Items where Year is 2019

Article

Mohammed Rasheed and Omar, Rosli and Sulaiman, Marizan and Halim, Wahidah (2019) Energy Storage Management Control For Nine-Level Inverter Based On Super-Capacitors. Journal of Engineering and Applied Sciences, 14 (22). pp. 8329-8343. ISSN 1816-949X

Mohammed Rasheed and Omar, Rosli and Sulaiman, Marizan and Abd Halim, Wahidah (2019) A Modified Cascaded H-Bridge Multilevel Inverter Based On Particle Swarm Optimisation (PSO) Technique. Indonesian Journal of Electrical Engineering and Computer Science, 16 (1). pp. 41-51. ISSN 2502-4752

A Subki, A Shamsul Rahimi and Mohd Tumari, Mohd Zaidi and Abd Rashid, Wan Norhisyam and Jidin, Aiman Zakwan and Muhammad Mustafa, Ahmad Nizamuddin (2019) Hardware Implementation Of Single Phase Three-Level Cascaded H-Bridge Multilevel Inverter Using Sinusoidal Pulse Width Modulation. International Journal Of Power Electronics And Drive System (IJPEDS), 10 (2). pp. 625-635. ISSN 2088-8694

A. Perumal, Puvanasvaran and Safady, Hammam M. H. and Tay, Choo Chuan and Yoong, Sai Sieng (2019) Performance Measure Of Industrial Robotics In Lean Enterprise: A Case Study In Semiconductor Industry. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 12-16. ISSN 2277-3878

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2019) Classification Of Losses In Overall Equipment Effectiveness Calculation. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 7-11. ISSN 2277-3878

AL-Khaleefa, Ahmed Salih and Mohd Riduan, Ahmad and Awang Md Isa, Azmi and AL-Saffar, Ahmed and Mohd Esa, Mona Riza and Malik, Reza Firsandaya (2019) MFA-OSELM Algorithm For Wifi-Based Indoor Positioning System. INFORMATION, 10 (4). pp. 1-20. ISSN 2078-2489

Ab Ghani, Sharin and Md Yusoff, Mohd Idris (2019) Comparative Study of Residential Lighting Technologies. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 14 (1). pp. 8-20. ISSN 2462-1943

Ab Ghani, Sharin and Sutan Chairul, Imran and Ab Aziz, Nur Hakimah and Abu Bakar, Norazhar and Ahmad Khiar, Mohd Shahril (2019) Effects Of Moisture Content And Temperature On The Dielectric Strength Of Transformer Insulating Oil. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 107-116. ISSN 2289-7879

Ab Hadi, Nik Azran and Lim, Hui Yee and Zainal Abidin, Amar Faiz and Mohd Annuar, Khalil Azha and Zaid, Zulhilmi and Abd Ghani, Zamre and Mohd Ab Halim, Mohd Firdaus and Nor Shah, Mohd Badril (2019) Development Of An Automatic Can Crusher Using Programmable Logic Controller. International Journal of Electrical and Computer Engineering, 9 (3). pp. 1795-1804. ISSN 2088-8708

Ab Majid, Nurul Kausar and Ismail, Fatimah Sham (2019) Electronics System Thermal Management Optimization Using Finite Element And Nelder-Mead Method. Telkomnika (Telecommunication Computing Electronics and Control), 17 (5). pp. 2268-2275. ISSN 2302-9293 (In Press)

Ab Rashid, Mohd Zamzuri and Mohd Yakub, Mohd Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Ali Mat, Mohamed Sukri and Mamat, Normaisharah M. and Mohd Putra, S. M. S. and Roslan, Shairatul Amni Husna and Mohd Shah, Hairol Nizam and Mohd Aras, Mohd Shahrieel (2019) Comprehensive Review On Controller For Leader-Follower Robotic System. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 985-1007. ISSN 0379-5136

Ab Rashid, Mohd Zamzuri and Mohd Yakub, Mohd Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Ali Mat, Mohamed Sukri and Mamat, Normaisharah M. and Mohd Putra, S. M. S. and Roslan, Shairatul Amni Husna and Mohd Shah, Hairol Nizam and Mohd Aras, Mohd Shahrieel and Arshad, Mohd Rizal (2019) Reconfigurable Multi-Legs Robot For Pipe Inspection: Design And Gait Movement. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 1132-1144. ISSN 0379-5136

Ab Rashid, Siti Rosmaniza and Ahmad, Norulhusna and Syed Yusof, Sharifah Kamilah (2019) Signal modulation techniques in non-orthogonal waveform for future wireless communication system. Indonesian Journal Of Electrical Engineering And Computer Science, 15 (3). pp. 1458-1465. ISSN 2502-4752

Ab Wahab, Norfariza and Basharudin, Shiradzi and Md Nasir, Nur Syuhada and Ruslan, Eliyana and Abdul Hadi, Dayanasari and Boejang, Hambali (2019) Optimization of square shape portable vacuum clamping (Square) based on machining parameter. ARPN Journal Of Engineering And Applied Sciences, 14 (13). pp. 2433-2436. ISSN 1819-6608

Ab Wahab, Norfariza and Mohd Azmi, Siti Haidar Atiah and Nordin, Abd Khahar and Abdul Hadi, Dayanasari and Johari, Siti Halma and Mohd Najib, Suhaila (2019) Development And Analyzation Of Linear Positioning Table For Drilling Machine. ARPN Journal of Engineering and Applied Sciences, 14 (3). pp. 743-749. ISSN 1819-6608

Ab Wahab, Norfariza and Wan Idrus, Syed Ahmad Sharif and Nordin, Abd Khahar (2019) Analysis Of High Speed Shear Slitting Machine Based On Cutting Force, Temperature And Cutting Speed. ARPN Journal of Engineering and Applied Sciences, 14 (11). pp. 2106-2110. ISSN 1819-6608

Abal Abas, Zuraida and Mohd Zaki, Nurul Hafizah and Asmai, Siti Azirah and Abdul Rahman, Ahmad Fadzli Nizam and Zainal Abidin, Zaheera (2019) Enhanced Community Detection Based On Cross Time For Higher Visibility In Supply Chain: A Six-Steps Model Framework. International Journal of Innovative Technology and Exploring Engineering, 9 (1). pp. 4509-4513. ISSN 2278-3075

Abal Abas, Zuraida and Shaffiei, Zatul Amilah and Zainal Abidin, Zaheera and Abdul Rahman, Ahmad Fadzli Nizam and Jasmi, Muhammad Izzuddin (2019) Energy saving glass: modelling the coating design from mathematical perspective. Journal Of Engineering Science And Technology, 14 (4). 1789 - 1798. ISSN 1823-4690

Abal Abas, Zuraida and Zainal Abidin, Zaheera and Ramli, Mohamad Raziff (2019) Modeling Nurse Time For School Health Service Using System Dynamics. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 3277-3284. ISSN 2278-3075

Abbasi, Muhammad Inam and Dahri, Muhammad Hashim and Jamaluddin, Mohd Haizal and Seman, Norhudah and Kamarudin, Muhammad Ramlee and Sulaiman, Noor Hafizah (2019) Design and characterization of millimeter wave planar reflectarray antenna for 5G communication systems. International Journal of RF and Microwave Computer-Aided Engineering, 29 (9). pp. 1-12. ISSN 1096-4290

Abbasi, Muhammad Inam and Jamaluddin, Mohd Haizal and Seman, Norhudah and Dahri, Muhammad Hashim and Kamarudin, Muhammad Ramlee and Sulaiman, Noor Hafizah (2019) Millimeter wave beam steering reflectarray antenna based on mechanical rotation of array. IEEE Access, 7. pp. 145685-145691. ISSN 2169-3536

Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Kadmin, Ahmad Fauzan and Hamzah, Rostam Affendi and Azhar, Muhammad Aidil (2019) Development Of Portable Automatic Number Plate Recognition (ANPR) System On Raspberry Pi. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1805-1813. ISSN 2088-8708

Abd Gani, Shamsul Fakhar and Kadmin, Ahmad Fauzan and Hamid, Mohd Saad and Hamzah, Rostam Affendi and Kong, Hui Fen (2019) Development Of A Portable Community Video Surveillance System. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1814-1821. ISSN 2088-8708

Abd Ghani, Zamre and Kamit, Kamarudin and Zeain, Mohammed Yousif and Zakaria, Zahriladha and Azidin, Farid Arafat and Ab Hadi, Nik Azran and Mohd Isira, Ahmad Sadhiqin and Othman, Hidayatulfathi and Lago, Herwansyah (2019) Development Of A DC To DC Buck Converter For Photovoltaic Application Utilizing Peripheral Interface Controller. ARPN Journal Of Engineering And Applied Sciences, 14 (7). pp. 1317-1324. ISSN 1819-6608

Abd Halim, Zakiah and Jamaludin, Nordin and Putra, Azma (2019) The Effect Of Linkages In The Hierarchical Clustering Of Auto-Regressive Algorithm For Defect Identification In Heat Exchanger Tubes. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 5003-5009. ISSN 2277-3878

Abd Mutalib, Nurliyana and Johari, Siti Halma and Abdul Hadi, Dayanasari and Ahmad, Suziana and Hamzah, Rostam Affendi and Arumugam, Navine and Zahari, Madiha and Ab Wahab, Norfariza (2019) Development Of Shoe Dryer System Using Microcontroller With GSM Module. International Journal of Integrated Engineering, 11 (3). pp. 272-279. ISSN 2229-838X

Abd Rahim, Nasrudin and Gan, Chin Kim and Abdullah, Nor Azliana and Adzman, Noriah Nor (2019) Forecasting Solar Power Using Hybrid Firefly And Particle Swarm Optimization (HFPSO) For Optimizing The Parameters In A Wavelet Transform-Adaptive Neuro Fuzzy Inference System (WT-ANFIS). Applied Sciences, 9 (16). pp. 1-23. ISSN 2076-3417

Abd Rahim, Toibah and Misran, Fatimah and Shaaban, Azizah and Mustafa, Zaleha (2019) Effect Of pH Condition During Hydrothermal Synthesis On The Properties Of Hydroxyapatite From Eggshell Waste. Journal Of Mechanical Engineering And Sciences (JMES), 13 (2). pp. 4958-4969. ISSN 2289-4659

Abd Rashid, Wan Norhisyam and Ismail, Nurfarah Izzati and Lokmanulhakim, Nurhanis (2019) Development Of Crack On Composite Detection Sensor Using Magnetic Induction Concept. International Journal of Electrical and Computer Engineering, 9 (6). pp. 5644-5652. ISSN 2088-8708

Abdollah, Mohd Fadzli and Mahmud, Dayang Nor Fatin and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2019) Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions. Friction, 7 (3). pp. 227-236. ISSN 2223-7690

Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi and Norashid, Norjannahtul Ainah (2019) Comparative Study Of The Tribological Behaviour Of 3D-Printed And Moulded ABS Under Lubricated Condition. Materials Research Express, 6 (8). pp. 1-7. ISSN 2053-1591

Abdollah, Mohd Fadzli bin and Ibrahim, Maziah and Amiruddin, Hilmi (2019) Friction Reduction Of Palm Kernel Activated Carbon Polymer Composite By Lubricant Impregnation. Tribology Online, 14 (5). pp. 411-416. ISSN 1881-2198

Abdollah, Mohd Faizal and S. M. M Yassin, S. M. Warusia Mohamed and Mohd Saudi, Nur Hidayah (2019) Scrutinized System Calls Information Using J48 And Jrip For Malware Behaviour Detection. Journal Of Engineering Science And Technology, 14 (1). pp. 291-304. ISSN 1823-4690

Abdul Azis, Fadilah and Ponaseran, P.S. Giritharan and Md Sani, Zamani and Mohd Aras, Mohd Shahrieel and Othman, Muhammad Nur (2019) Real-Time Video Road Sign Detection And Tracking Using Image Processing And Autonomous Car. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 495-500. ISSN 2278-3075

Abdul Hadi, Dayanasari and Jidin, Aiman Zakwan and Ab Wahab, Norfariza and Zahari, Madiha and Abd Mutalib, Nurliyana and Johari, Siti Halma and Ahmad, Suziana and Mustafa, Nuzaimah (2019) CMOS Ring Oscillator Delay Cell Performance: A Comparative Study. International Journal of Electrical and Computer Engineering, 9 (3). pp. 1757-1764. ISSN 2088-8708

Abdul Hamid, Mohd Hakim and Abu, Nur Azman and Mohamad, Siti Nurul Mahfuzah and Idris, Aris and Zakaria, Zahriladha and Sulaiman, Zuraidah (2019) Satisfiable Integer Programming Algorithm On Distributed Inter Process Communication (SIP-DIPC). Journal Of Advanced Research In Dynamical And Control Systems, 11 (8). pp. 315-322. ISSN 1943-023X

Abdul Hamid, Nurfaizey and Mohd Daud, Mohd Ahadlin and Muhammad, Noryani and Mansor, Muhd Ridzuan and Che Long, Faizah and Tucker, Nick (2019) An Investigation Of Using Grey Scale Image Analysis For Predicting The Amount Of Deposited Electrospun Nanofibres. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4679-4692. ISSN 2289-4659

Abdul Kadir, Aida Fazliana and Khatib, Tamer and Loo, Soon Lii and Hassan, Elia Erwani (2019) Optimal Placement And Sizing Of Photovoltaic Based Distributed Generation Considering Costs Of Operation Planning Of Monocrystalline And Thin-Film Technologies. Journal Of Solar Energy Engineering, Transactions Of The ASME, 141 (1). pp. 1-8. ISSN 0199-6231

Abdul Latiff, Anas and Baharom, Mohamad Faizal and Harun, Sulaiman Wadi and Arof, Hamzah and Ab Rahman, Mohd Fauzi and Wang, Pengfei (2019) Lutetium oxide film as a passive saturable absorber for generating q-switched fiber laser at 1570 nm wavelength. Optical Fiber Technology, 50. pp. 82-86. ISSN 1068-5200

Abdul Raheem, Hayder Adil and Al-Shami, Samer Ali Hussein and Abdul Rashid, Nurulizwa and Jasim Mohammed, Zaid and Raad, Wisam (2019) The Determinants Of Information Technology Towards Innovation Performance In Iraqi SMEs. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 770-774. ISSN 2278-3075

Abdul Rahman, Ahmad Idil and Bahari, Muhammad Akmal and Baharudin, Zikri Abadi (2019) Investigation of zero crossing detection for first return stroke in negative cloud-to -ground lightning flash. International Journal Of Integrated Engineering, 11 (3). pp. 286-292. ISSN 2229-838X

Abdul Rasib, Amir Hamzah and Abdullah, Rohana and Ebrahim, Zuhriah and Mohamad Rafaai, Zubaidi Faiesal (2019) Improvement of overall equipment effectiveness through application of single-minute exchange of die in automotive manufacturing. TEST Engineering And Management, 81. pp. 3650-3659. ISSN 0193-4120

Abdul Rasib, Amir Hamzah and Ebrahim, Zuhriah and Muhamad, Mohd Razali (2019) Deployment Of Gross Profit Loss For Attenuating Time Loss Impact In Automotive Industries. International Journal Of Scientific & Technology Research, 8 (12). pp. 2208-2212. ISSN 2277-8616

Abdul Shukor, Fairul Azhar and Mohd Nasir, Nur Ashikin and Aris Fazil, Aris Luqmanul Hakim and Raja Othman, Raja Nor Firdaus Kashfi (2019) Basic characteristics of wireless power transfer. Journal Of Engineering Science And Technology, SU18. pp. 168-178. ISSN 1823-4690

Abdulhameed, Muhannad Kaml and Mohamad Isa, Mohd Sa'ari and Zakaria, Zahriladha and Mohd Ibrahim, Imran and Mohsen, Mowafak Khadom and Dinar, Ahmed Musa and Attiah, Mothana Lafta (2019) Novel design of triple-band EBG. Telkomnika (Telecommunication Computing Electronics and Control), 17 (4). pp. 1683-1691. ISSN 1693-6930

Abdulhammed, Muhannad Kamil and Mohamad Isa, Mohd Sa'ari and Zakaria, Zahriladha and Mohd Ibrahim, Imran and Mohsen, Mowafak Khadom (2019) Radiation Pattern Control Of Microstrip Antenna In Elevation And Azimuth Planes Using EBG And Pin Diode. International Journal Of Electrical And Computer Engineering (IJECE), 9 (1). pp. 332-340. ISSN 2088-8708

Abdulhammed, Muhannad Kaml and Mohamad Isa, Mohd Sa'ari and Zakaria, Zahriladha and Mohd Ibrahim, Imran and Mohsen, Mowafak Khadom and Attiah, Mothana Lafta and Dinar, Ahmed Musa (2019) Radiation control of microstrip patch antenna by using electromagnetic band gap. International Journal of Electronics and Communications (AEÜ), 110. pp. 1-11. ISSN 1434-8411

Abdullah, Abdul Rahim and Mohd Ali, Nursabillilah and Tengku Zawawi, Tengku Nor Shuhada and Too, Jing Wei and Mohd Saad, Norhashimah (2019) Application Of Gabor Transform In The Classification Of Myoelectric Signal. Telkomnika (Telecommunication Computing Electronics and Control), 17 (2). pp. 873-881. ISSN 1693-6930

Abdullah, Abdul Rahim and Mohd Ali, Nursabillilah and Too, Jing Wei and Tengku Zawawi, Tengku Nor Shuhada and Mohd Saad, Norhashimah (2019) Classification Of Myoelectric Signal Using Spectrogram Based Window Selection. International Journal of Integrated Engineering, 11 (4). pp. 192-199. ISSN 2229-838X

Abdullah, Abdul Rahim and Mohd Saad, Norhashimah and Too, Jing Wei (2019) Study Of EMG Feature Selection For Hand Motions Classification. International Journal Of Human And Technology Interaction (IJHATI), 3 (1). pp. 19-24. ISSN 2590-3551

Abdullah, Abdul Rahim and Tee, Wei Hown and Nik Anwar, Nik Syahrim and Yusoff, Mohd Rahimi and Jopri, Mohd Hatta and Musa, Haslinda (2019) Spectrogram Based Window Selection For The Detection Of Voltage Variation. International Journal of Integrated Engineering, 11 (3). pp. 240-247. ISSN 2229-838X

Abdullah, Abdul Rahim and Tee, Wei Hown and Yusoff, Mohd Rahimi (2019) Voltage Variation Analysis By Using Gabor Transform. International Journal Of Human And Technology Interaction (IJHATI), 3 (2). pp. 29-34. ISSN 2590-3551

Abdullah, Abdul Rahim and Too, Jing Wei and Mohd Ali, Nursabillilah and Tengku Zawawi, Tengku Nor Shuhada and Mohd Saad, Norhashimah (2019) Exploring The Relation Between EMG Pattern Recognition And Sampling Rate Using Spectrogram. Journal of Electrical Engineering and Technology, 14 (2). pp. 947-953. ISSN 1975-0102

Abdullah, Abdul Rahim and Too, Jing Wei and Mohd Saad, Norhashimah (2019) A New Quadratic Binary Harris Hawk Optimization For Feature Selection. Electronics (Switzerland), 8 (10). pp. 1-27. ISSN 2079-9292

Abdullah, Abdul Rahim and Too, Jing Wei and Mohd Saad, Norhashimah and Mohd Ali, Nursabillilah and Tengku Zawawi, Tengku Nor Shuhada (2019) Featureless EMG Pattern Recognition Based On Convolutional Neural Network. Indonesian Journal of Electrical Engineering and Computer Science, 14 (3). pp. 1291-1297. ISSN 2502-4752

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Hybrid Photovoltaic Thermal PVT Solar Systems Simulation Via Simulink/MATLAB. CFD Letters, 11 (4). 64 - 78. ISSN 2180-1363

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) A Review: Parameters Affecting The PVT Collector Performance On The Thermal, Electrical, And Overall Efficiency Of PVT System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 191-232. ISSN 2289-7879

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Technology Progress On Photovoltaic Thermal (PVT) Systems With Flat-Plate Water Collector Designs: A Review. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 59 (1). pp. 107-141. ISSN 2289-7879

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Thermal Efficiency And Heat Removal Factor For Hybrid Photovoltaic Thermal PVT System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58 (1). 51 - 61. ISSN 2289-7879

Abdullah, Muhammad Ilman Hakimi Chua and Othman, Aimanezmir and Abdullah, Rohana and Abdollah, Mohd Fadzli bin (2019) Optimization On The Nanoparticles Stability In Liquid Phased Condition By Using Taguchi Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 129-139. ISSN 2289-7879

Abdullah, Rohana and Abd Rahman, Md Nizam and Salleh, Mohd Rizal (2019) A Systematic Approach To Model Human System In Cellular Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 13 (1). pp. 1-11. ISSN 1881-3054

Abu Bakar, Mohd Hadzley and Abdul Manap, Muhamad Naim Fahmi and Tamin, Nor Fauzi and Azhar, Anis Afuza and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Md Ali, Mohd Amran and Shamsudin, Noorazizi and Mohamad Raffi, Nurul Fatin (2019) Surface Integrity Study For FC300 Cast Iron Using TiAIN Ball End Mill. Jurnal Tribologi, 21. pp. 35-46. ISSN 2289-7232

Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Al-Amani, Umar and Azhar, Anis Afuza and Mokhtar, Muhammad Faiz and Hamed, Muhammad Fitri Naim (2019) Effect Of Sintering Temperature On Density, Hardness And Tool Wear For Alumina-Zirconia Cutting Tool. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4648-4660. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Tamin, Nor Fauzi and Azhar, Anis Afuza and Mokhtar, Muhammad Faiz and Hamed, Muhammad Fitri Naim and Azlan, Umar Al-Amani (2019) Fabrication And Machining Performance Of Ceramic Cutting Tool Based On The Al2O3-ZrO2-Cr2O3 Compositions. Journal of Materials Research and Technology, 8 (6). pp. 5114-5123. ISSN 2238-7854

Abu Bakar, Norazhar and Muhammad Ridzuan, Nur Lidiya and Ab Ghani, Sharin and Sutan Chairul, Imran and Ab Aziz, Nur Hakimah (2019) Comparative study on the accelerated thermal aging behavior between palm and rapeseed natural ester oils. Bulletin Of Electrical Engineering And Informatics, 8 (3). pp. 735-743. ISSN 2302-9285

Ahamat, Amiruddin and Pillai, Tharuma Rajan (2019) Commodification Of Social Capital In Youth Entrepreneurship : A Critical Review Of Literature. The Turkish Online Journal Of Design, Art And Communication - Tojdac, SE. pp. 1999-2011. ISSN 2146-5193

Ahamat, Amiruddin and Shahkat Ali, Muhamad Sham (2019) Preference criteria for online shopping among university students. International Journal of Electronic Marketing and Retailing, 10 (3). pp. 244-259. ISSN 1741-1025

Ahmad, Asmala and Mohamad Hashim, Ummi Kalsom and Abd Wahid, R. and Sakidin, Hamzah and Sufahani, Suliadi Firdaus and Mat Amin, Abd Rahman and Abdullah, Mohd Mawardy and Quegan, Shaun (2019) Implementation Of Land Cover Change Detection Based On Supervised Classifications Of Multispectral Satellite Data For Leveraging Internet Of Things. ARPN Journal Of Engineering And Applied Sciences, 14 (10). pp. 1863-1870. ISSN 1819-6608

Ahmad, Asmala and Mohamad Hashim, Ummi Kalsom and Sakidin, Hamzah and Sufahani, Suliadi Firdaus and Mat Amin, Abd Rahman (2019) Monitoring Land Cover Changes In The Tropics Using Satellite Remote Sensing Data. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 3631-3636. ISSN 2278-3075

Ahmad, Asmala and Quegan, Shaun and Sufahani, Suliadi Firdaus and Sakidin, Hamzah and Abdullah, Mohd Mawardy (2019) Haze Effects On Satellite Remote Sensing Imagery And Their Corrections. International Journal of Advanced Computer Science and Applications, 10 (10). pp. 69-76. ISSN 2158-107X

Ahmad, Mohd Nazri and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Mohd Basir, Mohamad Faris (2019) Shrinkage Effect Of Vacuum Casting Process Parameters Using Taguchi Method. International Journal of Integrated Engineering, 11 (3). pp. 248-254. ISSN 2229-838X

Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Jumaidin, Ridhwan and Abu Hassan, Muhammad Afiq and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat (2019) Flow Analysis Of Five-Axis Impeller In Vacuum Casting By Computer Simulation. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 181-189. ISSN 2289-7879

Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Osman, Mohd Hairizal and Alis@Elias, Izzati Fatin (2019) A Complete Denture By Rapid Prototyping With Reverse Engineering Approach. International Journal of Mechanical and Mechatronics Engineering, 19 (3). pp. 50-57. ISSN 2227-2771

Ahmad, Mohd Riduan and Mohammad Sabri, Muhammad Haziq and Periannan, Dinesh and Abd. Aziz, Mohamad Zoinol Abidin and Mohd Esa, Mona Riza and Abdul‑Malek, Zulkurnain and Lu, Gaopeng and Zhang, Hongbo and Cooray, Vernon and Williams, Earle R. and Al-Kahtani, Ammar Ahmed and Ab. Kadir, Mohd Zainal Abidin (2019) Initial electric field changes of lightning flashes in tropical thunderstorms and their relationship to the lightning initiation mechanism. Atmospheric Research, 226. pp. 138-151. ISSN 0169-8095

Ahmad, Sabrina and Asmai, Siti Azirah and Zaid, Siti Sarah and Kama, Nazri (2019) Shopping Assistant App For People With Visual Impairment: An Acceptance Evaluation. International Journal of Computing, 18 (3). pp. 285-292. ISSN 2312-5381

Ahmad Khiar, Mohd Shahril and Lewin, Paul L. and Brown, Richard C. D. (2019) Sacrificial copper strip sensors for sulfur corrosion detection in transformer oils. Measurement: Journal of the International Measurement Confederation, 148. pp. 1-6. ISSN 0263-2241

Ahmad Nawir, Nur Amalina and Mohd Isira, Ahmad Sadhiqin and Basari, Amat Amir and Mohamed Yunus, ‪Noor Azlina (2019) Development of home appliances controller with DTMF signal. Journal of Telecommunication, Electronic and Computer Engineering, 11 (1). pp. 25-34. ISSN 2180-1843

Ahmad Radzi, Syafeeza and Piramli, Muhamad Marzuki and Wong, Yan Chiew and Abdul Hamid, Norihan and Ali, Nur Alisa and Mat Ibrahim, Masrullizam (2019) A Design Of License Plate Recognition System Using Convolutional Neural Network. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 2196-2204. ISSN 2088-8708

Ahmed, Yasir Hamad and Mohd Aboobaider, Burhanuddin and Abd Ghani, Mohd Khanapi and Elzamly, Abdelrafe and Doheir, Mohamed A. S. (2019) Identifying critical factors to adopt E-HRM based cloud computing system for healthcare organizations. International Journal of Advanced Science and Technology, 28 (8). pp. 30-46. ISSN 2005-4238

Ahsan, Qumrul and Mustafa, Zaleha and Ting, Carron Shuang Sia (2019) On The Use Of Nano Fibrillated Kenaf Cellulose Fiber As Reinforcement In Polylactic Acid Biocomposites. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4970-4988. ISSN 2289-4659

Akash, Omar M. and Syed Ahmad, Sharifah Sakinah and Azmi, Mohd Sanusi and Alkouri, Abd Ulazeez (2019) State-Of-The-Art In Image Clustering Based On Affinity Propagation. International Journal of Recent Technology and Engineering, 8 (1S5). 133 - 137. ISSN 2277-3878

Al Bowarab, Mustafa Hasan and Zakaria, Nurul Azma and Zainal Abidin, Zaheera (2019) Load Balancing Algorithms In Software Defined Network. International Journal Of Recent Technology And Engineering (IJRTE), 7 (6S5). pp. 686-692. ISSN 2277-3878

Al Ghafri, Hamed Hilal and Yusof, Robiah and Zainal Abidin, Zaheera and Kamil, Kurbonov (2019) Implementation Of Intrusion Detection System Using Snort. Journal Of Advanced Computing Technology And Application (JACTA), 1 (1). pp. 8-14. ISSN 2672-7188

Al Rashdi, Mubarak and Akmal, Suriati and Al-Shami, Samer Ali Hussein (2019) Knowledge Management And Organizational Performance: A Research On Systematic Literature. International Journal of Innovative Technology and Exploring Engineering, 8 (6S4). pp. 757-762. ISSN 2278-3075

Al-Ahnomi, Rammah Ali Hussien and Mohd Bahar, Amyrul Azual and Hussein Al-Heghazi, Ammar Abdullah and Zakaria, Zahriladha and Mohd Yussof, Zulkalnain and Tole, Sutikno (2019) Determination Of Solid Material Permittivity Using T-Ring Resonator For Food Industry. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 489-496. ISSN 1693-6930

Al-Ani, Mustafa Ayad Anwer and Abdollah, Mohd Faizal and Zakaria, Nurul Azma (2019) E-Government Adoption Success Factors And Their Weight Analysis: A Citizen Perspective. Journal Of Theoretical And Applied Information Technology, 97 (2). pp. 583-597. ISSN 1992-8645

Al-Gburi, Ahmed Jamal Abdullah and Mohd Ibrahim, Imran and Zakaria, Zahriladha and Khaleel, Aymen Dheyaa (2019) Bandwidth And Gain Enhancement Of Ultra-Wideband Monopole Antenna Using MEBG Structure. Journal of Engineering and Applied Sciences, 14 (10). pp. 3390-3393. ISSN 1816-949X

Al-Hammadi, Abdulhadi and Al-Hammadi, Abdulla and Al-Shami, Samer Ali Hussein and Sidek, Safiah (2019) Social Network Sites And Innovation Capabilities In The Uae Hotel Industry. Reliability And Normality Test. International Journal Of Innovative Technology And Exploring Engineering, 8 (6S4). pp. 775-779. ISSN 2278-3075

Al-Hiealy, Mohammed Rasheed Jubair and Omar, Rosli and Sulaiman, Marizan and Abd Halim, Wahidah (2019) Particle Swarm Optimization (PMO) Algorithm With Reduced Number Of Switches In Multilevel Inverter (MLI). Indonesian Journal Of Electrical Engineering And Computer Science, 14 (3). pp. 1114-1124. ISSN 2502-4752

Al-Hiealy, Mohammed Rasheed Jubair and Omar, Rosli and Sulaiman, Marizan and Alakkad Majeda, Moataz M.A. and Abd Halim, Wahidah (2019) Artificial intelligence technique to real-time based on selective harmonic elimination in modified multilevel inverter. Journal of Engineering and Applied Sciences (JEAS), 14 (24). pp. 9692-9700. ISSN 1816-949X

Al-Mhiqani, Mohammed Nasser Ahmed and Ahmad, Rabiah and Zainal Abidin, Zaheera and Abdulkareem, Karrar Hameed (2019) Review Of Cyber Attacks Classifications And Threats Analysis In Cyber-Physical Systems. International Journal of Internet Technology and Secured Transactions, 9 (3). pp. 282-298. ISSN 1748-569X

Al-Mhiqani, Mohammed Nasser Ahmed and Ahmad, Rabiah and Zainal Abidin, Zaheera and S.M.M Yassin, S.M. Warusia Mohamed and Hassan, Aslinda and Mohammad, Ameera Natasha (2019) New Insider Threat Detection Method Based On Recurrent Neural Networks. Indonesian Journal of Electrical Engineering and Computer Science, 17 (3). pp. 1474-1479. ISSN 2502-4752

Al-Shami, Samer Ali Hussein and Abdul Majid, Izaidin and Abdul Rashid, Nurulizwa and Abdul Raheem, Hayder Adil (2019) Women Micro And Small Business Sustainability In Malaysia Through Microcredit. International Journal of Recent Technology and Engineering (IJRTE), 8 (1S5). pp. 70-74. ISSN 2277-3878

Al-Shami, Samer Ali Hussein and Shahbodin, Faaizah and Che Ku Mohd, Che Ku Nuraini and Abdul Rashid, Nurulizwa and Jano, Zanariah (2019) Entrepreneurial Education On Entrepreneurial Intention Among School Teachers In Malaysia. OPCION, 35 (20). pp. 2899-2913. ISSN 1012-1587

Al-Shami, Samer Ali Hussein and Sidek, Safiah and Abdul Rashid, Nurulizwa and Al-Mamun, Abdullah (2019) Causes Of Failure Among Malaysian Female Entrepreneurs. Qualitative Research In Financial Markets, 12 (1). pp. 43-71. ISSN 1755-4179

Al-hammadi, Abdulla and Al-Hammadi, Abdulhadi and Abdul Rashid, Nurulizwa and Al-Shami, Samer Ali Hussein (2019) Halal Tourism Destination In UAE : The Opportunities, Threats And Future Research. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 788-793. ISSN 2278-3075

Algumaei, Mohammed Yahya and Edward, Nurhasniza and Shairi, Noor Azwan and Zakaria, Zahriladha and Abdullah, Mohammed Saghir Zobilah (2019) A Coupled-Line Balun For Ultra-Wideband Single-Balanced Diode Mixer. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). 246 - 252. ISSN 1693-6930

Ali, Md Isa and Mohd Jaafar, Faezah (2019) Relationships Derived from Physical Properties of Waste Cooking Oil / Diesel Blends and Biodiesel Fuels. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 191-203. ISSN 2289-7879

Ali @ Ibrahim, Fariz and Sintar, Junior and Mohd Aras, Mohd Shahrieel and Shukor, Ahmad Zaki (2019) Design and Construction of 4-DOF EMG-Based Robot Arm System. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 669-674. ISSN 2278-3075

Ali Mokhtar, Mohd Najib and Mohammed Zulkifly, Abdullah and Saad, Abdullah Aziz and Che Ani, Fakhrozi and Samsudin, Zambri (2019) Soldering Characteristics And Thermomechanical Properties Of Pb-Free Solder Paste For Reflow Soldering. Journal Of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 45-56. ISSN 1985-3157

Alseiari, Abdulrahman Mohammed Suliman and Sidek, Safiah and Al-Shami, Samer Ali Hussein (2019) The Moderation Role Of Transformational Leadership Between Human Capital And Organizational Innovation In Abu Dhabi Government. International Journal of Recent Technology and Engineering, 8 (3). pp. 7216-7222. ISSN 2277-3878

Ammar, Alhegazi and A. Alahnomi, Rammah and Shairi, Noor Azwan and Zakaria, Zahriladha and Sutikno, Tole and Abu-Khadrah, Ahmed Ismail (2019) Analysis And Investigation Of A Novel Microwave Sensor With High Q-Factor For Liquid Characterization. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (2). pp. 1065-1070. ISSN 1693-6930

Ananta, Gede Pramudya and Sedek, Muliati and Shahbodin, Faaizah and Che Amran, Aliza and Ruslan, Siti Nur Azrreen (2019) Computer-Assisted Intervention (CAI) To Enhance Mathematical Learning Of Autistic Students: A Case Study In Melaka. Humanities & Social Sciences Reviews, 7 (2). pp. 196-203. ISSN 2395-6518

Anawar, Syarulnaziah and Kunasegaran, Durga L. and Mas'ud, Mohd Zaki and Zakaria, Nurul Azma (2019) Analysis Of Phishing Susceptibility In A Workplace: A Big-Five Personality Perspectives. Journal of Engineering Science and Technology, 14 (5). pp. 2865-2882. ISSN 1823-4690

Anawar, Syarulnaziah and Zakaria, Nurul Azma and Mas'ud, Mohd Zaki and Muslim, Zulkiflee and Harum, Norharyati and Ahmad, Rabiah (2019) IoT Technological Development: Prospect And Implication For Cyberstability. International Journal Of Advanced Computer Science And Applications (IJASCA), 10 (2). pp. 428-437. ISSN 2158-107X

Ani, Mohammad Firdaus and Fukumi, Minoru and Kamat, Seri Rahayu and Minhat, Mohamad and Husain, Kalthom (2019) Development Of Driving Fatigue Strain Index Using Fuzzy Logic To Analyze Risk Levels Of Driving Activity. IEEJ Transactions on Electrical and Electronic Engineering, 14 (12). pp. 1764-1771. ISSN 1931-4973

Anwar Apandi, Nur Ilyana and Martin, Aerun (2019) The Integration of Fuzzy Logic System for Obstacle Avoidance Behavior of Mobile Robot. International Journal Of Electrical Engineering And Applied Sciences (IJEEAS), 2 (1). pp. 31-37. ISSN 2600-7495

Aqil, Muhtade Mustafa and Mohd Abid, Mohd Asyadi Azam and Latif, Rhonira (2019) Fabrication And Characterization Of Carbon Nanotube Channel On The Electrodes For The Development Of Resonant Gate Transistor. Nanoscience and Nanotechnology - Asia, 9 (1). 114 - 120. ISSN 2210-6812

Arbain, Nur Atikah and Azmi, Mohd Sanusi and Draman @ Muda, Azah Kamilah and Abd Aziz, Maslita and A. Jalil, Intan Ermahani (2019) State of the art in digital paleography. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). 246 - 250. ISSN 2278-3091

Arbain, Nur Atikah and Azmi, Mohd Sanusi and Muda, Azah Kamilah and Abdul Aziz, Maslita and A. Jalil, Intan Ermahani (2019) State Of The Art In Digital Paleography. International Journal Of Advanced Trends In Computer Science And Engineering, 8 (1.3). 246 - 250. ISSN 2278-3091

Asih, Hayati Mukti and Chong, Kuan Eng and Lee, Mei Ph’ng (2019) Simulation Of Mixed-Load Testing Process In An Electronic Manufacturing Company. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 408-416. ISSN 1693-6930

Asmai, Siti Azirah and Mohamad Zukhairin, Mohamad Nurallik Daniel and Mohamad Jaya, Abdul Syukor and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida (2019) Mosquito larvae detection using deep learning. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 804-809. ISSN 2278-3075

Asmai, Siti Azirah and Zainal Abidin, Zaheera and Basiron, Halizah and Ahmad, Sabrina (2019) An intelligent crisis-mapping framework for flood prediction. International Journal of Recent Technology and Engineering, 8 (2S8). pp. 1304-1310. ISSN 2277-3878

Attiah, Mothana Lafta and Awang Md Isa, Azmi and Zakaria, Zahriladha and Mohsen, Mowafak Khadom and Abdulhammed, Muhannad Kaml and Dinar, Ahmed Musa (2019) Joint QoE-based user association and efficient cell–carrier distribution for enabling fully hybrid spectrum sharing approach in 5G mmWave cellular networks. Wireless Networks, 25. pp. 5027-5043. ISSN 1022-0038

Attiah, Mothana Lafta and Mohsen, Mowafak Khadom and Zakaria, Zahriladha and Awang Md Isa, Azmi and Abdulhammed, Muhannad Kaml and Dinar, Ahmed Musa (2019) Independence and fairness analysis of 5G mmWave operators utilizing spectrum sharing approach. Mobile Information Systems, 2019. pp. 1-13. ISSN 1574-017X

Attiah, Mothana Lafta and Zakaria, Zahriladha and Awang Md Isa, Azmi and Abdulhammed, Muhannad Kaml and Mohsen, Mowafak Khadom and Ali, Ihab (2019) A survey of mmWave user association mechanisms and spectrum sharing approaches: an overview, open issues and challenges, future research trendS. Wireless Networks, 26 (4). pp. 2487-2514. ISSN 1022-0038

Awangku Jaya, Awangku Khairul Ridzwan and Syahid, S. and Azahar, Arman Hadi and Mohamed Kassim, Anuar (2019) Evaluation Study An Automatic Capture Of Glucose Level By Using Glucose Sensor For Collecting Vital Sign Data. International Journal of Human and Technology Interaction, 3 (1). pp. 31-38. ISSN 2590-3551

Azahar, Arman Hadi and Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Zainal Abidin, Amar Faiz and Mohd Nor, Rozilawati and Ismail, Muhammad Azizi and Nor Shah, Mohd Badril (2019) Development Of Automatic Poultry System (Quails) Using Arduino Microcontroller. International Journal Of Recent Technology And Engineering (IJRTE), 8 (3). pp. 3019-3024. ISSN 2277-3878

Azahari, Norzailan and Putra, Azma and Mat Dan, Reduan and Othman, Muhammad Nur (2019) Sound Insulation Performance Of Kenaf Fibre As A Noise Control Treatment In Car Using Statistical Energy Analysis. Defence S And T Technical Bulletin, 12 (1). 126 - 139. ISSN 1985-6571

Azmi, Aimie Nazmin and Salim, Norhafiz and Khamis, Aziah (2019) Analysis Of An Energy Storage Sizing For Grid-Connected Photovoltaic System. Indonesian Journal Of Electrical Engineering And Computer Science, 16 (1). pp. 17-24. ISSN 2502-4752

Azmi, Aini Khairani and Abdullah, Noraswaliza and Emran, Nurul Akmar (2019) A collaborative filtering recommender system model for recommending intervention to improve elderly well-being. International Journal of Advanced Computer Science and Applications, 10 (6). 131 - 138. ISSN 2158-107X

Azmi, Ezzatul Farhain and Hussin, Nor Hafizah and Syed Ahmad, Sharifah Sakinah and Mohd Said, Rahaini and Samsudin, Adam (2019) Assessment Of Aboveground Biomass And Temperature In The Tropical Rainforest Of Malaysia. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 1888-1891. ISSN 2278-3075

Azmi, Ezzatul Farhain and Ishak, Muhammad Firdaus and Samsudin, Adam and Zainal Abidin, Amar Faiz and Kadiran, Kamaru Adzha (2019) E-Water Level: Educational Kit For Testing Student Knowledge On Transient Response Using Water Level Control. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 4851-4856. ISSN 2278-3075

Bahar, Mohd Bazli and Mohd Aras, Mohd Shahrieel and Lim, Zhi Han and Ho, Gui Yan and Teo, Seng Long and Sulaiman, Marizan and Abdul Azis, Fadilah (2019) Design analysis of compact autonomous railway inspection vehicle (CARIV). International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 501-507. ISSN 2278-3075

Bani Hashim, Ahmad Yusairi (2019) Using worn out insole to express human foot. International Journal Of Biomedical Engineering And Technology, 29 (1). pp. 84-99. ISSN 1752-6418

Bani Hashim, Ahmad Yusairi and Shukor, Ahmad Zaki and Shamsuddin, Syamimi and Kamsani, Silah Hayati and Mat Ali, Mahasan (2019) Simulation and reproduction of a manipulator according to classical arm representation and trajectory planning. Advances in Science, Technology and Engineering Systems, 4 (6). pp. 158-162. ISSN 2415-6698

Bany Melhem, Laith Nazeeh and Arbain, Nur Atikah and Azmi, Mohd Sanusi and Muda, Azah Kamilah and A. Jalil, Intan Ermahani and Ramdan, Jabril (2019) Frame removal for mushaf Al-Quran using irregular binary region. International Journal Of Advanced Trends In Computer Science And Engineering, 8 (1.3). 109 - 114. ISSN 2278-3091

Basari, Amat Amir and Ng, Xue Yan and Kok, Swee Leong and Ahmad Nawir, Nur Amalina (2019) Piezoelectric energy harvesting system via impact and vibration – A review. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 11 (1). pp. 35-41. ISSN 2180-1843

Boejang, Hambali and Arep @ Ariff, Hambali and Hassan, Muhammad Zahir and Esa, Saharudin (2019) Dealing with project characteristics through concurrent product development by Malaysian car producer. International Journal of Emerging Trends in Engineering Research, 7 (12). pp. 784-789. ISSN 2347-3983

Chai, Mau Shern and Chong, Shin Horng and Jaafar, Hazriq Izzuan and Chong, Chee Soon and Ghazali, Rozaimi and Md Sam, Yahaya (2019) Performance Analysis of Position Tracking Control With PID Controller Using An Improved Optimization Technique. International Journal Of Mechanical Engineering And Robotics Research, 8 (3). pp. 401-405. ISSN 2278-0149

Che Amran, Aliza and Mohamad Saleh, Saleha and Abdul Kadir, Ahmad Muzaffar and Zainal, Ahmad Shukri and Mohd Nor, Rozilawati and Md. Rozali, Sahazati and Fauzi, Ahmad Hadinata (2019) Analysis Of Light Bulb Temperature Control For Egg Incubator Design. International Journal of Integrated Engineering, 11 (4). pp. 268-276. ISSN 2229-838X (Unpublished)

Che Aziz, Siti Asma and Kadmin, Ahmad Fauzan and Rahim, Norain and Wan Hassan, Wan Haszerila and Abd Aziz, Ihsan Fikri and Hamid, Mohd Saad and Hamzah, Rostam Affendi (2019) Development Of Automatic Healthcare Instruction System Via Movement Gesture Sensor For Paralysis Patient. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1676-1682. ISSN 2088-8708

Che Ku Mohd, Che Ku Nuraini and Rosli, Zareena and Suparjoh, Suriawati and Shahbodin, Faaizah (2019) Early Screening Tool For Autism Spectrum Disorder For Visual Impairments. ARPN Journal Of Engineering And Applied Sciences, 14 (22). pp. 3847-3851. ISSN 1819-6608

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Abdul Rashid, Nurulizwa and Jano, Zanariah and Al-Shami, Samer Ali Hussein (2019) Social Entrepreneurship Among Students With Disabilities For Special Education Community Using Digital Technology. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 675-679. ISSN 2277-3878

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Ananta, Gede Pramudya and Mohd Noor, Helmi Adly and Sedek, Muliati (2019) Using Interactive Games To Engage Children With Autism On Visual Impairment. International Journal of Recent Technology and Engineering, 8 (3). pp. 5995-5999. ISSN 2277-3878

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Meylinda Maria, Meylinda Maria and Sedek, Muliati and Mohamad, Siti Nurul Mahfuzah (2019) Integrating An Instructional Design Model In Video Development For Autism Spectrum Disorder. International Journal of Engineering and Advanced Technology, 9 (1). pp. 445-448. ISSN 2249 – 8958

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Suparjoh, Suriawati and Che Amran, Aliza and Mohd Noor, Helmi Adly (2019) Early Stage In Identifying Autism Spectrum Disorder (ASD) Through Screening And Diagnosis. International Journal Of Recent Technology And Engineering (IJRTE), 8 (4). pp. 660-663. ISSN 2277-3878

Che Ku Mohd, Che Ku Nuraini and Shahbodin, Faaizah and Suparjoh, Suriawati and Muhamad Khidir, Nur Alya Sahira (2019) Application Of Augmented Reality In Learning Bakery For Autism Spectrum Disorder. International Journal of Engineering and Advanced Technology, 9 (1). pp. 2616-2620. ISSN 2249–8958 (Unpublished)

Cheng, See Yuan and Chin, Kwang Yhee and Mansor, Shuhaimi (2019) Yaw Angle Effect On The Aerodynamic Performance Of Hatchback Vehicle Fitted With Wing Spoiler. Malaysian Journal Of Fundamental And Applied Sciences, 15 (3). pp. 389-393. ISSN 2289-5981

Cheng, See Yuan and Chin, Kwang Yhee and Mansor, Shuhaimi and Abd Rahman, Abd Basid (2019) Experimental Study Of Yaw Angle Effect On The Aerodynamic Characteristics Of A Road Vehicle Fitted With A Rear Spoiler. Journal of Wind Engineering and Industrial Aerodynamics, 184. pp. 305-312. ISSN 01676105

Cheng, See Yuan and Hong, Mun Hoh and Lim, Kim Chuan (2019) Numerical Modelling Of Synthetic-Jet-Assisted Mixing. CFD Letters, 11 (4). pp. 16-31. ISSN 2180-1363

Cheong, Kar Mee and Salam, Sazilah and Ithnin, Fazidah and Abdul Bareed, Nurhidayah and Jano, Zanariah and Suraidi, N. (2019) Motivational factors among undergraduates learning mandarin: a qualitative perspective. International Journal of Academic Research in Progressive Education and Development, 8 (2). pp. 187-199. ISSN 2226-6348

Chin, Kim Gan and Shamshiri, Meysam and Baharin, Kyairul Azmi and Mohd Azman, Mohd Arif (2019) IOT-based electricity energy monitoring system at Universiti Teknikal Malaysia Melaka. Bulletin Of Electrical Engineering And Informatics, 8 (2). pp. 683-689. ISSN 2089-3191

Chow, Khoon Keat and Abdal Kadhim, Ali Mohammed and Kok, Swee Leong and Lau, Kok Tee (2019) Finite Elements Method Simulation Of P(VDF-TrFE) Piezoelectric Sensor For Internet Of Things Application. The International Journal of Integrated Engineering, 11 (1). 77 - 83. ISSN 2229-838X

Dhar Malingam, Sivakumar and Ng, Lin Feng and Selamat, Mohd Zulkefli and Mustafa, Zaleha and Bapokutty, Omar (2019) A comparison study on the mechanical properties of composites based on kenaf and pineapple leaf fibres. Polymer Bulletin, 77 (3). pp. 1449-1463. ISSN 0170-0839

Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Ali, Mohd Basri and Bapokutty, Omar (2019) The influence of fibre stacking configurations on the indentation behaviour of pineapple leaf / glass fibre reinforced hybrid composites. Defence S and T Technical Bulletin, 12 (1). pp. 113-123. ISSN 1985-6571

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Bapokutty, Omar (2019) The effects of stacking configuration on the response of tensile and quasi-static penetration to woven kenaf/glass hybrid composite metal laminate. Polymer Composites, 40 (2). pp. 568-577. ISSN 0272-8397

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Sheikh Md Fadzullah, Siti Hajar and Subramonian, Sivarao (2019) Mechanical properties of plain woven kenaf/glass fiber reinforced polypropylene hybrid composites. Materialpruefung/Materials Testing, 61 (11). pp. 1095-1100. ISSN 0025-5300

Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Mustafa, Zaleha and Zakaria, Kamarul Ariffin and Subramonian, Sivarao (2019) Mechanical properties of cross-ply banana-glass fibre reinforced polypropylene composites. Defence S and T Technical Bulletin, 12 (1). pp. 124-135. ISSN 1985-6571

Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Razali, Nadlene (2019) Quasi and dynamic impact performance of hybrid cross-ply banana/glass fibre reinforced polypropylene composites. Materials Research Express, 6 (12). pp. 1-9. ISSN 2053-1591

Dhar Malingam, Sivakumar and Zulkafli, Norizzati and Sheikh Md Fadzullah, Siti Hajar and Zakaria, Kamarul Ariffin and Mustafa, Zaleha and Subramonian, Sivarao (2019) Effect of water absorption on the mechanical properties of cross-ply hybrid pseudo- stem banana/glass fibre reinforced polypropylene composite. Materials Research Express, 6 (9). pp. 1-13. ISSN 2053-1591

Din, Asri and Abdullah, Abdul Rahim and Mohamed Piah, Mohamed Afendi and Kasri, Nur Faizal (2019) Surface roughness condition of field-aged polymer insulators at different installation area. Indonesian Journal of Electrical Engineering and Computer Science, 15 (2). pp. 600-608. ISSN 2502-4752

Dzakiyullah, Nur Rachman and M.A., Burhanuddin and Raja Ikram, Raja Rina and Mohd Khanapi, Abd Ghani and Setyonugroho, Winny (2019) Machine learning methods for diabetes prediction. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 2199-2205. ISSN 2278-3075

Ebrahim, Zuhriah and Ahmad, Nurul Aini and Muhamad, Mohd Razali (2019) A model for manufacturing sustainability in manufacturing operations. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 49-55. ISSN 2277-3878

Edward, Nurhasniza and Shairi, Noor Azwan and Saiful Bahri, Ika Dewi and Zakaria, Zahriladha (2019) Analysis Of Switching And Matching Stubs In Reconfigurable Power Divider With SPDT Switch Function. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 86-94. ISSN 1693-6930

Edward, Nurhasniza and Shairi, Noor Azwan and Saiful Bahri, Ika Dewi and Zakaria, Zahriladha and Sutikno, Tole (2019) Tunable Function Of Feeding Network And SPDT Switch For WIMAX Application. Indonesian Journal Of Electrical Engineering And Computer Science, 14 (3). pp. 1582-1588. ISSN 2502-4752

El Tawil, Naji Ammar Mansour and Sulaiman, Marizan and Shamshiri, Meysam and Ibrahim, Zulkifilie (2019) Optimum allocation of capacitor and DG in MV distribution network using PSO and opendss. ARPN Journal Of Engineering And Applied Sciences, 14 (2). pp. 363-371. ISSN 1819-6608

Elden, Nail Zaki and Abdul Hamid, Mohd Syaiful Rizal and Chew, Boon Cheong and Al-Shami, Samer Ali Hussein and Elzamly, Abdelrafe and Doheir, Mohamed A. S. (2019) New theoretical framework corporate social responsibility: The case of Islamic development bank’s sustainable social program. Opcion, 35 (21). pp. 2899-2929. ISSN 1012-1587

Fam, Soo Fen and Husseini, Saleh Ali (2019) Integrating TQM Practices And Knowledge Management To Enhance Malaysian Digital Banking. Opcion, 35 (89). pp. 2899-2921. ISSN 2477-9385

Fam, Soo Fen and Ismail, Noriszura and Shinyie, Wendy Ling (2019) The Magnitude Of Big Data 5VS In Business Macroclimate. International Journal of Recent Technology and Engineering, 8 (1S5). pp. 497-503. ISSN 2277-3878

Fam, Soo Fen and Laham, Jamaliah and Sapak, Zaiton and Zun, Liang Chuan and Ahamat, Amiruddin and Wan Zin, Wan Zawaiah and Suhartono, Suhartono (2019) Factors Influencing Malaysian Pineapple Smallholders Intention To Adopt MyGAP And MPIB Roles To Inspire The Growers To Obtain MyGAP Certification. Humanities and Social Sciences Reviews, 7 (2). pp. 315-321. ISSN 2395-6518

Fam, Soo Fen and Saleh, Ali Husseini and Ahmat, Norun Najjah and Azmi, Fadhlur Rahim and Prastyo, Dedy Dwi and Yanto, Heri (2019) Islamic Banking Revolution In Malaysia: A Review. Humanities & Social Sciences Reviews, 7 (4). pp. 267-275. ISSN 2395-6518

Fam, Soo Fen and Siah, Jia Wen (2019) Service Quality Of Self-Checkout Technology In Malaysian Retail Industry. International Journal of Recent Technology and Engineering, 8 (1S5). pp. 179-184. ISSN 2277-3878

Feroz, Farah Shahnaz and Leicht, Gregor and Rauh, Jonas and Mulert, Christoph (2019) The Time Course Of Dorsal And Rostral-Ventral Anterior Cingulate Cortex Activity In The Emotional Stroop Experiment Reveals Valence And Arousal Aberrant Modulation In Patients With Schizophrenia. Brain Topography, 32. pp. 161-177. ISSN 0896-0267

Fitri Marisa, Fitri Marisa and Fachrudin, Fachrudin and Syed Ahmad, Sharifah Sakinah and Mohd Yusoh, Zeratul Izzah and Aziz, Tubagus Mohammad Akhriza (2019) Segmentation Model Of Customer Lifetime Value In Small And Medium Enterprise (SMEs) Using K-Means Clustering And LRFM Model. The International Journal of Integrated Engineering, 11 (3). pp. 169-180. ISSN 2600-7916

Gan, Chin Kim and Jabawi, Hayder Salah Mohammed and Baharin, Kyairul Azmi (2019) Performance evaluation of various solar photovoltaic module technologies under tropical climate conditions at Melaka, Malaysia. Journal Of Engineering And Applied Sciences, 14 (2). pp. 336-341. ISSN 1816-949X

Ghazali, Mariyam Jameelah and Yusuf, Yusliza and Abdollah, Mohd Fadzli bin and Otsuka, Yuichi and Morakul, Sarita and Nakamura, Susumu and Ohnuma, Kiyoshi (2019) Wettability characteristics of laser surface textured plasma sprayed TiO2/ZnO coatings. Tribology Online, 14 (5). pp. 279-284. ISSN 1881-2198

Ghazali, Rozaimi and Ab Ghani, Mohd Ruddin and Ahmad Izzuddin, Tarmizi and Mohd Fuad, Mohamad Aqil and Sulaima, Mohamad Fani and Jano, Zanariah and Sutikno, Tole (2019) Detection of Aedes aegypti larvae using single shot multibox detector with transfer learning. Bulletin Of Electrical Engineering And Informatics, 8 (2). pp. 514-518. ISSN 2089-3191

Ghazali, Rozaimi and Chai, Mau Shern and Chong, Chee Soon and Md. Sam, Yahaya and Rahmat, Mohd Fua'ad (2019) Position Tracking Performance for ElectroHydraulic Actuator System With The Presence of Actuator Internal Leakage. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 11 (1). pp. 21-24. ISSN 2180-1843

Ghazali, Rozaimi and Chai, Mau Shern and Chong, Shin Horng and Chong, Chee Soon and Jaafar, Hazriq Izzuan (2019) Optimization Techniques In PID Controller On A Nonlinear Electro-Hydraulic Actuator System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 56 (2). pp. 296-303. ISSN 2289-7879

Ghazali, Rozaimi and Chong, Shin Horng and Chong, Chee Soon and Yusof, Ahmad Anas and Chai, Mau Shern and Md Sam, Yahaya and Yusof, Ahmad Anas (2019) Comparison Of Fractional Order PID Controller And Sliding Mode Controller With Computational Tuning Algorithm. Universal Journal of Electrical and Electronic Engineering, 6 (4). pp. 181-190. ISSN 2332-3280

Ghazali, Rozaimi and Mohd Fuad, Mohamad Aqil and Ab Ghani, Mohd Ruddin and Ahmad Izzuddin, Tarmizi and Sulaima, Mohamad Fani and Jano, Zanariah and Sutikno, Tole (2019) Detection Of Aedes Aegypti Larvae Using Single Shot Multibox Detector With Transfer Learning. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 514-518. ISSN 2089-3191

Hairi, Mohd Hendra and Kamarudin, Muhammad Nizam and Mohd Isira, Ahmad Sadhiqin and Hanaffi, Farhan and Ab Rahman, Azhan (2019) Design And Modelling Of Single-Phase Grid-Connected Photovoltaic At Low Voltage Network Using PSCAD Software. International Journal Of Electrical Engineering And Applied Sciences (IJEEAS), 2 (1). pp. 1-6. ISSN 2600-7495

Hairi, Mohd Hendra and Mohd Zambri, Mohd Khairi and Hanaffi, Farhan and Ab Rahman, Azhan and Kamarudin, Muhammad Nizam (2019) Design and modelling of a three-phase grid-connected photovoltaic for low voltage network using PSCAD software. International Journal Of Electrical Engineering And Applied Sciences (IJEEAS), 2 (1). pp. 7-12. ISSN 2600-7495

Halim, Isa and Radin Umar, Radin Zaid and Syed Mohamed, Muhammad Syafiq and Ahmad, Nadiah and Padmanathan, Vinothini and Saptari, Adi (2019) The Influence Of Hand Tool Design On Hand Grip Strength: A Review. International Journal of Integrated Engineering, 11 (6). 053-069. ISSN 2229-838X

Hamid, Erman and Bahaman, Nazrulazhar and Jaafar, Azizah and Ang, Mei Choo and Abdul Malek, Akhdiat (2019) Development of home network sustainable interface tools. International Journal Of Advanced Computer Science And Applications (IJASCA), 10 (2). pp. 72-76. ISSN 2158-107X

Hamid, Mohd Saad and Abd Wahab, Muhammad Amirul and Abdullah, Rasyidah and Abd Gani, Shamsul Fakhar and Hamzah, Rostam Affendi (2019) Development Of Water Quality Monitoring For Smart Aquaculture System. Journal Of Engineering And Applied Sciences, 14 (9). pp. 2840-2847. ISSN 1816-949X

Hamid, Mohd Saad and Abd Wahab, Muhammad Amirul and Abdullah, Rasyidah and Abd Gani, Shamsul Fakhar and Hamzah, Rostam Affendi (2019) Development Of Water Quality Monitoring For Smart Aquaculture System. Journal Of Engineering And Applied Sciences, 14 (9). pp. 2840-2847. ISSN 1816-949X

Hamzah, Rostam Affendi and Gan, Melvin Yeou Wei and Nik Anwar, Nik Syahrim (2019) Stereo Matching Based On Absolute Differences For Multiple Objects Detection. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 261-267. ISSN 1693-6930

Haroon, Hazura and Abu Mansor, Abdul Aziz and Abdul Razak, Hanim and Idris, Siti Khadijah and Mohd Zain, Anis Suhaila and Salehuddin, Fauziyah (2019) Experimental Performance Analysis Of Macrobending Loss Characteristics In Polymer Optical Fiber. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 14 (1). pp. 1-7. ISSN 2462-1943

Haroon, Hazura and Neamah, Watheq Abdulkareem (2019) Statistical Analysis On Impact Of Temperature To Fiber Bragg Grating Sensor Performance. Optoelectronics And Advanced Materials – Rapid Communications, 13 (5-6). pp. 290-294. ISSN 1842-6573

Harum, Norharyati and Zakaria, Nurul Azma and Emran, Nurul Akmar and Ayop, Zakiah and Anawar, Syarulnaziah (2019) Smart book reader for visual impairment person using IoT device. International Journal Of Advanced Computer Science And Applications (IJASCA), 10 (2). pp. 251-255. ISSN 2158-107X

Harun, Mohamad Haniff and Mohd Ab. Halim, Mohd Firdaus and Azahar, Arman Hadi and Yaakub, Muhamad Faizal and Md Basar, Mohd Farriz and Zainal Abidin, Amar Faiz and Mohd Aras, Mohd Shahrieel (2019) Performance Analysis Of Liquid-Cooled Panel System For Air Conditioner Using Peltier Effect. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 31-42. ISSN 2289-7879

Harun, S W and Abdul Latiff, Anas and Rosol, A H A and Abdul Khudus, M I M (2019) Nanosecond Pulses Generation With Rose Gold Nanoparticles Saturable Absorber. Indian Journal Physics, 94 (7). pp. 1079-1083. ISSN 0973-1458

Harun, Sulaiman Wadi and Ab Rahman, Mohd Fauzi and Baharom, Mohamad Faizal and Mohd Rusdi, Muhammad Farid and Dimyati, Kaharudin and Pinninty, Harshavardhan Reddy and Paul, Mukul Chandra and Das, Shyamal and Dhar, Anirban and Abdul Latiff, Anas and Wang, Pengfei (2019) Titanium dioxide fiber saturable absorber for Q-switched fiber laser generation in the 1-micrometer region. Applied Optics, 58 (13). pp. 3495-3500. ISSN 1559-128X

Harun, Sulaiman Wadi and Ahmad, Muhammad Taufiq and Mohd Rusdi, Muhammad Farid and Zakaria, Rozalina and Zainuddin, Nur A.M. and Ahmad, Hijaz and Abdul Latiff, Anas and Jafry, Afiq Arif Aminuddin and Arof, Hamzah (2019) Q-Switched Erbium-Doped Fiber Laser Using Silver Nanoparticles Deposited Onto Side-Polished D-Shaped Fiber By Electron Beam Deposition Method. Optical Fiber Technology, 53. pp. 1-8. ISSN 1068-5200

Harun, Sulaiman Wadi and Baharom, Mohamad Faizal and Ab Rahman, Mohd Fauzi and Abdul Latiff, Anas and P Wang, P Wang (2019) Lutetium (III) oxide film as passive mode locker device for erbium-doped fibre laser cavity. Optics Communications, 446. pp. 51-55. ISSN 0030-4018

Harun, Sulaiman Wadi and Dutta, Debjit and Paul, Mukul Chandra and Dhar, Anirban and Das, Shyamal K. and Mohd Rusdi, Muhammad Farid and Abdul Latiff, Anas and Ahmad, Harith (2019) Newly developed chromium-doped fiber as a saturable absorber at 1.55- and 2.0-µm regions for Q-switching pulses generation. Optical Fiber Technology, 48. pp. 144-150. ISSN 1068-5200

Harun, Sulaiman Wadi and Yasin, Moh and Ab Rahman, Mohd Fauzi and Abdul Latiff, Anas (2019) Q-Switched And Mode-Locked Thulium Doped Fiber Lasers With Nickel Oxide Film Saturable Absorber. Optics Communications, 447. pp. 6-12. ISSN 0030-4018

Harun, Sulaiman Wadi and Yasin, Moh and Ab Rahman, Mohd Fauzi and Shakir Al-Hiti, Ahmed and Yupapin, Preechap Promphan (2019) Holmium Oxide Thin Film As A Saturable Absorber For Generating Q-Switched And Mode-Locked Erbium-Doped Fiber Lasers. Optical Fiber Technology, 52. pp. 1-7. ISSN 1068-5200

Harun, Sulaiman Wadi and Yasin, Moh and Md Johari, Md Ashadi and Abdul Rahim, Hazli Rafis and Jali, Mohd Hafiz and Mohd Yusof, Haziezol Helmi and Thokchom, Siddharth (2019) Optimization of sensing performance factor (γ) based on microfiber-coupled ZnO nanorods humidity scheme. Optical Fiber Technology, 52. pp. 1-11. ISSN 1068-5200

Hasan Alhammadi, Ibraheem Hasan Thani and Sidek, Safiah and Al-Shami, Samer Ali Hussein (2019) The Role Of Strategic Talent Management (STM) To Enhance Jobs Performances In Oil & Gas Companies In The UAE : A Conceptual Framework. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (6S4). pp. 749-756. ISSN 2278-3075

Hashim, Hanizam and Salleh, Mohd Shukor and Omar, M.Z. and Sulong, A.B. (2019) Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite. Journal Of Alloys And Compounds, 788. pp. 83-90. ISSN 0925-8388

Hashim, Hanizam and Salleh, Mohd Shukor and Omar, Mohd Zaidi (2019) Homogenous Dispersion And Interfacial Bonding Of Carbon Nanotube Reinforced With Aluminum Matrix Composite: A Review. Reviews On Advanced Materials Science, 58 (1). pp. 295-303. ISSN 1605-8127

Hashim, Norlezah and Idris, Fakrulradzi and Kadmin, Ahmad Fauzan and Jaapar Sidek, Siti Suhaila (2019) Automatic Traffic Light Controller For Emergency Vehicle Using Peripheral Interface Controller. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1788-1794. ISSN 2088-8708

Hassan, Ali Abdul Hussian and Othman, Mohd Fairuz Iskandar and Md Shah, Wahidah and Husien, Ali Mohamed and Hassan, Hayder Abdul Hussien (2019) An Improved LEACH Algorithm Based On Fuzzy C-Means Algorithm And Distributed Cluster Head Selection Mechanism. International Journal Of Advanced Science And Technology, 28 (1). pp. 406-415. ISSN 2005-4238

Hassan, Ali Abdul-hussian and Md Shah, Wahidah and Husien, Ali Mohamed and Talib, Mohammed Saad and Mohammed, Ali Abdul Jabbar and Othman, Mohd Fairuz Iskandar (2019) Clustering Approach In Wireless Sensor Networks Based On K-Means: Limitations And Recommendations. International Journal of Recent Technology and Engineering, 7 (6S5). pp. 119-126. ISSN 2277-3878

Hassan, Aslinda and Md Shah, Wahidah and Harum, Norharyati and Bahaman, Nazrulazhar and Mansourkiaie, F. (2019) The development of an automated irrigation system using an open source microcontroller. International Journal Of Human And Technology Interaction (IJHaTI), 3 (1). pp. 101-107. ISSN 2590-3551

Hassan, Nornikman and Zakaria, Zahriladha and Sam, Weng Yik and Mohd Hanapiah, Izyan Nazihah and Mohamad, A.Nasoruddin and Roslan, Ameer Farhan and Ahmad, Badrul Hisham and Ismail, Mohd Khairy and Abd. Aziz, Mohamad Zoinol Abidin (2019) Design Of Dual-Band Microstrip Patch Antenna With Right-Angle Triangular Aperture Slot For Energy Transfer Application. International Journal Of RF And Microwave Computer-Aided Engineering, 29 (1). pp. 1-11. ISSN 1096-4290

Hussain, Jawad and Sundaraj, Kenneth and M. Subramaniam, Indra Devi and Lam, Chee Kiang (2019) Analysis Of Fatigue In The Three Heads Of The Triceps Brachii During Isometric Contractions At Various Effort Levels. Journal of Musculoskeletal Neuronal Interactions, 19 (3). 276 - 285. ISSN 1108-7161

Hussin, Hanipah and Khoo, Nee kah and Abdullah, Norida (2019) Occupational Safety And Health (O.S.H) Towards Green Environment Practices At Malaysia Small And Medium Manufacturing Sector. International Journal Of Engineering & Technology, 8 (1.1). pp. 71-79. ISSN 2227-524X

Hussin, Hanipah and Pang, Yee Jiea and Raja Rosly, Raja Norhafiza and Omar, Siti Rohana (2019) Integrated 21st Century Science, Technology, Engineering, Mathematics (STEM) Education Through Robotics Project-Based Learning. Humanities & Social Sciences Reviews, 7 (2). pp. 204-211. ISSN 2395-6518

Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Zakaria, Azrul Abidin and Jumaidin, Ridhwan and Mansor, Muhd Ridzuan and Mohammad Taha, Mastura (2019) Fully Automatic Solar Powered Oil-Water Separation System For Grease Trap Controlled By Arduino: A Conceptual Design. International Journal of Recent Technology and Engineering, 8 (4). pp. 1266-1271. ISSN 2277-3878

Hussin, Mohamed Saiful Firdaus and Omar, Mohammad Rafi and Azlan, Khairul Azri and Azahar, Arman Hadi and Ismail, Zulkefli and Rosli, Fatin Farhana (2019) Orthopedic Calf Cast Using Antioxidative FS3200PA Nylon 3D Printing: Design And Optimization. ARPN Journal of Engineering and Applied Sciences, 14 (23). pp. 4093-4096. ISSN 1819-6608

Ibrahim, Irwan and Ismail, Albert Feisal and Amer, Afizan and Md. Jani, Siti Hajar (2019) The Effectiveness Of Mass Marketing Communication As A Digital Logistics Tools In Promoting A New Online Public Service Platform. International Journal of Supply Chain Management, 8 (4). pp. 177-185. ISSN 2051-3771

Ibrahim, Khairul Anwar and Gan, Chin Kim and Mau, Teng Au (2019) A methodology for technical losses estimation of radial distribution feeder. Indonesian Journal Of Electrical Engineering And Computer Science, 16 (3). pp. 1126-1135. ISSN 2502-4752

Idris, Ariff and Ismail, Mahamod and Nordin, Rosdiadee and Baharon, Mohd Rizuan and Azzam, Nurfatihah and Jaya Kumar, Yogan and Raja Ikram, Raja Rina and Hasan Basari, Abd Samad and Abdul Hamid, Mohd Hakim and Salahuddin, Lizawati (2019) Ad hoc on-demand distance vector (AODV) routing protocol invehicular ad hoc network (VANET): An analysis study. International Journal of Advanced Science and Technology, 28 (8). pp. 447-456. ISSN 2005-4238

Idris, Ariff and Ismail, Mahamod and Nordin, Rosdiadee and Hamdan, Muhammad Hasif and Abdul Hamid, Mohd Hakim and Salahuddin, Lizawati and Baharon, Mohd Rizuan and Abdullah, Nurlisa Loke and Hasan Basari, Abd Samad and Raja Ikram, Raja Rina (2019) The bluetooth and GPS tracking system: Comparison and analysis of technique. International Journal of Advanced Science and Technology, 28 (8). pp. 434-446. ISSN 2005-4238

Idris, Fakrulradzi and Hashim, Norlezah and Kadmin, Ahmad Fauzan and Lee, Boon Yee (2019) Intelligent Fire Detection And Alert System Using LabVIEW. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1842-1849. ISSN 2088-8708

Idris, Muhammad Idzdihar and Mohammed Napiah, Zul Atfyi Fauzan and Zainudin, Muhammad Noorazlan Shah and Mohd Chachuli, Siti Amaniah and Rashid, Marzaini (2019) Characterization Of SiO2/SiC Interface Of Phosphorous-Doped MOS Capacitors By Conductance Measurements. International Journal of Recent Technology and Engineering, 8 (3). pp. 5505-5508. ISSN 2277-3878

Idris, Norain and Saadon, Intan Mastura and Mohd Azize, Aziean and Zakaria, Muhammad Zulfattah (2019) Electrical production cost of young coconut waste pellet by using mini pellet mill - A feasibility study. Indonesian Journal of Electrical Engineering and Computer Science, 18 (2). pp. 599-606. ISSN 2502-4752

Ifayefunmi, Olawale and Wang, Sheng Hue and Mahidan, Fairuz Mardhiah (2019) Buckling Of Cones With Imperfect Length Subjected To Axial Compression. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (4). pp. 219-228. ISSN 2249-6890

Ifayefunmi, Olawale Friday and Ismail, Mohd Shahrom and Sheikh Md Fadzullah, Siti Hajar (2019) Buckling Of Imperfect Cylinder-Cone-Cylinder Transition Under Axial Compression. Thin-Walled Structures, 144. 01-11. ISSN 0263-8231

Ilyas, R.A. and Sapuan, S.M. and Ibrahim, Rushdan and Jumaidin, Ridhwan and Abral, Hairul and Ishak, M. R and Zainudin, Edi Syams and Mahmud, Siti Nur Atikah and Mohd Nurazzi, Norizan and A., Atiqah and Ansari, M.N.M. and Syafri, Edi and Asrof, Mochamad and Nasmi, Herlina Sari (2019) Effect Of Sugar Palm Nanofibrillated Cellulose Concentrations On Morphological, Mechanical And Physical Properties Of Biodegradable Films Based On Agro-Waste Sugar Palm (Arenga Pinnata (Wurmb.) Merr) Starch. Journal Of Materials Research And Technology, 8 (5). pp. 4819-4830. ISSN 2238-7854

Imam Fauzai, Elfi Rahayu and Ali Mokhtar, Mohd Najib and Che Jamil, Mohd Sabri and Samad, Zahurin (2019) Influence Of Non-Conventional Beam Profile On Edge Effects In Laser Forming Of AISI 304 Stainless Steel Plate. The International Journal Of Advanced Manufacturing Technology, 104 (1-4). pp. 1593-1601. ISSN 0268-3768

Imam Fauzi, Elfi Rahayu and Mohd Najib, Ali Mokhtar and Samad, Zahurin and Mohamad Nor, Norzalilah and Che Jamil, Mohd Sabri (2019) Thermo-mechanical modelling of laser welding process on aluminium alloy EN AW 6082-T6. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 60 (2). 296 - 309. ISSN 2289-7879

Indra, Win Adiyansyah and Azahar, Arman Hadi and Manap, Mustafa and Jamil Alsayaydeh, Jamil Abedalrahim and -, Irianto (2019) On-line microwave moisture technique performance of ferronickel. International Journal of Integrated Engineering, 11 (3). pp. 216-222. ISSN 2229-838X

Indra, Win Adiyansyah and Chan, Jien Yang (2019) Development Of Multi-Controlled Floor Vacuum Cleaner Using RF Energy Harvesting. ARPN Journal of Engineering and Applied Sciences, 14 (21). pp. 3738-3742. ISSN 1819-6608

Indra, Win Adiyansyah and Hamid, Mohd Saad and Mohd Yusof, Norfadzlia and Jayraman, Nishanthinidevi and Rusnandi, Herdy (2019) Frequency Reuse Optimization For OFDMA Network. Journal Of Engineering And Applied Sciences, 14 (4). pp. 1219-1225. ISSN 1816-949X

Indra, Win Adiyansyah and Sukumaran, Saravanan and Mohd Annuar, Khalil Azha and -, Irianto (2019) Analysis Of Handover Planning In Wideband Code Division Multiple Access (W–CDMA). Journal Of Engineering And Applied Sciences, 14 (3). pp. 823-830. ISSN 1816-949X

Indra, Win Adiyansyah and Wong, Adam Yoon Khang and Yap, Thai Yung and Jamil Alsayaydeh, Jamil Abedalrahim (2019) Radio-Frequency Identification (RFID) Item Finder Using Radio Frequency Energy Harvesting. ARPN Journal of Engineering and Applied Sciences, 14 (20). pp. 3554-3560. ISSN 1819-6608

Ishak, Anuar and Waini, Iskandar and Pop, Ioan Mihai (2019) On The Stability Of The Flow And Heat Transfer Over A Moving Thin Needle With Prescribed Surface Heat Flux. Chinese Journal of Physics, 60. pp. 651-658. ISSN 0577-9073

Ismail, Edhuan and Fauzi, Fatin Bazilah and Mohd Yasin, Mohd Fairus and Mohd Abid, Mohd Asyadi 'Azam and Mohamed, Mohd Ambri and Yaacob, Iskandar Idris and Md Din, Muhamad Faiz and Ani, Mohd Hanafi (2019) Kinetic studies of few-layer graphene grown by flame deposition from the perspective of gas composition and temperature. RSC Advances, 9. pp. 21000-21008. ISSN 2046-2069

Ismail, Fazilah and Ahmad, Sabrina and Hashim, Ummi Rabaah (2019) An Exploration To Determine Essential Requirements For Smart Home Application. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 1760-1764. ISSN 2278-3075

Ismail, Najiahtul Syafiqah and Yusof, Robiah and Saad, Halizah and Abdollah, Mohd Faizal and Yusof, Robiah (2019) Intersection Features For Android Botnet Classification. International Journal Of Recent Technology And Engineering (IJRTE), 8 (4). pp. 4422-4427. ISSN 2277-3878

Jaafar, Hazriq Izzuan and Mohamed, Zaharuddin and Shamsudin, Mohamad Amir and Mohd Subha, Nurul Adilla and Ramli, Liyana and Abdullahi, Muhammad Auwalu (2019) Model Reference Command Shaping For Vibration Control Of Multimode Flexible Systems With Application To A Double-Pendulum Overhead Crane. Mechanical Systems And Signal Processing, 115. pp. 677-695. ISSN 0888-3270

Jali, Mohd Hafiz and Harun, Sulaiman Wadi and Mohd Yusof, Haziezol Helmi and Md Johari, Md Ashadi and Abdul Rahim, Hazli Rafis and Rahman, B. M.Azizur and Yasin, Mohamad (2019) Formaldehyde Sensing Using ZnO Nanorods Coated Glass Integrated With Microfiber. Optics and Laser Technology, 120. pp. 1-9. ISSN 0030-3992

Jamil Alsayaydeh, Jamil Abedalrahim and Indra, Win Adiyansyah and Wong, Adam Yoon Khang and P. Jkatisan, Dhanigaletchmi and Shkarupylo, Vadym (2019) Development Of Vehicle Ignition Using Fingerprint. ARPN Journal Of Engineering And Applied Sciences, 14 (23). pp. 4045-4053. ISSN 1819-6608

Jamil Alsayaydeh, Jamil Abedalrahim and Khang, Adam Wong Yoon and Idrus, Sevia Mahdaliza and Zulkifli, Nadiatulhuda and Elshaikh, Mohamed Elobaid (2019) Efficient P2P data dissemination in integrated optical and wireless networks with Taguchi method. Telkomnika (Telecommunication Computing Electronics and Control), 17 (4). pp. 1642-1647. ISSN 1693-6930

Jamil Alsayaydeh, Jamil Abedalrahim and Khang, Adam Wong Yoon and Indra, Win Adiyansyah and Jayasundar, Jayananthinii and Shkarupylo, Vadym (2019) Development Of Smart Dustbin By Using Apps. ARPN Journal of Engineering and Applied Sciences, 14 (21). pp. 3703-3711. ISSN 1819-6608

Jamil Alsayaydeh, Jamil Abedalrahim and Syed Salim, Syed Najib and Wong, Adam Yoon Khang and Indra, Win Adiyansyah and Mohamed, Njikam and Pellipus, Christina and Shkarupylo, Vadym (2019) Homes Appliances Control Using Bluetooth. ARPN Journal of Engineering and Applied Sciences, 14 (19). pp. 3344-3357. ISSN 1819-6608

Jamli, Mohamad Ridzuan and Che Zainal Abidin, Nik Mohd Farid (2019) The Sustainability Of Neural Network Applications Within Finite Element Analysis In Sheet Metal Forming: A Review. Measurement: Journal of the International Measurement Confederation, 138. pp. 446-460. ISSN 0263-2241

Jano, Zanariah and Omar, Norliza and Nazir, Faridah (2019) Algorithm As A Problem Solving Technique For Teaching And Learning Of The Malay Language. Journal of Social Sciences And Humanities, 16 (7). pp. 1-12. ISSN 1823-884X

Jingsi, Wang and Liew, Pay Jun and Jiaqi, Zhu (2019) Material removal in ultrasonic abrasive polishing of additive manufactured components. Applied Sciences, 9 (24). pp. 1-13. ISSN 2076-3417

Johari, Siti Halma and Zahari, Madiha and Ab Wahab, Norfariza and Abd. Mutalib, Nurliyana and Ahmad, Suziana and Abdul Hadi, Dayanasari and Hashim, Norlezah and Mazlan, Mazwin (2019) Development Of A Power Generator System Using Thermal Waste From A Car. The International Journal of Integrated Engineering, 11 (4). pp. 260-267. ISSN 2229-838X

Jopri, Mohd Hatta and Manap, Mustafa and Yusoff, Mohd Rahimi and Azahar, Arman Hadi and Abdullah, Abdul Rahim and Karim R., Karim R. (2019) A Verification Of Periodogram Technique For Harmonic Source Diagnostic Analytic By Using Logistic Regression. Telkomnika (Telecommunication Computing Electronics and Control), 17 (1). pp. 497-507. ISSN 1693-6930

Jumaidin, Ridhwan and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahi, Mohammad Khalid and Yaakob, Mohd Yuhazri and Maidin, Nurul Ain and Osman, Mohd Hairizal and Sutan Saidi, Zulhelmi Asyul and Ahmad Ilyas, Rushdan (2019) Characteristics Of Cogon Grass Fibre Reinforced Thermoplastic Cassava Starch Biocomposite: Water Absorption And Physical Properties. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (1). pp. 43-52. ISSN 2289-7879

Jumaidin, Ridhwan and Abdullah, Muhammad Ilman Hakimi Chua and Jopri, Iffa Marina and Hussin, Mohamed Saiful Firdaus and Hasan, Rafidah and Saleman, Abdul Rafeq and Idral, Febrian and Aziz, Alia Ruzana (2019) Effect Of Cooling Medium And Tempering On Microstructures And Hardness Of SK3 High Carbon Steel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (2). pp. 199-209. ISSN 2289-7879

Jumaidin, Ridhwan and Adam, Nur Wardah and Azlan, Umar Al-Amani and Hussin, Mohamed Saiful Firdaus and Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Yob, Mohd Shukri and Ahmad Ilyas, Rushdan (2019) Water Transport And Physical Properties Of Sugarcane Bagasse Fibre Reinforced Thermoplastic Potato Starch Biocomposite. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (2). pp. 273-281. ISSN 2289-7879

Kaharudin, Khairil Ezwan and Salehuddin, Fauziyah and Roslan, Ameer Farhan and Mohammed Napiah, Zul Atfyi Fauzan and Mohd Zain, Anis Suhaila (2019) Design Consideration And Impact Of Gate Length Variation On Junctionless Strained Double Gate MOSFET. International Journal of Recent Technology and Engineering, 8 (2S6). pp. 783-791. ISSN 2277-3878

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati and Hairi, Mohd Hendra and Khamis, Alias and Husain, Abdul Rashid (2019) Linearization - Advantages And Shortcomings Toward Control System Design. International Journal of Electrical Engineering and Applied Sciences, 2 (2). pp. 17-21. ISSN 2600-9633

Kamarudin, Muhammad Nizam and Md. Rozali, Sahazati and Sutikno, Tole and Husain, Abdul Rashid (2019) New Robust Bounded Control For Uncertain Nonlinear System Using Mixed Backstepping And Lyapunov Redesign. International Journal Of Electrical And Computer Engineering (IJECE), 9 (2). pp. 1090-1099. ISSN 2088-8708

Kamis, Zalina and Ab Ghani, Mohd Ruddin and Kamarudin, Muhammad Nizam and Mohd Shah, Hairol Nizam and Jano, Zanariah (2019) A Review On SVC Control For Power System Stability With And Without Auxiliary Controller. Bulletin Of Electrical Engineering And Informatics, 8 (3). pp. 761-768. ISSN 2302-9285

Karis, Mohd Safirin and Hasim, Norhaslinda and Zainal Abidin, Amar Faiz and Sulaiman, Siti Fatimah (2019) Stopwatch Verification Platform The Development Of An Automated Device For Stopwatch Calibration. International Journal of Recent Technology and Engineering, 8 (3). pp. 4171-4176. ISSN 2277-3878

Karyono, Giat and Ahmad, Asmala and Asmai, Siti Azirah (2019) Privacy, Ethics, And Security On Social Media: An Islamic Overview. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.5). pp. 288-293. ISSN 2278-3091

Kasim, Mohd Shahir and Abdul Aziz, Mohd Sanusi and Mohd Shahrim, Mohammad Shah All-Hafiz and Wong, Pui Kei and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdul Ghani, Jaharah and Haron, Che Hassan and Saedon, Juri (2019) Chip Morphology In Ball Nose End Milling Process Of Nickel Based Alloy Material Under MQL Condition. The International Journal of Advanced Manufacturing Technology, 102 (9-12). pp. 1-7. ISSN 0268-3768

Kasim, Mohd Shahir and Harun, Nurul Hatiqah and Mohd Shahim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah (2019) Multi-response optimization of process parameter in fused deposition modelling by response surface methodology. International Journal Of Recent Technology And Engineering (IJRTE), 8 (3). pp. 327-338. ISSN 2277-3878

Kasim, Mohd Shahir and Mohd Nasir, Faarih Farhan and A Ghani, Jaharah and Raja Abdullah, Raja Izamshah and Mohd Shahrim, Mohammad Shah All Hafiz and Wong, Pui Kei and Yusof, Ahmad Anas and Mohamad, W Noor Fatihah (2019) Analysis On Effect Of Ball Bladder Size During Water Hammer In Domestic Water System. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 61 (1). pp. 33-43. ISSN 2289-7879

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Ghani Abdul, Jaharah and Che Haron, Che Hassan and Raja Abdullah, Raja Izamshah and Sundi @ Suandi, Syahrul Azwan and Mohamed, Saiful Bahri and Othman, Intan Sharhida (2019) Investigation Of Surface Topology In Ball Nose End Milling Process Of Inconel 718. Wear, 426-42. pp. 1318-1326. ISSN 0043-1648

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and Raja Abdullah, Raja Izamshah and W. Mohamad, W Noor Fatihah and Abdullah, Abu and Jaafar, Mohd Fairuz (2019) An Assessment For A New Approach To Pulsating Lubrication Strategy (PLS) In End Milling. The International Journal of Advanced Manufacturing Technology, 105. pp. 3157-3163. ISSN 0268-3768

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Mohd Zainurin, Nurul Shafiqah and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah and Mat Harttar, Maziati Akmal and Mohamed, S.B. and Nawi, M.A.M. (2019) The Effects Of Dry And Chilled Air On Tool Wear Behavior During Face Milling Of Inconel 718. Jurnal Tribologi, 21. pp. 47-62. ISSN 2289-7232

Kasmuri, Emaliana and Basiron, Halizah (2019) Building a malay-english code-switching subjectivity corpus for sentiment analysis. International Journal of Advances in Soft Computing and its Applications, 11 (1). pp. 112-130. ISSN 2074-8523

Katijan, Adnan and Abdul Latif, Mohd Faruq and Zahmani, Qamar Fairuz and Zaman, Shahid and Abdul Kadir, Khairuldean and Veza, Ibham (2019) An Experimental Study For Emission Of Four Stroke Carbureted And Fuel Injection Motorcycle Engine. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 62 (2). pp. 256-264. ISSN 2289-7879

Katijan, Adnan and Kamardin, Azizul Hakim (2019) The Effect Of Compression Ratio By Different Piston Head Shape On The Performance Of Motorcycle Engine. International Journal of Automotive and Mechanical Engineering, 16 (3). pp. 6906-6917. ISSN 2180-1606

Khadom Mohsen, Mowafak and Awang Md Isa, Azmi and Lafta Attiah, Mothana and Mohamad Isa, Mohd Sa'ari and Kaml Abdulhammed, Muhannad and Zakaria, Zahriladha and M. Dinar, Ahmed (2019) Electronically Controlled Radiation Pattern Leaky Wave Antenna Array For (C Band) Application. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (2). pp. 573-579. ISSN 1693-6930

Khallawi, Alaa Razzaq and Tan, Ying Yi and Hanaffi, Farhan and Abdul Razak, Hanim and Zainuddin, Hidayat and Chyad, Radhi Muhssin (2019) Transformer oil ageing detection using Mach-Zender interferometry configuration as a sensor. International Journal Of Recent Technology And Engineering (IJRTE), 8 (2S6). pp. 826-831. ISSN 2277-3878

Khallawi, Alaa Razzaq and Zainuddin, Hidayat and Hanaffi, Farhan and Abdul Latiff, Anas and Abdul Razak, Hanim and Chyad, Radhi Muhssin (2019) Measurement of ester-based transformer oil aging using tapered single mode-multimode-single mode fiber structure. Microwave And Optical Technology Letters, 62 (2). pp. 559-564. ISSN 0895-2477

Khallawi, Alaa Razzaq and Zainuddin, Hidayat and Hanaffi, Farhan and Chyad, Radhi Muhssin (2019) Transformer oil diagnostic by using an optical fibre system: a review. IET Science, Measurement & Technology, 13 (5). pp. 615-621. ISSN 1751-8822

Khamis, Noorli and Abdullah, Imran-Ho (2019) Extracting Significant Words In Engineering Texts For Specialised Language Descriptions. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 5862-5868. ISSN 2278-3075

Khang, Adam Wong Yoon and Elias, Shamsul Jamel and Pusppanathan, Jaysuman and Zulkifli, Nadiatulhuda and Nasrul Helmei, Halim and Abdullah, Shapina (2019) Last mile mobile hybrid optical wireless access network routing enhancement. Bulletin Of Electrical Engineering And Informatics, 8 (1). pp. 188-195. ISSN 2089-3191

Khang, Adam Wong Yoon and Jamil Alsayaydeh, Jamil Abedalrahim and Indra, Win Adiyansyah and Pusppanathan, Jaysuman and Elias, Shamsul Jamel (2019) Taguchi based self-configure data rate optimization AODVUU routing parameters in MANET over optical network performances. International Journal Of Engineering And Advanced Technology (IJEAT), 8 (5). pp. 316-322. ISSN 2249-8958

Khashi'ie, Najiyah Safwa and Md Arifin, Norihan and Wahi, Nadihah and Nazar Mohd, Roslinda and Hafidzuddin, Ezad Hafidz and Pop, Ioan Mihai (2019) A Stability Analysis For Magnetohydrodynamics Stagnation Point Flow With Zero Nanoparticles Flux Condition And Anisotropic Slip. Energies, 12 (7). 01-19. ISSN 1996-1073

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2019) MHD Mixed Convective Stagnation Point Flow With Heat Generation Past A Shrinking Sheet. ASM Science Journal, 12 (SI1). pp. 71-81. ISSN 1823-6782

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2019) Thermally Stratified Flow Of Cu-Al2O3/Water Hybrid Nanofluid Past A Permeable Stretching/Shrinking Circular Cylinder. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 63 (1). pp. 154-163. ISSN 2289-7879

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah and Ilias, Mohd Rijal (2019) Magnetohydrodynamics (MHD) Flow And Heat Transfer Of A Doubly Stratified Nanofluid Using Cattaneo-Christov Model. Universal Journal of Mechanical Engineering, 7 (4). pp. 206-214. ISSN 2332-3361

Khashi’ie, Najiyah Safwa and Md Arifin, Norihan and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah and Pop, Ioan Mihai (2019) Mixed Convective Stagnation Point Flow Of A Thermally Stratified Hybrid CU-AL2O3/Water Nanofluid Over A Permeable Stretching/Shrinking Sheet. ASM Science Journal, 12 (SI5). pp. 17-25. ISSN 1823-6782

Khavanin, Ali and Taban, Ebrahim and Soleimanian, Ardalan and Ohadi, Abdolreza R. and Putra, Azma and Jafari, Ahmad Jonidi and Faridan, Mohammad (2019) Study On The Acoustic Characteristics Of Natural Date Palm Fibres: Experimental And Theoretical Approaches. Building and Environment, 161. pp. 1-11. ISSN 0360-1323

Lago, Herwansyah and Zakaria, Zahriladha and Jamlos, Mohd Faizal and Soh, Ping Jack (2019) A Wideband Reconfigurable Folded Planar Dipole Using MEMS And Hybrid Polymeric Substrates. AEU - International Journal Of Electronics And Communications, 99. pp. 347-353. ISSN 1434-8411

Laily, Suraya and Hussein, Nur Izan Syahriah and Salleh, Mohd Shukor and Mohamad Nizam, Ayof (2019) Statistical analysis of second repair welding on dissimilar material using Taguchi method. Journal of Mechanical Engineering and Sciences, 13 (2). pp. 5021-5030. ISSN 2289-4659

Lau, Kok Tee and Kok, Hoi Ern and Ab Maulod, Hairul Effendy and Abdul Latiff, Nurizzatul Zahirah and Abdul Aziz, Aida Nazifa and Rosli, Nur Hazirah (2019) Effect Of Laminating Press’s Opening-Stacking Position On Adhesive Thickness In Coverlay/Adhesive/Flexible-Printed-Circuit Sheet. Journal Of Engineering Technology And Applied Physics, 1 (1). pp. 1-3. ISSN 2682-8383

Loh, Ser Lee and Keek, Joe Siang and Chong, Shin Horng (2019) Comprehensive Development And Control Of A Path-Trackable Mecanum-Wheeled Robot. IEEE Access, 7. pp. 18368-18381. ISSN 2169-3536

Luo, Murong and Al-Shami, Samer Ali Hussein and Mansor, Nusaibah (2019) Innovation: The Key Factor Of Competitiveness For Chinese SMES. Opcion, 35 (20). pp. 2899-2921. ISSN 1012-1587

M, Sushmitha and Narayanamurthy, Vigneswaran and James. A, Jasper and Samsuri, Fahmi and N, Padmasini. (2019) Microfluidic Microchannel (Size And Shape) for Single Cell Analysis by Numerical Optimization: Lateral Trapping Method. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1S4). pp. 747-752. ISSN 2249–8958

Mabrok, Mussa and Zakaria, Zahriladha and Masrukin, Yully Erwanti and Othman, Abdul Rani and Edward, Nurhasniza and Sutikno, Tole (2019) Switchable Dual-Band Bandpass Filter Based On Stepped Impedance Resonator With U-Shaped Defected Microstrip Structure For Wireless Applications. Telkomnika (Telecommunication Computing Electronics and Control), 17 (2). pp. 1032-1039. ISSN 1693-6930

Mahdin, Hairulnizam and Azmi, Mohd Sanusi and Kasim, Shahreen and Ridzuan, Farah Ruzanna (2019) An Image-Based Captcha System Using Click. Acta Electronica Malaysia (AEM), 3 (1). pp. 23-25. ISSN 2590-4043

Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Mazlan, Siti Nur Humaira and Abdul Latiff, Muhammad (2019) Airco Wind Turbine Prototype Design And Development. International Journal of Recent Technology and Engineering, 8 (1S5). pp. 79-85. ISSN 2277-3878

Maidin, Shajahan and John Wong, Huang Ung and Akmal, Suriati and Romlee, Wan Fatin Athirah and Mohamed, Ahmad Syafiq (2019) Vacuum System Assisted Fdm – Characteristic Of Heat Transfer Using Finite Element Analysis. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 1-6. ISSN 2277-3878

Marisa, Fitri and Syed Ahmad, Sharifah Sakinah and Mohd Yusoh, Zeratul Izzah and Akhriza, Tubagus Mohammad and Purnomowati, Wiwin and Pandey, Rakesh Kumar (2019) Performance Comparison Of Collaborative-Filtering Approach With Implicit And Explicit Data. International Journal of Advanced Computer Science and Applications, 10 (10). pp. 110-116. ISSN 2158-107X

Marjumin, N.H. and Sidek, Safiah and Abu Hassan, Mahadi and Kudus, Norliah and Mohamed, Shahrulanuar and Rajikon, Muhd Akmal Noor and Kamalrudin, Massila (2019) The Challenges And Contribution Of Internet Of Things (IoT) For Smart Living. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 162-166. ISSN 2277-3878

Maslan, Mohd Nazmin and Sato, Kaiji and Shinshi, Tadahiko (2019) Position Measurement And Control Of A Thin And Compact Linear Switched Reluctance Motor With A Disposable-Film Mover. SENSORS AND ACTUATORS A: PHYSICAL, 285. pp. 80-88. ISSN 0924-4247

Masripan, Nor Azmmi and Omar, Ghazali and Salim, Mohd Azli and Mansor, Muhd Ridzuan and Md. Saad, Adzni and Abdul Hamid, Nurfaizey and Mohamad, Imran Syakir and Abdul Rashid, Zulhilmi and Al-Nasrawi, Hayder Saad Oleiwi (2019) Effect Of Load And Temperature On Friction Using Banana Peel Blended With Paraffin Oil Under High Loading Capacity. Journal of Mechanical Engineering and Technology, 11 (2). pp. 24-35. ISSN 2180-1053

Mat Dan, Reduan and Putra, Azma and Sudin, Mohd Nizam and Abdul Hamid, Abdul Hakim and Mazlan, Rozdman Khaidir (2019) Wear Behaviour Of A-C: H Helical Gear Through Particle Generation. Defence S and T Technical Bulletin, 12 (1). 161 - 175. ISSN 1985-6571

Mat Lazi, Jurifa and Talib, Md Hairul Nizam and Azri, Maaspaliza and Ibrahim, Zulkifilie and Alias, Azrita and Hanafi, Ainain Nur (2019) Speed and position estimator of for sensorless PMSM drives using adaptive controller. International Journal of Power Electronics and Drive Systems (IJPEDS), 10 (1). pp. 128-136. ISSN 2088-8694

Mat Rashid, Rasyimawati and Radin Umar, Radin Zaid and Ahmad, Nadiah (2019) Research Trends On Control Of Industrial Major Accident Hazard Occurrence In Malaysia: A Thematic Review. Journal of Legal, Ethical and Regulatory Issues, 22 (1). pp. 1-10. ISSN 1544-0036

Mat Rawi, Nor Afifah and Muslim, Zulkiflee and Ayop, Zakiah and Nahar, Haniza and Mohd Abid, Mohd Asyadi 'Azam (2019) Effect Of Video Encoding Scheme Of Battery Consumption Of Mobile Device. Journal Of Advanced Computing Technology And Application (JACTA), 1 (1). pp. 15-23. ISSN 2672-7188

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody and Tokoroyama, Takayuki and Umehara, Noritsugu (2019) The Tribological Potential Of Graphene Growth From Solid Waste. Progress in Industrial Ecology, 13 (4). pp. 401-413. ISSN 1476-8917

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Tamaldin, Noreffendy and Amiruddin, Hilmi and Mohamad Zin, Mohd Rody (2019) Graphene Coatings Technology On Tribology Perspective. International Journal of Recent Technology and Engineering (IJRTE), 8 (1S5). pp. 33-37. ISSN 2277-3878

Md Alias, Muhammad Aizat and Abdollah, Mohd Fadzli bin and Amiruddin, Hilmi (2019) Lubricant And Tribological Properties Of Zinc Compound In Palm Oil. Industrial Lubrication and Tribology, 71 (10). pp. 1177-1185. ISSN 0036-8792

Md Arifin, Norihan and Khashi'Ie, Najiyah Safwa and Wahi, Nadihah and Mohd Nazar, Roslinda and Hafidzuddin, Ezad Hafidz and Pop, Ioan Mihai (2019) Mixed Convective Flow And Heat Transfer Of A Dual Stratified Micropolar Fluid Induced By A Permeable Stretching/Shrinking Sheet. Entropy, 21 (12). 01-16. ISSN 1099-4300

Md Arifin, Norihan and Khashi'ie, Najiyah Safwa and Hafidzuddin, Ezad Hafidz and Wahi, Nadihah (2019) Dual Stratified Nanofluid Flow Past A Permeable Shrinking/Stretching Sheet Using A Non-Fourier Energy Model. Applied Sciences, 9 (10). 01-21. ISSN 2076-3417

Md Basar, Mohd Farriz and Mohd Rais, Nurul Ashikin and Ibrahim, Khairul Anwar and Mohd Hassan, Fatin Syakira and Sopian, Kamaruzzaman (2019) Economic Analysis On Design Of A Simple Hydraulic Reaction Type Turbine For Low-Head Low-Flow Pico Hydro. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (2). pp. 3976-3980. ISSN 2278-3075

Md Ghazaly, Mariam and Mohamad Yuden, Mohamad Adzeem and Che Amran, Aliza (2019) Motion And Grasping Control Method Of 2-Dof Robotic Finger. International Journal of Mechanical and Mechatronics Engineering, 19 (5). pp. 50-55. ISSN 2227-2771

Md Ghazaly, Mariam and Nadzmy, Fawwaz (2019) Modeling and simulation of a tubular linear switched reluctance actuator. International Journal Of Engineering And Advanced Technology (IJEAT), 8 (12S2). pp. 489-494. ISSN 2249-8958

Md Jani, Noraniza and Zakaria, Mohd Hafiz and Maksom, Zulisman and M. Haniff, Md. Shariff (2019) Setting Strategies In Social Networking Sites: Community-Based Indicators For Small And Medium Industries In Malaysia. Journal Of Advanced Computing Technology And Application (JACTA), 1 (1). pp. 1-7. ISSN 2682-8820

Md Johari, Md Ashadi and Jali, Mohd Hafiz and Abdul Khudus, Muhammad Imran Mustafa and Al Noman, Abdullah and Wadi Harun, Sulaiman (2019) Whispering gallery modes on optical micro-bottle resonator for humidity sensor application. Optik, 185. pp. 558-565. ISSN 0030-4026

Md Rozali, Sahazati and Mohd Nor, Rozilawati and Che Amran, Aliza and Mohamad Saleh, Saleha (2019) Design Of Mini Generator Based On The Principle Of Water Flow Pressure By Using Vortex Turbine. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12). pp. 5875-5878. ISSN 2278-3075

Md Rozali, Sahazati and Mohd Nor, Rozilawati and Kamarudin, Muhammad Nizam and Mohd Aras, Mohd Shahrieel (2019) Development Of Mini Wind Turbine Generator. International Journal Of Innovative Technology And Exploring Engineering (IJITEE), 8 (12S2). pp. 459-464. ISSN 2278-3075

Md Sani, Zamani and Abd Ghani, Hadhrami and Besar, Rosli and Azizan, Azizul (2019) Road markers classification using binary scanning and slope contours. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 17 (4). pp. 2048-2057. ISSN 1693-6930

Md Yasid, Nurul Farahwahida and Ab Ghani, Sharin and Zainuddin, Hidayat and Yousof, Mohd Fairouz Mohd and Abd Rahman, R. (2019) The Effect Of Short Circuit Fault On One Winding To Other Windings In FRA. International Journal of Power Electronics and Drive Systems (IJPEDS, 10 (2). pp. 585-593. ISSN 2088-8694

Md. Rozali, Sahazati and Mohd Nor, Rozilawati and Abdul Rahim, Muhammad Atikkullah and Kamarudin, Muhammad Nizam and Hairi, Mohd Hendra (2019) Development Of Mini Generator Based On Wind Turbine Principle. International Journal of Electrical Engineering and Applied Sciences (IJEEAS), 2 (2). pp. 45-48. ISSN 2600-7495

Meor Said, Maizatul Alice and Misran, Mohamad Harris and Mohd Noor, Faza Syahirah and Husain, Mohd Nor and Zakaria, Zahriladha (2019) 2.45 GHz Rectenna With High Gain For RF Energy Harvesting. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 384-391. ISSN 1693-6930

Mirin, Siti Nur Suhaila and Mohammad Mohsin, Taufiq Mafalen and Mohd Annuar, Khalil Azha (2019) Flexible Parallel Bar For Physiotherapy Purposes. International Journal Of Human And Technology Interaction (IJHaTI), 3 (1). pp. 55-64. ISSN 2590-3551

Mizobuchi, Akira and Abdul Aziz, Mohd Sanusi and Kasim, Mohd Shahir and Mohamad, Effendi and Salleh, Mohd Rizal and Raja Abdullah, Raja Izamshah and Ishida, Tohru (2019) Helical Micro-Hole Drilling Of Chemically Strengthened Glass Using Capsule-Shaped Electroplated Diamond Tool. Journal of Advanced Manufacturing Technology, 13 (2). pp. 69-81. ISSN 1985-3157

Mohamad, Effendi and A Rahman, Muhamad Arfauz and Salleh, Mohd Rizal and Ibrahim, Mohd Amran and Sulaiman, Mohd Amri (2019) Generation Of A Decision Support System To Enhance The Efficiency Of Lean Manufacturing. Industrial Engineering & Management Systems, 18 (2). pp. 173-181. ISSN 1598-7248

Mohamad, Effendi and Jiga, Elnie Carina and Rahmat, Rashitah and Azlan, Alya and Abd Rahman, Mohd Soufhwee and Adi, Saptari (2019) Online Booking Systems For Managing Queues At The Road Transport Department. Journal of Industrial Engineering, Scientific Journal on Research and Application of Industrial System, 4 (1). pp. 21-32. ISSN 2503-3670

Mohamad, Effendi and Rahmat, Rashitah and Mohamad, Nor Akramin and Jaafar, Roshidah and Yuniawan, Dani and Ito, Teruaki (2019) Improving Electronic Document Control Approval Process Through E-Certification. Journal of Advanced Manufacturing Technology (JAMT), 13 (1). pp. 33-44. ISSN 1985-3157

Mohamad, Effendi and Salleh, Mohd Rizal and A Rahman, Muhamad Arfauz and Sulaiman, Mohd Amri and Ishak, Anuar and Teruaki, Ito (2019) Cleaner Production Value Stream Mapping At A Chromium Plating Plant: A Case Study. International Journal Of Agile Systems And Management (IJASM), 12 (3). pp. 245-260. ISSN 1741-9174

Mohamad, Noraiham and Karim, Khairu Ilwani and Abd Razak, Jeefferie and Mohd Abid, Mohd Asyadi Azam and Ab Maulod, Hairul Effendy and Mazlan, Mazliah and Mahamood, Mazlin Aida (2019) Optimization of physical and mechanical properties of glycerol - modified natural rubber/starch - filled carbon black composites using two level factorial design. Journal of Mechanical Engineering and Sciences (JMES), 13 (2). pp. 4989-5005. ISSN 2289-4659

Mohamad, Siti Nurul Mahfuzah and Mohd Salleh, Mohd Azran and Abdul Hamid, Mohd Hakim and Khoo, Linda Mei Sui and Che Ku Mohd, Che Ku Nuraini (2019) Adaptive Learning Strategies With Gamification To Enhance Learning Engagement. Indian Journal of Science and Technology, 12 (31). 01-08. ISSN 0974-5645

Mohamad Basir, Muhammad Sufyan Safwan and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah (2019) A Comparative Study On Spectrogram And S-Transform For Batteries Parameters Estimation. Jurnal Teknologi, 81 (2). pp. 113-122. ISSN 0127-9696

Mohamad Ismail, M. R. and Lam, Chee Kiang and Sundaraj, Kenneth and Fazalul Rahiman, Mohd Hafiz (2019) Hand Motion Pattern Recognition Analysis Of Forearm Muscle Using MMG Signals. Bulletin Of Electrical Engineering And Informatics, 8 (2). 533 - 540. ISSN 2302-9285

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan (2019) Identification Of Weak Buses In Electrical Power System Based On Modal Analysis And Load Power Margin. ARPN Journal Of Engineering And Applied Sciences, 14 (7). pp. 1377-1384. ISSN 1819-6608

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan (2019) Voltage Instability Analysis Based On Modal Analysis Technique And Artificial Neural Network. Indonesian Journal Of Electrical Engineering And Computer Science, 13 (3). pp. 1274-1279. ISSN 2502-4752

Mohamad Sabri, Muhammad Haziq and Ahmad, Mohd Riduan and Periannan, Dinesh and Seah, Boon York and Yusop, Norbayah and Mohd Esa, Mona Riza and Mohammad, Sulaiman Ali and Abdul-Malek, Zulkurnain and Lu, Gaopeng and Zhang, Hongbo and Cooray, Vernon and Al-Kahtani, Ammar Ahmed and Ab Kadir, Mohamad Zainal Abidin and Mohd Hatta, Norhasliza and Abdullah, Noradlina and Yahaya, Mohd Pauzi (2019) Environmental analysis of quasi-static electric field changes of tropical lightning flashes. EKOLOJI, 28 (107). pp. 373-378. ISSN 1300-1361

Mohamad Sapiee, Mohd Razali and Abdul Wahit, Mohamad Aizat and Marhaban, Mohammad Hamiruce and Ishak, Asnor Juraiza and Mohd Annuar, Khalil Azha and Miskon, Muhammad Fahmi (2019) Simulation Of Control For Reduced DOF Lower Limb Exoskeleton Robot Using CAD Design. International Journal of Recent Technology and Engineering, 8 (1S5). 99 - 103. ISSN 22773878

Mohamad Sapiee, Mohd Razali and Mohd Annuar, Khalil Azha and Miskon, Muhammad Fahmi and Abdul Wahit, Mohamad Aizat and Marhaban, Mohammad Hamiruce and Ishak, Asnor Juraiza (2019) Simulation Of Control For Reduced Dof Lower Limb Exoskeleton Robot Using Cad Design. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 99-103. ISSN 2277-3878

Mohamad Yatim, Norazlina and Norazman, Farhaneem and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Norhidayah (2019) Characterization Of phosphoric acid biochar derived from rubber wood sawdust for enhancement Of urea fertilizer impregnation. ARPN Journal Of Engineering And Applied Sciences, 14 (12). pp. 2185-2192. ISSN 1819-6608

Mohamad Yatim, Norazlina and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Noraiham and Yusof, Faridah (2019) Urea functionalized multiwalled carbon nanotubes as efficient nitrogen delivery system for rice. Advances In Natural Sciences: Nanoscience And Nanotechnology, 10 (1). pp. 1-11. ISSN 2043-6262

Mohamad Zawawi, Nur Amalina and Hisham, Syariffanor and Zakaria, Mohd Hafiz and Sainawan, S. S. (2019) An Evaluation Of Proposed Readability Formula In Malay Language. International Journal of Recent Technology and Engineering (IJRTE), 8 (1S5). pp. 138-143. ISSN 2277-3878

Mohamed, Shahrulanuar and Sidek, Safiah and Izharrudin, Siti Zakiah and Kudus, Norliah and Abu Hassan, Mahadi and Rajikon, Muhd Akmal Noor (2019) Social Media Usage And Its Impact On Work Productivity At A Malaysian University. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 167-172. ISSN 2277-3878

Mohamed, Zaharuddin and Jaafar, Hazriq Izzuan and Mohd Subha, Nurul Adilla and Husain, Abdul Rashid and Ismail, Fatimah Sham and Ramli, Liyana and Tokhi, Mohammad Osman and Shamsudin, Mohamad Amir (2019) Efficient Control Of A Nonlinear Double-Pendulum Overhead Crane With Sensorless Payload Motion Using An Improved PSO-Tuned PID Controller. Journal Of Vibration And Control, 25 (4). pp. 907-921. ISSN 1077-5463

Mohamed Abdulrahim, Abdulrazzak Ali and Emran, Nurul Akmar and Asmai, Siti Azirah and Ismail, Amelia Ritahani (2019) An assessment of open data sets completeness. International Journal Of Advanced Computer Science And Applications (IJASCA), 10 (6). pp. 557-562. ISSN 2158-107X

Mohamed Aminuddin, Mai Mariam and Mohamad Tarmizi, Noor Huda Hazirah (2019) Automatic Vibration Device For Stroke Patients. International Journal Of Recent Technology And Engineering (IJRTE), 8 (2). pp. 2329-2332. ISSN 2277-3878

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2019) Focus Loss While Driving Detection By Using Prior Stage ERP As Baseline. International Journal Of Human And Technology Interaction (IJHaTI), 3 (1). pp. 39-46. ISSN 2590-3551

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah and Brahin, Noor Mohd Ariff and Mustaffa, Izadora (2019) Event-related potential N100 Vs. N170 wave results comparison on driving alertness. Journal Of Engineering Science and Technology, 14 (3). pp. 1150-1160. ISSN 1823-4690

Mohamed Hatim, Shahirah and Elias, Shamsul Jamel and Darus, Mohamad Yusof and Abdullah, Shapina and Jasmis, Jamaluddin and Ahmad, R. Badlishah and Khang, Adam Wong Yoon (2019) Congestion control in vehicular adhoc network: A survey. Indonesian Journal of Electrical Engineering and Computer Science, 13 (3). pp. 1280-1285. ISSN 2502-4752

Mohamed Kassim, Anuar and Awangku Jaya, Awangku Khairul Ridzwan and Azahar, Arman Hadi and Jaafar, Hazriq Izzuan and Subramonian, Sivarao and Jafar, Fairul Azni and Mohd Aras, Mohd Shahrieel (2019) Performance Analysis Of Acceleration Sensor For Movement Detection In Vehicle Security System. International Journal of Advanced Computer Science and Applications, 10 (10). pp. 395-401. ISSN 2158-107X

Mohamed Sultan, Al Amin and Mativenga, Paul Tarisai (2019) Sustainable Location Identification Decision Protocol (SuLIDeP) For Determining The Location Of Recycling Centres In A Circular Economy. Journal Of Cleaner Production, 223. pp. 508-521. ISSN 0959-6526

Mohammad, Muhammad Azrain and Mansor, Muhd Ridzuan and Omar, Ghazali and Sheikh Md Fadzullah, Siti Hajar and Dhar Malingam, Sivakumar and Nordin, Mohd Nur Azmi and Esa, Siti Rahmah (2019) Effect of high thermal stress on the organic light emitting diodes (OLEDs) performances. Synthetic Metals, 247. pp. 191-201. ISSN 0379-6779

Mohammad Taha, Mastura and Mansor, Muhd Ridzuan and Mohd Farhan Han, Syaza Najwa (2019) Thermal And Melt Flow Behaviour Of Kenaf Fibre Reinforced Acrylonitrile Butadiene Styrene Composites For Fused Filament Fabrication. Defence S and T Technical Bulletin, 12 (2). pp. 238-246. ISSN 1985-6571

Mohammed, Ali Abdul-Jabbar and Mohd Aboobaider, Burhanuddin and Alkhazraji, Adel Abdul-Jabbar and Hassan, Ali Abdul Hussian and Basiron, Halizah (2019) A multi-layer sensing as a service model based on internet of things for smart-healthcare applications. International Journal of Recent Technology and Engineering, 7 (6). 1126 - 1133. ISSN 2277-3878

Mohammed, Norazlin and Idrus, Junaidah (2019) Study On Heart Rate Visualisation Using Combination Of Real Time Heart Rate Detection And Augmented Reality. Indian Journal of Public Health Research and Development, 10 (4). pp. 1236-1242. ISSN 0976-0245

Mohammed Ibrahim, Ayman and Shairi, Noor Azwan and Imran, Mohd Ibrahim (2019) Compact Mimo Slots Antenna Design With Different Bands And High Isolation For 5G Smartphone Applications. Baghdad Science Journal, 16 (4). pp. 1093-1102. ISSN 2078-8665

Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Sabirin, Ilham and Mohd Annuar, Khalil Azha and Ahmad Kamal, Muhammad Firdaus (2019) Evaluation Of Charging Profile And Thermal Behaviour Of Lead Acid Battery. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 56 (1). pp. 124-132. ISSN 2289-7879

Mohd Ab Halim, Mohd Firdaus and Mohd Nor, Abdul Muim and Badari, Ahmad Al-Baihaqi and Zainal Abidin, Amar Faiz and Kadiran, Kamaru Adzha and Adam, Asrul and Mohamad, Syahrul Hisham and Harun, Mohamad Haniff (2019) Resducational kit the development of an electronic quiz board that test engineering students knowledge on resistors concept in electrical circuit. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1). pp. 202-207. ISSN 2277-3878

Mohd Ab Halim, Mohd Firdaus and Yaakub, Muhamad Faizal and Harun, Mohamad Haniff and Md Basar, Mohd Farriz and Mohd Annuar, Khalil Azha and Omar, Mohd Nazri (2019) An Analysis Of Energy Saving Through Delamping Method. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1569-1575. ISSN 2088-8708

Mohd Abid, Mohd Asyadi 'Azam and Talib, Elyas and Raja Seman, Raja Noor Amalina (2019) Direct deposition of multi-walled carbon nanotubes onto stainless steel and YEF foils using a simple electrophoretic deposition for electrochemical capacitor electrode. Materials Research Express, 6 (1). pp. 1-9. ISSN 2053-1591

Mohd Abid, Mohd Asyadi Azam and Abdul Manaf, Nor Syafira and Ahsan, Qumrul and Yahya, Muhd Zu Azhan (2019) Lithium-Ion Supercapacitor Using Vertically-Aligned Carbon Nanotubes From Direct Growth Technique, And Its Electrochemical Characteristics. Portugaliae Electrochimica Acta, 37 (3). 167 - 178. ISSN 0872-1904

Mohd Amin, Ahmad Nawawi and Kamat, Seri Rahayu and Kamalrudin, Massila and Wan Mahmood, Wan Hasrulnizzam (2019) Continuous Improvement Through Lean Using VSM For Application In Machining Based Product Company. International Journal Of Recent Technology And Engineering (IJRTE), 8 (2S11). pp. 778-784. ISSN 2277-3878

Mohd Annuar, Khalil Azha and Maharam, Muhammad Faiq and Ab Hadi, Nik Azran and Harun, Mohamad Haniff and Mohd Ab Halim, Mohd Firdaus (2019) Development Of Wireless And Intelligent Home Automation System. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 32-38. ISSN 1693-6930

Mohd Annuar, Khalil Azha and Md. Rozali, Sahazati and Mohamad Sapiee, Mohd Razali and Mohd Nor, Rozilawati and Nor Shah, Mohd Badril and Azali, M. S.M. (2019) Squirrel Cage Induction Motor Scalar Control Constant V/F Analysis. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 417-424. ISSN 1693-6930

Mohd Aras, Mohd Shahrieel and Aripin, Muhamad Khairi and Bahar, Mohd Bazli and Tan, Wei Chiang and Ooh, Man Chun and Ho, Gui Yan and Lim, Zhi Han (2019) Model-Based Design (MBD) for autonomous underwater vehicle. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 743-746. ISSN 2278-3075

Mohd Aras, Mohd Shahrieel and Chaing, Tan Pheng and Aripin, Muhamad Khairi and Mohd Zambri, Mohd Khairi and Khamis, Alias and Bahar, Mohd Bazli and Ab Rashid, Mohd Zamzuri (2019) Monitored and controlled underwater scissor arm manipulator using pixy camera. Indian Journal of Geo-Marine Sciences, 48 (7). pp. 1120-1131. ISSN 0379-5136

Mohd Aras, Mohd Shahrieel and Khor, Li Zhe and Aripin, Muhamad Khairi and Tan, Pheng Chaing and Mohd Shah, Hairol Nizam and Khamis, Alias and Nordin, Nurdiana and Ab Rashid, Mohd Zamzuri (2019) Design Analysis And Modelling Of Autonomous Underwater Vehicle (AUV) Using CAD. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 1081-1090. ISSN 0379-5136

Mohd Basri, Mohd Ariffanan and Noordin, Aminurrashid and Mohamed, Zaharuddin (2019) Sliding Mode Control For Altitude And Attitude Stabilization Of Quadrotor UAV With External Disturbance. Indonesian Journal Of Electrical Engineering And Informatics (IJEEI), 7 (2). pp. 203-210. ISSN 2089-3272

Mohd Daud, Mohd Ahadlin and Md Zahir, Nur Aizatul ‘Ain and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan and Ab Ghani, Ahmad Fuad (2019) Optimisation of hybrid composite reinforced carbon and glass using AHP method. Defence S and T Technical Bulletin, 12 (1). pp. 101-112. ISSN 1985-6571

Mohd Foozy, Cik Feresa and Samsudin, Nur’Ain Maulat and Alias, Nabilah and Shamala, Palaniappan and Othman, Nur Fadzilah and Wan Din, Wan Isni Sofiah (2019) Youtube Spam Detection Framework Using Naïve Bayes And Logistic Regression. Indonesian Journal of Electrical Engineering and Computer Science, 14 (3). pp. 1508-1517. ISSN 2502-4752

Mohd Fuad, Mohamad Aqil and Zohedi, Fauzal Naim and Ghazali, Rozaimi and Ahmad Izzuddin, Tarmizi and Ab. Ghani, Mohd Ruddin (2019) Combining of transfer learning with faster-RCNN for Aedes Aegyti larvae detection. International Journal Of Recent Technology And Engineering (IJRTE), 8 (2S6). pp. 779-782. ISSN 2277-3878

Mohd Hisham, Mohd Hizwan and Aripin, Muhamad Afzamiman and Saud, Muhammad Sukri and Ishar, Mohamad Izzuan and Mohamed Sultan, Al Amin (2019) Reliability Index Of Creative Thinking Among Electrical Engineering Lecturers. International Journal Of Advanced Science And Technology, 28 (13). pp. 247-252. ISSN 2005-4238

Mohd Noh, Mohd Syahrin Amri and Wagiman, Mohammad Ikhwan Shah and Kadmin, Ahmad Fauzan and Zakaria, Zahriladha (2019) Development Of Residential Energy Harvesting System With Arduino Application. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 11 (2). pp. 55-58. ISSN 2180-1843

Mohd Noor, Faza Syahirah and Zakaria, Zahriladha and Lago, Herwansyah and Meor Said, Maizatul Alice (2019) Dual-Band Aperture Coupled Antenna With Harmonic Suppression Capability. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 60-67. ISSN 1693-6930

Mohd Noor, Faza Syahirah and Zakaria, Zahriladha and Lago, Herwansyah and Meor Said, Maizatul Alice (2019) Dual-Band Aperture-Coupled Rectenna For Radio Frequency Energy Harvesting. International Journal Of RF And Microwave Computer-Aided Engineering, 29 (1). pp. 1-9. ISSN 1096-4290

Mohd Raus, Teh Zanariah and Yusoff, Marianna and Balakrishnan, Subatira (2019) Technical report writing in engineering studies. LSP International Journal, 6 (2). pp. 45-59. ISSN 2601-002X

Mohd Rosli, Mohd Afzanizam and Mohd Zaki, Danial Shafiq and Abdul Rahman, Fatiha and Sepeai, Suhaila and Abdul Hamid, Nurfaizey and Nawam, Muhammad Zaid (2019) F-Chart Method For Design Domestic Hot Water Heating System In Ayer Keroh Melaka. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 56 (1). pp. 59-67. ISSN 2289-7879

Mohd Sa'at, Fatimah Al-Zahrah and Shikh Anuar, Fadhilah and Mustaffa, Siti Hajar Adni (2019) Numerical And Experimental Investigations Of The Oscillatory Flow Inside Standing Wave Thermoacoustic System At Two Different Flow Frequencies. CFD Letters, 11 (8). pp. 1-15. ISSN 2180-1363

Mohd Saad, Norhashimah and Abdul Rahman, Nor Nabilah Syazana and Abdullah, Abdul Rahim and Ahmat, Norun Najjah (2019) A Review Of Vision Based Defect Detection Using Image Processing Techniques For Beverage Manufacturing Industry. Jurnal Teknologi, 81 (3). pp. 33-47. ISSN 2180-3722

Mohd Saad, Norhashimah and Abdullah, Abdul Rahim and Mohd Noor, Niza Suzaini and Mohd Ali, Nursabillilah (2019) Automated Segmentation And Classification Technique For Brain Stroke. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1832-1841. ISSN 2088-8708

Mohd Saad, Norhashimah and Abdullah, Abdul Rahim and Mohd Noor, Niza Suziani and Hamid, Nurul Atiqah and Anuar, Muhammad Syahmi and Mohd Ali, Nursabillilah (2019) Automated Medical Surgical Trolley. International Journal of Electrical and Computer Engineering, 9 (3). pp. 1822-1831. ISSN 2088-8708

Mohd Saad, Norhashimah and Mohd Saad, Wira Hidayat and Zainal, Nur Azmina and Abdullah, Abdul Rahim and Mohd Noor, Nor Shahirah and Yaakub, Muhamad Faizal (2019) Automated brain tumor segmentation and classification for MRI analysis system. Indonesian Journal Of Electrical Engineering And Computer Science, 15 (3). pp. 1337-1344. ISSN 2502-4752

Mohd Saat, Fatimah Al Zahrah and Johari, Dahlia and Mat Tokit, Ernie (2019) DeltaE modelling and experimental study of a standing wave thermoacoustic test rig. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 60 (2). pp. 155-165. ISSN 2289-7879

Mohd Sapuan, Salit and Ilyas, Rushdan Ahmad and Jumaidin, Ridhwan and Shaharuzaman, Mohd Adrinata and Ibrahim, Rushdan and Abral, Hairul and Ishak, M.R. and Zainudin, E.S. and Asrofi, Mochamad and Mahmud, Siti Nur Atikah and Muhammad Huzaifah, Muhammad Roslim and Mohd Radzi, Ali and Noor Azammi, Abdul Murat and Mohd Nurazzi, Norizan and Syafri, Edi and Herlina Sari, Nasmi and Norrrahim, Mohd Nor Faiz (2019) Sugar Palm (Arenga Pinnata (Wurmb.) Merr) Cellulosic Fibre Hierarchy: A Comprehensive Approach From Macro To Nano Scale. Journal of Materials Research and Technology, 8 (3). pp. 2753-2766. ISSN 2238-7854

Mohd Sapuan, Salit and Mohammad Taha, Mastura and Muhammad, Noryani and Moh Zuhri, Mohd Yusoff and Zainudin, Edi Syams (2019) Material Selection Of Natural Fibre Using A Stepwise Regression Model With Error Analysis. Journal of Materials Research and Technology, 8 (3). pp. 2865-2879. ISSN 2238-7854

Mohd Shah, Hairol Nizam and Abdollah, Mohd Fairus and Kamis, Zalina and Mohd Aras, Mohd Shahrieel and Sallehoddin, Muhammad Zakwan Akmal and Baharon, Mohd Rizuan (2019) Develop and implementation of pc based controller for humanoid robot using digital potentiometer. Indonesian Journal of Electrical Engineering and Computer Science, 15 (1). pp. 104-112. ISSN 2502-4752 (In Press)

Mohd Shah, Hairol Nizam and Baharon, Mohd Rizuan and Rajikon, Muhd Akmal Noor and Kamis, Zalina and Kang, Hui Hwa and Ahmad, Azhar (2019) Vision based position control for vertical take-off and landing (VTOL) using one singular landmark. Modern Applied Science, 13 (9). pp. 33-42. ISSN 1913-1844

Mohd Shah, Hairol Nizam and Kamis, Zalina and Abdollah, Mohd Fairus and Khamis, Alias and Mohd Aras, Mohd Shahrieel and Baharon, Mohd Rizuan and Ifwat, Nor Azni (2019) Vision based obstacle avoidance for mobile robot using optical flow process. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (4S). pp. 466-470. ISSN 2278-3075

Mohd Shah, Hairol Nizam and Kamis, Zalina and Shukor, Ahmad Zaki and Baharon, Mohd Rizuan and Sulaiman, Marizan and Wan Azahari, Wan Nur Farhana (2019) Optimum utilization of energy consumption in arm robot. Modern Applied Science, 13 (5). pp. 57-69. ISSN 1913-1844

Mohd Shah, Hairol Nizam and Kamis, Zalina and Sulaiman, Marizan and Ab Rashid, Mohd Zamzuri and Mohd Aras, Mohd Shahrieel and Ahmad, Azhar (2019) Characteristics Of Butt Welding Imperfections Joint Using Co-Occurrence Matrix. Indian Journal Of Geo-Marine Sciences (IJMS), 48 (7). pp. 1164-1169. ISSN 0379-5136

Mohd Shah, Hairol Nizam and Lee, Zhong Zhen and Kamis, Zalina and Ahmad, Azhar and Baharon, Mohd Rizuan (2019) Mobile robot navigation system vision based through indoor corridors. International Journal of Mechanical & Mechatronics Engineering, 19 (5). pp. 158-167. ISSN 2227-2771

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Mohamad Isa, Kamarul Syaffiq and Kamis, Zalina and Baharon, Mohd Rizuan (2019) Optimization Of Energy Consumption In KUKA KR 16 Articulated Robot Manipulator. International Journal of Recent Technology and Engineering, 8 (3). pp. 6470-6476. ISSN 2277-3878

Mohd Shah, Hairol Nizam and Yap, Sher Kee and Kamis, Zalina and Baharon, Mohd Rizuan and Ab Rashid, Mohd Zamzuri (2019) Automated quality inspection on tile border detection using vision system. International Journal Of Recent Technology And Engineering (IJRTE), 8 (3). pp. 3737-3745. ISSN 2277-3878

Mohd Tumari, Mohd Zaidi and Saat, Shahrizal and Kasno, Mohammad `Afif and Johal, Muhammad Syahrani and Bahari, Muhamad Falihan and Ahmad, Mohd Ashraf (2019) Single input fuzzy logic controller for liquid slosh suppression. International Journal Of Electrical Engineering And Applied Sciences (IJEEAS), 2 (1). pp. 45-52. ISSN 2600-7495

Mohd Tumari, Mohd Zaidi and Zainal Abidin, Amar Faiz and A Subki, A Shamsul Rahimi and Ab Aziz, Ab Wafi and Ahmad, Mohd Ashraf and Ghazali, Mohd Riduwan (2019) PSO Fined-Tuned Model-Free PID Controller With Derivative Filter For Buck-Converter Driven Dc Motor. International Journal of Recent Technology and Engineering, 8 (3S). pp. 1-5. ISSN 2277-3878

Mohd Yassim, Halyani and Hussin, Mohamed Saiful Firdaus and Mohd Ali, Nursabillilah and Fauzi, Muhammad Ashraf and Ismail, Zulkefli and Rosli, Fatin Farhana (2019) Conceptual Design Approach And Ergonomics Analysis Of Fire Resistant Purpose Shield. ARPN Journal Of Engineering And Applied Sciences, 14 (6). pp. 1264-1268. ISSN 1819-6608

Mokhtar, Nur Hazwani and Mohamed Nor, Mohd Khairi and Hamzah, Luqman Hakim and Che Mamat, Ahmad Zul Husni and Abdul Munir, Fudhail (2019) Priority Factor Influencing Public Interest In Owning Vehicle With AEB System. Journal of the Society of Automotive Engineers Malaysia, 3 (2). pp. 139-147. ISSN 2600-8092

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Alkahari, Mohd Rizal and Md Fauadi, Muhammad Hafidz Fazli and Zainal Bakri, Siti Farhana (2019) Indoor Air Concentration From Selective Laser Sintering 3D Printer Using Virgin Polyamide Nylon (PA12) Powder: A Pilot Study. International Journal of Integrated Engineering, 11 (5). pp. 140-149. ISSN 2229-838X

Muhamad Damanhuri, Amir Abdullah and Omar, Mohammad Rafi and Hariri, Azian and Md Fauadi, Muhammad Hafidz Fazli and Alkahari, Mohd Rizal (2019) Emission Of Selected Environmental Exposure From Selective Laser Sintering (SLS) Polyamide Nylon (PA12) 3D Printing Process. Journal of Safety, Health and Ergonomics, 1 (1). pp. 1-6. ISSN 2682-745X

Muhamad Muaz Nasaruddin, Muhamad Muaz Nasaruddin and Sheikh Md Fadzullah, Siti Hajar and Omar, Ghazali (2019) Preliminary investigation on multi-walled carbon nanotubes filled epoxy composite as electrically conductive adhesive. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 28-32. ISSN 2277-3878

Muhd Ridzuan Mansor, Muhd Ridzuan and Taufiq, M.J. and Mustafa, Zaleha and Jumaidin, Ridhwan and Mohammad Taha, Mastura and Firdaus, Firdaus, H. M.S. and Basori, Basori (2019) Thermal And Mechanical Behaviour Of Recycled Polypropylene/Polyethylene Blends Of Rejected-Unused Disposable Diapers. Journal of Advanced Manufacturing Technology (JAMT), 13 (3). pp. 13-23. ISSN 1985-3157

Murong, Luo and Al-Shami, Samer Ali Hussein and Mansor, Nusaibah (2019) The development of SMEs in China: Opportunities and Challenges. Opcion, 35. pp. 2899-2921. ISSN 1012-1587

Mustapha, Nik Mohd Zaitul Akmal and Suid, Mohd Helmi and Raja Ismail, Raja Mohd Taufika and Nasir, Ahmad Nor Kasruddin and Ahmad, Mohd Ashraf and Mohd Tumari, Mohd Zaidi and Jui, Julakha Jahan (2019) A Data-Driven PID Controller For Flexible Joint Manipulator Using Normalized Simultaneous Perturbation Stochastic Approximation. Journal of Advanced Manufacturing Technology, 13 (2). pp. 143-154. ISSN 1985-3157

Mutar, Modhi Lafta and Mohd Aboobaider, Burhanuddin and Hameed, Asaad Shakir and Yusof, Norzihani (2019) Enhancing Solutions Of Capacity Vehicle Routing Problem Based On An Improvement Ant Colony System Algorithm. Journal Of Advanced Research In Dynamical And Control Systems, 11 (1). pp. 1362-1374. ISSN 1943-023X

Muthusamy, Priya Devi and Sundaraj, Kenneth and Abd Manap, Nurulfajar (2019) Computerized Acoustical Techniques For Respiratory Flow-Sound Analysis: A Systematic Review. Artificial Intelligence Review, 53. pp. 3501-3574. ISSN 0269-2821

Nabi, Fizza Ghulam and Sundaraj, Kenneth and Chee, Kiang Lam (2019) Identification Of Asthma Severity Levels Through Wheeze Sound Characterization And Classification Using Integrated Power Features. Biomedical Signal Processing and Control, 52. 302 - 311. ISSN 1746-8094

Nabi, Fizza Ghulam and Sundaraj, Kenneth and Chee, Kiang Lam and Palaniappan, Rajkumar (2019) Analysis Of Wheeze Sounds During Tidal Breathing According To Severity Levels In Asthma Patients. Journal of Asthma, 57 (4). 353- 365. ISSN 0277-0903

Nabi, Fizza Ghulam and Sundaraj, Kenneth and Chee, Kiang Lam and Palaniappan, Rajkumar (2019) Characterization And Classification Of Asthmatic Wheeze Sounds According To Severity Level Using Spectral Integrated Features. Computers in Biology and Medicine, 104. 52 - 61. ISSN 0010-4825

Nabil Salem Yahya Farah, Nabil Salem Yahya Farah and Mat Lazi, Jurifa and Ibrahim, Zulkifilie and Jidin, Auzani and Talib, Md Hairul Nizam and Mohd Shah, Nor Shahida and Abdullah, Qazwan (2019) A Novel Self-Tuning Fuzzy Logic Controller Based Induction Motor Drive System: An Experimental Approach. IEEE Access, 7. pp. 68172-68184. ISSN 2169-3536

Nadzir, Mohd Shahrul and Cain, Michelle and Ahmad, Mohd Riduan and Yusop, Norbayah and Robinson, Andrew D. and Bolas, Conor Gordon and Harris, Neil R.P. and Parnikoza, Ivan Yu and Salimun, Ester and Mustafa, Emienour Muzalina and Alhasa, Kemal Maulana and Zainuddin, M. H.M. and Ghee, O. C. and Morris, Kenobi Isima and Khan, Md Firoz and Latif, Mohd Talib and Wallis, Benjamin M. and Cheah, Wee and Zainudin, Siti Khalijah and Hussin, Wan M.Rauhan and Salleh, Sarahaizad Mohd and Hamid, Haris Hafizal Abd and Goh, Thian Lai and Uning, Royston and Bakar, Mohd Aftar Abu and Ariff, Noratiqah Mohd and Tuah, Z. and Wahab, Mahamad Noor and Foong, Swee Yeok and Abu Samah, Azizan and Chenoli, Sheeba Nettukandy and Wan Johari, Wan Lutfi and Zain, Che Radziah Mohd and Rahman, Nasaruddin Abdul and Rosenstiel, Todd N. and Yusoff, Abdul Hafidz and Sabuti, Asnor Azrin and Alias, Siti Aisyah Binti and Mohd Noor, Ahmad Yunus (2019) Isoprene hotspots at the Western Coast of Antarctic Peninsula During MASEC'16. Polar Science, 20. pp. 63-74. ISSN 1873-9652

Narayanamurthy, Vigneswaran and Maruthu Pandiyan, Sushmitha and Kiruba Sebatiny, Sebastin Solomon Kenned and Thenra, Jeyasri and M, Anisha and Kannan, Anusha devi (2019) Blood Flow Separator Design In Passive Lab-On-Chip Device. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (2S2). pp. 947-951. ISSN 2278-3075

Nassani, Abdelmohsen A. and Qureshi, Muhammad Imran and Qayyum, Shazia and Aldakhil, Abdullah Mohammed and Qazi Abro, Muhammad Moinuddin and Zaman, Khalid (2019) Management Of Various Socio-Economic Factors Under The United Nations Sustainable Development Agenda. Resources Policy, 64. pp. 1-13. ISSN 0301-4207

Nawawi, Ahmad and Kamat, Seri Rahayu and Wan Mahmood, Wan Hasrulnizzam (2019) Lean Practices For Waste Prioritising In Machining Based Product. International Journal of Mechanical and Production Engineering Research and Development, 9 (5). pp. 305-318. ISSN 2250-2378

Nazir, Faridah and Omar, Norliza and Jano, Zanariah and Kamarudin, Norzai Shahida (2019) Utilizing Cerlis Model in improving creative writing skills. International Journal Of Recent Technology And Engineering (IJRTE), 8 (2S11). pp. 696-700. ISSN 2277-3878

Ng, Lin Feng and Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Woo, Xiu Juan and Siva, Irulappasamy (2019) The effects of bonding temperature and surface roughness on the shear strength of bonded aluminium laminates using polypropylene based adhesive. Journal of Advanced Manufacturing Technology, 13 (2). pp. 113-127. ISSN 1985-3157

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. (2019) Interaction between two inclined cracks in bonded dissimilar materials. ASM Science Journal, 12 (6). pp. 167-173. ISSN 1823-6782

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. (2019) Stress intensity factor for a thermally insulated crack in bonded dissimilar materials. ASM Science Journal, 12 (5). pp. 98-106. ISSN 1823-6782

Nik Long, Nik Mohd Asri and Hamzah, Khairum and Senu, Norazak and Eshkuvatov, Zainiddin K. and Ilias, Mohd Rijal (2019) Stress intensity factors for a crack in bonded dissimilar materials subjected to various stresses. Universal Journal of Mechanical Engineering, 7 (4). pp. 172-182. ISSN 2332-3353

Nik Long, Nik Mohd Asri and Senu, Norazak and Hamzah, Khairum and Eshkuvatov, Zainiddin K. (2019) Stress intensity factor for multiple cracks in bonded dissimilar materials using hypersingular integral equations. Applied Mathematical Modelling, 73. pp. 95-108. ISSN 0307-904X

Nirmal, Umar and Koh, B. X. and Yaakob, Mohd Yuhazri (2019) Developments on baby strollers over the last decade. Current Journal of Applied Science and Technology, 33 (6). pp. 1-25. ISSN 2457-1024

Nor Shah, Mohd Badril and Zailan, Norfahaniza and Zainal Abidin, Amar Faiz and Mohd Ab Halim, Mohd Firdaus and Mohd Annuar, Khalil Azha and Azahar, Arman Hadi and Harun, Mohamad Haniff and Yaakub, Muhamad Faizal (2019) PID-Based Temperature Control Device For Electric Kettle. International Journal of Electrical and Computer Engineering, 9 (3). pp. 1683-1693. ISSN 2088-8708

Nordin, Abdul Khahar and Ab Wahab, Norfariza and Sebastian, Teresa Senatia (2019) Design And Development Of Waterjet Clamping Based On Machining Performance. ARPN Journal of Engineering and Applied Sciences, 14 (12). pp. 2315-2319. ISSN 1819-6608

Omar, Mohd Firdaus and Ghazali, Rozaimi and Aripin, Muhamad Khairi and Soon, Chong Chee and Saadon, Intan Mastura (2019) Analysis Of A Linear Design For A Sports Utility Vehicle In Slalom Manoeuvres. International Journal of Mechanical Engineering and Robotics Research, 8 (2). pp. 246-253. ISSN 2278-0149

Omar, Norliza and Jano, Zanariah and Ahamat, Amiruddin and Mat Aris, Azman and Al-Shami, Samer Ali Hussein (2019) Work-Life Balance Of Women Entrepreneurs (Wlbwe): A Model. International Journal Of Innovative Technology And Exploring Engineering, 9 (1). pp. 2005-2011. ISSN 2278-3075

Omar, Rosli and Al-Hiealy, Mohammed Rasheed Jubair and Low, Zheng Kai and Sulaiman, Marizan (2019) Design And Development Of Active Power Filter For Harmonic Minimization Using Synchronous Reference Frame (SRF). ARPN Journal Of Engineering And Applied Sciences, 14 (2). pp. 476-484. ISSN 1819-6608

Omar, Rosli and Sulaiman, Marizan and Abd Halim, Wahidah and Al-Hiealy, Mohammed Rasheed Jubair and Johan, Norsahjatulnizam and Mies, Nizam and Krismadinata, Krismadinata (2019) A New Algorithm With Different Modulation Index (Mi) In Cascaded H-Bridge Multilevel Inverters (CHB MLIS). Journal Of Theoretical And Applied Information Technology, 97 (3). pp. 856-866. ISSN 1992-8645

Omar, Rosli and Sulaiman, Marizan and Jubair Al-Hiealy, Mohammed Rasheed and Abd Halim, Wahidah (2019) Control Of A Super-Capacitor As Energy Storage With Thirteen-Level Inverter. ARPN Journal Of Engineering And Applied Sciences, 14 (20). pp. 3544-3553. ISSN 1819-6608 (In Press)

Osman, Mohd Hairizal and Mokhtar, Muhammad Faiz and Abu Bakar, Mohd Hadzley and Hamed, Muhammad Fitri Naim and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Aziz, A. A. and Noorazizi, S. (2019) Effect Of Hydraulic Pressure On Hardness, Density, Tool Wear And Surface Roughness In The Fabrication Of Alumina Based Cutting Tool. Journal of Advanced Manufacturing Technology, 13 (1). pp. 23-37. ISSN 2289-8107

Othman, Adib and Shairi, Noor Azwan and Zakaria, Zahriladha and Zobilah, Abdullah Mohammed Saghir and Shaari, Nur Ishmah Sabirah (2019) Design Of Compact Ultra Wideband Antenna For Microwave Medical Imaging Application. Indonesian Journal of Electrical Engineering and Computer Science, 15 (3). pp. 1197-1202. ISSN 2502-4752

Othman, Muhammad Azri and Minhat, Mohamad and Jamaludin, Zamberi (2019) A Framework Of Next Generation Adaptive CNC Controller. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (11S2). pp. 288-293. ISSN 2278-3075

Othman, Zuraini and Abdullah, Azizi and Kasmin, Fauziah and Syed Ahmad, Sharifah Sakinah (2019) Road Crack Detection Using Adaptive Multi Resolution Thresholding Techniques. Telkomnika (Telecommunication Computing Electronics and Control), 17 (4). pp. 1874-1881. ISSN 1693-6930

Othman, Zuraini and Kasmin, Fauziah and Syed Ahmad, Sharifah Sakinah and Abdullah, Azizi (2019) Extrema Points Application In Determining Iris Region Of Interest. Educatum Journal Of Science, Mathematics And Technology (EJSMT), 6 (1). pp. 35-40. ISSN 2289-7070

Padmanathan, Vinothini and Halim, Isa and Too, Yi Wei (2019) Application Of Pressure Biofeedback Unit As Part Of Ergonomics Assessment Tools For Assessing Back Pain Among Computer Users. International Journal Of Advanced Trends In Computer Science And Engineering, 8 (3). pp. 879-882. ISSN 2278-3091

Parnon, Mohamad Afiq Amiruddin and Abdul Rasib, Amir Hamzah (2019) Analysis On NOx Formation Of Biofuels. International Journal Of Engineering & Technology, 8 (1.1). pp. 98-103. ISSN 2227-524X

Pay, Jun Liew and Jingsi, Wang (2019) Repair Of Ultrasonic Machining Induced Surface/Subsurface Cracks By Laser Irradiation. Optics & Laser Technology, 111. pp. 497-508. ISSN 0030-3992

Pop, Ioan Mihai and Waini, Iskandar and Ishak, Anuar (2019) Flow And Heat Transfer Along A Permeable Stretching/Shrinking Curved Surface In A Hybrid Nanofluid. Physica Scripta, 94 (10). pp. 1-13. ISSN 0031-8949

Pop, Ioan Mihai and Waini, Iskandar and Ishak, Anuar (2019) Unsteady Flow And Heat Transfer Past A Stretching/Shrinking Sheet In A Hybrid Nanofluid. International Journal of Heat and Mass Transfer, 136. pp. 288-297. ISSN 0017-9310

Pusppanathan, Jaysuman and Jamil Alsayaydeh, Jamil Abedalrahim and Zulkiflli, Nur Amira and Soeed, Kamaruzaman and Zulkapri, Izwyn and Yahya, Azli and Idris, Muhammad Iqbal Tariq and Phang, Fatin Aliah and Nawi, Nina Diana and Mohd Muji, Siti Zarina and Ghazali, Zulkipli and Bain, Mohd Yazid (2019) Visual Signal Device (VSD) For Deaf Sports Athletics Malaysia. Journal of Tomography System & Sensors Application, 2 (2). pp. 55-58. ISSN 2636-9133

Putra, Azma and Mosa, Ali Ibrahim and Ramlan, Roszaidi and Prasetiyo, Iwan and Jameel, Esraa Al-Amer (2019) Theoretical model of absorption coefficient of an inhomogeneous MPP absorber with multi-cavity depths. Applied Acoustics, 146. 409 - 419. ISSN 0003-682X

Quah, Jit Shen and Miskon, Muhammad Fahmi and Mohd Annuar, Khalil Azha (2019) Object Isolation With Minimal Impact Towards The Object Of Interest In A Complex Environment Using Manipulation Primitives. International Journal Of Recent Technology And Engineering (IJRTE), 8 (3S2). pp. 219-224. ISSN 2277-3878

Qureshi, Muhammad Imran and Elashkar, Elsayed Elsherbini and Shoukry, Alaa Mohamd and Aamir, Alamzeb and Mahmood, Nik Hasnaa Nik and Md. Rasli, Amran and Zaman, Khalid (2019) Measuring the ecological footprint of inbound and outbound tourists: Evidence from a panel of 35 countries. Clean Technologies and Environmental Policy, 21 (10). 1949 - 1967. ISSN 1618-954X

Qureshi, Muhammad Imran and Rasiah, Rajah and Al-Ghazali, Basheer Mohammed and Haider, Maqsood and Jambari, Hanifah and Iswan, Iswan and Sasmoko, Sasmoko (2019) Modeling Work Practices Under Socio-Technical Systems For Sustainable Manufacturing Performance. Sustainability (Switzerland), 11 (16). 2- 19. ISSN 2071-1050

R. Mohamed, R. Mohamed and A. Mohamed, A. Mohamed and Md Yusop, Azdiana and Sulaiman, Noor Asyikin (2019) Load Dependence Behavior Of The Thermoelectric Module Energy Harvesting System By Inverse Dynamic Analysis–Maximum Power Point Tracking. International Journal of Engineering & Technology, 8 (1.7). pp. 138-145. ISSN 2227-524X

Rabbi, Mohammad Fazle and Ghazali, Kamarul Hawari and Sundaraj, Kenneth and Altwijr, Omar and Alqahtani, Mahdi and Rahman, Sam Matiur and Md. Asraf, Ali and Taha, Zahari and Ahamed, Nizam Uddin (2019) Significance Of Electromyography In The Assessment Of Diabetic Neuropathy. Journal of Mechanics in Medicine and Biology, 19 (3). pp. 1-15. ISSN 0219-5194

Radin Umar, Radin Zaid and Ahmad, Nadiah and Halim, Isa and Lee, Poh Yan and Hamid, Malek (2019) Design And Development Of An Ergonomic Trolley-Lifter For Sheet Metal Handling Task: A Preliminary Study. Safety and Health at Work, 10 (3). 327 - 335. ISSN 2093-7911

Radin Umar, Radin Zaid and Chai, Fong Ling and Halim, Isa and Abdullasim, Nazreen and Ahmad, Nadiah and Malek, Hamid (2019) Occupational Wrist Postural Assessment And Monitoring System: Development And Initial Validation. Journal Of Engineering Science and Technology, 14 (6). pp. 3421-3436. ISSN 1823-4690

Radzid, Amirul Ramzani and Azmi, Mohd Sanusi and A. Jalil, Intan Ermahani and Nordin, Radzuan and Arbain, Nur Atikah (2019) Multiform Frame Shape Extraction Using Neighbouring Pixel Be-Haviors For Mushaf Al-Quran. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). 251 - 256. ISSN 2278-3091

Raja Abdullah, Raja Izamshah and Ramli, Azlan and Kasim, Mohd Shahir and Mohd Zakaria, Muhammad Akmal and Ding, Song Lin (2019) Rotary ultrasonic assisted machining of mould and die material. Journal of Advanced Manufacturing Technology (JAMT), 13 (2(1)). pp. 1-14. ISSN 1985-3157

Raja Abdullah, Raja Izamshah and Zakaria, Akmal and Mohd Shahir, Kasim and Ibrahim, Mohamad Halim (2019) Enhancing the Productivity of Wire Electrical Discharge Machining Toward Sustainable Production by using Artificial Neural Network Modelling. EMITTER International Journal of Engineering Technology, 7 (1). pp. 261-274. ISSN 2443-1168

Raja Ikram, Raja Rina and Abd Samad, Rosleen and Salahuddin, Lizawati and Abd Ghani, Mohd Khanapi and Ab Hamid, Raihan (2019) Development Of Conceptual Information Systems Framework Using Grounded Theory. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 749-754. ISSN 2278-3075

Raja Othman, Raja Nor Firdaus Kashfi and Abdul Shukor, Fairul Azhar and Sulaiman, Farina and Mat Isa, Siti Zulaika and Vaithilingam, Aravind Chockalingam and Norhisam, Misron (2019) Frequency characteristics of slot-less and slot type linear oscillatory actuator for food processing application. Journal Of Engineering Science And Technology, 14 (SI). pp. 22-32. ISSN 1823-4690

Raja Othman, Raja Nor Firdaus Kashfi and Abdullah, Nurfaezah and Ahamat, Amiruddin and Md Zuki, Nor Aishah and Abdul Shukor, Fairul Azhar and Abdul Karim, Kasrul (2019) Assessing Monstrous Fan In Malaysia: Present And Future. Journal Of Open Innovation: Technology, Market, And Complexity, 5 (1). pp. 1-19. ISSN 2199-8531

Ramlee, Ridza Azri and Yong, Eric Law Chee and Subramaniam, Siva Kumar and Khmag, Asem and Rahman, Ahmad ShukriFazil (2019) Home Switching Using IoT System Via Telegram And Web User Interface. International Journal of Recent Technology and Engineering, 8 (2S6). pp. 814-819. ISSN 2277-3878

Ramli, Mohamad Raziff and Abal Abas, Zuraida and Desa, Mohammad Ishak and Zainal Abidin, Zaheera and Al Azzam, Malik Bader Hasan (2019) Enhanced convergence of Bat Algorithm based on dimensional and inertia weight factor. Journal of King Saud University - Computer and Information Sciences, 31 (4). pp. 452-458. ISSN 1319-1578

Rasib, Abd Wahid and Abu Sari, Mohd Yazid and K.M., Nazrin and Ahmad, Asmala and Abu Sari, Nasruddin and Dollah @ Md Zain, Rozilawati and Mohd Ali, Hamzah and Mohd Yusoff, Abd Razak (2019) Terrain mapping from unmanned aerial vehicles. Journal Of Advanced Manufacturing Technology (JAMT), 13 (1). pp. 1-16. ISSN 1985-3157

Rasin, Zulhani and Daud, Faiz and Md Zan, Muhammad Amruha and Abd Rani, Natrah and Md Yazid, Mohd Akhmal Syafi (2019) Design and Development of Integrated Stationary Cycling Charger for Promoting Healthy Lifestyle. International Journal of Engineering and Advanced Technology (IJEAT), 9 (2). pp. 2966-2971. ISSN 2249-8958

Rasin, Zulhani and Jidin, Auzani and Muhammad, Masitah and Raja Othman, Raja Nor Firdaus Kashfi (2019) Modelling and simulation of hybrid energy storage for QZSI inverter applied in induction motor drive. International Journal Of Recent Technology And Engineering (IJRTE), 8 (3). pp. 3462-3468. ISSN 2277-3878

Razak, Nurul Hanim and Hashim, Haslenda and Yunus, Nor Alafiza and Klemeš, Jiří Jaromír and Phoon, Li Yee (2019) Optimisation Of Ternary Green Diesel Blends For Diesel/Palm Methyl Ester/Alcohol Using Product Design Optimization. Chemical Engineering Transactions, 72. pp. 391-396. ISSN 2283-9216

Riaz, Adnan and Batool, Saima and Md Saad, Mohd Shamsuri (2019) The missing link between high performance work practices and perceived organizational politics. RAE Revista de Administracao de Empresas, 59 (2). pp. 82-94. ISSN 0034-7590

Roslan, Ameer Farhan and Salehuddin, Fauziyah and Mohd Zain, Anis Suhaila and Kaharudin, Khairil Ezwan and Haroon, Hazura and Abdul Razak, Hanim and Idris, Siti Khadijah and Ahmad, Ibrahim (2019) Comparative High-K Material Gate Spacer Impact In DG-FinFET Parameter Variations Between Two Structures. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 573-580. ISSN 2502-4752

Rumaisa, Fitrah and Basiron, Halizah and Sa'aya, Zurina (2019) A check on annotation in sentiment research. International Journal of Recent Technology and Engineering, 8 (2S8). 1346 - 1350. ISSN 2277-3878

Rumaisa, Fitrah and Basiron, Halizah and Saaya, Zurina (2019) Development of multilingual social media data corpus for sentiment classification. Journal of Advanced Research in Dynamical and Control Systems, 11 (3). 286 - 293. ISSN 1943-023X

Rumaisa, Fitrah and Basiron, Halizah and Saaya, Zurina and Khamis, Noorli (2019) A literature research on machine learning techniques used for training annotated corpus. International Journal of Recent Technology and Engineering, 8 (2S8). pp. 1331-1337. ISSN 2277-3878

Rumaisa, Fitrah and Saaya, Zurina and Khamis, Noorli and Basiron, Halizah (2019) Development of multilingual social media data corpus: Development and evaluation. International Journal Of Innovation, Creativity And Change, 6 (5). pp. 1-14. ISSN 2201-1323

S.M. Kayser Azam, S.M. Kayser Azam and Muhammad I. Ibrahimy, Muhammad I. Ibrahimy and S.M.A. Motakabber, S.M.A. Motakabber and Hossain, A K M Zakir (2019) Plans For Planar: Phase-Noise Reduction Techniques In Voltage-Controlled Oscillators. IEEE Microwave Magazine, 20 (11). pp. 92-108. ISSN 1527-3342

Saat, Shahrizal and Mohd Fozi, Airini An Nadrah and Saealal, Muhammad Salihin and Abd Rashid, Wan Norhisyam and Mohd Sani, Farees Ezwan (2019) Hector SLAM 2D Mapping For Simultaneous Localization And Mapping (SLAM). Journal Of Engineering And Applied Sciences, 14 (16). pp. 5610-5615. ISSN 1816-949X

Saat, Shahrizal and Zakaria, Nur Shahirah and Mohd Tumari, Mohd Zaidi and Hussin, Mohamed Saiful Firdaus and Muhammad Mustafa, Ahmad Nizamuddin and Adip, Mohd Anuar (2019) Crosswind Monitoring And Detection System At Highway With IoT Features. Journal Of Engineering And Applied Sciences, 14 (13). pp. 4559-4563. ISSN 1816-949X

Sachit, Fadhil Abdulameer and Mohd Rosli, Mohd Afzanizam and Tamaldin, Noreffendy and Misha, Suhaimi and Abdullah, Amira Lateef (2019) Numerical Investigation And Performance Analysis Of Photovoltaic Thermal PV/T Absorber Designs: A Comparative Study. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 58 (1). pp. 62-77. ISSN 2289-7879

Salahuddin, Lizawati and Hashim, Ummi Rabaah and Ismail, Nor Haslinda and Raja Ikram, Raja Rina and Ismail, Zuraini and Abdul Rahim, Fiza and Hassan, Noor Hafizah (2019) Healthcare Practitioner Behaviours That Influence Unsafe Use Of Hospital Information Systems. Health Informatics Journal, 26 (1). pp. 420-434. ISSN 1460-4582

Salam, Zainal and Ramli, Mohd Zulkifli (2019) Analysis and experimental validation of partial shading mitigation in photovoltaic system using integrated DC–DC converter with maximum power point tracker. IET Renewable Power Generation, 13 (13). pp. 2356-2366. ISSN 1752-1416

Salam, Zainal and Ramli, Mohd zulkifli (2019) Performance evaluation of DC Power Optimizer (DCPO) for Photovoltaic (PV) system during partial shading. Renewable Energy, 139. pp. 1336-1354. ISSN 0960-1481

Salam, Zainal and Ramli, Mohd zulkifli and Bassi, Hussain and Sindi, Hatem and Rawa, Muhyaddin (2019) Hardware Approach To Mitigate The Effects Of Module Mismatch In A Grid-Connected Photovoltaic System: A Review. Energies, 12 (22). pp. 1-25. ISSN 1996-1073

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan and Mohd Zain, Anis Suhaila and Roslan, Ameer Farhan (2019) Geometric And Process Design Of Ultra-Thin Junctionless Double Gate Vertical MOSFETs. International Journal of Electrical and Computer Engineering, 9 (4). pp. 2863-2873. ISSN 2088-8708

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan and Roslan, Ameer Farhan and Mohammed Napiah, Zul Atfyi Fauzan and Mohd Zain, Anis Suhaila (2019) Performance Analysis Of Ultrathin Junctionless Double Gate Vertical MOSFETs. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1268-1278. ISSN 2302-9285

Salehuddin, Fauziyah and Kaharudin, Khairil Ezwan and Roslan, Ameer Farhan and Mohd Zain, Anis Suhaila (2019) Optimal Design Of Junctionless Double Gate Vertical MOSFET Using Hybrid Taguchi-GRA With ANN Prediction. Journal of Mechanical Engineering and Sciences, 13 (3). pp. 5455-5479. ISSN 2289-4659

Salehuddin, Fauziyah and Roslan, Ameer Farhan and Kaharudin, Khairil Ezwan and Mohd Zain, Anis Suhaila (2019) Effect Of Channel Length Variation On Analog And RF Performance Of Junctionless Double Gate Vertical Mosfet. Journal Of Engineering Science And Technology, 14 (4). pp. 2410-2430. ISSN 1823-4690

Salim, Norhafiz and Zainal Abidin, Mohamad Syamin and Azmi, Aimie Nazmin and Zambri, Nor Aira and Takao, Tsuji (2019) Frequency Control Reserve With Multiple Micro Grid Participation For Power System Frequency Stability. Indonesian Journal Of Electrical Engineering And Computer Science, 16 (1). pp. 59-66. ISSN 2502-4752

Salit, Mohd Sapuan and Mahmud, Siti Nur Atikah and Rushdan, Ahmad Ilyas and Zainudin, Edi Syams and Ishak, Mohamad Ridzwan and Ibrahim, Rushdan and A., Atiqah and Mohamed Nainar, Mohamed Ansari and Jumaidin, Ridhwan (2019) Degradation And Physical Properties Of Sugar Palm Starch/ Sugar Palm Nanofibrillated Cellulose Bionanocomposite. Polimery/Polymers, 64 (10). pp. 680-689. ISSN 0032-2725

Salit, Mohd Sapuan and Mustafa, Nuzaimah and Jawaid, Mohamed and Razali, Nadlene (2019) Microstructure And Mechanical Properties Of Unsaturated Polyester Composites Filled With Waste Rubber Glove Crumbs. Fibers and Polymers, 20 (6). pp. 1290-1300. ISSN 1229-9197

Salit, Mohd. Sapuan and H. N., Salwa and Mohammad Taha, Mastura and M. Y. M., Zuhri (2019) Analytic Hierarchy Process (AHP)-Based Materials Selection System For Natural Fiber As Reinforcement In Biopolymer Composites For Food Packaging. Bioresources, 14 (4). pp. 10014-10046. ISSN 1930-2126

Salleh, Mohd Shukor and Abd Rahman, Ammar and Othman, Intan Sharhida and Subramonian, Sivarao and Yahaya, Saifudin Hafiz and Siswanto, Nurhadi (2019) Investigation Of Wear And Corrosion Characteristics Of Short Heat Treated Thixoformed Aluminium Alloy. Journal of Advanced Manufacturing Technology, 13 (3). pp. 101-113. ISSN 1985-3157

Salleh, Mohd Shukor and Hashim, Hanizam and Yahaya, Saifudin Hafiz and Nurhadi, Siswanto (2019) Effect Of Magnesium Surfactant On Wettability Of Carbon Nanotube In A356 Alloy Composite. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 33-44. ISSN 1985-3157

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771

Samal, Purna B. and Zakaria, Zahriladha and Ping, Jack Soh (2019) Compact microstrip-based textile antenna for 802.15.6 Wban-UWB with full ground plane. International Journal of Antennas and Propagation, 2019. pp. 1-13. ISSN 1687-5869

Sameer, Alani and Lago, Herwansyah and Zakaria, Zahriladha (2019) A New Energy Consumption Technique For Mobile Ad-Hoc Networks. International Journal Of Electrical And Computer Engineering (IJECE), 9 (5). pp. 4147-4153. ISSN 2088-8708

Samsudin, Adam and Rodzi, Muhammad Amirun Mukmin and Zainal Abidin, Amar Faiz and Hasim, Nur Aiman Hanis and Azmi, Ezzatul Farhain (2019) The Evaluation Of Efficiency Of Different Types Of Fuel For Proton Car. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (11). pp. 1555-1558. ISSN 2278-3075

Saptari, Adi and Halim, Isa and Syed Mohamed, Muhammad Syafiq and Mohd Fauzi, Afifah (2019) Hand Parameters And Walking Stick Design: A Case Study Among Elderly Malaysians. International Journal Of Human And Technology Interaction (Ijhati), 3 (1). pp. 11-18. ISSN 2590-3551

Sapuan, S. M. and Mohammad Taha, Mastura and Muhammad, Noryani and Zuhri, Mohd Yusoff Moh and Zainudin, E. S. (2019) Material Selection Of A Natural Fibre Reinforced Polymer Composites Using An Analytical Approach. Journal of Renewable Materials, 7 (11). pp. 1165-1179. ISSN 2164-6341

Sarban Singh, Ranjit Singh and Nurdin, Muhammad Izzat and Wong, Yan Chiew (2019) Raspberry Pi Zero Wireless Monitoring System For Analyzing Solar Photovoltaic Panel. International Journal Of Innovative Technology And Exploring Engineering (IJITEE), 8 (8). pp. 2429-2433. ISSN 2278-3075

Sarban Singh, Ranjit Singh and Wong, Yan Chiew and Sarban Singh, Baljit Singh and Abbod, Maysam (2019) A New Fault Detection System Using Wireless Communication – Assisted With Analog Relays For Grid Electrical Lamp Pole Network. Journal Of Theoretical And Applied Information Technology, 97 (8). pp. 2359-2369. ISSN 1992-8645

Shaffiei, Zatul Alwani and Abal Abas, Zuraida and Md Yunos, Norhazwani and Amir Hamzah, Amir Syafiq Syamin Syah and Zainal Abidin, Zaheera and Chong, Kuan Eng (2019) Constrained Self-Adaptive Harmony Search Algorithm With 2-Opt Swapping For Driver Scheduling Problem Of University Shuttle Bus. Arabian Journal for Science and Engineering, 44 (4). pp. 3681-3698. ISSN 2193-567X

Shahbodin, Faaizah and Maria, Meylinda and Che Ku Mohd, Che Ku Nuraini and Jaafar, Nurul Amiera (2019) Supporting Future Career Of Autistic Learners Via Technology: Design And Development Of iBakery Courseware. Journal Of Technical Education And Training (JTET), 11 (3). pp. 111-115. ISSN 2229-8932

Shairi, Noor Azwan and Mohd Sanusi, Nursyahirah and Adib, Othman and Zakaria, Zahriladha and Mohd Ibrahim, Imran (2019) Performance analysis of ultra-wideband RF switch using discrete pin diode in SC-79 package for medical application of microwave imaging. International Journal Of Electrical And Computer Engineering (IJECE), 9 (6). pp. 4668-4674. ISSN 2088-8708

Sheikh, Ahmed Abdalla and Azmi, Mohd Sanusi and Aziz, Maslita and Al-Mhiqani, Mohammed Nasser and Bafjaish, Salem Saleh (2019) Diacritic segmentation technique for arabic handwritten using region-based. Indonesian Journal Of Electrical Engineering And Computer Science, 18 (1). pp. 478-484. ISSN 2502-4752

Sheikh Md Fadzullah, Siti Hajar and Nasaruddin, Muhamad Muaz and Kamalrudin, Massila and Ramli, Mizah and Mohamad, Imran Syakir and Omar, Ghazali and Akop, Mohd Zaid (2019) The Effect Of Aspect Ratio On Multi-Walled Carbon Nanotubes Filled Epoxy Composite As Electrically Conductive Adhesive. Journal of Advanced Manufacturing Technology (JAMT), 13 (1). pp. 133-144. ISSN 1985-3157

Shukor, Ahmad Zaki and Khaw, Huai Jian and Ali @ Ibrahim, Fariz and Mohd Aras, Mohd Shahrieel and Jamaluddin, Muhammad Herman (2019) Human Distance Estimation Using Quadcopter For Surveillance Purpose. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 483-488. ISSN 2278-3075

Shukur, Azurin and Hussein, Nur Izan Syahriah and Kamat, Seri Rahayu and Yuniawan, Dani (2019) The Impact Of Worker Experience And Health Level To Vibration Absorbed By Hand. Journal of Advanced Manufacturing Technology, 13 (1). pp. 91-103. ISSN 1985-3157

Soin, Norhayati and Salim, Sani Irwan and Jaafar, Anuar and Wan Muhamad Hatta, Sharifah (2019) Delay Performance Due To Thermal Variation On Field-Programmable Gate Array Via The Adoption Of A Stable Ring Oscillator. IET Computers and Digital Techniques, 13 (5). pp. 1-9. ISSN 1751-8601

Subramaniam, Siva Kumar and Panessai, Ismail Yusuf and Ramlee, Ridza Azri and R., Sujatha and Nilavalan, Rajagopal (2019) TCP Performance And Throughput Fairness Optimization In A Multi-Hop Pipeline Network. International Journal of Recent Technology and Engineering, 8 (3S2). pp. 499-505. ISSN 2277-3878

Subramonian, Sivarao and Jayahkundy, Raguvaran and Ali, Aidy and Abdullah, Mohamad Faizal and Dhar Malingam, Sivakumar and Md Ali, Mohd Amran and Arep @ Ariff, Hambali and Salleh, Mohd Shukor and Vates, Umesh Kumar (2019) Investigation of tyre pressure drop phenomenon using specially designed real-time data mining and storage system. International Journal of Recent Technology and Engineering, 7 (5S4). pp. 533-537. ISSN 2277-3878

Sukri, Mohamad Firdaus and Rachmad, Imbang Tritjahjono and Kasni, Sumeru and Andriyanto, Setyawan (2019) Evaluation Of Subcooling With Liquid-Suction Heat Exchanger On The Performance Of Air Conditioning System Using R22/R410A/R290/R32 As Refrigerants. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 55 (1). pp. 1-11. ISSN 2289-7879

Sulaima, Mohamad Fani and Dahlan, Nofri Yenita and Mat Yasin, Zuhaila and Mohd Rosli, Marlinda and Omar, Zulkiflee and Hassan, Mohammad Yusri (2019) A review of electricity pricing in peninsular Malaysia: Empirical investigation about the appropriateness of Enhanced Time of Use (ETOU) electricity tarif. Renewable And Sustainable Energy Reviews, 110. pp. 348-367. ISSN 1364-0321

Sumeru, Kasni and Sukri, Mohamad Firdaus and Falahuddin, Muhamad Anda and Setyawan, Andriyanto (2019) A review on sub-cooling in vapor compression refrigeration cycle for energy saving. Jurnal Teknologi, 81 (5). pp. 155-170. ISSN 2180–3722

Syed Ahmad, Sharifah Sakinah and Shaik Osman, Anis Naseerah and Basiron, Halizah (2019) The impact of social media on human interaction in an organisation based on real-time social media data. International Journal of Data Science, 4 (3). pp. 260-271. ISSN 2053-082X

Syed Mohamed, Muhammad Syafiq and Azani, Akmal Hafiz and Abdullah, Lokman and Zamri, Ruzaidi and Maslan, Mohd Nazmin and Mat Ali, Mahasan and Zainon, Maslan and Mohd Samsuddin, Noorazizi (2019) Tool And Task Design Challenges For Left Handers: A Brief Review. Human Factors And Ergonomics Journal (HFEJ), 4 (1). pp. 46-51. ISSN 2590-3750

Syed Mohamed, Muhammad Syafiq and Isa, Halim and Lee, Song Jin and Azani, Akmal Hafiz (2019) Design of noise insulator for metal stamping operation in manufacturing sector. International Journal Of Integrated Engineering, 11 (8). pp. 19-24. ISSN 2229-838X

Syed Salim, Syed Najib and Rahmat, Mohd Fua’ad and Abdullah, Lokman and Shamsudin, Shamsul Anuar and Zainon, Maslan and Muhammad Amin, Ahmad Fairuz (2019) Enhanced Self-Regulation Nonlinear PID For Industrial Pneumatic Actuator. International Journal Of Electrical And Computer Engineering (IJECE), 9 (4). pp. 3015-3024. ISSN 2088-8708

Talib, Irsa and Hussain, Jawad and Sundaraj, Kenneth and Chee, Kiang Lam (2019) A Review On Crosstalk In Myographic Signals. European Journal of Applied Physiology, 119. 9 - 28. ISSN 1439-6319

Talib, Irsa and Sundaraj, Kenneth and Lam, Chee Kiang (2019) Association Of Anthropometric Parameters With Amplitude And Crosstalk Of Mechanomyographic Signals During Forearm Flexion, Pronation And Supination Torque Tasks. Scientific Reports, 9. 0 - 0. ISSN 2045-2322

Talib, Mohammed Saad and Hassan, Aslinda and Abal Abas, Zuraida and Hassan, Ali Abdul Hussian and Ali, Mohanad Faeq and Al-Araji, Zaid Jasim (2019) Clustering Based Affinity Propagation In Vanets : Taxonomy And Opportunity Of Research. International Journal of Recent Technology and Engineering, 7 (6S5). pp. 672-679. ISSN 2277-3878

Tan, Ming Hui and Bani Hashim, Ahmad Yusairi and Salleh, Mohd Rizal (2019) Radio frequency connector insertion loss measured from 300 KHz Until 8.5 GHz by using network analyzer and mechanical calibration kits. Journal Of Engineering Science And Technology, 14 (3). pp. 1587-1600. ISSN 1823-4690

Tan, Ying Ying and Fam, Soo Fen and Kamarudin, Mohd Fauzi and Wahjono, Sentot Imam and Ong, Boon Zian (2019) Measuring Urban Tourist Spillover Effect Toward Rural Area. International Journal of Recent Technology and Engineering, 8 (2S11). pp. 701-705. ISSN 2277-3878

Teddy, Purnamirza and Mohd Ibrahim, Imran and Ralibi, Muhammad and Susanti, Rika and Mudia, Halim and Rahmi, Depriwana and Sutoyo, Sutoyo and Mulyono, Mulyono (2019) A Design Of Radial Line Slot Array Antennas Using The Specification Of Panel Antennas. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 17 (6). pp. 3066-3072. ISSN 1693-6930

Tengku Sharif, Tengku Intan Suzila and Mohamad Noor, Mohd Yusri and Omar, Siti Rohana (2019) Politeness In Online Communication: Retailer-Client Interaction. Humanities & Social Sciences Reviews, 7 (2). pp. 233-239. ISSN 2395-6518

Thamilarasan, Yarshini and Raja Ikram, Raja Rina (2019) Mymuet: A Design Of A Mobile Based Crowdsourced Assessment For Malaysia University English Test With Non-Synchronous Participant Interaction. International Journal of Innovative Technology and Exploring Engineering, 8 (11). pp. 2971-2977. ISSN 2278-3075

Tianfeng, Zhou and Liew, Pay Jun and Fubin, Ma and Benshuai, Ruan and Xibin, Wang and Jia, Zhou (2019) Microlens array fabrication on WC mold using EDM milling with in situ electrode trimming. The International Journal Of Advanced Manufacturing Technology, 103 (5-8). pp. 3003-3011. ISSN 0268-3768

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah (2019) Binary Competitive Swarm Optimizer Approaches For Feature Selection. Computation, 7 (2). 01-17. ISSN 2079-3197

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah (2019) Classification Of Hand Movements Based On Discrete Wavelet Transform And Enhanced Feature Extraction. International Journal Of Advanced Computer Science And Applications (IJASCA), 10 (6). pp. 83-89. ISSN 2158-107X

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah (2019) A Comparative Analysis Of Wavelet Families For The Classification Of Finger Motions. International Journal of Advanced Computer Science and Applications, 10 (4). pp. 221-226. ISSN 2158-107X

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah (2019) Hybrid Binary Particle Swarm Optimization Differential Evolution-Based Feature Selection For EMG Signals Classification. Axioms, 8 (3). pp. 1-17. ISSN 2075-1680

Too, Jing Wei and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah (2019) A New Co-Evolution Binary Particle Swarm Optimization With Multiple Inertia Weight Strategy For Feature Selection. Informatics, 6 (2). 01-14. ISSN 2227-9709

Too, Jing Wei and Tee, Wei Hown and Abdullah, Abdul Rahim and Mohd Saad, Norhashimah (2019) EMG Feature Selection And Classification Using A Pbest-Guide Binary Particle Swarm Optimization. Computation, 7 (1). 02-20. ISSN 2079-3197

Ullah, Inam and Azmi, Mohd Sanusi and Desa, Mohammad Ishak (2019) Junction point detection and identification of broken character in touching Arabic handwritten text using overlapping set theory. International Journal of Advanced Computer Science and Applications, 10 (6). pp. 256-260. ISSN 2158-107X

Ullah, Inam and Azmi, Mohd Sanusi and Desa, Mohammad Ishak and Alomari, Yazan M. (2019) Segmentation of touching Arabic characters in handwritten documents by overlapping set theory and contour tracing. International Journal of Advanced Computer Science and Applications, 10 (5). 155 - 160. ISSN 2158-107X

Upkli, Wenny Rumy and Wan Abdul Razak, Intan Azmira and Azmi, Aimie Nazmin and Ab Rahman, Azhan and Bohari, Zul Hasrizal (2019) Output power forecasting for 2kW monocrystalline PV system using response surface methodology. International Journal of Electrical Engineering and Applied Sciences (IJEEAS), 2 (2). pp. 23-32. ISSN 2600-7495

Utomo, Fandy Setyo and Suryana, Nanna and Azmi, Mohd Sanusi (2019) New Instances Classification Framework On Quran Ontology Applied To Question Answering System. Telkomnika (Telecommunication Computing Electronics and Control), 17 (1). 139 - 146. ISSN 1693-6930

Vijay, S. K. and Hassan, Nornikman and Ahmad, Mohd Riduan and Ahmad, Badrul Hisham and Rawat, Sanyog and Ray, Kanad (2019) Dual Band Printed Bow-Tie Antenna For WLAN/WIMAX Application. Journal of Advanced Manufacturing Technology, 13 (3). pp. 1-12. ISSN 1985-3157

W. Mohamad, W Noor Fatihah and Kasim, Mohd Shahir and Mohd Zakaria, Muhammad Akmal and Mohd Shahrim, Mohammad Shah All Hafiz and Mohamed, Saiful Bahri (2019) The Effects Of Indentation Loading Force And Number Of Indentations On The Micro Hardness Variation For Inconel 718. International Journal of Recent Technology and Engineering, 8 (3). pp. 980-983. ISSN 2277-3878

Wahid, Mohammad Khalid and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Maidin, Nurul Ain and Ab Rahman, Mohd Hidayat and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2019) Development Of Biodegradable Plastics For Packaging Using Wastes From Oil Palm And Sugar Cane. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 75-78. ISSN 2277-3878

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2019) Hybrid Nanofluid Flow And Heat Transfer Over A Nonlinear Permeable Stretching/Shrinking Surface. International Journal of Numerical Methods for Heat and Fluid Flow, 29 (9). pp. 3110-3127. ISSN 0961-5539

Waini, Iskandar and Ishak, Anuar and Pop, Ioan Mihai (2019) Hybrid Nanofluid Flow And Heat Transfer Past A Vertical Thin Needle With Prescribed Surface Heat Flux. International Journal of Numerical Methods for Heat and Fluid Flow, 29 (12). pp. 4875-4894. ISSN 0961-5539

Wang, Pengfei and Li, Shi and Yin, Yu and Lewis, Elfed and Garrell, Gerald and Rosol, Ahmad Haziq Aiman and Abdul Latiff, Anas and Harun, Sulaiman Wadi and Guo, Bingang (2019) All fibre Q-switched Thulium-doped fibre laser incorporating Thulium–Holmium co-doped fibre as a saturable absorber. Optics Communications, 450. pp. 160-165. ISSN 0030-4018

Wei Hown, Tee and Yusoff, Mohd Rahimi and Yaakub, Muhamad Faizal and Abdullah, Abdul Rahim (2019) Voltage Variation Signals Source Identification And Diagnosis Method. International Journal Of Advanced Computer Science And Applications, 10 (4). pp. 170-180. ISSN 2158-107X

Wong, Adam Yoon Khang and Md. Din, Norashidah and Abdullah, Shapina and Elias, Shamsul Jamel and Din, Roshidi and Bakar, Rosmadi (2019) Design of a cell selection mechanism to mitigate interference for cell-edge macro users in femto-macro heterogeneous network. Bulletin Of Electrical Engineering And Informatics, 8 (1). pp. 180-187. ISSN 2089-3191

Wong, Yan Chiew and Alselwi, Mohammed Abdul Raheem Esmail and Mohammed Napiah, Zul Atfyi Fauzan (2019) Integrated CMOS rectifier for RF-powered wireless sensor network nodes. Bulletin Of Electrical Engineering And Informatics, 8 (3). pp. 829-838. ISSN 2089-3191

Wong, Yan Chiew and Asli, Astrie Nurasyeila Fifie (2019) 3.3V DC Output At-16dBm Sensitivity And 77% PCE Rectifier For RF Energy Harvesting. International Journal Of Power Electronics And Drive System (IJPEDS), 10 (3). pp. 1398-1409. ISSN 2088-8694

Wong, Yan Chiew and Mohd Kamel, Mohamad Khairul (2019) Design Consideration In Low Dropout Voltage Regulator For Batteryless Power Management Unit. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1213-1223. ISSN 2089-3191

Wong, Yan Chiew and Yap, Jim Hui (2019) A 30mV Input Battery-Less Power Management System. Bulletin of Electrical Engineering and Informatics, 8 (4). pp. 1169-1179. ISSN 2302-9285

Yaacob, Mohd Rusdy and Buchhave, Preben and Velte, Clara Marika (2019) Statistical Description Of The Turbulent Round Jet Developing Region Along Its Centerline. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (2). pp. 337-353. ISSN 2289-7879

Yaakob, Mohd Yuhazri and Amir Mohamed, Kamarul and Ang, Siew Khim and Lye, Michelle Chuok Fang and Abdullah, Abu and Husin, Mohd Amirhafizan and Sihombing, Haeryip (2019) Effect Of Stitching Patterns On Tensile Strength Of Kenaf Woven Fabric Composites. International Journal of Integrated Engineering, 11 (6). pp. 70-79. ISSN 2229-838X

Yaakob, Mohd Yuhazri and Balkrishnan, Paramananthan and Husin, Mohd Amirhafizan and Sihombing, Haeryip (2019) Coconut Fiber Panel Towards Acoustical Performance. International Journal of Mechanical and Mechatronics Engineering, 19 (2). pp. 11-24. ISSN 2227-2771

Yaakob, Mohd Yuhazri and Husin, Mohd Amirhafizan and Abdullah, Zailinda and H., Sihombing and S.T.W., Lau (2019) Effects Of Different Processes On Mechanical Properties Of CFRP By RTM And VIP Techniques. International Journal of Mechanical & Mechatronics Engineering, 19 (5). pp. 75-80. ISSN 2077-124X

Yaakob, Mohd Yuhazri and Salahudin, Mohamad Tahkim and Sihombing, Haeryip and Wan Yaacob, Wan Nur Hidayah and Amir Mohamed, Kamarul and Sulaiman, Shamsudin (2019) The Profiling of Design Product Using Bezier Curve for Customers Product Design Preferences. International Journal Of Advanced Trends In Computer Science And Engineering, 8 (1.3). pp. 214-218. ISSN 2278-3091

Yaakob, Mohd Yuhazri and Salleh, Mohd Rizal and Wan Nor Azman, Wan Ainul Syafika and Amir Mohamed, Kamarul and Salahudin, Mohamad Tahkim and Haery, Sihombing (2019) Physiognomic Characteristics Towards MPV Car Design In Kansei Engineering. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). pp. 224-229. ISSN 2278-3091

Yahaya, Saifudin Hafiz and Yaakub, Siti Farizah and Salleh, Mohd Shukor and Abd Rashid, Mohd Warikh and Abdullah, Abu and Purnomo, Muhammad Ridwan Andi (2019) Mathematical Modelling Of The Passive And Semi-Active Automobile Suspension Systems In Ford Scorpio Car Model. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 83-96. ISSN 1985-3157

Yasin, M and Md Johari, Md Ashadi and Jali, Mohd Hafiz and Abdul Khudus, Muhammad Imran Mustafa and M.S., Maslinda and Mohamad Ali, Ummu Umairah and Harun, Sulaiman Wadi and Zaidan, A.H. and Apsari, R. (2019) Effect of tapering diameters with microbottle resonator for formaldehyde (CH2O) liquid sensing. Sensing and Bio-Sensing Research, 25. pp. 1-5. ISSN 2214-1804

Yasin, Moh and Harun, Sulaiman Wadi and Ab Rahman, Mohd Fauzi and Mahyuddin, Mohamad Badrol Hisyam and Abdul Latiff, Anas and Paul, Mukul Chandra and Dhar, Anirban and Das, Shyamal K. and Yupapin, Preechap Promphan (2019) Holmium based nanoseconds pulsed fibre laser generation in the 2-micron region. Optik, 195 (163157). pp. 1-7. ISSN 0030-4026

Yasin, Mohamad and Hamid, Sana Sulaiman and Harun, Sulaiman Wadi and Jali, Mohd Hafiz and Mohd Yusof, Haziezol Helmi and Md Johari, Md Ashadi and Abdul Rahim, Hazli Rafis (2019) Microfiber Loop Resonator For Formaldehyde Liquid Sensing. Optik - International Journal for Light and Electron Optics, 196. pp. 1-7. ISSN 0030-4026

Yasin, Mohammad and Mohd Yusof, Haziezol Helmi and Jali, Mohd Hafiz and Md Johari, Md Ashadi and Dimyati, Kaharudin and Harun, Sulaiman Wadi and Khasanah, Miratul (2019) Detection of formaldehyde vapor using glass substrate coated with zinc oxide nanorods. IEEE Photonics Journal, 11 (1). pp. 1-9. ISSN 1943-0655

Ya’acob, Suraya and Mohamad Ali, Nazlena and Mat Nayan, Norshita and Liang, Haining and Ahmad, Ibrahim and Ibrahim, Roslina and Abu Bakar, Nur Azaliah (2019) Visual Analytics Evaluation Process: Practice Guidelines For Complex Domain. Malaysian Journal of Computer Science, 2019 (1). pp. 118-134. ISSN 0127-9084

Yusmady, Mohamed Arifin and Shamsudin, Shamsul Anuar and Mokhtar, Muhammad Zhafri and Syahrial, Fadhli and Akop, Mohd Zaid and Herawan, Safarudin Gazali (2019) The Effect Of Diesel And Bio-Diesel Fuel Deposit Layers On Heat Transfer. Journal of Advanced Manufacturing Technology (JAMT), 13 (2). pp. 1-14. ISSN 1985-3157

Yusof, Robiah and Abdullah, Raihana Syahirah and Adnan, Nurul Syahirrah and Abd. Jalil, Nurlaily (2019) Analysis of Data Mining Tools for Android Malware Detection. Journal Of Advanced Computing Technology And Application (JACTA), 1 (2). pp. 22-26. ISSN 2672-7188

Yusop, Norbayah and Abdullah, Mardina and Ahmad, Mohd Riduan and Mohd Esa, Mona Riza and Mohammad, Sulaiman Ali and Suparta, Wayan and Gulisano, Adriana Maria and Cooray, Vernon (2019) Seasonal analysis of cloud-to-ground lightning flash activity in the Western Antarctica. Atmosphere, 10 (12). pp. 1-17. ISSN 2073-4433

Yusop, Norbayah and Zainudin, Siti Khalijah and Wan Mohd Nor, Wan Nur Arina and Alhasa, Kemal Maulana and Ahmad, Mohd Riduan and Mohammad Sabri, Muhammad Haziq and Abdullah, Mardina and Mohd Esa, Mona Riza and Suparta, Wayan and Gulisano, Adriana Maria and Cooray, Vernon (2019) Cloud-to-ground lightning observations over the Western Antarctic region. Polar Science, 20. pp. 84-91. ISSN 1873-9652

Zabha, Nur Imanina and Ayop, Zakiah and Anawar, Syarulnaziah and Hamid, Erman and Zainal Abidin, Zaheera (2019) Developing Cross-Lingual Sentiment Analysis Of Malay Twitter Data Using Lexicon-Based Approach. International Journal of Advanced Computer Science and Applications, 10 (1). pp. 346-351. ISSN 2158-107X

Zainal Bakri, Siti Farhana and Hariri, Azian and Ismail, Marzuki and Muhamad Damanhuri, Amir Abdullah (2019) Evaluation Of Industrial Workplace Exposure To Metal Fumes Using Toenail As Bio-Indicator. International Journal of Integrated Engineering, 11 (5). pp. 133-139. ISSN 2229-838X

Zainal Abidin, Zaheera and Zakaria, Nurul Azma and Abal Abas, Zuraida and Anuar, Anis Ajmal and Harum, Norharyati and Baharon, Mohd Rizuan and Ayop, Zakiah (2019) Enhanced physical document management using NFC with verification for security and privacy. International Journal of Advanced Computer Science and Applications, 10 (3). pp. 173-178. ISSN 2158-107X

Zakaria, Afiqah Zahirah and Ramli, Sofia Najwa and Wen, Chuah Chai and Mohd Foozy, Cik Feresa and Palaniappan, P. Siva Shamala and Othman, Nur Fadzilah (2019) Enhancing The Randomness Of Symmetric Key Using Genetic Algorithm. International Journal of Innovative Technology and Exploring Engineering, 8 (8S). pp. 327-330. ISSN 2278-3075

Zakaria, Muhammad Zulfattah and Jumaidin, Ridhwan and Norain, Idris and Zulkifli, N.W.M. and Masjuki, H.H. and Harith, M.H. and Syahir, A.Z. and Yusoff, M.N.A.M. and Alwi, Azham and Jamshaid, M. and Arslan, A. (2019) Effect Of Bio-Based Lubricant Towards Emissions And Engine Breakdown Due To Spark Plug Fouling In A Two-Stroke Engine. Journal of Cleaner Production, 221. pp. 215-223. ISSN 0959-6526

Zakaria, Nurul Azma and Zainal Abidin, Zaheera and Saharudin, Muhammad Shamil and Yusof, Robiah (2019) Code Pocket: Development Of Interactive Online Learning Of STEM’s Subject. International Journal Of Recent Technology And Engineering (IJRTE), 8 (2). pp. 5537-5542. ISSN 2277-3878

Zakaria, Zahriladha and Alsariera, Hussein Salameh Mahmoud and Awang Md Isa, Azmi (2019) A Broadband P-Shaped Circularly Polarized Monopole Antenna With A Single Parasitic Strip. IEEE Antennas and Wireless Propagation Letters, 18 (10). pp. 2194-2198. ISSN 1536-1225

Zakaria, Zahriladha and Mabrok, Mussa and Alhegazi, Ammar and Sutikno, Tole (2019) Wideband Power Amplifier Based On Wilkinson Power Divider For S-Band Satellite Communications. Bulletin Of Electrical Engineering And Informatics, 8 (4). pp. 1531-1536. ISSN 2089-3191

Zakaria, Zahriladha and Md Arshad, Mohd Khairuddin and Awang Md Isa, Azmi and Dasril, Yosza and A. Alahnomi, Rammah and Mohd Bahar, Amyrul Azuan (2019) Real time microwave biochemical sensor based on circular SIW approach for aqueous dielectric detection. Scientific Reports, 9 (1). pp. 1-12. ISSN 2045-2322

Zakaria, Zahriladha and Mohd Bahar, Amyrul Azuan and Al-Ahnomi, Rammah Ali Hussien and Sam, Weng Yik and Md Arshad, Mohd Khairuddin and Abu-Khadrah, Ahmed Ismail Mohammad (2019) Microfluidic Biochemical Sensor Based On Circular SIW-DMS Approach For Dielectric Characterization Application. International Journal Of RF And Microwave Computer-Aided Engineering, 29 (9). pp. 1-13. ISSN 1096-4290

Zakaria, Zahriladha and Mohsen, Mowafak Khadom and Dinar, Ahmed Musa and Attiah, Mothana Lafta and Awang Md Isa, Azmi and Abdulhammed, Muhannad Kaml (2019) Hybrid multi-independent mmWave MNOs assessment utilising spectrum sharing paradigm for 5G networks. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (3). pp. 1101-1109. ISSN 1693-6930

Zakaria, Zahriladha and Shairi, Noor Azwan and Edward, Nurhasniza and Shairi, Noor Azwan (2019) A Novel UWB Reconfigurable Filtering Antenna Design With Triple Band-Notched Characteristics By Using U-Shaped Coppers. Indonesian Journal Of Electrical Engineering And Computer Science, 14 (1). pp. 267-275. ISSN 2502-4752 (Submitted)

Zaman, Khalid and Hishan, Sanil S. and Sasmoko, Sasmoko and Khan, Aqeel and Ahmad, Jamilah and Hassan, Zainudin and Qureshi, Muhammad Imran (2019) Access To Clean Technologies, Energy, Finance, And Food: Environmental Sustainability Agenda And Its Implications On Sub-Saharan African Countries. Environmental Science and Pollution Research, 26 (16). 16503 - 16518. ISSN 0944-1344

Zambri, Nor Aira and Salim, Norhafiz and Mohd Noh, Faridah Hanim and Sim, Sy Yi (2019) Performance Comparison Of PEMFC Hydrogen Reformer With Different Controllers. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (5). pp. 2617-2624. ISSN 1693-6930

Zambri, Nor Aira and Salim, Norhafiz and Mohd Nordin, Ili Najaa Aimi and Mohamed, Azah (2019) Modeling Of A Planar Sofc Performance Using Artificial Nueral Network. Indonesian Journal of Electrical Engineering and Computer Science, 15 (3). pp. 1645-1652. ISSN 2502-4752

Zawawi, Tengku Nor Shuhada Tengku and Mohd Saad, Norhashimah and Too Jing, Wei and Shair, Ezreen Farina and Abdullah, Abdul Rahim and Sudirman, Rubita (2019) Classification Of EMG Signal For Health Screening Task For Musculoskeletal Disorder. International Journal Of Engineering & Technology, 8 (1.7). pp. 219-226. ISSN 0975-4024

Zolkifri, Nur Izzati and Gan, Chin Kim and Shamsiri, Meysam (2019) Performance Analysis Of Malaysian Low Voltage Distribution Network Under Different Solar Variability Days. Indonesian Journal of Electrical Engineering and Computer Science, 13 (3). pp. 1152-1160. ISSN 2502-4752

Zuliansyah, Mochammad and Desa, Mohammad Ishak and Ahmad, Sabrina (2019) Selecting general entities for TOGAF’s core content metamodel using best worst method. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 9 (1). pp. 3857-3863. ISSN 2278-3075

Zulkarnain, Nur Zareen (2019) Ultrasound Reports Standardisation Using Rhetorical Structure Theory And Domain Ontology. Journal Of Biomedical Informatics: X, 1. pp. 1-14. ISSN 2590-177X

Zulkarnain, Nur Zareen and Meziane, Farid (2019) A Methodology For Ontology Reuse: The Case Of The Abdominal Ultrasound Ontology. International Journal of Intelligent Information Technologies, 15 (4). pp. 1-21. ISSN 1548-3657

Zwolinski, Mark and Mispan, Mohd Syafiq and Duan, Shengyu and Halak, Basel (2019) A reliable PUF in a dual function SRAM. Integration, 68. pp. 12-21. ISSN 0167-9260

Thesis

A Masius, Alphonsos (2019) Miniaturized On-Board And On-Chip Antenna Design For Integrated RF Energy Harvesting System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ab. Wahab, Nazdiana (2019) Capacity Enhancement Of Cellular Network Using Wifi Offloading. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abd Ghani, Mohamad Hanifah (2019) Investigation Of Cellulose Fiber From Banana Waste By Chemical Treatment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd Razak, Siti Safwana (2019) Development Of Stereo-Matching Algorithm Based On Adaptive Weighted Prediction. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abd. Salam., Nurul Akmal (2019) Development And Analysis Of Near-Infrared Spectroscopy Technique For Non-Invasive Blood Glucose Monitoring System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Hamid, Abdul Hakim (2019) Experimental Investigation On The Influence Of DLC Coating On The Wear Behaviour Of Helical Gear. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Munajat, Nurain (2019) The Development Of Carbon Nanotube/Carbon Nanofibre From Polyacrylonitrile Electrospun Nanofibre Precursor For Electronic Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Mohd Aidil Shah (2019) Characterization and Parametric Evaluation of Wire Electrical Discharge Machining of Cold Work Tool Steels. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdul Rahim, Mohd Isa (2019) Optimization Of Drilling Parameter For Carbon Fiber Reinforced Polymer CFRP Material Using RSM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdulhameed, Muhannad Kaml (2019) Beam Steering Control Of Microstrip Patch Antenna Using Electromagnetic Band Gap. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Abd Halimnizam (2019) Surface Roughness Study On Mild Steel In Conventional Turning Process Under Three Condition Cutting Fluids. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Ahmad Shafawi (2019) Computational Fluid Dynamics Study Of Bio-Mimetic Wind Turbine For Energy Harvesting Using OpenFOAM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Amirah (2019) Stability And Thermal Properties Of Hydroxyl Multiwalled Carbon Nanotubes In Different Medium. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abdullah, Zailinda (2019) Mechanical Behaviour Of Carbon Reinforced Polymer Using RTM And VIP Techniques For Aircraft Spoiler Hinge. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Hamizan (2019) Design Of New Inverted Suspended Circular Polarized Antenna With Metasurface. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Muhammad Faizal (2019) Tribology Characteristics Of 22MNB5 Boron Steel Coated With Titanium Aluminum Nitrade. Masters thesis, Universiti Teknikal Malaysia Melaka.

Abu Bakar, Noor Farah Iddayu (2019) Synthesis Of Hematite/Mwcnts Nanocomposite Through Thermal Oxidation And Spin Coating. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ad Suhadak, Fadrah Hanim (2019) Effect Of Variable Amplitude Loading On Fatigue Characteristic And Failure Probability For Automobile Steering Knuckle. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ademola, Adebayo Babatope (2019) Accelerated Weathering Of Rubberwood Reinforced Recycled Polypropylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Afham Huslan, Muhammad Amir (2019) Modelling Entrepreneurial Opportunity Creation On Green Technology Researchers In Selangor And Melaka, Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Fesol., Siti Feirusz (2019) Development Of Framework To Engage Student's Learning In Technical MOOC Using Wearable Technology. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Ridzuan, Mohamad Nazmi (2019) Empowering Green Trademark For Ecolabel Certification In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ahmad Tarmizi, Yusnida (2019) A Constant Switching Frequency Of Direct Torque Control Of Brushless DC Motor. Masters thesis, Universiti Teknikal Malaysia Melaka.

Aji, Azman Hafiidz (2019) Development Of Smartphone Application To Improve Facility Management System In Johor Bahru Sentral. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Jewari, Maher Abd Ibrahim (2019) Implementation Of SVM For Cascaded H-Bridge Multilevel Inverters Utilizing FPGA. Masters thesis, Universiti Teknikal Malaysia Melaka.

Al-Zaidi., Qusay Kanaan Kadhim (2019) Security Risk Issues And Controls For Cloud Computing In Iraqi Government Organisations. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Albawab,, Tarek Mhd Moataz (2019) Automated Postural Angle Classification Using Microsoft Kinect For Ergonomics Assessment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alhammali, Abdalraouf Abdulsalam Musod (2019) Energy Audit And Improvement In The Human Development And Language Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ali, Saif Mohammed (2019) Critical Factors In Electronic Health Readiness Assessment Framework For Iraq Health Services. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ali Al-Baiti, Mohammed Hasan (2019) Influence Of Machining Parameters On Surface Roughness And Quality Of Hole In Drilling Of CFRP Composites With Ultrasonic Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Alkhanbashi, Maged Abdullah Ahmed (2019) Improvement Of Self Alignment Footing System For Motor-Pump Rotating Shaft. Masters thesis, Universiti Teknikal Malaysia Melaka.

Arif, Afraha Baiti (2019) Electromagnetic Wave Absorption Efficiency Of Green Superhydrophobic Magnetic Nanocomposite Sheet From Durian Shell. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Azani, Noorhaslina (2019) Performance Of EDM Die - Sinking Parameters On Material Characteristics Of LM6 Using Graphite Electrode. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhar, Anis Afuza (2019) Surface Integrity And Tool Wear Of Hardened HTCS-150 Steel (52 HRC) In Milling With Tia1n Coated Carbide. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azhar, Jumardi (2019) Investigation To Reduce Material Reject In Production Line At Besi ACM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Mohd Azreen (2019) Thermal Optimization Of Ice Cream Making Process : Comparison Between R134A And R404A Refrigerants. Masters thesis, Universiti Teknikal Malaysia Melaka.

Azmi, Muhamad Syafwan (2019) Vibration Analysis Of Fused Deposition Modeling Printed Lattice Structures Cellular Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Balakrishnan, Paramananthan (2019) Investigation of natural hybrid sandwich panel and thin skin cover towards acoustical performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Boejang, Hambali (2019) Concurrent Product Development Process, Project, And Performance Of Malaysian Car Manufacturer. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Bong, Cheng Siong (2019) New Hybrid Quick Response Manufacturing Framework To Improve Delivery Performance At Engineer-To-Order Company. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Buyamin, Norsheila (2019) Effect of low temperature on the performance of carbo -based conductive ink for flexible printed circuit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chan, Chun Yuan (2019) Feedforward Compensation And Cascaded Control Scheme For Trajectory Tracking Of Pneumatic Muscle Actuated System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Che Ahmad, Suhairi Rizuan (2019) Modelling And Analysis Of New Double Stator Slotted Rotor Permanent Magnet Machine. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Che Ku Junoh, Sahida (2019) NPID Double Hyperbolic Controller For Improving Tracking Performance Of XY Table Ballscrew Drive System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Che Noordin, Muhammad Redzuan (2019) Effect Of Kirigami Pattern Designs On Ultra-Stretchable Conductive Polymer Mechanical Properties For Thin Film Solar Photovoltaic Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chin, Shu Jia (2019) Defected Waveguide Structure With Circular Monopole Antenna For Ultrawideband Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Chuli, Abd Jumaidi (2019) An Investigation Of Energy Absorption Characteristics Of Honeycomb Structure Under Lateral Loading. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dahlan, Mohd Shazwan (2019) Surface roughness study on aluminium in high speed turning process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Daud, Rafizah (2019) The enhancement of gamification leader board model based on player type to increase learning engagement. Masters thesis, Universiti Teknikal Malaysia Melaka.

Dheyaa, Ghaith Anmar (2019) Improvement of dissolved gas analysis interpretation by combining Duval triangle method with machine learning techniques. Masters thesis, Universiti Teknikal Malaysia Melaka.

Engku Ariff, Engku Amirul Rashidin (2019) Analysis Of Hatchback Car Between Manual And CVT Transmission Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Fam, Tony Chee Hoe (2019) Static Coldcure Vulcanization On Embossed Rubber Cotsheets Using Chambers. Masters thesis, Universiti Teknikal Malaysia Melaka.

Farah,, Nabil Salem Yahya (2019) Self-Tuning Fuzzy Logic Speed Control Of Induction Motor Drives. Masters thesis, Universiti Teknikal Malaysia Melaka.

Geno, Hasnizah (2019) Study And Analysis Of Switched Reluctance Linear Motor For High Performance Characteristics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Goh, Khang Wen (2019) Hybridization Of Deterministic And Metaheuristic Approaches In Global Optimization. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Goh, Siew Yun (2019) Optimised Design Of Thermoelectric Energy Harvesting System For Powering Radio Frequency Switch. Masters thesis, Universiti Teknikal Malaysia Melaka.

Gulam Mahfuze, Nur Adibah (2019) Occupants' Perception Towards Thermal Sensation In Engineering Laboratory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Harun, Nurul Hatiqah (2019) Parameter Optimization Of Fused Deposition Modelling Under Ambient Temperature Control. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Ayat Saleh (2019) Optimal Location And Sizing Of Distrubuted Generator Using PSO And GA Algorithms In Power Systems. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hassan, Najmi Aiman (2019) Physical - mechanical properties of elastomer diluted with B10 and B20 biodiesel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Hussain, Nur Fadzila (2019) Low Velocity Impact Response Of Oil Palm Empty Fruit Bunch Fibre Metal Laminates. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Jamadeel Izwan (2019) Proposal Of Effective Maintenance Plan For Enhancing Overall Equipment Effectiveness At Palm Oil Mill. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Maziah (2019) Friction improvement of palm kernel activated carbon-epoxy by oil and water impregnation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ibrahim, Muhammad Najib (2019) The Effect Of Surface Roughness On Tensile Strength Of Fiberglass Reinforced Polymer Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ilias, Mohammad Nazriq (2019) Study On Ergonomic Of Working Posture And Workstation Design In Meyer Burger Factory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Ishak, Norfatiha (2019) The Preparation And Characterization Of Polyhydroxybutyrate-Co-Valerate Tricalcium Phosphate Scaffolds For Bone Tissue Engineering. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jalaudin, Nur Qalbi (2019) Enhancement Of Medium Access Control Protocol With Various Services Utilizing Capture Effect. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jamil, Muhammad Hasif (2019) Analysis of photovoltaic thermal using f-Chart method for domestic hot water. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jansar, Muhammad Faiz (2019) Utilization Of Industrial Waste Derived Ashes As Filler In Acrylonitrile-Butadiene-Styrene Composite. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jasmee, Solehah (2019) Hydrophobicity Performance Of Polyethylene Terephthalate, Thermoplastic Polyurethane And Aluminium Substrates Using Self-Fabricated Contact Angle Tool. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jiga, Elnie Carina (2019) Measuring Overall Equipment Effectiveness Of Pressure Die Casting Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jimit, Roy Hanson (2019) Fatigue Life Behaviour Of Fiberglass Reinforced Composites Subjected To Constant And Variable Amplitude Loadings. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jonid, Izyan Dayana (2019) Electrical Discharge Machining Of Titanium Alloy (Ti-6al-4v) Using Various Types Of Electrodes. Masters thesis, Universiti Teknikal Malaysia Melaka.

Jumadi, Muhammad Taufiq (2019) Investigation On Physical, Thermal, Mechanical And Morphological Properties Of Kenaf Reinforced Recycled Polypropylene/Polyethylene Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamaludin, Khairun Najmi (2019) Spare Part Management Using Economic Order Quantity Model With Fuzzy-Analytical Hierarchy Process (Fuzzy-AHP) Optimization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Kamarudin, Najwa (2019) Preparation And Characterization Of Silicone Rubber Composites Filled Waste Mineral Fillers For High Voltage Insulation Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Keek,, Joe Siang (2019) Path Tracking Control Of Mecanum−Wheeled Robot With Output−Scheduled Fractional−Order Proportional−Integral Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lee, Soon Fui (2019) 5s Implementation In Warehouse For Manufacture Of Plastic Bottles Factory. Masters thesis, Universiti Teknikal Malaysia Melaka.

Lim, Victor Abraham Su Kang (2019) Design Of A Control System For A Reconfigurable Conveyor System Using PLC. Masters thesis, Universiti Teknikal Malaysia Melaka.

Low, Wei Shang (2019) User Acceptance Of Mobile Augmented Reality For Tourism By Adopting The UTAUT Model. Masters thesis, Universiti Teknikal Malaysia Melaka.

M Saleh, Hisamuddin (2019) New Solution For ICT/ELV Infrastructure Project Reporting Using Datalink Technique System. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Manaf, Norshahidah (2019) Multi Objective Performances Optimization Of Poly-Ether-Ether-Ketone (PEEK) Material By Using Rotary Ultrasonic Assisted Drilling. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mansoor, Mohd Sufriansyah (2019) Effect Of Lathe Machining Parameters On Machining Characteristics Towards Mild Steel (AISI 1020) Using RSM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mansor, Nuratiqa Natrah (2019) Force And Position Based Haptic Bilateral Control System For Single Joint Robotic Arms. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mastuki, Ammar Aizat (2019) Surface roughness analysis on titanium alloy Ti-6AI-4V ELI during turning with uncoated carbide insert. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Daud, Mohd Faiz (2019) Feasibility Study On Supply Chain Management For MRO Industry In Malaysia. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Noor, Noraina Alia (2019) Preparation And Characterisation Of Epoxy/Kenaf/Mwcnts Hybrid Composites. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mat Seman., Norhidayah (2019) Integration Of G-Code With Position Controller Via Interpreter Design Using MATLAB For Milling Machine Application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Nasaruddin, Nurul Hafizah (2019) The Influence Of Internal And External Forces In Adoption Of e-CRM In Melaka And Johor SMEs. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Shariff, Mohd Rezykin (2019) Design Of Mobile Robot In Agriculture, Development And Analysis Of Mobile Robot Body Frame Structure Against Applied Load. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md Zahir, Nur Aizatul 'Ain (2019) Optimization Of Hybrid Carbon And Glass Fiber Reinforced Polymer Using Analytical Hierarchy Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Md. Latiff, Aniza (2019) Moisture, Clay And Additive Effect In Aluminum Strength And Surfaces Roughness Using Sand Casting. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Azlinda (2019) Development And Evaluation Of Customized Pes Planus Orthotic Insole Using Additive Manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Nor Rizan (2019) A Conceptual Framework Of Reconfigurable Conveyor System To Support Changeability In Manufacturing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad, Siti Nurul Hazlina (2019) Process Capabilitiy Of Tin Plating Inspection : A Case Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Azmi, Helmi Affendi (2019) Development Of Simultaneous Twin Cutter For Machining Thin-Wall Component. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Hazawawi, Nur Amalina (2019) Development Of The Readability Index Model For Young Adults With Reading Difficulties In Malay Language. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Ishak, Nurul Naili (2019) Microstructural Characterization And Mechanical Properties Of Al-Si-Cu Alloys Processed By Equal Channel Angular Pressing. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Noor, Mohamad Noor Azran (2019) Tribology And Electrochemical Behavior Of Electroless Quaternary Nickel Alloy Deposition For Cutting Tools. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Norani, Mohamad Nordin (2019) Optimization Of A Natural Aspirated Hydrogen Diesel Engine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohamad Tar, Amira Farhana (2019) Integration Of Analytical Network Process And Theory Of Inventive Problem Solving For Wheelchair Conceptual Design Selection. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad, Muhammad Azrain (2019) Investigation Of OLED Performance In Non-Operated Mode Subjected To High Thermal Stress And Hygrothermal Aging. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammad Sabri, Muhammad Haziq (2019) Initial Electric Field Changes Of Lightning Flashes In Tropical Thunderstorms. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed, Omar Fouad (2019) Efficient Enhanced Routing Protocal And Accurate Tracking Mechanism For Monitoring Environmental Changes Using Multihop Wireless Sensor Networks. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohammed Aldabas, Sari Abdo Ali (2019) Torque Scaling Of Bilateral Control Master-Slave System For External Loads. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohammed Muslem, Mohammed Bakar (2019) Experimental Studies On Effect Of Process Parameters On Tool Wear In Drilling CFRP Composites With Ultrasonic Machine. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fauzi, Norshahira (2019) The Impact Of Bobbin Friction Stir Welding Fixture On The Weld Development. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Fuad, Mohamad Aqil (2019) Aedes Aegypti Larvae Detection System Based On Convolution Neural Network Via Transfer Learning. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Hashim, Nurul Nasreen (2019) Enhancing The Effectiveness Of Quality Control System Using Lean Six Sigma Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Isa, Saifuddin (2019) A Clustering Based Matrix For Selecting Appropriate Quality Tools And Techniques In Industrial Revolution 4.0. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Ishak, Noordiana (2019) Concurrent Engineering Approach In The Development Of Natural Fibre Metal Laminate Product : Case Study On Car Front Hood. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Kamel, Mohamad Khairul (2019) On-Chip Power Management System Based CMOS Reconfigurable Switched Capacitor DC-DC Converter For Battery-Less Iot Soc. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Mohd Zulfadly (2019) Conceptual Retrofit Design Of Sustainable Energy Management System For Office Building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir, Nur Ashikin (2019) Design Improvement Of Permanent Magnet Linear Synchronous Motor For Optimum Thrust Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Nasir., Haslinah (2019) Electrophysiological Degrading Correlates For Driving Attention Loss Threshold Determination. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Rizal, Haziq Rifaie (2019) Thinking Production System To Increase Productivity In Assembly Line. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Saffar, Seha (2019) Design And Simulation Of Automated Material Handling System For Automotive Assembly Process. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shah, Mohd Syahrir (2019) Improvement of an indoor environmental quality (IEQ) in university healthcare building. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Shaharudin, Nabilah (2019) Load Frequency Control Using Augmentation PI-LQR Controller For A Two-Area Hydropower System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sulaiman Shah, Faiznur Izzati (2019) Process-Properties Effect On Copper Alloy After Investment Casting Using ABS Material As Pattern. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Sulaiman Shah, Faiznur Izzati (2019) Process-Properties Effect On Copper Alloy After Investment Casting Using Abs Material As Pattern. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zabawi, Ahmed Yaser (2019) Developing Cost And Risk Assessment Tool For Hybrid Approach In Information Security Risk Analysis. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zafri, Mazatul Nadia (2019) Chemically Modified Graphene Nanoplatelets-Thermoset Adhesive Through Ultrasonication Assisted Mixing For Natural Rubber Aluminium Bonding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zalani, Naziatul Fazilah (2019) Investigation On Mechanical Behaviour Of Light Weight Woven Kenaf Fibre Reinforced Polypropylene-Aluminium Fibre Metal Laminate. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mohd Zamberi, Mahani (2019) Nano Scale Mechanical Properties of Carbon Black Conductive Ink in Improving Efficiency for Electronics. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohd. Wazir, Mohd. Firdaus (2019) Design improvement of a race car chassis for Educational Innovation In Motorsport And Automotive Racing (EIMARace) event. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohmad, Martini (2019) Frictional Characteristics Of Surface Textured Activated Carbon Composite Derived From Palm Kernel. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mohsen, Mowafak Khadom (2019) Beam Steering Technique For Half Width Microstrip Leaky Wave Antenna. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Mousa Algalos, Muthanna Ali (2019) Risk Management Of Yemen’s Beverage Manufacturing Industry Through Hazard Operability Study. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhamad, Faizal (2019) The Effect Of Temperature And Filament Colour In 3D Printer To The Mechanical Strength And Impact Behaviour Of The Product. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad, Masitah (2019) Quasi-Z-Source Inverter With Hybrid Energy Storage For Induction Motor Drive System. Masters thesis, Universiti Teknikal Malaysia Melaka.

Muhammad Said, Nurlaela (2019) Investigation Of Impact Strain Signal Characteristics For Material Behaviour Prediction From Charpy Test. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mustaffa., Siti Hajar Adni (2019) Numerical Investigation Of Flow Characteristics Of An Oscillatory Flow Across A Thermoacoustic Stack. Masters thesis, Universiti Teknikal Malaysia Melaka.

Mutafa, Mastura (2019) Flow Characteristics Of A Two-Dimensional Diffuser Of Catalytic Converters Situated Close To Engines Using Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nahar, Mohd Nazrin (2019) Energy efficiency in heating ventilation air conditioning and refrigeration (HVAC & R) operation through variable frequency drive (VFD) application. Masters thesis, Universiti Teknikal Malaysia Melaka.

Naroh, Azmi (2019) Characteristic on electromagnetic energy harvesting using graphene/silver filled epoxy for PVT thermal hybrid solar collector. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nasaruddin, Muhamad Muaz (2019) Reliability Performance Of Epoxy Based Electrically Conductive Adhesive With Varying Multiwalled Carbon Nanotube. Masters thesis, Universiti Teknikal Malaysia Melaka.

Nazir Ali, Mohamad Rasyidi (2019) Refurbishment Of Plating Machine Unloader 304 Stainless Steel Track By DMAIC Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Neamah, Ali Fahem (2019) An Electronic Health Record Management Model For Healthcare Organizations In Iraq. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Ng,, Xue Yan (2019) Study And Analysis Of Impact-Based Piezoelectric Energy Harvester For Wideband Output. Masters thesis, Universiti Teknikal Malaysia Melaka.

Norashid, Norjannahtul Ainah (2019) Investigation On Tribological Properties Of 3D Printed ABS And Molded ABS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Osman, Edynoor (2019) New Hybrid Kenaf Fibre/Epoxy Reinforced Aluminium Laminate Composite For Structural Application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Othman, Faridatul Sakinah (2019) Examining The Impact Of Transformational And Transactional Leadership Styles On R&D Team Performance In UTeM. Masters thesis, Universiti Teknikal Malaysia Melaka.

Periannan, Dinesh (2019) FR4 Antenna Design For Tropical Hailstorm Detection In Relation To Lightning Occurrence. Masters thesis, Universiti Teknikal Malaysia Melaka.

Quah, Jit Shen (2019) Object Isolation In A Random Environment Using Manipulation Primitives Approach. Masters thesis, Universiti Teknikal Malaysia Melaka.

Raja Seman, Raja Noor Amalina (2019) Preparation Of Graphene/Molybdenum Disulfide Based Electrodes And Its Electrochemical Performance In Supercapacitors. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Rasid, Farah Amirah (2019) Adaptive Trajectory Generation For Vision-Based Robot Using Negotiation Principle For Rehabilitation Applications. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razali, Amirul Herman (2019) Optimization Of Composite Hinges For Aircraft Spoiler Using Finite Element Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Razi, Mashitah (2019) Streamflow Predictive Model Using Reliable Distribution Method To Enhance Small Hydropower System Performance. Masters thesis, Universiti Teknikal Malaysia Melaka.

Roslan, Nur Saidatul Akmal (2019) Electrospun Nylon 6 Nanofibre Water Filtration Media For Wastewater Treatment. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosli, Nur Ameelia (2019) Effect Of Post Processing Parameters Andcompression Behavior On FDM 3D-Printed ABS Lattice-Structures. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rosszainily., Intan Raihan Asni (2019) Effect Of Carbon Black Reinforcement On The Mechanical Properties Malaysia Rubber Compound. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rudzlan Apandi, Noor Shakinah (2019) Vibration Characteristics On Ball Bearing Operated With Hexagonal Boron Nitride Nanoparticles Mixed With Conventional Diesel Engine Oil. Masters thesis, Universiti Teknikal Malaysia Melaka.

Rusli, Nur Syamimi (2019) Study On Processing Parameters For Polypropylene Reinforced With Fiber Glass Composite Prepared Using Injection Molding. Masters thesis, Universiti Teknikal Malaysia Melaka.

Santuso, Kamarulzaman (2019) Design Of Portable Oil Spill Skimmer. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shafiq Aripin, Muhammad Wazir (2019) Effect Of Electroless Plating Layer Thickness On Mechanical Properties Of Rapid Prototyping (3D Printing). Masters thesis, Universiti Teknikal Malaysia Melaka.

Shah Fenner Khan, Nurdiyanah Nasuha (2019) Optimization Of Assembly Line Using Discrete Event Simulation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Shezad, Zaeem (2019) Total Energy Management Of A University Engineering Building Through Audit. Masters thesis, Universiti Teknikal Malaysia Melaka.

Suhaimi, Muhamad Syirazi (2019) Investigation Of Mechanical Properties On Cement Paste Filled With Palm Oil Fuel Ash (POFA). Masters thesis, Universiti Teknikal Malaysia Melaka.

Sulaiman, Muhammad Hidayat (2019) Optimization Of Injection Moulding Parameters Using Moldflow Simulation Software Analyze By Response Surface Method. Masters thesis, Universiti Teknikal Malaysia Melaka.

Susilo, Sidik (2019) On Energy Harvesting Mechanism Utilizing Flexural Vibration Of A Piezoelectric Material. Masters thesis, Universiti Teknikal Malaysia Melaka.

Syed Mohamed, Sharifah Syahira (2019) Measuring Awareness, Readiness And Effectiveness Of Quality Ecosystem At Institut Kemahiran Mara. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tang, Teng Fong (2019) Positioning Control Of Pneumatic Artificial Muscle Systems Using Improved Nominal Characteristic Trajectory Following Control. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Tee, Wei Hown (2019) Voltage Variation Signals Source Identification System By Time-Frequency Analysis Technique. Masters thesis, Universiti Teknikal Malaysia Melaka.

Tee,, Siau Ping (2019) Improved Positioning Control Of A Rotary Switched Reluctance Actuator Using Modified PID Controller. Masters thesis, Universiti Teknikal Malaysia Melaka.

Thiab, Ali Shawket (2019) A framework for assessing perceived trust and security in electronic payments system : a case study of iraq. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

V. Nanjan, Davandran (2019) Implementation of overall equipment effectiveness in surface mounting technology. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Md Hatta, Wan Nur 'Izzati (2019) Development Of Automated Coolant Supply (ACS) System In Improving Cutting Performance For CNC Milling Machining. Masters thesis, Universiti Teknikal Malaysia Melaka.

Wan Mohamad, Wan Mohd Farid (2019) Influence Of Mechanical Process On The Stress Corrosion Cracking Of 316L Stainless Steel For Implant Application. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Yeo,, Chin Kiat (2019) Tubular Linear Switched Reluctance Actuator: Design And Characterization. Masters thesis, Universiti Teknikal Malaysia Melaka.

Yomli, Sofia Mulyani (2019) Optimization Of Welding Parameters On Mechanical Properties Of Aluminium Alloy 7075. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal, Muhammad Syarifuddin (2019) Road Damage Issues - The Effectiveness Of Volunteer Involvement In Assisting The Authorities. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal Abdin, Mohamad Faisal (2019) Design Of Mechanical Device For Stroke Syndrome After Rehabilitation. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainal Abidin, Syazwani (2019) Thermophysical Properties Of CNF-Based Nanocoolant As A Heat Transfer Media. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainol, Syukran (2019) Integrated Analytical Hierarchy Process (AHP) And Design For Manufacture And Assembly (DFMA) In Concept Generation Of Portable Material Pouring Mechanism. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainuddin, Farah Ayiesya (2019) Experimental Study Of Flow Around Airfoil Using Dielectric Barrier Discharge Plasma Actuator. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zainul Hashimi, Faridah (2019) Reducing Void During Transfer Moulding Of Semiconductor Plastic Package Using. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zolkifri, Nur Izzati (2019) Impact Of Integrating Solar PV System To Malaysian LV Network And Mitigation Using Distributed BESS. Masters thesis, Universiti Teknikal Malaysia Melaka.

Zulkifli, Muhammad Winal Zikril (2019) Human-Robot Interaction With Animal Robot PARO For Patients With Depression. Masters thesis, Universiti Teknikal Malaysia Melaka.

Technical Report

Abdollah, Mohd Faizal and S.M.M Yassin, S.M.Warusia Mohamed and Mas’ud, Mohd Zaki and Selamat, Siti Rahayu and Yusof, Robiah and Ahmad, Rabiah and Shahrin @ Sahibuddin, Shahrin (2019) Coordinated Malware Eradication And Remediation Project (CMERP). [Technical Report] (Submitted)

Alwi @ Suhaimi, Saifulza and Salleh, Mohd Rizal and Jaafar, Hazriq Izzuan and Ab Ghani, Mohd Ruddin and Md Fauadi, Muhammad Hafidz Fazli (2019) A Novel Approach Of Groebner Bases Computation For Safety Analysis Of Distributed Discrete Controllers. [Technical Report] (Submitted)

Basri, Yosza and Ab Rashid, Siti Rosmaniza and Zakaria, Zahriladha and Shaaban, Azizah and Abd Rahim, Rosemizi and Husain, Mohd Nor (2019) A Novel Microwave Sensor With High-Q Resonator For High Sensitivity Material Characterization. [Technical Report] (Submitted)

Chong, Shin Horng and Hassan, Mohd Khair and Loh, Ser Lee and Md Nawawi, Mohamad Riduwan and Selamat, Hazlina (2019) A Novel Practical Synchronization Control Approach For A Twin-Axes Table Driven System In Industrial Transportation. [Technical Report] (Submitted)

Dhar Malingam, Sivakumar and Subramonian, Sivarao and Selamat, Mohd Zulkefli and Sheikh Md Fadzullah, Siti Hajar and Ab Ghani, Ahmad Fuad and Zulkafli, Norizzati (2019) Formulation of physio-mechanical properties towards enhancing hybrid banana kenaf reinforced bio-composites. [Technical Report] (Submitted)

Ghazali, Rozaimi and Rahmat, Mohd Fua’ad and Md. Sam, Yahaya and Yusof, Ahmad Anas and Jaafar, Hazriq Izzuan and Hanafi, Dirman (2019) Adaptive Robust Control Strategy With Recursive Priority Based Fitness Particle Swarm Optimization For An Electro Hydraulic Actuator System. [Technical Report] (Submitted)

Hasan, Rafidah and Alkahari, Mohd Rizal and Ismail, Rainah and Said, Radzai and Md Ali, Syaril Azrad and Azmi, Muhamad Syafwan and Rosli, Nur Ameelia (2019) Investigation On Process-Properties Relationship With Load-Bearing Performance Of Lattice-Structured Cellular Material For Lightweight Applications. [Technical Report] (Submitted)

Katijan, Adnan and Parnon, Mohamad Afiq Amiruddin and Nordin, Abd Khahar and Abduk Katif, Mohd Faruq and Zahmani, Qamar Fairuz and Aziz, Azwan (2019) Automatic Packaging Machine And Cooling & Strainer Machine For Production Of Crunchy Nuts. [Technical Report] (Submitted)

Mohamat Gani, Johar Akbar and Md Nawawi, Mohamad Riduwan and Kok, Swee Leong and Nazmin Azmi, Aimie and Zakaria, Mohd Hafiz (2019) I-Sajadah Prayer Rug With Smart Raka’ah Notification Device. [Technical Report] (Unpublished)

Mohamed Aminuddin, Mai Mariam and Mustaffa, Izadora and Brahin, Noor Mohd Ariff (2019) A novel N100 and N170 wave degrading scale by using hybrid fuzzy logic control method for driving alertness measurement. [Technical Report] (Submitted)

Mohd Ab. Halim, Mohd Firdaus and Abdullah, Abdul Rahim and Haji Azlan, Umar Al-Amani and Mohd Aras, Mohd Shahrieel and Mohd Annuar, Khalil Azha and Azahar, Arman Hadi and Attan, Hassan and Harun, Mohamad Haniff and Nawiah, Nedzarul and Md Som, Mohd Khairul Syazuan (2019) The Development Of Fast Charger 48V Lead Acid Battery For Electrical Scooter MAD 1000 & MAD 1300 Model. [Technical Report] (Submitted)

Mohd Sa’at, Fatimah Al-Zahrah and Mat Tokit, Ernie and Mohd Ghazali, Normah and Putra, Azma (2019) Study Of Turbulence Characteristics Of An Oscillatory Flow Conditions In Thermoacoustic Using Experimentally Validated Two-Equations Turbulence Model. [Technical Report] (Submitted)

Omar, Ghazali and Samsudin, Zambri and Nordin, Mohd Nur Azmi and Kamarolzaman, Anita Akmar and Masripan, Nor Azmmi and Salim, Mohd Azli and Mansor, Muhd Ridzuan and Wu, Jonathan Wei Ping (2019) An Investigation Of Superhydrophobic Waterproofing For Electronic Assembly. [Technical Report] (Submitted)

Omar, Rosli and Sulaiman, Marizan and Othman, Abdul Rani and Azri, Maaspaliza (2019) Design And Development Of A SEPIC Converter For PV Application. [Technical Report] (Submitted)

Robani, Anidah and Ahamat, Amiruddin and Syed Hassan, Syed Najmuddin and Kamarudin, Mohd Fauzi and Ahmat, Norun Najjah and Omar, Siti Rohana and Md Saad, Mohd Shamsuri (2019) Developing A Self-Sufficiency Economy Through Islamic Solidarity Economy (ISE) Model For Sustainable Economy And Resilient Local Community Comparative Perspectives Between Malaysia And Indonesia. [Technical Report] (Submitted)

Saat, Shahrizal (2019) Automation System For Honey Production. [Technical Report] (Submitted)

Salim, Mohd Azli and Wasbari, Faizil and Mohd Rosli, Mohd Afzanizam (2019) Tempe Processing Machine. [Technical Report] (Submitted)

Sazali, Nur Syafiatun Safwana (2019) Model For Heutagogy Design Process With Gamification To Enhance Learning Engagement (HEUG-LEN). [Technical Report] (Submitted)

Sheikh Md. Fadzullah, Siti Hajar and Omar, Ghazali and Mustafa, Zaleha and Hasan, Rafidah and Mohd Noh, Mohd Syahrin Amri and Wu, Jonathan and Samsudin, Zambri (2019) Bonding Material Enhancement For Surface Mount Component On Plastic Assembly. [Technical Report] (Submitted)

Wan Abdul Razak, Intan Azmira and Zainal Abidin, Izham and Yap, Keem Siah and Sulaima, Mohamad Fani and Hassan, Elia Erwani and Gan, Chin Kim (2019) A New Optimization Technique Of Support Vector Machine For Electricity Market Price Forecasting. [Technical Report] (Submitted)

Wong, Yan Chiew and Abdul Hamid, Norihan and Salehuddin, Fauziyah and Ahmad Radzi, Syafeeza and Kok, Swee Leong (2019) Novel High Performance Ambient RFF Energy Harvesting System-On-Chip For Emerging Wireless Devices And Mobile Applications. [Technical Report] (Submitted)

Zahmani, Qamar Fairuz and Abdul Latif, Mohd Faruq and Nordin, Abdul Khahar and Katijan, Adnan and Aziz, Azwan and Parnon, Mohamad Afiq Amiruddin and Mokhtar, Siti Nor’ain (2019) Automated Powder Filler Machine. [Technical Report] (Submitted)