Items where Subject is "T Technology > T Technology (General)"

Article

Lim, Z.Y. and Putra, Azma and Mohd Nor, Mohd Jailani and Yaakob, Mohd Yuhazri (2017) Sound Absorption Performance Of Natural Kenaf Fibres. Applied Acoustics, 130. pp. 107-114. ISSN 0003-682X

Mansor, Nur Farraliza and Abal Abas, Zuraida and Abdul Rahman, Ahmad Fadzli Nizam and Shibghatullah, Abdul Samad and Sidek, Safiah (2014) An Optimization Solution Using A Harmony Search Algorithm. International Symposium on Research in Innovation and Sustainability 2014 (ISoRIS ’14), Spcl (-). pp. 1745-1749. ISSN 1013-5316

Mohamad, Noraiham and Zohid, M. A. and Karim, K. I. and Mazliah, M. and Abd Razak, Jeefferie and Lau, K. T. and Munawar, Rose Farahiyan and Ab Maulod, Hairul Effendy (2017) Lightweight And Green Tiles From Recycled Polypropylene Reinforced With Cockle-Shells Powder. Proceedings Of Innovative Research And Industrial Dialogue’16. pp. 41-42. ISSN 1819-6608

-, Ali Ahmad Milad and Muhamad Noh, ZulAzri and Shibghatullah, Abdul Samad and -, Mustafa Almahdi Algaet (2013) Design a Novel Reverse Direction Transmission Using Piggyback and Piggyback With Block ACK to Improving the Performance of MAC Layer Based on Very High Speed Wireless LANs. 2013 IEEE Conference on Information and Communication Technologies (ICT 2013). pp. 1-4. ISSN 978-1-4673-5758-6

-, Mustafa Almahdi Algaet and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and -, Aouache Mustapha and -, Ali Ahmad Milad (2014) A Review on Provisioning Quality of Service of Wireless Telemedicine for E-Health Services. Middle-East Journal of Science Research. pp. 1-23. ISSN 1990-9233

-, Mustafa Almahdi Algaet and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and -, Ali Ahmad Milad (2013) Provisioning Quality of Service of Wireless Telemedicine for E-health Services. Proceedings of 2013 IEEE Conference on Information and Communication Technologies (ICT 2013). pp. 1-4. ISSN 978-1-4673-5758-6

-, Mustafa Almahdi Algaet and Muhamad Noh , Zul Azri and Shibghatullah, Abdul Samad and -, Aouache Mustapha and -, Ali Ahmad Milad (2014) Provisioning Quality of Service of Wireless Telemedicine for E-Health Services: A Review. Wireless Personal Communications An International Journal. pp. 1-34. ISSN 0929-6212

A Masius, Alphonsos and Wong, Yan Chiew and Lau, Kok Tee (2017) Miniature High Gain Slot-Fed Rectangular Dielectric Resonator Antenna For IoT RF Energy Harvesting. AEU - International Journal Of Electronics And Communications, 85. pp. 39-46. ISSN 1434-8411

A Rahman, Muhamad Arfauz and Mohamad, Nor Rizan and Mustafa, Zaleha and Ismail, Syahriza and Abdul Rahman, Azrul Azwan and Abdullah, Shariman and Mohamad, Effendi and Nordin, Mohd Hisham and Salleh, Mohd Rizal (2018) Design Of Compact Pre-Pregger Machine For In House Production Of Pre-Preg Material. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 437-449. ISSN 1985-3157

A Subki, A Shamsul Rahimi and Mohd Tumari, Mohd Zaidi and Abd Rashid, Wan Norhisyam and Jidin, Aiman Zakwan and Muhammad Mustafa, Ahmad Nizamuddin (2019) Hardware Implementation Of Single Phase Three-Level Cascaded H-Bridge Multilevel Inverter Using Sinusoidal Pulse Width Modulation. International Journal Of Power Electronics And Drive System (IJPEDS), 10 (2). pp. 625-635. ISSN 2088-8694

A. Aziz, N. Nadia and Haroon, Hazura and Abdul Razak, Hanim and Mohd Zain, Anis Suhaila and Othman, Syariffah and Salehuddin, Fauziyah (2017) Stress-Optical Effect Analysis On Silicon-On-Insulator Planar Waveguide. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3). pp. 101-104. ISSN 2180-1843

A. Jalil, Intan Ermahani and Shamsuddin, Siti Mariyam and Muda, Azah Kamilah and Azmi, Mohd Sanusi and Ummi Rabaah, Hashim (2018) Predictive Based Hybrid Ranker To Yield Significant Features In Writer Identification. International Journal Of Advances In Soft Computing And Its Applications, 10 (1). pp. 1-23. ISSN 2074-8523

A. Perumal, Puvanasvaran and M. N. H., Ab. Hamid and Yoong, Sai Sieng (2018) Cycle Time Reduction For Coil Setup Process Through Standard Work: Case Study In Ceramic Industry. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 210-220. ISSN 1819-6608

A. Perumal, Puvanasvaran and Safady, Hammam M. H. and Tay, Choo Chuan and Yoong, Sai Sieng (2019) Performance Measure Of Industrial Robotics In Lean Enterprise: A Case Study In Semiconductor Industry. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 12-16. ISSN 2277-3878

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2019) Classification Of Losses In Overall Equipment Effectiveness Calculation. International Journal Of Recent Technology And Engineering (IJRTE), 8 (1S5). pp. 7-11. ISSN 2277-3878

A. Perumal, Puvanasvaran and Yoong, Sai Sieng and Tay, Choo Chuan (2017) Effect Of Hidden Wastes In Overall Equipment Effectiveness Calculation. ARPN Journal Of Engineering And Applied Sciences, 12 (22). pp. 6443-6448. ISSN 1819-6608

A.R.M, Warikh and Mohd Rosli, ZULKIFLI and Gakim, Miron and M.A, ASYADI AZAM (2012) Formation of Cr23C6 during the Sensitization of AISI 304 Stainless Steel and its Effect to Pitting Corrosion. International Journal of Electrochemical Sience. pp. 9465-9477. ISSN 1452-3981

A.Rahman, Hasimah and Majid, Md.Shah and Jordehi, A.Rezaee and Gan, Chin Kim and Hassan, Mohammad Yusri and O.Fadh, Saeed (2015) Operation And Control Strategies Of Integrated Distributed Energy Resources : A Review. Renewable And Sustainable Energy Reviews, 51 (-). pp. 1412-1420. ISSN -

ABDULLAH, LOKMAN and JAMALUDIN, ZAMBERI and RAFAN, NUR AIDAWATY and YAAKOB, MOHD YUHAZRI (2012) Extensive Tracking Performance Analysis of Classical feedback control for XY Stage ballscrew drive system. Applied Mechanics and Materials , 229-231 (2012). pp. 750-755. ISSN 1662-7482

Ab Aziz, Ab Wafi and Rahim, Norain and Amirhussain, Amir Hariz and Norddin, Nur Bahirah (2017) Intelligent Tenaga Nasional Berhad (TNB) Single Phase Power Supply Cut-Off. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-7). pp. 55-58. ISSN 2180-1843

Ab Aziz, Ab Wafi and Rahim, Norain and Mohd Tumari, Mohd Zaidi and Abdul Kadir, Ahmad Muzaffar and Abd Rashid, Wan Norhisyam and Ainol Bakri, Ainol Sheqal (2018) Experimental Study On Efficiency Of DC And AC Power Supply Travel Kit Using Solar Panel. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 105-109. ISSN 2289-8131

Ab Ghani, Ahmad Fuad and Ali, Mohd Basri and Dhar Malingam, Sivakumar and Mahmud, Jamaluddin (2020) Digital Image Correlation (DIC) technique in measuring strain using opensource platform Ncorr. Journal of Advanced Research in Applied Mechanics, 26 (1). pp. 10-21. ISSN 2289-7895

Ab Ghani, Ahmad Fuad and Mahmud , Jamaluddin (2017) Material Characterization Of Hybrid Composite: Experimental Using Strain GAUGE/DIC With Finite Element Modelling Macro/Micro Scalens. Key Engineering Materials, 740 (-). pp. 31-40. ISSN 1662-9795

Ab Ghani, Mohd Ruddin and Affandi, Rosnani and Gan, Chin Kim and Raman, Siti Hajar and Jano, Zanariah (2014) The Inluence Of Concentrator Size, Reflective Material And Solar Irradiance On The Parabolic Dish Heat Transfer. Indian Journal Of Science And Technology (INDJST), 7 (9). pp. 1454-1460. ISSN 0974-6846

Ab Ghani, Mohd Ruddin and Nabil, Farah and Mat Lazi, Jurifa and Mohd Amin, Nur Huda and Othman, Syariffah and Jano, Zanariah (2016) Comparative Study Of Different Multilevel Topologies Of Five Level Inverter Using Spwm. International Journal of Applied Engineering Research, 11 (20). pp. 10139-10145. ISSN 0973-4562

Ab Ghani, Mohd Sabri and Hashim, Nik Mohd Zarifie and Abdullah Zawawi, Noor Liliah Erlina and Darsono, Abd Majid and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Application of digital signal processing in radar : a study. International Journal of Advanced Engineering Research and Technology (IJAERT), 2 (7). pp. 233-236. ISSN 2348 – 8190

Ab Ghani, Sharin and Muhamad, Nor Asiah and Zainuddin, Hidayat and Noorden, Zulkarnain Ahmad and Mohamad, Noraiham (2017) Application Of Response Surface Methodology For Optimizing The Oxidative Stability Of Natural Ester Oil Using Mixed Antioxidants. IEEE Transactions On Dielectrics And Electrical Insulation, 24 (2). 974 - 983. ISSN 1070-9878

Ab Ghani, Sharin and Muhamad, Nor Asiah and Noorden, Zulkarnain Ahmad and Zainuddin, Hidayat and Ahmad, Asimi Ana (2017) Multi-Response Optimization Of The Properties Of Natural Ester Oil With Mixed Antioxidants Using Taguchi-Based Methodology. IEEE Transactions On Dielectrics And Electrical Insulation, 24 (3). 1674 - 1684. ISSN 1070-9878

Ab Ghani, Sharin and Muhamad, Nor Asiah and Noorden, Zulkarnain Ahmad and Zainuddin, Hidayat and Talib, Mohd Aizam (2017) Oxidation Stability Enhancement Of Natural Ester Insulation Oil: Optimizing The Antioxidants Mixtures By Two-Level Factorial Design. ARPN Journal Of Engineering And Applied Sciences, 12 (6). pp. 1694-1700. ISSN 1819-6608

Ab Ghani, Sharin and Noorden, Zulkarnain Ahmad and Muhamad, Nor Asiah and Zainuddin, Hidayat and Abdullah, Muhammad Ilman Hakimi Chua and Sutan Chairul, Imran (2017) Dielectric Strength Improvement Of Natural Ester Insulation Oil Via Mixed Antioxidants: Taguchi Approach. International Journal Of Electrical And Computer Engineering (IJECE), 7 (2). 650 - 658. ISSN 2088-8708

Ab Ghani, Sharin and Zainuddin, Hidayat and Muhamad, Nor Asiah (2015) Performance Of Palm Shell Activated Carbon As An Alternative Adsorbent For Reclamation Of Used Transformer Oil. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 10752-10758. ISSN 1819-6608

Ab Hadi, Nik Azran (2017) Design And Development Of Smart Autonomous Fire Detector Robot. Journal of Engineering and Applied Sciences, 12 (23). pp. 7223-7228. ISSN 1816-949X

Ab Hadi, Nik Azran and Mohd Annuar, Khalil Azha and Saadon, Intan Mastura and Harun, Mohamad Haniff (2015) Design And Construction Of Liquid Level Measurement System. Journal of Advanced Research in Applied Mechanics, 12 (1). pp. 8-15. ISSN 2289-7895

Ab Hadi, Nik Azran and Salleh, Azahari and Hashim, Nik Mohd Zarifie and Mohd Saad, Norhashimah and Ja'afar, Abd Shukur and Nain, A. A. (2015) Digital Signal Processing:Radio Frequency Applications. International Journal For Advance Research In Engineering And Technology, 3 (IX). pp. 17-19. ISSN 2320-6802

Ab Hadi, Nik Azran and A Aziz, Khairul Azha and Hashim, Nik Mohd Zarifie and Omar, Muhammad Shukri and Jaafar, Anuar (2014) Booth’s Algorithm Design Using Field Programmable Gate Array. International Journal For Advance Research In Engineering And Technology, 2. pp. 86-93. ISSN 2320-6802

Ab Hadi, Nik Azran and A. Subki, A. Shamsul Rahimi and Abd Rashid, Wan Norhisyam and Jidin, Aiman Zakwan and Tan, Sze Ying (2018) Development Of Portable Air Conditioning Using Peltier Effect For Small Area Uses. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 10. pp. 99-103. ISSN 2289-8131

Ab Hadi, Nik Azran and Abdullah, Mohd Firdaus and Hashim, Nik Mohd Zarifie and Mohd Saad, Norhashimah and Salleh, Azahari and Ja’afar, A. S. (2015) Sensors Application Of Digital Signal Processing. International Journal For Advance Research In Engineering And Technology, 3. pp. 24-28. ISSN 2320-6802

Ab Hadi, Nik Azran and Kadmin, Ahmad Fauzan and A Aziz, Khairul Azha and Abd Rahman, Mohd Soufhwee and Abd Razak, S. S. and Salehan, M. Z. and Abdul Hadi, N. A. and Hamzah, Rostam Affendi and Abd Rashid, Wan Norhisyam (2018) Performance Analysis Of Neural Network Model For Automated Visual Inspection With Robotic Arm Controller System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 19-22. ISSN 2180-1843

Ab Hadi, Nik Azran and Manimaran, Vasantha Kumaran and Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Mohd Ab Halim, Mohd Firdaus and Mohamad Sapiee, Mohd Razali (2018) Development Of Smart Home System Using Arduino With Mobile Application. Journal In Engineering,Sciences And Technology, 1. pp. 1-10. ISSN 2215-0986

Ab Hadi, Nik Azran and Mohd Annuar, Khalil Azha and Mohammad Azmi, Mohamad Azim and Salleh, Azahari and Mohd Ab Halim, Mohd Firdaus and Abd Rashid, Wan Norhisyam and Mohd Noh, Mohd Syahrin Amri (2018) Investigating The Power Quality Improvement On Laboratories Equipment Base On Voltage And Current Analysis. Journal Of Advanced Research In Dynamical And Control Systems, 10-spe. pp. 1409-1422. ISSN 2180-1843

Ab Hadi, Nik Azran and Mohd Annuar , Khalil Azha and Harun , Mohamad Haniff and Mohd Ab. Halim, Mohd Firdaus and Mirin, Siti Nur Suhaila and Azahar, Arman Hadi (2018) Dynamic Modelling And Analysis Of 3D Overhead Gantry Crane System. International Journal Of Engineering & Technology, 7. pp. 1257-1262. ISSN 09754024,23198613

Ab Rahman, Azhan and Mohd Zambri, Mohd Khairi and Wan Mohd Kamil, Wan Nur Syahirah and Ramli, Mohd Zulkifli and Bohari, Zul Hasrizal (2018) Optimum sizing of GCPV system under tropical condition. Journal Of Fundamental And Applied Sciences, 10 (3S). pp. 1142-1159. ISSN 1112-9867

Ab Rahman, Mohd Hidayat and Maidin, Nurul Ain and Ahmad, Mohd Nazri and Osman, Mohd Hairizal and Wahid, Mohammad Khalid and Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Razali, Muhammad Zayani Afiq (2018) A Prototype Development Of Anti-Hunchback Device. Journal of Mechanical Engineering, SI5(1). pp. 192-209. ISSN 1823-5514

Ab Rashid, Mohd Zamzuri and Mohd Shah, Hairol Nizam and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel and Sayed Nordin, Sayed Kushairi (2014) Sorting And Retrieval Robotic System Controlled Via Programmable Logic Controller For Library Usage. International Journal Of U-And E-Service, Science And Technology, 7 (4). pp. 19-30. ISSN -

Ab Rashid, Mohd Zamzuri and Mohd Yakub, Mohd Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Ali Mat, Mohamed Sukri and Mamat, Normaisharah M. and Mohd Putra, S. M. S. and Roslan, Shairatul Amni Husna and Mohd Shah, Hairol Nizam and Mohd Aras, Mohd Shahrieel (2019) Comprehensive Review On Controller For Leader-Follower Robotic System. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 985-1007. ISSN 0379-5136

Ab Rashid, Mohd Zamzuri and Mohd Yakub, Mohd Fitri and Shaikh Salim, Sheikh Ahmad Zaki and Ali Mat, Mohamed Sukri and Mamat, Normaisharah M. and Mohd Putra, S. M. S. and Roslan, Shairatul Amni Husna and Mohd Shah, Hairol Nizam and Mohd Aras, Mohd Shahrieel and Arshad, Mohd Rizal (2019) Reconfigurable Multi-Legs Robot For Pipe Inspection: Design And Gait Movement. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 1132-1144. ISSN 0379-5136

Ab Rashid, Mohd Zamzuri and Sayed Nordin, Sayed Kushairi (2014) Design And Control Of Aquarium Water Management System Using Programmable Logic Controller (PLC). International Journal of Science and Research (IJSR), 3 (9). pp. 1049-1055. ISSN 2319-7064

Ab Wahab, Norfariza and Abd Rahim, Abdul Fattah and Nordin, Abd Khahar and Bidin, Basri and Ibrahim, Mohd Azimin and Zahari, Madiha and Abd Mutalib, Nurliyana (2018) Development of portable linear positioning table for drilling machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 809-813. ISSN 1819-6608

Ab Wahab, Norfariza and Abdul Rani, Muhammad Haris and Nordin, Abd Khahar and Nordin, Nor Fauzi and Ibrahim, Mohd Azimin and Basar, Mohd Farriz and Boejang, Hambali (2018) Design and development of fixable clamping for milling machine based on machining performance. International Journal Of Applied Engineering Research, 13 (1). pp. 576-581. ISSN 0973-4562

Ab Wahab, Norfariza and Mohd Saleh, Afferry and Nordin, Abd Khahar and Tamin, Nor Fauzi and Ibrahim, Mohd Azimin and Ahmad, Suziana and Abdul Hadi, Dayanasari (2018) Development Of Portable Magnetic Clamping For Lathe Machine. ARPN Journal Of Engineering And Applied Sciences, 13 (3). pp. 902-906. ISSN 1819-6608

Ab Wahab, Norfariza and Mohd Shuhada, Muhammad Khusyairi and Nordin, Abd Khahar and Md Basar, Mohd Farriz and Boejang, Hambali and Mohd Najib, Suhaila and Mohd Nor, Rozilawati (2018) Design And Development Of New Clamping Method For Waterjet Machine (JetCLAMP) Based On Machining Performances. International Journal Of Engineering & Technology (IJET), 18 (01). pp. 1-5. ISSN 2227-2712

Ab. Ghani, Mohd Ruddin and Abdulzahra, Ali Abdulhasan and Tamjis, Mohamad Rom and Mohamed Khairuddin, Mohamed Syafiq Akmal and Liaw, Geok Pheng and Saif T. H. and Alwahib, Ghassan Jawad Kadhim and Ahmed, Dawood Saleem and Zulkefle, Ahmad Aizan (2016) Comparison study of energy efficiency activities programs among the selected region and countries: lessons learned for Malaysia. ARPN Journal of Engineering and Applied Sciences, 11 (6). pp. 3980-3984. ISSN 1819-6608

Abaas, Thamer and Shibghatullah, Abdul Samad and Yusof, R. (2014) Importance and significance of information sharing in terrorism field. Science International. pp. 1719-1725. ISSN 1013-5316

Abaas, Thamer and Shibghatullah, Abdul Samad and Musa Jaber, Mustafa (2014) Use Information Sharing Environment Concept To Design Electronic Intelligence Framework For Support E-Government : Iraq As Case Study. Advances in Computing, 4 (1). pp. 22-24. ISSN 2163-2944

Abal Abas, Zuraida and Mohd Salleh, Siti Khadijah and O’Donoghue, Diarmuid and Shibghatullah, Abd Samad (2018) Varying Variants For AncDE With MDV Between Target And Trial Vector Measurement. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 155-160. ISSN 2180-1843

Abd Aziz, Ellyana Shaira and Kamarudin, Muhammad Nizam and Jali, Mohd Hafiz and Ghazali, Rozaimi (2017) Modeling And Stability Analysis Of Linear Actuated Finger. International Journal Of Control And Automation, 10 (1). pp. 49-62. ISSN 2005-4297

Abd Aziz, Mohamad Zoinol Abidin and Abu Hussin, Farhana and Ahmad, Badrul Hisham and Suaidi, Mohamad Kadim and Md Fauzi, Noor Azamiah (2017) Design And Impedance Modeling Of Complementary Circular Loop FSS At 2.4ghz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1-5). pp. 115-118. ISSN 2180-1843

Abd Aziz, Mohamad Zoinol Abidin and Ahmad Mufit, Nur Alyaa Diyana and Suaidi, Mohamad Kadim and Rahim, M. K. A. (2013) The Effect Of Quarter-Wave Transformer Matching Network To The X-Circular Polarized Antenna. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 5 (1). pp. 9-13. ISSN 2180-1843

Abd Aziz, Mohamad Zoinol Abidin and Daud, Zakiah and Suaidi, Mohamad Kadim and A. Rahim, Mohamad Kamal (2010) Analysis of indoor MIMO channel capacity using spatial diversity technique. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 2 (2). pp. 55-59. ISSN 2180-1843

Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Kadmin, Ahmad Fauzan and Hamzah, Rostam Affendi and Azhar, Muhammad Aidil (2019) Development Of Portable Automatic Number Plate Recognition (ANPR) System On Raspberry Pi. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1805-1813. ISSN 2088-8708

Abd Ghani, Zamre and Kamit, Kamarudin and Zeain, Mohammed Yousif and Zakaria, Zahriladha and Azidin, Farid Arafat and Ab Hadi, Nik Azran and Mohd Isira, Ahmad Sadhiqin and Othman, Hidayatulfathi and Lago, Herwansyah (2019) Development Of A DC To DC Buck Converter For Photovoltaic Application Utilizing Peripheral Interface Controller. ARPN Journal Of Engineering And Applied Sciences, 14 (7). pp. 1317-1324. ISSN 1819-6608

Abd Halim, Wahidah and Abd Rahim, Nasrudin and Azri, Maaspaliza (2014) Selective Harmonic Elimination For A Single-Phase 13-Level TCHB Based Cascaded Multilevel Inverter Using FPGA. Journal of Power Electronics (JPE), 14 (3). pp. 488-498. ISSN 1598-2092

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yusainee, Syed Yahya (2015) Detection of tube defect using the autoregressive algorithm. Steel and Composite Structures, 19. pp. 131-152. ISSN 1598-6233

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusainee (2015) Vibration Impact Acoustic Emission Technique For Identification And Analysis Of Defects In Carbon Steel Tubes: Part A Statistical Analysis. Journal of Mechanical Science and Technology, 29. pp. 1547-1557. ISSN 1976-3824

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusainee (2015) Vibration Impact Acoustic Emission Technique For Identification And Analysis Of Defects In Carbon Steel Tubes: Part B Cluster Analysis. Journal of Mechanical Science and Technology, 29. pp. 1559-1570. ISSN 1976-3824

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yusainee, Syed Yahya (2015) Pattern Recognition Approach Of Stress Wave Propagation In Carbon Steel Tubes For Defect Detection. International Journal of Computer Theory and Engineering, 7. pp. 139-144. ISSN 1793-8201

Abd Halim, Zakiah and Jamaludin, Nordin and Junaidi, Syarif and Syed Yahya, Syed Yusaini (2014) Classification Analysis Of High Frequency Stress Wave For Autonomous Detection Of Defect In Steel Tubes. AUSTRALIAN JOURNAL OF BASIC AND APPLIED SCIENCES, 8. pp. 251-257. ISSN 1991-8178

Abd Halim, Zakiah and Jamaludin, Nordin and Syarif, Junaidi and Syed Yahya, Syed Yusainee (2014) Detection And Analysis Of Defect In Steel Tube Using Vibration Impact Acoustic Emission Method. International Review of Mechanical Engineering (I.RE.M.E.), 8. pp. 277-282. ISSN 1970-8734

Abd Khair, Fazlin and Putra, Azma and Mohd Nor, Mohd Jailani and Mohd Lazim, Nurul Atiqah and Selamat, Mohd Zulkefli (2014) Preliminary Study On Bamboo As Sound Absorber. Applied Mechanics and Materials, 554 (-). pp. 76-80. ISSN 1660-9336

Abd Latif, M.J. and Jin, Z. and Wilcox, R.K. (2012) Biomechanical characterisation of ovine spinal facet joint cartilage. Journal of Biomechanics, 45. pp. 1346-1352. ISSN 0021-9290

Abd Rahim, Toibah and Sato, Masahiro and Yamada, Motohiro and Fukumoto, Masahiro (2016) Cold-Sprayed TiO2 Coatings From Nanostructured Ceramic Agglomerated Powders. Materials And Manufacturing Processes, 31 (11). pp. 1527-1534. ISSN 1042-6914

Abd Rahman, M.N. and Medjahed, Brahim and Orady, Elsayed A. and Muhamad, Martini Ridha and Abdullah, Rohana and Mohamad Jaya, Abdul Syukor (2018) A Review Of Cloud Manufacturing: Issues And Opportunities. Journal of Advanced Manufacturing Technology (JAMT), 12 (1). pp. 61-75. ISSN 1985-3157

Abd Rashid, Kamarul Ariffin and Husain, Mohd Nor and Othman, Abdul Rani and Abd Aziz, Mohamad Zoinol Abidin and Saad, M.M and Senon , M. and Ahmad , M. T. and Hamidon, J. Sam (2014) Design Of Linear Polarization Antenna For Wireless MIMO Application. ARPN Journal Of Engineering And Applied Sciences, 9 (7). pp. 1026-1030. ISSN 1819-6608

Abd Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Abdullah, Jaafar and Mohmad Ameran, Hanis Liyana (2016) Electrical capacitance tomography: A review on portable ECT system and hardware design. Sensor Review, 36 (1). pp. 64-70. ISSN 0260-2288

Abd Razak, Jeefferie and Ahmad, Sahrim and Ratnam, Chantara Thevy and Yaakub, Juliana and Mohd Abid, Mohd Asyadi Azam and Zainal Abidin, Muhammad Zaimi and Abd Manaf, Mohd Edeerozey and Mohamad, Noraiham (2014) Facile Surface Modification Of Graphene Nanoplatelets (GNPS) Using Covalent ATPS-Dehydration (GNPS-ATPS) And Non-Covalent Polyetherimide Adsorption (GNPS-PEI) Method. APPLIED MECHANICS AND MATERIALS, 761 (-). pp. 391-396. ISSN -

Abd Razak, Jeefferie and Haji Ahmad, Sahrim and Ratnam Dr, Chantara Thevy A/P and Mahamood, Mazlin Aida and Lau, Kok Tee and Ab Maulod, Hairul Effendy and Munawar, Rose Farahiyan and Mohamad, Noraiham (2014) Non-Covalent Polymeric Wrapping Of Igepal C0890 Fo Graphene Nanoplatelets (Gnps-C0890) Filled Nr/Epdm Rubber Blend Nanocomposites. Applied Mechanics and Materials, 761. pp. 385-390. ISSN 1660-9336

Abd Razak, Jeefferie and Ahmad, Sahrim and Thevy Ratnam, Chantara and Shueb, Mohammed Iqbal and Mahamood, Mazlin Aida and Yaakub, Juliana and Shamsuri, Siti Rahmah and Mohamad, Noraiham (2014) The Effects Of Covalent Treated Graphene Nanaoplatelets Surface Modification To Cure Characteristic,Mechanical, Physical And Morphological Properties Of NR/EPDM Rubber Blend Nanocomposites. Advances in Environmental Biology, 8. pp. 3289-3298. ISSN 1995-0756

Abd Razak, Jeefferie and Noor, N. A.M. and Ismail, Syahriza and Mohamad, Noraiham and Lau, Kok Tee and Munawar, Rose Farahiyan and Junid, Ramli (2018) Review On Carbon Nanotube Based Polymer Composites And Its Applications. Journal of Advanced Manufacturing Technology, 12 (1(1)). 311 - 326. ISSN 1985-3157

Abd Samad, Md Fahmi and Mohd Nasir, Abdul Rahman (2017) Comparison Of Information Criterion On Identification Of Discrete-Time Dynamic System. Journal of Engineering and Applied Sciences, 12 (1 SI). pp. 5660-5665. ISSN 1816-949X

Abd. Aziz, Mohamad Zoinol Abidin and Ahmad Mufit, Nur Alyaa Diyana and Suaidi, Mohamad Kadim and Rahim, M.K.A (2012) Investigation Of Single Stage Ë/4 Transformer Matching Network To The X-Circular Polarized Antenna. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 4 (1). pp. 45-49. ISSN 2180-1843

Abd. Aziz, Mohamad Zoinol Abidin and Abd Rashid, Kamarul Ariffin and Husain, Mohd Nor and Othman, Abdul Rani and Saad, Muhammad Majdi and Senon, Misida and Ahmad, Mohamad Tarmizy and Hamidon, J. S. (2014) Design Of Linear Polarization Antenna For Wireless Mimo Application. ARPN Journal Of Engineering And Applied Sciences, 9. pp. 1026-1030. ISSN 1819-6608

Abd. Aziz, Mohamad Zoinol Abidin and Anuar, M. R. and Jaafar, Anuar and Hashim, Nik Mohd Zarifie and Salleh, Azahari and Ja'afar, A. S. (2014) Graphical User Interface For Wireless Patient Monitoring System Using Zigbee Communication. ARPN Journal of Engineering and Applied Sciences, 9. pp. 1554-1558. ISSN ISSN 1819-6608

Abd. Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Ahmad, Badrul Hisham and Suaidi, Mohamad Kadim and Othman, Mohd Azlishah (2014) Design Of Dual Band Antenna For WLAN Application. Jurnal Teknologi, 67. pp. 71-77. ISSN E-ISSN2180-3722

Abd. Manap, Abreeza Noorlina and Omar, Nooririnah and Misran, Mohamad Harris and Okabe, T and Ogawa, K (2014) Experimental And SPH Study Of Cold Spray Impact Between Similar And Dissimilar Metals. Institute of Materials, Minerals and Mining, 30 (5). pp. 335-341. ISSN -

Abdal Kadhim, Ali Mohammed and Kok, Swee Leong (2017) Characterization Of Thermoelectric For Energy Harvesting On Low-Level Heat Sources. Proceedings Of Mechanical Engineering Research Day 2017. pp. 164-165. ISSN -

Abdal Kadhim, Ali Mohammed and Kok, Swee Leong (2017) Piezoelectric Pre-Stressed Bending Mechanism For Impact-Driven Energy Harvester. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-10. ISSN 1757-8981

Abdelrafe, E. and Hussin, B. (2013) Managing Software Project Risks (Implementation Phase) With Proposed Regression Analysis Techniques. International Journal On Information Technology (I.R.E.I.T) , Vol.1 (5). pp. 278-312. ISSN 2281-2911 (Submitted)

Abdelrafe, Elzamly and Burairah, Hussin (2015) Classification and identification of risk management techniques for mitigating risks with factor analysis technique in software risk management. Review Of Computer Engineering Research, 2 (1). pp. 22-38. ISSN 2412-4281

Abdelrafe, Elzamly and Burairah, Hussin (2015) Modelling and evaluating software project risks with quantitative analysis techniques in planning software development. Journal of Computing and Information Technology, 23 (2). pp. 123-139. ISSN 1330-1136

Abdelrafe, Elzamly and Burairah, Hussin and Norhaziah, Md Salleh and Abdul Samad, Shibghatullah (2016) Managing and controlling design process issues by using stepwise approach modelling. Research Journal Of Applied Sciences, Engineering And Technology, 13 (2). pp. 85-97. ISSN 2040-7459

Abdollah, M. F. and Rafrastara, Fauzi Adi (2011) Advanced Virus Monitoring and Analysis System. (IJCSIS) International Journal of Computer Science and Information Security, Vol 9, No.1. ISSN 1947-5500

Abdollah, Mohd Fadzli and Mahmud, Dayang Nor Fatin and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2019) Influence Of Contact Pressure And Sliding Speed Dependence On The Tribological Characteristics Of An Activated Carbon Epoxy Composite Derived From Palm Kernel Under Dry Sliding Conditions. Friction, 7 (3). pp. 227-236. ISSN 2223-7690

Abdul Hamid, Rahimah and Ito, Teruaki (2016) 3D Prosthodontics Wire Bending Mechanism With A Linear Segmentation Algorithm. Journal of Advanced Manufacturing Technology (JAMT) . PP 33- 45. ISSN 1985-3157

Abdul Kadir, Aida Fazliana and Khatib, Tamer and Loo, Soon Lii and Hassan, Elia Erwani (2019) Optimal Placement And Sizing Of Photovoltaic Based Distributed Generation Considering Costs Of Operation Planning Of Monocrystalline And Thin-Film Technologies. Journal Of Solar Energy Engineering, Transactions Of The ASME, 141 (1). pp. 1-8. ISSN 0199-6231

Abdul Kadir, Aida Fazliana and Khatib, Tamer and Wilfried, Elmenreich (2014) Integrating Photovoltaic Systems In Power System : Power Quality Impacts And Optimal Planning Challenges. International Journal of Photoenergy, 2014 (-). pp. 1-7. ISSN -

Abdul Kadir, Aida Fazliana and Mohamed, Azah and Shareef, Hussain and Ibrahim, Ahmad Asrul (2014) An Improved Gravitational Search Algorithm For Optimal Placement And Sizing Of Renewable Distributed Generation Units In A Distribution System For Power Quality Enhancement. Journal Of Renewable And Sustainable Energy, 6 (-). pp. 1-17. ISSN 1941-7012

Abdul Kadir, Faizul Akmar and Hudha, Khisbullah and Sabino, Ubaidillah (2011) Modelling,Characterisation And Force Tracking Control Of A Magnetorheological Damper Under Harmonic Excitation. International Journal Of Modelling, Identification And Control (Ijmic), 13 (1-2). pp. 9-21. ISSN 1746-6172

Abdul Kadir, Faizul Akmar and Tamaldin, Noreffendy and Ayob, Md Razali and Abdullah, Mohd Azman and Hudha, Khisbullah and Mat Yamin, Ahmad Kamal (2014) Vehicle Speed Control Using Gain Scheduling PID With Experimental Throttle-In-The-Loop. International Review on Modelling & Simulations, 7 (4). pp. 682-693. ISSN 1974-9821

Abdul Kadir, Faizul Akmar and Hudha, Khisbullah and Mohammad Nasir, Mohd Zakaria (2012) Vehicle Speed Control Using Gain Scheduling PID Controller. Applied Mechanics And Materials, 165. pp. 170-174. ISSN 1662-7482

Abdul Kadir, Faizul Akmar and Mohammad Nasir, Mohd Zakaria and Hudha , Khisbullah and Amir, Mohd Zubir (2012) Modelling,Simulation And Validation Of 9 DOF Vehicles Model For Automatic Steering System. Applied Mechanics And Materials, 165. pp. 192-196. ISSN 1662-7482

Abdul Karim, Kasrul and Othman, Md Nazri and Wan Hassan, Wan Ahmas Redhauddin and Bugis, Mohd Ismadi and Ramli, Mohd Zulkifli and Abdullah, Abdul Rahim and Jidin , Auzani (2014) Electric Vehicle Development And Prediction Of Battery Consumption Based On A Journey Profile. Applied Mechanics and Materials, 699. pp. 794-799. ISSN 1660-9336

Abdul Latiff, Anas and Kadir, N.A and Ismail, E.I. and Shamsuddin, H. and Ahmad, H. and Harun, S.W. (2017) All-Fiber Dual-Wavelength Q-Switched And Mode-Locked EDFL By SMF-THDF-SMF Structure As A Saturable Absorber. Optics Communications, 389 (-). pp. 29-34. ISSN -

Abdul Latiff, Anas and M. Rusdi, M. F. and Hisyam, M. B. and Ahmad, H. and Harun, S. W. (2017) A Generation Of 2 Um Q-Switched Thulium-Doped Fibre Laser Based On Anatase Titanium (IV) Oxide Film Saturable Absorber. Journal Of Modern Optics, 64 (2). pp. 187-189. ISSN 0950-0340

Abdul Latiff, Anas and Al-Masoodi, Ahmed Hasan Hamood and Ahmed, Mahmoud Hazzaa M. and Arof, Hamzah and Harun, Sulaiman Wadi (2018) Nickel Oxide Nanoparticles Thin Film Saturable Absorber For 1-Micron Pulsed All-Fibre Lasers Operation. Journal Of Modern Optics, 65. pp. 1801-1808. ISSN 0950-0340

Abdul Majid, Izaidin and Cooper, Sarah and Levie, Jonathan and Ismail, Kamariah (2007) Entrepreneurial management and technology-based firm performance. Advance Manufacturing Technology Journal , 1 (2). pp. 79-98. ISSN 1985-3157

Abdul Majid, Izaidin and Ismail, Kamariah and Cooper, Sarah (2011) Prevalence of entrepreneurial management practices in technology-based firms in Malaysia. African Journal of Business Management, 5 (6). pp. 2075-2082. ISSN 1993-8233

Abdul Manap, Redzuan and Ling, Shao and Frangi, Alejandro Federico (2017) PATCH-IQ: A Patch Based Learning Framework For Blind Image Quality Assessment. Information Sciences, 420. pp. 329-344. ISSN 0020-0255

Abdul Munir, Fudhail and Mikami, Masato and Hassan, Muhammad Zahir and Salim, Mohd Azli (2017) Flame Stabilization In Multiple Inlet Channel Meso-Scale Tube Combustors With Wire Mesh. Journal Of Advanced Vehicle System, 4 (1). pp. 20-27. ISSN 2550-2212

Abdul Munir, Fudhail and Mohd Tahir, Musthafah and Mohd Shafie, Abdul Muhaimin and Hassan, Muhammad Zahir (2017) Development Of Numerical Model For Simulation Intake Flow In Combustion Chamber Of L-Head Engine Type. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 134-142. ISSN 2227-2771

Abdul Munir, Fudhail and Seo, Takehiko and Mikami, Masato (2017) Optimization Of Flame Stabilization Limits In Meso-Scale Tube Combustors With Wire Mesh. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17. pp. 186-192. ISSN 2227-2771

Abdul Munir, Fudhail and Sukri, Muhammad Izzat Syazwan and Syahrial, Fadhli and Roseli, Adnan and Dhar Malingam, Sivakumar and Hassan, Muhammad Zahir (2017) Design of engine mounting for single seated educational racing vehicle. ARPN Journal of Engineering and Applied Sciences, 12 (24). pp. 7348-7351. ISSN 1819-6608

Abdul Munir, Fudhail and Zainol, Sabri Adlan and Abdul Munir, Fudhail and Mahlia, Teuku Meurah Indra and Masjuki, Hassan (2018) Effects Of Equivalence Ratio On Performance And Emissions Of Diesel Engine With Hydrogen And Water Injection System At Variable Injection Timing. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18 (6). pp. 106-111. ISSN 2227-2771

Abdul Mutalip, Zaiton and J., Faezah and Rihawi, Zeina S. (2018) Orientation Effects For LOS And NLOS OWC Characterisation Within Small Structures. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 119-123. ISSN 2180-1843

Abdul Rahim , Nur Hidayu and Baharudin, Zikri Abadi and Othman, Md Nazri and Ab Rahman, Puteri Nur Suhaila (2014) The comparative study between twisted and non-twisted distribution line for photovoltaic system subjected to induced voltage generated by impulse voltage. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (8). pp. 5774-5778. ISSN 1693-6930

Abdul Rahim , Nur Hidayu and Baharudin, Zikri Abadi and Othman, Md Nazri and Zakaria, Zahriladha and Ahmad Khiar, Mohd Shahril and Saharuddin, Nur Zawani and Ahmad, Azlinda (2014) Investigation Of Wave Propagation To PV-Solar Panel Due To Lightning Induced Overvoltage. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (1). pp. 47-52. ISSN 1693-6930

Abdul Rahman, Azrul Azwan and Mohamad, Nor Rizan (2016) Software-In-The-Loop Technique: An Approach To Support Reconfiguration Of Manufacturing System. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9789-9795. ISSN 1819-6608

Abdul Rahman, Farah Khalidah and Md Saat, Mohd Shakir and Yusop, Yusmarnita and Husin, Siti Huzaimah (2017) Simulation-Based Study Of Capacitance Values Affected By Various Dielectric Materials And Distances For Low Power Wireless Power Transfer System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 61-65. ISSN 2180-1843

Abdul Rahman, Farah Khalidah and Md Saat, Mohd Shakir and Yusop, Yusmarnita and Husin, Siti Huzaimah and Yahya, Aziz (2017) Design And Analysis Of Capacitive Power Transfer System With And Without The Impedance Matching Circuit. International Journal Of Power Electronics And Drive System (IJPEDS), 8 (3). pp. 1260-1273. ISSN 2088-8694

Abdul Rashid, Nurulizwa and Jabar, Juhaini and Yahya, Salleh and Samer, Sayed (2015) State Of The Art Of Sustainable Development : An Empirical Evidence From Firm's Resource And Capabilities Of Malaysian Automotive Industry. Procedia Social And Behavioral Sciences, 195 (-). pp. 463-470. ISSN -

Abdul Rashid, Nurulizwa and Shamee, Samer Ali and Jabar, Juhaini (2014) Eco Innovation Effort : A Review Of Dynamic Eco Innovation Practices And New Research Agenda Towards Sustainability Development. International Journal of Innovation and Applied Studies (IJIAS) , 8 (3). pp. 1112-1119. ISSN 2028-9324

Abdul Shukor, Fairul Azhar and Misron, Norhisam and Wakiwaka, Hiroyuki and Tashiro, Kunihisa and Nirei, Masami (2013) Performance Analysis Of 6 Slot 8 Pole Permanent Magnet Linear Motor. Journal of Engineering and Technology, 4 (2). pp. 23-37. ISSN 2180-3811

Abdul Shukor, Fairul Azhar and Wakiwaka, Hiroyuki and Nirei, Masami (2015) Design And Performance Index Comparison Of The Permanent Magnet Linear Motor. Progress In Electromagnetics Research M, 43 (-). pp. 101-108. ISSN 1937-8726

Abdul Wahab, Fauzi and Tan, Kien Leong and Zulkifli, Hasnani and Ibrahim, Mohamad Izuan and Talib, Muhamad Akmal and Zamri, Nur Ain and Mahmoud Khatab, Omar Khatab Ibrahim (2016) Multiple Transmitters & Receivers For Free Space Optical Communication Link Performance Analysis. Journal Of Telecommunication Electronic And Computer Engineering, 8 (5). pp. 29-32. ISSN 2180 – 1843

Abdulameer, Ashwaq and Sulaiman , Marizan and Mohd Aras, Mohd Shahrieel and Saleem, Dawood (2016) Gui Based Control System Analysis Using Pid Controller For Education. Indonesian Journal Of Electrical Engineering And Computer Science, 3 (1). pp. 91-101. ISSN 2502-4752

Abdulhammed, Muhannad Kamil and Mohamad Isa, Mohd Sa'ari and Zakaria, Zahriladha and Mohd Ibrahim, Imran and Mohsen, Mowafak Khadom (2019) Radiation Pattern Control Of Microstrip Antenna In Elevation And Azimuth Planes Using EBG And Pin Diode. International Journal Of Electrical And Computer Engineering (IJECE), 9 (1). pp. 332-340. ISSN 2088-8708

Abdullah, Abdul Rahim and Kasim, Rizanaliah and Selamat, Nur Asmiza and Ramli, Mohd Zulkifli (2015) Nickel-Metal Hydride Battery Analysis Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 10 (15). pp. 6448-6452. ISSN 1819-6608

Abdullah, Abdul Rahim and Hussin, Adibah Syahirah and Wei Hown, Tee and Mohd Saad, Norhashimah and Jopri, Mohd Hatta and Sutikno, T (2018) Harmonic Load Diagnostic Techniques And Methodologies:A Review. Indonesian Journal Of Electrical Engineering And Computer Science, 9. pp. 690-695. ISSN 2502-4752

Abdullah, Abdul Rahim and Mohd Noor, Nor Shahirah and Mohamad Basir, Muhammad Sufyan Safwan and Abdul Rahman, Nor Nabilah Syazana and Mohd Saad, Norhashimah and Hassan, Mai R.M. (2018) Automated Real-Time Vision Quality Inspection Monitoring System. Indonesian Journal Of Electrical Engineering And Computer Science, 11. pp. 775-783. ISSN 2502-4752

Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Noreffendy and Mohd Rosli, Mohd Afzanizam and Sachit, Fadhil Abdulameer (2019) Technology Progress On Photovoltaic Thermal (PVT) Systems With Flat-Plate Water Collector Designs: A Review. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 59 (1). pp. 107-141. ISSN 2289-7879

Abdullah, Ilyana and Wan Mahmood, Wan Hasrulnizzam and Md Fauadi, Muhammad Hafidz Fazli and Ab Rahman, Mohd Nizam and Ahmad Jali, Fathiyah (2015) Sustainabilty In Malaysian Palm Oil A Review On Manufacturing Perspective. Polish Journal of Environmental Studies, 24 (4). pp. 1463-1475. ISSN 1230-1485

Abdullah, Mohd Azman and Salim, Mohd Azli and Putra, Azma (2014) Linear And Angular Displacement Relationship Of Natural Rubber Engine Isolator. Applied Mechanics and Materials, 575 (-). pp. 250-253. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Analysis Of The Chassis And Components Of All Terrain Vehicle (ATV). Applied Mechanics and Materials, 660. pp. 753-757. ISSN 1660-9336

Abdullah, Mohd Azman and Tamaldin, Noreffendy and Ramli, Faiz Redza and Sudin, Mohd Nizam and Mohamed Muslim, Abdul Mu'in (2014) Design And Development Of Low Cost All Terrain Vehicle (ATV). Applied Mechanics and Materials, 663 (-). pp. 517-521. ISSN 1660-9336

Abdullah, Muhammad Ilman Hakimi Chua and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Tamaldin, Noreffendy and Mat Nuri, Nur Rashid (2016) The Potential Of hBN Nanoparticles As Friction Modifier And Antiwear Additive In Engine Oil. Mechanics & Industry, 17 (1). pp. 1-6. ISSN 2257-7777

Abdullah, N and Kasrul, Abdul Karim and Mohd Luqman, Mohd Jamil and Md Nazri, Othman (2014) Design Of Switched Reluctance Motor Using Empirical Method. INTERNATIONAL JOURNAL OF ENERGY AND POWER ENGINEERING RESEARCH, 2. pp. 6-10. ISSN 2289-5620

Abdullah, Norida and Hussin, Noraini and Shonubi, Olurotimi Adebayo and Ghazali, Siti Raudzah and Abu Talib, Mansor (2018) Career Decision-Making Competency,Self-Knowledge,And Occupational Explorations:A Model For University Students. Journal Of Technical Education And Training (JTET), 10 (1). pp. 71-81. ISSN 2229-8932

Abdullah, Nurfaezah and Abdul Karim, Kasrul and Raja Othman, Raja Nor Firdaus Kashfi and Mohd Jamil, Mohd Luqman and Othman, Md Nazri (2014) Design Of Switched Reluctance Motor Using Finite Element Method. Science International-Lahore, 26. pp. 1635-1638. ISSN 1013-5316

Abdullah, Raihana Syahirah and Abdollah, Mohd Faizal and Muhamad Noh, Zul Azri (2014) Enhanced P2P Botnets Detection Framework Architecture with Hybrid Analysis Approach. Journal of Information Assurance and Security, 9 (2). pp. 62-71. ISSN 1554-1010

Abdullah, Raihana Syahirah and Abdollah, Mohd Faizal and Muhamad Noh, Zul Azri and Mas'ud, Mohd Zaki and Selamat, Siti Rahayu and Yusof, Robiah (2013) Revealing The Criterion On Botnets Detection Technique. International Journal of Computer Science Issues , 10 (2). pp. 208-215. ISSN 1694-0814

Abdullah, Raihana Syahirah and Abu, Nor Azman and Abdollah, Mohd Faizal and Muhamad Noh, Zul Azri (2014) Understanding The Threats Of Botnets Detection : A Wide Survey. Research Journal of Information Technology, 6 (3). pp. 135-153. ISSN 1815-7432

Abdullah, Rohana and Abd Rahman, Md Nizam and Salleh, Mohd Rizal (2019) A Systematic Approach To Model Human System In Cellular Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 13 (1). pp. 1-11. ISSN 1881-3054

Abdullah, Rohana and Hashim, Hanizam and Abd Rahman, Md Nizam and Salleh, Mohd Rizal (2018) Development Of Enterprise Human System Modelling Framework In Support Of Cellular Manufacturing Lean Operation. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 235-245. ISSN 1985-3157

Abdullah, S.F and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Mohd Saad, Wira Hidayat (2016) Fingerprint Gender Classification Using Univariate Decision Tree (J48). International Journal Of Advanced Computer Science And Applications (IJASCA), 7 (9). pp. 217-221. ISSN -

Abdullah, Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Mahadhir, Majidah and Abal Abas, Zuraida (2016) Fingerprint Based Gender Classification Using Discrete Wavelet Transform And K-Nearest Neighbor. International Journal of Computer Science and Information Security (IJCSIS), 14 (8). pp. 340-344. ISSN 1947-5500

Abdullah, Zulkeflee and Janin @ Abd. Karim, Nurul Fadzlina and Md Ali, Mohd Amran and Shamsudin, Shamsul Anuar and Kasim, Mohd Shahir and Samat, Khairul Fadzli (2015) Design And Development Of Weaving Aid Tool For Rattan Handicraft. Applied Mechanics and Materials, 761 (-). pp. 277-281. ISSN 1660-9336

Abdullah , Siti Fairuz and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Mohd Saad, Wira Hidayat (2016) Support Vector Machine, Multilayer Perceptron Neural Network, Bayes Net And K-Nearest Neighbor In Classifying Gender Using Fingerprint Features. International Journal of Computer Science and Information Security (IJCSIS), 14 (7). pp. 336-340. ISSN 1947-5500

Abdullah Mohammed Saghir, Zobilah and Zahriladha, Zakaria and Noor Azwan, Shairi (2016) Selectable Multiband Isolation Of Single Pole Double Throw Switch Using Transmission Line Stub Resonator For Wimax And Lte Applications. IET Microwaves, Antennas & Propagation. pp. 1-19. ISSN 1751-8725

Abu, Nor Hashidah and Mohamad Jaya, Abdul Syukor and Muhamad, Mohd Razali (2017) Modeling Sustainable Manufacturing Practices Towards Economy Sustainability Performance. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4214-4218. ISSN 1819-6608

Abu Bakar, Hamzah and Abd Aziz, Mohamad Zoinol Abidin and Ahmad, Badrul Hisham and Ghani, Suhana and Hassan, Nornikman (2017) Broadband Right-Handed Circular Polarized (RHCP) Antenna With Loop Metasurfaces. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 123-126. ISSN 2180-1843

Abu Bakar, Mohd Hadzley and Ahmad, Siti Sarah Nadia and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Mohamad Raffi, Nurul Fatin (2014) Evaluation Of The Surface Integrity When Machining LM6 Aluminum Metal Matrix Composites Using Coated And Uncoated Carbide Cutting Tools. Applied Mechanics and Materials, 465-16 (-). pp. 1049-1053. ISSN 1660-9336

Abu Bakar, Mohd Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Nor Fauzi and Azlan, Umar Al-Amani and Adam, Abdul Aziz and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir (2018) Fabrication And Machining Performance Of Powder Compacted Alumina Based Cutting Tool. MATEC Web Of Conferences, 150. pp. 1-5. ISSN 2261-236X

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri and Ahmad, Siti Sarah Nadia and Mohamad Raffi, Nurul Fatin (2014) Surface Integrity Of LM6 Aluminum Metal Matrix Composite When Machined With High Speed Steel And Uncoated Carbide Cutting Tools. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 854-862. ISSN 2289-4659

Abu Bakar, Mohd Hadzley and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran and Yusoff, Wan Azahar and Wijeyesekera, Devapriya and Hasanah, Tuan Noor (2014) Surface Observation Of Hollow Tube Mat After Sintering And Cutting Process. International Symposium on Research in Innovation and Sustainability 2014, 26 (5). pp. 1895-1898. ISSN 1013-5316

Abu Hassan, Ahmad Taqiyuddin and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Ani, Mohd Hanafi and Hamid, Malek (2017) Motorcyclists’ Head Check Behavior During Merging In Traffic: Effect Of Different Ranges Of Merging Lane Length. Human Factors And Ergonomics Journal, 2 (3). pp. 39-45. ISSN 2590-3750

Abu Hussin, Farhana and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Sadick Ali, Nur Shaheera Alia (2017) Design And Impedance Modeling For Rectangular Slot Frequency Selective Surface (FSS) On Glass. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-8). pp. 31-35. ISSN 2180-1843

Abu Samah, Khyrina Airin Fariza and Hussin, Burairah and Hasan Basari, Abd Samad (2014) A Robust System Integration for Autonomous Evacuation Navigation. 13th International Conference on Intelligent Software Methodologies, Tools, and Techniques (SOMET_14), 265. pp. 692-702. ISSN 978-1-61499-433-6

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2017) Fatigue Damage Simulation Of Automobile Steering Knuckle Subjected To Variable Amplitude Loading. International Journal Of Techology And Engineering Studies, 3 (6). pp. 245-252. ISSN 2415-0924

Ad Suhadak, Fadrah Hanim and Zakaria, Kamarul Ariffin and Ali, Mohd Basri and Yusuff, Mohd Asri (2018) Stress analysis of automobile steering knuckle using finite element method. International Journal Of Engineering & Technology, 7 (317). pp. 28-30. ISSN 2227-524X

Adibah Haneem, Mohamad Dom and Mohd Rosli, Zulkifli (2013) Development of hydroxyapatite layer on superplastic Ti-6Al-4V for biomaterials applications. Advanced Materials Research. pp. 339-343. ISSN 1022-6680

Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Liaw, Geok Pheng (2015) The Impact Of The Solar Irradiation, Collector And The Receiver To The Receiver Losses In Parabolic Dish System. Procedia - Social and Behavioral Sciences, 195 (-). pp. 2382-2390. ISSN 1877-0428

Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2013) A Review Of Concentrating Solar Power (Csp) In Malaysia Environment. International Journal of Engineering and Advanced Technology (IJEAT), 3 (2). pp. 378-382. ISSN 2249 – 8958

Ahmad, Asmala and Mohamad Hashim, Ummi Kalsom and Abd Wahid, R. and Sakidin, Hamzah and Sufahani, Suliadi Firdaus and Mat Amin, Abd Rahman and Abdullah, Mohd Mawardy and Quegan, Shaun (2019) Implementation Of Land Cover Change Detection Based On Supervised Classifications Of Multispectral Satellite Data For Leveraging Internet Of Things. ARPN Journal Of Engineering And Applied Sciences, 14 (10). pp. 1863-1870. ISSN 1819-6608

Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Mohamad Isa, Mohd Sa'ari and Md Hashim, Noorazuan and Rosul, Mochamad and Muhamad, Sulong and Man, Shamsuddin (2014) Temporal changes in urban green space based on normalized difference vegetation index. Applied Mathematical Sciences, 8 (55). 2743-2751 . ISSN 1312-885X

Ahmad, Asmala and Kasmin, Fauziah and Syed Ahmad, Sharifah Sakinah and Abu Sari, Mohd Yazid and Mustapha, Muhammad Amin and Othman, Zuraini (2018) Comparison Between Edge Detection Methods On UTeM Unmanned Arial Vehicles Images. MATEC Web Of Conferences, 150. pp. 1-6. ISSN 2261-236X (In Press)

Ahmad, Asmala and Pramudya Ananta, Gede and Yusof, Norzihani and Ruslan, Siti Nur Azreen and Mohd Noor, Helmi Adly and Razali, Sharifah Nadiyah (2018) Using Experimental Design In Assistive Learning Technology Trials: An Experience-Based Review. MATEC Web of Conferences, 150. pp. 1-6. ISSN 2261-236X

Ahmad, Azman and Othman, Abdul Rani and Zakaria, Zahriladha and Pongot, Kamil (2016) A Diplexed Bandpass Filter For Dual Band RF Front-End Receiver At 2.4 Ghz And 5.75 Ghz. International Journal of Engineering and Technology (IJET), 8 (3). 1571 -1578. ISSN 0975-4024

Ahmad, Fauzi and Hudha, Khisbullah and Mazlan, Saiful Amri and Jamaluddin, Hishamuddin and Zamzuri, Hairi and Abd Kadir, Zulkiffli and Aparow, Vimal Rau (2017) Modelling And Control Of A Fixed Calliper-Based Electronic Wedge Brake. Strojniški Vestnik - Journal Of Mechanical Engineering, 63. pp. 181-190. ISSN 0039-2480

Ahmad, Nadiah and Halim, Isa and Radin Umar, Radin Zaid and Jamli, Mohamad Ridzuan and Syed Mohamed, Muhammad Syafiq and Albawab, Tarek Mhd Moataz and Abdullah, Muhammad Haziq Lim and Padmanathan, Vinothini (2018) Usability Study Of Integrated Rula-Kinect System For Work Posture Assessment. International Journal Of Integrated Engineering, 10. pp. 175-184. ISSN 2229-838X

Ahmad, Noor Azman Bin and Tahir, Md.Nor Hayati (2017) Procurement Flexibility Of The Dimension Of Information Technology Systems For Furniture Industry In Malaysia. International Journal Of Emerging Research In Management &Technology, 6 (6). pp. 174-183. ISSN 2278-9359

Ahmad, Suraya (2017) The Challenges Of Lean Implementation: A Multiple Case Study In Malaysian Aerospace Companies. Journal Of Asian Vocational Education And Training, 10. pp. 103-120. ISSN 2005-0550

Ahmad , M. T. and Abdul Latiff, Anas and Zakaria, Zahriladha and Harun, S. W. (2014) Q-Switched Ultrafast TDLF Using MWCNTS-SA At 2 Micrometre Region. International Journal of Computer and Communication Engineering, 3 (6). pp. 446-449. ISSN 2010-3743

Ahmad Fairuz, Muhammad Amin and Ahmad Idil, Abdul Rahman and S. N. S., Salim and Ishak, Aris and Muhammad Syukri, Suliaman and R. T., Mohamad and Ahmad Aizan, Zulkefle (2015) Cost Effective Remote Monitoring For Mini Hybrid Automation System. International Journal Of Applied Engineering Research, 10 (23). pp. 43663-43668. ISSN 0973-4562

Ahmad Fateh, Mohamad Nor and Marizan, Sulaiman (2016) Voltage Stability Assessment Of Power System Network Using QV And PV Modal Analysis. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 7-11. ISSN 2180-1843

Ahmad Milad, Ali and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Sahib, Shahrin and Ahmad, Rabiah and Algaet, Mustafa Almahdi (2013) Transmission Control Protocol Performance Comparison Using Piggyback Scheme In WLANS. Journal of Computer Science. pp. 1-5. ISSN 1549-3636

Ahmad Milad, Ali and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Mustapha, Aouache and Algaet, Mustafa Almahdi (2014) Reverse direction transmission using single data frame and multi data frames to improve the performance of mac layer based on IEEE 802.11N. Science International-Lahore. pp. 1861-1864. ISSN 1013-5316

Ahmad Muhammad, Aziz and Mohd Zaidi, Omar and Zainuddin, Sajuri and Mohd Shukor, Salleh (2016) Microstructural Changes Of Aluminium Alloy A319 On Cooling Slope Plate. Jurnal Teknologi, 78 (6-9). pp. 121-127. ISSN 0127-9696

Ahmad Muhammad, Aziz and Mohd Zaidi, Omar and Zainuddin, Sajuri and Mohd Shukor, Salleh (2016) Microstructural Morphology Of Rheocast A319 Aluminium Alloy. Advances In Mechanical Engineering, 8 (5). pp. 1-10. ISSN 1687-8132

Ahmad Radzi, Syafeeza and Faiz, K. and Khalid, Syazana Itqan and Wong, Yan Chiew and Mohd Noh, Zarina and Mat Ibrahim, Masrullizam and Mahmod, Noor Mazlina (2017) Design Of Finger-Vein Capture Device With Quality Assessment Using Arduino Microcontroller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1). pp. 55-60. ISSN 2180-1843

Ahmad Radzi, Syafeeza and Hani, Mohamed Khalil and Hindustan, Imran and Mat Ibrahim, Masrullizam and Wong, Yan Chiew (2015) Generalizing Convolutional Neural Networks For Pattern Recognition Tasks. ARPN Journal Of Engineering And Applied Sciences, 10 (12). pp. 5298-5308. ISSN 1819-6608

Ahmad Radzi, Syafeeza and Ngan, Albert Ban Chew and Mohd Sadari, Muhammad Muhaimin Hilmi and Kamaruddin, Mohamad Nasriq and Wong, Jia Li and Md Zauber, Zarini (2017) Electronic Online Handwriting Character Recognition System Using Arduino Platform. Jurnal Teknologi, 79 (7). pp. 51-59. ISSN 0127-9696

Ahmad Radzi, Syafeeza and Piramli, Muhamad Marzuki and Wong, Yan Chiew and Abdul Hamid, Norihan and Ali, Nur Alisa and Mat Ibrahim, Masrullizam (2019) A Design Of License Plate Recognition System Using Convolutional Neural Network. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 2196-2204. ISSN 2088-8708

Ahmad Rahman, Ahmad Hanif and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Ani, Mohd Hanafi and Hamid, Malek (2017) Evaluation Of Motorcyclists’ Hazard Anticipation Behavior At Unsignalized Roundbaouts: On-Campus Vs. Off-Campus. Human Factors And Ergonomics Journal, 2 (3). pp. 46-51. ISSN 2590-3750

Ahmad Yusuf, Ismail and M. J., Chen and M. F., Azizi and M. A., Sis (2016) Experimental Investigation On The Use Of Natural Waste Fibres As Acoustic Material Of Noise Silencer. Journal Of Advanced Research In Materials Science, 22 (1). pp. 1-10. ISSN 2289-7992

Ahmad Yusuf, Ismail and Norshadatulakmar, Mat Shadid and Aliah Mastura, Mohd Nizam (2016) Development Of Green Curtain Noise Barrier Using Natural Waste Fibres. Journal Of Advanced Research In Materials Science, 17 (1). pp. 1-9. ISSN 2289-7992

Ahmad Zaki, Shukor and Jun Wei, Lee and Muhammad Herman , Jamaluddin (2016) Investigation On Force Scaling For Multi Degree Of Freedom Bilateral Teleoperation Control System. International Journal of Mechanical and Mechatronics Engineering, 16 (6). pp. 1-11. ISSN 2077-124X

Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin and Muhammad Fahmi, Miskon and Fariz, Ali @ Ibrahim and Muhammad Qamarul Arifin, Redzuan (2016) An Analysis Of Sensor Placement For Vehicle's Blind Spot Detection And Warning System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 101-106. ISSN 2180-1843

Ahmed, Abu-Khadrah and Zakaria, Zahriladha and Othman, Mohd Azlishah (2014) New Technique To Enhance Quality Of Service Support For Real Time Applications In EDCA Protocol. International Review on Computers and Software (IRECOS) , 9 (3). pp. 1-3. ISSN 1828-6003

Ahmed Al-Kaiali, Suhaib Salam Mohammed and Omar, Rosli and Sulaiman, Marizan and Al-Hiealy, Mohammed Rasheed Jubair (2018) Aggregated Modelling Analysis Of Power Flow From Wind Power Plant Into Grid System Using MATLAB/ SIMULINK Software. ARPN Journal Of Engineering And Applied Sciences, 13 (4). pp. 1163-1172. ISSN 1819-6608

Ahya Ilmudin, Mohamad Hakim and Hashim, Nik Mohd Zarifie and Ja'afar, Abd Shukur and Salleh, Azahari and Jaafar, Anuar and Mohd Sam, Mohd Fazli (2014) Traffic Light Control System Using 434 Mhz Radio Frequency. International Journal of Research in Advent Technology, 2 (8). pp. 26-31. ISSN 2321-9637

Aiman Zakwan, Jidin and Norfadzlia, Mohd Yusof and Tole, Sutikno (2016) Arduino Based Paperless Queue Management System. TELKOMNIKA (Telecommunication Computing Electronics And Control), 14 (3). pp. 839-845. ISSN 1693-6930

Aiman Zakwan , Jidin (2016) Wireless Voice-Based Wheelchair Controller System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 117-122. ISSN 2180-1843

Al Bowarab, Mustafa Hasan and Zakaria, Nurul Azma and Zainal Abidin, Zaheera (2019) Load Balancing Algorithms In Software Defined Network. International Journal Of Recent Technology And Engineering (IJRTE), 7 (6S5). pp. 686-692. ISSN 2277-3878

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Ab Rashid, Siti Rosmaniza and Mohd Bahar, Amyrul Azuan (2017) High-Q Sensor Based On Symmetrical Split Ring Resonator With Spurlines For Solids Material Detection. IEEE Sensors Journal, 17 (9). pp. 2766-2775. ISSN 1530-437X

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Ab Rashid, Siti Rosmaniza and Mohd Bahar, Amyrul Azuan and Shaaban, Azizah (2017) Microwave Bio-Sensor Based On Symmetrical Split Ring Resonator With Spurline Filters For Therapeutic Goods Detection. PLOS ONE, 12 (9). pp. 1-22. ISSN 1932-6203

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan (2016) A novel symmetrical split ring resonator based on microstrip for microwave sensors. Measurement Science Review, 16 (1). pp. 21-27. ISSN 1335-8871

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan (2016) A novel symmetrical split ring resonator based on microstrip for microwave sensors. Measurement Science Review, 16 (1). 21 - 27. ISSN 1335-8871

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan and Ab Rashid, Siti Rosmaniza (2016) A high sensitive microwave sensor based on symmetrical split ring resonator for material characterization. Microwave And Optical Technology Letters, 58 (9). 2106 - 2110. ISSN 1098-2760

Al-Ahnomi, Rammah Ali Hussien and Zakaria, Zahriladha and Ruslan, Eliyana and Mohd Bahar, Amyrul Azuan and Shairi, Noor Azwan (2016) A Novel Microwave Sensor With High-Q Symmetrical Split Ring Resonator For Material Properties Measurement. Jurnal Teknologi , 78 (10-3). 37 - 42. ISSN 2180-3722

Al-Amani, Umar (2011) Effect of Heat Treatment on the Grain Orientation of Bi3.25Nd0.75Ti3O12 Ceramics. Malaysian Journal of Microscopy. pp. 132-136. ISSN 1823 7010

Al-Amani, Umar (2012) High Gain and High Directive of Antenna Arrays Utilizing Dielectric Layer on Bismuth Titanate Ceramics. International Journal of Antennas and Propagation. pp. 1-8. ISSN 10.1155/2012/375751

Al-Amani, Umar (2011) INVESTIGATION OF THE CHARACTERISTICS OF BARIUM STRONTIUM TITANATE (BST) DIELECTRIC RESONATOR CERAMIC LOADED ON ARRAY ANTENNAS. Progress In Electromagnetics Research, 121. 181-213 . ISSN 1070-4698

Al-Amani, Umar (2012) Integration of Miniaturized Array Antenna With High-Permittivity Rectangular Bismuth Titanate for WiMAX Applications. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION. pp. 6032-6036. ISSN 0018-926X

Al-Amani, Umar (2012) Soft Combustion Technique: Solution Combustion Synthesis and Low-Temperature Combustion Synthesis; to Prepare Bi4Ti3O12 Powders and Bulk Ceramics. Science of Sintering, 44. pp. 211-221. ISSN 519.718:661.887

Al-Amani, Umar and Srimala , Sreekantan and Ahmad Fauzi , Mohd Noor and Khairunisak, Abd Razak (2013) Single step combustion synthesis for the preparation of bismuth titanate ceramics for potential applications. Advanced Materials Research, 620 (doi:10). pp. 429-434. ISSN 10.4028/www.scientific.net/AMR.620.429

Al-Amani, Umar and Srimala , Sreekantan and Ahmad Fauzi , Mohd Noor and Khairunisak , Abd Razak and Satoshi , Tanaka and Keizo , Uematsu (2012) Structural and electrical properties of lanthanide substituted-bismuth titanate prepared by low-temperature combustion synthesis. Structural and Electrical Properties of Lanthanide substituted-Bismuth Titanate Prepared by Low-Temperature Combustion Synthesis, 545. pp. 279-284. ISSN 10.4028/www.scientific.net/AMR.545

Al-Amani, Umar (2010) Low-temperature combustion synthesis of Bi4Ti3O12 plate-like structure and some of its characteristics. Malaysian Journal of Microscopy. pp. 69-74. ISSN 1823 7010

Al-Heety, Othman S. and Ismail, Mahamod and Zakaria, Zahriladha and Altahrawi, Mohammed A. (2018) Performance Evaluation Of Peak-To-Average-Power Ratio Reduction Techniques In OFDM. International Journal Of Engineering Research And Technology, 11 (4). pp. 575-593. ISSN 0974-3154

Al-Hegazi, Ammar Abdullah Hussein and Zakaria, Zahriladha and Shairi, Noor Azwan and Salleh, Azahari (2016) Review Of Recent Developments In Filtering-Antennas. International Journal on Communications Antenna and Propagation (IRECAP), 6 (3). 125 - 131. ISSN 2039 – 5086

Al-Hiealy, Mohammed Rasheed Jubair and Omar, Rosli and Sulaiman, Marizan and Abd Halim, Wahidah (2019) Particle Swarm Optimization (PMO) Algorithm With Reduced Number Of Switches In Multilevel Inverter (MLI). Indonesian Journal Of Electrical Engineering And Computer Science, 14 (3). pp. 1114-1124. ISSN 2502-4752

Al-Masoodi, Ahmed Hasan Hamood and Ahmed, Mahmoud Hazzaa M. and Abdul Latiff, Anas and Azzuhri, S.R. (2017) Passively Mode-Locked Ytterbium-Doped Fiber Laser Operation With Few Layer MoS2-PVA Saturable Absorber. Optik, 145. pp. 543-548. ISSN 0030-4026

Al-Masoodi, Ahmed Hasan Hamood and Yasin, Moh and Ahmed, Mahmoud Hazzaa M. and Abdul Latiff, Anas and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Mode-Locked Ytterbium-Doped Fiber Laser Using Mechanically Exfoliated Black Phosphorus As Saturable Absorber. Optik, 147. pp. 52-58. ISSN 0030-4026

Al_Barazanchi, Israa and Shibghatullah, Abdul Samad and Selamat, Siti Rahayu (2017) A New Routing Protocols For Reducing Path Loss In Wireless Body Area Network (WBAN. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1-2). pp. 93-97. ISSN 2180-1843

Algaet, Mustafa Almahdi and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Ahmad Milad, Ali (2013) A Review on Framework and Quality of Service Based Web Services Discovery. European Journal of Scientific Research. pp. 1-23. ISSN 1450-216X/ 1450-202X

Alhawari, Khaled Salem and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor and Abdulrazaq, Mohammed Naser (2017) Effect Of Thixoforming On The Wear Properties Of Al-Si-Cu Aluminum Alloy. Jurnal Teknologi , 79 (5-2). pp. 83-87. ISSN 0127-9696

Alhawari, Khalid Salim and Omar, Mohd Zaidi and Ghazali, Mariyam Jameelah and Salleh, Mohd Shukor (2016) Dry Sliding Wear Behaviour Of Thixoformed Hypoeutectic AL–SI–CU Alloy With Different Amounts Of Magnesium. Journal Composite Interfaces, 23 (6). pp. 519-531. ISSN 0927-6440

Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances in Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Ali, Aidy and Subramonian, Sivarao and Amran, Mohammad and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Effect of fiber loading on the mechanical properties of bagasse fiber–reinforced polypropylene composites. Advances In Mechanical Engineering, 8 (8). pp. 1-5. ISSN 1687-8132

Ali, Aidy and Subramonian, Sivarao and Md Ali, Mohd Amran and Dhar Malingam, Sivakumar and Salleh, Mohd Shukor and Raja Abdullah, Raja Izamshah (2016) Performance evaluation of reworked weld joints. International Journal of Engineering and Technologies, 9. pp. 5-12. ISSN 2297-623X

Ali, Mohd Basri and Abdullah, Shahrum and Nuawi, Mohd Zaki and M. Nopiah, Z. (2014) Evaluating Instrumented Charpy Impact Strain Signals Using Curve Fitting Equations. Journal Central South University, 21 (2). pp. 600-609. ISSN 2227-5223

Ali, Mohd Basri and Sugumar, Dharmalingam and Shafie, Azhar and Mohd Daud, Mohd Ahadlin and Zakaria, Kamarul Ariffin and Abd Latif, Mohd Juzaila (2018) Implementation Of Automation Process In Generating Cad Model For Rim Wheel. ARPN Journal Of Engineering And Applied Sciences, 13 (2). pp. 594-598. ISSN 1819-6608

Ali @ Ibrahim, Fariz and Jamaluddin, Muhammad Herman and Abas, Norafizah and Miskon, Muhammad Fahmi and Shukor, Ahmad Zaki and Norizan, Muhammad Alif and Juhari, Mohamad Fakri (2015) Design And Construction Of RH2000 Cybernatics Hand. Jurnal Teknologi, 77 (20). pp. 121-125. ISSN 0127-9696

Ali Mokhtar, Mohd Najib and Wong, Kian Loon and Saleman, Abdul Rafeq and Bani Hashim, Ahmad Yusairi and Jafar, Fairul Azni and Zakaria, Muhammad Zulfattah (2014) Synthesis of four bar slider mechanism for finitely three separated positions. Advanced Materials Research, 903 (-). pp. 221-226. ISSN 1662-8985

Alias, Shazwani and Abal Abas, Zuraida and Shibghatullah, Abdul Samad and Abdul Rahman, Ahmad Fadzli Nizam (2014) A brief review of surface meshing in medical images for biomedical computing and visualization. Science International-Lahore. pp. 1741-1744. ISSN 1013-5316

Alias , Khamis and Mohd Ruddin, Ab Ghani and Gan, Chin Kim and Muhammad Nizam , Kamarudin (2016) Voltage And Frequency Control Of Microgrid System With Demand Response. International Journal of Simulation Systems Science & Technology, 17 (41). pp. 1-6. ISSN 1473-8031

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Consolidation Characteristics Of Ferrous-Based Metal Powder In Additive Manufacturing. Journal Of Advanced Mechanical Design, Systems, And Manufacturing, 8 (1). pp. 1-16. ISSN 1881-3054

Alkahari, Mohd Rizal and Furumoto, Tatsuaki and Ueda, Takashi and Hosokawa, Akira (2014) Melt Pool And Single Track Formation In Selective Laser Sintering Selective Laser Melting. Advanced Materials Research, 933 (-). pp. 196-201. ISSN 1662-8985

Alkahari, Mohd Rizal and Mazlan, Siti Nur Humaira and Ramli, Faiz Redza and Maidin, Nurul Ain and Sudin, Mohd Nizam and Zolkaply, Ardzatul Ruziah (2018) Surface Finish And Mechanical Properties Of Fdm Part After Blow Cold Vapor Treatment. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48. pp. 148-155. ISSN 2289-7879

Alkahari, Mohd Rizal and Ramli, Faiz Redza and Faudzie, M. S. M and Nazan, Muhammad Afdhal and Sudin, Mohd Nizam and Mat, Shafizal and Khalil, Siti Nurhaida (2018) Dimensional Accuracy And Surface Roughness Of Part Features Manufactured By Open Source 3D Printer. ARPN Journal Of Engineering And Applied Sciences, 13. p. 1139. ISSN 1819-6608

Alsultani, Hamid Sadeq Mahdi and Kadhim Al-Zaidi, Qusay Kanaan and Taha Ahmed, Shaymaa and Khadhim, Ban Jawad (2018) The Use Of Spatial Relationships And Object Identification In Image Understanding. International Journal Of Civil Engineering And Technology (IJCIET), 9 (5). pp. 487-496. ISSN 0976-6308

Amaluddin, Zainuddin and Syafeeza, Ahmad Radzi and Mazree, Ibrahim and Norihan, Abdul Hamid (2016) A Development of Electrical Vehicle Charging System Using Wireless Power Transfer. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6328-6333. ISSN 1819-6608

Aminuddin, M.M.M (2014) The correlation salinity and electric voltage. International Symposium on Tecnology Management And Imerging Technology. pp. 458-461. ISSN 978-1-4799-3704

Aminuddin, Nur Shazwani and Mat Ibrahim, Masrullizam and Mohd Ali, Nursabillilah and Ahmad Radzi, Syafeeza and Darsono, Abd Majid and Wong, Yan Chiew (2017) Road triangle detection for non-road area elimination using lane detection and image multiplication. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (2-8). pp. 73-77. ISSN 2180-1843

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2017) Application Of Taguchi Method In Optimization Of Design Parameter For Turbocharger Vaned Diffuser. Industrial Lubrication And Tribology, 69 (3). pp. 409-413. ISSN 0036-8792

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Abu Mansor, Mohd Radzi and Mamat, Rizalman and Alias, Azri (2018) Investigation Of The Pressure Ratio And Efficiency Of A Turbocharger Centrifugal Compressor With A Vaned Diffuser. World Review Of Science, Technology And Sustainable Development, 14 (2-3). pp. 228-240. ISSN 1741-2242

Amiruddin, Hilmi and Wan Mahmood, Wan Mohd Faizal and Abdullah, Shahrir and Mansor, Mohd Radzi and Abdollah, Mohd Fadzli (2017) Experimental Investigation Of Performance And Emissions Of A Stratified Charge CNG Direct Injection Engine With Turbocharger. MATEC Web Of Conferences, 124 (07004). pp. 1-5. ISSN 2261-236X

Ammar, Naji and Sulaiman , Marizan and Mohamad Nor, Ahmad Fateh (2017) Analysis Load Forecasting Of Power System Using Fuzzy Logic And Artificial Neural Network. Journal Of Telecommunication Electronic And Computer Engineering, 9 (3). pp. 181-192. ISSN 2180 – 1843

Ang, Teoh Ong and Mustapha, Aouache and Ibrahim, Zulkifilie and Ramli, Suzaimah and Boo, Chai Eong (2015) Real-Time Automatic Inspection System For The Classification Of PCB Flux Defects. American Journal of Engineering and Applied Sciences, 8 (4). p. 504. ISSN 1941-7020

Ang, TeohOng and Ibrahim, Zulkifilie and Ramli, Suzaimah (2014) Computer Machine Vision Inspection On Printed Circuit Boards Flux Defects. American Journal of Engineering and Applied Sciences, 6 (3). pp. 263-273. ISSN 1941-7020

Anis Suhaila, Mohd Zain and Nor Fatihah, Mohd Zain and Fauziyah, Salehuddin and N., Jamaluddin and N., Abdullah Yaacob (2016) Design And Characterization Of 20nm SOI MOSFET Doping Abruptness Dependent. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6344-6348. ISSN 1819-6608

Anisah, Abd Latiff and Noraiham, Mohamad and Jeefferie, Abd Razak and Mohd Hayatunnufus, Md Nasir and Siti Rahmah, Shamsuri and Mazlin Aida, Mahamood and Muhamad Ilman Hakimi Chua, Abdullah and Hairul Effendy, Ab Maulod (2016) Correlation Of Wear Characteristics With Hardness Of Recycled Carbon Fiber Prepreg Reinforced Polypropylene Composites. Journal Of Materials Research, 31 (13). pp. 1908-1913. ISSN 0884-2914

Annathurai, Vinodh and Gan, Chin Kim and Ab Ghani, Mohd Ruddin and Baharin, Kyairul Azmi (2017) Impacts of solar variability on distribution networks performance. International Journal Of Applied Engineering Research, 12 (7). pp. 1151-1155. ISSN 0973-4562

Annathurai, Vinodh and Gan, Chin Kim and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) Shading Analysis For The Siting Of Solar PV Power Plant. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5021-5027. ISSN 1819-6608

Annathurai, Vinodh and Gan, Chin Kim and Ibrahim, Khairul Anwar and Baharin, Kyairul Azmi and Ab Ghani, Mohd Ruddin (2016) A review on the impact of distributed energy resources uncertainty on distribution networks. International Review of Electrical Engineering (IREE), 11 (4). pp. 420-427. ISSN 1827- 6660

Anuar , Mohamed Kassim and Abdul rashid, Mohd Zamzuri and Mohd Rusdy , Yaacob and Abas, Norafizah (2013) Effect of Reference Height Control System on CPG Networks for Quadruped Hopping Robot. Applied Mechanics and Materials , (Volum. pp. 498-502. ISSN 1662-7482

Anuar , Mohamed Kassim and Takashi , Yasuno and Hiroshi, Suzuki and Mohd Aras, Mohd Shahrieel and Jaafar, Hazriq Izzuan and Jafar, Fairul Azni and Subramonian, Sivarao (2016) Conceptual Design And Implementation Of Electronic Spectacle Based Obstacle Detection For Visually Impaired Persons. JOURNAL OF ADVANCED MECHANICAL DESIGN, SYSTEMS, AND MANUFACTURING, 10 (7). pp. 1-12. ISSN 1881-3054

Arif, Sazelin and Sidek, Safiah and Abu Bakar, Nurdinah (2017) Actor-Network Theory (ANT) As An Interpretive Tool To Understand The Use Of Online Technologies : A Review. Asian Journal Of Information Technology, 16. pp. 61-68. ISSN 1682-3915

Arshad, Yusri and Abdul Rahman, Ahlan and Ajayi, BA (2014) Intelligent IT governance decision-making support framework for a developing country's public university. Intelligent Decision Technologies. pp. 131-146. ISSN 1872-4981 (Print)

Arshad, Yusri and Ahlan, Abdul Rahman and Syed Ibrahim, Sharifah Norhafiza (2013) Combining Grounded Theory and Case Study Methods in IT Outsourcing Study. JOURNAL OF INFORMATION SYSTEMS RESEARCH AND INNOVATION. pp. 84-93. ISSN 2289-1358

Asmala, A. (2014) Multitemporal Cloud Detection and Masking Using MODIS Data. Applied Mathematical Sciences, 8 (7). pp. 345-353. ISSN 1312-885X

Asmala, A. and Shaun, Quegan (2016) The Effects of Haze on the Accuracy of Maximum Likelihood Classification. Applied Mathematical Sciences, 10 (39). pp. 1935-1944. ISSN 1312-885X

Asmala, A. and Shaun, Quegan (2014) Haze Modelling and Simulation in Remote Sensing Satellite Data. Applied Mathematical Sciences, 8 (159). pp. 7909-7921. ISSN 1312-885X

Asmala, A. and Shaun, Quegan (2016) Haze Removal Concept in Remote Sensing. Applied Mathematical Sciences, 10 (18). pp. 845-859. ISSN 1312-885X

Ayop, Zakiah and Zainal Abidin, Zaheera and Anawar, Syarulnaziah and Mohd Shuhaimi, Mohammad Ali Arsyad (2014) Monitoring Network And Service:A New Nagios Services Using Smart Notification Management. Journal Of Information Assurance And Security, 9. 043-050. ISSN 1554-1010

Azdiana, Md Yusop and Ramizi, Mohamed and Azah, Mohamed (2016) Inverse Dynamic Analysis Type Of MPPT Control Strategy In A Thermoelectric-Solar Hybrid Energy Harvesting System. Renewable Energy, 86. pp. 682-692. ISSN 0960-1481

Azhari, Muhamad Azwar and Arith, Faiz and Ali, Nurfadzillah and Rodzi, Shekin and A. Karim, Nor Khalilah (2015) Fabrication Of Low Cost Sensitized Solar Cell Using Natural Plant Pigment DYES. ARPN Jurnal Of Engineering And Applied Science, 10 (16). 7092 - 7096. ISSN 1819-6608

Azhari, Muhamad Azwar and Fathe’li, Muhammad Asyraf and Aziz, Nur Syawal Aidill and Mohd Nadzri, Muhammad Syahir and Yusuf, Yusliza (2015) A Review On Addition Of ZINC Dialkyldithiophosphate In Vegetable Oil As Physical Properties Improver. ARPN Journal Of Engineering And Applied Sciences, 10 (15). 6496 - 6500. ISSN 1819-6608

Azhari, Muhamad Azwar and Fathe’li, Muhammad Asyraf and Aziz, Nur Syawal Aidill and Mohd Nadzri, Muhammad Syahir and Yusuf, Yusliza (2015) A Review On Addition Of Zinc Dialkyldithiophosphate In Vegetable Oil As Physical Properties Improver. ARPN Journal Of Engineering And Applied Sciences, 10 (15). pp. 6496-6500. ISSN 1819-6608

Azhari, Muhamad Azwar and Suffian, Quratul Nadia and Mat Nuri @ Md Din, Nur Rashid (2014) The Effect Of Zinc Dialkyldithiophosphate Addition To Corn Oil In Suppression Of Oxidation As Enhancement For Bio Lubricants : A Review. Journal Of Engineering And Applied Sciences, 9 (9). pp. 1447-1449. ISSN 1819-6608

Azhari, Muhamad Azwar and Tamar, Muhamad Faisal and Mat Nuri, Nur Rashid and Yusoff, Mohd Rahimi (2015) Physical Property Modification Of Vegetable Oil As Biolubricant Using ZDDP. ARPN Journal Of Engineering And Applied Sciences, 10 (15). 6525 - 6528. ISSN 1819-6608

Aziz, Ahmad and Omar, Mohd Zaidi and Salleh, Mohd Shukor (2016) Microstructural Evolution Of A333 Alloy Through Semisolid Metal Process. Sains Malaysiana, 45 (6). pp. 977-987. ISSN 0126-6039

Aziz, N. A. and Abdul Latiff, Anas and Lokman, Muhammad Quisar and Hanafi, Effariza and Harun, Sulaiman Wadi (2017) Zinc Oxide-Based Q-Switched Erbium-Doped Fiber Laser. Chinese Physics Letters, 34 (4). 044202-1. ISSN 0256-307X

Aziz , Yahya and Safiah , Sidek and Aida Nasirah, Abdullah and Kalthom, Hussain and Rahman, Hashim and Hanipah, Hussin and Hazmilah, Hasan (2010) Relationship between Technological Frames and Technology Transfer. Proceedings of International Conference on Communication Dynamics 2010. pp. 377-393. ISSN 978-983-2948-75-9

Azma, Putra and Kassim, Dg Hafizah and Mohd Nor, Mohd Jailani and N. S. Muhammad (2014) Effect of pyramidal dome geometry on the acoustical characteristics in a mosque. Journal of Mechanical Engineering and Sciences (JMES), 7. pp. 1127-1133. ISSN 2289-4659

Azma, Putra and Wong, Hee Kiong and Nawal Aswan, Abdul Jalil (2014) Measurement Of Structure-Borne Noise From Road Input In A Motor Vehicle Cabin. Asean Engineering Journal, 4 (2). pp. 29-41. ISSN 2229-127X

Azman, Ahmad and Abdul Rani, Othman and Zahriladha, Zakaria and Kamil, Pongot (2016) A Diplexer Bandpass Filter For Dual Band RF Front-End Receiver At 2.4 GHz And 5.75 GHz. International Journal Of Engineering And Technology (IJET), 8 (3). pp. 1571-1578. ISSN 2319-8613

Azman, Ahmad and Abdul Rani, Othman and Zahriladha, Zakaria and Kamil, Pongot (2016) A Two Stage Of Concurrent Dual-Band Low Noise Amplifier Using Current-Reused With Hi-Pass And Lo-Pass Matching Technique. Journal Of Theoretical And Applied Information Technology, 89 (2). pp. 389-396. ISSN 1992-8645

Azman, Farah Nadia and Zaibon, Syamsul Bahrin and Shiratuddin, Norshuhada (2018) Modelling Learner-Generated Comic Production:An Initial Design. Journal of Engineering and Applied Sciences, 13. pp. 2237-2241. ISSN 1816-949X

Azmi, Awang Md Isa and Mustafa H., Othman and Zahariah, Manap and Mohd Sa'ari, Mohamad Isa and Mohd Shahril Izuan, Mohd Zin and Mohd Shakir, Md Saat and Zahriladha, Zakaria (2016) Improved Location And Positioning Utilizing Single MIMO Base Station In IMT-Advanced System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 75-82. ISSN 2180-1843

Azri, Maaspaliza and Abd.Rahim, Nasrudin (2014) Transformerless Power Converter For Grid-Connected PV System With No-Ripple Input Current And Low Ground-Leakage Current. International Conference on Clean Energy and Technology, -. pp. 1-6. ISSN -

Azri, Maaspaliza and Abdul Rahim, Nasruddin and Mohamad Elias, Mohamad Fathi (2014) Transformerless DC/AC Converter For Grid-Connected PV Power Generation System. Arabian Journal for Science and Engineering, 39. pp. 7945-7956. ISSN 1319-8025

Azziddin, Mohamad Razali and Kamisman, Norazelina and Mat Lazi, Jurifa and Bahari, Norhazilina (2016) HEPWM using differential evolution technique for three phase voltage source inverter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 325-330. ISSN 978-147998598-2

Bahar, Mohd Bazli and Miskon, Muhammad Fahmi and Abu Bakar, Norazhar and Ali @ Ibrahim, Fariz and Shukor, Ahmad Zaki (2014) STS motion control using humanoid robot. Research Journal of Applied Sciences, Engineering and Technology, 8 (1). pp. 95-108. ISSN 2040-7459

Baharom, Mohamad Faizal and Bohari, Zul Hasrizal and Sulaima, Mohamad Fani and Jali, Mohd Hafiz and Jaafar, Hazriq Izzuan and Jamri , Mohd Saifuzam (2015) Assessment of transformer core and winding conditions for distribution transformers using sweep frequency response analysis waveforms. The Journal Of Chemical Physics, 1660 (1). pp. 1-7. ISSN 0094-243X

Bakri, Mohammed Hariri and Abdullah, Abu and Musa, Haslinda and Jayakrishnan, Mailasan and Azmi, Fadhlur Rahim (2018) The adoption of halal food supply chain towards the performance of food manufacturing in Malaysia. Management Science Letters, 8. pp. 755-766. ISSN 1923-9335

Bakri, Mohammed Hariri and Dabas, Nurayati and Ismail, Shafinar and Abdul Hamid, Baharom (2018) Does securitization for government staff personal loan perform? International Journal Of Engineering And Technology (UAE), 7 (3.21). pp. 267-269. ISSN 2227-524X

Bakri, Mohammed Hariri and Rahim Azmi, Fadhlur and Abdullah, Abu and Musa, Haslinda (2018) Perception of small medium and enterprises towards halal food supply chain in Malaysia. International Journal Of Mechanical Engineering And Technology, 9 (11). pp. 821-828. ISSN 0976-6340

Baloch, Muhammad Moazam (2005) Directional Recrystallisation In Mechanically Alloyed Metals. -. pp. 120-131. ISSN -

Bani Hashim, Ahmad Yusairi (2019) Using worn out insole to express human foot. International Journal Of Biomedical Engineering And Technology, 29 (1). pp. 84-99. ISSN 1752-6418

Basari, Amat Amir and Ng, Xue Yan and Kok, Swee Leong and Ahmad Nawir, Nur Amalina (2019) Piezoelectric energy harvesting system via impact and vibration – A review. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 11 (1). pp. 35-41. ISSN 2180-1843

Basari, Amat Amir and Sosuke, Awaji and Song, Wang and Seiji, Hashimoto and Shunji , Kumagai and Kenji, Suto and Hiroaki, Okada and Hideki, Okuno and Bunji, Homma and Wei, Jiang and Shuren, Wang (2014) Shape effect of piezoelectric energy harvester on vibration power generation. Journal Of Power And Energy Engineering, 2 (9). pp. 117-124. ISSN 2327-588X

Basari, Amat Amir and Mohamad, Khairul Anuar and Nain, Arif Zulfadli and Haron, Ahmad Razani and Alias, Afishah and Ibrahim, Pungut (2018) Effect of circular coil dimension on resonant coupling wireless power transfer system. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-6). pp. 19-23. ISSN 2180-1843

Basiron, Halizah and Mohd Aboobaider, Burhanuddin and Mohammed, Ali Abdul-Jabbar and Ismail, Ronizam (2017) Internet of things architecture : Current challenges and future direction of research. International Journal Of Applied Engineering Research, 12 (21). pp. 11055-11061. ISSN 0973-4562

Bong, Yu Jing and Kok, Swee Leong (2017) Investigation On Phase Shifting Effect On The Voltage Output Of Piezoelectric Cantilever Array. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-8. ISSN 1757-8981

Bong, Yu Jing and Kok, Swee Leong (2017) Power Optimization Configuration For Piezoelectric Cantilever Arrays. MATEC Web Of Conferences, 108. pp. 1-6. ISSN 2261-236X

Burairah, Hussin and Abdelrafe, Elzamly (2016) Quantitative and intelligent risk models in risk management for constructing software development projects: A review. International Journal Of Software Engineering And Its Applications, 10 (2). pp. 9-20. ISSN 1738-9984

Burvill, Colin and Field, Bruce and Abdullah, Zulkeflee and Alias, Maizam (2016) Problem-solving with industrial drawings: Supporting formal graphics language development for Malaysian engineering graduates. The International Journal Of Engineering Education, 32 (5). pp. 2172-2183. ISSN 0949149X

Chee, Kiang Lam and Kenneth, Sundaraj and Mohd Nazri, Sulaiman and Fazilawati, A. Qamarruddin (2016) Virtual Phacoemulsification Surgical Simulation Using Visual Guidance And Performance Parameters As A Feasible Proficiency Assessment Tool. BMC Ophthalmology, 16 (1). pp. 1-9. ISSN 1471-2415

Chong, Chee Soon and Rozaimi, Ghazali and Hazriq Izzuan, Jaafar and Sharifah Yuslinda, Syed Hussien and Yahaya, Md. Sam and Mohd Fua'ad, Rahmat (2016) Controller Parameter Optimization For An Electro-Hydraulic Actuator System Based On Particle Swarm Optimization Technique. Jurnal Teknologi, 78 (6-13). pp. 101-108. ISSN 0127-9696

Chong, Shin Horng and Azahar, Arman Hadi and Mohamed Kassim, Anuar and Zainal Abidin, Amar Faiz and Harun, Mohamad Haniff and Nor Shah, Mohd Badril and Mohd Annuar, Khalil Azha and Manap, Mustafa and Rizman, Zairi Ismael (2018) Optimizing Central Pattern Generators (CPG) Controller For One Legged Hopping Robot By Using Genetic Algorithm (GA). International Journal Of Engineering & Technology, 7 (3). pp. 160-164. ISSN 2227-524X

Chong, Shin Horng and Hashimoto, Hideto and Sato, Kaiji (2010) Practical Motion Control With Acceleration Reference For Precision Motion - New NCTF Control And Its Application To Non-Contact Mechanism. Precision Engineering, 35 (1). pp. 12-23. ISSN 0141-6359

Chong, Shin Horng and Kaiji, Sato (2016) Nominal Characteristics Trajectory Following Control As Practical Controller: A Review. IECON 2015 - 41st Annual Conference Of The IEEE Industrial Electronics Society. pp. 4790-4795. ISSN 978-147991762-4

Chong, Shin Horng and Ting, Tze Ter and Sakthi Velu, Vasanthan (2015) Positioning Control Of Ball Screw System Driven By DC Motor. Applied Mechanics And Materials, 761. pp. 142-147. ISSN 1662-7482

Chow, Khoon Keat and Kok, Swee Leong and Lau, Kok Tee (2017) Experimental Evaluation Of Impact Based Flexible Piezoelectric P (VDF-TrFE) Thick-Film. Proceedings Of Mechanical Engineering Research Day 2017. pp. 303-304. ISSN -

Dhar Malingam, Sivakumar and Mohd Amman, Rosmia and Samekto, Haryanti and Mohd Ab Halim, Mohd Firdaus and Abu Shah, Ismail and Sulaiman, Saiful Naim and Subramonian, Sivarao (2018) Influences of draw forming process on the crash analysis of a circular cup. Journal of Advanced Manufacturing Technology (JAMT), 12 (1(2)). pp. 547-559. ISSN 1985-3157

Dhar Malingam, Sivakumar and Mohd Ishak, Noordiana and Mansor, Muhd Ridzuan (2017) Thermoplastic matrix selection for fibre metal laminate using fuzzy VIKOR and entropy measure for objective weighting. Journal of Engineering Science and Technology, 12 (10). pp. 2792-2804. ISSN 2792 - 2804

Dhar Malingam, Sivakumar and Ng, Lin Feng and Jenal, Ruztamreen and Mustafa, Zaleha and Subramonian, Sivarao (2018) A review of the tensile and fatigue responses of cellulosic fibre-reinforced polymer composites. Mechanics Of Advanced Materials and Structures, 27 (8). pp. 1-16. ISSN 1537-6494

Dhar Malingam, Sivakumar and Ng, Lin Feng and Lau, S. M. and Lim, K. T. (2017) Fatigue life behaviour of glass/kenaf woven-ply polymer hybrid biocomposites. Journal of Polymers and the Environment, 26 (2). pp. 499-507. ISSN 1566-2543

Dhar Malingam, Sivakumar and Ng, Lin Feng and Subramaniam, Kathiravan and Ab Ghani, Ahmad Fuad and Jumaat, Faizal Azli (2017) Tensile And Impact Properties Of Cost-Effective Hybrid Fiber Metal Laminate Sandwich Structures. Advances in Polymer Technology, 37 (7). pp. 2385-2393. ISSN 0730-6679

Dhar Malingam, Sivakumar and Pilvamangalam, Nisallini and Bapokutty, Omar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Quasi-static indentation behaviour of kenaf bast fibre reinforced metal laminate system. Defence S &T Technical Bulletin, 10 (3). pp. 258-271. ISSN 1985-6571 (Submitted)

Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli and Subramonian, Sivarao (2017) Investigation on Fatigue Life Behaviour of Sustainable Bio-Based Fibre Metal Laminate. Journal of Mechanical Engineering, SI 1 (1). pp. 123-140. ISSN 1823-5514

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Ng, Lin Feng and Ali, Mohd Basri and Selamat, Mohd Zulkefli and Bapokutty, Omar and Subramonian, Sivarao (2018) Experimental investigation on Charpy impact response of kenaf bast fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 822-827. ISSN 1819-6608

Dhar Malingam, Sivakumar and Subramaniam, Kathiravan and Selamat, Mohd Zulkefli and Said, Md Radzai and Subramonian, Sivarao (2016) A study on impact behaviour of a novel oil palm fibre reinforced metal laminate system. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2483-2488. ISSN 1819-6608

Din, Abdul Talib and Tan, Chee Fai and Ng, Eng Sia (2012) Mechanical design and analysis of all-terrain mobile robot. Jurnal Teknologi, UTM, 58. 21 -25. ISSN 0127-9696

Draman @ Muda, Azah Kamilah and Azmi, Mohd Sanusi and Draman @ Muda, Noor Azilah and Arbain, Nur Atikah and Radzid, Amirul Ramzani (2018) Offline handwritten digit recognition using triangle geometry properties. International Journal of Computer Information Systems and Industrial Management Applications, 10. 087 - 097. ISSN 2150-7988

Draman @ Muda, Azah Kamilah and Choo, Yun Huoy and Draman @ Muda, Noor Azilah (2013) SOCIFS feature selection framework for handwritten authorship. International Journal of Hybrid Intelligent Systems. pp. 83-91. ISSN 1875-8819

Draman @ Muda, Azah Kamilah and Choo, Yun Huoy and Pratama, Satrya Fajri (2011) Feature selection methods for writer identification: A comparative study. International Journal on Procedia Engineering 2011. pp. 1-10.

Draman @ Muda, Azah Kamilah and Choo, Yun Huoy and Pratama, Satrya Fajri (2013) Feature selection methods for writer identification: A comparative study. Transaction On Electrical And Electronic Circuits And Systems. pp. 10-16.

Duraisamy, Navaneethan and Karuppiah, Rajammal and Kasi, Ramesh and T. Subramaniam, Ramesh and Dhar Malingam, Sivakumar (2017) Na-doped LiMnPO4 as an electrode material for enhanced lithium ion batteries. Bulletin of Materials Science, 40 (1). pp. 171-175. ISSN 0250-4707

Ebrahim, Zuhriah and Abdul Rasib, Amir Hamzah (2017) Unnecessary overtime as a component of time loss measures in assembly processes. Journal Of Advanced Manufacturing Technology, 11 (1). pp. 37-47. ISSN 1985-3157

Ebrahim, Zuhriah and Abdul Wahab, Amelia Natasya and Shamsuddin, Taufiqurrahman (2015) Fit manufacturing: Analogy of human fitness components. Applied Mechanics And Materials, 761. pp. 571-575. ISSN 1662-7482

Ebrahim, Zuhriah and Muhamad, Mohd Razali and Abdul Rasib, Amir Hamzah (2018) Inefficient processing time as hidden time loss in assembly operations. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (10). pp. 1-5. ISSN 2180 – 1843

El Tawil, Naji Ammar Mansour and Sulaiman, Marizan and Shamshiri, Meysam and Ibrahim, Zulkifilie (2019) Optimum allocation of capacitor and DG in MV distribution network using PSO and opendss. ARPN Journal Of Engineering And Applied Sciences, 14 (2). pp. 363-371. ISSN 1819-6608

Elzamly, Abdelrafe and Hussin, Burairah and Abu Naser, Samy S. and Doheir, Mohamed A. S. (2015) Classification of software risks with discriminant analysis techniques in software planning development process. International Journal of Advanced Science and Technology, 81 (-). pp. 35-48. ISSN 2005-4238

Elzamly, Abdelrafe and Hussin, Burairah and Abu Naser, Samy S. and Doheir, Mohamed A. S. (2015) Predicting software analysis process risks using linear stepwise discriminant analysis : Statistical methods. International Journal Of Advanced Information Science And Technology, 38 (38). pp. 108-115. ISSN 2319-2682

Elzamly, Abdelrafe and Hussin, Burairah and Md Salleh, Norhaziah (2015) Methodologies and techniques in software risk management approach for mitigating risks: A review. Asian Journal Of Mathematics And Computer Research, 2 (4). pp. 184-198. ISSN 2395-4205

Engku Mohamed, Engku Ahmad Azrulhisham and Yusuff, Mohd Asri and Abd Wahab, Dzuraidah and Nik Abdullah, Nik Mohamad Amin and Abdullah, Shahrum and Che Haron, Che Hassan (2010) Evaluation of fatigue life reliability of steering knuckle using pearson parametric distribution model. International Journal of Quality, Statistics, and Reliability, 2010. pp. 1-8. ISSN 1687-7152

Ernawan, Ferda and Abu, Nor Azman and Herman, Nanna Suryana (2013) Adaptive Tchebichef moment transform image compression using psychovisual model. Journal Of Computer Science, 9 (6). pp. 716-725. ISSN 1549-3636

Ernawan, Ferda and Abu, Nor Azman and Herman, Nanna Suryana (2013) Vowel recognition using discrete Tchebichef transform. Journal Of Applied Sciences, 13 (3). pp. 465-471. ISSN 1812-5654

Fadilah, Suzi Iryanti and Shibghatullah, Abdul Samad and Abal Abas, Zuraida and Abd Wahab, Mohd Helmy and Hashim, Wan Nur Wahidah (2014) Performance Analysis For Wireless G (IEEE 802.11 G) And Wireless N (IEEE 802.11 N) In Outdoor Environment. ARPN Journal Of Engineering And Applied Sciences, 9 (10). pp. 1725-1731. ISSN 1819-6608

Fairul Azhar, Abdul Shukor and Raja Nor Firdaus Kashfi, Raja Othman and Mohd Luqman, Mohd Jamil (2016) Design Of A Linear DC Motor For High Thrust Constants Characteristics. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8764-8769. ISSN 1819-6608

Fairus , Abu and Ahmad Rozelan, Yunus and Izaidin, Abdul Majid and Juhaini, Jabar and Amir, Aris and Hamzah , Sakidin (2014) Empowering smart customer to participate in electricity supply system: Extended of technology acceptance model. Journal of Technology Management and Technopreneurship. pp. 85-94. ISSN 2231-7996 (In Press)

Fairuz Fazillah, Shuhimi and Mohd Fadzli, Abdollah and Md Abul, Kalam and Masjuki, Hassan and Ashafi'e, Mustafa and Hilmi, Amiruddin (2016) Tribological Characteristics Comparison For Oil Palm Fibre/Epoxy And Kenaf Fibre/Epoxy Composites Under Dry Sliding Conditions. Tribology International, 101. pp. 247-254. ISSN 0301-679X

Farah Khalidah, Abdul Rahman and Mohd Shakir, Md Saat and Liyana Hazwani, Zamri and Nor Mazidah, Husain and N. A., Naim and Siti Amirah, Mohd Padli (2016) Design Of Class-E Rectifier With DC-DC Boost Converter. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 89-95. ISSN 2180-1843

Fateeha Muda, Ayuni and Mohd Saad, Norhashimah and Syed Abu Bakar, Syed Abdul Rahman and Muda, Sobri and Abdullah, Abdul Rahim (2015) Brain Lesion Segmentation Using Fuzzy C-Means On Diffusion-Weighted Imaging. ARPN Journal Of Engineering And Applied Sciences, 10 (3). pp. 1138-1144. ISSN 1819-6608

Fatheli, Mohamad Haireen and Zolkifri, Nur Izzati and Gan, Chin Kim and Yusup Lada, Musa (2017) Development Of Load Control Algorithm For PV Microgrid. International Journal Of Electrical And Computer Engineering (IJECE), 7 (2). pp. 619-630. ISSN 2088-8708

Fauzi, Nur Faiqah and Mohamad Jaya, Abdul Syukor and Mohammad Jarrah, Mu’ath Ibrahim and Akbar, Habibullah (2017) Thin Film Roughness Optimization In The Tin Coatings Using Genetic Algorithms. Journal Of Theoretical And Applied Information Technology, 95 (24). pp. 6690-6698. ISSN 1992-8645

Ferda, Ernawan and Nor Azman, Abu and Nanna Suryana, Herman (2014) An Adaptive JPEG Image Compression Using Psychovisual Model. Advanced Science Letters, 20. pp. 26-31. ISSN 1936-6612

Feroz, Farah Shahnaz and Leicht, Gregor and Steinmann, Saskia and Andreou, Christina and Mulert, Christoph (2017) The Time Course Of Activity Within The Dorsal And Rostral-Ventral Anterior Cingulate Cortex In The Emotional Stroop Task. Brain Topography, 30 (1). pp. 30-45. ISSN 0896-0267

Foo, Jia En and Chong, Shin Horng and Mohd Nor, Rozilawati and Loh, Ser Lee (2016) Positioning Control Of A One Mass Rotary System With CM NCTF Controller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (11). pp. 125-129. ISSN 2180-1843

Gan, Chin Kim and Lau, Cheiw Yun and Tan, Pi Hua (2014) Evaluation Of Solar Photovoltaic Levelized Cost Of Energy For PV Grid Parity Analysis In Malaysia. International Journal of Renewable Energy Resources, 4 (1). pp. 28-34. ISSN 2289-1846

Gan, Chin Kim and Wirun, Prayun and Tan, Chee Wei and Meysam, Shamshiri (2014) Design Of A Hybrid Diesel/PV/Wind/Battery System In Remote Areas. International Review Of Electrical Engineering (IREE), 9 (2). pp. 420-430. ISSN 1827- 6660

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Suaidi, Mohamad Kadim (2014) Alleviate exposed node issues in Wireless Mesh Network (WMN) using a novel approach of Concurrent Medium Access Control (C-MAC) protocol. International Journal of Research in Engineering and Technology (IJRET), 03 (11). pp. 551-556. ISSN E-ISSN: 2319-1163, ISSN: 2321-7308

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Abdul Latiff, Anas (2013) An Enhancement of RTS/CTS Control Handshake in CSMA/CA Based MAC Protocol for an Efficient Packet Delivery over Multihop Wireless Mesh Network (WMN). International Journal of Research in Engineering and Technology (IJRET), Vol-02 (Iss-10). pp. 604-608. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Latiff, Anas (2013) ZIGBEE-BASED SMART FALL DETECTION AND NOTIFICATION SYSTEM WITH WEARABLE SENSOR (e-SAFE). International Journal of Research in Engineering and Technology (IJRET), Vol-02 (Iss-08). pp. 337-344. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Gannapathy, Vigneswara Rao and Tuani Ibrahim, Ahamed Fayeez and Zakaria, Zahriladha and Othman, Abdul Rani and Jalaudin, Nur Qalbi (2014) A review on various types of Software Defined Radios (SDRs) in radio communication. International Journal of Research in Engineering and Technology (IJRET), 3 (12). pp. 203-209. ISSN eISSN: 2319-1163 | pISSN: 2321-7308

Ghazali, Rozaimi and Saad, Mohammad Zyzerull and Syed Hussien, Sharifah Yuslinda and Jali, Mohd Hafiz and Zohedi, Fauzal Naim and Ahmad Izzuddin, Tarmizi (2017) Intelligent Controller Design For Multifunctional Prosthetics Hand. International Journal Of Mechanical Engineering And Robotics Research, 6 (6). pp. 495-501. ISSN 2278-0149

Goh, Siew Yun and Kok, Swee Leong (2017) Optimization Of Electrical Energy Harvesting From Focused Infrared Light Using Thermoelectric Module With Uniform Heat Distribution. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3). pp. 105-110. ISSN 2180-1843

Goh, Siew Yun and Kok, Swee Leong (2017) Self-Powered Thermoelectric Based Cooling System For LCD Panel. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-13). pp. 35-38. ISSN 2180-1843

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) Analysis and development of recycled materials for wood plastic composite product. Elixir Mech. Engg., 51 (51). pp. 10834-10840. ISSN 2229 -712X

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI and PERUMAL, PUVANASVARAN and ABD RAZAK , JEEFFERIE (2012) Real of Simply Assembly Line Balancing using Fact-Model. International Journal of Computer and Electrical Engineering, 4 (6). pp. 870-874. ISSN 1793-8163

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI (2012) TAGUCHI’S QUALITY IMPROVEMENT ANALYSIS OF THE SME BREAD MANUFACTURING. Global Engineers & Technologists Review, 2 (9). pp. 6-18. ISSN 2231-9700

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI and YAHAYA, SAIFUDIN HAFIZ (2012) HOW TO MEASURE AND IDENTIFY THE ULTIMATE IMPROVEMENT REQUIRED FOR CUSTOMER SATISFACTION. Global Engineers & Technologists Review, 2 (11). pp. 15-28. ISSN 2231-9700

HASOLOAN, HAERY IAN PIETER and YAAKOB, MOHD YUHAZRI and YAHAYA, SAIFUDIN HAFIZ (2012) REVISITED THE IMPORTANCE AND PERFORMANCE ANALYSIS (IPA) AND KANO MODEL FOR CUSTOMER SATISFACTION MEASUREMENT. Global Engineers & Technologists Review, 2 (1). pp. 22-39. ISSN 2231-9700

Habban, Mohd Faiz and Manap, Mustafa and Abdullah, Abdul Rahim and Jopri, Mohd Hatta (2017) An Evaluation Of Linear Time Frequency Distribution Analysis For Vsi Switch Faults Identification. International Journal Of Power Electronics And Drive Systems (Ijpeds), 8 (1). p. 31. ISSN 2088-8708

Haeryip , Sihombing (2012) An Analysis of the Customer Satisfaction: A Case Study of Bank Service. International Journal of Application or Innovation in Engineering & Management (IJAIEM), 1 (2). pp. 33-43. ISSN 2319 - 4847

Hairol Nizam, Mohd Shah and Marizan, Sulaiman and Ahmad Zaki, Shukor and Mohd Zamzuri, Ab Rashid (2016) Vision Based Identification And Detection Of Initial, Mid And End Points Of Weld Seams Path In Butt-Welding Joint Using Point Detector Methods. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 57-61. ISSN 2180-1843

Hairol Nizam, Mohd Shah and Marizan, Sulaiman and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin and Mohd Zamzuri, Ab Rashid (2016) A Review Paper On Vision Based Identification, Detection And Tracking Of Weld Seams Path In Welding Robot Environment. Modern Applied Science, 10 (2). pp. 83-89. ISSN 1913-1844

Hairol Nizam, Mohd Shah and Mohd Zamzuri, Ab Rashid and Marizan, Sulaiman and Ahmad Zaki, Shukor (2016) Vision Based Identification And Classification Of Weld Defects In Welding Environment: A Review. Indian Journal Of Science And Technology (INDJST), 9 (20). pp. 1-15. ISSN 0974-6846

Hairol Nizam , Mohd Shah and Marizan, Sulaiman and Ahmad Zaki , Shukor and Mohd Zamzuri, Ab Rashid (2017) Recognition Of Butt Welding Joints Using Background Subtraction Seam Path Approach For Welding Robot. International Journal Of Mechanical & Mechatronic Engineering (Ijmme), 17 (1). pp. 57-62. ISSN 2227-2771

Haji Azlan, Umar Al-Amani and Mohd Noor, Ahmad Fauzi (2017) A Study On Structural Stability Of Bismuth Titanate With Lanthanum Doping For Improved Ferroelectric Properties. Bulletin Of Materials Science, 40 (230). pp. 1-6. ISSN 0250-4707

Halim, Isa and Omar, Noor Rawaida and Kamat, Seri Rahayu and Abdullah, Rohana and Saptari, Adi and Othman, Mohd Shahrizan (2014) Analysis Of Muscle Activity Using Surface Electromyography For Muscle Performance In Manual Lifting Task. Applied Mechanics and Materials, 564. pp. 644-649. ISSN 1660-9336

Halim, Isa and Radin Umar, Radin Zaid and Ahmad, Nadiah and Abdul Rahim, Ruslinda and Zakaria, Nurul Farahizzati (2017) Conceptual Design Of Shielded Metal Arc Welding Workstation: Work Posture And Bead Dimension Consideration. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 19-32. ISSN 1985-3157

Halim, Isa and Radin Umar, Radin Zaid and Padmanathan, Vinothini and Too, Yi Wei (2018) Physical Risk Factors And Observational Tools For Computer Office Workers–An Overview. International Journal Of Mechanical Engineering And Technology (Ijmet), 9. 694–704. ISSN 0976-6359

Hameed, Atyaf Khalid and Dewayanto, Nugroho and Dongyun, Du and Nordin, Mohd Ridzuan and Ab Rahim, Mohd Hasbi (2016) Kinetic and thermodynamics of methylene blue adsorption onto zero valent iron supported on mesoporous silica. Bulletin Of Chemical Reaction Engineering And Catalysis, 11 (2). pp. 250-261. ISSN 1978-2993

Hamid, Mohd Saad and Abd Wahab, Muhammad Amirul and Abdullah, Rasyidah and Abd Gani, Shamsul Fakhar and Hamzah, Rostam Affendi (2019) Development Of Water Quality Monitoring For Smart Aquaculture System. Journal Of Engineering And Applied Sciences, 14 (9). pp. 2840-2847. ISSN 1816-949X

Hamid, Mohd Saad and Abd Wahab, Muhammad Amirul and Abdullah, Rasyidah and Abd Gani, Shamsul Fakhar and Hamzah, Rostam Affendi (2019) Development Of Water Quality Monitoring For Smart Aquaculture System. Journal Of Engineering And Applied Sciences, 14 (9). pp. 2840-2847. ISSN 1816-949X

Hamid, Mohd Saad and Hamzah, Rostam Affendi and Kadmin, Ahmad Fauzan and Abd Gani, Shamsul Fakhar and A Aziz, Khairul Azha and Salam, Saifullah and Tg. Wook, Tg Mohd Faizal (2018) Gradient Magnitude Differences And Guided Filter For Stereo Video Matching Algorithm. JOURNAL OF TELECOMMUNICATION, ELECTRONIC AND COMPUTER ENGINEERING (JTEC), 10. pp. 77-80. ISSN 2180-1843

Hamzah, Rostam Affendi and Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Kadmin, Ahmad Fauzan and Salam, Saifullah (2018) Disparity Map Algorithm Based On Edge Preserving Filter For Stereo Video Processing. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-7). pp. 59-62. ISSN 2180-1843

Hamzah, Rostam Affendi and Gan, Melvin Yeou Wei and Nik Anwar, Nik Syahrim (2019) Stereo Matching Based On Absolute Differences For Multiple Objects Detection. TELKOMNIKA (Telecommunication Computing Electronics And Control), 17 (1). pp. 261-267. ISSN 1693-6930

Hamzah, Rostam Affendi and Ibrahim, Haidi (2018) Improvement Of Stereo Matching Algorithm Based On Sum Of Gradient Magnitude Differences And Semi-Global Method With Refinement Step. Electronics Letters, 54. pp. 876-878. ISSN 0013-5194

Hamzah, Rostam Affendi and Ibrahim, Haidi (2016) Literature Survey On Stereo Vision Disparity Map Algorithms. Journal Of Sensors, 2016 (-). pp. 1-23. ISSN 1687-725X

Hamzah, Rostam Affendi and Ibrahim, Haidi and Abu Hassan, Anwar Hasni (2016) Stereo Matching Algorithm Based On Illumination Control To Improve The Accuracy. Image Analysis & Stereology, 35 (1). pp. 39-52. ISSN 1580-3139

Hamzah, Rostam Affendi and Ibrahim, Haidi and Abu Hassan, Anwar Hasni (2017) Stereo Matching Algorithm Based On Per Pixel Difference Adjustment, Iterative Guided Filter And Graph Segmentation. Journal Of Visual Communication And Image Representation, 42. pp. 145-160. ISSN 1047-3203

Hamzah, Rostam Affendi and Kadmin, Ahmad Fauzan and Abd Gani, Shamsul Fakhar and Hamid, Mohd Saad and Salam, Saifullah (2017) Disparity Refinement Process Based On Ransac Plane Fitting For Machine Vision Applications. Journal Of Fundamental And Applied Sciences, 9 (4S). pp. 226-237. ISSN 1112-9867

Hamzah Asyrani, Sulaiman and Abdullah, Bade and Mohd Harun, Abdullah (2016) Inner AABB For Distance Computation In Collision Detection. Jurnal Teknologi, 78 (2). pp. 21-26. ISSN 0127-9696

Hanifah, Abdul Hamid and Mokhtar, Mohd Yusof (2016) Conceptualizing Global Cloud Landscape: A Review Of Adoption Issues And Challenges. Research Journal Of Applied Sciences, 11 (6). pp. 333-339. ISSN 1815-932X

Hanim, Abdul Razak and Hazura, Haroon and Siti Khadijah, Idris and Anis Suhaila, Mohd Zain and Fauziyah, Salehuddin and P. Susthitha, Menon and Sahbudin, Shaari (2016) Modeling Mach Zehnder Interferometer (MZI) Modulator On Silicon-On-Insulator (SOI). Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 121-124. ISSN 2180-1843

Haron, Nor Zaidi and Siti Aisah , Mat Junos @ Yunus and Abdul Aziz, Amir Shah (2007) A Web Based System For Evaluating Occupational Stress. IEEE. pp. 136-139. ISSN 1536-1225 (Submitted)

Haroon, Hazura and Abu Mansor, Abdul Aziz and Abdul Razak, Hanim and Idris, Siti Khadijah and Mohd Zain, Anis Suhaila and Salehuddin, Fauziyah (2019) Experimental Performance Analysis Of Macrobending Loss Characteristics In Polymer Optical Fiber. Journal Of Advanced Research In Applied Sciences And Engineering Technology, 14 (1). pp. 1-7. ISSN 2462-1943

Haroon, Hazura and Neamah, Watheq Abdulkareem (2019) Statistical Analysis On Impact Of Temperature To Fiber Bragg Grating Sensor Performance. Optoelectronics And Advanced Materials – Rapid Communications, 13 (5-6). pp. 290-294. ISSN 1842-6573

Haroon, Hazura and Abdul Razak, Hanim and Khalid, Siti Sarah and N., Nadia and A., Aziz (2017) On The Effectiveness Of Taguchi Method In Optimizing The Performance Of Parallel Cascaded MRR Array (PCMRRA). Optoelectronics And Advanced Materials – Rapid Communications, 11 (7-8). pp. 393-397. ISSN 1842-6573

Haroon, Hazura and Khalid, Siti Sarah (2017) An Overview Of Optical Fiber Sensor Applications In Liquid Concentration Measurements. Journal Of Advanced Review On Scientific Research, 36 (1). pp. 1-7. ISSN 2289-7887

Harriman, Razman and Azmi, Awang Md Isa and W.A.A., W. Razali and Mohamad Kadim, Suaidi and Mohd Shahril Izuan, Mohd Zin (2016) A Preliminary Study Of Characterization Techniques For Reticle ESD Threshold Voltage Measurement. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 53-57. ISSN 2180-1843

Harum, Norharyati and Zakaria, Nurul Azma and Emran, Nurul Akmar and Ayop, Zakiah and Anawar, Syarulnaziah (2019) Smart book reader for visual impairment person using IoT device. International Journal Of Advanced Computer Science And Applications (IJASCA), 10 (2). pp. 251-255. ISSN 2158-107X

Harum, Norharyati and Abu, Nor Azman and Ali, Mohanad Faeq (2018) Hybrid LTE-Vanets Based Optimal Radio Access Selection. ARPN Journal Of Engineering And Applied Sciences, 13. pp. 391-397. ISSN 1819-6608

Harun, Mohamad Hafiz and Zahmani, Qamar Fairuz and Hudha, Khisbullah and Sariman, Mohd Zahar and Harun, Mohd Hanif and Ahmad, Fauzi and Azhari, Muhamad Azwar (2017) Stability Enhancement Of Railway Vehicle Dynamics Performance In Lateral Direction Using Fuzzy Bogie-Based Skyhook Control. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4219-4224. ISSN 1819-6608

Harun, Mohd Hanif and W Abdullah, Wan M Zailimi and Jamaluddin, Hishamuddin and Ab Rahman, Roslan and Hudha, Khisbullah and Harun, Mohamad Hafiz (2014) Study The Potential Application Of Smart Fluid Material And Force Tracking Control Of Magnetorheological Damper. Applied Mechanics And Materials, 699. pp. 348-353. ISSN 1662-7482

Harun, Mohd Hanif and W. Abdullah @ Zakaria, W. Mohd Zailimi and Jamaluddin, Hishamuddin and Abd. Rahman, Roslan and Hudha, Khisbullah (2014) Analysis Of Primary And Secondary Lateral Suspension System Of Railway Vehicle. Journal of Mechanical Engineering, 11 (2). pp. 19-40. ISSN 1823- 5514

Harun, Mohd Hanif and W. Abdullah@Zakaria, W. Mohd Zailimi and Jamaluddin, Hishamuddin and Ab Rahman, Roslan and Hudha, Khisbullah (2014) Hybrid Skyhook-Stability Augmentation System For Ride Quality Improvement Of Railway Vehicle. Applied Mechanics And Materials, 663. pp. 141-145. ISSN 1662-7482

Harun, Nurul Hatiqah and Kasim, Mohd Shahir and Zainal Abidin, Muhammad Zaimi and Raja Abdullah, Raja Izamshah and Attan, Hassan and Ganesan, Hema Nanthini (2018) A Study On Surface Roughness During Fused Deposition Modelling: A Review. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (1)). pp. 25-35. ISSN 1985-3157

Harun, Sulaiman Wadi and Dutta, Debjit and Paul, Mukul Chandra and Dhar, Anirban and Das, Shyamal K. and Mohd Rusdi, Muhammad Farid and Abdul Latiff, Anas and Ahmad, Harith (2019) Newly developed chromium-doped fiber as a saturable absorber at 1.55- and 2.0-µm regions for Q-switching pulses generation. Optical Fiber Technology, 48. pp. 144-150. ISSN 1068-5200

Harun, Sulaiman Wadi and Pinninty, Harshavardhan Reddy and Paul, Mukul Chandra and Das, Shyamal K. and Dhar, Anirban and Abd Kadir, Noraniza and Ismail, Ezzatul Irradah and Abdul Latiff, Anas (2017) Erbium-doped zirconia-alumina silica glass-based fiber as a saturable absorber for high repetition Rate Q-switched all-fiber laser generation. Chinese Physics Letters, 34 (8). 084203-1-084203-4. ISSN 0256-307X

Hasan, Hayfaa Mohammed Hussein and Sulaiman, Marizan and Omar, Rosli and Mohd Aras, Mohd Shahrieel (2017) Effect Of Double Fuzzy Logic Controller (DFLC) Based On Power System Stabilizer (PSS) On A Tie- Line Two Generators System. ARPN Journal Of Engineering And Applied Sciences, 12 (21). pp. 6130-6139. ISSN 1819-6608

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Decision support system classification and its application in manufacturing sector: A review. Jurnal Teknologi, 79 (1). pp. 153-163. ISSN 0127-9696

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab Rahman, Mohd Nizam (2017) Sustainable-ERP system: A preliminary study on sustainability indicators. Journal Of Advanced Manufacturing Technology, 11 (1(SI)). pp. 61-73. ISSN 1985-3157

Hasan, Muhammad Syahid and Ebrahim, Zuhriah and Wan Mahmood, Wan Hasrulnizzam and Ab. Rahman, Mohd Nizam (2018) Factor influencing enterprise resource planning system: A review. Journal of Advanced Manufacturing Technology (JAMT) , 12 (1). pp. 247-258. ISSN 1985-3157

Hasan, Rafidah and Azmi, Muhamad Syafwan and Rosli , Nur Ameelia and Alkahari , Mohd Rizal and Ismail , Rainah (2018) Static And Dynamic Analysis Of FDM Printed Lattice Structures For Sustainable Lightweight Material Application. Progress In Industrial Ecology, 12. pp. 247-259. ISSN 1476-8917

Hasan Basari, Abd Samad and Razali, Hazlina and Hussin, Burairah and Asmai, Siti Azirah and Ibrahim, Nuzulha Khilwani and Shibghatullah, Abdul Samad (2014) Markovian Approach Enhancement To Simplify Optimal Mean Estimation. Applied Mathematical Sciences, 8 (111). pp. 5507-5516. ISSN 1314-7552

Hasan Basari, Abd Samad and Yusop, Noorezam and Hussin, Burairah and Shibghatullah, Abdul Samad (2014) Hybrid of Boyer Moore and rule based system for mobile library book information. International Journal Of Computer Applications, 90 (5). pp. 21-28. ISSN 0975-8887

Hashim, Nik Mohd Zarifie and Wan Mazlan, Wan Nurul Alia and Aziz, Khairul Azha A (2014) Image based face detection using probabilistic neural network. International Journal for Research in Applied Science and Engineering Technology (IJRASET), 2 (VIII). pp. 12-17. ISSN 2321-9653

Hashim, Hanizam and Mohamad, Noraiham and Azlan, Umar Al-Amani and Mohd Ahyan, Muhammad Qamaruddin (2017) Process Optimization Of EDM Cutting Process On Tool Steel Using Zinc Coated Electrode. MATEC Web Of Conferences, 97. pp. 1-5. ISSN 2261-236X

Hashim, Hanizam and Salleh, Mohd Shukor and Omar, M.Z. and Sulong, A.B. (2019) Effects Of Mechanical Stirring And Short Heat Treatment On Thixoformed Of Carbon Nanotube Aluminium Alloy Composite. Journal Of Alloys And Compounds, 788. pp. 83-90. ISSN 0925-8388

Hashim, Nik Mohd Zarifie and Hassan Basri, Hassriaizam and Jaafar, Anuar and Abd Aziz, Mohamad Zoinol Abidin and Salleh, Azahari and Ja'afar, Abd Shukur (2014) Speech Processing In Digital Signal Processing. ARPN Journal Of Engineering And Applied Sciences, 9 (9). pp. 1653-1658. ISSN 1819-6608

Hashim, Norlezah and Idris, Fakrulradzi and Kadmin, Ahmad Fauzan and Jaapar Sidek, Siti Suhaila (2019) Automatic Traffic Light Controller For Emergency Vehicle Using Peripheral Interface Controller. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1788-1794. ISSN 2088-8708

Hashim, Nurul Akmal and Zainal Abidin, Zaheera and Shibghatullah, Abdul Samad (2017) Iris Feature Detection Using Split Block And PSO For Iris Identification System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (1-2). pp. 99-102. ISSN 2180-1843

Hashim, Ummi Rabaah and Draman @ Muda, Azah Kamilah and Kanchymalay, kasturi and A. Jalil, Intan Ermahani and Mohd Hashim, Siti Zaiton and Othman, Muhammad Hakim (2017) Systematic feature analysis on timber defect images. International Journal Of Advances In Intelligent Informatics, 3. pp. 56-67. ISSN 2442-6571

Hashim, Ummi Rabaah and Kanchymalay, kasturi and Salim, Naomie and Sukprasert, Anupong and Krishnan, Ramesh (2017) Multivariate Time Series Forecasting Of Crude Palm Oil Price Using Machine Learning Techniques. IOP Conference Series: Materials Science And Engineering, 226. pp. 1-9. ISSN 1757-8981

Hasim, Norhaslinda and Chong, Shin Horng and Ibrahim, Zulkifilie (2017) CM NCTF With Velocity Feedforward Controller Design For Tracking Control Of An AC Driven X-Y Ball Screw Mechanism. Communications In Computer And Information Science, 752. pp. 149-159. ISSN 1865-0929

Hasim, Norhaslinda and Chong, Shin Horng and Khor, Hooi Khee (2016) Disturbance Observer-Based Motion Control For A Simple Direct Drive System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (5). pp. 41-47. ISSN 2180-1843

Hassan, M. A. and Hashim, Nik Mohd Zarifie and Mohd Saad, Norhashimah and Ab Hadi, Nik Azran and Salleh, Azahari and Ja'afar, Abd Shukur (2015) Digital Signal Processing Applications : Digital Communications. International Journal for Advance Research in Engineering and Technology, 3 (IX). pp. 20-23. ISSN 2320-6802

Hassan, Muhammad Zahir and Abdul Aziz, Mohd Kamarul Hafis and Delbressine, Frank L.M. and Rauterberg, Matthias (2016) Numerical analysis of spring stiffness in vehicle design development stage. International Journal of Applied Engineering Research, 11 (7). pp. 5163-5168. ISSN 0973-4562

Hassan, Nornikman and Noor Azizi, Muhammad Syafiq and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Abu Bakar, Hamizan and Ramli, Mohamad Hafize and Othman, Mohd Azlishah and Sulaiman, Hamzah Asyrani (2017) Rectangular Microstrip Patch Antenna With Different Location Of Minkowski Island Split Ring Resonator (MI-SRR) Structure. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-5). pp. 13-16. ISSN 2180-1843

Hassan, Nornikman and Zakaria, Zahriladha and Sam, Weng Yik and Mohd Hanapiah, Izyan Nazihah and Mohamad, A.Nasoruddin and Roslan, Ameer Farhan and Ahmad, Badrul Hisham and Ismail, Mohd Khairy and Abd. Aziz, Mohamad Zoinol Abidin (2019) Design Of Dual-Band Microstrip Patch Antenna With Right-Angle Triangular Aperture Slot For Energy Transfer Application. International Journal Of RF And Microwave Computer-Aided Engineering, 29 (1). pp. 1-11. ISSN 1096-4290

Hassan, Nornikman and Ahmad, Badrul Hisham and Abd. Aziz, Mohamad Zoinol Abidin and Abu Bakar, Hamizan (2018) Dual Frequencies Band And Enhanced Wideband Effect Of Dual Layer Microstrip Patch Antenna With Parasitic. Journal Of Physics: Conference Series, 1049. pp. 1-7. ISSN 1742-6588

Hayfaa, Mohammed Hussein Hasan and Marizan, Sulaiman and Mohammed Rasheed, Jubair Al-Hiealy and Rosli, Omar and Mohd Shahrieel, Mohd Aras (2016) Comparative Studies Of Fuzzy Logic Base Power System Stabilizers In Enhancing Dynamic Stability Of A Generator Connected To Infinite Bus. World Applied Sciences Journal (WASJ), 34 (10). pp. 1370-1379. ISSN 1818-4952

Hazura, Haroon and Hanim, Abdul Razak and Nurul Nadia, Abd Aziz (2016) Performance Enhancement Of Optical Microring Resonator Using Taguchi Method Experimental Design. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3212-3216. ISSN 1819-6608

Hazura, Haroon and Nadia, A. A. and Hanim, Abdul Razak and Anis Suhaila, Mohd Zain and S. K., Othman and Fauziyah, Salehuddin (2016) Optical Routers Based On Microring Resonator For Optical Networks-On-Chip. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 41-44. ISSN 2180-1843

Hazura, Haroon and Nurul Nadia, Abd Aziz and Hanim, Abdul Razak and Anis Suhaila, Mohd Zain and S. K., Othman and Fauziyah, Salehuddin (2016) MRR Filter Characterizations In WDM System For Digital Signals Transmissions. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 29-32. ISSN 2180-1843

Herman, Nanna Suryana and Abu, Nur Azman and Ernawan, Ferda (2014) Integrating a smooth psychovisual threshold into an adaptive JPEG image compression. Journal Of Computers, 9 (3). pp. 644-653. ISSN 1796-203X

Hidayah, Rahmalan and Zaheera, Zainal Abidin and Zuraida, Abal Abas and Ahmad Fadzli Nizam, Abdul Rahman and Abdul Samad, Shibghatullah and Ong, Rhui Yong (2016) Prototype Deployment Of Examination And Quiz System (EQs) With Outcome Based Education In Networking System. 2015 IEEE International Conference On Communication, Networks And Satellite (COMNESTAT). pp. 43-47. ISSN 978-146738249-6

Hisamuddin, N. and Jusoh, Zulzilawati and Zakaria, U. N. and Zulkifli, Mohd Zamani and Abdul Latiff, Anas and Yasin, Moh and Ahmad, Harith and Harun, Sulaiman Wadi (2017) Q-Switched Raman Fiber Laser With Titanium Dioxide Based Saturable Absorber. Optoelectronics And Advanced Materials – Rapid Communications, 11 (3-4). pp. 127-130. ISSN 1842-6573

Hisyam, Mohamad Badrol and Mohd Rusdi, Muhammad Farid and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Generation Of Mode-Locked Ytterbium Doped Fiber Ring Laser Using Few-Layer Black Phosphorus As A Saturable Absorber. IEEE Journal Of Selected Topics In Quantum Electronics, 23 (1). p. 1100205. ISSN 1077-260X

Ho, Soonmin and Anand, T. Joseph Sahaya (2015) A Review Of Chalcogenide Thin Films For Solar Cell Applications. Indian Journal Of Science And Technology (INDJST), 8 (12). pp. 1-6. ISSN 0974-6846

Hoo, Jian Ea and Lim, Kim Chuan (2016) Accuracy And Error Study Of Horizontal And Vertical Measurements With Single View Metrology For Road Surveying. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7872-7876. ISSN 1819-6608

Hussein, Nur Izan Syahriah and Rasidi, Mohd Kamarul Shaufi and Ayof, Mohd Nizam (2015) Experimental Methods For NICRBSI-WC Cladding On Gray Cast Iron Trim Cutter Die. APPLIED MECHANICS AND MATERIALS, 761. pp. 298-302. ISSN -

Hussin, Mohamed Saiful Firdaus and Mohd Yassim, Halyani and Zainon, Maslan and Ahmad, Emy Zairah and Idris, Norain (2018) Modelling And Simulation Of A Wind Turbine With Doubly Fed Induction Generator In Full Load Operation. ARPN Journal Of Engineering And Applied Sciences, 13 (1). pp. 57-63. ISSN 1819-6608

Huzainirah, Ismail and Fazlli, Patkar and Auzani, Jidin and Sundram, Ramahlingam and Muhd Khairi, Abd Rahim and Yusnida, Ahmad Tarmizi and Atikah, Razi (2016) Direct Torque Control Of Induction Machine Using 3-Level Neutral Point Clamped Inverter. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 571-576. ISSN 978-146739572-4

Ibrahim, Mohamad Amran and Mohamad, Effendi and Arzmi, Muhammad Hazwan and A Rahman, Muhamad Arfauz and Saptari, Adi and Shibghatullah, Abdul Samad and Sulaiman, Mohd Amri and Md Ali, Mohd Amran (2015) Enhancing efficiency of die exchange process through single minute of exchanging die at a textile manufacturing company in Malaysia. Journal of Applied Sciences. pp. 456-464. ISSN 1812-5654

Ibrahim, Khairul Anwar and Au, Mau Teng and Gan, Chin Kim and Tang, Jun Huat (2017) System Wide MV Distribution Network Technical Losses Estimation Based On Reference Feeder And Energy Flow Model. International Journal Of Electrical Power And Energy Systems, 93. pp. 440-450. ISSN 0142-0615

Ibrahim, Zulkifilie and Abu Hasim, Ahmad Shukri and Talib, Md Hairul Nizam and Mat Lazi, Jurifa and Mat Isa, Siti Noormiza and Mstafa, Raihana (2013) Performance Investigation Of Photovoltaic Grid Connection For Shunt Active Power Filter With Different PWM Generation. Journal of Theoretical and Applied Information Technology, 57 (2). pp. 305-312. ISSN 1992-8645

Ibrahim, Zulkifilie and Hossain, Md. Liton and Bugis, Ismadi and Mat Lazi, Jurifa and Mohd Yaakop, Nurazlin (2014) Comparative analysis of PWM techniques for three level diode clamped voltage source inverter. International Journal Of Power Electronics And Drive System (IJPEDS), 5 (1). pp. 15-23. ISSN 2088-8694

Ibrahim, Zulkifilie and Hossain, Md. Liton and Bugis, Ismadi and Nik Mahadi, Nik Munaji and Abu Hasim, Ahmad Shukri (2014) Simulation investigation of SPWM, THIPWM And SVPWM techniques for three phase voltage source inverter. International Journal Of Power Electronics And Drive System (IJPEDS), 4 (2). pp. 223-232. ISSN 2088-8694

Ibrahim, Zulkifilie and Mohd Yaakop, Nurazlin and Ahmad, Fauzi and Sulaiman , Marizan and Jusoff, Kamaruzaman and Jano, Zanariah and Linda , Khoo Mei Sui and Abu Hasim, Ahmad Shukri and Mat Isa, Siti Noormiza (2011) Improved Direct Torque Control Load Torque Estimator With The Influence Of Steering Angle For Dual Induction Motors Electric Vehicle Traction Drive System. World Applied Sciences Journal, 21 (-). pp. 11-22. ISSN 1818-4952

Ibrahim, Zulkifilie and Mohd Yaakop, Nurazlin and Sulaiman , Marizan and Mat Lazi, Jurifa and Abu Hasim, Ahmad Shukri and Patakor, Fizatul Aini (2012) Electric Differential With Svpwm Direct Torque Control Using Five-Leg Inverter For Electric Vehicles. Journal of Theoretical and Applied Information Technology, 46 (2). pp. 599-609. ISSN 1992-8645

Idris, Fakrulradzi and Hashim, Norlezah and Kadmin, Ahmad Fauzan and Lee, Boon Yee (2019) Intelligent Fire Detection And Alert System Using LabVIEW. International Journal Of Electrical And Computer Engineering (IJECE), 9 (3). pp. 1842-1849. ISSN 2088-8708

Idris, Norain and Zakaria, Muhammad Zulfattah and Ahmad, Emy Zairah and Mohd Yassim, Halyani and Hussin, Mohamed Saiful Firdaus (2015) Coding template of sensorless sun tracking using azimuth-elevation mode. Jurnal Teknologi, 76 (5). pp. 85-88. ISSN 0127-9696

Ifayefunmi, Olawale (2014) A survey of buckling of conical shells subjected to axial compression and external pressure. Journal of Engineering Science and Technology Review , 7 (2). pp. 182-189. ISSN 1791-2377

Ilyana, Abdullah and Wan Hasrulnizzam, Wan Mahmood and Muhammad Hafidz Fazli , Md Fauadi and Mohd Nizam , Ab Rahman and Fathiyah, Ahmad Jali (2015) Sustainability in Malaysian palm oil: a review on manufacturing perspective. Polish Journal of Environmental Studies, 24 (4). pp. 1463-1475. ISSN 1230-1485

Imran Syakir, Mohamad and Mohd Haizal , Mohd Husin and Safarudin Gazali , Herawan and Muhammad Zahir, Hassan (2009) Development of tin (IV) oxide based catalyst for carbon monoxide emission control. Journal of Mechanical Engineering and Technology, 1 (1). pp. 15-24. ISSN 2180 – 1053

Imran Syakir, Mohamad and S. B., Abdul Hamid and W. M. , Chin and K. H., Yau and A., Samsuri (2011) Nanofluid-based Nanocarbons An Investigation of Thermal Conductivity Performance. Journal of Mechanical Engineering and Technology, 3 (1). pp. 79-87. ISSN 2180 – 1053

Indra, Win Adiyansyah and Hamid, Mohd Saad and Mohd Yusof, Norfadzlia and Jayraman, Nishanthinidevi and Rusnandi, Herdy (2019) Frequency Reuse Optimization For OFDMA Network. Journal Of Engineering And Applied Sciences, 14 (4). pp. 1219-1225. ISSN 1816-949X

Indra, Win Adiyansyah and Sukumaran, Saravanan and Mohd Annuar, Khalil Azha and -, Irianto (2019) Analysis Of Handover Planning In Wideband Code Division Multiple Access (W–CDMA). Journal Of Engineering And Applied Sciences, 14 (3). pp. 823-830. ISSN 1816-949X

Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Salleh, Mohd Shukor and Salleh, Mohd Rizal and Mohamad, Noraiham and Raja Abdullah, Raja Izamshah and Md Ali, Mohd Amran (2018) Cleaner Production Implementation In An E-Waste Recovery Plant By Using The Value Stream Mapping. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 55-67. ISSN 1985-3157 (Unpublished)

Ishak, Nazila and Waini, Iskandar and Mohamed, Muhammad Khairul Anuar and Rosli, Norhayati and Salleh, Mohd Zuki (2017) Numerical Solution On MHD Flow And Heat Transfer For The Upper-Convected Maxwell Fluid Over A Stretching/Shrinking Sheet. Jurnal Karya Asli Lorekan Ahli Matematik, 10 (1). pp. 1-13. ISSN 1985-5222

Ismail, Ahmad Yusuf and Mat Nuri @ Md Din, Nur Rashid and Ahmad Mansor, Mazlan and Shukri, Muhamad Farid Anwar and Afiq, Mohamad Amirul (2015) Study On The Road Transmitted Vibration Of A Mountain Bicycle. Jurnal Teknologi, 77 (21). pp. 27-31. ISSN 0127-9696

Ismail, Kamariah and Wan Omar, Wan Zaidi and Abdul Majid, Izaidin (2010) Do the charecteristics of technology lead to university patents being unexploited? Jurnal Teknologi, UTM, 52 (1). pp. 105-128. ISSN 2289-6996

Ismail, Mohd Khairy and Awang Md Isa, Azmi and Johal, Mohammad Syahrir (2015) Review Of Radio Resource Management For IMT-Advanced System. Jurnal Teknologi , 72 (4). pp. 113-119. ISSN 2180-3722

Ismail, Mohd Khairy and Awang Md Isa, Azmi and Johal, Mohammad Syahrir and Mohd Zin, Mohd Shahril Izuan (2015) Current Developments In Lte/Lte-Advanced : Adaptive-Proportional Fair Scheduling In Lte. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 7 (1). pp. 103-108. ISSN 2180-1843

Ismail, Mohd Muzafar and Janudin, Nur Hazwani and Zakaria, Zahriladha and Othman, Mohd Azlishah (2014) A Computational Presentation Of Bioelectromagnetic Applications Using Numerical Method Approaches. Journal Of Advances In Information Technology, 5 (1). pp. 31-36. ISSN 1798-2340

Ismail, Mohd Muzafar and Othman, Mohd Azlishah and Sulaiman, Hamzah Asyrani and Meor Said, Maizatul Alice and Misran, Mohamad Harris and Ramlee, Ridza Azri and Sinnappa, Mohan and Zakaria, Zahriladha and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Osman, Khairuddin and Sulaiman, Siti Fatimah and Jaafar, Hazriq Izzuan and Jusoff, Kamaruzaman and Nordin, Nur Anis and Othman, Mohd Hafiz and Saealal, Muhammad Salihin and Adam, Asrul and Amer, Hafizah and Zainal Abidin, Amar Faiz and Khalid, Nurul Syahirah and Tunnur, Masturah and Abdul Majid, Masmaria and Suhaimi, Shadia (2013) Route Planning Analysis In Holes Drilling Process Using Magnetic Optimization Algorithm For Electronic Manufacturing Sector. World Applied Sciences Journal 21(Special Issue Of Engineering And Technology), 21. pp. 91-97. ISSN 1818-4952

Ismail, Mohd Muzafar and Othman, Mohd Azlishah and Zakaria, Zahriladha and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Ramlee, Ridza Azri and Meor Said, Maizatul Alice and Abas, Norafizah and Zainuddin, Muhammad Noorazlan Shah and Abdul Rahim, Razilah and Mohamed Aminuddin, Mai Mariam and Idris, Muhammad Idzdihar (2014) Bending Waveguide Modeling For Light Trapping Into Optical Fiber. Advanced Science Letters, 20 (2). pp. 412-417. ISSN 1936-6612

Jaafar, Anuar and Mad Lazim, Muzafirah and Hashim, Nik Mohd Zarifie and Salleh, Azahari and Ja'afar, Abd Shukur (2014) Division Algorithm Design Using Field Programmable Gate Array. International Journal for Advance Research in Engineering and Technology, 2 (VII). pp. 95-104. ISSN 2320-6802

Jaafar, Hazriq Izzuan and Syed Hussien, Sharifah Yuslinda and Ghazali, Rozaimi and Mohamed, Zaharuddin and Jamian, Jasrul Jamani and Mohd Aras, Mohd Shahrieel and Mohd Nasir, Mohamad Na'im and Sulaiman , Mohd Fairuz (2014) Analysis Of Optimal Motion Performance For Underactuated Gantry Crane System Using MOPSO With Linear Weight Summation Approach. Journal of Engineering and Technology, 5 (2). pp. 39-49. ISSN 2180-3811

Jaafar, Hazriq Izzuan and Mohamed, Zaharuddin and Shamsudin, Mohamad Amir and Mohd Subha, Nurul Adilla and Ramli, Liyana and Abdullahi, Muhammad Auwalu (2019) Model Reference Command Shaping For Vibration Control Of Multimode Flexible Systems With Application To A Double-Pendulum Overhead Crane. Mechanical Systems And Signal Processing, 115. pp. 677-695. ISSN 0888-3270

Jabar, Juhaini and Othman, Norfaridatul Akmaliah and Idris, Mohd Asmadi (2011) Enhancing Organizational Performance Through Strategic Technology Alliances: A Study on Malaysian Manufacturers. International Journal of Innovation, Management and Technology, 2 (6). pp. 506-511. ISSN 2010-0248

Jalaputhra, Dewakumari and Hashim, Nik Mohd Zarifie and Ibrahim, Mohd Izhan and Ja'afar, Abd Shukur and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Application Of Digital Signal Processing In Echo Cancellation : A Survey. International Journal of Science and Engineering Applications , 3 (5). pp. 150-153. ISSN 2319-7560

Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Chong, Chee Soon and Zohedi, Fauzal Naim (2017) Robust Controller Design With Particle Swarm Optimization For Nonlinear Prosthetic Hand System. International Journal Of Mechanical Engineering And Robotics Research, 6 (5). pp. 406-412. ISSN 2278-0149

Jali, Mohd Hafiz and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Mustafa, Na Eisyah Sarah and Jaafar, Hazriq Izzuan and Sarkawi, Hafez (2015) System Identification Modeling Of Arm Rehabilitation Devices. Journal of Theoretical and Applied Information Technology, 81 (3). pp. 547-551. ISSN 1992-8645

Jali, Mohd Hafiz and Alias , Khamis and Ghazali, Rozaimi and Ahmad Izzuddin, Tarmizi and Jaafar, Hazriq Izzuan (2015) Development Of Prosthethic Hand Hardware And Its Control System. International Journal of Soft Computing and Engineering (IJSCE), 5 (5). pp. 28-31. ISSN 2231-2307

Jali, Mohd Hafiz and Hamdani, Muhammad Faris and Zohedi, Fauzal Naim and Ghazali, Rozaimi (2017) System Identification And Fuzzy Logic Controller Design For Prosthetic Hand System. Journal Of Engineering Science And Technology, 12. pp. 52-63. ISSN 1823-4690

Jali, Mohd Hafiz and Mustafa, Na Eisyah Sarah and Ahmad Izzuddin, Tarmizi and Ghazali, Rozaimi and Jaafar, Hazriq Izzuan (2015) ANFIS-PID Controller For Arm Rehabilitation Device. International Journal of Engineering and Technology (IJET), 7 (5). pp. 1589-1597. ISSN 0975-4024

Jamaluddin, Muhammad Herman and Chong, Siong Seng and Shukor, Ahmad Zaki and Ali @ Ibrahim, Fariz and Miskon, Muhammad Fahmi and Mohd Aras, Mohd Shahrieel and Md Ghazaly, Mariam and Ranom, Rahifa (2015) The Effectiveness Of Fish Length Measurement System Using Non-Contact Measuring Approach. Jurnal Teknologi, 77 (20). pp. 67-74. ISSN 0127-9696

Jamaluddin, Muhammad Herman and Shukor, Ahmad Zaki and Miskon, Muhammad Fahmi and Ali @ Ibrahim, Fariz and Redzuan, Muhammad Qamarul Arifin (2016) An Analysis Of Sensor Placement For Vehicle’s Blind Spot Detection And Warning System. Journal of Telecommunication, Electronic and Computer Engineering, 8 (7). pp. 101-106. ISSN 2180-1843

Jamaludin, Irma Wani and Abdul Wahab, Norhaliza (2017) Recursive Subspace Identification Algorithm Using The Propagator Based Method. Indonesian Journal Of Electrical Engineering And Computer Science, 6 (1). pp. 172-179. ISSN 2502-4752

Jamaludin, Zamberi and Fu @ Hu-Jingwei, Zinvi and Bani Hashim, Ahmad Yusairi and Mohamad, Imran Syakir (2015) EMG recording of wrist gestures under non-ideal electrode placement for machine control in a manufacturing environment. Jurnal Teknologi , 77 (21). pp. 41-49. ISSN 2180-3722

Jamaludin, Zamberi and Huong, Yu Chung and Abdullah, Lokman (2017) Radio Frequency Identification Based System Design For Logistics Application. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 17-20. ISSN 2180-1843

Jamaludin, Zamberi and Huong , Chung Yu and Abdullah, Lokman and Nordin, Mohd Hisham and Abdullah, M. F. and Haron, R. and Jalal, K. B.A. (2018) Automated Tracking System Using RFID For Sustainable Management Of Material Handling In An Automobile Parts Manufacturer. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 35-40. ISSN 2180-1843

Jamil, Nur Hazirah and Ali, Nadhirah and Othman, Mohd Azlishah and Abd Aziz, Mohamad Zoinol Abidin and Sulaiman, Hamzah Asyrani (2015) An Analysis Of D Band Schottky DIODE For Millimeter Wave Application. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 718-722. ISSN 1819-6608

Jamri , Mohd Saifuzam and Anuar , Mohamed Kassim and Mohd Ruzaini, Hashim (2013) A Voltage Mode Control Maximum Power Point Tracking for Stand-Alone Photovoltaic System. Applied Mechanics and Materials , (Volum. pp. 503-507. ISSN 1662-7482

Jano, Zanariah and Janor, Hawati and Elangsegaran, Rajendraan and Khamis, Noorli and Md Saad, Mohd Shamsuri (2012) Internet banking: Analysing encouragement and impediment factors among academicians. International Journal of Computer Networks and Wireless Communication, 2 (3). pp. 335-341. ISSN 2250-3501 (Submitted)

Jaya Kumar, Yogan (2012) Automatic Multi Document Summarization Approaches. Journal of Computer Science, 8 (1). pp. 133-140. ISSN 1549-3636

Jaya Kumar, Yogan (2012) Cross-document Structural Relationship Identification Using Supervised Machine Learning. Applied Soft Computing, 12 (10). pp. 3124-3131. ISSN 1568-4946

Jaya Kumar, Yogan (2013) Using SVMs for Classification of Cross-Document Relationships. Pertanika Journal of Science & Technology, 21 (1). pp. 239-246. ISSN 0128-7680

Jaya Kumar, Yogan and Goh, Ong Sing and Basiron, Halizah and Ngo, Hea Choon and Suppiah, Puspalata C (2016) A review on automatic text summarization approaches. Journal Of Computer Science, 12. pp. 178-190. ISSN 1552-6607

Jaya Kumar, Yogan and Salim, Naomie and Abuobieda, Albaraa and Ameer Tawfik, Albaham (2014) Multi document summarization based on news components using fuzzy cross-document relations. Applied Soft Computing, 21. pp. 265-279. ISSN 1568-4946

Jayaganasan, Narayanasamy and Lau, Kok Tee and Muhammad Zaimi, Zainal Abidin (2016) Transistor Package’s Boron Nitride Film Microstructure And Roughness: Effect Of EPD Suspensions’ pH And Binder. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 8 (2). pp. 99-104. ISSN 2180-1843

Jidin, Aiman Zakwan and Lim, Siau Li and Kadmin, Ahmad Fauzan (2017) Implementation Of Algorithm For Vehicle Anti-Collision Alert System In FPGA. International Journal of Electrical and Computer Engineering (IJECE), 7 (2). pp. 775-783. ISSN 2088-8708

Jidin, Aiman Zakwan and Mahzan, Irna Nadira and Hassim, Nurulhalim and Kadmin, Ahmad Fauzan (2018) Low-Cost And Portable Interactive Sinusoidal Digital Signal Generator By Using FPGA. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1-2). pp. 19-24. ISSN 2180-1843

Jiim, Anthony Bruster and Zakaria, Zahriladha and Mutalib, Mohamad Ariffin and Saifullah, Nasrullah and Hashim, Norlezah and Ruslan, Eliyana (2016) Tunable notch response for ultra wide-band bandpass filter. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 492-497. ISSN 978-147998252-3

Jimit, Roy Hanson and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Dhar Malingam, Sivakumar (2018) Tensile and fatigue behaviour of glass fibre reinforced polyester composites. International Journal Of Engineering And Technology, 7 (3.17). pp. 25-27. ISSN 2227-524X

Johar, F M and Azmin, F A and Shibghatullah, A S and Suaidi, M K and Ahmad, B H and Aziz, M Z A Abd and Salleh, S N and Shukor, M Md (2014) Application of Genetic Algorithm to the Design Optimization of Complex Energy Saving Glass Coating Structure. Journal of Physics: Conference Series, 495 (1). 012031. ISSN 1742-6596

Johari, Dalina and Ismail, Mohd Muzafar and Cooray, Vernon and Rahman, Mahbubur and Hettiarachchi, Pasan (2016) Characteristics of preliminary breakdown pulses in positive ground flashes during summer thunderstorms in Sweden. Atmosphere, 7 (3). pp. 1-18. ISSN 2073-4433

Jong, Siat Ling and Riva, Carlo G. and D'Amico, Michele and Lam, Hong Yin and Mohamed Yunus, Mawarni and Din, Jafri (2018) Performance of synthetic storm technique in estimating fade dynamics in equatorial Malaysia. International Journal of Satellite Communications and Networking, 36 (5). pp. 416-426. ISSN 1542-0973

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Habban, Mohd Faiz (2017) An Accurate Classification Method Of Harmonic Signals In Power Distribution System By Utilising S-Transform. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (11). pp. 1-8. ISSN 1693-6930

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Yusoff, Mohd Rahimi (2017) A Fast Localization Of Multiple Harmonic Sources For Rectifier Loads By Utilizing Periodogram. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (1). pp. 1001-1008. ISSN 1693-6930

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Yusoff, Mohd Rahimi (2017) A Utilisation Of Improved Gabor Transform For Harmonic Signals Detection And Classification Analysis. International Journal Of Electrical And Computer Engineering (ijece), 7 (1). pp. 31-39. ISSN 2088-8708

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Manap, Mustafa and Yusoff, Mohd Rahimi and Habban, Mohd Faiz (2017) An Improved Detection And Classification Technique Of Harmonic Signals In Power Distribution By Utilizing Spectrogram. International Journal Of Electrical And Computer Engineering (Ijece), 7 (1). pp. 31-39. ISSN 2088-8708

Jopri, Mohd Hatta and Abdullah, Abdul Rahim and Nabilah , Mat Kassim and Manap, Mustafa and Ngatiman, Nor Azazi and Yusoff, Mohd Rahimi (2016) Localization Of Multiple Harmonic Sources For Inverter Loads Utilizing Periodogram. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 87-91. ISSN 2180-1843

Juhaini, Jabar (2012) Strategic technology alliances, technology transfer and the performance of Malaysian manufacturer. Journal of Engineering and Technology. pp. 69-98. ISSN 2180-3811

Jumaidin, Ridhwan and Sapuan, S. M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2016) Effect of seaweed on physical properties of thermoplastic sugar palm starch/agar composites. Journal of Mechanical Engineering and Sciences (JMES). pp. 2214-2225. ISSN 2289-4659

Jumaidin, Ridhwan and Sapuan, S. M. and Jawaid, Mohamad and Ishak, M. R. and Sahari, Japar (2017) Characteristics of Eucheuma cottonii waste from East Malaysia: physical, thermal and chemical composition. European Journal of Phycology, 52 (2). pp. 200-207. ISSN 0967-0262

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Japar, Sahari (2017) Thermal, mechanical, and physical properties of seaweed/sugar palm fibre reinforced thermoplastic sugar palm Starch/Agar hybrid composites. International Journal of Biological Macromolecules. pp. 606-615. ISSN 0141-8130

Jumaidin, Ridhwan and Sapuan, S.M and Jawaid, Mohamad and Ishak, M. R and Sahari, Japar (2017) Effect of Agar on Flexural, Impact, and Thermogravimetric Properties of Thermo- plastic Sugar Palm Starch. Current Organic Synthesis. pp. 200-205. ISSN 1570-1794

Jurifa, Mat Lazi and Zulkifilie, Ibrahim and Marizan, Sulaiman and Azziddin, Mohamad Razali and Norazelina, Kamisman (2016) Independent Control For Dual-PMSM Drives Using Five-Leg Inverter. 2015 IEEE Conference On Energy Conversion, CENCON 2015. pp. 143-148. ISSN 978-147998598-2

K., Rajammal and Sivakumar, Dhar Malingam and Navaneethan, Duraisamy and K., Ramesh and S., Ramesh (2016) Effect Of Sintering Temperature On Structural Properties Of LiMnPO4 Cathode Materials Obtained By Sol–Gel Method. Journal Of Sol-Gel Science And Technology, 79. pp. 1-9. ISSN 0928-0707

Kadir, Abdul (2014) A Model of Plant Identification System Using GLCM, Lacunarity and Shen Features. Research Journal of Pharmaceutical, Biological and Chemical Sciences, 5 (2). pp. 1-10. ISSN 0975-8585

Kadir, N. A. A. and Ismail, E. I. and Abdul Latiff, Anas and Ahmad, H. and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Transition Metal Dichalcogenides (WS2 And MoS2) Saturable Absorbers For Mode-Locked Erbium-Doped Fiber Lasers. Chinese Physics Letters, 34 (1). 014202-1. ISSN 0256-307X

Kamarudin, Muhammad Nizam and Husain, Abdul Rashid and Ahmad, Mohamad Noh and Mohamed, Zaharuddin (2015) Model And Analysis Of Wind Speed Profile Using Artificial Neural Network - Feasibility Study In Peninsular Malaysia. Jurnal Teknologi, 74 (1). pp. 77-81. ISSN 0127-9696

Kamarudin, Muhammad Nizam and Husain, Abdul Rashid and Ahmad, Mohamad Noh and Mohamed, Zaharuddin (2015) A Universal Formula For Asymptotic Stabilization With Bounded Controls. International Journal of Electrical and Computer Engineering, 5 (1). pp. 111-118. ISSN 2010-3948

Kamarudin, Muhammad Nizam and Md Rozali, Sahazati and Husain, A.Rashid (2013) Observer-Based Output Feedback Control With Linear Quadratic Performance. Procedia Engineering , 53 (-). pp. 233-240. ISSN 1877-7058

Kamarudin, Muhammad Nizam and Md. Rozali, Sahazati and Hairi, Mohd Hendra and Hanaffi, Farhan and Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi (2018) Realization Of Real-Time Hardware-In-The-Loop For A Liquid Level With Open-Loop Ziegler Nichols Technique. International Journal Of Electrical Engineering And Applied Sciences (IJEEAS), 1 (2). pp. 47-51. ISSN 2600-7495

Kamarudin, Muhammad Nizam and Mohd Shaharudin, Nabilah and Hairi, Mohd Hendra and Rizman, Zairi Ismael (2018) Achieving Power System Stability For Two Area Hydro Power System Via LQR Techniques. International Journal Of Engineering & Technology, 7. pp. 396-402. ISSN 2227-524X

Kamarul Ariffin, Abd Rashid and Mohd Nor, Husain and Muhammad Majdi, Saad and Mohamad Zoinol Abidin, Abd Aziz and Nornikman, Hassan (2016) Compact Circular Polarized Antenna Design With H-Shaped Slots And Stair Notches For Wireless LAN Application Of 2.4 GHz. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 13-17. ISSN 2180-1843

Kamarul Ariffin, Zakaria and Ad Suhadak, Fadrah Hanim and Mohd Razalli, Ammer Ezhar and Kassim, M.S (2017) Fatigue Damage Analysis Of Automobile Steering Knuckle Using Finite Element Analysis. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4225-4228. ISSN 1819-6608

Kamat, Seri Rahayu and Md Zula, Nur Emelia Natasha and Rayme, Nur Syafiqah and Shamsuddin, Syamimi and Husain, K. (2017) The Ergonomics Body Posture On Repetitive And Heavy Lifting Activities Of Workers In Aerospace Manufacturing Warehouse. IOP Conference Series: Materials Science And Engineering, 210 (1). pp. 1-12. ISSN 1757-8981

Kamat, Seri Rahayu and Mahmood, Noor Shakir and Ajmi, Ahmed Ali (2016) Review And Establishing Framework Model To An Adoption Of ISO 50001 Energy Management System In Power Stations. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). pp. 67-78. ISSN 1985-3157

Kamis, Zalina and Ab Ghani, Mohd Ruddin and Kamarudin, Muhammad Nizam and Mohd Shah, Hairol Nizam and Jano, Zanariah (2019) A Review On SVC Control For Power System Stability With And Without Auxiliary Controller. Bulletin Of Electrical Engineering And Informatics, 8 (3). pp. 761-768. ISSN 2302-9285

Karis, Mohd Safirin and Abdul Razif, Nur Rafiqah and Mohd Ali, Nursabillilah and Rosli, M. Asyraf and Mohd Aras, Mohd Shahrieel and Md Ghazaly, Mariam (2016) Local Binary Pattern (LBP) With Application To Variant Object Detection: A Survey And Method. 2016 IEEE 12TH INTERNATIONAL COLLOQUIUM ON SIGNAL PROCESSING & ITS APPLICATIONS (CSPA2016), - (-). pp. 221-226. ISSN -

Karis, Mohd Safirin and Mohd Saad, Wira Hidayat and Mohd Ali, Nursabillilah and Khor, Chin We and Abdul Razif, Nur Rafiqah (2016) Fruit Sorting Based On Machine Vision Technique. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (4). pp. 31-35. ISSN 2180-1843

Kasim, Ayu Natasya and Selamat, Mohd Zulkefli and Mohd Daud, Mohd Ahadlin and Yaakob, Mohd Yuhazri and Putra, Azma and Dhar Malingam, Sivakumar (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2229-8649

Kasim, Mohd Shahir and Mohd Shahrim, Mohammad Shah All Hafiz and W. Mohamad, W Noor Fatihah and Mohd Zainurin, Nurul Shafiqah and Othman, Intan Sharhida and Raja Abdullah, Raja Izamshah and Mat Harttar, Maziati Akmal and Mohamed, S.B. and Nawi, M.A.M. (2019) The Effects Of Dry And Chilled Air On Tool Wear Behavior During Face Milling Of Inconel 718. Jurnal Tribologi, 21. pp. 47-62. ISSN 2289-7232

Kasim, Rizanaliah and Abdullah, Abdul Rahim and Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Ramli, Mohd Zulkifli (2016) Nickel-Cadmium Battery Analysis Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3975-3979. ISSN 1819-6608

Kasim, Rizanaliah and Abdullah, Abdul Rahim and Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Ramli, Mohd Zulkifli (2016) Nickel-Cadmium Battery Analysis Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3975-3979. ISSN 1819-6608

Kasno, Mohammad `Afif and Mohd Aras, Mohd Shahrieel and Yeoh, Eik Keong and Abdul Azis, Fadilah and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2016) Design Analysis Of Remotely Amphibian Vehicle (RAV) – Underwater Drone. Jurnal Teknologi, 76 (1). pp. 1-5. ISSN 0127-9696

Kasrul, Abdul Karim and Md Nazri , Othman and Auzani , Jidin and Mohd Zulkifli, Ramli (2014) Development Of Integrated Monitoring System For Re-Electric Vehicle. Jurnal Teknologi, 71. pp. 99-104. ISSN 2180–3722 (Submitted)

Kassim, Dg Hafizah and Putra, Azma and Mohd Nor, Mohd Jailani and Hamzah, Ain Nur Haznida (2017) Preliminary Study Of Acoustical Treatment In A Scaled Model Mosque. International Review Of Mechanical Engineering (IREME), 11 (4). pp. 222-227. ISSN 1970-8734

Kazuki, Tange and Shinfuku, Nomura and Shinobu, Mukasa and Hiromichi, Toyota and Syahrial, Fadhli (2016) Effect Of Pretreatment By Sulfuric Acid On Cellulose Decomposition Using The In-Liquid Plasma Method. Journal Of The Japan Institute Of Energy, 95 (12). pp. 1105-1109. ISSN 0916-8753

Khairil Ezwan, Kaharudin and Fauziyah, Salehuddin and Anis Suhaila, Mohd Zain and Muhammad Nazirul Ifwat, Abd Aziz and I., Ahmad (2016) Application Of Taguchi Method With The Interaction Test For Lower DIBL IN WSix/TiO2 Channel Vertical Double Gate NMOS. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7093-7103. ISSN 1819-6608

Khairuddin, Osman and Ahmad 'Athif , Mohd Faudzi and Mohd Fua'ad , Rahmat and Koichi, Suzumori (2014) System Identification And Embedded Controller Design For Pneumatic Actuator With Stiffness Characteristic. Mathematical Problems in Engineering, 2014. pp. 1-13. ISSN 1563-5147

Khairul Anwar, Ibrahim and Mau, Teng Au and Gan, Chin Kim (2016) Generic Characteristic Of Medium Voltage Reference Network For The Malaysian Power Distribution System. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 204-209. ISSN 978-146739572-4

Khairul Azha , A. Aziz and Abdul, Kadir and Rostam Affendi, Hamzah and Amat Amir , Basari (2015) Product Identification Using Image Processing And Radial Basis Function Neural Networks. Applied Mechanics and Materials, 761. pp. 120-124. ISSN 1662-7482

Khalid, Syazana Itqan and Ahmad Radzi, Syafeeza and Mohd Saad, Norhashimah and Abdul Hamid, Norihan and Mohd Saad, Wira Hidayat (2016) A Review On Finger-Vein Biometrics Identification Approaches. Indian Journal Of Science And Technology (INDJST), 9 (32). pp. 1-8. ISSN 0974-6846

Khamis, Alias and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Mohd Aras, Mohd Shahrieel and Ab Rashid, Mohd Zamzuri and Dahlan, Nurfaezatul Aqma (2017) Modeling and analysis microturbine and battery storage system microgrid system based on green energy. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-7). pp. 89-94. ISSN 2180-1843

Khamis, Alias and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Mohd Aras, Mohd Shahrieel and Zabide, Muhamad Aswad and Sutikno, Tole (2018) Control Strategy For Distributed Integration Of Photovoltaic And Battery Energy Storage System In Micro-Grids. TELKOMNIKA (Telecommunication, Computing, Electronics And Control), 16 (5). pp. 2415-2427. ISSN 1693-6930

Khamis, Alias and Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Ab Ghani, Mohd Ruddin and Abdul Rahim, Mohd Nazarul Affan (2016) Analysis Of Microturbine And Battery Storage System In Grid-Connected And Off-Grid Operations. International Review of Automatic Control (IREACO), 9. pp. 269-278. ISSN 1974-6067

Khamis, Aziah and Mohd Aras, Mohd Shahrieel and Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Mohd Zambri, Mohd Khairi and Ahmad, Azhar and Nor Rahim, Mohd Akmal Hakim (2017) Design And Analysis Of Diesel Generator With Battery Storage For Microgrid System. International Journal Of Advanced Engineering Research And Technology (IJAERT), 5 (3). pp. 26-32. ISSN 2348-8190

Khamis, Aziah and Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Ahmad, Azhar and Jaafar, Azri (2017) Analysis Of Wind With Battery Connected To Microgrid System. International Journal Of Advanced Engineering Research And Technology (IJAERT), 5 (3). pp. 40-45. ISSN 2348-8190

Khanfar, Khalid and Elzamly, Abed and Al-Ahmad, Walid and El-Qawasmeh, Eyas and Alsamara, Khalid and Abuleil, Saleem (2008) Managing software project risks with the chi-square (X2) technique. International Management Review, Vol.4 (2). pp. 18-29. ISSN 1551-6849

Khang, Adam Wong Yoon and Elias, Shamsul Jamel and Pusppanathan, Jaysuman and Zulkifli, Nadiatulhuda and Nasrul Helmei, Halim and Abdullah, Shapina (2019) Last mile mobile hybrid optical wireless access network routing enhancement. Bulletin Of Electrical Engineering And Informatics, 8 (1). pp. 188-195. ISSN 2089-3191

Khang, Adam Wong Yoon and Jamil Alsayaydeh, Jamil Abedalrahim and Indra, Win Adiyansyah and Pusppanathan, Jaysuman and Elias, Shamsul Jamel (2019) Taguchi based self-configure data rate optimization AODVUU routing parameters in MANET over optical network performances. International Journal Of Engineering And Advanced Technology (IJEAT), 8 (5). pp. 316-322. ISSN 2249-8958

Khyrina Airin Fariza, Abu Samah and Burairah, Hussin and Abd Samad, Hasan Basari (2015) Modification of dijkstra's algorithm for safest and shortest path during emergency evacuation. Applied Mathematical Sciences, 9 (31). 1531 - 1541. ISSN 1312-885X

Kyairul Azmi, Baharin and Hasimah, Abdul Rahman and Mohammad Yusri, Hassan and Gan, Chin Kim (2016) Short-Term Forecasting Of Solar Photovoltaic Output Power For Tropical Climate Using Ground-Based Measurement Data. Journal Of Renewable And Sustainable Energy, 8 (5). ISSN 1941-7012

Lago, Herwansyah and Zakaria, Zahriladha and Jamlos, Mohd Faizal and Soh, Ping Jack (2019) A Wideband Reconfigurable Folded Planar Dipole Using MEMS And Hybrid Polymeric Substrates. AEU - International Journal Of Electronics And Communications, 99. pp. 347-353. ISSN 1434-8411

Lau, Kok Tee and Kok, Hoi Ern and Ab Maulod, Hairul Effendy and Abdul Latiff, Nurizzatul Zahirah and Abdul Aziz, Aida Nazifa and Rosli, Nur Hazirah (2019) Effect Of Laminating Press’s Opening-Stacking Position On Adhesive Thickness In Coverlay/Adhesive/Flexible-Printed-Circuit Sheet. Journal Of Engineering Technology And Applied Physics, 1 (1). pp. 1-3. ISSN 2682-8383

Lau, Kok Tee and Kok, Swee Leong and Lau, Kok Tee (2018) Design, Fabrication And Characterization Of Piezoelectric P(Vdf-Trfe) Thick Film On Flexible Substrate For Energy Harvesting. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (1). pp. 63-68. ISSN 2180-1843

Lau, Kok Tee and Zurianee, Lokman Loganathan (2015) Effect Of HCl Concentration On The Phase And Microstructure Of TiO2 Film Synthesized By Low-Voltage Anodization Of Titanium. Advanced Materials Research, 1119. pp. 500-504. ISSN 1662-8985

Lau, Kok Tee and Zurianee, Lokman Loganathan and Roslan, Abd. Shukor (2015) Arc Vapour Deposition Of Iron Film During Magnetron Sputtering Of Ti Film: Effect Of Substrate’s Materials And Surface Roughness. International Journal of Electrochemical Science, 10 (7). pp. 5488-5497. ISSN 1452-3981

Lau , Kok Tee and Mohd Shahadan , Mohd Suan and M., Zaimi and Jeefferie , Abd Razak (2016) Microstructure And Phase Of Poly (Vinyliden Fluoride) Films By Electrophoretic Deposition:Effect Of Polymer Dispersion Stirring Conditions. Journal Of Advanced Manufactruring Technology, 10 (1). pp. 57-66. ISSN 1985-3157

Lee, Jun Wei and Ahmad Zaki, Shukor and Muhammad Herman, Jamaluddin (2016) Investigation On Standardization Of Modal Space By Ratio For MDOF Micro-Macro Bilateral Teleoperation Control System. Modern Applied Science, 10 (11). pp. 98-109. ISSN 1913-1844

Lee, Shing Chuan and Tamaldin, Noreffendy and Abdollah, Mohd Fadzli (2017) Tribological Performance Of Low Blend Decanter Cake Biodiesel. Industrial Lubrication And Tribology, 69 (3). pp. 425-432. ISSN 0036-8792

Lee , Jun Wei and Shukor, Ahmad Zaki and Jamaluddin, Muhammad Herman (2015) Workspace Control Of Two Link Planar Robot Using Micro-Box 2000. Jurnal Teknologi, 77 (20). pp. 9-18. ISSN 0127-9696

Liaw, Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah and Sutikno, Tole (2014) A Review Of Parabolic Dish-Stirling Engine System Based On Concentrating Solar Power. TELKOMNIKA: Telecommunication, Computing, Electronics and Control, 12 (4). pp. 1142-1152. ISSN 1693-6930

Liaw , Geok Pheng and Affandi, Rosnani and Ab Ghani, Mohd Ruddin and Gan, Chin Kim and Jano, Zanariah (2016) Study The Feasibility Of Parabolic Dish (Pd) From Several Prospective Criteri In Malaysia Environment. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3929-3937. ISSN 1819-6608

Liew, Pay Jun and Abdul Razak, Muhammad Raziman and Hussein, Nur Izan Syahriah and Ahsan, Qumrul (2016) Experimental Investigation Of Electrical Discharge Machining Using Dielectric Fluid With Surfactant And Different Carbon Additives. International Journal Of Applied Engineering Research, 11 (15). pp. 8507-8510. ISSN 0973-4562

Liew, Pay Jun and Mohd Hajazi, Aini Syahida and Shaaroni, Ainusyafiqah and Sulaiman, Mohd Amri and Raja Abdullah, Raja Izamshah (2018) Investigation Of Effects Of Carbon Nanofiber Nanofluid In Drilling Of AISI 304 Stainless Steel. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1 (2)). pp. 491-500. ISSN 1985-3157

Liew, Pay Jun and Zainal, Nurlishafiqa and Ahsan, Qumrul and Zhou, T. and Yan, J. (2018) Experimental Investigation Of RB-SiC Using Cu–CNF Composite Electrodes In Electrical Discharge Machining. The International Journal Of Advanced Manufacturing Technology, 98 (9-12). pp. 3019-3028. ISSN 0268-3768

Liew, Pay Jun and Hashim, Umira Syafika and Abd Rahman, Md Nizam (2017) Effect Of Chilled Air Coolant On Surface Roughness And Tool Wear When Machining 2205 Duplex Stainless Steel. Journal of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 61-68. ISSN 1985-3157

Liew, Pay Jun and Shaaroni, Ainusyafiqah and Abd Razak, Jeefferie and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2017) Optimization Of Cutting Condition In The Turning Of AISI D2 Steel By Using Carbon Nanofiber Nanofluid. International Journal of Applied Engineering Research, 12 (10). pp. 2243-2252. ISSN 0973-4562

Liew, Siaw Hong and Choo, Yun Huoy and Yin, Fen Low and Mohd Yusoh, Zeratul Izzah (2018) EEG-Based Biometric Authentication Modelling Using Incremental Fuzzy-Rough Nearest Neighbour Technique. IET Biometrics, 7 (2). pp. 145-152. ISSN 2047-4938

Liew, Weng Tack and Mohd Abid, Mohd Asyadi Azam and Raja Seman, Raja Noor Amalina (2017) Structural And Electronic Properties Of Transition-Metal Oxides Attached To A Single-Walled CNT As A Lithium-Ion Battery Electrode : A First-Principles Study. American Chemical Society, 121 (-). pp. 2636-2642. ISSN 2636−2642

Lim, Kim Chuan and Hoo, Jian Ea and Lee, Yin Hui (2016) Wi-Fi Sniffer Based Commuters Statistics Collection System For Reliable Bus Scheduling System. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7883-7887. ISSN 1819-6608

Lizawati, Salahuddin and Zuraini, Ismail and Wardah, Zainal Abidin (2016) A Systematic Literature Review On Safe Health Information Technology Use Behaviour. Jurnal Teknologi, 78 (4-3). pp. 1-7. ISSN 0127-9696

Loh, Ser Lee and Chong, Shin Horng and Foo, Jia En and Hee, Wai Keat and Hasim, Norhaslinda (2016) Fast Positioning Performance In Ball Screw Mechanism With Disturbance Observer. Jurnal Teknologi, 78. pp. 71-78. ISSN E-ISSN2180-3722

Loh, Ser Lee and Keek, Joe Siang and Chong, Shin Horng (2019) Comprehensive Development And Control Of A Path-Trackable Mecanum-Wheeled Robot. IEEE Access, 7. pp. 18368-18381. ISSN 2169-3536

Low, Pei Sing and Ramlan, Roszaidi and Muhammad, N.S and Ghani, H. A. (2016) Comparison Of Harmonic Balance And Multiple Scale Method On Degree Of Nonlinearity For Duffing Oscillator. ARPN JOURNAL OF ENGINEERING AND APPLIED SCIENCES, 11 (8). pp. 5314-5319. ISSN 1819-6608

Lubis, Abdul Munir Hidayat Syah and Ariwahjoedi, Bambang and Sudin, Mustafar (2015) Investigation On Oxidation And Thermal Stability Of Jatropha Oil. Jurnal Teknologi, 77 (21). pp. 79-83. ISSN 0127-9696

Lum, Yip Hing and Shaaban, Azizah and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz (2016) Slow release of urea encapsulated by starch PVA matrix. Key Engineering Materials, 707. pp. 28-31. ISSN 1662-9795

Lum, Yip Hing and Shaaban, Azizah and Mohamad, Noraiham and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad Yatim, Norazlina (2016) Boric acid modified starch polyvinyl alcohol matrix for slow release fertilizer. E-Polymers, 16 (2). pp. 151-158. ISSN 1618-7229

M., Zulkiflee and Asmai, Siti Azirah and N., Haniza and Ayop, Zakiah and Sahib@Sahibuddin, Shahrin (2011) Behavioral analysis on IPv4 malware on different platforms in IPv6 network environment. IEEE Conference on Open Systems (ICOS). pp. 74-79. ISSN -

M., Zulkiflee and Mohd Faizal Abdollah, Faizal M.A. and IOM, Fairuz and Abu, Nur Azman and Sahib@Sahibuddin, Shahrin (2011) Behavioral analysis on IPv4 malware in both IPv4 and IPv6 network environment. International Journal of Computer Science and Information Security (IJCSIS). pp. 10-15. ISSN 1947-5500

M., Zulkiflee and N., Haniza and Sahib, Shahrin and Abd. Ghani, Mohd Khanapi (2014) A framework of IPv6 network attack dataset construction by using testbed environment. International Review on Computers and Software (I.RE.CO.S.). pp. 1434-1441. ISSN 1828-6003

M., Zulkiflee and Yusof, Robiah and Abu, Nur Azman and Sahib, Shahrin (2012) Improvising intrusion detection for malware activities on dual-stack network environment. International Conference on Information Systems, Management and Evaluation (ICISME 2012), 6. pp. 537-542. ISSN -

M., Zulkiflee and Abdollah, M. F. and Othman, M. F. I. and Abu, Nur Azman and Sahib, S. (2011) Behavioral Analysis on IPv4 Malware in both IPv4 and IPv6 Network Environment. International Journal of Computer Science and Information Security. ISSN 1947-5500

M. Noh, Faridah Hanim and Hajime, Miyauchi and Yaakub, Muhamad Faizal (2015) Application Of Slantlet Transform Based Support Vector Machine For Power Quality Detection And Classification. Journal Of Power And Energy Engineering, 3 (4). pp. 215-223. ISSN 2327-588X

M. Yusoff, Z. and A. Aziz, M. A. and Razali, N. F. and Nordin, S. A. and Zainal Abidin, Amar Faiz and Zain, N. M. (2017) The Study Of Dynamic Response Using ARX Model In Extraction Process. Journal Of Fundamental And Applied Sciences, 9 (4S). pp. 145-159. ISSN 1112-9867

M.P. Azuwa, Azuwa and Ahmad, Rabiah and Sahib, Shahrin and Shamsuddin, Solahuddin (2012) Technical Security Metrics Model in Compliance with ISO/IEC 27001 Standard. The Society of Digital Information and Wireless Communication. ISSN 2305-0012

Mad Lazim, Muzafirah and Hashim, Nik Mohd Zarifie and Sulaiman Wong, Najibah and Salleh, Azahari (2014) A Study On Image Enhancement. International Journal of Emerging Technology & Research, 1 (6). pp. 67-73. ISSN 2347-6079

Mahamood, Mazlin Aida and Mohamad, Noraiham and Abd Razak, Jeefferie and Mohd Zain, Amirul Hakimi and Shueb, Mohammed Iqbal and Ab Maulod, Hairul Effendy (2017) Correlation Of Open Cell Structure With Properties Of Green Rubber Foam From Epoxidised Natural Rubber/Reclaimed Rubber Glove. Journal of Mechanical Engineering, S1 (1). pp. 113-122. ISSN 1823- 5514

Mahanum, Mohd Zamberi and Farid Nasir, Ani (2016) Biodiesel Production From High FFA Rubber Seed Oil Using Waste Cockles. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7782-7787. ISSN 1819-6608

Mahanum, Mohd Zamberi and Farid Nasir, Ani and Mohd Fadzli, Abdollah (2016) Heterogeneous Transesterification Of Rubber Seed Oil Biodiesel Production. Jurnal Teknologi, 78 (6-10). pp. 105-110. ISSN 0127-9696

Mahmud, Dayang Nor Fatin and Abdollah, Mohd Fadzli and Masripan, Nor Azmmi and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) Frictional Wear Stability Mechanisms Of An Activated Carbon Composite Derived From Palm Kernel By Phase Transformation Study. Industrial Lubrication And Tribology, 69 (6). pp. 945-951. ISSN 0036-8792

Mahyuddin, Mohamad Badrol Hisyam and Abdul Latiff, Anas and Mohd Rusdi, Muhammad Farid and Irawati, Ninik and Harun, Sulaiman Wadi (2017) Quantum Dot Cadmium Selenide As A Saturable Absorber For Q-Switched And Mode-Locked Double-Clad Ytterbium-Doped Fiber Lasers. Optics Communications, 397. pp. 147-152. ISSN 0030-4018

Maidin, Shajahan and Abd Latiff, Anisah (2015) Nasi Lemak Packaging: A Case Study Of Food Freshness And Design Flexibility. Journal of Advanced Manufacturing Technology (JAMT) , 9 (1). pp. 13-19. ISSN 1985-3157

Maidin, Shajahan and Abdul Aziz, Khairul Fahmi and Muhamad, Muhammad Kazimi and E. Pei (2015) Analysis of applying ultrasonic frequency on a desktop FDM nozzle. Journal of Applied Mechanics and Materials, 761 (-). pp. 329-333. ISSN 1660-9336

Maidin, Shajahan and Loo, Heoy Shin and Alkahari, Mohd Rizal and Samat, Khairul Fadzli and Yahaya, Saifudin Hafiz (2015) Bone Scaffold Geometrical Design And Material Selection By Using Analytical Hierarchy Process For Additive Manufacturing Process. Jurnal Teknologi, 77 (32). pp. 141-149. ISSN 0127-9696

Maidin, Shajahan and Wan Malek, Wan Nasuha (2014) Laptop Casing Aesthetic Improvement. Journal of Advanced Manufacturing Technology, 7. NA. ISSN 1985-3157

Main, Aspalilla and Zakaria, Nurul Azma and Yusof, Robiah (2014) Organisational Readiness Component To Develop Readiness Model Towards Smooth IPv6 Migration. Journal of Applied Science and Agriculture, 9 (11). pp. 9-14. ISSN 1816-9112

Maisarah, Abu and Maizatun, Muhamad and Hasnizom, Hassan and Zahriladha, Zakaria and Siti Adlina, Md Ali (2016) Proximity Coupled Antenna With Star Geometry Pattern AMC Ground Plane. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8822-8828. ISSN 1819-6608

Mamat, Normaisharah and Abdul Karim, Kasrul and Ibrahim, Zulkifilie and Ahmad Tarusan, Siti Azura and Mat Lazi , Jurifa and Yusup Lada, Musa (2014) Analysis Of A Bearingless Permanent Magnet Synchronous Motor. Science International-Lahore, 26. pp. 1639-1643. ISSN 1013-5316

Manap, Mustafa and Abdullah, Abdul Rahim and Saharuddin, Nur Zawani and Abidullah, Noor Athira and Ahmad, Nur Sumayyah and Bahari, Norhazilina (2016) Voltage source inverter switches faults analysis using s-transform. International Journal Of Electronics And Electrical Engineering, 4 (2). pp. 157-161. ISSN 2301-380X

Mansor, Nik Fakhri and Adnan, Ammar and Radin Umar, Radin Zaid and Samuel, Siby and Hamid, Malek (2017) Digital Eye Strain Evaluation Among Video Gamers With And Without Blue Light Monitor Filter. Human Factors And Ergonomics Journal, 2 (2). pp. 41-44. ISSN -

Mariam, Md Ghazaly and Teo, Ting Huan and Vivek, Regeev and Kartikesu, Vijayan and Chong, Shin Horng and Aliza, Che Amran and Zulkeflee, Abdullah and Mohd Amran, Md Ali (2016) Point-To-Point (PTP) Control Performances Of An Upper Limb Robotic Arm. Jurnal Teknologi, 78 (7). pp. 131-140. ISSN 0127-9696

Marizan, Sulaiman (2016) Study Of Voltage And Power Stability Margins Of Electrical Power System Using ANN. IET Digital Library / Conference, 1 (1). pp. 1-7. ISSN -

Marizan, Sulaiman and Ahmad Fateh, Mohamad Nor and Noor Ropidah, Bujal (2015) Voltage Instability Analysis On PV And QV Curves For Radial-Type And Mesh-Type Electrical Power Networks. International Review Of Electrical Engineering (IREE), 10 (1). pp. 109-118. ISSN 1827- 6660

Marizan, Sulaiman and Hayfaa, Mohammed Hussein and Rosli, Omar and Zulhisyam, Salleh (2016) Dynamic Stability Analysis Of Generator With Power System Stabilizers Using Matlab Simulink. Indonesian Journal Of Electrical Engineering And Computer Science, 2 (3). pp. 501-509. ISSN 2502-4752

Marzuki, Noor Munirah and Abdul Kadir, Tuty Asmawaty and Shibghatullah, Abdul Samad (2014) Halal barcode scanner prototype in android using client side processing with JSON technology. Science International. pp. 1751-1753. ISSN 1013-5316

Mas Haslinda, Mohamad and Aduwati, Sali and Nur S., Ibrahim and Fazirulhisyam, Hashim and Rosdiadee, Nordin (2016) Temporal Evaluation Of Secondary User Interference To Primary User In Cognitive Radio Networks. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 565-570. ISSN 978-146739572-4

Maslan, Mohd Nazmin and Sato, Kaiji and Shinshi, Tadahiko (2019) Position Measurement And Control Of A Thin And Compact Linear Switched Reluctance Motor With A Disposable-Film Mover. SENSORS AND ACTUATORS A: PHYSICAL, 285. pp. 80-88. ISSN 0924-4247

Masni-Azian, Akiah and Masao, Tanaka (2017) Statistical factorial analysis approach for parameter calibration on material nonlinearity of intervertebral disc finite element model. Computer Methods in Biomechanics and Biomedical Engineering,. pp. 1-10. ISSN 1025-5842

Masrukin, Yully Erwanti and Zakaria, Zahriladha and Sam, Weng Yik and Sadick Ali, Nur Shaheera Alia (2017) A Novel Of Dual-Band Bandpass Filter Employing Coupled Stepped Impedance Resonator And U-Shaped Defected Microstrip Structure (DMS). International Journal On Communications Antenna and Propagation (IRECAP), 7 (3). pp. 1-7. ISSN 2039 – 5086

Masrullizam, Mat Ibrahim and Syafeeza, Ahmad Radzi and Soraghan, John (2016) Tracking The Eyes Using Interdependence Mean Shift Tracking Algorithm With Appropriate Information Provided. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7862-7865. ISSN 1819-6608

Mastura, Mohd Azlim and Kalthom, Husain and Burairah, Hussin and Zulisman, Maksom (2016) Designing collaborative learning wizard to assist instructors in utilizing tools in LMS. 2015 IEEE Conference On e-Learning, e-Managernent And e-Services. pp. 81-85. ISSN 978-146739437-6

Masuaud, Zaffrul Zulkarnain Aziz and Othman, Mohd Azlishah and Ali, Nadhirah and Sulaiman, Hamzah Asyrani and Abd Aziz, Mohamad Zoinol Abidin (2015) An Analysis Of D-Band Gunn Diode For Millimeter Wave Application. ARPN Journal Of Engineering And Applied Sciences, 10 (2). pp. 661-665. ISSN 1819-6608

Mat, Zawiah and Basir, Siti Arni and Jano, Zanariah (2016) Factors affecting the practice of islamic professional ethics : A case study of a public sector. International Business Management, 10 (17). pp. 3860-3866. ISSN 1993-5250

Mat Harttar, Maziati Akmal and Abd Rashid, Mohd Warikh and Azlan, Umar Al-Amani and Azmi, Nurul Azuwa and Salleh, Mohd Shukor and Kasim, Mohd Shahir (2017) Optimizing The Processing Conditions Of Sodium Potassium Niobate Thin Films Prepared By Sol-Gel Spin Coating Technique. Ceramics International, 44. pp. 317-325. ISSN 0272-8842

Mat Harttar @ Mohd Hatta, Maziati Akmal and Azlan, Umar Al-Amani and Abd Rashid , Mohd Warikh and Azmi, Nurul Azuwa (2015) Enhanced Structural And Electrical Properties Of Lead-Free Y-Doped (K, NA) NBO3 Thin Films. Jurnal Teknologi, 77 (21). pp. 67-71. ISSN 0127-9696

Mat Ibrahim, Masrullizam (2014) Eye-state analysis using an interdependence and adaptive scale mean shift (IASMS) algorithm. Biomedical Signal Processing and Control, 11. pp. 53-62. ISSN 1746-8094

Mat Ibrahim, Masrullizam (2015) Yawn analysis with mouth occlusion detection. Biomedical Signal Processing and Control, 18. pp. 360-369. ISSN 1746-8094

Mat Ibrahim, Masrullizam and Ahmad Radzi, Syafeeza and John, Soraghan (2016) Tracking The Eyes Using Interdependence Mean Shift Tracking Algorithm With Appropriate Information Provided. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7862-7865. ISSN 1819-6608

Mat Ibrahim, Masrullizam and Soraghan , John and Abd Manap, Nurulfajar (2014) Iris localisation using Fuzzy Centre Detection (FCD) scheme and active contour snake. Jurnal Teknologi (Sciences and Engineering), 69 (6). pp. 73-77. ISSN e-ISSN 2180 – 3722

Mat Kassim, Nabilah and Abdullah, Abdul Rahim and Abdul Kadir, Aida Fazliana and Shamsudin, Nur Hazahsha (2016) Analysis Of Harmonic Source Identifier Using Periodogram. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5071-5077. ISSN 1819-6608

Mat Lazi, Jurifa and Ibrahim, Zulkifilie and Sulaiman , Marizan (2011) Mean And Diffrential Torque Control Using Hysteresis Current Controller For Dual PMSM Drives. Journal of Theoretical and Applied Information Technology, 33 (1). pp. 76-82. ISSN 1992-8645

Mat Noor, Noraina Alia and Abd Razak, Jeefferie and Ismail, S. and Mohamad, N. and Yaakob, M. Y. and T. H., Theng (2017) Influence Of MWCNTs Addition On Mechanical And Thermal Behavior Of Epoxy/Kenaf Multi-Scale Nanocomposite. IOP Conference Series: Materials Science And Engineering, 210. pp. 1-10. ISSN 1757-899X

Mat Rawi, Nor Afifah and Muslim, Zulkiflee and Ayop, Zakiah and Nahar, Haniza and Mohd Abid, Mohd Asyadi 'Azam (2019) Effect Of Video Encoding Scheme Of Battery Consumption Of Mobile Device. Journal Of Advanced Computing Technology And Application (JACTA), 1 (1). pp. 15-23. ISSN 2672-7188

Mat Seman, Norhidayah and Jamaludin, Zamberi and Minhat, Mohamad (2018) System Interface Design For CAD/CAM-Simulink Data Exchange System Using MATLAB. Intelligent Manufacturing & Mechatronics, LNME. pp. 639-647. ISSN 2195-4356

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli and Hasan, Rafidah and Amiruddin, Hilmi and Abdullah, Muhammad Ilman Hakimi Chua (2017) Statistical Models For Predicting Wear And Friction Coefficient Of Palm Kernel Activated Carbon-Epoxy Composite Using The ANOVA. Industrial Lubrication And Tribology, 69 (5). pp. 761-767. ISSN 0036-8792

Mat Tahir, Noor Ayuma and Abdollah, Mohd Fadzli bin and Hasan, Rafidah and Amiruddin, Hilmi (2016) The Effect Of Sliding Distance At Different Temperatures On The Tribological Properties Of A Palm Kernel Activated Carbon-Epoxy Composite. Tribology International, 94 (-). pp. 352-359. ISSN 0301-679X

Maziati Akmal, M. H. and Mohd Warikh, Abd Rashid and Umar Al-Amani, Azlan and Mohd Asyadi Azam, Mohd Abid and Syahriza, Ismail (2016) Effect Of Amphoteric Dopant On The Dielectric And Structural Properties Of Yttrium Doped Potassium Sodium Niobate Thin Film. Materials Letters, 170. pp. 10-14. ISSN 0167-577X

Mazlan, Mazliah and Mohamad, Noraiham and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Othman, Intan Sharhida and Hashim, Hanizam and Mohd Abid, Mohd Asyadi 'Azam and Ahsan, Qumrul and Mohd Safeai, Nur Maizatul Nadia and Mohd Mef’at, H. (2017) Weight Loss By Soil Burial Degradation Of Green Natural Rubber Vulcanizates Modified By Tapioca Starch. Proceedings Of Mechanical Engineering Research Day 2017. pp. 405-407. ISSN -

Mazlan, Mohammad Hanif and Ahmad, Badrul Hisham and Husain, Mohd Nor and Zakaria, Zahriladha and Shairi, Noor Azwan and Zahari, Mohd Khairy and Hassan, Nornikman (2017) Design And Analysis Of SIW Bandstop Filters For Interference Suppression In X Band. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-5). pp. 1-5. ISSN 2180-1843

Md Ali, Mohd Amran and Abdul Aziz, Mohd Sanusi and Redzuwan, Bahrin Ikram and Muhammad Zaimi, Zainal Abidin and Raja Abdullah, Raja Izamshah and Kasim, Mohd Shahir and Mizobuchi, Akira and Ishida, Tohru (2017) Mechanical Properties And Cutting Performance Of Electroless Ternary Ni-W-P Coated Cutting Tools. Jurnal Teknologi , 79 (5-2). pp. 101-104. ISSN 2180-3722

Md Ali, Mohd Amran and Abdullah, Abu and Mohamad, Effendi and Salleh, Mohd Shukor and Hussein, Nur Izan Syahriah and Muhammad, Z. and Dahaman, Shamshulizam (2018) Tensile properties of ternary blends for HDPE/PP/Recycle HDPE in blow moulding process. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (1(2)). pp. 31-41. ISSN 1985-3157

Md Ali, Mohd Amran and K.M, Faizal and Salleh, Mohd Shukor and Sulaiman, Mohd Amri and Mohamad, Effendi (2015) Design Consideration For Design A Flat And Ring Plastics Part Using Solidworks Software. IOP Conference Series: Materials Science And Engineering, 100 (1). pp. 1-9. ISSN 1757-8981

Md Ali, Mohd Amran and M., Faizal and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Subramonian, Sivarao (2015) Product And Tooling Design Of Slanted Glass Injection Mould For Visualization Of Flow Molten Plastic. Jurnal Teknologi, 77 (21). pp. 9-18. ISSN 0127-9696

Md Ali, Mohd Amran and Mohd Ali, Noorfa Idayu and Abdullah, Zulkeflee and Abu Bakar, Mohd Hadzley and Subramonian, Sivarao and Abdul Aziz, Mohd Sanusi and Abdullah, Abu (2017) Interchangeable Core And Cavity Plates For Two-Plate Family Injection Mould. Journal Of Mechanical Engineering And Sciences (JMES), 11 (3). pp. 2815-2824. ISSN 2289-4659

Md Fahmi, Abd Samad (2016) Deterministic Mutation Algorithm As A Winner Over Forward Selection Procedure. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 5114-5119. ISSN 1819-6608

Md Fauadi, Muhammad Hafidz Fazli and Akmal, Suriati and Mat Ali, Mahasan and Anuar, Nurul Izah and Ramlan, Samad and Mohamed Noor, Ahamad Zaki and Awang, Nurfadzylah (2018) Intelligent Vision-Based Navigation System For Mobile Robot: A Technological Review. Periodicals Of Engineering And Natural Sciences (PEN), 6 (2). pp. 47-57. ISSN 2303-4521

Md Ghazaly, Mariam and Yeo, Chin Kiat and Chong, Shin Horng and Yusri, I and Tee, Siau Ping (2017) Parameter Optimization Of A Tubular Linear Type Reluctance Motor For High Thrust Force. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9. pp. 117-120. ISSN 2180-1843

Md Ghazaly, Mariam and Yeo, Chin Kiat and Chong , Shin Horng and Jamaludin, Irma Wani and Ranom, Rahifa (2018) Influence Of Materials,Air Gap And Winding Turns For A Tubular Linear Switched Reluctance Actuator (TLSRA). Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-2). pp. 63-66. ISSN 2289-8131

Md Ghazaly, Mariam and Yusri, Izzati and Ranom, Rahifa and Rahmat, Mohd Fuaad and Jamaludin, Irma Wani (2018) Comparison Of Torque Performances On Different Core Material For Switched Reluctance Actuator Without Permanent Magnet. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-2). pp. 53-56. ISSN 2289-8131

Md Isa, Azmi Awang and Othman, Muhammad Hakim and Manap, Zahariah and Mohamad Isa, Mohd Sa'ari and Mohd Zin, Mohd Shahril Izuan and Md Saat, Mohd Shakir and Zakaria, Zahriladha (2016) Improved Location And Positioning Utilizing Single MIMO Base Station In IMT-Advanced System. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (1). 75 - 82. ISSN 2289-8131

Md Isa, Mohamed Hafiz and Tee, Boon Tuan and Zakaria, Muhammad Zulfattah and Zulkafli, Nur Izyan and Rivai, Ahmad and Ab Razak, Juhari and Yusof, Ahmad Anas (2017) Emission Inventory For Area Source: Case Study In Majlis Bandaraya Melaka Bersejarah (MBMB) Region. International Journal Of Environment, Society & Space (IJESS), 5 (2). pp. 9-17. ISSN 2289-5299

Md Isa, Mohamed Hafiz and Zakaria, Muhammad Zulfattah and Abdul Munajat, Nurain and Abu Bakar, Fateh Sakinah and Haron, Muhammad Asyraf (2017) Cleaner Production Implementation At Chicken Slaughtering Plant. ARPN Journal Of Engineering And Applied Sciences, 12 (14). pp. 4324-4328. ISSN 1819-6608

Md Saad, Mohd Shamsuri and Abdul Majid, Izaidin (2014) Employers Perceptions Of Important Employability Skills Required From Malaysian Engineering And Information And Communication Technology ICT Graduates. Global Journal of Engineering Education, 16 (3). pp. 110-115. ISSN -

Md Saat, Mohd Shakir and Yusop, Yusmarnita and Abd Ghani, Zamre and Husin, Siti Huzaimah and Rahman, F.K.A. (2017) A Modified Class-Eπ1b For Capacitive Power Transfer System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-13). pp. 87-92. ISSN 2180-1843

Md Yusop, Azdiana and Mohamed, Ramizi and Ayob, Afida and Mohamed, Azah (2017) Shapeable Maximum-Power Point-Tracking Algorithm To Improve The Stability Of The Output Behavior Of A Thermoelectric-Solar Hybrid Energy-Harvesting System. Journal Of The Association Of Arab Universities For Basic And Applied Sciences, 22. pp. 1-8. ISSN 1815-3852

Md. Azmi, Karnain and Zahriladha, Zakaria (2015) A Review On ZigBee Security Enhancement In Smart Home Environment. 2015 IEEE 2nd International Conference On InformationScience And Security (ICISS). pp. 1-4. ISSN 978-146738611-1

Meor Said, Maizatul Alice and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah and Mohd Salleh, Noor Hasyierah and Misran, Mohamad Harris (2016) Dual Band Rectifying Circuit For Rf Energy Scavenging. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3286 - 3290. ISSN 1819-6608

Milad, Ali Ahmad and Muhamad Noh, Zul Azri and Shibghatullah, Abdul Samad and Algaet, Mustafa Almahdi (2013) Reverse Direction Transmission in Wireless Networks: Review. Middle-East Journal of Scientific Research. pp. 767-778. ISSN 1990-9233

Ming Hui, Tan and Shin Horng, Chong and Teng Fong, Tan and Ahmad Zaki, Shukor and Sakthivelu, Vasanthan and T.C., Ma and Mohamad Riduwan, Md Nawawi (2016) Tracking Control Of Vertical Pneumatic Artificial Muscle System Using Pid. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 129-132. ISSN 2180-1843

Misha, Suhaimi and Ahmed Al-Qadhi, Ahmed Abdullah and Mohd Rosli, Mohd Afzanizam and Akop, Mohd Zaid (2017) Design And Simulation Of An Optimized Mixed Mode Solar Dryer Integrated With Desiccant Material. International Journal of Mechanical & Mechatronics Engineering , 17. pp. 65-73. ISSN 2077-124X (online) 2227-2771 (Print)

Misha, Suhaimi and Ahmed Al-Qadhi, Ahmed Abdullah and Mohd Rosli, Mohd Afzanizam and Yusof, Ahmad Anas (2018) Experimental Investigation On Indirect, Natural And Forced Convection Mixed Mode Solar Dryer. International Journal Of Mechanical And Mechatronics Engineering, 18. pp. 87-96. ISSN 2227-2771

Miswan, Nor Hamizah and Hussin, Nor Hafizah and Mohd Said, Rahaini and Hamzah, Khairum and Ahmad, Emy Zairah (2016) ARAR algorithm in forecasting electricity load demand in Malaysia. Global Journal Of Pure And Applied Mathematics, 12 (1). pp. 361-367. ISSN 0973-1768

Miswan, Nor Hamizah and Mohd Said, Rahaini and Hussin, Nor Hafizah and Hamzah, Khairum and Ahmad, Emy Zairah (2016) Comparative performance of ARIMA and DES models in forecasting electricity load demand in Malaysia. International Journal Of Electrical & Computer Sciences IJECS-IJENS, 16 (1). pp. 6-9. ISSN 2227-2739

Miswan, Siti Aishah and Azmi, Mohd Sanusi and Arbain, Nur Atikah and Tahir, Azrina and Radzid, Amirul Ramzani (2018) Rearrangement Of Coordinate Selection For Triangle Features Improvement In Digit Recognition. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-7). pp. 115-119. ISSN 2180-1843

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, M. A. and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A proposal of Muda Indicator agent to estimate Lean Manufacturing verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and Ito, Teruaki and Yuniawan, Dani and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal of Advanced Manufacturing Technology (JAMT) , 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Effendi and T., Ito and D., Yuniawan and Ibrahim, Mohamad Amran and Saptari, Adi and Kasim, Mohd Shahir and Raja Abdullah, Raja Izamshah and Shibghatullah, Abdul Samad and Md Ali, Mohd Amran (2014) A Proposal Of Muda Indicator Agent To Estimate Lean Manufacturing Verification. Journal Of Advanced Manufacturing Technology, 8 (2). pp. 71-82. ISSN 1985-3157

Mohamad, Mas Haslinda and Hasanuddin, Mohd Amin and Ramli, Mohd Hafizzie (2013) Vehicle Accident Prevention System Embedded With Alcohol Detector. International Journal Of Review In Electronics & Communication Engineering (Ijrece), 1. pp. 7-16. ISSN 2321-3140

Mohamad, Mas Haslinda and Mahmat Sani, Norairin (2013) Energy Detection Technique In Cognitive Radio Network. International Journal of Engineering and Technology, 13. pp. 69-73. ISSN 0975-4024

Mohamad, Najmiah Radiah and Ab Ghani, Mohd Sabri and Salleh, Azahari and Hashim, Nik Mohd Zarifie and Ab Hadi, Nik Azran (2015) Implementation And Effect Of Sensor Technology In Building Level Balancer Using Programmable Integrated Circuit Microcontroller. International Journal for Advance Research in Engineering and Technology, 3 (XII). pp. 13-17. ISSN 2320-6802

Mohamad, Najmiah Radiah and Jiim, Anthony Bruster and Salleh, Azahari and Hashim, Nik Mohd Zarifie and Abd Aziz, Mohamad Zoinol Abidin and Zakaria, Zahriladha and Ab Hadi, Nik Azran (2015) Implementation And Effect Of Long Range RFID Technology At Ultra High Frequency Band In Bus Detection System For Blind People. International Journal Of Advanced Research in Engineering & Management (IJAREM), 1 (9). pp. 15-22. ISSN 2456-2033

Mohamad, Najmiah Radiah and Yusoff, S. A. S. and Salleh, Azahari and Hashim, Nik Mohd Zarifie and Yusop, Norbayah and Misran, Mohamad Harris (2014) An Initial Development Of Simple And Low-Cost Approach For Affordable Semi-Automatic Car. International Journal for Advance Research in Engineering and Technology, 2 (XI). pp. 1-5. ISSN 2320-6802

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Jafar, Fairul Azni and Mohamed Noor, Ahamad Zaki and Nordin, Mohd Hisham (2018) Simulation-Based Multi-Objective Optimization For Distributed Material Transportation System. International Journal Of Engineering & Technology, 7 (3.20). pp. 92-94. ISSN 2227-524X

Mohamad, Nor Rashidah and Md Fauadi, Muhammad Hafidz Fazli and Zainudin, Siti Fairus and Mohamed Noor, Ahamad Zaki and Jafar, Fairul Azni and Mat Ali, Mahasan (2018) Optimization Of Material Transportation Assignment For Automated Guided Vehicle (AGV) System. International Journal Of Engineering & Technology, 7 (3.20). pp. 334-338. ISSN 2227-524X

Mohamad, Noraiham and Yaakub , Juliana and Ab Maulod, Hairul Effendy and Abd Razak, Jeefferie and Yaakob, Mohd Yuhazri and Lau, Kok Tee and Ahsan, Qumrul and Shueb, Mohammed Iqbal and Othman, R. (2017) Vibrational Damping Behaviors Of Graphene Nanoplatelets Reinforced NR/EPDM Nanocomposites. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3274-3287. ISSN 2289-4659

Mohamad, Noraiham and Mazlan, Mazliah and Ab Maulod, Hairul Effendy and Abdul Razak, Jeefferie and Hamdan, Mohd Mef’at (2018) Rebound Resilience Of Natural Rubber Composites Via Response Surface Methodology. Proceedings Of Mechanical Engineering Research Day 2018, 1. pp. 130-131. ISSN 978-967-2145-20-2

Mohamad, Nur Syuhada and Hussin, Burairah and Shibghatullah, Abdul Samad and Hasan Basari, Abd Samad (2014) Banknote authentication using artificial neural network. International Symposium on Research in Innovation and Sustainability. pp. 1865-1868. ISSN 1013-5316

Mohamad Ariffin, Mutalib and Zahriladha, Zakaria and Noor Azwan, Shairi and Sam, Weng Yik (2016) Design Of Microstrip Bandpass Filter With Electronically Tunable Notch Response. 26th Conference Radioelektronika 2016. pp. 454-457. ISSN 978-150901674-7

Mohamad Basir, Muhammad Sufyan Safwan and Abdullah, Abdul Rahim and Ranom, Rahifa and Kasim, Rizanaliah and Selamat, Nur Asmiza and Shamsudin, Nur Hazahsha (2016) Experimental Verification Of Nickel-Metal Hydride Battery Parameters Estimation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 47-52. ISSN 2180-1843

Mohamad Hafiz, Harun and Mohd Razali, Md Yunos and Mohamad Zaharudin, Sariman and Fauzi, Ahmad and Khisbullah, Hudha and Rosli, Abu Bakar (2016) Semi-Active Secondary Suspension Control Using Fuzzy Skyhook For Improving Railway Vehicle Dynamics Performance In Lateral Direction. ARPN Journal Of Engineering And Applied Sciences, 11 (4). pp. 2454-2461. ISSN 1819-6608

Mohamad Hafize, Ramli and Mohamad Zainol Abidin, Abd Aziz and Mohd Azlishah, Othman and Abdul Halim, Dahalan (2016) Design Multiband Planar Printed Monopole Antenna With Minkowski And Lollipop Defected Parasitic Structure (DPS) For Wireless Communication System. 26th Conference Radioelektronika 2016. pp. 475-480. ISSN 978-150901674-7

Mohamad Hafize, Ramli and Mohamad Zoinol Abidin, Abd Aziz and Mohd Azlishah, Othman and Nornikman, Hassan and Muhammad Syafiq, Noor Azizi and Siti Nurfarhanah, Azizul Azlan and Abdul Halim, Dahalan and Hamzah Asyrani, Sulaiman (2016) Design Of Sierpinski Gasket Fractal Antenna With Slits For Multiband Application. Jurnal Teknologi, 78 (5-8). pp. 123-128. ISSN 0127-9696

Mohamad Haniff , Harun and Khalil Azha, Mohd Annuar and Mohd Firdaus, Mohd Ab Halim and Mohd Hanif, Che Hasan and Mohd Shahrieel, Mohd Aras and Muhamad Faizal, Yaakub (2016) Peltier And Seebeck Efficacy Of Hot And Cold Air System For Portable O-Ref (Oven & Refrigerator) Application. Proceedings of Mechanical Engineering Research Day 2016. pp. 81-82. ISSN 9789670257709

Mohamad Hashim, Ummi Kalsom and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Sakidin, Hamzah and Balakrishnan, Subatira and Mohamad Isa, Mohd Sa'ari (2016) Change detection from landsat-5 TM satellite data. ARPN Journal Of Engineering And Applied Sciences, 11 (17). pp. 10234-10238. ISSN 1819-6608

Mohamad Isa, Mohd Sa'ari and Azmi, Aini Noor Liana and Azmi , Awang Md Isa and Md Saat, Mohd Shakir and Abu, Maisarah and Ahmad, Azlinda (2014) Wearable Textile Antenna On Electromagnetic Band Gap (EBG) For Wlan Applications. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 6 (2). pp. 51-58. ISSN 2180-1843

Mohamad Isa, Mohd Sa'ari and Langley, Joe and Khamas, S and Mohd Zin, Mohd Shahril Izuan and Zakaria, Zahriladha and Haron, Nor Zaidi and Ahmad, Azhar (2014) A Technique Of Scan Blindness Elimination For Planar Phased Array Antenna Using Miniaturized EBG. Jurnal Teknologi, 69 (2). pp. 11-15. ISSN 2180–3722

Mohamad Ishak, Nurul Naili and Salleh, Mohd Shukor and Yahaya, Saifudin Hafiz and Mohamad, Effendi and Sulaiman, Mohd Amri (2017) The Effect of Equal Channel Angular Pressing (ECAP) on the Microstructure and Hardness of A356 Aluminium Alloy. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 47-57. ISSN 1985-3157

Mohamad Jaya, Abdul Syukor and Muhamad, Mohd Razali and Abd Rahman, Md Nizam and Mohammad Jarrah, Mu'ath Ibrahim and Hasan Basari, Abd Samad (2015) Modeling And Optimization Of Physical Vapour Deposition Coating Process Parameters For Tin Grain Size Using Combined Genetic Algorithms With Response Surface Methodology. Journal Of Theoretical And Applied Information Technology, 77. pp. 236-252. ISSN 1992-8645

Mohamad Juoi, Jariah and Arudra, Dilip and Mohd Rosli, Zulkifli and Abd Rahim, Toibah and Shamsuri, Siti Rahmah and Japper-Jaafar, Azuraien (2013) Physical and mechanical properties of glass composite material made from incinerated scheduled waste slag and SLS waste glass. Advanced Materials Research, 626. pp. 280-288. ISSN 1022-6680

Mohamad Juoi, Jariah and Arudra, Dilip and Mohd Rosli, Zulkifli and Japper-Jaafar, Azuraien and Husain, Kalthom (2013) Microstructural properties of glass composite material made from incinerated scheduled waste slag and soda lime silicate (SLS) waste glass. Journal of Non-Crystalline Solids, 367. pp. 8-13. ISSN 0022-3093

Mohamad Kamal, Mohamad Ridzuan and Abdul Rahman, Abdul Raheem and Wakhi Anuar, Nur Farah Bazilah and Salleh, Mohd Shukor (2017) Effect Of Coating Thickness On The Microstructure And Mechanical Properties Of AL-SI (LM6) Alloy Lost Wax Casting. Journal Of Mechanical Engineering, SI (3) (1). pp. 97-106. ISSN 1823- 5514

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan (2019) Identification Of Weak Buses In Electrical Power System Based On Modal Analysis And Load Power Margin. ARPN Journal Of Engineering And Applied Sciences, 14 (7). pp. 1377-1384. ISSN 1819-6608

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan (2019) Voltage Instability Analysis Based On Modal Analysis Technique And Artificial Neural Network. Indonesian Journal Of Electrical Engineering And Computer Science, 13 (3). pp. 1274-1279. ISSN 2502-4752

Mohamad Nor, Ahmad Fateh and Sulaiman , Marizan and Abdul Kadir, Aida Fazliana and Omar, Rosli (2017) Classifications Of Voltage Stability Margin (VSM) And Load Power Margin (LPM) Using Probabilistic Neural Network (PNN). ARPN Journal Of Engineering And Applied Sciences, 12 (19). pp. 5591-5596. ISSN 1819-6608

Mohamad Razali, Azziddin and Rahman, ,Mahmudur Azizur and A. Rahim , Nasrudin (2016) Real-Time Implementation Of D-Q Control For Grid Connected Three Phase Voltage Source Converter. ASDDD, 4. p. 11. ISSN 1553-572X

Mohamad Yatim, Norazlina and Norazman, Farhaneem and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Norhidayah (2019) Characterization Of phosphoric acid biochar derived from rubber wood sawdust for enhancement Of urea fertilizer impregnation. ARPN Journal Of Engineering And Applied Sciences, 14 (12). pp. 2185-2192. ISSN 1819-6608

Mohamad Yatim, Norazlina and Shaaban, Azizah and Dimin @ Mohd Amin, Mohd Fairuz and Mohamad, Noraiham and Yusof, Faridah (2019) Urea functionalized multiwalled carbon nanotubes as efficient nitrogen delivery system for rice. Advances In Natural Sciences: Nanoscience And Nanotechnology, 10 (1). pp. 1-11. ISSN 2043-6262

Mohamed, N. J. and Sahib, Shahrin and Suryana, Nanna and Hussin, Burairah (2016) Understanding Network Congestion Effects On Performance: Article Review. Journal Of Theoretical And Applied Information Technology, 92 (2). pp. 311-321. ISSN 1992-8645

Mohamed, Zaharuddin and Jaafar, Hazriq Izzuan and Mohd Subha, Nurul Adilla and Husain, Abdul Rashid and Ismail, Fatimah Sham and Ramli, Liyana and Tokhi, Mohammad Osman and Shamsudin, Mohamad Amir (2019) Efficient Control Of A Nonlinear Double-Pendulum Overhead Crane With Sensorless Payload Motion Using An Improved PSO-Tuned PID Controller. Journal Of Vibration And Control, 25 (4). pp. 907-921. ISSN 1077-5463

Mohamed Aminuddin, Mai Mariam (2014) The effect of different levels of continuous tones vibrant on focus ability in teenagers. 2014 . pp. 454-457. ISSN 1992-8645

Mohamed Aminuddin, Mai Mariam and Balasubramaniam, Manimekalai (2016) Effect of electrode size on salinity-voltage correlation. MALTESAS Multi-Disciplinary Research Journal (MIRJO), 1 (1). pp. 9-13. ISSN 0127-6271

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2018) The Feasibility Of Music And Talk Radio Program As A Focus Stimulant For Driver. International Journal Of Human And Technology Interaction (IJHaTI), 2 (1). pp. 45-49. ISSN 2950-3551

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2019) Focus Loss While Driving Detection By Using Prior Stage ERP As Baseline. International Journal Of Human And Technology Interaction (IJHaTI), 3 (1). pp. 39-46. ISSN 2590-3551

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah (2017) Loudness Perception Differentiation Using Repeating Sinus Rhythm. MALTESAS Multi-Disciplinary Research Journal (MIRJO), 2 (3). pp. 47-54. ISSN 0127-6271

Mohamed Aminuddin, Mai Mariam and Mohd Nasir, Haslinah and Mustaffa, Izadora and Brahin, Noor Mohd Ariff (2018) N170 wave amplitude analysis on driving performance on highway road. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-6). pp. 145-148. ISSN 2180-1843

Mohamed Aminuddin, Mai Mariam and Meor Said, Maizatul Alice and Misran, Mohamad Harris and Salleh, Azahari and Ismail, Mohd Muzafar and Sulaiman, Hamzah Asyrani and Abd Rahim, Rosman and Ali, Nur Alisa and Yusop, Norbayah and Ramlee, Ridza Azri and Othman, Mohd Azlishah (2013) Performance Of Power Amplifier With Different Matching Techniques For GPS Application. Australian Journal Of Basic And Applied Sciences, 7 (12). pp. 206-212. ISSN 2309-8414

Mohamed Aminuddin, Mai Mariam and Misran, Mohamad Harris and Meor Said, Maizatul Alice and Salleh, Azahari and Othman, Mohd Azlishah and Ismail, Mohd Muzafar and Sulaiman, Hamzah Asyrani and Yusop, Norbayah and Ramlee, Ridza Azri (2013) RFID Based Medical Database System. Australian Journal of Basic and Applied Sciences, 7 (12). pp. 213-220. ISSN 1991-8178 (Unpublished)

Mohamed Arifin, Yusmady and Akop, Mohd Zaid and Lai, Tak Oon and Ewe, Tek Bee and Tee, Boon Tuan and Shamsudin, Shamsul Anuar (2015) A study of double-layered wall and prism deflector to improve natural ventilation in a confined space. Journal Of Advanced Manufacturing Technology (JAMT) , 9 (2). pp. 75-88. ISSN 1985-3157

Mohamed Hatim, Shahirah and Elias, Shamsul Jamel and Darus, Mohamad Yusof and Abdullah, Shapina and Jasmis, Jamaluddin and Ahmad, R. Badlishah and Khang, Adam Wong Yoon (2019) Congestion control in vehicular adhoc network: A survey. Indonesian Journal of Electrical Engineering and Computer Science, 13 (3). pp. 1280-1285. ISSN 2502-4752

Mohamed Kassim, Anuar and Mohd Aras, Mohd Shahrieel and Shukor, Ahmad Zaki and Jaafar, Hazriq Izzuan and Ab Rashid, Mohd Zamzuri and Baharom, Mohamad Faizal and Jafar, Fairul Azni (2015) Development and evaluation of two-parallel crawler robot by using proportional controller. Jurnal Teknologi, 77 (20). pp. 39-45. ISSN 0127-9696

Mohamed Kassim, Anuar and Yasuno, Takashi and Mohd Aras, Mohd Shahrieel and Shukor, Ahmad Zaki and Jaafar, Hazriq Izzuan and Baharom, Mohamad Faizal and Jafar, Fairul Azni (2015) Vision based of tactile paving detection method in navigation system for blind person. Jurnal Teknologi, 77 (20). pp. 25-32. ISSN 0127-9696

Mohamed Kassim, Anuar and Yasuno, Takashi and Suzuki, Hiroshi and Jaafar, Hazriq Izzuan and Mohd Aras, Mohd Shahrieel (2016) Indoor Navigation System Based On Passive RFID Transponder With Digital Compass For Visually Impaired People. (IJACSA) INTERNATIONAL JOURNAL OF ADVANCED COMPUTER SCIENCE AND APPLICATIONS, 7 (2). pp. 604-611. ISSN 2156-5570

Mohamed Sultan, Al Amin (2018) Managing Supply Chain Complexity: Foresight For Wind Turbine Composite Waste. Procedia CIRP, 69. pp. 938-943. ISSN 2212-8271

Mohamed Sultan, Al Amin and Mativenga, Paul Tarisai (2019) Sustainable Location Identification Decision Protocol (SuLIDeP) For Determining The Location Of Recycling Centres In A Circular Economy. Journal Of Cleaner Production, 223. pp. 508-521. ISSN 0959-6526

Mohamed Yunus, Mawarni and Din, Jafri and Jong, Siat Ling and Lam, Hong Yin (2018) Slant Path Ka-Band rain attenuation statistics in equatorial Malaysia obtained using stratiform convective-synthetic storm technique. International Journal Of Engineering & Technology, 7 (2). pp. 22-25. ISSN 0975-4024

Mohammad, Muhammad Azrain and Mansor, Muhd Ridzuan and Sheikh Md Fadzullah, Siti Hajar and Omar, Ghazali and Dhar Malingam, Sivakumar and Nordin, Mohd Nur Azmi and Lim, L. M. (2018) Analysis of mechanisms responsible for the formation of dark spots in organic light emitting diodes (OLEDs): a review. Synthetic Metals, 235. pp. 160-175. ISSN 0379-6779

Mohammad Taha, Mastura and Salit @ Sinon, Mohd Sapuan and Mansor, Muhd Ridzuan and Abdul Aziz, Nuraini (2016) Application Of Hybrid Sugar Palm-Filled Polyurethane Application Of Hybrid Sugar Palm-Filled Polyurethane Composites In Conceptual Design Of An Automotive Anti Roll Bar. Journal of Engineering and Technology (JET), 7 (1). pp. 102-113. ISSN 2180-3811

Mohammed, Mahbubul Islam and Shikh Anuar, Fadhilah and Rahman, Saidur and Leong, Kin Yuen and Muhammad Afifi, Amalina (2013) Thermophysical Properties And Heat Transfer Performance Of Al2O3/R-134a Nanorefrigerants. International Journal Of Heat And Mass Transfer, 57. pp. 100-108. ISSN 0017-9310

Mohammed, Rasheed and Rosli, Omar and Afiqah, Sabari and Marizan, Sulaiman (2016) Validation Of A Three-Phase Cascaded Multilevel Inverter Based On Newton Raphson (N.R.). Indian Journal Of Science And Technology (INDJST), 9 (20). pp. 1-13. ISSN 0974-6846

Mohammed, Rasheed and Rosli, Omar and Marizan, Sulaiman (2016) Design And Development Multilevel Inverterwith Different Modulation Index (MI) Based On Super Capacitor (SC) For Harmonic Reduction. World Applied Sciences Journal (WASJ), 34 (6). pp. 760-769. ISSN 1818-4952

Mohamood, Nadzrie and Hashim, Nik Mohd Zarifie and Aziz, Khairul Azha A (2014) Sliding Window for Radial Basis Function Neural Network Face Detection. International Journal of Science and Engineering Applications , 3 (4). pp. 94-97. ISSN 2319-7560

Mohd Ab Halim, Mohd Firdaus and Azlan, Umar Al-Amani and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Manap, Mustafa and Johari, Siti Halma and Abdullah, Abdul Rahim and Hushim, Mohd Faisal (2017) Lighting Retrofit Scheme Economic Evaluation. Indonesian Journal Of Electrical Engineering And Computer Science, 5 (3). 496 - 501. ISSN 2502-4752

Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Mohd Annuar, Khalil Azha and Azahar, Arman Hadi and Ab Hadi, Nik Azran (2016) Photovoltaic Economic Potential For Investment Portfolio In South East Asia. ARPN Journal Of Engineering And Applied Sciences, 11 (19). pp. 11260-11265. ISSN 1819-6608

Mohd Abid, Mohd Asyadi Azam (2013) Significant Capacitance Performance of Vertically Aligned Single-Walled Carbon Nanotube Supercapacitor by Varying Potassium Hydroxide Concentration. International Journal of Electrochemical Science (IJES), 8 (3). pp. 3902-3911. ISSN 1452-3981

Mohd Abid, Mohd Asyadi 'Azam and Raja Seman, Raja Noor Amalina and Mohamed Effendi, Salmi (2017) Preparation Of Hydrous Ruthenium Oxide/Activated Carbon Electrode And Its Supercapacitive Performance In 6 M KOH. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (2). pp. 1-8. ISSN 1985-3157

Mohd Abid, Mohd Asyadi Azam and Alias, Farizul Muiz and Liew, Weng Tack and Raja Seman, Raja Noor Amalina and Mohamad Taib, Mohamad Fariz (2017) Electronic Properties And Gas Adsorption Behaviour Of Pristine, Silicon-, And Boron-Doped (8, 0) Single-Walled Carbon Nanotube : A First Principles Study. Journal of Molecular Graphics and Modelling, 75 (-). pp. 85-93. ISSN 1093-3263

Mohd Abid, Mohd Asyadi Azam and Isomura , Kazuki and Ismail, Syahriza and Mohamad, Noraiham and Shimoda, Tatsuya (2015) Electrically Conductive Aluminum Oxide Thin Film Used As Cobalt Catalyst-Support Layer In Vertically Aligned Carbon Nanotube Growth. Advances In Natural Sciences : Nanoscience And Nanotechnology, 6 (-). pp. 1-6. ISSN -

Mohd Aboobaider, Burhanuddin and Mohammed Al-Khazraji, Ali Abdul-Jabbar and Ismail, Ronizam and Hameed, Mustafa Emad and Basiron, Halizah and Kareem, Ali Noori (2018) A review on security challenges and features in wireless sensor networks: IoT perspective. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 17-21. ISSN 2180-1843

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Mohd Sobran, Nur Maisarah and Bahar, Mohd Bazli and Oh, Kok Ken and Mat Ibrahim, Masrullizam and Johan, Nurul Fatiha (2016) Detection of multiple mangoes using histogram of oriented gradient technique in aerial monitoring. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2730-2736. ISSN 1819-6608

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Wong, Gao Jie and Bahar, Mohd Bazli and Sulaiman, Marizan and Mat Ibrahim, Masrullizam and Zainal Abidin, Amar Faiz (2017) Quality checking and inspection based on machine vision technique to determine tolerancevalue using single ceramic cup. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2737-2742. ISSN 1819-6608

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Wong, Gao Jie and Bahar, Mohd Bazli and Sulaiman , Marizan and Mat Ibrahim, Masrullizam and Zainal Abidin, Amar Faiz (2016) Quality checking and inspection based on machine vision technique to determine tolerance value using single ceramic cup. ARPN Journal Of Engineering And Applied Sciences, 12 (8). pp. 2737-2742. ISSN 1819-6608

Mohd Ali, Nursabillilah and Karis, Mohd Safirin and Ali, Mohd Azamuddin and Samsudin, Muhamad Raimi Sadiq and Selamat, Nurasmiza and Mohd Saad, Wira Hidayat and Zainal Abidin, Amar Faiz and Rizman, Zairi Ismael (2018) Guide Sign Analysis Of Traffic Sign Data-Set Using Supervised Spiking Neuron Technique. International Journal Of Engineering & Technology, 7 (3.14). pp. 221-226. ISSN 227-524X

Mohd Amman, Rosmia and Halim, Mohd Faizal and Dhar Malingam, Sivakumar and Abu Shah, Ismail (2016) Influences of thickness and geometrical change from draw forming in quasi-static axial compression simulation. International Review on Modelling & Simulations, 9 (6). pp. 442-449. ISSN 1974-9821

Mohd Amran, Md Ali and Siti Salmah, Mohd Sani and Zulkeflee, Abdullah and Liew, Pay Jun and Mohd Razali, Muhamad and Raja Izamshah , Raja Abdullah and Mohd Hadzley, Abu Bakar and Abu , Abdullah and Zolkarnain, Marjom (2015) Effect Of Different Coolant Medium On Warpage Deflection Using Moldflow Insight Analysis. Applied Mechanics And Materials, 761. pp. 42-46. ISSN 1662-7482

Mohd Annuar, Khalil Azha and Ab Hadi, Nik Azran and Subramaniam, Siva Kumar and Mohd Ab Halim, Mohd Firdaus and Nor Shah, Mohd Badril and Kadmin, Ahmad Fauzan and Mohd Noh, Mohd Syahrin Amri and Abdul Salam, Azuki (2017) Intelligent Image Capturing Alarm System Using Raspberry Pi. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (4). pp. 1651-1658. ISSN 1693-6930

Mohd Annuar, Khalil Azha and Mohd Ab Halim, Mohd Firdaus and Harun, Mohamad Haniff and Ab Hadi, Nik Azran (2018) An Analysis Of The Beneficial Of Energy Saving Device. ARPN Journal Of Engineering And Applied Sciences, 13 (8). pp. 2912-2915. ISSN 1819-6608

Mohd Annuar, Khalil Azha and Ab Hadi, Nik Azran and Mohamad Sapiee, Mohd Razali and Harun, Mohamad Haniff and Saadon, Intan Mastura (2018) Implementation Of PS2 Remote Control And Monitoring System For Android Operating System Based Robot Platform. Journal Of Engineering And Applied Sciences, 13. pp. 1851-1858. ISSN 1816-949X

Mohd Annuar, Khalil Azha and Fahmi, Muhammad and Quah, Jit Shen (2018) Efficient Object Isolation In Complex Environment Using Manipulation Primitive On A Vision Based Mobile 6DOF Robotic Arm. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 18. pp. 50-56. ISSN 2227-2771

Mohd Annuar, Khalil Azha and Harun, Mohamad Haniff and Nor Azmi, Muhammad Wahyuddin and Mohd Aras, Mohd Shahrieel and Azlan, Umar Al-Amani and Azahar, Arman Hadi and Mohd Ab Halim, Mohd Firdaus and Yaakub, Muhamad Faizal and Zainal Abidin, Amar Faiz (2018) A Study On The Potential Of Peltier In Generating Electricity Using Heat Loss At Engine And Exhaust Vehicle. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 49 (1). pp. 77-84. ISSN 2289-7879

Mohd Aras, Mohd Shahrieel (2016) Introducing A New Research Group - Underwater Technology Research Group (UTERG). BULETIN RICE@UTEM (EDISI KEDUA), 2 (-). p. 21. ISSN -

Mohd Aras, Mohd Shahrieel and Abdul Azis, Fadilah and Abdullah, Shahrum Shah and Lee, Dai Cong and Lim , Wee Teck and Ali, Fara Ashikin and Othman, Muhammad Nur (2015) Study On The Effect Of Shifting 'Zero' In Output Membership Function On Fuzzy Logic Controller Of The Rov Using Micro-Box Interfacing. Jurnal Teknologi, 74 (9). pp. 119-128. ISSN 0127-9696

Mohd Aras, Mohd Shahrieel and Abdullah, Shahrum Shah and Abdul Azis, Fadilah (2015) Review On Auto-Depth Control System For An Unmanned Underwater Remotely Operated Vehicle (ROV) Using Intelligent Controller. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 7 (1). pp. 47-55. ISSN 2180-1843

Mohd Aras, Mohd Shahrieel and Abdullah, Shahrum Shah and Abdul Azis, Fadilah and Mohd Zambri, Mohd Khairi and Md Basar, Mohd Farriz (2015) Auto Depth Control For Underwater Remotely Operated Vehicles Using A Flexible Ballast Tank System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 7 (1). pp. 57-67. ISSN 2180-1843

Mohd Aras, Mohd Shahrieel and Aripin, Muhamad Khairi and Harun, Mohamad Haniff and Husni @ Rusli, Ahmad Faiez and Sulaiman, Marizan and Nor Azmi, Muhammad Wahyuddin and Rizman, Z. I. (2018) An Improved Of Dual Single Input Fuzzy Logic Controller For Underwater Remotely Operated Vehicle (ROV) – Depth Control. Journal Of Fundamental And Applied Sciences, 10 (3S). pp. 951-966. ISSN 1112-9867

Mohd Aras, Mohd Shahrieel and Boon, Pei Teow and Ai, Kee Teoh and Pei, Kee Lee and Mohamed Kassim, Anuar and Harun, Mohamad Haniff and Mohd Zambri, Mohd Khairi and Khamis, Alias (2017) Evaluation And Analysis Of Pid And Fuzzy Control For AUV-YAW Control. Journal of Theoretical and Applied Information Technology, 95 (17). pp. 4256-4364. ISSN 1992-8645

Mohd Aras, Mohd Shahrieel and Kamarudin, Muhammad Nizam and Zainal, Iktisyam and Mohd Zambri, Mohd Khairi and Sulaiman, Marizan (2017) Analysis Of Integrated Sensor For Unmanned Underwater Vehicle Application. Indian Journal Of Geo-Marine Sciences, 46 (12). pp. 2552-2561. ISSN 0379-5136

Mohd Aras, Mohd Shahrieel and Khor, Li Zhe and Aripin, Muhamad Khairi and Tan, Pheng Chaing and Mohd Shah, Hairol Nizam and Khamis, Alias and Nordin, Nurdiana and Ab Rashid, Mohd Zamzuri (2019) Design Analysis And Modelling Of Autonomous Underwater Vehicle (AUV) Using CAD. Indian Journal Of Geo-Marine Sciences, 48 (7). pp. 1081-1090. ISSN 0379-5136

Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Abdul Azis, Fadilah and Ab Rashid, Mohd Zamzuri and Kamarudin, Muhammad Nizam (2015) System Identification Modelling Based On Modification Of All Terrain Vehicle (ATV) Using Wireless Control System. Journal of Mechanical Engineering and Sciences (JMES), 9 (-). pp. 1640-1654. ISSN 2289-4659

Mohd Aras, Mohd Shahrieel and Sulaiman, Marizan and Yeoh, Eik Keong and Kasno, Mohammad `Afif and Mohamed Kassim, Anuar and Khamis, Alias (2017) Performance Analysis Of PID And Fuzzy Logic Controller For Unmanned Underwater Vehicle For Depth Control. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3-2). pp. 59-63. ISSN 2180-1843

Mohd Aras, Mohd Shahrieel and Sulaiman , Marizan and Talib, Md Hairul Nizam and Khamis, Alias and Mohd Nor, Mohd Arif and Mohd Zambri, Mohd Khairi (2015) UTeM Renewable Energy Showcase (URE). International Journal On Information Technology (I.R.E.I.T) , 3 (4). pp. 102-107. ISSN 2281-2911

Mohd Aras, Mohd Shahrieel and Hanaffi, Farhan and Kamarudin, Muhammad Nizam and Md. Rozali, Sahazati and Mohd Zambri, Mohd Khairi and Hairi, Mohd Hendra (2018) Realization Of Real-Time Hardware-In-The-Loop For A Liquid Level With Open-Loop Ziegler Nichols Technique. International Journal Of Electrical Engineering And Applied Sciences, 1. pp. 47-51. ISSN 2600 - 7495

Mohd Aras, Mohd Shahrieel and Khalaf, Ashwaq Abdulameer and Sulaiman, Marizan and Ahmed, Dawood Saleem (2016) Tuning methods of PID controller for DC motor speed control. Indonesian Journal of Electrical Engineering and Computer Science, 3 (2). pp. 343-349. ISSN 2502-4752

Mohd Aras, Mohd Shahrieel and Mohd Zambri, Mohd Khairi and Nor Azmi, Muhammad Wahyuddin and Harun, Mohamad Haniff and Bahar, Mohd Bazli and Mohd Shah, Hairol Nizam and Husni, Ahmad Faiez (2018) Comparison of controllers design performance for underwater remotely operated vehicle (ROV) depth control. International Journal Of Engineering & Technology, 7. pp. 419-423. ISSN 2227-524X

Mohd Azfar, Miskam and Syamimi, Shamsuddin and Hanafiah, Yussof and Ilmi, Mohd Ariffin and Abdul Rahman, Omar (2015) A Questionnaire-Based Survey: Therapist's Response On Emotions Gestures Using Humanoid Robot For Autism. 2015 International Symposium On Micro-NanoMechatronics And Human Science (MHS) . pp. 1-7. ISSN 978-1-4673-8216-8

Mohd Azli, Salim and Azma, Putra and Muhd Ridzuan, Mansor and Musthafah, Mohd Tahir and Mohd Zaid, Akop and Mohd Azman, Abdullah (2016) Analysis Of Parameters Assessment On Laminated Rubber-Metal Spring For Structural Vibration. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-12. ISSN 1757-8981

Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ab Rashid, Siti Rosmaniza and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2017) Dielectric Analysis Of Liquid Solvents Using Microwave Resonator Sensor For High Efficiency Measurement. Microwave And Optical Technology Letters, 59 (2). pp. 367-371. ISSN 0895-2477

Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ab Rashid, Siti Rosmaniza and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2017) High-Efficiency Microwave Planar Resonator Sensor Based On Bridge Split Ring Topology. IEEE Microwave And Wireless Components Letters, 27 (6). pp. 545-547. ISSN 1531-1309

Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ruslan, Eliyana and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2016) Microwave fluidic sensor using enhanced coupling peripheral Microstrip split-ring resonator sensor. 2015 IEEE International Conference on Control System, Computing and Engineering (ICCSCE). pp. 72-76. ISSN 978-147998252-3

Mohd Bahar, Amyrul Azuan and Zakaria, Zahriladha and Ruslan, Eliyana and Awang Md Isa, Azmi and Al-Ahnomi, Rammah Ali Hussien (2016) Circular Microfluidic Substrate Integrated Waveguide Resonator Sensor For Materials Characterization. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3217 - 3221. ISSN 1819-6608

Mohd Basri, Mohd Ariffanan and Noordin, Aminurrashid and Mohamed, Zaharuddin (2019) Sliding Mode Control For Altitude And Attitude Stabilization Of Quadrotor UAV With External Disturbance. Indonesian Journal Of Electrical Engineering And Informatics (IJEEI), 7 (2). pp. 203-210. ISSN 2089-3272

Mohd Daud, Mohd Ahadlin (2012) Influence of Polymer Waste (Polyethylene Terephthalate) in Composites Structure Materials. European International Journal of Science and Technology, 1 (3). pp. 15-22. ISSN ISSN: 2304-9393

Mohd Daud, Mohd Ahadlin (2012) Plane Strain Fracture Toughness Determination for Magnesium Alloy. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 4 (2). pp. 45-51. ISSN 2180-1053

Mohd Erdi, Ayob and Jumadi, Abdul Sukor and Mohd Zarar, Mohd Jenu (2016) An Overview On The Measurement Uncertainty Evaluation Of Electromagnetic Compatibility Test. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 7214-7216. ISSN 1819-6608

Mohd Fahmi, Taher and Mohammad Haniff, Harun and Khalil Azha , Mohd Annuar and Mohd Firdaus , Mohd Ab Halim and Mohd Shahrieel, Mohd Aras and Arman Hadi, Azahar and A.F.Z, Abidin (2016) Development Of Autonomous Sweeper Robot For Badminton Court. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 129-133. ISSN 2180-1843

Mohd Fuad, Mohamad Aqil and Ab Ghani, Mohd Ruddin and Ghazali, Rozaimi and Sulaima, Mohamad Fani and Jali, Mohd Hafiz and Sutikno, Tole and Ahmad Izzuddin, Tarmizi and Jano, Zanariah (2017) A Review On Methods Of Identifying And Counting Aedes Aegypti Larvae Using Image Segmentation Technique. TELKOMNIKA (Telecommunication Computing Electronics And Control), 15 (3). pp. 1199-1206. ISSN 1693-6930

Mohd Hafiz, Jali and Ahmad Izzuddin, Tarmizi and Zul Hasrizal, Bohari and Hazriq Izzuan, Jaafar and Mohamad Na'im, Mohd Nasir (2016) Pattern Recognition Of EMG Signal During Load Lifting Using Artificial Neural Network (ANN). 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 172-177. ISSN 978-147998252-3

Mohd Hafiz, Sulaiman and Sani Irwan, Md Salim and Masrullizam, Mat Ibrahim (2016) Implementation On UTeMRISC Microcontroller With Embedded Fault-Tolerance. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6339-6343. ISSN 1819-6608

Mohd Hisham, Nordin and Kalaiselvan , Selvaraju and M., Fathullah (2016) Increasing ABB FlexPicker Robot’s Degree Of Freedom (DOF) Using Flexible End Effector. MATEC Web Of Conferences, 78 (01056). pp. 1-8. ISSN 2261-236X

Mohd Ibrahim, Imran and Abd Rahman, Tharek and Zakaria, Zahriladha (2016) 26 Ghz Open Ended Air Gap Cavity Rlsa Antenna For Next Generation Broadband Wireless Access. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (4). 21 - 24. ISSN 2289-8131

Mohd Ishak, Noordiana and Dhar Malingam, Sivakumar and Mansor, Muhd Ridzuan (2017) Weighting of natural fibre criteria for fibre metal laminate using entropy method for car front hood utilization. Key Engineering Materials, 740. pp. 75-80. ISSN 1662-9795

Mohd Johar, Fauzi and Azmin, Farah Ayuni and Shibghatullah, A. S. and Suaidi, Mohd Kadim and Ahmad, Badrul Hisham and Salleh, Siti Nadzirah and Abd Aziz, M. Z. A and Md Shukor, Mahfuzah and Liew, Voon Bin and Wong, Wei Yang (2014) Application of Genetic Algorithm for the Optimization of Energy Saving Glass Coating Structure Design. Advanced Science Letters. 00. ISSN 19366612 (Submitted)

Mohd Khairy, Ismail and Azmi, Awang Md Isa and Mohd Nor, Husain and Muhammad Syahrir, Johal and Mohd Riduan, Ahmad (2016) Design And Development Of Modified-Proportional Fair Scheduler For LTE/LTE-Advanced. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3280-3285. ISSN 1819-6608

Mohd Narizee, Mohd Nasir and Laurent, Mezeix and Yulfian, Aminanda and M. A., Seman and Ahmad, Rivai and K. M., Ali (2016) Spring-Back Simulation Of Unidirectional Carbon/Epoxy L-Shaped Laminate Composites Manufactured Through Autoclave Processing. IOP Conference Series: Materials Science And Engineering, 114. pp. 1-11. ISSN 1757-8981

Mohd Nasir, Haslinah and Mohamed Aminuddin, Mai Mariam (2014) The Design Of Self Starting Regulator Using Step-Up Converter Topology For WSN Application. WSEAS Transactions On Circuits And Systems, 13. pp. 291-295. ISSN 1109-2734

Mohd Nasir, Haslinah and Mohamed Aminuddin, Mai Mariam (2014) Efficient Low Voltage Amplification Using Self Starting Voltage Regulator For Storage System. International Journal Of Engineering And Technology (IJET), 6 (5). pp. 2465-2471. ISSN 2319-8613

Mohd Nizam, Sudin and Shamsul Anuar, Shamsudin and Mohd Azman, Abdullah (2016) Effect Of Part Features On Dimensional Accuracy Of FDM Model. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8067-8072. ISSN 1819-6608

Mohd Noh, Mohd Syahrin Amri and Wagiman, Mohammad Ikhwan Shah and Kadmin, Ahmad Fauzan and Zakaria, Zahriladha (2019) Development Of Residential Energy Harvesting System With Arduino Application. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC), 11 (2). pp. 55-58. ISSN 2180-1843

Mohd Noor, Faza Syahirah and Zakaria, Zahriladha and Lago, Herwansyah and Meor Said, Maizatul Alice (2019) Dual-Band Aperture-Coupled Rectenna For Radio Frequency Energy Harvesting. International Journal Of RF And Microwave Computer-Aided Engineering, 29 (1). pp. 1-9. ISSN 1096-4290

Mohd Nor, Rozilawati and Md Rozali, Sahazati and Chong, Shin Horng (2018) Positioning Control And Operational Evaluation Of A One Mass Rotary System Using NCTF Controller. International Journal Of Engineering & Technology, 7. pp. 111-115. ISSN 2227-524X

Mohd Qadafie, Ibrahim and Nurulhalim, Hassim and Ahmad Anas, Yusof and Siti Zulaikha , Abdul Mutalib (2015) Direct Modelling CAD Technology Comparative Review In Efficiency And Productivity For Product Development Process. Applied Mechanics And Materials, 786. pp. 305-310. ISSN 1662-7482

Mohd Riduan, Ahmad and Mona Riza, Mohd Esa (2016) The Estimation of Power Flux of Microwave Radiation From a Negative Narrow Bipolar Pulse at Low Earth Orbit Satellite Altitude. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 115-119. ISSN 2180-1843

Mohd Rosli, ZULKIFLI and Kwan, Wai Loon and Jariah, Mohamad Juoi and nafarizal, nayan and Zainab , Mahamud (2012) Effect of Grain Size on the Corrosion Behavior of TiAlBN Nanocomposite Coating. Solids and Structures (SAS). pp. 10-15. ISSN 2327-1728

Mohd Rosli, ZULKIFLI and Mahamud, zainab and Wai Loon, Kwan and Jariah, Mohamad Juoi and Lau, K.T. (2014) Chemical Composition Analysis of TiAlBN Nanocomposite Coating Deposited via RF Magnetron Sputtering. Key Engineering Materials. pp. 551-555. ISSN 1013-9826

Mohd Rosli, ZULKIFLI and Pauline, lim and Nafarizal, nayan and Zainizan, sahdan and samsul haimi, dahlan and zuhairah, zainal abidin and yusuf, ismail and fauziahanim, che seman and mohd kadim, suadi and mohd fauzi, johar and Jariah, Mohamad Juoi and ghaffer, kiani (2014) Optimization of transmission lost for energy saving glass with different sheet resistance values. Advanced Materials Research. pp. 233-236. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and Zainab , Mahamud and Jeefferie, Abd Razak and masrom, kadir (2012) Effect of PEG Molecular Weight on the TiO2 Particle Structure and TiO2 Thin Films Properties. Advanced Materials Research. pp. 76-80. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and ayoob, N.F and Jariah, Mohamad Juoi and rosli, N.R (2011) Caharacterisation and properties of sintered glass-ceramics produced from recycling glass by using pressure-less method Characterisation and Properties of sintered Glass-Ceramics Produced from recycling Glass by using Presurre-less Method. Key Engineering Materials. pp. 933-938. ISSN 1013-9826

Mohd Rosli, ZULKIFLI and halim, z and azizi, mat yajid and ali, R (2014) Investigation of Intermetallic Phase Formation and Structural Analysis in Annealed Al/Cu Bilayer Thin Films. Advanced Materials Research. pp. 221-225. ISSN 1022-6680

Mohd Rosli, ZULKIFLI and yusliza, yusuf and Jariah, Mohamad Juoi and Zainab , Mahamud and Kwan, Wai Loon (2013) Ti6Al4V Surface Hardness Improvement by Duplex Coating. Advanced Materials Research. pp. 370-374. ISSN 1022-6680

Mohd Rosli, z.m.rosli and Zainab , Mahamud and Jariah, Mohamad Juoi and Nafarizal, Nayan and Kwan, Wai Loon and Yusliza, Yusuf and Hairul Effendy, Maulud (2013) Corrosion behavior of AZ91 Mg-Alloy coated with AlN and TiN in NaCl and Hank’s solution. Advanced Materials Research. pp. 275-279. ISSN 1022-6680

Mohd Rosli, Mohd Afzanizam and Mat, Sohif and Sopian, Kamauzzaman and Salleh, Elias and Sharif, Mohd Khairul Anuar (2018) Experimental Development To Determine Time Constant For Polymer Collector. ARPN Journal of Engineering and Applied Sciences, 14. pp. 1523-1527. ISSN 1819-6608

Mohd Rosli, Mohd Afzanizam and Mohd Zaki, Danial Shafiq and Abdul Rahman, Fatiha and Sepeai, Suhaila and Abdul Hamid, Nurfaizey and Nawam, Muhammad Zaid (2019) F-Chart Method For Design Domestic Hot Water Heating System In Ayer Keroh Melaka. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 56 (1). pp. 59-67. ISSN 2289-7879

Mohd Rosli, Mohd Afzanizam and Abdullah, Amira Lateef and Misha, Suhaimi and Tamaldin, Norreffendy and Sachit, F. A. (2018) Photovoltaic Thermal /Solar (PVT) Collector (PVT) System Based On Fluid Absorber Design : A Review. Advanced Research In Fluid Mechanics And Thermal Sciences, 48. pp. 196-208. ISSN 2289-7879

Mohd Rosli, ZULKIFLI and Yusuf, Y. and Juoi, J. M. and Kwan, Wai Loon and Zainab , Mahamud (2013) Effects of Process Temperature and Time on the Properties of Microwave Plasma Nitrided Ti-6Al-4V Alloy. Pertanika J. Sci. & Technol. pp. 45-58. ISSN 0128-7680

Mohd Rozar, Norlinda and Wan Mahmood, Wan Hasrulnizzam and Ibrahim, Abdullah and Razik, Md Ashlyzan (2015) A Study of Success Factors in Green Supply Chain Management in Manufacturing Industries in Malaysia. Journal of Economics, Business and Management, 3 (2). pp. 287-291. ISSN 1793-8201

Mohd Sa'at, Fatimah Al-Zahrah and Cho, Wei Yang (2016) Oscillatory Flow Across Plates With Different Shape Of Edges. JOURNAL OF MECHANICAL ENGINEERING AND TECHNOLOGY (JMET), 8. pp. 77-91. ISSN 2180-1053

Mohd Saad, Norhashimah and Abu Bakar, Syed Abdul Rahman Syed and Muda, Ahmad Sobri and Mokjib, Musa Mohd (2015) Review Of Brain Lesion Detection And Classification Using Neuroimaging Analysis Techniques. Jurnal Teknologi, 74 (6). pp. 73-85. ISSN 2180–3722

Mohd Saad, Norhashimah and Mohd Noor, Nor Shahirah and Abdullah, Abdul Rahim and Ooi, Yi Fong and Abdul Rahman, Nor Nabilah Syazana (2017) Real-Time LCD Digit Recognition System. Indonesian Journal Of Electrical Engineering And Computer Science, 6 (2). pp. 402-411. ISSN 2502-4752

Mohd Saad, Norhashimah and Abu-Bakar, Syed A.R. and Muda, A.F. and Muda, Sobri and Ahmad Radzi, Syafeeza (2014) Automatic Brain Lesion Detection And Classification Based On Diffusion-Weighted Imaging Using Adaptive Thresholding And A Rule-Based Classifier. International Journal of Engineering and Technology (IJET), 6. pp. 2685-2697. ISSN 0975-4024

Mohd Saad, Wira Hidayat and Abd Salam, Nurul Akmal and Tan, Kien Leong and Baharom, Siti Nor Atikah (2014) Verification of heart rate monitor using PPG pulse sensor. International Journal of Applied Engineering Research, 9 (24). pp. 24369-24378. ISSN 0973-4562

Mohd Saad, Wira Hidayat and Abd. Razak, Muhd. Shah Jehan and Tan, Yun Shen and Abd Salam, Nurul Akmal and Salehuddin, Fauziyah and Wong, Yan Chiew (2017) Implementation Of Continuous Wearable Low Power Blood Glucose Level Detection Using GSR Sensor. -. pp. 1-5. ISSN -

Mohd Safwan, Mohamad and Hidayat, Zainuddin and Sharin, Ab Ghani and Imran, Sutan Chairul (2015) AC Breakdown Voltage Of Natural Ester Mixed With Iron Oxide For Oil-Immersed Power Transformer Application. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 16-20. ISSN 978-146739572-4

Mohd Salleh, Nurhashikin and Selamat, Siti Rahayu and Saaya, Zurina and Ahmad, Rabiah and Mas'ud, Mohd Zaki (2016) Identifying Cyber Violent Extremism (CYBER-VE) Components By Exploring Dark Web. International Journal of Computer Science and Information Security, 14 (9). pp. 52-61. ISSN 1947-5500

Mohd Salleh, Siti Hasmah and Othman, Mohd Azlishah and Ali, Nadhirah and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Abd Aziz, Mohamad Zoinol Abidin (2015) Microwave Imaging Technique Using UWB Signal For Breast Cancer Detection. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 723-727. ISSN 1819-6608

Mohd Sanusi, Azmi and Muda, A. K. and Khadijah Wan, Mohd Ghazali (2013) Features Extraction of Arabic Calligraphy using extended Triangle Model for Digital Jawi Paleography Analysis. International Journal of Computer Information Systems and Industrial Management Applications. pp. 696-703. ISSN 2150-7988

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Aras, Mohd Shahrieel and Mohd Ali, Nursabillilah and Wasbari, Faizil and Abu Bakar, Mohd Nor Fakurazy (2018) Design And Develop An Autonomous UAV Airship For Indoor Surveillance And Monitoring Applications. International Journal On Informatics Visualization, 2 (1). pp. 1-7. ISSN 2549-9610

Mohd Shah, Hairol Nizam and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Aras, Mohd Shahrieel and Mohd Ali, Nursabillilah and Wasbari, Faizil and Tengku Anuar, Tengku Muhammad Mahfuz (2017) Sign Detection Vision Based Mobile Robot Platform. Indonesian Journal Of Electrical Engineering And Computer Science, 7 (2). pp. 524-532. ISSN 2502-4752

Mohd Shah, Hairol Nizam and Kamis, Zalina and Shukor, Ahmad Zaki and Baharon, Mohd Rizuan and Sulaiman, Marizan and Wan Azahari, Wan Nur Farhana (2019) Optimum utilization of energy consumption in arm robot. Modern Applied Science, 13 (5). pp. 57-69. ISSN 1913-1844

Mohd Shah, Hairol Nizam and Kamis, Zalina and Sulaiman, Marizan and Ab Rashid, Mohd Zamzuri and Mohd Aras, Mohd Shahrieel and Ahmad, Azhar (2019) Characteristics Of Butt Welding Imperfections Joint Using Co-Occurrence Matrix. Indian Journal Of Geo-Marine Sciences (IJMS), 48 (7). pp. 1164-1169. ISSN 0379-5136

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Shukor, Ahmad Zaki and Kamis, Zalina and Ab Rashid, Mohd Zamzuri (2017) Vision Based For Classification Of MIG Butt Welding Joint Defect Using Occurrence Matrices And Gray Absolute Histogram. International Journal Of Mechanical & Mechatronic Engineering (Ijmme), 17 (5). pp. 60-66. ISSN 2227-2771

Mohd Shah, Hairol Nizam and Sulaiman, Marizan and Ab Rashid, Mohd Zamzuri and Kamis, Zalina and Mohd Ali, Nursabillilah and Mohd Aras, Mohd Shahrieel and Wasbari, Faizil and Omar, Zakarya Ali Ahmed (2017) A 3D Mapping Of The Surrounding Object Using Stereo-Vision Technique. International Journal of Soft Computing and Engineering (IJSCE), 12 (1). pp. 59-65. ISSN 1816-9503

Mohd Shahadan, Mohd Suan and Mohd Rafie, Johan (2016) Synthesis Of Y1-xAlxBa2Cu3O7-δ Via Combustion Route: Effects Of Al2O3 Nanoparticles On Superconducting Properties. Physica B: Condensed Matter. pp. 1-18. ISSN 0921-4526

Mohd Shahrieel, Mohd Aras and Mohd Khairi, Mohd Zambri and Fadilah, Abdul Azis and Shahrum Shah, Abdullah and Anuar, Mohamed Kassim (2016) Design And Development Of Underwater Robot For Cleaning Process. Journal of Advanced Manufacturing Technology (JAMT), 10 (1). pp. 1-12. ISSN 1985-3157

Mohd Shahrieel, Mohd Aras and Muhammad Nizam, Kamarudin and Muhammad Hanif, Che Rusli and Muhammad Iktisyam, Mohd Zainal (2016) Small Scale Unmanned Underwater Remotely Operated Crawler (ROC). TELKOMNIKA Indonesian Journal of Electrical Engineering, 3 (3). pp. 1-8. ISSN 2302-4046

Mohd Shahrieel, Mohd Aras and Shahrum Shah, Abdullah and Siti Yasmin, Othman and Marizan, Sulaiman and Mohd Farriz, Md Basar and Mohd Khairi, Mohd Zambri and Muhammad Nizam, Kamarudin (2016) Fuzzy Logic Controller For Depth Control Of Underwater Remotely Operated Vehicle. Journal Of Theoretical And Applied Information Technology, 91 (2). pp. 275-288. ISSN 1992-8645

Mohd Shakir, Md Saat and Ong, Zhen Guat and Farah Khalidah, Abdul Rahman and Azmi, Awang Md Isa and Abdul Majid, Darsono (2016) Development Of Wireless Power Transfer Using Capacitive Method For Mouse Charging Application. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 460-471. ISSN 2088-8694

Mohd Suan, Mohd Shahadan and Ahmad, Nurulnabilah and Ismail, Syahriza and A. Bakar, F. I. (2018) Synthesis Of a Fe2o3 Nanowires/MWCNTS Composite For Photocatalyst. Journal of Physics: Conference Series, 1082. 012048. ISSN 1742-6596

Mohd Sultan, Juwita and Markarian, Garik and Benachour, Phillip (2015) Integration of WiFi and WiMAX services: Bandwidth optimization and traffic combination. International Journal Web Applications, 7 (3). pp. 95-108. ISSN 0974-7710

Mohd Sultan, Juwita and Markarian, Garik and Jackson, James (2017) Hybrid WiFi And WiMAX In Disaster Management For PPDR Services. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (3). pp. 61-65. ISSN 2180-1843

Mohd Sultan, Juwita and Markarian, Garik and Benachour, Philip (2018) Analysis of BE and rtPS QoS in WiFi network. Armenian Journal Of Pyhsics, 11. pp. 309-321. ISSN 1829-1171

Mohd Tumari, Mohd Zaidi and Abd Rashid, Wan Norhisyam and Ab Hadi, Nik Azran and Ahmad, Mohd Ashraf and Suid, Mohd Helmi and Ghazali, Mohd Riduwan (2018) Liquid Slosh Suppression By Using Hybrid Model-Free Fuzzy-PID Controller With Derivative Filter. Journal Of Advanced Research In Dynamical And Control Systems, 10spec. pp. 1423-1433. ISSN 1943-023X

Mohd Tumari, Mohd Zaidi and Mohd Nasir, Muhamad Azidi and Saat, Shahrizal and A Subki, A Shamsul Rahimi and Abd Rashid, Wan Norhisyam and Suid, Mohd Helmi and Ghazali, Mohd Riduwan (2018) The Control Schemes Of Vehicle Steer By Wire System By Using Fuzzy Logic And Pid Controller. Research Journal Of Applied Sciences, 13 (2). pp. 137-145. ISSN 1815-932X

Mohd Yassim, Halyani and Hussin, Mohamed Saiful Firdaus and M. S., Azizi and A., Tajul and R. F., Farhana (2016) Modeling And Simulation Of Wind Turbine For Partial Load Operation. ARPN Journal Of Engineering And Applied Sciences, 11 (8). pp. 4934-4941. ISSN 1819-6608

Mohd Yassim, Halyani and Hussin, Mohamed Saiful Firdaus and Mohd Ali, Nursabillilah and Fauzi, Muhammad Ashraf and Ismail, Zulkefli and Rosli, Fatin Farhana (2019) Conceptual Design Approach And Ergonomics Analysis Of Fire Resistant Purpose Shield. ARPN Journal Of Engineering And Applied Sciences, 14 (6). pp. 1264-1268. ISSN 1819-6608

Mohd Yusof, Norfadzlia and Zulkifli, Mohd Faizal and Mohd Yusof, Nor Yusma Amira and Azman, Azziana Afififie (2018) Smart Waste-Bin With Real-Time Monitoring System. International Journal Of Engineering And Technology(UAE), 7. pp. 725-729. ISSN 2227-524X

Mohd Zaini, Jamaludin and Safarudin Gazali , Herawan and Yusmady , Mohamed Arifin and Fauzi, Ahmad (2014) Performance Comparison Between Diesel Fuel And Biodiesel Using A Low Cost Single Cylinder Diesel Engine Dynamometer. Applied Mechanics And Materials, 554. 505 - 509. ISSN 1662-7482

Mohd Zaki, Mas'ud and Shahrin, Sahib and Mohd Faizal, Abdollah and Siti Rahayu, Selamat and Robiah, Yusof (2016) An Evaluation Of N-gram System Call Sequence In Mobile Malware Detection. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3122-3126. ISSN 1819-6608

Mohd Zaki , Yusup and Wan Hasrulnizzam , Wan Mahmood and Mohd Rizal , Salleh and Mohd Razali , Muhamad (2014) The sustainability challenges in the adoption of cleaner production system: a review. Jurnal Teknologi, UTM, 70 (1). pp. 117-123. ISSN 0127-9696

Mohd Zalani, Naziatul Fazilah and Dhar Malingam, Sivakumar and Selamat, Mohd Zulkefli (2016) Tensile properties of woven kenaf fiber reinforced polypropylene hybrid aluminium-composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608

Mohd Zambri, Mohd Khairi and Mohd Aras, Mohd Shahrieel and Khamis, Alias and Hairi, Mohd Hendra (2016) Investigating The Impact Of Photovoltaic Connection To The Malaysian Distribution System. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (7). pp. 23-28. ISSN 2180-1843

Mohd Zubir, Amir and Md Fahmi, Abd Samad (2016) Hardware-In-The-Loop Simulation Of Steer-By-Wire System In Automotive Vehicle. International Journal Of Advanced And Applied Sciences, 3 (9). pp. 51-58. ISSN 2313-626X

Mohmad, Martini and Abdollah, Mohd Fadzli and Tamaldin, Noreffendy and Amiruddin, Hilmi (2017) The Effect Of Dimple Size On The Tribological Performances Of A Laser Surface Textured Palm Kernel Activated Carbon-Epoxy Composite. Industrial Lubrication And Tribology, 69 (5). pp. 768-774. ISSN 0036-8792

Moketar, Nor Aiza and Kamalrudin, Massila and Mohd Yusof, Mokhtar and Sidek, Safiah and Robinson, Mark (2017) A Study Of Generating Abstract Test For Requirement Validation Among Requirement Engineers. Journal Of Theoretical And Applied Information Technology, 95 (7). pp. 1381-81388. ISSN 1992-8645

Muda, A. K. and Yun-Huoy, C. and Muda, N. A. (2011) A Comparative Study of Feature Selection Methods for Authorship Invarianceness in Writer Identification. International Journal of Computer Information Systems and Industrial Management Applications, Volume 4 (2012). pp. 467-476. ISSN 2150-7988

Muhamad, Khairil Amri and Hashim, Nik Mohd Zarifie and Wan Azman, Wan Mohd Syahmi and Mohamad, Nor Hafiza (2014) Digital Images Restoration Application In Digital Signal Processing. International Journal of Emerging Technology & Research, 1 (6). pp. 79-83. ISSN 2347-6079

Muhamad Damanhuri, Amir Abdullah and Abdullah, Muhammad Ilman Hakimi Chua and Lubis, Abdul Munir Hidayat Shah and Zakaria, Muhammad Zulfattah and Hussin, Mohamed Saiful Firdaus and Kasno, Mohammad `Afif (2018) Development Of TEG Peltier Device For Heat Harvesting From 1.5 HP Split Unit Air Conditioning System. International Journal Of Applied Engineering Research, 13 (5). pp. 2390-2394. ISSN 0973-4562

Muhamad Haffiz, Mohd Radzi and Kok, Swee Leong (2016) Fabrication Of BaTiO3 Thick-Film Lead-Free Piezoelectric Ceramic By Using Screen Printing Method. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8787-8793. ISSN 1819-6608

Muhamad Shahirul, Mat Jusoh and Mohd Yazid, Yahya and Nur Izan Syahriah, Hussein (2016) The Effect Of Fibre Layering Pattern In Resisting Bending Loads Of Natural Fibre-Based Hybrid Composite Materials. MATEC Web Of Conferences, 39. 01005-1. ISSN 2261-236X

Muhammad, M and Rasin, Zulhani and Jidin, Auzani (2017) Implementation Of Carrier-Based Simple Boost Pulse Width Modulation (PWM) For Z-Source Inverter (ZSI) Using Field Programming Gate Array (FPGA). IOP Conference Series: Materials Science And Engineering, 226. 012141. ISSN 1757-8981

Muhammad, Mohd Nazrin and Salcic, Zoran and Wang, Kevin I-Kai (2018) Detecting Turns And Correcting Headings Using Low-Cost INS. The Journal Of Navigation, 71 (1). pp. 189-207. ISSN 0373-4633

Muhammad Ilman Hakimi Chua, Abdullah and Mohd Fadzli, Abdollah and Noreffendy, Tamaldin and Hilmi, Amiruddin and Nur Rashid, Mat Nuri (2016) Effect Of Hexagonal Boron Nitride Nanoparticles As An Additive On The Extreme Pressure Properties Of Engine Oil. Industrial Lubrication And Tribology, 68 (4). pp. 441-445. ISSN 0036-8792

Muhammad Nazirul Ifwat, Abd Aziz and Fauziyah, Salehuddin and Anis Suhaila, Mohd Zain and Khairil Ezwan, Kaharudin (2016) Electrical Characteristics Of PMOS Bulk Mosfet And PMOS Silicon-On-Insulator (SOI) MOSFET Device. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6315-6318. ISSN 1819-6608

Muhammad Noorazlan Shah, Zainuddin and Md Nasir, Sulaiman and Norwati, Mustapha and Thinagaran, Perumal (2015) Activity Recognition Based On Accelerometer Sensor Using Combinational Classifiers. 2015 IEEE Confernece On Open Systems (ICOS). pp. 68-73. ISSN 978-146739434-5

Muhammad Said, Nurlaela and Ali, Mohd Basri and Zakaria, Kamarul Ariffin and Mohd Daud, Mohd Ahadlin (2016) Comparison Of Impact Duration Between Experiment And Theory From Charpy Impact Test. MATEC Web Of Conferences, 78 (-). pp. 1-8. ISSN 2261-236X

Muhammad Syafiq, Noor Azizi and Azahari, Salleh and Adib, Othman and Najmiah Radiah, Mohamad and Nor Azlan, Mohd Aris and Maisarah, Abu and Nornikman, Hassan and Mohamad Hafize, Ramli and Thailis Bounya, Ngelayang (2016) UWB Rectangular Slotted Microstrip Patch Antenna In Proximity Of Human Arm Model. Jurnal Teknologi, 78 (5-4). pp. 111-115. ISSN 0127-9696

Muhammad Syafiq, Noor Azizi and Azahari, Salleh and Adib, Othman and Nor Azlan, Mohd Aris and Najmiah Radiah, Mohamad and Maisarah, Abu and Nornikman, Hassan and Mohamad Hafize, Ramli (2016) Non-Ionizing (Ultra-Wideband Frequency) Electromagnetic Radiation Effect On Nerve Fiber Action Potential Of Human Body. Jurnal Teknologi, 78 (5-6). pp. 131-137. ISSN 0127-9696

Muhammad Zuhair Bolqiah, Edris and Mohammed Saeed, Jawad and Zahriladha, Zakaria (2016) Surface Defect Detection And Neural Network Recognition Of Automotive Body Panels. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 117-122. ISSN 978-147998252-3

Muhammad Zuhair Bolqiah, Edris and Zahriladha, Zakaria and Mohd Shahril Izuan, Mohd Zin and Mohammed Saeed, Jawad (2016) Automated Deform Detection On Automotive Body Panels Using Gradient Filtering And Fuzzy C-Mean Segmentation. Jurnal Teknologi, 78 (6-8). pp. 93-99. ISSN 0127-9696

Muhd Khairi, Abd Rahim and Auzani, Jidin and Fazlli, Patkar and Sundram, Ramahlingam and Yusnida, Ahmad Tarmizi and Huzainirah, Ismail and Siti Azura, Ahmad Tarusan (2016) Minimization Of Torque Ripple And Switching Frequency Utilizing Optimal DTC Switching Strategy For Dual-Inverter Supplied Drive. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 49-54. ISSN 978-146739572-4

Muhd Khairi, Abd Rahim and Auzani, Jidin and Tole, Sutikno (2016) Enhanced Torque Control And Reduced Switching Frequency In Direct Torque Control Utilizing Optimal Switching Strategy For Dual-Inverter Supplied Drive. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 328-339. ISSN 2088-8694

Munawar, Rose Farahiyan and Shahril, M. Khairul and Abu, Maisarah and Bani Hashim, Ahmad Yusairi (2014) Green magnetic wave absorber, the potential of paddy straw and recycled paper. Materials Research Innovations, 18. S6-21. ISSN Print ISSN: 1432-8917 ; Online ISSN: 1433-075X

Mustafa, Ashafi'e and Abdollah, Mohd Fadzli and Amiruddin, Hilmi and Shuhimi, Fairuz Fazillah and Muhammad, Noryani (2017) Optimization Of Friction Properties Of Kenaf Polymer Composite As An Alternative Friction Material. Industrial Lubrication And Tribology, 69 (2). pp. 259-266. ISSN 0036-8792

Mustafa, Nur Hanim and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Malek, F (2014) Energy Monitoring Based On Human Activity In The Workplace. Journal Of Physics : ConferenceSeries, 495 (-). pp. 1-9. ISSN -

Mustafa, Nur Hanim and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Malek, F (2014) A Survey On Human Behavior Towards Energy Efficiency For Office Worker In Malaysia. Journal Of Physics : ConferenceSeries, 495 (-). pp. 1-10. ISSN -

Mustafa, Zaleha and Ishak, Nor Fatiha and Othman, Radzali and Ahmad, Nor Naimah Rosyadah and Abd Rahim, Toibah and Sheikh Md Fadzullah, Siti Hajar and Tanner, K. Elizabeth (2018) In-Vitro Apatite Growth On Porous Â-Tricalcium Phoshpate Scaffolds Coated With PHVB. Journal Of Advanced Manufacturing Technology, 12. pp. 135-146. ISSN 2289-8107

Mustaffa, M. T. and Hashim, Nik Mohd Zarifie and Mohd Saad, Norhashimah and Ab Hadi, Nik Azran and Salleh, Azahari and Ja'afar, Abd Shukur (2015) Biomedical Signal And Image Processing In Matlab. International Journal for Advance Research in Engineering and Technology, 3 (IX). pp. 29-32. ISSN 2320-6802

Musthafah, Mohd Tahir and M.S., Ali and M.A., Salim and Rosli, A. Bakar and Fudhail, Abdul Munir and Muhammad Zahir, Hassan and Abdul Muhaimin, Mohd Shafie (2015) Performance Analysis Of A Spark Ignition Engine Using Compressed Natural Gas (CNG) As Fuel. Energy Procedia, 68. 355 -362. ISSN 1876-6102

Musthaffa, Azrul Affandhi and Mohamad Nor, Norazman and Yusof, Mohammed Alias and Yaakob, Mohd Yuhazri (2018) New Conceptual Design Of Portable Bamboo Bridge For Emergency Purposes. AIP Conference Proceedings, 1930 (1). pp. 1-9. ISSN 0094-243X

Mutalib, M. A and Zakaria, Zahriladha and Shairi , Noor Azwan and Mohamad Isa, Mohd Sa'ari (2016) Microstrip Bandpass Filter With Reconfigurable Notch Response At 5.2 GHz Using Defected Microstrip Structure. Journal Of Telecommunication Electronic And Computer Engineering (JTEC), 8 (5). 75 - 79. ISSN 2289-8131

Mutalib, Mohamad Ariffin and Zakaria, Zahriladha and Sam, Weng Yik and Awang Md Isa, Azmi (2014) Simulation And Analysis Of Compact Defected Microstrip Structure (DMS) With Narrow Bandwidth Notch Characteristics. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 6 (2). pp. 1-4. ISSN 2180-1843

Mutalib, Mohamad Ariffin and Zakaria, Zahriladha and Shairi, Noor Azwan (2017) High Selectivity Microstrip Bandpass Filter Integrate With Ring Resonator Bandstop Filter. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 9 (2-13). pp. 39-42. ISSN 2180-1843

Mutalib, Mohamad Ariffin and Zakaria, Zahriladha and Shairi, Noor Azwan (2016) Microstrip Bandpass Filter With Tunable Notch Response At 5.2 GHz Using Defected Microstrip Structure. International Journal of Applied Engineering Research, 11 (14). 8104 - 8108. ISSN 0973-9769

N., Haniza and M., Zulkiflee and Shibghatullah, Abdul Samad and Sahib, Shahrin (2011) Analysis on Differential Router Buffer Size towards Network Congestion. International Journal of Computer Science and Information Security. pp. 1-5. ISSN 1947-5500

N., Mamat and Kasrul, Abdul Karim and Zulkifilie, Ibrahim and Siti Azura, Ahmad Tarusan (2014) Design And Analysis Of Bearingless Permanent Magnet Synchronous Motor. International Journal Of Energy And Power Engineering Research (IJEPER), 2. pp. 11-16. ISSN 2289-5620

N. M., Nor and Hashim, Nik Mohd Zarifie and S. N., Rosli and Mohamad Zoinol Abidin, Abd Aziz (2014) A Study On Application Digital Filtering For Audio Signal Processing In Digital Signal Processing. International Journal of Emerging Technology & Research, 1 (6). pp. 56-61. ISSN 2347-6079

Nadlene , Razali (2016) The Effects Of Chemical Treatment On The Structural And Thermal,Physical, And Mechanical And Morphological Properties Of Roselle Fiber-Reinforced Vinyl Ester Composites. Polymer Composites. pp. 1-14. ISSN 1548-0569

Nady, Ahmad and Ahmed, Mahmoud Hazzaa M. and Numan, Arshid and T. Subramaniam, Ramesh and Abdul Latiff, Anas and Ooi, Raymond C. H. and Arof, Hamzah and Harun, Sulaiman Wadi (2017) Passively Q-Switched Erbium-Doped Fibre Laser Using Cobalt Oxide Nanocubes As A Saturable Absorber. Journal Of Modern Optics, 64 (13). pp. 1315-1320. ISSN 0950-0340

Nahar, Haniza and Sahib, Shahrin and Muslim, Zulkiflee and Ayop, Zakiah (2013) Network Model Diversity For Wireless Studies. International Journal Of Information And Communication Technology Research, 3 (1). pp. 7-11. ISSN 2223-4985

Nain, A. A. and Hashim, Nik Mohd Zarifie and Mohd Saad, Norhashimah and Abd Hadi, Nik Azran and Salleh, Azahari and Ja'afar, Abd Shukur (2015) Digital Signal Processing : Radio Frequency Applications. International Journal For Advance Research In Engineering And Technology, 3 (IX). pp. 17-19. ISSN 2320-6802

Najmiah Radiah, Mohamad and A.S.A.M, Soh and Azahari, Salleh and Nik Mohd Zarifie, Hashim and Mohamad Zoinol Abidin, Abd Aziz and Nuraishah, Sarimin and Adib, Othman and Z.A, Ghani (2013) Development Of Aquaponic System Using Solar Powered Control Pump. IOSR JOURNAL OF ELECTRONICS AND COMMUNICATION ENGINEERING (IOSR-JEEE), 8. pp. 1-6. ISSN 2320-3331

Najmiah Radiah, Mohamad and Azahari, Salleh and Nik Mohd Zarifie, Hashim and Mohamad Zoinol Abidin, Abd Aziz and Zahriladha, Zakaria (2016) Modeling Of Wireless Energy Transfer Circuit And Implementation Of Wi-Tricity System Control Using Infrared And PIC Microcontroller. International Journal Of Engineering And Technology (IJET), 8 (2). pp. 1285-1294. ISSN 2319-8613

Nasir, Nurulhilmi Zaiedah and Mohd Daud, Mohd Ahadlin and Bapokutty, Omar and Din, Abdul Talib and Selamat, Mohd Zulkefli (2015) Influence of heat treatment on impact, hardness and fatigue strength of 6061 aluminium alloy. Applied Mechanics and Materials , 761 (-). pp. 484-488. ISSN 1662-7482

Nasir, Nurulhilmi Zaiedah and Mohd Daud, Mohd Ahadlin and Selamat, Mohd Zulkefli and Rivai, Ahmad and Dhar Malingam, Sivakumar (2015) The effect of heat treatment on fatigue and mechanical properties of 6061 aluminium alloy. Applied Mechanics and Materials, 699. pp. 227-232. ISSN 1660-9336

Nawam, Muhammad Zaid and Mohd Rosli, Mohd Afzanizam and Rosli, Nor Azwar Syahila (2018) Simulation Study On The Effect Of Rear-Wing Spoiler On The Open Aerodynamic Performance Of Sedan Vehicle. Journal of Advanced Research In Fluid Mechanics And Thermal Sciences, 49 (2). pp. 146-154. ISSN 2289-7879

Nazan, Muhammad Afdhal and Ramli, Faiz Redza and Alkahari, Mohd Rizal and Sudin, Mohd Nizam and Abdullah, M. A. (2017) Process Parameter Optimization Of 3D Printer Using Response Surface Method. ARPN Journal Of Engineering And Applied Sciences, 12 (7). pp. 2291-2296. ISSN 1819-6608

Naziatul Fazilah, Mohd Zalani and Sivakumar, Dhar Malingam and Mohd Zulkefli, Selamat (2016) Tensile Properties Of Woven Kenaf Fiber Reinforced Polypropylene Hybrid Aluminium-Composite. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7823-7827. ISSN 1819-6608

Nazir Ali, Nornazurah and Aman, Aminudin and Abd Razak, Jeefferie and Zakaria, Zahriladha and Zainuddin, Hidayat (2017) Optimization Of Surface Resistivity And Relative Permittivity Of Silicone Rubber For High Voltage Application Using Response Surface Methodology. Journal Of Electrical Systems, 13 (2). pp. 211-227. ISSN 1112-5209

Nazreen, Waeleh and Zanariah, Abdul Majid (2016) A 4-Point Block Method For Solving Higher Order Ordinary Differential Equations Directly. International Journal Of Mathematics And Mathematical Sciences, 2016. pp. 1-8. ISSN 0161-1712

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Bapokutty, Omar and Subramonian, Sivarao (2017) Influence of kenaf fibre orientation effect on the mechanical properties of hybrid structure of fibre metal laminate. Pertanika Journal of Science & Technology, 25 (S5). pp. 1-8. ISSN 0128-7680

Ng, Lin Feng and Dhar Malingam, Sivakumar and Zakaria, Kamarul Ariffin and Selamat, Mohd Zulkefli (2017) Fatigue performance of hybrid fibre metal laminate structure. International Review of Mechanical Engineering, 11 (1). pp. 61-68. ISSN 1970-8734

Ng, Xue Yan and Basari, Amat Amir and Kok, Swee Leong and Ahmad Nawir, Nur Amalina and Seiji, Hashimoto (2018) Evaluation of interfaced plate parameters on impact-based piezoelectric power generation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2). pp. 109-118. ISSN 2180-1843

Nik Azran, Ab Hadi (2016) Implementation And Effect Of Sensor Technology In Building Level Balancer Using Programmable Integrated Circuit Microcontroller. International Journal For Advance Research In Engineering And Technology, 3 (1). pp. 13-17. ISSN 2320-6802

Nik Azran , Ab Hadi (2014) Development Of High Performance And Low Cost Automatic Toll Payment System Using Rfid Technology For Malaysia Environment. International Journal For Advance Research In Engineering And Technology, 2. pp. 1-7. ISSN 2320-6802

Nik Mohd Salleh, Nik Muhammad Farid and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Nirmal, Umar and Albawab, Tarek Mhd Moataz and Halim, Isa and Ahmed Salem, Mohammed and Elsayed, Mahmoud and Singh, Jasspeed (2018) A review on tribological wear test rigs for various applications. International Journal Of Integrated Engineering, 10. pp. 202-217. ISSN 2600-7916

Nirmal, Umar and Megat Ahmad, Megat Muhammad Hamdan and Yaakob, Mohd Yuhazri and Amir Mohamed, Kamarul (2018) Degradation Behaviour Of Treated Betelnut Fibres Reinforced Polyester Composites For Tribological Applications. World Review Of Science, Technology And Sustainable Development, 14 (2/3). pp. 180-227. ISSN 1741-2242

Nizam Uddin, Ahamed and Mahdi, Alqahtani and Omar, Altwijri and Matiur, Rahman and Kenneth, Sundaraj (2016) Age-Related EMG Responses Of The Biceps Brachii Muscle Of Young Adults. Biomedical Research, 27 (3). pp. 787-793. ISSN 0970-938X

Nj., Mohamed and Sahib, Shahrin and Suryana, Nanna and Hussin, B. (2017) RTS/CTS Framework Paradigm and WLAN QoS Provisioning Methods. International Journal Of Advanced Computer Science And Applications (IJACSA), 8 (2). pp. 176-186. ISSN 2158-107X

Noor Azizi, Muhammad Syafiq and Mohd Aris, Nor Azlan and Salleh, Azahari and Othman, Adib and Mohamad, Najmiah Radiah (2015) Non-Ionizing Electromagnetic Radiation Effect On Nerve Fibre Action Potential Of Human Body - A Review. Jurnal Teknologi , 77 (7). pp. 31-36. ISSN 2180-3722

Noor Azwan, Shairi (2013) Simulation and Analysis of Phase Noise Distortion in RF Transceiver of IEEE 802.11 a WLAN Bridge System. International Journal of Recent Technology and Engineering. pp. 28-32. ISSN 2277-3878

Noor Shahida, Mohd Kasim and Rosdiadee, Nordin and Mahamod, Ismail (2016) Dynamic Fractional Frequency Reuse Based On An Improved Water-Filling For Network MIMO. KSII Transactions On Internet And Information Systems, 10 (5). pp. 2124-2143. ISSN 1976-7277

Noor Shahida, Mohd Kasim and Rosdiadee, Nordin and Mahamod, Ismail (2016) Power Allocation For Dynamic Fractional Frequency Reuse (DFFR) In Downlink LTE-A System. 2015 21st Asia-Pacific Conference On Communications, APCC 2015. pp. 12-16. ISSN 978-488552301-4

Nor Azizah, Mohd Yusoff and Kasrul, Abdul Karim and Sharin, Ab Ghani and Fazlli, Patkar and Siti Azura, Ahmad Tarusan and Auzani, Jidin (2016) Analysis Of Multiphase Transformer Supplying A Static And Dynamic Load. ARPN Journal Of Engineering And Applied Sciences, 11 (14). pp. 8987-8991. ISSN 1819-6608

Nor Syaimaa, Mohd Zamil and Hanim, Abdul Razak and Hazura, Haroon and Anis Suhaila, Mohd Zain and Fauziyah, Salehuddin and Siti Khadijah, Idris (2016) The Potential Of Silicon Photonic Device Based On Tapered MMI Structure. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 131-135. ISSN 2180-1843

Noraiham, Mohamad and Mazliah, Mazlan and Jeefferie, Abd Razak and Nur Sharafina, Zainol and Amirul Asyraf, Mat Nasir and Hairul Effendy, Ab Maulod (2016) Compressive Properties Of Green Rubber Foam From Reclaimed Rubber Glove. International Journal of Materials And Product Technology, 53 (3-4). pp. 252-266. ISSN 0268-1900

Norain, Idris (2015) Young Coconut Waste As Biomass Feedstock. CARe Newsletter (1). p. 6. ISSN 2289-9871

Noraini, Mat Ali and Kok, Swee Leong and Ain Atiqa, Mustapha (2016) Experimental Investigation On Piezoelectric And Electromagnetic Hybrid Micro-Power Generator. ARPN Journal Of Engineering And Applied Sciences, 11 (10). pp. 6366-6370. ISSN 1819-6608

Norazman, Farhaneem and Dimin @ Mohd Amin, Mohd Fairuz and Shaaban, Azizah and Mohamad, Noraiham (2017) Optimization of phosphoric acid treatment biochar using response surface method. Journal Of Advanced Manufacturing Technology (JAMT) , 12 (SI). pp. 453-466. ISSN 1985-3157

Nordin, Khairussakinah and Ali, Nadhirah and Othman, Mohd Azlishah and Abd Aziz, Mohamad Zoinol Abidin and Sulaiman, Hamzah Asyrani (2015) 3.5ghz Of Ice Cream Cone With Bow Tie Antenna For Microwave Imaging Application. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 714-717. ISSN 1819-6608

Nordin, Khairussakinah and Hashim, Nik Mohd Zarifie and Idris, Suhana and Darsono, Abd Majid and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Coherent optical communication systems in digital signal processing. International Journal of Advanced Engineering Research and Technology (IJAERT), 2 (7). pp. 228-232. ISSN 2348-8190

Nordin, Mohd Nur Azmi and Goda, Kohichi and Azhari, Muhamad Haikal and Kenji, Sakamoto and Okamoto, Masaki and Ito, Hirokazu and Endo, Takashi (2018) Tensile and impact properties of pulverized oil palm fiber reinforced polypropylene composites: A comparison study with wood fiber reinforced polypropylene composites. Journal Of Mechanical Engineering And Sciences, 12. pp. 4191-4202. ISSN 2289-4659

Nordin, Mohd Nur Azmi and Makino, Yuta and Goda, Koichi and Ito, Hirokazu (2015) Fatigue Fracture Properties Of Wood Plastic Composites. The Journal Of The Society Of textile Industry, 71. pp. 339-344. ISSN 0037-9875

Nordin, Mohd Nur Azmi and Matsuda, Yuta and Tokuno, K. and Goda, Koichi (2015) Electron Probe Microanalyzer Evaluation Of Fatigue Fracture Surface Of Nanoclay - Epoxy Composite Materials. Journal Of Failure Analysis And Prevention, 15. pp. 445-456. ISSN 1547-7029

Nordin, Nurdiana and Sheng, Quan Xie and Wünsche, Burkhard (2014) Assessment Of Movement Quality In Robot- Assisted Upper Limb Rehabilitation After Stroke:A Review. Journal of NeuroEngineering and Rehabilitation, 11. pp. 1-23. ISSN 1743-0003

Norhafiz, Salim and Takao, Tsuji and Tsutomu, Oyama and Kenko, Uchida (2016) Interface Flow Limit Identification Using Focused Time Delay Network For MEPS Transmission. Smart Grid Technologies - Asia (ISGT ASIA), 2015 IEEE Innovative. pp. 1-6. ISSN 978-150901238-1

Norihan, Abdul Hamid and Majlis, Burhanuddin Yeop and Yunas, Jumril and Ahmad Radzi, Syafeeza and Wong, Yan Chiew and Ibrahim , Mazree (2016) A Stack Bonded Thermo-Pneumatic Micro-Pump Utilizing Polyimide Based Actuator Membrane For Biomedical Applications. Microsystem Technologies, 22 (5). pp. 1-9. ISSN 0946-7076

Norlezah, Hashim and Mohd Amir Hafifi, Abdul Razak and Fakrulradzi , Idris (2015) Home Security System Using Zigbee. Jurnal Teknologi , 74 (10). pp. 29-34. ISSN 2180-3722

Norsiah, Hami and Mohd Razali, Muhamad and Zuhriah, Ebrahim (2016) The Impact Of Sustainable Manufacturing Practices On Sustainability. Jurnal Teknologi, 78 (1). pp. 139-152. ISSN 0127-9696

Nortazi, Sanusi and Azami, Zaharim and Sohif, Mat (2016) Wind Energy Potential: A Case Study Of Mersing, Malaysia. ARPN Journal Of Engineering And Applied Sciences, 11 (12). pp. 7712-7716. ISSN 1819-6608

Nur Azman , Abu and Prajanto Wahyu, Adi and Othman, Mohd (2014) Robust Digital Image Steganography Within Coefficient Difference On Integer Haar Wavelet Transform. International Journal Of Video & Image Processing And Network Security, 14 (2). pp. 1-8. ISSN 2227-2712

Nur Izyan, Zulkafli and Shuhaimi, Mahadzir (2014) Exergy Analysis For Fuel Reduction Strategies In Crude Distillation Unit. Energy , 66. pp. 891-897. ISSN 0360-5442

Nur Raihan, Ramli and Sazalinsyah, Razali and Mashanum, Osman (2015) A Conceptual Model For Multi-Robot Cooperation Inspired By Immune Network Theory And Somatic Hypermutation. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 495-499. ISSN 978-146739572-4

Nur Shazwani, Aminuddin and Syafeeza, Ahmad Radzi and M., Abu and Norihan, Abdul Hamid (2016) A Computer-Based Touch-Less 3D Controller Using Capacitive Sensing Method. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (1). pp. 83-88. ISSN 2180-1843

Nurhashikin, Mohd Salleh and Siti Rahayu, Selamat and Robiah, Yusof and Shahrin, Sahib (2016) Discovering Cyber Terrorism Using Trace Pattern. International Journal Of Network Security, 18 (6). pp. 1034-1040. ISSN 1816-353X

Nurul Ain, Mohd Said and Xiao, Dan and Dutta, Rukmi and Fletcher, John E. (2015) Closed-loop control strategy for PM Machines with non-sinusoidal back-EMFs using dual-inverter open-end winding. IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society. pp. 2998-3003. ISSN 978-147991762-4

Nurul Azuwa, Azmi and Umar Al-Amani, Azlan and Maziati Akmal, Mohd Hatta and Mohd Asyadi ‘Azam, Mohd Abid and Mohd Warikh, Abd Rashid (2016) A Study On (K, Na) NbO3 Thin Films With Optimized Layer: Effect On Physical And Electrical Properties. Key Engineering Materials, 694. pp. 120-124. ISSN 1662-9795

Nurul Izah, Anuar and Adi, Saptari (2016) Performance Evaluation Of Different Types Of Particle Representation Procedures Of Particle Swarm Optimization In Job-Shop Scheduling Problems. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-5. ISSN 1757-8981

Nurul Nadia, Abd Aziz and Hazura, Haroon and Hanim, Abdul Razak (2016) Compact Optical Filter Based On Microring Resonator. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3320-3323. ISSN 1819-6608

Nurzaimah, Zainol and Zahriladha, Zakaria and Maisarah, Abu and Mawarni, Mohamed Yunus (2016) Stacked Patch Antenna Harmonic Suppression At 2.45 GHz For Wireless Power Transfer. 2015 IEEE International Conference On Control System, Computing And Engineering (ICCSCE). pp. 96-100. ISSN 978-147998252-3

Olawale Friday, Ifayefunmi (2016) Buckling Behavior Of Axially Compressed Cylindrical Shells: Comparison Of Theoretical And Experimental Data. Thin-Walled Structures, 98. pp. 558-564. ISSN 0263-8231

Omar, Mohamad Syarafuddin and Jaafar, Hazriq Izzuan and Ghazali, Rozaimi and Mohamad, Syahrul Hisham and Khalil Azha , Mohd Annuar (2015) Investigation Of Single Cart Gantry Crane System Performance Using Scheduling Algorithm. International Journal of Soft Computing and Engineering (IJSCE), 4. pp. 134-138. ISSN 2231-2307

Omar, Nooririnah and Raja Mohd Rasi, Raja Zuraidah and Zainudin, Mohd Harris Fadhilah and Azhari, Muhamad Azwar and Yusuf, Yusliza and Mustafa, Nuzaimah and Azlan, Umar Al Amani and Razi, M. H.F.A. and Ismail, Syahriza and Mohamad, S. (2018) Experimental Study Of Welded Joints On Steel Plate Cold-Rolled Sheet Metal Using Different Electrode Tips. Journal of Advanced Manufacturing Technology (JAMT) , 12. pp. 1-16. ISSN 1985-3157

Omar, Rosli and Al-Hiealy, Mohammed Rasheed Jubair and Low, Zheng Kai and Sulaiman, Marizan (2019) Design And Development Of Active Power Filter For Harmonic Minimization Using Synchronous Reference Frame (SRF). ARPN Journal Of Engineering And Applied Sciences, 14 (2). pp. 476-484. ISSN 1819-6608

Omar, Rosli and Rasheed, Mohammed and Sulaiman , Marizan (2015) Harmonic Reduction In Multilevel Inverter Based On Super Capacitor As A Storage. TELKOMNIKA Indonesian Journal of Electrical Engineering, 16. pp. 520-530. ISSN 2302-4046

Omar Fouad, Mohammed and Burairah, Hussin and Abd Samad, Hasan Basari (2016) Operational design and modelling of fire event tracking system in wireless sensor networks. ARPN Journal Of Engineering And Applied Sciences, 11 (13). pp. 8525-8531. ISSN 1819-6608

Ong, Yee Teng and Chong, Shin Horng and Hee, Wai Keat (2015) Positioning Control Of XY Table Using 2DOF PID Controller. Applied Mechanics And Materials, 761. pp. 137-141. ISSN 1662-7482

Ong , Teik Kean and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Suaidi, Mohamad Kadim and Mohamad @ Sulaiman, Hanissah and F, .Abd. Malek (2015) Investigation Of SRR Parameters On Monopole Antenna Performance. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 683-685. ISSN 1819-6608

Ong , Teik Kean and Ahmad, Badrul Hisham and Abd Aziz, Mohamad Zoinol Abidin and Abd. Malek, Mohd Fareq (2014) Design of Wideband Monopole Antenna with CPW Feeding Technique. Advanced Science Letters, 20 (1). pp. 1-4. ISSN 1936-6612

Osman, Khairuddin and Rahmat, Mohd Fua'ad and Zainal Abidin , Amar Faiz and Mohd Khairuddin, Ismail (2014) Tracking Performances Of A Hot Air Blower System Using Different Types Of Controllers. Journal of Theoretical and Applied Information Technology. pp. 385-393. ISSN 1992-8645

Osman, Edynoor and Abd Rashid, Mohd Warikh and T., Moriga and K., Murai and Abd Manaf, Mohd Edeerozey (2017) Transparent Coating Oxide - Indium Zinc Oxide As Conductive Coating : A Review. Reviews On Advanced Materials Science, 49. pp. 150-157. ISSN 1605-8127

Osman, Mohd Hairizal and Ab Rahman, Mohd Hidayat and Ahmad, Mohd Nazri and Wahid, Mohammad Khalid and Maidin, Nurul Ain (2017) A Study Of Optimization For Surface Finish On Drilling Process Of AISI D2 Tool Steel. International Journal Of Applied Engineering Research, 12. 9644-9652 . ISSN 0973-4562

Othman, Mohd Azlishah and Sinnappa, Mohan and Azman, Hazwani and Abd Aziz, Mohamad Zoinol Abidin and Husain, Mohd Nor and Ismail, Mohd Muzafar and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Meor Said, Maizatul Alice and Ramlee, Ridza Azri (2013) An Analysis Of 5.8 GHz Microwave Doppler Radar For Heartbeat Detection. Przeglad Elektrotechniczny, 89 (11). pp. 202-205. ISSN 0033-2097

Othman, Mohd Azlishah and Sinnappa, Mohan and Husain, Mohd Nor and Abd Aziz, Mohamad Zoinol Abidin and Ismail, Mohd Muzafar (2013) Development Of 5.8 GHz Microstrip Parallel Coupled Line Bandpass Filter For Wireless Communication System. International Journal Of Engineering And Technology (IJET), 5 (4). pp. 3227-3235. ISSN 2319-8613

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Ahmad Murad, Murzidah and Kamarudin, Mohd Fauzi (2014) Factors Influencing Safety Management Systems In Petrochemical Processing Plants. Journal of Technology Management and Technopreneurship, 2 (2). pp. 27-39. ISSN 2231-7996

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Ahmad Murad, Murzidah and Kamarudin, Mohd Fauzi (2014) Factors Influencing Safety Management Systems Petrochemical Processing Plants. Journal of Technology Management and Technopreneurship, 2 (2). pp. 27-39. ISSN 2231-7996

Othman, Norfaridatul Akmaliah and Jabar, Juhaini and Sallehuddin, Nur Syazwani and Kamarudin, Mohd Fauzi (2014) Safety Management Systems Implementation : A Study Utilizing In The Grounded Theory Analysis. Journal of Human Capital Development, 7 (2). pp. 11-31. ISSN 1985-7012

Othman, Radzali and Mustafa, Zaleha and Ishak, Nor Fatiha and Pham, Trung Kien and Shamsudin, Zurina and Mohd Rosli, Zulkifli and Mohd Noor, Ahmad Fauzi (2018) Intermediate Phases Formed During Synthesis Of β-Tricalcium Phosphate Via Wet Precipitation And Hydrothermal Methods. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 48 (2). pp. 141-147. ISSN 2289-7879

Othman, Zuraini and Abdullah, Azizi (2018) Adaptive Threshold And Piecewise Fitting For Iris Localisation. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 153-158. ISSN 2180-1843

Padmanathan, Vinothini and Halim, Isa and Too, Yi Wei (2019) Application Of Pressure Biofeedback Unit As Part Of Ergonomics Assessment Tools For Assessing Back Pain Among Computer Users. International Journal Of Advanced Trends In Computer Science And Engineering, 8 (3). pp. 879-882. ISSN 2278-3091

Parnon, Mohamad Afiq Amiruddin and Abdul Rasib, Amir Hamzah (2019) Analysis On NOx Formation Of Biofuels. International Journal Of Engineering & Technology, 8 (1.1). pp. 98-103. ISSN 2227-524X

Patakor, Fizatul Aini and Jantan, Normah and Sulaiman, Marizan and Salleh, Zulhisyam (2017) Auto-Tuning Sliding Mode Contol For Induction Motor Drives. Ieee Xplore. pp. 77-82. ISSN -

Patakor, Fizatul Aini and Sulaiman , Marizan and Ibrahim, Zulkifilie (2011) Comparison Performance Of Induction Motor Using SVPWM And Hysteresis Current Controller. Journal of Theoretical and Applied Information Technology, 30 (1). pp. 10-17. ISSN 1992-8645

Pay, Jun Liew and Jingsi, Wang (2019) Repair Of Ultrasonic Machining Induced Surface/Subsurface Cracks By Laser Irradiation. Optics & Laser Technology, 111. pp. 497-508. ISSN 0030-3992

Perumal, Puvanasvaran and Robert, Kerk Swee Tian and Vasu, Suresh (2014) Lean Environmental Management Integration System For Sustainability Of ISO 14001:2004 Standard Implementation. Journal of Industrial Engineering And Management, 7 (5). pp. 1124-1144. ISSN 2104-8423

Phoo, Kho Shin and Abd Aziz, Mohamad Zoinol Abidin and Othman, Mohd Azlishah and Suaidi , Mohamad Kadim and Mohamad@Sulaiman, Hanissah and F., Abd. Malek (2015) Parametric Study Of Broadband Inverted Suspended Linear Polarized Antenna. ARPN Journal Of Engineering And Applied Sciences, 10. pp. 1374-1377. ISSN 1819-6608

Piramli, Muhamad Marzuki and Abdul Rahman, Ahmad Fadzli Nizam and Abdullah, Siti Fairuz (2016) Rice Grain Grading Classification Based On Perimeter Using Moore-Neighbor Tracing Method. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 8 (2). pp. 23-27. ISSN 2289-8131

Poh, Kiat Ng and Ka, Xuan Chai and Shiong, Lung Leh and Meng, Chauw Bee and Qiao, Hui Boon and Saptari, Adi (2014) Applying Clockwise And Counterclockwise Torque Directions In Pinch Grips : A Descriptive Study. Applied Mechanics and Materials, 465-46 (-). pp. 1170-1174. ISSN 1660-9336

Poh, Kiat Ng and Meng, Chauw Bee and Saptari, Adi and Mohamad, Nor Akramin (2014) A Review Of Different Pinch Technique. Theoretical Issues in Ergonomics Science, 15 (5). pp. 517-533. ISSN -

Poh, Kiat Ng and Qiao, Hui Boon and Ka, Xuan Chai and Shiong, Lung Leh and Meng, Chauw Bee and Saptari, Adi (2014) The Roles Of Shape And Size In The Pinch Effort Of Screw Knobs. Applied Mechanics and Materials, 465-46 (-). pp. 1202-1206. ISSN 1660-9336

Poh, Kiat Ng and Saptari, Adi (2015) Effects Of Pinch Technique, Torque Direction And Sensation On The Pinch Force In Loaded And Unloaded Conditions. Modern Applied Science, 9 (13). pp. 163-175. ISSN 1913-1844

Poh, Kiat Ng and Saptari, Adi and Jian, Ai Yeow (2014) Synthesising The Roles Of Torque And Pinch Force : A Framework. Theoretical Issues In Ergonomics Science, 15 (2). pp. 193-204. ISSN -

Poh, Kiat Ng and Saptari, Adi and Kian, Siong Jee and Tan, Yue Hang (2015) The Effects Of Size On Pinch Force In Loaded And Unloaded Conditions. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 58-67. ISSN 1991-8178

Poh, Kiat Ng and Saptari, Adi and Kian, Siong Jee and Tan, Yue Hang (2015) Torque Direction And Its Influence On Pinch Force In Loaded And Unloaded Conditions. Australian Journal of Basic and Applied Sciences, 9 (19). pp. 73-79. ISSN 1991-8178

Poh, Kiat Ng and Saptari, Adi and Qiao, Hui Boon and Meng, Chauw Bee and Ka, Xuan Chai and Shiong, Lung Leh (2014) Pinch Effort Variations With Torque, Shape And Size, Sensation And Technique. Journal of Applied Sciences, 14 (5). pp. 401-414. ISSN 1812-5654

Pongot, Kamil and Othman , Abdul Rani and Zakaria, Zahriladha and Suaidi, Mohamad Kadim and Hamidon, Abdul Hamid (2014) New Topology LNA Architecture Using Inductive Drain Feedback Technique For Wireless Application. TELKOMNIKA Indonesian Journal of Electrical Engineering, 12 (12). pp. 1-2. ISSN 2302-4046

Prajanto Wahyu, Adi and Farah Zakiyah, Rahmanti and Nor Azman, Abu (2016) High Quality Image Steganography on Integer Haar Wavelet Transform Using Modulus Function. 2015 International Conference On Science In Information Technology (ICSITech). pp. 79-84. ISSN 978-147998386-5

Pratiwi, Lustiana and Choo, Yun Huoy and Draman @ Muda, Azah Kamilah (2011) A Comparative Performance Analysis of Gaussian Distribution Functions in Ant Swarm Optimized Rough Reducts. International Journal on New Computer Architectures and Their Applications (IJNCAA), 1 (4). pp. 917-933. ISSN 2220-9085

Putra, Azma and Ab. Latif, Nurain Shyafina and Thompson, David J. and Muhammad, Noryani and Mohd Nor, Mohd Jailani and Nuawi, Zaki (2014) Modelling sound radiation from a baffled vibrating plate for different boundary conditions using an elementary source technique. Inter-Noise And Noise-Con Congress And Conference Proceedings, 249 (-). pp. 5812-5819. ISSN -

Putra, Azma and Abd Khair, Fazlin and Mohd Nor, Mohd Jailani (2015) Utilizing Hollow-Structured Bamboo As Natural Sound Absorber. Archives Of Acoustics, 40 (4). pp. 601-608. ISSN 0137-5075

Putra, Azma and Ismail, Ahmad Yusuf (2014) Normal Incidence Of Sound Transmission Loss From Perforated Plates With Micro And Macro Size Holes. Advances in Acoustics and Vibration, 2014 (-). pp. 1-12. ISSN 1687-627X

Putra, Azma and Khai, Hee Or and Selamat, Mohd Zulkefli (2017) Oil Palm Empty Fruit Bunch Fibres As Sustainable Acoustic Absorber. Applied Acoustics, 119. pp. 9-16. ISSN 0003-682X

Puvanasvaran, A. Perumal and Al Amin, Mohamed Sultan and Mohd Syaiful Rizal, Abdul Hamid and Norazlin, Nasir (2014) Exploratory The Transitional Impact From Lean Production To Open Source. Science International (Lahore), 26 (5). pp. 1697-1702. ISSN 1013-5316

Puvanasvaran, A. Perumal and Suresh, Vasu and Norazlin, Nasir (2014) Lean Environmental Management Integration System (LEMIS) Framework Development. International Journal Of Social, Management, Economics And Business Engineering, 8 (12). pp. 3575-3582. ISSN -

Puvanasvaran, A. Perumal and Yee, Hui Hui and Norazlin, Nasir (2014) Managing Waste Elimination Database In Lean Manufacturing: Improve Problem Solving Capability. American Journal Of Engineering And Applied Sciences, 7 (2). pp. 271-281. ISSN 1941-7020

Qasem Ahmed, Sharif Ahmed and Husain, Mohd Nor and Zakaria, Zahriladha and Mohd Zin, Mohd Shahril Izuan and Alhegazi, Ammar (2016) Rectenna Designs For RF Energy Harvesting System : A Review. Journal On Communications Antenna And Propagation (IRECAP), 6 (2). 82 - 89. ISSN 2039-5094

Qasem Ahmed, Sharif Ahmed and Zakaria, Zahriladha and Husain, Mohd Nor and Abu, Maisarah (2016) Microstrip Antenna Design With Circular Polarization Property For RF Energy Harvesting Application. International Journal of Applied Engineering Research, 11 (6). 4398 - 4401. ISSN 0973-4562

Qumrul, Ahsan and Law, Mei Lin and Rose Farahiyan, Munawar and Noraiham, Mohamad (2016) Effect Of Recycled Carbon Fiber Reinforcement On The Wear Behavior Of Epoxy Composite. Journal Of Materials Research, 31 (13). pp. 1900-1907. ISSN 0884-2914

R. Sudha, Nair and Hanipah, Hussin (2016) Shaping The Curriculum: A Characteristics Approach And Its Impact On Teaching And Learning. Social Sciences, 11 (9). pp. 2054-2057. ISSN 1818-5800

Radzid, Amirul Ramzani and Azmi, Mohd Sanusi and A. Jalil, Intan Ermahani and Draman @ Muda, Azah Kamilah and Melhem, Laith Bany and Arbain, Nur Atikah (2018) Framework of page segmentation for Mushaf Al-Quran based on multiphase level segmentation. International Journal of Computer Information Systems and Industrial Management Applications, 10. 028-037. ISSN 2150-7988

Rahim, Siti Lydia and Maidin, Shajahan (2014) Feasibility Study Of Additive Manufacturing Technology Implementation In Malaysian Automotive Industry Using Analytic Hierarchy Process. Advanced Material Research, 903 (-). pp. 450-454. ISSN 1662-8985

Rahmalan, Hidayah and Chong, Wei Shin and Abdul Rahman, Ahmad Fadzli Nizam and Abal Abas, Zuraida and Zainal Abidin, Zaheera and Shibghatullah, Abdul Samad and Naim @ Mohayat, Mohd Hariz (2018) Edutainment Tools For Deaf And Impairment Hearing Children : A Survey. Advanced Science Letters, 4. pp. 1805-1808. ISSN 1936-6612

Raja Abdullah, Raja Izamshah and Hassan, Zulhairy and Kasim, Mohd Shahir and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Sulaiman, Mohd Amri and Subramonian, Sivarao (2014) Cutter Path Strategies For Shoulder Milling Of Thin Deflecting Walls. Advanced Materials Research, 903 (-). pp. 175-180. ISSN 1662-8985

Raja Abdullah, Raja Izamshah and J.P.T. , Mo and S., Ding and A Rahman, Muhamad Arfauz and Mohd Abid, Mohd Asyadi Azam and Kasim, Mohd Shahir (2014) Effect Of Parameter Condition On Surface Roughness For Machining AISI D2 Hardened Tool Steel. Journal of Advanced Manufacturing Technology (JAMT) , 8 (1). pp. 47-56. ISSN 1985-3157

Raja Abdullah, Raja Izamshah and Mohd Nawawi, Nurul Husna and Abu Bakar, Mohd Hadzley and Md Ali, Mohd Amran and Kasim, Mohd Shahir and Sulaiman, Mohd Amri (2014) Effects Of Cutter Geometrical Features On Machining Polyetheretherketones (PEEK) Engineering Plastic. Journal of Mechanical Engineering and Sciences (JMES), 6 (-). pp. 863-872. ISSN 2289-4659

Raja Abdullah, Raja Izamshah and Mohd Zakaria, Muhammad Akmal and Kasim, Mohd Shahir and Mohamed, S.B. (2018) Experimental Analysis On Parameters Affecting The Material Removal Rate In Wire Electrical Discharge Turning Using The Taguchi Method. International Journal Of Mechanical & Mechatronics Engineering (IJMME), 18 (05). pp. 75-82. ISSN 2227-2771

Raja Abdullah, Raja Izamshah and Yu, Aaron Lung and Mohamad, Effendi and Mohd Abid, Mohd Asyadi 'Azam and Sulaiman, Mohd Amri and Liew, Pay Jun and Abdul Aziz, Mohd Sanusi (2015) Optimization Of Milling Parameter For Untreated And Heat Treated Polyetheretherketones (PEEK) Biomaterials. Applied Mechanics And Materials, 761. pp. 293-297. ISSN 1662-7482

Raja Nor Firdaus Kashfi, Raja Othman and Farina, Sulaiman and Suhairi Rizuan, Che Ahmad and Kasrul, Abdul Karim and Auzani, Jidin and Tole, Sutikno and Norhisam, Misron (2016) Design Of Hollow-Rotor Brushless DC Motor. International Journal Of Power Electronics And Drive System (IJPEDS), 7 (2). pp. 387-396. ISSN 2088-8694

Raja Othman, Raja Nor Firdaus Kashfi and Abdullah, Nurfaezah and Ahamat, Amiruddin and Md Zuki, Nor Aishah and Abdul Shukor, Fairul Azhar and Abdul Karim, Kasrul (2019) Assessing Monstrous Fan In Malaysia: Present And Future. Journal Of Open Innovation: Technology, Market, And Complexity, 5 (1). pp. 1-19. ISSN 2199-8531

Raja Othman, Raja Nor Firdaus Kashfi and Che Ahmad, Suhairi Rizuan and M. Z., Aishah and Abdul Shukor, Fairul Azhar and Othman, Md Nazri and Ibrahim, Zulkifilie and Vaithilingam, Chockalingam Aravind (2017) Performance characteristics of non-arc double stator permanent magnet generator. Progress In Electromagnetics Research M, 53. pp. 201-214. ISSN 1937-8726

Raja Othman, Raja Nor Firdaus Kashfi and Sulaiman, Farina and Suhairi Rizuan, Che Ahmad and Abdul Karim, Kasrul and Abdul Shukor, Fairul Azhar and Khamis, Aziah and Norhisam, Misron (2017) Improvement Of Torque Density Spoke Type BLDC Motor Using New Hollow Rotor Topology. International Review Of Electrical Engineering (IREE), 12 (1). pp. 19-25. ISSN 1827- 6660

Rajkumar, Palaniappan and Sundaraj, Kenneth and Nabi, Fizza Ghulam (2018) An Overview Of Breath Phase Detection – Techniques & Applications. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10 (2-7). pp. 33-36. ISSN 2180-1843

Ramdan, Nur Sufiah Akmala and Bani Hashim, Ahmad Yusairi and Kamat, Seri Rahayu and Asmai, S. A. (2014) Techniques on video streaming for back pain prevention. Manufacturing Science and Technology, 2 (4). pp. 67-74. ISSN 2333-2697

Ramlee, Ridza Azri and Tang, Daphne Hui Zyen and Othman, Mohd Azlishah and Ismail, Mohd Muzafar and Sulaiman, Hamzah Asyrani and Misran, Mohamad Harris and Meor Said, Maizatul Alice and Abd Aziz, Mohamad Zoinol Abidin (2013) Mobile Phone Controlling Home Appliances. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 5 (1). pp. 37-46. ISSN 2180-1843

Ramlee, Ridza Azri and Hashim, Nik Mohd Zarifie and Abdul Rahman, Rozeana and Aziz, Khairul Azha A (2014) Machine vision based height measuring system. International Journal of Research in Advent Technology, 2 (8). pp. 48-50. ISSN E-ISSN 2321-9637

Ramlee, Rimashadira and Draman @ Muda, Azah Kamilah and Syed Ahmad, Sharifah Sakinah (2014) PCA versus LDA as dimension reduction for individuality of handwriting in writer verification. Journal of Information Assurance and Security, 9 (6). pp. 367-375. ISSN 1554-1010

Ramli, Mohamad Hafize and Abd. Aziz, Mohamad Zoinol Abidin and Dahalan, Abdul Halim and Othman, Mohd Azlishah and Sulaiman, Hamzah Asyrani (2015) Multiband planar printed monopole antenna with defected reflector for wireless communication system. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 686-690. ISSN 1819-6608

Ramli, Mohd Irman and Nuawi, Mohd Zaki and Abdullah, Samizee and Mohammad Rasani, Mohammad Rasidi and Md Basar, Mohd Farriz and Ahmad, Muhamad Arif Fadli and Kho, Ko Seng (2017) Novel Technique Of Modal Analysis On Small Structure Using Piezoelectric Film Sensor And Accelerometer. ARPN Journal Of Engineering And Applied Sciences, 12 (17). pp. 4902-4912. ISSN 1819-6608

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Ahmad, Muhamad Arif Fadli and Kho, Ko Seng (2017) An Investigation On Light Structure Modal Parameter By Using Experimental Modal Analysis Method Via Piezofilm Sensor. Jurnal Teknologi, 79 (6). pp. 159-165. ISSN 0127-9696

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Thamburaja, P. and Ahmad, Muhamad Arif Fadli and Koh, Ko Seng (2017) An Investigation Of Modal Analysis For Al6061 Between Piezoelectric Film Sensor And Accelerometer. Journal of Built Environment, Technology and Engineering, 2. pp. 112-121. ISSN 0128-1003

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Mohammad Rasani, Mohammad Rasidi and Abdullah, Shahrum and Kho, Ko Seng (2017) Modal Analysis Study On Aluminum 6061 Using Accelerometer And Piezoelectric Film Sensor. International Journal of Applied Engineering Research, 12 (5). pp. 787-792. ISSN 0973-4562

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Salleh, Mohd Shukor and Md Basar, Mohd Farriz (2017) The Study Of EMA Effect On Modal Identification: A Review. Journal Of Mechanical Engineering Technology, 9 (1). pp. 103-121. ISSN 2180-1053

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Abdullah, Shahrum and Mohammad Rasani, Mohammad Rasidi and Kho, Ko Seng and Ahmad, Muhamad Arif Fadli (2017) Novel Technique Of Modal Analysis For Light Structure Via Piezofilm Sensor: A Comparison Study. Jurnal Teknologi, 79 (5-2). pp. 15-20. ISSN 0127-9696

Ramli, Mohd Irman and Nuawi, Mohd. Zaki and Mohammad Rasani, Mohammad Rasidi and Abdullah, Sharum and Fadli Ahmad, Muhamad Arif and Abdullah, Muhammad Fazrin (2018) Development Of Polymer Mechanical Properties Characteristics Using I-KAZ 4D Analysis Method. Jurnal Teknologi , 80. pp. 29-40. ISSN 2180-3722

Ramli, Mohd Zulkifli and Salam, Zainal (2014) A Simple Energy Recovery Scheme To Harvest The Energy From Shaded Photovoltaic Modules During Partial Shading. IEEE Transactions on Power Electronics, 29. 6458 - 6471. ISSN 0885-8993

Ranom, Rahifa and Rahim, N. A. A. and Zainuddin, Hidayat (2018) Mechanism Of The Free Charge Carrier Generation In The Dielectric Breakdown. Journal Of Physics: Conf. Series, 949. pp. 1-11. ISSN 1742-6588

Razak, Muhammad Shahmi and Sulaiman, Mohd Amri and Mat, Siti Asiyah and Ramle, Zuraimi and Mohamad, Effendi and Salleh, Mohd Rizal (2017) The Effect Of Cryogenic Cooling On Surface Roughness Of Titanium Alloy: A Review. Journal Of Advanced Manufacturing Technology (JAMT), 11 (2). pp. 101-114. ISSN 1985-3157

Razak, Nurul Nadia and Yasin, Moh and Zakaria, Zahriladha and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Q-Switched Fiber Laser With A Tungsten Disulfide Saturable Absorber Prepared By The Drop Casting Method. Photonics Letters Of Poland, 9 (3). pp. 103-105. ISSN 2080-2242

Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril (2016) Hydrogen Inlet Pressures Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. ARPN Journal Of Engineering And Applied Sciences, 11 (6). pp. 3875-3882. ISSN 1819-6608

Razali, Muhammad Zuhaili and Abdullah, Abdul Rahim and Wan Mohamed, Wan Ahmad Najmi and Ahmad Khiar, Mohd Shahril and Mohamad Basir, Muhammad Sufyan Safwan (2016) Stack Temperature Parameter Analysis Of Proton Exchange Membrane Fuel Cell (PEMFC) Using Spectrogram. Journal Of Scientific Research And Development, 3 (5). pp. 63-68. ISSN 1115‐7569

Razali, Nadlene and Sapuan, S.M. and Jawaid, Mohammad and Ishak, Mohamad Ridzwan (2015) Mercerization Effect On Morphology And Tensile Properties Of Roselle Fibre. Applied Mechanics And Materials, 754-55. pp. 955-959. ISSN 1662-7482

Razali, Nadlene and Sapuan, S. M. and Jawaid, Mohamad and Ishak, M. R and Yusriah, L (2015) Material Characterization Of Roselle Fibre ( Hibiscus Sabdariffa L .)As Potential Reinforcement Material For Polymer Composites. Fibres And Textiles In Eastern Europe, 6. pp. 23-30. ISSN 1230-3666

Razali, Sazalinsyah and Hashim, Nik Mohd Zarifie and Yahya, Syazrul Zulhazmee and Khairul Azha , A. Aziz and Salleh, Azahari and Mohamad, Najmiah Radiah (2014) Different Approach Of Video Compression Technique : A Study. International Journal of Science and Engineering Applications , 3 (5). pp. 143-149. ISSN 2319-7560

Razi, Atikah and Hidayat, Muhammad Nabil and Seroji, Mohammad Nawawi (2018) Microinverter Topology Based Single-Stage Grid-Connected Photovoltaic System: A Review. Indonesian Journal Of Electrical Engineering And Computer Science, 11 (2). pp. 645-651. ISSN 2502-4752

Razik, Md Ashlyzan and Mat Tahar, Razman and Wan Mahmood, Wan Hasrulnizzam and Mohd Rozar, Norlinda (2015) Integrated Quality Function Deployment (QFD) Model for Dry Bulk Terminal Improvements (DBTI) in Malaysian Ports. Journal of Economics, Business and Management, 3 (4). pp. 413-416. ISSN 1793-8201

Rhonira, Latif (2014) Characterisation Of Sheet Resistivity And Contact Resistivity For Source/Drain Of N-Mosfet Device. Journal Of Telecommunication, Electronic And Computer Engineering, 6 (2). pp. 29-36. ISSN 2180-1843

Ridhwan , Jumaidin (2016) Characteristics Of Thermoplastic Sugar Palm Starch/Agar Blend: Thermal,Tensile,And Physical Properties. International Journal Of Biological Macromolecules, 89. 575–581. ISSN 0141-8130

Robiah, Yusof and Mohd Zaki, Mas'ud and Siti Rahayu, Selamat and Mohd Faizal, Abdollah and Shahrin, Sahib and Rudy Fadhlee, Mohd Dollah (2016) Formulating Generalize Malware Attack Pattern Using Features Selection. ARPN Journal Of Engineering And Applied Sciences, 11 (5). pp. 3385-3390. ISSN 1819-6608

Roseli, Adnan and Zainol, Sabri Adlan and Abdul Munir, Fudhail and Mohamad Nasir, Asnawi (2018) Experimental Study On The Effect Of Intake Air Temperature On The Performance Of Spark Ignition Engine Fueled With Hydrogen Peroxide. ARPN Journal Of Engineering And Applied Sciences, 13. pp. 3388-3394. ISSN 1819-6608

Roslan, Nur Saidatul Akmal and Abdul Hamid, Nurfaizey and Md Isa, Mohamed Hafiz and Muhammad, Noryani and Mansor, Mohd Ridzuan and Abdul Munajat, Nurain (2018) Nylon Electrospun Nanofibre Water Filtration Media For Wastewater Treatment. Materials Research Express, 5 (10). pp. 1-11. ISSN 2053-1591

Rosli, Nor Azwar Syahila and Hasan, Rafidah and Ng, Wai Hoe and Baharudin, Muhammad Khairi and Alkahari, Mohd Rizal (2018) Investigation on process-properties relationship with mechanical properties of lattice-structured cellular material for lightweight application. International Journal Of Engineering And Technology (UAE), 7 (3.17). pp. 1-4. ISSN 2227-524X

Roslina, Ramli and Mohd Annuar, Khalil Azha and Ismail, F. S. (2015) Optimal Pin Fin Heat Sink Arrangement For Solving Thermal Distribution Problem. Advanced Research In Fluid Mechanics And Thermal Sciences, 11 (1). pp. 11-28. ISSN 2289-7879

Rosol, Ahmad Haziq Aiman and Abdul Rahman, Husna and Ismail, Ezzatul Irradah and Irawati, Ninik and Jusoh, Zulzilawati and Abdul Latiff, Anas and Harun, Sulaiman Wadi (2017) Cadmium Selenide Polymer Microfiber Saturable Absorber For Q-Switched Fiber Laser Applications. Chinese Physics Letters, 34 (9). 094202-1. ISSN 0256-307X

Rostam Affendi, Hamzah and Haidi, Ibrahim (2016) Literature Survey On Stereo Vision Disparity Map Algorithms. Journal Of Sensors, 2016. pp. 1-23. ISSN 1687-725X

Rozaimi, Ghazali (2016) Analysis Of 3D Gantry Crane System By PID And VSC For Positioning Trolley And Oscillation Reduction. Jornal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 139-143. ISSN 2180-1843

Rozaimi, Ghazali (2016) Controller Parameter Optimization For An Electro-Hydraulic Actuator System Based On Particle Swarm Optimization Technique. Jurnal Teknologi, 78 (1). 101–108. ISSN 0127-9696

Rozaimi, Ghazali (2016) The Effects Of Parameter Variation In Open-Loop And Closed-Loop Control Scheme For An Electro-Hydraulic Actuator System. International Journal Of Control And Automation, 9 (1). pp. 283-294. ISSN -

Rozaimi, Ghazali (2016) An Experimental Of 3D Gantry Crane System In Motion Control By PID And PD Controller Via PFPSO Optimization. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 133-137. ISSN 2180-1843

Rozaimi, Ghazali (2016) Optimization Of Sliding Mode Control Using Particle Swarm Algorithm For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 71-76. ISSN 2180-1843

Rozaimi, Ghazali (2016) PID Control Tuning Using PSO For Prosthetic Hand System. International Journal Of Applied Engineering Research, 11. pp. 10274-10280. ISSN 0973-4562

Rozaimi, Ghazali (2016) Parameter Estimation Technique Of Nonlinear Prosthetic Hand System. International Journal Of Engineering And Technology, 8. pp. 2161-2168. ISSN 2319-8613

Rozaimi, Ghazali (2016) Position Tracking Optimization For An Electro-Hydraulic Actuator System. Journal Of Telecommunication,Electronic And Computer Engineering, 8 (1). pp. 1-6. ISSN 2180-1843

Rozaimi , Ghazali (2016) Linear And Nonlinear Dynamic Modelling Of Motorized Prosthetic Hand System. Journal of Theoretical and Applied Information Technology, 93 (1). pp. 236-232. ISSN 1992-8645

Rozmi, Ismail and Mohamad Hanif, Md Saad and Mohd Jailani, Mohd Nor and Redzwan, Rosli (2016) Drivers’ Readiness To Use Car Driving Simulator As A Tool To Improve Driving Skill: A Preliminary Study. Jurnal Teknologi, 78 (6-9). pp. 137-142. ISSN 0127-9696

S. S. S. , Ranjit and S. K. , Subramaniam and S. I. , Md Salim (2011) Motion Vector Estimation Search using Hexagon-Diamond Pattern for Video Sequences, Grid Point and Block-Based. Motion Vector Estimation Search using Hexagon-Diamond Pattern for Video , 11 (2). pp. 42-47. ISSN 1473-804x

SAID, MD RADZAI and YAAKOB, MOHD YUHAZRI (2012) On the effect of geometrical designs and failure modes in composite axial crushing: A literature review. Composite Structure, 94 (2012). pp. 802-8012. ISSN 0263-8223

SAID, MD RADZAI and YAAKOB, MOHD YUHAZRI (2012) THE FINITE ELEMENT ANALYSIS ON HEXAGONAL RING UNDER SIMPLE LATERAL LOADING. Global Engineers & Technologists Review, 2 (2). pp. 1-7. ISSN 2231-9700

Sa'adah, Daud and Aida Fazliana, Abdul Kadir and Gan, Chin Kim (2016) The Impacts Of Distributed Photovoltaic Generation On Power Distribution Networks Losses. 2015 IEEE Student Conference On Research And Development (SCOReD). pp. 11-15. ISSN 978-146739572-4

Saad, Muhammad Majdi and Husain, Mohd Nor and Hassan, Nornikman and Abd Aziz, Mohamad Zoinol Abidin and Ahmad, Badrul Hisham and Abdul Malek, Mohamed Fareq (2013) Design A Quadband Frequencies Microstrip Patch Antenna With Double C-Shaped Slot. International Journal Of Engineering And Technology (IJET), 5 (2). pp. 1955-1961. ISSN 2319-8613

Saat, Shahrizal and Fikri, Mohd Nabil and Mohd Tumari, Mohd Zaidi and Abdul Kadir, Ahmad Muzaffar and Abd Rashid, Wan Norhisyam and Wan Hamat, Wan Hassan (2017) Experiment Of Speed Control For An Electric Trishaw Based On Pid Control Algorithm. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 17 (2). pp. 38-45. ISSN 2227-2771

Saat, Shahrizal and Mohd Fozi, Airini An Nadrah and Saealal, Muhammad Salihin and Abd Rashid, Wan Norhisyam and Mohd Sani, Farees Ezwan (2019) Hector SLAM 2D Mapping For Simultaneous Localization And Mapping (SLAM). Journal Of Engineering And Applied Sciences, 14 (16). pp. 5610-5615. ISSN 1816-949X

Sabaruddin, Saiful Akmal and Yusof, Ahmad Anas and Saadun, Mohd Noor Asril and Ghazali, Rozaimi (2017) Application Of Water As Pressure Medium In Hydraulic Hybrid System. Journal Of Engineering And Applied Sciences, 12 (16). pp. 4824-4830. ISSN 1819-6608

Sachit, Fadhil Abdulameer and Mohd Rosli, Mohd Afzanizam and Tamaldin, Noreffendy and Misha, Suhaimi and Abdullah, Amira Lateef (2019) Numerical Investigation And Performance Analysis Of Photovoltaic Thermal PV/T Absorber Designs: A Comparative Study. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 58 (1). pp. 62-77. ISSN 2289-7879

Safarudin Gazali, Herawan and Abdul Hakim, Rohhaizan and Ahmad Faris, Ismail and Shamsul Anuar, Shamsudin and Azma, Putra and Musthafah, Mohd Tahir and Ardika Ridal, Awang (2016) Prediction On Power Produced From Power Turbine As A Waste Heat Recovery Mechanism On Naturally Aspirated Spark Ignition Engine Using Artificial Neural Network. Modelling And Simulation In Engineering, 2016. pp. 1-12. ISSN 1687-5591

Safei, Su'aidi (1991) Pergolakan Pemikiran Ummah (The Unrest Ideas of the Ummah). Berita Darul Iman. pp. 24-15. ISSN 0128-3677

Safian, Mohd Azizul Hikmi and Salleh, Mohd Shukor and Subramonian, Sivarao and Hussein, Nur Izan Syahriah and Sulaiman, Mohd Amri and Yahaya, Saifudin Hafiz (2017) Production Of LM4 Feedstock For Thixoforming By Using Cooling Slope Casting. Journal Of Advanced Manufacturing Technology (JAMT) , 11 (1). pp. 77-90. ISSN 1985-3157

Saiful Bahari, Nurul Iman and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Razali, Muhammad Fahmi and Sakidin, Hamzah and Mohamad Isa, Mohd Sa'ari (2016) Restoration Of Hazy Data Based On Spectral And Statistical Methods. ARPN Journal Of Engineering And Applied Sciences, 11 (11). pp. 6807-6813. ISSN 1819-6608

Saiful Bahari, Nurul Iman and Ahmad, Asmala and Mohd Aboobaider, Burhanuddin and Sakidin, Hamzah and Razali, Muhammad Fahmi and Mohamad Isa, Mohd Saari (2016) Restoration of hazy satellite data based on spectral and statistical methods. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 6807-6813. ISSN 1819-6608

Saiful Izwan, Abd Razak and Izzati Fatimah, Wahab and Mohammed Rafiq, Abdul Kadir and Ahmad Zahran, Md Khudzari and Abdul Halim, Mohd Yusof and Farah Nuruljannah, Dahli and Nadirul Hasraf, Mat Nayan and T. Joseph Sahaya, Anand (2016) Biomimetic Growth Of Hydroxyapatite On Kenaf Fibers. BioResources, 11 (1). pp. 1971-1981. ISSN 1930-2126

Saifullah, Nasrullah and Zahriladha, Zakaria and Salleh, Azahari and Muhamad Fadzil, Muhamad Fadhli and Ab Rashid, Siti Rosmaniza and Jiim, Anthony Bruster (2016) Low Noise Amplifier Application Using Negative Feedback For Ultra-Wideband Applications. ARPN Journal Of Engineering And Applied Sciences, 11 (5). 3295 - 3299. ISSN 1819-6608

Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classic Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation (IJCA), 9 (4). pp. 301-312. ISSN -

Sakthi Velu, Vasanthan and Chong, Shin Horng and Tan, Ming Hui and Md Ghazaly, Mariam (2016) Phenomenological Modeling And Classical Control Of A Pneumatic Muscle Actuator System. International Journal Of Control And Automation, 9 (4). pp. 301-312. ISSN 2005-4297

Sakthivelu, Vasanthan and Chong, Shin Horng and Md Ghazaly, Mariam (2015) Phenomenological Modeling And Classic Control Of Pneumatic Muscle Actuator System. International Journal Of Control And Automation, 8 (1). pp. 1-13. ISSN 2005-4297

Salahuddin, Lizawati and Ismail, Zuraini (2018) Hospital Information Systems (HIS) In The Examination Rooms And Wards:Doctors Perceived Positive Impact On Quality Of Care And Patient Safety. International Journal Of Engineering & Technology (UAE), 07. pp. 871-875. ISSN 2227-524X

Salahuddin, Lizawati and Mohd Yaacob, Noorayisahbe and Abd Ghani, Mohd Khanapi and Abdul Samad, Shibghatullah (2018) A Review On Electronic Personalized Health Records. Journal of Telecommunication, Electronic and Computer Engineering (JTEC) , 10. pp. 77-81. ISSN 2180-1843

Salahuddin, Lizawati and Raja Ikram, Raja Rina and Ismail, Nor Haslinda and Naim @ Mohayat, Mohd Hariz and Hashim, Ummi Rabaah and Ismail, Zuraini (2018) Sociotechnical Factors Influencing Unsafe Use Of Hospital Information Systems:A Qualitative Study In Malaysian Government Hospitals. Health Informatics Journal. pp. 7-21. ISSN 1460-4582

Saleman, Abdul Rafeq and Abdul Munir, Fudhail and Mohamad Zin, Mohd Rody and Yob, Mohd Shukri and Gota, Kikugawa and Taku, Ohara (2018) Heat Transport At Solid-Liquid Interfaces Between Face-Centered Cubic Lattice And Liquid Alkanes. Journal Of Advanced Research In Fluid Mechanics And Thermal Sciences, 44 (1). pp. 123-130. ISSN 2289-7879

Salim, Mohd Azli and Mokhlis, M. and Masripan, Nor Azmmi and Md.Saad, Adzni and Omar, Ghazali (2018) Nano Indentation Studies On Graphene Nanoparticles Reinforced Epoxy Resin As Conductive Ink. International Journal Of Advanced Materials Characterization, 1. pp. 8-11. ISSN 2227-3886/2347-1891

Salim, Mohd Azli and Putra, Azma and Abdullah, Mohd Azman (2014) Mathematical Formulation For Bending Wave In Non-Dispersive Finite Rod. International Review on Modelling & Simulations, 7 (3). pp. 523-530. ISSN 1974-9821

Salim, Mohd Azli and Abdullah, Mohd Azman and Putra, Azma (2014) Predicted Transmissibility Of An Experimental Approach For A Laminated Rubber-Metal Spring. American-Eurasian Journal of Sustainable Agriculture, 8. p. 7. ISSN 1995-0748

Salim, Mohd Azli and Md. Saad, Adzni and Termiti, Zarif Hasif and Omar, Ghazali (2018) Properties Of Graphene And Its Application On Electronic Industries–A Review. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451

Salim, Mohd Azli and Mokhlis, Maizura and Omar, Ghazali and Rahim, N.A.A and Md. Saad, A. (2018) Investigation On Elasticity Rate Of Silver Nano-Particles-Filled Epoxy Conductive Ink. International Journal Of Advanced Materials Characterization, 1 (1). p. 4. ISSN 2636-9451

Salim, Mohd Azli and Termiti, Zarif Hasif and Md. Saad, Adzni and Omar, Ghazali (2018) Analysis On Stress-Strain Performance Of ABS/PLA Material Used In Geospatial Solution. International Journal Of Advanced Materials Characterization, 1 (1). p. 7. ISSN 2636-9451

Salim , Mohd Azli and Putra, Azma and Abdullah, Mohd Azman and Ahmad, Nazirah (2014) Development Of Laminated Rubber-Metal Spring Using Standard Malaysia Rubber Constant Viscosity-60. International Review of Mechanical Engineering (I.RE.M.E.), 8. p. 5. ISSN 1970-8734

Salleh, Azahari and Hashim, Nik Mohd Zarifie and Mohamad, Najmiah Radiah and Ab Hadi, Nik Azran and Abd Aziz, Mohamad Zoinol Abidin (2014) Development Of High Performance And Low Cost Automatic Toll Payment System Using Rfid Technology For Malaysia Environment. International Journal for Advance Research in Engineering and Technology, 2 (X). pp. 1-7. ISSN 2320-6802

Salleh, Azahari and Mohamad, Najmiah Radiah and Hashim, Nik Mohd Zarifie and Abd Aziz, Mohamad Zoinol Abidin and Misran, Mohamad Harris (2014) Design Of Wideband Microstrip Bandpass Filter For S-Band Application. Australian Journal of Basic and Applied Sciences, 8 (4). pp. 843-848. ISSN 1991-8178

Salleh, Azahari and Mohamad, Najmiah Radiah and Hashim, Nik Mohd Zarifie and Abd Aziz, Mohamad Zoinol Abidin and Zakaria, Zahriladha and Ab Hadi, Nik Azran (2015) Development Of Paddy Seed Management By Using Long Range Passive Rfid Technology At Ultra High Frequency Band. International Journal of Applied Engineering Research (IJAER), 10 (13). pp. 33393-33397. ISSN 0973-4562

Salleh, Mohd Shukor and Ishak, Anuar and Mohamad, Effendi and Sukarma, Lukman and Mahmood, Azmi B.R. and A Rahman, Muhamad Arfauz and Yahaya, Saifudin Hafiz and Salleh, Mohd Shukor and Sulaiman, Mohd Amri (2017) Cleaner Production Implementation Using Extended Value Stream Mapping For Enhancing The Sustainability Of Lean Manufacturing. Journal of Advanced Manufacturing Technology (JAMT) , 2289-8 (1). pp. 47-60. ISSN 1985-3157

Salleh, Mohd Shukor and Jaafar, Mohd Fairuz and Raja Abdullah, Raja Izamshah and Hassan, Muhammad Hafiz and Sundi, Syahrul Azwan and Mohd Shahrim, Mohammad Shah All Hafiz and Kasim, Mohd Shahir (2019) Influence On Thrust Force And Delamination For One Shot Drilling Of Carbon Fibre Reinforced Plastic (CFRP). International Journal Of Mechanical And Mechatronics Engineering, 19 (1). pp. 43-56. ISSN 2227-2771

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Safian, Mohd Azizul Hikmi and Yahaya, Saifudin Hafiz (2016) Microstructural Analysis And Mechanical Properties Of LM6 Alloy Processed By Cooling Slope Casting. Journal of Advanced Manufacturing Technology (JAMT) , 10 (2). p. 1. ISSN 1985-3157

Salleh, Mohd Shukor and Mohamad Ishak, Nurul Naili and Yahaya, Saifudin Hafiz and Subramonian, Sivarao and Abdullah, A. (2018) Effect Of Equal Channel Angular Pressing On The Microstructure And Mechanical Properties Of A356 Alloy. Journal Of Advanced Manufacturing Technology, 12. pp. 23-39. ISSN 1985-3157

Salleh, Mohd Shukor and Mohammed, M.N. and Omar, Mohd Zaidi and Sajuri, Zainuddin and Alhawari, Khaled Salem (2015) Trend And Development Of Semisolid Metal Joining Processing. Advances in Materials Science and Engineering, 2015. pp. 1-13. ISSN 1687-8434

Salleh, Mohd Shukor and Abdul Rahman, Mohd Hafizi and Ab. Razak, Mohd Suffian and Mohamad Kamal, Mohamad Ridzuan and Marjom, Zolkarnain and Anuar, Liza and Mohamad Saad, Nur Adzly (2018) Design And Optimization Of Front Lower Control Arm (FLCA) For C-Segment Passenger Car. International Journal Of Engineering & Technology, 7. pp. 71-75. ISSN 09754024, 23198613

Salleh, N. and Shamsudin, Zurina and Mohamad Juoi, Jariah and Mustafa, Zaleha (2017) Effects Of Heating Rates And SBE Loading On Sintered Properties Of Spent Bleach Earth/Recycled Glass Composite. Journal Of Mechanical Engineering And Sciences (JMES), 11 (4). pp. 3104-3115. ISSN 2289-4659

Salleh, Zulhisyam and Sulaiman , Marizan and Omar, Rosli and Patakor, Fizatul Aini (2017) Optimization Of Fuzzy Logic Based For Vector Control Induction Motor Drives. Ieee Xplore. pp. 1-6. ISSN -

Sam, Mei Lee and Saptari, Adi and Salleh, Mohd Rizal and Mohamad, Effendi (2018) Comparison Between Linear Programming And Integer Linear Programming: A Review. International Journal Of Mathematics In Operational Research (IJMOR), 13 (1). pp. 91-106. ISSN 1757-5850

Samsudin, Sharatul Izah and Rahmat, Mohd Fuaad and Abd Wahab, Norhaliza (2014) Nonlinear PI Control With Adaptive Interaction Algorithm For Multivariable Wastewater Treatment Process. Mathematical Problems in Engineering, 1. p. 13. ISSN 1563-5147

Samsudin, Sharatul Izah and Sulaiman, Noor Asyikin and Md Yusop, Azdiana and M. Salim, Sani Irwan (2018) A Comparative Study Of Enhanced Nonlinear PI To Multivariable Nonlinear Plant. Journal Of Telecommunication, Electronic And Computer Engineering (JTEC) , 10. pp. 2-7. ISSN 2180-1843

Saptari, Adi and Halim, Isa and Syed Mohamed, Muhammad Syafiq and Mohd Fauzi, Afifah (2019) Hand Parameters And Walking Stick Design: A Case Study Among Elderly Malaysians. International Journal Of Human And Technology Interaction (Ijhati), 3 (1). pp. 11-18. ISSN 2590-3551

Saptari, Adi and Leau, Jia Xin and Mohamad, Nor Akramin (2015) Optimizing Assembly Line Production through Line Balancing: A Case Study. Applied Mechanics And Materials, 761. pp. 104-108. ISSN 1662-7482

Saptari, Adi and Poh, Kiat Ng (2014) A Review Of Shape And Size Considerations In Pinch Grips. Theoretical Issues in Ergonomics Science, 15 (3). pp. 305-317. ISSN 1463-922X

Saptari, Adi and Salleh, Mohd Rizal and Wong, Soon Lai (2011) Jig Design,Assembly Line Design And Work Station Design And Their Effect To Productivity. Jordan Journal of Mechanical and Industrial Engineering, 5 (1). pp. 9-16. ISSN 1995-6665

Saptari, Adi and Ting, Doris Hui Chii and Jafar, Fairul Azni (2015) Assessment of storage and retrieval system in bulk storage area. The International Daily Journal, 49 (227). pp. 87-92. ISSN 2278-5469

Sarban Singh, Ranjit Singh and Baljit, S.S.S. and Wong, Yan Chiew (2018) Research And Development Of The Hierarchical Switching Charging Discharging System For Continuous Sustainability. Journal of Engineering and Applied Sciences, 12 (7). pp. 8030-8034. ISSN 1816-949X

Sarban Singh, Ranjit Singh and Nurdin, Muhammad Izzat and Wong, Yan Chiew (2019) Raspberry Pi Zero Wireless Monitoring System For Analyzing Solar Photovoltaic Panel. International Journal Of Innovative Technology And Exploring Engineering (IJITEE), 8 (8). pp. 2429-2433. ISSN 2278-3075

Sarban Singh, Ranjit Singh and Sarban Singh, Baljit Singh and Anas, Siti Aisyah and Yunus, Yusof (2015) Continuous Battery Monitoring System (CBMS) For Battery Application. International Journal Of Emerging Trends In Electrical And Electronics, 11 (4). 38 - 43. ISSN 2320-9569

Sarban Singh, Ranjit Singh and Sim, Sau Seong and Anas, Siti Aisyah and Subramaniam, Siva Kumar (2013) Concept Of Increasing Energy Storage Capacity Using Two Energy Banks Via Integrating A Bidirectional Switching System. International Journal of Enhanced Research in Science Technology & Engineering, 2 (3). pp. 1-4. ISSN 2319-7463

Sarban Singh, Ranjit Singh and Wong, Yan Chiew and Sarban Singh, Baljit Singh and Abbod, Maysam (2019) A New Fault Detection System Using Wireless Communication – Assisted With Analog Relays For Grid Electrical Lamp Pole Network. Journal Of Theoretical And Applied Information Technology, 97 (8). pp. 2359-2369. ISSN 1992-8645

Sayed Kushairi, Sayed Nordin and Bushra, Abdul Halim and Mohd Zamzuri, Ab Rashid and Mohd Shahrizan, Othman (2014) The relationship of education and ICT determinants on nation's growth: an empirical analysis of Malaysia and muslim countries. Journal of Human Capital Development, 6 (2). pp. 115-123. ISSN ISSN 1985-7012

Seemork, Jiraporn and Sako, Takumi and Md Ali, Mohd Amran and Yamaguchi, Masayuki (2017) Rheological Response Under Nonisothermal Stretching For Immiscible Blends Of Isotactic Polypropylene And Acrylate Polymer. Journal Of Rheology, 61 (1). pp. 1-11. ISSN 0148-6055

Seha, Mohd Saffar and Fairul Azni, Jafar and Zamberi, Jamaludin (2016) Methodology On Investigating The Influences Of Automated Material Handling System In Automotive Assembly Process. IOP Conference Series: Materials Science And Engineering, 114 (1). pp. 1-10. ISSN 1757-8981

Selamat, Mohd Zulkefli and Ahmad, Mohd Shakir and Mohd Daud, Mohd Ahadlin and Jusoff, Kamaruzaman (2013) The Hybrid Conductive Filler in the Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells. The Hybrid Conductive Filler in the Bipolar Plate for Polymer Electrolyte Membrane Fuel Cells, 7 (3). pp. 72-77. ISSN ISSN 1991-8178

Selamat, Mohamad Hisyam and Shibghatullah, Abdul Samad and Mohamad Nor, Mohamad Naimi (2005) MANAGING INFORMATION FOR ORGANISATIONAL LEARNING FROM THE PERSPECTIVE OF TACIT KNOWLEDGE DIFFUSION AND META-ABILITIES. MANAGING INFORMATION FOR ORGANISATIONAL LEARNING FROM THE PERSPECTIVE OF TACIT KNOWLEDGE DIFFUSION AND META-ABILITIES. pp. 1-15. ISSN -

Selamat, Mohd Zulkefli and Ahadlin, Mohd Daud and YAAKOB, MOHD YUHAZRI and Azma, Putra and Sivakumar, Dhar Malingam (2016) Mechanical properties of polypropylene composites reinforced with alkaline treated pineapple leaf fibre from Josapine cultivar. International Journal of Automotive and Mechanical Engineering (IJAME), 13 (1). pp. 3157-3167. ISSN 2180-1606

Selamat, Mohd Zulkefli and Razi, Mashitah and Kasim, Ayu Natasya and Dhar Malingam, Sivakumar and Putra, Azma and Yaakob, Mohd Yuhazri and Mohd Daud, Mohd Ahadlin (2016) Mechanical properties of starch composite reinforced by pineapple leaf fiber (PLF) from josapine cultivar. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608

Selamat, Mohd Zulkefli and Sahadan, Siti Norbaya and Dhar Malingam, Sivakumar and Sudiana, Yayan and Mohamad, Noraiham (2017) Epoxy/carbon black/graphite composite bipolar plate prepared by high speed mixing technique. Proceedings Of Mechanical Engineering Research Day 2017. pp. 410-412. ISSN -

Selamat, Mohd Zulkefli and Sivakumar, Dhar Malingam and Azma, Putra and Ahadlin, Mohd Daud and Yuhazri, Yaakob (2016) MECHANICAL PROPERTIES OF STARCH COMPOSITE REINFORCED BY PINEAPPLE LEAF FIBER (PLF) FROM JOSAPINE CULTIVAR. ARPN Journal Of Engineering And Applied Sciences, 11 (16). pp. 9783-9788. ISSN 1819-6608

Selamat, Nur Asmiza and Mohamad Basir, Muhammad Sufyan Safwan and Abdullah, Abdul Rahim and Musa, Haslinda and Ranom, Rahifa (2017) Lead Acid Battery Analysis Using S-Transform. International Journal on Advanced Science Engineering Information Technology(IJASEIT), 7. p. 8. ISSN 2088-5334

Shaaban, Azizah and Mohamad Yatim, Norazlina and Dimin @ Mohd Amin, Mohd Fairuz and Yusof, Faridah and Abd Razak, Jeefferie (2017) Multiwalled carbon nanotubes enhancing nitrogen uptake and use efficiency of urea fertlizer by paddy. Jurnal Teknologi, 79 (5-2). pp. 105-109. ISSN 0127-9696