International Journal Of Advances In Intelligent Informatics, 3. pp. 56-67. ISSN 2442-6571

Herman, Nanna Suryana and Abu, Nur Azman and Ernawan, Ferda (2014) Integrating a smooth psychovisual threshold into an adaptive JPEG image compression. Journal Of Computers, 9 (3). pp. 644-653. ISSN 1796-203X

Hisamuddin, N. and Jusoh, Zulzilawati and Zakaria, U. N. and Zulkifli, Mohd Zamani and Abdul Latiff, Anas and Yasin, Moh and Ahmad, Harith and Harun, Sulaiman Wadi (2017) Q-Switched Raman Fiber Laser With Titanium Dioxide Based Saturable Absorber. Optoelectronics And Advanced Materials – Rapid Communications, 11 (3-4). pp. 127-130. ISSN 1842-6573

Hussein, Nur Izan Syahriah and Rasidi, Mohd Kamarul Shaufi and Ayof, Mohd Nizam (2015) Experimental Methods For NICRBSI-WC Cladding On Gray Cast Iron Trim Cutter Die. APPLIED MECHANICS AND MATERIALS, 761. pp. 298-302. ISSN -

Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Zainon, Maslan and Ahmad, Emy Zairah and Idris, Norain (2018) Modelling And Simulation Of A Wind Turbine With Doubly Fed Induction Generator In Full Load Operation. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 57-63. ISSN 1819-6608

Ifayefunmi, Olawale (2014) A survey of buckling of conical shells subjected to axial compression and external pressure. Journal of Engineering Science and Technology Review , 7 (2). pp. 182-189. ISSN 1791-2377

Ismail, Mohd Muzafar and Othman, Mohd Azlishah and Zakaria, Zahriladha and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Ramlee, Ridza Azri and Meor Said, Maizatul Alice and Abas, Norafizah and Zainuddin, Muhammad Noorazlan Shah and Abdul Rahim, Razilah and Mohamed Aminuddin, Mai Mariam and Idris, Muhammad Idzdihar (2014) Bending Waveguide Modeling For Light Trapping Into Optical Fiber. Advanced Science Letters, 20 (2). pp. 412-417. ISSN 1936-6612

Jaafar, Hazriq Izzuan and Mohamed, Zaharuddin and Shamsudin, Mohamad Amir and Mohd Subha, Nurul Adilla and Ramli, Liyana and Abdullahi, Muhammad Auwalu (2019) Model Reference Command Shaping For Vibration Control Of Multimode Flexible Systems With Application To A Double-Pendulum Overhead Crane. Mechanical Systems And Signal Processing, 115. pp. 677-695. ISSN 0888-3270

Jimit, Roy Hanson and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Dhar Malingam, Sivakumar (2018) Tensile and fatigue behaviour of glass fibre reinforced polyester composites. International Journal Of Engineering And Technology, 7 (3.17). pp. 25-27. ISSN 2227-524X

Kadir, N. A. A. and Ismail, E. I. and Abdul Latiff, Anas and Ahmad, H. and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Transition Metal Dichalcogenides (WS2 And MoS2) Saturable Absorbers For Mode-Locked Erbium-Doped Fiber Lasers. Chinese Physics Letters, 34 (1). 014202-1. ISSN 0256-307X

Kamarul Ariffin, Zakaria and Ad Suhadak, Fadrah Hanim and Mohd Razalli, Ammer Ezhar and Kassim, M.S (2017) Fatigue Damage Analysis Of Automobile Steering Knuckle Using Finite Element Analysis. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4225-4228. ISSN 1819-6608

Karis, Mohd Safirin and Abdul Razif, Nur Rafiqah and Mohd Ali, Nursabillilah and Rosli, M. Asyraf and Mohd Aras, Mohd Shahrieel and Md Ghazaly, Mariam (2016) Local Binary Pattern (LBP) With Application To Variant Object Detection: A Survey And Method. 2016 IEEE 12TH INTERNATIONAL COLLOQUIUM ON SIGNAL PROCESSING & ITS APPLICATIONS (CSPA2016), - (-). pp. 221-226. ISSN -

Karis, Mohd Safirin and Mohd Saad, Wira Hidayat and Mohd Ali, Nursabillilah and Khor, Chin We and Abdul Razif, Nur Rafiqah (2016) Fruit Sorting Based On Machine Vision Technique. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 31-35. ISSN 2180-1843

Kasim, Ayu Natasya and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar Malingam, Sivakumar (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2229-8649

Kassim, Dg Hafizah and Putra, Azma and Mohd Nor, Mohd Jailani and Hamzah, Ain Nur Haznida (2017) Preliminary Study Of Acoustical Treatment In A Scaled Model Mosque. International Review Of Mechanical Engineering (IREME), 11 (4). pp. 222-227. ISSN 1970-8734

Khairuddin, Osman and Ahmad 'Athif , Mohd Faudzi and Mohd Fua'ad , Rahmat and Koichi, Suzumori (2014) System Identification And Embedded Controller Design For Pneumatic Actuator With Stiffness Characteristic. Mathematical Problems in Engineering, 2014. pp. 1-13. ISSN 1563-5147

Liaw , Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2016) Study The Feasibility Of Parabolic Dish (Pd) From Several Prospective Criteri In Malaysia Environment. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3929-3937. ISSN 1819-6608

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562

Lim , Wee Teck and Sulaiman , Marizan and Mohd Shah, Hairol Nizam and OMAR, ROSLI (2010) Implementation of Shape – Based Matching Vision System in Flexible Manufacturing System. Journal of Engineering Science and Technology Review , 3 (1) (1). pp. 128-135. ISSN 1791-2377

Low , Yin Fen (2011) A performance study of the wavelet-phase stability (WPS) in auditory selective attention. Brain Research Bulletin, 86 (1-2). pp. 110-117. ISSN 0361-9230

Lubis, Abdul Munir Hidayat Syah and Ariwahjoedi, Bambang and Sudin, Mustafar (2015) Investigation On Oxidation And Thermal Stability Of Jatropha Oil. Jurnal Teknologi, 77 (21). pp. 79-83. ISSN 0127-9696

M., Zulkiflee and M.A, Faizal and I.O, Mohd Fairuz and Abu, N. A. and Sahib, S. (2011) Behavioral Analysis on IPv4 Malware in both IPv4 and IPv6 Network Environment. International Journal of Computer Science and Information Security, 9 (2). ISSN 1947-5500

M. R., Sapiee and Noordin, A. (2010) Adaptive Gain Controller Using Model Reference Adaptive Control Method Stability Approach For Road Vehicle Following System. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 2 (1). pp. 55-70. ISSN 2180-1053

M. R., Sapiee and Sudin, Shahdan (2010) Road Vehicle Following System With Adaptive Controller Gain Using Model Reference Adaptive Control Method. International Journal of Simulation Systems, Science & Technology, 11 (5). pp. 24-32. ISSN 1473-804x

M. S., Kamil and A. M., Kamely and H. Y., Saifudin and A. P., Puvanasvaran and M.M.P., Dan (2010) The Source of Uncertainty in 3D Laser Scanner. Journal of Advanced Manufacturing and Technology, 4 (1). pp. 87-96. ISSN 1985-3157

M. Yusoff, Z. and A. Aziz, M. A. and Razali, N. F. and Nordin, S. A. and Zainal Abidin, Amar Faiz and Zain, N. M. (2017) The Study Of Dynamic Response Using ARX Model In Extraction Process. Journal Of Fundamental And Applied Sciences, 9 (4S). pp. 145-159. ISSN 1112-9867

MOHAMAD, EFFENDI and Abdullah, Rohana and Wan Mahmood, Wan Hasrulnizzam (2008) COMMUNICATION GAP ANALYSIS AT AEROSPACE MANUFACTURING COMPANY. Journal of Human Capital Development, 1 (1). pp. 21-27. ISSN ISSN: 1985-7012

Mad Lazim, Muzafirah and Hashim, Nik Mohd Zarifie and Sulaiman Wong, Najibah and Salleh, Azahari (2014) A Study On Image Enhancement. International Journal of Emerging Technology & Research, 1 (6). pp. 67-73. ISSN 2347-6079

Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792

Mahyuddin, Mohamad Badrol Hisyam and Abdul Latiff, Anas and Mohd Rusdi, Muhammad Farid and Irawati, Ninik and Harun, Sulaiman Wadi (2017) Quantum Dot Cadmium Selenide As A Saturable Absorber For Q-Switched And Mode-Locked Double-Clad Ytterbium-Doped Fiber Lasers. Optics Communications, 397. pp. 147-152. ISSN 0030-4018

Maidin, Shajahan and Abdul Aziz, Khairul Fahmi and Muhamad, Muhammad Kazimi and E. Pei (2015) Analysis of applying ultrasonic frequency on a desktop FDM nozzle. Journal of Applied Mechanics and Materials, 761 (-). pp. 329-333. ISSN 1660-9336

Mardiana, Bidin and Hanim, Abdul Razak and Haroon, Hazura and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) 2x2 Optical Switch Based on Silicon-On-Insulator Microring Resonator. Advanced Materials Research. pp. 531-534. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Active SOI Optical Ring Resonator Based on Free Carrier Injection. Advanced Materials Research , 403-40. pp. 758-761. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Performance of the Active Microring Resonator Based on SOI Rib Waveguide. Advanced Materials Research, 462. pp. 375-379. ISSN 1662-8985

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2012) Plasma Dispersion Effect for Various Doping Configuration on the SOI Phase Modulator with Trapezoidal Rib Waveguide. Advanced Materials Research, 403-40. pp. 4403-4407. ISSN 1662-8985

Mardiana, Bidin and Sahbudin, Saari and Menon, P.S and Haroon, Hazura and Hanim, Abdul Razak and Arsad, N. and Abdullah, H. (2014) Analyses for various doping structures of SOI-based optical phasemodulator using free carrier dispersion effectB. Optik, 125. pp. 1800-1803. ISSN 0030-4026

Mat Harttar, Maziati Akmal and Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Azmi, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, Mohd Shahir (2017) Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique. Ceramics International, 44. pp. 317-325. ISSN 0272-8842

Mat Noor, Noraina Alia and Abd Razak, Jeefferie and Ismail, S. and Mohamad, N. and Yaakob, M. Y. and T. H., Theng (2017) Influence Of MWCNTs Addition On Mechanical And Thermal Behavior Of Epoxy/Kenaf Multi-Scale Nanocomposite. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-10. ISSN 1757-899X

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X

Md Fahmi, Abd Samad (2014) Evolutionary Computation in System Identification: Review and Recommendations. International Journal of Automatic Control. pp. 208-216. ISSN 19746059

Md Ghazaly, Mariam and Yeo, Chin Kiat and Chong, Shin Horng and Yusri, I and Tee, Siau Ping (2017) Parameter Optimization Of A Tubular Linear Type Reluctance Motor For High Thrust Force. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9. pp. 117-120. ISSN 2180-1843

Md Isa, Ida Syafiza and Mohd Shaari Azyze, Nur Latif Azyze and Ibrahim Tuani, Ahamed Fayeez (2014) Portable Wireless Traffic Light System (PWTLS). PORTABLE WIRELESS TRAFFIC LIGHT SYSTEM (PWTLS), 03 (02). pp. 242-247. ISSN 2319-1163

Md. Hashim, N. and Asmala, A. and Abdullah, M. (2007) Mapping urban heat island phenomenon: Remote sensing approach. Journal - The Institution of Engineers, Malaysia, 68 (3). pp. 25-30. ISSN 0538-0057

Misha, Suhaimi and Mat, Sohif and Ruslan, Mohd Hafidz and Salleh, Elias @ Ilias and Sopian, Kamaruzzaman (2014) Performance of a solar assisted solid desiccant dryer for kenaf core fiber drying under low solar radiation. Solar Energy, 112. pp. 194-204. ISSN 0038-092X

Miswan, Siti Aishah and Azmi, Mohd Sanusi and Arbain, Nur Atikah and Tahir, Azrina and Radzid, Amirul Ramzani (2018) Rearrangement Of Coordinate Selection For Triangle Features Improvement In Digit Recognition. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-7). pp. 115-119. ISSN 2180-1843

Mohamad, Ahmad Kamely and Sued, Mohammad Kamil and Chong, Wan Chin (2011) Mathematical modeling of surface roughness in surface grinding operation. International Journal of Engineering and Natural Sciences , 5 (3). pp. 146-149. ISSN 2010-4014

Mohamad, Ahmad Kamely and Sued, Mohammad Kamil and Chong, Wan Chin (2011) Mathematical modeling of surface roughness in surface grinding operation. International Journal of Engineering and Natural Sciences, 5 (3). pp. 146-149. ISSN 2010-4014

Mohamad, Effendi (2013) Characteristic Mapping Of Overall Equipment Effectiveness Elements Through Simulation And The Taguchi Method. Journal of Human Capital Development, 6 (2). pp. 1-11. ISSN 1985-7012

Mohamad, Effendi (2013) Quantifying Benefits Of Lean Manufacturing Tools Implementation With Simulation In Coolant Hose Factory. Journal of Human Capital Development, 6 (2). pp. 13-26. ISSN 1985-7012

Mohamad, Effendi and Muhamad, Mohd Razali and Abdullah, Rohana and Adi , Saptari (2008) A Study on the Development of Key Performance Indicators (KPIs) At an Aerospace Manufacturing Company. Journal of Advanced Manufacturing Technology (JAMT) , 2 (2). pp. 1-17. ISSN 1985-3157

Mohamad, Effendi and Salleh, Mohd Rizal (2012) Simulation Study Towards Productivity Improvement for Assembly Line. Journal of Human Capital Development, 5 (2). pp. 59-69. ISSN 1985-7012

Mohamad, Effendi and Sobiren, Norhaslina and Saptari, Adi and Salleh, Mohd Rizal (2009) The Implementation Of Risk Management At Aerospace Manufacturing Company. Journal of Human Capital Development, 2 (1). pp. 25-36. ISSN ISSN: 1985-7012

Mohamad, Noraiham and Yaakub , Juliana and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Yaakob, Mohd Yuhazri and Lau, Kok Tee and Ahsan, Qumrul and Shueb, Mohammed Iqbal and Othman, R. (2017) Vibrational Damping Behaviors Of Graphene Nanoplatelets Reinforced NR/EPDM Nanocomposites. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3274-3287. ISSN 2289-4659

Mohamad, Noraiham and Mazlan, Mazliah and Ab Maulod, Hairul Effendy and Abdul Razak, Jeefferie and Hamdan, Mohd Mef’at (2018) Rebound Resilience Of Natural Rubber Composites Via Response Surface Methodology. Proceedings Of Mechanical Engineering Research Day 2018, 1. pp. 130-131. ISSN 978-967-2145-20-2

Mohamad Hashim, Ummi Kalsom and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Sakidin, Hamzah and Balakrishnan, Subatira and Mohamad Isa, Mohd Sa'ari (2016) Change detection from landsat-5 TM satellite data. ARPN Journal Of Engineering And Applied Sciences, 11 (17). pp. 10234-10238. ISSN 1819-6608

Mohamad Jaya, Abdul Syukor and Hasan Basari, Abd Samad and Mohd Hashim, Siti Zaiton and Haron, Habibollah and Muhamad, Muhd. Razali and Abd. Rahman, Md. Nizam (2011) Application of ANFIS in Predicting of TiAlN Coatings Hardness. Australian Journal of Basic and Applied Sciences, 5 (9). pp. 1647-1657. ISSN 1991-8178

Mohamad Jaya, Abdul Syukor and Muhamad, Mohd Razali and Abd Rahman, Md Nizam and Mohammad Jarrah, Mu'ath Ibrahim and Hasan Basari, Abd Samad (2015) Modeling And Optimization Of Physical Vapour Deposition Coating Process Parameters For Tin Grain Size Using Combined Genetic Algorithms With Response Surface Methodology. Journal Of Theoretical And Applied Information Technology, 77. pp. 236-252. ISSN 1992-8645

Mohamad Shukri , Zakaria (2013) Greenhouse Gas Reduction by Utilization of Cold LNG Boil-off Gas. Procedia Engineering, 53. pp. 645-649. ISSN 1877-7058

Mohamad Yatim, Norazlina and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Noraiham and Yusof, Faridah (2019) Urea functionalized multiwalled carbon nanotubes as efficient nitrogen delivery system for rice. Advances In Natural Sciences: Nanoscience And Nanotechnology, 10 (1). pp. 1-11. ISSN 2043-6262

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2019) Focus Loss While Driving Detection By Using Prior Stage ERP As Baseline. International Journal Of Human And Technology Interaction (IJHaTI), 3 (1). pp. 39-46. ISSN 2590-3551

Mohammad, Muhammad Azrain and Mansor, Muhd Ridzuan and Sheikh Md Fadzullah, Siti Hajar and Omar, Ghazali and Dhar Malingam, Sivakumar and Nordin, Mohd Nur Azmi and Lim, L. M. (2018) Analysis of mechanisms responsible for the formation of dark spots in organic light emitting diodes (OLEDs): a review. Synthetic Metals, 235. pp. 160-175. ISSN 0379-6779

Mohammad Taha, Mastura and Salit @ Sinon, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application Of Hybrid Sugar Palm-Filled Polyurethane Application Of Hybrid Sugar Palm-Filled Polyurethane Composites In Conceptual Design Of An Automotive Anti Roll Bar. Journal of Engineering and Technology (JET), 7 (1). pp. 102-113. ISSN 2180-3811

Mohd Abid, Mohd Asyadi Azam (2012) Direct growth of vertically aligned single-walled carbon nanotubes on conducting substrate and its electrochemical performance in ionic liquid. Physica Status Solidi A, 209 (11). pp. 2260-2266. ISSN 1862-6319

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin (2013) Development of high performance electrochemical capacitor: A systematic review of electrode fabrication technique based on different carbon materials. ECS Journal of Solid State Science and Technology, 2 (10). M3101-M3119. ISSN 2162-8777

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and RAJA ABDULLAH, RAJA IZAMSHAH and Mohamad, Noraiham (2014) Electrode Fabrication and Electrochemical Analysis of AC/Graphene-Based Electrochemical Capacitor in 1 M H2SO4. Advanced Science, Engineering and Medicine, 6. pp. 1-4. ISSN 2164-6627

Mohd Abid, Mohd Asyadi Azam and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Abd Rashid , Mohd Warikh (2014) An overview of selected catalytic chemical vapor deposition parameter for aligned carbon nanotube growth. Nanoscience & Nanotechnology-Asia, 4 (1). pp. 2-30. ISSN 2210-6820

Mohd Abid, Mohd Asyadi Azam and Mohd Warikh, Abd Rashid (2013) X-ray and morphological characterization of Al-O thin films used for vertically aligned carbon nanotube growth. Advanced Materials Research. pp. 213-218. ISSN 10226680

Mohd Abid, Mohd Asyadi Azam and Rosle, Muhammad Firdaus (2013) Electrochemical Analyses of Carbon Nanotube Based Supercapacitor in 1M LiPF6 Organic Electrolyte. International Journal of Electroactive Materials, 1. pp. 55-59. ISSN 2289-179X

Mohd Abid, Mohd Asyadi Azam and Talib, Elyas and Mohamad, Noraiham and Kasim, Mohd Shahir and Abd Rashid , Mohd Warikh (2014) Mechanical and Thermal Properties of Single-Walled Carbon Nanotube Filled Epoxidized Natural Rubber Nanocomposite. Journal of Applied Sciences, 14 (18). pp. 2183-2188. ISSN 1812-5654

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2015) Synthesis of Fe catalyst nanoparticles by solution process towards carbon nanotube growth. Materials Technology, 30 (A1). A8-A13. ISSN 1066-7857

Mohd Abid, Mohd Asyadi Azam and raja seman, raja noor amalina and Abdul Manaf, Nor Syafira (2015) Electrochemical performance of activated carbon and graphene based supercapacitor. Materials Technology, 30 (A1). A14-A17. ISSN 1066-7857

Mohd Abid, Mohd Asyadi Azam and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah (2013) Nanostructuring Ultra-thin Co Films to Active Catalyst Particles for Vertically Aligned Single-Walled CNT Growth. Procedia Engineering , 68. pp. 566-571. ISSN 1877-7058

Mohd Abid, Mohd Asyadi 'Azam and Raja Seman, Raja Noor Amalina and Mohamed Effendi, Salmi (2017) Preparation Of Hydrous Ruthenium Oxide/Activated Carbon Electrode And Its Supercapacitive Performance In 6 M KOH. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (2). pp. 1-8. ISSN 1985-3157

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Bistamam, Mohd Shahril Amin and Talib, Elyas (2013) Aligned carbon nanotube from catalytic chemical vapor deposition technique for energy storage device: a review. Ionics, 19 (11). pp. 1455-1476. ISSN 0947-7047 (Print); 1862-0760 (Online)

Mohd Abid, Mohd Asyadi Azam and Isomura , Kazuki and Ismail, Syahriza and Mohamad, Noraiham and Shimoda, Tatsuya (2015) Electrically Conductive Aluminum Oxide Thin Film Used As Cobalt Catalyst-Support Layer In Vertically Aligned Carbon Nanotube Growth. Advances In Natural Sciences : Nanoscience And Nanotechnology, 6 (-). pp. 1-6. ISSN -

Mohd Abid, Mohd Asyadi Azam and Zulkapli, Nor Najihah (2015) Systematic review of catalyst nanoparticles synthesized by solution process: towards efficient carbon nanotube growth. Journal of Sol-Gel Science and Technology, 73 (2). pp. 484-500. ISSN 0928-0707

Mohd Amman, Rosmia and Halim, Mohd Faizal and Dhar Malingam, Sivakumar and Abu Shah, Ismail (2016) Influences of thickness and geometrical change from draw forming in quasi-static axial compression simulation. International Review on Modelling & Simulations, 9 (6). pp. 442-449. ISSN 1974-9821

Mohd Annuar, Khalil Azha and Ab Hadi, Nik Azran and Subramaniam, Siva Kumar and Mohd Ab Halim, Mohd Firdaus and Nor Shah, Mohd Badril and Kadmin, Ahmad Fauzan and Mohd Noh, Mohd Syahrin Amri and Abdul Salam, Azuki (2017) Intelligent Image Capturing Alarm System Using Raspberry Pi. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (4). pp. 1651-1658. ISSN 1693-6930

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Ab Hadi, Nik Azran (2018) An Analysis Of The Beneficial Of Energy Saving Device. ARPN Journal Of Engineering And Applied Sciences, 13 (8). pp. 2912-2915. ISSN 1819-6608

Mohd Aras, Mohd Shahrieel and Ab Azis, Fadilah and Othman, Muhammad Nur (2012) A Low Cost 4 DOF Remotely Operated Underwater Vehicle Integrated With IMU and Pressure Sensor. 4th International Conference on Underwater System Technology: Theory and Applications 2012 (USYS'12). pp. 18-23. ISSN 978-983-43178-6-7

Mohd Aris, Nor Azlan and Luini, Lorenzo and Din, Jafri and Lam, Hong Yin (2013) 1-minute integrated rain rate statistics estimated from Tropical Rainfall Measuring Mission data. IEEE Antennas and Wireless Propagation Letters, 12. pp. 132-135. ISSN 1536-1225

Mohd Ishak, Noordiana and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan (2017) Weighting of natural fibre criteria for fibre metal laminate using entropy method for car front hood utilization. Key Engineering Materials, 740. pp. 75-80. ISSN 1662-9795

Mohd Rody , Mohamad Zin (2010) Numerical Study of Droplet Dynamics on Solid Surface. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 2 (2). pp. 92-100. ISSN 2180-1053

Mohd Rosli, Mohd Afzanizam and Misha, Suhaimi and Sopian, Kamaruzzaman and Mat, Sohif and Sulaiman, M. Yusof and Salleh, Elias @ Ilias (2014) The effects of thermal conductivity on photovoltaic thermal collector sheet in tube type. World Applied Sciences Journal, 31 (4). pp. 625-629. ISSN 1818-4952

Mohd Rosli, z.m.rosli and Kwan, Wai Loon and Jariah, Mohamad Juoi and Nafarizal , Nayan and Zainab , Mahamud and Yusliza, Yusuf (2013) Characterization of TiAlBN Nanocomposite Coating deposited via Radio Frequency Magnetron Sputtering using Single Hot-Pressed Target. Advanced Materials Research, Vol. 626 (2013). pp. 298-301. ISSN 1022-6680

Mohd Rusdy , Yaacob and Lim , Wee Teck and Nik Anwar, Nik Syahrim (2014) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. Advanced Materials Research. pp. 303-308. ISSN 1662-8985

Mohd Salleh, Siti Hasmah and Othman, Mohd Azlishah and Ali, Nadhirah and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Abd Aziz, Mohamad Zoinol Abidin (2015) Microwave Imaging Technique Using UWB Signal For Breast Cancer Detection. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 723-727. ISSN 1819-6608

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Ali, Nursabillilah and Mohd Aras, Mohd Shahrieel and Wasbari, Faizil and Omar, Zakarya Ali Ahmed (2017) A 3D Mapping Of The Surrounding Object Using Stereo-Vision Technique. International Journal of Soft Computing and Engineering (IJSCE), 12 (1). pp. 59-65. ISSN 1816-9503

Mohd Suan, Mohd Shahadan and Ahmad, Nurulnabilah and Ismail, Syahriza and A. Bakar, F. I. (2018) Synthesis Of a Fe2o3 Nanowires/MWCNTS Composite For Photocatalyst. Journal of Physics: Conference Series, 1082. 012048. ISSN 1742-6596

Mohd Tumari, Mohd Zaidi and Abd Rashid, Wan Norhisyam and Ab Hadi, Nik Azran and Ahmad, Mohd Ashraf and Suid, Mohd Helmi and Ghazali, Mohd Riduwan (2018) Liquid Slosh Suppression By Using Hybrid Model-Free Fuzzy-PID Controller With Derivative Filter. Journal Of Advanced Research In Dynamical And Control Systems, 10spec. pp. 1423-1433. ISSN 1943-023X

Mohd Yassim, Halyani and Hussin, Mohamed Saiful Firdaus and M. S., Azizi and A., Tajul and R. F., Farhana (2016) Modeling And Simulation Of Wind Turbine For Partial Load Operation. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 4934-4941. ISSN 1819-6608

Mohd Yassim, Halyani and Hussin, Mohamed Saiful Firdaus and Mohd Ali, Nursabillilah and Fauzi, Muhammad Ashraf and Ismail, Zulkefli and Rosli, Fatin Farhana (2019) Conceptual Design Approach And Ergonomics Analysis Of Fire Resistant Purpose Shield. ARPN Journal Of Engineering And Applied Sciences, 14 (6). pp. 1264-1268. ISSN 1819-6608

Mohmad, Martini and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite. Industrial Lubrication And Tribology, 69 (5). pp. 768-774. ISSN 0036-8792

Moketar, Nor Aiza and Kamalrudin, Massila and Mohd Yusof, Mokhtar and Sidek, Safiah and Robinson, Mark (2017) A Study Of Generating Abstract Test For Requirement Validation Among Requirement Engineers. Journal Of Theoretical And Applied Information Technology, 95 (7). pp. 1381-81388. ISSN 1992-8645

Muda, A. K. and Shamsuddin, S. M. and Abraham, A. (2010) Improvement of Authorship Invarianceness for Individuality Representation in Writer Identification. International Journal on Non-Standard Computing and Artificial Intelligence - Neural Network World. pp. 371-387. ISSN 1210-0552

Muhamad Shahirul, Mat Jusoh and Mohd Yazid, Yahya and Nur Izan Syahriah, Hussein (2016) The Effect Of Fibre Layering Pattern In Resisting Bending Loads Of Natural Fibre-Based Hybrid Composite Materials. MATEC Web Of Conferences, 39. 01005-1. ISSN 2261-236X

Musa, Haslinda and Safri, Nursyairalia and Yunus, Ahmad Rozelan and OTHMAN , MOHD AZLISHAH (2016) The Characteristics of Users in the Adoption of Low Loss Microwaves Transmission Glass: A Conceptual Paper. Procedia - Social and Behavioral Sciences. pp. 548-554. ISSN 1877-0428

Nady, Ahmad and Ahmed, Mahmoud Hazzaa M. and Numan, Arshid and T. Subramaniam, Ramesh and Abdul Latiff, Anas and Ooi, Raymond C. H. and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Passively Q-Switched Erbium-Doped Fibre Laser Using Cobalt Oxide Nanocubes As A Saturable Absorber. Journal Of Modern Optics, 64 (13). pp. 1315-1320. ISSN 0950-0340

Nasir, Nurulhilmi Zaiedah and Mohd Daud, Mohd Ahadlin and Bapokutty, Omar and Din, Abdul Talib and Selamat, Mohd Zulkefli (2015) Influence of heat treatment on impact, hardness and fatigue strength of 6061 aluminium alloy. Applied Mechanics and Materials , 761 (-). pp. 484-488. ISSN 1662-7482

Nasir, Nurulhilmi Zaiedah and Mohd Daud, Mohd Ahadlin and Selamat, Mohd Zulkefli and Rivai, Ahmad and Dhar Malingam, Sivakumar (2015) The effect of heat treatment on fatigue and mechanical properties of 6061 aluminium alloy. Applied Mechanics and Materials, 699. pp. 227-232. ISSN 1660-9336

Nasruddin , Abu Sari and A. , Asmala and Mohd Yazid , Abu Sari and S. , Sahib and A. W. , Rasib (2015) Development of rapid low-cost lars platform for oil palm plantation. Jurnal Teknologi , 77 (26). pp. 51-57. ISSN 2180-3722

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence of kenaf fibre orientation effect on the mechanical properties of hybrid structure of fibre metal laminate. Pertanika Journal of Science & Technology, 25 (S5). pp. 1-8. ISSN 0128-7680

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli (2017) Fatigue performance of hybrid fibre metal laminate structure. International Review of Mechanical Engineering, 11 (1). pp. 61-68. ISSN 1970-8734

Nik Mohd Salleh, Nik Muhammad Farid and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Nirmal, Umar and Megat Ahmad, Megat Muhammad Hamdan and Yaakob, Mohd Yuhazri and Amir Mohamed, Kamarul (2018) Degradation Behaviour Of Treated Betelnut Fibres Reinforced Polyester Composites For Tribological Applications. World Review Of Science, Technology And Sustainable Development, 14 (2/3). pp. 180-227. ISSN 1741-2242

Nordin, Mohd Nur Azmi and Goda, Kohichi and Azhari, Muhamad Haikal and Kenji, Sakamoto and Okamoto, Masaki and Ito, Hirokazu and Endo, Takashi (2018) Tensile and impact properties of pulverized oil palm fiber reinforced polypropylene composites: A comparison study with wood fiber reinforced polypropylene composites. Journal Of Mechanical Engineering And Sciences, 12. pp. 4191-4202. ISSN 2289-4659

Nordin, Mohd Nur Azmi and Makino, Yuta and Goda, Koichi and Ito, Hirokazu (2015) Fatigue Fracture Properties Of Wood Plastic Composites. The Journal Of The Society Of textile Industry, 71. pp. 339-344. ISSN 0037-9875

Nur Rifhan , Rosli and Azizah , Shaaban and Jariah , Mohamad Juoi and Nur Farizan , Ayoob (2011) Characterisation and Properties of Sintered Recycled Glass utilising CIP Method. Key Engineering Materials, 471-47. pp. 245-250. ISSN 1013-9826

Omar, Nooririnah and Raja Mohd Rasi, Raja Zuraidah and Zainudin, Mohd Harris Fadhilah and Azhari, Muhamad Azwar and Yusuf, Yusliza and Mustafa, Nuzaimah and Azlan, Umar Al Amani and Razi, M. H.F.A. and Ismail, Syahriza and Mohamad, S. (2018) Experimental Study Of Welded Joints On Steel Plate Cold-Rolled Sheet Metal Using Different Electrode Tips. Journal of Advanced Manufacturing Technology (JAMT) , 12. pp. 1-16. ISSN 1985-3157

Osman, Edynoor and Abd Rashid, Mohd Warikh and T., Moriga and K., Murai and Abd Manaf, Mohd Edeerozey (2017) Transparent Coating Oxide - Indium Zinc Oxide As Conductive Coating : A Review. Reviews On Advanced Materials Science, 49. pp. 150-157. ISSN 1605-8127

Osman, Khairuddin (2014) Integrating Servo-Pneumatic Actuator with Ball Beam System based on Intelligent Position Control. Jurnal Teknologi, 69 (3). pp. 73-79. ISSN E-ISSN2180-3722

Othman, Radzali and Mustafa, Zaleha and Ishak, Nor Fatiha and Pham, Trung Kien and Shamsudin, Zurina and Mohd Rosli, Zulkifli and Mohd Noor, Ahmad Fauzi (2018) Intermediate Phases Formed During Synthesis Of β-Tricalcium Phosphate Via Wet Precipitation And Hydrothermal Methods. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48 (2). pp. 141-147. ISSN 2289-7879

Padmanathan, Vinothini and Halim, Isa and Too, Yi Wei (2019) Application Of Pressure Biofeedback Unit As Part Of Ergonomics Assessment Tools For Assessing Back Pain Among Computer Users. International Journal Of Advanced Trends In Computer Science And Engineering, 8 (3). pp. 879-882. ISSN 2278-3091

Poh, Kiat Ng and Meng, Chauw Bee and Saptari, Adi and Mohamad, Nor Akramin (2014) A Review Of Different Pinch Technique. Theoretical Issues in Ergonomics Science, 15 (5). pp. 517-533. ISSN -

Poh, Kiat Ng and Qiao, Hui Boon and Ka, Xuan Chai and Shiong, Lung Leh and Meng, Chauw Bee and Saptari, Adi (2014) The Roles Of Shape And Size In The Pinch Effort Of Screw Knobs. Applied Mechanics and Materials, 465-46 (-). pp. 1202-1206. ISSN 1660-9336

Poh, Kiat Ng and Saptari, Adi (2015) Effects Of Pinch Technique, Torque Direction And Sensation On The Pinch Force In Loaded And Unloaded Conditions. Modern Applied Science, 9 (13). pp. 163-175. ISSN 1913-1844

Poh, Kiat Ng and Saptari, Adi and Jian, Ai Yeow (2014) Synthesising The Roles Of Torque And Pinch Force : A Framework. Theoretical Issues In Ergonomics Science, 15 (2). pp. 193-204. ISSN -

Poh, Kiat Ng and Saptari, Adi and Kian, Siong Jee and Tan, Yue Hang (2015) The Effects Of Size On Pinch Force In Loaded And Unloaded Conditions. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 58-67. ISSN 1991-8178

Poh, Kiat Ng and Saptari, Adi and Kian, Siong Jee and Tan, Yue Hang (2015) Torque Direction And Its Influence On Pinch Force In Loaded And Unloaded Conditions. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 73-79. ISSN 1991-8178

Poh, Kiat Ng and Saptari, Adi and Qiao, Hui Boon and Meng, Chauw Bee and Ka, Xuan Chai and Shiong, Lung Leh (2014) Pinch Effort Variations With Torque, Shape And Size, Sensation And Technique. Journal of Applied Sciences, 14 (5). pp. 401-414. ISSN 1812-5654

Putra, Azma and Ab. Latif, Nurain Shyafina and Thompson, David J. and Muhammad, Noryani and Mohd Nor, Mohd Jailani and Nuawi, Zaki (2014) Modelling sound radiation from a baffled vibrating plate for different boundary conditions using an elementary source technique. Inter-Noise And Noise-Con Congress And Conference Proceedings, 249 (-). pp. 5812-5819. ISSN -

Putra, Azma and Abd Khair, Fazlin and Mohd Nor, Mohd Jailani (2015) Utilizing Hollow-Structured Bamboo As Natural Sound Absorber. Archives Of Acoustics, 40 (4). pp. 601-608. ISSN 0137-5075

Putra, Azma and Khai, Hee Or and Selamat, Mohd Zulkefli (2017) Oil Palm Empty Fruit Bunch Fibres As Sustainable Acoustic Absorber. Applied Acoustics, 119. pp. 9-16. ISSN 0003-682X

Qasem Ahmed, Sharif Ahmed and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah (2016) Microstrip Antenna Design With Circular Polarization Property For RF Energy Harvesting Application. International Journal of Applied Engineering Research, 11 (6). 4398 - 4401. ISSN 0973-4562

Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985

Ramlan, Roszaidi and Brennan, Michael John and Mace, Brian and Stephen, Burrow (2012) On the performance of a dual-mode non-linear vibration energy harvesting device. Journal of Intelligent Material Systems, 23 (13). pp. 1423-1432. ISSN 1244-3017

Ramli, Mohd Irman and Nuawi, Mohd Zaki and Abdullah, Samizee and Mohammad Rasani, Mohammad Rasidi and Md Basar, Mohd Farriz and Ahmad, Muhamad Arif Fadli and Kho, Ko Seng (2017) Novel Technique Of Modal Analysis On Small Structure Using Piezoelectric Film Sensor And Accelerometer. ARPN Journal Of Engineering And Applied Sciences, 12 (17). pp. 4902-4912. ISSN 1819-6608

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Ahmad, Muhamad Arif Fadli and Kho, Ko Seng (2017) An Investigation On Light Structure Modal Parameter By Using Experimental Modal Analysis Method Via Piezofilm Sensor. Jurnal Teknologi, 79 (6). pp. 159-165. ISSN 0127-9696

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Kho, Ko Seng and Ahmad, Muhamad Arif Fadli (2017) Novel Technique Of Modal Analysis For Light Structure Via Piezofilm Sensor: A Comparison Study. Jurnal Teknologi, 79 (5-2). pp. 15-20. ISSN 0127-9696

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Mohammad Rasani, Mohammad Rasidi and Abdullah, Sharum and Fadli Ahmad, Muhamad Arif and Abdullah, Muhammad Fazrin (2018) Development Of Polymer Mechanical Properties Characteristics Using I-KAZ 4D Analysis Method. Jurnal Teknologi , 80. pp. 29-40. ISSN 2180-3722

Razak, Muhammad Shahmi and Sulaiman, Mohd Amri and Mat, Siti Asiyah and Ramle, Zuraimi and Mohamad, Effendi and Salleh, Mohd Rizal (2017) The Effect Of Cryogenic Cooling On Surface Roughness Of Titanium Alloy: A Review. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 101-114. ISSN 1985-3157

Razak, Nurul Nadia and Yasin, Moh and Zakaria, Zahriladha and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Q-Switched Fiber Laser With A Tungsten Disulfide Saturable Absorber Prepared By The Drop Casting Method. Photonics Letters Of Poland, 9 (3). pp. 103-105. ISSN 2080-2242

Ridhwan , Jumaidin (2016) Characteristics Of Thermoplastic Sugar Palm Starch/Agar Blend: Thermal,Tensile,And Physical Properties. International Journal Of Biological Macromolecules, 89. 575–581. ISSN 0141-8130

Rosli, Nor Azwar Syahila and Hasan, Rafidah and Ng, Wai Hoe and Baharudin, Muhammad Khairi and Alkahari, Mohd Rizal (2018) Investigation on process-properties relationship with mechanical properties of lattice-structured cellular material for lightweight application. International Journal Of Engineering And Technology (UAE), 7 (3.17). pp. 1-4. ISSN 2227-524X

Rozaimi , Ghazali (2016) Linear And Nonlinear Dynamic Modelling Of Motorized Prosthetic Hand System. Journal of Theoretical and Applied Information Technology, 93 (1). pp. 236-232. ISSN 1992-8645

Sabikan, S. and Nawawi, S.W. (2016) Open-Source Project (OSPs) Platform for Outdoor Quadcopter. Journal of Advanced Research Design, 24 (1). pp. 13-27. ISSN 2289-7984

Saipullah, Khairul Muzzammil (2013) Comparison of Feature Extractors for Real-Time Object Detection on Android Smartphone. Journal of Theoretical and Applied Information Technology . pp. 135-142. ISSN 1992-8645

Saipullah, Khairul Muzzammil (2013) Feature Extraction Method for Classification of Approved Halal Logo in Malaysia using Fractionalized Principle Magnitude. Engineering Management Reviews (EMR), 2 (2). 36 -44 . ISSN 2326-5884

Saipullah, Khairul Muzzammil (2011) The Pruning of Combined Neighborhood Differences Texture Descriptor for Multispectral Image Segmentation. International Journal of Computer Technology and Electronics Engineering, 1 (3). pp. 1-6. ISSN 2249-6343

Saipullah, Khairul Muzzammil (2013) Measuring Power Consumption for Image Processing on Android Smartphone. American Journal of Applied Sciences, 9 (12). 2052 -2057 . ISSN 1546-9239

Saipullah, Khairul Muzzammil (2012) OpenCV Based Real-Time Video Processing Using Android Smartphone. International Journal of Computer Technology and Electronics Engineering, 1 (3). pp. 1-6. ISSN ISSN 2249-6343

Saipullah, Khairul Muzzammil (2011) A Robust Texture Feature Extraction using the Localized Angular Phase. Multimedia Tools and Applications. pp. 717-747. ISSN 1380-7501

Saipullah, Khairul Muzzammil (2012) Target Detection of Hyperspectral Images Based on Their Fourier Spectral Features. Society of Photo-Optical Instrumentation Engineers (SPIE), 51 (11). 111704-1 . ISSN 0091-3286

Saleman, Abdul Rafeq and Abdul Munir, Fudhail and Mohamad Zin, Mohd Rody and Yob, Mohd Shukri and Gota, Kikugawa and Taku, Ohara (2018) Heat Transport At Solid-Liquid Interfaces Between Face-Centered Cubic Lattice And Liquid Alkanes. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 44 (1). pp. 123-130. ISSN 2289-7879

Salim, Mohd Azli and Putra, Azma and Abdullah, Mohd Azman (2014) Mathematical Formulation For Bending Wave In Non-Dispersive Finite Rod. International Review on Modelling & Simulations, 7 (3). pp. 523-530. ISSN 1974-9821

Salim, Mohd Azli and Md. Saad, Adzni and Termiti, Zarif Hasif and Omar, Ghazali (2018) Properties Of Graphene And Its Application On Electronic Industries–A Review. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451

Salim, Mohd Azli and Mokhlis, Maizura and Omar, Ghazali and Rahim, N.A.A and Md. Saad, A. (2018) Investigation On Elasticity Rate Of Silver Nano-Particles-Filled Epoxy Conductive Ink. International Journal Of Advanced Materials Characterization, 1 (1). p. 4. ISSN 2636-9451

Salim, Mohd Azli and Termiti, Zarif Hasif and Md. Saad, Adzni and Omar, Ghazali (2018) Analysis On Stress-Strain Performance Of ABS/PLA Material Used In Geospatial Solution. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Safian, Mohd Azizul Hikmi and Yahaya, Saifudin Hafiz (2016) Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). p. 1. ISSN 1985-3157

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Sajuri, Zainuddin and Alhawari, Khaled Salem (2015) Trend And Development Of Semisolid Metal Joining Processing. Advances in Materials Science and Engineering, 2015. pp. 1-13. ISSN 1687-8434

Salleh, Mohd Shukor and Omar, Mohd Zaidi and Alhawari, Khalid Salim and Mohammed, Mohammed Naser and Md Ali, Mohd Amran and Mohamad, Effendi (2016) Microstructural evolution and mechanical properties of thixoformed A319 alloys containing variable amounts of magnesium. Transactions of Nonferrous Metals Society of China, 26. pp. 2029-2042. ISSN 1003-6326

Salleh, N. and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Salleh, Yahya (2005) Autonomous maintenance - an effective shop- floor tool to improve productivity. Journal of Technology Management and Entrepreneurship, 3 (2). pp. 1-18. ISSN 1675-8404 (Submitted)

Saptari, Adi and Poh, Kiat Ng (2014) A Review Of Shape And Size Considerations In Pinch Grips. Theoretical Issues in Ergonomics Science, 15 (3). pp. 305-317. ISSN 1463-922X

Sarban Singh, Ranjit Singh and Baljit, S.S.S. and Wong, Yan Chiew (2018) Research And Development Of The Hierarchical Switching Charging Discharging System For Continuous Sustainability. Journal of Engineering and Applied Sciences, 12 (7). pp. 8030-8034. ISSN 1816-949X

Se, Sian Meng and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad Juoi, Jariah and Mohd Husin, Mohd Haizal and Mitan, Nona Merry Merpati (2014) Influence of heating temperature and holding time on biochars derived from rubber wood sawdust via slow pyrolysis. Journal of Analytical and Applied Pyrolysis, 107. 31- 39. ISSN 0165-2370

Seemork, Jiraporn and Sako, Takumi and Md Ali, Mohd Amran and Yamaguchi, Masayuki (2017) Rheological Response Under Nonisothermal Stretching For Immiscible Blends Of Isotactic Polypropylene And Acrylate Polymer. Journal Of Rheology, 61 (1). pp. 1-11. ISSN 0148-6055

Selamat, Mohd Zulkefli and Ahmad, Mohd Sakir and Mohd Daud, Mohd Ahadlin and Ahmad, Narisa (2013) Effect of Carbon Nanotubes on Properties of Graphite/Carbon Black/Polypropylene Nanocomposites. Advanced Materials Research, 795 (2013). pp. 29-34. ISSN 10.4028/www.scientific.net/AMR.795.29

Selamat, Mohd Zulkefli and Sahadan, Siti Norbaya and Dhar Malingam, Sivakumar and Sudiana, Yayan and Mohamad, Noraiham (2017) Epoxy/carbon black/graphite composite bipolar plate prepared by high speed mixing technique. Proceedings Of Mechanical Engineering Research Day 2017. pp. 410-412. ISSN -

Shaaban, Azizah and Mohamad Yatim, Norazlina and Dimin @ Mohd Amin, Mohd Fairuz and Yusof, Faridah and Abd Razak, Jeefferie (2017) Multiwalled carbon nanotubes enhancing nitrogen uptake and use efficiency of urea fertlizer by paddy. Jurnal Teknologi, 79 (5-2). pp. 105-109. ISSN 0127-9696

Shair, Ezreen Farina and Khor, Shen Young and Abdullah, Abdul Rahim and Jaafar, Hazriq Izzuan and Mohd Ali, Nursabillilah and Zainal Abidin, Amar Faiz (2014) A Brief Review of Cuckoo Search Algorithm (CSA) Research Progression from 2010 to 2013. International Review of Automatic Control (I.RE.A.CO.), 7 (5). pp. 428-435. ISSN 1974-6059

Sheikh Md Fadzullah, Siti Hajar and Ifayefunmi, Olawale Friday and Mustafa, Zaleha and Omar, Ghazali and Mansor, Muhd Ridzuan (2017) Perforation Behaviour Of Composites Sandwich Structures On Low-Velocity Impact At Oblique Angles. International Journal Of Automotive And Mechanical Engineering (IJAME), 14 (2). pp. 4158-4170. ISSN 2229-8649

Shueb, Mohammed Iqbal and Abd Manaf, Mohd Edeerozey and Ratnam, Chantara Thevy and Mohamad, Noraiham (2017) Influence Of Sonication Assisted Dispersion Method On The Mechanical And Electrical Properties Of Nylon 66/Nano-Copper Nanocomposite. Jurnal Teknologi, 79 (5-2). pp. 77-81. ISSN 0127-9696

Shuhimi, Fairuz Fazillah and Abdollah, Mohd Fadzli and Kalam, M.A. and Masjuki, Hassan and Mustafa, Ashafi’e and Mat Kamal, Sushella Edayu and Amiruddin, Hilmi (2017) Effect Of Operating Parameters And Chemical Treatment On The Tribological Performance Of Natural Fiber Composites : A Review. Particulate Science And Technology, 35 (5). pp. 512-524. ISSN 0272-6351

Sidek, Safiah and Kamalrudin, Massila and Daud, Nadiah (2017) Eliciting functional requirements in clinical domain: a review. International Research Journal of Engineering and Technology (IRJET), 4 (6). pp. 1661-1665. ISSN 2395-0072

Sihombing, Haeryip and M.Y., Yuhazri and A.Razak, Jeefferie and P., Perumal and Akbar, Habibulah (2012) Real of Simply Assembly Line Balancing using Fact-Model. International Journal of Computer and Electrical Engineering, 4 (6). pp. 870-874. ISSN 1793-8163

Sihombing, Haeryip and Rassiah, Kannan and Ashaari, Zaini and M.Y., Yuhazri (2012) An Analysis and Development of Recycled Materials for Wood Plastic Composite Product. Elixir Mechanical Engineering, 51. pp. 10834-10840. ISSN 2229-712X

Sivakumar, Dhar Malingam (2012) Application of Total Productive Maintenance to Reduce Non-Stick on Pad Problem in IC Packaging. International Journal of Engineering and Science, 3 (1). pp. 14-32. ISSN 2086-3799

Subramonian, Sivarao and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Raja Abdullah, Raja Izamshah and Anand, T Joseph Sahaya (2015) Micro-Drilling Of Silicon Wafer By Industrial CO2 Laser. International Journal of Mechanical and Materials Engineering , 10 (2). pp. 1-6. ISSN -

Suhaimi, Misha (2013) The CFD simulation of tray dryer design for kenaf core drying. Applied Mechanics and Materials. pp. 717-722. ISSN 1660-9336

Suhaimi, Misha (2014) Comparison Between 2D and 3D Simulations of a Tray Dryer System Using CFD Software. World Applied Sciences Journal, 29 (10). pp. 1301-1309. ISSN 1818-4952

Suhaimi, Misha (2013) Review on the Application of a Tray Dryer System for Agricultural Products. World Applied Sciences Journal, 22 (3). pp. 424-433. ISSN 1818-4952

Suhaimi, Misha (2012) Review of solid/liquid desiccant in the drying applications and its regeneration methods. RENEWABLE & SUSTAINABLE ENERGY, 16. pp. 4686-4707. ISSN 1364-0321

Suhaimi , Misha (2013) The Prediction of Drying Uniformity in Tray Dryer System using CFD Simulation. International Journal of Machine Learning and Computing, 3 (5). pp. 419-423. ISSN 2010-3700

Sukri, Mohamad Firdaus and Jamali, Mohamad Khairulazahar (2018) Economic Analysis Of An Inverter And Non-Inverter Type Split Unit Air-Conditioners For Household Application. ARPN Journal Of Engineering And Applied Sciences, 13 (11). pp. 3749-3757. ISSN 1819-6608

Sulaiman, Marizan and Mohamad Nor, Ahmad Fateh and Ammar, Naji (2018) Long –Term Load Forecasting Of Power Systems Using Artificial Neural Network And Anfis. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 828-834. ISSN 1819-6608

Syed Salim , Syed Najib and Rahmat, Mohd Fua’ad and Mohd Faudzi, Ahmad ’Athif and Ismail, Zool H. and Sunar, Noorhazirah (2014) Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. Position Control of Pneumatic Actuator Using Self-Regulation Nonlinear PID. pp. 1-12. ISSN 1024-123X

T. Subramaniam, Ramesh and Karuppiah, Rajammal and Kasi, Ramesh and Dhar Malingam, Sivakumar and Duraisamy, Navaneethan (2017) Influences of sintering temperatures and crystallite sizes on electrochemical properties of LiNiPO4 as cathode materials via sol–gel route for lithium ion batteries. Journal of Sol-Gel Science and Technology, 83 (1). pp. 12-18. ISSN 0928-0707

Talib, Elyas and Lau, Kok Tee and Zainal Abidin, Muhammad Zaimi and Bistamam, Mohd Shahril Amin and Abdul Manaf, Nor Syafira and Raja Seman, Raja Noor Amalina and Zulkapli, Nor Najihah and Mohd Abid, Mohd Asyadi 'Azam (2015) Electrochemical performance of multi walled carbon nanotube and graphene composite films using electrophoretic deposition technique. Applied Mechanics And Materials, 761. pp. 468-472. ISSN 1662-7482

Tan, CheeFai (2013) The Self-Reported Seat Discomfort Survey on Economy Class Aircraft Passenger in the Netherlands. Australian Journal of Basic and Applied Sciences. pp. 563-570. ISSN 1991-8178

Tan, CheeFai and Tean, Z.Y. and Said, M.R. and Khalil, S.N. and Sudin, M.N. and Karjanto, Juffrizal and Yusof, N.M. and Sivarao, Subramonian (2013) Conceptual design of cantilever support for long haul bus passenger seat. Australian Journal of Basic and Applied Sciences. pp. 383-387. ISSN 1991-8178

Tan, Chee Fai and Sarban Singh, Ranjit Singh and Karjanto, Juffrizal and Md. Yusof, Nidzamuddin and Khalil, Siti Nurhaida and Dhar Malingam, Sivakumar and E.S. Ng and Chen, Wei and Rauterberg, Matthias and Lim, Danny Thiam Lai (2013) Conceptual design for multi terrain mobile robot. Australian Journal of Basic and Applied Sciences, 7 (12). pp. 300-308. ISSN 1991-8178

Taufik, Afirah and Syed Ahmad, Sharifah Sakinah and Ahmad, Asmala (2016) Classification Of Landsat 8 Satellite Data Using NDVI Thresholds. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 37-40. ISSN 2180-1843

Taufiq, M.J. and Mustafa, Zaleha and Mansor, Muhd Ridzuan (2017) Utilisation Of Recycled Thermoplastics Sourced From Rejected-Unused Disposable Diapers As Polymer Blends. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3137-3143. ISSN 2289-4659

Yaakob, Mohd Yuhazri and K. M., Hafiz and Y. Z. A., Myia and Jia, C. P. and Sihombing, Haeryip and Salit, Mohd Sapuan and Badarulzaman, Nur Azam (2017) Evaluation on compression properties of different shape and perforated rHDPE in concrete structures. Journal Of Physics: Conference Series, 914 (1). pp. 1-8. ISSN 1742-6588

Yaakob, Mohd Yuhazri and Sihombing, Haeryip and Perumal, Puvanasvaran (2012) Study of the Optimum Condition Towards the Inducing Paraffin Wax LDPE. International Journal of Engineering & Technology IJET-IJENS, 10 (4). pp. 9-12.

Yahaya, Saifudin Hafiz and W. N., Hidayah and Salleh, Mohd Shukor and Abdullah, Abu and H., Sihombing (2018) Customer Preferences In Car Design Using Kansei Engineering And Cubic Bezier Curve. International Journal Of Engineering & Technology, 7 (4). pp. 4170-4173. ISSN 2227-524X

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Mathematical function optimization using AIS antibody remainder method. International Journal of Machine Learning and Computing, 1 (1). pp. 13-19. ISSN 2010-3700

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) A swarm based artificial immune systems for solving multimodal functions. Applied Artificial Intelligence, 25 (8). pp. 693-707. ISSN 0883-9514

Yap, David F. W. (2012) An Adaptive Immune Algorithm based Gravimetric Fluid Dispensing Machine. Journal of King Saud University - Computer and Information Sciences, 24. pp. 49-57. ISSN 1319-1578

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Artificial Immune System Based Remainder Method for Multimodal Mathematical Function Optimization. World Applied Sciences Journal, 14 (10). pp. 1507-1514. ISSN 1818-4952

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) A hybrid artificial immune systems for multimodal function optimization and its application in engineering problem. Artif. Intell. Rev., Online (Online). ISSN 0269-2821

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Prajindra, S. K. (2011) Particle Swarm based Artificial Immune System for Multimodal Function Optimization and Engineering Application Problem. Trends in Applied Sciences Research, 6 (3). pp. 282-293. ISSN 1819-3579

Zainal, Zairulazha and Ramli, Rizauddin and Mustafa, Mohd Marzuki (2013) Grey-Level Cooccurrence Matrix Performance Evaluation For Heading Angle Estimation Of Moveable Vision System In Static Environment. Journal Of Sensors, 2013. pp. 1-6. ISSN 1687-725X

Zainal, Zairulazha and Ramli, Rizauddin and Mustafa, Mohd Marzuki (2012) Improved Heading Direction Interpretation Via Optical Flow Using Selected Region Of Interest. Procedia Engineering, 41. pp. 1298-1306. ISSN 1877-7058

Zainal, Zairulazha and Ramli, Rizauddin and Mustafa , Mohd Marzuki (2015) Angle Discrete Interval Selection Technique (ADIST) On Optical Flow Vectors In Estimating Orientation Of Vision System. ICIC Express Letters,Part B: Applications, 6. pp. 817-822. ISSN 2185-2766

Zainal Abidin, Amar Faiz and Mohd Ali, Nursabillilah and Mat Zain, Norlina and Abdul Majid, Masmaria and Rifin, Rozi and Kadiran, Kamaru Adzha and Mohd Mokji, Ahmad Musa and Tan, Kok and Amirulah, Rahman (2018) A Study On The Application Of Gravitational Search Algorithm In Optimizing Stereo Matching Algorithm’s Parameters For Star Fruit Inspection System. ARPN Journal Of Engineering And Applied Sciences, 13 (4). pp. 1212-1217. ISSN 1819-6608

Zainal Abidin, Muhammad Zaimi and Kazuhiko, Noda (2014) Effect Of Coating Thickness On Corrosion Behavior Of Electroless Quaternary Nickel Alloy Deposit In 3.5 wt% NaCl Solutions. Journal Of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 83-92. ISSN 1985-3157

Zainal Abidin, Muhammad Zaimi and Mohd Abid, Mohd Asyadi 'Azam and Sofian, Azizul Helmi and Kazuhiko, Noda (2015) Electrochemical Impedance Behavior Of Various Composition Quaternary Ni Alloy In 3.5 wt% NaCl. Applied Mechanics And Materials, 761. pp. 407-411. ISSN 1662-7482

Zainal Abidin, Muhammad Zaimi and Azran, Mohd Nor and Muhamad, Khaizaki and M., Alifd and Abdul Aziz, Mohd Sanusi and Azam, Mohd Asyadi and Kasim, Mohd Shahir and Munawar, Rose Farahiyan and Abd Manaf, Mohd Edeerozey (2016) Electroless Ni-Co-Cu-P Alloy Deposition In Alkaline Hypophosphite Based Bath. Key Engineering Materials, 694. pp. 151-154. ISSN 1662-9795

Zainal Abidin, Muhammad Zaimi and Mohd Rosli, Zulkifli and Mohamad Juoi, Jariah and Mahamud, Zainab (2015) Nanocomposite TiAlBN Coatings As A Corrosion Protection Layer For AZ91 Mg Alloy Substrate In NaCl. Materials Science Forum, 819. pp. 109-114. ISSN 1662-9752

Zainal Abidin, Muhammad Zaimi and Zulkifli, Mohd Rosli and Mohamad Juoi, Jariah and Mahamud, Zainab (2015) Corrosion Performance Of Nitrided Based Coating On AZ91 Mg Alloy In Hank’s Solution. Materials Science Forum, 819. pp. 303-308. ISSN 0255-5476

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Hashim, Nurul Akmal and Ahmad, Rabiah and A. Perumal, Puvanasvaran (2018) Risk Assessment Method For Insider Threats In Cyber Security : A Review. International Journal Of Advanced Computer Science And Applications, 9 (11). pp. 126-130. ISSN 2156-5570

Zakaria, Kamarul Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Ali, Mohd Basri (2016) Influence Of Elevated Temperature On The Fatigue Fracture Surface Hardness Of AA6061. Journal of Engineering and Applied Sciences, 11 (10). pp. 2130-2135. ISSN 1816-949X

Zakaria, Kamarul Ariffin and Ad Suhadak, Fadrah Hanim and Ali, Mohd Basri and Abdullah, S. and Ghazali, Mariyam Jameelah (2017) Influence Of Mechanical Properties On Load Sequence Effect And Fatigue Life Of Aluminium Alloy. Journal of Mechanical Engineering and Sciences (JMES), 11 (1). pp. 2467-2477. ISSN 2289-4659

Zakaria, Kamarul Ariffin and Idris, Mohamad Iqmal Faris and Dhar Malingam, Sivakumar and Salleh, Suhaila and Sanusi, Nortazi and Mohd Daud, Mohd Ahadlin (2018) Fatigue strain signal characteristic and damage of automobile suspension system. ARPN Journal of Engineering and Applied Sciences, 13 (1). pp. 221-225. ISSN 1819-6608

Zakaria, Kamarul Ariffin and Jimit, Roy Hanson and Ramli , S.N.R. and Abdul Aziz, Azizuddin and Bapokutty, Omar and Ali, Mohd Basri (2016) Study on fatigue life and fracture behaviour of fibreglass reinforced composites. Journal of Mechanical Engineering and Sciences (JMES), 10 (3). pp. 2300-2310. ISSN 2289-4659

Zulkafli, Nur Izyan and Mahadzir, Shuhaimi and Muhammad, Noryani and Abdul Hadi, Dayanasari (2014) MINLP Model for Simultaneous Scheduling and Retrofit of Refinery Preheat Train. International Journal of Energy and Environment, 5 (2). pp. 197-206. ISSN 2076-2909

Zulkefli, M. H. and Mohd Annuar, K. A. and Johari, S. H. and Mohamad Sapiee, M. R. and Ahmad, S. (2015) Graphical User Interface (GUI) Controlled Mobile Robot. Journal of Advanced Research in Computing and Applications, 1 (1). pp. 43-50. ISSN 2462-1927

ahmad kamely, mohamad and mohd yusuf, noordin (2011) The Impact of Cutting Tool Materials on Cutting Force. World Academy of Science, Engineering and Technology, 75. pp. 904-907. ISSN 1307-6884

syed mohamed, muhammad syafiq and Ze Mei, Chiang and Hui Hui, Yee (2013) Ergonomics Evaluation on Non Keyboard Input Devices. Universal Journal of Management and Social Sciences, 3 (9). pp. 65-69. ISSN 2226-6240

Book Chapter

UNSPECIFIED (2022) Advanced smart materials composite in IR 4.0 application. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 25-36. ISBN 9789672792321

UNSPECIFIED (2022) Electrically Conductive Adhesives (ECAs) composites in biomedical device application. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 1-24. ISBN 9789672792321

UNSPECIFIED (2022) Fatigue of rubber composites with organic and inorganic particulates fillers. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 65-72. ISBN 9789672792321

UNSPECIFIED (2022) Hybrid nanofluid flow in a three dimensional system. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 87-98. ISBN 9789672792321

UNSPECIFIED (2022) Mathematical model for crack problems in bonded dissimilar materials. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 73-86. ISBN 9789672792321

UNSPECIFIED (2022) Natural rubber-based green nanocomposites in automotive engineering. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 49-64. ISBN 9789672792321

UNSPECIFIED (2022) Recent development of laser surface texturing in enhancing surface properties. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 131-142. ISBN 9789672792321

UNSPECIFIED (2022) Synthesis and deposition of Ag-TiO2 coating on ceramic tiles. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 37-48. ISBN 9789672792321

UNSPECIFIED (2022) Thixoformability of Al-Si-Cu-Mg alloys for semisolid metal processing. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 117-130. ISBN 9789672792321

UNSPECIFIED (2022) Titanium dioxide coating prepared by thermal spray process for photocatalytic applications. In: UNSPECIFIED, (ed.) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka, pp. 99-116. ISBN 9789672792321

Jaya Kumar, Yogan and Fong , Jia Kang and Ong , Sing Goh and Khan, Atif (2017) Text Summarization Based On Classification Using ANFIS. In: Advanced Topics In Intelligent Information And Database Systems. Springer, pp. 405-417. ISBN 9783319566603

Mansor, Muhd Ridzuan and Akop, Mohd Zaid and Sapuan, S.M. and Mohd Tahir, Musthafah and Salim, Mohd Azli and Shaharuzaman, Mohd Adrinata (2006) Concurrent Design Of Green Composites. In: Green Approaches To Biocomposite Materials Science And Engineering. IGI Global, pp. 48-51. ISBN 9781522504245

Misha, Suhaimi and Mat, Sohif and Mohd Rosli, Mohd Afzanizam and Ruslan, Mohd Hafidz and Sopian, Kamaruzzaman and Salleh, Elias @ Ilias (2015) Simulation of air flow distribution in a tray dryer by CFD. In: Recent Advances in Renewable Energy Sources. WSEAS Press, pp. 29-34. ISBN 978-1-61804-303-0

Misha, Suhaimi and Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Ruslan, Mohd Hafidz and Salleh, Elias @ Ilias and Sopian, Kamaruzzaman (2014) Performance test of solar assisted solid desiccant dryer. In: Computer Applications in Environmental Sciences and Renewable Energy. WSEAS Press, pp. 174-180. ISBN 9789604743704

Mustafa, Zaleha B. and Tanner, K.E (2012) Composites for hard tissue repair. In: Wiley Encyclopedia of Composites. John Wiley & Sons, Inc., pp. 1-14.

Pratama, Satrya Fajri and Draman @ Muda, Azah Kamilah and Choo, Yun Huoy and Draman @ Muda, Noor Azilah (2014) A new swarm-based framework for handwritten authorship identification in forensic document analysis. In: Computational Intelligence In Digital Forensics : Forensic Investigation And Applications. Studies in Computational Intelligence, 555 . Springer International Publishing, Switzerland, pp. 385-411. ISBN 9783319058849

Sivarao, Subramonian (2009) Neural Network Multi Layer Perceptron Modeling For Surface Quality Prediction in Laser Machining. In: Application of Machine Learning. In-Tech Publication-Austria, Austria, pp. 51-61. ISBN 978-953-307-035-3

Suhaimi, Misha (2013) Comparison of CFD Simulation on Tray Dryer System Between Porous and Solid Product. In: Latest Trends in Renewable Energy & Environmental Informatics. WSEAS Press, pp. 59-64. ISBN 978-1-61804-175-3

Sukor, Nooraziera Akmal and Draman @ Muda, Azah Kamilah and Draman @ Muda, Noor Azilah (2014) A Comparative Study Of Treebased Structure Methods For Handwriting Identification Springer. In: Proceedings Of The First International Conference On Advanced Data And Information Engineering (Daeng-2013) - Springer. Lecture Notes in Electrical Engineering, 285 . Springer, Singapore, pp. 269-276. ISBN 9789814585170

Wang, Chenqing and Abdul Rahman, Azrul Azwan and Seliger, Günther (2012) A Case Study: Feasibility and economic analysis for advanced automation in spoke rim assembly for motorcycle towards sustainability. In: Sustainable Manufacturing - Shaping Global Value Creation. Springer Berlin Heidelberg, pp. 387-392. ISBN 978-3-642-27289-9

Conference or Workshop Item

Ab Rahman, Mohd Fauzi and Kok, Swee Leong (2012) Investigation of useful ambient vibration sources for the application of energy harvesting. In: 2011 IEEE Student Conference on Research and Development, 19-20 December 2011, Cyberjaya. (Submitted)

Ab Rashid, Mohd Zamzuri and Mohd Aras, Mohd Shahrieel and Mohd Shah, Hairol Nizam and Lim , Wee Teck and Ibrahim, Zulkifilie (2012) Design and System Parameter’s Validation of the Unicycle Mobile Robot. In: First International Conference on Control, Automation and Information Sciences (ICCAIS 2012), November 26-29, 2012, Grand Hotel Saigon, ho chi minh vietnam.

Abd. Rahman, Md. Nizam and Abdullah, Rohana (2012) WORK STUDY TECHNIQUES EVALUATION AT BACK-END SEMICONDUCTOR MANUFACTURING. In: International Conference on Design and Concurrent Engineering, 15-16 Okt 2012, Bandar Melaka, Melaka.

Abdul Rahman, Azrul Azwan and Bilge, Pinar and Seliger, Günther (2011) Simulation Aided Development of Alternatives for Improved Maintenance Network. In: 7th International Conference on Digital Enterprise Technology, 28-30 September 2011, Athens, Greece.

Abdul Rahman, Azrul Azwan and Kernbaum, Sebastian (2007) Simulation Based Control System for a Manufacturing System. In: Conference on Application and Design in Mechanical Engineering, 25-26 Ocktober 2007, Perlis.

Abdul Rahman, Azrul Azwan and Seliger, Günther (2011) Simulation as a tool in Self Adaptive Control for Flexible Assembly Systems. In: The 44th CIRP Conference on Manufacturing Systems, 31.5.2011 - 3.6.2011, Madison, Wisconsin, USA.

Abdullah, Lokman and Jamaludin, Zamberi and RAFAN, NUR AIDAWATY and Jamaludin, Jailani and Tsung Heng, Chiew (2013) Assessment on tracking error performance of Cascade P/PI, NPID and N-Cascade controller for precise positioning of xy table ballscrew drive system. In: International Confernce on Mechatronics (ICOM 2013), 2 - 4 July 2013, Vistana Hotel Kuala Lumpur, Malaysia.

Abdullah, Rohana and Ahmad, Nurul Huda (2010) Development of Automated Maynard Operation Sequence TEchnique (MOST) Work Study Technique: Case Study at Aerospace Manufacturing Company Using Lean Six Sigma. In: 3rd International Conference on Science and Technology: Applications in Industry and Education, 16-17 Dec 2010, The Gurney Resort Hotel and Residence, Penang.

Abdullah, Lokman and Jamaludin, Zamberi and Salleh, Mohd Rizal and Abu Bakar, Baharudin and Maslan, Mohd Nazmin and Tsung Heng, Chiew and RAFAN, NUR AIDAWATY (2013) Design and Analysis of Self-tuned Nonlinear PID Controller for XY Table Ballscrew Drive System. In: 2nd International Symposium on Computer, Communication, Control and Automation (3CA 2013), 1 - 2 December 2013, Holiday Inn Atrium, Singapore.

Abdullah, Rohana and Mohamad, Effendi and Mohamad, Nor Akramin and Saptari, Adi (2009) Productivity Analysis Towards Lean Manufacturing at a Textile Manufacturing Company. In: Malaysian Technical Universities Conference on Engineering and Technology 2009, 20-22 June 2009, MS Garden Hotel, Kuantan, Pahang.

Abdullah, Rohana and Mohamad, Effendi and Muhamad, Mohd Razali (2008) Managing Key Performance Indicators (KPIs): A Case Study at an Aerospace Manufacturing Facility. In: Knowledge Management International Conference 2008, 10-12 June 2008, Langkawi, Malaysia.

Abdullah, Rohana and Mohamad, Nor Akramin and Abdul Rahman, Mohd Soufhwee (2011) Design and Development of Material Requirement Planning (MRP)Tool for an Electronic Product Manufacturer. In: Malaysian Technical Universities International Conference on Engineering & Technology (MUiCET 2011), 13-15 November 2011, UTHM, Batu Pahat, Johor.

Abdullah, Rohana and Saptari, Adi and mohamad, Nor Akramin (2010) Manpower Optimization and Process Efficiency Improvement at a Textile Manufacturing Company. In: Waset 2010, 24-26 Feb 2010, Bayview Hotel, Georgetown, Penang.

Abdullah, Zulkeflee (2006) Designing an Auto Retractable, Manual Retractable & Permanent Car Cover to Provide Shelter from Heat & Rain during Moving & Stationary (Parking). In: Seminar Pencapaian Penyelidikan KUTKM 2006, 2006, KUTKM, Melaka.

Abu, Nur Azman and Siaw Lang, Wong and Shahrin, Sahib (2010) Image Projection Over The Edge. In: Second International Conference on Computer and Network Technology, -, -. (Submitted)

Ahmad Nizam, Mohd Jahari and Shahrum Shah, Abdullah and Khairul Azha, A. Aziz (2010) Vertical motion controller design of an underwater vehicle. In: 3rd International Conference on Underwater System Technology: Theory and Applications 2010 (USYS'10), 1st & 2nd November 2010, Cyberjaya.

Anuar , Mohamed Kassim (2010) Moving Control of Quadruped Hopping Robot Using Adaptive CPG Networks. In: 2010 IEEE Conference on Robotics Automation and Mechatronics (RAM), , June 28-30 , 2010, Singapore.

Asyadi Azam, Mohd and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko and Shimoda, Tatsuya (2010) Controlling the growth of vertically aligned single walled carbon nanotubes from ethanol for electrochemical supercapacitor application. In: 8th International Symposium on New Materials for Electrochemical Systems, 11-15 July 2010, Shanghai, China.

Asyadi Azam, Mohd and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko (2010) Controlling the growth of single-walled carbon nanotubes using alcohol catalytic CVD method. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Asyadi Azam, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Aluminum Oxide Support Layer for Vertical Growth of Single Walled Carbon Nanotube using Alcohol Catalytic CVD Technique. In: The Fifth International Conference on Advanced Materials and Nanotechnology (AMN-5), 5-13 February 2011, Wellington Convention Centre, Wellington, New Zealand.

Asyadi Azan, Mohd and Fujiwara, Akihiko and Shimoda, Tatsuya (2011) Directly grown vertically aligned single-walled CNTs on conducting substrate as electrode material for electrochemical capacitor. In: 219th Electrochemical Society Meeting, 1-8 May 2011, The Montreal Convention Center (Palais des Congrès de Montréal), Montreal, Quebec, Canada.

Azmi, M.N and Saleman, Abdul Rafeq and Razali, Nadlene and Mohd Azmi, Mohd Irwan and Aishah, A.M. (2012) Tensile And Hardness Properties Of Kenaf-Pp/Pla Composite Filled Nanoclay. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Azmi, Mohd Sanusi and Muda, A. K. (2011) Digital Paleography: Using the Digital Representation of Jawi Manuscripts to Support Paleographic Analysis. In: IEEE - 2011 International Conference on Pattern Analysis and Intelligent Robotics, 28-29 June 2011, Putrajaya, Malaysia.

Bakar, Norasiken and Ishak, Norshahidatul Hasana and Md Lani, Shahdan (2012) Analysis on using 3D approach in learning for electromagnetic theory (3D-EmT). In: International Call On Active Learning 2012, 18/9/2012 - 20/9/2012, UTeM.

Basar, Mohd Farriz and Mohamad Sapiee, Mohd Razali and Hishamudin and Zakaria and Yusof, N.M and Wahid, N. (2010) A Study on the Wind and Geothermal as a Potential of Renewable Energy Sources in Malaysia. In: ICEI2010 - THE 2ND INTERNATIONAL CONFERENCE ON ENGINEERING AND ICT, 18-20th February 2010 , Melaka.

Dharmalingam, Sugumar and KalyanaSundaram, Shankar (2012) Forming analysis of self-reinforced polypropylene based composite-aluminium hybrid structures. In: 3rd International Conference on Engineering & ICT (ICEI 2012) , 4-6 April 2012, Mahkota Hotel, Melaka.

Din, Abdul Talib and Mohd Zaidi, Zairul Fazura (2011) The study on the soil heat transfer characteristics for the development of a cost-saving underground air cooling system. In: The 5th PSU-UNS International Conference on Engineering and Technology (ICET-2011), 2 , 3 May 2011, Phuket, Thailand.

Draman @ Muda, Azah Kamilah and Shamsuddin, Siti Mariyam and Darus, Maslina (2007) Embedded scale united moment invariant for identification of handwriting individuality. In: International Conference on Computational Science and Its Applications - ICCSA 2007, Kuala Lumpur, Malaysia.

Draman @ Muda, Azah Kamilah and Shamsuddin, Siti Mariyam and Darus, Maslina (2008) Invariants discretization for individuality representation in handwritten authorship. In: 2nd International Workshop on Computational Forensics - IWCF2008, 7 - August, 2008, Washington DC, .

Draman @ Muda, Azah Kamilah and Shamsuddin, Siti Maryam and Darus, Maslina (2008) Discretization of integrated moment invariants for writer identification. In: International Conference on Advances in Computer Science and Technology ACST2008, 2 - 4 April, 2008, Langkawi, Malaysia.

Fauziyah, Salehuddin and Mardiana, Bidin and Hazura, Haroon and Zahariah, Manap (2009) Online Signature Verification System. In: Signal Processing & Its Applications, 2009. CSPA 2009. 5th International Colloquium on, 6-8 March 2009, Kuala Lumpur, Malaysia.

Fleschutz, Timo and Abdul Rahman, Azrul Azwan and Harms, Robert and Seliger, Günther (2010) Assessment of Life Cycle Impacts and Integrated Evaluation Concept for Equipment Investment. In: 17th CIRP International Conference on Life Cycle Engineering (LCE 2010), 19-21 May 2010, Hefei, Republic of China.

Gannapathy, Vigneswara Rao and Suaidi, Mohd Kadim and Johal, Muhammad Syahrir and Fayeez, Ahamed Tuani Ibrahim and Siva Kumar, Subramaniam and Ranjit, S.S.S. (2012) An Efficient Medium Access Control (MAC) Forwarding Technique for Multihop Network. In: PSU-USM International Conference on Art and Sciences 2012, 2nd - 4th December 2012, Bay View Resort, Penang.

Gannapathy, Vigneswara Rao and Subramaniam, Siva Kumar and Esro, Mazran and Sarban Singh, Ranjit Singh and Suaidi, Mohamad Kadim (2012) Intelligent health monitoring system (IHMS) using wireless ZigBee technology. In: Prosiding Seminar Hasil Penyelidikan Kementerian Pengajian Tinggi Jilid III ICT dan Kejuruteraan, 8th to 9th November 2012, AKEPT, Bandar Enstek.

Habibullah, Akbar and Anton Satria, Prabuwono (2008) Automated visual inspection (AVI) research for quality control in metal stamping manufacturing. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), 17 - 19 November 2008, UNITEN, Malaysia. (Submitted)

Hamzah, Rostam Affendi and Salleh, Azahari and A Aziz, Khairul Azha and Mohammed Napiah, Zul Atfyi Fauzan (2011) A Pixel Matching Process And Multiples Roi For Stereo Images In Stereo Vision Application. In: IEEE 3rd International Conference on Communication Software and Networks, ICCSN 2011, 1-3 April 2011, Bali, Indonesia. (Submitted)

Harun, Mohamad Haniff and Sulaiman , Marizan and Hairol Nizam , Mohd Shah (2011) Shape-Based Matching: Application of Defect Detection. In: Proceesings of Malaysian Technical Universities International Conference on Engineering and Technology (MUICeT 2011), 13-15 November 2011, Batu Pahat, Johor.

Harun, Mohamad Haniff and Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2011) Shape-Based Matching: Application of Edge Detection using Harris Point. In: Proceedings of International Conference on Robotic Automation System (ICORAS 2011), 23-24 May 2011, Kemaman, Terengganu.

Hashim, Hanizam and Md Nizam, Abd Rahman and Noraiham, Mohamad and Hassan, Attan and Mohd Soufhwee, Abd Rahman (2012) Nitrogen Gas Partial Pressure Control Effects on Titanium Nitride Coating’s Thickness and Colour over Tungsten Carbide Substrate using PVD. In: IDECON2012, 15-16 October 2012, Melaka.

Hashim, Norlezah (2010) A Study Of Technology Acceptance Model (Tam) Towards Continuous Professional Development (Cpd). In: International Conference on Lifelong Learning 2011 (ICLLL2011), 14-15 November 2011, Seri Pacific Hotel, Kuala Lumpur . (Submitted)

Hussin, Burairah (2007) Lifetime Distribution With a Limited Failure in Condition Based Maintenance: A Case Study. In: International Conference on Engineering and ICT (ICEI 2007), 27-28 November 2007, Hotel Equatorial Melaka.

Isa , Halim and Kamat, Seri Rahayu and Adi , Saptari and Wan Hasrulnizzam , Wan Mahmood (2007) Assessment Of Workstation Design For Safe Working Posture At Plug Assembly Line. In: International Conference on Engineering and JCT (ICEI 2007), 27 - 28 Nov 2007, Hotel Equatorial Melaka.

Ismail, Mohd Khairir and SAID, MD RADZAI (2012) The Characteristics Of Load Versus Displacement Of Paper Honeycomb : An Experimental Investigation. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Ito, Teruaki and Mohamad, Effendi and Salleh, Mohd Rizal (2013) A Student Mobility Program through Cross Cultural and Technical Exposure. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Jenal, Ruztamreen and Abdullah, Mohd Azman and J. Staszewski, Wieslaw (2012) Fatigue Crack Detection Using Nonlinear Acoustic-Analysis Of Vibro-Acoustic Modulation. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Lim , Wee Teck and Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2009) Flexible Approach for Region of Interest Creation for Shape-Based Matching in Vision System. In: Conference on Innovative Technologies in Intelligent Systems and Industrial Applications (CITISIA 2009), 25th & 26th July 2009, Monash University, Sunway campus, Malaysia.

Low , Yin Fen (2011) Assessment of Cortical Inhibition in Adult Attention-Deficit/Hyperactivity Disorder by Paired-Chirp Auditory Evoked Potentials. In: 5th International IEEE/EMBS Conference on Neural Engineering, 27 April -1 May 2011, Cancun, Mexico.

Low , Yin Fen (2011) A Performance Study of the Wavelet-Phase Stability in the Quantification of Neural Correlates of Auditory Selective Attention. In: The 5th International IEEE EMBS Conference on Neural Engineering, April 27 - May 1, 2011, Cancun, Mexico.

M. R., Sapiee and Abdullah, F. and Noordin, A. and Jahari, A. N. (2008) PI Controller Design Using Model Reference Adaptive Control Approaches For A Chemical Process. In: 2008 Student Conference on Research and Development (SCOReD 2008) , 26-27 Nov. 2008, UTM, Johor.

M. R., Sapiee and Sudin, Shahdan (2009) Road Vehicle Following System with Adaptive Controller Gain Using Model Reference Adaptive Control Method. In: The Second International Conference on Control, Instrumentation and Mechatronic Engineering (CIM09), June 2-3, 2009, Melaka.

Mardiana, Bidin and Hanim, Abdul Razak and Haroon, Hazura and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2010) Electro-Optical Modulator Performance in SOl. In: International Conference on Enabling Science and Nanotechnology (ESciNano), 1-3 Disember, 2010, KLCC.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Menon, P.S and Abdullah, H. (2010) Operation mode of phase modulation based on carrier dispersion effect in p-i-n diode of silicon rib waveguide. In: IEEE International Conference on Semiconductor Electronics (ICSE 2010), 28-30 Jun 2010, Melaka.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Abdullah, H. (2010) Phase modulator based on Silicon-on-Insulator (SOI) rib waveguide. In: International Conference on Photonics (ICP) 2010 , 5-7 Julai, 2010, Pulau Langkawi.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Abdullah, H. (2010) Various Doping Concentration Effect on Silicon-on-Insulator (SOI) Phase Modulator. In: International Conference on Photonics (ICP 2010), 5-7 Julai 2010, Pulau Langkawi.

Masni-Azian, Akiah and Toibah, Abd Rahim and Mohd Nazrin, Muhammad and Zuraida, Abdul Majid (2012) Preliminary Development of Abrader Tool for Paper De-Printing Apparatus using Taguchi Method. In: 2nd International Conference on Design and Concurrent Engineering, 15-16 October 2012, Equatorial Hotel, Melaka..

Md Yusop, Azdiana and Noor Asyikin, Sulaiman (2008) VIBRATION CONTROL OF A GANTRY CRANE SYSTEM USING DYNAMIC FEEDBACK SWING CONTROLLER. In: National Conference on Design & Concurrent Engineering, 28-29th October 2008, Melaka.

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani (2013) A simulation-based approach to decision support for lean practitioners. In: 20th ISPE International Conference on Concurrent Engineering, 2-6 September 2013, Melbourne , Australia.

Mohamad Sapiee, Mohd Razali and Noordin, Aminurrashid and Basar, Mohd Farriz and Rasin, Zulhani and Talib, Md Hairul Nizam (2010) Road vehicle following system with adaptive controller gain using model reference adaptive control method lyapunov approaches. In: The 2nd International Conference on Engineering and ICT (iCEi2010), 18 -20th February 2010,, Melaka.

Mohd Abid, Mohd Asyadi Azam (2012) Thermoelectric and Electrochemical Properties of Highly Ordered Conducting Polymer/Carbon Nanotube Structures. In: 12th International Workshop on the Electrochemistry of Electroactive Materials (WEEM), 3-6 June 2012, Szeged, Hungary.

Mohd Abid, Mohd Asyadi Azam (2013) Towards realization of high performance energy storage device: Nanostructuring CNT electrode. In: Workshop on Advanced Energy Storage Materials & Devices (WAESD), 4-5 July 2013, UPNM, Kuala Lumpur.

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and raja seman, raja noor amalina (2014) Designing Supercapacitor from Nanocarbon Materials. In: Design and System Division Conference, 17-19 September 2014, Tokushima University, Japan.

Mohd Abid, Mohd Asyadi Azam and Abd Rashid , Mohd Warikh and Isomura , Kazuki and Fujiwara, Akihiko and Shimoda, Tatsuya (2012) Surface Properties Of Aluminium Oxide Support Layer Used For Vertically Aligned Single-Walled Carbon Nanotube Growth. In: International Conference on X-Rays & Related Techniques in Research & Industry 2012 (ICXRI 2012) , 3-5 Julai 2012, Vistana Hotel, Pulau Pinang. (Submitted)

Mohd Annuar, Khalil Azha and Ismail, Fatimah Sham (2014) Optimal Pin Fin Arrangement of Heat Sink Design and Thermal Analysis for Central Processing Unit. In: Intelligent and Advanced Systems (ICIAS), 2014 5th International Conference, 3-5 June 2014 , KLCC Kuala Lumpur.

Mohd Aras, Mohd Shahrieel and Abd Aziz, Mohamad Zoinol Abidin (2008) Dielectric Resonator Antenna (DRA) for Wireless Application. In: INTERNATIONAL RF AND MICROWAVE CONFERENCE PROCEEDINGS, 2- 4 December 2008, Kuala Lumpur, MALAYSIA.

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Fara Ashikin , Ali and Syed Mohamad Shazali, Syed Abdul Hamid and Mohd Farriz , Md Basar (2011) Performances Evaluation and Comparison of Two Algorithms for Fuzzy Logic Rice Cooking System (MATLAB Fuzzy Logic Toolbox and FuzzyTECH). In: 2011 IEEE Conference on Open Systems, 25-28 Sept 2011, Langkawi, Malaysia.

Mohd Aras, Mohd Shahrieel and Hairi, Mohd Hendra and Syed Salim , Syed Najib and Wan Abdul razak, Intan Azmira (2009) Comparison of Fuzzy Control Rules using MATLAB Toolbox and Simulink for DC Induction Motor-Speed Control. In: International Conference of Soft Computing and Pattern Recognition, December 04-December 07, Malacca, Malaysia.

Mohd Aras, Mohd Shahrieel and Mohamad Zoinol Abidin, Abd Aziz and Rasin, Zulhani (2008) An Array of Dielectric Resonator Antenna for wireless application. In: 2008 IEEE INTERNATIONAL RF AND MICROWAVE CONFERENCE PROCEEDINGS, 2-4 december 2008, Kuala Lumpur, Malaysia.

Mohd Aris, Nor Azlan and Din, Jafri and Lam, Hong Yin (2011) Rain height information from TRMM precipitation radar for satellite communication in Malaysia. In: 2011 IEEE International Conference on Space Science and Communication (IconSpace), 12-13 July 2011, Penang, Malaysia.

Mohd Daud, Mohd Ahadlin and Din, Abdul Talib and Selamat, Mohd Zulkefli (2012) Effect Of Heat Treatment On Microstructure And Mechanical Properties Of Az61 Magnesium Alloys. In: 3rd International Conference on Engineering & ICT (ICEI 2012) , 4-6 April 2012, Mahkota Hotel, Melaka.

Mohd Hatta, Maziati Akmal and Al-Amani, Umar and Abdul Rashid, Mohd Warkih and Azmi, Nurul Azuwa (2015) Preliminary study of KNN thin films doped by rare-earths for sensor applications. In: Mechanical Engineering Research Day 2015, 31 March 2015, Technology Campus, UTeM.

Mohd Ibrahim, Imran (2007) Microwave Absorbers Development For Anechoic. In: International Conference on Engineering and ICT (ICEI 2007) Engineering & ICT, Meeting the Challenges of Advanced Manufacturing Proceedings, 27-28 November 2007, Hotel Equatorial, Melaka.

Mohd Razali, Mohamad (2005) A comparative study of continuous wave and pulsed wave Coz lazer cutting of a polymer matrix composite material. In: Conference On Advanced Materials, (ATCi2005), 6 - 8 December, 2005, Putrajaya, Malaysia. (Submitted)

Mohd Razali, Muhamad and Norizah , Mohamad and H., Hussain and A.R., Songi and S.N., Othman (2004) Collaborative product development implementation between Malaysian auto suppliers and their customer. In: Proceedings of the 2'' llEC- 2004, 19-20 December, 2004, Riyadh, Kingdom of Saudi Arabia. (Submitted)

Mohd Rusdy , Yaacob (2014) Study of the performance of XBee modules’ communication in clear line of sight with different mounting elevations in viral advertisement system. In: International Conference on “Multidisciplinary Trends In Academic Research” 2014, 29-30 September 2014, Holiday Inn Silom, Bangkok.

Mohd Rusdy , Yaacob and Lim , Wee Teck and Nik Anwar, Nik Syahrim (2013) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Rusdy , Yaacob and Nik Anwar, Nik Syahrim (2011) Effect of Reflective Objects of Different Colors to the Output Voltage-Distance Characteristics of Sharp GP2D120 IR Sensor. In: MUiCET 2011, 2011, Batu Pahat, Johor.

Mohd Rusdy , Yaacob and Yusuf Lada, Musa (2012) STUDY ON THE LOAD DISTRIBUTION BY A CHARGE CONTROLLER OF A PASSIVE SOLAR GREENHOUSE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia .

Mohd Rusdy , Yaacob and Anuar , Mohamed Kassim and Lim , Wee Teck (2013) Effect of Obstacle Angles on Signal Strength for Different Mounting Elevations of XBee Pro Module in Viral Advertisement System. In: International Manufacturing Engineering Conference (iMEC 2013), 1-3 July 2013, Gambang, Kuantan, Pahang, Malaysia.

Mohd Saat, Fatimah Al Zahrah and Zhibin, Yu and Jaworski, Artur (2011) CFD-assisted regenerator analysis: application to thermoacoustic system. In: The 23rd IIR International Congress of Refrigeration, 21-26 August 2011, Prague, Czech Republic.

Mohd Tahir, Musthafah and Abdul Kudus, Syahibudil Ikhwan and Mansor, Muhd Ridzuan and Hassan, Muhammad Zahir and Shaharuzaman, Mohd Adrinata (2011) Implementation Of Cooperative Learning In Engineering Education : A Case Study On The Utem Perodua Eco - Challenge Project. In: the 1st National Conference on Active Learning (NCAL 2011) , 10-11 December 2011, Kampus Bandar UTeM. (Submitted)

Muda, A. K. (2009) Mining Generalized Features for Writer Identification. In: International Conference on Data Mining and Optimization, 27-28 October, 2009, Selangor.

Muda, A. K. and Shamsuddin, S. M. and Abraham, A. (2009) Authorship Invarianceness for Writer Identification. In: International Conference on Biometrics and Kansei Engineering ICBAKE2009, 25 - 28, June 2009, Cieszyn, Czech Republic.

Muda, A. K. and Pratama, S. F. and Yun-Huoy, C. and Muda, N. A. (2011) Selecting Significant Features for Authorship Invarianceness in Writer Identification. In: Springer - Software Engineering and Computer Systems ICSECS 2011, 27 - 29 June, 2011, Pahang, Malaysia.

Muda, A. K. and Shamsuddin, S. M. (2005) A Framework of Artificial Immune System in Writer Identification. In: International Symposium of Bio-inspired Computing, 5 - 7 Sept, 2005, Johor Bahru, Malaysia.

Muda, A. K. and Shamsuddin, S. M. and Darus, M. (2006) Bio-Inspired Generalized Global Shape Approach for Writer Identification. In: INTERNATIONAL ENFORMATIKA CONFERENCE, 24 - 26 Nov, 2006, Venice, Italy.

Muda, N. A. and Ahmad, S. and Muda, A. K. (2011) Recognizing Patterns of Music Signals to Songs Classification Using Modified AIS-Based Classifier. In: Springer - Software Engineering and Computer Systems ICSECS 2011, 27 - 29 June, 2011, Pahang, Malaysia.

Mun, Wai C. and Putra, Azma and Rivai, Ahmad (2012) Analysis Of Vibration Level Of A Perforated Panel Using Finite Element Method. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Mun Wai, Chee and Putra, Azma and Rivai, Ahmad (2012) Analysis Of Vibration Level Of A Perforated Panel Using Finite Element Method. In: 3rd International Conference on Engineering & ICT (ICEI2012) , 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Mustaffa, Izadora (2013) The effect of sound levels on attention deficit. In: 2013 International Conference on Instrumentation, Communication, Information Technology and Biomedical Engineering, 7-8 November 2013, Bandung Indonesia.

N V Visvanathan, P. Susthitha Menon and Haroon, Hazura and Majlis, Burhanuddin Yeop and Abdul Razak, Hanim and Bidin, Mardiana and Lilik Hasanah and Budi Mulyanti and Dadin Mahmudin and Goib Wiranto (2010) Modeling of SOI-based MRR by coupled mode theory using lateral coupling configuration. In: IEEE International Conference on Semiconductor Electronics, 2012, 19-21 September, 2012, Kuala Lumpur.

Ngadiman, M. Y. and Hussin, B. and Abdul Majid, I. (2011) A STUDY OF HUMAN SKILL ACHIEVEMENT IN MALAYSIAN PUBLIC UNIVERSITIES: KNOWLEDGE, SKILL AND ATTITUDE. In: INTERNATIONAL CONFERENCE ON MANAGEMENT (ICM 2011) , 13-14 June 2011, Hydro Hotel, Penang, Malaysia.

Ngasmin, Agus Setyo Budi and Ahmad, Asmala and Ayof, Mohamad Nizam and Lau, Kok Tee (2006) The Ac Conductivity Of Samarium Phosphate Glasses. In: Seminar on Science & Its Application in Industry (SSASI 2006), vol.1 , 14-15 Februari 2006, Century Mahkota Hotel, Melaka. (Submitted)

Noor Azwan, Shairi (2012) Adjacent channel rejection analysis due to channel select filter in RF superheterodyne receiver of WLAN IEEE 802.11a. In: Research and Development (SCOReD), 2012 IEEE Student Conference on , 5-6 Dec 2012, Pulau Pinang .

Noordin, A. and Salim, M.A. and M. R., Sapiee and Sabikanee, S. and Hasan, M.H.C. and Md. Sani, Z. and Othman, M.H. (2012) Development of a Quadruped Crawling Robot Prototype. In: THE 3RD INTERNATIONAL CONFERENCE ON ENGINEERING & ICT (ICEI2012), 4-5 April 2012, Melaka.

Omar, M.Khaled and Abdullah, Rohana and Abd. Rahman, Md. Nizam (2012) Process and Labour Utilization in The Electronic Industry: A Simulation Approach. In: 6th IEEE International Conference on Management of Innovation and Technology, 10-14 Jun 2012, Sanur, Bali, Indonesia.

Pratama, S. F. and Muda, A. K. and Yun-Huoy, C. (2010) Feature Selection Methods for Writer Identification: A Comparative Study. In: IEEE International Conference on Computer and Computational Intelligence (ICCCI 2010), 25 - 26 December, 2010, Nanning, China.

SAID, MD RADZAI and Zakaria, Mohd Firdaus and Ismail, Mohd Khairi (2012) The Specific Energy Absorption Of Local Wood Subjected To Quasi-Static Loading. In: International Conference on Application and Design in Mechanical Engineering (ICADME 2012) , 27-28 Februari 2012, Bayview Beach Resort, Penang. (Submitted)

Saari, Noor Fariza and Putra, Azma and Bakri, Hairul and Ramlan, Roszaidi (2012) Characterization of a structure-borne source using the reception plate method. In: International Conference on Engineering and ICT 2012, 4-6 April 2012, Mahkota Hotel, Melaka. (Submitted)

Sahbudin, Saari and Hanim, Abdul Razak and Mardiana, Bidin and Haroon, Hazura and Menon, P.S (2010) Modeling And Analysis Of Lateral Doping Region Translation Variation On Optical Modulator Performance. In: THE 4TH ASIAN PHYSICS SYMPOSIUM—AN INTERNATIONAL SYMPOSIUM, 12-13 Oktober, Bandung, Indonesia.

Sahul Hameed, Sahara and Salam, S. and Bakar, Norasiken (2011) Bringing Mobile Pedagogical Agent To Support Virtual Cooperative Learning. In: the Conference on Academic Development in Higher Education (ADHE2011) , 2-4 November 2011, MAEPS, Serdang, Selangor. (Submitted)

Saipullah, Khairul Muzzammil (2012) Real-Time Video Processing Using Native Programming on Android Platform. In: 2012 IEEE 8th International Colloquium on Signal Processing and its Applications, 23-25 March 2012, Melaka.

Saipullah, Khairul Muzzammil (2012) ANALYSIS OF REAL-TIME OBJECT DETECTION METHODS FOR ANDROID SMARTPHONE. In: 3rd International Conference on Engineering and ICT (ICEI2012) , 4 – 5 April 2012, Melaka, Malaysia . (In Press)

Saipullah, Khairul Muzzammil (2011) Continuous Local Histogram Descriptor For Diagnosis of Bronchiolitis Obliterans. In: IEEE Hybrid Intelligence System 2011 (HIS2011), 5-8 December 2011, Ayer keroh, Melaka.

Saipullah, Khairul Muzzammil (2011) Spectral dimensionality reduction based on intergrated bispectrum phase for hyperspectral image analysis. In: Image and Signal Processing for Remote Sensing XVII, Monday 19 September 2011, Prague, Czech Republic.

Saipullah, Khairul Muzzammil (2012) Enhancing Spectral Classification Using Adaboost. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) 2012, 11 - 13 Dec 2012, Melaka.

Saipullah, Khairul Muzzammil (2012) Feature Extractor for the Classification of Approved Halal Logo in Malaysia. In: IEEE International Conference on Control System, Computing and Engineering, 23-25 November 2012, Penang .

Saipullah, Khairul Muzzammil (2012) JAKIM's Halal Logo Recognition System based on Android Smartphone. In: iDECON 2012 – International Conference on Design and Concurrent Engineering, 15 - 16 October 2012, Melaka.

Salleh, Azahari and Abd Aziz, M. Z. A and Mohamad, Najmiah Radiah and Hashim, Nik Mohd Zarifie and Ja'afar, Abd Shukur (2013) Simulation of Wideband Power Amplifier Design for Software Defined Radio (SDR) Using Feedback and Balanced Topology. In: The 15th International Conference on Advanced Communications Technology-ICACT2013, 27-28 DISEMBER 2013, JEJU ISLAND KOREA.

Shaaban, Azizah (2007) The Production And Characterization Of Near Stoichiometric NdFeB-Type HDDR Powder. In: International Conference on Engineering and ICT (ICEI 2007) Engineering & ICT, Meeting the Challenges of Advanced Manufacturing Proceedings, 27-28 November 2007, Hotel Equatorial, Melaka.

Shairi, Noor Azwan and Ahmad, Badrul Hisham and Peng Wen, Wong (2012) The Potential Application Of Switchable Matched Parallel-Coupled Stub Resonator In SPDT Discrete Switch Design. In: Applied Electromagnetics (APACE), 2012 IEEE Asia-Pacific Conference on , 11-13 Dec 2012, Melaka.

Siti Noormiza , Mat Isa and Zulkifilie, Ibrahim and Jurifa , Mat Lazi (2011) Comparative analysis of simplified and standard fuzzy logic controller in vector controller PMSM. In: IEEE Symposium On Industrial Electronics and Applications, 25-28 September 2011, Langkawi, Kedah. (Submitted)

Sivarao, Subramonian and Taufik, , (2007) Coating characterization of TiN & TiAIN on burr formation in drilling pragmatic investigation. In: International Conference on Engineering and JCT (ICE! 2007),, 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Sivarao, Subramonian and Taufik, . (2007) Comparative quality investigation of rolled and flat carbon steel plates in drilling. In: International Conference on Engineering and ICT (ICEI 2007), 27 -28 Nov 2007, Hotel Equatorial Melaka.. (Submitted)

Tan, CheeFai and Ranjit, S.S.S. and Ong, S.T, and Ngeow, Y.W. (2011) The Sustainable Technological Innovation among SMEs in South East Asia Countries: A Case Study. In: 29th Conference of the ASEAN Federation of Engineering Organization (CAFEO), 27-30 November 2011, Brunei Darussalam.

Thangaraj, Joseph Sahaya Anand and Chua, Kok Yau and Hng, May Ting and Lee, Cher Chia (2012) Xrd Analysis Of Cu-Ai Interconnerct Intermetallic Compound In An Annealed Micro-Chip. In: International Conference on X-Rays & Related Techniques in Research & Industry 2012 (ICXRI 2012) , 3-5 Julai 2012, Vistana Hotel, Pulau Pinang.

Yahaya, M.S and Noordin, A. and Ahmad, S. and Mohamad Sapiee, M.R. (2012) Engineering Technology Program In Malaysia: A Market Survey. In: The International Conference on Teaching & Learning in Higher Education (ICTLHE 2012) in conjunction with the 4th Regional Conference on Engineering Education and Research in Higher Education 2012 (RCEE 2012 & RHEd 2012), 10-12 April 2012, Seremban, Negeri Sembilan.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. and Sim, Edwin Y. S. and Yaw, M. W. (2011) ARTIFICIAL IMMUNE ALGORITHM BASED GRAVIMETRIC FLUID DISPENSING MACHINE. In: Eleventh International Conference on Hybrid Intelligent Systems (HIS 2011), 5-8 December 2011, Malacca.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Antibody Remainder Method Based Artificial Immune System for Mathematical Function Optimization. In: 3rd International Conference on Machine Learning and Computing (ICMLC 2011) , 26-28 Feb 2011, Singapore.

Yap, David F. W. and Koh, S. P. and Tiong, S. K. (2011) Artificial Immune System based on Hybrid and External Memory for Mathematical Function Optimization. In: 2011 IEEE Symposium on Computers & Informatics, 20-22 March 2011, Kuala Lumpur.

Ya’acob, Norsuzila and Yusop, Norbayah and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Mohd Salleh, Mohd Khairul (2012) Observation of Tweek Characteristics in the Mid- Latitude D-Region Ionosphere. In: 2012 IEEE Symposium on Wireless Technology and Applications (ISWTA), 23-26 September 2012, Bandung, Indonesia.

Yuniawan, Dani and Ito, Teruaki and Mohamad, Effendi (2013) A proposal of total productive maintenance training system. In: JSME No.13-205 The 13th Design Engineering Workshop 2013, 28-30 November 2013, Kitakyushu, Japan.

Yusop, Norbayah and Ya’acob, Norsuzila and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Idris, Azlina and Mohd Ali, Darmawaty (2012) Nighttime D-Region Ionosphere Characteristics from Tweek Atmospherics observed in the North America Region. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE) , 11-13 December 2012, Melaka.

Yusop, Norbayah and Ya’acob, Norsuzila and Mohd Shariff, Khairul Khaizi and Yusof, Azita Laily and Ali, Mohd Tarmizi and Idris, Azlina and Mohd Ali, Darmawaty (2012) Nighttime D-Region Ionosphere Characteristics from Tweek Atmospherics observed in the North America Region. In: 2012 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2012), 11-13 Dec 2012, Melaka.

Zulkafli, Nur Izyan (2012) Optimum Heat Exchanger Network Cleaning Schedules for Crude Distillation Unit. In: 1st international conference of chemical, environment and energy, 21-23 September 2012, Kuala Lumpur, Malaysia. (Unpublished)

Book

Mohd Rosli, Zulkifli and Ismail, Syahriza, eds. (2023) Progress on advanced & smart materials in engineering and mathematics. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9789672792833

Sihombing, Haeryip and Yuhazri, Yaakob and YAHAYA, SAIFUDIN HAFIZ and Sivarao, Subramonian and Hazwan, M.A (2012) An Analysis of Quality Criteria to Determine the Improvement Priority Attributes. Universiti Teknikal Malaysia Melaka, pp. 489-493. ISBN 978-967-0257-16-7

Sivarao, Subramonian and Mohd Shukor, Salleh and T. Joseph, Sahaya Anand and Syamimi , Samsudin and Ian Peter, Hasoloan Haery (2011) A Compilation Of Various Research In Manufacturing Engineering Part 1. Penerbit Universiti Teknikal Malaysia Melaka, pp. 1-178.

ahmad kamely, mohamad and Sachlan, Ermansyah and Sivarao, Subramonian (2011) PREDICTION OF THE BENDING STRENGTH USING RESPONSE SURFACE METHODOLOGY. Curran Associates, Inc, 57 Morehouse Lane ,Red Hook, NY 12571 USA , United State. ISBN 978-1-4577-0005-7

Thesis

Rajes, K.M.Rajan (2014) Synthesis and characterization of electrodeposited nickel chalcogenides for photoelectrochemical/ solar cell application. Masters thesis, Universiti Teknikal Malaysia Melaka.

A. Hassan, Mohsin (2016) Structural analysis of shape-morphing aircraft slat by using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

AL-Dabbagh, Minah Mohammed Fareed Abd-A (2016) Axial crushing of thin-walled tube with hole under quasi-static loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab. Latif, Nurain Shyafina (2016) Sound Radiation From Vibrating Plate With Different Boundary Conditions Using Discrete Source Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Aziz, Norfarhana (2018) Electrical And Thermomechanical Properties Of Epoxy Filled Hybrid Covalent Treated MWCNTs/GNPs Nanocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Ghani, Mohamad Hanifah (2019) Investigation Of Cellulose Fiber From Banana Waste By Chemical Treatment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Latif, Mohd Abrar (2017) Mechanical, physical and morphological properties of Kenaf fiber and natural filler reinforced polypropylene hybrid composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rahim, Ahmad Shahizam (2016) Development Of Nanofiber-Coated Cabin Air Filter For Enhancing Filtration Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Rashid, Shafiyah (2018) Development Of Finger Type Tactile Sensor With Surface Roughness Analysis. Masters thesis, UTeM.

Abd Razak, Siti Safwana (2019) Development Of Stereo-Matching Algorithm Based On Adaptive Weighted Prediction. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Samad, Sofian (2018) An Effect Of Surface Roughness To Colour Sensor Detection Range In Ambient Temperature. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Hamid, Abdul Hakim (2019) Experimental Investigation On The Influence Of DLC Coating On The Wear Behaviour Of Helical Gear. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Latiff, Anisah (2017) Mechanical and tribological properties of recycled carbon fiber reinforced polypropylene composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Manaf, Nor Syafira (2015) Fabrication and characterization of high performance electrochemical capacitor using vertically aligned carbon nanotube direct growth technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahman, Nor Nabilah Syazana (2018) Automated Vision-Based Beverage Bottle Quality And Level Inspection System. Masters thesis, UTeM.

Abdullah, Adli Zil Ikram (2017) Optimization of MWCNT mixture in MicroPCM composite for thermal performance testing at different ambient temperature. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Amirah (2019) Stability And Thermal Properties Of Hydroxyl Multiwalled Carbon Nanotubes In Different Medium. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Aznizam (2014) Design and finite element analysis of interference press-fit aluminium nut. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Zailinda (2019) Mechanical Behaviour Of Carbon Reinforced Polymer Using RTM And VIP Techniques For Aircraft Spoiler Hinge. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abidullah, Noor Athira (2015) Real-time power quality detection and classification system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Noor Farah Iddayu (2019) Synthesis Of Hematite/Mwcnts Nanocomposite Through Thermal Oxidation And Spin Coating. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Shah, Ismail (2017) Damage Mechanics Based Approach In Failure Prediction Of Draw Forming Processes. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ademola, Adebayo Babatope (2019) Accelerated Weathering Of Rubberwood Reinforced Recycled Polypropylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Adnan, Nor Hafizah (2018) Effect Of Fiber Orientation And Composition Percentage To The Properties Of Particle Board From Banana Fiber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Aina Syuhada (2020) Microstructural Characterization And Fracture Observation Of Green Innovative Glass (GIG) Ceramic Tiles Produced By Sinter Crystallization Of Waste Glass. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Muhammad Taufiq (2015) Thulium-doped fiber as gain medium and saturable absorber for pulsed fiber laser. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad, Suraya (2018) A Framework For Sustaining Lean Thinking With Systems Thinking In Malaysian Aerospace Companies. Doctoral thesis, UTeM.

Ahmad Adli, Muhammad Akmal (2020) Finite Element Simulation Of Aluminium Silicon Carbide Metal Matrix Composite Machining. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al, Munawir (2014) A corrected model of statistical energy analysis (SEA) in a non-reverberant acoustic space. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Khafaji, Omar Abdul Hassan Lafta (2016) Lateral Crushing Of Circular Ring Tube Under Quasi-Static Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Albawab,, Tarek Mhd Moataz (2019) Automated Postural Angle Classification Using Microsoft Kinect For Ergonomics Assessment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Algaet, Mustafa Almahdi (2018) Enhancement Of Medical Image Compression Algorithm In Noisy WLANS Transmission. Doctoral thesis, UTeM.

Ali, Farith Aqmal (2020) Plasma Generation Atmospheric Pressure By Using Microwave Radiation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali Hussein Aboali, Maged Yahya (2018) Enhanced Image View Synthesis Using Multistage Hybrid Median Filter For Stereo Images. Masters thesis, UTeM.

Allafi, Waleed Almukhtar Allafi (2020) Investigation Of Oscillatory Flow Inside Thermoacoustic System With Two Different Flow Frequencies. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aminuddin, Nur Shazwani (2018) Development Of Algorithms For Vehicle Classification And Speed Estimation From Dynamic Scenes By On-Board Camera Using Image Processing Techniques. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aramjat, Abu Bakar (2014) The effects of glass waste and grog on physical and mechanical properties in porcelain by powder pressing method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arbain, Nur Atikah (2016) Improving Triangle Geometry Shape Features Through Triangle Points Selection In Digit Recognition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arif, Afraha Baiti (2019) Electromagnetic Wave Absorption Efficiency Of Green Superhydrophobic Magnetic Nanocomposite Sheet From Durian Shell. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Asih, Hayati Mukti (2014) Mixed-load machine utilization improvement and transfer batch size optimization using hybrid simulation approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Asih, Hayati Mukti (2018) Capacity Planning For Mixed-Load Tester Under Demand And Testing Time Uncertainty. Doctoral thesis, UTeM.

Azhar, Emmy Nurulazwana (2018) Effect of quarry dust composition on the properties of nickel-quarry dust composite coatings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aziz, Azim (2013) The effect of cooling rate on mechanical and morphological properties of heat treated recycled aluminum alloy from scrap. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aziz, Nur Arba'ayah (2016) Study and change of material on autovision machine unit stopper. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azizan, Noor'ain (2020) Development Of Lumbar Support Device Using Malaysian Anthropometry Database And Its Physical And Physiological Effects. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Muhamad Syafwan (2019) Vibration Analysis Of Fused Deposition Modeling Printed Lattice Structures Cellular Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Badaruddin, Nur Izayu (2018) Optimization of secondary bonding in layup process based on six sigma method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bairan, Aninorbaniyah (2018) Effect of multiwall carbon nanotube loading on multi filler polymer composite as bipolar plate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Balai, Lorita Lawi (2018) Comparison of properties of polypropylene fiber glass in injection moulding process using different gate locations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Balakrishnan, Paramananthan (2019) Investigation of natural hybrid sandwich panel and thin skin cover towards acoustical performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Bistamam, Mohd Shahril Amin (2015) Parameteric study of aligned carbon nanotube growth using alcohol catalytic chemical vapor deposition technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Budi, Esmar (2010) Modeling of reactively sputtered TiAIN coating on tungsten carbide insert tool its properties and cutting performance in dry turning of AISI D2 steel. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Che Othaman, Siti Syahirah (2021) Mechanical characterisation of hybrid GNPS and functionalised BN as a thermal interface material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chong, Meng Mun (2015) Development of CNT/SiO2 fillers reinforced polyester hybrid composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chong, See Ying (2018) Stab resistant analysis for body armour design features manufactured via fused deposition modeling process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chuli, Abd Jumaidi (2019) An Investigation Of Energy Absorption Characteristics Of Honeycomb Structure Under Lateral Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dabis, Badr Kamoon (2013) Laser processing of linear bevel cutting. Masters thesis, Universiti Teknikal Malaysia Melaka.

Daud, Nadiah (2017) A Clinical Functional Requirements (CFR) domain library for elicit correct clinical requirements. Masters thesis, Universiti Teknikal Malaysia Melaka.

Eng, Poh Hwa (2011) The impact of facebook design features on popularity of the photography facebook pages. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ferda, Ernawan (2014) An efficient psychovisual threshold technique in image compression. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Gan, Melvin Yeou Wei (2022) Disparity map algorithm for stereo matching process using local based method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gwee, Chiou Chin (2013) The performance of tool holder clamping technique in conventional lathe with passive damping system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Harhara, Sohaib Mohammed Nasser (2021) The Implementation of Analytic Hierarchy Process To Determine the Optimal FDM Process Parameters. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hazlinda, Kamarudin (2014) Effect of grog addition on local clay ceramic properties using extrusion method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hermanto, Tino (2021) Effect Of Low Frequency Excitation Location For Crack Detection In Aluminium Plate Using Nonlinear Vibro-Acoustic Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hong, Mun Hoh (2020) CFD Simulations Of Enhancement Of Jet Mixing By Lateral Synthetic Jet Pair. Masters thesis, Universiti Teknikal Malaysia Melaka.

Husin, Mohd Amirhafizan (2021) Development Of Kenaf Woven Fabric Reinforced Epoxy And Polypropylene Composite With Different Stitching Pattern. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Husin, Mohd Amirhafizan (2016) Effects of fiber reinforcements weave patterns on the mechanical properties of hybrid intraply lamina. Masters thesis, Universiti Teknikal Malaysia Melaka.

Husin, Mohd Amirhafizan (2021) Optimization Of Ammonia Release Model In A Fluidized Bed Granulation System Using RSM And PSO. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Hussain, Nur Fadzila (2019) Low Velocity Impact Response Of Oil Palm Empty Fruit Bunch Fibre Metal Laminates. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hussein, Turki Diwan (2013) Laser processing of non-linear incline cutting. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Asriana (2017) Modeling Of Dynamic Behavior In Closed Crack And Nonlinear Ultrasonic Array Imaging. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Muhammad Najib (2019) The Effect Of Surface Roughness On Tensile Strength Of Fiberglass Reinforced Polymer Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Idris, Syahril Anuar (2016) Development Of Pipeline Corrosion Inspection System Using Machine Vision. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ilias, Mohammad Nazriq (2019) Study On Ergonomic Of Working Posture And Workstation Design In Meyer Burger Factory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ishak, Mazlan (2018) Investigation of the Compression Failure in Woven Carbon Laminate Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ismail, Mohd Shahrom (2021) Stability analysis of cone-cylinder shell structures. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Jalaluddin, Mohamed Lokman (2022) Maternally derived immunity, susceptible, infected and recovered (msir) model for pandemic covid-19 forecasting in Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamadi, Aida Haryati (2023) Characterization of fused deposition modelling printed kenaf fibre reinforced poly-lactic acid composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jansar, Muhammad Faiz (2019) Utilization Of Industrial Waste Derived Ashes As Filler In Acrylonitrile-Butadiene-Styrene Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jasmee, Solehah (2019) Hydrophobicity Performance Of Polyethylene Terephthalate, Thermoplastic Polyurethane And Aluminium Substrates Using Self-Fabricated Contact Angle Tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jimit, Roy Hanson (2019) Fatigue Life Behaviour Of Fiberglass Reinforced Composites Subjected To Constant And Variable Amplitude Loadings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Johari, Dahlia (2020) Investigation of oscillatory-flow behaviour across internal structure in thermoacoustic refrigeration system. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jumaat, Faizal Azli (2016) Investigation On The Mechanical Properties Of Hybrid Fibre Metal Laminate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jumadi, Muhammad Taufiq (2019) Investigation On Physical, Thermal, Mechanical And Morphological Properties Of Kenaf Reinforced Recycled Polypropylene/Polyethylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kadhim, Kamil Jawad (2016) Effect Of Coating Thickness On The Microstructure, Mechanical And Wear Properties Of A1TiN Coatings Deposited Using Arc Ion Plating Technique. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Kanzal, Sameh Mohsen Omer (2020) Effect of changing initial joints position on joint torque required for sit-to-stand motion. Masters thesis, Universiti Teknikal Malaysia Melaka.

Karim, Khairu Ilwani (2021) Swelling and thermal effects on mechanical properties of NR/EPDM filled graphene nanoplatelets for engine mounting. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khairul, Khairil Azwa (2022) Formation of Co304-Ti02 bi-component nanotubes via robust anodization and wet impregnation method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khalaf, Mohammed Oudah (2018) A Computational Fluid Dynamics (CFD) study of an airflow in a single storey building integrated with a combined system of wind catcher and solar chimney. Masters thesis, Universiti Teknikal Malaysia Melaka.

Khudhair, Ahmed Qays (2016) Physical-mechanical properties of palm kernel activated carbon-epoxy (PKAC-E) composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kolandaisamy, Robert Milkey (2014) Laser machining of glass fibre reinforced plastics (GFRP). Masters thesis, Universiti Teknikal Malaysia Melaka.

Laila, Ahmad (2014) Analysis working posture and psychophysical factor in stamping industry using rula method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lau, Saijod Tse Way (2021) Energy Absorption Performance Of Natural Fibres Reinforced Epoxy Composite Tubes Under Axial And Oblique Loading. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Law, Mei Lin (2016) Preparation And Characterization Of Recycled Carbon/Fibercarbon Nanotube Reinforced Epoxy Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Leong, Shu Teng (2016) Modelling And Characterization Of Stone Wool Fibre Reinforced High Density Polyethylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Sin Ting (2022) A region-based Principal Component Analysis (PCA) technique for medical image compression. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Luei, Hong Keat (2010) Measurement Of Surface Roughness Using Image Processing Technique. Masters thesis, UTeM.

Lum, Chee Choong (2021) Failure Mode and Effects Analysis With Analytical Hierarchy Process For Selecting The Best Design of VLM (Vertical Lift Module) Strategy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lum, Yip Hing (2018) Slow Release Behavior Of Biodegradable Starch Polyvinyl Alcohol Urea Fertilizer. Doctoral thesis, UTeM.

Mahamood, Mazlin Aida (2016) Optimisation And Characterisation Of Functionalised Graphene Nanoplatelets Filled NR/EPDM Nanocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahdzir, Mira Mazlina (2022) Effect of heat treatment on compressive fracture strength and microstructure of CNC milled zirconia dental restoration. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahidan, Fairuz Mardhiah (2021) Instability and sensitivity to imperfection of conical shell subjected to axial compression. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahmood, Raed Abdulameer (2013) Effect of heat treatment on low carbon steel. Masters thesis, UTeM.

Mahmood, Raed Abdulameer (2013) Effect of heat treatment on low carbon steel corrosion behavior. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mahmud, Dayang Nor Fatin (2020) Dry Sliding Investigation Of An Activated Carbon-Epoxy Composite Extracted From Palm Kernel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Majid, Rosmiza (2013) Ergonomic risk factors in material handling for warehouse operations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Maslan, Mohammad Haidir (2016) Development Of Predictive Finite Element Models For Complete Contact Fretting Fatigue. PhD thesis, Universiti Teknikal Malaysia Melaka.

Masron, Farhana (2018) High electrical conductivity bipolar plate using stannum/graphite polymer composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat, Irwan (2017) Effect Of Microwave Curing On Laminate Composites Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat, Zamzury (2013) Development of sustainable material selection for automotive bumper fascia using analytical hierarchy proses (AHP). Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Noor, Noraina Alia (2019) Preparation And Characterisation Of Epoxy/Kenaf/Mwcnts Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Tahir, Noor Ayuma (2016) Tribological Performances For Palm Kernel Activated Carbon Epoxy Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Yaacob, Mohd Noor Alhadi (2018) Electroless Nickel Deposition On Surface Activated Kenaf Fiber. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Zin, Nurul Halwanie (2016) Design a manual calf massager for prolonged standing worker by using ergonomic approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Nor Hayati, Norilani (2020) Shape Preserving In Aerodynamic Product Profiles Using Geometric Design Modelling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Yusuf, Muhammad Yusri (2018) Investigation on the effect of multi filler loading in graphite-polypropylene composite as bipolar plate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Zahir, Nur Aizatul 'Ain (2019) Optimization Of Hybrid Carbon And Glass Fiber Reinforced Polymer Using Analytical Hierarchy Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mesri, Masturah (2022) Influence of eggshell loading on sintering mechanism of green glass ceramic composite for physico-mechanical performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Ishak, Nurul Naili (2019) Microstructural Characterization And Mechanical Properties Of Al-Si-Cu Alloys Processed By Equal Channel Angular Pressing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Noor, Mohamad Noor Azran (2019) Tribology And Electrochemical Behavior Of Electroless Quaternary Nickel Alloy Deposition For Cutting Tools. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Salleh, Mohamad Fazli (2016) Study And Analysis Of Power Attenuation Due To Optical Bend Loss In OPGW Overhead Transmission In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Tar, Amira Farhana (2019) Integration Of Analytical Network Process And Theory Of Inventive Problem Solving For Wheelchair Conceptual Design Selection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Yatim, Norazlina (2016) Functionalized Multiwall Carbon Nanotubes For Efficiency Enhancement Used Of Nitrogenous Fertilizer In Paddy. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohammad Jarrah, Mu'ath Ibrahim (2018) Hybrid Artificial Bees Colony Algorithms For Optimizing Carbon Nanotubes Characteristics. Doctoral thesis, UTeM.

Mohammad Jarrah, Mu'ath Ibrahim (2014) Optimization of physical vapour deposition coating process parameters using genetic algorithm. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad Noor, Norida (2023) Correlation study on different temperature-humidity of highly thermal graphene hybridzation conductive ink. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd, Nurul Farah Adibah (2015) Development of kenaf polymer composite sandwich structure. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd, Othman (2015) Hierarchical image classification threshold on mangrove. Doctoral thesis, Universiti Teknikal Malaysia Melaka..

Mohd Amman, Rosmia (2018) Preceding deformation effects on the crush response of the circular cup. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Asri , Yusuff (2014) Penilaian taburan hayat lesu komponen automotif dengan bebanan ekstrem melalui pendekatan ciri hayat taburan dan fungsi keboleharapan. PhD thesis, UTeM.

Mohd Azli Lee, Fatin Ayuni (2022) Development of an integrated ergonomics principles framework with manufacturing process flow in Malaysian industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Farhan Han, Syaza Najwa (2021) Characterisation Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fauzi, Nurul Qistina (2022) Topology and lattice optimization of 15-5PH stainless steel bracket. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fuad, Mohamad Aqil (2019) Aedes Aegypti Larvae Detection System Based On Convolution Neural Network Via Transfer Learning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fuad , Ibrahim (2013) Corrosion analysis of internal surface of carbon steel natural gas piping. Masters thesis, UTeM.

Mohd Ghazali, Athirah (2016) Develop a regression model for relationship between psychophysical and biomechanics factors of push activities. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ghazali, Sarah Nadiah (2017) Study on impact strength of composite between cement paste and corn husk ash. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Hassan, Nur Alya Syaherah (2020) Biomechanical Comparison Considering Risk Of Backpack On Lumbosacral Joint Among Primary Student : During Standing And Climbing Stairs. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Idris, Siti Naimah Solehah (2021) Design optimization of spring loaded knee brace for knee arthritis using finite element analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ishak, Noordiana (2019) Concurrent Engineering Approach In The Development Of Natural Fibre Metal Laminate Product : Case Study On Car Front Hood. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nor, Nurul Aini Nadirah (2020) Effect Of Fiber Laser Modification On Surface Marking Of 22mnbr5 Boron Steel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rosli, Mohd Afzanizam (2016) Pembangunan Dan Kajian Prestasi Lapangan Pengumpul Polimer Dan Fotovoltan Terma (PVT) Polimer Di Malaysia. PhD thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sanusi, Mohammad Hamdan (2017) Deformation Of L-Shaped Aerospace Composite Components. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zafri, Mazatul Nadia (2019) Chemically Modified Graphene Nanoplatelets-Thermoset Adhesive Through Ultrasonication Assisted Mixing For Natural Rubber Aluminium Bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zalani, Naziatul Fazilah (2019) Investigation On Mechanical Behaviour Of Light Weight Woven Kenaf Fibre Reinforced Polypropylene-Aluminium Fibre Metal Laminate. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohmad, Martini (2019) Frictional Characteristics Of Surface Textured Activated Carbon Composite Derived From Palm Kernel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mokhlis, Maizura (2020) A Study On Mechanical And Electrical Properties Of Hybridized Graphene-Carbon Nanotube Filled Conductive Ink. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Said, Nurlaela (2019) Investigation Of Impact Strain Signal Characteristics For Material Behaviour Prediction From Charpy Test. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustaffa., Siti Hajar Adni (2019) Numerical Investigation Of Flow Characteristics Of An Oscillatory Flow Across A Thermoacoustic Stack. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustaffer, Muhammad Harith (2020) Wideband nonlinear dynamic vibration absorber using piecewise linear stiffness for effective structural vibration suppression. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustaq Ahmad, Mohd Khairul Sharil (2014) Green magnetite nanocomposite sheet using coprecipitation loading method as a wave absorber in RFID applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naji, Ihab Munther (2017) Investigation on waste materials as thermal insulation for building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nandagopal, Vanisha Ashweeni (2021) Fluid dynamic simulation for diffusion solder die bond. Masters thesis, Universiti Teknikal Malaysia Melaka.

Narayanasami, Jayaganasan (2017) Preparation & characterization of electrophoretically deposited BN film for semiconductor package. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nasir, Nurulfazielah (2018) Effect of pore-forming agents in macroporous ceramic fabrication as carbon dioxide adsorption. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nazeeh Jamil Bany Melhem (2015) Illumination removal and text segmnetation for Al-Quran using binary representation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Guan Yao (2014) Characterization Of Oil Retrogression Of Aluminum Alloy 7075. Masters thesis, Universiti Teknikal Malaysia Melaka..

Ng, Guat Peng (2014) Creep assessment of overheated grade 9Cr steels for decision making on plant integrity. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ng, Lin Feng (2021) Characterisation of kenaf/pineapple leaf fibre reinforced composite-metal laminates with enhanced mechanical properties. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ng, Lin Feng (2017) Fatigue Life Characteristic Of Hybrid Kenaf/Glass Fibre Reinforced Metal Laminates. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ng, Poh Kiat (2015) Effects of torque direction, shape, size, sensation and technique on pinch force. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Norakmar, Jamal (2013) The Effect of tempering temperatures on a fatigue of AISI 4130. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norizan, Mohammad Zarref Afiq (2020) Analysis Of Different Coating Method For Burn Mark Accuracy In Laser Engraving Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Edynoor (2014) Hygrothermal effect on hybrid composite by using filement winding process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Edynoor (2019) New Hybrid Kenaf Fibre/Epoxy Reinforced Aluminium Laminate Composite For Structural Application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Othman, Intan Sharhida (2016) Electrodeposition Of Nickel Coatings On Aluminium Alloy 7075 Through A Modified Single Zincating Process. PhD thesis, Universiti Teknikal Malaysia Melaka.

Pakiam, Dominic Ajay (2020) Investigation On The Filtration Efficiency Of Nanofiber-Coated Vehicle Cabin Filter. Masters thesis, Universiti Teknikal Malaysia Melaka.

Phongsakorn, Prak Tom (2010) The Effect Of Alkalization Treatment On The Mechanical Properties And Water Absorption Of Kenaf/Polyester Biocomposites. Masters thesis, UTeM.

Pratama, Satrya Fajri (2018) Three-Dimensional Exact Legendre Moment Invariants For Amphetamine-Type Stimulants Molecular Structure Representation. Doctoral thesis, UTeM.

Quah, Jit Shen (2019) Object Isolation In A Random Environment Using Manipulation Primitives Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Radin Monawir, Radin Puteri Hazimah (2018) Human Spontaneous Emotion Detection System. Masters thesis, UTeM.

Raja Seman, Raja Noor Amalina (2016) Direct Growth Of Vertically Aligned Carbon Nanotube (VACNT) On Different Conducting Substrates For Electrochemical Capacitor (EC). Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramdan, Nur Sufiah Akmala (2016) Computer Vision System For Monitoring Body Discomfort In Manufacturing Environment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramily, Nurlina Aimi (2018) Fabrication of floor tiles from recycled HDPE bottle filled recycled glass composite using hot press method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ramli, Siti Nur Rabiatutadawiah (2018) Mechanical performance of pineapple leaf fibre reinforced polylactic acid biocomposites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rayme, Nur Syafiqah (2022) Analysis of musculoskeletal disorder risks at layup process in aviation industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razali, Amirul Herman (2019) Optimization Of Composite Hinges For Aircraft Spoiler Using Finite Element Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rokhim, Mochamad Iqbal (2021) Development of validated finite element model for reinforced thin-walled I-beam using steel patch method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosli, Nur Ameelia (2019) Effect Of Post Processing Parameters Andcompression Behavior On FDM 3D-Printed ABS Lattice-Structures. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosszainily., Intan Raihan Asni (2019) Effect Of Carbon Black Reinforcement On The Mechanical Properties Malaysia Rubber Compound. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rudzlan Apandi, Noor Shakinah (2019) Vibration Characteristics On Ball Bearing Operated With Hexagonal Boron Nitride Nanoparticles Mixed With Conventional Diesel Engine Oil. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rusli, Nur Syamimi (2019) Study On Processing Parameters For Polypropylene Reinforced With Fiber Glass Composite Prepared Using Injection Molding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saad, Hartini (2021) A study of highly conductive pattern by manual printing of graphene nanoparticles with different width size. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saari, Noor Fariza (2015) Variability in vibration input power from the structure-borne sound sorce on plate and beam structures. Masters thesis, Universiti Teknikal Malaysia Melaka.

Saedin, Mohd Rizal (2017) Green Supplier Model For Composite Manufacturing Industry. Masters thesis, Universiti Teknikal Malaysia Melaka.

Safian, Mohd Azizul Hikmi (2018) The optimization of T6 heat treatment on microstructure and mechanical properties of thixoformed LM4 aluminium alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Said, Zaitul Akma (2018) Improvement of engine bracket design by using topology optimization and additive manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Salim, Mohd Azli (2016) Study Of Transmissibility Of Laminated Rubber-Metal Spring. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Saw, Chia Yee (2023) Neuromorphic learning machine based on stochastic reservoir computing for time series data processing and classification. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sayed Idros, Syed Muhammad Ayyub (2022) Conceptual design of the natural fiber composites of car spoiler using hybrid method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sharif, Mohd Luqman Hakim (2021) Functional electrospun nanofibres for heat dissipation applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shuhimi, Fairuz Fazillah (2017) Wear failure analysis of empty fruit bunch and kenaf fibres composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shukur, Azurin (2022) Integration on ergonomic risk factors to improve worker’s comfort level in composite trimming process. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Soh, Tiak Chuan (2016) Improvement On Tear Resistance Of Rubber Moulded Mat By Varying Filler And Accelerator Contents. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Soong, Meng Keong (2022) Synthesis and characterizations of phosphorene added graphene prepared via solid state reactions. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suarin, Mohd Azizan (2021) Biomechanical study of total disc replacement prosthesis on spinal facet joint using finite element method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Subramaniam, Kathiravan (2021) Investigation of mechanical performance of woven kenaf/glass hybrid composite metal laminate. Masters thesis, Universiti Teknikal Malaysia Melaka.

Subramaniam, Kavitha Pichaiyan (2010) Image clustering comparison of two color segmentation techniques. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suhaimi, Khalis (2015) Nonlinear energy harvesting device for low frequency human motion application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suhaimi, Muhamad Syirazi (2019) Investigation Of Mechanical Properties On Cement Paste Filled With Palm Oil Fuel Ash (POFA). Masters thesis, Universiti Teknikal Malaysia Melaka.

Suhaimin, Mohd Khairul Nizam (2020) The effect of resistance heating to the length expansion of cold bending spring steel bar. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sukor, Nooraziera Akmal (2015) Improved random forest for feature selection in writer identification. Masters thesis, Universiti Teknikal Malaysia Melaka.

Sulaiman, Nur Hidayah (2018) Sensitivity Enhancement Of Optical Fiber Sensor For Liquid Sensing Applications By Using Mach-Zehnder Interferometer. Masters thesis, UTeM.

Tan, Teng Teng (2022) Mechanical effects of cell size and wall thickness on the rubber wood honeycomb sandwich composites. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tarmizi, Aine Ilina (2020) High Accuracy Estimation Of Head Yaw Using Bounding Box Algorithm On A Vision Based System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tee, Zhen Wei (2016) Dry Sliding Wear And Friction Behavior Of Silicon Carbide And Multi Wall Carbon Nanotubes Reinforced Magnesium Matrix Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Teo, Chee Huat (2016) Development Of Double Stage Filter (DSF) On Stereo Matching Algorithm For 3D Computer Vision Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ting, Kung Hieng (2021) Ultrasonic Assisted Fused Deposition Modeling For Acrylonitrile Butadiene Styrene Waste Recycling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tioh, Keat Soon (2021) Feature based face detection for unconstrained images. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tiong, Jing Yin (2023) Investigating the effect of computer workstation setups on musculoskeletal symptoms, oxygen saturation, and perceived fatigue. Masters thesis, Universiti Teknikal Malaysia Melaka.

Too, Yi Wei (2018) Development Of Computer Ergonomics Risk Assessment (COM-ERA) Tool For Assessing Work-Related Musculoskeletal Disorders (WMSDS) Associated With Computing Tasks. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tuan Nawi, Tuan Muhammad Idzuddin (2021) Influence of water ageing on the fatigue behaviour of rubberwood reinforced recycled polypropylene. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Mohamad, Wan Mohd Farid (2019) Influence Of Mechanical Process On The Stress Corrosion Cracking Of 316L Stainless Steel For Implant Application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Wan Zulkifli, Wan Amirul Shafiz (2018) The effects of surface treatments on properties and corrosion protection of AZ91D magnesium alloy. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wong, Kylie Muh Shin (2017) Sound Absorption Characteristics Of Spent Tea Leaf Fiber-Rubber Composite Materials. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yaakub, Juliana (2015) Synthesis and physico-mechanical analysis of graphene nanoplatelets (GNPs) filled natural rubber/ethylene propylene diene monomer (NR/EPDM) for vibration resistance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yacob, Fariza Fuziana (2015) Mechanical properties of recycling chip aluminium 7075 through powder metallurgy technique. Masters thesis, Universiti Teknikal Malaysia Melaka..

Yap, Ching Yee (2021) The feasibility of quarry dust powder suspension for surface modification of tungsten carbide cobalt. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yasseer, Abdullah (2014) Paddy fiber as an alternative sustainable acoustic absorber material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yiow, Ru Vern (2022) Geometrical design of a two-stroke marine diesel engine crosshead bearing with natural fibre composite material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yuri, Nur Fatin Izzati (2017) Facial Drowsiness Signs Detection Algorithm Using Image Processing Techniques For Various Lighting Condition. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yusup, Muhamad Zaki (2017) Integration model of lean and cleaner production for sustainable and responsive manufacturing in Malaysia. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Farah Ayiesya (2019) Experimental Study Of Flow Around Airfoil Using Dielectric Barrier Discharge Plasma Actuator. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainudin, Zuraidah (2014) Multi objectives optimization of cutting parameters in machining cellulose based hybrid composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zamri, Ruzaidi (2016) Surface Defect Detection And Polishing Parameter Optimization Using Image Processing For G3141 Cold Rolled Steel. PhD thesis, Universiti Teknikal Malaysia Melaka.

Zulkafli, Norizzati (2020) Physico-Mechanical Properties Of Hybrid Cross Ply Banana/Glass Fibre Reinforced Polypropylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkapli, Nor Najihah (2016) Sol Gel Process Of Cobalt Nanopracticles Preparation As Effective Catalyst For CNT Growth Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkifl, Nor Syazana Adilah (2021) Graphene nanoplatelets modified chemlok adhesive system for natural rubber-aluminium bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Patent

Sahbudin Shaari (2013) Asymmetrical Parallel Cascaded Microring Resonator (APCMRR) Filter on Silicon-On-Insulator (SOI) for WDM Network. UKM3.2.29/108/2/742.

Technical Report

Jeefferie, Abdul Razak (2010) Development and mechanical testing of wood composite (WPC) made recycled polymer and recycled wood flour. [Technical Report] (Submitted)