Items where Year is 2025

A

A. Subki, A. Shamsul Rahimi and Arith, Faiz and Kamaruzaman, Dayana and Parimon, Norfarariyanti and Musa, Mohamed Zahidi and Abu Bakar, Suriani and Ahmad, Mohd Khairul and Birowosuto, Muhammad Danang and Vasimalai, Nagamalai and Mamat, Mohamad Hafiz (2025) Influence of aluminium and tungsten impurities on reduced graphene oxide/zinc oxide nanocomposites humidity sensing performance. Applied Physics A: Materials Science and Processing, 131. pp. 1-28. ISSN 0947-8396

Abbasi, Muhammad Inam and Khan, Sher Dali and Dahri, Muhammad Hashim and Mohd Ibrahim, Imran and Sulaiman, Noor Hafizah (2025) X-band and Ku-band PIN diode loaded reflectarray unit cells with adaptive frequency switching. Bulletin of Electrical Engineering and Informatics, 14 (1). pp. 207-215. ISSN 2089-3191

Abd. Latif, Mohd Juzaila and Zahari, Siti Nurfaezah and Zakaria, Mohamad Shukri and Akiah, Masni Azian and Quang, Nguyen Ho and Abdul Kadir, Mohammed Rafiq (2025) Impact of body weight on intervertebral disc: A finite element analysis of lumbar spine total disc replacement. Journal of Mechanical Engineering, 22 (2). pp. 97-110. ISSN 1823-5514

Abdul Rasib, Amir Hamzah and Abdullah, Rohana and Wahyono, F. F.Zubaidi and Ramli, Mohd Irman (2025) Enhancing manufacturing efficiency: A case study on automotive assembly line balancing techniques for improving production capacity. Journal of Engineering Science and Technology, 20 (2). pp. 427-441. ISSN 1823-4690

Abdul Rasid, Ahmad Fuad and Badrul Hisham, Syazuan Hykal and Mohd Zamberi, Mahanum and Tamaldin, Noreffendy and Yang, Zhang (2025) Quantitative study on the combustion characteristics of water-in-oil emulsion droplets using high-speed imaging technique. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 130 (2). pp. 42-54. ISSN 2289-7879

Abdullah, Ayub Khan and Jamil Alsayaydeh, Jamil Abedalrahim and Laghari, Asif Ali and Bacarra, Rex and Alroobaea, Roobaea and Algarni, Sultan and M. Baqasah, Abdullah (2025) Cybersecurity, digital forensics, and the IoT for deepfake investigation on social media platforms: A review. Human-centric Computing and Information Sciences, 15. pp. 1-21. ISSN 2192-1962

Abdullah, Muhammad Ilman Hakimi Chua and Alkahari, Mohd Rizal and Abdollah, Mohd Fadzli and Mohamad Fazdhli, Fawzan Hanafi and Wei, Ignatius Wong Loke and Abdul Khalid, Alif Iqmal and Abdullah, Rohana and Muhamad Damanhuri, Amir Abdullah and Mohamad, Effendi and Puspitasari, Poppy (2025) Impact of geometries on performances and surface morphology of SLS 3D-printed thrust and roller bearings. International Journal of Advanced Technology and Engineering Exploration, 12 (123). pp. 186-200. ISSN 2394-7454

Abu, Nur Azman and Nitaj, Abderrahmane and Kamel Ariffin, Muhammad Rezal (2025) A digital signature on cubic Pell Cryptosystem CP256-1299. International Journal Of Computer Theory And Engineering, 17 (2). pp. 91-101. ISSN 1793-8201 (Submitted)

Abusalama, Jawad (2025) Enhanced multi-agent approaches for efficient evacuation and rescue operations in managing disasters. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Adam, Sabrinah and Mohd Fuzi, Nursyazwani and Ramdan, Mohamad Rohieszan and Ismail, Albert Feisal @ Muhd Feisal (2025) The effectiveness of digital entrepreneurship ecosystem toward enriching income generation: The moderating role of entrepreneurial intention. SAGE Open, 15. pp. 1-16. ISSN 2158-2440

Ahmad, Ibrahim and Samaden, Irma Shayana and Salam, Sazilah and Zahri, Muhammad Edzwan and Murti, Heru Astikasari Setya (2025) The designing gameplay of spiritual journey augmented reality board game to enhance user motivation. Journal of Advanced Research Design, 125 (1). pp. 53-67. ISSN 2289-7984

Ahmad, Khalid Subhi and Al Gburi, Ahmed Jamal Abdullah and Abd Aziz, Mohamad Zoinol Abidin (2025) Compact frequency-reconfigurable slot patch antenna with gain enhancement via metasurface integration. Optik, 333 (172389). pp. 1-16. ISSN 0030-4026

Ahmad, Mohd Nazri and Ishak, Mohamad Ridzwan and Maidin, Nurul Ain and Saharudin, Mohd Shahneel (2025) Water absorption analysis of oil palm fibre reinforced acrylonitrile butadiene styrene composites by fick's law. Journal of Advanced Research in Experimental Fluid Mechanics and Heat Transfer, 20 (1). pp. 150-158. ISSN 2756-8202

Al Gburi, Ahmed Jamal Abdullah and Azzouz, Abdelbasset and Bouhmidi, Rachid and Chetioui, Mohammed and Berber, Redouane (2025) Performance analysis of a rectangular nested fractal antenna for multiband applications. International Journal of Microwave and Optical Technology, 20 (2). pp. 132-140. ISSN 1553-0396

Al Gburi, Ahmed Jamal Abdullah and Bousrout, Abdelmouttalib and Khabba, Asma and Ullah, Atta and Ibnyaich, Saida and Mazri, Tomader and Habibi, Mohamed (2025) Design and measurement of a tiny wideband antenna for deeply embedded biomedical devices. Engineering Research Express, 7 (2). pp. 1-18. ISSN 2631-8695

Al Gburi, Ahmed Jamal Abdullah and Elabd, Rania Hamdy and Amr Hussein, Hussein Abdullah (2025) High-isolation microstrip two-port diplexer and full-duplex antenna with metamaterial-based filters. Discover Applied Sciences, 7 (10). pp. 1-21. ISSN 3004-9261

Al Gburi, Ahmed Jamal Abdullah and Gupta, Anupma and Kumar, Vipan and Garg, Dinesh Kumar (2025) Machine learning-based reflection coefficient and impedance prediction for a meandered slot patch antenna. Materials Science in Semiconductor Processing, 188 (109245). pp. 1-13. ISSN 1369-8001

Al Gburi, Ahmed Jamal Abdullah and Saritha, Vanka and Venkata Naga, Koteswara Rao Devana and Lakshmi, Munagoti Bhagya and Halimi, Md Ahsan and G. S. K., Gayatri Devi and Lavuri, Nageswara Rao (2025) Low-profile four-port MIMO antenna realizing penta-band notches for UWB systems. Optik - International Journal for Light and Electron Optics, 336 (172454). pp. 1-14. ISSN 0030-4026

Ali, Dayana Farzeeha and Ahmad, Aimi Ruzaini and Othman, Nur Fadzilah and Jumaat, Nurul Farhana and Abd Wahab, Nuruljannah and Sundari, Riris Setyo (2025) A systematic review of web-based learning in enhancing visualization skill. Journal of Advanced Research in Applied Sciences and Engineering Technology, 50 (2). pp. 119-142. ISSN 2462-1943

Alias, Azrita and Abd Halim, Wahidah and Azri, Maaspaliza and Mat Lazi, Jurifa and Aihsan, Muhammad Zaid (2025) Analysis of cascaded H-Bridge multilevel inverters using SPWM with multi-sinusoidal reference. International Journal of Power Electronics and Drive Systems (IJPEDS), 16 (3). pp. 1740-1751. ISSN 2088-8694

Almansoori, Abdulla E. (2025) Citizen satisfaction of e-policing system in the UAE. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Alomari, Mohammad Ahmed and Mohammed Al-Andoli, Mohammed Nasser and Ghaleb, Mukhtar and Thabit, Reema and Alkawsi, Gamal and Jamil Alsayaydeh, Jamil Abedalrahim and Gaid, Abdulgoddoos S.A. (2025) Security of smart grid: Cybersecurity issues, potential cyberattacks, major incidents, and future directions. Energies, 18 (1). pp. 1-36. ISSN 1996-1073

Arif, Sazelin (2025) Maqasid syariah tonggak jaminan sistem kawalan makanan halal. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741499

Arith, Faiz and Jusoh, Yaumee Natasha and Aliyaselvam, Omsri Vinasha and Zainal Abidin, Nurul Aliyah and Muhammad Mustafa, Ahmad Nizamuddin and Mohd Shah, Ahmad Syahiman and Salehuddin, Fauziyah (2025) Formulation of Nb-doped ZnO nanoparticles towards improved photo conversion performance via luminescent down-shifting of the incident spectrum. International Journal of Renewable Energy Development, 14 (3). pp. 441-449. ISSN 2252-4940

Asnawi, Ani Liza and Zainal, Nur Aishah and Ibrahim, Siti Noorjannah and Mohamed Azmin, Nor Fadhillah and Harum, Norharyati and Mat Zin, Nora (2025) Utilizing MFCCS and TEO-MFCCS to classify stress in females using SSNNA. IIUM Engineering Journal, Special Issue in Mechanical Engineering, 26 (1). pp. 324-335. ISSN 1511-788X

Awang Md Isa, Azmi and Manap, Zahariah and Darsono, Abd Majid and Zainuddin, Suraya (2025) A review of technologies and techniques for indoor positioning systems. International Journal of Academic Research in Business and Social Sciences, 15 (2). pp. 430-456. ISSN 2222-6990

Azmi, Nur Fatihah and Ismail, Luthffi Idzhar and M. Ramli, Roshahliza and Mushthofa and Hardhienata, Medria Kusuma Dewi (2025) Visualizing anthocyanins: Colorimertic analysis of blue maize. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 46 (1). pp. 201-217. ISSN 2462-1943

B

Balakrishnan, Subatira and Abdullah, Nurlisa Loke and Khoo, Linda Mei Sui and Thambu Raj, Joseph Alagiaraj (2025) Speaking anxiety among TVET undergraduates and its implication on graduate employability. Asian Journal of University Education, 21 (1). pp. 15-29. ISSN 1823-7797

Barkah, Azhari Shouni (2025) Enhancing anomaly detection performance in imbalanced datasets using a deep generative model and Tomeklinks approach. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

C

Chi Adam, Mohd Khairil Anbia and Rassem, Hesham Hussein and Al-Bagawi, Amal H. and Khamidun, Mohd Hairul and Y. A. Alanazi, Tahani and Masood, Najat and Y. Rajeh, Sahar and Magam, Sami Muhsen S. (2025) Phytochemical analysis and antioxidant activity assessment of methanolic extract from jasmine flowers. Engineering, Technology & Applied Science Research, 15 (1). pp. 20258-20263. ISSN 1792-8036

D

Dzakiyullah, Nur Rachman (2025) Multi-label risk diabetes complication prediction model using deep neural network with multi-channel weighted dropout. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

E

Esro, Mazran and Anas, Siti Aisyah and Tuani Ibrahim, Ahamed Fayeez and Jaya Kumar, Yogan and Gannapathy, Vigneswara Rao and Abd Gaus, Yona Falinie and Rajkumar, Sujatha (2025) Non-verbal cues in interactive systems: Enhancing proactivity through winking and turning gestures. Advance Sustainable Science, Engineering and Technology, 7 (1). pp. 1-13. ISSN 2715-4211

F

Fatimah, Siti and Syafrini, Delmira and Yuliana, Yuliana and Antomi, Yudi and Patra, Haldi and Mohamad Sharif, Sabri (2025) The Hidden Paradise; Gap and culture shock in the transformation of a fishing villages into a tourism hotspots in Mandeh region, Indonesia. Cogent Arts and Humanities, 12 (1). pp. 1-14. ISSN 2331-1983

G

Ghazali, Ihwan and Wan Mahmood, Wan Hasrulnizzam and Tanjung, Tia and Herawan, Safarudin Gazali (2025) Drivers and barriers to Industrial Revolution 5.0 readiness: A comprehensive review of key factors. GREEN TECHNOLOGIES AND SUSTAINABILITY, 3 (100217). pp. 1-9. ISSN 2949-7361

H

Hairol Anuar, Siti Haryanti and Abal Abas, Zuraida and Waini, Iskandar and Mukhtar, Mohd Fariduddin and Sun, Zejun and Winanto, Eko Arip and Md Yunos, Norhazwani (2025) Bird flock effect-based dynamic community detection: Unravelling network patterns over time. Alexandria Engineering Journal, 112. pp. 177-208. ISSN 1110-0168

Halim, Isa and Mahadzir, Muhammad Nadzirul Izzat and Abdullah, Zulkeflee and Mafazi, Nurul Wirdah and Kasim, Mohd Shahir and Saptari, Adi (2025) A regression model of hip flexion force of the dominant leg among Malaysian adults in standing posture. Malaysian Journal of Medicine and Health Sciences, 21 (1). pp. 91-102. ISSN 1675-8544

Halim, Isa and Mahadzir, Muhammad Nadzirul Izzat and Abdullah, Zulkeflee and Mohamed Sidek, Muhammad Haikal and Md Ghazaly, Mariam and Saptari, Adi (2025) Development and evaluation of passive exoskeleton (SolatExo) for assisting Muslims with physical disability in Salah. IUM Engineering Journal, 26 (1). pp. 495-523. ISSN 1511-788X

Hossain, Md Showkot (2025) Development and implementation of a three-phase TCHB multilevel inverter using NLC technique for PMSM drive applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

I

Ismail, Erwan and Abdullah Sani, Noorfathehah and Yusof, Yusnita and Abdul Rahman, Nuraini and Abu Bakar, Abu Yazid (2025) Integrating family business values into cultural heritage stewardship at Malacca Heritage World Site, Malaysia. Journal of Ecohumanism, 4 (1). pp. 807-813. ISSN 2752-6798

J

Jamil Alsayaydeh, Jamil Abedalrahim and Bacarra, Rex and Wong, Adam Yoon Khang and Mohd Yaacob, Noorayisahbe and Herawan, Safarudin Gazali (2025) IoT-based smart waste management system: A solution for urban sustainability. International Journal of Safety and Security Engineering, 15 (6). pp. 1173-1183. ISSN 2041-9031

Jano, Zanariah (2025) Cross cultural web design interface. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741352

Jidin, Aiman Zakwan and Hussin, Razaidi and Mispan, Mohd Syafiq and Lee, Weng Fook (2025) A new 13N-complexity memory built-in self-test algorithm to balance static random access memory static fault coverage and test time. International Journal Of Electrical And Computer Engineering (IJECE), 15 (1). pp. 163-173. ISSN 2088-8708

Jingsi, Wang and Liew, Pay Jun and Jiayuan, Wang and Qihang, Cui (2025) Ultrasonic cavitation finishing of 316 L stainless steel using different abrasive particles: A combined SPH simulation and experimental study. Materials Today Communications, 42. p. 111168. ISSN 2352-4928

Jumbri, Isma Addi and Widjajanti, Kesi and Abdul Hamid, Mohd Syaiful Rizal and Lestari, Rohmini Indah and Gilang, Puspita Rini and Bakri, Mohammed Hariri (2025) A conceptual framework for green entrepreneurial orientation and sustainable business performance in emerging Asian markets. Paper Asia, 41 (2). pp. 191-210. ISSN 0218-4540

K

Kanchymalay, Kasturi and Hashim, Ummi Rabaah and Krishnan, Ramesh and Raja Ikram, Raja Rina and Kuhan, R. R. (2025) Deep learning-based prediction model for crude palm oil prices using news sentiment analysis with sliding window. Journal of Artificial Intelligence and Technology, 5. pp. 40-47. ISSN 2766-8649

Kasim, Helmi Mohd and Md Saad, Mohd Shamsuri and Ibrahim, Ismail and Rajikon, Muhd Akmal Noor (2025) Emotional intelligence and online learning readiness among students in a technical university in Malaysia. International Journal of Research and Innovation in Social Science (IJRISS), VIII (XII). pp. 2504-2510. ISSN 2454-6186

Keek, Joe Siang (2025) Modelling of proportional controllers with counter-slippage mechanism for e-pattern omniwheeled cellular conveyor. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Khamis, Alias (2025) Intelligent algorithm based modeling of renewable and green energy resources for microgrid optimization. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Khan, Umair and Khashi’ie, Najiyah Safwa and Vinodkumar Reddy, Mulinti and Malleswari, Kakanuti and Ajithkumar, Moorthi and Elkamchouchi, Dalia H. and Ali, Farhan and Nath, Jintu Mani (2025) Aspects of thermal radiation for the second law analysis of magnetized Darcy–Forchheimer movement of Maxwell nanomaterials with Arrhenius energy effects. High Temperature Materials and Processes, 44 (1). pp. 2025-0083. ISSN 0334-6455

Khang, Adam Wong Yoon and Jamil Alsayaydeh, Jamil Abedalrahim and Mohamat Gani, Johar Akbar and Bascar, Tarani and Awang Teh, Azman and Pusppanathan, Jaysuman and Oliinyk, Andrii (2025) Portable American sign language system using RF signals and IoT technology for deaf-blind people. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 45 (1). pp. 79-89. ISSN 2462-1943

Khashi’ie, Najiyah Safwa and Badrulhisam, Amirrul Luqman and Mohd Rozi, Nurin Faqira and Hamzah, Khairum and Sayed Nordin, Sayed Kushairi and Irianto (2025) Effect of corncob powder on the mechanical behavior of glass fiber/epoxy hybrid composites. ARPN Journal Of Engineering And Applied Sciences, 20 (10). pp. 567-573. ISSN 1819-6608

L

Lee, Qi Zian (2025) Big data technology information extraction and fusion from non-homogenous web data sources. Masters thesis, Universiti Teknikal Malaysia Melaka.

M

Mamat, Mohamad Hafiz and Kamaruzaman, Dayana and Abdul Aziz, Anees and A Subki, A Shamsul Rahimi and Vasimalai, Nagamalai and Abdullah, Mohd Hanapiah and Md Sin, Nor Diyana and Ahmad, Mohd Khairul and Abu Bakar, Suriani and Krishnan, Sandhya Pattoorpady (2025) Triboelectric nanogenerator based on tin doped zinc oxide and polyvinyl alcohol composite thin film for energy harvesting applications. Journal of Advanced Research in Applied Mechanics, 126 (1). pp. 165-177. ISSN 2289-7895 (Unpublished)

Manap, Zahariah (2025) Hybrid indoor positioning utilizing multipath- assisted fingerprint and geometric estimation for single base station systems. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Maslan, Mohamad Haidir and Sheikh, Mohammad Aslam and Ngatiman, Nor Azazi and Zainal, Nurul Amira and Yahaya, Saifudin Hafiz (2025) Development of predictive finite element models for complete contact fretting fatigue. Journal of Advanced Research in Micro and Nano Engineering, 29 (1). pp. 1-13. ISSN 2756-8210

Mat Junos @ Yunus, Siti Aisah and Mohd Chachuli, Siti Amaniah and Mohamad @ Sulaiman, Hanissah and Mohd Said, Muzalifah and Khairol Annuar, Muhammad Arfan and Shamsudin, Nur Hazahsha (2025) Development of a non-invasive CO2 breath sensor with IoT integration. International Journal of Academic Research in Business and Social Sciences, 15 (1). pp. 732-744. ISSN 2222-6990

Md Ghazaly, Mariam and Jaafar, Hazriq Izzuan and Hasim, Norhaslinda and Mohd Sobran, Nur Maisarah and Wong, Min Yee and Abdullah, Zulkeflee and Zainal, Nasharuddin (2025) Design and optimization of a linear fiber-reinforced soft actuator for improved linear motion performance. Bulletin of Electrical Engineering and Informatics, 14 (1). 173 - 183. ISSN 2089-3191

Md Saad, Mohd Shamsuri and Ibrahim, Ismail and Rajikon, Muhd Akmal Noor (2025) Exploring student perspectives on ChatGPT: Knowledge, attitudes, concerns, and usage patterns at Universiti Teknikal Malaysia Melaka. International Journal of Research and Innovation in Social Science (IJRISS), VIII (XII). pp. 2497-2503. ISSN 2454-6186

Md Yunos, Norhazwani and Doroody, Camellia and Jamari, Adibah Hasya and Basiron, Halizah and Abal Abas, Zuraida (2025) Application of sentiment analysis for customer review in the food and beverages industry. International Journal of Computing, 24 (1). pp. 28-34. ISSN 1727-6209

Misha, Suhaimi and Hashem Salem Almshwali, Eslam Ahmed and Mohd Rosli, Mohd Afzanizam and Haminudin, Nor Faizah and Mohd Sa'at, Fatimah Al-Zahrah and Abdul Munir, Fudhail and Ali Al-Abidi, Abduljalil (2025) Review on the air temperature and humidity produce by solar dryer and potential to be reused. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 125 (1). pp. 57-74. ISSN 2289-7879

Mispan, Mohd Syafiq and Kamaruddin, Muhammad Adni and Jidin, Aiman Zakwan and Mohd Nasir, Haslinah and Mohd Nor, Nurul Izza (2025) Low-cost integrated circuit packaging defect classification system using edge impulse and ESP32CAM. International Journal Of Electrical And Computer Engineering (IJECE), 15 (1). pp. 156-162. ISSN 2088-8708

Misran, Mohamad Harris (2025) Enhancement of flat spiral antenna for non-radiated inductive wireless energy transfer. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741383

Mohamad, Effendi and Faishal, Muhammad and Asih, Hayati Mukti and Abdul Rahman, Azrul Azwan and Johanuar, T. and Adiyanto, Okka (2025) Halal principle and operational performance of MSMEs industries: Mediating role of lean six sigma and sustainability. Journal of Advanced Manufacturing Technology (JAMT), 19 (1). pp. 81-98. ISSN 1985-3157

Mohamad, Effendi and Osman, Mohd Khidir and Kamarudin, Nurhayati and A.Rahman, Arfauz (2025) Warehouse operations optimisation through the implementation of lean methodology : A comprehensive review. Multidisciplinary Reviews, 8 (4). pp. 1-12. ISSN 2595-3982

Mohamed, Shahrulanuar and Abu Hassan, Mahadi and Ismail, Erwan and Suradi, Noorsaiyidah and Kudus, Norliah and Ab Rahman, Zaizul and Bakri, Mohammed Hariri (2025) The role of generational diversity in enhancing employee competency development at Malaysia public universities: A literature review. International Journal of Academic Research in Business and Social Sciences, 15 (2). pp. 850-859. ISSN 2222-6990

Mohamed Sultan, Al Amin and Azmi, Fadhlur Rahim and Alghamdi, Ahmed S. and Ahmad Sobri, Sharizal and Mohd Sukri, Nursyahwani (2025) Operational supply risks of halal food manufacturer: A mitigation approach to supply chain risks. Decision Science Letters, 14 (1). pp. 47-62. ISSN 1929-5812

Mohamed Sultan, Al Amin and Faradillah, Pursatul and Samat, Khairul Fadzli and Kamarulzaman, Thahirah (2025) Strengthening e-waste governance: A decision framework for sustainable transboundary movements under the Swiss-Ghana Amendments. Chinese Journal of Population, Resources and Environment, 23. pp. 310-323. ISSN 2096-9589

Mohammed, Dunya Zeki and Al Gburi, Ahmed Jamal Abdullah (2025) Compact, gain-enhanced 5G mmWave antenna with metallic ground-backed reflector for high-speed railway communication systems. High-speed Railway. pp. 1-12. ISSN 2097-3446

Mohammed Ba Amer, Rayan Ahmed (2025) High-Q factor of split ring resonator defected ground structure of microwave sensor for material characterization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ab Halim, Mohd Firdaus and Ab Rahman, Azhan and Mohd Anuar, Mohd Khairol Nizam and Mokhtar, Mohd Hisham (2025) Torque ripple minimization of rotating pole piece concentric magnetic gear using rotor skewing and pole piece modification. Journal Of Engineering Science And Technology, 20 (3). pp. 837-852. ISSN 1823-4690

Mohd Chachuli, Siti Amaniah and Che Aziz, Siti Asma and Muhammad ‘Azmi, Noor Athirah and Shamsudin, Nur Hazahsha and Coban, Omer (2025) Impact of chitosan as a binder in graphene gas sensor for volatile organic compound detection. ChemistrySelect, 10. pp. 1-14. ISSN 2365-6549

Mohd Din, Adilah and Abdullah, Mariam Miri and Othman, Azrina and Mohamad, Norhidayah and Yaacob, Ahmad Zaki (2025) Evaluating the sustainable adoption potential of electric off-road vehicles in Malaysia’s agriculture sector. Paper Asia, 41 (2). pp. 95-107. ISSN 0218-4540

Mohd Hafidzal, Mohd Hanafi and Adnan, Nor Najiha and Razak, Nurul Hanim and Md Yusof, Fahmi Asyadi and Suhaimy, Syazwan Hanani Meriam and Grasianto (2025) Study on mechanical and thermal properties of plasticizer with epoxidation waste cooking oil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 125 (1). pp. 34-41. ISSN 2289-7879

Mohd Rosli, Mohd Afzanizam (2025) Pengenalan bahan berubah fasa dalam bidang kejuruteraan. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741161

Mohd Rosli, Mohd Afzanizam and Cheah, Kai Xiang and Probowo and Herawan, Safarudin Gazali and Teggar, Mohamed and Mitan, Nona Merry Merpati (2025) Numerical investigation on photovoltaic thermal panel using various nanofluids concentrations. CFD Letters, 17 (4). pp. 66-88. ISSN 2180-1363

Mohd Rosli, Mohd Afzanizam and Low, Zi Qing and Salimen, Nurfarhana and Abdul Rashid, Azrin Hani and Herawan, Safarudin Gazali (2025) Assessment of photovoltaic thermal efficiency using phase change material and water-channel collector with T-fin design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 125 (1). pp. 75-93. ISSN 2289-7879

Mohd Sam, Mohd Fazli and Ismail, Albert Feisal @ Muhd Feisal and Hashim, Nik Mohd Zarifie and Mohd Kasim, Noor Shahida and Mat Isa, Siti Sarah (2025) Investigating the sustainable digital business models used by social enterprises to address socio-environmental concerns in Malaysia. International Journal of Research and Innovation in Social Science, IX (II). pp. 820-827. ISSN 2454-6186

Mohd Sam, Mohd Fazli and Ismail, Albert Feisal @ Muhd Feisal and Md. Taib, Mohd Syafiq and Alias, Siti Nur Aisyah and Mohamed, Nurul Hasyimah (2025) Micro-entrepreneurs strategies to revitalise firm performance amid economic uncertainty. International Journal of Research and Innovation in Social Science, IX (1). pp. 4647-4656. ISSN 2454-6186

Mohd Saufi, Nor Salahfiah and Yunus, Ahmad Rozelan and Abdullah, Norida and Mat, Zawiah and Ishak, Nurul Huda and Ahmad Rozelan, Aina Dalila (2025) Application of the trait-Factor theory-Based vocational preference inventory on the government school counsellors in Malaysia. Environment and Social Psychology, 10 (5). pp. 1-12. ISSN 2424-7979

Mohd Yusoff, Norita and Che Aziz, Siti Asma and Husseini Zainol Abidin, Nadiah and Mahdi, Mohd Adzir and Alresheedi, Mohammed Thamer and Ng, Eng Khoon (2025) Q-switched erbium-doped fibre laser via sub-micron nickel particles saturable absorber. Optical Fiber Technology, 90. pp. 1-8. ISSN 1068-5200

N

Neili, Zakaria and Sundaraj, Kenneth (2025) Leveraging CQT-VMD and pre-trained AlexNet architecture for accurate pulmonary disease classification from lung sound signals. Applied Intelligence, 55 (6). pp. 1-19. ISSN 0924-669X

Nik Ghazali, Nik Nazri and Badruddin, Irfan Anjum and Rozali, Shaifulazuar and Abdul Latif, Mohd Faruq and Kamangar, Sarfaraz (2025) Evaluation of mandibular advancement surgery efficacy in treating obstructive sleep apnea: A study on turbulence kinetic energy. Computer Methods and Programs in Biomedicine, 261. pp. 1-21. ISSN 0169-2607

Nizam, Nurul Zarirah (2025) Service marketing in the perspective of industrial revolution 4.0. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741208

Nurhayati, Nurhayati and Al Gburi, Ahmed Jamal Abdullah and Setyono, Mohammad Iyo Agus and Anifah, Lilik and Rakhmawati, Lusia and Iskandarianto, Fitri Adi and Ali, Usman (2025) Studies of corrugated antipodal Vivaldi wideband antenna with notched band and rectenna integration. e-Prime - Advances in Electrical Engineering, Electronics and Energy, 14 (101112). pp. 1-13. ISSN 2772-6711

O

Othman, Intan Sharhida and Munawar, Rose Farahiyan and Liew, Pay Jun and Mohd Abid, Mohd Asyadi Azam and Abd Razak, Jeefferie and Sundi @ Suandi, Syahrul Azwan and Kamis, Shahira Liza and Alhamoudi, Fahad Hussain (2025) Wear behaviour of nickel coatings reinforced by recycled quarry dust: Influence of current density. Journal of Advanced Research in Micro and Nano Engineering, 27 (1). pp. 1-11. ISSN 2756-8210

P

Paijan, Lailatul Harina and Shamsuri, Alin Qistina and Mohd Rosli, Zulkifli and Abu Bakar, Mohd Hadzley and Mamat, Mohd Fauzi and Shaharuddin, Ahmad Shihan (2025) Microstructural characterization and wear properties of steel surface composite coating with TiC nanoparticles through GTAW arcing techniques. Malaysian Journal of Microscopy, 21 (1). pp. 23-33. ISSN 1823-7010

Parthasarathy, Srinivasan and Tan, Lay Hong and Dave, Yagnik and Khant, Ankur and Verma, Lokesh and Chauhan, Megha (2025) The future of personalized medicine and internet of things reshaping healthcare treatment plans and patient experiences. Journal of Intelligent Systems and Internet of Things, 14 (1). pp. 230-240. ISSN 2769-786X

Phuman Singh, Amrik Singh and Leong Zhin, Adam Puah and Mat Darus, Intan Zaurah (2025) Trajectory tracking using optimal tyre force distribution for obstacle avoidance. International Journal of Vehicle Autonomous Systems, 18 (2). pp. 163-189. ISSN 1471-0226

R

Rahmat, Mohd Sabirin and Ahmad, Fauzi and Aparow, Vimal Rau and Ramli, Rizauddin and Mohamed Haris, Sallehuddin and Mohd Sabri, Mohd Anas and Meor Ahmad, Meor Iqram and Mustafa, Mohd Muhyidin (2025) Predictive performance of anti-lock braking system with PID controller optimized by gravitational search algorithm for a quarter car model: Simulation modeling and control. Automotive Experiences, 8 (1). pp. 19-31. ISSN 2615-6202

Ramani, Anis Niza and Abdullah, Nur Syahirah and Arfanuddin, Muhammad Ammar and Baharin, Kyairul Azmi and Tarmizi, Aine Izzati (2025) Performance analysis of underground power cables configuration with different backfill materials. ECTI Transactions on Electrical Engineering, Electronics, and Communications, 23 (2). pp. 1-10. ISSN 1685-9545

Ramli, Rizauddin and Amiri, Mohammad Soleimani and Van, Mien (2025) Swarm-initialized adaptive controller with beetle antenna searching of wearable lower limb exoskeleton for sit-to-stand and walking motions. ISA Transactions, 158. pp. 640-653. ISSN 0019-0578

Rizal, Randi and Selamat, Siti Rahayu and Nur Widiyasono and Siti Yuliyanti and Praseptiawan, Mugi (2025) A forensic intelligence system for identification of data originality based on signature files. Journal of Advanced Research in Applied Sciences and Engineering Technology, 48 (1). pp. 193-204. ISSN 2462-1943

S

Safie, Nur Ezyanie (2025) Graphene based Perovskite solar cells - the rise of emerging photovoltaic technology. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741246

Saleh, Hasan (2025) Human resource management and technology vol 1. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297658933

Saleh, Hasan (2025) Human resource management and technology vol 2. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297784090

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan and Ahmad Jalaludin, Nabilah and Mohd Zain, Anis Suhaila and Arith, Faiz and Md Junos@Yunus, Siti Aisah and Ahmad, Ibrahim (2025) Optimization of perovskite solar cell with MoS2-based HTM layer using hybrid L27 Taguchi-GRA based genetic algorithm. Bulletin of Electrical Engineering and Informatics, 14 (1). pp. 184-196. ISSN 2089-3191

Salim, Fadzilah and Ariff, Azlyn Arissya and Irianto (2025) The development of a smart traffic light system using a solar-powered standalone photovoltaic system. Multidisciplinary Science Journal, 7 (4). pp. 1-9. ISSN 2675-1240

Salim, Mohd Azli and Mohammad Noor, Norida and Masripan, Nor Azmmi and Photong, Chonlatee and Chew, Kit Wayne and Watson, Alan (2025) Cyclic effect on highly thermal hybrid nano-graphene conductive ink. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 127 (1). pp. 106-121. ISSN 2289-7879

Samsudin, Sharatul Izah and Salim, Sani Irwan and Shamsudin, Mustaqim Hakimi and Samsul Bahari, Muhammad Firdhaus and Tong, Angkhana (2025) Enhancing e-waste management with IoT-based monitoring solutions. International Journal of Research and Innovation in Social Science, VIII (XII). pp. 3465-3471. ISSN 2454-6186

Sarkawi, Hafez and Mispan, Mohd Syafiq and Idris, Muhammad Idzdihar and Mohd Ridzuan, Noridah (2025) Output voltage stabilization of non-ideal DC-DC Zeta converter with output voltage error elimination via hybrid control. Journal of Power and Energy Engineering, 13 (1). pp. 18-31. ISSN 2327-5901

Sedek, Muliati and Ahmad Shqirat, Jamil Mahmoud (2025) Factors influencing career advancement among nursing staff in health organizations in East Jerusalem. International Journal of Academic Research in Business and Social Sciences, 15 (3). pp. 476-488. ISSN 2222-6990

Sedek, Muliati and Isnin, Siti Norfatihah and Omar, Siti Rohana (2025) Discovering the impact: Exploring how insider threat drivers relate to organizational performance. International Journal of Academic Research in Business and Social Sciences, 15 (3). pp. 714-729. ISSN 2222-6990

Selamat, Nur Asmiza and Md Ali, Sawal Hamid and Ismail, Ahmad Ghadafi and Ahmad, Siti Anom and Minhad, Khairun Nisa’ (2025) Novel chewing cycle approach for peak detection algorithm of chew count estimation. IEEE Sensors Journal, 25 (1). pp. 803-812. ISSN 1530-437X

Shair, Ezreen Farina and Lee, Teng Hong and Abdullah, Abdul Rahim and Rahman, Kazi Ashikur and Mohd Ali, Nursabillilah and Saharuddin, Nur Zawani and Nazmi, Nurhazimah (2025) Comparative analysis of 1D – CNN, GRU, and LSTM for classifying step duration in elderly and adolescents using computer vision. International Journal of Robotics and Control Systems, 5 (1). pp. 426-439. ISSN 2775-2658

Sukri, Mohamad Firdaus and Mohd Tahir, Musthafah and Jali, Mohd Hafiz and Abdul Kadir, Aida Fazliana and Sulaima, Mohamad Fani (2025) Building power demand and energy consumption forecasting using a data-driven model: A case study in a student hostel. International Energy Journal, 25 (1). pp. 41-54. ISSN 1513-718X

W

Waini, Iskandar and Hamzah, Khairum and Khashi’ie, Najiyah Safwa and Zainal, Nurul Amira and Mohd Kasim, Abdul Rahman and Ishak, Anuar and Pop, Ioan (2025) Stability analysis on reiner-phillippoff hybrid nanofluid flow over a wedge. JP Journal of Heat and Mass Transfer, 38 (1). pp. 77-94. ISSN 0973-5763

Widiyasono, Nur and Rizal, Randi and Selamat, Siti Rahayu and Sinjaya, Angga and Rianto and Praseptiawan, Mugi (2025) Investigation of malware redline stealer using static and dynamic analysis method forensic. Journal of Advanced Research in Applied Sciences and Engineering Technology, 48 (2). pp. 49-62. ISSN 2462-1943

Y

Yahaya, Saifudin Hafiz and Mahdzir, Mira Mazlina and Md Fauadi, Muhammad Hafidz Fazli and Tneh, Tze Yeow (2025) Integrating water quality model and aeration with IoT technology in water quality management: A conceptual framework. Multidisciplinary Science Journal, 7 (3). pp. 1-10. ISSN 2675-1240

Yahya, Mohd Faid and Ab. Majid, Mad Helmi (2025) Gain scheduling for point-to-point PID control of car-like robots under load variations. International Journal of Advanced Technology and Engineering Exploration, 12 (122). pp. 74-89. ISSN 2394-7454

Z

Zainal, Nurul Amira and Zuberi, Haris Alam and Lal, Madan and Singh, Amol and Chamkha, Ali J. (2025) Numerical simulation of blood flow dynamics in a stenosed artery enhanced by copper and alumina nanoparticles. Computer Modeling in Engineering and Sciences, 142 (2). pp. 1839-1864. ISSN 1526-1492

Zainudin, Mohamad Zahir (2025) Strategi pembangunan akademik dan kerjaya di ipt - peluang kedua. Penerbit UTeM Press, Durian Tunggal, Melaka. ISBN 9786297741291

Zakaria, Zahriladha and Abd. Razak, Intan Shafinaz and Al Gburi, Ahmed Jamal Abdullah and Meor Said, Maizatul Alice and Joret, Ariffuddin and Alam, Syah and Palandoken, Merih (2025) A fabric-based double rectangular complementary split ring resonator for wideband applications. Progress In Electromagnetics Research C, 157. pp. 147-158. ISSN 1937-8718

Zakaria, Zahriladha and Al Gburi, Ahmed Jamal Abdullah and Nalanagula, Rajasekhar and Kumari, Runa and Mohammed, Dunya Zeki and Darimireddy, Naresh Kumar (2025) Wideband circularly polarized inverted cup shaped Hybrid Dielectric-Resonator Antenna over an Asymmetric Jerusalem cross-based metasurface. Progress in Electromagnetics Research Letters, 125. pp. 59-66. ISSN 1937-6480

Zulkarnain, Muhammad and Harny, Irianto and Muhamad Damanhuri, Amir Abdullah (2025) Interphase investigation of modified McLachlan model and the 3D finite element method for electrical conductivity. Heliyon, 11 (1). pp. 1-15. ISSN 2405-8440