Browse By Repository:

 
 
 
   

Items where Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Authors | Item Type | No Grouping
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 1625.

Ainifadzilah , Mohamad Esa (2010) Job Clearing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Chee Yoong (2010) Optimization Of Machining Parameters In Turning Process Of Aluminum Alloy 6063. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ali Hanifi , Abd Hamid (2010) Squash Tournament System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Perly , Peh Thai Lee (2010) Intelligent Vacation Planner System Using Ant Colony Optimization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sani Irwan, Md Salim and Abdul Shukur, Jaafar and Azlishah, Othman (2010) The Design and Develop for Control Home Appliancse Via Internet (COHAVI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

A

A. P., Puvanasvaran and M. R., Muhamad and S.T. Kerk, Robert (2010) A Review of Purpose, Benefits, Impediments and Structure of Environmental Management System (EMS). Australian Journal of Basic and Applied Sciences, 4 (10). pp. 4710-4716. ISSN 1991-8178

A. P., Puvanasvaran and A. R. , Ismail and N., Jusoh and A. Z. , Ismail and M. H. , Abu Bakar and W. H. W. , Deraman (2010) ERGONOMICS ASSESSMENT OF WORKSTATION DESIGN IN AUTOMOTIVE INDUSTRY. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

A. P., Puvanasvaran and S.T. Kerk, Robert and A. R., Ismail (2010) A CASE STUDY OF KAIZEN IMPLEMENTATION IN SMI. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

A. P., Puvanasvaran and S.T.Kerk, Robert and A. R. , Ismail (2010) WORK STUDY IMPROVEMENT FOR CUERVO (ANALOG) PRODUCT IN AN ELECTRONIC INDUSTRY. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

A. R. , Ismail and N. , Jusoh and A. P. , Puvanasvaran and M. S. , Reza (2010) A CASE STUDY OF OCCUPANT ENVIRONMENTAL COMFORT AT AUTOMOTIVE ASSEMBLYWORKSTATION. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

ABD RAZAK , JEEFFERIE and Mohd Salled, Mohamad Amran and Abd Rashid, Suraya and Ahmadun, Fakhrur'Razi and Ibrahim, Nor Azowa (2010) The Effects of Lower Percentages of Filler Addition to the Mechanical and Morphological Properties of PP/MWCNTs Composites. Journal of Advanced Manufacturing Technology (JAMT) , 4 (1). pp. 1-12. ISSN 1985-3157

ABDULLAH, Mohd Azman and MICHITSUJI, Yohei and Takehara, Shoichiro and NAGAI, Masao and Miyajima, Naoki (2010) SWING-UP CONTROL OF MASS BODY INTERLINKED FLEXIBLE TETHER. T H E A R C H I V E O F M E C H A N I C A L E N G I N E E R I N G. pp. 115-131. ISSN 2300-1985

AR, Jeefferie and MY, Yuhazri and Omar, Nooririnah and MM, Haidir and Sihombing, Haeryip and mohd, salleh and NA, Ibrahim (2010) Thermo mechanical and morphological interrelationshio of polypropylene-multiwalled carbon nanotubes nanocomposites. International Journal of Basic & Applied Sciences, 10 (4). pp. 29-35. ISSN 2077-1223

Ab Ghani, Mohd Ruddin (2010) BEKC 4683: Sistem Kawalan Digit. [Teaching Resource]

Ab Ghani, Mohd Ruddin (2010) BEKC 4683: Sistem Kawalan Digit. [Teaching Resource]

Ab Ghani, Mohd Ruddin (2010) BEKC 4683: Sistem Kawalan Digit. [Teaching Resource]

Ab Ghani, Mohd Ruddin and KASDIRIN , HYREIL ANUAR (2010) DEVELOPMENT OF ADVANCED CONTROL SYSTEMS FOR COMPARISON STABILITY STUDY OF A ROBOTIC LEG APPLICATION. Project Report. UTeM, UTeM.

Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff (2010) Customized Fault Management System for Low Voltage (LV) Distribution Automation System. In: Fault Detection. InTech, pp. 51-70. ISBN 978-953-307-037-7

Ab Ghani, Mohd Ruddin and Mat Hanafiah, Mohd Ariff (2010) Development of Customized Distribution Automation System (DAS) for Secure Fault Isolation in Low Voltage Distribution System. In: Programmable Logic Controller. InTech, pp. 131-150. ISBN 978-953-7619-63-3

Ab Ghani, Mohd Ruddin and Mat Youb, Norsarizan and Sakidin, Hamzah and Syed Najib , Syed Salim (2010) Active Suspension using Optimal Controller. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Ab Ghani, Mohd Ruddin and Mat Youb, Norsarizan and Sakidin, Hamzah and Syed Najib , Syed Salim (2010) A COMPARATIVE STUDY OF PASSIVE AND ACTIVE SUSPENSION FOR AUTOMOBILE APPLICATIONS. In: 2010 National Postgraduate Seminar (NAPAS 2012) Bridging Postgraduate rsearch Towards Industry Linkage and Future Innovation, 2010/7/6, Shah Alam, Selangor.

Ab Ghani, Mohd Ruddin and Mohd Amin, Nur Huda and Kasdirin, Hyreil Anuar (2010) Modeling of the Disc Speed. In: Postgraduate Seminar, Faculty of Electrical Engineering, UTeM 2010, 2010/6, UTeM.

Ab Ghani, Mohd Ruddin and Sakidin, Hamzah and Syed Najib , Syed Salim (2010) ACTIVE SUSPENSION USING OPTIMAL CONTROLLER. Project Report. UTeM, UTeM.

Ab Ghani, Mohd Ruddin and Tay, Choo Chuan and Bugis, Ismadi (2010) SIMPLER MAPPING FUNCTION FOR GPS TROPOSPHERIC DELAY. Project Report. UTeM, UTeM.

Ab Rahman, Mohd Nizam and Khamis, Nor Kamaliana and Mohd Zain, Rosmaizura and Md Deros, Baba and Wan Mahmood, Wan Hasrulnizzam (2010) Implementation of 5S Practices in the Manufacturing Companies: A Case Study. American Journal of Applied Sciences. pp. 1182-1189. ISSN 1546-9239

Ab Razak, Juhari and MUSA@OTHMAN, MASJURI and Ayob, Md Razali and Hassan, Muhammad Zahir and Abd. Rahman, Md. Nizam and Sopian, Kamaruzzaman (2010) Pico Hydro Application for Off-Grid Settlement. In: World Renewable Energy Congress XI, 25-30 September 2010, Abu Dhabi, UAE.

Ab. Rahman, Mahmood (2010) BMFP 2522: Kualiti Dan Kebolehpercayaan (Quality And Reliability). [Teaching Resource]

Ab. Rahman, Mahmood (2010) BMFP 3523: Pengurusan Kualiti Menyeluruh (Total Quality Management). [Teaching Resource]

Ab. Rahman, Mahmood (2010) BMFP 4563: Strategi Pembuatan (Manufacturing Strategy). [Teaching Resource]

Abd Ghani, M. K. and Bali, R. K. and Naguib, R. N.G and Marshall, I. M. and Wickramasinghe , N. S. (2010) Critical analysis of the usage of patient demographic and clinical records during doctor-patient consultations: a Malaysian perspective. Int. Journal Healthcare Technology and Management, 11 (1/2). pp. 113-130. ISSN 2010.033279

Abd Halim Hakim, Abd Aziz (2010) BMFG 2813: Termo Bendalir (Thermo Fluids). [Teaching Resource]

Abd Halim Hakim, Abd Aziz (2010) BMFG 2813: Termo Bendalir (Thermo Fluids). [Teaching Resource]

Abd Halim Hakim, Abd Aziz (2010) BMFR 4123: Pembuatan Pantas (Rapid Manufacturing). [Teaching Resource]

Abd Manaf, Mohd Edeerozey (2010) Mechanical Properties of Kenaf Bast and Core Fibre Reinforced Unsaturated Polyester Composites. IOP Conf. Series: Materials Science and Engineering, 11 (012006). pp. 1-6. ISSN 1757-899X

Abd Manaf, Mohd Edeerozey (2010) Modification of orientation birefringence of cellulose ester by addition of poly(lactic acid). European Polymer Journal, 46. pp. 2269-2274. ISSN 0014-3057

Abd Manap, Nurulfajar (2010) Face detection and stereo matching algorithms for smart surveillance system with IP cameras. In: 2010 2nd European Workshop on Visual Information Processing (EUVIP), July, 2010, Paris, France.

Abd Manap, Nurulfajar (2010) Multi-view Video Coding for 3DTV. In: Malaysia Glasgow Doctoral Colloqium (MGDC), January, 2010, SECC, Glasgow UK.

Abd Manap, Nurulfajar (2010) Multi-view Video Coding for Wireless Channel. In: International Symposium on Broadband Communications (ISBC), July, 2010, Melaka.

Abd Manap, Nurulfajar (2010) Smart surveillance system based on stereo matching algorithms with IP and PTZ cameras. In: 2010 3DTV-Conference: The True Vision - Capture, Transmission and Display of 3D Video, 7-9 June 2010, Tampere, Finland.

Abd Rahman, Dullah (2010) BMCU 1323: Proses Pembuatan. [Teaching Resource]

Abd Rahman, Md Nizam (2010) BMFS 2513: Proses Pembuatan 1 (Manufacturing Processes 1). [Teaching Resource]

Abd Rahman, Md Nizam (2010) BMFS 2533: Proses Pembuatan (Manufacturing Processes). [Teaching Resource]

Abd Salam, Md Tahir (2010) DMCS 2323: Mekanik Pepejal I. [Teaching Resource]

Abd Samad, Hasan Basari (2010) BITI 2113: Agen Pintar. [Teaching Resource]

Abd Shukur, Ja'afar (2010) BENT 4133: Pemprosesan Isyarat Digit. [Teaching Resource]

Abd. Samad, Hasan Basari (2010) MITI5613: Theory Of Computation. [Teaching Resource]

Abdollah, M. F. and Mas'ud, M. Z. and Sahib, S. and Selamat, S. R. and Yusof, R. (2010) Collaborative Security Mechanism in Detecting Intrusion Activity. In: International Conference on Engineering and ICT, 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Abdollah, Mohd Fadzli bin and Yamaguchi, Y. and Akao, T. and Inayoshi, N. and Umehara, Noritsugu and Tokoroyama, Takayuki (2010) Raman Spectroscopy Study of Impacted DLC Coatings. In: Interatioal Tribology Congress - ASIATRIB 2010, 5-9 December 2010, Perth, Australia.

Abdollah, M. F. (2010) Penetrating the Virus Monitoring and Analysis System Using Delayed Trigger Technique. In: 2010 the International Conference on Intelligent Network and Computing (ICINC 2010), November 26 - 28, 2010, Kuala Lumpur, Malaysia.

Abdollah, M. F. and Mas'ud, M. Z. and Mat Ariff, N. A. and Erman, Hamid and bahaman, Nazrulazhar (2010) Establishment of IPv6 Network on Intranet Environment. International Journal of Network and Mobile Technologies (IJNMT. pp. 67-73. ISSN 1832-6758

Abdollah, M. F. and Mas'ud, M. Z. and Sahib, S. and Yusof, R. and Selamat, S. R. and Yaacub, A. H. (2010) Time Based Intrusion Detection on Fast Attack for Network Intrusion Detection System. In: 2010 Second International Conference on Network Applications, Protocols and Services, 22-23 September 2010, Holiday Villa Hotel, Kedah.

Abdollah, M. F. and Mas'ud, M. Z. and Yusof, R. and Selamat, S. R. (2010) Statistical Approach for Validating Static Threshold in Fast Attack Detection. Journal of Advanced Manufacturing Technology, 4 (1). pp. 53-71. ISSN 1985-3157 Jan-June 2010

Abdollah, Mohd Fadzli bin (2010) Phase transformation studies on the a-C coating under repetitive impacts. Surface & Coatings Technology, 205. pp. 625-631. ISSN 0257-8972

Abdollah, Mohd Fadzli bin and Yamaguchi, Yuto and Akao, T. and Inayoshi, N. and Tokoroyama, Takayuki and Umehara, Noritsugu (2010) The effect of maximum normal impact load, absorbed energy and contact impulse on the impact craters volume/depth of DLC coating under repetitive impacts. In: JAST Tribology Conference 2010, 14-17 September 2010, Fukui, Japan.

Abdul Azim, Roslan (2010) An Application Of 3D Modelling And Simulation Analysis In The Development Of Consumer Product Design (Folding Bicyle). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Aziz, Rozi (2010) Analysis And Measurement Of Optical Fiber Channel Doubler (OFCD). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hafiz, Abd Hamid (2010) Air Conditioning System Powered By Small Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hakam, Mohd Ridza (2010) Effect Of Particle Size And Fuel Type On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Halim, Dahalan (2010) DENT 1213: Prinsip Elektrik. [Teaching Resource]

Abdul Hamid, Hamidon (2010) MENE5013: Advanced Electronic Design. [Teaching Resource]

Abdul Hasif, Abdul Halim (2010) A Study On Short Term Load Forecasting Using Back Propagation Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Hayyan, Abdul Halim (2010) The Study Of E6013 Electrode Effect On Microstructure Of Difference Mild Steel Thickness By Using Arc Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Majid, Izaidin (2010) ENTERPRISE AS A CAREER: ENTREPRENEURSHIP EDUCATION IN MALAYSIA’S PUBLIC HIGHER LEARNING INSTITUTIONS. In: International Conference of Education, Research & Innovation (ICERI), 15-18 Nov 2010, Madrid, Spain.

Abdul Majid, Izaidin and Abd Razak, Muhammad Hafiz and Abdul Wahab, Noor Akmal (2010) Understanding Strategic Reactiveness Influences on Entrepreneurial Management Tendencies. In: International Conference for Engineering and ICT 2010, 18-2- Feb 2010, Melaka.

Abdul Majid, Izaidin and Aman, Othman and Tahir, Md. Nor Hayati and Abdul aziz, Nor Azah and Rahmiati, Filda (2010) THE SUCCESS FACTORS OF FOOD SMALL MEDIUM ENTREPRENEURS UNDER THE ONE DISTRICT ONE INDUSTRY PROGRAMME: A CASE ON FOOD MANUFACTURING ENTREPRENEURS IN MELAKA. In: 2nd International Conference on Enterpreneurship , 11-12 October 2010, Vistana Hotel Kuala Lumpur .

Abdul Majid, Izaidin and Cooper, Sarah and Ismail , Kamariah and Kamarudin, Mohd Fauzi (2010) ENTREPRENEURSHIP EDUCATION AND TRAINING IN MALAYSIA’S PUBLIC HIGHER LEARNING INSTITUTIONS. In: Malaysian Technical Universities Conference on Engineering and Technology (MUCET), 28&29 June 2010, Melaka.

Abdul Majid, Izaidin and Ismail, Kamariah and Aman, Othman (2010) EXPLORING ENTREPRENEURSHIP EDUCATION AND TRAINING IN MALAYSIA’S PUBLIC HIGHER LEARNING INSTITUTIONS. In: International Colloqium on Business & Management (ICBM), 25-28 Jan 2010, Bangkok Thailand.

Abdul Majid, Izaidin and Ismail, Kamariah and Mason, Colin and Cooper, Sarah and Wan Omar, Wan Zaidi (2010) DO THE CHARECTERISTICS OF TECHNOLOGY LEAD TO UNIVERSITY PATENTS BEING UNEXPLOITED? Jurnal Teknologi, UTM. pp. 105-128. ISSN 52 Mei 2010: 105–128

Abdul Majid, Izaidin and Ismail, Kamariah and Wan Omar, Wan Zaidi (2010) The commercialisation process of patents by universities. In: 3rd International Colloqium on Business & Management (ICBM), 25-28 Jan 2010, Bangko Thailand.

Abdul Majid, Izaidin and Ismail, Kamariah and Wan Omar, Wan Zaidi and Cooper, Sarah and Mason, Colin (2010) University Spin-off Formations: How decision making process has been made? International Journal of Business and Social Science. pp. 1-21. ISSN Vol. 1 No. 2

Abdul Majid, Izaidin and Md. Saad, Mohd Shamsuri and Yahya, Aziz and Abd. Razak, Mohd Hafiz (2010) Exploring the Relationship between Strategic Reactiveness and Entrepreneurial Management Tendencies. In: IBIMA Conference, 6&7 Nov 2010, Cairo, Egypt.

Abdul Majid, Izaidin and Md. Saad , Mohd. Shamsuri and Yahya, A. (2010) Knowledge Management and Performance in Franchise-Structured Organisation. In: 15th IBIMA Conference, 6-7 Nov 2010, Cairo, Egypt.

Abdul Majid, Izaidin and Ngeng, Miang Hong and Wong, Lai Soon and Buang, Nor Aisyah (2010) Does Social Value Matters in the Consumption of Fast Food. In: “International Borneo Business Conference (IBBC 2010), 13-15 December 2010, Miri Sarawak.

Abdul Majid, Izaidin and Yahya, A. and Md. Saad, Mohd. Shamsuri and Ramachandran, Sharimllah Devi and Jano, Zanariah (2010) The Emergence of Global Leadership Competencies: A New Model for Malaysian Small and Medium Entrepreneurs (SME) Leadership Competencies. In: 15th IBIMA Conference, 6-7 Nov 2010, Cairo, Egypt.

Abdul Malik, Yusuf (2010) Design And Development Of Autonomous Robot Using Digital Fiber Optic Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Manap, Redzuan and Esro, Mazran and Basari, Amat Amir and Ahmad, Badrul Hisham (2010) Performance Analysis of Block Matching Algorithms in Motion Estimation. In: International Conference on Computer and Communication Engineering 2010, 11-13 May 2010, Kuala Lumpur.

Abdul Manap, Redzuan and Ranjit, S.S.S. (2010) Performance Analysis of Hexagon-Diamond Search Algorithm for Motion Estimation using MATLAB. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 2 (2). pp. 73-80. ISSN 2180-1843

Abdul Manap, Redzuan and Ranjit, S.S.S. and Basari, Amat Amir and Ahmad, Badrul Hisham (2010) Performance Analysis of Hexagon-Diamond Search Algorithm for Motion Estimation. In: International Conference on Computer Engineering and Technology (ICCET2010), 16-18 April 2010, Chengdu, China.

Abdul Munir, Fudhail and Sidik, N.A.C and Mohamad Zin, Mohd Rody and Hassan, Muhammad Zahir and Mohd Tahir, Musthafah (2010) Numerical Simulations of Shear Driven Square and Triangular Cavity by Using Lattice Boltzmann Scheme. World Academy of Science, Engineering and Technology, 45 (0045:2). pp. 190-194. ISSN 2010-3778

Abdul Rahman, Mohd Nazim (2010) BMCD 2573: Rekabentuk Kejuruteraan. [Teaching Resource]

Abdul Rahman , Mat Rejab (2010) Develop Heating System Using By Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman and Chairulsyah, Abdul Wasli (2010) 5.8 GHz Low Noise Amplifier for Front End Receiver. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Rani, Othman (2010) BENT 3153: Elektronik Telekomunikasi. [Teaching Resource]

Abdul Razak, Hussain (2010) DITP 3113: Pengaturcaraan Berorientasikan Objek. [Teaching Resource]

Abdul Razak, Abdul Rahman (2010) Mobile Robot Multiple Sensor Behaviour For Obstacle Avoidance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Abdul Samad , Shibghatullah (2010) BITI 2213: Sistem Berasaskan Pengetahuan. [Teaching Resource]

Abdul Shukor , Fairul Azhar and Misron, Norhisam and Khamis, Alias and Raja Othman, Raja Nor Firdaus Kashfi and Nirei, Masami and Wakiwaka, Hiroyuki (2010) Optimization of structure parameter of linear oscillatory actuator for high thrust characteristics and mobility performance. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Melaka, Malaysia.

Abdul Shukor , Fairul Azhar and Shukor , Ahmad Zaki and Jamaluddin, Muhammad Herman (2010) DESIGN OF THREE PHASE MULTI FREQUENCY INVERTER. Project Report. Universiti Teknikal Malaysia Melaka. (Submitted)

Abdul Talib, Din (2010) BMCN 4543: Rekabentuk Mekanisma. [Teaching Resource]

Abdul Talib, Din (2010) BMCU 4032: Etika Kejuruteraan. [Teaching Resource]

Abdul-Latip, S. F. and Reyhanitabar, M. R. and Susilo, W. and Seberry, J. (2010) On the Security of NOEKEON against Side Channel Cube Attacks. In: ISPEC 2010.

Abdullah, Rohana and Ahmad, Nurul Huda (2010) Development of Automated Maynard Operation Sequence TEchnique (MOST) Work Study Technique: Case Study at Aerospace Manufacturing Company Using Lean Six Sigma. In: 3rd International Conference on Science and Technology: Applications in Industry and Education, 16-17 Dec 2010, The Gurney Resort Hotel and Residence, Penang.

Abdullah, Aida Nasirah and Hussin, Hanipah and Hasan, Hazmilah and Kalthom, Hussain and Aziz , Yahya (2010) Best Website of Practices by Malaysian Environmental NGOs: A Comparative Study. Proceedings of International Conference on Communication Dynamics 2010. pp. 417-432. ISSN 978-983-2948-75-9

Abdullah, Norida and Ninggal, Mohd Tajuddin (2010) Moderators of job-search intensity, self-esteem and career decision-making. Proseminar Psikologi kebangsaan 2010. pp. 1-16. ISSN 978-083-2641-61-2

Abdullah, Norida and Ninggal, Mohd. Tajudin (2010) The relationship between self-esteem, job-search intensity and career decision-making among graduating students. Proceedings of International Conference on Communication Dynamics 2010. pp. 13-32. ISSN 978-983-2948-75-9

Abdullah, Rohana and Saptari, Adi and mohamad, Nor Akramin (2010) Manpower Optimization and Process Efficiency Improvement at a Textile Manufacturing Company. In: Waset 2010, 24-26 Feb 2010, Bayview Hotel, Georgetown, Penang.

Abdullah, Rosmiza Wahida and Abdul-Aziz, Azlianor and Sulong, Muhammad Suhaizan (2010) Engineering the Quality in Internet Application for Commerce. In: Regional Conference on Knowledge Integration in ICT (INTEGRATION), 1 Jun 2010, Putrajaya, Malaysia.

Abu, Maisarah and A. Rahim, Mohamad Kamal (2010) A Meandered Triple-band Dipole Antenna with 920 MHz Artificial Magnetic Conductor. In: 2010 IEEE International Sympossium on Antennas and Propagation (APS 2010), 11-17 July 2010, Sheraton Centre Hotel, Toronto, Ontario, Canada.

Abu, Maisarah and A. Rahim, Mohamad Kamal (2010) TRIPLE-BAND PRINTED DIPOLE ANTENNA WITH SINGLE-BAND AMC-HIS. Progress In Electromagnetics Research B, 20. pp. 225-244. ISSN 1937-6472

Abu, Maisarah and A. Rahim, Mohamad Kamal and Suaidi, Mohamad Kadim and Mohd Ibrahim, Imran and Mohd Nor, Norazura (2010) A Triple-band Dipole Antenna with 0.92 GHz AMC-HIS. In: International Conference on Computer and Communication Engineering 2010, 13 - 15 May 2010, Kuala Lumpur.

Abu Bakar, Norazhar (2010) BEKC 3553: PLC & Kawalan Proses. [Teaching Resource]

Abu Bakar, Baharudin (2010) DMFD 3333: Teknologi CNC (CNC Technology). [Teaching Resource]

Abu Bakar, Norazhar (2010) BEKC 1123: Instrumentasi & Pengukuran. [Teaching Resource]

Adi, Saptari (2010) MMFU5033: Management Of Global Manufacturing Operations. [Teaching Resource]

Adib, (2010) DACS 2212: Matematik Kejuruteraan. [Teaching Resource]

Adnan, Hassan (2010) Simulation Study On Active Ambulance Stretcher. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afidatul Nadiah, Azizan (2010) Scuba Diving Online. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah, Mohd Fauzi (2010) The Implementation Of Risk Management At Aerospace Manufacturing Company : Case Study 1 (Safety). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Afifah Maheran, Abdul Hamid (2010) BENM 2133: Sistem Digit. [Teaching Resource]

Ahamed Fayeez, Tuani Ibrahim (2010) DENG 2223: Asas Elektronik Dan Mikropemproses. [Teaching Resource]

Ahmad, I. and Shahbodin, F. and Othman, A. (2010) Mathematics Courseware for Autism children. In: Regional conference on Knowledge Integration in ICT 2010, 1 June 2010, Putrajaya, Malaysia.

Ahmad, Mohd Riduan (2010) A Survey of Low Duty Cycle MAC Protocols in Wireless Sensor Networks. In: Emerging Communications for Wireless Sensor Networks. INTECH. ISBN 978-953-307-082-7

Ahmad, Mohd Riduan and Dutkiewicz, Eryk and Huang, Xiaojing and Suaidi, M. Kadim (2010) Optimal Cooperative MIMO Scheme in Wireless Sensor Networks. In: Radio Communications. INTECH, Croatia, EU, pp. 151-166. ISBN 978-953-307-091-9

Ahmad, N. (2010) Cluster identification and separation in the growing self-organizing map: Application in protein sequence classification. Neural Computing and Applications, 19 (4). pp. 531-542. ISSN 0941-0643

Ahmad, N. (2010) Generating concept trees from dynamic self-organizing map. Proceedings of World Academy of Science, Engineering and Technology, 65. pp. 706-711. ISSN 2010-376X

Ahmad, Rivai (2010) BMCS 4063: Getaran Struktur. [Teaching Resource]

Ahmad, Rivai (2010) BMCS 4343: Analisis Struktur & Fem. [Teaching Resource]

Ahmad , Arfah (2010) DACS 2222: Persamaan Pembezaan. [Teaching Resource]

Ahmad , Arfah (2010) BACS 2212: Statistik. [Teaching Resource]

Ahmad , Arfah (2010) BEKA 2453: Statistik & Kaedah Berangka. [Teaching Resource]

Ahmad , Yaakob (2010) Evaluation Study On Static Analysis Of Automotive Brake System Using Numerical Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Aizan, Zulkefle and Ahmad Idil, Abdul Rahman and Maslan, Zainon and Zaihasraf, Zakaria (2010) Analysis of Lightning and Switching Waveshapes Using TMS320VC5416 DSP Processor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz, Hamzah (2010) Analysis Of Lubricant Performance For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Faiz , Mohd (2010) Analyzing DNS Query And Response. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Farid, Mohamad (2010) Smart Casing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fariz , Dzolkhifli (2010) Fast Track Patient Consultation. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Firdaus, Mohammad Mohsin (2010) Design Of Automotive Chassis Electrical System Training Board. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Firdaus, Mohd Azmi (2010) System Development Of An Initiation Sequence Using Face Recognition Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fitri, Sukarman (2010) Implementation Of Design For Manufacturing And Assembly (DFMA) Methodology To Analyze Antitheft Device System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Fuad, Ab Ghani (2010) BMCG 1153: Dinamik. [Teaching Resource]

Ahmad Idil, Abdul Rahman and Ahmad Aizan, Zulkefle and Ahmad Fairuz, Muhammad Amin and Maslan , Zainon and Mohd Ridzuan, Rozali (2010) Automatic Speaker Identification System for Robot Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Jamal, Salim (2010) BENC 4113: Organisasi Dan Senibina Komputer. [Teaching Resource]

Ahmad Jamal, Salim (2010) BENM 4123: Reka Bentuk Ic. [Teaching Resource]

Ahmad Naim, Ismail (2010) Identification And Reduction of Noise And Vibration level On Rear Handle Of Handheld Tools Using Fast Fourier Transform (FFT) Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Nizam, Mohd Jahari and Shahrum Shah, Abdullah and Khairul Azha, A. Aziz (2010) Vertical motion controller design of an underwater vehicle. In: 3rd International Conference on Underwater System Technology: Theory and Applications 2010 (USYS'10), 1st & 2nd November 2010, Cyberjaya.

Ahmad Nizam, Mohd Jahari @ Johari (2010) BENE 4123: Pneumatik Industri. [Teaching Resource]

Ahmad Noh , Salleh (2010) Design Analysis And Simulation Of A Railing System Security Cage At Taman Buaya. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Ridzwan, Mohd Noor and Mahadi, Abu Hassan and Siti Rohana, Omar and Zawiah, Mat (2010) Impak Pembangunan Universiti Teknikal Malaysia Melaka (UTeM) ke Atas Pembangunan Fizikal Negeri Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rijal , Abdul Rahman (2010) Maintenance Monitoring System Using Visual Basic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rozelan, Yunus (2010) Psychosocial Well-Being of Intrepreneurs. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Rozelan, Yunus and Rusnani, Abdul Kadir and Amir, Aris and Mukhiffun, Mukapit (2010) KESELARASAN PERSONALITI–PERSEKITARAN PENDIDIKAN DENGAN PENCAPAIAN AKADEMIK PELAJAR. In: SPKS2010 Seminar Psikologi Kebangsaan 2010, 28-29 Oktober 2010, Kota Kinabalu, Malaysia. (Unpublished)

Ahmad Rozelan, Yunus and Syed Najmuddin, Syed Hassan and Amir, Aris and Rusnani, Abdul Kadir (2010) KESELARASAN PERSONALITI DENGAN PERSEKITARAN PENGAJIAN: SATU TINJAUAN PERBANDINGAN DI KALANGAN PELAJAR JURUSAN PENGURUSAN DUA BUAH IPTA DI MALAYSIA. In: SPKS 2010 Seminar Psikologi Kebangsaan , 28-29 Pktober 2010, Kota Kinabalu, Malaysia. (Unpublished)

Ahmad Sabri, Mohamed (2010) Pemindahan Haba Di Dalam Rumah Dengan Menggunakan Rockwool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, (2010) BENE 4153: Instrumentasi Proses. [Teaching Resource]

Ahmad Sadhiqin, Mohd Isira and Adi, Mohd Khafe and Zamre, Abdul Ghani (2010) Active Steering System Based on Nonlinear Control System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira and Adie, Mohd Khafe and Mazran, Esro and Zamre, Abdul Ghani (2010) Wireless Voice Controlled Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Sadhiqin, Mohd Isira (2010) BENE 4143: Pembuatan Automatik. [Teaching Resource]

Ahmad Saifulnizam , Amron (2010) Heat Treatment And Mechanical Property Of Ti6A14V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Shaarizan, Shaarani (2010) BITM 1113: Sistem Multimedia. [Teaching Resource]

Ahmad Shaarizan, Shaarani (2010) DITM 3612: Alatan Pengarangan Macromedia Dreamweaver. [Teaching Resource]

Ahmad Suzaimy, Sukor (2010) Renewable Energy (Wind Power) Mini Prototype Plant With Scada System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Syafiq , Juwaini (2010) Analyze Bonet Activity By Identify The Difference Between Normal And Abnormal DNS Traffic. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ahmad Syahir , Zulkiffli (2010) Effect Of Coil Size To Performance Of Linear Moving Coil DC Motor On Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Tajuddin, Samsudin (2010) Increasing Service Quality Of Multimedia Streaming Using Hybrid Peer-To-Peer Model. PhD thesis, UTeM.

Ahmad Tarmizi, Md Nor (2010) Coordination Protection System In Industrial Plants. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Yusairi, Bani Hashim (2010) BMFA 4433: Aplikasi Robot (Robot Application). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2010) BMFA 4433: Aplikasi Robot (Robots Application). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2010) BMFA 4473: Robotik Termaju (Advanced Robotics). [Teaching Resource]

Ahmad Yusairi, Bani Hashim (2010) BMFA 4473: Robotik Termaju (Advanced Robotics). [Teaching Resource]

Ahmad Yusoff, Hassan (2010) Seminar Unified Communication (UC) Dan Malaysian Research Education Network (MYREN). [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Industrial Advisory Panel Dinner 2010. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Anugerah Akademik (AAU) UTeM 2010. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Anugerah Sukan UTeM 2010. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Iftar Bersama T.Y.T Tun Canselor. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Makan Malam 'The 2nd International Conference On Engineering & ICT (ICEI 2010)'. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Menandatangani Konsesi Asrama Secara Penswastaan (BLMT) Antara UTeM Dengan Pengurusan Konsesi Asrama Sdn. Bhd. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Pembukaan Persidangan Antarabangsa 'The 2nd International Conference On Engineering & ICT (ICEI 2010)'. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Penutup Kejohanan Olahraga Kali Ke-3 UTeM 2010. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Penyampaian Watikah Kepada Majlis Perwakilan Pelajar (MPP) Sesi 2010-2011. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Perasmian International Conference On Communication Dynamics (ICCD 2010). [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Perasmian Karnival Kerjaya UTeM 2010. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Perutusan Naib Canselor UTeM Tahun 2010. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Pesta Cahaya 2010 Peringkat UTeM. [NC Speech] (Submitted)

Ahmad Yusoff, Hassan (2010) Majlis Sambutan Aidilfitri 1431H. [NC Speech] (Submitted)

Ahmad Za'im, Zulkefli (2010) Design And Fabrication Of Heat Exchanger - Radiato. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ahmad Zubir , Jamil (2010) BEKE 2533: Pemacu Dan Penggerak Elektrik. [Teaching Resource]

Ahmad Zulhelmi, Ab Hamid (2010) Cooperative Space-Time Block Coding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aida, Johari (2010) Smart Window Shade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aidil Azhiim , Shamsuddin (2010) Short Term Load Forecasting With Fuzzy Logic Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aiman Hilmi, Azhar (2010) Design Of Low Noise Amplifier For WiMAX Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aimi Faridah , Tajuddin (2010) Power Flow Allocation In Deregulated Power System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aisha , Abd Ghani (2010) Design And Development A Line Following Mobile Robot For Multipurpose Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aishah , Mazelan (2010) Effect Of Re-solution Heat Treatment Temperature On The Impact Toughness Of An Aluminum Alloy For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Akmal, Abdul Manap (2010) The impact of tourism innovation on quality of life of residents in the community: a case study of Sungai Melaka. Masters thesis, UTeM.

Al-Amani, Umar (2010) Preparation of Neodymium Substituted Bismuth Titanate by a Fuel-Free Combustion Process. In: International Conference on Materials Processing Technology 2010, January 5-6, 2010, Bangkok, THAILAND.

Al-Amani, Umar (2010) Synthesis and Dielectric Properties of Bi4-xNdxTi3O12 obtained by solution combustion synthesis. In: 4th Colloquium on Materials, Minerals and Polymers 2010 (MAMIP 2010), 27th – 28th January 2010, Vistana Hotel, Penang.

Al-Amani, Umar (2010) Low-temperature combustion synthesis of Bi4Ti3O12 plate-like structure and some of its characteristics. Malaysian Journal of Microscopy. pp. 69-74. ISSN 1823 7010

Ali, Fara Ashikin (2010) DEKA 1213: Fizik. [Teaching Resource]

Ali, Mohd Basri Ali (2010) EVALUATING CHARPY IMPACT SIGNALS USING POWER SPECTRUM DENSITIES:A FINITE ELEMENT METHOD APPROACH. International Journal of Mechanical and Materials Engineering , 6 (1). pp. 92-101. ISSN 1823-0334

Alias , Khamis and Azhar, Ahmad and Azhan, Ab. Rahman (2010) Compressed Air Energy Storage for Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Alias , Khamis and Kyairul Azmi , Baharin and Azhan , Ab. Rahman (2010) BEKC 1323: Instrumentasi Dan Pengukuran. [Teaching Resource]

Alif Zulfakar, Pokaad (2010) The Effectiveness Of Active Front Bumper System For Frontal Impact Protection Using Magnetorheological. Masters thesis, UTeM.

Alyaa Izzati, Hashim (2010) Study And Preliminary Design Of High Speed Impact Test Machine Using Hopkinson Bar Test Principle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amat Amir, Basari (2010) BENG 1113: Prinsip Elektrik Dan Elektronik. [Teaching Resource]

Amat Amir, Basari and Khairuddin, Osman (2010) BEKG 2323: Prinsip Kawalan. [Teaching Resource]

Amer Adli, Mohd Dzainudin (2010) Study Of The Effect Of Temperature And Relative Humidity On The Measurement Variance Conducted In The Metrology Lab, FKP. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir, Azuwaizie (2010) Implementation of RFID Technology At The Zoo Entrance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amir Syarifuddin, Kasim (2010) BITP 3353: Pangkalan Data Multimedia. [Teaching Resource]

Amirul Farhan, Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Farhan , Mohd Salih (2010) Design A Bending Machine For Bowl Feeder Attachment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amirul Shafiq, Hsan Baseri (2010) Solar-Powered Electric Bicycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amiza, Abu (2010) Monitor And Control Greenhouse Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Amni, Mohamed Zain (2010) Disaster Alert Intelligent System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ang, Sei Qi (2010) Develop A Linear Measurement Sensor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aniza, Othman and Rosleen, Abd. Samad and Hidayah, Rahmalan and Norasiken, Bakar (2010) Feature Extraction Software Tool (Fest:Colour) Colour Extraction of Images and 3D Visualization of Colour Histogram in Cielab Colour Space. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Anton, S P and Samsi , Md. Said and M.A., Burhanuddin (2010) Logic Algorithm for contour following task: An evaluation using Adept SCARA Robot. International Journal of Computer Sciences and Engineering Systems, 4 (3). pp. 185-190. ISSN 0973-4406

Anuar, Mohamed Kassim (2010) Study on moving control of multi-legged type hopping robot using adaptive CPG networks. Masters thesis, University of Tokushima.

Anuar , Mohamed Kassim (2010) BEKM 3553: Pemprosesan Isyarat Digital. [Teaching Resource]

Anuar , Mohamed Kassim (2010) Moving Control of Quadruped Hopping Robot Using Adaptive CPG Networks. In: 2010 IEEE Conference on Robotics Automation and Mechatronics (RAM), , June 28-30 , 2010, Singapore.

Arep@Ariff, Hambali and Minhat, Mohamad (2010) Concurrent Decisions using Analytical Hierarchy Process at the Conceptual Design Stage. Journal of Advanced Manufacturing Technology (JAMT) , 5 (1). pp. 79-85. ISSN 1985-3157

Arif, Ahmad (2010) Numerical Prediction Of Solid Waste Combustion In An Updraft Gasifier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arifah Maheran, Abdul Hamid and Sani Irwan, Md Salim and Wong, Yan Chiew and Zarina, Mohd Noh (2010) BENM 2123: Teknologi Mikropemproses. [Teaching Resource]

Ariff, Idris (2010) DITG 3113: Teknologi Maklumat Pembuatan. [Teaching Resource]

Arina , Zakaria (2010) Study On Shock-Absorbing Properties Of Square Tube Strengthening Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Arisita Duwi, Sapit (2010) Design Of Power Amplifier For Radio Over Fiber Technology (ROF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Asmai, S. A. and Hussin, B. and M. Yusof, M. (2010) A Framework of an Intelligent Maintenance Prognosis Tool. In: Second International Conference on Computer Research and Development, 2010 , 7-10 May 2010 , Kuala Lumpur.

Asri , Din (2010) BEKE 1233: Peranti Elektronik & Sistem. [Teaching Resource]

Asriana, Ibrahim (2010) DACS 2222: Persamaan Pembezaan. [Teaching Resource]

Asyadi Azam, Mohd and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko and Shimoda, Tatsuya (2010) Controlling the growth of vertically aligned single walled carbon nanotubes from ethanol for electrochemical supercapacitor application. In: 8th International Symposium on New Materials for Electrochemical Systems, 11-15 July 2010, Shanghai, China.

Asyadi Azam, Mohd and Mohamed, Mohd Ambri and Shikoh, Eiji and Fujiwara, Akihiko (2010) Controlling the growth of single-walled carbon nanotubes using alcohol catalytic CVD method. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Awang Md Isa, Azmi (2010) Utilising MIMO for Location and Positioning in IMT -Advanced Systems. In: 2010 IEEE Student Conference on Research and Development (SCOReD 2010), 13 - 14 Dec 2010, Putrajaya, Malaysia.

Awangku Mohd Hazmin , Awang Zainal (2010) Study Of The Effect Of Variable Speed Fan On The Radiator Cooling System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azah Kamilah, Muda (2010) BITI 3133: Rangkaian Neural. [Teaching Resource]

Azah Kamilah, Muda (2010) BITI 3313: Pemprosesan Dan Pengecaman Imej. [Teaching Resource]

Azahari, Salleh and Abd Shukur, Ja'far and Mohamad Zoinol Abidin, Abd. Aziz and Zulkifli, Shariff (2010) RF Front End Design Of Radio Access Point For Radio Over Fiber Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azahari, Salleh (2010) BENT 2123: Isyarat Dan Sistem. [Teaching Resource]

Azahari, Salleh (2010) BENT 2143: Analisis Rangkaian. [Teaching Resource]

Azahari, Salleh and Abd Shukur, Ja’far and Mohamad Zoinol Abidin, Abd. Aziz and Zulkifli, Shariff (2010) Reconfigurable Beamforming Network By Using Passive Phase Shifter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azan Hariz , Ab Latif (2010) Nonlinear Controller For Gantry Crane Based On Partial Feedback Linearization. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azdiana, (2010) BENE 1183: Instrumentasi Elektronik. [Teaching Resource]

Azfar Nazmi , Nikmatlah (2010) Validation Of Bar Vibration By Using FEA. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azhar , Ahmad (2010) Optimization Of Coil And Permanent Magnet Of Linear Oscillatory Actuator For High Thrust Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziah, Khamis and Intan Azmira, Abdul Razak and Azhan, Abdul Rahman and Nur Hakimah, Ab. Aziz and Hyreil Anuar, Kasdirin and Kyairul Azmi, Baharin (2010) Design and Development of Solar Power Mover. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azie , Rasid (2010) Virtual Reality Driving Games. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azinuddin Akmal, Abdul Aziz (2010) Design And Development Of An Automated Sorting System In Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aziz, Yahya (2010) COMMUNICATION SKILLS AS AN ENABLER TO KNOWLEDGE TRANSFER IN SMEs. Journal of Human Capital Development, VOL.3 (NO.2). pp. 1-13. ISSN 1985-7012

Aziz , Yahya and Safiah , Sidek and Aida Nasirah, Abdullah and Kalthom, Hussain and Rahman, Hashim and Hanipah, Hussin and Hazmilah, Hasan (2010) Relationship between Technological Frames and Technology Transfer. Proceedings of International Conference on Communication Dynamics 2010. pp. 377-393. ISSN 978-983-2948-75-9

Azizah , Shaaban (2010) BMFP 4573: Undang-Undang Industri Dan OSHA (Industrial Laws And OSHA). [Teaching Resource]

Azizul Halim, Abd Rahman (2010) Fiber Optic Based Line Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azma, Putra (2010) BMCM 3743: Getaran Mekanikal. [Teaching Resource]

Azma, Putra (2010) BMCM 2733: Getaran Mekanikal. [Teaching Resource]

Azman, F. N. and Dolhalit, M. L. and Shahbodin, F. (2010) MULTIMEDIA TOOL FOR BASIC LITERACY: ADOPTING APPLIED PHONETICS. In: Malaysia International Centre for English Language Teaching.

Azmin , Ahmad (2010) The Effect Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules On The Performance Of 1.3L 4G13 Wira Engine. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Azmir, Mat Zain (2010) Design Of MR Fluid Base Brake System For Motorcycle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azmir, Abu Samah (2010) Optimization Of Louvered Plate Angle Using CFD Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Aznor Juyantie, Ibrahim (2010) Patient monitoring through short message service (SMS). Masters thesis, UTeM.

Azrai, Muhammad (2010) Programming Of An Automated Pick And Place Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azrul Affendi, Atan (2010) Design Optimization Of A Boiler Furnace. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Azwan , Baharudin (2010) The Analysis Of Current Carrying Capacity Of PCB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

B

Badrul Hisham, Ahmad and Dato' Prof. Dr Mohd Nor, Husain and Prof Madya Tan Kim, See (2010) A novel hybrid notch (hn) substrate integrated waveguide (SIW) bandstop filter. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), UTeM , 2 (2). pp. 13-17. ISSN 2180-1843

Badrul Hisham , Ahmad and Noor Azwan , Shairi and Redzuan , Abdul Manap (2010) The development of Rectangular Waveguide Bandpass Filter. In: The 2nd International Conference on Engineering and ICT , February 2010, Melaka, Malaysia, February 2010, Melaka.

Badrun , Bandi (2010) UTeM E-Market Place. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bahaman, Nazrulazhar and Mas'ud, Mohd Zaki and Hamid , Erman and Abdollah, Mohd Faizal and Mat Ariff, Nor Azman (2010) Establishment of IPv6 Network on Intranet Environment. International Journal of Netwok and Mobile Technologies, 1 (2). pp. 67-73. ISSN 1832-6758

Bahari, Norhazilina (2010) Application of Differential Evolution to Determine the HEPWM Angles of a Three Phase Voltage Source Inverter. In: IECON 2010 - 36th Annual Conference of IEEE Industrial Electronics, 7 - 10 November 2013, Phoenix, AZ, USA.

Bahari, Norhazilina (2010) Selective Harmonics Elimination PWM (SHEPWM)Using Differential Evolution Approach. In: Joint International Conference on Power Electronics, Drives and Energy Systems (PEDES) & 2010 Power India, 2010 , 20th - 23rd Dec 2010, Indian Institute of Technology Delhi & India Habitat Center, New Delhi, India.

Bakar, N. (2010) Pendekatan Pembelajaran Makmal Maya. Penerbit Universiti Teknikal Malaysia Melaka, Hang Tuah Jaya, 76100 Durian Tunggal, Melaka, Malaysia. ISBN 978-983-2948-85-8

Bakar, N. and Badioze Zaman, H. (2010) Pengujian Makmal Maya Kimia Berasaskan Pendekatan Kognitivisme, Konstruktivisme dan Konteksual. Jurnal Teknologi Maklumat dan Multimedia, 8. pp. 35-49. ISSN 1823-0113

Bakar, N. and Salam, S. (2010) e-Pembelajaran@UTeM. In: e-Pembelajaran di IPTA Malaysia. Pusat Pembangunan Akademik Universiti Kebangsaan Malaysia & Jabatan Pengajian Tinggi Kementerian Pengajian Tinggi Malaysia, Malaysia, pp. 253-268. ISBN 978-967-5878-21-3

Bakar, N. and Shahbodin, F. and Salam, S. and Ahmad, I. (2010) Development of Virtual Learning for Chemistry Subject based on Constructivism-Contextual Approach. In: 4th International Symposium on IT, 15-17 JUNE 2010, KL, MALAYSIA.

Bani Hashim, Ahmad Yusairi and Abu Osman, Noor Azuan and Wan Abas, Wan Abu Bakar and Abdul Latif, Lydia (2010) Analysis of Shalat Gait. International Journal of Open Problems in Computer Science and Mathematics, 3 (4). pp. 552-562. ISSN 1998-6262

Basar, M.F.M. and M.R., Sapiee and Hishamudin, L.M. and Zakaria, N. and Yusof, N.M and Wahid, N. (2010) A Study on the Wind and Geothermal as a Potential of Renewable Energy Sources in Malaysia. In: ICEI2010 - THE 2ND INTERNATIONAL CONFERENCE ON ENGINEERING AND ICT, 18-20th February 2010 , Melaka.

Basari, A. S. H. and Hussin, B. (2010) Genetic Algorithm for Event Scheduling System. Journal of telecommunication, electronic and computer engineering . pp. 81-85. ISSN 2180-1843

Basari, A. S. H. and Idris, A. and Herman, N. S. (2010) Practical Database Design for Industrial Maintenance System. In: INTERNATIONAL SYMPOSIUM ON INFORMATION TECHNOLOGY 2010 (ITSim’10) , 15-17/6/2010, KL Convention Centre.

Bok , Chiew Loon (2010) Emission Characteristic Of Alkaline-Catalysts Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Bokhari, Mohamad and Saadan, Rosli and Syed Najmuddin , Syed Hassan and Rajikon, Muhd. Akmal and Nor Fazilah, Abdul Hamid (2010) Pengaruh Status Sosio Ekonomi (SES) Dan Personaliti Terhadap Pencapaian Akademik Pelajar : Kajian Kes Terhadap Pelajar-pelajar UTeM. In: Seminar Psikologi Kebangsaan 2010, 2010, USIM.

Burairah, Hussin (2010) BITI 2113: Pengaturcaraan Logik. [Teaching Resource]

Burairah, Hussin (2010) MTKM5093: Information Technology And E-Commerce. [Teaching Resource]

Burhanuddin, Mohd Aboobaider (2010) BITI 3143: Pengkomputeran Evolusi. [Teaching Resource]

Burhanuddin, M. A. and Burhanuddin , Mohd Aboobaider (2010) Siri Mudah Membangun Aplikasi Mobile: TIP and TRIK FLASH LITE. In: Siri Mudah Membangun Aplikasi Mobile: TIP and TRIK FLASH LITE. NIL, 1 (NIL). Venton Publishing, Malaysia, pp. 1-157. ISBN NIL

C

Chan, Hong Ket (2010) Study Of Internal Heat Exchanger Effects On Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Horng Tat (2010) Study On Haar Classsifier For Machine Learning System That Can Detect Specified Object In Vision System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Wai Teng (2010) PC Based Motor Control With SMS Aplicatoin. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chan, Yi Xian (2010) Analyzing VOIP With Video Conferencing In IPV6 Platform. Project Report. UTeM. (Submitted)

Che Mohd Elyas, Che Omar (2010) Investigation Of Shaft Speed Cause By Turbo System In Vehicles. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Roslee, Che Remle (2010) Short Term Load Forecasting With Time Series Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Che Wan Mazlan, Che Wan Mat Zin (2010) Sound Detecting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chee, Jiann Tong (2010) Develop A Rotating Speed Sensor System With Link To Visual Basic.Net. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chelvakumari, Arumugam (2010) Plant Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chen, Pick Wei (2010) Study On Computer Aided Manufacturing (CAM) Software For A XY Table Positioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Cheng, S.Y. (2010) On the aerodynamic damping mechanism of vehicle pitching stability using Large Eddy Simulation. In: The 24th Computational Fluid Dynamics Symposium, 20 – 22 December 2010, Tokyo, Japan.

Cheong, En Yi (2010) Smart Car Alarm System Using Pic Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chew , Chu Chee (2010) AES And DES Data Encryption System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chiam, See Luan (2010) Bluetooth Quiz System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Kok Yet (2010) A Sensorless Speed Identifier Using Adaptive Digital Filtering Technique. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Wai Pick (2010) Study Of Aircraft Propeller - Structural Strength. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chin, Yi Shian (2010) An Application Of P Control Chart To A Pager Assembly Line. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Shin Horng (2010) Practical Controller Design For Precision Motion Systems. PhD thesis, Tokyo Institute of Technology.

Chong, Kuan Eng (2010) BMFP 4623: Pemodelan Dan Simulasi (Modelling And Simulation). [Teaching Resource]

Chong, Kuan Eng (2010) BMFP 4623: Simulasi Dan Pemodelan (Modeling And simulation). [Teaching Resource]

Chong, Kuan Eng (2010) MMFD 5023 : Supply Chain Management. [Teaching Resource]

Chong, Kuan Eng (2010) MMFD5023: Supply Chain Management. [Teaching Resource]

Chong, Man Yuen (2010) Bidirectional Converter For Renewable Energy Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chong, Shin Horng (2010) BEKC 3533: Pengantar Sistem Kawalan. [Teaching Resource]

Chong, Shin Horng (2010) Practical controller for precision positioning system - A new design approach and application to mechanism with friction. In: American Society of Precision Engineering Meetings 2010, April 2010, MIT Cambridge USA.

Chong , Florance Sook Kuan (2010) Patient Appointment System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Chong , Kuan Eng (2010) A Technique For Balancing And Smoothing Multi-Constraint Assembly Lines. PhD thesis, UTeM.

Choo, Wai Sun (2010) Navigating UTeM In Virtual Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choo, Yun Huoy (2010) BITI 2223: Pembelajaran Mesin. [Teaching Resource]

Choo, Yun Huoy (2010) BITI 3123: Logik Kabur. [Teaching Resource]

Choo, Jia Huey (2010) The Impact Of Purchasing Strategies Towards Manufacturing Performance In Malaysian Food And Beverage Manufacturers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Choong , Lay Swan (2010) E-Recycle System Model : A Study On Plastic, Paper And Disc. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua, Joe Shing (2010) E-Fict Information System Based On Web And SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Ka Hui (2010) A Study On The Quality Of Micro Hole Machining Of Tungsten Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Chua , Wee Kok (2010) GPS Implementation On Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Connie, Bato (2010) The Influence Of Aging Time To Mechanical Properties On Aluminum Silicon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

D

Dila Afnida, Azman (2010) Feasible Study On Characterization And Comparison Of Accelerated Life Tests And The Compatible Software For Automotive Component. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Din, Abdul Talib and Rahimi, Roslina Aida (2010) A Numerical Analysis on Double Acting Telescopic Pneumatic Cylinder Motion Characteristics. In: 2010 International Conference on Mechanical and Aerospace Engineering, 16th till 18 April 2010, Chengdu China.

Din , Abdul Talib and Ali, Yusoff and Abdullah, Shahrir and Rahimi , Roslina Aida (2010) FUNDAMENTAL DEVELOPMENT AND THE DESIGN OF AN EFFICIENT CASCADE AERATOR. In: 10th International Conference on Modelling, Monitoring and Management of Water Pollution, 9 - 11 June 2010, Bucharest, Romania. (Submitted)

Din , Abdul Talib and Rahimi, Roslina Aida and Abdul Kadir, Mustafar (2010) A numerical analysis on double acting pneumatic telescopic cylinder motion characteristics. In: Proceeding for 2010, 2nd International Conference on Computer Engineering and Technology, Chengdu, China. Proceeding for 2010 2nd International Conference on Computer Engineering and Technolgy, 5 (11521797 IEEE Catalogue No: CFP1067F-PRT). IACSIT, Chengdu, China (Sichuan University). ISBN 978-1-4244-6350-3

Dzulhisham, Aminuddin (2010) Reliability Study On Automotive Component Using Design Failure Mode And Effect Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

de Lillo, Liliana and Empringham, Lee and Wheeler, Patrick and Khwan-on, Sudarat and Gerada, Christopher and Othman, Md Nazri and Huang, Xiaoyan (2010) Multiphase Power Converter Drive for Fault-Tolerant Machine Development in Aerospace Applications. Industrial Electronics, IEEE Transactions on (Volume:57 , Issue: 2 ) , Volum (Issue:). pp. 575-583. ISSN 0278-0046

E

E. A., Azrulhisham and Y. M., Asri and A. W. , Dzuraidah and N. M., Nik Abdullah and A. , Shahrum and C. H., Che Hassan (2010) Evaluation Of Fatigue Life Reliability Of Steering Knuckle Using Pearson Parametric Distribution Model. International Journal of Quality, Statistics, and Reliability, 2010. pp. 1-8. ISSN 1687-7152

Effendi, Mohamad (2010) BMFP 4523: Pembuatan Lean (Lean Manufacturing). [Teaching Resource]

Elleen, Oh Lilien (2010) Learn Basic Mandarin Language By Mobile Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Elyas, Talib (2010) A Study Of The Productivity In Stayrod Manufacturing. Masters thesis, UTeM.

Emaliana, Kasmuri (2010) BITP 2223: Keperluan Dan Rekabentuk Perisian. [Teaching Resource]

Emaliana, Kasmuri (2010) BITP 3113: Pengaturcaraan Berorientasikan Objek. [Teaching Resource]

Erman, Hamid (2010) BITS 2333: Analisa Dan Rekabentuk Rangkaian. [Teaching Resource]

Erman, Hamid (2010) DITS 3612: Asas Rangkaian Cisco. [Teaching Resource]

Erman, Hamid and Mas'ud, M. Z. and Mat Ariff, N. A. and Abdollah, M. F. and Nazrulazhar , Bahaman (2010) The Significance of IPv6 Research Lab Activity in Enhancing Teaching and Learning of IPv6 Deployment. In: The 3rd Regional Conference on Engineering Education, 7-9 JUne 2010, Kuching.

Ernie, Mat Tokit (2010) DMCS 1313: Statik. [Teaching Resource]

Ernie, Mat Tokit (2010) DMCT 3133: Termodinamik II. [Teaching Resource]

Esmar, Budi (2010) Modeling Of Reactively Sputtered TiAIN Coating On Tungsten Carbide Insert Tool : Its Properties And Cutting Performance In Dry Turning Of AISI D2 Steel. PhD thesis, UTeM.

Ezreen Farina, Shair (2010) Direct Adaptive Predictive Control For Wastewater Treatment Plant. Masters thesis, Universiti Teknologi Malaysia.

F

Faaizah, Shahbodin (2010) BITM 3113: Pengurusan Projek Media Interaktif. [Teaching Resource]

Faaizah, Shahbodin and Norasiken, Bakar and Ibrahim, Ahmad and Muhammad Haziq Lim, Abdullah (2010) Development and Testing of an Assessment Technique Using Problem Based Learning Approach: a Case Study on FTMK Human Computer Interaction (HCI) Course. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadhli, Syahrial (2010) Ujikaji Terhadap Enjin Pembakaran Gas Asli Termampat (CNG) Kajian Terhadap Prestasi Enjin Gas Asli Termampat (CNG) Yang Telah Diubah Suai. Masters thesis, UKM.

Fadila, Mohd Atan (2010) Cooperative Spatial Multiplexing In Wireless Sensor Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fadilah , Mohd Zain (2010) Design And Development An Underwater Glider Using Remote Control (RC). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faihsal Hidayah , Suduri (2010) Rekabentuk Penyidai Pakaian Automatik Dan Boleh Laras Untuk Kegunaan Domestik (Retractable Automatic Cloth Hanger For Domestic Use). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairul Azhar, Abdul Shukor and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin (2010) Design of Three Phase Multi Frequency Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fairul Azhar , Abdul Shukor (2010) BEKE 2443: Elektronik Kuasa. [Teaching Resource]

Faizil, Wasbari (2010) DMCF 2213: Mekanik Bendalir I. [Teaching Resource]

Fakrulradzi, Idris (2010) DENC 3363: Kejuruteraan Komputer. [Teaching Resource]

Fakrulradzi, Idris and Noor Shahida, Mohd Kasim (2010) Performance Analysis on Data Transmission Over Wimax. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fakrulradzi, Idris (2010) BENT 3173: Komunikasi Data dan Rangkaian. [Teaching Resource]

Farah Nadia, Azman (2010) BITG 2113: Rekabentuk Web Dan E-Dagang. [Teaching Resource]

Farah Nadia, Azman (2010) DITM 2123: Pengaturcaraan Web. [Teaching Resource]

Farah Shahnaz, Feroz and Yosza, Dasril and Hanissah, Mohamad @ Sulaiman and Nor Azlina, Abdul Razak (2010) Sms Application Development in a Vision System and Statistical Applications in Vision-Based Quality Control Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farah Zunurain, Ab Latif (2010) High Voltage And Impulse Test On Industrial Pipeline. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farahdiana , Mastor (2010) SMS Based Wireless Home Appliance Control System And Security. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Farhan , Hanaffi (2010) BEKP 4683: Kejuruteraan Voltan Tinggi. [Teaching Resource]

Farid Arafat, Azidin and Zulkarnain, Zainuddin and Yusmarnita, Yusof and Puteri Suriyani, Megat Wazir (2010) Develop Angular Speed Detection System Using Infrared Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Farid Arafat, Azidin (2010) BEKG 1413: Teknologi Elektrik. [Teaching Resource]

Farizan, Saleh (2010) E-Sticker & Summon System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Faten Nadia, Mansor (2010) Tank Water Level Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fathin Afiqah , Ghazali (2010) Microstrip Fractal Array Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fauzi, Abdul Wahab (2010) BENT 4173: Sistem Pensuisan Telekomunikasi. [Teaching Resource]

Fauzi, Abdul Wahab (2010) DENT 3563: Kejuruteraan Telekomunikasi. [Teaching Resource]

Fauzi Adi, Rafrastara (2010) Constructing Polymorphic Virus Analysis System Using Behavior Detection Approach. Masters thesis, UTeM.

Fauziyah, Salehuddin (2010) Impact of SALICIDE and Source/Drain Implants on Leakage Current and Sheet Resistance in 45nm NMOS Device. Journal of telecommunication, electronic and computer engineering , 2 (1). pp. 35-41. ISSN 2180-1843

Fazly, Buang (2010) Modeling And Simulation Of Horizontal Wind Turbine Blade. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Febrian, Idral (2010) Conceptual Of A Single Seater Formula Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Filda, Rahmiati (2010) Innovations In Restaurant Operation Towards Improving Performance A Case Of Restaurants In Melaka. Masters thesis, UTeM.

Fiona Aprilynce Jane, Janang (2010) Iban English Dictionary With Logic Programming Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Firdaus Hakimi, Hassan (2010) Determination Of The Optimum Design Parameters For A Family Mould. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Fitrian , Imadduddin (2010) Control Of Pneumatically Actuated Active Suspension System Using Multiple Proportional - Integral With Knowledge - Based Fuzzy. Masters thesis, UTeM.

Fleschutz, Timo and Abdul Rahman, Azrul Azwan and Harms, Robert and Seliger, Günther (2010) Assessment of Life Cycle Impacts and Integrated Evaluation Concept for Equipment Investment. In: 17th CIRP International Conference on Life Cycle Engineering (LCE 2010), 19-21 May 2010, Hefei, Republic of China.

Fong, Wong Keat (2010) Development Of Timetabling Program. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Fudhail, Abdul Munir (2010) BACS 1223: Persamaan Pembezaan. [Teaching Resource]

Fudhail, Abdul Munir (2010) BACS 1223: Persamaan Perbezaan. [Teaching Resource]

Fudhail, Abdul Munir (2010) BMCU 1062: Persamaan Perbezaan. [Teaching Resource]

G

Gaithri, Balakrisnan (2010) Restaurant Food Ordering System (REFORDS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Gan, Bee Geok (2010) Mechanical And Thermal Properties Of Pure Nickel As An Alternative Automotive Body Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan, May Hui (2010) Secure Entry Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gan Eng, Hong (2010) Factors That Contribute To The Failure Of Rfid Usage In Supply Chain. Masters thesis, UTeM.

Ganesh , Kumar and Sivarao, Subramonian and T., Joseph Sahaya Anand (2010) Intermetallic Nickel Aluminides as alternating Automotive Body Materials. In: National Conference on Advanced Manufacturing & Material Engineering 2010, 25th to 26th May 2010, Universiti Tun Hussein Onn Malaysia, Johor.

Ganesh Kumar, K. and Sivarao, Subramonian and T., Joseph Sahaya Anand (2010) An overview of Intermetallic Nickel Aluminides (Ni3Al) as an alternative Automotive Body Material. International Conference on Design and Concurrent Engineering. pp. 132-135. ISSN 983-2948-84-1

Gannapathy, Vigneswara Rao (2010) DENE 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Ghafar, Jenal (2010) Stand-Alone Photovoltaic (PV) System Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ghazali, Mohamad Firdaus and Shibghatullah, Abdul Samad and Sahib, Shahrin (2010) WiMAX: Network Entry Phase Optimization for Bandwidth Improvement Solution. In: In Proc. 4th International Symposium on Broadband Communication (ISBC 2010), 11-14 July 2010, Melaka.

Goh, Mik Chen (2010) Development Of Wi-Fi Access Point For Controlling Serial Port. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Hooi Fen (2010) Real Time Medical Inventory Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , Vivian Mew Cheoung (2010) FTMK Virtual Tour. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Goh , E-Theng (2010) An Analysis Of Breast Cancer Prediction Using Data Mining Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Gui , Kheng Leng (2010) Window Hardening For Window Server 2003. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Gunasegaran, Vijaya Kumaran (2010) Identification Of Causes Of Varation In The Semiconductor Manufacturing Processes By Statistical Analysis A Six Sigma Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

H

H Haery, IP (2010) BMFP 4512: Pengurusan Industri Dan Kos (Industrial Management And Cost). [Teaching Resource]

H Haery, IP (2010) BMFP 4513: Perancangan & Kawalan Pengeluaran (Production Planning & Control). [Teaching Resource]

H Haery, IP (2010) BMFP 4542: Pengurusan Projek (Project Management). [Teaching Resource]

H Haery, IP (2010) BMFS 3313: Simulasi Sistem Pengeluaran (Simulation In Production System). [Teaching Resource]

Hady, Efendy (2010) BMCB 4463: Komposit Dan Bahan Termaju. [Teaching Resource]

Hady, Efendy (2010) BMCM 4473: Bahan Komposit. [Teaching Resource]

Hady, Effendy (2010) BMCS 4453: Teknologi Bahan. [Teaching Resource]

Hafizah, Jamil (2010) FKEKK Components Database. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafizah , Abd Wahab (2010) FTMK E-Leave System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hafizah , Ka'ab (2010) Development Of Intelligent Traffic Light Control Using Fuzzy Logic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hafrizah Ashidah , Abdul Halim and Badrul Hisham , Ahmad and Peng Wen, Wong (2010) Microwave Dual Mode Resonator Matched Bandstop Filter. In: 2010 Indonesia-Malaysia Microwave-Antennas Conference (IMMAC 2010) , 11-12 June 2010, Jakarta, Indonesia.

Hairul, Bakri (2010) BMCB 4073: Tribologi. [Teaching Resource]

Hairul , Bakri (2010) BMCS 1323: Mekanik Pepejal I. [Teaching Resource]

Halimah , Abd Halim (2010) Design Improvement On Trimming Workstation For Aerospace Company Based On Ergonomics Analysis (Case Study at CTRM AC Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hambali, Arep & Ariff (2010) BMFR 4143: Rekabentuk Pembuatan Dan Pemasangan (Design For Manufacturing & Assembly). [Teaching Resource]

Hamdi Alif, Ahmad Radzi (2010) The Design And Development Of Inflator System Of Life Jacket For Emergency Situation In The Water. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Mohd Dom (2010) BMCS 1313: Statik. [Teaching Resource]

Hamzah, Sakidin and Mohd Ruddin, Ab Ghani and Syed Najib, Syed Salim and Norsarizan, Mat Youb (2010) Active Suspension Using Optimal Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hamzah, Mohd Dom (2010) BMCS 1313: Statik. [Teaching Resource]

Hamzah , Sakidin (2010) BEKA 1213: Matematik Kejuruteraan. [Teaching Resource]

Hamzah Asyrani, Sulaiman (2010) DACS 1212: Matematik Asas. [Teaching Resource]

Hanipah, Hussin and Rabiatul Adawiah, Ab.Aziz and Siti Balqish, Ab.Aziz (2010) Impak Teknik Seni Batik ke Atas Bahan Penghasilan Batik. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hanipah, Hussin (2010) Inovasi Jurutera dan Pemikiran Reflektif. UTeM 2010. (Submitted)

Hanipah, Hussin (2010) Tan Sri Datuk Wira Ahmad Nordin Mohd Amin Tokoh Pembangunan Sosio Ekonomi. UTeM 2010.

Hanipah , Hussin (2010) Model Jurulatih Reflektif Dalam Pembelajaran Sepanjang Hayat. In: Model Reflektif, 03/11/2010, UTeM. (Unpublished)

Hanipah , Hussin (2010) Pedagogical Content Knowledge (PCK). Documentation. UTeM 2010. (Submitted)

Hanipah , Hussin and Nor Hasniza , Ibrahim and Rabiatul Adawiah, Ab. Aziz and Siti Balqish , Ab. Aziz (2010) Inovasi Pengajaran Reflektif Bidang Sains dan Kejuruteraan. UTeM, Melaka. ISBN 9789832948797

Hanissah, Mohamad @ Sulaiman and Yosza, Dasril and Farah Shahnaz, Feroz and Norazlina, Abd Razak and Wong, Yan Chiew (2010) The Performance of Bootstrap Confidence Interval of Robust Process Capability Index in Electronics Production Quality Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Haroon, Hazura and Hanim, Abdul Razak and Mardiana, Bidin and Menon, P.S (2010) An Analysis of Silicon Waveguide Phase Modulation Efficiency based on Carrier Depletion Effect. In: International Conference on Semiconductor Electronics Proceedings (ICSE 2010), 28-30 June 2010, Melaka, Malaysia.

Haroon, Hazura and Menon, P.S and Majlis, B.Y and Hanim, Abdul Razak and Mardiana, Bidin and hasanah, lilik and B., Mulyanti and D., Mahmudin and G., Wiranto (2010) Modeling of SOI-based MRR by Coupled Mode Theory using Lateral Coupling Configuration. In: IEEE International Conference on Semiconductor Electronics, 2012, 19-21 September, 2012, Kuala Lumpur.

Hasbul Haqqi, Md Husin (2010) Prototype 2 Way Basic Communication System By Using Cooper Wire. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hashimah, Hassan (2010) Performance Study Of Voice Over Internet Protocol In Mobile IP v6. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hasnida, Abdul Wahab (2010) Balanced Scorecard And Organization Performance A Study Of Malaysian Healthcare Industry. Masters thesis, UTeM.

Haziq Lim, AM and Wan Sazli, NS and Hussin, B. and Azlianor, A. A. and Suhaizan, SM and Massila, K (2010) A Dijkstra’s Mobile Web Application Engine for Generating Integrated Light Rail Transit Route. WSEAS Transaction of Computers, 9 (1). pp. 11-20. ISSN 1109-2750

Hazli Rafis, Abdul Rahim (2010) DEKG 2243: Teknologi Elektrik. [Teaching Resource]

Hazrul Fazrizal , Hilman (2010) Intelligent SpyCam With Robotic Arm (ISRA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Helina , Lopus (2010) Kitchen Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Herawan, Safarudin Gazali (2010) BMCG 2372: Mekanik Bendalir. [Teaching Resource]

Herawan, Safarudin Gazali (2010) BMCT 2123: Termodinamik I. [Teaching Resource]

Herawan, Safarudin Gazali and M. Syamsul, Hadi and Shahrin, Omar and Nor Effyza, Roslan (2010) Low Power Split Unit Air Conditioning using Thermal Energy Storage (TES) System. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18 - 20 February 2010, Melaka, Malaysia.

Herman, N. S. and Hussin, B. (2010) Quality-based Spatial/Spectral Image Transformation. In: 2010 2nd International Conference on Signal Processing Systems (ICSPS), 5-7 July 2010 , Dalian, China.

Hidayah, Rahmalan (2010) BITP 1213: Pembangunan Sistem. [Teaching Resource]

Hidayah, Rahmalan (2010) BITP 3413: Pembangunan Sistem Pintar. [Teaching Resource]

Hidayah, Rahmalan and Nanna Suryana, Herman and Nor Azman, Abu and Aniza, Othman (2010) The Development The Integration Of Crowd's Movement Detection Into Surveillance Systems. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hilmi Safuan, Japar (2010) Aerodynamic Study Of Heavy Truck Using CFD Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho, Peng Hou (2010) Prototype Of Electronic Dartboard. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ho , Pak Yen (2010) Dynamic Website For Online News Publisher (DWONP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Hoe, Li Sim (2010) Design And Analysis Of Casting Mold Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Huzaifa, Musa (2010) Light Guided Path Tracker Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hwang, Tan King (2010) Surface Integrity Analysis In CNC Milling of 6061-T6 Aluminum Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Hyriel Anuar, Kasdirin and Muhammad Herman , Jamaluddin and Alias , Khamis and Hairol Nizam , Mohd Shah (2010) Development of Microcontroller-based Control of a Mini-Flying Robot Application. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

halawani, sami and M.A., Burhanuddin (2010) Machine Repositioning for DMG Analysis Based on the Maintenance Cost. Machine Repositioning for DMG Analysis Based on the Maintenance Cost, 6 (1). pp. 267-272. ISSN 978-0-7695-4262-1

hambali, A and Farid, Z.A and Najib, M (2010) Development of a new pump through modifying a conventional automotive spark plug. Journal of Scientific & Industrial Research (JSIR), 69. pp. 365-367. ISSN 0975-1084 (Online); 0022-4456 (Print)

I

Ibrahim, Ahmad (2010) BITM 3223: Teknologi Realiti Maya. [Teaching Resource]

Ibrahim, Mohd Sufiz and Ahmad, Mohd Riduan and Gannapathy, Vigneswara Rao (2010) Adaptive Concurrent Medium Access Control for Wireless Mesh Network. In: International Symposium on Broadband Communication (ISBC), 11-14 July 2010, Melaka, Malaysia.

Ibrahim, Mohd Sufiz and Ahmad, Mohd Riduan and Gannapathy, Vigneswara Rao (2010) Adaptive Concurrent Transmission Protocol for Wireless Mesh Network. In: IMMAC, 11-12 June 2010, Jakarta, Indonesia.

Ibrahim, Zulkifilie (2010) BEKE 3753: Peranti & Penerus Elektronik Kuasa. [Teaching Resource]

Ibrahim, Zulkifilie (2010) BEKE 4783: Elektronik Kuasa Dan Pemacu. [Teaching Resource]

Idris, Fakrulradzi and Hashim, Norlezah (2010) Voice and Video Transmission with Mobile IPv6. In: 4th International Symposium on Broadband Communications (ISBC2010) , 11-15 July 2010, Melaka.

Ilyana , Mohamad Tajuddin (2010) Magnetic Levitation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Mohd. Nor, Husain (2010) Design And Development Of Low Cost Anechoic Chamber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran, Mohd Ibrahim and Noor Azwan, Shairi (2010) Direct Conversion RF Front End Receiver for 5.8 GHZ WLAN Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran Ariff , Mohamed (2010) GL System (Garbage Listing System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Imran Syakir, Mohamad (2010) BACS 1232: Kimia. [Teaching Resource]

Imran Syakir, Mohamad (2010) DMCU 1233: Kimia. [Teaching Resource]

Intan Azmira, Abdul Razak and Mohd Shahrieel, Mohd Aras and Alias, Khamis and Aziah , Khamis and Elia Erwani, Hassan (2010) Short Term Load Forecasting With Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Intan Azmira , Wan Abdul Razak (2010) BEKP 4673: Perlindungan Sistem Kuasa. [Teaching Resource]

Irda, Roslan (2010) BITS 1213: Sistem Pengoperasian. [Teaching Resource]

Irda, Roslan (2010) DITS 2213: Sistem Pengoperasian. [Teaching Resource]

Irda, Roslan and Mohd Faizal, Abdollah and Shahrin, Sahib and Zurina, Sa'aya (2010) The Development of Resource Aware Middleware for Ad Hoc Wireless Network in a Collaborative Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irda, Roslan and Robiah , Yusof and Mohd Zaki, Mas'ud and Siti Rahayu, Selamat and Mohd Faizal, Abdollah (2010) Trace Map Model for Forensic Investigation Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Irma Wani , Jamaludin (2010) BACS 1223: Persamaan Pembezaan. [Teaching Resource]

Irma Wani , Jamaludin (2010) BEKA 2333/BACS 1223: Persamaan Pembezaan. [Teaching Resource]

Isa, Halim (2010) QUEST Simulation Analysis for Facility Layout Redesign of Handwork Area. In: World Engineering Congress 2010, 02 - 05 August 2010, Kuching, Sarawak..

Isa, Halim (2010) Analysis of Muscle Fatigue During Prolonged Standing Jobs in Manufacturing Industry Utilizing Ergonomics Assessment. In: World Engineering Congress, 2 - 5 December 2010, Kuching, Sarawak.

Isa, Halim (2010) Assimilating Quality Function Deployment (QFD) with QUEST® Analysis for Facility Layout Redesign of Handwork Section. In: 2010 International Conference on Science and Social Research (CSSR 2010), 05 - 07 December 2010, Kuala Lumpur.

Isa, Halim (2010) Development of a Questionnaire for Prolonged Standing Jobs at Manufacturing Industry. In: Third International Conference on Applied Human Factors and Ergonomics (AHFE), 17-20 July 2010, Miami, Florida, USA..

Isa, Halim (2010) Modeling of an Integrated Workstation Environment for Occupational Safety and Health Application. In: Third International Conference on Applied Human Factors and Ergonomics 2010 (AHFE 2010), 17-20 July 2010, Miami, Florida, USA..

Isa , Halim (2010) Analysis of Muscle Fatigue associated with Prolonged Standing Tasks in Manufacturing Industry. In: 2010 International Conference on Science and Social Research (CSSR 2010), 05 - 07 December 2010, Kuala Lumpur.

Ishak, N. H. and Bakar, N. (2010) Preliminary analysis of “The Effectiveness of using Virtual Reality approach in Electromagnetic Theory Subject Courseware” in MTUN. In: Kolokium Kebangsaan Pasca Siswazah Sains & Matematik 2010, 22 December 2010, UPSI, Perak. (Submitted)

Ismadi , Bugis (2010) BEKE 4683: Elektronik Kuasa Dalam Industri. [Teaching Resource]

Ismadi , Bugis (2010) BEKE 4773: Penukar Elektronik Kuasa. [Teaching Resource]

Ismail, H. Muh Yusuf (2010) Genetic Algorithms In Optimizing Membership Function For Fuzzy Logic Controller. Masters thesis, UTeM.

Ismail, Mohd Khairuddin (2010) Gyroscope Implementation On Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ismail , Kamariah and Abdul Majid, Izaidin and Cooper, Sarah and Wan Omar, Wan Zaidi (2010) HOW THE DECISION MAKING IN COMMERCIALISATION OF UNIVERSITY TECHNOLOGIES HAVE BEEN MADE: A CASE STUDY. In: International Conference of Education, Research and Innovation (ICERI), 15 November 2010, Madrid Spain.

Iylia Shaleen , Ismail (2010) Short Messaging System (SMS) Reminder For Car Alarm Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izaidin, Abdul Majid and Mohd Taib, Dora and Muliati, Sidek and Mohd Fauzi, Kamarudin (2010) Kajian Keperluan Bagi Meningkatkan Penguasaan Berbahasa Inggeris Di Kalangan Staf Akademik UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Izzat Safuan, Arif (2010) Effect Of Variation Of Construction Materials On Thermal Comfort Using CFD Simulation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

J

Ja'alam, Mohd Azhar (2010) Kajian Sistem Tadahan Hujan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaafar , Diyana Zahirah (2010) Multi-Purpose Hybrid Power Supply. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jaganathan, M. and Krishnan, V. R. and Zakaria, Mohd Sharim and Ahmad, Mohd Riduan (2010) A Study of Topology Characteristics on the Real Deployment of Wireless Sensor Networks. In: International Symposium on Broadband Communication (ISBC), 11-14 July 2010, Melaka, Malaysia.

Jamadeel Izwan , Ibrahim (2010) An Application Of 3D Modeling And Simulation Analysis In The Development Of Consumer Product Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Abdullah (2010) Skuter Elektrik Boleh Lipat Menggunakan Hab Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamaludin, Mohamad Faizal (2010) Investigation On Feasible Materials And Methods For Inducing Natural Dehumidification In Tropical Living Room. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamieshah , Jamil (2010) Design And Analysis KR-150 Go-Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jamri , Mohd Saifuzam (2010) Modeling and Control of a Photovoltaic Energy System Using the State-Space Averaging Technique. American Journal of Applied Sciences. pp. 682-691. ISSN 1546-9239

Jasmi, Ahmad (2010) MTKM5053: Marketing Management And Technology. [Teaching Resource]

Jaya Kumar, Y. and Hamid, E. (2010) "Admin Tech" Berkuasa, Idawati menyerlah dalam kejohanan badminton FTMK. FTMK.

Jeefferie, Abdul Razak (2010) Development and mechanical testing of wood composite (WPC) made recycled polymer and recycled wood flour. Other thesis, UTeM.

Jeefferie, Abd Razak (2010) DMFD 2843: Termodinamik (Thermodynamics). [Teaching Resource]

Jeefferie , Abdul Razak (2010) Potential application of biodegradable TS/SCFC green composite for disposable packaging food container. Other thesis, UTeM.

Jeevintharan, Sivasankaran (2010) Design Of Experiment (DOE) Based Response Prediction In Machining. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Jidin, Auzani (2010) Torque ripple minimization in DTC induction motor drive using constant frequency torque controller. In: IEEE- International Conference on Electrical Machines and Systems (ICEMS), 2010, 10-13 Oct. 2010, Incheon, South of Korea.

Jidin, Auzani and Sutikno, Tole and Nik Idris , Nik Rumzi and Jidin, Aiman Zakwan and Mohamed Yatim, Abdul Halim (2010) A Novel Dynamic Overmodulation Strategy of Direct Torque Control. TELKOMNIKA: Indonesian Journal of Electrical Engineering, 8 (3). 275 -284. ISSN 1693-6930

Jidin , Auzani (2010) Design and development of a small scale system for harvesting the lightning stroke using the impulse voltage generator at HV lab, UTeM. In: The 2nd International Conference on Computer and Automation Engineering (ICCAE), 2010, 26-28 Feb. 2010, Singapore.

Jidin , Auzani (2010) Simple Dynamic Overmodulation Strategy for Fast Torque Control in DTC of Induction Machines with Constant Switching Frequency Controller. In: IEEE Industry Applications Society Annual Meeting (IAS), 2010, 3-7 Oct. 2010, Houston, TX, United States of America.

Jidin , Auzani (2010) A new source of renewable energy from lightning stroke: A small scale system. In: IEEE- International Power Electronics Conference (IPEC), 2010, 21-24 June 2010, Sapporo.

Jidin , Auzani (2010) A simple strategy to solve complicated square root problem in DTC for FPGA implementation. In: IEEE Symposium on Industrial Electronics & Applications (ISIEA), 2010 , 3-5 Oct. 2010, Penang.

Jitvinder, Dev Singh (2010) Applying Speech Recognition System In Learning Basic Arabic Language. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Johny, Purnomo (2010) DMFG 3813: Sistem Pembuatan (Manufacturing System). [Teaching Resource]

Joseph, Tiong King Ing (2010) Experimental Investigation Of Bamboo-Filled Aluminium Tube Subjected To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Joseph, Sahaya Anand (2010) BMFB 4273: Semikonduktor (Semiconductor). [Teaching Resource]

Juhaini, Jabar and Claudine, Soosay (2010) Evaluating technology transfer and new product development in Malaysian manufacturers. In: Proceeding of the 24th Australia and New Zealand Academy of Management Conference: Managing Unknowable Future, 8 Dec - 10 Dec, Adelaide, Australia.

Juhaini, Jabar and Claudine, Soosay (2010) An assessment of technology transfer in Malaysian manufacturers and the impact on performance and innovativeness. In: Proceedings of the 5th IEEE International Conference on Management of Innovation and Technology, 2 June - 5 June, Singapore.

Juhaini, Jabar and Soosay, Claudine (2010) Evaluating innovation adoption attribute in technology transfer. In: Proceedings of the 8th ANZAM Operations, Supply Chain and Services Management Symposium - Managing in Challenging Time, 6 June - 8 June , Sydney, Australia.

Juhaini, Jabar and Claudine, Soosay and Ricardo, Santa (2010) Organisational learning as an antecedent of technology transfer and new product development :A study of manufacturing firms in Malaysia. Journal of Manufacturing Technology Management. pp. 25-45. ISSN 1741-038X

Juhari, Ab. Razak (2010) BMCT 3133: Termodinamik II. [Teaching Resource]

Juleza , Zakaria (2010) Oil Palm Empty Fruit Bunch (EFB) Fiber Brick Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juliana, Jaafar (2010) BITP 3213: Ujian Dan Jaminan Kualiti. [Teaching Resource]

Junid , Ramli and Abd Salam, Hadi and ABD RAZAK , JEEFFERIE and Mahat, Mohd Muzamir (2010) A Preliminary Study on the Effects of Photoinitiator and UV Curing Exposure Time to the Mechanical and Physical Properties of the Epoxy and Vynil Ester Fiber Glass Laminated Composites. International Journal of Engineering and Technology (IJET), 10 (06). pp. 14-20. ISSN 0975-4024

Jurina, Buniran (2010) Automatic Juice Mixer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juwita, Mohd Sultan and Azahari, Salleh and Abd Shukur, Ja'afar (2010) Macrodiversity for Combating Shadowing Forward and Received Link. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Juwita, Mohd Sultan (2010) DENE 1323: Prinsip Elektronik. [Teaching Resource]

K

Kabilah Amin, Yahya (2010) Design Of Multiband Electromagnetic Band Gap (EBG) Structure. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kalthom, Husain (2010) Women's Internet Usage In University Setting In Malaysia And The United Kingdom: A Comparative Case Study. Masters thesis, University of Brighton.

Kalthom, Hussain and aida nasirah , abdullah and Hanipah, Hussin and hazmilah, hasan (2010) UTeM's Undergraduate Experience on Facebook: Preliminary Findings. In: Proceedings of International Conference on Communication Dynamics 2010, 5-6 April 2010, Universiti Teknikal Malaysia Melaka.

Kamal , Muhammad Raini (2010) Study On Waste Wood As An Alternative Conservation Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kamarudin, Muhammad Nizam and Jamri , Mohd Saifuzam (2010) Power Stabilization Of A Stand-Alone Solar System Using Perturb and Observe MPPT Algorithm. In: Global Conference on Power Control and Optimization, 02-04 Dec 2010, Kuching, Sarawak.

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati (2010) Estimator and Controller Design for a Didactic Liquid Level system by System Identification Approach. Proceedings of MUCET2010. pp. 1-4. ISSN 978-983-2948-77-3

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati (2010) Estimator and Controller Design for a Didactic Liquid Level system by System Identification Approach. In: Malaysian Technical Universities Conference on Engi neering and Technology, 28-29 June 2010, Melaka.

Kamat, Seri Rahayu and Yoxall, Alaster and Carre, Matt and Rowson , Jenifer (2010) HUMAN PERCEPTION OF HAND PAIN FOR ACTIVITIES COMMON IN DAILY LIFE. In: International Conferance of Ksnsei Engineering and Emotion Reserach (KEER) 2010 , 2 April 2010, London UK.

Kamat, Seri Rahayu and Yoxall, Alaster (2010) A Kinematics Study Part1: Hand and Finger Movements During Typical Cleaning Activities. In: VIII International Conference on Occupational Risk Prevention May 5th to 7th. Valencia, Spain, 5th to 7yh May 2010, Valencia Spain .

Kasdirin, Hyreil Anuar and Amrullah , Isma (2010) BEKC 2433: Isyarat Dan Sistem. [Teaching Resource]

Kasdirin, Hyreil Anuar and Kyairul Azmi , Baharin (2010) BEKP 3553: Teori Elektromagnet. [Teaching Resource]

Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2010) TOOL LIFE INVESTIGATION IN DRY TURNING OF INCONEL 718 WITH PVD TiAlN-COATED WC INSERT. In: Conference on Engineering and Technology Education, 2nd – 5th August 2010, Kuching, Sarawak.

Kasturi, Kanchymalay (2010) BITP 3113: Pengaturcaraan Berorientasikan Objek. [Teaching Resource]

Kesavan, Asokkumaran (2010) Radio Frequency Identification (RFID) for Warehouse Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairol Anuar, Rakiman (2010) BMFA 2453: Pengenalan Kepada Robot (Introduction To Robotics). [Teaching Resource]

Khairol Anuar, Rakiman (2010) DMFD 3413: Kuasa Bendalir (Fluid Power). [Teaching Resource]

Khairuddin, Omar and Mohd Sanusi, Azmi (2010) Batu Bersurat Terenganu: Perspektif Geometri Segitiga. In: Seminar Batu Bersurat, 28-29 March 2010, Kuala Terengganu, Malaysia.

Khairuddin, Omar and Mohd Sanusi, Azmi (2010) FRAMEWORK OF JAWI DIGITAL PALEOGRAPHY: A PRELIMINARY WORK. In: 2nd International Conference on Mathematical Sciences 2010, 30 Nov-3 Dec 2010, Kuala Lumpur, Malaysia.

Khairuddin, Osman (2010) BENE 4113: Robotik Industri. [Teaching Resource]

Khairuddin , Omar and Mohd Sanusi , Azmi (2010) Kerangka Paleografi Jawi Digital : Satu Cadangan Awal. In: Seminar Teknologi Maklumat, 27 October 2010, Melaka, Malaysia.

Khairul Aidil, Nordin (2010) Design And Analysis Of Optical Mouse Using Boothroyd Dewhurst DFMA Methodology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Anuar, Mohd Padzil (2010) Short Term Load Forecasting With Perceptron Artificial Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairul Azha, A. Aziz (2010) DENE 3153: Prinsip Kawalan. [Teaching Resource]

Khairul Fadzli, Samad (2010) DMFD 2823: Statik & Dinamik (Statics & Dynamics). [Teaching Resource]

Khairul Hadi, Khalid (2010) Analisis Dan Penilaian Geganti Arus Lebih Melawan Geganti Jarak Pada Talian Penghantaran Menggunakan Perisian Cape. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khairul Ihsan , Md Shaari (2010) Scaled Model Of A Ware Energy Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulanuar, Zainuddin (2010) Programmable Arm Robot Manipulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khairulnisak , Mohamad Zaini (2010) Port Log Entry Management System (PLEMS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khairurazikin , Mukhtar (2010) Smart Hybrid System For Outdoor And Indoor Application (Solar Tracking System). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khalil Azha , Mohd Annuar (2010) DEKC 2523: Litar Elektrik II. [Teaching Resource]

Khalil Azha , Mohd Annuar (2010) DEKP 1213: Litar Elektrik 1. [Teaching Resource]

Khamis, Aziah (2010) BEKP 4773: Analisis Sistem Kuasa. [Teaching Resource]

Khamis, Aziah and Kamarudin, Muhammad Nizam (2010) Identification and Simulation of Dc-Dc Boost Converter for Charging Up PV Voltage for 24-Volts Battery. In: The Asia-Pacific Symposium on Applied Electromagnetics and Mechanics (APSAEM2010), 28-30 July 2010, Kuala Lumpur, Malaysia.

Khisbullah, Hudha (2010) BMCA 4663: Autotronik. [Teaching Resource]

Khisbullah, Hudha (2010) BMCV 4633: Suspensi Dan Casis Kenderaan. [Teaching Resource]

Khoo , Shi Jin (2010) Online Learning Aid System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Khor , Han Wei (2010) Design And Analysis Of Offshore Wind Power Platform. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Khyrina Airin Fariza, Abu Samah (2010) The Development Of An Intelligent Fire Alarm Detection System Using Fuzzy Logic: A Case Study. Masters thesis, UTeM.

Koh, Wee Kian (2010) Fault Condition Monitoring By Using LabVIEW. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koi, Ka Siang (2010) Filesharing For Office Social Network. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Kok, Swee Leong (2010) Design, Fabrication And Characterisation Of Free-Standing Thick-Film Piezoelectric Cantilevers For Energy Harvesting. PhD thesis, University of Southampton.

Kok, Swee Leong (2010) MENC5213: Computer Architecture. [Teaching Resource]

Kong , Khee Kien (2010) Implementation Of New Three Step Search Algorithm For Motion Estimation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Koukharenko, Elena and Jekaterina , Kuleshova and Fowler, Marcel and Kok, Swee Leong and Tudor, Michael J. and Beeby, Stephen P. and Nandhakumar, Iris and White, Neil (2010) Ion Track Nanolithography Using Thick Cross-Linked Poly(methyl methacrylate) 950 Photoresist. Jpn. J. Appl. Phys., 49. ISSN Online: 1347-4065/ Print: 0021-4922

Kriteevasan , Aramugam (2010) Hardware For Optimization Of Hardware Platform For Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kumaresan, Magaswaran (2010) A Study Of Windshield Automotive Wiper Noise And Vibration Using Finite Element (FE) Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan, Wai Loon (2010) Mechanical And Thermal Properties Of Intermetallic Ni3Al For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Kwan , Swee Yee (2010) Star LRT Guideline Using Speech Recognition. Project Report. UTeM, Melaka,Malaysia. (Submitted)

kamalrudin, massila and hosking, John and Grundy, John (2010) MaramaAI: Automated and Visual Approach for Inconsistency Checking of Requirements. In: 2010 18th IEEE International Requirements Engineering Conference, Sept. 27 2010-Oct. 1 2010 , Sydney,Australia.

L

Lai , Kar Yee (2010) FTMK Exam Questions Management System Via Sms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Kok Wei (2010) Computer Simulation On Circular Ring Subject To Lateral Compression, Quasi-Static Lateral. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau, Siew Joo (2010) Asset Tracking System (ATS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lau , Siew Joo (2010) Asset Tracking System (ATS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Law , Yi-Fang (2010) Development Of E-Tuition Prototype System For Pusat Bimbingan Seri Usaha. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ee Yoong (2010) Little Bell Kindergarten System (LBKS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Pei Pei (2010) Augmented UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Ho Chung (2010) Upgrade FMS200 : Shaft Supply Module Though Human Machine Interface. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Kam Wah (2010) Speech Recognition Over Electrical/Electronic Appliances. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee, Liu Hui (2010) Parking System Using Labview With SMS Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lee, Weng Sum (2010) Quality Optimization in The Manufacturing Industry: An Application Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Hau Hwa (2010) Sri Maju Online Bus Ticket System (SMOBTS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lee , Huey Yee (2010) Optimal Control Of Autonomous Underwater Vehicle (AUV) Using Genetic Algorithms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Leong, Soon May (2010) Suria Kindergarten Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Liew, Toong Kean (2010) Optimization Of Machining Parameters In CNC Milling For Nylon 6. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew, Jia Qi (2010) Home Appliances Control Using GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liew , Yew Hwa (2010) Cemetery Sales And Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim, A. M. Haziq and Sazli, N. S. Wan and Hussin, B. and Azlianor, A. A. and Suhaizan, S. M. and Massila, K. (2010) A Dijkstra's mobile web application engine for generating integrated light rail transit route. W. Trans. on Comp., 9 (1). pp. 11-20.

Lim, Chee How (2010) Car Steering Control System For Disability Person. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kok Chin (2010) Mechanical And Thermal Properties Of Intermetallic Ni5Al3 For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Cze Siang (2010) Multi Size Shape Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim, Kim Chuan (2010) BENC 4163: Rekabentuk Perisian Terbenam. [Teaching Resource]

Lim, Ming Kerk (2010) Designing And Fabricating The Guard Rail System For The Scaffold. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Chin Ling (2010) Oldies Matching Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Lik Ching (2010) Home Tiles Planning And Recommendation System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Lim , Swee Ann (2010) Automatic Reset Residual Current Circuit Breaker With Identification Of Fault Condition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Tat (2010) Dot Matrix LED Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Teck and Sulaiman , Marizan and Mohd Shah, Hairol Nizam (2010) Shape-Based Matching Vision System in Flexible Manufacturing System. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Lim , Fung Chien (2010) Project Management : A Simulation Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim , Wee Teck and Sulaiman , Marizan and Mohd Shah, Hairol Nizam and OMAR, ROSLI (2010) Implementation of Shape – Based Matching Vision System in Flexible Manufacturing System. Journal of Engineering Science and Technology Review , 3 (1) (1). pp. 128-135. ISSN 1791-2377

Lim , Yuen Hee (2010) Power Outage Alert System (POAS) Via Sms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lim Wee, Teck and Sulaiman , Marizan and Mohd Shah, Hairol Nizam and Omar , Rosli (2010) Implementation of Shape – Based Matching Vision System in Flexible Manufacturing System. Journal of Engineering Science and Technology Review , 3 (1). pp. 128-135. ISSN 1791-2377

Lina , Feng (2010) Inverted Pendulum Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liong, Shun Hsiang (2010) Analysis Of Springback Problem On Aluminum Sheet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liong , Kin Fei (2010) Intelligence Multipurpose Vacuum. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Liyana Maisarah , Abdul Aziz (2010) Educational Game: Star Hunt! Project Report. UTeM, Melaka, Malaysia. (Submitted)

Logeswaran, Kanasin (2010) Design Optimization Of Third Brake Light And Signal System On Motorcycle Helmet. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Loh, Ser Lee and Salleh, Shaharuddin and Sarmin, Nor Haniza (2010) Spanning Tree Transformation of Connected Graph into Single-Row Network. In: International Conference on Computational and Mathematical Engineering, 24 - 25 February 2010, Bayview Hotel Georgetown, Penang, Malaysia.

Loh , Wai Hoong (2010) Intelligent Tool To Select Disered Products Using Analytical Hierarchy Process Model. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Loke, Weng Hong (2010) Vision-Based Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah and Mohd Hisham, Nordin and Shariman, Abdullah and Lee, Wai Kiong (2010) PC Based Control of XYZ Motion for Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Lokman, Abdullah (2010) BMFA 2433: Sistem Mekatronik (Mechatronics System). [Teaching Resource]

Lokman, Abdullah (2010) BMFA 3473: Penderia & Instrumentasi (Sensor & Instrumentation). [Teaching Resource]

Loo, Kien Lim (2010) Fetal Weight Prediction Using Neural Ensemble Based C4.5 For Low Birth Weight Fetuses. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Low, Ru Shi (2010) 3D Animation - Bulat And Panjang. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Say Soon (2010) Least-Squares Parameter Estimation And Its Application In Electronic Products. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low, Soo Har (2010) R66 Bus Superstructure Concept Design Development. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Low , Wen Jie (2010) Study Of Influence Of Retrogression And reaging (RRA) Treatments On Microstructure Evolution And Mechanical Properties Of Aluminium Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Luei, Hong Keat (2010) Measurement Of Surface Roughness Using Image Processing Technique. Masters thesis, UTeM.

Luqman Hakim, Kasmon (2010) Development Of Navigation System For Autonomous Mobile Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

M

M. K. , Abd Ghani (2010) BITP 3223: Pengurusan Projek Perisian. [Teaching Resource]

M. R., Sapiee and Noordin, A. (2010) Adaptive Gain Controller Using Model Reference Adaptive Control Method Stability Approach For Road Vehicle Following System. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 2 (1). pp. 55-70. ISSN 2180-1053

M. R., Sapiee and Noordin, Aminurrashid and Basar, Mohd Farriz and Rasin, Zulhani and Talib, Md Hairul Nizam (2010) Road Vehicle Following System With Adaptive Controller Gain Using Model Reference Adaptive Control Method Lyapunov Approaches. In: The 2nd International Conference on Engineering and ICT (iCEi2010), 18 -20th February 2010,, Melaka.

M. R., Sapiee and Sudin, Shahdan (2010) Road Vehicle Following System With Adaptive Controller Gain Using Model Reference Adaptive Control Method. International Journal of Simulation Systems, Science & Technology, 11 (5). pp. 24-32. ISSN 1473-804x

M. S., Kamil and A. M., Kamely and H. Y., Saifudin and A. P., Puvanasvaran and M.M.P., Dan (2010) THE SOURCE OF UNCERTAINTY IN 3D LASER SCANNER. Journal of Advanced Manufacturing and Technology, 4 (1). pp. 87-96. ISSN 1985-3157

M.A., Burhanuddin and halawani, sami and A.R., Ahmad and Tahir, Zulkifli (2010) Contractor selection for maintenance in Small and Medium Industries using Analytical Hierarchy Process. IEEE International Conference on Computer Science and Information Technology, 6 (1). pp. 368-372. ISSN 978-1-4244-5540-9/10

Madiha, Zahari (2010) DEKE 2243: Elektronik. [Teaching Resource]

Madiha , Zahari (2010) DEKE 2243: Elektronik. [Teaching Resource]

Madiha , Zahari (2010) DEKP 2633: Litar Elektrik 1. [Teaching Resource]

Mageswaran, R. Jaganathan (2010) Centralized Wireless Sensor Network Deployment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahadir , Mohd Tazrin (2010) Solar Powered Water Pump. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahanum, Mohd Zamberi (2010) BMCF 3233: Mekanik Bendalir II. [Teaching Resource]

Mahirah, Mohamad (2010) Design And Development Of GPS Navigation Guideline System For Autonomous Underwater Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mahzan, Johar (2010) Effect Of Solution Annealing On Microstructure, Corrosion And Mechanical Property Of Sensitized AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maizatul Alice, Meor Said (2010) DENE 2333: Elektronik. [Teaching Resource]

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mak, Kien Keng (2010) Design And Analysis Of Cast Metal Matrix Using CAD Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mamat, Rizalman and Abdullah, Nik Rosli and Tamaldin, Noreffendy (2010) Emissions of a Single Cylinder Diesel Engine Operating with Ethanol. In: ENGINEERING MECHANICS & TRANSPORT 2010 (EMT2010), 25-27 Nov 2010, LVIV, ukraine.

Maniza , Mukim (2010) Improvised Braille Character To Roman Text Converter Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mardiana, Bidin and Hanim, Abdul Razak and Haroon, Hazura and Sahbudin, Saari and Menon, P.S and Abdullah, H. (2010) Electro-Optical Modulator Performance in SOl. In: International Conference on Enabling Science and Nanotechnology (ESciNano), 1-3 Disember, 2010, KLCC.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Menon, P.S and Abdullah, H. (2010) Operation mode of phase modulation based on carrier dispersion effect in p-i-n diode of silicon rib waveguide. In: IEEE International Conference on Semiconductor Electronics (ICSE 2010), 28-30 Jun 2010, Melaka.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Abdullah, H. (2010) Phase modulator based on Silicon-on-Insulator (SOI) rib waveguide. In: International Conference on Photonics (ICP) 2010 , 5-7 Julai, 2010, Pulau Langkawi.

Mardiana, Bidin and Haroon, Hazura and Hanim, Abdul Razak and Sahbudin, Saari and Abdullah, H. (2010) Various Doping Concentration Effect on Silicon-on-Insulator (SOI) Phase Modulator. In: International Conference on Photonics (ICP 2010), 5-7 Julai 2010, Pulau Langkawi.

Mardiana, Bidin and Hazura, Haroon and Hanim, Abdul Razak and Sahbudin, Saari and Huda, Abdullah (2010) Various doping concentration effect on silicon on insulator (SOI) phase modulator. In: 2010 International Conference on Photonics (ICP), 5-7 July 2010, Langkawi, Kedah. (Submitted)

Marizan, Sulaiman and Azhar, Ahmad and Nur Khairul Bariyah, Mahyudin (2010) The Effect Of Multiple Lightning Impulse On The Electrical Characteristics Of Mov. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marizan, Sulaiman and Hairol Nizam, Mohd Shah and Lim, Wee Teck (2010) Sequencing and control algorithm of pattern recognition for industrial processes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marizan, Sulaiman and Hairol Nizam, Mohd Shah and Lim, Wee Teck (2010) Vision Based Pattern Recognition For Industrial Inspection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marliana, Md Taib (2010) Measurement Error And Uncertainty Analysis By Excel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Marliza, Ramly (2010) BITS 3343: Gentian Optik. [Teaching Resource]

Marliza, Ramly (2010) DITS 1133: Organisasi Dan Senibina Komputer. [Teaching Resource]

Marliza, Ramly and Robiah, Yusof and Siti Rahayu, Selamat and Mohd Zaki, Mas'ud and Mohd Faizal, Abdollah (2010) Malware Intrusion Detection Through Profiling of Intrusion Detection Techniques. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Maryahafida, Mamat (2010) Solar Light Positioniong Detector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mas'ud, M. Z. and Erman, Hamid and Nor Azman, Mat Ariff and Abdollah, M. F. and Selamat, S. R. (2010) Virtualization Technology in Teaching Information Technology Security. In: The 3rd Regional Conference on Engineering Education (RCEE 2010) and Research in Higher Education 2010 , 7 - 9 June 2010, Kuching Sarawak.

Masjuri, Musa @ Othman (2010) DMFG 1323: Proses Pembuatan. [Teaching Resource]

Maslan , Zainon (2010) BEKC 4883: Sistem Pembuatan Termaju. [Teaching Resource]

Maslita , Abd Aziz (2010) DITP 1123: Pengaturcaraan II. [Teaching Resource]

Masrizal, Bakri (2010) Leave Management System via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mastura, Mohamad Taha (2010) DACS 1222: Kalkulus. [Teaching Resource]

Mastura , Mohammad Taha (2010) DACS 1222: Kalkulus. [Teaching Resource]

Mastura , Mohammad Taha (2010) DACS 1222: Kalkulus. [Teaching Resource]

Mat Nuri @ Md Din, Nur Rashid and Mansor, Dr Shuhaimi and Abd Rahman, Muhammad Riza (2010) The Effect of Flow Characteristic on Generic Shape of an Automotive Side Mirror. In: 3rd International Graduate Conference on Engineering, Science and Humanity , 2 - 4 November 2010, Universiti Teknologi Malaysia.

Mat Yamin, Ahmad Kamal and Benjamin, Stephen and Roberts , Carol A and Pierson, Steve (2010) Modelling an Axisymmetric Perforated Brick Catalyst. In: Star European Conference 2010, 22 - 23 March 2010, London.

Mazlan, Esro and Abdul Hamid, Hamidon and Badrul Hisham, Ahmad and Norizan, Mohamad (2010) BENE 2153: Elektronik Analog. [Teaching Resource]

Mazlan, Esro and Yap, David Fook Wen and Najmiah Radiah, Mohamad (2010) BENP 2183: Instrumentasi Elektronik. [Teaching Resource]

Mazleenda , Mazni (2010) Development Of Hydrophone System For Autonomous Underwater Vehicle (AUV)Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mazree , Ibrahim (2010) BEKC 2433: Mikropemproses. [Teaching Resource]

Mazree , Ibrahim (2010) BEKM 3353: Sistem Instrumentasi. [Teaching Resource]

Md Fua’ad, Jamian (2010) Merekabentuk Dan Menghasilkan Blok Uji Ujian Tanpa Musnah (NDT) Untuk Aplikasi Ujian Ultrasonik (UT). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Ghazaly, Mariam (2010) Control Performances of a Fine Motion Stage using a Multilayer Electrostatic Actuator without Precise Balls for Lubrication. In: 14th International Conference on Mechatronics Technology (ICMT 2010), 24 - 26 November 2010, Osaka, Japan.

Md Ghazaly, Mariam (2010) Open-loop Characteristics of a Multilayer Electrostatic Actuator for a Fine Motion Stage. In: 14th International Conference on Mechatronics Technology (ICMT 2010), 24 - 26 November 2010, Osaka, Japan.

Md Hairul Nizam , Talib (2010) BEKE 1123: Peranti Elektronik. [Teaching Resource]

Md Hairul Nizam , Talib and Fairul Azhar , Abdul Shukor and Ab Aziz , Nur Hakimah (2010) BEKE 1323: Analog Elektronik. [Teaching Resource]

Md Nor Hayati, Tahir and Mohd Fazli, Mohd Sam (2010) Innovation Activities in The Malaysia Public sector: Factors Promoting The Byproduct of ICT Usage. International Journal of Research and Reviews in applied Sciences, Vol. 2 (No. 3). pp. 296-305. ISSN ISSN: 2076-734X

Md Radzai, Zaid (2010) BMCG 2343: Pengantar Kejuruteraan Mekanikal. [Teaching Resource]

Md Razali, Ayob (2010) BMCT 4153: Sistem Penyejukan & Penyaman Udara. [Teaching Resource]

Md Rozali, Sahazati and Rahmat, Mohd Fua'ad and Abdul Wahab, Norhaliza and Ghazali, Rozaimi and Has, Zulfatman (2010) PID Controller Design for an Industrial Hydraulic Actuator with Servo System. Proceedings of 2010 IEEE Student Conference on Research and Development (SCOReD 2010),. pp. 218-223. ISSN 978-1-4244-8648-9/10

Md Safirul Shafik, Ramlee (2010) Pocket Tacho Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md Sani, Zamani (2010) BEKC 3543: Mikropemproses. [Teaching Resource]

Md Sani, Zamani (2010) BEKM 3453: Teknologi Mikropengawal. [Teaching Resource]

Md. Amta Ezra, Ahmad (2010) The Feasibility Study And Design Improvement Of Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md. Fahmi, Abd. Samad @ Mahmood (2010) BMCM 2733: Getaran Mekanikal. [Teaching Resource]

Md. Nor Hayati, Tahir and Mohd Fazli, Mohd Sam (2010) Diffusion of Telecommunication in Malaysia Consumer Decision Making on Technology Adoption. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Md.Nor Hayati , Tahir and Mohd. Fazli, Mohd Sam (2010) Innovation Activities in The Malaysian Public Sector: Factors Promoting the Byproduct of ICT Usage. International Journal of Research and Reviews in applied Sciences, Volume (Number). pp. 296-305. ISSN ISSN: 2076-734X

Meor Ahmad Salahuddin , Azmi (2010) Home Security Using SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Meor Mohd Azwan , Sahran (2010) Application Of Value Stream Mapping (VSM) In Manufacturing Industry (Case Study : Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Merpati Mitan, Nona Mery (2010) DACS 1232: Kimia. [Teaching Resource]

Minhat, Mohamad and Xu, Xun (2010) ‘STEPNCFBUoA’ - An Advanced Manufacturing Control System based on STEP-NC and FB enabled technology. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Mior ShahrIl, Sulaiman (2010) Membangunkan Dandang Tiub Air Menggunakan Bahan Bakar Pepejal Buangan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Misron, Norhisam and Mat Saad, Ezril Hashim and Raja Othman, Raja Nor Firdaus Kashfi and Abdul Shukor , Fairul Azhar and Wakiwaka, Hiroyuki and Nirei, Masami (2010) Positioning system for sensor less linear DC motor. In: Asia-Pacific Symposium on Applied Electromagnetics and Mechanics 2010, 28 – 30 July 2010, Kuala Lumpur, Malaysia.

Moamad Izzudin, Abdul Hamit (2010) Mechanical And Microstructure Characterization Of Oil Treated Aluminium Alloy 7075. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohamad, Ismail (2010) Ergonomic Assessment In Manufacturing Industry (Jati Beringin Sdn. Bhd.). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad, Norhidayah and Yahya, Salleh (2010) Exploring Succession Planning within Small Family Owned Businesses. Japanese Journal of Administrative Science, 23 (3). p. 177. ISSN 0914-5206

Mohamad, Noraiham and Muchtar, Andanastuti and Ghazali, Mariyam Jameelah and Hj Mohd, Dahlan and Azhari, Che Husna (2010) Epoxidized natural rubber–alumina nanoparticle composites: Optimization of mixer parameters via response surface methodology. Journal of Applied Polymer Science, 115 (1). pp. 183-189. ISSN 1097-4628

Mohamad Aminur , Hasan (2010) Nilam Program System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohamad Eezafri, Mohamad Fazee (2010) Design Optimization Using Finite Element Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faidzal, Razali (2010) Productivity Improvement The Implementation Of 7QC Tools At Communication Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Faiz , Jamaludin (2010) Electronic Learning Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdaus, Abdul Ghaffar (2010) Design And Development Of Carbon Fiber Suspension Push Rod For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Firdaus, Sukri (2010) DMCF 3233: Mekanik Bendalir II. [Teaching Resource]

Mohamad Hafiz, Mohamad (2010) Determination Of Aerodynamic Drag Force Acting On Moving Heavy Duty Truck-Trailer In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Haidir, Maslan (2010) DMFD 2833: Mekanik Bendalir (Fluid Mechanics). [Teaching Resource]

Mohamad Haidir, Maslan (2010) DMFD 2853: Mekanik Bahan (Mechanic Of Materials). [Teaching Resource]

Mohamad Haniff , Harun (2010) Synchronization Of Compass Module With Pressure And Temperature Sensor System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Harris, Misran (2010) DENT 2233 : Litar Eletrik. [Teaching Resource]

Mohamad Harris, Misran (2010) DENT 2233: Litar Elektrik. [Teaching Resource]

Mohamad Isa, Mohd Sa'ari (2010) Antenna Pattern Diversity using EBG. In: Antennas and Propagation Conference (LAPC) Loughborough, 8-9 Nov 2010, Loughborough.

Mohamad Izwan, Ishak (2010) Development Of Interactive Machining Process Design And Machining Time Calculation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Lutfi, Dolhalit (2010) BITM 1113: Pembangunan Aplikasi Web. [Teaching Resource]

Mohamad Mahadi , Zahrin (2010) Static Analysis Of Moving Coil Linear DC Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mukhlis, Abu Bakar (2010) Application Of Facility Layout Software : Case Study At Isuzu Hicom Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Mustaqiim , Che Hassan (2010) New Technique Of Plastic Mould For Thermoset Composite Fabrication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nazzrein, Abd Aziz (2010) Development Of LED Character Display For Traffic Light. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Nur Adli, Mokhtar (2010) Feasibility Study Of Generating Power From Renewable Energy For Irrigation Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Ridzuan, Jamli (2010) BMFS 3373: Teknologi CNC (CNC Technology). [Teaching Resource]

Mohamad Shahrul Effendy, Kosnan (2010) Finite Element Of Human Spine CAD Model Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Shukri, Zakaria (2010) DMCM 2713: Dinamik. [Teaching Resource]

Mohamad Zin, Mohd Rody (2010) MODELLING OF THE DYNAMICS OF A DROPLET USING THE LATTICE BOLTZMANN METHOD. International Journal of Mechanical and Materials Engineering , 5 (2). pp. 276-281. ISSN 1823-0334

Mohamad Zin , Zainal Abidin (2010) A Circular Microstrip Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamad Zoinol Abidin, Abd Aziz (2010) BENT 4153: Teknik RF & Gelombang Mikro. [Teaching Resource]

Mohamad Zoinol Abidin, Abd Aziz (2010) BENT 4313: Antena & Perambatan Gelombang Mikro. [Teaching Resource]

Mohamad Zoinol Abidin, Abd Aziz and Mawarni, Mohamed Yunus (2010) BENT 4143: Kejuruteraan Antena. [Teaching Resource]

Mohamed, Mohd Ambri and Asyadi Azam, Mohd and Kawabuchi, Hitoshi and Shikoh, Eiji and Fujiwara, Akihiko (2010) Characterization of carbon nanotube field-effect transistor fabricated by direct growth method. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Mohamed, Khaled (2010) MMFD5053: Perancangan Kemudahan (Facilities Planning). [Teaching Resource]

Mohamed, Khaled (2010) MMFU5053: Engineering Optimization. [Teaching Resource]

Mohamed Khaled, Omar and Mohd. Razali, Muhamad and Abdul Hafiz, Abdul Rajak (2010) An Integrated Approach To Supplier Selection Problem. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Khaled, Omar and Nor Akramin, Mohamad and Sharmeeni, Murugan (2010) A Simulation Approach to Evaluate Quality/Cost Management Decisions. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohamed Khaled, Omar (2010) BMFP 3562: Penyelidikan Operasi (Operational Research). [Teaching Resource]

Mohamed Khaled, Omar (2010) BMFP 4613: Perancangan & Rekabentuk Kemudahan (Facilities Planning & Design). [Teaching Resource]

Mohammad Azim Shukri, Mohd Kamal (2010) Feasibility Study And Design Development On Automatic Feeder's Mechanism For Goat Breeding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Hafiz, Abdellah (2010) Selection Of Difference Equation Minimum Model Specification By Correlation Analysis. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Haniff , Hasni (2010) Radar System Simulation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Kamil, Sued (2010) DMFD 2542: Metrologi (Metrology). [Teaching Resource]

Mohammad Kamil, Sued (2010) BMFP 3542: Kejuruteraan Metrologi (Engineering Metrology). [Teaching Resource]

Mohammad Khalid, Khambali (2010) Investigation Of Fatigue Crack Growth On Heat Treated Aluminum 7075 With The Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Muhaimin , Harun (2010) Study And Implementation Of Touch Panel That Generates Electricity To Charge Gadget. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Nizam, Shamsuddin (2010) Development Of Manual Transmission Powertrain Dynamic Model For Drive Simulator. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Radzi, Motsidi (2010) BITS 2513: Teknologi Internet. [Teaching Resource]

Mohammad Radzi, Motsidi (2010) BITS 3513: Pengaturcaraan Tcp/Ip. [Teaching Resource]

Mohammad Roszwan, Jamaudin (2010) Automatic Modern Garbage System Collection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohammad Syahid , Abdul Jamil (2010) Semi-Auto Robot For Robocon. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Abid, Mohd Asyadi Azam (2010) Fabrication and Characterization of Carbon Nanotube Field-Effect Transistors Using Ferromagnetic Electrodes with Different Coercivities. Japanese Journal of Applied Physics, 49. 02BD08. ISSN Online: 1347-4065 / Print: 0021-4922

Mohd Abid, Mohd Asyadi Azam (2010) Thermal Degradation of Single-Walled Carbon Nanotubes during Alcohol Catalytic Chemical Vapor Deposition Process. Japanese Journal of Applied Physics (JJAP), 49. 02BA04. ISSN Online: 1347-4065 / Print: 0021-4922

Mohd Adil, Mat Ti (2010) Web-Based Room Appliances Controller System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Adrinata, Shaharuzaman (2010) BACS 1213: Matematik Kejuruteraan. [Teaching Resource]

Mohd Adrinata, Shaharuzaman (2010) BMCU 1052: Matematik Kejuruteraan. [Teaching Resource]

Mohd Adrinata, Shaharuzaman and Abdul Munir, Fudhail and Hassan, Muhammad Zahir and Mohamad Zin, Mohd Rody and Boejang, Hambali and Fadzillah Husaini, Muhammad Farhan and Abdul Halim, Abdul Jamal (2010) DEVELOPMENT OF A SINGLE SEAT RACE VEHICLE FOR EDUCATIONAL MOTORSPORT ENGINEERING. In: 3rd International Conference on Science & Technology: Applications in Industry & Education, 16-17 December 2010, Universiti Teknologi MARA, Pulau Pinang, MALAYSIA.

Mohd Afzanizam, Mohd Rosli (2010) BMCT 2123: Termodinamik I. [Teaching Resource]

Mohd Aizat, Mohd Noor (2010) Device For Heat Removal For Parked Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aizuddin, Yusof (2010) Application Of Gyroscope Technology In Human Mobile Transporter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akmal , Zainal Abidin (2010) PLC Application For Flood Detection And Protection Via Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Akmal Hisyam , Norruddin (2010) Friendly Aquarium Control System Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Al Fainan , Mustapha (2010) Thermal Analysis On Thermoelectric Cooling Module. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Alif , Abdul Aziz (2010) Web Based Multi Online Storefronts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ameeraldeen , Mohd Salleh (2010) System Development Of Parallel Robot With Industrial Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aminudin , Abdullah (2010) The Implementation Of Risk Management At Aerospace Manufacturing Company : Case Study 2 (Process). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Amizu , Mamat (2010) Smart Drink Dispenser Using GSM Modem. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Ammar, Mohd Zakaria (2010) Pick and Place Robot Using Line Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Aras, Mohd Shahrieel (2010) BEKC 4783: Sistem Pintar. [Teaching Resource]

Mohd Aras, Mohd Shahrieel (2010) BEKG 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Mohd Aras, Mohd Shahrieel (2010) Design and Development an Underwater Glider Using Remote Control. In: International Conference on Engineering and ICT, 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Mohd Aras, Mohd Shahrieel (2010) Design and Development an Underwater Glider using PIC for Monitoring Application. In: International Conference on Engineering and ICT, 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Mohd Aras, Mohd Shahrieel and Hairi, Mohd Hendra and Jamaluddin, Muhamed Herman (2010) Development of Hydrophone Sensor System for Autonomous Underwater Vehicle Application. In: International Conference on Engineering and ICT, 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Mohd Aras, Mohd Shahrieel and Hairi, Mohd Hendra and Kasdirin, Hyreil Anuar (2010) Development of Sonar Sensor System for Autonomous Underwater Vehicles Application. In: International Conference on Engineering and ICT, 18-20 February 2010, Holiday Inn, Melaka, Malaysia.

Mohd Aras, Mohd Shahrieel and Jamaluddin, Muhamed Herman and Kasdirin, Hyreil Anuar (2010) DESIGN AND DEVELOPMENT OF MULTI-INPUT SENSOR ALGORITHM FOR AUTONOMOUS UNDERWATER VEHICLE (AUV) APPLICATIONS. In: World Engineering Congress 2010, 02 - 05 August 2010, Kuching, Sarawak..

Mohd Ariff , Arshad (2010) Comparison Between Combination Silencer And Single Type Silencer For Two-Stroke Noise Reduction And Its Effect On Engine Power Curve. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ashaari, Omar (2010) Effect Of Chromium Carbide (Cr23C6) Formation On The Microstructure And Corrosion Passivity Behavior Of AISI 316. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Asri, Yusuff (2010) BMCD 4543: Keboleharapan Dan Kualiti Rekabentuk. [Teaching Resource]

Mohd Azahar, Mohd Noor (2010) Gantry Crane System Using Real Time Command Shaping. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan, Ahmad Zarron (2010) Low Cost Flood Alert via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azlan , Mohamed (2010) Design Of Rigid Board Material From Banana Tree Trunk Fiber. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azli, Salim (2010) BMCM 3733: Kejuruteraan Kawalan. [Teaching Resource]

Mohd Azmer, Abu Bakar (2010) Intruder Alert Via Short Message Service (SMS) For Premises. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azuwan, Md Janis (2010) An Analysis Of Micro-Hole EDM Machining On Ti-6A1-4V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Azwan, Mokhtar (2010) Automatic Pet Feeder Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Bakri, H. and Shahbodin, F. and Bakar, N. (2010) Problem Solving Steps in Online PBL. In: Proceeding 2010 4th International Symposium on Information Technology. IEEE, pp. 348-352. ISBN 978-1-4244-6716-7

Mohd Bazli, Hairrizaman (2010) Mobile Chatting Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Daud, Mohd Ahadlin (2010) Effect of Solution Treatment on Fatigue Crack Propagation Behaviour of Magnesium Alloy. International Review of Mechanical Engineering, 4 (3). pp. 238-243. ISSN 1970-8734

Mohd Dzakiudin , Saripudin (2010) Improving Of Cool Air Evacuation Process For Home Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Elfie Qasfie , Md Buang (2010) Analisis Penatahan Dan Diskriminasi Geganti Jarak Pada Talian Penghantaran Menggunakan Perisian Cape. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Fadzil, Zulkifli (2010) BITP 3433: Keselamatan Teknologi Maklumat Dan Pangkalan Data. [Teaching Resource]

Mohd Fadzili, Abdul Hamid (2010) Design Of Permanent Magnet Synchronous Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fadzli , Haridan (2010) FTMK Class Alert Notification (FTMK CAN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Ahmad (2010) Eliminating Waste : Enhancement Of Productivity Of Manufacturing Company. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fahmi, Abd Majid (2010) Development Of A Mini Turbine To Generate Electricity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fairuz, Dimin (2010) DACS 1263: Fizik Asas (Basic Physics). [Teaching Resource]

Mohd Fais, Ismail (2010) Tuning Single Cylinder Two - Stroke Engine Or Performance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz, Mat Zaid (2010) Aerodynamic Study Of Formula 1 In School For Mozac Racing Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faiz , Safee (2010) Design And Development An Underwater Glider Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal, Abdollah (2010) BITS 3323: Pengurusan Projek Rangkaian. [Teaching Resource]

Mohd Faizal, Abdollah (2010) DITS 3732: Perlaksanaan Dan Pentadbiran Infrastruktur Rangkaian. [Teaching Resource]

Mohd Faizal, Abdollah and Burairah, Hussin (2010) MITS5323: Advanced Scalable Internetwork. [Teaching Resource]

Mohd Faizal , Muhammad Zaini (2010) Remote Control Doorlock System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faizal , Mohamad (2010) Surface Finish Study Of Mild Steel Machined By Carbide Cutting Tools. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faqrul Redza , Tahiruddin (2010) The Effect Of High Voltage Stress On Different Type Of Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez , Ahmad (2010) The Design And Optimization Of Structure Body Of Three Wheeled Mobility Device For People With Lower Limb Disability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fareez Nazari, Ahmad Zahrollail (2010) Design Of Power Amplifier For Wimax Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farid, Ghazali (2010) Design And Analysis Of Modular Fixture Of PCB Routing Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faridh , Samian (2010) Design Of Two Seated Three Wheel Vehicle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fariq, Mohamad (2010) W-Shape Beam Subject To Quasi-Static Loading. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Faris, Mohd Nasirruddin (2010) Prototype Of Fire Fighter Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Farriz , Md Basar (2010) BEKP 1423: Teknologi Elektrik. [Teaching Resource]

Mohd Fasihin, Abd Satar (2010) Investigation Of Damage Process Due To Fatigue On Heat Treated Aluminum 7075 With Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzi, Abdul Aziz (2010) PIC Trainer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fauzy, Khamis (2010) Study A Pneumatic Telescopic Cylinder Arm Operation For Variable Load Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Fazli Mohd Sam, and Md Nor Hayati Tahir, and Noor Khamisah Abdul Latiff, (2010) The Awareness and The Acceptance of Islamic Pawnshops. International Journal of Research and Reviews in Applied Sciences, 2 (2). pp. 117-125. ISSN 2076-734X

Mohd Fijam , Abdul Halim (2010) Mobile Balancing Robot With Two Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ab Rashid (2010) Design And Development Of Manual Robot Using Mecanum Wheels. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Abd Rahman (2010) Laser Audio Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Mohd Nordin (2010) Development Of Simple Wind Turbine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus, Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Ibrahim (2010) Design Rules For Casting Process Using CAD Tool. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Firdaus , Jaafar (2010) Automotive Air Conditioner Booster. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Mohd Ab Halim (2010) DEKP 1323: Elektrik Dan Magnet. [Teaching Resource]

Mohd Firdaus , Abu Bakar (2010) Design And Development Of Ventilated Single Disc Brake Rotor For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdaus , Ramli (2010) Rapid Prototyping On Biomanufacturing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Firdauz, Hasan (2010) Wireless Smoke Detector Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hadyan, Wardhana (2010) Wreck' Em Down (Mobile Game Application). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafis, Hassan (2010) PIC Based Anti-Tie Down Module. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Taib (2010) Mobile Robot With Floor Measuring Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafiz , Mohd Ismail (2010) Improvement Of Medical Product Through Design For Environment (DfE) Methodology : A Case Study Dialyzer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hafizul Hanif , Ramlee (2010) "Susu Maker"; Exterior Design And Milk Powder Dispenser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Haikal , Mohd Sobri (2010) High Voltage Impulse Voltage Test On High Voltage Insulation Glove. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairi Fifi, Mansor (2010) Damaged Identification Of Mechanical System via Changes In Their Vibration Characteristics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hairul Zaid , Jamil (2010) Analisis Penatahan Dan Diskriminasi Geganti Arus Lampau Pada Sistem Jejarian Menggunakan Perisian Cape. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Halmi , Asmani (2010) Investigation On Insulation Characteristics Of Various Stages Of Palm Oil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hanif, Che Hasan (2010) DEKC 3643: Pengautomatan. [Teaching Resource]

Mohd Hanif, Harun (2010) BMCA 4643: Sistem Kuasa Kenderaan (Enjin Dan Transmisi). [Teaching Resource]

Mohd Hanif , Che Hasan (2010) DEKC 3453: Mikropemproses. [Teaching Resource]

Mohd Haslay, Ahmad (2010) Investigation On Microstructure Behavior And Haz Hardness Of Stainlees Steel AISI304 At Different Filler Wire Diameter And Volatge Using MIG Welding. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hazlan, Harun (2010) Application Of Finite Element Analysis (FEA) To Analyze The Effect Of Different Electrode Size In MIG Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hendra , Hairi (2010) BEKP 4783: Rekabentuk Sistem Pengagihan. [Teaching Resource]

Mohd Hendra , Hairi (2010) BEKU 1413: Elektronik Digit Dan Sistem. [Teaching Resource]

Mohd Hidayad , Zulkifli (2010) The Performance Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Hidayat, Shahabudian (2010) Mapping Mobile Robot With Slam Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hifzan, Mohd Sani (2010) Networked Biometric Authentication. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hilal , Abdul Aziz (2010) Study And Measurement Of Cutting Tool Coating Thickness By Usign Beta Thickness Gauging Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Hisham, Nordin (2010) BMFA 4423: Sistem Kecerdikan Buatan (Artificial Intelligent System). [Teaching Resource]

Mohd Husin, Mohd Haizal and Kong Yong, Liew and Sim Yee , Chin and Mohd Ridzuan, Nordin (2010) Bimetallic Nanoparticles Pt–M (M=Cu, Fe, or Ni) Preparation Based on Modified Polyol Method for N2O decomposition activity. In: Malaysian Technical Universities Conference on Engineering and Technology , 28-29, June , 2010, Bayview Hotel, Melaka, Malaysia.

Mohd Husin, Mohd Haizal (2010) Waste to Valuable by-Product: Kinetic and Thermodynamic Studies of Cd, Cu and Pb Ion Removal by Decanter Cake. Journal of Engineering and Technology, 1 (1). pp. 85-98. ISSN 2180-3811

Mohd Husni Mubarak, Abdul Jalil (2010) Development Of Bus Arrival Time Monitoring System Using RFID Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Imran , Wan Hassan (2010) Ascend Climbing Pole Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Irwan, Mohd Azmi (2010) Numerical Study Of Convective Heat Transfer And Fluid Flow Through Porous Media. Masters thesis, Universiti Teknologi Malaysia.

Mohd Irwan, Mohd Azmi (2010) DMCT 2123: Termodinamik I. [Teaching Resource]

Mohd Iskandar , Md Sulaiman (2010) Aquaculture control method for catfish fertilization system (web-based scada system). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Izamudin, Itam Ahmed (2010) Design And Development Of Carbon Fiber Double Wishbone Suspension Arm For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izzati Izdihar , Ibrahim (2010) Design And Development Of Automotive Smart Tail Light System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Izzuddin , Mat Noor (2010) Automatic Detection Electrical Failure System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Johari , Sanimin (2010) Ultrasonic Guided Obstacle Detection Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Juzaili, Lokman (2010) Mechanism Development Of Gripper For 5kg Payload. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Juzaili , Lokman (2010) Mechanism Development Of Gripper For 5kg Payload. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Khafizuddin, Khairddin (2010) Inverse Kinematics Solution For 6 Degree Of Freedom Of Fanuc LR Mate 200IB Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairery , Abdul Rahman (2010) Implementation Of The Security Main Gate Entrance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairi , Aripin (2010) BEKM 2443: Sistem Elektro Mekanikal. [Teaching Resource]

Mohd Khairir, Ismail (2010) Ergonomics Design And Analysis Of Bus Driver Seat. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairol, Mohd Daud (2010) A Study On Insulation Material Of Energy Saving Purposes In Rooftop Design. Project Report. UTeM, Melaka Malaysia. (Submitted)

Mohd Khairol Azizin, Toing (2010) Smart Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Anuar, Abd Razak (2010) Smart Housing Lighting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Anwar, Abdul Halim (2010) Design, Simulation And Development Of RF Switch With Defected Ground Structure (DGS) for WiMAX at 2GHz Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Azwan, Mamat (2010) Simulation Study Of Pitching And Rolling Control For Passanger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairul Faizie, Tarmudi (2010) Forward Kinematic Solution: Visualization of Rhino XR-3 Robot For 5 Degree Of Freedom. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairulnizam , Muhamat Nawawi (2010) Investigation Of Damage Process Due To Fatigue On Heat Treated Aluminum 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khairy , Zahari (2010) Design And Development Of Rectangular Waveguide Bandpass Filter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Khanapi, Abd Ghani (2010) BITP 2233: Kejuruteraan Keperluan Perisian. [Teaching Resource]

Mohd Khanapi, Abd Ghani (2010) MITP5213: Advanced Software Engineering. [Teaching Resource]

Mohd Lutfi, Nordin (2010) Study The Effect Of Heat Treatment Temperature And Time On Carbide Formation And Hardness Variation Of Deposited Nickel Based Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muhyiddin, Mustafa (2010) Aerodynamic Perform of Aircraft Propeller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Muzzammil, Roslee (2010) Design And Analysis On Structural Of Shrimp Paste Cutting Machine For Small Medium Industries (SME) In Malaysia. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nabil , Nodin (2010) Low Cost Landslide Alert Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Idris (2010) Mechanism Design Of Magnetorheological Based Antilock Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib, Mohammad Mahbor (2010) Analysis And Modelling Of Projectile Motion With Air Resistance. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najib , Shaari (2010) Design And Development Of Four Wheeled Autonomous Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Najwan, Md Khambari (2010) BITS 3533: Rangkaian Tanpa Wayar Dan Pengkomputeran Mudah Alih. [Teaching Resource]

Mohd Najwan, Md Khambari (2010) DITS 2313: Komunikasi Data Dan Rangkaian. [Teaching Resource]

Mohd Najwan, Md. Khambari (2010) BITS 2513: Teknologi Internet. [Teaching Resource]

Mohd Nashriq, Ismail (2010) Tyre Lifting System For Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nasrul Azli, Mohd Aris (2010) Design Analysis Of Bearing For Automotive Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nazri , Idris (2010) Development Of PC Based Home Appliances Controller Via Bluetooth Technology. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nazrin, Muhammad (2010) BMFG 4813: Sistem Pembuatan (Manufacturing System). [Teaching Resource]

Mohd Nazry, Mohammad (2010) Textile Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Noh, Mohd Syahrin Amri (2010) Chipping Free Process For Combination Of Narrow Saw Street(60UM)And Thick Wafer (600UM) Sawing Process. CHIPPING FREE PROCESS FOR COMBINATION OF NARROW SAW STREET (60UM)AND THICK WAFER (600UM) SAWING PROCESS, 1 (1). pp. 1-5. ISSN 1089-8190

Mohd Nor, Husain (2010) Majlis Penutup Persidangan Antarabangsa 'The 2nd International Conference On Engineering & ICT (ICEI 2010)'. [NC Speech] (Submitted)

Mohd Nor Aidi , Jamaludin (2010) Kajian Ke Atas Masalah Harmonik Dan Penghapusan Harmonik. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Nor Fakurazy , Abu Bakar (2010) Intelligent Airship Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Hayat, Abu (2010) Develop Product Sustainability Improvement For Automotive Part : A Car Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Hayat , Abu (2010) Develop Product Sustainability Improvement For Automotive Part- A Car Wiper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nor Shafiq, Idris (2010) 3D Animation : Mimpi. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Nur Azmi, Nordin (2010) Effect Of Nanoclay Loading On Mechanical Properties Of Nanocomposites. Masters thesis, Yamaguchi University.

Mohd Nurul Al-Hafiz , Sha' abani (2010) Flood Alert System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rafiz, Ramli (2010) Intruder Alert System Via Sms For Motorcycle.(PIC knowledge required). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rashdan , Abd Rahman (2010) Web-Based Device Control And Communication Via Parallel Port. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rauf, Jamaludin (2010) Design Of Control System For Automatic Steering. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Razali, Muhamad (2010) MMFS5023: Design Of Manufacturing Systems. [Teaching Resource]

Mohd Razali, Muhamad (2010) MPSW5033: Engineering And Technology Management. [Teaching Resource]

Mohd Razali , Mohamad Sapiee (2010) DEKE 3343: Elektronik Industri. [Teaching Resource]

Mohd Razali , Mohamad Sapiee (2010) BEKM 4673: Sistem Pintar & Kecerdikan Mesin. [Teaching Resource]

Mohd Ridhwan, Nagib (2010) Interactive Jawi For Dyselxia Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridhwan, Mohd Jaih (2010) The Implementation Of Exponential Smoothing Technique In Forecasting Demands For SMI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Riduan, Ahmad (2010) BENE 3173: Sistem & Rangkaian Komputer. [Teaching Resource]

Mohd Riduan , Ahmad (2010) Cooperative Mimo Communications In Wireless Sensor Networks. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Ridzuan , Abdul Rahman (2010) Kajian Hubungan Antara Perlaksanaan Keselamatan Dan Kesihatan Pekerjaan Dan Kadar Kemalangan Dalam Bidang Industri Terpilih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rizal, Salleh (2010) MMFS5033: Lean Manufacturing. [Teaching Resource]

Mohd Rizuan, Baharon (2010) DACS 1253: Matematik Sains Komputer I. [Teaching Resource]

Mohd Rizuan, Baharon (2010) DACS 1283: Matematik Sains Komputer II. [Teaching Resource]

Mohd Rody , Mohamad Zin (2010) Numerical Study of Droplet Dynamics on Solid Surface. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 2 (2). pp. 92-100. ISSN 2180-1053

Mohd Roee , Mohd Tasrip (2010) Automatic Adjustable Speed Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Roszaimie, Mohd Ramli (2010) Design Of Ridden Hexapod Robot For Amusement Park. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Rusdy, Yaacob (2010) Research On Sensors Technology In Medical And Health Care Systems. Masters thesis, University of Siegen.

Mohd Ruzaini, Mohd Razif (2010) Enhancement Of MPLS IPVPN Backup Network From ISDN to ADSL Interm Of Time Switching. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Saharuddin, Noordin (2010) A Comparison Study Of Existing Costing System With Activity Based Costing System (ABC) At A Metal Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sanusi, Azmi (2010) BITP 3123: Pembangunan Aplikasi Teragih. [Teaching Resource]

Mohd Seiful Ezuan, Sayuti (2010) Direct Metal Deposition Of Stainless Steel Using Wire Feed Method : An Experimental Study On Microstructural Development And Microhardness Variations. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaarani, Mohd Hashim (2010) Design And Development Of Lightweight Chassis For UTeM Formula Style Race Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shah, Hairol Nizam (2010) BEKM 4683: Penglihatan Mesin. [Teaching Resource]

Mohd Shah, Hairol Nizam (2010) BEKC 2433: Isyarat Dan Sistem. [Teaching Resource]

Mohd Shahir, Mohd Shahrom (2010) An Engineer's Solution To Housefly Menace In A Premise. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahrieel, Mohd Aras and Hyreil Anuar, Kasdirin and Muhammad Herman, Jamaluddin (2010) Design and Development of Multi-Input Sensor Algorithm for Autonomous Underwater Vehicle (AUV) Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shahril , Ahmad Fauzi (2010) Design, Development And Test KR-150 Go-Kart. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shaifudin, Adam (2010) High Voltage Impulse Test On The Safety Boots. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sharif, Mohamad (2010) PPRT selection technique using analytical hierarchy process. Masters thesis, UTeM.

Mohd Sharul , Abu Bakar (2010) Sistem Penempatan Petugas Peperiksaan (E-SPPP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Mohd Sharulrizam, Abd Rahim (2010) Optical Fiber Audio Communication System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Shukor, Salleh (2010) BMFS 2523: Proses Pembuatan II (Manufacturing Process II). [Teaching Resource]

Mohd Shukree, Saibu (2010) Development Of Material Requirement Planning, A Case Study In Metal Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Soufhwee, Abd Rahman (2010) DMFD 3582: Kawalan Kualiti (Quality Control). [Teaching Resource]

Mohd Soufhwee, Abd Rahman (2010) DMFD 3513: Pengurusan Pembuatan (Manufacturing Management). [Teaching Resource]

Mohd Soufwee, Abd Rahman (2010) DMFD 3892: Prinsip Pengurusan (Management Principles). [Teaching Resource]

Mohd Subhan, Gharat (2010) Automatic Mail Detector Via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Sukri Sazlan , Sapee (2010) Study The Effect Of Different Process Of The Mechanical And Physical Properties On The Coconut Coir Fiber Reinforced LDPE Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syafiq , Ahmad Roseli (2010) Design Improvement Using Design For Manufacture & Assembly (DFMA) Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahir Asyraf, Mohammed Tahir (2010) Environmental Effect On Composite Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahiran , Mohamed (2010) Automatic Box Packing Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Syahrin, Amri and David , Liew and Fuaida, Harun (2010) Chipping free process for combination of narrow saw street (60um) and thick wafer (600um) sawing process. In: 34th IEEE/CPMT International Electronic Manufacturing Technology Symposium (IEMT), Nov. 30 2010-Dec. 2 2010 , Melaka. (Submitted)

Mohd Syauqee, Mohd (2010) The Application Of Voice Verification For Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Tahir , Musthafah and Yamada , Noboru (2010) Thermodynamic Analysis of Expansion Profile for Displacement-type Expander in Low-temperature Rankine Cycle. Journal of Thermal Science and Technology, 5 (1). pp. 61-74. ISSN 1880 - 5566

Mohd Taib, Dora and Ahmad Jawahir, Tugimin and Rosli, Saadan and muhd Akmal Noor, Rajikon (2010) Paten Dan Isu-Isu Industri Pelancongan Di Melaka. Project Report. UTeM. (Submitted)

Mohd Taib, Dora and Syed Najmuddin , Syed Hassan and Hazmilah, Hasan and Mohamad, Bokhari and Noraini , Husin and Mohd Fauzi, Kamarudin (2010) Kajian Persepsi Awam Terhadap Jenayah Di Negeri Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Taufik, Taib (2010) DMCU 1032: Matematik Asas. [Teaching Resource]

Mohd Warikh, Abd Rashid (2010) BMFB 4212: Kakisan & Degradasi (Corrosion & Degradation). [Teaching Resource]

Mohd Yuhazri, Yaakob (2010) BMFB 3273: Komposit & Bahan Termaju (Composites & Advanced Materials). [Teaching Resource]

Mohd Yunos , Ali (2010) DEKC 1513: Pengukuran. [Teaching Resource]

Mohd Yusoff, Sulaiman (2010) BMCF 4253: Mesin Turbo. [Teaching Resource]

Mohd Yusoff, Sulaiman (2010) BMCT 3143: Pemindahan Haba dan Jisim. [Teaching Resource]

Mohd Yusop, Sophya Liyana (2010) Automatic Handwash System Using Microncontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Yuzairi, Yaakob (2010) BMFG 1833: Mekanik Mesin (Mechanics Of Machines). [Teaching Resource]

Mohd Zaid, Akop (2010) BMCF 2223: Mekanik Bendalir I. [Teaching Resource]

Mohd Zaidi, Husin (2010) GSM 900 Mobile Jammer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Mohammad Nasir and Khisbullah, Hudha and Faizul Akmar, Abdul Kadir and Mohd Hanif, Harun and Ubaidillah, . (2010) Design And Development Of A Magnetically Activated Engine Mounting System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zakaria, Jakaria (2010) Design A Mini Depanelize Jig to Separate PCBA's From Panel Into Single Pieces. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zaki, Mas'ud (2010) BITS 3413: Keselamatan Teknologi Maklumat Dan Rangkaian. [Teaching Resource]

Mohd Zaki, Mas'ud (2010) BITS 3423: Keselamatan Teknologi Maklumat. [Teaching Resource]

Mohd Zarul Hazim, Norudin (2010) Product Development Of Semi Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zarul Hazim, Norudin (2010) Product Development Of Semi Automatic Slump Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zawavi, Zulkafli (2010) Development Of Recoiling And Reshapable Car Bumper. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zhafri, Mohd Yaacob (2010) Study And Implementation Of Speed Chess Clock. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zharif, A. Rahim (2010) Patient Registration System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zharif, Zakaria (2010) Mechanism Design Of Mr Brake For Formula Varsity Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mohd Zin, Mohd Shahril Izuan (2010) A Review of UWB MAC Protocols. In: 2010 Sixth Advanced International Conference on Telecommunications (AICT), 9-15 May 2010, Barcelona, Spain.

Mohd Zulkefli, Selamat (2010) BMCG 1123: Statik & Mekanik Bahan. [Teaching Resource]

Mohd. Syafiq , Md. Taib (2010) Merekabentuk Dan Menganalisa Mekanisma Pergerakan Tangan Mekanikal Menggunakan Lego Mindstorms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muda, N. A. (2010) MODIFIED AIS-BASED CLASSIFIER FOR MUSIC GENRE CLASSIFICATION. In: 11th International Society for Music Information Retrieval Conference, 9 - 13 August 2010, Utrecht, Netherlands.

Muda, A. K. and Shamsuddin, S. M. and Abraham, A. (2010) Improvement of Authorship Invarianceness for Individuality Representation in Writer Identification. International Journal on Non-Standard Computing and Artificial Intelligence - Neural Network World. pp. 371-387. ISSN 1210-0552

Muhaizad , Muhiyddin (2010) Production Yield Analysis Of An Automotive Component Using General Linear Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Aazzmour, Ismail (2010) E-Learning: Harmonic Analysis Of Power Electronic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Alif , Abu (2010) Motorcycle Anti-Theft System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Faizal , Yaakub (2010) DEKE 2333: Elektronik Berdigit. [Teaching Resource]

Muhamad Hafiz , Norrosnan (2010) Home Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Hafizuddin, Mohd Ridowan (2010) The Design Of A Pre-Assembly Of Blood Collection Tube Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Irmansyah , Musa (2010) Counting And Limitation System For Passenger In Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Khairi, Aripin (2010) BEKM 2243: Sistem Elektro Mekanikal. [Teaching Resource]

Muhamad Khairi , Aripin and Nurdiana , Nordin (2010) BEKC 3653: PLC & Automasi. [Teaching Resource]

Muhamad Rizal, Nari (2010) Mechanism Development Of Three Link Manipulator Applied As Prosthetic Foot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Ruslan, Muhamad Fairuz (2010) Short Term Load Forecasting With Feed Forward Neural Network Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Shah Rul, Kamaruddin (2010) Kesan Pengurangan Bunyi Oleh Penyenyap Jenis Reaktif (Diffusing Silencer) Daripada Perubahan Bentuk, Isipadu Dan Offset Paip Masukan Dan Keluaran. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Suffian Effendi, Md Yusuf (2010) Simulation Study On Active Seat Suspension For A Passenger Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yazid, Abd Latif (2010) Producing Calcium Copper Manganese Oxide (CaCu3Mn4012) Via Wet-Chemistry Technique (Percipitation Technique). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Yazid, Abd Latif (2010) Producing Calcium Copper Manganese Oxide via Wet Chemistry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhamad Zulazhar , Abd Halim (2010) Programmable Mechanically Drum Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Aizuddin, Abd Aziz (2010) The Design Of Mechanism Mechanical Ventilation System Using Solar System For Car Below The Sunlight. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf, Shahidon (2010) Design, Simulation And Analysis Of Defected Ground Structure (DGS) On Hybrid Microwave Integrated Circuit (HMIC) For RFIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf , Masrohe (2010) Analysis Of AC Transformer And DC Machines By Using Labview. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Asyraf , Masrohe (2010) Analysis Of AC Transformer And DC Machines By Using Labview. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Azizi , Zaid (2010) E-Grading For Student Project. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Azuan, Fauzan Punijan (2010) Analisis Minyak Pelincir Baru Untuk Kereta Dengan Menggunakan Four-Ball Tester. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi , Miskon and Ahmad Zaki, Shukor and Nurilyana, Apandi (2010) Gyroscope Integrated Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fahmi , Miskon (2010) BEKC 4773: Robotik Dan Automasi. [Teaching Resource]

Muhammad Fahmi , Miskon (2010) BEKC 4773: Robotik Dan Automasi. [Teaching Resource]

Muhammad Faisal , Jesmani (2010) Smart Submit System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Jansar (2010) Design And Development Braking System For Patrol Mobility Device. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Faiz, Abdul Salim (2010) Simulation Evaluation Of Magnetorheological Brake Based On Anti-Lock Braking System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Fakhrul Naim , Muhammad Helwi (2010) Teacher-Student Networking Portal. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Fansuri , Muhyaddin (2010) Design For Environment (DFE) Improvement On Electronic Product : A Case Study On A Mobile Phone Housing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Farhan, Abdul Latif (2010) Development Of Fuzzy Logic Temperature Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Firdaus , Mustapa (2010) Jawi Characters DOT Matrix LED Sliding Text Displayer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hadi , Muhammad Kamaruddin (2010) VOIP Over IPV6 Testing. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hafizi, Zainal Abidin (2010) To Design and fabricate projectile motion prototype device for students Use In Dynamic. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haikal , Hisam (2010) A Study On The Impact Of Injection Molding Parameters On The Processed Plastic Product Dimensional Stability. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hakim, Harun (2010) Design of Microstrip Antenna with Parasitic Element. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Hanif , Bachok (2010) Voice Controlled Wheelchair. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haziq, Lim Abdullah (2010) BITM 2123: Teknologi Audio Dan Video Digital. [Teaching Resource]

Muhammad Haziq, Lim Abdullah (2010) BITM 3213: Komputer Grafik Interaktif. [Teaching Resource]

Muhammad Haziq, Abidin (2010) Effect Of Air Velocity And Moisture Content On Solid Waste Combustion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Haziq Lim, Abdullah (2010) Designing And Developing Mobile Intelligent Dynamic Route Map Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Helmi, Jamil (2010) Automatic Part Feeder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Idzhar, Ishak (2010) A Study On The Structural Integrity Of Octagonal Shape Bottle Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Iffat, Md Zainal (2010) Cigarette, No 1 Killer (Anti Smoking Advertisement) Using 3D Animation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Imran, Md Hatta (2010) Staff Training Notification System via SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Ismail, Ibrahim (2010) Comparison Between IPv4 And IPv6 Over WLAN Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Izzat, Ramlan Ross (2010) Design And Analysis Of Intelligent Multiple Gantries System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Kamil, Adnan (2010) Optical Fiber Communication System Interface With Sharc ADSP-21065L. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Khairul Azhar, Amran (2010) FTMK - Lab Equipments Booking System (FTMK - LEBS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Luqmannul Hakim , Ahmad Buhairi (2010) Auto-Voltmeter Measurement Tool System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Muslim , Mustaffa (2010) The Holder Of Thermoelectric Power Generator (TEG) Based Hi-Z Thermoelectric Modules. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Muhammad Nashriq, Mohd Haris (2010) Renewable Energy (Solar Power) Mini Prototype Plant With Scada System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nizam, Kamarudin and Sahazati, Md. Rozali (2010) Estimator And Controller Design For A Didactic Liquid Level System By System Identification Approach. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Nizam , Kamarudin and Aminurrashid , Noordin and Zaihasraf , Zakaria and Khamis, Aziah (2010) BEKU 1413: Elektronik Digit & Sistem. [Teaching Resource]

Muhammad Nizam , Kamarudin (2010) BEKU 1123: Litar Elektrik 1. [Teaching Resource]

Muhammad Noorazlan, Zainudin (2010) BENC 4173: Teknologi Multimedia Dan Aplikasi. [Teaching Resource]

Muhammad Norpazmil , Che Pa (2010) Design And Prototyping Of Human Following Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Shahrul Hafizan , Ahmad Fadzil (2010) Design And Analysis Of Proton MPV Bumper Robot Jig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Sharil , Yahaya (2010) DEKP 3763: Sistem Kuasa. [Teaching Resource]

Muhammad Sharil , Yahaya (2010) DEKP 3033: Pengamalan Kejuruteraan. [Teaching Resource]

Muhammad Syafiq, Syed Mohamed (2010) BMFP 3513: Kejuruteraan Industri (Industrial Engineering). [Teaching Resource]

Muhammad Syafiq , Ahmad Tarmidi (2010) Development Of Statistical Process Control Software For Small Medium Industries (SMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syahrir, Johal (2010) BENT 2243: Isyarat Dan Rangkaian. [Teaching Resource]

Muhammad Syahrir, Johal (2010) BENT 4113: Sistem Perhubungan Digit. [Teaching Resource]

Muhammad Syukri, Abdul Latib (2010) Mechanism Design Of Active Geometry Control Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Syukri, Ismail (2010) Design Optimization For The Active Bumper System Test Rig. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Yusri Fadzli , Yusoff (2010) Mekanisme Pencuci Untuk Mencuci Kotoran Pada Batang Tebu Untuk Peniaga Air Tebu Kecilan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zahir, Hassan (2010) BACS 2222: Kaedah Berangka. [Teaching Resource]

Muhammad Zahir, Hassan (2010) BACS 2222: Kaedah Berangka. [Teaching Resource]

Muhammad Zahir , Hassan (2010) BACS 2222: Kaedah Berangka. [Teaching Resource]

Muhammad Zaidan, Abdul Manaf (2010) DMCU 2052: Matematik Kejuruteraan. [Teaching Resource]

Muhammad Zubir, Omar (2010) Automatic Control Room Temperature. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhammad Zulfadli , Zakaria (2010) Handy Mobile Shopping Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Akmal Noor, Rajikon and Rosli, Saadan and Nizam, Yusof and Syed Najmuddin , Syed Hassan (2010) Kajian Keperluan Latihan Memantapkan Kemahiran Insaniah Pengusaha Pengusaha Pelancongan Di negeri Melaka Dan Negeri Sembilan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Fahmi, Ismail (2010) FTMK Student Mobile Chatting System Via Bluetooth. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Nurafiz, Hussein (2010) Gas Powered Model Car. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muhd Syafiq, Mohd Yusof (2010) Performance Test Of Electric And Electro-Hydraulic Parking Brake. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murni Baizura, Azmi (2010) Sistem Lampu Isyarat Pintar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Murni Baizura , Azmi (2010) Sistem Lampu Isyarat Pintar. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Mustafa , Manap (2010) DEKC 2323: Instrumentasi. [Teaching Resource]

Mustafa , Manap (2010) DEKC 3813: Kejuruteraan Sistem Kawalan. [Teaching Resource]

Mustafar, Ab. Kadir (2010) BMCI 4573: Pengurusan Produk. [Teaching Resource]

Mustafar, Ab. Kadir (2010) BMFG 2133: Rekabentuk Industri. [Teaching Resource]

Mustapha, Ramlee and Omar, Mustaffa and Syed Hassan, Syed Najmuddin and Mohd Yasin, Ruhizan and Mohd Salleh, Norani (2010) Human Capital Development of Orang Asli Youth: Supportive and Suppressive Factors. ScienceDirect Procedia Social and Behavioral Science. pp. 592-600. ISSN 1877-0428

Musthafah, Mohd Tahir (2010) BMCU 1022: Kaedah Ujikaji. [Teaching Resource]

Musyriff, Mustafa (2010) Foldable Electric Bicycle Using Hub Motor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Muzalna, Mohd Jusoh (2010) BMFM 1213: Matematik Kejuruteraan (Engineering Mathematics). [Teaching Resource]

N

N. K., Makhtar and A. R. , Ismail and N. , Jusoh and A. P. , Puvanasvaran (2010) THERMAL COMFORT IN TECHNICAL SCHOOL: PHYSICAL MEASUREMENT APPROACH. In: National Conference in Mechanical Engineering Research and Postgraduate Studies (2nd NCMER 2010), 3-4 December 2010, Faculty of Mechanical Engineering, UMP Pekan, Kuantan, Pahang, Malaysia.

Nabilah, Mohd Safar (2010) Optimum Cycle Time Based On Jig And Workstation Design Combinations. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nabilah , Abdul Ghaffar (2010) Alcoholic Liver Disease Expert Using Multilayer Feed-Forward Neural Network. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nadlene, Razali (2010) Determination Of The Flow Curve Of Necking Tensile Specimen. Masters thesis, Universiti Teknologi Malaysia.

Nadlene, Razali (2010) BMCS 3333: Mekanik Pepejal II. [Teaching Resource]

Nadlene , Razali (2010) Determination Of The Flow Curve Of Necking Tensile Specimen. Masters thesis, Universiti Teknologi Malaysia.

Nanna Suryana, Herman (2010) BITP 3343: Penggudangan Data & Perlombongan Data. [Teaching Resource]

Nanna Suryana, Herman (2010) BITP 3343: Penggudangan Data & Perlombongan Data. [Teaching Resource]

Nanthakumar , Munisamy (2010) Smart Cage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nanthakumaran , Doraisamy (2010) 2D Game For Dyslexia Children. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nasrul Hakim , Khalid (2010) Air Flow Distribution Of A Fan Using CFD Method. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nazarail, Ab Majid (2010) Tensile Fracture Behavior On Temepred AISI 1040 Medium Carbon Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Naziha Hanim , Sharuddin (2010) Imaging Concentration Profile Of Multiphase Flow By Using Infrared Based Tomography. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazri, Muhammad Nasiruddin (2010) Automatic Waste Disposal Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nazri Huzaimi, Zakaria (2010) DMCB 2423: Sains Bahan. [Teaching Resource]

Neilson, Peter Sorimpuk (2010) Design And Development Of Remote Controlcar Starter System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

New , Eu Gene (2010) Space: A New Frontier. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Guan Yao (2010) The Effect Of Coupling Agent Addition To The Mechanical Properties Of Wood Plastic Composite (WPC) Made Of Recycled High Density Polyethylene (RHDPE) And Recycled Wood Flour (RWF). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng, Yin Teng (2010) Design Analysis And Modification Of Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ng , Chia Chie (2010) FTMK Lab And Asset Management System (FLAMS) Asset Management. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ng , Tiong Lee (2010) My Puppy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ngo, Hea Choon (2010) DITG 1112: Kemahiran Komputer. [Teaching Resource]

Ngo, Hea Choon (2010) DITG 1113: Pengaturcaraan Komputer. [Teaching Resource]

Ngo, Hea Choon (2010) DITS 1113: Pengenalan Teknologi Maklumat. [Teaching Resource]

Ngo , Boon Kiat (2010) Industrial Monitoring Via Text Messaging With Embedded Programming. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nicholas, Cyril Donovan (2010) Surface Roughness Analysis Versus Depth Of Cut In CNC Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Aziah , Abdul Aziz (2010) PIC-Based Temperature Monitoring System Via CAN Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Aminuddin , Nik Ibrahim (2010) Intruder Alert Via SMS For Motorcyle. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nik Mohd Zarifie, Hashim (2010) BENC 4133: Pemprosesan Isyarat Digit. [Teaching Resource]

Nik Mohd Zarifie, Hashim and Nur Alisa, Ali (2010) BENG 2223: Teknologi Mikropemproses. [Teaching Resource]

Nik Syahrim , Nik Anwar (2010) BEKM 2342: Pengantar Sistem Mekatronik. [Teaching Resource]

Nikmah , Abd Muin (2010) Solid Fuel From Empty Fruit Bunch Fiber And Recycled Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Affandy, Abas (2010) Experimental Validation Of Aftermarket Fuel Saving Device (Voltage Stabilizer). Project Report. UTeM, Melaka, Malaysia. (In Press)

Noor Asmah, Arshad (2010) Design And Fabricate An Optimize Mechanism For Fruit Plucker To Be Commercialized. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Asyikin, Sulaiman (2010) BENE 1123: Asas Kejuruteraan Elektronik. [Teaching Resource]

Noor Asyran , Ishak (2010) Fast Ordering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azhar, Tahir (2010) Development Of Fruit Maturity Testing System Using RF Properties. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azli, Mohd Baharden (2010) Library Assistant Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azwan, Shairi (2010) BENT 4373: Rekabentuk Litar Rf & Kejuruteraan Gelombang Mikro. [Teaching Resource]

Noor Azwan, Shairi and Badrul Hisham, Ahmad (2010) Design of Defected Ground Structure as a Quarter Wavelength at 2.4 GHz. In: MUCET2010 Malaysian Technical Universities Conference on Engineering and Technology, 28-29 June 2012, Bayview Hotel, Melaka, Malaysia.

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Anuar Faidz, Osman (2010) Single Series and Double Shunt SPDT Switch with Defected Ground Structure for Wireless Data Communication at 2.4 GHz Band. In: International Symposium on Broadband Communication (ISBC), 11-14 July 2010, Melaka, Malaysia.

Noor Azwan, Shairi and Badrul Hisham, Ahmad and Mohamad Zoinol Abidin, Abd. Aziz (2010) Defected Ground Structure (DGS) in Low Power SPDT RF Switch Design for WIMAX Application at 2GHZ Frequency Band. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Azwan , Shairi and Badrul Hisham , Ahmad and Tharek, Abdul Rahman (2010) Performance Analysis of Adjacent Channel Rejection due to Channel Reject Filter in RF Superhetrodyne Receiver based on IEEE 802.11a Standard. In: 2010 Indonesia-Malaysia Microwave-Antennas Conference (IMMAC 2010) , 11-12 June 2010, Jakarta, Indonesia.

Noor Farhana Halil , Abdul Razak (2010) A Simple ID Detection Using Infrared Sensors. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Haznil Ikmal , Abdul Jalil (2010) Feedrates Optimization And In Ball End Milling Of Mild Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Hurul-Ain, Mohamad (2010) Performance Analysis Of Video Transmission Over IEEE 802.16 Architecture. Project Report. 2010, Melaka, Malaysia. (Submitted)

Noor Hurul-Ain , Mohamad (2010) Performance Analysis Of Video Transmission Over IEEE 802.16 Architecture. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Idham , Sulaiman (2010) Performance Comparison Between Centralized And Distributed IDS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Mazlina, Mahmod (2010) BENC 3123: Struktur Data. [Teaching Resource]

Noor Mazlina, Mahmod (2010) BENC 4123: Sistem Masa Nyata. [Teaching Resource]

Noor Mazlina , Mahmod and Nor Haslinda, Ismail and Wong , Yan Chiew (2010) Measuring Structural Similarity Between Process Variants Using Petri Nets For Process Design And Redesign Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Munirah , Marzuki (2010) Muslimah Avatar Application Prototype. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noor Shahida, Mohd Kasim (2010) DENC 2443: Sistem Digit. [Teaching Resource]

Noor Shahida, Mohd Kasim and Siti Normi, Zabri @ Suhaimi and Siti Rosmaniza, Ab Rashid and Yap, David Fok Weng (2010) Performance Analysis on Decoding Algorithms of Turbo Codes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Shakirah , Ismail (2010) Food Ordering System Via Wireless. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noor Wahidah, Gulam Mahfuze (2010) Experimental Investigation On Sound Transmission Loss Of Acrylic Perforated Panel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooraziera Akmal , Sukor (2010) Air Pollution Alarm System (APAS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noorfizlen , Mohd Nasir (2010) The Implementation Of Risk Management In Metal Industry : Case Study 2 (FMEA). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nooririnah, Omar (2010) DMFD 2222: Sains Bahan (Material Science). [Teaching Resource]

Nooririnah, Omar (2010) DMFD 3253: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Nooririnah, Omar and Jeefferie, Abd Razak and Yuhazri, Yaakob and Toibah, Abd Rahim (2010) Effect of CO2 Flow Rate and Calcination Temperature on the Synthesis Nanosized Precipitated Calcium Carbonate. In: 2nd ASEAN-APCTP Workshop on Advanced Materials Science and Nanotechnology Penang, Malaysia, 21-23 December 2010, Penang.

Noorlin Rawaida, Mohd Isa (2010) Performance Analysis In Terms Of Bit Energy To Noise Ratio Spectral Density On Decoding Algorithms Of Turbo Codes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Akramin, Mohamad (2010) DACS 1273: Statistik Kejuruteraan. [Teaching Resource]

Nor Akramin, Mohamad (2010) DMFM 2212: Matematik Kejuruteraan (Engineering Mathematics). [Teaching Resource]

Nor Ashikin , Mohamad Hanafiah (2010) Development Of Smart Switch For Energy Saving Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Atikah, Mohamad Rosli (2010) Basic Power System Smart Learning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azlin, Ali (2010) A Case Study Of Kaizen Implementation In SMI. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Azman, Mat Ariff (2010) BITS 3313: Pentadbiran & Pengurusan Rangkaian. [Teaching Resource]

Nor Azman, Mat Ariff (2010) DITS 3622: Penghala Dan Penghalaan Cisco. [Teaching Resource]

Nor Azmmi, Masripan (2010) DMCG 1123: Statik Dan Mekanik Bahan. [Teaching Resource]

Nor Basyirah , Hamdan (2010) Flood Detector Emergency Warning. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Diana , Ismail (2010) Taman Tasik Utama 3 UTeM Hostel Registration System (THRS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nor Fadilah, Mokhtar (2010) MHP Online Shopping System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Farah Hidayah , Badul Zaman (2010) Parking Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Hanim, Md Razali (2010) Microcontroller Training System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Haslinda, Ismail (2010) BITP 2213: Kejuruteraan Perisian. [Teaching Resource]

Nor Haslinda, Ismail (2010) BITP 2213: Kejuruteraan Perisian. [Teaching Resource]

Nor Haslinda, Ismail (2010) BITP 3213: Ujian & Jaminan Kualiti Perisian. [Teaching Resource]

Nor Hasrimin , Md Nor (2010) Performance Analysis In Term Bit Error Rate (BER) On Decoding Algorithm Of Turbo Codes. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Kamariah , Mohamad Khalid (2010) A Study Of Effects Of Machining Parameters On Surface Roughness In End Milling. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Liana, Salleh (2010) Study On Stress Measurement For Round Bar By Impact Sound. Masters thesis, Takushoku University.

Nor Liana, Salleh (2010) BMCB 1423: Sains Bahan. [Teaching Resource]

Nor Saidatina , Abdul Latif (2010) Design Of Slot Planar Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nor Salim, Muhammad (2010) A Study Of Guided Wave Pipe Inspection : Visualization Of Guided Wave Propagation In A Pipe And Defect Imaging With A Scanning Laser Source Technique. Masters thesis, Nagoya Institute of Technology.

Noradilah, Auyob (2010) Design Of SMD PCBA For ADE7169 Based Single Phase Power Meter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Noradilah , Auyob (2010) Design Of SMD PCBA For ADE7169 based single phase power meter. Project Report. UTeM, Melaka. (Submitted)

Norafra Azmira , Adnan (2010) Spa Online System (SOS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norashid, Idrus (2010) Sway Reduction On Gantry Crane System Using Delayed Feedback Signal (DFS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasiken , Bakar and Faaizah, Shahbodin and Saira Hani , Musa and Burairah, Hussin and Ibrahim, Ahmad (2010) Development and Effectiveness of 3D Visualization Courseware for Isomerism Alkene at MRSM Terendak Melaka. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norasikin, Mohd Adili (2010) DITM 3622: Pembangunan Aplikasi Macromedia Flash. [Teaching Resource]

Norayu, Abd Ghani (2010) Passive Measurement Method For Unknown Network Protocol Identification and Classification. Masters thesis, UTeM.

Norazilah , Mat Hassan (2010) Interactive Comic Maker In Mobile Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazlin, Mohammed (2010) BITM 1113: Sistem Multimedia. [Teaching Resource]

Norazlin, Mohammed (2010) BITM 1123: Pengarangan Media Interaktif. [Teaching Resource]

Norazmir , Amat Basri (2010) Clamper Powered By Pneumatic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norazni, Yusoff (2010) Design And Implementation Of Orthogonal Frequency Division Multiplexing Receiver. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Noreffendy, Tamaldin (2010) Experimental Investigation Of Emission From A Light Duty Diesel Engine Utilizing Urea Spray SCR System. PhD thesis, Coventry University.

Norfarhana , Romeli (2010) Development Of Learning Objects For Telecommunication System (BENT 3313). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafiz, Salim and Mohd Saifuzam, Jamri and Aminurrashid , Noordin and Mohd Faizal, Yaakob (2010) Development Of Lighting Controlled Technique Via GSM Based. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafizah, Hassan Basri (2010) Pump House SCADA System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhafizah, Mohamad Dasuki (2010) Design And Optimization Of The Toilet Wheelchair As Assissting Aid For Elderly And Disable Persons For Daily Usage. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norhaziah, Md Salleh (2010) BITP 2113: Analisa Algoritma. [Teaching Resource]

Norhaziah, Md. Salleh (2010) MITP5313: Current Trend Of Database Technology. [Teaching Resource]

Norhidayah, Mohamed Hussin (2010) An Application Of Statistical Quality Control On Process Improvement: Case Study In Stayrod Manufacturing. Masters thesis, UTeM.

Norhidayah, Mohamad Yatim (2010) BENC 1133: Pengaturcaraan Komputer. [Teaching Resource]

Norjulia Suriati , Ghazaly (2010) Empty Fruit Bunch Fiber Composite. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norjuliana, Juhari (2010) Beverage Can Vending Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norkhairunisah , Mohamad (2010) Hybrid Composite Using Recycle Plastic Bag. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norlaila , Abu Taib (2010) Power System Analysis Using Power System Computer Aided Design (PSCAD). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Norshahira, Mohd Fauzi (2010) Study The Mechanical Properties On Biocomposites Of Kenaf Fibers. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norsyazila, Abu Bakar (2010) Titania-sliver Composite Thin Film Coating On Glass For Photocatalsis And Potential Antimicrobial Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nortazi, Sanusi (2010) BACS 2212: Statistik. [Teaching Resource]

Nortazi, Sanusi (2010) DMCU 3082: Statistik. [Teaching Resource]

Norul Aqidah , Mohd Zawawi (2010) Smart Order System In Restaurant Using Cable And Microcontroller PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Norwahida Syazwani, Othman (2010) Exam Timetabling Using Graph Colouring Approach. Masters thesis, UTeM.

Norzihani, Yusof (2010) BACS 1263: Matematik Sains Komputer II. [Teaching Resource]

Nugraha , Ardi (2010) Student Portal With GSM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Aidawaty, Rafan (2010) DMFD 2433: Instrumentasi & Kawalan (Instrumentation & Control). [Teaching Resource]

Nur Akhmar, Parlam (2010) Study Of Belt Stretch In Relation To Rotational Speed. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Alisa, Ali (2010) DENC 2433: Litar Logik. [Teaching Resource]

Nur Amani, Nor Idi (2010) Renewable Energy Automatic Switch For Home Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Bazilah, Mohamad Suhaimi (2010) Ultra Violet Scanner, PCB Developer And Etching Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Dalila , Mohd Nasir (2010) A Simulation Of Elliptic Curve Diffe-Hellman Key Exchange As A Teaching Tool. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Fadila, Rasdi (2010) A Study On Hard Turning Process Of Ti-6AI-4V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Faisya, Khairul Nurial Said (2010) Coin Antenna Design. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farah Anis , Abd Aziz (2010) Plate Number Recognition System (PNRS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Farhana, Shabuddin (2010) Development Of Interactive Comics: Bersama Ewan, Erika & Keluarga. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Farizan, Ayoob (2010) The Effect Of Sintering Temperature And Clay Addition Towards Glass Ceramic Produced From Recycle Glass By Using Pressing Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fasiha, Nazirmuidin (2010) Study Of Heat Exchanger Effect In A Car Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fathiah, Mohd Nor (2010) Development Of Low Pressure Water Hydraulic System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Fatihah, Azmi (2010) The Research About Josephson Tetrode. Masters thesis, Takushoku University.

Nur Fatihah, Azmi (2010) BENC 2513: Asas Pemprosesan Isyarat Digit. [Teaching Resource]

Nur Hafizah , Amri (2010) Kindergarten Smart Card. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Hakimah, Ab. Aziz and Azhan, Ab. Rahman (2010) Simulation on simulink AC4 model (200HP DTC induction motor drive) using fuzzy logic controller. In: 2010 International Conference on Computer Applications and Industrial Electronics (ICCAIE), 5-8 Dec. 2010, Kuala Lumpur . (Submitted)

Nur Hamizah , Hazmi (2010) System Management Aqiqah And Qurban Online (SMAQO). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Hanani, Mat Zali (2010) Effect Of Inclined Ball Milling Process On Aluminium Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Huda, Mohd Amin and Mohd Ruddin, Ab Ghani and Hyreil Anuar, Kasdirin (2010) Development Of Advanced Control Systems For Comparison Stability Study Of A Robotic Leg Application. Project Report. UTeM. (Submitted)

Nur Ilyana , Anwar Apandi (2010) BEKA 1123: Aljabar & Kalkulus. [Teaching Resource]

Nur Ilyana , Anwar Apandi and Tay, Choo Chuan and Irma Wani , Jamaludin (2010) BEKA 1233: Matematik Kejuruteraan. [Teaching Resource]

Nur Isa , Md Amin Teng (2010) A Microcontroller Based On Prayer Time Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izan Syahriah, Hussein (2010) Direct Metal Deposition Of Waspaloy Wire Using Laser And Arc Heat Sources. PhD thesis, University of Nottingham.

Nur Izan Syahriah, Hussein (2010) MMFU5023: Advanced Manufacturing Processes. [Teaching Resource]

Nur Izrin, Mahyon (2010) Aerodynamic Study Of Proton Exora Using Computational Fluid Dynamic (CFD) Fluent. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izyan, Abd Rahim (2010) Limit Vocab Data Selector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izzati , Ibrahim (2010) Electronic Patient Record Management System (E-PRMS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Izzati Nadiah, Ishak (2010) Simulation Of Active Power Filter Using Matlab/ Simulink. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Izzatul Suhana, Mohd Isa (2010) Design Of Microstrip Tri-Ring Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Nadia Yong, Abdullah (2010) Critical Success Factors In Technology Forecasting Activities. Masters thesis, UTeM.

Nur Rashid , Mat Nuri @ Md Din (2010) Numerical Simulation Of Aerodynamics Effect On An Automotive Side Mirror. Masters thesis, Universiti Teknologi Malaysia.

Nur Rifhan, Rosli (2010) The Effect Of Sintering Temperature And Clay Addition On Glass Ceramic Produced From Recycled Glass For Structural Application (CIP Method). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Sajidah , Abdullah (2010) Dental Charting Web. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nur Suzaini, Mahd Zaki (2010) Smart e-Pills Medication Reminder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syazana, Mohamed Sultan (2010) Design Of Low Noise Amplifier For Radio Over Fiber Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nur Syazana , Mohamed Sultan (2010) DMFD 3892: Prinsip Pengurusan (Principles Of Management). [Teaching Resource]

Nur Zahira , Mohd Azlan (2010) Sistem Maklumat Dan Pemarkahan Pelajar (SMPP). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nuralesya, Ramlee (2010) Productivity Improvement In Textile Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurazlina , Ibrahim (2010) Preliminary Study And Measurement Of Cutting Tool Coating Thickness By Using Alpha Thickness Gauging Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurbaiti, Abd Aziz (2010) Tunable Band Pass Filter Design By Using RF Switch. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurbazlina Awalludin , Ahmad (2010) Sekolah Menengah Kebangsaan Kerteh Portal. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurdiyana, Mohamed Ghazali (2010) Plate Dispenser Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhashima, Shafiee (2010) Sintering Characteristics Of Injection Moulded Components Using Waste Rubber Biopolymer. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhaziani, Hazemi (2010) Book Renewal Reminder via SMS For UTeM's Library. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurhidayah , Azmi (2010) RFID Based Door Access System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuridawati, Mustafa (2010) DITP 1113: Pengaturcaraan 1. [Teaching Resource]

Nurliyana, Hamsan (2010) Kitty Gamesplayer 2D Edutainment : Adventure Game. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurliyana , Mohd Nadzri (2010) Fluid And Heat Flow Performance In Heat Exchanger. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurmala Irdawaty, Hassan (2010) BENT 3313: Sistem Telekomunikasi. [Teaching Resource]

Nurmala Irdawaty, Hassan (2010) BENT 2123: Isyarat Dan Sistem. [Teaching Resource]

Nurul Ain, Sulaiman (2010) Simulation Study On IP-QoS Videoconferencing Performance Using Opnet Modeler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ain , Aminuddin (2010) Speech Recongnition To Text Application Via Pocket PC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Arbaeyah, Ahmad Yassin (2010) Application Of Relationship Chart Method In Facility Layout. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ashikin, Yusop (2010) Data Management And Data Visualization System At Jabatan Alam Sekitar Melaka On Petronas Penapisan Stack Emmision. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Asikin, Mohamad (2010) Thermal Cooling Of Computer Hardware. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Ayunni, Abdul Latif (2010) Production And Characterization Of Enviro-Recycled Wood Plastic Composites (ER-WPC) For The Structural Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Azma, Zakaria (2010) BITS 1313: Komunikasi Data Dan Rangkaian. [Teaching Resource]

Nurul Fariha , Othman (2010) Potential Application Of Tapioca Starch/Sugar Cane Fiber Cellulose Green Composite For Disposable Packaging Food Container. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafiza , Ab Ghani (2010) Productivity Improvement In Metal Industry : Work Study Improvement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Hafizah , Abdul Rahim (2010) Fish Feeder Controlled Via Sms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Husna , Abdul Razak (2010) An Intelligent Fish Feeder System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Izni, Johari (2010) The Implementation Of Risk Management In Metal Industry : Case Study 1 (Safety). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Mardhiah, Mohd Azizuddin (2010) An Investigation Of The Effect Of Retrogression And Reaging (RRA) Treatment On Stress Corrosion Cracking (SCC) Of Aluminum Alloy 7075. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Nurain, Dzulkifli (2010) Develop And Propose An Optimum Maintenance Schedule For A Critical Machine At Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Shairah, Hasna Merican (2010) Speech Recognition Using Radial Basis Function Neural Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Shuhadah , Johari (2010) E-Labtest System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurul Syahirah, Khalid (2010) Development Of Sonar Sensor System For Autonomous Underwater Vehicles (AUV) Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurul Wahida, Hanapiah (2010) Comparison Study Of Press Part Quality Inspection System: Checking Fixture And Faro Arm Laser Scanner. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulaida , Che Mat (2010) E-Facility For Politeknik Seberang Prai. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nurulhazwani, Jamalludin (2010) Fruit Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulhuda, Ahmad (2010) Development Of Automated Maynard Operation Sequence Technique (MOST) Work Study Technique : Case Study At Aerospace Manufacturing Company Using Lean Six Sigma. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nurulnaim , Mohd Aluwi (2010) Control Of Inverted Pendulum System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Nuur Farhana Shatilah , Zakaria (2010) E-Vehiclesticker System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Nuzulha Khilwani, Ibrahim (2010) BITI 1113: Kepintaran Buatan. [Teaching Resource]

Nuzulha Khilwani, Ibrahim (2010) BITI 1113: Kepintaran Buatan. [Teaching Resource]

O

Octivia, James (2010) Upgrading FMS 200 : Station 5 Using Human Machine Interface (HMI). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar, Abdullah (2010) Design Optimization On Power Train System For Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Omar , Rosli and Ahmad, Azhar and Sulaiman , Marizan (2010) Triplen Harmonics Mitigation 3 Phase Four-Wire Electrical Distribution System Using Wye- Zig-Zag Transformers. Journal of Emerging Trends in Engineering and Applied Sciences, 1 (1). pp. 72-78. ISSN 2141-7016

Ong , Jeremy Chun Chian (2010) Evaluation Of Surge Arrester Requirement For Overhead Transmission Line In Backflashover Analysis. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Ooi , Tai Ee (2010) UDP Utilization Monitoring System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Osman, M. and Chung, P. W. H. (2010) Feasibility study on mobile and communication technologies for language learning. In: International Conference on Mobile Learning, IADIS 2010, 19-21 March 2010, Porto, Portugal. (Submitted)

Othman, A. R and Hamidon, A. H, and Abdul Wasli. , C and Ting, J. T. H and Mustaffa, M. F (2010) High Gain Cascaded Low Noise Amplifier Using T Matching Network. In: 2010 Indonesia-Malaysia Microwave-Antennas Conference (IMMAC 2010), 11-12 june 2010, Depok Indonesia.

Othman, Abdul Rani and Hamidon, Abdul Hamid and Abdul Wasli, C and Mustaffa, M. F and Ting, J. T. H and Ibrahim, A. B (2010) Low Noise, High Gain RF Front End Receiver at 5.8GHz for WiMAX Application. JTEC, Vol. 2 (No. 2). pp. 43-53. ISSN 2180 - 1843

Othman , A. R and Hamidon , A. H and Abdul Wasli., C, and Ting, J. T. H, and Mustaffa , M. F (2010) 5.8 GHz Radio Frequency Amplifier with 3 dB Π Network Attenuator. In: 2010 Indonesia-Malaysia Microwave-Antennas Conference (IMMAC 2010), 11-12 June 2010, Depok Indonesia.

Othman , A. R, and Hamidon, A. H and Wasli , C and Mustaffa , M. F and Ting, J. T. H (2010) Modeling of Indoor Wave Propagation Models from 1 G Hz to 10 G Hz. In: 4th International Symposium On Broadband Communication. ISBC 2010, 11 July 2010, Melaka.

Othman , A. R and Hamidon , A. H and Abdul Wasli. , C and Ting , J. T. H and Mustaffa , M. F and Ibrahim , A.B (2010) High Gain Cascaded Low Noise Amplifier using T – Matching Network. JTEC, Vol. 2 (No. 1). pp. 63-69. ISSN 2180 - 1843

Othman A. R,, Othman A. R, and Hamidon A. H, Hamidon A. H and C Wasli, C Wasli and Mustaffa M. F, Mustaffa M. F (2010) RF Front End Receiver for WiMAX Application. In: 2010 Indonesia-Malaysia Microwave-Antennas Conference (IMMAC 2010), 11-12 June 2010, Depok Indonesia.

P

P. Rajandran, Peresamy (2010) Modeling effective multimedia technology based learning for management undergraduates. PhD thesis, UTeM.

Peh, Thai Ee, Perly and Choo, Yun Huoy and M.A., Burhanuddin (2010) The Intelligent Vacation Planner System using Ant Colony Optimization. In: 2010 International Conference on Computer and Computational Intelligence (ICCCI 2010), 25-26 December, 2010, Nanning, China.

Phang, Chee Kong (2010) Mechanical And Thermal Properties Of Intermetallic NiAl For Automotive Body Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Phongsakorn, Prak Tom (2010) The Effect Of Alkalization Treatment On The Mechanical Properties And Water Absorption Of Kenaf/Polyester Biocomposites. Masters thesis, UTeM.

Phuman Singh, A.S. and Safarudin, Mochamad and Sihombing, Haeryip (2010) Rollover Prevention System for Passenger Vehicle. In: International Conference on Design and Concurrent Engineering 2010, 20-21 September 2013, Universiti Teknikal Malaysia Melaka (UTeM), Melaka.

Pichaiyan Subramaniam Kavitha , . (2010) Image Clustering : Comparison Of Two Color Segmentation Techniques. Masters thesis, UTeM.

Poh, Mei Mei (2010) E-Trade System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Poon, Yen Mei (2010) 3D Animation On Dental Care For Children. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Pratama, S. F. and Muda, A. K. and Yun-Huoy, C. (2010) Feature Selection Methods for Writer Identification: A Comparative Study. In: IEEE International Conference on Computer and Computational Intelligence (ICCCI 2010), 25 - 26 December, 2010, Nanning, China.

Putra, Azma (2010) Sound radiation from rectangular baffled and unbaffled plates. Applied Acoustics, 71. pp. 1113-1125. ISSN 0003-682X

Putra, Azma (2010) THE CONTRIBUTION OF MOMENT EXCITATION ON THE UNCERTAINTY IN THE VIBRATION INPUT POWER TO A STRUCTURE. In: 3rd Regional Conference on Noise, Vibration and Comfort (NVC) 2010, 28-30th June, 2010, Putra Jaya, Malaysia.

Putra, Azma (2010) Sound radiation from perforated plates. Journal of Sound and Vibration, 329. pp. 4227-4250. ISSN 0022-460X

Puvanasvaran, A. Perumal (2010) BMFP 4523: Lean Manufacturing. [Teaching Resource]

Puvanasvaran, A. Perumal and Mohd Razali, Muhamad and Hasoloan Haery, Ian Pieter and Mohd Kamil, Sued (2010) Sustaining Quality System By Adopting Lean Thinking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Q

Qumrul, Ahsan (2010) BMFB 3243: Polimer Kejuruteraan (Engineering Polymer). [Teaching Resource]

R

Rabiatul Adibah , Abdul Rahim (2010) Design And Analysis Of Autoclave Mould For Carbon Reinforced Spoiler. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Radin Md Firdaus, Radin Mohd Ali (2010) Interactive Robot Using Speech Recognition System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Radzai, Said (2010) BMCS 4353: Mekanik Pepejal III. [Teaching Resource]

Rafeqah, Abd Ghani (2010) The Study Of Heat Radiation In Flare Systems Application In The Oil, Gas And Petrochemical Industry. Project Report. UTeM, Melaka Malaysia. (Submitted)

Rafidah, Hasan and Mines, R.A.W. and Shen, E. and Tsopanos, S. and Cantwell, W.J. and Brooks, W. and Sutcliffe, C.J. (2010) Comparison of the Drop Weight Impact Performance of Sandwich Panels with Aluminium Honeycomb and Titanium Alloy Micro Lattice Cores. Applied Mechanics and Materials, 24. pp. 413-418. ISSN 16609336

Rafizi , Abdullah (2010) E-Office Web Community Via Sms. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahifa , Ranom (2010) DACS 2212: Matematik Kejuruteraan. [Teaching Resource]

Rahifa , Ranom (2010) DEKA 1212: Aljabar. [Teaching Resource]

Rahim, Sarni Suhaila (2010) BITP 1123: Struktur Data & Algoritma. [Teaching Resource]

Rahmah Iznillah , Abd.Malik (2010) 10 Way Infra Red Remote Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rahmat, Mohd Fua'ad and Md. Rozali, Sahazati and Abdul Wahab, Norhaliza and Has, Zulfatman (2010) APPLICATION OF DRAW WIRE SENSOR IN POSITION TRACKING OF ELECTRO HYDRAULIC ACTUATOR SYSTEM. INTERNATIONAL JOURNAL ON SMART SENSING AND INTELLIGENT SYSTEMS, 3 (4). pp. 736-755. ISSN 1178-5608

Rahmat, Mohd Fua'ad and Isa, Md Daud and Jusoff, Kamaruzaman and Hussin, T.A. and Md Rozali, Sahazati (2010) Image Reconstruction Algorithm for Electrical Charge Tomography System. American Journal of Applied Sciences, 7 (9). pp. 1254-1263. ISSN 1546-9239

Rahmat, Mohd Fua'ad and Md Rozali, Sahazati and Abdul Wahab, Norhaliza and Has, Zulfatman and Jusoff, Kamaruzaman (2010) Modeling and Controller Design of an Electro-Hydraulic Actuator System. American Journal of Applied Sciences, 7 (8). pp. 1100-1108. ISSN 1546-9239

Raihan, Othman (2010) Monitoring Critical Heart Patient Through SMS Medication Reminder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Fazly Nizam, Raja Azman (2010) Simulation And Development Of RF Switch On Microstrip Printed Circuit Board For WiMAX Application At 2.4GHz. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raja Rahman, Raja Roslan and Burhanuddin, M. A. and Burhanuddin , Mohd Aboobaider (2010) Information and communication technology: competence among academic staff in achieving high job performance at higher learning institutions in Melaka. Technical Report. Mary Martin, National Library.

Raja Rahman, Raja Roslan and Din, Abdul Talib and Jamaludin , Azahari and Yusof, Tajuldin (2010) DEVELOPING ENTREPRENEURIAL LEADERSHIP STYLES IN IMPROVING SMIs MANUFACTURING BUMIPUTERA TECHNOPRENEURS PERFORMANCE IN MELAKA. Academy of Taiwan Business Management Review, 58 (2). pp. 52-61. ISSN 1813-0534

Ramani, Anis Niza and Baharin, Kyairul Azmi (2010) Transmission Losses Allocation in Deregulation Electricity Market. In: IEEE International Conference on Power and Energy (PEcon2010), 29 Nov - 1 Dec 2010, Kuala Lumpur.

Randy Afandi , Wahed (2010) Helmet Digital Speed Measurement Display With Alarm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ranjit Singh, Sarban Singh and Sani Irwan, Md Salim and Siva Kumar, Subramaniam (2010) Hexagon-Diamond Grid System for Motion Tracking. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rashidah , Mohd Deraman (2010) Analysis And Simulation Of Lightning Backflashover For 132kv Transmission Line Using PSCAD. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Rasin, Zulhani and Ramani, Anis Niza and Jamaluddin, Muhamed Herman (2010) BENG 2413: Prinsip Perhubungan. [Teaching Resource]

Rasin, Zulhani (2010) BEKC 3633: Sistem Perhubungan. [Teaching Resource]

Rasrastara, Fauzi Adi (2010) Constructing polymorphic virus analysis system using behavior detection approach. Masters thesis, UTeM.

Ratha Krishnan , Vicknes (2010) Distributed Wireless Sensor Network Deployment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Raven, Lachimanan (2010) The Evaluation Study Of Noise And Vibration In Flexible Wiper System Using Analytical Method. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Razali, Sazalinsyah and Meng, Qinggang and Yang, Shuang-Hua (2010) A Refined Immune Systems Inspired Model for Multi-Robot Shepherding. In: Second World Congress on Nature and Biologically Inspired Computing (NaBIC 2010), 15-17 December 2010, Kitakyushu, Japan.

Razali, Sazalinsyah and Meng, Qinggang and Yang, Shuang-Hua (2010) Shepherding: An Immune-Inspired Robotics Approach. In: First UK-Malaysia-Ireland Engineering & Science Conference (UMIES 2010), 23-25 June 2010, Belfast, UK.

Reduan, Mat Dan (2010) BMCD 4543: Keboleharapan Dan Kualiti Rekabentuk. [Teaching Resource]

Reduan, Mat Dan (2010) DMCS 3333: Mekanik Pepejal II. [Teaching Resource]

Redzuan, Abdul Manap (2010) BENT 3113: Prinsip Perhubungan. [Teaching Resource]

Redzuan, Abdul Manap and Wasli, Chairulsyah and Imran, Mohd Ibrahim (2010) BENT 3113: Prinsip Perhubungan. [Teaching Resource]

Ridlwan, Habibi (2010) Moving Objects Database For Gis-Based Emergency Response System. Masters thesis, UTeM.

Ridza Azri, Ramlee (2010) BENG 1113: Prinsip Elektrik & Elektronik. [Teaching Resource]

Ridza Azri, Ramlee and Siti Huzaimah, Husin and Khairul Azha, A. Aziz and Hairulizam, Md. Dom (2010) Security Tele - Robot (STR). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rishwaraj, Gengarajoo (2010) Statistical Approach In Response Prediction. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rohimah Hanah , Mohd Zain (2010) Service Management System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Roslan, Nor Effyza (2010) Design And Develop TES Split Unit Of Air Conditioning System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosleen, Abdul Samad (2010) BITP 2303: Pengaturcaraan Pangkalan Data. [Teaching Resource]

Rosleen, Abdul Samad (2010) DITP 1323: Asas Pengaturcaraan Pangkalan Data. [Teaching Resource]

Rosmaizatul Azma , A. Rahman (2010) Ticket System For MARA Liner Using SMS. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosman, Abd Rahim (2010) DENC 1112: Aplikasi Perisian. [Teaching Resource]

Rosman, Abd Rahim (2010) DENG 2113: Mikropemproses. [Teaching Resource]

Rosman, Zamri (2010) Development And Evaluation Of Interactive SPC Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rosmiza Wahida, Abdullah (2010) DITP 3213: Kejuruteraan Perisian. [Teaching Resource]

Rostam Affendi, Hamzah (2010) DENG 1113: Asas Elektronik Dan Mikropemproses. [Teaching Resource]

Roszaidi, Ramlan (2010) BMCM 2713: Dinamik. [Teaching Resource]

Rozeana, Abd Rahman (2010) Vision System Based Height Measuring Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ruhilhayati, Mahamad (2010) Smart Home Security System Using Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Rusnandi, Herdy (2010) BMCM 2723: Mekanik Mesin. [Teaching Resource]

Rusnandi, Herdy (2010) BMCM 2723: Mekanik Mesin. [Teaching Resource]

Rusnandi, Herdy (2010) DMCM 3723: Mekanik Mesin. [Teaching Resource]

Rusyidah, Shuaib (2010) Online Color Blind Screening Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

S

S. Thiru, Chitrambalam (2010) BMCN 4533: Kejuruteraan Berbantukan Komputer. [Teaching Resource]

S.THIRU,, CHITRAMBALAM (2010) Effect of Lead Addition in LM6 Alloy Castings. Indian Foundry Journal, 56 (10). pp. 38-42. ISSN 0379-5446

S.THIRU,, CHITRAMBALAM (2010) Rheocasting and Thixocasting: Semi-Solid Casting Technologies. Indian Foundry Journal, 56 (8). pp. 23-27. ISSN 0379 5446

S.Thiru, chitrambalam and Chew , Lai Huat and Phang , Boo Onn and Hemavathi, Sundaram and Imran , Syakir Mohammad and Shafizal , bin Mat (2010) An Investigation on Relationship between Process Control Parameters and Weld Penetration for Robotic CO2 Arc Welding using Factorial Design Approach. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET). ISSN 2180-1053 (In Press)

Saaya, Zurina and Roslan, Irda and Ramly, Marliza (2010) Resource Aware Application for Mobile Device In An Ad Hoc Wireless Network Environment. In: The 2nd International Conference on Engineering and ICT (ICEI 2010), 18-20 February 2010, Holiday Inn, Melaka.

Safarudin, Mochamad (2010) BMCC 3743: Pengukuran Dan Instrumentasi. [Teaching Resource]

Safarudin Gazali, Herawan and Khisbullah, Hudha and Muhamad Syamsul, Hadi (2010) Study and development of LPG vehicle using carbon adsorbent in fuel tank for increasing storage capacity. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safarudin Gazali, Herawan and Mohd Zaid, Akop and Suhaimi, Misha (2010) Development of Low Power Split Unit Air Conditioning by Using Thermal Energy Storage System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Safei, Su'aidi (2010) BLHW 1722, Falsafah Sains dan Teknologi. [Teaching Resource]

Safei, Su'aidi (2010) Facebook for BLHW 1722, Falsafah Sains dan Teknologi. [Teaching Resource]

Sahbudin, Saari and Hanim, Abdul Razak and Mardiana, Bidin and Haroon, Hazura and Menon, P.S (2010) Modeling And Analysis Of Lateral Doping Region Translation Variation On Optical Modulator Performance. In: THE 4TH ASIAN PHYSICS SYMPOSIUM—AN INTERNATIONAL SYMPOSIUM, 12-13 Oktober, Bandung, Indonesia.

Saifol Anuar , Ahmad (2010) Study On The Effect Of The Design Of Machining Parameter On Surface Roughness Of The Aluminum Alloy 7075 Using Design Of Experiment (DOE). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saifudin Hafiz, Yahaya (2010) BACS 2222: Kaedah Berangka. [Teaching Resource]

Saifudin Hafiz, Yahaya (2010) DACS 1222: Kalkulus. [Teaching Resource]

Saifudin Hafiz, Yayaha (2010) BMFM 2223: Kaedah Berangka & Matrik Al-Jabar. [Teaching Resource]

Saiful Ammar, Nasrudin (2010) Flood Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Azhar, Che Pa (2010) Design And Development Of The Tricycle For Agriculture Sector. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saiful Nizam , Sa'ari (2010) Modification Of Copper Rod To Reduce Ground Resistance. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Sakidin, Hamzah and Tay, Choo Chuan (2010) THE EFFECT OF MODIFIED UNBABC MAPPING FUNCTION ON THE IMPROVEMENT OF GLOBAL POSITIONING SYSTEM TROPOSPHERIC DELAY. Journal of Engineering and Technology, 1 (1). pp. 129-136. ISSN 2180-3811

Sakidin, Hamzah and Tay, Choo Chuan (2010) Simpler UNBabc Mapping Function for Global Positioning System (GPS) Tropospheric Delay. In: The 2nd International Conference on Engineering and ICT,2010, Melaka, Malaysia, 18-20 February, 2010, Holiday Inn, Melaka, Malaysia.

Sakidin, Hamzah and Tay, Choo Chuan (2010) ALTERNATIVE UNBabc MAPPING FUNCTION FOR TROPOSPHERIC DELAY. In: SKASM 2010, 8-10 December 2010, Johor Bahru, Johor.

Sakidin, Hamzah and Tay, Choo Chuan (2010) Simplification of Mapping Function For Global Positioning System (GPS)Tropospheric Delay. In: RCAEM 2012, 2012, Kuala Lumpur.

Salim, Norhafiz (2010) BEKU 2233: Litar Elektrik II. [Teaching Resource]

Salleh, Aboo Hassan (2010) DMFD 2323: Proses Pembuatan (Manufacturing Process). [Teaching Resource]

Salmie Suhana, Saad (2010) Design And Analysis Of Turbocharger By Casting Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Samsudin, Abdul Rahim (2010) DMFD 2113: Rekabentuk Mesin (Machine Design). [Teaching Resource]

Samsudin, Abdul Rahim and Hambali, A and Marjom, Zolkarnain and Sivarao, Subramonian and Khairul, A A R (2010) Optimization Design of a Portable Hose Reel Using Integrated Approach. International Conference on Design and Concurrent Engineering. pp. 530-533. ISSN 983-2948-84-1

Samuel, Tang Kah Hung (2010) Literature Study On Impact Energy Absorption (IEA) Devices. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Saptari, Adi (2010) MMFD5033: Management Of Global Manufacturing Operations. [Teaching Resource]

Sarah Fatihah, Shahrin (2010) Pengoptimuman Sistem Nozel Sedia Ada Pada Mesin Pemadam Api Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sarah Nadiah, Mohd Ghazali (2010) The Study Of Magnetic Dial Gauge Precision Ability On Wafer Biscuits Thickness Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sardi, Junainah and Sulaiman , Marizan and Ibrahim, Khairul Anwar (2010) BEKP 2443: Pengantar Kejuruteraan Kuasa. [Teaching Resource]

Sarni Suhaila, Rahim (2010) DITM 2113: Sistem Multimedia. [Teaching Resource]

Saufidatul Ailin , Rusli (2010) Industrial Training System (IND-TRAIN). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Saw, Chia Fung (2010) House Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sazelin, Arif and Ridzwan, Ahmad (2010) APPLICATION OF THE CONCEPT OF HALAL AND TAYYIB IN HALAL FOOD CERTIFICATION STANDARDS: POSITIONING MALAYSIA AS A ROLE MODEL. In: 1st AIB-MENA Conference, 10-12 December 2010, Dubai UAE. (Submitted)

Sazuan Nazrah, Mohd. Azam (2010) Practical Modeling of Heat Exchanger Pilot Plant and Advanced Control Studies. Masters thesis, Universiti Teknologi Petronas.

See, Thiong Zhou (2010) Design And Improvement Of Hydraulic System For Fire Fighting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sek, Yong Wee (2010) BACS 2213: Statistik & Kebarangkalian. [Teaching Resource]

Sek, Yong Wee (2010) DACS 2213: Statistik & Kebarangkalian. [Teaching Resource]

Selamat, S. R. and Yusof, R. and Sahib, S. and Mas'ud, M. Z. and Roslan, I. and Abdollah, M. F. (2010) SCENARIO BASED WORM TRACE PATTERN IDENTIFICATION TECHNIQUE. (IJCSIS) International Journal of Computer Science and Information Security, 7 (1). pp. 1-9. ISSN 1947-5500

Selamat, S. R. and Yusof, R. and Sahib, S. and Mas'ud, Z. and Abdollah, M. F. and Zainal Abidin, Z. (2010) Advanced Trace Pattern For Computer Intrusion Discovery. Journal of Computing, 2 (6). pp. 200-2007. ISSN 2151-9617

Selamat, Siti Rahayu and Yusof, Robiah and Sahib, Shahrin and Mas'ud, Mohd Zaki and Abdollah, Mohd Faizal and Zainal Abidin, Zaheera (2010) Advanced trace pattern for computer intrusion discovery. Journal of Computing, 2 (6). pp. 200-207. ISSN 2151-9617

Seri Nurbaiti , Shariffuddin (2010) Influence Of Cutting Parameter On Chip Thickness Of Turning Operation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafizal, Mat and Faizil, Wasbari and Mohd Firdaus, Sukri (2010) The Effect of Lean NOx TRAP (LNT) Catalyst On ON2 Removal From Diesel Exhaust Engine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shafizal, Mat (2010) BMCD 3523: Rekabentuk Komponen Mesin. [Teaching Resource]

Shafizal, Mat (2010) DMCD 3523: Rekabentuk Kejuruteraan. [Teaching Resource]

Shafizal , Hassan (2010) Automated Intelligent Drawer Or Locker Security System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shah Irwan, Malek (2010) Optimization Of Turning Process Of Thin Wall Cylinder. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahbodin, F. and Badioze Zaman, H. (2010) PENGGUNAAN PAKEJ MULTIMEDIA C2HADAM MENGGUNAKAN PENDEKATAN PBL BAGI KURSUS SAINS. In: Pembangunan dan Penilaian Perisian Kursus Multimedia. Penerbit UPM, UPM, pp. 53-74. ISBN 978-967-344-177-8

Shahbodin, F. and Bakar, N. (2010) Problem solving steps in online PBL. In: 4th International Symposium on IT, 15-17 JUNE 2010, KL, MALAYSIA.

Shahdan, Md. Lani (2010) BITP 3233: Perancangan Strategik Sistem Maklumat. [Teaching Resource]

Shahdan, Md. Lani (2010) DITP 2213: Analisa dan Reka Bentuk Sistem. [Teaching Resource]

Shahlina , Hashim (2010) Online Booking Car Purchasing System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahril, Parumo (2010) BITM 2113: Pembangunan Aplikasi Web. [Teaching Resource]

Shahrir, Sahari (2010) Mechanical Properties Determination Of Mild Steel And Stainless Steel Joint Fabricated By MIG Welding Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shahrudin , Zakaria (2010) BEKM 2543: Pengantar Sistem Mekatronik. [Teaching Resource]

Shahrudin , Zakaria (2010) BEKM 4573: Rekabentuk Sistem Mekatronik. [Teaching Resource]

Shahrul Izzat , Hamid (2010) Experimental Validation Of Aftermarket Fuel Saving Device (Air Boom). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Shaifatul Shima, Shaari (2010) Analysis On Bicycle Crank Arm Using Tensile Test. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sharatul Izah, Samsudin and Siti Huzaimah, Husin and Zulkifli, Shariff (2010) BENE 1133: Prinsip Elektrik. [Teaching Resource]

Shariman, Abdullah (2010) BMFA 3443: Automasi Industri (Industrial Automation). [Teaching Resource]

Shariman, Abdullah (2010) DMFD 3463: Robotik Dan Automasi (Robotics and Automation). [Teaching Resource]

Sharon Anthony , Jimbangan (2010) UTeM Customer Feedback System (UCFS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siow , Chan Hoel (2010) Implementation Of Diamond Search (DS) Algorithm For Motion Estimation Using MATLAB Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Aisah, Mat Junos @ Yunus and Norhidayah, Mohamad Yatim and Muzalifah, Mohd Said and Zul Atfyi Fauzan, Mohamed Napiah (2010) BENM 1143: Litar Logik. [Teaching Resource]

Siti Aisyah, Anas (2010) Image Processing Using DCT And Wavelet. PhD thesis, Universiti Kebangsaan Malaysia.

Siti Aminah, Mohd Subari (2010) Study On Shock Absorbing Properties Of Aluminium Circular Tube. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Faizah , Mad Asasaari (2010) Effect Of Chromium Carbide (Cr23C6) Formation On Microstructure And Corrosion Passivity Behavior Of AISI 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Fatimah, Sulaiman (2010) DENE 3263: Elektronik Industri. [Teaching Resource]

Siti Hajar, Hashim (2010) Development Of Automated Test System For Electronics Measurement. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Hawa , Abd Mutalif (2010) Grading system for SMK Dato Dol Said. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Huzaimah, Husin (2010) DENE 3363: Automasi Industri. [Teaching Resource]

Siti Khadhijah , Mohamad (2010) An Investigation Of Fracture Toughness On Heat Treated Aluminum Alloy 7075 With Effect Of Corrosion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Mastura, Baharudin (2010) BITP 1323: Pangkalan Data. [Teaching Resource]

Siti Musliza, Jalal (2010) UTeM's Event Alert System (UTeMEAS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nadrah, Selamat (2010) Smart Color Sorting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nadrah , Selamat (2010) Smart Color Sorting Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Noor Azrin , Sukiran (2010) Design And Fabricate Of Pneumatic Punching Tool. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nor Ain, Mat Zin (2010) Parking Control System Using PLC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Normi, Zabri @ Suhaimi (2010) BENT 1123: Analisis Litar Elektrik. [Teaching Resource]

Siti Normi, Zabri @ Suhaimi (2010) DENE 1122: Pengukuran. [Teaching Resource]

Siti Norsarah , Abdul Rashid (2010) Vision System Based Product Sorting Machine. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Nadiah, SK Abdul Aziz (2010) Stand Alone Power Light System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Nur Sazana , Mohd Ayob (2010) 3D Animation Advertisement 'Non-Smoking Campaign'. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Nurfairuz , Tajuddin (2010) Feedrates Optimization In Ball End Milling Of Alluminum Alloy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Rahmah, Shamsuri (2010) DMFM 1212: Matematik Asas (Fundamental Mathematics). [Teaching Resource]

Siti Rashidah, Misrohim (2010) Implementation Of Network Rendering Farm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Salwany, Abu Hasan (2010) Effect Of Risk Husk Reinforcement To The Properties Of Polyester Bio Composite For Roofing Product. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Siti Suzana , Ahmad Kamri (2010) Design And Implementation Of Ofthogonal Frequency Division Multiplexing Transmitter. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Syatirah , Rofiee (2010) Help Desk System (HDS) For ICT Asset. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Siti Yuszaini , Muhamad Hamzah and Badrul Hisham , Ahmad and Peng Wen, Wong (2010) MULTIBAND MATCHED BANDSTOP FILTER. In: 2010 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE 2010), 9-11 November 2010, Port Dickson, Negeri Sembilan.

Siva Kumar, Subramaniam and Siti Aisyah, Anas and Mohamad Kadim, Suaidi and Abu Bakar, Mohamad Diah and Abdul Hamid, Hamidon (2010) Flood Observatory System (FOS). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivakumar, Dhar Malingam (2010) FORMING ANALYSIS OF METAL-COMPOSITE SANDWICH STRUCTURES. In: 14TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 7-10 June 2010, Budapest, Hungary.

Sivakumar, Dhar Malingam (2010) Stretch Forming Studies on Thermoplastic Composite. In: 6th Australasian Congress on Applied Mechanics, ACAM 6 , 12-15 December 2010, Perth, Australia.

Sivakumar, Dhar Malingam (2010) A study on the forming analysis of a self-reinforced polypropylene based composite-aluminium hybrid structures. In: 6th Australasian Congress on Applied Mechanics, ACAM 6 , 12-15 December 2010, Perth, Australia.

Sivarao, Subramonian and Taufik, , and Khairol Anuar, Rakiman and Lokman , Abdullah and Mohd Shahir, Kassim and Mohd Amri, Sulaiman (2010) Engineering of Mechanical Control Kit for Unmanned Grass Cutter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sivarao, Subramonian (2010) BMFG 4812: Jurutera Dalam Masyarakat (Engineer In Society). [Teaching Resource]

Sivarao, Subramonian (2010) Characterization Of Calcium Carbonate Particulated Polyethylene. LA Publishing, Germany. ISBN 978-3-8433-8630-2

Sivarao, Subramonian (2010) Design and Development of Unmanned Grass Cutter. LA Publishing, Germany. ISBN 978-3-8433-5267-3

Sivarao, Subramonian (2010) Modeling of Laser Materials Processing by Artificial Neural Network Modeling and Experimental Validation. VDM Publishing, Mauritius. ISBN 978-3-639-31529-5

Sivarao, Subramonian (2010) Quality and Performance Analysis of CO2 Laser machining - A Complete Guide For Laser Machining Experimentation and Cut Edge Quality Evaluation. LA Publishing. ISBN 978-3-8433-8162-8

Sivarao, Subramonian (2010) Tire Inflation Technology; Existing and Evolution To Be Advancements in Tyre Inflating Technology. LA Publishing, Germany. ISBN 978-3-8383-8502-0

Sivarao, Subramonian and Ammar, Abd Rahman and T., Joseph Sahaya Anand and Salleh, Mohd Shukor (2010) Stochastic Modeling and Optimization of Laser Machining by Response Surface Methodology. International Journal of Engineering & Technology, 10 (04). pp. 13-21. ISSN 2077-1185

Sivarao, Subramonian and Fairuz, Dimin and T., Joseph Sahaya Anand and Jamil, Ridzuan and Ahmad , Kamely (2010) Surface Quality Investigation of Al 6061-T6511 Using TiAlN Coated Milling Tool. International Journal of Basic & Applied Sciences, 10 (4). pp. 55-59. ISSN 2077-1223

Sivarao, Subramonian and Fairuz, Dimin and T. , Joseph Sahaya Anand and Ahmad, Kamely (2010) Investigation of Tangential Force, Horsepower and Material Removal Rate Associating HAAS CNC Milling, Al6061-T6511 Work Material & TiAlN Coated End Mill Tool. International Journal of Basic & Applied Sciences, 10 (4). pp. 23-28. ISSN ISSN: 2077-1223

Sivarao, Subramonian and Nur, Izan and T., Joseph Sahaya Anand and Fairuz, Dimin (2010) Investigation of Chemical Composition on Widely Used Al 6061-T6511 Engineered Material: An XRD Analysis Towards Improvement of Mechanical Properties. International Journal of Basic & Applied Sciences, 10 (4). pp. 1-6. ISSN 2077-1223

Sivarao, Subramonian and Salleh, Mohd Shukor and T., Joseph Sahaya Anand and Abd Rahman, Ammar (2010) DOE Based Statistical Approaches in Modeling of Laser Processing – Review & Suggestion. International Journal of Engineering & Technology IJET-IJENS. pp. 1-8. ISSN 2077-1185

Sivarao, Subramonian and Siva Kumar, Subramaniam and Mazran , Esro and T., Joseph Sahaya Anand (2010) Electrical & Mechanical Fault Alert Traffic Light System Using Wireless Technology. International Journal of Mechanical and Mechatronics Engineering, 10 (4). pp. 19-22. ISSN 2077-124X

Sivarao, Subramonian and T., Joseph Sahaya Anand and Abd Rahman, Ammar and Salleh, Mohd Shukor (2010) RSM Based Modeling for Surface Roughness Prediction in Laser Machining. International Journal of Engineering & Technology, 10 (4). pp. 32-39. ISSN 2077-1185

Sivarao, Subramonian and T., Joseph Sahaya Anand and Hanizam, Hashim and Indra , Devi (2010) Conceptual Designs towards Developing Mechanically Controlled Semi-Automated Grass Cutter. International Journal of Mechanical and Mechatronics Engineering, 10 (4). pp. 29-33. ISSN 2077-124X

Sivarao, Subramonian and T.J.S, Anand and Ariff, Hambali and Minhat, Mohamad and Azni, Faizul (2010) Review of Automated Machines towards Devising A New Approach in Developing Semi-Automated Grass Cutter. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol: 10 No: 04, 10 (4).

Sobah, Periasamy (2010) Estimation technique for software project planning. Masters thesis, UTeM.

Sofian , Abd Samad (2010) Development Of Database System For Automated Storage Retrieval System Using RFID Technology. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Soong , Hoong Cheng (2010) PDF digital watermarking : grayscale photocopy detection of printed documents. Masters thesis, UTeM.

Subramaniam, Siva Kumar and Gannapathy, Vigneswara Rao and Sivarao, Subramonian and Abdul Hamid, Hamidon (2010) Flood level indicator and risk warning system for remote location monitoring using Flood Observatory System. WSEAS Transactions on SYSTEMS and Control, 5 (3). pp. 153-163. ISSN 1991-8763

Sudin, Mohd Nizam (2010) THE ROLE OF A SPECIFICATION IN THE DESIGN PROCESS: A CASE STUDY. In: INTERNATIONAL DESIGN CONFERENCE - DESIGN 2010, 17-20 May 2010, Dubrovnik - Croatia.

Sudirman, R and Chee, A.K and Daud, W.B (2010) Modeling Of EEG Signal Sound Frequency Characteristic Using Time Frequency Analysis. Mathematical/Analytical Modelling and Computer Simulation (AMS). pp. 221-226. ISSN 978-1-4244-7196-6

Sugumar, Dharmalingam (2010) BMFG 1823: Statik Dan Kekuatan Bahan (Static And Strengh Of Materials). [Teaching Resource]

Suhadilla, Zainal (2010) Vision System Based Rust (Reject) Detection. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaila, Mat Said (2010) Modeling Study Of A Gas Turbine Burner Cooling Ring Efficiency In A Model Combuster Exit Duct. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Suhaimi, Basrah (2010) BITS 3333: Rangkaian Multimedia. [Teaching Resource]

Suhaimi, Basrah (2010) BITS 3333: Rangkaian Multimedia. [Teaching Resource]

Suhaimi, Basrah (2010) MITS5313: Advanced Data Communication And Networks. [Teaching Resource]

Suhaimi, Misha (2010) BMCF 4243: Sistem Hidraulik Dan Pneumatik. [Teaching Resource]

Suhaimi, Misha (2010) DMCF 3243: Sistem Hidraulik Dan Pneumatik. [Teaching Resource]

Suhaimi, Misha and Herawan, Safarudin Gazali and Md Daud, Nazri (2010) THE USAGE OF SOLAR ENERGY TO REDUCE HOT TEMPERATURE IN THE CAR. In: Seminar Kebangsaan Aplikasi Sains dan Matematik 2010 (SKASM 2010) : sempena Simposium Kebangsaan Sains Matematik ke 18 (SKSM 18), 8 - 10 December 2010, Johor Baharu.

Sukrulnizam , Ismail (2010) PIC Based Fiber Optic Pressure Sensor. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman, Sabikan (2010) Design And Develop Wireless Based Control Of Industrial Robotics. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Sulaiman , Marizan and Mohd Shah, Hairol Nizam and Lim , Wee Teck (2010) Shape-Based Matching: Defect Inspection of lue Process in Vision System. In: IEEE Symposium on Industrial Electronics and Applications 2011, 25-28 September 2011, Langkawi.

Sulaiman , Sabikan (2010) DEKP 2643: Teknologi Elektrik. [Teaching Resource]

Sulong, Muhammad Suhaizan and Abdul-Aziz, Azlianor and Wongsim, Manirath (2010) Modelling the Quality Aspects of Internet Commerce with Customers’ Shopping Experiences. In: 2nd International Conference on Computer Engineering and Technology (ICCET), 16-18 Apr 2010, Chengdu, China.

Suresh, Kumar and Sivarao, Subramonian and Cheong, MT and Fuaida, Harun (2010) Solving Eventual Bonding Quality to Enhance Adhesion For QFN Packages. 34th International Electronic Manufacturing Technology Conference, 2010. pp. 1-6. ISSN 1089-8190

Suresh, Kumar and Sivarao, Subramonian and Guan, Tan Kim and Harun, Fuaida (2010) Influence of Wafer Probing Against Initial Bonding. 34th International Electronic Manufacturing Technology Conference, 2010. pp. 1-8. ISSN 1089-8190

Sutikno, Tole and Jidin, Auzani and Basar, Mohd Farriz (2010) Simple Realization of 5-Segment Discontinuous SVPWM Based on FPGA. International Journal of Computer and Electrical Engineering, 2 (1). pp. 148-157. ISSN 1793-8198

Sutikno, Tole and Jidin, Auzani and Nik Idris, Nik Rumzi (2010) New approach FPGA-based implementation of discontinuous SVPWM. Turkish Journal of Electrical Engineering and Computer Sciences, 18 (4). pp. 499-514. ISSN 1300-0632

Sutikno, Tole and Jidin, Auzani and Wong, Jenn Hwa and Nik Idris, Nik Rumzi (2010) A Simple Approach of Space-vector Pulse Width Modulation Realization Based on Field Programmable Gate Array. Electric Power Components and Systems, 38. pp. 1546-1557. ISSN 1532-5008

Suzi Iryanti, Fadilah (2010) A Comparative Analysis Of QoS For Data Transmission Over Wirelees Network. Masters thesis, UTeM.

Suziana , Ahmad (2010) DEKC 3433: Kejuruteraan Perhubungan. [Teaching Resource]

Syahira , Ali (2010) Dimensional Accuracy Of Hole On Irregular Surface Geometry As A Result Of Machining Process (A Doe Approach). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syahrul Hisham, Mohamad (2010) DEKG 2113: Prinsip Elektrik Dan Elektronik. [Teaching Resource]

Syahrul Hisham , Mohamad (2010) DEKM 3753: Mesin Elektrik. [Teaching Resource]

Syamimi, Shamsuddin (2010) BMFA 2413: Sistem Kawalan (Control System). [Teaching Resource]

Syamsul Amri , Mohamad (2010) Automatic Fertigation Control System Using PIC. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syaqayum Zaiman, Abd Rahman (2010) Application Of Value Stream Mapping (VSM) In Manufacturing Industry. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syariffanor, Hisham (2010) BITM 2313: Interaksi Komputer- Manusia. [Teaching Resource]

Syarulnaziah, Anawar (2010) BITS 1123: Organisasi Dan Senibina Komputer. [Teaching Resource]

Syarulnaziah, Anawar (2010) BITS 1313: Komunikasi Data Dan Rangkaian. [Teaching Resource]

Syazana, Sapie (2010) Half Car Active Suspension System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syazana Basyirah , Mohammad Zaki (2010) Design Of Tulip And Hibiscus Antenna. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Eddy Afifi, Syed Abdullah (2010) Comparative Study Of Ideal Engine Test Cell System At Proton As Compared To FKM, UTeM. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Syed Mohamad Shazali Syed Abdul Hamid Syed Abdul Hamid , Syed Abdul Hamid (2010) BEKE 1133: Sistem Dan Peranti Elektronik. [Teaching Resource]

Syed Najib , Syed Salim (2010) BEKC 2543: Kejuruteraan Sistem Kawalan. [Teaching Resource]

Syed Najmuddin, Syed Hassan and Mohd Fauzi, Kamarud-din and Muhd Akmal Noor, Rajikon and Rosli, Saadan and Ahmad Rozelan, Yunus and Amir, Aris and Ramlee, Mustapha and Mustafa, Omar (2010) SOFT SKILLS OF TOURISM FRONTLINERS WORKERS IN MELAKA. Journal of Human Capital Development, 3 (2 ). pp. 55-66. ISSN 1985-7012

Syida , Mat Yazib (2010) Rubbish Collector Monitoring System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

T

T., Joseph Sahaya Anand (2010) Microstructural Analysis of Intermetallic Ni5Al3 Thin Films. Journal of Mechanical Engineering and Technology, 2 (1). pp. 25-39. ISSN 2180-1053

Tahir, Zulkifli and M.A., Burhanuddin (2010) A HYBRID MAINTENANCE MANAGEMENT MODEL IN DECISION SUPPORT SYSTEM FOR SMALL AND MEDIUM PROCESSING INDUSTRIES. Masters thesis, UTeM.

Tahir, Zulkifli and M.A., Burhanuddin and Anton, S P (2010) A Novel of Hybrid Maintenance Management Models for Industrial Applications. A Novel of Hybrid Maintenance Management Models for Industrial Applications., 1 (1). pp. 311-316. ISSN 978-602-8509-15-2

Tajul Ariffin, Abdullah (2010) BMFR 4173: Rekabentuk Untuk Persekitaran (Design For Environment). [Teaching Resource]

Tamaldin, Noreffendy (2010) Experimental Investigation of Emission from a Light Duty Diesel Engine Utilizing Urea Spray SCR system. PhD thesis, Coventry University.

Tamaldin, Noreffendy (2010) Experimental study of SCR in a light-duty diesel exhaust to provide data for validation of a CFD model using the porous medium approach. SAE 2010 World Congress & Exhibition, April 2010, Detroit, MI, USA, Session: Diesel Exhaust Emission Control: SCR (Part 3 of 3) (2010-01-1177).

Tan, Kean Siak (2010) Analysis The Performance Between Dual Stack And IPv6 Tunneling Mechanism. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, Kui Siong (2010) Implementation Of Production Schedule Board To Decide Standard Production Time In Manufacturing Industry (Case Study: Asia Roofing Industries Sdn Bhd). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan, CheeFai (2010) Smart system for aircraft passenger neck support. PhD thesis, Eindhoven University of Technology.

Tan, CheeFai and Chen, Wei and Rauterberg, G.W.M. (2010) An Approach to Study the Body Back Discomfort of Economy Class Aircraft Passenger. In: International Conference on Applied Human Factors and Ergonomics (AHFE2010), Miami, Florida, US.

Tan, CheeFai and Chen, Wei and Rauterberg, G.W.M. (2010) Seat Discomfort of Dutch Truck Driver Seat: A Survey Study and Analysis. In: SAE 2010 World Congress & Exhibition, 13 April 2010, Detroit, Michigan, United States .

Tan, CheeFai and Chen , Wei and Rauterberg , G.W.M. (2010) SELF-REPORTED SEAT DISCOMFORT AMONG DUTCH COMMERCIAL TRUCK DRIVERS. In: FISITA2012, 30 May - 4 June, Budapest, Hungary.

Tan, Kah Teng (2010) Student Residential College Management. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Tan, Kim See (2010) MENE5013: Elektronik Rekabentuk Lanjutan. [Teaching Resource]

Tan, Kim See (2010) MENE5213: Digital Control. [Teaching Resource]

Tan, Teck Seong (2010) Optimal Stabilization Control Of Autonomous Helicopter Using Genetic Algorithm in C Language Environment. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Chee Seong (2010) Academic Achievement Report And Analysis Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Chong Kai (2010) Real Time Orientation Control And Analysis Of A Remotely Operated Vehicle Using Interface Of MATLAB And Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Kai Chia (2010) Game For Attention Deficit Hyperactivity Disorder (ADHD) Children Courseware. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tan , Kit Yee (2010) E-Pregnancy System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Tan , Shu Yee (2010) Workshop II Management System: Progress Submission Module (WMSPS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Tan , Sook Ting (2010) Workshop II Management System-Marking Module (WMSMM). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Tan , Su Ning (2010) SHA Encryption System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Tan , Chee Fai and Chen , W. and Kimman, F. and Rauterberg, G.W.M. (2010) Sleeping in Sitting Posture Analysis of Economy Class Aircraft Passenger. In: Electronic Engineering and Computing Technology, Series: Lecture Notes in Electrical Engineering. Lecture Notes in Electrical Engineering, 60 . Springer Netherlands, pp. 703-713. ISBN 978-90-481-8776-8

Tan , CheeFai and Chen, Wei and Rauterberg, G.W.M. (2010) TOTAL DESIGN OF LOW COST AIRCRAFT CABIN SIMULATOR. In: INTERNATIONAL DESIGN CONFERENCE - DESIGN 2010, May 17 - 20, Dubrovnik - Croatia.

Tan , Kim See and Najmiah Radiah, Mohamad (2010) BENT 3133: Elektromagnetik. [Teaching Resource]

Taufik, , (2010) BMCG 2123: Pemindahan Haba (Heat Transfer). [Teaching Resource]

Taufik, . and Tahul Ariffin, Abdullah (2010) Design and Analysis of Production Tooling for Metal Matrix Composite by Investment Casting. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Taufik, Haryoni and Siti Umi Hani, Mohamed and Sivarao, Subramonian and Tajul Ariffin, Abdullah (2010) Design and Analysis of Long Cylindrical Workpiece Fixtures. In: The 2 nd International Conference on Engineering and ICT, 18th-20th February 2010, Melaka.

Taufik, , (2010) BMFR 3143: Rekabentuk Alat Pengeluaran (Production Tool Design). [Teaching Resource]

Taufik, , (2010) BMFR 4152: Design Case Studies. [Teaching Resource]

Taufik, , and Aman, Shah and Abdullah, T.A. and Sivarao, Subramonian (2010) Design Rules for Sheet Metalworking Based on Design for Manufacture (DFM) Methodology. Universiti Teknikal Malaysia Melaka, pp. 219-223.

Taufik, , and Kee, Kuo Zhuan and Tajul Ariffin, Abdullah and Sivarao, Subramonian (2010) Design Optimization on Rotary Draw Tube Bending Parameters using FEA. International Conference on Design and Concurrent Engineering 2010 (iDECON 2010). pp. 213-217. ISSN 983-2948-84-1

Tay, Choo Chuan (2010) MPSW5053/PPSW6053: Pengurusan Projek. [Teaching Resource]

Tay, Choo Chuan and Dora, Mohd Taib and Abdul Majid, Izaidin and Kamarudin, Mohd Fauzi and Baharon, Mohd Rizuan and Choo, Yun Huoy (2010) Model Kemasukan dan Penilaian Kemahiran Insaniah di UTeM. In: Proceedings of International Conference on Communication Dynamics 2010, 5-6 April 2010, Universiti Teknikal Malaysia Melaka.

Tay, Choo Chuan and Sakidin, Hamzah and Herman, Nanna Suryana and Baharon, Mohd Rizuan (2010) Second Level Password Generator. In: The Third International Conference on Mathematics and Natural Sciences, 23-25 November 2010, Bandung, Indonesia..

Tay, Shin Yoon (2010) Effect Of Different Heat Sensitization Temperature On Type 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tay, Shin Yoon (2010) Effect of Different Heat Sensitization Temperature On Type 304 Stainless Steel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tay , Choo Chuan and Sakidin, Hamzah and Jamaludin, Irma Wani and Abdul Razak, Norazlina and Anwar Apandi, Nur Ilyana (2010) Introduction to linear Algebra. Penerbit Universiti, UTeM, Malacca. ISBN 9789832948872

Tay , Yon Yon (2010) Simulation Of Biodiesel Production From Used Frying Oil (UFO) Using Alkaline - Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tee, Chu Ling (2010) Quality Improvement In The Manufacturing Industry An Application Case. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh, Tze Chee (2010) Hardware Design Of The Autonomous Helicopter For Stabilization Control. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teh , Khang Ling (2010) Design And Testing Of Mechanical Juice Extraction Especially For Sugar Cane. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Teoh , Chun Keat (2010) Design And Testing Of Lifting Or Harvesting Mechanism For Nata De Coco Manufacturing Industries. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tham, Wai Kean (2010) Warehouse Order System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Thang , Jun Boon (2010) Visual Interface To Controlling A Dot Matrix LED Display. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Timothy , Guri (2010) The Effect Of Temperature Rise On The Electrical Characteristic Of Solid Material. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tinesh , Subramanian (2010) Human Face Recognition System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Toh , Nga Ming (2010) One Malaysia Avatar Maker Game Application. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Toibah, Abd Rahim (2010) BMFB 4253: Seramik Kejuruteraan (Engineering Ceramics). [Teaching Resource]

Too , Hui Zhen (2010) Auto Trading (Car) Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Too , Phooi Wah (2010) Development Of Concept Design For An Ideal Intercity Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Tuan Nor Azrina, Tuan Lah (2010) Cooperative Beamforming For Wireless Sensor Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

U

Ubaidillah, . (2010) Sixth Order Polynomial Model And Skyhook Algorithm Based Fuzzy Logic Control Of Magnetorheological Damper For Automotive Suspension System. Masters thesis, UTeM.

Ummi Imarah , Mamat (2010) Optimization Of Solar Panel Positioning For Maximum Energy Conversion. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Ummi Raba' ah, Hashim (2010) DITP 2113: Struktur Data Dan Algoritma. [Teaching Resource]

Ummi Raba'ah, Hashim (2010) BITP 1113: Teknik Pengaturcaraan. [Teaching Resource]

V

Visnu, Varada (2010) Site Planning For Wireless Mesh Network. Project Report. UTeM, Melaka, Malaysia. (Submitted)

W

W. Nurul Aliaa, W. Mazlan (2010) Face Detection Using Probabilistic Neural Network (PNN). Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wahyono, Sapto Widodo (2010) Design of New Punch Geometry to Reduce Force in Sheet Metal Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wahyono Sapto, Widodo (2010) BMFR 3153: Analisis Kejuruteraan Berbantu Komputer (Computer Aided Engineering Analysis). [Teaching Resource]

Wahyono Sapto, Widodo (2010) BMFR 4113: CAD/CAM. [Teaching Resource]

Wan Daud, Wan Mohd Bukhari and Sudirman , R and Koh, A. C and Safri, N.M and Mahmood, N.H (2010) EEG Different Frequency Sound Response Identification using Neural Network and Fuzzy Techniques. 2010 6th International Colloquium on Signal Processing and Its Applications (CSPA), . pp. 1-6. ISSN 978-1-4244-7121-8

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba (2010) Survey Approaches In Green Supply Chain Management Research: An Analysis. In: Regional Engineering Postgraduate Conference 2010, 28-29, September 2010, Bandar Baru Bangi, Malaysia.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Abdul Ghani, Jaharah (2010) Improving Production Line Performance: A case study. In: 2010 INTERNATIONAL CONFERENCE ON FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, 11-12, December 2010, Chongqing, China.

Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam and Md Deros, Baba and Ismail, Ahmad Rasdan (2010) Product and Vendor Development Programme in Encouraging Supply Chain Management: A Case Study. In: 2010 INTERNATIONAL CONFERENCE ON FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, 11-12, December 2010, Chongqing, China.

Wan Mohd Farid , Wan Ramli (2010) Design And Develop Miniature Tesla Coil. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Mohd Puzi, W. N. and Hussin, B. and Shahbodin, F. (2010) DEVELOPMENT OF RESEARCH FRAMEWORK FOR PBL PROBLEM SCENARIO USING LINEAR & NON-LINEAR MULTIMEDIA. In: Proceedings of Regional Conference on Knowledge Integration in ICT 2010, 01 June 2010, Palm Garden Hotel, Putraja, Malaysia.

Wan Mohd farid, Wan Mohamad (2010) BMCB 2423: Sains Bahan. [Teaching Resource]

Wan Muhamad Hatta, S.F. and Soin, N. and Abd Hadi, D. and Zhang, J.F. (2010) NBTI degradation effect on advanced-process 45 nm high-k PMOSFETs with geometric and process. Microelectronics Reliability, 50 (9-11). pp. 1283-1289. ISSN 0026-2714

Wan Nor Syahira, Wan Ali (2010) Fuzzy Logic Control Of An Autonomous Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nor Syahira , Wan Ali (2010) Fuzzy Logic Control Of An Autonomous Mobile Robot. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Nur Fajrina , Wan Azmi (2010) E-Document For Log Book. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wan Nurul Fatihah, Wan Mohamad (2010) Hibiscus Cannabinus L. Brick Block. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wan Sazli, Nasaruddin Saifudin (2010) BITM 2213: Animasi Komputer. [Teaching Resource]

Wan Sazli Nasaruddin, Saifudin (2010) BITM 3133: Pembangunan Permainan Komputer. [Teaching Resource]

Wan Syafidatul Ima , Wan Omar (2010) Wireless Lab Attendance System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wasli, Chairulsyah (2010) DENT 2543: Prinsip Perhubungan. [Teaching Resource]

Wasli, Chairulsyah and Mohamad Kadim, Suaidi (2010) BENT 4123: Optoelektronik Dan Komunikasi Optik. [Teaching Resource]

Wee, Sek Yong (2010) BACS 2213: Statistik & Kebarangkalian. [Teaching Resource]

Wiradani, Md Ali (2010) Motion Tracking System Using Computer Vision With Opencv Source Software. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Jiar Mean (2010) Development Of Concept Design For An Ideal City Bus. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Cheng Yeong (2010) Design And Analysis Of Heat Flow For Dryer System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong, Cheong Lun (2010) Implementation Of Four Step Search (FSS) Algorithm For Motion Estimation Using MATLAB. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Hor Yan (2010) An Analysis Of Attribute Reduction Techniques For Breast Cancer Dataset. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong , Shire Chui (2010) One Stop Health Care Center (OSHC). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong , Siew Ching (2010) UTeM Traffic Department (UTD) SMS And Online System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong , Nelson Wye Leong (2010) Improve Product Sustainability Through DFE Approach On Design Of Home Appliances : A Case Study On Electric Iron. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Wong , Woon Soon (2010) FTMK Lab And Asset Management System (FLAMS) Event Management And Timetable Management Module. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Wong , Yan Chiew (2010) Optimization Of Analog Circuit Design Using Artificial Intelligence : Genetic Algorithms. Project Report. UTeM, Melaka , Malaysia. (Submitted)

Woo , Zhi Xuan (2010) Diabetes Risk Evaluation Expert System (DREES). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Y

Y, Norzihani (2010) Finite Difference Method for Solving Material Balance Equation in Lithium-Ion Cell. Journal of Materials Science and Engineering, 4 (11). pp. 94-99. ISSN 1934-8959

Yahya, Ibrahim (2010) BITP 3513: Pengaturcaraan Pangkalan Data Lanjutan. [Teaching Resource]

Yang , Chee Heng (2010) Comparison Study On The Microstructure And Corrosion Rate Of Ti-6Al-4V. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yao, Tee Seng (2010) Machine Vision In Character Recognition. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, David Fook Weng and Wong, Yan Chiew and Noor Shahida, Mohd Kasim and Ngo, Hea Choon (2010) Analysis on the Performance of the Long-Wavelength Vertical-Cavity Surface-Emitting Laser. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, David Fok Weng and Zaiton, Abdul Mutalip and Juwita, Mohd Sultan (2010) BENT 2113: Litar Elektrik 2. [Teaching Resource]

Yap, Pei Yung (2010) Biodiesel Production From Used Frying Oil (UFO) Using Alkaline-Based Catalysts. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap, Yung Lin (2010) Optimal Sizing Of Transistor's Parameter Using Genetic Algorithm. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yap , Ken Yew (2010) Real Estate Trading Systems (RETS). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Yap , Woon San (2010) Workshop II Management System Lecturer And Student Assignation Module (LSA). Project Report. UTeM, Melaka,Malaysia. (Submitted)

Yaw, Chong Hong (2010) Analysis Of EDM Parameters During The Micro Hole Machining Of Tungsten Carbide. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yeoh, Seng Fu (2010) Corrosion Behaviors Of Tool Steel In Tannic Acids. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yew, Wai Keai (2010) Diesel Engine Performances Of Alkaline-Catalyst UFO Biodiesel. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yewguan, Soo (2010) Quantitative Estimation Of Muscle Fatigue In Handgrip Tasks Using Surface Electromyography. PhD thesis, University of Tokyo.

Yogan J, Kumar (2010) BACS 1253: Matematik Sains Komputer 1. [Teaching Resource]

Yong, Poh Yee (2010) The Study Of Palm Oil Fiber For Filtration Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yong Wee, S. and Siong Hoe, L. and Basari, A. S. H. and Hussin, B. (2010) Examining the Behavior Changes in Belief and Attitude among Smart Phone Users for Mobile Learning. In: 2010 2nd International Conference on Information and Multimedia Technology , 28-30 December, 2010, HongKong.

Yoon, Xue Fang (2010) An Assessment On Graphite Milling Process. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Yosza, Dasril (2010) BENH 1253: Persamaan Pembezaan. [Teaching Resource]

Yosza, Dasril (2010) BENH 1243: Matematik Kejuruteraan. [Teaching Resource]

Yu , Kai Ling (2010) Parkson Book Store Information Management System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Yuseni, Ab Wahab (2010) Agent Technology Approach To Improve KUIM Leave Management System. Masters thesis, UTeM.

Yusmady, Mohamed Arifin (2010) BMCT 3133: Termodinamik II. [Teaching Resource]

Yusmarnita, Yusop (2010) BENE 2163: Sistem Elektronik. [Teaching Resource]

Yusmarnita, Yusop (2010) DENE 3353: Elektronik Gunaan. [Teaching Resource]

Yusof, R. and Selamat, S. R. and Sahib, S. and Abdollah, M. F. and Mas'ud, M. Z. and Ramly, M. (2010) New Multi-step Worm Attack Model. Journal of Computing, 2 (1). pp. 1-7. ISSN 2151-9617

Yusof, R. and Selamat, S. R. and Sahib, S. and Mas'ud, Z. and Abdollah, M. F. and Ramly, M. (2010) An Improved Traditional Worm Attack Pattern. International Symposium on Information Technology 2010. pp. 1067-1072. ISSN 978-1-4244-6716-7

Yusuf Lada, Musa and Bugis, Ismadi and Talib, Md Hairul Nizam (2010) STUDY CASE ON SIMULATION AN ACTIVE FILTER BASED ON LOAD DC MOTOR. In: World Engineering Congress 2010, 02 - 05 August 2010, Kuching, Sarawak..

Yusup Lada, Musa and Bugis, Ismadi and Talib, Md Hairul Nizam (2010) Simulation a Shunt Active Power Filter using MATLAB/Simulink. In: The 4th International Power Engineering and Optimization Conf. (PEOCO2010),, 23-24 June 2010, Shah Alam, Selangor.

Z

Zaharudin, Mohd Helmi (2010) The Design And Development Of Water Heater System Using Solar Thermal Radiation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaheera, Zainal Abidin (2010) BITS 2313: Rangkaian Komputer Setempat. [Teaching Resource]

Zaheera, Zainal Abidin (2010) BITS 2323: Rangkaian Komputer Meluas. [Teaching Resource]

Zaheera, Zainal Abidin (2010) BITS 3423: Keselamatan Teknologi Maklumat. [Teaching Resource]

Zaheera, Zainal Abidin (2010) DITS 2413: Keselamatan Komputer. [Teaching Resource]

Zahriladha, Zakaria (2010) Design Of Lossy Microwave Filters. PhD thesis, University of Leeds.

Zainab , Mahamud (2010) Porous Photocatalytic Nanotitania (T102) Thin Films For Environmental Self-Cleaning Applications. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zainal, Abdullah (2010) Melaka Broadband : The Competency Study To The Performance On Sales Workforce In Consumer Sales Unit TM Melaka. Masters thesis, UTeM.

Zairina, Othman (2010) Developtment Of 12VDC To 240VAC Inverter. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zairul Fazura , Mohd Zaidi (2010) Rekabentuk Dan Membina Sistem Penyaman Udara Mudah Alih. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zairulazha, Zainal (2010) DMCC 3733: Kejuruteraan Kawalan & Instrumentasi. [Teaching Resource]

Zaiti Akhtar Puteri , Mokhtar (2010) E-Learning For Form Five Student Of Sekolah Menengah Kebangsaan Tengku Afzan. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zaiton, Abdul Mutalip and Azahari, Salleh and Nurmala Irdawaty, Hassan (2010) Optical Communication Interface With Sharc ADSP-21065L. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zakaria, Mohd Sharim and Ahmad, Mohd Riduan (2010) Throughput-Received Power Relationship for File Transfer Protocol (FTP) Service in Wireless Mesh Network (WMN). In: International Symposium on Broadband Communication (ISBC), 11-14 July 2010, Melaka, Malaysia.

Zakaria, Mohd Sharim and Ahmad, Mohd Riduan and Johal, M. Syahrir and Suaidi, M. Kadim (2010) Modeling and Performance Analysis of Throughput-Received Power Relationship for Indoor Wireless Mesh Network. In: IMMAC, 11-12 June 2010, Jakarta, Indonesia.

Zakiah, Abd Halim (2010) BMCB 4443: Analisis Kegagalan Tanpa Musnah. [Teaching Resource]

Zakiah, Abd. Halim (2010) BMCU 2072: Kaedah Berangka. [Teaching Resource]

Zamani, Md Sani and Aminurrashid, Noordin and Md Hairul Nizam, Talib and Mohd Razali, Mohamad Sapiee and Muhammad Sharil, Yahaya (2010) Robotics and Sensor: The Development of an Application Kit from a Microcontroller Based System in Controlling Motor and Analyzing Multiple Sensors Characteristic for Robotics Application. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zamberi, Jamaludin (2010) BMFA 3453: Sistem Kawalan (Advanced Control System). [Teaching Resource]

Zamberi, Jamaludin (2010) BMFP 2423: Kawalan & Instrumentasi (Instrumentation & Control). [Teaching Resource]

Zamberi, Jamaludin (2010) MMFS5043: Robotics And Automation. [Teaching Resource]

Zamberi, Jamaludin (2010) MMFS5043: Robotik Dan Automasi (Robotics And Automation). [Teaching Resource]

Zamzaliza, Roslan (2010) Braille To Voice Converter Using PIC Microcontroller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zanariah, Mansor (2010) Broadband Adoption In Malaysia. Masters thesis, UTeM.

Zaren Mukrish , Zainal Ariffin (2010) Production Losses Analysis Of An Automotive Component Using General Linear Model. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zarif , Che Hashim (2010) Home Appliances SMS Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zarina, Mohd Noh (2010) DENC 3453: Mikropemproses. [Teaching Resource]

Zarina , Mohd Noh and Muzalifah, Mohd Said and Norhidayah, Mohamad Yatim and Rostam Affendi, Hamzah (2010) Implementing the Controller Area Network (CAN) Protocol for Multiplex System. Journal of telecommunication, electronic and computer engineering , 2 (2). pp. 35-41. ISSN 2180-1843

Zarita, Mohd Kosnin (2010) BITG 1113: Pengaturcaraan Komputer. [Teaching Resource]

Zarita, Mohd Kosnin (2010) BITG 1113: Pengaturcaraan Komputer. [Teaching Resource]

Zarith Sufiah , Mustafa (2010) Waste Rubber Tyre As Road Divider Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zatul Iffah, Ahmad (2010) Active Suspension System With Fuzzy Logic Controller. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zawani , Abdul Hadi (2010) A Study Of Harmonics Effect On Electromechanical Overcurrent Relay. Project Report. UTeM, Melaka,Malaysia. (Submitted)

Zolkepli, Buang (2010) BMFB 2213: Bahan Kejuruteraan (Engineering Materials). [Teaching Resource]

Zubir , Mahmod (2010) Design Of Portable Power Supply From Wave Energy. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zul Atfyi Fauzan, Mohammed Napiah (2010) BMFA 3463: Mikropemproses. [Teaching Resource]

Zul Azri, Muhamad Noh (2010) DITS 3722: Perlaksanaan Dan Pentadbiran Aktif Direktori. [Teaching Resource]

Zul Azri, Muhamad Noh (2010) Provisioning QoE And QoS Guarantee For Audio-Video Transmission Over IEEE 80211e HCCA Wireless LANs. Masters thesis, Nihon Fukushi University.

Zul Azri, Muhamad Noh (2010) DITS 3722 : Perlaksanaan Dan Pentadbiran Aktif Direktori. [Teaching Resource]

Zulasyraf , Mohd Badarudin (2010) Analysis On Small Compressed Air Energy Storage (CAES) Characteristic For Power Generation. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulfadli, Kasmani (2010) Simulation Of Automatic Steering System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulhasnizam, Hasan (2010) Optimizing Handoff Delay In WLAN. Masters thesis, UTeM.

Zulkefli, Iberahim (2010) Advanced Public Address System. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zulkifli, Mohd Rosli (2010) BMFB 4263: Pemilihan Bahan (Materials Selection). [Teaching Resource]

Zulkifli, Mohd Rosli (2010) BMFB 4283: Analisa Kegagalan Bahan & NDT (Failure Analysis & NDT). [Teaching Resource]

Zulkifli, Tahir and Nur Azman, Abu and Shahrin , Sahib and Nanna Suryana, Herman (2010) CNC PCB drilling machine using novel natural approach to euclidean TSP. In: 3rd IEEE International Conference on Computer Science and Information Technology (ICCSIT), 2010 , 9-11 July 2010 , Chengdu, China. (Submitted)

Zuraiha, Mohamad (2010) Mobile Educational Game : Times Maniac. Project Report. UTeM, Melaka, Malaysia. (Submitted)

Zuraihanim , Bachok (2010) PC Catalog System. Project Report. UTeM, Melaka,Malaysia. (Submitted)

This list was generated on Wed Oct 18 12:43:55 2017 MYT.